aboutsummaryrefslogtreecommitdiff
path: root/arch/avr32/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/avr32/boards')
-rw-r--r--arch/avr32/boards/atngw100/setup.c10
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c11
-rw-r--r--arch/avr32/boards/favr-32/setup.c2
-rw-r--r--arch/avr32/boards/hammerhead/setup.c2
-rw-r--r--arch/avr32/boards/merisc/setup.c2
-rw-r--r--arch/avr32/boards/mimc200/setup.c2
6 files changed, 10 insertions, 19 deletions
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index fafed4c38fd..7c756fb189f 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -90,11 +90,6 @@ static struct mtd_partition nand_partitions[] = {
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
.cle = 21,
@@ -102,7 +97,8 @@ static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
.rdy_pin = GPIO_PIN_PB(28),
.enable_pin = GPIO_PIN_PE(23),
.bus_width_16 = true,
- .partition_info = nand_part_info,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(nand_partitions),
};
#endif
@@ -113,7 +109,7 @@ struct eth_addr {
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static struct spi_board_info spi0_board_info[] __initdata = {
{
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 6ce30fb2ec9..c56ddac85d6 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -90,18 +90,13 @@ static struct mtd_partition nand_partitions[] = {
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
-
static struct atmel_nand_data atstk1006_nand_data __initdata = {
.cle = 21,
.ale = 22,
.rdy_pin = GPIO_PIN_PB(30),
.enable_pin = GPIO_PIN_PB(29),
- .partition_info = nand_part_info,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(num_partitions),
};
#endif
@@ -110,7 +105,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2] = {
+static struct macb_platform_data __initdata eth_data[2] = {
{
/*
* The MDIO pullups on STK1000 are a bit too weak for
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 86fab77a5a0..27bd6fbe21c 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -50,7 +50,7 @@ struct eth_addr {
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1] = {
+static struct macb_platform_data __initdata eth_data[1] = {
{
.phy_mask = ~(1U << 1),
},
diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c
index da14fbdd4e8..9d1efd1cd42 100644
--- a/arch/avr32/boards/hammerhead/setup.c
+++ b/arch/avr32/boards/hammerhead/setup.c
@@ -102,7 +102,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1];
+static struct macb_platform_data __initdata eth_data[1];
/*
* The next two functions should go away as the boot loader is
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index e61bc948f95..ed137e33579 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -52,7 +52,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static int ads7846_get_pendown_state_PB26(void)
{
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index c4da5cba2db..05358aa5ef7 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -86,7 +86,7 @@ struct eth_addr {
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static struct spi_eeprom eeprom_25lc010 = {
.name = "25lc010",