diff options
Diffstat (limited to 'arch/blackfin/mach-bf561/boards/ezkit.c')
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/ezkit.c | 68 |
1 files changed, 59 insertions, 9 deletions
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 9b93e2f9579..ab7a487975f 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -14,6 +14,7 @@ #include <linux/spi/spi.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/delay.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -74,7 +75,7 @@ static struct resource isp1362_hcd_resources[] = { }, { .start = IRQ_PF8, .end = IRQ_PF8, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -274,8 +275,8 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD183X) \ - || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -328,14 +329,16 @@ static struct platform_device bfin_spi0_device = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SND_BLACKFIN_AD183X) \ - || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { - .modalias = "ad1836", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .chip_select = 4, + .platform_data = "ad1836", /* only includes chip name for the moment */ .controller_data = &ad1836_spi_chip_info, + .mode = SPI_MODE_3, }, #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) @@ -377,8 +380,8 @@ static struct platform_device bfin_device_gpiokeys = { #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = 1, - .scl_pin = 0, + .sda_pin = GPIO_PF1, + .scl_pin = GPIO_PF0, .sda_is_open_drain = 0, .scl_is_open_drain = 0, .udelay = 40, @@ -420,6 +423,30 @@ static struct platform_device bfin_dpmc = { }, }; +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +static struct platform_device bfin_tdm = { + .name = "bfin-tdm", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +static struct platform_device bfin_ac97 = { + .name = "bfin-ac97", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, @@ -467,6 +494,18 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, #endif + +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) + &bfin_i2s, +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) + &bfin_tdm, +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_ac97, +#endif }; static int __init ezkit_init(void) @@ -484,6 +523,17 @@ static int __init ezkit_init(void) SSYNC(); #endif +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) + bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15)); + bfin_write_FIO0_FLAG_S(1 << 15); + SSYNC(); + /* + * This initialization lasts for approximately 4500 MCLKs. + * MCLK = 12.288MHz + */ + udelay(400); +#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } |