diff options
Diffstat (limited to 'arch/blackfin/mach-bf537')
| -rw-r--r-- | arch/blackfin/mach-bf537/include/mach/blackfin.h | 6 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/include/mach/defBF534.h | 61 |
2 files changed, 0 insertions, 67 deletions
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h index eab006d260c..a12d4b6a221 100644 --- a/arch/blackfin/mach-bf537/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h @@ -40,10 +40,4 @@ #define OFFSET_SCR 0x1C /* SCR Scratch Register */ #define OFFSET_GCTL 0x24 /* Global Control Register */ -/* PLL_DIV Masks */ -#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ - #endif diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h index a6d20ca5768..868e1a13994 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -958,67 +958,6 @@ ** modifier UNLESS the lower order bits are saved and ORed back in when ** the macro is used. *************************************************************************************/ -/* -** ********************* PLL AND RESET MASKS ****************************************/ -/* PLL_CTL Masks */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* PLL Not Powered */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Enter Deep Sleep Mode */ -#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#define BYPASS 0x0100 /* Bypass the PLL */ -#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ -#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ -#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ -#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ -#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 |