1 files changed, 141 insertions, 0 deletions
diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
new file mode 100644
index 00000000000..cc9ae38a4dd
--- /dev/null
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -0,0 +1,141 @@
+if (BF537 || BF534 || BF536)
+
+menu "BF537 Specific Configuration"
+
+comment "PORT F/G Selection"
+choice
+	prompt "Select BF537/6/4 default GPIO PFx PORTx"
+	help
+	  Quick Hack for BF537/6/4 default GPIO PFx PORTF.
+
+config BF537_PORT_F
+	bool "Select BF537/6/4 default GPIO PFx PORTF"
+	depends on (BF537 || BF536 || BF534)
+	help
+	  Quick Hack for BF537/6/4 default GPIO PFx PORTF.
+
+config BF537_PORT_G
+	bool "Select BF537/6/4 default GPIO PFx PORTG"
+	depends on (BF537 || BF536 || BF534)
+	help
+	  Quick Hack for BF537/6/4 default GPIO PFx PORTG.
+
+config BF537_PORT_H
+	bool "Select BF537/6/4 default GPIO PFx PORTH"
+	depends on (BF537 || BF536 || BF534)
+	help
+	  Quick Hack for BF537/6/4 default GPIO PFx PORTH
+	  Use only when Blackfin EMAC support is not required.
+
+endchoice
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+	int "IRQ_PLL_WAKEUP"
+	default 7
+config IRQ_DMA_ERROR
+	int "IRQ_DMA_ERROR Generic"
+	default 7
+config IRQ_ERROR
+	int "IRQ_ERROR: CAN MAC SPORT0 SPORT1 SPI UART0 UART1"
+	default 7
+config IRQ_RTC
+	int "IRQ_RTC"
+	default 8
+config IRQ_PPI
+	int "IRQ_PPI"
+	default 8
+config IRQ_SPORT0_RX
+	int "IRQ_SPORT0_RX"
+	default 9
+config IRQ_SPORT0_TX
+	int "IRQ_SPORT0_TX"
+	default 9
+config IRQ_SPORT1_RX
+	int "IRQ_SPORT1_RX"
+	default 9
+config IRQ_SPORT1_TX
+	int "IRQ_SPORT1_TX"
+	default 9
+config IRQ_TWI
+	int "IRQ_TWI"
+	default 10
+config IRQ_SPI
+	int "IRQ_SPI"
+	default 10
+config IRQ_UART0_RX
+	int "IRQ_UART0_RX"
+	default 10
+config IRQ_UART0_TX
+	int "IRQ_UART0_TX"
+	default 10
+config IRQ_UART1_RX
+	int "IRQ_UART1_RX"
+	default 10
+config IRQ_UART1_TX
+	int "IRQ_UART1_TX"
+	default 10
+config IRQ_CAN_RX
+	int "IRQ_CAN_RX"
+	default 11
+config IRQ_CAN_TX
+	int "IRQ_CAN_TX"
+	default 11
+config IRQ_MAC_RX
+	int "IRQ_MAC_RX"
+	default 11
+config IRQ_MAC_TX
+	int "IRQ_MAC_TX"
+	default 11
+config IRQ_TMR0
+	int "IRQ_TMR0"
+	default 12
+config IRQ_TMR1
+	int "IRQ_TMR1"
+	default 12
+config IRQ_TMR2
+	int "IRQ_TMR2"
+	default 12
+config IRQ_TMR3
+	int "IRQ_TMR3"
+	default 12
+config IRQ_TMR4
+	int "IRQ_TMR4"
+	default 12
+config IRQ_TMR5
+	int "IRQ_TMR5"
+	default 12
+config IRQ_TMR6
+	int "IRQ_TMR6"
+	default 12
+config IRQ_TMR7
+	int "IRQ_TMR7"
+	default 12
+config IRQ_PROG_INTA
+	int "IRQ_PROG_INTA"
+	default 12
+config IRQ_PORTG_INTB
+	int "IRQ_PORTG_INTB"
+	default 12
+config IRQ_MEM_DMA0
+	int "IRQ_MEM_DMA0"
+	default 13
+config IRQ_MEM_DMA1
+	int "IRQ_MEM_DMA1"
+	default 13
+config IRQ_WATCH
+	int "IRQ_WATCH"
+	default 13
+
+	help
+	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
+	  This applies to all the above.  It is not recommended to assign the
+	  highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif