diff options
Diffstat (limited to 'arch/arm')
47 files changed, 338 insertions, 94 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1f254bd6c93..98922f7d2d1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -955,7 +955,8 @@ config XSCALE_PMU default y config CPU_HAS_PMU - depends on CPU_V6 || CPU_V7 || XSCALE_PMU + depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \ + (!ARCH_OMAP3 || OMAP3_EMU) default y bool diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index a52a27c1d9b..6f80665f477 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -951,8 +951,6 @@ static int sa1111_resume(struct platform_device *dev) if (!save) return 0; - spin_lock_irqsave(&sachip->lock, flags); - /* * Ensure that the SA1111 is still here. * FIXME: shouldn't do this here. @@ -969,6 +967,13 @@ static int sa1111_resume(struct platform_device *dev) * First of all, wake up the chip. */ sa1111_wake(sachip); + + /* + * Only lock for write ops. Also, sa1111_wake must be called with + * released spinlock! + */ + spin_lock_irqsave(&sachip->lock, flags); + sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0); sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1); diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h index f3eabf1ecec..833306ee9e7 100644 --- a/arch/arm/include/asm/mach/udc_pxa2xx.h +++ b/arch/arm/include/asm/mach/udc_pxa2xx.h @@ -21,8 +21,8 @@ struct pxa2xx_udc_mach_info { * here. Note that sometimes the signals go through inverters... */ bool gpio_vbus_inverted; - u16 gpio_vbus; /* high == vbus present */ + int gpio_vbus; /* high == vbus present */ bool gpio_pullup_inverted; - u16 gpio_pullup; /* high == pullup activated */ + int gpio_pullup; /* high == pullup activated */ }; diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 6a89567ffc5..7bed3daf83b 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -91,7 +91,11 @@ extern void release_thread(struct task_struct *); unsigned long get_wchan(struct task_struct *p); +#if __LINUX_ARM_ARCH__ == 6 +#define cpu_relax() smp_mb() +#else #define cpu_relax() barrier() +#endif /* * Create a new kernel thread diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index c45768614c8..de12536d687 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -201,7 +201,7 @@ armpmu_event_update(struct perf_event *event, { int shift = 64 - 32; s64 prev_raw_count, new_raw_count; - s64 delta; + u64 delta; again: prev_raw_count = atomic64_read(&hwc->prev_count); diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index d029d1f5f9e..02cae5e2951 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -17,6 +17,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/interrupt.h> +#include <linux/completion.h> #include <mach/dma.h> #define MSM_DMOV_CHANNEL_COUNT 16 diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index d3d5877c750..b2c7f512070 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -115,6 +115,8 @@ static struct platform_device physmap_flash_device = { /* USB */ +#if defined(CONFIG_USB_ULPI) + #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -244,10 +246,20 @@ static struct mxc_usbh_platform_data usbh2_pdata = { .flags = MXC_EHCI_POWER_PINS_ENABLED, }; -static struct platform_device *devices[] __initdata = { - &smsc91x_device, - &physmap_flash_device, -}; +static void lilly1131_usb_init(void) +{ + usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_usbh1, &usbh1_pdata); + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +} + +#else +static inline void lilly1131_usb_init(void) {} +#endif /* CONFIG_USB_ULPI */ /* SPI */ @@ -279,6 +291,11 @@ static struct spi_board_info mc13783_dev __initdata = { .platform_data = &mc13783_pdata, }; +static struct platform_device *devices[] __initdata = { + &smsc91x_device, + &physmap_flash_device, +}; + static int mx31lilly_baseboard; core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); @@ -321,13 +338,7 @@ static void __init mx31lilly_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); /* USB */ - usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); - - mxc_register_device(&mxc_usbh1, &usbh1_pdata); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + lilly1131_usb_init(); } static void __init mx31lilly_timer_init(void) diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c index 2c471fc451d..f035f418527 100644 --- a/arch/arm/mach-nomadik/clock.c +++ b/arch/arm/mach-nomadik/clock.c @@ -32,7 +32,10 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); -/* We have a fixed clock alone, for now */ +static struct clk clk_24 = { + .rate = 2400000, +}; + static struct clk clk_48 = { .rate = 48 * 1000 * 1000, }; @@ -50,6 +53,8 @@ static struct clk clk_default; } static struct clk_lookup lookups[] = { + CLK(&clk_24, "mtu0"), + CLK(&clk_24, "mtu1"), CLK(&clk_48, "uart0"), CLK(&clk_48, "uart1"), CLK(&clk_default, "gpio.0"), @@ -59,10 +64,8 @@ static struct clk_lookup lookups[] = { CLK(&clk_default, "rng"), }; -static int __init clk_init(void) +int __init clk_init(void) { clkdev_add_table(lookups, ARRAY_SIZE(lookups)); return 0; } - -arch_initcall(clk_init); diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h index 5563985a2cc..78da2e7c398 100644 --- a/arch/arm/mach-nomadik/clock.h +++ b/arch/arm/mach-nomadik/clock.h @@ -11,3 +11,5 @@ struct clk { unsigned long rate; }; + +int __init clk_init(void); diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 91c3c901b46..ac58e3b03b1 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -31,6 +31,8 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> +#include "clock.h" + #define __MEM_4K_RESOURCE(x) \ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} @@ -143,6 +145,12 @@ void __init cpu8815_init_irq(void) /* This modified VIC cell has two register blocks, at 0 and 0x20 */ vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0); vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0); + + /* + * Init clocks here so that they are available for system timer + * initialization. + */ + clk_init(); } /* diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index f848ba8dbc1..a04cffd691c 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -538,9 +538,7 @@ static void ads7846_dev_init(void) printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); gpio_direction_input(OMAP3_STALKER_TS_GPIO); - - omap_set_gpio_debounce(OMAP3_STALKER_TS_GPIO, 1); - omap_set_gpio_debounce_time(OMAP3_STALKER_TS_GPIO, 0xa); + gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 02804224517..e10db7a90cb 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -1369,6 +1369,7 @@ static struct clk emif1_ick = { .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .flags = ENABLE_ON_INIT, .clkdm_name = "l3_emif_clkdm", .parent = &ddrphy_ck, .recalc = &followparent_recalc, @@ -1379,6 +1380,7 @@ static struct clk emif2_ick = { .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .flags = ENABLE_ON_INIT, .clkdm_name = "l3_emif_clkdm", .parent = &ddrphy_ck, .recalc = &followparent_recalc, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 95c9a5f774e..b7a4133267d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -409,10 +409,11 @@ static int _init_main_clk(struct omap_hwmod *oh) return 0; oh->_clk = omap_clk_get_by_name(oh->main_clk); - if (!oh->_clk) + if (!oh->_clk) { pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n", oh->name, oh->main_clk); return -EINVAL; + } if (!oh->_clk->clkdm) pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n", @@ -444,10 +445,11 @@ static int _init_interface_clks(struct omap_hwmod *oh) continue; c = omap_clk_get_by_name(os->clk); - if (!c) + if (!c) { pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n", oh->name, os->clk); ret = -EINVAL; + } os->_clk = c; } @@ -470,10 +472,11 @@ static int _init_opt_clks(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) { c = omap_clk_get_by_name(oc->clk); - if (!c) + if (!c) { pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n", oh->name, oc->clk); ret = -EINVAL; + } oc->_clk = c; } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2e967716cc3..b88737fd6cf 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -99,7 +99,7 @@ static void omap3_enable_io_chain(void) /* Do a readback to assure write has been done */ prm_read_mod_reg(WKUP_MOD, PM_WKEN); - while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) & + while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) & OMAP3430_ST_IO_CHAIN_MASK)) { timeout++; if (timeout > 1000) { @@ -108,7 +108,7 @@ static void omap3_enable_io_chain(void) return; } prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, - WKUP_MOD, PM_WKST); + WKUP_MOD, PM_WKEN); } } } diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c index c68f799e83c..d72d1ac3033 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -20,6 +20,8 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/dma-mapping.h> + #include <asm/io.h> #include <plat/mux.h> diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index d60db87dde0..fa6a708b409 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -697,7 +697,7 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = { }; /* Board I2C devices. */ -static struct i2c_board_info __initdata mioa701_i2c_devices[] = { +static struct i2c_board_info mioa701_i2c_devices[] = { { I2C_BOARD_INFO("mt9m111", 0x5d), }, diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 033b567e50b..ce1104d1bc1 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -263,11 +263,11 @@ const struct matrix_keymap_data palmtc_keymap_data = { .keymap_size = ARRAY_SIZE(palmtc_matrix_keys), }; -const static unsigned int palmtc_keypad_row_gpios[] = { +static const unsigned int palmtc_keypad_row_gpios[] = { 0, 9, 10, 11 }; -const static unsigned int palmtc_keypad_col_gpios[] = { +static const unsigned int palmtc_keypad_col_gpios[] = { 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80 }; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 4d2413ed0ff..c1048a35f18 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = { .type = "max7310", .addr = 0x18, .platform_data = &akita_ioexp, + }, { + .type = "wm8750", + .addr = 0x1b, }, }; diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index f5d1ae3db3a..d303c6929d3 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -3,8 +3,9 @@ * * Support for the Zipit Z2 Handheld device. * - * Author: Ken McGuire - * Created: Jan 25, 2009 + * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> + * + * Based on research and code by: Ken McGuire * Based on mainstone.c as modified for the Zipit Z2. * * This program is free software; you can redistribute it and/or modify @@ -157,21 +158,14 @@ static struct mtd_partition z2_flash_parts[] = { { .name = "U-Boot Bootloader", .offset = 0x0, - .size = 0x20000, - }, - { - .name = "Linux Kernel", - .offset = 0x20000, - .size = 0x220000, - }, - { - .name = "Filesystem", - .offset = 0x240000, - .size = 0x5b0000, - }, - { + .size = 0x40000, + }, { .name = "U-Boot Environment", - .offset = 0x7f0000, + .offset = 0x40000, + .size = 0x60000, + }, { + .name = "Flash", + .offset = 0x60000, .size = MTDPART_SIZ_FULL, }, }; diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index ee5e392430e..b4575ae9648 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -18,6 +18,7 @@ config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore tile" depends on MACH_REALVIEW_EB select CPU_V6 + select ARCH_HAS_BARRIERS if SMP help Enable support for the ARM11MPCore tile on the Realview platform. @@ -35,6 +36,7 @@ config MACH_REALVIEW_PB11MP select CPU_V6 select ARM_GIC select HAVE_PATA_PLATFORM + select ARCH_HAS_BARRIERS if SMP help Include support for the ARM(R) RealView MPCore Platform Baseboard. PB11MPCore is a platform with an on-board ARM11MPCore and has diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h new file mode 100644 index 00000000000..0c5d749d7b5 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/barriers.h @@ -0,0 +1,8 @@ +/* + * Barriers redefined for RealView ARM11MPCore platforms with L220 cache + * controller to work around hardware errata causing the outer_sync() + * operation to deadlock the system. + */ +#define mb() dsb() +#define rmb() dmb() +#define wmb() mb() diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 422ccd70d5f..4425018fab8 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -32,6 +32,7 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/pmu.h> +#include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/localtimer.h> @@ -457,7 +458,7 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_EB_UART0_BASE, + .phys_io = REALVIEW_EB_UART0_BASE & SECTION_MASK, .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 96568ebfa2b..099a1f125cf 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -32,6 +32,7 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/pmu.h> +#include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -351,7 +352,7 @@ static void __init realview_pb1176_init(void) MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PB1176_UART0_BASE, + .phys_io = REALVIEW_PB1176_UART0_BASE & SECTION_MASK, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_pb1176_fixup, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 7fbefbbebaf..0e07a5ccb75 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -32,6 +32,7 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/pmu.h> +#include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/localtimer.h> @@ -373,7 +374,7 @@ static void __init realview_pb11mp_init(void) MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PB11MP_UART0_BASE, + .phys_io = REALVIEW_PB11MP_UART0_BASE & SECTION_MASK, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index d3c113b3dfc..ac2f06f1ca5 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -31,6 +31,7 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/pmu.h> +#include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/mach/arch.h> @@ -323,7 +324,7 @@ static void __init realview_pba8_init(void) MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PBA8_UART0_BASE, + .phys_io = REALVIEW_PBA8_UART0_BASE & SECTION_MASK, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index a235ba30996..08fd683adc4 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -31,6 +31,7 @@ #include <asm/mach-types.h> #include <asm/pmu.h> #include <asm/smp_twd.h> +#include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -409,7 +410,7 @@ static void __init realview_pbx_init(void) MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PBX_UART0_BASE, + .phys_io = REALVIEW_PBX_UART0_BASE & SECTION_MASK, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_pbx_fixup, diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index c7bc4199e3a..4556aea9c3c 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o obj-$(CONFIG_MACH_U5500) += board-u5500.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 6544855af2f..fe84b9021c7 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -16,6 +16,7 @@ #include <asm/clkdev.h> +#include <plat/mtu.h> #include <mach/hardware.h> #include "clock.h" @@ -59,6 +60,9 @@ #define PRCM_DMACLK_MGT 0x074 #define PRCM_B2R2CLK_MGT 0x078 #define PRCM_TVCLK_MGT 0x07C +#define PRCM_TCR 0x1C8 +#define PRCM_TCR_STOPPED (1 << 16) +#define PRCM_TCR_DOZE_MODE (1 << 17) #define PRCM_UNIPROCLK_MGT 0x278 #define PRCM_SSPCLK_MGT 0x280 #define PRCM_RNGCLK_MGT 0x284 @@ -120,10 +124,95 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); +/* + * The MTU has a separate, rather complex muxing setup + * with alternative parents (peripheral cluster or + * ULP or fixed 32768 Hz) depending on settings + */ +static unsigned long clk_mtu_get_rate(struct clk *clk) +{ + void __iomem *addr = __io_address(U8500_PRCMU_BASE) + + PRCM_TCR; + u32 tcr = readl(addr); + int mtu = (int) clk->data; + /* + * One of these is selected eventually + * TODO: Replace the constant with a reference + * to the ULP source once this is modeled. + */ + unsigned long clk32k = 32768; + unsigned long mturate; + unsigned long retclk; + + /* Get the rate from the parent as a default */ + if (clk->parent_periph) + mturate = clk_get_rate(clk->parent_periph); + else if (clk->parent_cluster) + mturate = clk_get_rate(clk->parent_cluster); + else + /* We need to be connected SOMEWHERE */ + BUG(); + + /* + * Are we in doze mode? + * In this mode the parent peripheral or the fixed 32768 Hz + * clock is fed into the block. + */ + if (!(tcr & PRCM_TCR_DOZE_MODE)) { + /* + * Here we're using the clock input from the APE ULP + * clock domain. But first: are the timers stopped? + */ + if (tcr & PRCM_TCR_STOPPED) { + clk32k = 0; + mturate = 0; + } else { + /* Else default mode: 0 and 2.4 MHz */ + clk32k = 0; + if (cpu_is_u5500()) + /* DB5500 divides by 8 */ + mturate /= 8; + else if (cpu_is_u8500ed()) { + /* + * This clocking setting must not be used + * in the ED chip, it is simply not + * connected anywhere! + */ + mturate = 0; + BUG(); + } else + /* + * In this mode the ulp38m4 clock is divided + * by a factor 16, on the DB8500 typically + * 38400000 / 16 ~ 2.4 MHz. + * TODO: Replace the constant with a reference + * to the ULP source once this is modeled. + */ + mturate = 38400000 / 16; + } + } + + /* Return the clock selected for this MTU */ + if (tcr & (1 << mtu)) + retclk = clk32k; + else + retclk = mturate; + + pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk); + return retclk; +} + unsigned long clk_get_rate(struct clk *clk) { unsigned long rate; + /* + * If there is a custom getrate callback for this clock, + * it will take precedence. + */ + if (clk->get_rate) + return clk->get_rate(clk); + if (clk->ops && clk->ops->get_rate) return clk->ops->get_rate(clk); @@ -341,8 +430,9 @@ static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL); /* Peripheral Cluster #6 */ -static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL); -static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL); +/* MTU ID in data */ +static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1); +static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0); static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL); static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL); static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL); @@ -357,8 +447,9 @@ static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk); /* Peripheral Cluster #7 */ static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL); -static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL); -static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL); +/* MTU ID in data */ +static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1); +static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0); static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); @@ -503,15 +594,17 @@ static struct clk_lookup u8500_v1_clks[] = { CLK(uiccclk, "uicc", NULL), }; -static int __init clk_init(void) +int __init clk_init(void) { if (cpu_is_u8500ed()) { clk_prcmu_ops.enable = clk_prcmu_ed_enable; clk_prcmu_ops.disable = clk_prcmu_ed_disable; + clk_per6clk.rate = 100000000; } else if (cpu_is_u5500()) { /* Clock tree for U5500 not implemented yet */ clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; + clk_per6clk.rate = 26000000; } clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); @@ -522,4 +615,3 @@ static int __init clk_init(void) return 0; } -arch_initcall(clk_init); diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h index e4f99b65026..a0580250152 100644 --- a/arch/arm/mach-ux500/clock.h +++ b/arch/arm/mach-ux500/clock.h @@ -28,6 +28,9 @@ struct clkops { * @ops: pointer to clkops struct used to control this clock * @name: name, for debugging * @enabled: refcount. positive if enabled, zero if disabled + * @get_rate: custom callback for getting the clock rate + * @data: custom per-clock data for example for the get_rate + * callback * @rate: fixed rate for clocks which don't implement * ops->getrate * @prcmu_cg_off: address offset of the combined enable/disable register @@ -67,6 +70,8 @@ struct clk { const struct clkops *ops; const char *name; unsigned int enabled; + unsigned long (*get_rate)(struct clk *); + void *data; unsigned long rate; struct list_head list; @@ -117,9 +122,26 @@ struct clk clk_##_name = { \ .parent_periph = _kernclk \ } +#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcc_ops, \ + .cluster = _pclust, \ + .prcc_bus = _bus_en, \ + .prcc_kernel = _kernel_en, \ + .parent_cluster = &clk_per##_pclust##clk, \ + .parent_periph = _kernclk, \ + .get_rate = _callback, \ + .data = (void *) _data \ + } + + #define CLK(_clk, _devname, _conname) \ { \ .clk = &clk_##_clk, \ .dev_id = _devname, \ .con_id = _conname, \ } + +int __init clk_db8500_ed_fixup(void); +int __init clk_init(void); diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index d81ad023963..e0fd747e447 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -62,6 +62,12 @@ void __init ux500_init_irq(void) { gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29); gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE)); + + /* + * Init clocks here so that they are available for system timer + * initialization. + */ + clk_init(); } #ifdef CONFIG_CACHE_L2X0 diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index e6f73030d5f..6353459bb56 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -2,6 +2,7 @@ * Versatile Express Core Tile Cortex A9x4 Support */ #include <linux/init.h> +#include <linux/gfp.h> #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> @@ -9,6 +10,7 @@ #include <linux/amba/clcd.h> #include <asm/clkdev.h> +#include <asm/pgtable.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> @@ -235,7 +237,7 @@ static void ct_ca9x4_init(void) } MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") - .phys_io = V2M_UART0, + .phys_io = V2M_UART0 & SECTION_MASK, .io_pg_offst = (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .map_io = ct_ca9x4_map_io, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 346ae14824a..101105e5261 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -735,6 +735,25 @@ config NEEDS_SYSCALL_FOR_CMPXCHG Forget about fast user space cmpxchg support. It is just not possible. +config DMA_CACHE_RWFO + bool "Enable read/write for ownership DMA cache maintenance" + depends on CPU_V6 && SMP + default y + help + The Snoop Control Unit on ARM11MPCore does not detect the + cache maintenance operations and the dma_{map,unmap}_area() + functions may leave stale cache entries on other CPUs. By + enabling this option, Read or Write For Ownership in the ARMv6 + DMA cache maintenance functions is performed. These LDR/STR + instructions change the cache line state to shared or modified + so that the cache operation has the desired effect. + + Note that the workaround is only valid on processors that do + not perform speculative loads into the D-cache. For such + processors, if cache maintenance operations are not broadcast + in hardware, other workarounds are needed (e.g. cache + maintenance broadcasting in software via FIQ). + config OUTER_CACHE bool @@ -794,6 +813,8 @@ config ARM_L1_CACHE_SHIFT config ARM_DMA_MEM_BUFFERABLE bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7 + depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \ + MACH_REALVIEW_PB11MP) default y if CPU_V6 || CPU_V7 help Historically, the kernel has used strongly ordered mappings to diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index e46ecd84713..86aa689ef1a 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -211,8 +211,9 @@ v6_dma_inv_range: mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line #endif 1: -#ifdef CONFIG_SMP - str r0, [r0] @ write for ownership +#ifdef CONFIG_DMA_CACHE_RWFO + ldr r2, [r0] @ read for ownership + str r2, [r0] @ write for ownership #endif #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c6, 1 @ invalidate D line @@ -234,7 +235,7 @@ v6_dma_inv_range: v6_dma_clean_range: bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: -#ifdef CONFIG_SMP +#ifdef CONFIG_DMA_CACHE_RWFO ldr r2, [r0] @ read for ownership #endif #ifdef HARVARD_CACHE @@ -257,7 +258,7 @@ v6_dma_clean_range: ENTRY(v6_dma_flush_range) bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: -#ifdef CONFIG_SMP +#ifdef CONFIG_DMA_CACHE_RWFO ldr r2, [r0] @ read for ownership str r2, [r0] @ write for ownership #endif @@ -283,9 +284,13 @@ ENTRY(v6_dma_map_area) add r1, r1, r0 teq r2, #DMA_FROM_DEVICE beq v6_dma_inv_range +#ifndef CONFIG_DMA_CACHE_RWFO + b v6_dma_clean_range +#else teq r2, #DMA_TO_DEVICE beq v6_dma_clean_range b v6_dma_flush_range +#endif ENDPROC(v6_dma_map_area) /* @@ -295,6 +300,11 @@ ENDPROC(v6_dma_map_area) * - dir - DMA direction */ ENTRY(v6_dma_unmap_area) +#ifndef CONFIG_DMA_CACHE_RWFO + add r1, r1, r0 + teq r2, #DMA_TO_DEVICE + bne v6_dma_inv_range +#endif mov pc, lr ENDPROC(v6_dma_unmap_area) diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c index 5eb4fd93893..ac163de7dc0 100644 --- a/arch/arm/mm/copypage-feroceon.c +++ b/arch/arm/mm/copypage-feroceon.c @@ -18,7 +18,7 @@ feroceon_copy_user_page(void *kto, const void *kfrom) { asm("\ stmfd sp!, {r4-r9, lr} \n\ - mov ip, %0 \n\ + mov ip, %2 \n\ 1: mov lr, r1 \n\ ldmia r1!, {r2 - r9} \n\ pld [lr, #32] \n\ @@ -64,7 +64,7 @@ feroceon_copy_user_page(void *kto, const void *kfrom) mcr p15, 0, ip, c7, c10, 4 @ drain WB\n\ ldmfd sp!, {r4-r9, pc}" : - : "I" (PAGE_SIZE)); + : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE)); } void feroceon_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c index 7c2eb55cd4a..cb589cbb2b6 100644 --- a/arch/arm/mm/copypage-v4wb.c +++ b/arch/arm/mm/copypage-v4wb.c @@ -27,7 +27,7 @@ v4wb_copy_user_page(void *kto, const void *kfrom) { asm("\ stmfd sp!, {r4, lr} @ 2\n\ - mov r2, %0 @ 1\n\ + mov r2, %2 @ 1\n\ ldmia r1!, {r3, r4, ip, lr} @ 4\n\ 1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ stmia r0!, {r3, r4, ip, lr} @ 4\n\ @@ -44,7 +44,7 @@ v4wb_copy_user_page(void *kto, const void *kfrom) mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB\n\ ldmfd sp!, {r4, pc} @ 3" : - : "I" (PAGE_SIZE / 64)); + : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64)); } void v4wb_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c index 172e6a55458..30c7d048a32 100644 --- a/arch/arm/mm/copypage-v4wt.c +++ b/arch/arm/mm/copypage-v4wt.c @@ -25,7 +25,7 @@ v4wt_copy_user_page(void *kto, const void *kfrom) { asm("\ stmfd sp!, {r4, lr} @ 2\n\ - mov r2, %0 @ 1\n\ + mov r2, %2 @ 1\n\ ldmia r1!, {r3, r4, ip, lr} @ 4\n\ 1: stmia r0!, {r3, r4, ip, lr} @ 4\n\ ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\ @@ -40,7 +40,7 @@ v4wt_copy_user_page(void *kto, const void *kfrom) mcr p15, 0, r2, c7, c7, 0 @ flush ID cache\n\ ldmfd sp!, {r4, pc} @ 3" : - : "I" (PAGE_SIZE / 64)); + : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64)); } void v4wt_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c index 747ad4140fc..f9cde0702f1 100644 --- a/arch/arm/mm/copypage-xsc3.c +++ b/arch/arm/mm/copypage-xsc3.c @@ -34,7 +34,7 @@ xsc3_mc_copy_user_page(void *kto, const void *kfrom) { asm("\ stmfd sp!, {r4, r5, lr} \n\ - mov lr, %0 \n\ + mov lr, %2 \n\ \n\ pld [r1, #0] \n\ pld [r1, #32] \n\ @@ -67,7 +67,7 @@ xsc3_mc_copy_user_page(void *kto, const void *kfrom) \n\ ldmfd sp!, {r4, r5, pc}" : - : "I" (PAGE_SIZE / 64 - 1)); + : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1)); } void xsc3_mc_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 13fa536d82e..9e7742f0a10 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -24,15 +24,6 @@ #include <asm/tlbflush.h> #include <asm/sizes.h> -/* Sanity check size */ -#if (CONSISTENT_DMA_SIZE % SZ_2M) -#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB" -#endif - -#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) -#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) -#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) - static u64 get_coherent_dma_mask(struct device *dev) { u64 mask = ISA_DMA_THRESHOLD; @@ -123,6 +114,15 @@ static void __dma_free_buffer(struct page *page, size_t size) } #ifdef CONFIG_MMU +/* Sanity check size */ +#if (CONSISTENT_DMA_SIZE % SZ_2M) +#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB" +#endif + +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) +#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) +#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) + /* * These are the page tables (2MB each) covering uncached, DMA consistent allocations */ diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 92f5801f99c..cbfb2edcf7d 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -393,6 +393,9 @@ do_translation_fault(unsigned long addr, unsigned int fsr, if (addr < TASK_SIZE) return do_page_fault(addr, fsr, regs); + if (user_mode(regs)) + goto bad_area; + index = pgd_index(addr); /* diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 77b030f5ec0..086816b205b 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -48,7 +48,16 @@ void *kmap_atomic(struct page *page, enum km_type type) debug_kmap_atomic(type); - kmap = kmap_high_get(page); +#ifdef CONFIG_DEBUG_HIGHMEM + /* + * There is no cache coherency issue when non VIVT, so force the + * dedicated kmap usage for better debugging purposes in that case. + */ + if (!cache_is_vivt()) + kmap = NULL; + else +#endif + kmap = kmap_high_get(page); if (kmap) return kmap; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 1ba6cf5a2c0..f6a99946532 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -678,10 +678,10 @@ void __init mem_init(void) void free_initmem(void) { #ifdef CONFIG_HAVE_TCM - extern char *__tcm_start, *__tcm_end; + extern char __tcm_start, __tcm_end; - totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)), - __phys_to_pfn(__pa(__tcm_end)), + totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)), + __phys_to_pfn(__pa(&__tcm_end)), "TCM link"); #endif diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index 0ff3798769a..08aaa4a7f65 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -13,7 +13,9 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/clockchips.h> +#include <linux/clk.h> #include <linux/jiffies.h> +#include <linux/err.h> #include <asm/mach/time.h> #include <plat/mtu.h> @@ -124,13 +126,25 @@ static struct irqaction nmdk_timer_irq = { void __init nmdk_timer_init(void) { unsigned long rate; - u32 cr = MTU_CRn_32BITS;; + struct clk *clk0; + struct clk *clk1; + u32 cr; + + clk0 = clk_get_sys("mtu0", NULL); + BUG_ON(IS_ERR(clk0)); + + clk1 = clk_get_sys("mtu1", NULL); + BUG_ON(IS_ERR(clk1)); + + clk_enable(clk0); + clk_enable(clk1); /* * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: * use a divide-by-16 counter if it's more than 16MHz */ - rate = CLOCK_TICK_RATE; + cr = MTU_CRn_32BITS;; + rate = clk_get_rate(clk0); if (rate > 16 << 20) { rate /= 16; cr |= MTU_CRn_PRESCALE_16; @@ -153,6 +167,14 @@ void __init nmdk_timer_init(void) nmdk_clksrc.name); /* Timer 1 is used for events, fix according to rate */ + cr = MTU_CRn_32BITS; + rate = clk_get_rate(clk1); + if (rate > 16 << 20) { + rate /= 16; + cr |= MTU_CRn_PRESCALE_16; + } else { + cr |= MTU_CRn_PRESCALE_1; + } writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); nmdk_clkevt.max_delta_ns = diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index c64875f11fa..44bafdab2dc 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -541,11 +541,11 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer) * timer is stopped */ udelay(3500000 / clk_get_rate(timer->fclk) + 1); - /* Ack possibly pending interrupt */ - omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, - OMAP_TIMER_INT_OVERFLOW); #endif } + /* Ack possibly pending interrupt */ + omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, + OMAP_TIMER_INT_OVERFLOW); } EXPORT_SYMBOL_GPL(omap_dm_timer_stop); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 393e9219a5b..9b7e3545f32 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -673,6 +673,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, if (cpu_is_omap34xx() || cpu_is_omap44xx()) clk_disable(bank->dbck); } + bank->dbck_enable_mask = val; __raw_writel(val, reg); } diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index e43983ba59c..8ce0de247c7 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -140,8 +140,10 @@ static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags) return ERR_PTR(-ENOMEM); err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL); - if (err) + if (err) { + kfree(sgt); return ERR_PTR(err); + } pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries); diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 6187edfbcb7..a17cc0c6a6b 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -2,8 +2,9 @@ # Makefile for code common across different PXA processor families # -obj-y := dma.o pmu.o +obj-y := dma.o +obj-$(CONFIG_ARCH_PXA) += pmu.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 66dc2d03b7f..d66cead97d2 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -277,7 +277,7 @@ ENTRY(vfp_put_double) #ifdef CONFIG_VFPv3 @ d16 - d31 registers .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 -1: mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr +1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr mov pc, lr .org 1b + 8 .endr |