diff options
Diffstat (limited to 'arch/avr32/boards/atstk1000/Kconfig')
| -rw-r--r-- | arch/avr32/boards/atstk1000/Kconfig | 58 |
1 files changed, 42 insertions, 16 deletions
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig index 718578f6406..af90b00100f 100644 --- a/arch/avr32/boards/atstk1000/Kconfig +++ b/arch/avr32/boards/atstk1000/Kconfig @@ -1,34 +1,53 @@ # STK1000 customization -if BOARD_ATSTK1002 +if BOARD_ATSTK1000 -config BOARD_ATSTK1002_CUSTOM - bool "Non-default STK-1002 jumper settings" +choice + prompt "ATSTK1000 CPU daughterboard type" + default BOARD_ATSTK1002 + +config BOARD_ATSTK1002 + bool "ATSTK1002" + select CPU_AT32AP7000 + +config BOARD_ATSTK1003 + bool "ATSTK1003" + select CPU_AT32AP7001 + +config BOARD_ATSTK1004 + bool "ATSTK1004" + select CPU_AT32AP7002 + +endchoice + + +config BOARD_ATSTK100X_CUSTOM + bool "Non-default STK1002/STK1003/STK1004 jumper settings" help You will normally leave the jumpers on the CPU card at their default settings. If you need to use certain peripherals, you will need to change some of those jumpers. -if BOARD_ATSTK1002_CUSTOM +if BOARD_ATSTK100X_CUSTOM -config BOARD_ATSTK1002_SW1_CUSTOM +config BOARD_ATSTK100X_SW1_CUSTOM bool "SW1: use SSC1 (not SPI0)" help This also prevents using the external DAC as an audio interface, and means you can't initialize the on-board QVGA display. -config BOARD_ATSTK1002_SW2_CUSTOM +config BOARD_ATSTK100X_SW2_CUSTOM bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)" help If you change this you'll want an updated boot loader putting the console on UART-C not UART-A. -config BOARD_ATSTK1002_SW3_CUSTOM +config BOARD_ATSTK100X_SW3_CUSTOM bool "SW3: use TIMER1 (not SSC0 and GCLK)" help This also prevents using the external DAC as an audio interface. -config BOARD_ATSTK1002_SW4_CUSTOM +config BOARD_ATSTK100X_SW4_CUSTOM bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)" help To use the camera interface you'll need a custom card (on the @@ -36,27 +55,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM config BOARD_ATSTK1002_SW5_CUSTOM bool "SW5: use MACB1 (not LCDC)" + depends on BOARD_ATSTK1002 config BOARD_ATSTK1002_SW6_CUSTOM bool "SW6: more GPIOs (not MACB0)" + depends on BOARD_ATSTK1002 endif # custom -config BOARD_ATSTK1002_SPI1 +config BOARD_ATSTK100X_SPI1 bool "Configure SPI1 controller" - depends on !BOARD_ATSTK1002_SW4_CUSTOM + depends on !BOARD_ATSTK100X_SW4_CUSTOM help All the signals for the second SPI controller are available on GPIO lines and accessed through the J1 jumper block. Say "y" here to configure that SPI controller. -config BOARD_ATSTK1002_J2_LED +config BOARD_ATSTK1000_J2_LED bool - default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB + default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB choice prompt "LEDs connected to J2:" - depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM + depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM optional help Select this if you have jumpered the J2 jumper block to the @@ -64,16 +85,21 @@ choice IDC cable. A default "heartbeat" trigger is provided, but you can of course override this. -config BOARD_ATSTK1002_J2_LED8 +config BOARD_ATSTK1000_J2_LED8 bool "LED0..LED7" help Select this if J2 is jumpered to LED0..LED7 amber leds. -config BOARD_ATSTK1002_J2_RGB +config BOARD_ATSTK1000_J2_RGB bool "RGB leds" help Select this if J2 is jumpered to the RGB leds. endchoice -endif # stk 1002 +config BOARD_ATSTK1000_EXTDAC + bool + depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM + default y + +endif # stk 1000 |