1 files changed, 2 insertions, 70 deletions

diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 635c91c526a..3e955dba895 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -4,36 +4,9 @@
  * Licensed under the GPL-2 or later
  */
 
-#include <linux/serial.h>
 #include <asm/dma.h>
 #include <asm/portmux.h>
 
-#define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
-#define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
-#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
-#define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
-#define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
-#define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
-
-#define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
-#define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
-#define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
-#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
-#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
-#define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
-#define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
-#define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
-
-#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
-#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
-#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
-#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
-
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
@@ -54,49 +27,6 @@
 # endif
 #endif
 
-#define BFIN_UART_TX_FIFO_SIZE	2
-
-/*
- * The pin configuration is different from schematic
- */
-struct bfin_serial_port {
-        struct uart_port        port;
-        unsigned int            old_status;
-	int			status_irq;
-	unsigned int lsr;
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	int			tx_done;
-	int			tx_count;
-	struct circ_buf		rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int			rx_dma_nrows;
-	unsigned int		tx_dma_channel;
-	unsigned int		rx_dma_channel;
-	struct work_struct	tx_dma_workqueue;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	int		cts_pin;
-	int 		rts_pin;
-#endif
-};
-
-/* The hardware clears the LSR bits upon read, so we need to cache
- * some of the more fun bits in software so they don't get lost
- * when checking the LSR in other code paths (TX).
- */
-static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
-{
-	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
-	uart->lsr |= (lsr & (BI|FE|PE|OE));
-	return lsr | uart->lsr;
-}
-
-static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
-{
-	uart->lsr = 0;
-	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
-}
-
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -145,3 +75,5 @@ struct bfin_serial_res bfin_serial_resource[] = {
 };
 
 #define DRIVER_NAME "bfin-uart"
+
+#include <asm/bfin_serial.h>