diff options
Diffstat (limited to 'arch/arm')
216 files changed, 1128 insertions, 421 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7c0effb69fc..fdc9d4dbf85 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -366,6 +366,7 @@ config ARCH_MXC select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select HAVE_SCHED_CLOCK help Support for Freescale MXC/iMX-based family of processors @@ -693,7 +694,7 @@ config ARCH_S3C2410 the Samsung SMDK2410 development board (and derivatives). Note, the S3C2416 and the S3C2450 are so close that they even share - the same SoC ID code. This means that there is no seperate machine + the same SoC ID code. This means that there is no separate machine directory (no arch/arm/mach-s3c2450) as the S3C2416 was first. config ARCH_S3C64XX diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 901e6dff843..2cef8e13f9f 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -34,7 +34,7 @@ config PROCESSOR_ID used instead of the auto-probing which utilizes the register. config REMAP_VECTORS_TO_RAM - bool 'Install vectors to the begining of RAM' if DRAM_BASE + bool 'Install vectors to the beginning of RAM' if DRAM_BASE depends on DRAM_BASE help The kernel needs to change the hardware exception vectors. diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 84ac4d65631..adf583cd0c3 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -21,20 +21,12 @@ #if defined(CONFIG_DEBUG_ICEDCC) -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) .macro loadsp, rb, tmp .endm .macro writeb, ch, rb mcr p14, 0, \ch, c0, c5, 0 .endm -#elif defined(CONFIG_CPU_V7) - .macro loadsp, rb, tmp - .endm - .macro writeb, ch, rb -wait: mrc p14, 0, pc, c0, c1, 0 - bcs wait - mcr p14, 0, \ch, c0, c5, 0 - .endm #elif defined(CONFIG_CPU_XSCALE) .macro loadsp, rb, tmp .endm diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 4657e877bf8..2df38263124 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -36,7 +36,7 @@ extern void error(char *x); #ifdef CONFIG_DEBUG_ICEDCC -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) static void icedcc_putc(int ch) { @@ -52,16 +52,6 @@ static void icedcc_putc(int ch) asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch)); } -#elif defined(CONFIG_CPU_V7) - -static void icedcc_putc(int ch) -{ - asm( - "wait: mrc p14, 0, pc, c0, c1, 0 \n\ - bcs wait \n\ - mcr p14, 0, %0, c0, c5, 0 " - : : "r" (ch)); -} #elif defined(CONFIG_CPU_XSCALE) diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 8f0f86db360..97912fa4878 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1045,7 +1045,7 @@ static inline int _loop(unsigned dry_run, u8 buf[], unsigned lcnt0, lcnt1, ljmp0, ljmp1; struct _arg_LPEND lpend; - /* Max iterations possibile in DMALP is 256 */ + /* Max iterations possible in DMALP is 256 */ if (*bursts >= 256*256) { lcnt1 = 256; lcnt0 = 256; @@ -1446,7 +1446,7 @@ int pl330_update(const struct pl330_info *pi) } for (ev = 0; ev < pi->pcfg.num_events; ev++) { - if (val & (1 << ev)) { /* Event occured */ + if (val & (1 << ev)) { /* Event occurred */ struct pl330_thread *thrd; u32 inten = readl(regs + INTEN); int active; diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h index ee5e03efc1b..3ad4c10d0d8 100644 --- a/arch/arm/include/asm/fpstate.h +++ b/arch/arm/include/asm/fpstate.h @@ -18,7 +18,7 @@ * VFP storage area has: * - FPEXC, FPSCR, FPINST and FPINST2. * - 16 or 32 double precision data registers - * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6) + * - an implementation-dependent word of state for FLDMX/FSTMX (pre-ARMv6) * * FPEXC will always be non-zero once the VFP has been used in this process. */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index c7afbc552c7..7e30874377e 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -126,7 +126,7 @@ #endif #if !defined(_CACHE) && !defined(MULTI_CACHE) -#error Unknown cache maintainence model +#error Unknown cache maintenance model #endif #ifndef MULTI_CACHE diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h index 0ec35d1698a..fbf71d75ec8 100644 --- a/arch/arm/include/asm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -10,8 +10,8 @@ * * This file provides the glue to stick the processor-specific bits * into the kernel in an efficient manner. The idea is to use branches - * when we're only targetting one class of TLB, or indirect calls - * when we're targetting multiple classes of TLBs. + * when we're only targeting one class of TLB, or indirect calls + * when we're targeting multiple classes of TLBs. */ #ifdef __KERNEL__ diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h index f35b86e68dd..e4a04e4e562 100644 --- a/arch/arm/include/asm/hardware/pl080.h +++ b/arch/arm/include/asm/hardware/pl080.h @@ -16,7 +16,7 @@ * make it not entierly compatible with the PL080 specification from * ARM. When in doubt, check the Samsung documentation first. * - * The Samsung defines are PL080S, and add an extra controll register, + * The Samsung defines are PL080S, and add an extra control register, * the ability to move more than 2^11 counts of data and some extra * OneNAND features. */ diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h index 833306ee9e7..ea297ac70bc 100644 --- a/arch/arm/include/asm/mach/udc_pxa2xx.h +++ b/arch/arm/include/asm/mach/udc_pxa2xx.h @@ -20,8 +20,6 @@ struct pxa2xx_udc_mach_info { * VBUS IRQ and omit the methods above. Store the GPIO number * here. Note that sometimes the signals go through inverters... */ - bool gpio_vbus_inverted; - int gpio_vbus; /* high == vbus present */ bool gpio_pullup_inverted; int gpio_pullup; /* high == pullup activated */ }; diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 9a87823642d..885be097769 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -249,7 +249,7 @@ do { \ * cache totally. This means that the cache becomes inconsistent, and, * since we use normal loads/stores as well, this is really bad. * Typically, this causes oopsen in filp_close, but could have other, - * more disasterous effects. There are two work-arounds: + * more disastrous effects. There are two work-arounds: * 1. Disable interrupts and emulate the atomic swap * 2. Clean the cache, perform atomic swap, flush the cache * diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h index 47f023aa849..14749aec94b 100644 --- a/arch/arm/include/asm/ucontext.h +++ b/arch/arm/include/asm/ucontext.h @@ -47,7 +47,7 @@ struct crunch_sigframe { #endif #ifdef CONFIG_IWMMXT -/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */ +/* iwmmxt_area is 0x98 bytes long, preceded by 8 bytes of signature */ #define IWMMXT_MAGIC 0x12ef842a #define IWMMXT_STORAGE_SIZE (IWMMXT_SIZE + 8) diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index d2d983be096..bcd66e00bdb 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -25,7 +25,7 @@ .macro addruart, rp, rv .endm -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) .macro senduart, rd, rx mcr p14, 0, \rd, c0, c5, 0 @@ -49,23 +49,6 @@ 1002: .endm -#elif defined(CONFIG_CPU_V7) - - .macro senduart, rd, rx - mcr p14, 0, \rd, c0, c5, 0 - .endm - - .macro busyuart, rd, rx -busy: mrc p14, 0, pc, c0, c1, 0 - bcs busy - .endm - - .macro waituart, rd, rx -wait: mrc p14, 0, pc, c0, c1, 0 - bcs wait - - .endm - #elif defined(CONFIG_CPU_XSCALE) .macro senduart, rd, rx diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 052b509e2d5..1bec8b5f22f 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -338,7 +338,7 @@ static struct miscdevice etb_miscdev = { .fops = &etb_fops, }; -static int __init etb_probe(struct amba_device *dev, const struct amba_id *id) +static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id) { struct tracectx *t = &tracer; int ret = 0; @@ -530,7 +530,7 @@ static ssize_t trace_mode_store(struct kobject *kobj, static struct kobj_attribute trace_mode_attr = __ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store); -static int __init etm_probe(struct amba_device *dev, const struct amba_id *id) +static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id) { struct tracectx *t = &tracer; int ret = 0; diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 8f6ed43861f..23891317dc4 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -594,7 +594,8 @@ static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs) long cpsr = regs->ARM_cpsr; fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn); - regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */ + if (rn != 15) + regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */ rdv = fnr.r1; if (rd == 15) { @@ -622,10 +623,11 @@ static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs) long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd]; long rnv = (rn == 15) ? iaddr + 8 : regs->uregs[rn]; long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + long rnv_wb; - /* Save Rn in case of writeback. */ - regs->uregs[rn] = - insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn); + rnv_wb = insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn); + if (rn != 15) + regs->uregs[rn] = rnv_wb; /* Save Rn in case of writeback. */ } static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs) diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 22e194eb853..69cfee0fe00 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -79,6 +79,7 @@ struct arm_pmu { void (*write_counter)(int idx, u32 val); void (*start)(void); void (*stop)(void); + void (*reset)(void *); const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX]; @@ -204,11 +205,9 @@ armpmu_event_set_period(struct perf_event *event, static u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx) + int idx, int overflow) { - int shift = 64 - 32; - s64 prev_raw_count, new_raw_count; - u64 delta; + u64 delta, prev_raw_count, new_raw_count; again: prev_raw_count = local64_read(&hwc->prev_count); @@ -218,8 +217,13 @@ again: new_raw_count) != prev_raw_count) goto again; - delta = (new_raw_count << shift) - (prev_raw_count << shift); - delta >>= shift; + new_raw_count &= armpmu->max_period; + prev_raw_count &= armpmu->max_period; + + if (overflow) + delta = armpmu->max_period - prev_raw_count + new_raw_count; + else + delta = new_raw_count - prev_raw_count; local64_add(delta, &event->count); local64_sub(delta, &hwc->period_left); @@ -236,7 +240,7 @@ armpmu_read(struct perf_event *event) if (hwc->idx < 0) return; - armpmu_event_update(event, hwc, hwc->idx); + armpmu_event_update(event, hwc, hwc->idx, 0); } static void @@ -254,7 +258,7 @@ armpmu_stop(struct perf_event *event, int flags) if (!(hwc->state & PERF_HES_STOPPED)) { armpmu->disable(hwc, hwc->idx); barrier(); /* why? */ - armpmu_event_update(event, hwc, hwc->idx); + armpmu_event_update(event, hwc, hwc->idx, 0); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } } @@ -624,6 +628,19 @@ static struct pmu pmu = { #include "perf_event_v6.c" #include "perf_event_v7.c" +/* + * Ensure the PMU has sane values out of reset. + * This requires SMP to be available, so exists as a separate initcall. + */ +static int __init +armpmu_reset(void) +{ + if (armpmu && armpmu->reset) + return on_each_cpu(armpmu->reset, NULL, 1); + return 0; +} +arch_initcall(armpmu_reset); + static int __init init_hw_perf_events(void) { diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 6fc2d228db5..f1e8dd94afe 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -474,7 +474,7 @@ armv6pmu_handle_irq(int irq_num, continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event, hwc, idx, 1); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 2e1402556fa..4960686afb5 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -466,6 +466,7 @@ static inline unsigned long armv7_pmnc_read(void) static inline void armv7_pmnc_write(unsigned long val) { val &= ARMV7_PMNC_MASK; + isb(); asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); } @@ -502,6 +503,7 @@ static inline int armv7_pmnc_select_counter(unsigned int idx) val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); + isb(); return idx; } @@ -780,7 +782,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event, hwc, idx, 1); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -847,6 +849,18 @@ static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, } } +static void armv7pmu_reset(void *info) +{ + u32 idx, nb_cnt = armpmu->num_events; + + /* The counter and interrupt enable registers are unknown at reset. */ + for (idx = 1; idx < nb_cnt; ++idx) + armv7pmu_disable_event(NULL, idx); + + /* Initialize & Reset PMNC: C and P bits */ + armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); +} + static struct arm_pmu armv7pmu = { .handle_irq = armv7pmu_handle_irq, .enable = armv7pmu_enable_event, @@ -856,17 +870,15 @@ static struct arm_pmu armv7pmu = { .get_event_idx = armv7pmu_get_event_idx, .start = armv7pmu_start, .stop = armv7pmu_stop, + .reset = armv7pmu_reset, .raw_event_mask = 0xFF, .max_period = (1LLU << 32) - 1, }; -static u32 __init armv7_reset_read_pmnc(void) +static u32 __init armv7_read_num_pmnc_events(void) { u32 nb_cnt; - /* Initialize & Reset PMNC: C and P bits */ - armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); - /* Read the nb of CNTx counters supported from PMNC */ nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; @@ -880,7 +892,7 @@ static const struct arm_pmu *__init armv7_a8_pmu_init(void) armv7pmu.name = "ARMv7 Cortex-A8"; armv7pmu.cache_map = &armv7_a8_perf_cache_map; armv7pmu.event_map = &armv7_a8_perf_map; - armv7pmu.num_events = armv7_reset_read_pmnc(); + armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } @@ -890,7 +902,7 @@ static const struct arm_pmu *__init armv7_a9_pmu_init(void) armv7pmu.name = "ARMv7 Cortex-A9"; armv7pmu.cache_map = &armv7_a9_perf_cache_map; armv7pmu.event_map = &armv7_a9_perf_map; - armv7pmu.num_events = armv7_reset_read_pmnc(); + armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } #else diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 28cd3b025bc..39affbe4fdb 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -246,7 +246,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event, hwc, idx, 1); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -578,7 +578,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event, hwc, idx, 1); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index bfad698a02e..6398ead9d1c 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -119,11 +119,19 @@ ENTRY(cpu_resume) #else ldr r0, sleep_save_sp @ stack phys addr #endif - msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off + setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off #ifdef MULTI_CPU - ldmia r0!, {r1, sp, lr, pc} @ load v:p, stack, return fn, resume fn + @ load v:p, stack, return fn, resume fn + ARM( ldmia r0!, {r1, sp, lr, pc} ) +THUMB( ldmia r0!, {r1, r2, r3, r4} ) +THUMB( mov sp, r2 ) +THUMB( mov lr, r3 ) +THUMB( bx r4 ) #else - ldmia r0!, {r1, sp, lr} @ load v:p, stack, return fn + @ load v:p, stack, return fn + ARM( ldmia r0!, {r1, sp, lr} ) +THUMB( ldmia r0!, {r1, r2, lr} ) +THUMB( mov sp, r2 ) b cpu_do_resume #endif ENDPROC(cpu_resume) diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 7a576092291..40ee7e5045e 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -158,7 +158,7 @@ static int emulate_swpX(unsigned int address, unsigned int *data, if (res == 0) { /* - * Barrier also required between aquiring a lock for a + * Barrier also required between acquiring a lock for a * protected resource and accessing the resource. Inserted for * same reason as above. */ diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 2e74a19874d..295e1e77fa6 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -76,7 +76,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = { .pullup_pin = AT91_PIN_PD9, }; -/* FIXME: user dependant */ +/* FIXME: user dependent */ // static struct at91_cf_data __initdata carmeva_cf_data = { // .det_pin = AT91_PIN_PB0, // .rst_pin = AT91_PIN_PC5, diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h index 27ac6f550fe..02182c16a02 100644 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ b/arch/arm/mach-at91/include/mach/at91_mci.h @@ -102,7 +102,7 @@ #define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ #define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ #define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ -#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */ +#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */ #define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ #define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ #define AT91_MCI_OVRE (1 << 30) /* Overrun */ diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index ddeb6453675..056dc6674b6 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -208,7 +208,7 @@ extern void at91_gpio_resume(void); /*-------------------------------------------------------------------------*/ -/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should +/* wrappers for "new style" GPIO calls. the old AT91-specific ones should * eventually be removed (along with this errno.h inclusion), and the * gpio request/free calls should probably be implemented. */ diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c index 77f84b40dda..a1f328357aa 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c @@ -551,7 +551,7 @@ int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Config /****************************************************************************/ /** -* @brief Check the existance of pending descriptor +* @brief Check the existence of pending descriptor * * This function confirmes if there is any pending descriptor in the chain * to program the channel @@ -775,7 +775,7 @@ int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Cha /** * @brief Read data DMAed to memory * -* This function will read data that has been DMAed to memory while transfering from: +* This function will read data that has been DMAed to memory while transferring from: * - Memory to memory * - Peripheral to memory * @@ -941,7 +941,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurat /** * @brief Sets channel specific user data * -* This function associates user data to a specif DMA channel +* This function associates user data to a specific DMA channel * */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 8d1baf3f468..d87ad30dda3 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -629,7 +629,7 @@ EXPORT_SYMBOL(dma_get_device_descriptor_ring); * Configures a DMA channel. * * @return -* >= 0 - Initialization was successfull. +* >= 0 - Initialization was successful. * * -EBUSY - Device is currently being used. * -ENODEV - Device handed in is invalid. @@ -673,7 +673,7 @@ static int ConfigChannel(DMA_Handle_t handle) /** * Initializes all of the data structures associated with the DMA. * @return -* >= 0 - Initialization was successfull. +* >= 0 - Initialization was successful. * * -EBUSY - Device is currently being used. * -ENODEV - Device handed in is invalid. diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h index 6c8da2b9fc1..e6a1dc484ca 100644 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h @@ -362,7 +362,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurati /** * @brief Read data DMA transferred to memory * -* This function will read data that has been DMAed to memory while transfering from: +* This function will read data that has been DMAed to memory while transferring from: * - Memory to memory * - Peripheral to memory * @@ -446,7 +446,7 @@ void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle * /****************************************************************************/ /** -* @brief Check the existance of pending descriptor +* @brief Check the existence of pending descriptor * * This function confirmes if there is any pending descriptor in the chain * to program the channel @@ -542,7 +542,7 @@ dmacHw_HANDLE_t dmacHw_getInterruptSource(void); /** * @brief Sets channel specific user data * -* This function associates user data to a specif DMA channel +* This function associates user data to a specific DMA channel * */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h index 70eaea866cf..161973385fa 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h @@ -180,7 +180,7 @@ typedef enum { #define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */ -/* Programable pin defines */ +/* Programmable pin defines */ #define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF) /* GPIO pin 0 - 60 */ #define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h index c78833acb37..03238c29900 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h @@ -832,7 +832,7 @@ static inline void chipcHw_setUsbDevice(void) /****************************************************************************/ /** -* @brief Lower layer funtion to enable/disable a clock of a certain device +* @brief Lower layer function to enable/disable a clock of a certain device * * This function enables/disables a core clock * diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h index e01fc4607c9..0aeb6a6fe7f 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h @@ -109,9 +109,9 @@ #define INTCHW_INTC0_DMA0C0 (1<<INTCHW_INTC0_DMA0C0_BITNUM) /* INTC1 - interrupt controller 1 */ -#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */ +#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */ #define INTCHW_INTC1_DDRVPMT_BITNUM 26 /* DDR and VPM HW phase align timeout interrupt (Not for A0) */ -#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interupt (For A0 only)) */ +#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interrupt (For A0 only)) */ #define INTCHW_INTC1_RTC2_BITNUM 25 /* Real time clock tamper interrupt */ #define INTCHW_INTC1_VDEC_BITNUM 24 /* Hantro Video Decoder interrupt */ /* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h index 06a355481ea..0992842caa7 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_umi.h +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -88,7 +88,7 @@ /* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ /* Enable wait pin during burst write or read */ #define REG_UMI_TCR_WAITEN 0x80000000 -/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */ +/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */ #define REG_UMI_TCR_LOWFREQ 0x40000000 /* 1=synch write, 0=async write */ #define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 6c389ff1020..3e7be2de96d 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -11,7 +11,7 @@ * DM644X-EVM board. It has: * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. - * Additionaly realtime clock, IR remote control receiver, + * Additionally realtime clock, IR remote control receiver, * IR Blaster based on MSP430 (firmware although is different * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive * with PATA interface, two muxed red-green leds. diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 4a68c2b1ec1..0a95be1512b 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -167,7 +167,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy) /* * Time measurement across the target() function yields ~1500-1800us * time taken with no drivers on notification list. - * Setting the latency to 2000 us to accomodate addition of drivers + * Setting the latency to 2000 us to accommodate addition of drivers * to pre/post change notification list. */ policy->cpuinfo.transition_latency = 2000 * 1000; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 68fe4c289d7..b95b9196dee 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1123,7 +1123,7 @@ void __init da850_init(void) * This helps keeping the peripherals on this domain insulated * from CPU frequency changes caused by DVFS. The firmware sets * both PLL0 and PLL1 to the same frequency so, there should not - * be any noticible change even in non-DVFS use cases. + * be any noticeable change even in non-DVFS use cases. */ da850_set_async3_src(1); diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 76364d1345d..f6801223964 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -314,7 +314,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why cant' this be disabled? */ + .usecount = 1, /* REVISIT: why can't' this be disabled? */ }; static struct clk timer3_clk = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 9a2376b3137..5f8a6542418 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -274,7 +274,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why cant' this be disabled? */ + .usecount = 1, /* REVISIT: why can't' this be disabled? */ }; static struct clk_lookup dm644x_clks[] = { diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index cea6b897204..957fb87e832 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -4,7 +4,7 @@ * Author: Kevin Hilman, Deep Root Systems, LLC * * Defines the cpu_is_*() macros for runtime detection of DaVinci - * device type. In addtion, if support for a given device is not + * device type. In addition, if support for a given device is not * compiled in to the kernel, the macros return 0 so that * resulting code can be optimized out. * diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index 180b8a9d0d2..a5a9ff70b19 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -101,7 +101,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) { /* - * map discontiguous hw irq range to continous sw irq range: + * map discontiguous hw irq range to continuous sw irq range: * * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) */ diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h index 939728b38d4..be9266b10fd 100644 --- a/arch/arm/mach-exynos4/include/mach/gpio.h +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -18,7 +18,7 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq -/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ +/* Practically, GPIO banks up to GPZ are the configurable gpio banks */ /* GPIO bank sizes */ #define EXYNOS4_GPIO_A0_NR (8) diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index af82a8fbb68..14ac10b7ec0 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -276,7 +276,7 @@ static void exynos4_mct_tick_start(unsigned long cycles, /* update interrupt count buffer */ exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET); - /* enable MCT tick interupt */ + /* enable MCT tick interrupt */ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET); diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c index 1b3d3a2de95..e8d08bf8965 100644 --- a/arch/arm/mach-exynos4/setup-sdhci-gpio.c +++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c @@ -38,14 +38,14 @@ void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-funtion 3 */ + /* Data pin GPK1[3:6] to special-function 3 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } case 4: for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { - /* Data pin GPK0[3:6] to special-funtion 2 */ + /* Data pin GPK0[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c index 85f9433d483..1e83f8cf236 100644 --- a/arch/arm/mach-exynos4/setup-sdhci.c +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -35,7 +35,7 @@ void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ ctrl2 = readl(r + S3C_SDHCI_CONTROL2); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5eec099e0c7..56b930a1344 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -255,6 +255,7 @@ config MACH_IMX27_VISSTRIM_M10 bool "Vista Silicon i.MX27 Visstrim_m10" select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_EHCI diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index cb705c28de0..6269053505f 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -34,6 +34,7 @@ #include <mach/mx25.h> #include <mach/imx-uart.h> #include <mach/audmux.h> +#include <mach/esdhc.h> #include "devices-imx25.h" @@ -242,6 +243,11 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, }; +static struct esdhc_platform_data sd1_pdata = { + .cd_gpio = GPIO_SD1CD, + .wp_gpio = -EINVAL, +}; + /* * system init for baseboard usage. Will be called by cpuimx25 init. * @@ -275,7 +281,7 @@ void __init eukrea_mbimxsd25_baseboard_init(void) imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); imx25_add_flexcan1(NULL); - imx25_add_sdhci_esdhc_imx(0, NULL); + imx25_add_sdhci_esdhc_imx(0, &sd1_pdata); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 773ea0c95b9..ba3dae352a2 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -225,7 +225,7 @@ static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where) /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atux_pci_status(int clear) @@ -332,7 +332,7 @@ static struct pci_ops iop13xx_atux_ops = { /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atue_pci_status(int clear) diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 0a95063f6d3..17de0bf53c0 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -58,6 +58,12 @@ static struct mvsdio_platform_data sheeva_esata_mvsdio_data = { static struct gpio_led sheevaplug_led_pins[] = { { + .name = "plug:red:misc", + .default_trigger = "none", + .gpio = 46, + .active_low = 1, + }, + { .name = "plug:green:health", .default_trigger = "default-on", .gpio = 49, @@ -80,6 +86,7 @@ static struct platform_device sheevaplug_leds = { static unsigned int sheevaplug_mpp_config[] __initdata = { MPP29_GPIO, /* USB Power Enable */ + MPP46_GPIO, /* LED Red */ MPP49_GPIO, /* LED */ 0 }; diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c index f781164e623..24294b2bc46 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -15,7 +15,7 @@ /**************************************************************************** * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * the QNAP firmware. * Layout as used by QNAP: * 0x00000000-0x00080000 : "U-Boot" diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index e76d41bb705..b9c80597b7b 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -41,7 +41,7 @@ * DRAM clocking and refresh are slightly different for systems with DDR * DRAM or regular SDRAM devices. If SDRAM is used in the system, the * SDRAM will still be accessible in direct-run mode. In DDR based systems, - * a transistion to direct-run mode will stop all DDR accesses (no clocks). + * a transition to direct-run mode will stop all DDR accesses (no clocks). * Because of this, the code to switch power modes and the code to enter * and exit DRAM self-refresh modes must not be executed in DRAM. A small * section of IRAM is used instead for this. diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index aeb9ae23e6c..99833b9485c 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -9,7 +9,7 @@ * 2008-04-11: Jason Chagas <Jason.chagas@marvell.com> * 2008-10-08: Bin Yang <bin.yang@marvell.com> * - * The timers module actually includes three timers, each timer with upto + * The timers module actually includes three timers, each timer with up to * three match comparators. Timer #0 is used here in free-running mode as * the clock source, and match comparator #1 used as clock event device. * diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c index 7ffbd987eb5..805d4ee53f7 100644 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ b/arch/arm/mach-msm/acpuclock-arm11.c @@ -343,7 +343,7 @@ int acpuclk_set_rate(unsigned long rate, int for_power_collapse) } } - /* Set wait states for CPU inbetween frequency changes */ + /* Set wait states for CPU between frequency changes */ reg_clkctl = readl(A11S_CLK_CNTL_ADDR); reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ writel(reg_clkctl, A11S_CLK_CNTL_ADDR); diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c index cfa808dd489..232f97a0450 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-msm/scm.c @@ -46,7 +46,7 @@ static DEFINE_MUTEX(scm_lock); * @id: command to be executed * @buf: buffer returned from scm_get_command_buffer() * - * An SCM command is layed out in memory as follows: + * An SCM command is laid out in memory as follows: * * ------------------- <--- struct scm_command * | command header | diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index 80761474c0f..2e288b38b4a 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -43,6 +43,7 @@ #include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/audmux.h> +#include <mach/esdhc.h> #include "devices-imx35.h" #include "devices.h" @@ -163,11 +164,14 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { MX35_PAD_SD1_DATA1__ESDHC1_DAT1, MX35_PAD_SD1_DATA2__ESDHC1_DAT2, MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + /* SD1 CD */ + MX35_PAD_LD18__GPIO3_24, }; #define GPIO_LED1 IMX_GPIO_NR(3, 29) #define GPIO_SWITCH1 IMX_GPIO_NR(3, 25) -#define GPIO_LCDPWR (4) +#define GPIO_LCDPWR IMX_GPIO_NR(1, 4) +#define GPIO_SD1CD IMX_GPIO_NR(3, 24) static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) @@ -254,6 +258,11 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, }; +static struct esdhc_platform_data sd1_pdata = { + .cd_gpio = GPIO_SD1CD, + .wp_gpio = -EINVAL, +}; + /* * system init for baseboard usage. Will be called by cpuimx35 init. * @@ -289,7 +298,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void) imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); imx35_add_flexcan1(NULL); - imx35_add_sdhci_esdhc_imx(0, NULL); + imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); @@ -301,7 +310,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void) gpio_request(GPIO_LCDPWR, "LCDPWR"); gpio_direction_output(GPIO_LCDPWR, 1); - gpio_free(GPIO_LCDPWR); i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index b3ecfb22d24..036ba1a4704 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -40,6 +40,7 @@ #include <mach/mx3fb.h> #include <mach/ulpi.h> #include <mach/audmux.h> +#include <mach/esdhc.h> #include "devices-imx35.h" #include "devices.h" @@ -217,11 +218,15 @@ static iomux_v3_cfg_t pcm043_pads[] = { MX35_PAD_SD1_DATA1__ESDHC1_DAT1, MX35_PAD_SD1_DATA2__ESDHC1_DAT2, MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */ + MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */ }; #define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31) #define AC97_GPIO_TXD IMX_GPIO_NR(2, 28) #define AC97_GPIO_RESET IMX_GPIO_NR(2, 0) +#define SD1_GPIO_WP IMX_GPIO_NR(2, 23) +#define SD1_GPIO_CD IMX_GPIO_NR(2, 24) static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) { @@ -346,6 +351,11 @@ static int __init pcm043_otg_mode(char *options) } __setup("otg_mode=", pcm043_otg_mode); +static struct esdhc_platform_data sd1_pdata = { + .wp_gpio = SD1_GPIO_WP, + .cd_gpio = SD1_GPIO_CD, +}; + /* * Board specific initialization. */ @@ -395,7 +405,7 @@ static void __init pcm043_init(void) imx35_add_fsl_usb2_udc(&otg_device_pdata); imx35_add_flexcan1(NULL); - imx35_add_sdhci_esdhc_imx(0, NULL); + imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); } static void __init pcm043_timer_init(void) diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 83ee08847d4..159340da919 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -165,6 +165,7 @@ config MACH_MX53_LOCO select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS help Include support for MX53 LOCO platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 4f63048be3c..0b9338cec51 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -3,7 +3,7 @@ # # Object file lists. -obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o +obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o obj-$(CONFIG_SOC_IMX50) += mm-mx50.o obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index b2ecd194e76..bea4e4135f9 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -228,13 +228,12 @@ static inline void babbage_fec_reset(void) int ret; /* reset FEC PHY */ - ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset"); + ret = gpio_request_one(BABBAGE_FEC_PHY_RESET, + GPIOF_OUT_INIT_LOW, "fec-phy-reset"); if (ret) { printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); return; } - gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0); - gpio_set_value(BABBAGE_FEC_PHY_RESET, 0); msleep(1); gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); } diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 7b5735c5ea5..2af3f43f74d 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -34,7 +34,7 @@ #include <mach/imx-uart.h> #include <mach/iomux-mx53.h> -#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) +#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6) #define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30) #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) @@ -82,15 +82,14 @@ static inline void mx53_evk_fec_reset(void) int ret; /* reset FEC PHY */ - ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset"); + ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW, + "fec-phy-reset"); if (ret) { printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); return; } - gpio_direction_output(SMD_FEC_PHY_RST, 0); - gpio_set_value(SMD_FEC_PHY_RST, 0); msleep(1); - gpio_set_value(SMD_FEC_PHY_RST, 1); + gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); } static struct fec_platform_data mx53_evk_fec_pdata = { diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 0a18f8d23eb..10a1bea1054 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -36,6 +36,9 @@ #include "crm_regs.h" #include "devices-imx53.h" +#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8) +#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14) +#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15) #define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) static iomux_v3_cfg_t mx53_loco_pads[] = { @@ -180,6 +183,27 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_GPIO_8__GPIO1_8, }; +#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ +{ \ + .gpio = gpio_num, \ + .type = EV_KEY, \ + .code = ev_code, \ + .active_low = act_low, \ + .desc = "btn " descr, \ + .wakeup = wake, \ +} + +static const struct gpio_keys_button loco_buttons[] __initconst = { + GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0), + GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0), + GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0), +}; + +static const struct gpio_keys_platform_data loco_button_data __initconst = { + .buttons = loco_buttons, + .nbuttons = ARRAY_SIZE(loco_buttons), +}; + static inline void mx53_loco_fec_reset(void) { int ret; @@ -215,6 +239,7 @@ static void __init mx53_loco_board_init(void) imx53_add_imx_i2c(1, &mx53_loco_i2c_data); imx53_add_sdhci_esdhc_imx(0, NULL); imx53_add_sdhci_esdhc_imx(2, NULL); + imx_add_gpio_keys(&loco_button_data); } static void __init mx53_loco_timer_init(void) diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 652ace41382..fdbc05ed551 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -865,6 +865,13 @@ static struct clk aips_tz2_clk = { .disable = _clk_ccgr_disable_inwait, }; +static struct clk gpc_dvfs_clk = { + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable, +}; + static struct clk gpt_32k_clk = { .id = 0, .parent = &ckil_clk, @@ -1448,6 +1455,7 @@ static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk) _REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk) _REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk) + _REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk) }; static struct clk_lookup mx53_lookups[] = { @@ -1511,6 +1519,7 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, clk_enable(&iim_clk); mx51_revision(); clk_disable(&iim_clk); + mx51_display_revision(); /* move usb_phy_clk to 24MHz */ clk_set_parent(&usb_phy1_clk, &osc_clk); diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index df46b5e6085..472bdfab2e5 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -21,6 +21,7 @@ static int cpu_silicon_rev = -1; #define IIM_SREV 0x24 +#define MX50_HW_ADADIG_DIGPROG 0xB0 static int get_mx51_srev(void) { @@ -51,6 +52,26 @@ int mx51_revision(void) } EXPORT_SYMBOL(mx51_revision); +void mx51_display_revision(void) +{ + int rev; + char *srev; + rev = mx51_revision(); + + switch (rev) { + case IMX_CHIP_REVISION_2_0: + srev = IMX_CHIP_REVISION_2_0_STRING; + break; + case IMX_CHIP_REVISION_3_0: + srev = IMX_CHIP_REVISION_3_0_STRING; + break; + default: + srev = IMX_CHIP_REVISION_UNKNOWN_STRING; + } + printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev); +} +EXPORT_SYMBOL(mx51_display_revision); + #ifdef CONFIG_NEON /* @@ -107,6 +128,44 @@ int mx53_revision(void) } EXPORT_SYMBOL(mx53_revision); +static int get_mx50_srev(void) +{ + void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K); + u32 rev; + + if (!anatop) { + cpu_silicon_rev = -EINVAL; + return 0; + } + + rev = readl(anatop + MX50_HW_ADADIG_DIGPROG); + rev &= 0xff; + + iounmap(anatop); + if (rev == 0x0) + return IMX_CHIP_REVISION_1_0; + else if (rev == 0x1) + return IMX_CHIP_REVISION_1_1; + return 0; +} + +/* + * Returns: + * the silicon revision of the cpu + * -EINVAL - not a mx50 + */ +int mx50_revision(void) +{ + if (!cpu_is_mx50()) + return -EINVAL; + + if (cpu_silicon_rev == -1) + cpu_silicon_rev = get_mx50_srev(); + + return cpu_silicon_rev; +} +EXPORT_SYMBOL(mx50_revision); + static int __init post_cpu_init(void) { unsigned int reg; diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c index c372a437369..e6c1119c20a 100644 --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c @@ -67,6 +67,10 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { MX51_PAD_SD1_DATA1__SD1_DATA1, MX51_PAD_SD1_DATA2__SD1_DATA2, MX51_PAD_SD1_DATA3__SD1_DATA3, + /* SD1 CD */ + _MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | + PAD_CTL_PKE | PAD_CTL_SRE_FAST | + PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), }; #define GPIO_LED1 IMX_GPIO_NR(3, 30) diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index 868af8f435f..d0c7075937c 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -42,7 +42,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <asm/mach-types.h> #include "devices-imx51.h" #include "devices.h" diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c new file mode 100644 index 00000000000..76ae8dc33e0 --- /dev/null +++ b/arch/arm/mach-mx5/system.c @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/platform_device.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include "crm_regs.h" + +/* set cpu low power mode before WFI instruction. This function is called + * mx5 because it can be used for mx50, mx51, and mx53.*/ +void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) +{ + u32 plat_lpc, arm_srpgcr, ccm_clpcr; + u32 empgc0, empgc1; + int stop_mode = 0; + + /* always allow platform to issue a deep sleep mode request */ + plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) & + ~(MXC_CORTEXA8_PLAT_LPC_DSM); + ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK); + arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR); + empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR); + empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR); + + switch (mode) { + case WAIT_CLOCKED: + break; + case WAIT_UNCLOCKED: + ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET; + break; + case WAIT_UNCLOCKED_POWER_OFF: + case STOP_POWER_OFF: + plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM + | MXC_CORTEXA8_PLAT_LPC_DBG_DSM; + if (mode == WAIT_UNCLOCKED_POWER_OFF) { + ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET; + ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY; + ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS; + stop_mode = 0; + } else { + ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; + ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET; + ccm_clpcr |= MXC_CCM_CLPCR_VSTBY; + ccm_clpcr |= MXC_CCM_CLPCR_SBYOS; + stop_mode = 1; + } + arm_srpgcr |= MXC_SRPGCR_PCR; + + if (tzic_enable_wake(1) != 0) + return; + break; + case STOP_POWER_ON: + ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; + break; + default: + printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode); + return; + } + + __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC); + __raw_writel(ccm_clpcr, MXC_CCM_CLPCR); + __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR); + + /* Enable NEON SRPG for all but MX50TO1.0. */ + if (mx50_revision() != IMX_CHIP_REVISION_1_0) + __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR); + + if (stop_mode) { + empgc0 |= MXC_SRPGCR_PCR; + empgc1 |= MXC_SRPGCR_PCR; + + __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR); + __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR); + } +} diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 4f6f174af6c..4522fbb235d 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -22,6 +22,7 @@ config MACH_MX23EVK select SOC_IMX23 select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB default y help @@ -35,6 +36,7 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC select MXS_HAVE_PLATFORM_FLEXCAN + select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB select MXS_OCOTP default y diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index d133c7f3094..c3577ea789a 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -521,6 +521,15 @@ static int clk_misc_init(void) __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET); + /* + * 480 MHz seems too high to be ssp clock source directly, + * so set frac to get a 288 MHz ref_io. + */ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); + reg &= ~BM_CLKCTRL_FRAC_IOFRAC; + reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); + return 0; } @@ -528,6 +537,12 @@ int __init mx23_clocks_init(void) { clk_misc_init(); + /* + * source ssp clock from ref_io than ref_xtal, + * as ref_xtal only provides 24 MHz as maximum. + */ + clk_set_parent(&ssp_clk, &ref_io_clk); + clk_enable(&cpu_clk); clk_enable(&hbus_clk); clk_enable(&xbus_clk); diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 5e489a2b202..1ad97fed1e9 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -618,6 +618,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("pll2", NULL, pll2_clk) _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk) _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) + _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk) + _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk) _REGISTER_CLOCK("flexcan.0", NULL, can0_clk) _REGISTER_CLOCK("flexcan.1", NULL, can1_clk) _REGISTER_CLOCK(NULL, "usb0", usb0_clk) @@ -737,6 +739,15 @@ static int clk_misc_init(void) reg |= BM_CLKCTRL_ENET_CLK_OUT_EN; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET); + /* + * 480 MHz seems too high to be ssp clock source directly, + * so set frac0 to get a 288 MHz ref_io0. + */ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0); + reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC; + reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0); + return 0; } @@ -744,6 +755,13 @@ int __init mx28_clocks_init(void) { clk_misc_init(); + /* + * source ssp clock from ref_io0 than ref_xtal, + * as ref_xtal only provides 24 MHz as maximum. + */ + clk_set_parent(&ssp0_clk, &ref_io0_clk); + clk_set_parent(&ssp1_clk, &ref_io0_clk); + clk_enable(&cpu_clk); clk_enable(&hbus_clk); clk_enable(&xbus_clk); diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index c7e14f4e366..c6f345febd3 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -21,6 +21,10 @@ extern const struct mxs_auart_data mx23_auart_data[] __initconst; #define mx23_add_auart0() mx23_add_auart(0) #define mx23_add_auart1() mx23_add_auart(1) +extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst; +#define mx23_add_mxs_mmc(id, pdata) \ + mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata) + #define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id) struct platform_device *__init mx23_add_mxsfb( diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 9d08555c4cf..c473eddce8c 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -37,6 +37,10 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst; extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst; #define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id]) +extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst; +#define mx28_add_mxs_mmc(id, pdata) \ + mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata) + #define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id) struct platform_device *__init mx28_add_mxsfb( diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index 1451ad060d8..acf9eea124c 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -15,6 +15,9 @@ config MXS_HAVE_PLATFORM_FLEXCAN config MXS_HAVE_PLATFORM_MXS_I2C bool +config MXS_HAVE_PLATFORM_MXS_MMC + bool + config MXS_HAVE_PLATFORM_MXS_PWM bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 0d9bea30b0a..324f2824d38 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -4,5 +4,6 @@ obj-y += platform-dma.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c new file mode 100644 index 00000000000..382dacbeca2 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid) \ + { \ + .id = _id, \ + .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \ + .dma = soc ## _DMA_SSP ## hwid, \ + .irq_err = soc ## _INT_SSP ## hwid ## _ERROR, \ + .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \ + } + +#define mxs_mxs_mmc_data_entry(soc, _id, hwid) \ + [_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid) + + +#ifdef CONFIG_SOC_IMX23 +const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = { + mxs_mxs_mmc_data_entry(MX23, 0, 1), + mxs_mxs_mmc_data_entry(MX23, 1, 2), +}; +#endif + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = { + mxs_mxs_mmc_data_entry(MX28, 0, 0), + mxs_mxs_mmc_data_entry(MX28, 1, 1), +}; +#endif + +struct platform_device *__init mxs_add_mxs_mmc( + const struct mxs_mxs_mmc_data *data, + const struct mxs_mmc_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->dma, + .end = data->dma, + .flags = IORESOURCE_DMA, + }, { + .start = data->irq_err, + .end = data->irq_err, + .flags = IORESOURCE_IRQ, + }, { + .start = data->irq_dma, + .end = data->irq_dma, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("mxs-mmc", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 71f24484b04..c5137f14c36 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -73,6 +73,19 @@ struct mxs_i2c_data { }; struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data); +/* mmc */ +#include <mach/mmc.h> +struct mxs_mxs_mmc_data { + int id; + resource_size_t iobase; + resource_size_t dma; + resource_size_t irq_err; + resource_size_t irq_dma; +}; +struct platform_device *__init mxs_add_mxs_mmc( + const struct mxs_mxs_mmc_data *data, + const struct mxs_mmc_platform_data *pdata); + /* pwm */ struct platform_device *__init mxs_add_mxs_pwm( resource_size_t iobase, int id); diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index a66994f0518..214e5b641bb 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -28,6 +28,8 @@ #define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18) #define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28) +#define MX23EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30) +#define MX23EVK_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29) static const iomux_cfg_t mx23evk_pads[] __initconst = { /* duart */ @@ -73,6 +75,36 @@ static const iomux_cfg_t mx23evk_pads[] __initconst = { MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL, /* backlight control */ MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL, + + /* mmc */ + MX23_PAD_SSP1_DATA0__SSP1_DATA0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_SSP1_DATA1__SSP1_DATA1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_SSP1_DATA2__SSP1_DATA2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_SSP1_DATA3__SSP1_DATA3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_GPMI_D08__SSP1_DATA4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_GPMI_D09__SSP1_DATA5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_GPMI_D10__SSP1_DATA6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_GPMI_D11__SSP1_DATA7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_SSP1_CMD__SSP1_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_SSP1_DETECT__SSP1_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX23_PAD_SSP1_SCK__SSP1_SCK | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* write protect */ + MX23_PAD_PWM4__GPIO_1_30 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* slot power enable */ + MX23_PAD_PWM3__GPIO_1_29 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), }; /* mxsfb (lcdif) */ @@ -101,6 +133,11 @@ static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = { .ld_intf_width = STMLCDIF_24BIT, }; +static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = { + .wp_gpio = MX23EVK_MMC0_WRITE_PROTECT, + .flags = SLOTF_8_BIT_CAPABLE, +}; + static void __init mx23evk_init(void) { int ret; @@ -110,6 +147,13 @@ static void __init mx23evk_init(void) mx23_add_duart(); mx23_add_auart0(); + /* power on mmc slot by writing 0 to the gpio */ + ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT, + "mmc0-slot-power"); + if (ret) + pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); + mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata); + ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable"); if (ret) pr_warn("failed to request gpio lcd-enable: %d\n", ret); diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 08002d02267..bb329b9a260 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -34,6 +34,11 @@ #define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) #define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) +#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12) +#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28) +#define MX28EVK_MMC0_SLOT_POWER MXS_GPIO_NR(3, 28) +#define MX28EVK_MMC1_SLOT_POWER MXS_GPIO_NR(3, 29) + static const iomux_cfg_t mx28evk_pads[] __initconst = { /* duart */ MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, @@ -115,6 +120,65 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL, /* backlight control */ MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL, + /* mmc0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA1__SSP0_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA2__SSP0_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA3__SSP0_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_CMD__SSP0_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* write protect */ + MX28_PAD_SSP1_SCK__GPIO_2_12 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* slot power enable */ + MX28_PAD_PWM3__GPIO_3_28 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* mmc1 */ + MX28_PAD_GPMI_D00__SSP1_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D01__SSP1_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D02__SSP1_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D03__SSP1_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D04__SSP1_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D05__SSP1_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D06__SSP1_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D07__SSP1_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_RDY1__SSP1_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_WRN__SSP1_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* write protect */ + MX28_PAD_GPMI_RESETN__GPIO_0_28 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* slot power enable */ + MX28_PAD_PWM4__GPIO_3_29 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), }; /* fec */ @@ -258,6 +322,18 @@ static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = { .ld_intf_width = STMLCDIF_24BIT, }; +static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = { + { + /* mmc0 */ + .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT, + .flags = SLOTF_8_BIT_CAPABLE, + }, { + /* mmc1 */ + .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT, + .flags = SLOTF_8_BIT_CAPABLE, + }, +}; + static void __init mx28evk_init(void) { int ret; @@ -297,6 +373,19 @@ static void __init mx28evk_init(void) gpio_set_value(MX28EVK_BL_ENABLE, 1); mx28_add_mxsfb(&mx28evk_mxsfb_pdata); + + /* power on mmc slot by writing 0 to the gpio */ + ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT, + "mmc0-slot-power"); + if (ret) + pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + + ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT, + "mmc1-slot-power"); + if (ret) + pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); + mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); } static void __init mx28evk_timer_init(void) diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index fa0b154da67..0fcff47009c 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -45,7 +45,7 @@ static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = { }; #define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3) -static const iomux_cfg_t tx28_fec_pads[] __initconst = { +static const iomux_cfg_t tx28_fec0_pads[] __initconst = { MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE, MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE, MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE, @@ -57,7 +57,20 @@ static const iomux_cfg_t tx28_fec_pads[] __initconst = { MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE, }; -static const struct fec_platform_data tx28_fec_data __initconst = { +static const iomux_cfg_t tx28_fec1_pads[] __initconst = { + MX28_PAD_ENET0_RXD2__ENET1_RXD0, + MX28_PAD_ENET0_RXD3__ENET1_RXD1, + MX28_PAD_ENET0_TXD2__ENET1_TXD0, + MX28_PAD_ENET0_TXD3__ENET1_TXD1, + MX28_PAD_ENET0_COL__ENET1_TX_EN, + MX28_PAD_ENET0_CRS__ENET1_RX_EN, +}; + +static struct fec_platform_data tx28_fec0_data = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static struct fec_platform_data tx28_fec1_data = { .phy = PHY_INTERFACE_MODE_RMII, }; @@ -108,15 +121,15 @@ int __init tx28_add_fec0(void) pr_debug("%s: Deasserting FEC PHY RESET\n", __func__); gpio_set_value(TX28_FEC_PHY_RESET, 1); - ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads, - ARRAY_SIZE(tx28_fec_pads)); + ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads, + ARRAY_SIZE(tx28_fec0_pads)); if (ret) { pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", __func__, ret); goto free_gpios; } - pr_debug("%s: Registering FEC device\n", __func__); - mx28_add_fec(0, &tx28_fec_data); + pr_debug("%s: Registering FEC0 device\n", __func__); + mx28_add_fec(0, &tx28_fec0_data); return 0; free_gpios: @@ -129,3 +142,19 @@ free_gpios: return ret; } + +int __init tx28_add_fec1(void) +{ + int ret; + + ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads, + ARRAY_SIZE(tx28_fec1_pads)); + if (ret) { + pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", + __func__, ret); + return ret; + } + pr_debug("%s: Registering FEC1 device\n", __func__); + mx28_add_fec(1, &tx28_fec1_data); + return 0; +} diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h index df9e1b6e81b..8ed425457d3 100644 --- a/arch/arm/mach-mxs/module-tx28.h +++ b/arch/arm/mach-mxs/module-tx28.h @@ -7,3 +7,4 @@ * Free Software Foundation. */ int __init tx28_add_fec0(void); +int __init tx28_add_fec1(void); diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 927d5a18176..c1c5fb6a5b4 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -79,7 +79,7 @@ /* - * Register useage + * Register usage * r8 - temporary * r9 - the driver buffer * r10 - temporary diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index d41fe2d0616..0ad781db4e6 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -399,7 +399,7 @@ static void __init omap_sx1_init(void) sx1_mmc_init(); /* turn on USB power */ - /* sx1_setusbpower(1); cant do it here because i2c is not ready */ + /* sx1_setusbpower(1); can't do it here because i2c is not ready */ gpio_request(1, "A_IRDA_OFF"); gpio_request(11, "A_SWITCH"); gpio_request(15, "A_USB_ON"); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index b0f4c231595..36f26c3fa25 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {} * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index 7a2df29400c..23eed0035ed 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -31,7 +31,7 @@ #endif /* - * These are the offsets from the begining of the fiq_buffer. They are put here + * These are the offsets from the beginning of the fiq_buffer. They are put here * since the buffer and header need to be accessed by drivers servicing devices * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 5f8a2fd0633..34cf982b967 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -696,7 +696,7 @@ static void __init igep2_init(void) igep2_init_smsc911x(); /* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep2_wlan_bt_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index b10db0e6ee6..2cf86c3cb1a 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -440,7 +440,7 @@ static void __init igep3_init(void) igep3_leds_init(); /* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep3_wifi_bt_init(); diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab878545bd9..6cb6c03293d 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -258,7 +258,7 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm, * clkdm_init - set up the clockdomain layer * @clkdms: optional pointer to an array of clockdomains to register * @init_autodeps: optional pointer to an array of autodeps to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Set up internal state. If a pointer to an array of clockdomains * @clkdms was supplied, loop through the list of clockdomains, diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 85b3dce6564..5823584d9cd 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -125,7 +125,7 @@ struct clockdomain { }; /** - * struct clkdm_ops - Arch specfic function implementations + * struct clkdm_ops - Arch specific function implementations * @clkdm_add_wkdep: Add a wakeup dependency between clk domains * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains * @clkdm_read_wkdep: Read wakeup dependency state between clk domains diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index a44c5230340..1c240eff391 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -297,8 +297,8 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); /** * omap3_cpuidle_update_states() - Update the cpuidle states - * @mpu_deepest_state: Enable states upto and including this for mpu domain - * @core_deepest_state: Enable states upto and including this for core domain + * @mpu_deepest_state: Enable states up to and including this for mpu domain + * @core_deepest_state: Enable states up to and including this for core domain * * This goes through the list of states available and enables and disables the * validity of C states based on deepest state that can be achieved for the diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 84d1b735fe8..7b855856459 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -253,7 +253,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data ARRAY_SIZE(omap_keyboard_latency), 0); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } @@ -373,7 +373,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) od = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata), omap_mcspi_latency, ARRAY_SIZE(omap_mcspi_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n", name, oh->name); kfree(pdata); return 0; @@ -725,7 +725,7 @@ static int __init omap_init_wdt(void) od = omap_device_build(dev_name, id, oh, NULL, 0, omap_wdt_latency, ARRAY_SIZE(omap_wdt_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n", dev_name, oh->name); return 0; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 34922b2d2e3..c9ff0e79703 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -262,7 +262,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0); kfree(p); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 413de18c1d2..9529842ae05 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -82,7 +82,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) kfree(pdata); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 137e1a5f3d8..b2f30bed5a2 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -465,7 +465,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name); + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); kfree(mmc_data->slots[0].name); goto done; } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 565b9064a32..4a6ef6ab845 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -149,7 +149,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) ARRAY_SIZE(omap2_mcbsp_latency), false); kfree(pdata); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index bb043cbb388..a4ab1e36431 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -518,7 +518,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) seq_printf(s, "/* %s */\n", m->muxnames[mode]); /* - * XXX: Might be revisited to support differences accross + * XXX: Might be revisited to support differences across * same OMAP generation. */ seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def); diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h index adbea0d03e0..9fd93149ebd 100644 --- a/arch/arm/mach-omap2/mux2430.h +++ b/arch/arm/mach-omap2/mux2430.h @@ -22,7 +22,7 @@ * absolute addresses. The name in the macro is the mode-0 name of * the pin. NOTE: These registers are 8-bits wide. * - * Note that these defines use SDMMC instead of MMC for compability + * Note that these defines use SDMMC instead of MMC for compatibility * with signal names used in 3630. */ #define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000 diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index a860fb5024c..e6e3810db77 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1559,7 +1559,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { * I2CHS IP's do not follow the usual pattern. * prcm_reg_id alone cannot be used to program * the iclk and fclk. Needs to be handled using - * additonal flags when clk handling is moved + * additional flags when clk handling is moved * to hwmod framework. */ .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index e2e605fe913..05f6abc96b0 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -112,12 +112,12 @@ int omap4430_phy_power(struct device *dev, int ID, int on) else /* * Enable VBUS Valid, AValid and IDDIG - * high impedence + * high impedance */ __raw_writel(IDDIG | AVALID | VBUSVALID, ctrl_base + USBOTGHS_CONTROL); } else { - /* Enable session END and IDIG to high impedence. */ + /* Enable session END and IDIG to high impedance. */ __raw_writel(SESSEND | IDDIG, ctrl_base + USBOTGHS_CONTROL); } diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 0a8e74e3e81..07d6140baa9 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -308,7 +308,7 @@ int __init omap3_twl_init(void) * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages, * in those scenarios this bit is to be cleared (enable = false). * - * Returns 0 on sucess, error is returned if I2C read/write fails. + * Returns 0 on success, error is returned if I2C read/write fails. */ int __init omap3_twl_set_sr_bit(bool enable) { diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 49c6513e90d..9af08473bf1 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -196,7 +196,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer * @pwrdm_list: array of struct powerdomain pointers to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Loop through the array of powerdomains @pwrdm_list, registering all * that are available on the current CPU. If pwrdm_list is supplied diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 027f40bd235..d23d979b9c3 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -121,7 +121,7 @@ struct powerdomain { }; /** - * struct pwrdm_ops - Arch specfic function implementations + * struct pwrdm_ops - Arch specific function implementations * @pwrdm_set_next_pwrst: Set the target power state for a pd * @pwrdm_read_next_pwrst: Read the target power state set for a pd * @pwrdm_read_pwrst: Read the current power state of a pd diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 9c9c113788b..469a920a74d 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -72,7 +72,7 @@ static struct powerdomain mpu_3xxx_pwrdm = { /* * The USBTLL Save-and-Restore mechanism is broken on - * 3430s upto ES3.0 and 3630ES1.0. Hence this feature + * 3430s up to ES3.0 and 3630ES1.0. Hence this feature * needs to be disabled on these chips. * Refer: 3430 errata ID i459 and 3630 errata ID i579 * diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 8f674c9442b..13e24f913dd 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr) * driver register and sr device intializtion API's. Only one call * will ultimately succeed. * - * Currenly this function registers interrrupt handler for a particular SR + * Currently this function registers interrrupt handler for a particular SR * if smartreflex class driver is already registered and has * requested for interrupts and the SR interrupt line in present. */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index c6facf7becf..6fb520999b6 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -851,7 +851,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm, * @voltdm: pointer to the VDD whose voltage is to be reset. * * This API finds out the correct voltage the voltage domain is supposed - * to be at and resets the voltage to that level. Should be used expecially + * to be at and resets the voltage to that level. Should be used especially * while disabling any voltage compensation modules. */ void omap_voltage_reset(struct voltagedomain *voltdm) @@ -912,7 +912,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, * This API searches only through the non-compensated voltages int the * voltage table. * Returns pointer to the voltage table entry corresponding to volt on - * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage + * success. Returns -ENODATA if no voltage table exisits for the passed voltage * domain or if there is no matching entry. */ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 1a5d6a0e260..5ceafdccc45 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -19,7 +19,7 @@ #include "common.h" /* - * The Orion has fully programable address map. There's a separate address + * The Orion has fully programmable address map. There's a separate address * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB, * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own * address decode windows that allow it to access any of the Orion resources. diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index 429ecafe9fd..a5930f83958 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -190,7 +190,7 @@ err_free_1: * The power front LEDs (blue and red) and SATA red LEDs are controlled via a * single GPIO line and are compatible with the leds-gpio driver. * - * The SATA blue LEDs have some hardware blink capabilities which are detailled + * The SATA blue LEDs have some hardware blink capabilities which are detailed * in the following array: * * SATAx blue LED | SATAx activity | LED state diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index f0f43e13ac8..e6d64494d3d 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -36,7 +36,7 @@ /**************************************************************************** * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * existing QNAP firmware. * * Layout as used by QNAP: diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 92f393f08fa..9eac8192d92 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -56,7 +56,7 @@ /**************************************************************************** * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * existing QNAP firmware. * * Layout as used by QNAP: diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 8554707d20a..edb1dd2d161 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -402,7 +402,7 @@ static void ts78xx_fpga_supports(void) /* enable devices if magic matches */ switch ((ts78xx_fpga.id >> 8) & 0xffffff) { case TS7800_FPGA_MAGIC: - printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n", + pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n", ts78xx_fpga.id & 0xff); ts78xx_fpga.supports.ts_rtc.present = 1; ts78xx_fpga.supports.ts_nand.present = 1; @@ -423,7 +423,7 @@ static int ts78xx_fpga_load_devices(void) if (ts78xx_fpga.supports.ts_rtc.present == 1) { tmp = ts78xx_ts_rtc_load(); if (tmp) { - printk(KERN_INFO "TS-78xx: RTC not registered\n"); + pr_info("TS-78xx: RTC not registered\n"); ts78xx_fpga.supports.ts_rtc.present = 0; } ret |= tmp; @@ -431,7 +431,7 @@ static int ts78xx_fpga_load_devices(void) if (ts78xx_fpga.supports.ts_nand.present == 1) { tmp = ts78xx_ts_nand_load(); if (tmp) { - printk(KERN_INFO "TS-78xx: NAND not registered\n"); + pr_info("TS-78xx: NAND not registered\n"); ts78xx_fpga.supports.ts_nand.present = 0; } ret |= tmp; @@ -439,7 +439,7 @@ static int ts78xx_fpga_load_devices(void) if (ts78xx_fpga.supports.ts_rng.present == 1) { tmp = ts78xx_ts_rng_load(); if (tmp) { - printk(KERN_INFO "TS-78xx: RNG not registered\n"); + pr_info("TS-78xx: RNG not registered\n"); ts78xx_fpga.supports.ts_rng.present = 0; } ret |= tmp; @@ -466,7 +466,7 @@ static int ts78xx_fpga_load(void) { ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE); - printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n", + pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n", (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff); @@ -494,7 +494,7 @@ static int ts78xx_fpga_unload(void) * UrJTAG SVN since r1381 can be used to reprogram the FPGA */ if (ts78xx_fpga.id != fpga_id) { - printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n" + pr_err("TS-78xx FPGA: magic/rev mismatch\n" "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n", (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff, (fpga_id >> 8) & 0xffffff, fpga_id & 0xff); @@ -525,7 +525,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj, int value, ret; if (ts78xx_fpga.state < 0) { - printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n"); + pr_err("TS-78xx FPGA: borked, you must powercycle asap\n"); return -EBUSY; } @@ -534,7 +534,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj, else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) value = 0; else { - printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n"); + pr_err("ts78xx_fpga_store: Invalid value\n"); return -EINVAL; } @@ -616,7 +616,7 @@ static void __init ts78xx_init(void) ret = ts78xx_fpga_load(); ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr); if (ret) - printk(KERN_ERR "sysfs_create_file failed: %d\n", ret); + pr_err("sysfs_create_file failed: %d\n", ret); } MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c index 3499fada73a..4cb069fd9af 100644 --- a/arch/arm/mach-pxa/am200epd.c +++ b/arch/arm/mach-pxa/am200epd.c @@ -128,8 +128,8 @@ static int am200_init_gpio_regs(struct metronomefb_par *par) return 0; err_req_gpio: - while (i > 0) - gpio_free(gpios[i--]); + while (--i >= 0) + gpio_free(gpios[i]); return err; } @@ -194,7 +194,7 @@ static struct notifier_block am200_fb_notif = { }; /* this gets called as part of our init. these steps must be done now so - * that we can use set_pxa_fb_info */ + * that we can use pxa_set_fb_info */ static void __init am200_presetup_fb(void) { int fw; @@ -249,7 +249,7 @@ static void __init am200_presetup_fb(void) /* we divide since we told the LCD controller we're 16bpp */ am200_fb_info.modes->xres /= 2; - set_pxa_fb_info(&am200_fb_info); + pxa_set_fb_info(NULL, &am200_fb_info); } diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index 993d75e6639..fa8bad235d9 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -125,10 +125,7 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par) if (err) { dev_err(&am300_device->dev, "failed requesting " "gpio %d, err=%d\n", i, err); - while (i >= DB0_GPIO_PIN) - gpio_free(i--); - i = ARRAY_SIZE(gpios) - 1; - goto err_req_gpio; + goto err_req_gpio2; } } @@ -159,9 +156,13 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par) return 0; +err_req_gpio2: + while (--i >= DB0_GPIO_PIN) + gpio_free(i); + i = ARRAY_SIZE(gpios); err_req_gpio: - while (i > 0) - gpio_free(gpios[i--]); + while (--i >= 0) + gpio_free(gpios[i]); return err; } diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 38dea05df7f..bfbecec6d05 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -263,7 +263,7 @@ static void __init balloon3_lcd_init(void) } balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power; - set_pxa_fb_info(&balloon3_lcd_screen); + pxa_set_fb_info(NULL, &balloon3_lcd_screen); return; err2: diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index b734d846816..8225e2e58c6 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -379,7 +379,7 @@ __setup("monitor=", cmx2xx_set_display); static void __init cmx2xx_init_display(void) { - set_pxa_fb_info(cmx2xx_display); + pxa_set_fb_info(NULL, cmx2xx_display); } #else static inline void cmx2xx_init_display(void) {} diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 06d0a03f462..b2248e76ec8 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -296,7 +296,7 @@ static struct pxafb_mach_info cm_x300_lcd = { static void __init cm_x300_init_lcd(void) { - set_pxa_fb_info(&cm_x300_lcd); + pxa_set_fb_info(NULL, &cm_x300_lcd); } #else static inline void cm_x300_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index ee797397dc5..44c1b77ece6 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -175,7 +175,7 @@ static struct pxafb_mach_info income_lcd_screen = { static void __init income_lcd_init(void) { - set_pxa_fb_info(&income_lcd_screen); + pxa_set_fb_info(NULL, &income_lcd_screen); } #else static inline void income_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 96b2d9fbfef..3f9be419959 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -105,7 +105,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin) lcd_bl_pin = bl_pin; gpio_request(bl_pin, "lcd backlight"); gpio_direction_output(bl_pin, 0); - set_pxa_fb_info(&sharp_lq43_info); + pxa_set_fb_info(NULL, &sharp_lq43_info); } #endif diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index d4e705caefe..3a5507e3191 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -462,7 +462,6 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = { * USB Device Controller */ static struct pxa2xx_udc_mach_info udc_info __initdata = { - .gpio_vbus = -1, /* no connect GPIO; corgi can't tell connection status */ .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index c4bf08b3eb6..2e0425404de 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -90,7 +90,6 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info) static struct pxa2xx_udc_mach_info pxa_udc_info = { .gpio_pullup = -1, - .gpio_vbus = -1, }; void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) @@ -188,16 +187,12 @@ struct platform_device pxa_device_fb = { .resource = pxafb_resources, }; -void __init set_pxa_fb_info(struct pxafb_mach_info *info) +void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info) { + pxa_device_fb.dev.parent = parent; pxa_register_device(&pxa_device_fb, info); } -void __init set_pxa_fb_parent(struct device *parent_dev) -{ - pxa_device_fb.dev.parent = parent_dev; -} - static struct resource pxa_resource_ffuart[] = { { .start = 0x40100000, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index b411d7cbf5a..f8a6e9d79a3 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -689,7 +689,7 @@ static struct pxafb_mach_info em_x270_lcd = { static void __init em_x270_init_lcd(void) { - set_pxa_fb_info(&em_x270_lcd); + pxa_set_fb_info(NULL, &em_x270_lcd); } #else static inline void em_x270_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index edca0a04329..2e3970fdde0 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -20,6 +20,7 @@ #include <linux/mfd/t7l66xb.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/usb/gpio_vbus.h> #include <video/w100fb.h> @@ -51,12 +52,20 @@ void __init eseries_fixup(struct machine_desc *desc, mi->bank[0].size = (64*1024*1024); } -struct pxa2xx_udc_mach_info e7xx_udc_mach_info = { +struct gpio_vbus_mach_info e7xx_udc_info = { .gpio_vbus = GPIO_E7XX_USB_DISC, .gpio_pullup = GPIO_E7XX_USB_PULLUP, .gpio_pullup_inverted = 1 }; +static struct platform_device e7xx_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &e7xx_udc_info, + }, +}; + struct pxaficp_platform_data e7xx_ficp_platform_data = { .gpio_pwdown = GPIO_E7XX_IR_OFF, .transceiver_cap = IR_SIRMODE | IR_OFF, @@ -165,6 +174,7 @@ static struct platform_device e330_tc6387xb_device = { static struct platform_device *e330_devices[] __initdata = { &e330_tc6387xb_device, + &e7xx_gpio_vbus, }; static void __init e330_init(void) @@ -175,7 +185,6 @@ static void __init e330_init(void) eseries_register_clks(); eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e330_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); } MACHINE_START(E330, "Toshiba e330") @@ -214,6 +223,7 @@ static struct platform_device e350_t7l66xb_device = { static struct platform_device *e350_devices[] __initdata = { &e350_t7l66xb_device, + &e7xx_gpio_vbus, }; static void __init e350_init(void) @@ -224,7 +234,6 @@ static void __init e350_init(void) eseries_register_clks(); eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e350_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); } MACHINE_START(E350, "Toshiba e350") @@ -333,6 +342,7 @@ static struct platform_device e400_t7l66xb_device = { static struct platform_device *e400_devices[] __initdata = { &e400_t7l66xb_device, + &e7xx_gpio_vbus, }; static void __init e400_init(void) @@ -344,9 +354,8 @@ static void __init e400_init(void) /* Fixme - e400 may have a switched clock */ eseries_register_clks(); eseries_get_tmio_gpios(); - set_pxa_fb_info(&e400_pxafb_mach_info); + pxa_set_fb_info(NULL, &e400_pxafb_mach_info); platform_add_devices(ARRAY_AND_SIZE(e400_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); } MACHINE_START(E400, "Toshiba e400") @@ -519,6 +528,7 @@ static struct platform_device e740_t7l66xb_device = { static struct platform_device *e740_devices[] __initdata = { &e740_fb_device, &e740_t7l66xb_device, + &e7xx_gpio_vbus, }; static void __init e740_init(void) @@ -532,7 +542,6 @@ static void __init e740_init(void) "UDCCLK", &pxa25x_device_udc.dev), eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e740_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); } @@ -711,6 +720,7 @@ static struct platform_device e750_tc6393xb_device = { static struct platform_device *e750_devices[] __initdata = { &e750_fb_device, &e750_tc6393xb_device, + &e7xx_gpio_vbus, }; static void __init e750_init(void) @@ -723,7 +733,6 @@ static void __init e750_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e750_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); } @@ -873,12 +882,21 @@ static struct platform_device e800_fb_device = { /* --------------------------- UDC definitions --------------------------- */ -static struct pxa2xx_udc_mach_info e800_udc_mach_info = { +static struct gpio_vbus_mach_info e800_udc_info = { .gpio_vbus = GPIO_E800_USB_DISC, .gpio_pullup = GPIO_E800_USB_PULLUP, .gpio_pullup_inverted = 1 }; +static struct platform_device e800_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &e800_udc_info, + }, +}; + + /* ----------------- e800 tc6393xb parameters ------------------ */ static struct tc6393xb_platform_data e800_tc6393xb_info = { @@ -907,6 +925,7 @@ static struct platform_device e800_tc6393xb_device = { static struct platform_device *e800_devices[] __initdata = { &e800_fb_device, &e800_tc6393xb_device, + &e800_gpio_vbus, }; static void __init e800_init(void) @@ -919,7 +938,6 @@ static void __init e800_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e800_devices)); - pxa_set_udc_info(&e800_udc_mach_info); pxa_set_ac97_info(NULL); } diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 93f05e02431..d88aed8fbe1 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -783,7 +783,7 @@ static void __init a780_init(void) pxa_set_i2c_info(NULL); - set_pxa_fb_info(&ezx_fb_info_1); + pxa_set_fb_info(NULL, &ezx_fb_info_1); pxa_set_keypad_info(&a780_keypad_platform_data); @@ -853,7 +853,7 @@ static void __init e680_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_1); + pxa_set_fb_info(NULL, &ezx_fb_info_1); pxa_set_keypad_info(&e680_keypad_platform_data); @@ -918,7 +918,7 @@ static void __init a1200_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&a1200_keypad_platform_data); @@ -1103,7 +1103,7 @@ static void __init a910_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&a910_keypad_platform_data); @@ -1173,7 +1173,7 @@ static void __init e6_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&e6_keypad_platform_data); @@ -1212,7 +1212,7 @@ static void __init e2_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&e2_keypad_platform_data); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 6fd319ea528..d65e4bde9b9 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -26,6 +26,7 @@ #include <linux/gpio.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/usb/gpio_vbus.h> #include <asm/setup.h> #include <asm/memory.h> @@ -106,14 +107,22 @@ static void __init gumstix_mmc_init(void) #endif #ifdef CONFIG_USB_GADGET_PXA25X -static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = { +static struct gpio_vbus_mach_info gumstix_udc_info = { .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, }; +static struct platform_device gumstix_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &gumstix_udc_info, + }, +}; + static void __init gumstix_udc_init(void) { - pxa_set_udc_info(&gumstix_udc_info); + platform_device_register(&gumstix_gpio_vbus); } #else static void gumstix_udc_init(void) diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index dd40e4a9291..f7fb64f11a7 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -167,7 +167,7 @@ static void __init idp_init(void) platform_device_register(&smc91x_device); //platform_device_register(&mst_audio_device); - set_pxa_fb_info(&sharp_lm8v31); + pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&idp_mci_platform_data); } diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h index 2bbcf70dd93..0d4700a7961 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -44,6 +44,11 @@ #define GPIO_NR_PALMZ72_BT_POWER 17 #define GPIO_NR_PALMZ72_BT_RESET 83 +/* Camera */ +#define GPIO_NR_PALMZ72_CAM_PWDN 56 +#define GPIO_NR_PALMZ72_CAM_RESET 57 +#define GPIO_NR_PALMZ72_CAM_POWER 91 + /** Initial values **/ /* Battery */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index e4fb4668c26..207ecb49a61 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -38,7 +38,7 @@ #define PCMD(x) __REG(0x40F50110 + ((x) << 2)) /* - * Slave Power Managment Unit + * Slave Power Management Unit */ #define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ #define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 160ec83f51a..01a45ac4811 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -154,8 +154,8 @@ struct pxafb_mach_info { void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); void (*smart_update)(struct fb_info *); }; -void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info); -void set_pxa_fb_parent(struct device *parent_dev); + +void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); unsigned long pxafb_get_hsync_time(struct device *dev); extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h index 8835c16bc82..7b0f71ef316 100644 --- a/arch/arm/mach-pxa/include/mach/z2.h +++ b/arch/arm/mach-pxa/include/mach/z2.h @@ -25,8 +25,7 @@ #define GPIO98_ZIPITZ2_LID_BUTTON 98 /* Libertas GSPI8686 WiFi */ -#define GPIO14_ZIPITZ2_WIFI_RESET 14 -#define GPIO15_ZIPITZ2_WIFI_POWER 15 +#define GPIO14_ZIPITZ2_WIFI_POWER 14 #define GPIO24_ZIPITZ2_WIFI_CS 24 #define GPIO36_ZIPITZ2_WIFI_IRQ 36 diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index faa408ab7ad..0641f31a56b 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -64,7 +64,7 @@ /* * CPLD registers: - * Only 4 registers, but spreaded over a 32MB address space. + * Only 4 registers, but spread over a 32MB address space. * Be gentle, and remap that over 32kB... */ diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 87c1ed9ccd2..e5e326d2cdc 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -185,7 +185,7 @@ static struct pxafb_mach_info littleton_lcd_info = { static void littleton_init_lcd(void) { - set_pxa_fb_info(&littleton_lcd_info); + pxa_set_fb_info(NULL, &littleton_lcd_info); } #else static inline void littleton_init_lcd(void) {}; diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 6307f70ae22..f5de541725b 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -480,7 +480,7 @@ static void __init lpd270_init(void) pxa_set_ac97_info(NULL); if (lpd270_lcd_to_use != NULL) - set_pxa_fb_info(lpd270_lcd_to_use); + pxa_set_fb_info(NULL, lpd270_lcd_to_use); pxa_set_ohci_info(&lpd270_ohci_platform_data); } diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 0fea945dd6f..3ede978c83d 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -521,7 +521,7 @@ static void __init lubbock_init(void) clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); pxa_set_udc_info(&udc_info); - set_pxa_fb_info(&sharp_lm8v31); + pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); pxa_set_ficp_info(&lubbock_ficp_platform_data); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 5535991c4a3..a72993dde2b 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -757,7 +757,7 @@ static void __init magician_init(void) gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0); gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0); gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0); - set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info); + pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 29b6e7a94e1..95163baca29 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -592,7 +592,7 @@ static void __init mainstone_init(void) else mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode; - set_pxa_fb_info(&mainstone_pxafb_info); + pxa_set_fb_info(NULL, &mainstone_pxafb_info); mainstone_backlight_register(); pxa_set_mci_info(&mainstone_mci_platform_data); diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 78d98a8607e..23925db8ff7 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -458,7 +458,7 @@ static struct platform_device strataflash = { /* * Suspend/Resume bootstrap management * - * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled, + * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled, * this sequence is as follows : * - disables interrupts * - initialize SDRAM (self refresh RAM into active RAM) @@ -795,7 +795,7 @@ static void __init mioa701_machine_init(void) pxa_set_stuart_info(NULL); mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); bootstrap_init(); - set_pxa_fb_info(&mioa701_pxafb_info); + pxa_set_fb_info(NULL, &mioa701_pxafb_info); pxa_set_mci_info(&mioa701_mci_info); pxa_set_keypad_info(&mioa701_keypad_info); pxa_set_udc_info(&mioa701_udc_info); diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 72adb3ae2b4..325c245c0a0 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -1,8 +1,7 @@ /* * Common code for Palm LD, T5, TX, Z72 * - * Copyright (C) 2010 - * Marek Vasut <marek.vasut@gmail.com> + * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -158,7 +157,7 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl; } - set_pxa_fb_info(&palm27x_lcd_screen); + pxa_set_fb_info(NULL, &palm27x_lcd_screen); } #endif diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index a09a2374697..fb06bd04727 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -507,7 +507,7 @@ static struct pxafb_mach_info palmtc_lcd_screen = { static void __init palmtc_lcd_init(void) { - set_pxa_fb_info(&palmtc_lcd_screen); + pxa_set_fb_info(NULL, &palmtc_lcd_screen); } #else static inline void palmtc_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 3f25014a136..726f5b98dcd 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -136,30 +136,14 @@ static struct platform_device palmte2_pxa_keys = { /****************************************************************************** * Backlight ******************************************************************************/ +static struct gpio palmte_bl_gpios[] = { + { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" }, + { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" }, +}; + static int palmte2_backlight_init(struct device *dev) { - int ret; - - ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER"); - if (ret) - goto err; - ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0); - if (ret) - goto err2; - ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0); - if (ret) - goto err3; - - return 0; -err3: - gpio_free(GPIO_NR_PALMTE2_LCD_POWER); -err2: - gpio_free(GPIO_NR_PALMTE2_BL_POWER); -err: - return ret; + return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios)); } static int palmte2_backlight_notify(struct device *dev, int brightness) @@ -171,8 +155,7 @@ static int palmte2_backlight_notify(struct device *dev, int brightness) static void palmte2_backlight_exit(struct device *dev) { - gpio_free(GPIO_NR_PALMTE2_BL_POWER); - gpio_free(GPIO_NR_PALMTE2_LCD_POWER); + gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios)); } static struct platform_pwm_backlight_data palmte2_backlight_data = { @@ -363,7 +346,7 @@ static void __init palmte2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - set_pxa_fb_info(&palmte2_lcd_screen); + pxa_set_fb_info(NULL, &palmte2_lcd_screen); pxa_set_mci_info(&palmte2_mci_platform_data); palmte2_udc_init(); pxa_set_ac97_info(&palmte2_ac97_pdata); diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 3010193b081..3b8a4f37dbb 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -30,6 +30,7 @@ #include <linux/wm97xx.h> #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -47,6 +48,9 @@ #include <mach/palm27x.h> #include <mach/pm.h> +#include <mach/camera.h> + +#include <media/soc_camera.h> #include "generic.h" #include "devices.h" @@ -103,6 +107,28 @@ static unsigned long palmz72_pin_config[] __initdata = { GPIO22_GPIO, /* LCD border color */ GPIO96_GPIO, /* lcd power */ + /* PXA Camera */ + GPIO81_CIF_DD_0, + GPIO48_CIF_DD_5, + GPIO50_CIF_DD_3, + GPIO51_CIF_DD_2, + GPIO52_CIF_DD_4, + GPIO53_CIF_MCLK, + GPIO54_CIF_PCLK, + GPIO55_CIF_DD_1, + GPIO84_CIF_FV, + GPIO85_CIF_LV, + GPIO93_CIF_DD_6, + GPIO108_CIF_DD_7, + + GPIO56_GPIO, /* OV9640 Powerdown */ + GPIO57_GPIO, /* OV9640 Reset */ + GPIO91_GPIO, /* OV9640 Power */ + + /* I2C */ + GPIO117_GPIO, /* I2C_SCL */ + GPIO118_GPIO, /* I2C_SDA */ + /* Misc. */ GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */ GPIO88_GPIO, /* green led */ @@ -254,6 +280,106 @@ device_initcall(palmz72_pm_init); #endif /****************************************************************************** + * SoC Camera + ******************************************************************************/ +#if defined(CONFIG_SOC_CAMERA_OV9640) || \ + defined(CONFIG_SOC_CAMERA_OV9640_MODULE) +static struct pxacamera_platform_data palmz72_pxacamera_platform_data = { + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 2600, +}; + +/* Board I2C devices. */ +static struct i2c_board_info palmz72_i2c_device[] = { + { + I2C_BOARD_INFO("ov9640", 0x30), + } +}; + +static int palmz72_camera_power(struct device *dev, int power) +{ + gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power); + mdelay(50); + return 0; +} + +static int palmz72_camera_reset(struct device *dev) +{ + gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1); + mdelay(50); + gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0); + mdelay(50); + return 0; +} + +static struct soc_camera_link palmz72_iclink = { + .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */ + .board_info = &palmz72_i2c_device[0], + .i2c_adapter_id = 0, + .module_name = "ov96xx", + .power = &palmz72_camera_power, + .reset = &palmz72_camera_reset, + .flags = SOCAM_DATAWIDTH_8, +}; + +static struct i2c_gpio_platform_data palmz72_i2c_bus_data = { + .sda_pin = 118, + .scl_pin = 117, + .udelay = 10, + .timeout = 100, +}; + +static struct platform_device palmz72_i2c_bus_device = { + .name = "i2c-gpio", + .id = 0, /* we use this as a replacement for i2c-pxa */ + .dev = { + .platform_data = &palmz72_i2c_bus_data, + } +}; + +static struct platform_device palmz72_camera = { + .name = "soc-camera-pdrv", + .id = -1, + .dev = { + .platform_data = &palmz72_iclink, + }, +}; + +/* Here we request the camera GPIOs and configure them. We power up the camera + * module, deassert the reset pin, but put it into powerdown (low to no power + * consumption) mode. This allows us to later bring the module up fast. */ +static struct gpio palmz72_camera_gpios[] = { + { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" }, + { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" }, + { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" }, +}; + +static inline void __init palmz72_cam_gpio_init(void) +{ + int ret; + + ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); + if (!ret) + gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); + else + printk(KERN_ERR "Camera GPIO init failed!\n"); + + return; +} + +static void __init palmz72_camera_init(void) +{ + palmz72_cam_gpio_init(); + pxa_set_camera_info(&palmz72_pxacamera_platform_data); + platform_device_register(&palmz72_i2c_bus_device); + platform_device_register(&palmz72_camera); +} +#else +static inline void palmz72_camera_init(void) {} +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static void __init palmz72_init(void) @@ -276,6 +402,7 @@ static void __init palmz72_init(void) palm27x_pmic_init(); palmz72_kpc_init(); palmz72_leds_init(); + palmz72_camera_init(); } MACHINE_START(PALMZ72, "Palm Zire72") diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 4d012054012..6d5b7e06212 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -515,7 +515,7 @@ void __init pcm990_baseboard_init(void) pcm990_init_irq(); #ifndef CONFIG_PCM990_DISPLAY_NONE - set_pxa_fb_info(&pcm990_fbinfo); + pxa_set_fb_info(NULL, &pcm990_fbinfo); #endif platform_device_register(&pcm990_backlight_device); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 35353af345d..16d14fd79b4 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -445,8 +445,7 @@ static void __init poodle_init(void) if (ret) pr_warning("poodle: Unable to register LoCoMo device\n"); - set_pxa_fb_parent(&poodle_locomo_device.dev); - set_pxa_fb_info(&poodle_fb_info); + pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 47094188e02..cd1861351f7 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -597,7 +597,7 @@ static void __init raumfeld_lcd_init(void) { int ret; - set_pxa_fb_info(&raumfeld_sharp_lcd_info); + pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); /* Earlier devices had the backlight regulator controlled * via PWM, later versions use another controller for that */ diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index eb83c89428e..fee97a93512 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -473,7 +473,7 @@ static struct pxafb_mach_info saar_lcd_info = { static void __init saar_init_lcd(void) { - set_pxa_fb_info(&saar_lcd_info); + pxa_set_fb_info(NULL, &saar_lcd_info); } #else static inline void saar_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 38e2c0912b9..01c576963e9 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -724,7 +724,7 @@ static struct pxafb_mach_info spitz_pxafb_info = { static void __init spitz_lcd_init(void) { - set_pxa_fb_info(&spitz_pxafb_info); + pxa_set_fb_info(NULL, &spitz_pxafb_info); } #else static inline void spitz_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 9cecf8366db..53d4a472b69 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -466,7 +466,7 @@ static void __init tavorevb_init_lcd(void) { platform_device_register(&tavorevb_backlight_devices[0]); platform_device_register(&tavorevb_backlight_devices[1]); - set_pxa_fb_info(&tavorevb_lcd_info); + pxa_set_fb_info(NULL, &tavorevb_lcd_info); } #else static inline void tavorevb_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index e7f64d9b4f2..428da3ff33a 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -100,7 +100,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) static struct clock_event_device ckevt_pxa_osmr0 = { .name = "osmr0", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 200, .set_next_event = pxa_osmr0_set_next_event, .set_mode = pxa_osmr0_set_mode, @@ -135,8 +134,8 @@ static void __init pxa_timer_init(void) init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate); - ckevt_pxa_osmr0.mult = - div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); + clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4); + clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4); ckevt_pxa_osmr0.max_delta_ns = clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); ckevt_pxa_osmr0.min_delta_ns = diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 5ad3807af33..5fa145778e7 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -35,6 +35,7 @@ #include <linux/spi/pxa2xx_spi.h> #include <linux/input/matrix_keypad.h> #include <linux/i2c/pxa-i2c.h> +#include <linux/usb/gpio_vbus.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -240,12 +241,20 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = { /* * USB Device Controller */ -static struct pxa2xx_udc_mach_info udc_info __initdata = { +static struct gpio_vbus_mach_info tosa_udc_info = { .gpio_pullup = TOSA_GPIO_USB_PULLUP, .gpio_vbus = TOSA_GPIO_USB_IN, .gpio_vbus_inverted = 1, }; +static struct platform_device tosa_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &tosa_udc_info, + }, +}; + /* * MMC/SD Device */ @@ -891,6 +900,7 @@ static struct platform_device *devices[] __initdata = { &tosa_bt_device, &sharpsl_rom_device, &wm9712_device, + &tosa_gpio_vbus, }; static void tosa_poweroff(void) @@ -937,7 +947,6 @@ static void __init tosa_init(void) dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); pxa_set_mci_info(&tosa_mci_platform_data); - pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); pxa_set_i2c_info(NULL); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 857bb2e6348..b9cfbebdfe9 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -516,9 +516,9 @@ static void __init trizeps4_init(void) pxa_set_stuart_info(NULL); if (0) /* dont know how to determine LCD */ - set_pxa_fb_info(&sharp_lcd); + pxa_set_fb_info(NULL, &sharp_lcd); else - set_pxa_fb_info(&toshiba_lcd); + pxa_set_fb_info(NULL, &toshiba_lcd); pxa_set_mci_info(&trizeps4_mci_platform_data); #ifndef STATUS_LEDS_ON_STUART_PINS diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index aa70331c080..b523f119e0f 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -932,7 +932,7 @@ static void __init viper_init(void) /* Wake-up serial console */ viper_init_serial_gpio(); - set_pxa_fb_info(&fb_info); + pxa_set_fb_info(NULL, &fb_info); /* v1 hardware cannot use the datacs line */ version = viper_hw_version(); diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index e709fd45926..f71d377c864 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -572,7 +572,7 @@ static void __init vpac270_lcd_init(void) } vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power; - set_pxa_fb_info(&vpac270_lcd_screen); + pxa_set_fb_info(NULL, &vpac270_lcd_screen); return; err2: diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index aaf883754ef..fbe9e02e2f9 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -91,13 +91,13 @@ static unsigned long z2_pin_config[] = { GPIO47_STUART_TXD, /* Keypad */ - GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, - GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, - GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, - GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, - GPIO38_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, - GPIO16_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, - GPIO17_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO34_KP_MKIN_3, + GPIO38_KP_MKIN_4, + GPIO16_KP_MKIN_5, + GPIO17_KP_MKIN_6, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -138,8 +138,7 @@ static unsigned long z2_pin_config[] = { GPIO1_GPIO, /* Power button */ GPIO37_GPIO, /* Headphone detect */ GPIO98_GPIO, /* Lid switch */ - GPIO14_GPIO, /* WiFi Reset */ - GPIO15_GPIO, /* WiFi Power */ + GPIO14_GPIO, /* WiFi Power */ GPIO24_GPIO, /* WiFi CS */ GPIO36_GPIO, /* WiFi IRQ */ GPIO88_GPIO, /* LCD CS */ @@ -204,7 +203,7 @@ static struct platform_pwm_backlight_data z2_backlight_data[] = { /* Keypad Backlight */ .pwm_id = 1, .max_brightness = 1023, - .dft_brightness = 512, + .dft_brightness = 0, .pwm_period_ns = 1260320, }, [1] = { @@ -271,7 +270,7 @@ static struct pxafb_mach_info z2_lcd_screen = { static void __init z2_lcd_init(void) { - set_pxa_fb_info(&z2_lcd_screen); + pxa_set_fb_info(NULL, &z2_lcd_screen); } #else static inline void z2_lcd_init(void) {} @@ -309,12 +308,12 @@ struct gpio_led z2_gpio_leds[] = { .active_low = 1, }, { .name = "z2:green:charged", - .default_trigger = "none", + .default_trigger = "mmc0", .gpio = GPIO85_ZIPITZ2_LED_CHARGED, .active_low = 1, }, { .name = "z2:amber:charging", - .default_trigger = "none", + .default_trigger = "Z2-charging-or-full", .gpio = GPIO83_ZIPITZ2_LED_CHARGING, .active_low = 1, }, @@ -427,8 +426,22 @@ static inline void z2_mkp_init(void) {} ******************************************************************************/ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) static struct gpio_keys_button z2_pxa_buttons[] = { - {KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" }, - {KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" }, + { + .code = KEY_POWER, + .gpio = GPIO1_ZIPITZ2_POWER_BUTTON, + .active_low = 0, + .desc = "Power Button", + .wakeup = 1, + .type = EV_KEY, + }, + { + .code = SW_LID, + .gpio = GPIO98_ZIPITZ2_LID_BUTTON, + .active_low = 1, + .desc = "Lid Switch", + .wakeup = 0, + .type = EV_SW, + }, }; static struct gpio_keys_platform_data z2_pxa_keys_data = { @@ -461,9 +474,9 @@ static struct z2_battery_info batt_chip_info = { .batt_I2C_addr = 0x55, .batt_I2C_reg = 2, .charge_gpio = GPIO0_ZIPITZ2_AC_DETECT, - .min_voltage = 2400000, - .max_voltage = 3700000, - .batt_div = 69, + .min_voltage = 3475000, + .max_voltage = 4190000, + .batt_div = 59, .batt_mult = 1000000, .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION, .batt_name = "Z2", @@ -497,26 +510,16 @@ static int z2_lbs_spi_setup(struct spi_device *spi) { int ret = 0; - ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power"); + ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power"); if (ret) goto err; - ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1); + ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1); if (ret) goto err2; - ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset"); - if (ret) - goto err2; - - ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0); - if (ret) - goto err3; - - /* Reset the card */ + /* Wait until card is powered on */ mdelay(180); - gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1); - mdelay(20); spi->bits_per_word = 16; spi->mode = SPI_MODE_2, @@ -525,22 +528,18 @@ static int z2_lbs_spi_setup(struct spi_device *spi) return 0; -err3: - gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); err2: - gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); + gpio_free(GPIO14_ZIPITZ2_WIFI_POWER); err: return ret; }; static int z2_lbs_spi_teardown(struct spi_device *spi) { - gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0); - gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0); - gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); - gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); - return 0; + gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0); + gpio_free(GPIO14_ZIPITZ2_WIFI_POWER); + return 0; }; static struct pxa2xx_spi_chip z2_lbs_chip_info = { diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 139aa7f2ed9..00363c7ac18 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -847,7 +847,7 @@ static void __init zeus_init(void) if (zeus_setup_fb_gpios()) pr_err("Failed to setup fb gpios\n"); else - set_pxa_fb_info(&zeus_fb_info); + pxa_set_fb_info(NULL, &zeus_fb_info); pxa_set_mci_info(&zeus_mci_platform_data); pxa_set_udc_info(&zeus_udc_info); diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index a4c784aab76..5821185f77a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -208,7 +208,7 @@ static void __init zylonite_init_lcd(void) platform_device_register(&zylonite_backlight_device); if (lcd_id & 0x20) { - set_pxa_fb_info(&zylonite_sharp_lcd_info); + pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info); return; } @@ -220,7 +220,7 @@ static void __init zylonite_init_lcd(void) else zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode; - set_pxa_fb_info(&zylonite_toshiba_lcd_info); + pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info); } #else static inline void zylonite_init_lcd(void) {} diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 2ecc1d94284..10e75faba4c 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -348,7 +348,7 @@ static void __init gic_init_irq(void) #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB /* board GIC, secondary */ - gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE), + gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE), __io_address(REALVIEW_EB_GIC_CPU_BASE)); gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1); #endif diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index cf68136cc66..b2b2a5bb275 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -19,7 +19,7 @@ #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ /* We use `virtual` dma channels to hide the fact we have only a limited - * number of DMA channels, and not of all of them (dependant on the device) + * number of DMA channels, and not of all of them (dependent on the device) * can be attached to any DMA source. We therefore let the DMA core handle * the allocation of hardware channels to clients. */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 7f7c5294796..988a6863e54 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -101,7 +101,7 @@ #define S3C2410_BANKCON_PMC16 (0x03) /* bank configurations for banks 0..7, note banks - * 6 and 7 have differnt configurations depending on + * 6 and 7 have different configurations depending on * the memory type bits */ #define S3C2410_BANKCON_Tacp2 (0x0 << 2) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 66f44440d5d..079dcaa602d 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -252,7 +252,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = { .def_trigger = "", }; -/* This is the blue LED on the device. Originaly used to indicate GPS activity +/* This is the blue LED on the device. Originally used to indicate GPS activity * by flashing. */ static struct s3c24xx_led_platdata n35_blue_led_pdata = { .name = "blue_led", diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index dfedc9c9e00..dd3120df09f 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -155,7 +155,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { * the same timings, however, anything smaller than 1024x768 * will only be displayed in the top left corner of a 1024x768 * XGA output unless you add optional dip switches to the shield. - * Therefore timings for other resolutions have been ommited here. + * Therefore timings for other resolutions have been omitted here. */ [2] = { _LCD_DECLARE( diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index c35585cf8c4..b197171e7d0 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -315,7 +315,7 @@ int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) case S3C2410_DMAOP_FLUSH: return s3c64xx_dma_flush(chan); - /* belive PAUSE/RESUME are no-ops */ + /* believe PAUSE/RESUME are no-ops */ case S3C2410_DMAOP_PAUSE: case S3C2410_DMAOP_RESUME: case S3C2410_DMAOP_STARTED: diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h index 4be4cc9abf7..07aa4d6054f 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h @@ -29,7 +29,7 @@ #define WPALCON_H (0x19c) #define WPALCON_L (0x1a0) -/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but +/* Palette control for WPAL0 and WPAL1 is the same as in S3C64xx, but * different for WPAL2-4 */ /* In WPALCON_L (aka WPALCON) */ diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c index f16946e456e..be25879bb2e 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -40,7 +40,7 @@ void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index 1f4b595534c..a5a1e331f8e 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -18,7 +18,7 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq -/* Practically, GPIO banks upto MP03 are the configurable gpio banks */ +/* Practically, GPIO banks up to MP03 are the configurable gpio banks */ /* GPIO bank sizes */ #define S5PV210_GPIO_A0_NR (8) diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index 746777d56df..3e3ac05bb7b 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -32,10 +32,10 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: - /* GPG1[3:6] special-funtion 3 */ + /* GPG1[3:6] special-function 3 */ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3)); case 4: - /* GPG0[3:6] special-funtion 2 */ + /* GPG0[3:6] special-function 2 */ s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2)); default: break; diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c index c32e202731c..a83b6c909f6 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -38,7 +38,7 @@ void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index e697691eed2..41252d22e65 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -50,7 +50,7 @@ led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o # LEDs support obj-$(CONFIG_LEDS) += $(led-y) -# Miscelaneous functions +# Miscellaneous functions obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_SA1100_SSP) += ssp.o diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 07d4e8ba371..aaa8acf76b7 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -68,7 +68,7 @@ * clock change in ROM and jump to that code from the kernel. The main * disadvantage is that the ROM has to be modified, which is not * possible on all SA-1100 platforms. Another disadvantage is that - * jumping to ROM makes clock switching unecessary complicated. + * jumping to ROM makes clock switching unnecessary complicated. * * The idea behind this driver is that the memory configuration can be * changed while running from DRAM (even with interrupts turned on!) diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h index 4f7ea012e1e..bae8296f5db 100644 --- a/arch/arm/mach-sa1100/include/mach/SA-1100.h +++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h @@ -1794,7 +1794,7 @@ (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR))) -#define DCSR_RUN 0x00000001 /* DMA RUNing */ +#define DCSR_RUN 0x00000001 /* DMA running */ #define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ #define DCSR_ERROR 0x00000004 /* DMA ERROR */ #define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 9d490c66891..f50b00bd18a 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -29,7 +29,7 @@ static unsigned long jornada_ssp_flags; /** * jornada_ssp_reverse - reverses input byte * - * we need to reverse all data we recieve from the mcu due to its physical location + * we need to reverse all data we receive from the mcu due to its physical location * returns : 01110111 -> 11101110 */ u8 inline jornada_ssp_reverse(u8 byte) @@ -179,7 +179,7 @@ static int __devinit jornada_ssp_probe(struct platform_device *dev) static int jornada_ssp_remove(struct platform_device *dev) { - /* Note that this doesnt actually remove the driver, since theres nothing to remove + /* Note that this doesn't actually remove the driver, since theres nothing to remove * It just makes sure everything is turned off */ GPSR = GPIO_GPIO25; ssp_exit(); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 783b66fa95f..1e35fa976d6 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -947,7 +947,7 @@ static struct platform_device *ap4evb_devices[] __initdata = { &ap4evb_camera, }; -static int __init hdmi_init_pm_clock(void) +static void __init hdmi_init_pm_clock(void) { struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); int ret; @@ -988,20 +988,15 @@ static int __init hdmi_init_pm_clock(void) pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) { + if (ret < 0) pr_err("Cannot set HDMI parent: %d\n", ret); - goto out; - } out: if (!IS_ERR(hdmi_ick)) clk_put(hdmi_ick); - return ret; } -device_initcall(hdmi_init_pm_clock); - -static int __init fsi_init_pm_clock(void) +static void __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; @@ -1010,7 +1005,7 @@ static int __init fsi_init_pm_clock(void) if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); pr_err("Cannot get FSI ICK: %d\n", ret); - return ret; + return; } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); @@ -1018,10 +1013,7 @@ static int __init fsi_init_pm_clock(void) pr_err("Cannot set FSI-A parent: %d\n", ret); clk_put(fsia_ick); - - return ret; } -device_initcall(fsi_init_pm_clock); /* * FIXME !! @@ -1348,6 +1340,9 @@ static void __init ap4evb_init(void) __raw_writel(srcr4 & ~(1 << 13), SRCR4); platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); + + hdmi_init_pm_clock(); + fsi_init_pm_clock(); } static void __init ap4evb_timer_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 8184d4d4f23..7da2ca24229 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -423,7 +423,7 @@ static struct platform_device fsi_hdmi_device = { .name = "sh_fsi2_b_hdmi", }; -static int __init hdmi_init_pm_clock(void) +static void __init hdmi_init_pm_clock(void) { struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); int ret; @@ -467,17 +467,13 @@ static int __init hdmi_init_pm_clock(void) pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) { + if (ret < 0) pr_err("Cannot set HDMI parent: %d\n", ret); - goto out; - } out: if (!IS_ERR(hdmi_ick)) clk_put(hdmi_ick); - return ret; } -device_initcall(hdmi_init_pm_clock); /* USB1 (Host) */ static void usb1_host_port_power(int port, int power) @@ -1218,6 +1214,8 @@ static void __init mackerel_init(void) sh7372_add_standard_devices(); platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); + + hdmi_init_pm_clock(); } static void __init mackerel_timer_init(void) diff --git a/arch/arm/mach-shmobile/include/mach/mmc.h b/arch/arm/mach-shmobile/include/mach/mmc.h index e11560a525a..21a59db638b 100644 --- a/arch/arm/mach-shmobile/include/mach/mmc.h +++ b/arch/arm/mach-shmobile/include/mach/mmc.h @@ -9,7 +9,7 @@ #ifdef CONFIG_MACH_AP4EVB #include "mach/mmc-ap4eb.h" -#elif CONFIG_MACH_MACKEREL +#elif defined(CONFIG_MACH_MACKEREL) #include "mach/mmc-mackerel.h" #else #error "unsupported board." diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h index 6d6a205bcf9..9320aff0a20 100644 --- a/arch/arm/mach-shmobile/include/mach/zboot.h +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -13,7 +13,7 @@ #ifdef CONFIG_MACH_AP4EVB #define MACH_TYPE MACH_TYPE_AP4EVB #include "mach/head-ap4evb.txt" -#elif CONFIG_MACH_MACKEREL +#elif defined(CONFIG_MACH_MACKEREL) #define MACH_TYPE MACH_TYPE_MACKEREL #include "mach/head-mackerel.txt" #else diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index e945ae28ee7..f4ef5eb317b 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -223,7 +223,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, * - Change the source selector to invalid to stop the DMA from * FIFO to memory. * - Read the status register to know the number of pending - * bytes to be transfered. + * bytes to be transferred. * - Finally stop or program the DMA to the next buffer in the * list. */ @@ -244,7 +244,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, if (status & STA_BUSY) req->bytes_transferred -= to_transfer; - /* In continous transfer mode, DMA only tracks the count of the + /* In continuous transfer mode, DMA only tracks the count of the * half DMA buffer. So, if the DMA already finished half the DMA * then add the half buffer to the completed count. * diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index 39011bd9a92..d0132e8031a 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -92,11 +92,11 @@ struct tegra_dma_req { /* This is a called from the DMA ISR context when the DMA is still in * progress and is actively filling same buffer. * - * In case of continous mode receive, this threshold is 1/2 the buffer + * In case of continuous mode receive, this threshold is 1/2 the buffer * size. In other cases, this will not even be called as there is no * hardware support for it. * - * In the case of continous mode receive, if there is next req already + * In the case of continuous mode receive, if there is next req already * queued, DMA programs the HW to use that req when this req is * completed. If there is no "next req" queued, then DMA ISR doesn't do * anything before calling this callback. diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index fabcc49abe8..5535dd0a78c 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -263,7 +263,7 @@ static void disable_i2s0_vcxo(void) val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ + /* Deactivate VCXO if no one else is using VCXO */ if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); @@ -283,7 +283,7 @@ static void disable_i2s1_vcxo(void) val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ + /* Deactivate VCXO if no one else is using VCXO */ if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); @@ -649,7 +649,7 @@ static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) */ long clk_round_rate(struct clk *clk, unsigned long rate) { - /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */ + /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */ /* Else default to fixed value */ if (clk->round_rate) { diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index dc8746d7826..af913741e6e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -52,7 +52,7 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { * on value present in GpioSel1 to GpioSel6 and AlternatFunction * register. This is the array of 7 configuration settings. * One has to compile time decide these settings. Below is the - * explaination of these setting + * explanation of these setting * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 0fefb34c11e..16647b25537 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -58,7 +58,7 @@ #define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) #define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) -/* per7 base addressess */ +/* per7 base addresses */ #define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000) #define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000) #define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000) @@ -68,7 +68,7 @@ #define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) #define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) -/* per6 base addressess */ +/* per6 base addresses */ #define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) #define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) #define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) @@ -79,11 +79,11 @@ #define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) -/* per5 base addressess */ +/* per5 base addresses */ #define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) #define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) -/* per4 base addressess */ +/* per4 base addresses */ #define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) #define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) #define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) @@ -106,7 +106,7 @@ #define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) #define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) -/* per2 base addressess */ +/* per2 base addresses */ #define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) #define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) #define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 96e59e3ee4f..eb7ffa0ee8b 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -314,7 +314,7 @@ static struct mmci_platform_data mmc0_plat_data = { .gpio_cd = -1, }; -static struct resource chalcd_resources[] = { +static struct resource char_lcd_resources[] = { { .start = VERSATILE_CHAR_LCD_BASE, .end = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1), diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index d3644db467b..f40c69656d8 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -32,7 +32,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. * * Size Clean (ticks) Dirty (ticks) * 4096 21 20 21 53 55 54 diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index 49c2b66cf3d..a7b276dbda1 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -34,7 +34,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. * * *** This needs benchmarking */ diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 6136e68ce95..dc18d81ef8c 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -96,7 +96,7 @@ ENDPROC(v7_flush_dcache_all) * Flush the entire cache system. * The data cache flush is now achieved using atomic clean / invalidates * working outwards from L1 cache. This is done using Set/Way based cache - * maintainance instructions. + * maintenance instructions. * The instruction cache can still be invalidated back to the point of * unification in a single instruction. * diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 226e3d8351c..6c4e7fd6c8a 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -64,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 86d9c2cf0bc..4ce947c1962 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -64,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 83d3dd34f84..c8884c5413a 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 686043ee728..413684660aa 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 665266da143..7a06e5964f5 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -63,7 +63,7 @@ ENTRY(cpu_arm720_proc_fin) /* * Function: arm720_proc_do_idle(void) * Params : r0 = unused - * Purpose : put the processer in proper idle mode + * Purpose : put the processor in proper idle mode */ ENTRY(cpu_arm720_do_idle) mov pc, lr diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 219980ec8b6..b46eb21f05c 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 65536 diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 36154b1e792..95ba1fc56e4 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -54,7 +54,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. (I think this should + * cache line maintenance instructions. (I think this should * be 32768). */ #define CACHE_DLIMIT 8192 diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 89c5e0009c4..541e4774eea 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -77,7 +77,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 8192 diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index e32fa499194..34261f9486b 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -85,7 +85,7 @@ /* * Sanity check the PTE configuration for the code below - which makes - * certain assumptions about how these bits are layed out. + * certain assumptions about how these bits are laid out. */ #ifdef CONFIG_MMU #if L_PTE_SHARED != PTE_EXT_SHARED diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 832b6bdc192..bfa0c9f611c 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -132,7 +132,7 @@ ENTRY(cpu_v6_do_suspend) mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0 mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mrc p15, 0, r9, c1, c0, 1 @ auxillary control register + mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register mrc p15, 0, r10, c1, c0, 2 @ co-processor access control mrc p15, 0, r11, c1, c0, 0 @ control register stmia r0, {r4 - r11} @@ -151,7 +151,7 @@ ENTRY(cpu_v6_do_resume) mcr p15, 0, r6, c3, c0, 0 @ Domain ID mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0 mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mcr p15, 0, r9, c1, c0, 1 @ auxillary control register + mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register mcr p15, 0, r10, c1, c0, 2 @ co-processor access control mcr p15, 0, ip, c2, c0, 2 @ TTB control register mcr p15, 0, ip, c7, c5, 4 @ ISB diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 262fa88a743..c35618e42f6 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -237,7 +237,7 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index ce81481becf..4268a2bdf14 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -13,7 +13,7 @@ /* * A driver for the Freescale Semiconductor i.MXC CPUfreq module. - * The CPUFREQ driver is for controling CPU frequency. It allows you to change + * The CPUFREQ driver is for controlling CPU frequency. It allows you to change * the CPU clock speed on the fly. */ diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index 6561c9df5f0..ccc789e21da 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -53,7 +53,7 @@ struct platform_device *__init imx_add_fec( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_4K, + .end = data->iobase + SZ_4K - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c index 10653cc8d1f..805336fdc25 100644 --- a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c +++ b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c @@ -27,7 +27,7 @@ struct platform_device *__init imx_add_imxdi_rtc( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_16K, + .end = data->iobase + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h index 5cd6466964a..6fda788ed0e 100644 --- a/arch/arm/plat-mxc/include/mach/audmux.h +++ b/arch/arm/plat-mxc/include/mach/audmux.h @@ -15,6 +15,14 @@ #define MX31_AUDMUX_PORT5_SSI_PINS_5 4 #define MX31_AUDMUX_PORT6_SSI_PINS_6 5 +#define MX51_AUDMUX_PORT1_SSI0 0 +#define MX51_AUDMUX_PORT2_SSI1 1 +#define MX51_AUDMUX_PORT3 2 +#define MX51_AUDMUX_PORT4 3 +#define MX51_AUDMUX_PORT5 4 +#define MX51_AUDMUX_PORT6 5 +#define MX51_AUDMUX_PORT7 6 + /* Register definitions for the i.MX21/27 Digital Audio Multiplexer */ #define MXC_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff) #define MXC_AUDMUX_V1_PCR_INMEN (1 << 8) @@ -28,7 +36,7 @@ #define MXC_AUDMUX_V1_PCR_TCLKDIR (1 << 30) #define MXC_AUDMUX_V1_PCR_TFSDIR (1 << 31) -/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */ +/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */ #define MXC_AUDMUX_V2_PTCR_TFSDIR (1 << 31) #define MXC_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27) #define MXC_AUDMUX_V2_PTCR_TCLKDIR (1 << 26) diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index bd9bb979914..2e49e71b1b9 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -33,9 +33,9 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - @ this macro checks which interrupt occured + @ this macro checks which interrupt occurred @ and returns its number in irqnr - @ and returns if an interrupt occured in irqstat + @ and returns if an interrupt occurred in irqstat .macro get_irqnr_and_base, irqnr, irqstat, base, tmp #ifndef CONFIG_MXC_TZIC @ Load offset & priority of the highest priority diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h index c4f116d214f..7a9b20abda0 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h @@ -90,12 +90,12 @@ #define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) #define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) #define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19) -#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20) -#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21) -#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22) -#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23) -#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24) +#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) +#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) +#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) +#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) +#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 23) +#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) #define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) #define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) #define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h index aaec2a6e7b3..5f2da75a47f 100644 --- a/arch/arm/plat-mxc/include/mach/mx50.h +++ b/arch/arm/plat-mxc/include/mach/mx50.h @@ -282,4 +282,8 @@ #define MX50_INT_APBHDMA_CHAN6 116 #define MX50_INT_APBHDMA_CHAN7 117 +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) +extern int mx50_revision(void); +#endif + #endif /* ifndef __MACH_MX50_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 1eb339e6c85..dede19a766f 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -347,6 +347,7 @@ #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) extern int mx51_revision(void); +extern void mx51_display_revision(void); #endif /* tape-out 1 defines */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 7e072637eef..1aea818d9d3 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -51,6 +51,20 @@ #define IMX_CHIP_REVISION_3_3 0x33 #define IMX_CHIP_REVISION_UNKNOWN 0xff +#define IMX_CHIP_REVISION_1_0_STRING "1.0" +#define IMX_CHIP_REVISION_1_1_STRING "1.1" +#define IMX_CHIP_REVISION_1_2_STRING "1.2" +#define IMX_CHIP_REVISION_1_3_STRING "1.3" +#define IMX_CHIP_REVISION_2_0_STRING "2.0" +#define IMX_CHIP_REVISION_2_1_STRING "2.1" +#define IMX_CHIP_REVISION_2_2_STRING "2.2" +#define IMX_CHIP_REVISION_2_3_STRING "2.3" +#define IMX_CHIP_REVISION_3_0_STRING "3.0" +#define IMX_CHIP_REVISION_3_1_STRING "3.1" +#define IMX_CHIP_REVISION_3_2_STRING "3.2" +#define IMX_CHIP_REVISION_3_3_STRING "3.3" +#define IMX_CHIP_REVISION_UNKNOWN_STRING "unknown" + #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; #endif @@ -181,6 +195,15 @@ struct cpu_op { u32 cpu_rate; }; +int tzic_enable_wake(int is_idle); +enum mxc_cpu_pwr_mode { + WAIT_CLOCKED, /* wfi only */ + WAIT_UNCLOCKED, /* WAIT */ + WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */ + STOP_POWER_ON, /* just STOP */ + STOP_POWER_OFF, /* STOP + SRPG */ +}; + extern struct cpu_op *(*get_cpu_op)(int *op); #endif diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h index 04c0d060d81..6bb96ef1600 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -24,7 +24,7 @@ struct mxc_nand_platform_data { unsigned int width; /* data bus width in bytes */ - unsigned int hw_ecc:1; /* 0 if supress hardware ECC */ + unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */ unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ struct mtd_partition *parts; /* partition table */ int nr_parts; /* size of parts */ diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index 95be51bfe9a..0417da9f710 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -20,6 +20,8 @@ #include <mach/hardware.h> #include <mach/common.h> +extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); + static inline void arch_idle(void) { #ifdef CONFIG_ARCH_MXC91231 @@ -54,7 +56,9 @@ static inline void arch_idle(void) "orr %0, %0, #0x00000004\n" "mcr p15, 0, %0, c1, c0, 0\n" : "=r" (reg)); - } else + } else if (cpu_is_mx51()) + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + else cpu_do_idle(); } diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 9f0c2610595..2237ff8b434 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -27,6 +27,7 @@ #include <linux/clk.h> #include <mach/hardware.h> +#include <asm/sched_clock.h> #include <asm/mach/time.h> #include <mach/common.h> @@ -105,6 +106,11 @@ static void gpt_irq_acknowledge(void) __raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT); } +static cycle_t dummy_get_cycles(struct clocksource *cs) +{ + return 0; +} + static cycle_t mx1_2_get_cycles(struct clocksource *cs) { return __raw_readl(timer_base + MX1_2_TCN); @@ -118,18 +124,35 @@ static cycle_t v2_get_cycles(struct clocksource *cs) static struct clocksource clocksource_mxc = { .name = "mxc_timer1", .rating = 200, - .read = mx1_2_get_cycles, + .read = dummy_get_cycles, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static DEFINE_CLOCK_DATA(cd); +unsigned long long notrace sched_clock(void) +{ + cycle_t cyc = clocksource_mxc.read(&clocksource_mxc); + + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +static void notrace mxc_update_sched_clock(void) +{ + cycle_t cyc = clocksource_mxc.read(&clocksource_mxc); + update_sched_clock(&cd, cyc, (u32)~0); +} + static int __init mxc_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); if (timer_is_v2()) clocksource_mxc.read = v2_get_cycles; + else + clocksource_mxc.read = mx1_2_get_cycles; + init_sched_clock(&cd, mxc_update_sched_clock, 32, c); clocksource_register_hz(&clocksource_mxc, c); return 0; diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 7d9f815cede..ea28f98d5d6 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -280,7 +280,7 @@ EXPORT_SYMBOL(omap_dsp_get_mempool_base); * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 2ec3b5d9f21..c22217c2ee5 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1019,7 +1019,7 @@ EXPORT_SYMBOL(omap_set_dma_callback); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CSSA_L register overflow inbetween the two reads resulting + * is a chance for CSSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_src_pos(int lch) @@ -1046,7 +1046,7 @@ EXPORT_SYMBOL(omap_get_dma_src_pos); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CDSA_L register overflow inbetween the two reads resulting + * is a chance for CDSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_dst_pos(int lch) diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index d6f9fa0f62a..cac2e8ac696 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -93,7 +93,7 @@ extern void omap_gpio_restore_context(void); /* Wrappers for "new style" GPIO calls, using the new infrastructure * which lets us plug in FPGA, I2C, and other implementations. * * - * The original OMAP-specfic calls should eventually be removed. + * The original OMAP-specific calls should eventually be removed. */ #include <linux/errno.h> diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 12b31616503..1527929b445 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -90,7 +90,7 @@ enum omap_ecc { /* 1-bit ecc: stored at end of spare area */ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at begining of spare area as romcode */ + /* 1-bit ecc: stored at beginning of spare area as romcode */ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ }; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index d598d9fd65a..5587acf0eb2 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1103,7 +1103,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf) /* resend */ return -1; } else { - /* wait for recieve confirmation */ + /* wait for receive confirmation */ int attemps = 0; while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) { if (attemps++ > 1000) { diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 75f65647124..89e68e07b0a 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -434,7 +434,7 @@ typedef unsigned long mfp_cfg_t; * * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which * represents a range of MFP pins from "start" to "end", with the offset - * begining at "offset", to define a single pin, let "end" = -1. + * beginning at "offset", to define a single pin, let "end" = -1. * * use * diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index c2064c30871..0291bd6e236 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o -# Architecture dependant builds +# Architecture dependent builds obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index eea75ff81d1..b3d3d027899 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -455,7 +455,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy) /* whilst we will be called later on, we try and re-set the * cpu frequencies as soon as possible so that we do not end - * up resuming devices and then immediatley having to re-set + * up resuming devices and then immediately having to re-set * a number of settings once these devices have restarted. * * as a note, it is expected devices are not used until they diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 6ad274e7593..27ea852e337 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -557,7 +557,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) break; case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* I belive in this case we do not have anything to do + /* I believe in this case we do not have anything to do * until the next buffer comes along, and we turn off the * reload */ return; diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 46dd078147d..cd6d67c8382 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -208,7 +208,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) } /* - * chained GPIO irq has been sucessfully registered, allocate new gpio + * chained GPIO irq has been successfully registered, allocate new gpio * int group and assign irq nubmers */ diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 9a82b887491..983c578b827 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -21,7 +21,7 @@ struct clk; * @set_parent: set the clock's parent, see clk_set_parent(). * * Group the common clock implementations together so that we - * don't have to keep setting the same fiels again. We leave + * don't have to keep setting the same fields again. We leave * enable in struct clk. * * Adding an extra layer of indirection into the process should diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 5603db0b79b..3ad8386599c 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -114,7 +114,7 @@ extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, * of control per GPIO, generally in the form of: * 0000 = Input * 0001 = Output - * others = Special functions (dependant on bank) + * others = Special functions (dependent on bank) * * Note, since the code to deal with the case where there are two control * registers instead of one, we do not have a separate set of functions for diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 5e04fa6eda7..1762dcb4cb9 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -125,7 +125,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * * These values control the state of the weak pull-{up,down} resistors * available on most pins on the S3C series. Not all chips support both - * up or down settings, and it may be dependant on the chip that is being + * up or down settings, and it may be dependent on the chip that is being * used to whether the particular mode is available. */ #define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) @@ -138,7 +138,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * @pull: The configuration for the pull resistor. * * This function sets the state of the pull-{up,down} resistor for the - * specified pin. It will return 0 if successfull, or a negative error + * specified pin. It will return 0 if successful, or a negative error * code if the pin cannot support the requested pull setting. * * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. @@ -202,7 +202,7 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); * @drvstr: The new value of the driver strength * * This function sets the driver strength value for the specified pin. - * It will return 0 if successfull, or a negative error code if the pin + * It will return 0 if successful, or a negative error code if the pin * cannot support the requested setting. */ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index dac35d0a711..8cad4cf19c3 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -108,7 +108,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * of control per GPIO, generally in the form of: * 0000 = Input * 0001 = Output - * others = Special functions (dependant on bank) + * others = Special functions (dependent on bank) * * Note, since the code to deal with the case where there are two control * registers instead of one, we do not have a separate set of function diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index b0bdf16549d..058e09654fe 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -57,7 +57,7 @@ enum clk_types { * @cfg_gpio: Configure the GPIO for a specific card bit-width * @cfg_card: Configure the interface for a specific card and speed. This * is necessary the controllers and/or GPIO blocks require the - * changing of driver-strength and other controls dependant on + * changing of driver-strength and other controls dependent on * the card and speed of operation. * * Initialisation data specific to either the machine or the platform @@ -108,7 +108,7 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; -/* Helper function availablity */ +/* Helper function availability */ extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w); diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c index b4ff8d74ac4..f85638c6f5a 100644 --- a/arch/arm/plat-samsung/s3c-pl330.c +++ b/arch/arm/plat-samsung/s3c-pl330.c @@ -68,7 +68,7 @@ struct s3c_pl330_xfer { * @req: Two requests to communicate with the PL330 engine. * @callback_fn: Callback function to the client. * @rqcfg: Channel configuration for the xfers. - * @xfer_head: Pointer to the xfer to be next excecuted. + * @xfer_head: Pointer to the xfer to be next executed. * @dmac: Pointer to the DMAC that manages this channel, NULL if the * channel is available to be acquired. * @client: Client of this channel. NULL if the diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h index 2ae6606930a..fcc0d0ad4a1 100644 --- a/arch/arm/plat-spear/include/plat/clock.h +++ b/arch/arm/plat-spear/include/plat/clock.h @@ -89,7 +89,7 @@ struct rate_config { * @sibling: node for list of clocks having same parents * @private_data: clock specific private data * @node: list to maintain clocks linearly - * @cl: clocklook up assoicated with this clock + * @cl: clocklook up associated with this clock * @dent: object for debugfs */ struct clk { |