diff options
Diffstat (limited to 'arch/arm')
567 files changed, 6390 insertions, 5977 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 599e1634840..377a7a595b0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -28,6 +28,7 @@ config ARM select HAVE_C_RECORDMCOUNT select HAVE_GENERIC_HARDIRQS select HAVE_SPARSE_IRQ + select GENERIC_IRQ_SHOW help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -235,6 +236,7 @@ config ARCH_INTEGRATOR select ICST select GENERIC_CLOCKEVENTS select PLAT_VERSATILE + select PLAT_VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. @@ -242,11 +244,11 @@ config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA select CLKDEV_LOOKUP - select HAVE_SCHED_CLOCK select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB help @@ -257,11 +259,12 @@ config ARCH_VERSATILE select ARM_AMBA select ARM_VIC select CLKDEV_LOOKUP - select HAVE_SCHED_CLOCK select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD + select PLAT_VERSATILE_FPGA_IRQ select ARM_TIMER_SP804 help This enables support for ARM Ltd Versatile board. @@ -274,9 +277,10 @@ config ARCH_VEXPRESS select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select HAVE_CLK - select HAVE_SCHED_CLOCK + select HAVE_PATA_PLATFORM select ICST select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD help This enables support for the ARM Ltd Versatile Express boards. @@ -362,6 +366,7 @@ config ARCH_MXC select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select HAVE_SCHED_CLOCK help Support for Freescale MXC/iMX-based family of processors @@ -689,7 +694,7 @@ config ARCH_S3C2410 the Samsung SMDK2410 development board (and derivatives). Note, the S3C2416 and the S3C2450 are so close that they even share - the same SoC ID code. This means that there is no seperate machine + the same SoC ID code. This means that there is no separate machine directory (no arch/arm/mach-s3c2450) as the S3C2416 was first. config ARCH_S3C64XX @@ -1011,6 +1016,7 @@ source "arch/arm/mach-ux500/Kconfig" source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" +source "arch/arm/plat-versatile/Kconfig" source "arch/arm/mach-vt8500/Kconfig" @@ -1534,7 +1540,6 @@ config HIGHMEM config HIGHPTE bool "Allocate 2nd-level pagetables from highmem" depends on HIGHMEM - depends on !OUTER_CACHE config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" @@ -2005,6 +2010,9 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE + depends on !ARCH_S5P64X0 && !ARCH_S5P6442 + depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ + CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y endmenu diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 901e6dff843..2cef8e13f9f 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -34,7 +34,7 @@ config PROCESSOR_ID used instead of the auto-probing which utilizes the register. config REMAP_VECTORS_TO_RAM - bool 'Install vectors to the begining of RAM' if DRAM_BASE + bool 'Install vectors to the beginning of RAM' if DRAM_BASE depends on DRAM_BASE help The kernel needs to change the hardware exception vectors. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 494224a9b45..03d01d783e3 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -63,17 +63,6 @@ config DEBUG_USER 8 - SIGSEGV faults 16 - SIGBUS faults -config DEBUG_ERRORS - bool "Verbose kernel error messages" - depends on DEBUG_KERNEL - help - This option controls verbose debugging information which can be - printed when the kernel detects an internal error. This debugging - information is useful to kernel hackers when tracking down problems, - but mostly meaningless to other people. It's safe to say Y unless - you are concerned with the code size or don't want to see these - messages. - config DEBUG_STACK_USAGE bool "Enable stack utilization instrumentation" depends on DEBUG_KERNEL diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index f9f77c65dff..0c6852d9350 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -74,7 +74,7 @@ ZTEXTADDR := $(CONFIG_ZBOOT_ROM_TEXT) ZBSSADDR := $(CONFIG_ZBOOT_ROM_BSS) else ZTEXTADDR := 0 -ZBSSADDR := ALIGN(4) +ZBSSADDR := ALIGN(8) endif SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ @@ -95,8 +95,8 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif -EXTRA_CFLAGS := -fpic -fno-builtin -EXTRA_AFLAGS := -Wa,-march=all +ccflags-y := -fpic -fno-builtin +asflags-y := -Wa,-march=all # Provide size of uncompressed kernel to the decompressor via a linker symbol. LDFLAGS_vmlinux = --defsym _image_size=$(shell stat -c "%s" $(obj)/../Image) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 84ac4d65631..49f5b2eaaa8 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -21,20 +21,12 @@ #if defined(CONFIG_DEBUG_ICEDCC) -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) .macro loadsp, rb, tmp .endm .macro writeb, ch, rb mcr p14, 0, \ch, c0, c5, 0 .endm -#elif defined(CONFIG_CPU_V7) - .macro loadsp, rb, tmp - .endm - .macro writeb, ch, rb -wait: mrc p14, 0, pc, c0, c1, 0 - bcs wait - mcr p14, 0, \ch, c0, c5, 0 - .endm #elif defined(CONFIG_CPU_XSCALE) .macro loadsp, rb, tmp .endm @@ -187,15 +179,14 @@ not_angel: bl cache_on restart: adr r0, LC0 - ldmia r0, {r1, r2, r3, r5, r6, r9, r11, r12} - ldr sp, [r0, #32] + ldmia r0, {r1, r2, r3, r6, r9, r11, r12} + ldr sp, [r0, #28] /* * We might be running at a different address. We need * to fix up various pointers. */ sub r0, r0, r1 @ calculate the delta offset - add r5, r5, r0 @ _start add r6, r6, r0 @ _edata #ifndef CONFIG_ZBOOT_ROM @@ -214,31 +205,40 @@ restart: adr r0, LC0 /* * Check to see if we will overwrite ourselves. * r4 = final kernel address - * r5 = start of this image * r9 = size of decompressed image * r10 = end of this image, including bss/stack/malloc space if non XIP * We basically want: - * r4 >= r10 -> OK - * r4 + image length <= r5 -> OK + * r4 - 16k page directory >= r10 -> OK + * r4 + image length <= current position (pc) -> OK */ + add r10, r10, #16384 cmp r4, r10 bhs wont_overwrite add r10, r4, r9 - cmp r10, r5 + ARM( cmp r10, pc ) + THUMB( mov lr, pc ) + THUMB( cmp r10, lr ) bls wont_overwrite /* * Relocate ourselves past the end of the decompressed kernel. - * r5 = start of this image * r6 = _edata * r10 = end of the decompressed kernel * Because we always copy ahead, we need to do it from the end and go * backward in case the source and destination overlap. */ - /* Round up to next 256-byte boundary. */ - add r10, r10, #256 + /* + * Bump to the next 256-byte boundary with the size of + * the relocation code added. This avoids overwriting + * ourself when the offset is small. + */ + add r10, r10, #((reloc_code_end - restart + 256) & ~255) bic r10, r10, #255 + /* Get start of code we want to copy and align it down. */ + adr r5, restart + bic r5, r5, #31 + sub r9, r6, r5 @ size to copy add r9, r9, #31 @ rounded up to a multiple bic r9, r9, #31 @ ... of 32 bytes @@ -253,6 +253,11 @@ restart: adr r0, LC0 /* Preserve offset to relocated code. */ sub r6, r9, r6 +#ifndef CONFIG_ZBOOT_ROM + /* cache_clean_flush may use the stack, so relocate it */ + add sp, sp, r6 +#endif + bl cache_clean_flush adr r0, BSYM(restart) @@ -341,7 +346,6 @@ not_relocated: mov r0, #0 LC0: .word LC0 @ r1 .word __bss_start @ r2 .word _end @ r3 - .word _start @ r5 .word _edata @ r6 .word _image_size @ r9 .word _got_start @ r11 @@ -1070,6 +1074,7 @@ memdump: mov r12, r0 #endif .ltorg +reloc_code_end: .align .section ".stack", "aw", %nobits diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 4657e877bf8..2df38263124 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -36,7 +36,7 @@ extern void error(char *x); #ifdef CONFIG_DEBUG_ICEDCC -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) static void icedcc_putc(int ch) { @@ -52,16 +52,6 @@ static void icedcc_putc(int ch) asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch)); } -#elif defined(CONFIG_CPU_V7) - -static void icedcc_putc(int ch) -{ - asm( - "wait: mrc p14, 0, pc, c0, c1, 0 \n\ - bcs wait \n\ - mcr p14, 0, %0, c0, c5, 0 " - : : "r" (ch)); -} #elif defined(CONFIG_CPU_XSCALE) diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c index e6180af241f..7453c8337b8 100644 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -10,7 +10,8 @@ */ #include <linux/mmc/sh_mmcif.h> -#include <mach/mmcif.h> +#include <linux/mmc/boot.h> +#include <mach/mmc.h> #define MMCIF_BASE (void __iomem *)0xe6bd0000 @@ -41,8 +42,8 @@ */ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len) { - mmcif_init_progress(); - mmcif_update_progress(MMCIF_PROGRESS_ENTER); + mmc_init_progress(); + mmc_update_progress(MMC_PROGRESS_ENTER); /* Initialise MMC * registers: PORT84CR-PORT92CR @@ -68,12 +69,12 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len) /* Enable clock to MMC hardware block */ __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3); - mmcif_update_progress(MMCIF_PROGRESS_INIT); + mmc_update_progress(MMC_PROGRESS_INIT); /* setup MMCIF hardware */ sh_mmcif_boot_init(MMCIF_BASE); - mmcif_update_progress(MMCIF_PROGRESS_LOAD); + mmc_update_progress(MMC_PROGRESS_LOAD); /* load kernel via MMCIF interface */ sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */ @@ -83,5 +84,5 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len) /* Disable clock to MMC hardware block */ __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3); - mmcif_update_progress(MMCIF_PROGRESS_DONE); + mmc_update_progress(MMC_PROGRESS_DONE); } diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index 5309909d728..ea80abe7884 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -54,6 +54,7 @@ SECTIONS .bss : { *(.bss) } _end = .; + . = ALIGN(8); /* the stack must be 64-bit aligned */ .stack : { *(.stack) } .stab 0 : { *(.stab) } diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index e7521bca2c3..6ea9b6f3607 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -16,5 +16,4 @@ obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_ARCH_IXP2000) += uengine.o obj-$(CONFIG_ARCH_IXP23XX) += uengine.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o -obj-$(CONFIG_COMMON_CLKDEV) += clkdev.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index cb6b041c39d..f70ec7dadeb 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -213,8 +213,8 @@ static int gic_set_wake(struct irq_data *d, unsigned int on) static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) { - struct gic_chip_data *chip_data = get_irq_data(irq); - struct irq_chip *chip = get_irq_chip(irq); + struct gic_chip_data *chip_data = irq_get_handler_data(irq); + struct irq_chip *chip = irq_get_chip(irq); unsigned int cascade_irq, gic_irq; unsigned long status; @@ -257,9 +257,9 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) { if (gic_nr >= MAX_GIC_NR) BUG(); - if (set_irq_data(irq, &gic_data[gic_nr]) != 0) + if (irq_set_handler_data(irq, &gic_data[gic_nr]) != 0) BUG(); - set_irq_chained_handler(irq, gic_handle_cascade_irq); + irq_set_chained_handler(irq, gic_handle_cascade_irq); } static void __init gic_dist_init(struct gic_chip_data *gic, @@ -319,9 +319,8 @@ static void __init gic_dist_init(struct gic_chip_data *gic, * Setup the Linux IRQ subsystem. */ for (i = irq_start; i < irq_limit; i++) { - set_irq_chip(i, &gic_chip); - set_irq_chip_data(i, gic); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &gic_chip, handle_level_irq); + irq_set_chip_data(i, gic); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } @@ -382,7 +381,7 @@ void __cpuinit gic_enable_ppi(unsigned int irq) unsigned long flags; local_irq_save(flags); - irq_to_desc(irq)->status |= IRQ_NOPROBE; + irq_set_status_flags(irq, IRQ_NOPROBE); gic_unmask_irq(irq_get_irq_data(irq)); local_irq_restore(flags); } diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index fcddd48fe9d..7a21927c52e 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -88,8 +88,8 @@ void it8152_init_irq(void) __raw_writel((0), IT8152_INTC_LDCNIRR); for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) { - set_irq_chip(irq, &it8152_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &it8152_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index a026a6bf489..b55c3625d7e 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -140,7 +140,7 @@ static struct locomo_dev_info locomo_devices[] = { static void locomo_handler(unsigned int irq, struct irq_desc *desc) { - struct locomo *lchip = get_irq_chip_data(irq); + struct locomo *lchip = irq_get_chip_data(irq); int req, i; /* Acknowledge the parent IRQ */ @@ -197,15 +197,14 @@ static void locomo_setup_irq(struct locomo *lchip) /* * Install handler for IRQ_LOCOMO_HW. */ - set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); - set_irq_chip_data(lchip->irq, lchip); - set_irq_chained_handler(lchip->irq, locomo_handler); + irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); + irq_set_chip_data(lchip->irq, lchip); + irq_set_chained_handler(lchip->irq, locomo_handler); /* Install handlers for IRQ_LOCOMO_* */ for ( ; irq <= lchip->irq_base + 3; irq++) { - set_irq_chip(irq, &locomo_chip); - set_irq_chip_data(irq, lchip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq); + irq_set_chip_data(irq, lchip); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } @@ -476,8 +475,8 @@ static void __locomo_remove(struct locomo *lchip) device_for_each_child(lchip->dev, NULL, locomo_remove_child); if (lchip->irq != NO_IRQ) { - set_irq_chained_handler(lchip->irq, NULL); - set_irq_data(lchip->irq, NULL); + irq_set_chained_handler(lchip->irq, NULL); + irq_set_handler_data(lchip->irq, NULL); } iounmap(lchip->base); diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 8f0f86db360..97912fa4878 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1045,7 +1045,7 @@ static inline int _loop(unsigned dry_run, u8 buf[], unsigned lcnt0, lcnt1, ljmp0, ljmp1; struct _arg_LPEND lpend; - /* Max iterations possibile in DMALP is 256 */ + /* Max iterations possible in DMALP is 256 */ if (*bursts >= 256*256) { lcnt1 = 256; lcnt0 = 256; @@ -1446,7 +1446,7 @@ int pl330_update(const struct pl330_info *pi) } for (ev = 0; ev < pi->pcfg.num_events; ev++) { - if (val & (1 << ev)) { /* Event occured */ + if (val & (1 << ev)) { /* Event occurred */ struct pl330_thread *thrd; u32 inten = readl(regs + INTEN); int active; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index eb9796b0dab..a12b33c0dc4 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -202,7 +202,7 @@ static void sa1111_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned int stat0, stat1, i; - struct sa1111 *sachip = get_irq_data(irq); + struct sa1111 *sachip = irq_get_handler_data(irq); void __iomem *mapbase = sachip->base + SA1111_INTC; stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0); @@ -472,25 +472,25 @@ static void sa1111_setup_irq(struct sa1111 *sachip) sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1); for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) { - set_irq_chip(irq, &sa1111_low_chip); - set_irq_chip_data(irq, sachip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &sa1111_low_chip, + handle_edge_irq); + irq_set_chip_data(irq, sachip); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) { - set_irq_chip(irq, &sa1111_high_chip); - set_irq_chip_data(irq, sachip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &sa1111_high_chip, + handle_edge_irq); + irq_set_chip_data(irq, sachip); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } /* * Register SA1111 interrupt */ - set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); - set_irq_data(sachip->irq, sachip); - set_irq_chained_handler(sachip->irq, sa1111_irq_handler); + irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); + irq_set_handler_data(sachip->irq, sachip); + irq_set_chained_handler(sachip->irq, sa1111_irq_handler); } /* @@ -815,8 +815,8 @@ static void __sa1111_remove(struct sa1111 *sachip) clk_disable(sachip->clk); if (sachip->irq != NO_IRQ) { - set_irq_chained_handler(sachip->irq, NULL); - set_irq_data(sachip->irq, NULL); + irq_set_chained_handler(sachip->irq, NULL); + irq_set_handler_data(sachip->irq, NULL); release_mem_region(sachip->phys + SA1111_INTC, 512); } diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index ae5fe7292e0..113085a7712 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -305,9 +305,9 @@ static void __init vic_set_irq_sources(void __iomem *base, if (vic_sources & (1 << i)) { unsigned int irq = irq_start + i; - set_irq_chip(irq, &vic_chip); - set_irq_chip_data(irq, base); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &vic_chip, + handle_level_irq); + irq_set_chip_data(irq, base); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/configs/at91x40_defconfig b/arch/arm/configs/at91x40_defconfig new file mode 100644 index 00000000000..c55e9212fcb --- /dev/null +++ b/arch/arm/configs/at91x40_defconfig @@ -0,0 +1,48 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_EMBEDDED=y +# CONFIG_HOTPLUG is not set +# CONFIG_ELF_CORE is not set +# CONFIG_FUTEX is not set +# CONFIG_TIMERFD is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_MMU is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91X40=y +CONFIG_MACH_AT91EB01=y +CONFIG_AT91_EARLY_USART0=y +CONFIG_CPU_ARM7TDMI=y +CONFIG_SET_MEM_PARAM=y +CONFIG_DRAM_BASE=0x01000000 +CONFIG_DRAM_SIZE=0x00400000 +CONFIG_FLASH_MEM_BASE=0x01400000 +CONFIG_PROCESSOR_ID=0x14000040 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_BINFMT_FLAT=y +# CONFIG_SUSPEND is not set +# CONFIG_FW_LOADER is not set +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=y +CONFIG_BLK_DEV_RAM=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_ROMFS_FS=y +# CONFIG_ENABLE_MUST_CHECK is not set diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 019fb7c67dc..076db52ff67 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -193,6 +193,17 @@ CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_OMAP_LCD_VGA=y +CONFIG_OMAP2_DSS=m +CONFIG_OMAP2_DSS_RFBI=y +CONFIG_OMAP2_DSS_SDI=y +CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP2=m +CONFIG_PANEL_GENERIC_DPI=m +CONFIG_PANEL_SHARP_LS037V7DW01=m +CONFIG_PANEL_NEC_NL8048HL11_01B=m +CONFIG_PANEL_TAAL=m +CONFIG_PANEL_TPO_TD043MTEA1=m +CONFIG_PANEL_ACX565AKM=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 7a9267e5da5..8845f1c9925 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -21,6 +21,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y CONFIG_MACH_HARMONY=y +CONFIG_MACH_KAEN=y +CONFIG_MACH_PAZ00=y +CONFIG_MACH_TRIMSLICE=y +CONFIG_MACH_WARIO=y CONFIG_TEGRA_DEBUG_UARTD=y CONFIG_ARM_ERRATA_742230=y CONFIG_NO_HZ=y @@ -40,6 +44,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_INET_ESP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -66,7 +74,7 @@ CONFIG_APDS9802ALS=y CONFIG_ISL29003=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -# CONFIG_NETDEV_1000 is not set +CONFIG_R8169=y # CONFIG_NETDEV_10000 is not set # CONFIG_WLAN is not set # CONFIG_INPUT is not set @@ -78,12 +86,23 @@ CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set +# CONFIG_I2C_COMPAT is not set +# CONFIG_I2C_HELPER_AUTO is not set +CONFIG_I2C_TEGRA=y +CONFIG_SENSORS_LM90=y +CONFIG_MFD_TPS6586X=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_TPS6586X=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +CONFIG_IIO=y +CONFIG_SENSORS_ISL29018=y +CONFIG_SENSORS_AK8975=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -95,6 +114,10 @@ CONFIG_EXT3_FS_SECURITY=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index af54ed102f5..6b7403fd8f5 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -287,41 +287,63 @@ static inline int fls(int x) #include <asm-generic/bitops/hweight.h> #include <asm-generic/bitops/lock.h> -/* - * Ext2 is defined to use little-endian byte ordering. - * These do not need to be atomic. - */ -#define ext2_set_bit(nr,p) \ - __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_set_bit_atomic(lock,nr,p) \ - test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_clear_bit(nr,p) \ - __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_clear_bit_atomic(lock,nr,p) \ - test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_test_bit(nr,p) \ - test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_find_first_zero_bit(p,sz) \ - _find_first_zero_bit_le(p,sz) -#define ext2_find_next_zero_bit(p,sz,off) \ - _find_next_zero_bit_le(p,sz,off) -#define ext2_find_next_bit(p, sz, off) \ - _find_next_bit_le(p, sz, off) +static inline void __set_bit_le(int nr, void *addr) +{ + __set_bit(WORD_BITOFF_TO_LE(nr), addr); +} + +static inline void __clear_bit_le(int nr, void *addr) +{ + __clear_bit(WORD_BITOFF_TO_LE(nr), addr); +} + +static inline int __test_and_set_bit_le(int nr, void *addr) +{ + return __test_and_set_bit(WORD_BITOFF_TO_LE(nr), addr); +} + +static inline int test_and_set_bit_le(int nr, void *addr) +{ + return test_and_set_bit(WORD_BITOFF_TO_LE(nr), addr); +} + +static inline int __test_and_clear_bit_le(int nr, void *addr) +{ + return __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), addr); +} + +static inline int test_and_clear_bit_le(int nr, void *addr) +{ + return test_and_clear_bit(WORD_BITOFF_TO_LE(nr), addr); +} + +static inline int test_bit_le(int nr, const void *addr) +{ + return test_bit(WORD_BITOFF_TO_LE(nr), addr); +} + +static inline int find_first_zero_bit_le(const void *p, unsigned size) +{ + return _find_first_zero_bit_le(p, size); +} + +static inline int find_next_zero_bit_le(const void *p, int size, int offset) +{ + return _find_next_zero_bit_le(p, size, offset); +} + +static inline int find_next_bit_le(const void *p, int size, int offset) +{ + return _find_next_bit_le(p, size, offset); +} /* - * Minix is defined to use little-endian byte ordering. - * These do not need to be atomic. + * Ext2 is defined to use little-endian byte ordering. */ -#define minix_set_bit(nr,p) \ - __set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_test_bit(nr,p) \ - test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_test_and_set_bit(nr,p) \ - __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_test_and_clear_bit(nr,p) \ - __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_find_first_zero_bit(p,sz) \ - _find_first_zero_bit_le(p,sz) +#define ext2_set_bit_atomic(lock, nr, p) \ + test_and_set_bit_le(nr, p) +#define ext2_clear_bit_atomic(lock, nr, p) \ + test_and_clear_bit_le(nr, p) #endif /* __KERNEL__ */ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index ed5bc9e05a4..cd4458f6417 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -2,6 +2,7 @@ #define __ASM_ARM_CPUTYPE_H #include <linux/stringify.h> +#include <linux/kernel.h> #define CPUID_ID 0 #define CPUID_CACHETYPE 1 diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h index ee5e03efc1b..3ad4c10d0d8 100644 --- a/arch/arm/include/asm/fpstate.h +++ b/arch/arm/include/asm/fpstate.h @@ -18,7 +18,7 @@ * VFP storage area has: * - FPEXC, FPSCR, FPINST and FPINST2. * - 16 or 32 double precision data registers - * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6) + * - an implementation-dependent word of state for FLDMX/FSTMX (pre-ARMv6) * * FPEXC will always be non-zero once the VFP has been used in this process. */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index c7afbc552c7..7e30874377e 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -126,7 +126,7 @@ #endif #if !defined(_CACHE) && !defined(MULTI_CACHE) -#error Unknown cache maintainence model +#error Unknown cache maintenance model #endif #ifndef MULTI_CACHE diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h index 0ec35d1698a..fbf71d75ec8 100644 --- a/arch/arm/include/asm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -10,8 +10,8 @@ * * This file provides the glue to stick the processor-specific bits * into the kernel in an efficient manner. The idea is to use branches - * when we're only targetting one class of TLB, or indirect calls - * when we're targetting multiple classes of TLBs. + * when we're only targeting one class of TLB, or indirect calls + * when we're targeting multiple classes of TLBs. */ #ifdef __KERNEL__ diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h index f35b86e68dd..e4a04e4e562 100644 --- a/arch/arm/include/asm/hardware/pl080.h +++ b/arch/arm/include/asm/hardware/pl080.h @@ -16,7 +16,7 @@ * make it not entierly compatible with the PL080 specification from * ARM. When in doubt, check the Samsung documentation first. * - * The Samsung defines are PL080S, and add an extra controll register, + * The Samsung defines are PL080S, and add an extra control register, * the ability to move more than 2^11 counts of data and some extra * OneNAND features. */ diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h index 5586b7c8ef6..a71b417b185 100644 --- a/arch/arm/include/asm/hw_irq.h +++ b/arch/arm/include/asm/hw_irq.h @@ -10,14 +10,6 @@ static inline void ack_bad_irq(int irq) irq_err_count++; } -/* - * Obsolete inline function for calling irq descriptor handlers. - */ -static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - desc->handle_irq(irq, desc); -} - void set_irq_flags(unsigned int irq, unsigned int flags); #define IRQF_VALID (1 << 0) diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h index bb8a19bd582..e46bdd0097e 100644 --- a/arch/arm/include/asm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -39,10 +39,13 @@ typedef u32 kprobe_opcode_t; struct kprobe; typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *); +typedef unsigned long (kprobe_check_cc)(unsigned long); + /* Architecture specific copy of original instruction. */ struct arch_specific_insn { kprobe_opcode_t *insn; kprobe_insn_handler_t *insn_handler; + kprobe_check_cc *insn_check_cc; }; struct prev_kprobe { diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h index 6bc63ab498c..080d74f8128 100644 --- a/arch/arm/include/asm/localtimer.h +++ b/arch/arm/include/asm/localtimer.h @@ -44,8 +44,14 @@ int local_timer_ack(void); /* * Setup a local timer interrupt for a CPU. */ -void local_timer_setup(struct clock_event_device *); +int local_timer_setup(struct clock_event_device *); +#else + +static inline int local_timer_setup(struct clock_event_device *evt) +{ + return -ENXIO; +} #endif #endif diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h index 833306ee9e7..ea297ac70bc 100644 --- a/arch/arm/include/asm/mach/udc_pxa2xx.h +++ b/arch/arm/include/asm/mach/udc_pxa2xx.h @@ -20,8 +20,6 @@ struct pxa2xx_udc_mach_info { * VBUS IRQ and omit the methods above. Store the GPIO number * here. Note that sometimes the signals go through inverters... */ - bool gpio_vbus_inverted; - int gpio_vbus; /* high == vbus present */ bool gpio_pullup_inverted; int gpio_pullup; /* high == pullup activated */ }; diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index 348d513afa9..d8387437ec5 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -21,6 +21,8 @@ #ifndef __ASM_OUTERCACHE_H #define __ASM_OUTERCACHE_H +#include <linux/types.h> + struct outer_cache_fns { void (*inv_range)(unsigned long, unsigned long); void (*clean_range)(unsigned long, unsigned long); @@ -38,17 +40,17 @@ struct outer_cache_fns { extern struct outer_cache_fns outer_cache; -static inline void outer_inv_range(unsigned long start, unsigned long end) +static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.inv_range) outer_cache.inv_range(start, end); } -static inline void outer_clean_range(unsigned long start, unsigned long end) +static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.clean_range) outer_cache.clean_range(start, end); } -static inline void outer_flush_range(unsigned long start, unsigned long end) +static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.flush_range) outer_cache.flush_range(start, end); @@ -74,11 +76,11 @@ static inline void outer_disable(void) #else -static inline void outer_inv_range(unsigned long start, unsigned long end) +static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) { } -static inline void outer_clean_range(unsigned long start, unsigned long end) +static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) { } -static inline void outer_flush_range(unsigned long start, unsigned long end) +static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { } static inline void outer_flush_all(void) { } static inline void outer_inv_all(void) { } diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index ebcb6432f45..5750704e027 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -301,6 +301,7 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; #define pgd_present(pgd) (1) #define pgd_clear(pgdp) do { } while (0) #define set_pgd(pgd,pgdp) do { } while (0) +#define set_pud(pud,pudp) do { } while (0) /* Find an entry in the second-level page table.. */ @@ -351,7 +352,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_unmap(pte) __pte_unmap(pte) #define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pfn_pte(pfn,prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot)) #define pte_page(pte) pfn_to_page(pte_pfn(pte)) #define mk_pte(page,prot) pfn_pte(page_to_pfn(page), prot) diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index da8b52ec49c..95176af3df8 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -195,7 +195,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } #define NR_BANKS 8 struct membank { - unsigned long start; + phys_addr_t start; unsigned long size; unsigned int highmem; }; diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 9a87823642d..832888d0c20 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -159,7 +159,7 @@ extern unsigned int user_debug; #include <mach/barriers.h> #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) #define mb() do { dsb(); outer_sync(); } while (0) -#define rmb() dmb() +#define rmb() dsb() #define wmb() mb() #else #include <asm/memory.h> @@ -249,7 +249,7 @@ do { \ * cache totally. This means that the cache becomes inconsistent, and, * since we use normal loads/stores as well, this is really bad. * Typically, this causes oopsen in filp_close, but could have other, - * more disasterous effects. There are two work-arounds: + * more disastrous effects. There are two work-arounds: * 1. Disable interrupts and emulate the atomic swap * 2. Clean the cache, perform atomic swap, flush the cache * diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h index c4391ba2035..1dc98067589 100644 --- a/arch/arm/include/asm/thread_notify.h +++ b/arch/arm/include/asm/thread_notify.h @@ -43,6 +43,7 @@ static inline void thread_notify(unsigned long rc, struct thread_info *thread) #define THREAD_NOTIFY_FLUSH 0 #define THREAD_NOTIFY_EXIT 1 #define THREAD_NOTIFY_SWITCH 2 +#define THREAD_NOTIFY_COPY 3 #endif #endif diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h index 345df01534a..48192ac3a23 100644 --- a/arch/arm/include/asm/types.h +++ b/arch/arm/include/asm/types.h @@ -16,15 +16,6 @@ typedef unsigned short umode_t; #define BITS_PER_LONG 32 -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; -typedef u32 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h index 47f023aa849..14749aec94b 100644 --- a/arch/arm/include/asm/ucontext.h +++ b/arch/arm/include/asm/ucontext.h @@ -47,7 +47,7 @@ struct crunch_sigframe { #endif #ifdef CONFIG_IWMMXT -/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */ +/* iwmmxt_area is 0x98 bytes long, preceded by 8 bytes of signature */ #define IWMMXT_MAGIC 0x12ef842a #define IWMMXT_STORAGE_SIZE (IWMMXT_SIZE + 8) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index c891eb76c0e..87dbe3e2197 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -396,6 +396,10 @@ #define __NR_fanotify_init (__NR_SYSCALL_BASE+367) #define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) #define __NR_prlimit64 (__NR_SYSCALL_BASE+369) +#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) +#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) +#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) +#define __NR_syncfs (__NR_SYSCALL_BASE+373) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 74554f1742d..8d95446150a 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o -obj-$(CONFIG_PM) += sleep.o +obj-$(CONFIG_PM_SLEEP) += sleep.o obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o smp_tlb.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index d86fcd44b22..e4ee050aad7 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -159,31 +159,6 @@ static void __devinit pci_fixup_dec21285(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_dec21285); /* - * Same as above. The PrPMC800 carrier board for the PrPMC1100 - * card maps the host-bridge @ 00:01:00 for some reason and it - * ends up getting scanned. Note that we only want to do this - * fixup when we find the IXP4xx on a PrPMC system, which is why - * we check the machine type. We could be running on a board - * with an IXP4xx target device and we don't want to kill the - * resources in that case. - */ -static void __devinit pci_fixup_prpmc1100(struct pci_dev *dev) -{ - int i; - - if (machine_is_prpmc1100()) { - dev->class &= 0xff; - dev->class |= PCI_CLASS_BRIDGE_HOST << 8; - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - dev->resource[i].flags = 0; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP4XX, pci_fixup_prpmc1100); - -/* * PCI IDE controllers use non-standard I/O port decoding, respect it. */ static void __devinit pci_fixup_ide_bases(struct pci_dev *dev) diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 5c26eccef99..7fbf28c35bb 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -379,6 +379,10 @@ CALL(sys_fanotify_init) CALL(sys_fanotify_mark) CALL(sys_prlimit64) +/* 370 */ CALL(sys_name_to_handle_at) + CALL(sys_open_by_handle_at) + CALL(sys_clock_adjtime) + CALL(sys_syncfs) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c index cd3b853a8a6..90c50d4b43f 100644 --- a/arch/arm/kernel/crash_dump.c +++ b/arch/arm/kernel/crash_dump.c @@ -18,9 +18,6 @@ #include <linux/uaccess.h> #include <linux/io.h> -/* stores the physical address of elf header of crash image */ -unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; - /** * copy_oldmem_page() - copy one page from old kernel memory * @pfn: page frame number to be copied diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index d2d983be096..bcd66e00bdb 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -25,7 +25,7 @@ .macro addruart, rp, rv .endm -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) .macro senduart, rd, rx mcr p14, 0, \rd, c0, c5, 0 @@ -49,23 +49,6 @@ 1002: .endm -#elif defined(CONFIG_CPU_V7) - - .macro senduart, rd, rx - mcr p14, 0, \rd, c0, c5, 0 - .endm - - .macro busyuart, rd, rx -busy: mrc p14, 0, pc, c0, c1, 0 - bcs busy - .endm - - .macro waituart, rd, rx -wait: mrc p14, 0, pc, c0, c1, 0 - bcs wait - - .endm - #elif defined(CONFIG_CPU_XSCALE) .macro senduart, rd, rx diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 2ad62df3773..d16500110ee 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -1043,8 +1043,8 @@ ecard_probe(int slot, card_type_t type) */ if (slot < 8) { ec->irq = 32 + slot; - set_irq_chip(ec->irq, &ecard_chip); - set_irq_handler(ec->irq, handle_level_irq); + irq_set_chip_and_handler(ec->irq, &ecard_chip, + handle_level_irq); set_irq_flags(ec->irq, IRQF_VALID); } @@ -1103,7 +1103,7 @@ static int __init ecard_init(void) irqhw = ecard_probeirqhw(); - set_irq_chained_handler(IRQ_EXPANSIONCARD, + irq_set_chained_handler(IRQ_EXPANSIONCARD, irqhw ? ecard_irqexp_handler : ecard_irq_handler); ecard_proc_init(); diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index d4a0da1e48f..9b05c6a0dce 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -40,15 +40,22 @@ EXPORT_SYMBOL(elf_check_arch); void elf_set_personality(const struct elf32_hdr *x) { unsigned int eflags = x->e_flags; - unsigned int personality = PER_LINUX_32BIT; + unsigned int personality = current->personality & ~PER_MASK; + + /* + * We only support Linux ELF executables, so always set the + * personality to LINUX. + */ + personality |= PER_LINUX; /* * APCS-26 is only valid for OABI executables */ - if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) { - if (eflags & EF_ARM_APCS_26) - personality = PER_LINUX; - } + if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN && + (eflags & EF_ARM_APCS_26)) + personality &= ~ADDR_LIMIT_32BIT; + else + personality |= ADDR_LIMIT_32BIT; set_personality(personality); diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 052b509e2d5..1bec8b5f22f 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -338,7 +338,7 @@ static struct miscdevice etb_miscdev = { .fops = &etb_fops, }; -static int __init etb_probe(struct amba_device *dev, const struct amba_id *id) +static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id) { struct tracectx *t = &tracer; int ret = 0; @@ -530,7 +530,7 @@ static ssize_t trace_mode_store(struct kobject *kobj, static struct kobj_attribute trace_mode_attr = __ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store); -static int __init etm_probe(struct amba_device *dev, const struct amba_id *id) +static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id) { struct tracectx *t = &tracer; int ret = 0; diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 44b84fe6e1b..87acc25d7a3 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -238,8 +238,8 @@ static int enable_monitor_mode(void) ARM_DBG_READ(c1, 0, dscr); /* Ensure that halting mode is disabled. */ - if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, "halting debug mode enabled." - "Unable to access hardware resources.")) { + if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, + "halting debug mode enabled. Unable to access hardware resources.\n")) { ret = -EPERM; goto out; } @@ -377,7 +377,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp) } } - if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) { + if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) { ret = -EBUSY; goto out; } @@ -423,7 +423,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) } } - if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) + if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) return; /* Reset the control register. */ @@ -635,7 +635,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) if (WARN_ONCE(!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps() || !bp->hw.bp_target), - "overflow handler required but none found")) { + "overflow handler required but none found\n")) { ret = -EINVAL; } out: @@ -868,6 +868,13 @@ static void reset_ctrl_regs(void *info) */ asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); isb(); + + /* + * Clear any configured vector-catch events before + * enabling monitor mode. + */ + asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); + isb(); } if (enable_monitor_mode()) @@ -936,8 +943,8 @@ static int __init arch_hw_breakpoint_init(void) ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { max_watchpoint_len = 4; - pr_warning("halting debug mode enabled. Assuming maximum " - "watchpoint size of %u bytes.", max_watchpoint_len); + pr_warning("halting debug mode enabled. Assuming maximum watchpoint size of %u bytes.\n", + max_watchpoint_len); } else { /* Work out the maximum supported watchpoint length. */ max_watchpoint_len = get_max_wp_len(); diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 3535d3793e6..83bbad03fcc 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -51,63 +51,18 @@ unsigned long irq_err_count; -int show_interrupts(struct seq_file *p, void *v) +int arch_show_interrupts(struct seq_file *p, int prec) { - int i = *(loff_t *) v, cpu; - struct irq_desc *desc; - struct irqaction * action; - unsigned long flags; - int prec, n; - - for (prec = 3, n = 1000; prec < 10 && n <= nr_irqs; prec++) - n *= 10; - -#ifdef CONFIG_SMP - if (prec < 4) - prec = 4; -#endif - - if (i == 0) { - char cpuname[12]; - - seq_printf(p, "%*s ", prec, ""); - for_each_present_cpu(cpu) { - sprintf(cpuname, "CPU%d", cpu); - seq_printf(p, " %10s", cpuname); - } - seq_putc(p, '\n'); - } - - if (i < nr_irqs) { - desc = irq_to_desc(i); - raw_spin_lock_irqsave(&desc->lock, flags); - action = desc->action; - if (!action) - goto unlock; - - seq_printf(p, "%*d: ", prec, i); - for_each_present_cpu(cpu) - seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu)); - seq_printf(p, " %10s", desc->irq_data.chip->name ? : "-"); - seq_printf(p, " %s", action->name); - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - - seq_putc(p, '\n'); -unlock: - raw_spin_unlock_irqrestore(&desc->lock, flags); - } else if (i == nr_irqs) { #ifdef CONFIG_FIQ - show_fiq_list(p, prec); + show_fiq_list(p, prec); #endif #ifdef CONFIG_SMP - show_ipi_list(p, prec); + show_ipi_list(p, prec); #endif #ifdef CONFIG_LOCAL_TIMERS - show_local_irqs(p, prec); + show_local_irqs(p, prec); #endif - seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count); - } + seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count); return 0; } @@ -144,24 +99,21 @@ asm_do_IRQ(unsigned int irq, struct pt_regs *regs) void set_irq_flags(unsigned int irq, unsigned int iflags) { - struct irq_desc *desc; - unsigned long flags; + unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; if (irq >= nr_irqs) { printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq); return; } - desc = irq_to_desc(irq); - raw_spin_lock_irqsave(&desc->lock, flags); - desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; if (iflags & IRQF_VALID) - desc->status &= ~IRQ_NOREQUEST; + clr |= IRQ_NOREQUEST; if (iflags & IRQF_PROBE) - desc->status &= ~IRQ_NOPROBE; + clr |= IRQ_NOPROBE; if (!(iflags & IRQF_NOAUTOEN)) - desc->status &= ~IRQ_NOAUTOEN; - raw_spin_unlock_irqrestore(&desc->lock, flags); + clr |= IRQ_NOAUTOEN; + /* Order is clear bits in "clr" then set bits in "set" */ + irq_modify_status(irq, clr, set & ~clr); } void __init init_IRQ(void) diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 8f6ed43861f..15eeff6aea0 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -34,9 +34,6 @@ * * *) If the PC is written to by the instruction, the * instruction must be fully simulated in software. - * If it is a conditional instruction, the handler - * will use insn[0] to copy its condition code to - * set r0 to 1 and insn[1] to "mov pc, lr" to return. * * *) Otherwise, a modified form of the instruction is * directly executed. Its handler calls the @@ -68,13 +65,17 @@ #define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25) +#define is_r15(insn, bitpos) (((insn) & (0xf << bitpos)) == (0xf << bitpos)) + +/* + * Test if load/store instructions writeback the address register. + * if P (bit 24) == 0 or W (bit 21) == 1 + */ +#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000) + #define PSR_fs (PSR_f|PSR_s) #define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */ -#define SET_R0_TRUE_INSTRUCTION 0xe3a00001 /* mov r0, #1 */ - -#define truecc_insn(insn) (((insn) & 0xf0000000) | \ - (SET_R0_TRUE_INSTRUCTION & 0x0fffffff)) typedef long (insn_0arg_fn_t)(void); typedef long (insn_1arg_fn_t)(long); @@ -419,14 +420,10 @@ insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr, static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; long iaddr = (long)p->addr; int disp = branch_displacement(insn); - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - if (insn & (1 << 24)) regs->ARM_lr = iaddr + 4; @@ -446,14 +443,10 @@ static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs) static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; int rm = insn & 0xf; long rmv = regs->uregs[rm]; - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - if (insn & (1 << 5)) regs->ARM_lr = (long)p->addr + 4; @@ -463,9 +456,16 @@ static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs) regs->ARM_cpsr |= PSR_T_BIT; } +static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + unsigned long mask = 0xf8ff03df; /* Mask out execution state */ + regs->uregs[rd] = regs->ARM_cpsr & mask; +} + static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; int rn = (insn >> 16) & 0xf; int lbit = insn & (1 << 20); @@ -476,9 +476,6 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) int reg_bit_vector; int reg_count; - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - reg_count = 0; reg_bit_vector = insn & 0xffff; while (reg_bit_vector) { @@ -510,11 +507,6 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - regs->ARM_pc = (long)p->addr + str_pc_offset; simulate_ldm1stm1(p, regs); regs->ARM_pc = (long)p->addr + 4; @@ -525,24 +517,16 @@ static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs) regs->uregs[12] = regs->uregs[13]; } -static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs) -{ - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rn = (insn >> 16) & 0xf; - long rnv = regs->uregs[rn]; - - /* Save Rn in case of writeback. */ - regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); -} - static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs) { insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; int rd = (insn >> 12) & 0xf; int rn = (insn >> 16) & 0xf; int rm = insn & 0xf; /* rm may be invalid, don't care. */ + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; /* Not following the C calling convention here, so need asm(). */ __asm__ __volatile__ ( @@ -554,29 +538,36 @@ static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs) "str r0, %[rn] \n\t" /* in case of writeback */ "str r2, %[rd0] \n\t" "str r3, %[rd1] \n\t" - : [rn] "+m" (regs->uregs[rn]), + : [rn] "+m" (rnv), [rd0] "=m" (regs->uregs[rd]), [rd1] "=m" (regs->uregs[rd+1]) - : [rm] "m" (regs->uregs[rm]), + : [rm] "m" (rmv), [cpsr] "r" (regs->ARM_cpsr), [i_fn] "r" (i_fn) : "r0", "r1", "r2", "r3", "lr", "cc" ); + if (is_writeback(insn)) + regs->uregs[rn] = rnv; } static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs) { insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; int rd = (insn >> 12) & 0xf; int rn = (insn >> 16) & 0xf; int rm = insn & 0xf; - long rnv = regs->uregs[rn]; - long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; + /* rm/rmv may be invalid, don't care. */ + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rnv_wb; - regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd], + rnv_wb = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd], regs->uregs[rd+1], regs->ARM_cpsr, i_fn); + if (is_writeback(insn)) + regs->uregs[rn] = rnv_wb; } static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs) @@ -594,7 +585,8 @@ static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs) long cpsr = regs->ARM_cpsr; fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn); - regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */ + if (rn != 15) + regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */ rdv = fnr.r1; if (rd == 15) { @@ -622,35 +614,11 @@ static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs) long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd]; long rnv = (rn == 15) ? iaddr + 8 : regs->uregs[rn]; long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + long rnv_wb; - /* Save Rn in case of writeback. */ - regs->uregs[rn] = - insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn); -} - -static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs) -{ - insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - union reg_pair fnr; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - - fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn); - regs->uregs[rn] = fnr.r0; - regs->uregs[rd] = fnr.r1; -} - -static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs) -{ - insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - long rnv = regs->uregs[rn]; - long rdv = regs->uregs[rd]; - - insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn); + rnv_wb = insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn); + if (rn != 15) + regs->uregs[rn] = rnv_wb; /* Save Rn in case of writeback. */ } static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs) @@ -686,32 +654,32 @@ static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs) insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); } -static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs) +static void __kprobes emulate_nop(struct kprobe *p, struct pt_regs *regs) { - insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - - regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); } -static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs) +static void __kprobes +emulate_rd12_modify(struct kprobe *p, struct pt_regs *regs) { insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; - int ird = (insn >> 12) & 0xf; + int rd = (insn >> 12) & 0xf; + long rdv = regs->uregs[rd]; - insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn); + regs->uregs[rd] = insnslot_1arg_rflags(rdv, regs->ARM_cpsr, i_fn); } -static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs) +static void __kprobes +emulate_rd12rn0_modify(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; - int rn = (insn >> 16) & 0xf; + int rd = (insn >> 12) & 0xf; + int rn = insn & 0xf; + long rdv = regs->uregs[rd]; long rnv = regs->uregs[rn]; - insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); + regs->uregs[rd] = insnslot_2arg_rflags(rdv, rnv, regs->ARM_cpsr, i_fn); } static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs) @@ -817,6 +785,17 @@ emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs) } static void __kprobes +emulate_alu_tests_imm(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rn = (insn >> 16) & 0xf; + long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn]; + + insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs) { insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; @@ -852,14 +831,34 @@ emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs) insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn); } +static void __kprobes +emulate_alu_tests(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; + int rn = (insn >> 16) & 0xf; + int rs = (insn >> 8) & 0xf; /* rs/rsv may be invalid, don't care. */ + int rm = insn & 0xf; + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rsv = regs->uregs[rs]; + + insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn); +} + static enum kprobe_insn __kprobes prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi) { - int ibit = (insn & (1 << 26)) ? 25 : 22; + int not_imm = (insn & (1 << 26)) ? (insn & (1 << 25)) + : (~insn & (1 << 22)); + + if (is_writeback(insn) && is_r15(insn, 16)) + return INSN_REJECTED; /* Writeback to PC */ insn &= 0xfff00fff; insn |= 0x00001000; /* Rn = r0, Rd = r1 */ - if (insn & (1 << ibit)) { + if (not_imm) { insn &= ~0xf; insn |= 2; /* Rm = r2 */ } @@ -869,20 +868,40 @@ prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi) } static enum kprobe_insn __kprobes -prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi) +prep_emulate_rd12_modify(kprobe_opcode_t insn, struct arch_specific_insn *asi) { - insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + + insn &= 0xffff0fff; /* Rd = r0 */ asi->insn[0] = insn; - asi->insn_handler = emulate_rd12rm0; + asi->insn_handler = emulate_rd12_modify; return INSN_GOOD; } static enum kprobe_insn __kprobes -prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi) +prep_emulate_rd12rn0_modify(kprobe_opcode_t insn, + struct arch_specific_insn *asi) { - insn &= 0xffff0fff; /* Rd = r0 */ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + + insn &= 0xffff0ff0; /* Rd = r0 */ + insn |= 0x00000001; /* Rn = r1 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd12rn0_modify; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + + insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ asi->insn[0] = insn; - asi->insn_handler = emulate_rd12; + asi->insn_handler = emulate_rd12rm0; return INSN_GOOD; } @@ -890,6 +909,9 @@ static enum kprobe_insn __kprobes prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ insn |= 0x00000001; /* Rm = r1 */ asi->insn[0] = insn; @@ -901,6 +923,9 @@ static enum kprobe_insn __kprobes prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 16)) + return INSN_REJECTED; /* Rd is PC */ + insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */ insn |= 0x00000001; /* Rm = r1 */ asi->insn[0] = insn; @@ -912,6 +937,9 @@ static enum kprobe_insn __kprobes prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 16)) + return INSN_REJECTED; /* Rd is PC */ + insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */ insn |= 0x00000102; /* Rs = r1, Rm = r2 */ asi->insn[0] = insn; @@ -923,6 +951,9 @@ static enum kprobe_insn __kprobes prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 16) || is_r15(insn, 12)) + return INSN_REJECTED; /* RdHi or RdLo is PC */ + insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */ insn |= 0x00001203; /* Rs = r2, Rm = r3 */ asi->insn[0] = insn; @@ -943,20 +974,13 @@ prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn, static enum kprobe_insn __kprobes space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi) { - /* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */ - /* RFE : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */ - /* SRS : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */ - if ((insn & 0xfff30020) == 0xf1020000 || - (insn & 0xfe500f00) == 0xf8100a00 || - (insn & 0xfe5f0f00) == 0xf84d0500) - return INSN_REJECTED; - - /* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */ - if ((insn & 0xfd700000) == 0xf4500000) { - insn &= 0xfff0ffff; /* Rn = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_rn16; - return INSN_GOOD; + /* memory hint : 1111 0100 x001 xxxx xxxx xxxx xxxx xxxx : */ + /* PLDI : 1111 0100 x101 xxxx xxxx xxxx xxxx xxxx : */ + /* PLDW : 1111 0101 x001 xxxx xxxx xxxx xxxx xxxx : */ + /* PLD : 1111 0101 x101 xxxx xxxx xxxx xxxx xxxx : */ + if ((insn & 0xfe300000) == 0xf4100000) { + asi->insn_handler = emulate_nop; + return INSN_GOOD_NO_SLOT; } /* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */ @@ -965,41 +989,22 @@ space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi) return INSN_GOOD_NO_SLOT; } - /* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */ - /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ - if ((insn & 0xffff00f0) == 0xf1010000 || - (insn & 0xff000010) == 0xfe000000) { - asi->insn[0] = insn; - asi->insn_handler = emulate_none; - return INSN_GOOD; - } + /* CPS : 1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */ + /* SETEND: 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */ + + /* SRS : 1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */ + /* RFE : 1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ + /* Coprocessor instructions... */ /* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ /* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ - if ((insn & 0xffe00000) == 0xfc400000) { - insn &= 0xfff00fff; /* Rn = r0 */ - insn |= 0x00001000; /* Rd = r1 */ - asi->insn[0] = insn; - asi->insn_handler = - (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr; - return INSN_GOOD; - } + /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ - /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ - if ((insn & 0xfe000000) == 0xfc000000) { - insn &= 0xfff0ffff; /* Rn = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_ldcstc; - return INSN_GOOD; - } - - /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ - /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - insn &= 0xffff0fff; /* Rd = r0 */ - asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12; - return INSN_GOOD; + return INSN_REJECTED; } static enum kprobe_insn __kprobes @@ -1008,19 +1013,18 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */ if ((insn & 0x0f900010) == 0x01000000) { - /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */ - /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */ - if ((insn & 0x0ff000f0) == 0x01200020 || - (insn & 0x0fb000f0) == 0x01200000) - return INSN_REJECTED; - - /* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */ - if ((insn & 0x0fb00010) == 0x01000000) - return prep_emulate_rd12(insn, asi); + /* MRS cpsr : cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */ + if ((insn & 0x0ff000f0) == 0x01000000) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + asi->insn_handler = simulate_mrs; + return INSN_GOOD_NO_SLOT; + } /* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */ if ((insn & 0x0ff00090) == 0x01400080) - return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, + asi); /* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */ /* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */ @@ -1029,24 +1033,29 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) return prep_emulate_rd16rs8rm0_wflags(insn, asi); /* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */ - /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */ - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx : Q */ + if ((insn & 0x0ff00090) == 0x01000080 || + (insn & 0x0ff000b0) == 0x01200080) + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */ + /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */ + /* MRS spsr : cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */ + + /* Other instruction encodings aren't yet defined */ + return INSN_REJECTED; } /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */ else if ((insn & 0x0f900090) == 0x01000010) { - /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ - if ((insn & 0xfff000f0) == 0xe1200070) - return INSN_REJECTED; - /* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */ /* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */ if ((insn & 0x0ff000d0) == 0x01200010) { - asi->insn[0] = truecc_insn(insn); + if ((insn & 0x0ff000ff) == 0x0120003f) + return INSN_REJECTED; /* BLX pc */ asi->insn_handler = simulate_blx2bx; - return INSN_GOOD; + return INSN_GOOD_NO_SLOT; } /* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */ @@ -1057,17 +1066,27 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */ /* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */ /* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */ - return prep_emulate_rd12rn16rm0_wflags(insn, asi); + if ((insn & 0x0f9000f0) == 0x01000050) + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + + /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ + /* SMC : cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */ + + /* Other instruction encodings aren't yet defined */ + return INSN_REJECTED; } /* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */ - else if ((insn & 0x0f000090) == 0x00000090) { + else if ((insn & 0x0f0000f0) == 0x00000090) { /* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */ /* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */ /* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */ /* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */ /* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */ + /* undef : cccc 0000 0101 xxxx xxxx xxxx 1001 xxxx : */ + /* MLS : cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx : */ + /* undef : cccc 0000 0111 xxxx xxxx xxxx 1001 xxxx : */ /* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */ /* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */ /* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */ @@ -1076,13 +1095,15 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */ /* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */ /* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */ - if ((insn & 0x0fe000f0) == 0x00000090) { - return prep_emulate_rd16rs8rm0_wflags(insn, asi); - } else if ((insn & 0x0fe000f0) == 0x00200090) { - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - } else { - return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); - } + if ((insn & 0x00d00000) == 0x00500000) + return INSN_REJECTED; + else if ((insn & 0x00e00000) == 0x00000000) + return prep_emulate_rd16rs8rm0_wflags(insn, asi); + else if ((insn & 0x00a00000) == 0x00200000) + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + else + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, + asi); } /* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */ @@ -1090,23 +1111,45 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */ /* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */ - /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */ - /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */ + /* ??? : cccc 0001 0x01 xxxx xxxx xxxx 1001 xxxx */ + /* ??? : cccc 0001 0x10 xxxx xxxx xxxx 1001 xxxx */ + /* ??? : cccc 0001 0x11 xxxx xxxx xxxx 1001 xxxx */ /* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */ /* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */ + /* STREXD: cccc 0001 1010 xxxx xxxx xxxx 1001 xxxx */ + /* LDREXD: cccc 0001 1011 xxxx xxxx xxxx 1001 xxxx */ + /* STREXB: cccc 0001 1100 xxxx xxxx xxxx 1001 xxxx */ + /* LDREXB: cccc 0001 1101 xxxx xxxx xxxx 1001 xxxx */ + /* STREXH: cccc 0001 1110 xxxx xxxx xxxx 1001 xxxx */ + /* LDREXH: cccc 0001 1111 xxxx xxxx xxxx 1001 xxxx */ + + /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */ + /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */ /* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */ /* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */ /* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */ /* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */ - if ((insn & 0x0fb000f0) == 0x01000090) { - /* SWP/SWPB */ - return prep_emulate_rd12rn16rm0_wflags(insn, asi); + if ((insn & 0x0f0000f0) == 0x01000090) { + if ((insn & 0x0fb000f0) == 0x01000090) { + /* SWP/SWPB */ + return prep_emulate_rd12rn16rm0_wflags(insn, + asi); + } else { + /* STREX/LDREX variants and unallocaed space */ + return INSN_REJECTED; + } + } else if ((insn & 0x0e1000d0) == 0x00000d0) { /* STRD/LDRD */ + if ((insn & 0x0000e000) == 0x0000e000) + return INSN_REJECTED; /* Rd is LR or PC */ + if (is_writeback(insn) && is_r15(insn, 16)) + return INSN_REJECTED; /* Writeback to PC */ + insn &= 0xfff00fff; insn |= 0x00002000; /* Rn = r0, Rd = r2 */ - if (insn & (1 << 22)) { - /* I bit */ + if (!(insn & (1 << 22))) { + /* Register index */ insn &= ~0xf; insn |= 1; /* Rm = r1 */ } @@ -1116,6 +1159,9 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) return INSN_GOOD; } + /* LDRH/STRH/LDRSB/LDRSH */ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ return prep_emulate_ldr_str(insn, asi); } @@ -1123,7 +1169,7 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* * ALU op with S bit and Rd == 15 : - * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx + * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx */ if ((insn & 0x0e10f000) == 0x0010f000) return INSN_REJECTED; @@ -1152,22 +1198,61 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) insn |= 0x00000200; /* Rs = r2 */ } asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ + + if ((insn & 0x0f900000) == 0x01100000) { + /* + * TST : cccc 0001 0001 xxxx xxxx xxxx xxxx xxxx + * TEQ : cccc 0001 0011 xxxx xxxx xxxx xxxx xxxx + * CMP : cccc 0001 0101 xxxx xxxx xxxx xxxx xxxx + * CMN : cccc 0001 0111 xxxx xxxx xxxx xxxx xxxx + */ + asi->insn_handler = emulate_alu_tests; + } else { + /* ALU ops which write to Rd */ + asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_rwflags : emulate_alu_rflags; + } return INSN_GOOD; } static enum kprobe_insn __kprobes space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + /* MOVW : cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */ + /* MOVT : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */ + if ((insn & 0x0fb00000) == 0x03000000) + return prep_emulate_rd12_modify(insn, asi); + + /* hints : cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */ + if ((insn & 0x0fff0000) == 0x03200000) { + unsigned op2 = insn & 0x000000ff; + if (op2 == 0x01 || op2 == 0x04) { + /* YIELD : cccc 0011 0010 0000 xxxx xxxx 0000 0001 */ + /* SEV : cccc 0011 0010 0000 xxxx xxxx 0000 0100 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_none; + return INSN_GOOD; + } else if (op2 <= 0x03) { + /* NOP : cccc 0011 0010 0000 xxxx xxxx 0000 0000 */ + /* WFE : cccc 0011 0010 0000 xxxx xxxx 0000 0010 */ + /* WFI : cccc 0011 0010 0000 xxxx xxxx 0000 0011 */ + /* + * We make WFE and WFI true NOPs to avoid stalls due + * to missing events whilst processing the probe. + */ + asi->insn_handler = emulate_nop; + return INSN_GOOD_NO_SLOT; + } + /* For DBG and unallocated hints it's safest to reject them */ + return INSN_REJECTED; + } + /* * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx - * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx * ALU op with S bit and Rd == 15 : * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */ if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */ - (insn & 0x0ff00000) == 0x03400000 || /* Undef */ (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */ return INSN_REJECTED; @@ -1178,10 +1263,22 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) * *S (bit 20) updates condition codes * ADC/SBC/RSC reads the C flag */ - insn &= 0xffff0fff; /* Rd = r0 */ + insn &= 0xfff00fff; /* Rn = r0 and Rd = r0 */ asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ + + if ((insn & 0x0f900000) == 0x03100000) { + /* + * TST : cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx + * TEQ : cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx + * CMP : cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx + * CMN : cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx + */ + asi->insn_handler = emulate_alu_tests_imm; + } else { + /* ALU ops which write to Rd */ + asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_imm_rwflags : emulate_alu_imm_rflags; + } return INSN_GOOD; } @@ -1190,6 +1287,8 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) { /* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */ if ((insn & 0x0ff000f0) == 0x068000b0) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ insn |= 0x00000001; /* Rm = r1 */ asi->insn[0] = insn; @@ -1203,6 +1302,8 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */ if ((insn & 0x0fa00030) == 0x06a00010 || (insn & 0x0fb000f0) == 0x06a00030) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ asi->insn[0] = insn; asi->insn_handler = emulate_sat; @@ -1211,57 +1312,101 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */ /* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */ + /* RBIT : cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */ /* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */ if ((insn & 0x0ff00070) == 0x06b00030 || - (insn & 0x0ff000f0) == 0x06f000b0) + (insn & 0x0ff00070) == 0x06f00030) return prep_emulate_rd12rm0(insn, asi); + /* ??? : cccc 0110 0000 xxxx xxxx xxxx xxx1 xxxx : */ /* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */ /* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */ /* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */ /* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */ /* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */ + /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1101 xxxx : */ /* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */ /* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */ /* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */ /* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */ /* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */ /* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1101 xxxx : */ /* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */ /* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */ /* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */ /* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */ /* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */ /* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1101 xxxx : */ /* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */ + /* ??? : cccc 0110 0100 xxxx xxxx xxxx xxx1 xxxx : */ /* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */ /* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */ /* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */ /* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */ /* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */ + /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1101 xxxx : */ /* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */ /* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */ /* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */ /* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */ /* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */ /* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1101 xxxx : */ /* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */ /* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */ /* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */ /* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */ /* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */ /* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1101 xxxx : */ /* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */ + if ((insn & 0x0f800010) == 0x06000010) { + if ((insn & 0x00300000) == 0x00000000 || + (insn & 0x000000e0) == 0x000000a0 || + (insn & 0x000000e0) == 0x000000c0) + return INSN_REJECTED; /* Unallocated space */ + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + } + /* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */ /* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */ + if ((insn & 0x0ff00030) == 0x06800010) + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + /* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */ - /* SXTB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTB16 : cccc 0110 1000 1111 xxxx xxxx 0111 xxxx : */ + /* ??? : cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx : */ /* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTB : cccc 0110 1010 1111 xxxx xxxx 0111 xxxx : */ /* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTH : cccc 0110 1011 1111 xxxx xxxx 0111 xxxx : */ /* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTB16 : cccc 0110 1100 1111 xxxx xxxx 0111 xxxx : */ + /* ??? : cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx : */ /* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTB : cccc 0110 1110 1111 xxxx xxxx 0111 xxxx : */ /* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */ - return prep_emulate_rd12rn16rm0_wflags(insn, asi); + /* UXTH : cccc 0110 1111 1111 xxxx xxxx 0111 xxxx : */ + if ((insn & 0x0f8000f0) == 0x06800070) { + if ((insn & 0x00300000) == 0x00100000) + return INSN_REJECTED; /* Unallocated space */ + + if ((insn & 0x000f0000) == 0x000f0000) + return prep_emulate_rd12rm0(insn, asi); + else + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + } + + /* Other instruction encodings aren't yet defined */ + return INSN_REJECTED; } static enum kprobe_insn __kprobes @@ -1271,29 +1416,49 @@ space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) if ((insn & 0x0ff000f0) == 0x03f000f0) return INSN_REJECTED; - /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */ - /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */ - if ((insn & 0x0ff000f0) == 0x07800010) - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - /* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */ /* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */ if ((insn & 0x0ff00090) == 0x07400010) return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); /* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */ + /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */ /* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */ + /* SMUSD : cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx : */ /* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */ - /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */ + /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */ + /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx : */ + /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx : */ if ((insn & 0x0ff00090) == 0x07000010 || (insn & 0x0ff000d0) == 0x07500010 || - (insn & 0x0ff000d0) == 0x075000d0) + (insn & 0x0ff000f0) == 0x07800010) { + + if ((insn & 0x0000f000) == 0x0000f000) + return prep_emulate_rd16rs8rm0_wflags(insn, asi); + else + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + } + + /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */ + if ((insn & 0x0ff000d0) == 0x075000d0) return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - /* SMUSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx : */ - /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */ - /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */ - return prep_emulate_rd16rs8rm0_wflags(insn, asi); + /* SBFX : cccc 0111 101x xxxx xxxx xxxx x101 xxxx : */ + /* UBFX : cccc 0111 111x xxxx xxxx xxxx x101 xxxx : */ + if ((insn & 0x0fa00070) == 0x07a00050) + return prep_emulate_rd12rm0(insn, asi); + + /* BFI : cccc 0111 110x xxxx xxxx xxxx x001 xxxx : */ + /* BFC : cccc 0111 110x xxxx xxxx xxxx x001 1111 : */ + if ((insn & 0x0fe00070) == 0x07c00010) { + + if ((insn & 0x0000000f) == 0x0000000f) + return prep_emulate_rd12_modify(insn, asi); + else + return prep_emulate_rd12rn0_modify(insn, asi); + } + + return INSN_REJECTED; } static enum kprobe_insn __kprobes @@ -1307,6 +1472,10 @@ space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */ /* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */ /* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */ + + if ((insn & 0x00500000) == 0x00500000 && is_r15(insn, 12)) + return INSN_REJECTED; /* LDRB into PC */ + return prep_emulate_ldr_str(insn, asi); } @@ -1321,10 +1490,9 @@ space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ /* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */ - asi->insn[0] = truecc_insn(insn); asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */ simulate_stm1_pc : simulate_ldm1stm1; - return INSN_GOOD; + return INSN_GOOD_NO_SLOT; } static enum kprobe_insn __kprobes @@ -1332,58 +1500,117 @@ space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi) { /* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */ /* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */ - asi->insn[0] = truecc_insn(insn); asi->insn_handler = simulate_bbl; - return INSN_GOOD; + return INSN_GOOD_NO_SLOT; } static enum kprobe_insn __kprobes -space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +space_cccc_11xx(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + /* Coprocessor instructions... */ /* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ /* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ - insn &= 0xfff00fff; - insn |= 0x00001000; /* Rn = r0, Rd = r1 */ - asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr; - return INSN_GOOD; + /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ + + /* SVC : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */ + + return INSN_REJECTED; } -static enum kprobe_insn __kprobes -space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +static unsigned long __kprobes __check_eq(unsigned long cpsr) { - /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ - /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ - insn &= 0xfff0ffff; /* Rn = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_ldcstc; - return INSN_GOOD; + return cpsr & PSR_Z_BIT; } -static enum kprobe_insn __kprobes -space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +static unsigned long __kprobes __check_ne(unsigned long cpsr) { - /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ - /* SWI : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */ - if ((insn & 0xfff000f0) == 0xe1200070 || - (insn & 0x0f000000) == 0x0f000000) - return INSN_REJECTED; + return (~cpsr) & PSR_Z_BIT; +} - /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ - if ((insn & 0x0f000010) == 0x0e000000) { - asi->insn[0] = insn; - asi->insn_handler = emulate_none; - return INSN_GOOD; - } +static unsigned long __kprobes __check_cs(unsigned long cpsr) +{ + return cpsr & PSR_C_BIT; +} - /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ - /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - insn &= 0xffff0fff; /* Rd = r0 */ - asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12; - return INSN_GOOD; +static unsigned long __kprobes __check_cc(unsigned long cpsr) +{ + return (~cpsr) & PSR_C_BIT; } +static unsigned long __kprobes __check_mi(unsigned long cpsr) +{ + return cpsr & PSR_N_BIT; +} + +static unsigned long __kprobes __check_pl(unsigned long cpsr) +{ + return (~cpsr) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_vs(unsigned long cpsr) +{ + return cpsr & PSR_V_BIT; +} + +static unsigned long __kprobes __check_vc(unsigned long cpsr) +{ + return (~cpsr) & PSR_V_BIT; +} + +static unsigned long __kprobes __check_hi(unsigned long cpsr) +{ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return cpsr & PSR_C_BIT; +} + +static unsigned long __kprobes __check_ls(unsigned long cpsr) +{ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return (~cpsr) & PSR_C_BIT; +} + +static unsigned long __kprobes __check_ge(unsigned long cpsr) +{ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return (~cpsr) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_lt(unsigned long cpsr) +{ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return cpsr & PSR_N_BIT; +} + +static unsigned long __kprobes __check_gt(unsigned long cpsr) +{ + unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return (~temp) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_le(unsigned long cpsr) +{ + unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return temp & PSR_N_BIT; +} + +static unsigned long __kprobes __check_al(unsigned long cpsr) +{ + return true; +} + +static kprobe_check_cc * const condition_checks[16] = { + &__check_eq, &__check_ne, &__check_cs, &__check_cc, + &__check_mi, &__check_pl, &__check_vs, &__check_vc, + &__check_hi, &__check_ls, &__check_ge, &__check_lt, + &__check_gt, &__check_le, &__check_al, &__check_al +}; + /* Return: * INSN_REJECTED If instruction is one not allowed to kprobe, * INSN_GOOD If instruction is supported and uses instruction slot, @@ -1399,133 +1626,45 @@ space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi) enum kprobe_insn __kprobes arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + asi->insn_check_cc = condition_checks[insn>>28]; asi->insn[1] = KPROBE_RETURN_INSTRUCTION; - if ((insn & 0xf0000000) == 0xf0000000) { + if ((insn & 0xf0000000) == 0xf0000000) return space_1111(insn, asi); - } else if ((insn & 0x0e000000) == 0x00000000) { + else if ((insn & 0x0e000000) == 0x00000000) return space_cccc_000x(insn, asi); - } else if ((insn & 0x0e000000) == 0x02000000) { + else if ((insn & 0x0e000000) == 0x02000000) return space_cccc_001x(insn, asi); - } else if ((insn & 0x0f000010) == 0x06000010) { + else if ((insn & 0x0f000010) == 0x06000010) return space_cccc_0110__1(insn, asi); - } else if ((insn & 0x0f000010) == 0x07000010) { + else if ((insn & 0x0f000010) == 0x07000010) return space_cccc_0111__1(insn, asi); - } else if ((insn & 0x0c000000) == 0x04000000) { + else if ((insn & 0x0c000000) == 0x04000000) return space_cccc_01xx(insn, asi); - } else if ((insn & 0x0e000000) == 0x08000000) { + else if ((insn & 0x0e000000) == 0x08000000) return space_cccc_100x(insn, asi); - } else if ((insn & 0x0e000000) == 0x0a000000) { + else if ((insn & 0x0e000000) == 0x0a000000) return space_cccc_101x(insn, asi); - } else if ((insn & 0x0fe00000) == 0x0c400000) { - - return space_cccc_1100_010x(insn, asi); - - } else if ((insn & 0x0e000000) == 0x0c000000) { - - return space_cccc_110x(insn, asi); - - } - - return space_cccc_111x(insn, asi); + return space_cccc_11xx(insn, asi); } void __init arm_kprobe_decode_init(void) { find_str_pc_offset(); } - - -/* - * All ARM instructions listed below. - * - * Instructions and their general purpose registers are given. - * If a particular register may not use R15, it is prefixed with a "!". - * If marked with a "*" means the value returned by reading R15 - * is implementation defined. - * - * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ - * TST: Rd, Rn, Rm, !Rs - * BX: Rm - * BLX(2): !Rm - * BX: Rm (R15 legal, but discouraged) - * BXJ: !Rm, - * CLZ: !Rd, !Rm - * CPY: Rd, Rm - * LDC/2,STC/2 immediate offset & unindex: Rn - * LDC/2,STC/2 immediate pre/post-indexed: !Rn - * LDM(1/3): !Rn, register_list - * LDM(2): !Rn, !register_list - * LDR,STR,PLD immediate offset: Rd, Rn - * LDR,STR,PLD register offset: Rd, Rn, !Rm - * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm - * LDR,STR immediate pre/post-indexed: Rd, !Rn - * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm - * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm - * LDRB,STRB immediate offset: !Rd, Rn - * LDRB,STRB register offset: !Rd, Rn, !Rm - * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm - * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn - * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm - * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm - * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn - * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm - * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm - * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn - * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm - * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn - * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm - * LDREX: !Rd, !Rn - * MCR/2: !Rd - * MCRR/2,MRRC/2: !Rd, !Rn - * MLA: !Rd, !Rn, !Rm, !Rs - * MOV: Rd - * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register) - * MRS,MSR: !Rd - * MUL: !Rd, !Rm, !Rs - * PKH{BT,TB}: !Rd, !Rn, !Rm - * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn - * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn - * REV/16/SH: !Rd, !Rm - * RFE: !Rn - * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm - * SEL: !Rd, !Rn, !Rm - * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs - * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs - * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs - * SSAT/16: !Rd, !Rm - * STM(1/2): !Rn, register_list* (R15 in reg list not recommended) - * STRT immediate pre/post-indexed: Rd*, !Rn - * STRT register pre/post-indexed: Rd*, !Rn, !Rm - * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm - * STREX: !Rd, !Rn, !Rm - * SWP/B: !Rd, !Rn, !Rm - * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm - * {S,U}XT{B,B16,H}: !Rd, !Rm - * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs - * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs - * - * May transfer control by writing R15 (possible mode changes or alternate - * mode accesses marked by "*"): - * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY, - * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI* - * - * Instructions that do not take general registers, nor transfer control: - * CDP/2, SETEND, SRS* - */ diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 2ba7deb3072..1656c87501c 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -134,7 +134,8 @@ static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { regs->ARM_pc += 4; - p->ainsn.insn_handler(p, regs); + if (p->ainsn.insn_check_cc(regs->ARM_cpsr)) + p->ainsn.insn_handler(p, regs); } /* diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 22e194eb853..139e3c82736 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -79,6 +79,7 @@ struct arm_pmu { void (*write_counter)(int idx, u32 val); void (*start)(void); void (*stop)(void); + void (*reset)(void *); const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX]; @@ -204,11 +205,9 @@ armpmu_event_set_period(struct perf_event *event, static u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx) + int idx, int overflow) { - int shift = 64 - 32; - s64 prev_raw_count, new_raw_count; - u64 delta; + u64 delta, prev_raw_count, new_raw_count; again: prev_raw_count = local64_read(&hwc->prev_count); @@ -218,8 +217,13 @@ again: new_raw_count) != prev_raw_count) goto again; - delta = (new_raw_count << shift) - (prev_raw_count << shift); - delta >>= shift; + new_raw_count &= armpmu->max_period; + prev_raw_count &= armpmu->max_period; + + if (overflow) + delta = armpmu->max_period - prev_raw_count + new_raw_count + 1; + else + delta = new_raw_count - prev_raw_count; local64_add(delta, &event->count); local64_sub(delta, &hwc->period_left); @@ -236,7 +240,7 @@ armpmu_read(struct perf_event *event) if (hwc->idx < 0) return; - armpmu_event_update(event, hwc, hwc->idx); + armpmu_event_update(event, hwc, hwc->idx, 0); } static void @@ -254,7 +258,7 @@ armpmu_stop(struct perf_event *event, int flags) if (!(hwc->state & PERF_HES_STOPPED)) { armpmu->disable(hwc, hwc->idx); barrier(); /* why? */ - armpmu_event_update(event, hwc, hwc->idx); + armpmu_event_update(event, hwc, hwc->idx, 0); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } } @@ -624,6 +628,19 @@ static struct pmu pmu = { #include "perf_event_v6.c" #include "perf_event_v7.c" +/* + * Ensure the PMU has sane values out of reset. + * This requires SMP to be available, so exists as a separate initcall. + */ +static int __init +armpmu_reset(void) +{ + if (armpmu && armpmu->reset) + return on_each_cpu(armpmu->reset, NULL, 1); + return 0; +} +arch_initcall(armpmu_reset); + static int __init init_hw_perf_events(void) { @@ -729,7 +746,8 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) tail = (struct frame_tail __user *)regs->ARM_fp - 1; - while (tail && !((unsigned long)tail & 0x3)) + while ((entry->nr < PERF_MAX_STACK_DEPTH) && + tail && !((unsigned long)tail & 0x3)) tail = user_backtrace(tail, entry); } diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 6fc2d228db5..f1e8dd94afe 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -474,7 +474,7 @@ armv6pmu_handle_irq(int irq_num, continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event, hwc, idx, 1); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 2e1402556fa..4960686afb5 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -466,6 +466,7 @@ static inline unsigned long armv7_pmnc_read(void) static inline void armv7_pmnc_write(unsigned long val) { val &= ARMV7_PMNC_MASK; + isb(); asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); } @@ -502,6 +503,7 @@ static inline int armv7_pmnc_select_counter(unsigned int idx) val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); + isb(); return idx; } @@ -780,7 +782,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event, hwc, idx, 1); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -847,6 +849,18 @@ static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, } } +static void armv7pmu_reset(void *info) +{ + u32 idx, nb_cnt = armpmu->num_events; + + /* The counter and interrupt enable registers are unknown at reset. */ + for (idx = 1; idx < nb_cnt; ++idx) + armv7pmu_disable_event(NULL, idx); + + /* Initialize & Reset PMNC: C and P bits */ + armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); +} + static struct arm_pmu armv7pmu = { .handle_irq = armv7pmu_handle_irq, .enable = armv7pmu_enable_event, @@ -856,17 +870,15 @@ static struct arm_pmu armv7pmu = { .get_event_idx = armv7pmu_get_event_idx, .start = armv7pmu_start, .stop = armv7pmu_stop, + .reset = armv7pmu_reset, .raw_event_mask = 0xFF, .max_period = (1LLU << 32) - 1, }; -static u32 __init armv7_reset_read_pmnc(void) +static u32 __init armv7_read_num_pmnc_events(void) { u32 nb_cnt; - /* Initialize & Reset PMNC: C and P bits */ - armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); - /* Read the nb of CNTx counters supported from PMNC */ nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; @@ -880,7 +892,7 @@ static const struct arm_pmu *__init armv7_a8_pmu_init(void) armv7pmu.name = "ARMv7 Cortex-A8"; armv7pmu.cache_map = &armv7_a8_perf_cache_map; armv7pmu.event_map = &armv7_a8_perf_map; - armv7pmu.num_events = armv7_reset_read_pmnc(); + armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } @@ -890,7 +902,7 @@ static const struct arm_pmu *__init armv7_a9_pmu_init(void) armv7pmu.name = "ARMv7 Cortex-A9"; armv7pmu.cache_map = &armv7_a9_perf_cache_map; armv7pmu.event_map = &armv7_a9_perf_map; - armv7pmu.num_events = armv7_reset_read_pmnc(); + armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } #else diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 28cd3b025bc..39affbe4fdb 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -246,7 +246,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event, hwc, idx, 1); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -578,7 +578,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event, hwc, idx, 1); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 94bbedbed63..5e1e5419722 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -372,6 +372,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, if (clone_flags & CLONE_SETTLS) thread->tp_value = regs->ARM_r3; + thread_notify(THREAD_NOTIFY_COPY, thread); + return 0; } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 2bf27f364d0..8182f45ca49 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -767,12 +767,20 @@ long arch_ptrace(struct task_struct *child, long request, #ifdef CONFIG_HAVE_HW_BREAKPOINT case PTRACE_GETHBPREGS: + if (ptrace_get_breakpoints(child) < 0) + return -ESRCH; + ret = ptrace_gethbpregs(child, addr, (unsigned long __user *)data); + ptrace_put_breakpoints(child); break; case PTRACE_SETHBPREGS: + if (ptrace_get_breakpoints(child) < 0) + return -ESRCH; + ret = ptrace_sethbpregs(child, addr, (unsigned long __user *)data); + ptrace_put_breakpoints(child); break; #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index d1da9217427..006c1e884ea 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -466,13 +466,13 @@ static struct machine_desc * __init setup_machine(unsigned int nr) /* can't use cpu_relax() here as it may require MMU setup */; } -static int __init arm_add_memory(unsigned long start, unsigned long size) +static int __init arm_add_memory(phys_addr_t start, unsigned long size) { struct membank *bank = &meminfo.bank[meminfo.nr_banks]; if (meminfo.nr_banks >= NR_BANKS) { printk(KERN_CRIT "NR_BANKS too low, " - "ignoring memory at %#lx\n", start); + "ignoring memory at 0x%08llx\n", (long long)start); return -EINVAL; } @@ -502,7 +502,8 @@ static int __init arm_add_memory(unsigned long start, unsigned long size) static int __init early_mem(char *p) { static int usermem __initdata = 0; - unsigned long size, start; + unsigned long size; + phys_addr_t start; char *endp; /* @@ -788,30 +789,6 @@ static void __init reserve_crashkernel(void) static inline void reserve_crashkernel(void) {} #endif /* CONFIG_KEXEC */ -/* - * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by - * is_kdump_kernel() to determine if we are booting after a panic. Hence - * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE. - */ - -#ifdef CONFIG_CRASH_DUMP -/* - * elfcorehdr= specifies the location of elf core header stored by the crashed - * kernel. This option will be passed by kexec loader to the capture kernel. - */ -static int __init setup_elfcorehdr(char *arg) -{ - char *end; - - if (!arg) - return -EINVAL; - - elfcorehdr_addr = memparse(arg, &end); - return end > arg ? 0 : -EINVAL; -} -early_param("elfcorehdr", setup_elfcorehdr); -#endif /* CONFIG_CRASH_DUMP */ - static void __init squash_mem_tags(struct tag *tag) { for (; tag->hdr.size; tag = tag_next(tag)) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index cb839831764..0340224cf73 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -597,19 +597,13 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, return err; } -static inline void setup_syscall_restart(struct pt_regs *regs) -{ - regs->ARM_r0 = regs->ARM_ORIG_r0; - regs->ARM_pc -= thumb_mode(regs) ? 2 : 4; -} - /* * OK, we're invoking a handler */ static int handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, - struct pt_regs * regs, int syscall) + struct pt_regs * regs) { struct thread_info *thread = current_thread_info(); struct task_struct *tsk = current; @@ -617,26 +611,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, int ret; /* - * If we were from a system call, check for system call restarting... - */ - if (syscall) { - switch (regs->ARM_r0) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->ARM_r0 = -EINTR; - break; - case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->ARM_r0 = -EINTR; - break; - } - /* fallthrough */ - case -ERESTARTNOINTR: - setup_syscall_restart(regs); - } - } - - /* * translate the signal */ if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap) @@ -685,6 +659,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, */ static void do_signal(struct pt_regs *regs, int syscall) { + unsigned int retval = 0, continue_addr = 0, restart_addr = 0; struct k_sigaction ka; siginfo_t info; int signr; @@ -698,18 +673,61 @@ static void do_signal(struct pt_regs *regs, int syscall) if (!user_mode(regs)) return; + /* + * If we were from a system call, check for system call restarting... + */ + if (syscall) { + continue_addr = regs->ARM_pc; + restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4); + retval = regs->ARM_r0; + + /* + * Prepare for system call restart. We do this here so that a + * debugger will see the already changed PSW. + */ + switch (retval) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + regs->ARM_r0 = regs->ARM_ORIG_r0; + regs->ARM_pc = restart_addr; + break; + case -ERESTART_RESTARTBLOCK: + regs->ARM_r0 = -EINTR; + break; + } + } + if (try_to_freeze()) goto no_signal; + /* + * Get the signal to deliver. When running under ptrace, at this + * point the debugger may change all our registers ... + */ signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { sigset_t *oldset; + /* + * Depending on the signal settings we may need to revert the + * decision to restart the system call. But skip this if a + * debugger has chosen to restart at a different PC. + */ + if (regs->ARM_pc == restart_addr) { + if (retval == -ERESTARTNOHAND + || (retval == -ERESTARTSYS + && !(ka.sa.sa_flags & SA_RESTART))) { + regs->ARM_r0 = -EINTR; + regs->ARM_pc = continue_addr; + } + } + if (test_thread_flag(TIF_RESTORE_SIGMASK)) oldset = ¤t->saved_sigmask; else oldset = ¤t->blocked; - if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) { + if (handle_signal(signr, &ka, &info, oldset, regs) == 0) { /* * A signal was successfully delivered; the saved * sigmask will have been stored in the signal frame, @@ -723,11 +741,14 @@ static void do_signal(struct pt_regs *regs, int syscall) } no_signal: - /* - * No signal to deliver to the process - restart the syscall. - */ if (syscall) { - if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) { + /* + * Handle restarting a different system call. As above, + * if a debugger has chosen to restart at a different PC, + * ignore the restart. + */ + if (retval == -ERESTART_RESTARTBLOCK + && regs->ARM_pc == continue_addr) { if (thumb_mode(regs)) { regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; regs->ARM_pc -= 2; @@ -750,11 +771,6 @@ static void do_signal(struct pt_regs *regs, int syscall) #endif } } - if (regs->ARM_r0 == -ERESTARTNOHAND || - regs->ARM_r0 == -ERESTARTSYS || - regs->ARM_r0 == -ERESTARTNOINTR) { - setup_syscall_restart(regs); - } /* If there's no signal to deliver, we just put the saved sigmask * back. diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index bfad698a02e..6398ead9d1c 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -119,11 +119,19 @@ ENTRY(cpu_resume) #else ldr r0, sleep_save_sp @ stack phys addr #endif - msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off + setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off #ifdef MULTI_CPU - ldmia r0!, {r1, sp, lr, pc} @ load v:p, stack, return fn, resume fn + @ load v:p, stack, return fn, resume fn + ARM( ldmia r0!, {r1, sp, lr, pc} ) +THUMB( ldmia r0!, {r1, r2, r3, r4} ) +THUMB( mov sp, r2 ) +THUMB( mov lr, r3 ) +THUMB( bx r4 ) #else - ldmia r0!, {r1, sp, lr} @ load v:p, stack, return fn + @ load v:p, stack, return fn + ARM( ldmia r0!, {r1, sp, lr} ) +THUMB( ldmia r0!, {r1, r2, lr} ) +THUMB( mov sp, r2 ) b cpu_do_resume #endif ENDPROC(cpu_resume) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 4539ebcb089..f29b8a29b17 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -474,13 +474,12 @@ static void smp_timer_broadcast(const struct cpumask *mask) #define smp_timer_broadcast NULL #endif -#ifndef CONFIG_LOCAL_TIMERS static void broadcast_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { } -static void local_timer_setup(struct clock_event_device *evt) +static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) { evt->name = "dummy_timer"; evt->features = CLOCK_EVT_FEAT_ONESHOT | @@ -492,7 +491,6 @@ static void local_timer_setup(struct clock_event_device *evt) clockevents_register_device(evt); } -#endif void __cpuinit percpu_timer_setup(void) { @@ -502,7 +500,8 @@ void __cpuinit percpu_timer_setup(void) evt->cpumask = cpumask_of(cpu); evt->broadcast = smp_timer_broadcast; - local_timer_setup(evt); + if (local_timer_setup(evt)) + broadcast_timer_setup(evt); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 7a576092291..40ee7e5045e 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -158,7 +158,7 @@ static int emulate_swpX(unsigned int address, unsigned int *data, if (res == 0) { /* - * Barrier also required between aquiring a lock for a + * Barrier also required between acquiring a lock for a * protected resource and accessing the resource. Inserted for * same reason as above. */ diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 4ad8da15ef2..af0aaebf4de 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -311,7 +311,7 @@ asmlinkage long sys_oabi_semtimedop(int semid, long err; int i; - if (nsops < 1) + if (nsops < 1 || nsops > SEMOPM) return -EINVAL; sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL); if (!sops) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 21ac43f1c2d..3b54ad19d48 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -410,8 +410,7 @@ static int bad_syscall(int n, struct pt_regs *regs) struct thread_info *thread = current_thread_info(); siginfo_t info; - if (current->personality != PER_LINUX && - current->personality != PER_LINUX_32BIT && + if ((current->personality & PER_MASK) != PER_LINUX && thread->exec_domain->handler) { thread->exec_domain->handler(n, regs); return regs->ARM_r0; @@ -712,17 +711,17 @@ EXPORT_SYMBOL(__readwrite_bug); void __pte_error(const char *file, int line, pte_t pte) { - printk("%s:%d: bad pte %08lx.\n", file, line, pte_val(pte)); + printk("%s:%d: bad pte %08llx.\n", file, line, (long long)pte_val(pte)); } void __pmd_error(const char *file, int line, pmd_t pmd) { - printk("%s:%d: bad pmd %08lx.\n", file, line, pmd_val(pmd)); + printk("%s:%d: bad pmd %08llx.\n", file, line, (long long)pmd_val(pmd)); } void __pgd_error(const char *file, int line, pgd_t pgd) { - printk("%s:%d: bad pgd %08lx.\n", file, line, pgd_val(pgd)); + printk("%s:%d: bad pgd %08llx.\n", file, line, (long long)pgd_val(pgd)); } asmlinkage void __div0(void) diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index e2d2f2cd0c4..8b9b13649f8 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -27,13 +27,18 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) pgd_t *pgd; pmd_t *pmd; pte_t *pte; + pud_t *pud; spinlock_t *ptl; pgd = pgd_offset(current->mm, addr); if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd))) return 0; - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + if (unlikely(pud_none(*pud) || pud_bad(*pud))) + return 0; + + pmd = pmd_offset(pud, addr); if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd))) return 0; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 19390231a0e..2d299bf5d72 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -83,6 +83,7 @@ config ARCH_AT91CAP9 select CPU_ARM926T select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL + select HAVE_NET_MACB config ARCH_AT572D940HF bool "AT572D940HF" diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index d1f775e8635..9ffbf3a2dfe 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) return; if (cpu_is_at91cap9_revB()) - set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH); + irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH); /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { @@ -157,7 +157,7 @@ static struct platform_device at91_usba_udc_device = { void __init at91_add_device_usba(struct usba_platform_data *data) { if (cpu_is_at91cap9_revB()) { - set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH); + irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH); at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS | AT91_MATRIX_UDPHS_BYPASS_LOCK); } @@ -861,7 +861,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) return; if (cpu_is_at91cap9_revB()) - set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH); + irq_set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH); at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 2e74a19874d..295e1e77fa6 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -76,7 +76,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = { .pullup_pin = AT91_PIN_PD9, }; -/* FIXME: user dependant */ +/* FIXME: user dependent */ // static struct at91_cf_data __initdata carmeva_cf_data = { // .det_pin = AT91_PIN_PB0, // .rst_pin = AT91_PIN_PC5, diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index 1f9d3cb64c5..d8df59a3426 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -30,6 +30,11 @@ #include <mach/board.h> #include "generic.h" +static void __init at91eb01_init_irq(void) +{ + at91x40_init_interrupts(NULL); +} + static void __init at91eb01_map_io(void) { at91x40_initialize(40000000); @@ -38,7 +43,7 @@ static void __init at91eb01_map_io(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ .timer = &at91x40_timer, - .init_irq = at91x40_init_interrupts, + .init_irq = at91eb01_init_irq, .map_io = at91eb01_map_io, MACHINE_END diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index af818a21587..4615528205c 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -287,7 +287,7 @@ static int gpio_irq_set_wake(struct irq_data *d, unsigned state) else wakeups[bank] &= ~mask; - set_irq_wake(gpio_chip[bank].bank->id, state); + irq_set_irq_wake(gpio_chip[bank].bank->id, state); return 0; } @@ -375,6 +375,7 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) static struct irq_chip gpio_irqchip = { .name = "GPIO", + .irq_disable = gpio_irq_mask, .irq_mask = gpio_irq_mask, .irq_unmask = gpio_irq_unmask, .irq_set_type = gpio_irq_type, @@ -384,16 +385,14 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { unsigned pin; - struct irq_desc *gpio; - struct at91_gpio_chip *at91_gpio; - void __iomem *pio; + struct irq_data *idata = irq_desc_get_irq_data(desc); + struct irq_chip *chip = irq_data_get_irq_chip(idata); + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata); + void __iomem *pio = at91_gpio->regbase; u32 isr; - at91_gpio = get_irq_chip_data(irq); - pio = at91_gpio->regbase; - /* temporarily mask (level sensitive) parent IRQ */ - desc->irq_data.chip->irq_ack(&desc->irq_data); + chip->irq_ack(idata); for (;;) { /* Reading ISR acks pending (edge triggered) GPIO interrupts. * When there none are pending, we're finished unless we need @@ -409,27 +408,15 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) } pin = at91_gpio->chip.base; - gpio = &irq_desc[pin]; while (isr) { - if (isr & 1) { - if (unlikely(gpio->depth)) { - /* - * The core ARM interrupt handler lazily disables IRQs so - * another IRQ must be generated before it actually gets - * here to be disabled on the GPIO controller. - */ - gpio_irq_mask(irq_get_irq_data(pin)); - } - else - generic_handle_irq(pin); - } + if (isr & 1) + generic_handle_irq(pin); pin++; - gpio++; isr >>= 1; } } - desc->irq_data.chip->irq_unmask(&desc->irq_data); + chip->irq_unmask(idata); /* now it may re-trigger */ } @@ -518,14 +505,14 @@ void __init at91_gpio_irq_setup(void) __raw_writel(~0, this->regbase + PIO_IDR); for (i = 0, pin = this->chip.base; i < 32; i++, pin++) { - lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class); + irq_set_lockdep_class(pin, &gpio_lock_class); /* * Can use the "simple" and not "edge" handler since it's * shorter, and the AIC handles interrupts sanely. */ - set_irq_chip(pin, &gpio_irqchip); - set_irq_handler(pin, handle_simple_irq); + irq_set_chip_and_handler(pin, &gpio_irqchip, + handle_simple_irq); set_irq_flags(pin, IRQF_VALID); } @@ -536,8 +523,8 @@ void __init at91_gpio_irq_setup(void) if (prev && prev->next == this) continue; - set_irq_chip_data(id, this); - set_irq_chained_handler(id, gpio_irq_handler); + irq_set_chip_data(id, this); + irq_set_chained_handler(id, gpio_irq_handler); } pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks); } diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h index 2d9b0af9c4d..be510cfc56b 100644 --- a/arch/arm/mach-at91/include/mach/at572d940hf.h +++ b/arch/arm/mach-at91/include/mach/at572d940hf.h @@ -89,7 +89,7 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_AIC (0xfffff000 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h index 27ac6f550fe..02182c16a02 100644 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ b/arch/arm/mach-at91/include/mach/at91_mci.h @@ -102,7 +102,7 @@ #define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ #define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ #define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ -#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */ +#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */ #define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ #define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ #define AT91_MCI_OVRE (1 << 30) /* Overrun */ diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 3bef931d0b1..0700f212530 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -27,6 +27,7 @@ #define ARCH_ID_AT91SAM9G45 0x819b05a0 #define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ #define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ +#define ARCH_ID_AT91SAM9X5 0x819a05a0 #define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 @@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void) #define ARCH_EXID_AT91SAM9G46 0x00000003 #define ARCH_EXID_AT91SAM9G45 0x00000004 +#define ARCH_EXID_AT91SAM9G15 0x00000000 +#define ARCH_EXID_AT91SAM9G35 0x00000001 +#define ARCH_EXID_AT91SAM9X35 0x00000002 +#define ARCH_EXID_AT91SAM9G25 0x00000003 +#define ARCH_EXID_AT91SAM9X25 0x00000004 + static inline unsigned long at91_exid_identify(void) { return at91_sys_read(AT91_DBGU_EXID); @@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void) #define cpu_is_at91sam9m11() (0) #endif +#ifdef CONFIG_ARCH_AT91SAM9X5 +#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5) +#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G15)) +#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G35)) +#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9X35)) +#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G25)) +#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9X25)) +#else +#define cpu_is_at91sam9x5() (0) +#define cpu_is_at91sam9g15() (0) +#define cpu_is_at91sam9g35() (0) +#define cpu_is_at91sam9x35() (0) +#define cpu_is_at91sam9g25() (0) +#define cpu_is_at91sam9x25() (0) +#endif + #ifdef CONFIG_ARCH_AT91CAP9 #define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) #define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B) diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index ddeb6453675..056dc6674b6 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -208,7 +208,7 @@ extern void at91_gpio_resume(void); /*-------------------------------------------------------------------------*/ -/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should +/* wrappers for "new style" GPIO calls. the old AT91-specific ones should * eventually be removed (along with this errno.h inclusion), and the * gpio request/free calls should probably be implemented. */ diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index b56d6b3a408..9665265ec75 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -143,8 +143,7 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) /* Active Low interrupt, with the specified priority */ at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); - set_irq_chip(i, &at91_aic_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */ diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c index 77f84b40dda..a1f328357aa 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c @@ -551,7 +551,7 @@ int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Config /****************************************************************************/ /** -* @brief Check the existance of pending descriptor +* @brief Check the existence of pending descriptor * * This function confirmes if there is any pending descriptor in the chain * to program the channel @@ -775,7 +775,7 @@ int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Cha /** * @brief Read data DMAed to memory * -* This function will read data that has been DMAed to memory while transfering from: +* This function will read data that has been DMAed to memory while transferring from: * - Memory to memory * - Peripheral to memory * @@ -941,7 +941,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurat /** * @brief Sets channel specific user data * -* This function associates user data to a specif DMA channel +* This function associates user data to a specific DMA channel * */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 8d1baf3f468..d87ad30dda3 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -629,7 +629,7 @@ EXPORT_SYMBOL(dma_get_device_descriptor_ring); * Configures a DMA channel. * * @return -* >= 0 - Initialization was successfull. +* >= 0 - Initialization was successful. * * -EBUSY - Device is currently being used. * -ENODEV - Device handed in is invalid. @@ -673,7 +673,7 @@ static int ConfigChannel(DMA_Handle_t handle) /** * Initializes all of the data structures associated with the DMA. * @return -* >= 0 - Initialization was successfull. +* >= 0 - Initialization was successful. * * -EBUSY - Device is currently being used. * -ENODEV - Device handed in is invalid. diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h index 6c8da2b9fc1..e6a1dc484ca 100644 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h @@ -362,7 +362,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurati /** * @brief Read data DMA transferred to memory * -* This function will read data that has been DMAed to memory while transfering from: +* This function will read data that has been DMAed to memory while transferring from: * - Memory to memory * - Peripheral to memory * @@ -446,7 +446,7 @@ void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle * /****************************************************************************/ /** -* @brief Check the existance of pending descriptor +* @brief Check the existence of pending descriptor * * This function confirmes if there is any pending descriptor in the chain * to program the channel @@ -542,7 +542,7 @@ dmacHw_HANDLE_t dmacHw_getInterruptSource(void); /** * @brief Sets channel specific user data * -* This function associates user data to a specif DMA channel +* This function associates user data to a specific DMA channel * */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h index 70eaea866cf..161973385fa 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h @@ -180,7 +180,7 @@ typedef enum { #define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */ -/* Programable pin defines */ +/* Programmable pin defines */ #define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF) /* GPIO pin 0 - 60 */ #define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h index c78833acb37..03238c29900 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h @@ -832,7 +832,7 @@ static inline void chipcHw_setUsbDevice(void) /****************************************************************************/ /** -* @brief Lower layer funtion to enable/disable a clock of a certain device +* @brief Lower layer function to enable/disable a clock of a certain device * * This function enables/disables a core clock * diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h index e01fc4607c9..0aeb6a6fe7f 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h @@ -109,9 +109,9 @@ #define INTCHW_INTC0_DMA0C0 (1<<INTCHW_INTC0_DMA0C0_BITNUM) /* INTC1 - interrupt controller 1 */ -#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */ +#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */ #define INTCHW_INTC1_DDRVPMT_BITNUM 26 /* DDR and VPM HW phase align timeout interrupt (Not for A0) */ -#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interupt (For A0 only)) */ +#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interrupt (For A0 only)) */ #define INTCHW_INTC1_RTC2_BITNUM 25 /* Real time clock tamper interrupt */ #define INTCHW_INTC1_VDEC_BITNUM 24 /* Hantro Video Decoder interrupt */ /* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h index 06a355481ea..0992842caa7 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_umi.h +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -88,7 +88,7 @@ /* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ /* Enable wait pin during burst write or read */ #define REG_UMI_TCR_WAITEN 0x80000000 -/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */ +/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */ #define REG_UMI_TCR_LOWFREQ 0x40000000 /* 1=synch write, 0=async write */ #define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c index 84dcda0d1d9..c48feaf4e8e 100644 --- a/arch/arm/mach-bcmring/irq.c +++ b/arch/arm/mach-bcmring/irq.c @@ -93,11 +93,11 @@ static void vic_init(void __iomem *base, struct irq_chip *chip, unsigned int i; for (i = 0; i < 32; i++) { unsigned int irq = irq_start + i; - set_irq_chip(irq, chip); - set_irq_chip_data(irq, base); + irq_set_chip(irq, chip); + irq_set_chip_data(irq, base); if (vic_sources & (1 << i)) { - set_irq_handler(irq, handle_level_irq); + irq_set_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } @@ -119,9 +119,9 @@ void __init bcmring_init_irq(void) /* special cases */ if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) { - set_irq_handler(IRQ_GPIO0, handle_simple_irq); + irq_set_handler(IRQ_GPIO0, handle_simple_irq); } if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) { - set_irq_handler(IRQ_GPIO1, handle_simple_irq); + irq_set_handler(IRQ_GPIO1, handle_simple_irq); } } diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c index 86da7a1b2bb..c2eceee645e 100644 --- a/arch/arm/mach-clps711x/irq.c +++ b/arch/arm/mach-clps711x/irq.c @@ -112,13 +112,13 @@ void __init clps711x_init_irq(void) for (i = 0; i < NR_IRQS; i++) { if (INT1_IRQS & (1 << i)) { - set_irq_handler(i, handle_level_irq); - set_irq_chip(i, &int1_chip); + irq_set_chip_and_handler(i, &int1_chip, + handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } if (INT2_IRQS & (1 << i)) { - set_irq_handler(i, handle_level_irq); - set_irq_chip(i, &int2_chip); + irq_set_chip_and_handler(i, &int2_chip, + handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 32f147998cd..c0deacae778 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM depends on ARCH_DAVINCI_DM644x select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify the whether the board used for development is a DM644x EVM @@ -72,6 +73,7 @@ config MACH_SFFSDR depends on ARCH_DAVINCI_DM644x select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. @@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM select MACH_DAVINCI_DM6467TEVM select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify the whether the board used for development is a DM6467 EVM @@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM depends on ARCH_DAVINCI_DM365 select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify whether the board used for development is a DM365 EVM @@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM select GPIO_PCF857X select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. @@ -205,6 +210,7 @@ config MACH_MITYOMAPL138 depends on ARCH_DAVINCI_DA850 select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 2aa79c54f98..606a6f27ed6 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -29,7 +29,7 @@ #include <mach/mux.h> #include <mach/spi.h> -#define MITYOMAPL138_PHY_ID "0:03" +#define MITYOMAPL138_PHY_ID "" #define FACTORY_CONFIG_MAGIC 0x012C0138 #define FACTORY_CONFIG_VERSION 0x00010001 @@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = { static struct platform_device mityomapl138_nandflash_device = { .name = "davinci_nand", - .id = 0, + .id = 1, .dev = { .platform_data = &mityomapl138_nandflash_data, }, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 6c389ff1020..3e7be2de96d 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -11,7 +11,7 @@ * DM644X-EVM board. It has: * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. - * Additionaly realtime clock, IR remote control receiver, + * Additionally realtime clock, IR remote control receiver, * IR Blaster based on MSP430 (firmware although is different * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive * with PATA interface, two muxed red-green leds. diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index 9abc80a86a2..f83152d643c 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -167,9 +167,9 @@ void __init cp_intc_init(void) /* Set up genirq dispatching for cp_intc */ for (i = 0; i < num_irq; i++) { - set_irq_chip(i, &cp_intc_irq_chip); + irq_set_chip(i, &cp_intc_irq_chip); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - set_irq_handler(i, handle_edge_irq); + irq_set_handler(i, handle_edge_irq); } /* Enable global interrupt */ diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 4a68c2b1ec1..0a95be1512b 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -167,7 +167,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy) /* * Time measurement across the target() function yields ~1500-1800us * time taken with no drivers on notification list. - * Setting the latency to 2000 us to accomodate addition of drivers + * Setting the latency to 2000 us to accommodate addition of drivers * to pre/post change notification list. */ policy->cpuinfo.transition_latency = 2000 * 1000; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 68fe4c289d7..b95b9196dee 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1123,7 +1123,7 @@ void __init da850_init(void) * This helps keeping the peripherals on this domain insulated * from CPU frequency changes caused by DVFS. The firmware sets * both PLL0 and PLL1 to the same frequency so, there should not - * be any noticible change even in non-DVFS use cases. + * be any noticeable change even in non-DVFS use cases. */ da850_set_async3_src(1); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 625d4b66718..58a02dc7b15 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -39,7 +39,8 @@ #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_I2C1_BASE 0x01e28000 #define DA8XX_SPI0_BASE 0x01c41000 -#define DA8XX_SPI1_BASE 0x01f0e000 +#define DA830_SPI1_BASE 0x01e12000 +#define DA850_SPI1_BASE 0x01f0e000 #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 @@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = { static struct resource da8xx_spi1_resources[] = { [0] = { - .start = DA8XX_SPI1_BASE, - .end = DA8XX_SPI1_BASE + SZ_4K - 1, + .start = DA830_SPI1_BASE, + .end = DA830_SPI1_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info, da8xx_spi_pdata[instance].num_chipselect = len; + if (instance == 1 && cpu_is_davinci_da850()) { + da8xx_spi1_resources[0].start = DA850_SPI1_BASE; + da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1; + } + return platform_device_register(&da8xx_spi_device[instance]); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 76364d1345d..a3a94e9c937 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -314,7 +314,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why cant' this be disabled? */ + .usecount = 1, /* REVISIT: why can't this be disabled? */ }; static struct clk timer3_clk = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 9a2376b3137..4c82c271629 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -274,7 +274,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why cant' this be disabled? */ + .usecount = 1, /* REVISIT: why can't this be disabled? */ }; static struct clk_lookup dm644x_clks[] = { diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index 20d66e5e466..a0b838894ac 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -62,7 +62,7 @@ static inline struct davinci_gpio_regs __iomem *irq2regs(int irq) { struct davinci_gpio_regs __iomem *g; - g = (__force struct davinci_gpio_regs __iomem *)get_irq_chip_data(irq); + g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq); return g; } @@ -208,7 +208,7 @@ pure_initcall(davinci_gpio_setup); static void gpio_irq_disable(struct irq_data *d) { struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_data(d); + u32 mask = (u32) irq_data_get_irq_handler_data(d); __raw_writel(mask, &g->clr_falling); __raw_writel(mask, &g->clr_rising); @@ -217,8 +217,8 @@ static void gpio_irq_disable(struct irq_data *d) static void gpio_irq_enable(struct irq_data *d) { struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_data(d); - unsigned status = irq_desc[d->irq].status; + u32 mask = (u32) irq_data_get_irq_handler_data(d); + unsigned status = irqd_get_trigger_type(d); status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; if (!status) @@ -233,21 +233,11 @@ static void gpio_irq_enable(struct irq_data *d) static int gpio_irq_type(struct irq_data *d, unsigned trigger) { struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_data(d); + u32 mask = (u32) irq_data_get_irq_handler_data(d); if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) return -EINVAL; - irq_desc[d->irq].status &= ~IRQ_TYPE_SENSE_MASK; - irq_desc[d->irq].status |= trigger; - - /* don't enable the IRQ if it's currently disabled */ - if (irq_desc[d->irq].depth == 0) { - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) - ? &g->set_falling : &g->clr_falling); - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) - ? &g->set_rising : &g->clr_rising); - } return 0; } @@ -256,6 +246,7 @@ static struct irq_chip gpio_irqchip = { .irq_enable = gpio_irq_enable, .irq_disable = gpio_irq_disable, .irq_set_type = gpio_irq_type, + .flags = IRQCHIP_SET_TYPE_MASKED, }; static void @@ -285,7 +276,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) status >>= 16; /* now demux them to the right lowlevel handler */ - n = (int)get_irq_data(irq); + n = (int)irq_get_handler_data(irq); while (status) { res = ffs(status); n += res; @@ -323,7 +314,7 @@ static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger) { struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_data(d); + u32 mask = (u32) irq_data_get_irq_handler_data(d); if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) return -EINVAL; @@ -395,7 +386,7 @@ static int __init davinci_gpio_irq_setup(void) /* AINTC handles mask/unmask; GPIO handles triggering */ irq = bank_irq; - gpio_irqchip_unbanked = *get_irq_desc_chip(irq_to_desc(irq)); + gpio_irqchip_unbanked = *irq_get_chip(irq); gpio_irqchip_unbanked.name = "GPIO-AINTC"; gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked; @@ -406,10 +397,10 @@ static int __init davinci_gpio_irq_setup(void) /* set the direct IRQs up to use that irqchip */ for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) { - set_irq_chip(irq, &gpio_irqchip_unbanked); - set_irq_data(irq, (void *) __gpio_mask(gpio)); - set_irq_chip_data(irq, (__force void *) g); - irq_desc[irq].status |= IRQ_TYPE_EDGE_BOTH; + irq_set_chip(irq, &gpio_irqchip_unbanked); + irq_set_handler_data(irq, (void *)__gpio_mask(gpio)); + irq_set_chip_data(irq, (__force void *)g); + irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH); } goto done; @@ -430,15 +421,15 @@ static int __init davinci_gpio_irq_setup(void) __raw_writel(~0, &g->clr_rising); /* set up all irqs in this bank */ - set_irq_chained_handler(bank_irq, gpio_irq_handler); - set_irq_chip_data(bank_irq, (__force void *) g); - set_irq_data(bank_irq, (void *) irq); + irq_set_chained_handler(bank_irq, gpio_irq_handler); + irq_set_chip_data(bank_irq, (__force void *)g); + irq_set_handler_data(bank_irq, (void *)irq); for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { - set_irq_chip(irq, &gpio_irqchip); - set_irq_chip_data(irq, (__force void *) g); - set_irq_data(irq, (void *) __gpio_mask(gpio)); - set_irq_handler(irq, handle_simple_irq); + irq_set_chip(irq, &gpio_irqchip); + irq_set_chip_data(irq, (__force void *)g); + irq_set_handler_data(irq, (void *)__gpio_mask(gpio)); + irq_set_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index cea6b897204..957fb87e832 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -4,7 +4,7 @@ * Author: Kevin Hilman, Deep Root Systems, LLC * * Defines the cpu_is_*() macros for runtime detection of DaVinci - * device type. In addtion, if support for a given device is not + * device type. In addition, if support for a given device is not * compiled in to the kernel, the macros return 0 so that * resulting code can be optimized out. * diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 9f1befc5ac3..f8b7ea4f623 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -24,6 +24,9 @@ #define UART_SHIFT 2 +#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) +#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) + .pushsection .data davinci_uart_phys: .word 0 davinci_uart_virt: .word 0 @@ -34,7 +37,7 @@ davinci_uart_virt: .word 0 /* Use davinci_uart_phys/virt if already configured */ 10: mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? - ldreq \rp, =__virt_to_phys(davinci_uart_phys) + ldreq \rp, =davinci_uart_v2p(davinci_uart_phys) ldrne \rp, =davinci_uart_phys add \rv, \rp, #4 @ davinci_uart_virt ldr \rp, [\rp, #0] @@ -48,18 +51,18 @@ davinci_uart_virt: .word 0 tst \rp, #1 @ MMU enabled? /* Copy uart phys address from decompressor uart info */ - ldreq \rv, =__virt_to_phys(davinci_uart_phys) + ldreq \rv, =davinci_uart_v2p(davinci_uart_phys) ldrne \rv, =davinci_uart_phys ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) ldr \rp, [\rp, #0] str \rp, [\rv] /* Copy uart virt address from decompressor uart info */ - ldreq \rv, =__virt_to_phys(davinci_uart_virt) + ldreq \rv, =davinci_uart_v2p(davinci_uart_virt) ldrne \rv, =davinci_uart_virt ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) ldr \rp, [\rp, #4] str \rp, [\rv] diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 8051110b8ac..c9e6ce185a6 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -22,7 +22,7 @@ * * This area sits just below the page tables (see arch/arm/kernel/head.S). */ -#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8) +#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8) #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index 5e05c9b64e1..e6269a6e001 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -154,11 +154,11 @@ void __init davinci_irq_init(void) /* set up genirq dispatch for ARM INTC */ for (i = 0; i < davinci_soc_info.intc_irq_num; i++) { - set_irq_chip(i, &davinci_irq_chip_0); + irq_set_chip(i, &davinci_irq_chip_0); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); if (i != IRQ_TINT1_TINT34) - set_irq_handler(i, handle_edge_irq); + irq_set_handler(i, handle_edge_irq); else - set_irq_handler(i, handle_level_irq); + irq_set_handler(i, handle_level_irq); } } diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index e5fcdd3f5bf..b20ec9af788 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -136,7 +136,7 @@ #define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) #define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) #define DOVE_NAND_GPIO_EN (1 << 0) -#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40) +#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) #define DOVE_SPI_GPIO_SEL (1 << 5) #define DOVE_UART1_GPIO_SEL (1 << 4) #define DOVE_AU1_GPIO_SEL (1 << 3) diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 101707fa2e2..f07fd16e0c9 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -86,8 +86,7 @@ static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc) if (!(cause & (1 << irq))) continue; irq = pmu_to_irq(irq); - desc = irq_desc + irq; - desc_handle_irq(irq, desc); + generic_handle_irq(irq); } } @@ -103,14 +102,14 @@ void __init dove_init_irq(void) */ orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, IRQ_DOVE_GPIO_START); - set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler); - set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler); - set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler); - set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler); + irq_set_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler); + irq_set_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler); + irq_set_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler); + irq_set_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler); orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 32); - set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler); + irq_set_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler); orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 64); @@ -122,10 +121,9 @@ void __init dove_init_irq(void) writel(0, PMU_INTERRUPT_CAUSE); for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) { - set_irq_chip(i, &pmu_irq_chip); - set_irq_handler(i, handle_level_irq); - irq_desc[i].status |= IRQ_LEVEL; + irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); set_irq_flags(i, IRQF_VALID); } - set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler); + irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler); } diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c index 71db2bdf2f2..c66c7634690 100644 --- a/arch/arm/mach-dove/mpp.c +++ b/arch/arm/mach-dove/mpp.c @@ -147,9 +147,6 @@ void __init dove_mpp_conf(unsigned int *mpp_list) u32 pmu_sig_ctrl[PMU_SIG_REGS]; int i; - /* Initialize gpiolib. */ - orion_gpio_init(); - for (i = 0; i < MPP_NR_REGS; i++) mpp_ctrl[i] = readl(MPP_CTRL(i)); diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 7df083f37fa..087bc771ac2 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -66,8 +66,8 @@ static void __init ebsa110_init_irq(void) local_irq_restore(flags); for (irq = 0; irq < NR_IRQS; irq++) { - set_irq_chip(irq, &ebsa110_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &ebsa110_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index a889fa7c3ba..a5a9ff70b19 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -101,7 +101,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) { /* - * map discontiguous hw irq range to continous sw irq range: + * map discontiguous hw irq range to continuous sw irq range: * * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) */ @@ -117,7 +117,7 @@ static void ep93xx_gpio_irq_ack(struct irq_data *d) int port = line >> 3; int port_mask = 1 << (line & 7); - if ((irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { gpio_int_type2[port] ^= port_mask; /* switch edge direction */ ep93xx_gpio_update_int_params(port); } @@ -131,7 +131,7 @@ static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) int port = line >> 3; int port_mask = 1 << (line & 7); - if ((irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) gpio_int_type2[port] ^= port_mask; /* switch edge direction */ gpio_int_unmasked[port] &= ~port_mask; @@ -165,10 +165,10 @@ static void ep93xx_gpio_irq_unmask(struct irq_data *d) */ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) { - struct irq_desc *desc = irq_desc + d->irq; const int gpio = irq_to_gpio(d->irq); const int port = gpio >> 3; const int port_mask = 1 << (gpio & 7); + irq_flow_handler_t handler; gpio_direction_input(gpio); @@ -176,22 +176,22 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) case IRQ_TYPE_EDGE_RISING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] |= port_mask; - desc->handle_irq = handle_edge_irq; + handler = handle_edge_irq; break; case IRQ_TYPE_EDGE_FALLING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] &= ~port_mask; - desc->handle_irq = handle_edge_irq; + handler = handle_edge_irq; break; case IRQ_TYPE_LEVEL_HIGH: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] |= port_mask; - desc->handle_irq = handle_level_irq; + handler = handle_level_irq; break; case IRQ_TYPE_LEVEL_LOW: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] &= ~port_mask; - desc->handle_irq = handle_level_irq; + handler = handle_level_irq; break; case IRQ_TYPE_EDGE_BOTH: gpio_int_type1[port] |= port_mask; @@ -200,17 +200,16 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) gpio_int_type2[port] &= ~port_mask; /* falling */ else gpio_int_type2[port] |= port_mask; /* rising */ - desc->handle_irq = handle_edge_irq; + handler = handle_edge_irq; break; default: pr_err("failed to set irq type %d for gpio %d\n", type, gpio); return -EINVAL; } - gpio_int_enabled[port] |= port_mask; + __irq_set_handler_locked(d->irq, handler); - desc->status &= ~IRQ_TYPE_SENSE_MASK; - desc->status |= type & IRQ_TYPE_SENSE_MASK; + gpio_int_enabled[port] |= port_mask; ep93xx_gpio_update_int_params(port); @@ -232,20 +231,29 @@ void __init ep93xx_gpio_init_irq(void) for (gpio_irq = gpio_to_irq(0); gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { - set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip); - set_irq_handler(gpio_irq, handle_level_irq); + irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip, + handle_level_irq); set_irq_flags(gpio_irq, IRQF_VALID); } - set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler); - set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler); - set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler); - set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler); - set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler); - set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler); - set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler); - set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler); - set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO_AB, + ep93xx_gpio_ab_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX, + ep93xx_gpio_f_irq_handler); } @@ -360,52 +368,14 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) gpio = ep93xx_chip->chip.base; for (i = 0; i < chip->ngpio; i++, gpio++) { int is_out = data_dir_reg & (1 << i); + int irq = gpio_to_irq(gpio); - seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s", + seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s %s\n", chip->label, i, gpio, gpiochip_is_requested(chip, i) ? : "", is_out ? "out" : "in ", - (data_reg & (1 << i)) ? "hi" : "lo"); - - if (!is_out) { - int irq = gpio_to_irq(gpio); - struct irq_desc *desc = irq_desc + irq; - - if (irq >= 0 && desc->action) { - char *trigger; - - switch (desc->status & IRQ_TYPE_SENSE_MASK) { - case IRQ_TYPE_NONE: - trigger = "(default)"; - break; - case IRQ_TYPE_EDGE_FALLING: - trigger = "edge-falling"; - break; - case IRQ_TYPE_EDGE_RISING: - trigger = "edge-rising"; - break; - case IRQ_TYPE_EDGE_BOTH: - trigger = "edge-both"; - break; - case IRQ_TYPE_LEVEL_HIGH: - trigger = "level-high"; - break; - case IRQ_TYPE_LEVEL_LOW: - trigger = "level-low"; - break; - default: - trigger = "?trigger?"; - break; - } - - seq_printf(s, " irq-%d %s%s", - irq, trigger, - (desc->status & IRQ_WAKEUP) - ? " wakeup" : ""); - } - } - - seq_printf(s, "\n"); + (data_reg & (1<< i)) ? "hi" : "lo", + (!is_out && irq>= 0) ? "(interrupt)" : ""); } } diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index a021b5240bb..e849f67be47 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -20,6 +20,11 @@ config EXYNOS4_MCT help Use MCT (Multi Core Timer) as kernel timers +config EXYNOS4_DEV_AHCI + bool + help + Compile in platform device definitions for AHCI + config EXYNOS4_DEV_PD bool help @@ -134,9 +139,9 @@ config MACH_ARMLEX4210 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 + select EXYNOS4_DEV_AHCI select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_SDHCI - select SATA_AHCI_PLATFORM help Machine support for Samsung ARMLEX4210 based on EXYNOS4210 diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index b8f0e7d82d7..9be104f63c0 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_MACH_NURI) += mach-nuri.o # device support obj-y += dev-audio.o +obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o @@ -53,4 +54,3 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_SATA_AHCI_PLATFORM) += dev-ahci.o diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S index 58bbd049a6c..a442ef86116 100644 --- a/arch/arm/mach-exynos4/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S @@ -21,8 +21,8 @@ */ .macro addruart, rp, rv - ldreq \rp, = S3C_PA_UART - ldrne \rv, = S3C_VA_UART + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h index 939728b38d4..be9266b10fd 100644 --- a/arch/arm/mach-exynos4/include/mach/gpio.h +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -18,7 +18,7 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq -/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ +/* Practically, GPIO banks up to GPZ are the configurable gpio banks */ /* GPIO bank sizes */ #define EXYNOS4_GPIO_A0_NR (8) diff --git a/arch/arm/mach-exynos4/irq-combiner.c b/arch/arm/mach-exynos4/irq-combiner.c index 31618d91ce1..f488b66d680 100644 --- a/arch/arm/mach-exynos4/irq-combiner.c +++ b/arch/arm/mach-exynos4/irq-combiner.c @@ -54,8 +54,8 @@ static void combiner_unmask_irq(struct irq_data *data) static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) { - struct combiner_chip_data *chip_data = get_irq_data(irq); - struct irq_chip *chip = get_irq_chip(irq); + struct combiner_chip_data *chip_data = irq_get_handler_data(irq); + struct irq_chip *chip = irq_get_chip(irq); unsigned int cascade_irq, combiner_irq; unsigned long status; @@ -93,9 +93,9 @@ void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) { if (combiner_nr >= MAX_COMBINER_NR) BUG(); - if (set_irq_data(irq, &combiner_data[combiner_nr]) != 0) + if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0) BUG(); - set_irq_chained_handler(irq, combiner_handle_cascade_irq); + irq_set_chained_handler(irq, combiner_handle_cascade_irq); } void __init combiner_init(unsigned int combiner_nr, void __iomem *base, @@ -119,9 +119,8 @@ void __init combiner_init(unsigned int combiner_nr, void __iomem *base, for (i = irq_start; i < combiner_data[combiner_nr].irq_offset + MAX_IRQ_IN_COMBINER; i++) { - set_irq_chip(i, &combiner_chip); - set_irq_chip_data(i, &combiner_data[combiner_nr]); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq); + irq_set_chip_data(i, &combiner_data[combiner_nr]); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c index 4f7ad4a796e..9d87d2ac7f6 100644 --- a/arch/arm/mach-exynos4/irq-eint.c +++ b/arch/arm/mach-exynos4/irq-eint.c @@ -190,8 +190,8 @@ static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) { - u32 *irq_data = get_irq_data(irq); - struct irq_chip *chip = get_irq_chip(irq); + u32 *irq_data = irq_get_handler_data(irq); + struct irq_chip *chip = irq_get_chip(irq); chip->irq_mask(&desc->irq_data); @@ -208,18 +208,19 @@ int __init exynos4_init_irq_eint(void) int irq; for (irq = 0 ; irq <= 31 ; irq++) { - set_irq_chip(IRQ_EINT(irq), &exynos4_irq_eint); - set_irq_handler(IRQ_EINT(irq), handle_level_irq); + irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint, + handle_level_irq); set_irq_flags(IRQ_EINT(irq), IRQF_VALID); } - set_irq_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31); + irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31); for (irq = 0 ; irq <= 15 ; irq++) { eint0_15_data[irq] = IRQ_EINT(irq); - set_irq_data(exynos4_get_irq_nr(irq), &eint0_15_data[irq]); - set_irq_chained_handler(exynos4_get_irq_nr(irq), + irq_set_handler_data(exynos4_get_irq_nr(irq), + &eint0_15_data[irq]); + irq_set_chained_handler(exynos4_get_irq_nr(irq), exynos4_irq_eint0_15); } diff --git a/arch/arm/mach-exynos4/localtimer.c b/arch/arm/mach-exynos4/localtimer.c index 2a2993ae8d8..6bf3d0ab962 100644 --- a/arch/arm/mach-exynos4/localtimer.c +++ b/arch/arm/mach-exynos4/localtimer.c @@ -18,8 +18,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c index 25a25681812..e645f7a955f 100644 --- a/arch/arm/mach-exynos4/mach-smdkc210.c +++ b/arch/arm/mach-exynos4/mach-smdkc210.c @@ -125,7 +125,7 @@ static struct resource smdkc210_smsc911x_resources[] = { }; static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, .phy_interface = PHY_INTERFACE_MODE_MII, diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 88e0275143b..152676471b6 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -127,7 +127,7 @@ static struct resource smdkv310_smsc911x_resources[] = { }; static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, .phy_interface = PHY_INTERFACE_MODE_MII, diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index af82a8fbb68..14ac10b7ec0 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -276,7 +276,7 @@ static void exynos4_mct_tick_start(unsigned long cycles, /* update interrupt count buffer */ exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET); - /* enable MCT tick interupt */ + /* enable MCT tick interrupt */ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET); diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c index 1b3d3a2de95..e8d08bf8965 100644 --- a/arch/arm/mach-exynos4/setup-sdhci-gpio.c +++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c @@ -38,14 +38,14 @@ void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-funtion 3 */ + /* Data pin GPK1[3:6] to special-function 3 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } case 4: for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { - /* Data pin GPK0[3:6] to special-funtion 2 */ + /* Data pin GPK0[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c index 85f9433d483..1e83f8cf236 100644 --- a/arch/arm/mach-exynos4/setup-sdhci.c +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -35,7 +35,7 @@ void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ ctrl2 = readl(r + S3C_SDHCI_CONTROL2); diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 84c5f258f2d..38a44f9b9da 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -102,8 +102,7 @@ static void __init __fb_init_irq(void) *CSR_FIQ_DISABLE = -1; for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) { - set_irq_chip(irq, &fb_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &fb_chip, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index a921fe92b85..5f1f9867fc7 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -30,7 +30,7 @@ static int cksrc_dc21285_enable(struct clocksource *cs) return 0; } -static int cksrc_dc21285_disable(struct clocksource *cs) +static void cksrc_dc21285_disable(struct clocksource *cs) { *CSR_TIMER2_CNTL = 0; } diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c index de7a5cb5dbe..c3a0abbc904 100644 --- a/arch/arm/mach-footbridge/isa-irq.c +++ b/arch/arm/mach-footbridge/isa-irq.c @@ -151,14 +151,14 @@ void __init isa_init_irq(unsigned int host_irq) if (host_irq != (unsigned int)-1) { for (irq = _ISA_IRQ(0); irq < _ISA_IRQ(8); irq++) { - set_irq_chip(irq, &isa_lo_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &isa_lo_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } for (irq = _ISA_IRQ(8); irq < _ISA_IRQ(16); irq++) { - set_irq_chip(irq, &isa_hi_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &isa_hi_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } @@ -166,7 +166,7 @@ void __init isa_init_irq(unsigned int host_irq) request_resource(&ioport_resource, &pic2_resource); setup_irq(IRQ_ISA_CASCADE, &irq_cascade); - set_irq_chained_handler(host_irq, isa_irq_handler); + irq_set_chained_handler(host_irq, isa_irq_handler); /* * On the NetWinder, don't automatically diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index fa3d333f21e..fdc7ef1391d 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -127,8 +127,8 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type) static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { + unsigned int port = (unsigned int)irq_desc_get_handler_data(desc); unsigned int gpio_irq_no, irq_stat; - unsigned int port = (unsigned int)get_irq_data(irq); irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT); @@ -138,9 +138,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if ((irq_stat & 1) == 0) continue; - BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); - irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, - &irq_desc[gpio_irq_no]); + generic_handle_irq(gpio_irq_no); } } @@ -219,13 +217,13 @@ void __init gemini_gpio_init(void) for (j = GPIO_IRQ_BASE + i * 32; j < GPIO_IRQ_BASE + (i + 1) * 32; j++) { - set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, handle_edge_irq); + irq_set_chip_and_handler(j, &gpio_irq_chip, + handle_edge_irq); set_irq_flags(j, IRQF_VALID); } - set_irq_chained_handler(IRQ_GPIO(i), gpio_irq_handler); - set_irq_data(IRQ_GPIO(i), (void *)i); + irq_set_chained_handler(IRQ_GPIO(i), gpio_irq_handler); + irq_set_handler_data(IRQ_GPIO(i), (void *)i); } BUG_ON(gpiochip_add(&gemini_gpio_chip)); diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index 96bc227dd84..9485a8fdf85 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -81,13 +81,13 @@ void __init gemini_init_irq(void) request_resource(&iomem_resource, &irq_resource); for (i = 0; i < NR_IRQS; i++) { - set_irq_chip(i, &gemini_irq_chip); + irq_set_chip(i, &gemini_irq_chip); if((i >= IRQ_TIMER1 && i <= IRQ_TIMER3) || (i >= IRQ_SERIRQ0 && i <= IRQ_SERIRQ1)) { - set_irq_handler(i, handle_edge_irq); + irq_set_handler(i, handle_edge_irq); mode |= 1 << i; level |= 1 << i; } else { - set_irq_handler(i, handle_level_irq); + irq_set_handler(i, handle_level_irq); } set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index 1f28c90932c..51d4e44ab97 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -199,29 +199,29 @@ void __init h720x_init_irq (void) /* Initialize global IRQ's, fast path */ for (irq = 0; irq < NR_GLBL_IRQS; irq++) { - set_irq_chip(irq, &h720x_global_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &h720x_global_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } /* Initialize multiplexed IRQ's, slow path */ for (irq = IRQ_CHAINED_GPIOA(0) ; irq <= IRQ_CHAINED_GPIOD(31); irq++) { - set_irq_chip(irq, &h720x_gpio_chip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &h720x_gpio_chip, + handle_edge_irq); set_irq_flags(irq, IRQF_VALID ); } - set_irq_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler); - set_irq_chained_handler(IRQ_GPIOB, h720x_gpiob_demux_handler); - set_irq_chained_handler(IRQ_GPIOC, h720x_gpioc_demux_handler); - set_irq_chained_handler(IRQ_GPIOD, h720x_gpiod_demux_handler); + irq_set_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler); + irq_set_chained_handler(IRQ_GPIOB, h720x_gpiob_demux_handler); + irq_set_chained_handler(IRQ_GPIOC, h720x_gpioc_demux_handler); + irq_set_chained_handler(IRQ_GPIOD, h720x_gpiod_demux_handler); #ifdef CONFIG_CPU_H7202 for (irq = IRQ_CHAINED_GPIOE(0) ; irq <= IRQ_CHAINED_GPIOE(31); irq++) { - set_irq_chip(irq, &h720x_gpio_chip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &h720x_gpio_chip, + handle_edge_irq); set_irq_flags(irq, IRQF_VALID ); } - set_irq_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler); + irq_set_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler); #endif /* Enable multiplexed irq's */ diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index ac3f9144237..c37d570b852 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -141,13 +141,18 @@ h7202_timer_interrupt(int irq, void *dev_id) /* * mask multiplexed timer IRQs */ -static void inline mask_timerx_irq(struct irq_data *d) +static void inline __mask_timerx_irq(unsigned int irq) { unsigned int bit; - bit = 2 << ((d->irq == IRQ_TIMER64B) ? 4 : (d->irq - IRQ_TIMER1)); + bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1)); CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) &= ~bit; } +static void inline mask_timerx_irq(struct irq_data *d) +{ + __mask_timerx_irq(d->irq); +} + /* * unmask multiplexed timer IRQs */ @@ -196,12 +201,12 @@ void __init h7202_init_irq (void) for (irq = IRQ_TIMER1; irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) { - mask_timerx_irq(irq); - set_irq_chip(irq, &h7202_timerx_chip); - set_irq_handler(irq, handle_edge_irq); + __mask_timerx_irq(irq); + irq_set_chip_and_handler(irq, &h7202_timerx_chip, + handle_edge_irq); set_irq_flags(irq, IRQF_VALID ); } - set_irq_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler); + irq_set_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler); h720x_init_irq(); } diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5eec099e0c7..56b930a1344 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -255,6 +255,7 @@ config MACH_IMX27_VISSTRIM_M10 bool "Vista Silicon i.MX27 Visstrim_m10" select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_EHCI diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index cb705c28de0..6269053505f 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -34,6 +34,7 @@ #include <mach/mx25.h> #include <mach/imx-uart.h> #include <mach/audmux.h> +#include <mach/esdhc.h> #include "devices-imx25.h" @@ -242,6 +243,11 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, }; +static struct esdhc_platform_data sd1_pdata = { + .cd_gpio = GPIO_SD1CD, + .wp_gpio = -EINVAL, +}; + /* * system init for baseboard usage. Will be called by cpuimx25 init. * @@ -275,7 +281,7 @@ void __init eukrea_mbimxsd25_baseboard_init(void) imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); imx25_add_flexcan1(NULL); - imx25_add_sdhci_esdhc_imx(0, NULL); + imx25_add_sdhci_esdhc_imx(0, &sd1_pdata); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 614b3c00c4a..6e1accf93f8 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -232,10 +232,13 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }; /* MC13783 */ -static struct mc13xxx_platform_data mc13783_pdata __initdata = { - .regulators = mx27_3ds_regulators, - .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), - .flags = MC13XXX_USE_REGULATOR, +static struct mc13xxx_platform_data mc13783_pdata = { + .regulators = { + .regulators = mx27_3ds_regulators, + .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), + + }, + .flags = MC13783_USE_REGULATOR, }; /* SPI */ diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 38c77084b61..4cbce6d0fef 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -263,10 +263,12 @@ static struct mc13xxx_regulator_init_data pcm038_regulators[] = { }; static struct mc13xxx_platform_data pcm038_pmic = { - .regulators = pcm038_regulators, - .num_regulators = ARRAY_SIZE(pcm038_regulators), - .flags = MC13XXX_USE_ADC | MC13XXX_USE_REGULATOR | - MC13XXX_USE_TOUCHSCREEN, + .regulators = { + .regulators = pcm038_regulators, + .num_regulators = ARRAY_SIZE(pcm038_regulators), + }, + .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR | + MC13783_USE_TOUCHSCREEN, }; static struct spi_board_info pcm038_spi_board_info[] __initdata = { diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 769b0f10c83..d701d32a07f 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -13,6 +13,7 @@ config ARCH_INTEGRATOR_CP bool "Support Integrator/CP platform" select ARCH_CINTEGRATOR select ARM_TIMER_SP804 + select PLAT_VERSATILE_CLCD help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index 5f96e1518aa..a08f9b0299d 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1 +1,2 @@ +void integrator_init_early(void); void integrator_reserve(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index b8e884b450d..77315b99568 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -144,12 +144,15 @@ static struct clk_lookup lookups[] = { } }; +void __init integrator_init_early(void) +{ + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); +} + static int __init integrator_init(void) { int i; - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; amba_device_register(d, &iomem_resource); diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 5db574f8ae3..8cbb75a96bd 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -121,6 +121,7 @@ static struct clcd_panel vga = { .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, .connector = IMPD1_CTRL_DISP_VGA, .bpp = 16, .grayscale = 0, @@ -149,6 +150,7 @@ static struct clcd_panel svga = { .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), .connector = IMPD1_CTRL_DISP_VGA, + .caps = CLCD_CAP_5551, .bpp = 16, .grayscale = 0, }; @@ -175,6 +177,7 @@ static struct clcd_panel prospector = { .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, .fixedtimings = 1, .connector = IMPD1_CTRL_DISP_LCD, .bpp = 16, @@ -206,6 +209,7 @@ static struct clcd_panel ltm10c209 = { .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, .fixedtimings = 1, .connector = IMPD1_CTRL_DISP_LCD, .bpp = 16, @@ -279,6 +283,7 @@ static void impd1fb_clcd_remove(struct clcd_fb *fb) static struct clcd_board impd1_clcd_data = { .name = "IM-PD/1", + .caps = CLCD_CAP_5551 | CLCD_CAP_888, .check = clcdfb_check, .decode = clcdfb_decode, .disable = impd1fb_clcd_disable, diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h index 1ab353e2359..445d57adb04 100644 --- a/arch/arm/mach-integrator/include/mach/cm.h +++ b/arch/arm/mach-integrator/include/mach/cm.h @@ -24,9 +24,9 @@ void cm_control(u32, u32); #define CM_CTRL_LCDBIASDN (1 << 10) #define CM_CTRL_LCDMUXSEL_MASK (7 << 11) #define CM_CTRL_LCDMUXSEL_GENLCD (1 << 11) -#define CM_CTRL_LCDMUXSEL_VGA_16BPP (2 << 11) +#define CM_CTRL_LCDMUXSEL_VGA565_TFT555 (2 << 11) #define CM_CTRL_LCDMUXSEL_SHARPLCD (3 << 11) -#define CM_CTRL_LCDMUXSEL_VGA_8421BPP (4 << 11) +#define CM_CTRL_LCDMUXSEL_VGA555_TFT555 (4 << 11) #define CM_CTRL_LCDEN0 (1 << 14) #define CM_CTRL_LCDEN1 (1 << 15) #define CM_CTRL_STATIC1 (1 << 16) diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index b666443b5cb..980803ff348 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -48,6 +48,8 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <plat/fpga-irq.h> + #include "common.h" /* @@ -57,10 +59,10 @@ * Setup a VA for the Integrator interrupt controller (for header #0, * just for now). */ -#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) -#define VA_SC_BASE IO_ADDRESS(INTEGRATOR_SC_BASE) -#define VA_EBI_BASE IO_ADDRESS(INTEGRATOR_EBI_BASE) -#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_IC) +#define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE) +#define VA_SC_BASE __io_address(INTEGRATOR_SC_BASE) +#define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE) +#define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC) /* * Logical Physical @@ -156,27 +158,14 @@ static void __init ap_map_io(void) #define INTEGRATOR_SC_VALID_INT 0x003fffff -static void sc_mask_irq(struct irq_data *d) -{ - writel(1 << d->irq, VA_IC_BASE + IRQ_ENABLE_CLEAR); -} - -static void sc_unmask_irq(struct irq_data *d) -{ - writel(1 << d->irq, VA_IC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip sc_chip = { - .name = "SC", - .irq_ack = sc_mask_irq, - .irq_mask = sc_mask_irq, - .irq_unmask = sc_unmask_irq, +static struct fpga_irq_data sc_irq_data = { + .base = VA_IC_BASE, + .irq_start = 0, + .chip.name = "SC", }; static void __init ap_init_irq(void) { - unsigned int i; - /* Disable all interrupts initially. */ /* Do the core module ones */ writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); @@ -185,13 +174,7 @@ static void __init ap_init_irq(void) writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); - for (i = 0; i < NR_IRQS; i++) { - if (((1 << i) & INTEGRATOR_SC_VALID_INT) != 0) { - set_irq_chip(i, &sc_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - } + fpga_irq_init(-1, INTEGRATOR_SC_VALID_INT, &sc_irq_data); } #ifdef CONFIG_PM @@ -282,7 +265,7 @@ static void ap_flash_exit(void) static void ap_flash_set_vpp(int on) { - unsigned long reg = on ? SC_CTRLS : SC_CTRLC; + void __iomem *reg = on ? SC_CTRLS : SC_CTRLC; writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg); } @@ -499,8 +482,9 @@ static struct sys_timer ap_timer = { MACHINE_START(INTEGRATOR, "ARM-Integrator") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, - .map_io = ap_map_io, .reserve = integrator_reserve, + .map_io = ap_map_io, + .init_early = integrator_init_early, .init_irq = ap_init_irq, .timer = &ap_timer, .init_machine = ap_init, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index e9327da1382..9e3ce26023e 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -42,6 +42,10 @@ #include <asm/hardware/timer-sp.h> +#include <plat/clcd.h> +#include <plat/fpga-irq.h> +#include <plat/sched_clock.h> + #include "common.h" #define INTCP_PA_FLASH_BASE 0x24000000 @@ -49,9 +53,9 @@ #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x40) -#define INTCP_VA_PIC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) -#define INTCP_VA_SIC_BASE IO_ADDRESS(INTEGRATOR_CP_SIC_BASE) +#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40) +#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE) +#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE) #define INTCP_ETH_SIZE 0x10 @@ -139,129 +143,48 @@ static void __init intcp_map_io(void) iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc)); } -#define cic_writel __raw_writel -#define cic_readl __raw_readl -#define pic_writel __raw_writel -#define pic_readl __raw_readl -#define sic_writel __raw_writel -#define sic_readl __raw_readl - -static void cic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_CIC_START; - cic_writel(1 << irq, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); -} - -static void cic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_CIC_START; - cic_writel(1 << irq, INTCP_VA_CIC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip cic_chip = { - .name = "CIC", - .irq_ack = cic_mask_irq, - .irq_mask = cic_mask_irq, - .irq_unmask = cic_unmask_irq, +static struct fpga_irq_data cic_irq_data = { + .base = INTCP_VA_CIC_BASE, + .irq_start = IRQ_CIC_START, + .chip.name = "CIC", }; -static void pic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_PIC_START; - pic_writel(1 << irq, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); -} - -static void pic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_PIC_START; - pic_writel(1 << irq, INTCP_VA_PIC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip pic_chip = { - .name = "PIC", - .irq_ack = pic_mask_irq, - .irq_mask = pic_mask_irq, - .irq_unmask = pic_unmask_irq, +static struct fpga_irq_data pic_irq_data = { + .base = INTCP_VA_PIC_BASE, + .irq_start = IRQ_PIC_START, + .chip.name = "PIC", }; -static void sic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - sic_writel(1 << irq, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); -} - -static void sic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - sic_writel(1 << irq, INTCP_VA_SIC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip sic_chip = { - .name = "SIC", - .irq_ack = sic_mask_irq, - .irq_mask = sic_mask_irq, - .irq_unmask = sic_unmask_irq, +static struct fpga_irq_data sic_irq_data = { + .base = INTCP_VA_SIC_BASE, + .irq_start = IRQ_SIC_START, + .chip.name = "SIC", }; -static void -sic_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - unsigned long status = sic_readl(INTCP_VA_SIC_BASE + IRQ_STATUS); - - if (status == 0) { - do_bad_IRQ(irq, desc); - return; - } - - do { - irq = ffs(status) - 1; - status &= ~(1 << irq); - - irq += IRQ_SIC_START; - - generic_handle_irq(irq); - } while (status); -} - static void __init intcp_init_irq(void) { - unsigned int i; + u32 pic_mask, sic_mask; + + pic_mask = ~((~0u) << (11 - IRQ_PIC_START)); + pic_mask |= (~((~0u) << (29 - 22))) << 22; + sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); /* * Disable all interrupt sources */ - pic_writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); - pic_writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); - - for (i = IRQ_PIC_START; i <= IRQ_PIC_END; i++) { - if (i == 11) - i = 22; - if (i == 29) - break; - set_irq_chip(i, &pic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } + writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); + writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); + writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); - cic_writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); - cic_writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); + fpga_irq_init(-1, pic_mask, &pic_irq_data); - for (i = IRQ_CIC_START; i <= IRQ_CIC_END; i++) { - set_irq_chip(i, &cic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } - - sic_writel(0x00000fff, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); - sic_writel(0x00000fff, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); - - for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) { - set_irq_chip(i, &sic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } + fpga_irq_init(-1, ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)), + &cic_irq_data); - set_irq_chained_handler(IRQ_CP_CPPLDINT, sic_handle_irq); + fpga_irq_init(IRQ_CP_CPPLDINT, sic_mask, &sic_irq_data); } /* @@ -449,43 +372,21 @@ static struct amba_device aaci_device = { /* * CLCD support */ -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, - .grayscale = 0, -}; - /* * Ensure VGA is selected. */ static void cp_clcd_enable(struct clcd_fb *fb) { - u32 val; + struct fb_var_screeninfo *var = &fb->fb.var; + u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2; - if (fb->fb.var.bits_per_pixel <= 8) - val = CM_CTRL_LCDMUXSEL_VGA_8421BPP; + if (var->bits_per_pixel <= 8 || + (var->bits_per_pixel == 16 && var->green.length == 5)) + /* Pseudocolor, RGB555, BGR555 */ + val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555; else if (fb->fb.var.bits_per_pixel <= 16) - val = CM_CTRL_LCDMUXSEL_VGA_16BPP - | CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1 - | CM_CTRL_STATIC1 | CM_CTRL_STATIC2; + /* truecolor RGB565 */ + val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555; else val = 0; /* no idea for this, don't trust the docs */ @@ -498,49 +399,24 @@ static void cp_clcd_enable(struct clcd_fb *fb) CM_CTRL_n24BITEN, val); } -static unsigned long framesize = SZ_1M; - static int cp_clcd_setup(struct clcd_fb *fb) { - dma_addr_t dma; - - fb->panel = &vga; - - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} - -static int cp_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} + fb->panel = versatile_clcd_get_panel("VGA"); + if (!fb->panel) + return -EINVAL; -static void cp_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, SZ_1M); } static struct clcd_board clcd_data = { .name = "Integrator/CP", + .caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888, .check = clcdfb_check, .decode = clcdfb_decode, .enable = cp_clcd_enable, .setup = cp_clcd_setup, - .mmap = cp_clcd_mmap, - .remove = cp_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; static struct amba_device clcd_device = { @@ -565,11 +441,23 @@ static struct amba_device *amba_devs[] __initdata = { &clcd_device, }; +#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28) + +static void __init intcp_init_early(void) +{ + clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups)); + + integrator_init_early(); + +#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK + versatile_sched_clock_init(REFCOUNTER, 24000000); +#endif +} + static void __init intcp_init(void) { int i; - clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups)); platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs)); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { @@ -599,8 +487,9 @@ static struct sys_timer cp_timer = { MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, - .map_io = intcp_map_io, .reserve = integrator_reserve, + .map_io = intcp_map_io, + .init_early = intcp_init_early, .init_irq = intcp_init_irq, .timer = &cp_timer, .init_machine = intcp_init, diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c index a233470dd10..bc739701c30 100644 --- a/arch/arm/mach-iop13xx/irq.c +++ b/arch/arm/mach-iop13xx/irq.c @@ -224,15 +224,15 @@ void __init iop13xx_init_irq(void) for(i = 0; i <= IRQ_IOP13XX_HPI; i++) { if (i < 32) - set_irq_chip(i, &iop13xx_irqchip1); + irq_set_chip(i, &iop13xx_irqchip1); else if (i < 64) - set_irq_chip(i, &iop13xx_irqchip2); + irq_set_chip(i, &iop13xx_irqchip2); else if (i < 96) - set_irq_chip(i, &iop13xx_irqchip3); + irq_set_chip(i, &iop13xx_irqchip3); else - set_irq_chip(i, &iop13xx_irqchip4); + irq_set_chip(i, &iop13xx_irqchip4); - set_irq_handler(i, handle_level_irq); + irq_set_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c index c9c02e3698b..560d5b2dec2 100644 --- a/arch/arm/mach-iop13xx/msi.c +++ b/arch/arm/mach-iop13xx/msi.c @@ -118,7 +118,7 @@ static void iop13xx_msi_handler(unsigned int irq, struct irq_desc *desc) void __init iop13xx_msi_init(void) { - set_irq_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler); + irq_set_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler); } /* @@ -178,7 +178,7 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) if (irq < 0) return irq; - set_irq_msi(irq, desc); + irq_set_msi_desc(irq, desc); msg.address_hi = 0x0; msg.address_lo = IOP13XX_MU_MIMR_PCI; @@ -187,7 +187,7 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) msg.data = (id << IOP13XX_MU_MIMR_CORE_SELECT) | (irq & 0x7f); write_msi_msg(irq, &msg); - set_irq_chip_and_handler(irq, &iop13xx_msi_chip, handle_simple_irq); + irq_set_chip_and_handler(irq, &iop13xx_msi_chip, handle_simple_irq); return 0; } diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 773ea0c95b9..ba3dae352a2 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -225,7 +225,7 @@ static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where) /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atux_pci_status(int clear) @@ -332,7 +332,7 @@ static struct pci_ops iop13xx_atux_ops = { /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atue_pci_status(int clear) diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index d3426a12059..d7ee2789d89 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c @@ -68,8 +68,7 @@ void __init iop32x_init_irq(void) *IOP3XX_PCIIRSR = 0x0f; for (i = 0; i < NR_IRQS; i++) { - set_irq_chip(i, &ext_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &ext_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c index 0ff2f74363a..f7f5d3e451c 100644 --- a/arch/arm/mach-iop33x/irq.c +++ b/arch/arm/mach-iop33x/irq.c @@ -110,8 +110,9 @@ void __init iop33x_init_irq(void) *IOP3XX_PCIIRSR = 0x0f; for (i = 0; i < NR_IRQS; i++) { - set_irq_chip(i, (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, + (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2, + handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } } diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 5fc4e064b65..4068166c899 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -476,8 +476,8 @@ void __init ixp2000_init_irq(void) */ for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { - set_irq_chip(irq, &ixp2000_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &ixp2000_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID); } else set_irq_flags(irq, 0); } @@ -485,21 +485,21 @@ void __init ixp2000_init_irq(void) for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) { if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) & IXP2000_VALID_ERR_IRQ_MASK) { - set_irq_chip(irq, &ixp2000_err_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &ixp2000_err_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID); } else set_irq_flags(irq, 0); } - set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); + irq_set_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { - set_irq_chip(irq, &ixp2000_GPIO_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &ixp2000_GPIO_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID); } - set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler); + irq_set_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler); /* * Enable PCI irqs. The actual PCI[AB] decoding is done in @@ -508,8 +508,8 @@ void __init ixp2000_init_irq(void) */ ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI)); for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) { - set_irq_chip(irq, &ixp2000_pci_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &ixp2000_pci_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID); } } diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 7d90d3f13ee..235638f800e 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -158,13 +158,13 @@ void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigne *board_irq_mask = 0xffffffff; for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) { - set_irq_chip(irq, &ixdp2x00_cpld_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &ixdp2x00_cpld_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID); } /* Hook into PCI interrupt */ - set_irq_chained_handler(IRQ_IXP2000_PCIB, ixdp2x00_irq_handler); + irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x00_irq_handler); } /************************************************************************* diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 34b1b2af37c..84835b20955 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -115,8 +115,8 @@ void __init ixdp2x01_init_irq(void) for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) { if (irq & valid_irq_mask) { - set_irq_chip(irq, &ixdp2x01_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &ixdp2x01_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID); } else { set_irq_flags(irq, 0); @@ -124,7 +124,7 @@ void __init ixdp2x01_init_irq(void) } /* Hook into PCI interrupts */ - set_irq_chained_handler(IRQ_IXP2000_PCIB, ixdp2x01_irq_handler); + irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x01_irq_handler); } diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 9c8a3390321..a1bee33d183 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -289,12 +289,12 @@ static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type) { switch (type) { case IXP23XX_IRQ_LEVEL: - set_irq_chip(irq, &ixp23xx_irq_level_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &ixp23xx_irq_level_chip, + handle_level_irq); break; case IXP23XX_IRQ_EDGE: - set_irq_chip(irq, &ixp23xx_irq_edge_chip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &ixp23xx_irq_edge_chip, + handle_edge_irq); break; } set_irq_flags(irq, IRQF_VALID); @@ -324,12 +324,12 @@ void __init ixp23xx_init_irq(void) } for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) { - set_irq_chip(irq, &ixp23xx_pci_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &ixp23xx_pci_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID); } - set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler); + irq_set_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler); } diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index 181116aa659..8dcba17c81e 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -136,8 +136,8 @@ void __init ixdp2351_init_irq(void) irq++) { if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) { set_irq_flags(irq, IRQF_VALID); - set_irq_handler(irq, handle_level_irq); - set_irq_chip(irq, &ixdp2351_inta_chip); + irq_set_chip_and_handler(irq, &ixdp2351_inta_chip, + handle_level_irq); } } @@ -147,13 +147,13 @@ void __init ixdp2351_init_irq(void) irq++) { if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) { set_irq_flags(irq, IRQF_VALID); - set_irq_handler(irq, handle_level_irq); - set_irq_chip(irq, &ixdp2351_intb_chip); + irq_set_chip_and_handler(irq, &ixdp2351_intb_chip, + handle_level_irq); } } - set_irq_chained_handler(IRQ_IXP23XX_INTA, ixdp2351_inta_handler); - set_irq_chained_handler(IRQ_IXP23XX_INTB, ixdp2351_intb_handler); + irq_set_chained_handler(IRQ_IXP23XX_INTA, ixdp2351_inta_handler); + irq_set_chained_handler(IRQ_IXP23XX_INTB, ixdp2351_intb_handler); } /* diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index 76c61ba7321..8fe0c627326 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) static void __init roadrunner_pci_preinit(void) { - set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW); ixp23xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c index 845e1b50054..162043ff29f 100644 --- a/arch/arm/mach-ixp4xx/avila-pci.c +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -39,10 +39,10 @@ void __init avila_pci_preinit(void) { - set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 9fd894271d5..ed19bc31431 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -252,8 +252,8 @@ void __init ixp4xx_init_irq(void) /* Default to all level triggered */ for(i = 0; i < NR_IRQS; i++) { - set_irq_chip(i, &ixp4xx_irq_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &ixp4xx_irq_chip, + handle_level_irq); set_irq_flags(i, IRQF_VALID); } } diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index b978ea8bd6f..37fda7d6e83 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -32,8 +32,8 @@ void __init coyote_pci_preinit(void) { - set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c index fa70fed462b..c7612010b3f 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-pci.c +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -35,12 +35,12 @@ void __init dsmg600_pci_preinit(void) { - set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTF), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTF), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c index 5a810c93062..44ccde9d487 100644 --- a/arch/arm/mach-ixp4xx/fsg-pci.c +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -32,9 +32,9 @@ void __init fsg_pci_preinit(void) { - set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c index 7e93a0975c4..fc112416887 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-pci.c +++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -29,8 +29,8 @@ void __init gateway7001_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index d0e4861ac03..3e8c0e33b59 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -420,8 +420,8 @@ static void __init gmlr_init(void) gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT); gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN); gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN); - set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); - set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); set_control(CONTROL_HSS0_DTR_N, 1); set_control(CONTROL_HSS1_DTR_N, 1); @@ -441,10 +441,10 @@ static void __init gmlr_init(void) #ifdef CONFIG_PCI static void __init gmlr_pci_preinit(void) { - set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 25d2c333c20..38cc0725dbd 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -43,8 +43,8 @@ */ void __init gtwx5715_pci_preinit(void) { - set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index 1ba165a6eda..58f400417ea 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -36,10 +36,10 @@ void __init ixdp425_pci_preinit(void) { - set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index 4ed7ac61492..e64f6d04148 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -25,8 +25,8 @@ void __init ixdpg425_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index d0cea34cf61..428d1202b79 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -33,11 +33,11 @@ void __init nas100d_pci_preinit(void) { - set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 1eb5a90470b..2e85f76b950 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -32,9 +32,9 @@ void __init nslu2_pci_preinit(void) { - set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c index f3111c6840e..03bdec5140a 100644 --- a/arch/arm/mach-ixp4xx/vulcan-pci.c +++ b/arch/arm/mach-ixp4xx/vulcan-pci.c @@ -38,8 +38,8 @@ void __init vulcan_pci_preinit(void) pr_info("Vulcan PCI: limiting CardBus memory size to %dMB\n", (int)(pci_cardbus_mem_size >> 20)); #endif - set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); - set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c index 9b59ed03b15..17f3cf59a31 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-pci.c +++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -29,8 +29,8 @@ void __init wg302v2_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index cbdb5863d13..05d193a25b2 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -35,14 +35,15 @@ void __init kirkwood_init_irq(void) */ orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0, IRQ_KIRKWOOD_GPIO_START); - set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler); - set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler); - set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler); - set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler); + irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler); + irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler); + irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler); + irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler); orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0, IRQ_KIRKWOOD_GPIO_START + 32); - set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler); - set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler); - set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, gpio_irq_handler); + irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler); + irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler); + irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, + gpio_irq_handler); } diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 0a95063f6d3..17de0bf53c0 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -58,6 +58,12 @@ static struct mvsdio_platform_data sheeva_esata_mvsdio_data = { static struct gpio_led sheevaplug_led_pins[] = { { + .name = "plug:red:misc", + .default_trigger = "none", + .gpio = 46, + .active_low = 1, + }, + { .name = "plug:green:health", .default_trigger = "default-on", .gpio = 49, @@ -80,6 +86,7 @@ static struct platform_device sheevaplug_leds = { static unsigned int sheevaplug_mpp_config[] __initdata = { MPP29_GPIO, /* USB Power Enable */ + MPP46_GPIO, /* LED Red */ MPP49_GPIO, /* LED */ 0 }; diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c index f781164e623..24294b2bc46 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -15,7 +15,7 @@ /**************************************************************************** * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * the QNAP firmware. * Layout as used by QNAP: * 0x00000000-0x00080000 : "U-Boot" diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c index 55fbf7111a5..31e456508a6 100644 --- a/arch/arm/mach-ks8695/gpio.c +++ b/arch/arm/mach-ks8695/gpio.c @@ -80,7 +80,7 @@ int ks8695_gpio_interrupt(unsigned int pin, unsigned int type) local_irq_restore(flags); /* Set IRQ triggering type */ - set_irq_type(gpio_irq[pin], type); + irq_set_irq_type(gpio_irq[pin], type); /* enable interrupt mode */ ks8695_gpio_mode(pin, 0); diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c index 7998ccaa633..a78092dcd6f 100644 --- a/arch/arm/mach-ks8695/irq.c +++ b/arch/arm/mach-ks8695/irq.c @@ -115,12 +115,12 @@ static int ks8695_irq_set_type(struct irq_data *d, unsigned int type) } if (level_triggered) { - set_irq_chip(d->irq, &ks8695_irq_level_chip); - set_irq_handler(d->irq, handle_level_irq); + irq_set_chip_and_handler(d->irq, &ks8695_irq_level_chip, + handle_level_irq); } else { - set_irq_chip(d->irq, &ks8695_irq_edge_chip); - set_irq_handler(d->irq, handle_edge_irq); + irq_set_chip_and_handler(d->irq, &ks8695_irq_edge_chip, + handle_edge_irq); } __raw_writel(ctrl, KS8695_GPIO_VA + KS8695_IOPC); @@ -158,16 +158,18 @@ void __init ks8695_init_irq(void) case KS8695_IRQ_UART_RX: case KS8695_IRQ_COMM_TX: case KS8695_IRQ_COMM_RX: - set_irq_chip(irq, &ks8695_irq_level_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, + &ks8695_irq_level_chip, + handle_level_irq); break; /* Edge-triggered interrupts */ default: /* clear pending bit */ ks8695_irq_ack(irq_get_irq_data(irq)); - set_irq_chip(irq, &ks8695_irq_edge_chip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, + &ks8695_irq_edge_chip, + handle_edge_irq); } set_irq_flags(irq, IRQF_VALID); diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 316ecbf6c58..4eae566dfdc 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -290,7 +290,7 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type) } /* Ok to use the level handler for all types */ - set_irq_handler(d->irq, handle_level_irq); + irq_set_handler(d->irq, handle_level_irq); return 0; } @@ -390,8 +390,8 @@ void __init lpc32xx_init_irq(void) /* Configure supported IRQ's */ for (i = 0; i < NR_IRQS; i++) { - set_irq_chip(i, &lpc32xx_irq_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &lpc32xx_irq_chip, + handle_level_irq); set_irq_flags(i, IRQF_VALID); } @@ -406,8 +406,8 @@ void __init lpc32xx_init_irq(void) __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); /* MIC SUBIRQx interrupts will route handling to the chain handlers */ - set_irq_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler); - set_irq_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler); + irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler); + irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler); /* Initially disable all wake events */ __raw_writel(0, LPC32XX_CLKPWR_P01_ER); diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index e76d41bb705..b9c80597b7b 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -41,7 +41,7 @@ * DRAM clocking and refresh are slightly different for systems with DDR * DRAM or regular SDRAM devices. If SDRAM is used in the system, the * SDRAM will still be accessible in direct-run mode. In DDR based systems, - * a transistion to direct-run mode will stop all DDR accesses (no clocks). + * a transition to direct-run mode will stop all DDR accesses (no clocks). * Because of this, the code to switch power modes and the code to enter * and exit DRAM self-refresh modes must not be executed in DRAM. A small * section of IRAM is used instead for this. diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index ee8b02ed801..7bfb827f3fe 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -10,7 +10,7 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) -#define NR_BUILTIN_GPIO (192) +#define NR_BUILTIN_GPIO IRQ_GPIO_NUM #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 4621067c772..713be155a44 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -8,6 +8,15 @@ #define MFP_DRIVE_MEDIUM (0x2 << 13) #define MFP_DRIVE_FAST (0x3 << 13) +#undef MFP_CFG +#undef MFP_CFG_DRV + +#define MFP_CFG(pin, af) \ + (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM) + +#define MFP_CFG_DRV(pin, af, drv) \ + (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv) + /* GPIO */ #define GPIO0_GPIO MFP_CFG(GPIO0, AF5) #define GPIO1_GPIO MFP_CFG(GPIO1, AF5) diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 4aec493640b..2cbf6df09b8 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -11,8 +11,8 @@ extern void __init mmp2_init_irq(void); extern void mmp2_clear_pmic_int(void); #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> -#include <plat/i2c.h> extern struct pxa_device_desc mmp2_device_uart1; extern struct pxa_device_desc mmp2_device_uart2; diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 1801e420623..a52b3d2f325 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -8,8 +8,8 @@ extern void __init pxa168_init_irq(void); extern void pxa168_clear_keypad_wakeup(void); #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <video/pxa168fb.h> #include <plat/pxa27x_keypad.h> diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index f13c49d6f8d..91be7559139 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -7,8 +7,8 @@ extern struct sys_timer pxa910_timer; extern void __init pxa910_init_irq(void); #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> extern struct pxa_device_desc pxa910_device_uart1; diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c index fa037038e7b..d21c5441a3d 100644 --- a/arch/arm/mach-mmp/irq-mmp2.c +++ b/arch/arm/mach-mmp/irq-mmp2.c @@ -110,9 +110,9 @@ static void init_mux_irq(struct irq_chip *chip, int start, int num) if (chip->irq_ack) chip->irq_ack(d); - set_irq_chip(irq, chip); + irq_set_chip(irq, chip); set_irq_flags(irq, IRQF_VALID); - set_irq_handler(irq, handle_level_irq); + irq_set_handler(irq, handle_level_irq); } } @@ -122,7 +122,7 @@ void __init mmp2_init_icu(void) for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) { icu_mask_irq(irq_get_irq_data(irq)); - set_irq_chip(irq, &icu_irq_chip); + irq_set_chip(irq, &icu_irq_chip); set_irq_flags(irq, IRQF_VALID); switch (irq) { @@ -133,7 +133,7 @@ void __init mmp2_init_icu(void) case IRQ_MMP2_SSP_MUX: break; default: - set_irq_handler(irq, handle_level_irq); + irq_set_handler(irq, handle_level_irq); break; } } @@ -149,9 +149,9 @@ void __init mmp2_init_icu(void) init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15); init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2); - set_irq_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux); - set_irq_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux); - set_irq_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux); - set_irq_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux); - set_irq_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux); + irq_set_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux); + irq_set_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux); + irq_set_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux); + irq_set_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux); + irq_set_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux); } diff --git a/arch/arm/mach-mmp/irq-pxa168.c b/arch/arm/mach-mmp/irq-pxa168.c index f86b450cb93..89706a0d08f 100644 --- a/arch/arm/mach-mmp/irq-pxa168.c +++ b/arch/arm/mach-mmp/irq-pxa168.c @@ -48,8 +48,7 @@ void __init icu_init_irq(void) for (irq = 0; irq < 64; irq++) { icu_mask_irq(irq_get_irq_data(irq)); - set_irq_chip(irq, &icu_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } } diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index aeb9ae23e6c..99833b9485c 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -9,7 +9,7 @@ * 2008-04-11: Jason Chagas <Jason.chagas@marvell.com> * 2008-10-08: Bin Yang <bin.yang@marvell.com> * - * The timers module actually includes three timers, each timer with upto + * The timers module actually includes three timers, each timer with up to * three match comparators. Timer #0 is used here in free-running mode as * the clock source, and match comparator #1 used as clock event device. * diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c index 7ffbd987eb5..805d4ee53f7 100644 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ b/arch/arm/mach-msm/acpuclock-arm11.c @@ -343,7 +343,7 @@ int acpuclk_set_rate(unsigned long rate, int for_power_collapse) } } - /* Set wait states for CPU inbetween frequency changes */ + /* Set wait states for CPU between frequency changes */ reg_clkctl = readl(A11S_CLK_CNTL_ADDR); reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ writel(reg_clkctl, A11S_CLK_CNTL_ADDR); diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 1993721d472..35c7ceeb3f2 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -53,7 +53,7 @@ static void __init msm8960_init_irq(void) */ for (i = GIC_PPI_START; i < GIC_SPI_START; i++) { if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE) - set_irq_handler(i, handle_percpu_irq); + irq_set_handler(i, handle_percpu_irq); } } diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index b3c55f138fc..1163b6fd05d 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -56,7 +56,7 @@ static void __init msm8x60_init_irq(void) */ for (i = GIC_PPI_START; i < GIC_SPI_START; i++) { if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE) - set_irq_handler(i, handle_percpu_irq); + irq_set_handler(i, handle_percpu_irq); } } diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 7f568611547..6a96911b0ad 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -160,10 +160,7 @@ static struct msm_mmc_platform_data qsd8x50_sdc1_data = { static void __init qsd8x50_init_mmc(void) { - if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) - vreg_mmc = vreg_get(NULL, "gp6"); - else - vreg_mmc = vreg_get(NULL, "gp5"); + vreg_mmc = vreg_get(NULL, "gp5"); if (IS_ERR(vreg_mmc)) { pr_err("vreg get for vreg_mmc failed (%ld)\n", diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c index 31117a4499c..87e1d01edec 100644 --- a/arch/arm/mach-msm/board-trout-gpio.c +++ b/arch/arm/mach-msm/board-trout-gpio.c @@ -214,17 +214,17 @@ int __init trout_init_gpio(void) { int i; for(i = TROUT_INT_START; i <= TROUT_INT_END; i++) { - set_irq_chip(i, &trout_gpio_irq_chip); - set_irq_handler(i, handle_edge_irq); + irq_set_chip_and_handler(i, &trout_gpio_irq_chip, + handle_edge_irq); set_irq_flags(i, IRQF_VALID); } for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++) gpiochip_add(&msm_gpio_banks[i].chip); - set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH); - set_irq_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler); - set_irq_wake(MSM_GPIO_TO_INT(17), 1); + irq_set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH); + irq_set_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler); + irq_set_irq_wake(MSM_GPIO_TO_INT(17), 1); return 0; } diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c index 44be8464657..f7a9724788b 100644 --- a/arch/arm/mach-msm/board-trout-mmc.c +++ b/arch/arm/mach-msm/board-trout-mmc.c @@ -174,7 +174,7 @@ int __init trout_init_mmc(unsigned int sys_rev) if (IS_ERR(vreg_sdslot)) return PTR_ERR(vreg_sdslot); - set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1); + irq_set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1); if (!opt_disable_sdcard) msm_add_sdcc(2, &trout_sdslot_data, diff --git a/arch/arm/mach-msm/gpio-v2.c b/arch/arm/mach-msm/gpio-v2.c index 0de19ec74e3..56a964e52ad 100644 --- a/arch/arm/mach-msm/gpio-v2.c +++ b/arch/arm/mach-msm/gpio-v2.c @@ -230,18 +230,18 @@ static void msm_gpio_update_dual_edge_pos(unsigned gpio) val, val2); } -static void msm_gpio_irq_ack(unsigned int irq) +static void msm_gpio_irq_ack(struct irq_data *d) { - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq); + int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); writel(BIT(INTR_STATUS), GPIO_INTR_STATUS(gpio)); if (test_bit(gpio, msm_gpio.dual_edge_irqs)) msm_gpio_update_dual_edge_pos(gpio); } -static void msm_gpio_irq_mask(unsigned int irq) +static void msm_gpio_irq_mask(struct irq_data *d) { - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq); + int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); unsigned long irq_flags; spin_lock_irqsave(&tlmm_lock, irq_flags); @@ -251,9 +251,9 @@ static void msm_gpio_irq_mask(unsigned int irq) spin_unlock_irqrestore(&tlmm_lock, irq_flags); } -static void msm_gpio_irq_unmask(unsigned int irq) +static void msm_gpio_irq_unmask(struct irq_data *d) { - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq); + int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); unsigned long irq_flags; spin_lock_irqsave(&tlmm_lock, irq_flags); @@ -263,9 +263,9 @@ static void msm_gpio_irq_unmask(unsigned int irq) spin_unlock_irqrestore(&tlmm_lock, irq_flags); } -static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type) +static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type) { - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq); + int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); unsigned long irq_flags; uint32_t bits; @@ -275,14 +275,14 @@ static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type) if (flow_type & IRQ_TYPE_EDGE_BOTH) { bits |= BIT(INTR_DECT_CTL); - irq_desc[irq].handle_irq = handle_edge_irq; + __irq_set_handler_locked(d->irq, handle_edge_irq); if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) __set_bit(gpio, msm_gpio.dual_edge_irqs); else __clear_bit(gpio, msm_gpio.dual_edge_irqs); } else { bits &= ~BIT(INTR_DECT_CTL); - irq_desc[irq].handle_irq = handle_level_irq; + __irq_set_handler_locked(d->irq, handle_level_irq); __clear_bit(gpio, msm_gpio.dual_edge_irqs); } @@ -309,6 +309,7 @@ static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type) */ static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc) { + struct irq_data *data = irq_desc_get_irq_data(desc); unsigned long i; for (i = find_first_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS); @@ -318,21 +319,21 @@ static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc) generic_handle_irq(msm_gpio_to_irq(&msm_gpio.gpio_chip, i)); } - desc->chip->ack(irq); + data->chip->irq_ack(data); } -static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on) +static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on) { - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq); + int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); if (on) { if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS)) - set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 1); + irq_set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 1); set_bit(gpio, msm_gpio.wake_irqs); } else { clear_bit(gpio, msm_gpio.wake_irqs); if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS)) - set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 0); + irq_set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 0); } return 0; @@ -340,11 +341,11 @@ static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on) static struct irq_chip msm_gpio_irq_chip = { .name = "msmgpio", - .mask = msm_gpio_irq_mask, - .unmask = msm_gpio_irq_unmask, - .ack = msm_gpio_irq_ack, - .set_type = msm_gpio_irq_set_type, - .set_wake = msm_gpio_irq_set_wake, + .irq_mask = msm_gpio_irq_mask, + .irq_unmask = msm_gpio_irq_unmask, + .irq_ack = msm_gpio_irq_ack, + .irq_set_type = msm_gpio_irq_set_type, + .irq_set_wake = msm_gpio_irq_set_wake, }; static int __devinit msm_gpio_probe(struct platform_device *dev) @@ -361,12 +362,12 @@ static int __devinit msm_gpio_probe(struct platform_device *dev) for (i = 0; i < msm_gpio.gpio_chip.ngpio; ++i) { irq = msm_gpio_to_irq(&msm_gpio.gpio_chip, i); - set_irq_chip(irq, &msm_gpio_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &msm_gpio_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID); } - set_irq_chained_handler(TLMM_SCSS_SUMMARY_IRQ, + irq_set_chained_handler(TLMM_SCSS_SUMMARY_IRQ, msm_summary_irq_handler); return 0; } @@ -378,7 +379,7 @@ static int __devexit msm_gpio_remove(struct platform_device *dev) if (ret < 0) return ret; - set_irq_handler(TLMM_SCSS_SUMMARY_IRQ, NULL); + irq_set_handler(TLMM_SCSS_SUMMARY_IRQ, NULL); return 0; } diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c index 176af9dcb8e..5ea273b00da 100644 --- a/arch/arm/mach-msm/gpio.c +++ b/arch/arm/mach-msm/gpio.c @@ -293,10 +293,10 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type) val = readl(msm_chip->regs.int_edge); if (flow_type & IRQ_TYPE_EDGE_BOTH) { writel(val | mask, msm_chip->regs.int_edge); - irq_desc[d->irq].handle_irq = handle_edge_irq; + __irq_set_handler_locked(d->irq, handle_edge_irq); } else { writel(val & ~mask, msm_chip->regs.int_edge); - irq_desc[d->irq].handle_irq = handle_level_irq; + __irq_set_handler_locked(d->irq, handle_level_irq); } if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { msm_chip->both_edge_detect |= mask; @@ -354,9 +354,9 @@ static int __init msm_init_gpio(void) msm_gpio_chips[j].chip.base + msm_gpio_chips[j].chip.ngpio) j++; - set_irq_chip_data(i, &msm_gpio_chips[j]); - set_irq_chip(i, &msm_gpio_irq_chip); - set_irq_handler(i, handle_edge_irq); + irq_set_chip_data(i, &msm_gpio_chips[j]); + irq_set_chip_and_handler(i, &msm_gpio_irq_chip, + handle_edge_irq); set_irq_flags(i, IRQF_VALID); } @@ -366,10 +366,10 @@ static int __init msm_init_gpio(void) gpiochip_add(&msm_gpio_chips[i].chip); } - set_irq_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler); - set_irq_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler); - set_irq_wake(INT_GPIO_GROUP1, 1); - set_irq_wake(INT_GPIO_GROUP2, 2); + irq_set_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler); + irq_set_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler); + irq_set_irq_wake(INT_GPIO_GROUP1, 1); + irq_set_irq_wake(INT_GPIO_GROUP2, 2); return 0; } diff --git a/arch/arm/mach-msm/irq-vic.c b/arch/arm/mach-msm/irq-vic.c index 68c28bbdc96..1b54f807c2d 100644 --- a/arch/arm/mach-msm/irq-vic.c +++ b/arch/arm/mach-msm/irq-vic.c @@ -313,11 +313,11 @@ static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type) type = msm_irq_shadow_reg[index].int_type; if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { type |= b; - irq_desc[d->irq].handle_irq = handle_edge_irq; + __irq_set_handler_locked(d->irq, handle_edge_irq); } if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) { type &= ~b; - irq_desc[d->irq].handle_irq = handle_level_irq; + __irq_set_handler_locked(d->irq, handle_level_irq); } writel(type, treg); msm_irq_shadow_reg[index].int_type = type; @@ -357,8 +357,7 @@ void __init msm_init_irq(void) writel(3, VIC_INT_MASTEREN); for (n = 0; n < NR_MSM_IRQS; n++) { - set_irq_chip(n, &msm_irq_chip); - set_irq_handler(n, handle_level_irq); + irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq); set_irq_flags(n, IRQF_VALID); } } diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c index 0b27d899f40..ea514be390c 100644 --- a/arch/arm/mach-msm/irq.c +++ b/arch/arm/mach-msm/irq.c @@ -100,11 +100,11 @@ static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type) if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { writel(readl(treg) | b, treg); - irq_desc[d->irq].handle_irq = handle_edge_irq; + __irq_set_handler_locked(d->irq, handle_edge_irq); } if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) { writel(readl(treg) & (~b), treg); - irq_desc[d->irq].handle_irq = handle_level_irq; + __irq_set_handler_locked(d->irq, handle_level_irq); } return 0; } @@ -145,8 +145,7 @@ void __init msm_init_irq(void) writel(1, VIC_INT_MASTEREN); for (n = 0; n < NR_MSM_IRQS; n++) { - set_irq_chip(n, &msm_irq_chip); - set_irq_handler(n, handle_level_irq); + irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq); set_irq_flags(n, IRQF_VALID); } } diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c index cfa808dd489..232f97a0450 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-msm/scm.c @@ -46,7 +46,7 @@ static DEFINE_MUTEX(scm_lock); * @id: command to be executed * @buf: buffer returned from scm_get_command_buffer() * - * An SCM command is layed out in memory as follows: + * An SCM command is laid out in memory as follows: * * ------------------- <--- struct scm_command * | command header | diff --git a/arch/arm/mach-msm/sirc.c b/arch/arm/mach-msm/sirc.c index 11b54c7aeb0..689e78c95f3 100644 --- a/arch/arm/mach-msm/sirc.c +++ b/arch/arm/mach-msm/sirc.c @@ -105,10 +105,10 @@ static int sirc_irq_set_type(struct irq_data *d, unsigned int flow_type) val = readl(sirc_regs.int_type); if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { val |= mask; - irq_desc[d->irq].handle_irq = handle_edge_irq; + __irq_set_handler_locked(d->irq, handle_edge_irq); } else { val &= ~mask; - irq_desc[d->irq].handle_irq = handle_level_irq; + __irq_set_handler_locked(d->irq, handle_level_irq); } writel(val, sirc_regs.int_type); @@ -158,15 +158,14 @@ void __init msm_init_sirc(void) wake_enable = 0; for (i = FIRST_SIRC_IRQ; i < LAST_SIRC_IRQ; i++) { - set_irq_chip(i, &sirc_irq_chip); - set_irq_handler(i, handle_edge_irq); + irq_set_chip_and_handler(i, &sirc_irq_chip, handle_edge_irq); set_irq_flags(i, IRQF_VALID); } for (i = 0; i < ARRAY_SIZE(sirc_reg_table); i++) { - set_irq_chained_handler(sirc_reg_table[i].cascade_irq, + irq_set_chained_handler(sirc_reg_table[i].cascade_irq, sirc_irq_handler); - set_irq_wake(sirc_reg_table[i].cascade_irq, 1); + irq_set_irq_wake(sirc_reg_table[i].cascade_irq, 1); } return; } diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index e7f8e5a4d48..38b95e949d1 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -263,13 +263,13 @@ static void __init msm_timer_init(void) } #ifdef CONFIG_SMP -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER]; /* Use existing clock_event for cpu 0 */ if (!smp_processor_id()) - return; + return 0; writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); @@ -295,6 +295,7 @@ void __cpuinit local_timer_setup(struct clock_event_device *evt) gic_enable_ppi(clock->irq.irq); clockevents_register_device(evt); + return 0; } inline int local_timer_ack(void) diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 08da497c39c..3e24431bb5e 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -38,8 +38,8 @@ void __init mv78xx0_init_irq(void) orion_gpio_init(0, 32, GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0, IRQ_MV78XX0_GPIO_START); - set_irq_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler); - set_irq_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler); - set_irq_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler); - set_irq_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler); + irq_set_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler); + irq_set_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler); + irq_set_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler); + irq_set_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler); } diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index 80761474c0f..2e288b38b4a 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -43,6 +43,7 @@ #include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/audmux.h> +#include <mach/esdhc.h> #include "devices-imx35.h" #include "devices.h" @@ -163,11 +164,14 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { MX35_PAD_SD1_DATA1__ESDHC1_DAT1, MX35_PAD_SD1_DATA2__ESDHC1_DAT2, MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + /* SD1 CD */ + MX35_PAD_LD18__GPIO3_24, }; #define GPIO_LED1 IMX_GPIO_NR(3, 29) #define GPIO_SWITCH1 IMX_GPIO_NR(3, 25) -#define GPIO_LCDPWR (4) +#define GPIO_LCDPWR IMX_GPIO_NR(1, 4) +#define GPIO_SD1CD IMX_GPIO_NR(3, 24) static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) @@ -254,6 +258,11 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, }; +static struct esdhc_platform_data sd1_pdata = { + .cd_gpio = GPIO_SD1CD, + .wp_gpio = -EINVAL, +}; + /* * system init for baseboard usage. Will be called by cpuimx35 init. * @@ -289,7 +298,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void) imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); imx35_add_flexcan1(NULL); - imx35_add_sdhci_esdhc_imx(0, NULL); + imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); @@ -301,7 +310,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void) gpio_request(GPIO_LCDPWR, "LCDPWR"); gpio_direction_output(GPIO_LCDPWR, 1); - gpio_free(GPIO_LCDPWR); i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 544d3e414f5..034be624d35 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -488,10 +488,12 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { }; /* MC13783 */ -static struct mc13xxx_platform_data mc13783_pdata __initdata = { - .regulators = mx31_3ds_regulators, - .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), - .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_TOUCHSCREEN +static struct mc13xxx_platform_data mc13783_pdata = { + .regulators = { + .regulators = mx31_3ds_regulators, + .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), + }, + .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN, }; /* SPI */ diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 4e4b780c481..3d095d69bc6 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -199,12 +199,11 @@ static void __init mx31ads_init_expio(void) __raw_writew(0xFFFF, PBC_INTSTATUS_REG); for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) { - set_irq_chip(i, &expio_irq_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID); } - set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH); - set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler); + irq_set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH); + irq_set_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler); } #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index 6f3692bccb8..3a021b01161 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -268,8 +268,10 @@ static struct mc13783_leds_platform_data moboard_leds = { }; static struct mc13xxx_platform_data moboard_pmic = { - .regulators = moboard_regulators, - .num_regulators = ARRAY_SIZE(moboard_regulators), + .regulators = { + .regulators = moboard_regulators, + .num_regulators = ARRAY_SIZE(moboard_regulators), + }, .leds = &moboard_leds, .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_LED, diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index b3ecfb22d24..036ba1a4704 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -40,6 +40,7 @@ #include <mach/mx3fb.h> #include <mach/ulpi.h> #include <mach/audmux.h> +#include <mach/esdhc.h> #include "devices-imx35.h" #include "devices.h" @@ -217,11 +218,15 @@ static iomux_v3_cfg_t pcm043_pads[] = { MX35_PAD_SD1_DATA1__ESDHC1_DAT1, MX35_PAD_SD1_DATA2__ESDHC1_DAT2, MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */ + MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */ }; #define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31) #define AC97_GPIO_TXD IMX_GPIO_NR(2, 28) #define AC97_GPIO_RESET IMX_GPIO_NR(2, 0) +#define SD1_GPIO_WP IMX_GPIO_NR(2, 23) +#define SD1_GPIO_CD IMX_GPIO_NR(2, 24) static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) { @@ -346,6 +351,11 @@ static int __init pcm043_otg_mode(char *options) } __setup("otg_mode=", pcm043_otg_mode); +static struct esdhc_platform_data sd1_pdata = { + .wp_gpio = SD1_GPIO_WP, + .cd_gpio = SD1_GPIO_CD, +}; + /* * Board specific initialization. */ @@ -395,7 +405,7 @@ static void __init pcm043_init(void) imx35_add_fsl_usb2_udc(&otg_device_pdata); imx35_add_flexcan1(NULL); - imx35_add_sdhci_esdhc_imx(0, NULL); + imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); } static void __init pcm043_timer_init(void) diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c index 2cf390fbd98..47a69cbc31a 100644 --- a/arch/arm/mach-mx3/mach-vpr200.c +++ b/arch/arm/mach-mx3/mach-vpr200.c @@ -257,11 +257,16 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; +static int vpr200_usbh_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, + MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY); +} + /* USB HOST config */ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { - .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY, + .init = vpr200_usbh_init, + .portsc = MXC_EHCI_MODE_SERIAL, }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 83ee08847d4..159340da919 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -165,6 +165,7 @@ config MACH_MX53_LOCO select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS help Include support for MX53 LOCO platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 4f63048be3c..0b9338cec51 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -3,7 +3,7 @@ # # Object file lists. -obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o +obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o obj-$(CONFIG_SOC_IMX50) += mm-mx50.o obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index b2ecd194e76..bea4e4135f9 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -228,13 +228,12 @@ static inline void babbage_fec_reset(void) int ret; /* reset FEC PHY */ - ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset"); + ret = gpio_request_one(BABBAGE_FEC_PHY_RESET, + GPIOF_OUT_INIT_LOW, "fec-phy-reset"); if (ret) { printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); return; } - gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0); - gpio_set_value(BABBAGE_FEC_PHY_RESET, 0); msleep(1); gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); } diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 7b5735c5ea5..2af3f43f74d 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -34,7 +34,7 @@ #include <mach/imx-uart.h> #include <mach/iomux-mx53.h> -#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) +#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6) #define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30) #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) @@ -82,15 +82,14 @@ static inline void mx53_evk_fec_reset(void) int ret; /* reset FEC PHY */ - ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset"); + ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW, + "fec-phy-reset"); if (ret) { printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); return; } - gpio_direction_output(SMD_FEC_PHY_RST, 0); - gpio_set_value(SMD_FEC_PHY_RST, 0); msleep(1); - gpio_set_value(SMD_FEC_PHY_RST, 1); + gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); } static struct fec_platform_data mx53_evk_fec_pdata = { diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 0a18f8d23eb..6206b1191fe 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -36,6 +36,9 @@ #include "crm_regs.h" #include "devices-imx53.h" +#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8) +#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14) +#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15) #define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) static iomux_v3_cfg_t mx53_loco_pads[] = { @@ -180,6 +183,27 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_GPIO_8__GPIO1_8, }; +#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ +{ \ + .gpio = gpio_num, \ + .type = EV_KEY, \ + .code = ev_code, \ + .active_low = act_low, \ + .desc = "btn " descr, \ + .wakeup = wake, \ +} + +static struct gpio_keys_button loco_buttons[] = { + GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0), + GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0), + GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0), +}; + +static const struct gpio_keys_platform_data loco_button_data __initconst = { + .buttons = loco_buttons, + .nbuttons = ARRAY_SIZE(loco_buttons), +}; + static inline void mx53_loco_fec_reset(void) { int ret; @@ -215,6 +239,7 @@ static void __init mx53_loco_board_init(void) imx53_add_imx_i2c(1, &mx53_loco_i2c_data); imx53_add_sdhci_esdhc_imx(0, NULL); imx53_add_sdhci_esdhc_imx(2, NULL); + imx_add_gpio_keys(&loco_button_data); } static void __init mx53_loco_timer_init(void) diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 652ace41382..fdbc05ed551 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -865,6 +865,13 @@ static struct clk aips_tz2_clk = { .disable = _clk_ccgr_disable_inwait, }; +static struct clk gpc_dvfs_clk = { + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable, +}; + static struct clk gpt_32k_clk = { .id = 0, .parent = &ckil_clk, @@ -1448,6 +1455,7 @@ static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk) _REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk) _REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk) + _REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk) }; static struct clk_lookup mx53_lookups[] = { @@ -1511,6 +1519,7 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, clk_enable(&iim_clk); mx51_revision(); clk_disable(&iim_clk); + mx51_display_revision(); /* move usb_phy_clk to 24MHz */ clk_set_parent(&usb_phy1_clk, &osc_clk); diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index df46b5e6085..472bdfab2e5 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -21,6 +21,7 @@ static int cpu_silicon_rev = -1; #define IIM_SREV 0x24 +#define MX50_HW_ADADIG_DIGPROG 0xB0 static int get_mx51_srev(void) { @@ -51,6 +52,26 @@ int mx51_revision(void) } EXPORT_SYMBOL(mx51_revision); +void mx51_display_revision(void) +{ + int rev; + char *srev; + rev = mx51_revision(); + + switch (rev) { + case IMX_CHIP_REVISION_2_0: + srev = IMX_CHIP_REVISION_2_0_STRING; + break; + case IMX_CHIP_REVISION_3_0: + srev = IMX_CHIP_REVISION_3_0_STRING; + break; + default: + srev = IMX_CHIP_REVISION_UNKNOWN_STRING; + } + printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev); +} +EXPORT_SYMBOL(mx51_display_revision); + #ifdef CONFIG_NEON /* @@ -107,6 +128,44 @@ int mx53_revision(void) } EXPORT_SYMBOL(mx53_revision); +static int get_mx50_srev(void) +{ + void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K); + u32 rev; + + if (!anatop) { + cpu_silicon_rev = -EINVAL; + return 0; + } + + rev = readl(anatop + MX50_HW_ADADIG_DIGPROG); + rev &= 0xff; + + iounmap(anatop); + if (rev == 0x0) + return IMX_CHIP_REVISION_1_0; + else if (rev == 0x1) + return IMX_CHIP_REVISION_1_1; + return 0; +} + +/* + * Returns: + * the silicon revision of the cpu + * -EINVAL - not a mx50 + */ +int mx50_revision(void) +{ + if (!cpu_is_mx50()) + return -EINVAL; + + if (cpu_silicon_rev == -1) + cpu_silicon_rev = get_mx50_srev(); + + return cpu_silicon_rev; +} +EXPORT_SYMBOL(mx50_revision); + static int __init post_cpu_init(void) { unsigned int reg; diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c index e83ffadb65f..4a8550529b0 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c @@ -212,7 +212,7 @@ void __init eukrea_mbimx51_baseboard_init(void) gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq"); gpio_direction_input(MBIMX51_TSC2007_GPIO); - set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING); + irq_set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING); i2c_register_board_info(1, mbimx51_i2c_devices, ARRAY_SIZE(mbimx51_i2c_devices)); diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c index c372a437369..e6c1119c20a 100644 --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c @@ -67,6 +67,10 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { MX51_PAD_SD1_DATA1__SD1_DATA1, MX51_PAD_SD1_DATA2__SD1_DATA2, MX51_PAD_SD1_DATA3__SD1_DATA3, + /* SD1 CD */ + _MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | + PAD_CTL_PKE | PAD_CTL_SRE_FAST | + PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), }; #define GPIO_LED1 IMX_GPIO_NR(3, 30) diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index 51a67fc7f0e..d0c7075937c 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -42,7 +42,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <asm/mach-types.h> #include "devices-imx51.h" #include "devices.h" @@ -572,8 +571,10 @@ static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = { static struct mc13xxx_platform_data mx51_efika_mc13892_data = { .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR, - .num_regulators = ARRAY_SIZE(mx51_efika_regulators), - .regulators = mx51_efika_regulators, + .regulators = { + .num_regulators = ARRAY_SIZE(mx51_efika_regulators), + .regulators = mx51_efika_regulators, + }, }; static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c new file mode 100644 index 00000000000..76ae8dc33e0 --- /dev/null +++ b/arch/arm/mach-mx5/system.c @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/platform_device.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include "crm_regs.h" + +/* set cpu low power mode before WFI instruction. This function is called + * mx5 because it can be used for mx50, mx51, and mx53.*/ +void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) +{ + u32 plat_lpc, arm_srpgcr, ccm_clpcr; + u32 empgc0, empgc1; + int stop_mode = 0; + + /* always allow platform to issue a deep sleep mode request */ + plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) & + ~(MXC_CORTEXA8_PLAT_LPC_DSM); + ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK); + arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR); + empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR); + empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR); + + switch (mode) { + case WAIT_CLOCKED: + break; + case WAIT_UNCLOCKED: + ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET; + break; + case WAIT_UNCLOCKED_POWER_OFF: + case STOP_POWER_OFF: + plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM + | MXC_CORTEXA8_PLAT_LPC_DBG_DSM; + if (mode == WAIT_UNCLOCKED_POWER_OFF) { + ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET; + ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY; + ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS; + stop_mode = 0; + } else { + ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; + ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET; + ccm_clpcr |= MXC_CCM_CLPCR_VSTBY; + ccm_clpcr |= MXC_CCM_CLPCR_SBYOS; + stop_mode = 1; + } + arm_srpgcr |= MXC_SRPGCR_PCR; + + if (tzic_enable_wake(1) != 0) + return; + break; + case STOP_POWER_ON: + ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; + break; + default: + printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode); + return; + } + + __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC); + __raw_writel(ccm_clpcr, MXC_CCM_CLPCR); + __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR); + + /* Enable NEON SRPG for all but MX50TO1.0. */ + if (mx50_revision() != IMX_CHIP_REVISION_1_0) + __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR); + + if (stop_mode) { + empgc0 |= MXC_SRPGCR_PCR; + empgc1 |= MXC_SRPGCR_PCR; + + __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR); + __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR); + } +} diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 4f6f174af6c..4522fbb235d 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -22,6 +22,7 @@ config MACH_MX23EVK select SOC_IMX23 select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB default y help @@ -35,6 +36,7 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC select MXS_HAVE_PLATFORM_FLEXCAN + select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB select MXS_OCOTP default y diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index d133c7f3094..c3577ea789a 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -521,6 +521,15 @@ static int clk_misc_init(void) __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET); + /* + * 480 MHz seems too high to be ssp clock source directly, + * so set frac to get a 288 MHz ref_io. + */ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); + reg &= ~BM_CLKCTRL_FRAC_IOFRAC; + reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); + return 0; } @@ -528,6 +537,12 @@ int __init mx23_clocks_init(void) { clk_misc_init(); + /* + * source ssp clock from ref_io than ref_xtal, + * as ref_xtal only provides 24 MHz as maximum. + */ + clk_set_parent(&ssp_clk, &ref_io_clk); + clk_enable(&cpu_clk); clk_enable(&hbus_clk); clk_enable(&xbus_clk); diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 5e489a2b202..5dcc59d5b9e 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -295,11 +295,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ unsigned long diff, parent_rate, calc_rate; \ int i; \ \ - parent_rate = clk_get_rate(clk->parent); \ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ bm_busy = BM_CLKCTRL_##dr##_BUSY; \ \ if (clk->parent == &ref_xtal_clk) { \ + parent_rate = clk_get_rate(clk->parent); \ div = DIV_ROUND_UP(parent_rate, rate); \ if (clk == &cpu_clk) { \ div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \ @@ -309,6 +309,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ if (div == 0 || div > div_max) \ return -EINVAL; \ } else { \ + /* \ + * hack alert: this block modifies clk->parent, too, \ + * so the base to use it the grand parent. \ + */ \ + parent_rate = clk_get_rate(clk->parent->parent); \ rate >>= PARENT_RATE_SHIFT; \ parent_rate >>= PARENT_RATE_SHIFT; \ diff = parent_rate; \ @@ -618,6 +623,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("pll2", NULL, pll2_clk) _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk) _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) + _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk) + _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk) _REGISTER_CLOCK("flexcan.0", NULL, can0_clk) _REGISTER_CLOCK("flexcan.1", NULL, can1_clk) _REGISTER_CLOCK(NULL, "usb0", usb0_clk) @@ -737,6 +744,15 @@ static int clk_misc_init(void) reg |= BM_CLKCTRL_ENET_CLK_OUT_EN; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET); + /* + * 480 MHz seems too high to be ssp clock source directly, + * so set frac0 to get a 288 MHz ref_io0. + */ + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0); + reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC; + reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0); + return 0; } @@ -744,6 +760,13 @@ int __init mx28_clocks_init(void) { clk_misc_init(); + /* + * source ssp clock from ref_io0 than ref_xtal, + * as ref_xtal only provides 24 MHz as maximum. + */ + clk_set_parent(&ssp0_clk, &ref_io0_clk); + clk_set_parent(&ssp1_clk, &ref_io0_clk); + clk_enable(&cpu_clk); clk_enable(&hbus_clk); clk_enable(&xbus_clk); diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index c7e14f4e366..c6f345febd3 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -21,6 +21,10 @@ extern const struct mxs_auart_data mx23_auart_data[] __initconst; #define mx23_add_auart0() mx23_add_auart(0) #define mx23_add_auart1() mx23_add_auart(1) +extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst; +#define mx23_add_mxs_mmc(id, pdata) \ + mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata) + #define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id) struct platform_device *__init mx23_add_mxsfb( diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 9d08555c4cf..c473eddce8c 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -37,6 +37,10 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst; extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst; #define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id]) +extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst; +#define mx28_add_mxs_mmc(id, pdata) \ + mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata) + #define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id) struct platform_device *__init mx28_add_mxsfb( diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index 1451ad060d8..acf9eea124c 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -15,6 +15,9 @@ config MXS_HAVE_PLATFORM_FLEXCAN config MXS_HAVE_PLATFORM_MXS_I2C bool +config MXS_HAVE_PLATFORM_MXS_MMC + bool + config MXS_HAVE_PLATFORM_MXS_PWM bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 0d9bea30b0a..324f2824d38 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -4,5 +4,6 @@ obj-y += platform-dma.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c new file mode 100644 index 00000000000..382dacbeca2 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid) \ + { \ + .id = _id, \ + .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \ + .dma = soc ## _DMA_SSP ## hwid, \ + .irq_err = soc ## _INT_SSP ## hwid ## _ERROR, \ + .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \ + } + +#define mxs_mxs_mmc_data_entry(soc, _id, hwid) \ + [_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid) + + +#ifdef CONFIG_SOC_IMX23 +const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = { + mxs_mxs_mmc_data_entry(MX23, 0, 1), + mxs_mxs_mmc_data_entry(MX23, 1, 2), +}; +#endif + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = { + mxs_mxs_mmc_data_entry(MX28, 0, 0), + mxs_mxs_mmc_data_entry(MX28, 1, 1), +}; +#endif + +struct platform_device *__init mxs_add_mxs_mmc( + const struct mxs_mxs_mmc_data *data, + const struct mxs_mmc_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->dma, + .end = data->dma, + .flags = IORESOURCE_DMA, + }, { + .start = data->irq_err, + .end = data->irq_err, + .flags = IORESOURCE_IRQ, + }, { + .start = data->irq_dma, + .end = data->irq_dma, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("mxs-mmc", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index 56fa2ed1522..2c950fef71a 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -136,7 +136,7 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) { u32 irq_stat; - struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq); + struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq); u32 gpio_irq_no_base = port->virtual_irq_start; desc->irq_data.chip->irq_ack(&desc->irq_data); @@ -265,14 +265,14 @@ int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) for (j = port[i].virtual_irq_start; j < port[i].virtual_irq_start + 32; j++) { - set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, handle_level_irq); + irq_set_chip_and_handler(j, &gpio_irq_chip, + handle_level_irq); set_irq_flags(j, IRQF_VALID); } /* setup one handler for each entry */ - set_irq_chained_handler(port[i].irq, mxs_gpio_irq_handler); - set_irq_data(port[i].irq, &port[i]); + irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler); + irq_set_handler_data(port[i].irq, &port[i]); /* register gpio chip */ port[i].chip.direction_input = mxs_gpio_direction_input; diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c index 0f4c120fc16..23ca9d083b2 100644 --- a/arch/arm/mach-mxs/icoll.c +++ b/arch/arm/mach-mxs/icoll.c @@ -74,8 +74,7 @@ void __init icoll_init_irq(void) mxs_reset_block(icoll_base + HW_ICOLL_CTRL); for (i = 0; i < MXS_INTERNAL_IRQS; i++) { - set_irq_chip(i, &mxs_icoll_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &mxs_icoll_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID); } } diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 71f24484b04..c5137f14c36 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -73,6 +73,19 @@ struct mxs_i2c_data { }; struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data); +/* mmc */ +#include <mach/mmc.h> +struct mxs_mxs_mmc_data { + int id; + resource_size_t iobase; + resource_size_t dma; + resource_size_t irq_err; + resource_size_t irq_dma; +}; +struct platform_device *__init mxs_add_mxs_mmc( + const struct mxs_mxs_mmc_data *data, + const struct mxs_mmc_platform_data *pdata); + /* pwm */ struct platform_device *__init mxs_add_mxs_pwm( resource_size_t iobase, int id); diff --git a/arch/arm/mach-mxs/include/mach/dma.h b/arch/arm/mach-mxs/include/mach/dma.h new file mode 100644 index 00000000000..7f4aeeaba8d --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/dma.h @@ -0,0 +1,26 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MXS_DMA_H__ +#define __MACH_MXS_DMA_H__ + +struct mxs_dma_data { + int chan_irq; +}; + +static inline int mxs_dma_is_apbh(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh"); +} + +static inline int mxs_dma_is_apbx(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx"); +} + +#endif /* __MACH_MXS_DMA_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mmc.h b/arch/arm/mach-mxs/include/mach/mmc.h new file mode 100644 index 00000000000..211547a0556 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/mmc.h @@ -0,0 +1,18 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MXS_MMC_H__ +#define __MACH_MXS_MMC_H__ + +struct mxs_mmc_platform_data { + int wp_gpio; /* write protect pin */ + unsigned int flags; +#define SLOTF_4_BIT_CAPABLE (1 << 0) +#define SLOTF_8_BIT_CAPABLE (1 << 1) +}; +#endif /* __MACH_MXS_MMC_H__ */ diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index a66994f0518..214e5b641bb 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -28,6 +28,8 @@ #define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18) #define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28) +#define MX23EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30) +#define MX23EVK_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29) static const iomux_cfg_t mx23evk_pads[] __initconst = { /* duart */ @@ -73,6 +75,36 @@ static const iomux_cfg_t mx23evk_pads[] __initconst = { MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL, /* backlight control */ MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL, + + /* mmc */ + MX23_PAD_SSP1_DATA0__SSP1_DATA0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_SSP1_DATA1__SSP1_DATA1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_SSP1_DATA2__SSP1_DATA2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_SSP1_DATA3__SSP1_DATA3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_GPMI_D08__SSP1_DATA4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_GPMI_D09__SSP1_DATA5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_GPMI_D10__SSP1_DATA6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_GPMI_D11__SSP1_DATA7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_SSP1_CMD__SSP1_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX23_PAD_SSP1_DETECT__SSP1_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX23_PAD_SSP1_SCK__SSP1_SCK | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* write protect */ + MX23_PAD_PWM4__GPIO_1_30 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* slot power enable */ + MX23_PAD_PWM3__GPIO_1_29 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), }; /* mxsfb (lcdif) */ @@ -101,6 +133,11 @@ static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = { .ld_intf_width = STMLCDIF_24BIT, }; +static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = { + .wp_gpio = MX23EVK_MMC0_WRITE_PROTECT, + .flags = SLOTF_8_BIT_CAPABLE, +}; + static void __init mx23evk_init(void) { int ret; @@ -110,6 +147,13 @@ static void __init mx23evk_init(void) mx23_add_duart(); mx23_add_auart0(); + /* power on mmc slot by writing 0 to the gpio */ + ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT, + "mmc0-slot-power"); + if (ret) + pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); + mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata); + ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable"); if (ret) pr_warn("failed to request gpio lcd-enable: %d\n", ret); diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 08002d02267..bb329b9a260 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -34,6 +34,11 @@ #define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) #define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) +#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12) +#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28) +#define MX28EVK_MMC0_SLOT_POWER MXS_GPIO_NR(3, 28) +#define MX28EVK_MMC1_SLOT_POWER MXS_GPIO_NR(3, 29) + static const iomux_cfg_t mx28evk_pads[] __initconst = { /* duart */ MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, @@ -115,6 +120,65 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL, /* backlight control */ MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL, + /* mmc0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA1__SSP0_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA2__SSP0_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA3__SSP0_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_CMD__SSP0_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* write protect */ + MX28_PAD_SSP1_SCK__GPIO_2_12 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* slot power enable */ + MX28_PAD_PWM3__GPIO_3_28 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* mmc1 */ + MX28_PAD_GPMI_D00__SSP1_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D01__SSP1_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D02__SSP1_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D03__SSP1_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D04__SSP1_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D05__SSP1_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D06__SSP1_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D07__SSP1_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_RDY1__SSP1_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_WRN__SSP1_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* write protect */ + MX28_PAD_GPMI_RESETN__GPIO_0_28 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* slot power enable */ + MX28_PAD_PWM4__GPIO_3_29 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), }; /* fec */ @@ -258,6 +322,18 @@ static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = { .ld_intf_width = STMLCDIF_24BIT, }; +static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = { + { + /* mmc0 */ + .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT, + .flags = SLOTF_8_BIT_CAPABLE, + }, { + /* mmc1 */ + .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT, + .flags = SLOTF_8_BIT_CAPABLE, + }, +}; + static void __init mx28evk_init(void) { int ret; @@ -297,6 +373,19 @@ static void __init mx28evk_init(void) gpio_set_value(MX28EVK_BL_ENABLE, 1); mx28_add_mxsfb(&mx28evk_mxsfb_pdata); + + /* power on mmc slot by writing 0 to the gpio */ + ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT, + "mmc0-slot-power"); + if (ret) + pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + + ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT, + "mmc1-slot-power"); + if (ret) + pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); + mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); } static void __init mx28evk_timer_init(void) diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index fa0b154da67..0fcff47009c 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -45,7 +45,7 @@ static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = { }; #define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3) -static const iomux_cfg_t tx28_fec_pads[] __initconst = { +static const iomux_cfg_t tx28_fec0_pads[] __initconst = { MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE, MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE, MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE, @@ -57,7 +57,20 @@ static const iomux_cfg_t tx28_fec_pads[] __initconst = { MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE, }; -static const struct fec_platform_data tx28_fec_data __initconst = { +static const iomux_cfg_t tx28_fec1_pads[] __initconst = { + MX28_PAD_ENET0_RXD2__ENET1_RXD0, + MX28_PAD_ENET0_RXD3__ENET1_RXD1, + MX28_PAD_ENET0_TXD2__ENET1_TXD0, + MX28_PAD_ENET0_TXD3__ENET1_TXD1, + MX28_PAD_ENET0_COL__ENET1_TX_EN, + MX28_PAD_ENET0_CRS__ENET1_RX_EN, +}; + +static struct fec_platform_data tx28_fec0_data = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static struct fec_platform_data tx28_fec1_data = { .phy = PHY_INTERFACE_MODE_RMII, }; @@ -108,15 +121,15 @@ int __init tx28_add_fec0(void) pr_debug("%s: Deasserting FEC PHY RESET\n", __func__); gpio_set_value(TX28_FEC_PHY_RESET, 1); - ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads, - ARRAY_SIZE(tx28_fec_pads)); + ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads, + ARRAY_SIZE(tx28_fec0_pads)); if (ret) { pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", __func__, ret); goto free_gpios; } - pr_debug("%s: Registering FEC device\n", __func__); - mx28_add_fec(0, &tx28_fec_data); + pr_debug("%s: Registering FEC0 device\n", __func__); + mx28_add_fec(0, &tx28_fec0_data); return 0; free_gpios: @@ -129,3 +142,19 @@ free_gpios: return ret; } + +int __init tx28_add_fec1(void) +{ + int ret; + + ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads, + ARRAY_SIZE(tx28_fec1_pads)); + if (ret) { + pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", + __func__, ret); + return ret; + } + pr_debug("%s: Registering FEC1 device\n", __func__); + mx28_add_fec(1, &tx28_fec1_data); + return 0; +} diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h index df9e1b6e81b..8ed425457d3 100644 --- a/arch/arm/mach-mxs/module-tx28.h +++ b/arch/arm/mach-mxs/module-tx28.h @@ -7,3 +7,4 @@ * Free Software Foundation. */ int __init tx28_add_fec0(void); +int __init tx28_add_fec1(void); diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index 29ffa750fbe..00023b5cf12 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -171,13 +171,13 @@ void __init netx_init_irq(void) vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0); for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) { - set_irq_chip(irq, &netx_hif_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &netx_hif_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID); } writel(NETX_DPMAS_INT_EN_GLB_EN, NETX_DPMAS_INT_EN); - set_irq_chained_handler(NETX_IRQ_HIF, netx_hif_demux_handler); + irq_set_chained_handler(NETX_IRQ_HIF, netx_hif_demux_handler); } static int __init netx_init(void) diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index 0c0d5248c36..e27687d5350 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -107,8 +107,8 @@ void __init board_a9m9750dev_init_irq(void) __func__); for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) { - set_irq_chip(i, &a9m9750dev_fpga_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &a9m9750dev_fpga_chip, + handle_level_irq); set_irq_flags(i, IRQF_VALID); } @@ -118,8 +118,8 @@ void __init board_a9m9750dev_init_irq(void) REGSET(eic, SYS_EIC, LVEDG, LEVEL); __raw_writel(eic, SYS_EIC(2)); - set_irq_chained_handler(IRQ_NS9XXX_EXT2, - a9m9750dev_fpga_demux_handler); + irq_set_chained_handler(IRQ_NS9XXX_EXT2, + a9m9750dev_fpga_demux_handler); } void __init board_a9m9750dev_init_machine(void) diff --git a/arch/arm/mach-ns9xxx/include/mach/board.h b/arch/arm/mach-ns9xxx/include/mach/board.h index f7e9196eb9a..19ca6de46a4 100644 --- a/arch/arm/mach-ns9xxx/include/mach/board.h +++ b/arch/arm/mach-ns9xxx/include/mach/board.h @@ -14,12 +14,10 @@ #include <asm/mach-types.h> #define board_is_a9m9750dev() (0 \ - || machine_is_cc9p9360dev() \ || machine_is_cc9p9750dev() \ ) #define board_is_a9mvali() (0 \ - || machine_is_cc9p9360val() \ || machine_is_cc9p9750val() \ ) diff --git a/arch/arm/mach-ns9xxx/include/mach/module.h b/arch/arm/mach-ns9xxx/include/mach/module.h index f851a6b7da6..628e9752589 100644 --- a/arch/arm/mach-ns9xxx/include/mach/module.h +++ b/arch/arm/mach-ns9xxx/include/mach/module.h @@ -18,7 +18,6 @@ ) #define module_is_cc9c() (0 \ - || machine_is_cc9c() \ ) #define module_is_cc9p9210() (0 \ @@ -32,21 +31,17 @@ ) #define module_is_cc9p9360() (0 \ - || machine_is_a9m9360() \ || machine_is_cc9p9360dev() \ || machine_is_cc9p9360js() \ - || machine_is_cc9p9360val() \ ) #define module_is_cc9p9750() (0 \ || machine_is_a9m9750() \ - || machine_is_cc9p9750dev() \ || machine_is_cc9p9750js() \ || machine_is_cc9p9750val() \ ) #define module_is_ccw9c() (0 \ - || machine_is_ccw9c() \ ) #define module_is_inc20otter() (0 \ diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index 389fa5c669d..37ab0a2b83a 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -31,17 +31,11 @@ static void ns9xxx_mask_irq(struct irq_data *d) __raw_writel(ic, SYS_IC(prio / 4)); } -static void ns9xxx_ack_irq(struct irq_data *d) +static void ns9xxx_eoi_irq(struct irq_data *d) { __raw_writel(0, SYS_ISRADDR); } -static void ns9xxx_maskack_irq(struct irq_data *d) -{ - ns9xxx_mask_irq(d); - ns9xxx_ack_irq(d); -} - static void ns9xxx_unmask_irq(struct irq_data *d) { /* XXX: better use cpp symbols */ @@ -52,56 +46,11 @@ static void ns9xxx_unmask_irq(struct irq_data *d) } static struct irq_chip ns9xxx_chip = { - .irq_ack = ns9xxx_ack_irq, + .irq_eoi = ns9xxx_eoi_irq, .irq_mask = ns9xxx_mask_irq, - .irq_mask_ack = ns9xxx_maskack_irq, .irq_unmask = ns9xxx_unmask_irq, }; -#if 0 -#define handle_irq handle_level_irq -#else -static void handle_prio_irq(unsigned int irq, struct irq_desc *desc) -{ - struct irqaction *action; - irqreturn_t action_ret; - - raw_spin_lock(&desc->lock); - - BUG_ON(desc->status & IRQ_INPROGRESS); - - desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); - kstat_incr_irqs_this_cpu(irq, desc); - - action = desc->action; - if (unlikely(!action || (desc->status & IRQ_DISABLED))) - goto out_mask; - - desc->status |= IRQ_INPROGRESS; - raw_spin_unlock(&desc->lock); - - action_ret = handle_IRQ_event(irq, action); - - /* XXX: There is no direct way to access noirqdebug, so check - * unconditionally for spurious irqs... - * Maybe this function should go to kernel/irq/chip.c? */ - note_interrupt(irq, desc, action_ret); - - raw_spin_lock(&desc->lock); - desc->status &= ~IRQ_INPROGRESS; - - if (desc->status & IRQ_DISABLED) -out_mask: - desc->irq_data.chip->irq_mask(&desc->irq_data); - - /* ack unconditionally to unmask lower prio irqs */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - - raw_spin_unlock(&desc->lock); -} -#define handle_irq handle_prio_irq -#endif - void __init ns9xxx_init_irq(void) { int i; @@ -118,8 +67,8 @@ void __init ns9xxx_init_irq(void) __raw_writel(prio2irq(i), SYS_IVA(i)); for (i = 0; i <= 31; ++i) { - set_irq_chip(i, &ns9xxx_chip); - set_irq_handler(i, handle_irq); + irq_set_chip_and_handler(i, &ns9xxx_chip, handle_fasteoi_irq); set_irq_flags(i, IRQF_VALID); + irq_set_status_flags(i, IRQ_LEVEL); } } diff --git a/arch/arm/mach-nuc93x/irq.c b/arch/arm/mach-nuc93x/irq.c index 1f8a05a2283..aa279f23e34 100644 --- a/arch/arm/mach-nuc93x/irq.c +++ b/arch/arm/mach-nuc93x/irq.c @@ -59,8 +59,8 @@ void __init nuc93x_init_irq(void) __raw_writel(0xFFFFFFFE, REG_AIC_MDCR); for (irqno = IRQ_WDT; irqno <= NR_IRQS; irqno++) { - set_irq_chip(irqno, &nuc93x_irq_chip); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &nuc93x_irq_chip, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } } diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 927d5a18176..c1c5fb6a5b4 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -79,7 +79,7 @@ /* - * Register useage + * Register usage * r8 - temporary * r9 - the driver buffer * r10 - temporary diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 7c5e2112c77..e68dfde1918 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -276,7 +276,7 @@ static void __init osk_init_cf(void) return; } /* the CF I/O IRQ is really active-low */ - set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } static void __init osk_init_irq(void) @@ -482,7 +482,7 @@ static void __init osk_mistral_init(void) omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ gpio_request(4, "ts_int"); gpio_direction_input(4); - set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); @@ -500,7 +500,7 @@ static void __init osk_mistral_init(void) int irq = gpio_to_irq(OMAP_MPUIO(2)); gpio_direction_input(OMAP_MPUIO(2)); - set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); #ifdef CONFIG_PM /* share the IRQ in case someone wants to use the * button for more than wakeup from system sleep. diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index d7bbbe721a7..45f01d2c3a7 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -256,12 +256,12 @@ palmz71_powercable(int irq, void *dev_id) { if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) { printk(KERN_INFO "PM: Power cable connected\n"); - set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), + IRQ_TYPE_EDGE_FALLING); } else { printk(KERN_INFO "PM: Power cable disconnected\n"); - set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), + IRQ_TYPE_EDGE_RISING); } return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index d41fe2d0616..0ad781db4e6 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -399,7 +399,7 @@ static void __init omap_sx1_init(void) sx1_mmc_init(); /* turn on USB power */ - /* sx1_setusbpower(1); cant do it here because i2c is not ready */ + /* sx1_setusbpower(1); can't do it here because i2c is not ready */ gpio_request(1, "A_IRDA_OFF"); gpio_request(11, "A_SWITCH"); gpio_request(15, "A_USB_ON"); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index bdc0ac8dc21..65d24204937 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -279,10 +279,10 @@ static void __init voiceblue_init(void) gpio_request(13, "16C554 irq"); gpio_request(14, "16C554 irq"); gpio_request(15, "16C554 irq"); - set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index b0f4c231595..36f26c3fa25 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {} * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 0ace7998aaa..cddbf8b089c 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -156,17 +156,17 @@ void omap1510_fpga_init_irq(void) * The touchscreen interrupt is level-sensitive, so * we'll use the regular mask_ack routine for it. */ - set_irq_chip(i, &omap_fpga_irq_ack); + irq_set_chip(i, &omap_fpga_irq_ack); } else { /* * All FPGA interrupts except the touchscreen are * edge-sensitive, so we won't mask them. */ - set_irq_chip(i, &omap_fpga_irq); + irq_set_chip(i, &omap_fpga_irq); } - set_irq_handler(i, handle_edge_irq); + irq_set_handler(i, handle_edge_irq); set_irq_flags(i, IRQF_VALID); } @@ -183,6 +183,6 @@ void omap1510_fpga_init_irq(void) return; } gpio_direction_input(13); - set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); + irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); + irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index 7a2df29400c..23eed0035ed 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -31,7 +31,7 @@ #endif /* - * These are the offsets from the begining of the fiq_buffer. They are put here + * These are the offsets from the beginning of the fiq_buffer. They are put here * since the buffer and header need to be accessed by drivers servicing devices * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. */ diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 731dd33bff5..5d3da7a63af 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -230,8 +230,8 @@ void __init omap_init_irq(void) irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j); omap_irq_set_cfg(j, 0, 0, irq_trigger); - set_irq_chip(j, &omap_irq_chip); - set_irq_handler(j, handle_level_irq); + irq_set_chip_and_handler(j, &omap_irq_chip, + handle_level_irq); set_irq_flags(j, IRQF_VALID); } } diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index eeab35dea07..b997a35830f 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -44,6 +44,7 @@ config ARCH_OMAP4 depends on ARCH_OMAP2PLUS select CPU_V7 select ARM_GIC + select LOCAL_TIMERS if SMP select PL310_ERRATA_588369 select PL310_ERRATA_727915 select ARM_ERRATA_720789 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a45cd640968..512b1520445 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -68,7 +68,7 @@ obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 -AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a +AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) ifeq ($(CONFIG_PM_VERBOSE),y) CFLAGS_pm_bus.o += -DDEBUG diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index c06eb423c4e..9afd087cc29 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -307,9 +307,6 @@ static struct omap_dss_board_info sdp3430_dss_data = { .default_device = &sdp3430_lcd_device, }; -static struct regulator_consumer_supply sdp3430_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); - static struct omap_board_config_kernel sdp3430_config[] __initdata = { }; @@ -398,12 +395,13 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { }; static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss"), + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), }; /* VPLL2 for digital video outputs */ static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = { diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 333ceb2c8fb..56702c5e577 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -36,6 +36,7 @@ #include <plat/usb.h> #include <plat/mmc.h> #include <plat/omap4-keypad.h> +#include <plat/display.h> #include "mux.h" #include "hsmmc.h" @@ -47,6 +48,8 @@ #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 +#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ static const int sdp4430_keymap[] = { KEY(0, 0, KEY_E), @@ -547,6 +550,12 @@ static struct regulator_init_data sdp4430_vusb = { }, }; +static struct regulator_init_data sdp4430_clk32kg = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + static struct twl4030_platform_data sdp4430_twldata = { .irq_base = TWL6030_IRQ_BASE, .irq_end = TWL6030_IRQ_END, @@ -562,6 +571,7 @@ static struct twl4030_platform_data sdp4430_twldata = { .vaux1 = &sdp4430_vaux1, .vaux2 = &sdp4430_vaux2, .vaux3 = &sdp4430_vaux3, + .clk32kg = &sdp4430_clk32kg, .usb = &omap4_usbphy_data }; @@ -621,6 +631,76 @@ static void __init omap_sfh7741prox_init(void) } } +static void sdp4430_hdmi_mux_init(void) +{ + /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ + omap_mux_init_signal("hdmi_hpd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_cec", + OMAP_PIN_INPUT_PULLUP); + /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ + omap_mux_init_signal("hdmi_ddc_scl", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_ddc_sda", + OMAP_PIN_INPUT_PULLUP); +} + +static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) +{ + int status; + + status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, + "hdmi_gpio_hpd"); + if (status) { + pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); + return status; + } + status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, + "hdmi_gpio_ls_oe"); + if (status) { + pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); + goto error1; + } + + return 0; + +error1: + gpio_free(HDMI_GPIO_HPD); + + return status; +} + +static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) +{ + gpio_free(HDMI_GPIO_LS_OE); + gpio_free(HDMI_GPIO_HPD); +} + +static struct omap_dss_device sdp4430_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .platform_enable = sdp4430_panel_enable_hdmi, + .platform_disable = sdp4430_panel_disable_hdmi, + .channel = OMAP_DSS_CHANNEL_DIGIT, +}; + +static struct omap_dss_device *sdp4430_dss_devices[] = { + &sdp4430_hdmi_device, +}; + +static struct omap_dss_board_info sdp4430_dss_data = { + .num_devices = ARRAY_SIZE(sdp4430_dss_devices), + .devices = sdp4430_dss_devices, + .default_device = &sdp4430_hdmi_device, +}; + +void omap_4430sdp_display_init(void) +{ + sdp4430_hdmi_mux_init(); + omap_display_init(&sdp4430_dss_data); +} + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -729,6 +809,8 @@ static void __init omap_4430sdp_init(void) status = omap4_keyboard_init(&sdp4430_keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); + + omap_4430sdp_display_init(); } static void __init omap_4430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 7b5647954c1..02a12b41c0f 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -488,7 +488,7 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = { }; static struct regulator_consumer_supply cm_t35_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); static struct regulator_consumer_supply cm_t35_vdvi_supply = REGULATOR_SUPPLY("vdvi", "omapdss"); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index aa27483c493..65f9fde2c56 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -196,7 +196,7 @@ static struct omap_dss_board_info devkit8000_dss_data = { }; static struct regulator_consumer_supply devkit8000_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), @@ -277,8 +277,10 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { .setup = devkit8000_twl_gpio_setup, }; -static struct regulator_consumer_supply devkit8000_vpll1_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data devkit8000_vmmc1 = { @@ -319,8 +321,8 @@ static struct regulator_init_data devkit8000_vpll1 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vpll1_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll1_supplies), + .consumer_supplies = devkit8000_vpll1_supplies, }; /* VAUX4 for ads7846 and nubs */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index d3199b4ecdb..34cf982b967 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -485,8 +485,10 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, }; -static struct regulator_consumer_supply igep2_vpll2_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply igep2_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static struct regulator_init_data igep2_vpll2 = { .constraints = { @@ -499,8 +501,8 @@ static struct regulator_init_data igep2_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies), + .consumer_supplies = igep2_vpll2_supplies, }; static void __init igep2_display_init(void) @@ -694,7 +696,7 @@ static void __init igep2_init(void) igep2_init_smsc911x(); /* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep2_wlan_bt_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index b10db0e6ee6..2cf86c3cb1a 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -440,7 +440,7 @@ static void __init igep3_init(void) igep3_leds_init(); /* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep3_wifi_bt_init(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7640c054f43..33007fd4a08 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -232,10 +232,12 @@ static struct omap_dss_board_info beagle_dss_data = { }; static struct regulator_consumer_supply beagle_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); -static struct regulator_consumer_supply beagle_vdvi_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply beagle_vdvi_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static void __init beagle_display_init(void) { @@ -422,8 +424,8 @@ static struct regulator_init_data beagle_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdvi_supply, + .num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies), + .consumer_supplies = beagle_vdvi_supplies, }; static struct twl4030_usb_data beagle_usb_data = { diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 0fa2c7b208b..5a1a916e5cc 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -542,7 +542,7 @@ static struct twl4030_codec_data omap3evm_codec_data = { }; static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_evm_vdac = { @@ -560,8 +560,10 @@ static struct regulator_init_data omap3_evm_vdac = { }; /* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_evm_vpll2_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static struct regulator_init_data omap3_evm_vpll2 = { .constraints = { @@ -573,8 +575,8 @@ static struct regulator_init_data omap3_evm_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_evm_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies), + .consumer_supplies = omap3_evm_vpll2_supplies, }; /* ads7846 on SPI */ diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2e5dc21e347..07dba888f45 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -342,11 +342,12 @@ static struct regulator_consumer_supply pandora_vmmc3_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"); static struct regulator_consumer_supply pandora_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; static struct regulator_consumer_supply pandora_vcc_lcd_supply = diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 8ebdbc38b9d..a6e0b9161c9 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -439,7 +439,7 @@ static struct twl4030_codec_data omap3stalker_codec_data = { }; static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_stalker_vdac = { @@ -457,8 +457,10 @@ static struct regulator_init_data omap3_stalker_vdac = { }; /* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_stalker_vpll2_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static struct regulator_init_data omap3_stalker_vpll2 = { .constraints = { @@ -471,8 +473,8 @@ static struct regulator_init_data omap3_stalker_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_stalker_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies), + .consumer_supplies = omap3_stalker_vpll2_supplies, }; static struct twl4030_platform_data omap3stalker_twldata = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 0f4d8a762a7..f3a7b101191 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -34,11 +34,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <plat/display.h> #include <plat/board.h> #include <plat/common.h> #include <plat/usb.h> #include <plat/mmc.h> +#include <plat/panel-generic-dpi.h> #include "timer-gp.h" #include "hsmmc.h" @@ -49,6 +51,8 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 +#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -281,19 +285,6 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct regulator_init_data omap4_panda_vaux1 = { - .constraints = { - .min_uV = 1000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - static struct regulator_init_data omap4_panda_vaux2 = { .constraints = { .min_uV = 1200000, @@ -349,19 +340,6 @@ static struct regulator_init_data omap4_panda_vpp = { }, }; -static struct regulator_init_data omap4_panda_vusim = { - .constraints = { - .min_uV = 1200000, - .max_uV = 2900000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - static struct regulator_init_data omap4_panda_vana = { .constraints = { .min_uV = 2100000, @@ -407,6 +385,12 @@ static struct regulator_init_data omap4_panda_vusb = { }, }; +static struct regulator_init_data omap4_panda_clk32kg = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + static struct twl4030_platform_data omap4_panda_twldata = { .irq_base = TWL6030_IRQ_BASE, .irq_end = TWL6030_IRQ_END, @@ -414,14 +398,13 @@ static struct twl4030_platform_data omap4_panda_twldata = { /* Regulators */ .vmmc = &omap4_panda_vmmc, .vpp = &omap4_panda_vpp, - .vusim = &omap4_panda_vusim, .vana = &omap4_panda_vana, .vcxio = &omap4_panda_vcxio, .vdac = &omap4_panda_vdac, .vusb = &omap4_panda_vusb, - .vaux1 = &omap4_panda_vaux1, .vaux2 = &omap4_panda_vaux2, .vaux3 = &omap4_panda_vaux3, + .clk32kg = &omap4_panda_clk32kg, .usb = &omap4_usbphy_data, }; @@ -433,6 +416,17 @@ static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = { .platform_data = &omap4_panda_twldata, }, }; + +/* + * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM + * is connected as I2C slave device, and can be accessed at address 0x50 + */ +static struct i2c_board_info __initdata panda_i2c_eeprom[] = { + { + I2C_BOARD_INFO("eeprom", 0x50), + }, +}; + static int __init omap4_panda_i2c_init(void) { /* @@ -442,7 +436,12 @@ static int __init omap4_panda_i2c_init(void) omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo, ARRAY_SIZE(omap4_panda_i2c_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); + /* + * Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz + */ + omap_register_i2c_bus(3, 100, panda_i2c_eeprom, + ARRAY_SIZE(panda_i2c_eeprom)); omap_register_i2c_bus(4, 400, NULL, 0); return 0; } @@ -462,6 +461,64 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + /* gpio 0 - TFP410 PD */ + OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3), + /* dispc2_data23 */ + OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data22 */ + OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data21 */ + OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data20 */ + OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data19 */ + OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data18 */ + OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data15 */ + OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data14 */ + OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data13 */ + OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data12 */ + OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data11 */ + OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data10 */ + OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data9 */ + OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data16 */ + OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data17 */ + OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_hsync */ + OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_pclk */ + OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_vsync */ + OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_de */ + OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data8 */ + OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data7 */ + OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data6 */ + OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data5 */ + OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data4 */ + OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data3 */ + OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data2 */ + OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data1 */ + OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data0 */ + OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), { .reg_offset = OMAP_MUX_TERMINATOR }, }; @@ -535,6 +592,128 @@ static inline void board_serial_init(void) } #endif +/* Display DVI */ +#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 + +static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev) +{ + gpio_set_value(dssdev->reset_gpio, 1); + return 0; +} + +static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev) +{ + gpio_set_value(dssdev->reset_gpio, 0); +} + +/* Using generic display panel */ +static struct panel_generic_dpi_data omap4_dvi_panel = { + .name = "generic", + .platform_enable = omap4_panda_enable_dvi, + .platform_disable = omap4_panda_disable_dvi, +}; + +struct omap_dss_device omap4_panda_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "generic_dpi_panel", + .data = &omap4_dvi_panel, + .phy.dpi.data_lines = 24, + .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +int __init omap4_panda_dvi_init(void) +{ + int r; + + /* Requesting TFP410 DVI GPIO and disabling it, at bootup */ + r = gpio_request_one(omap4_panda_dvi_device.reset_gpio, + GPIOF_OUT_INIT_LOW, "DVI PD"); + if (r) + pr_err("Failed to get DVI powerdown GPIO\n"); + + return r; +} + + +static void omap4_panda_hdmi_mux_init(void) +{ + /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ + omap_mux_init_signal("hdmi_hpd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_cec", + OMAP_PIN_INPUT_PULLUP); + /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ + omap_mux_init_signal("hdmi_ddc_scl", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_ddc_sda", + OMAP_PIN_INPUT_PULLUP); +} + +static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) +{ + int status; + + status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, + "hdmi_gpio_hpd"); + if (status) { + pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); + return status; + } + status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, + "hdmi_gpio_ls_oe"); + if (status) { + pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); + goto error1; + } + + return 0; + +error1: + gpio_free(HDMI_GPIO_HPD); + + return status; +} + +static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) +{ + gpio_free(HDMI_GPIO_LS_OE); + gpio_free(HDMI_GPIO_HPD); +} + +static struct omap_dss_device omap4_panda_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .platform_enable = omap4_panda_panel_enable_hdmi, + .platform_disable = omap4_panda_panel_disable_hdmi, + .channel = OMAP_DSS_CHANNEL_DIGIT, +}; + +static struct omap_dss_device *omap4_panda_dss_devices[] = { + &omap4_panda_dvi_device, + &omap4_panda_hdmi_device, +}; + +static struct omap_dss_board_info omap4_panda_dss_data = { + .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), + .devices = omap4_panda_dss_devices, + .default_device = &omap4_panda_dvi_device, +}; + +void omap4_panda_display_init(void) +{ + int r; + + r = omap4_panda_dvi_init(); + if (r) + pr_err("error initializing panda DVI\n"); + + omap4_panda_hdmi_mux_init(); + omap_display_init(&omap4_panda_dss_data); +} + static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; @@ -553,6 +732,7 @@ static void __init omap4_panda_init(void) omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); usb_musb_init(&musb_board_data); + omap4_panda_display_init(); } static void __init omap4_panda_map_io(void) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index d0961945c65..59ca33326b8 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -28,6 +28,8 @@ #include <linux/platform_device.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/spi/spi.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -41,10 +43,14 @@ #include <plat/board.h> #include <plat/common.h> +#include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <mach/gpio.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> +#include <plat/mcspi.h> +#include <plat/mux.h> #include <plat/usb.h> #include "mux.h" @@ -68,8 +74,6 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <plat/mcspi.h> -#include <linux/spi/spi.h> #include <linux/spi/ads7846.h> static struct omap2_mcspi_device_config ads7846_mcspi_config = { @@ -94,16 +98,32 @@ static struct ads7846_platform_data ads7846_config = { .keep_vref_on = 1, }; -static struct spi_board_info overo_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), - .platform_data = &ads7846_config, - } +/* fixed regulator for ads7846 */ +static struct regulator_consumer_supply ads7846_supply = + REGULATOR_SUPPLY("vcc", "spi1.0"); + +static struct regulator_init_data vads7846_regulator = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ads7846_supply, +}; + +static struct fixed_voltage_config vads7846 = { + .supply_name = "vads7846", + .microvolts = 3300000, /* 3.3V */ + .gpio = -EINVAL, + .startup_delay = 0, + .init_data = &vads7846_regulator, +}; + +static struct platform_device vads7846_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vads7846, + }, }; static void __init overo_ads7846_init(void) @@ -116,8 +136,7 @@ static void __init overo_ads7846_init(void) return; } - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); + platform_device_register(&vads7846_device); } #else @@ -233,6 +252,137 @@ static inline void __init overo_init_smsc911x(void) static inline void __init overo_init_smsc911x(void) { return; } #endif +/* DSS */ +static int lcd_enabled; +static int dvi_enabled; + +#define OVERO_GPIO_LCD_EN 144 +#define OVERO_GPIO_LCD_BL 145 + +static void __init overo_display_init(void) +{ + if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && + (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) + gpio_export(OVERO_GPIO_LCD_EN, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_LCD_EN\n"); + + if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && + (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) + gpio_export(OVERO_GPIO_LCD_BL, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_LCD_BL\n"); +} + +static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + dvi_enabled = 1; + + return 0; +} + +static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) +{ + dvi_enabled = 0; +} + +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = overo_panel_enable_dvi, + .platform_disable = overo_panel_disable_dvi, +}; + +static struct omap_dss_device overo_dvi_device = { + .name = "dvi", + .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, + .phy.dpi.data_lines = 24, +}; + +static struct omap_dss_device overo_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +static int overo_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + + gpio_set_value(OVERO_GPIO_LCD_EN, 1); + gpio_set_value(OVERO_GPIO_LCD_BL, 1); + lcd_enabled = 1; + return 0; +} + +static void overo_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + gpio_set_value(OVERO_GPIO_LCD_EN, 0); + gpio_set_value(OVERO_GPIO_LCD_BL, 0); + lcd_enabled = 0; +} + +static struct panel_generic_dpi_data lcd43_panel = { + .name = "samsung_lte430wq_f0c", + .platform_enable = overo_panel_enable_lcd, + .platform_disable = overo_panel_disable_lcd, +}; + +static struct omap_dss_device overo_lcd43_device = { + .name = "lcd43", + .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &lcd43_panel, + .phy.dpi.data_lines = 24, +}; + +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) +static struct omap_dss_device overo_lcd35_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "lcd35", + .driver_name = "lgphilips_lb035q02_panel", + .phy.dpi.data_lines = 24, + .platform_enable = overo_panel_enable_lcd, + .platform_disable = overo_panel_disable_lcd, +}; +#endif + +static struct omap_dss_device *overo_dss_devices[] = { + &overo_dvi_device, + &overo_tv_device, +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) + &overo_lcd35_device, +#endif + &overo_lcd43_device, +}; + +static struct omap_dss_board_info overo_dss_data = { + .num_devices = ARRAY_SIZE(overo_dss_devices), + .devices = overo_dss_devices, + .default_device = &overo_dvi_device, +}; + +static struct regulator_consumer_supply overo_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); + +static struct regulator_consumer_supply overo_vdds_dsi_supply[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -323,6 +473,93 @@ static struct regulator_consumer_supply overo_vmmc1_supply = { .supply = "vmmc", }; +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +#include <linux/leds.h> + +static struct gpio_led gpio_leds[] = { + { + .name = "overo:red:gpio21", + .default_trigger = "heartbeat", + .gpio = 21, + .active_low = true, + }, + { + .name = "overo:blue:gpio22", + .default_trigger = "none", + .gpio = 22, + .active_low = true, + }, + { + .name = "overo:blue:COM", + .default_trigger = "mmc0", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_leds_pdata = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device gpio_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_leds_pdata, + }, +}; + +static void __init overo_init_led(void) +{ + platform_device_register(&gpio_leds_device); +} + +#else +static inline void __init overo_init_led(void) { return; } +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_0, + .gpio = 23, + .desc = "button0", + .wakeup = 1, + }, + { + .code = BTN_1, + .gpio = 14, + .desc = "button1", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_keys_pdata = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_keys_pdata, + }, +}; + +static void __init overo_init_keys(void) +{ + platform_device_register(&gpio_keys_device); +} + +#else +static inline void __init overo_init_keys(void) { return; } +#endif + static int overo_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -330,6 +567,11 @@ static int overo_twl_gpio_setup(struct device *dev, overo_vmmc1_supply.dev = mmc[0].dev; +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; +#endif + return 0; } @@ -337,6 +579,7 @@ static struct twl4030_gpio_platform_data overo_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, .setup = overo_twl_gpio_setup, }; @@ -358,6 +601,35 @@ static struct regulator_init_data overo_vmmc1 = { .consumer_supplies = &overo_vmmc1_supply, }; +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data overo_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &overo_vdda_dac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data overo_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply), + .consumer_supplies = overo_vdds_dsi_supply, +}; + static struct twl4030_codec_audio_data overo_audio_data; static struct twl4030_codec_data overo_codec_data = { @@ -365,8 +637,6 @@ static struct twl4030_codec_data overo_codec_data = { .audio = &overo_audio_data, }; -/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ - static struct twl4030_platform_data overo_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -374,6 +644,8 @@ static struct twl4030_platform_data overo_twldata = { .usb = &overo_usb_data, .codec = &overo_codec_data, .vmmc1 = &overo_vmmc1, + .vdac = &overo_vdac, + .vpll2 = &overo_vpll2, }; static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { @@ -394,18 +666,38 @@ static int __init overo_i2c_init(void) return 0; } -static struct platform_device overo_lcd_device = { - .name = "overo_lcd", - .id = -1, -}; - -static struct omap_lcd_config overo_lcd_config __initdata = { - .ctrl_name = "internal", +static struct spi_board_info overo_spi_board_info[] __initdata = { +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), + .platform_data = &ads7846_config, + }, +#endif +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) + { + .modalias = "lgphilips_lb035q02_panel-spi", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 500000, + .mode = SPI_MODE_3, + }, +#endif }; -static struct omap_board_config_kernel overo_config[] __initdata = { - { OMAP_TAG_LCD, &overo_lcd_config }, -}; +static int __init overo_spi_init(void) +{ + overo_ads7846_init(); + spi_register_board_info(overo_spi_board_info, + ARRAY_SIZE(overo_spi_board_info)); + return 0; +} static void __init overo_init_early(void) { @@ -414,15 +706,10 @@ static void __init overo_init_early(void) mt46h32m32lf6_sdrc_params); } -static struct platform_device *overo_devices[] __initdata = { - &overo_lcd_device, -}; - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, @@ -444,16 +731,18 @@ static struct omap_musb_board_data musb_board_data = { static void __init overo_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_board_config = overo_config; - omap_board_config_size = ARRAY_SIZE(overo_config); overo_i2c_init(); - platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); + omap_display_init(&overo_dss_data); omap_serial_init(); overo_flash_init(); usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); + overo_spi_init(); overo_ads7846_init(); overo_init_smsc911x(); + overo_display_init(); + overo_init_led(); + overo_init_keys(); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 5f1900c532e..bbcb6775a6a 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -372,7 +372,7 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = { }; static struct regulator_consumer_supply rx51_vdac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss"), + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), }; static struct regulator_init_data rx51_vaux1 = { diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index e964895b80e..f8ba20a14e6 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -141,14 +141,19 @@ static void __init rx51_init(void) static void __init rx51_map_io(void) { omap2_set_globals_3xxx(); - rx51_video_mem_init(); omap34xx_map_common_io(); } +static void __init rx51_reserve(void) +{ + rx51_video_mem_init(); + omap_reserve(); +} + MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ .boot_params = 0x80000100, - .reserve = omap_reserve, + .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, .init_irq = omap_init_irq, diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 448ab60195d..8dee7549fbd 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -226,11 +226,13 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply zoom_vpll2_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply zoom_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static struct regulator_consumer_supply zoom_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); static struct regulator_init_data zoom_vpll2 = { .constraints = { @@ -241,8 +243,8 @@ static struct regulator_init_data zoom_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vpll2_supplies), + .consumer_supplies = zoom_vpll2_supplies, }; static struct regulator_init_data zoom_vdac = { diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index b2b1e37bb6b..d6e34dd9e7e 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -115,6 +115,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, 0, 0, 0, 0); + clk->rate = rate; return 0; } diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index b6f65d4ac97..2926d028b6e 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1804,10 +1804,10 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_242X), CLK(NULL, "gfx_ick", &gfx_ick, CK_242X), /* DSS domain clocks */ - CLK("omapdss", "ick", &dss_ick, CK_242X), - CLK("omapdss", "dss1_fck", &dss1_fck, CK_242X), - CLK("omapdss", "dss2_fck", &dss2_fck, CK_242X), - CLK("omapdss", "tv_fck", &dss_54m_fck, CK_242X), + CLK("omapdss_dss", "ick", &dss_ick, CK_242X), + CLK("omapdss_dss", "fck", &dss1_fck, CK_242X), + CLK("omapdss_dss", "sys_clk", &dss2_fck, CK_242X), + CLK("omapdss_dss", "tv_clk", &dss_54m_fck, CK_242X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_242X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index bba018331a7..0c79d39e302 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1894,10 +1894,10 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ - CLK("omapdss", "ick", &dss_ick, CK_243X), - CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X), - CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X), - CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X), + CLK("omapdss_dss", "ick", &dss_ick, CK_243X), + CLK("omapdss_dss", "fck", &dss1_fck, CK_243X), + CLK("omapdss_dss", "sys_clk", &dss2_fck, CK_243X), + CLK("omapdss_dss", "tv_clk", &dss_54m_fck, CK_243X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index fcb321a64f1..75b119bd9cd 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3356,13 +3356,13 @@ static struct omap_clk omap3xxx_clks[] = { CLK("omap_rng", "ick", &rng_ick, CK_34XX | CK_36XX), CLK(NULL, "sha11_ick", &sha11_ick, CK_34XX | CK_36XX), CLK(NULL, "des1_ick", &des1_ick, CK_34XX | CK_36XX), - CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omapdss", "tv_fck", &dss_tv_fck, CK_3XXX), - CLK("omapdss", "video_fck", &dss_96m_fck, CK_3XXX), - CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_3XXX), - CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1), - CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("omapdss_dss", "fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapdss_dss", "fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("omapdss_dss", "tv_clk", &dss_tv_fck, CK_3XXX), + CLK("omapdss_dss", "video_clk", &dss_96m_fck, CK_3XXX), + CLK("omapdss_dss", "sys_clk", &dss2_alwon_fck, CK_3XXX), + CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX), CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index d32ed979a8d..8c965671b4d 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3114,11 +3114,11 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), CLK(NULL, "dmic_fck", &dmic_fck, CK_443X), CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), - CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X), - CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X), - CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X), - CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X), - CLK(NULL, "dss_fck", &dss_fck, CK_443X), + CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X), + CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X), + CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X), + CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X), + CLK("omapdss_dss", "ick", &dss_fck, CK_443X), CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), CLK(NULL, "emif2_fck", &emif2_fck, CK_443X), diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab878545bd9..6cb6c03293d 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -258,7 +258,7 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm, * clkdm_init - set up the clockdomain layer * @clkdms: optional pointer to an array of clockdomains to register * @init_autodeps: optional pointer to an array of autodeps to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Set up internal state. If a pointer to an array of clockdomains * @clkdms was supplied, loop through the list of clockdomains, diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 85b3dce6564..5823584d9cd 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -125,7 +125,7 @@ struct clockdomain { }; /** - * struct clkdm_ops - Arch specfic function implementations + * struct clkdm_ops - Arch specific function implementations * @clkdm_add_wkdep: Add a wakeup dependency between clk domains * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains * @clkdm_read_wkdep: Read wakeup dependency state between clk domains diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 9d0dec806e9..38830d8d478 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -247,6 +247,7 @@ struct omap3_cm_regs { u32 per_cm_clksel; u32 emu_cm_clksel; u32 emu_cm_clkstctrl; + u32 pll_cm_autoidle; u32 pll_cm_autoidle2; u32 pll_cm_clksel4; u32 pll_cm_clksel5; @@ -319,6 +320,15 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1); cm_context.emu_cm_clkstctrl = omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, even though this register has been saved in + * scratchpad contents, we need to restore AUTO_PERIPH_DPLL + * by ourselves. So, we need to save it anyway. + */ + cm_context.pll_cm_autoidle = + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); cm_context.pll_cm_autoidle2 = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2); cm_context.pll_cm_clksel4 = @@ -441,6 +451,13 @@ void omap3_cm_restore_context(void) CM_CLKSEL1); omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves. + */ + omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD, + CM_AUTOIDLE); omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD, CM_AUTOIDLE2); omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD, diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 69527941902..da53ba3917c 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void) omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); prcm_block_contents.cm_clken_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. + * Then, in anycase, clear these bits to avoid extra latencies. + */ prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & + ~OMAP3430_AUTO_PERIPH_DPLL_MASK; prcm_block_contents.cm_clksel1_pll = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); prcm_block_contents.cm_clksel2_pll = diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index a44c5230340..1c240eff391 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -297,8 +297,8 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); /** * omap3_cpuidle_update_states() - Update the cpuidle states - * @mpu_deepest_state: Enable states upto and including this for mpu domain - * @core_deepest_state: Enable states upto and including this for core domain + * @mpu_deepest_state: Enable states up to and including this for mpu domain + * @core_deepest_state: Enable states up to and including this for core domain * * This goes through the list of states available and enables and disables the * validity of C states based on deepest state that can be achieved for the diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 0d2d6a9c303..7b855856459 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -35,6 +35,7 @@ #include "mux.h" #include "control.h" +#include "devices.h" #define L3_MODULES_MAX_LEN 12 #define L3_MODULES 3 @@ -65,7 +66,7 @@ static int __init omap3_l3_init(void) WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name); - return PTR_ERR(od); + return IS_ERR(od) ? PTR_ERR(od) : 0; } postcore_initcall(omap3_l3_init); @@ -102,7 +103,7 @@ postcore_initcall(omap4_l3_init); #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) -static struct resource cam_resources[] = { +static struct resource omap2cam_resources[] = { { .start = OMAP24XX_CAMERA_BASE, .end = OMAP24XX_CAMERA_BASE + 0xfff, @@ -114,19 +115,13 @@ static struct resource cam_resources[] = { } }; -static struct platform_device omap_cam_device = { +static struct platform_device omap2cam_device = { .name = "omap24xxcam", .id = -1, - .num_resources = ARRAY_SIZE(cam_resources), - .resource = cam_resources, + .num_resources = ARRAY_SIZE(omap2cam_resources), + .resource = omap2cam_resources, }; - -static inline void omap_init_camera(void) -{ - platform_device_register(&omap_cam_device); -} - -#elif defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE) +#endif static struct resource omap3isp_resources[] = { { @@ -135,11 +130,6 @@ static struct resource omap3isp_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = OMAP3430_ISP_CBUFF_BASE, - .end = OMAP3430_ISP_CBUFF_END, - .flags = IORESOURCE_MEM, - }, - { .start = OMAP3430_ISP_CCP2_BASE, .end = OMAP3430_ISP_CCP2_END, .flags = IORESOURCE_MEM, @@ -175,13 +165,33 @@ static struct resource omap3isp_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = OMAP3430_ISP_CSI2A_BASE, - .end = OMAP3430_ISP_CSI2A_END, + .start = OMAP3430_ISP_CSI2A_REGS1_BASE, + .end = OMAP3430_ISP_CSI2A_REGS1_END, .flags = IORESOURCE_MEM, }, { - .start = OMAP3430_ISP_CSI2PHY_BASE, - .end = OMAP3430_ISP_CSI2PHY_END, + .start = OMAP3430_ISP_CSIPHY2_BASE, + .end = OMAP3430_ISP_CSIPHY2_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3630_ISP_CSI2A_REGS2_BASE, + .end = OMAP3630_ISP_CSI2A_REGS2_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3630_ISP_CSI2C_REGS1_BASE, + .end = OMAP3630_ISP_CSI2C_REGS1_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3630_ISP_CSIPHY1_BASE, + .end = OMAP3630_ISP_CSIPHY1_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3630_ISP_CSI2C_REGS2_BASE, + .end = OMAP3630_ISP_CSI2C_REGS2_END, .flags = IORESOURCE_MEM, }, { @@ -197,15 +207,19 @@ static struct platform_device omap3isp_device = { .resource = omap3isp_resources, }; -static inline void omap_init_camera(void) +int omap3_init_camera(struct isp_platform_data *pdata) { - platform_device_register(&omap3isp_device); + omap3isp_device.dev.platform_data = pdata; + return platform_device_register(&omap3isp_device); } -#else + static inline void omap_init_camera(void) { -} +#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) + if (cpu_is_omap24xx()) + platform_device_register(&omap2cam_device); #endif +} struct omap_device_pm_latency omap_keyboard_latency[] = { { @@ -239,7 +253,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data ARRAY_SIZE(omap_keyboard_latency), 0); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } @@ -359,7 +373,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) od = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata), omap_mcspi_latency, ARRAY_SIZE(omap_mcspi_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n", name, oh->name); kfree(pdata); return 0; @@ -711,7 +725,7 @@ static int __init omap_init_wdt(void) od = omap_device_build(dev_name, id, oh, NULL, 0, omap_wdt_latency, ARRAY_SIZE(omap_wdt_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n", dev_name, oh->name); return 0; } diff --git a/arch/arm/mach-omap2/devices.h b/arch/arm/mach-omap2/devices.h new file mode 100644 index 00000000000..f61eb6e5d13 --- /dev/null +++ b/arch/arm/mach-omap2/devices.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-omap2/devices.h + * + * OMAP2 platform device setup/initialization + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H +#define __ARCH_ARM_MACH_OMAP_DEVICES_H + +struct isp_platform_data; + +int omap3_init_camera(struct isp_platform_data *pdata); + +#endif diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index b18db84b034..256d23fb79a 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -23,6 +23,8 @@ #include <linux/err.h> #include <plat/display.h> +#include <plat/omap_hwmod.h> +#include <plat/omap_device.h> static struct platform_device omap_display_device = { .name = "omapdss", @@ -32,9 +34,87 @@ static struct platform_device omap_display_device = { }, }; +static struct omap_device_pm_latency omap_dss_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +/* oh_core is used for getting opt-clocks */ +static struct omap_hwmod *oh_core; + +static bool opt_clock_available(const char *clk_role) +{ + int i; + + for (i = 0; i < oh_core->opt_clks_cnt; i++) { + if (!strcmp(oh_core->opt_clks[i].role, clk_role)) + return true; + } + return false; +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; + struct omap_hwmod *oh; + struct omap_device *od; + int i; + struct omap_display_platform_data pdata; + + /* + * omap: valid DSS hwmod names + * omap2,3,4: dss_core, dss_dispc, dss_rfbi, dss_venc + * omap3,4: dss_dsi1 + * omap4: dss_dsi2, dss_hdmi + */ + char *oh_name[] = { "dss_core", "dss_dispc", "dss_rfbi", "dss_venc", + "dss_dsi1", "dss_dsi2", "dss_hdmi" }; + char *dev_name[] = { "omapdss_dss", "omapdss_dispc", "omapdss_rfbi", + "omapdss_venc", "omapdss_dsi1", "omapdss_dsi2", + "omapdss_hdmi" }; + int oh_count; + + memset(&pdata, 0, sizeof(pdata)); + + if (cpu_is_omap24xx()) + oh_count = ARRAY_SIZE(oh_name) - 3; + /* last 3 hwmod dev in oh_name are not available for omap2 */ + else if (cpu_is_omap44xx()) + oh_count = ARRAY_SIZE(oh_name); + else + oh_count = ARRAY_SIZE(oh_name) - 2; + /* last 2 hwmod dev in oh_name are not available for omap3 */ + + /* opt_clks are always associated with dss hwmod */ + oh_core = omap_hwmod_lookup("dss_core"); + if (!oh_core) { + pr_err("Could not look up dss_core.\n"); + return -ENODEV; + } + + pdata.board_data = board_data; + pdata.board_data->get_last_off_on_transaction_id = NULL; + pdata.opt_clock_available = opt_clock_available; + + for (i = 0; i < oh_count; i++) { + oh = omap_hwmod_lookup(oh_name[i]); + if (!oh) { + pr_err("Could not look up %s\n", oh_name[i]); + return -ENODEV; + } + + od = omap_device_build(dev_name[i], -1, oh, &pdata, + sizeof(struct omap_display_platform_data), + omap_dss_latency, + ARRAY_SIZE(omap_dss_latency), 0); + + if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n", + oh_name[i])) + return -ENODEV; + } omap_display_device.dev.platform_data = board_data; r = platform_device_register(&omap_display_device); diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 34922b2d2e3..c9ff0e79703 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -262,7 +262,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0); kfree(p); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 413de18c1d2..9529842ae05 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -82,7 +82,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) kfree(pdata); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 674174365f7..130034bf01d 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -693,6 +693,7 @@ static int __init gpmc_init(void) { u32 l, irq; int cs, ret = -EINVAL; + int gpmc_irq; char *ck = NULL; if (cpu_is_omap24xx()) { @@ -701,12 +702,15 @@ static int __init gpmc_init(void) l = OMAP2420_GPMC_BASE; else l = OMAP34XX_GPMC_BASE; + gpmc_irq = INT_34XX_GPMC_IRQ; } else if (cpu_is_omap34xx()) { ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; + gpmc_irq = INT_34XX_GPMC_IRQ; } else if (cpu_is_omap44xx()) { ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; + gpmc_irq = OMAP44XX_IRQ_GPMC; } if (WARN_ON(!ck)) @@ -739,16 +743,17 @@ static int __init gpmc_init(void) /* initalize the irq_chained */ irq = OMAP_GPMC_IRQ_BASE; for (cs = 0; cs < GPMC_CS_NUM; cs++) { - set_irq_handler(irq, handle_simple_irq); + irq_set_chip_and_handler(irq, &dummy_irq_chip, + handle_simple_irq); set_irq_flags(irq, IRQF_VALID); irq++; } - ret = request_irq(INT_34XX_GPMC_IRQ, + ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base); if (ret) pr_err("gpmc: irq-%d could not claim: err %d\n", - INT_34XX_GPMC_IRQ, ret); + gpmc_irq, ret); return ret; } postcore_initcall(gpmc_init); @@ -757,8 +762,6 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev) { u8 cs; - if (irq != INT_34XX_GPMC_IRQ) - return IRQ_HANDLED; /* check cs to invoke the irq */ cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7; if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 137e1a5f3d8..b2f30bed5a2 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -465,7 +465,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name); + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); kfree(mmc_data->slots[0].name); goto done; } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index bc524b94fd5..237e4530abf 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -223,8 +223,7 @@ void __init omap_init_irq(void) nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); for (i = 0; i < nr_of_irqs; i++) { - set_irq_chip(i, &omap_irq_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &omap_irq_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID); } } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 565b9064a32..4a6ef6ab845 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -149,7 +149,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) ARRAY_SIZE(omap2_mcbsp_latency), false); kfree(pdata); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index bb043cbb388..a4ab1e36431 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -518,7 +518,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) seq_printf(s, "/* %s */\n", m->muxnames[mode]); /* - * XXX: Might be revisited to support differences accross + * XXX: Might be revisited to support differences across * same OMAP generation. */ seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def); diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h index adbea0d03e0..9fd93149ebd 100644 --- a/arch/arm/mach-omap2/mux2430.h +++ b/arch/arm/mach-omap2/mux2430.h @@ -22,7 +22,7 @@ * absolute addresses. The name in the macro is the mode-0 name of * the pin. NOTE: These registers are 8-bits wide. * - * Note that these defines use SDMMC instead of MMC for compability + * Note that these defines use SDMMC instead of MMC for compatibility * with signal names used in 3630. */ #define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000 diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 62823467163..c4d0ae87d62 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1168,11 +1168,6 @@ static struct omap_hwmod_class omap2420_dss_hwmod_class = { .sysc = &omap2420_dss_sysc, }; -/* dss */ -static struct omap_hwmod_irq_info omap2420_dss_irqs[] = { - { .irq = 25 }, -}; - static struct omap_hwmod_dma_info omap2420_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, }; @@ -1221,8 +1216,6 @@ static struct omap_hwmod omap2420_dss_core_hwmod = { .name = "dss_core", .class = &omap2420_dss_hwmod_class, .main_clk = "dss1_fck", /* instead of dss_fck */ - .mpu_irqs = omap2420_dss_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dss_irqs), .sdma_reqs = omap2420_dss_sdma_chs, .sdma_reqs_cnt = ARRAY_SIZE(omap2420_dss_sdma_chs), .prcm = { @@ -1265,6 +1258,10 @@ static struct omap_hwmod_class omap2420_dispc_hwmod_class = { .sysc = &omap2420_dispc_sysc, }; +static struct omap_hwmod_irq_info omap2420_dispc_irqs[] = { + { .irq = 25 }, +}; + static struct omap_hwmod_addr_space omap2420_dss_dispc_addrs[] = { { .pa_start = 0x48050400, @@ -1297,6 +1294,8 @@ static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = { static struct omap_hwmod omap2420_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap2420_dispc_hwmod_class, + .mpu_irqs = omap2420_dispc_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dispc_irqs), .main_clk = "dss1_fck", .prcm = { .omap2 = { @@ -1640,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = { static struct omap_hwmod omap2420_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1670,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = { static struct omap_hwmod omap2420_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1700,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = { static struct omap_hwmod omap2420_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1730,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = { static struct omap_hwmod omap2420_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1783,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 0fdf2cabfb1..9682dd519f8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1268,10 +1268,6 @@ static struct omap_hwmod_class omap2430_dss_hwmod_class = { .sysc = &omap2430_dss_sysc, }; -/* dss */ -static struct omap_hwmod_irq_info omap2430_dss_irqs[] = { - { .irq = 25 }, -}; static struct omap_hwmod_dma_info omap2430_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, }; @@ -1314,8 +1310,6 @@ static struct omap_hwmod omap2430_dss_core_hwmod = { .name = "dss_core", .class = &omap2430_dss_hwmod_class, .main_clk = "dss1_fck", /* instead of dss_fck */ - .mpu_irqs = omap2430_dss_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_dss_irqs), .sdma_reqs = omap2430_dss_sdma_chs, .sdma_reqs_cnt = ARRAY_SIZE(omap2430_dss_sdma_chs), .prcm = { @@ -1358,6 +1352,10 @@ static struct omap_hwmod_class omap2430_dispc_hwmod_class = { .sysc = &omap2430_dispc_sysc, }; +static struct omap_hwmod_irq_info omap2430_dispc_irqs[] = { + { .irq = 25 }, +}; + static struct omap_hwmod_addr_space omap2430_dss_dispc_addrs[] = { { .pa_start = 0x48050400, @@ -1384,6 +1382,8 @@ static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = { static struct omap_hwmod omap2430_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap2430_dispc_hwmod_class, + .mpu_irqs = omap2430_dispc_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_dispc_irqs), .main_clk = "dss1_fck", .prcm = { .omap2 = { @@ -1559,7 +1559,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { * I2CHS IP's do not follow the usual pattern. * prcm_reg_id alone cannot be used to program * the iclk and fclk. Needs to be handled using - * additonal flags when clk handling is moved + * additional flags when clk handling is moved * to hwmod framework. */ .module_offs = CORE_MOD, @@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = { static struct omap_hwmod omap2430_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = { static struct omap_hwmod omap2430_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = { static struct omap_hwmod omap2430_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = { static struct omap_hwmod omap2430_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = { static struct omap_hwmod omap2430_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs), .main_clk = "gpio5_fck", @@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c819c306693..909a84de668 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1480,11 +1480,6 @@ static struct omap_hwmod_class omap3xxx_dss_hwmod_class = { .sysc = &omap3xxx_dss_sysc, }; -/* dss */ -static struct omap_hwmod_irq_info omap3xxx_dss_irqs[] = { - { .irq = 25 }, -}; - static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .name = "dsi1", .dma_req = 74 }, @@ -1548,7 +1543,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = { static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "tv_clk", .clk = "dss_tv_fck" }, - { .role = "dssclk", .clk = "dss_96m_fck" }, + { .role = "video_clk", .clk = "dss_96m_fck" }, { .role = "sys_clk", .clk = "dss2_alwon_fck" }, }; @@ -1556,8 +1551,6 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = { .name = "dss_core", .class = &omap3xxx_dss_hwmod_class, .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ - .mpu_irqs = omap3xxx_dss_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dss_irqs), .sdma_reqs = omap3xxx_dss_sdma_chs, .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_dss_sdma_chs), @@ -1584,8 +1577,6 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .name = "dss_core", .class = &omap3xxx_dss_hwmod_class, .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ - .mpu_irqs = omap3xxx_dss_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dss_irqs), .sdma_reqs = omap3xxx_dss_sdma_chs, .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_dss_sdma_chs), @@ -1631,6 +1622,10 @@ static struct omap_hwmod_class omap3xxx_dispc_hwmod_class = { .sysc = &omap3xxx_dispc_sysc, }; +static struct omap_hwmod_irq_info omap3xxx_dispc_irqs[] = { + { .irq = 25 }, +}; + static struct omap_hwmod_addr_space omap3xxx_dss_dispc_addrs[] = { { .pa_start = 0x48050400, @@ -1664,6 +1659,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap3xxx_dispc_hwmod_class, + .mpu_irqs = omap3xxx_dispc_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dispc_irqs), .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { @@ -1689,6 +1686,10 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { .name = "dsi", }; +static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { + { .irq = 25 }, +}; + /* dss_dsi1 */ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { { @@ -1722,6 +1723,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = { static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .name = "dss_dsi1", .class = &omap3xxx_dsi_hwmod_class, + .mpu_irqs = omap3xxx_dsi1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dsi1_irqs), .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { @@ -2138,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = { static struct omap_hwmod omap3xxx_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs), .main_clk = "gpio1_ick", @@ -2174,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = { static struct omap_hwmod omap3xxx_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs), .main_clk = "gpio2_ick", @@ -2210,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = { static struct omap_hwmod omap3xxx_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs), .main_clk = "gpio3_ick", @@ -2246,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = { static struct omap_hwmod omap3xxx_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs), .main_clk = "gpio4_ick", @@ -2282,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = { static struct omap_hwmod omap3xxx_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs), .main_clk = "gpio5_ick", @@ -2318,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = { static struct omap_hwmod omap3xxx_gpio6_hwmod = { .name = "gpio6", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio6_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs), .main_clk = "gpio6_ick", @@ -2383,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3e88dd3f8ef..abc548a0c98 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = { static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = { { .pa_start = 0x4a056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x4a056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 265bff3acb9..4321e793892 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) /* No timeout error for debug sources */ } - base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source))); - /* identify the error source */ for (err_source = 0; !(status & (1 << err_source)); err_source++) ; + + base = l3->rt + *(omap3_l3_bases[int_type] + err_source); error = omap3_l3_readll(base, L3_ERROR_LOG); if (error) { @@ -226,7 +226,6 @@ static int __init omap3_l3_probe(struct platform_device *pdev) struct omap3_l3 *l3; struct resource *res; int ret; - int irq; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) { @@ -249,18 +248,17 @@ static int __init omap3_l3_probe(struct platform_device *pdev) goto err2; } - irq = platform_get_irq(pdev, 0); - ret = request_irq(irq, omap3_l3_app_irq, + l3->debug_irq = platform_get_irq(pdev, 0); + ret = request_irq(l3->debug_irq, omap3_l3_app_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, "l3-debug-irq", l3); if (ret) { dev_err(&pdev->dev, "couldn't request debug irq\n"); goto err3; } - l3->debug_irq = irq; - irq = platform_get_irq(pdev, 1); - ret = request_irq(irq, omap3_l3_app_irq, + l3->app_irq = platform_get_irq(pdev, 1); + ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, "l3-app-irq", l3); @@ -269,7 +267,6 @@ static int __init omap3_l3_probe(struct platform_device *pdev) goto err4; } - l3->app_irq = irq; goto err0; err4: diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index e2e605fe913..05f6abc96b0 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -112,12 +112,12 @@ int omap4430_phy_power(struct device *dev, int ID, int on) else /* * Enable VBUS Valid, AValid and IDDIG - * high impedence + * high impedance */ __raw_writel(IDDIG | AVALID | VBUSVALID, ctrl_base + USBOTGHS_CONTROL); } else { - /* Enable session END and IDIG to high impedence. */ + /* Enable session END and IDIG to high impedance. */ __raw_writel(SESSEND | IDDIG, ctrl_base + USBOTGHS_CONTROL); } diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 0a8e74e3e81..07d6140baa9 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -308,7 +308,7 @@ int __init omap3_twl_init(void) * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages, * in those scenarios this bit is to be cleared (enable = false). * - * Returns 0 on sucess, error is returned if I2C read/write fails. + * Returns 0 on success, error is returned if I2C read/write fails. */ int __init omap3_twl_set_sr_bit(bool enable) { diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 30af3351c2d..49486f522dc 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void) if (cpu_is_omap44xx()) { _init_omap_device("l3_main_1", &l3_dev); _init_omap_device("dsp", &dsp_dev); + _init_omap_device("iva", &iva_dev); } else { _init_omap_device("l3_main", &l3_dev); } diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 49c6513e90d..9af08473bf1 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -196,7 +196,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer * @pwrdm_list: array of struct powerdomain pointers to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Loop through the array of powerdomains @pwrdm_list, registering all * that are available on the current CPU. If pwrdm_list is supplied diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 027f40bd235..d23d979b9c3 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -121,7 +121,7 @@ struct powerdomain { }; /** - * struct pwrdm_ops - Arch specfic function implementations + * struct pwrdm_ops - Arch specific function implementations * @pwrdm_set_next_pwrst: Set the target power state for a pd * @pwrdm_read_next_pwrst: Read the target power state set for a pd * @pwrdm_read_pwrst: Read the current power state of a pd diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 9c9c113788b..469a920a74d 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -72,7 +72,7 @@ static struct powerdomain mpu_3xxx_pwrdm = { /* * The USBTLL Save-and-Restore mechanism is broken on - * 3430s upto ES3.0 and 3630ES1.0. Hence this feature + * 3430s up to ES3.0 and 3630ES1.0. Hence this feature * needs to be disabled on these chips. * Refer: 3430 errata ID i459 and 3630 errata ID i579 * diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 8f674c9442b..13e24f913dd 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr) * driver register and sr device intializtion API's. Only one call * will ultimately succeed. * - * Currenly this function registers interrrupt handler for a particular SR + * Currently this function registers interrrupt handler for a particular SR * if smartreflex class driver is already registered and has * requested for interrupts and the SR interrupt line in present. */ diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c index 954682e6439..31c0ac4cd66 100644 --- a/arch/arm/mach-omap2/timer-mpu.c +++ b/arch/arm/mach-omap2/timer-mpu.c @@ -26,9 +26,14 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { + /* Local timers are not supprted on OMAP4430 ES1.0 */ + if (omap_rev() == OMAP4430_REV_ES1_0) + return -ENXIO; + evt->irq = OMAP44XX_IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index c6facf7becf..0c1552d9d99 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) sys_clk_speed /= 1000; /* Generic voltage parameters */ - vdd->curr_volt = 1200000; vdd->volt_scale = vp_forceupdate_scale_voltage; vdd->vp_enabled = false; @@ -851,7 +850,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm, * @voltdm: pointer to the VDD whose voltage is to be reset. * * This API finds out the correct voltage the voltage domain is supposed - * to be at and resets the voltage to that level. Should be used expecially + * to be at and resets the voltage to that level. Should be used especially * while disabling any voltage compensation modules. */ void omap_voltage_reset(struct voltagedomain *voltdm) @@ -912,7 +911,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, * This API searches only through the non-compensated voltages int the * voltage table. * Returns pointer to the voltage table entry corresponding to volt on - * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage + * success. Returns -ENODATA if no voltage table exisits for the passed voltage * domain or if there is no matching entry. */ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 1a5d6a0e260..5ceafdccc45 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -19,7 +19,7 @@ #include "common.h" /* - * The Orion has fully programable address map. There's a separate address + * The Orion has fully programmable address map. There's a separate address * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB, * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own * address decode windows that allow it to access any of the Orion resources. diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index c10a1171537..b7d4591214e 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void) pin = DB88F5281_PCI_SLOT0_IRQ_PIN; if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "db88f5281_pci_preinit faield to " "set_irq_type pin %d\n", pin); @@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void) pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN; if (gpio_request(pin, "PCI Int2") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "db88f5281_pci_preinit faield " "to set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index ed85891f869..43cf8bc9767 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -34,8 +34,8 @@ void __init orion5x_init_irq(void) * Initialize gpiolib for GPIOs 0-31. */ orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START); - set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler); + irq_set_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler); + irq_set_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler); + irq_set_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler); + irq_set_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler); } diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index 429ecafe9fd..a5930f83958 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -190,7 +190,7 @@ err_free_1: * The power front LEDs (blue and red) and SATA red LEDs are controlled via a * single GPIO line and are compatible with the leds-gpio driver. * - * The SATA blue LEDs have some hardware blink capabilities which are detailled + * The SATA blue LEDs have some hardware blink capabilities which are detailed * in the following array: * * SATAx blue LED | SATAx activity | LED state diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 67ec6959b26..4fc46772a08 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void) pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; if (gpio_request(pin, "PCI IntA") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit faield to " "set_irq_type pin %d\n", pin); @@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void) pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; if (gpio_request(pin, "PCI IntB") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit faield to " "set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 5653ee6c71d..61600414391 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -88,7 +88,7 @@ void __init tsp2_pci_preinit(void) pin = TSP2_PCI_SLOT0_IRQ_PIN; if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "tsp2_pci_preinit failed " "to set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 8bbd27ea673..e6d64494d3d 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -36,7 +36,7 @@ /**************************************************************************** * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * existing QNAP firmware. * * Layout as used by QNAP: @@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void) pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "qnap_ts209_pci_preinit failed to " "set_irq_type pin %d\n", pin); @@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void) pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; if (gpio_request(pin, "PCI Int2") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "qnap_ts209_pci_preinit failed " "to set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 92f393f08fa..9eac8192d92 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -56,7 +56,7 @@ /**************************************************************************** * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * existing QNAP firmware. * * Layout as used by QNAP: diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 8554707d20a..edb1dd2d161 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -402,7 +402,7 @@ static void ts78xx_fpga_supports(void) /* enable devices if magic matches */ switch ((ts78xx_fpga.id >> 8) & 0xffffff) { case TS7800_FPGA_MAGIC: - printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n", + pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n", ts78xx_fpga.id & 0xff); ts78xx_fpga.supports.ts_rtc.present = 1; ts78xx_fpga.supports.ts_nand.present = 1; @@ -423,7 +423,7 @@ static int ts78xx_fpga_load_devices(void) if (ts78xx_fpga.supports.ts_rtc.present == 1) { tmp = ts78xx_ts_rtc_load(); if (tmp) { - printk(KERN_INFO "TS-78xx: RTC not registered\n"); + pr_info("TS-78xx: RTC not registered\n"); ts78xx_fpga.supports.ts_rtc.present = 0; } ret |= tmp; @@ -431,7 +431,7 @@ static int ts78xx_fpga_load_devices(void) if (ts78xx_fpga.supports.ts_nand.present == 1) { tmp = ts78xx_ts_nand_load(); if (tmp) { - printk(KERN_INFO "TS-78xx: NAND not registered\n"); + pr_info("TS-78xx: NAND not registered\n"); ts78xx_fpga.supports.ts_nand.present = 0; } ret |= tmp; @@ -439,7 +439,7 @@ static int ts78xx_fpga_load_devices(void) if (ts78xx_fpga.supports.ts_rng.present == 1) { tmp = ts78xx_ts_rng_load(); if (tmp) { - printk(KERN_INFO "TS-78xx: RNG not registered\n"); + pr_info("TS-78xx: RNG not registered\n"); ts78xx_fpga.supports.ts_rng.present = 0; } ret |= tmp; @@ -466,7 +466,7 @@ static int ts78xx_fpga_load(void) { ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE); - printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n", + pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n", (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff); @@ -494,7 +494,7 @@ static int ts78xx_fpga_unload(void) * UrJTAG SVN since r1381 can be used to reprogram the FPGA */ if (ts78xx_fpga.id != fpga_id) { - printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n" + pr_err("TS-78xx FPGA: magic/rev mismatch\n" "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n", (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff, (fpga_id >> 8) & 0xffffff, fpga_id & 0xff); @@ -525,7 +525,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj, int value, ret; if (ts78xx_fpga.state < 0) { - printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n"); + pr_err("TS-78xx FPGA: borked, you must powercycle asap\n"); return -EBUSY; } @@ -534,7 +534,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj, else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) value = 0; else { - printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n"); + pr_err("ts78xx_fpga_store: Invalid value\n"); return -EINVAL; } @@ -616,7 +616,7 @@ static void __init ts78xx_init(void) ret = ts78xx_fpga_load(); ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr); if (ret) - printk(KERN_ERR "sysfs_create_file failed: %d\n", ret); + pr_err("sysfs_create_file failed: %d\n", ret); } MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c index c69c180aec7..7608c7a288c 100644 --- a/arch/arm/mach-pnx4008/irq.c +++ b/arch/arm/mach-pnx4008/irq.c @@ -58,22 +58,22 @@ static int pnx4008_set_irq_type(struct irq_data *d, unsigned int type) case IRQ_TYPE_EDGE_RISING: __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /*rising edge */ - set_irq_handler(d->irq, handle_edge_irq); + irq_set_handler(d->irq, handle_edge_irq); break; case IRQ_TYPE_EDGE_FALLING: __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*falling edge */ - set_irq_handler(d->irq, handle_edge_irq); + irq_set_handler(d->irq, handle_edge_irq); break; case IRQ_TYPE_LEVEL_LOW: __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*low level */ - set_irq_handler(d->irq, handle_level_irq); + irq_set_handler(d->irq, handle_level_irq); break; case IRQ_TYPE_LEVEL_HIGH: __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /* high level */ - set_irq_handler(d->irq, handle_level_irq); + irq_set_handler(d->irq, handle_level_irq); break; /* IRQ_TYPE_EDGE_BOTH is not supported */ @@ -98,7 +98,7 @@ void __init pnx4008_init_irq(void) /* configure IRQ's */ for (i = 0; i < NR_IRQS; i++) { set_irq_flags(i, IRQF_VALID); - set_irq_chip(i, &pnx4008_irq_chip); + irq_set_chip(i, &pnx4008_irq_chip); pnx4008_set_irq_type(irq_get_irq_data(i), pnx4008_irq_type[i]); } diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c index 3499fada73a..4cb069fd9af 100644 --- a/arch/arm/mach-pxa/am200epd.c +++ b/arch/arm/mach-pxa/am200epd.c @@ -128,8 +128,8 @@ static int am200_init_gpio_regs(struct metronomefb_par *par) return 0; err_req_gpio: - while (i > 0) - gpio_free(gpios[i--]); + while (--i >= 0) + gpio_free(gpios[i]); return err; } @@ -194,7 +194,7 @@ static struct notifier_block am200_fb_notif = { }; /* this gets called as part of our init. these steps must be done now so - * that we can use set_pxa_fb_info */ + * that we can use pxa_set_fb_info */ static void __init am200_presetup_fb(void) { int fw; @@ -249,7 +249,7 @@ static void __init am200_presetup_fb(void) /* we divide since we told the LCD controller we're 16bpp */ am200_fb_info.modes->xres /= 2; - set_pxa_fb_info(&am200_fb_info); + pxa_set_fb_info(NULL, &am200_fb_info); } diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index 993d75e6639..fa8bad235d9 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -125,10 +125,7 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par) if (err) { dev_err(&am300_device->dev, "failed requesting " "gpio %d, err=%d\n", i, err); - while (i >= DB0_GPIO_PIN) - gpio_free(i--); - i = ARRAY_SIZE(gpios) - 1; - goto err_req_gpio; + goto err_req_gpio2; } } @@ -159,9 +156,13 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par) return 0; +err_req_gpio2: + while (--i >= DB0_GPIO_PIN) + gpio_free(i); + i = ARRAY_SIZE(gpios); err_req_gpio: - while (i > 0) - gpio_free(gpios[i--]); + while (--i >= 0) + gpio_free(gpios[i]); return err; } diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index e194d928cda..bfbecec6d05 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -27,6 +27,7 @@ #include <linux/mtd/partitions.h> #include <linux/types.h> #include <linux/i2c/pcf857x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mtd/nand.h> #include <linux/mtd/physmap.h> #include <linux/regulator/max1586.h> @@ -51,8 +52,6 @@ #include <mach/irda.h> #include <mach/ohci.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" @@ -264,7 +263,7 @@ static void __init balloon3_lcd_init(void) } balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power; - set_pxa_fb_info(&balloon3_lcd_screen); + pxa_set_fb_info(NULL, &balloon3_lcd_screen); return; err2: @@ -528,13 +527,13 @@ static void __init balloon3_init_irq(void) pxa27x_init_irq(); /* setup extra Balloon3 irqs */ for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) { - set_irq_chip(irq, &balloon3_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &balloon3_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler); - set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler); + irq_set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING); pr_debug("%s: chained handler installed - irq %d automatically " "enabled\n", __func__, BALLOON3_AUX_NIRQ); diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index a2380cd76f8..8b1a30959fa 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -70,9 +70,10 @@ void __cmx2xx_pci_init_irq(int irq_gpio) cmx2xx_it8152_irq_gpio = irq_gpio; - set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); - set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx2xx_it8152_irq_demux); + irq_set_chained_handler(gpio_to_irq(irq_gpio), + cmx2xx_it8152_irq_demux); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index b734d846816..8225e2e58c6 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -379,7 +379,7 @@ __setup("monitor=", cmx2xx_set_display); static void __init cmx2xx_init_display(void) { - set_pxa_fb_info(cmx2xx_display); + pxa_set_fb_info(NULL, cmx2xx_display); } #else static inline void cmx2xx_init_display(void) {} diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 7984268508b..b2248e76ec8 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -29,6 +29,7 @@ #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mfd/da903x.h> #include <linux/regulator/machine.h> @@ -48,7 +49,6 @@ #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/ohci.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <mach/audio.h> #include <mach/pxa3xx-u2d.h> @@ -296,7 +296,7 @@ static struct pxafb_mach_info cm_x300_lcd = { static void __init cm_x300_init_lcd(void) { - set_pxa_fb_info(&cm_x300_lcd); + pxa_set_fb_info(NULL, &cm_x300_lcd); } #else static inline void cm_x300_init_lcd(void) {} @@ -765,7 +765,7 @@ static void __init cm_x300_init_da9030(void) { pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info); i2c_register_board_info(1, &cm_x300_pmic_info, 1); - set_irq_wake(IRQ_WAKEUP0, 1); + irq_set_irq_wake(IRQ_WAKEUP0, 1); } static void __init cm_x300_init_wi2wi(void) diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 28f667e52ef..81c3c433e2d 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -20,6 +20,7 @@ #include <mach/hardware.h> #include <asm/mach/arch.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/pxa27x.h> #include <mach/colibri.h> @@ -27,8 +28,6 @@ #include <mach/ohci.h> #include <mach/pxa27x-udc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 07b62a096f1..44c1b77ece6 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/pwm_backlight.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/sysdev.h> #include <asm/irq.h> @@ -33,8 +34,6 @@ #include <mach/pxa27x-udc.h> #include <mach/pxafb.h> -#include <plat/i2c.h> - #include "devices.h" #include "generic.h" @@ -176,7 +175,7 @@ static struct pxafb_mach_info income_lcd_screen = { static void __init income_lcd_init(void) { - set_pxa_fb_info(&income_lcd_screen); + pxa_set_fb_info(NULL, &income_lcd_screen); } #else static inline void income_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 96b2d9fbfef..3f9be419959 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -105,7 +105,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin) lcd_bl_pin = bl_pin; gpio_request(bl_pin, "lcd backlight"); gpio_direction_output(bl_pin, 0); - set_pxa_fb_info(&sharp_lq43_info); + pxa_set_fb_info(NULL, &sharp_lq43_info); } #endif diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index a5452a3a276..3a5507e3191 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/backlight.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/io.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -45,7 +46,6 @@ #include <asm/mach/irq.h> #include <mach/pxa25x.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> #include <mach/udc.h> @@ -462,7 +462,6 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = { * USB Device Controller */ static struct pxa2xx_udc_mach_info udc_info __initdata = { - .gpio_vbus = -1, /* no connect GPIO; corgi can't tell connection status */ .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index a305424a967..0481c29a70e 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -17,12 +17,12 @@ #include <linux/mtd/partitions.h> #include <linux/sm501.h> #include <linux/smsc911x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/csb726.h> #include <mach/mfp-pxa27x.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/ohci.h> #include <mach/pxa2xx-regs.h> diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 4c766e3b4af..2e0425404de 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,6 +4,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/spi/pxa2xx_spi.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/pmu.h> #include <mach/udc.h> @@ -16,7 +17,6 @@ #include <mach/camera.h> #include <mach/audio.h> #include <mach/hardware.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "devices.h" @@ -90,7 +90,6 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info) static struct pxa2xx_udc_mach_info pxa_udc_info = { .gpio_pullup = -1, - .gpio_vbus = -1, }; void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) @@ -188,16 +187,12 @@ struct platform_device pxa_device_fb = { .resource = pxafb_resources, }; -void __init set_pxa_fb_info(struct pxafb_mach_info *info) +void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info) { + pxa_device_fb.dev.parent = parent; pxa_register_device(&pxa_device_fb, info); } -void __init set_pxa_fb_parent(struct device *parent_dev) -{ - pxa_device_fb.dev.parent = parent_dev; -} - static struct resource pxa_resource_ffuart[] = { { .start = 0x40100000, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index a78bb309773..f8a6e9d79a3 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -31,6 +31,7 @@ #include <linux/apm-emulation.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/regulator/userspace-consumer.h> #include <media/soc_camera.h> @@ -45,7 +46,6 @@ #include <mach/ohci.h> #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> -#include <plat/i2c.h> #include <mach/camera.h> #include "generic.h" @@ -689,7 +689,7 @@ static struct pxafb_mach_info em_x270_lcd = { static void __init em_x270_init_lcd(void) { - set_pxa_fb_info(&em_x270_lcd); + pxa_set_fb_info(NULL, &em_x270_lcd); } #else static inline void em_x270_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index edca0a04329..2e3970fdde0 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -20,6 +20,7 @@ #include <linux/mfd/t7l66xb.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/usb/gpio_vbus.h> #include <video/w100fb.h> @@ -51,12 +52,20 @@ void __init eseries_fixup(struct machine_desc *desc, mi->bank[0].size = (64*1024*1024); } -struct pxa2xx_udc_mach_info e7xx_udc_mach_info = { +struct gpio_vbus_mach_info e7xx_udc_info = { .gpio_vbus = GPIO_E7XX_USB_DISC, .gpio_pullup = GPIO_E7XX_USB_PULLUP, .gpio_pullup_inverted = 1 }; +static struct platform_device e7xx_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &e7xx_udc_info, + }, +}; + struct pxaficp_platform_data e7xx_ficp_platform_data = { .gpio_pwdown = GPIO_E7XX_IR_OFF, .transceiver_cap = IR_SIRMODE | IR_OFF, @@ -165,6 +174,7 @@ static struct platform_device e330_tc6387xb_device = { static struct platform_device *e330_devices[] __initdata = { &e330_tc6387xb_device, + &e7xx_gpio_vbus, }; static void __init e330_init(void) @@ -175,7 +185,6 @@ static void __init e330_init(void) eseries_register_clks(); eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e330_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); } MACHINE_START(E330, "Toshiba e330") @@ -214,6 +223,7 @@ static struct platform_device e350_t7l66xb_device = { static struct platform_device *e350_devices[] __initdata = { &e350_t7l66xb_device, + &e7xx_gpio_vbus, }; static void __init e350_init(void) @@ -224,7 +234,6 @@ static void __init e350_init(void) eseries_register_clks(); eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e350_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); } MACHINE_START(E350, "Toshiba e350") @@ -333,6 +342,7 @@ static struct platform_device e400_t7l66xb_device = { static struct platform_device *e400_devices[] __initdata = { &e400_t7l66xb_device, + &e7xx_gpio_vbus, }; static void __init e400_init(void) @@ -344,9 +354,8 @@ static void __init e400_init(void) /* Fixme - e400 may have a switched clock */ eseries_register_clks(); eseries_get_tmio_gpios(); - set_pxa_fb_info(&e400_pxafb_mach_info); + pxa_set_fb_info(NULL, &e400_pxafb_mach_info); platform_add_devices(ARRAY_AND_SIZE(e400_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); } MACHINE_START(E400, "Toshiba e400") @@ -519,6 +528,7 @@ static struct platform_device e740_t7l66xb_device = { static struct platform_device *e740_devices[] __initdata = { &e740_fb_device, &e740_t7l66xb_device, + &e7xx_gpio_vbus, }; static void __init e740_init(void) @@ -532,7 +542,6 @@ static void __init e740_init(void) "UDCCLK", &pxa25x_device_udc.dev), eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e740_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); } @@ -711,6 +720,7 @@ static struct platform_device e750_tc6393xb_device = { static struct platform_device *e750_devices[] __initdata = { &e750_fb_device, &e750_tc6393xb_device, + &e7xx_gpio_vbus, }; static void __init e750_init(void) @@ -723,7 +733,6 @@ static void __init e750_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e750_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); } @@ -873,12 +882,21 @@ static struct platform_device e800_fb_device = { /* --------------------------- UDC definitions --------------------------- */ -static struct pxa2xx_udc_mach_info e800_udc_mach_info = { +static struct gpio_vbus_mach_info e800_udc_info = { .gpio_vbus = GPIO_E800_USB_DISC, .gpio_pullup = GPIO_E800_USB_PULLUP, .gpio_pullup_inverted = 1 }; +static struct platform_device e800_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &e800_udc_info, + }, +}; + + /* ----------------- e800 tc6393xb parameters ------------------ */ static struct tc6393xb_platform_data e800_tc6393xb_info = { @@ -907,6 +925,7 @@ static struct platform_device e800_tc6393xb_device = { static struct platform_device *e800_devices[] __initdata = { &e800_fb_device, &e800_tc6393xb_device, + &e800_gpio_vbus, }; static void __init e800_init(void) @@ -919,7 +938,6 @@ static void __init e800_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e800_devices)); - pxa_set_udc_info(&e800_udc_mach_info); pxa_set_ac97_info(NULL); } diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 87cec0abe5b..d88aed8fbe1 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -20,6 +20,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/leds-lp3944.h> +#include <linux/i2c/pxa-i2c.h> #include <media/soc_camera.h> @@ -30,7 +31,6 @@ #include <mach/pxa27x.h> #include <mach/pxafb.h> #include <mach/ohci.h> -#include <plat/i2c.h> #include <mach/hardware.h> #include <plat/pxa27x_keypad.h> #include <mach/camera.h> @@ -783,7 +783,7 @@ static void __init a780_init(void) pxa_set_i2c_info(NULL); - set_pxa_fb_info(&ezx_fb_info_1); + pxa_set_fb_info(NULL, &ezx_fb_info_1); pxa_set_keypad_info(&a780_keypad_platform_data); @@ -853,7 +853,7 @@ static void __init e680_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_1); + pxa_set_fb_info(NULL, &ezx_fb_info_1); pxa_set_keypad_info(&e680_keypad_platform_data); @@ -918,7 +918,7 @@ static void __init a1200_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&a1200_keypad_platform_data); @@ -1103,7 +1103,7 @@ static void __init a910_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&a910_keypad_platform_data); @@ -1173,7 +1173,7 @@ static void __init e6_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&e6_keypad_platform_data); @@ -1212,7 +1212,7 @@ static void __init e2_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&e2_keypad_platform_data); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 6fd319ea528..d65e4bde9b9 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -26,6 +26,7 @@ #include <linux/gpio.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/usb/gpio_vbus.h> #include <asm/setup.h> #include <asm/memory.h> @@ -106,14 +107,22 @@ static void __init gumstix_mmc_init(void) #endif #ifdef CONFIG_USB_GADGET_PXA25X -static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = { +static struct gpio_vbus_mach_info gumstix_udc_info = { .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, }; +static struct platform_device gumstix_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &gumstix_udc_info, + }, +}; + static void __init gumstix_udc_init(void) { - pxa_set_udc_info(&gumstix_udc_info); + platform_device_register(&gumstix_gpio_vbus); } #else static void gumstix_udc_init(void) diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index a908e0a5f39..9cdcca59792 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -35,6 +35,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -42,7 +43,6 @@ #include <mach/pxa27x.h> #include <mach/hx4700.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <video/platform_lcd.h> @@ -711,7 +711,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), .consumer_supplies = bq24022_consumers, diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index dd40e4a9291..f7fb64f11a7 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -167,7 +167,7 @@ static void __init idp_init(void) platform_device_register(&smc91x_device); //platform_device_register(&mst_audio_device); - set_pxa_fb_info(&sharp_lm8v31); + pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&idp_mci_platform_data); } diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index b024a8b3743..c4639502efc 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -99,11 +99,24 @@ #define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) -#define NR_BUILTIN_GPIO 128 +#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) + +static inline int irq_to_gpio(unsigned int irq) +{ + int gpio; + + if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1) + return irq - IRQ_GPIO0; + + gpio = irq - PXA_GPIO_IRQ_BASE; + if (gpio >= 2 && gpio < NR_BUILTIN_GPIO) + return gpio; + + return -1; +} #ifdef CONFIG_CPU_PXA26x /* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index a4285fc0087..038402404e3 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -93,9 +93,6 @@ #define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) #define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) -#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) -#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) - /* * The following interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h index 2bbcf70dd93..0d4700a7961 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -44,6 +44,11 @@ #define GPIO_NR_PALMZ72_BT_POWER 17 #define GPIO_NR_PALMZ72_BT_RESET 83 +/* Camera */ +#define GPIO_NR_PALMZ72_CAM_PWDN 56 +#define GPIO_NR_PALMZ72_CAM_RESET 57 +#define GPIO_NR_PALMZ72_CAM_POWER 91 + /** Initial values **/ /* Battery */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index e4fb4668c26..207ecb49a61 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -38,7 +38,7 @@ #define PCMD(x) __REG(0x40F50110 + ((x) << 2)) /* - * Slave Power Managment Unit + * Slave Power Management Unit */ #define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ #define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 160ec83f51a..01a45ac4811 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -154,8 +154,8 @@ struct pxafb_mach_info { void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); void (*smart_update)(struct fb_info *); }; -void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info); -void set_pxa_fb_parent(struct device *parent_dev); + +void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); unsigned long pxafb_get_hsync_time(struct device *dev); extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h index 8835c16bc82..7b0f71ef316 100644 --- a/arch/arm/mach-pxa/include/mach/z2.h +++ b/arch/arm/mach-pxa/include/mach/z2.h @@ -25,8 +25,7 @@ #define GPIO98_ZIPITZ2_LID_BUTTON 98 /* Libertas GSPI8686 WiFi */ -#define GPIO14_ZIPITZ2_WIFI_RESET 14 -#define GPIO15_ZIPITZ2_WIFI_POWER 15 +#define GPIO14_ZIPITZ2_WIFI_POWER 14 #define GPIO24_ZIPITZ2_WIFI_CS 24 #define GPIO36_ZIPITZ2_WIFI_IRQ 36 diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index faa408ab7ad..0641f31a56b 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -64,7 +64,7 @@ /* * CPLD registers: - * Only 4 registers, but spreaded over a 32MB address space. + * Only 4 registers, but spread over a 32MB address space. * Be gentle, and remap that over 32kB... */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 2693e3c3776..6251e3f5c62 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -137,9 +137,9 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn) GEDR0 = 0x3; for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { - set_irq_chip(irq, &pxa_low_gpio_chip); - set_irq_chip_data(irq, irq_base(0)); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &pxa_low_gpio_chip, + handle_edge_irq); + irq_set_chip_data(irq, irq_base(0)); set_irq_flags(irq, IRQF_VALID); } @@ -165,9 +165,9 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) __raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i)); irq = PXA_IRQ(i); - set_irq_chip(irq, &pxa_internal_irq_chip); - set_irq_chip_data(irq, base); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &pxa_internal_irq_chip, + handle_level_irq); + irq_set_chip_data(irq, base); set_irq_flags(irq, IRQF_VALID); } } diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index ccb7bfad17c..e5e326d2cdc 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -28,6 +28,7 @@ #include <linux/leds.h> #include <linux/mfd/da903x.h> #include <linux/i2c/max732x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -45,7 +46,6 @@ #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> #include <mach/littleton.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "generic.h" @@ -185,7 +185,7 @@ static struct pxafb_mach_info littleton_lcd_info = { static void littleton_init_lcd(void) { - set_pxa_fb_info(&littleton_lcd_info); + pxa_set_fb_info(NULL, &littleton_lcd_info); } #else static inline void littleton_init_lcd(void) {}; diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index c9a3e775c2d..f5de541725b 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -149,12 +149,12 @@ static void __init lpd270_init_irq(void) /* setup extra LogicPD PXA270 irqs */ for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) { - set_irq_chip(irq, &lpd270_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &lpd270_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); + irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } @@ -480,7 +480,7 @@ static void __init lpd270_init(void) pxa_set_ac97_info(NULL); if (lpd270_lcd_to_use != NULL) - set_pxa_fb_info(lpd270_lcd_to_use); + pxa_set_fb_info(NULL, lpd270_lcd_to_use); pxa_set_ohci_info(&lpd270_ohci_platform_data); } diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index dca20de306b..3ede978c83d 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -165,13 +165,13 @@ static void __init lubbock_init_irq(void) /* setup extra lubbock irqs */ for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) { - set_irq_chip(irq, &lubbock_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &lubbock_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); + irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM @@ -521,7 +521,7 @@ static void __init lubbock_init(void) clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); pxa_set_udc_info(&udc_info); - set_pxa_fb_info(&sharp_lm8v31); + pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); pxa_set_ficp_info(&lubbock_ficp_platform_data); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 41198f0dc3a..9984ef70bd7 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -28,6 +28,7 @@ #include <linux/regulator/bq24022.h> #include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -36,7 +37,6 @@ #include <mach/pxa27x.h> #include <mach/magician.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> @@ -599,7 +599,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), .consumer_supplies = bq24022_consumers, @@ -757,7 +757,7 @@ static void __init magician_init(void) gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0); gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0); gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0); - set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info); + pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d4b6f2375f2..95163baca29 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -27,6 +27,7 @@ #include <linux/gpio_keys.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -46,7 +47,6 @@ #include <mach/mainstone.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> @@ -166,8 +166,8 @@ static void __init mainstone_init_irq(void) /* setup extra Mainstone irqs */ for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) { - set_irq_chip(irq, &mainstone_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &mainstone_irq_chip, + handle_level_irq); if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14)) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); else @@ -179,8 +179,8 @@ static void __init mainstone_init_irq(void) MST_INTMSKENA = 0; MST_INTSETCLR = 0; - set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); + irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM @@ -592,7 +592,7 @@ static void __init mainstone_init(void) else mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode; - set_pxa_fb_info(&mainstone_pxafb_info); + pxa_set_fb_info(NULL, &mainstone_pxafb_info); mainstone_backlight_register(); pxa_set_mci_info(&mainstone_mci_platform_data); diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index faafea3542f..23925db8ff7 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -39,6 +39,7 @@ #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> #include <linux/slab.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -50,7 +51,6 @@ #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> -#include <plat/i2c.h> #include <mach/camera.h> #include <mach/audio.h> #include <media/soc_camera.h> @@ -458,7 +458,7 @@ static struct platform_device strataflash = { /* * Suspend/Resume bootstrap management * - * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled, + * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled, * this sequence is as follows : * - disables interrupts * - initialize SDRAM (self refresh RAM into active RAM) @@ -795,7 +795,7 @@ static void __init mioa701_machine_init(void) pxa_set_stuart_info(NULL); mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); bootstrap_init(); - set_pxa_fb_info(&mioa701_pxafb_info); + pxa_set_fb_info(NULL, &mioa701_pxafb_info); pxa_set_mci_info(&mioa701_mci_info); pxa_set_keypad_info(&mioa701_keypad_info); pxa_set_udc_info(&mioa701_udc_info); diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index cdf7f41e2bb..b5a8fd3fce0 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -22,8 +22,8 @@ #include <linux/serial_8250.h> #include <linux/dm9000.h> #include <linux/gpio.h> +#include <linux/i2c/pxa-i2c.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 35572c427fa..325c245c0a0 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -1,8 +1,7 @@ /* * Common code for Palm LD, T5, TX, Z72 * - * Copyright (C) 2010 - * Marek Vasut <marek.vasut@gmail.com> + * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,6 +21,7 @@ #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -36,8 +36,6 @@ #include <mach/palmasoc.h> #include <mach/palm27x.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" @@ -159,7 +157,7 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl; } - set_pxa_fb_info(&palm27x_lcd_screen); + pxa_set_fb_info(NULL, &palm27x_lcd_screen); } #endif diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index a09a2374697..fb06bd04727 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -507,7 +507,7 @@ static struct pxafb_mach_info palmtc_lcd_screen = { static void __init palmtc_lcd_init(void) { - set_pxa_fb_info(&palmtc_lcd_screen); + pxa_set_fb_info(NULL, &palmtc_lcd_screen); } #else static inline void palmtc_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 3f25014a136..726f5b98dcd 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -136,30 +136,14 @@ static struct platform_device palmte2_pxa_keys = { /****************************************************************************** * Backlight ******************************************************************************/ +static struct gpio palmte_bl_gpios[] = { + { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" }, + { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" }, +}; + static int palmte2_backlight_init(struct device *dev) { - int ret; - - ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER"); - if (ret) - goto err; - ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0); - if (ret) - goto err2; - ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0); - if (ret) - goto err3; - - return 0; -err3: - gpio_free(GPIO_NR_PALMTE2_LCD_POWER); -err2: - gpio_free(GPIO_NR_PALMTE2_BL_POWER); -err: - return ret; + return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios)); } static int palmte2_backlight_notify(struct device *dev, int brightness) @@ -171,8 +155,7 @@ static int palmte2_backlight_notify(struct device *dev, int brightness) static void palmte2_backlight_exit(struct device *dev) { - gpio_free(GPIO_NR_PALMTE2_BL_POWER); - gpio_free(GPIO_NR_PALMTE2_LCD_POWER); + gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios)); } static struct platform_pwm_backlight_data palmte2_backlight_data = { @@ -363,7 +346,7 @@ static void __init palmte2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - set_pxa_fb_info(&palmte2_lcd_screen); + pxa_set_fb_info(NULL, &palmte2_lcd_screen); pxa_set_mci_info(&palmte2_mci_platform_data); palmte2_udc_init(); pxa_set_ac97_info(&palmte2_ac97_pdata); diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 3010193b081..3b8a4f37dbb 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -30,6 +30,7 @@ #include <linux/wm97xx.h> #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -47,6 +48,9 @@ #include <mach/palm27x.h> #include <mach/pm.h> +#include <mach/camera.h> + +#include <media/soc_camera.h> #include "generic.h" #include "devices.h" @@ -103,6 +107,28 @@ static unsigned long palmz72_pin_config[] __initdata = { GPIO22_GPIO, /* LCD border color */ GPIO96_GPIO, /* lcd power */ + /* PXA Camera */ + GPIO81_CIF_DD_0, + GPIO48_CIF_DD_5, + GPIO50_CIF_DD_3, + GPIO51_CIF_DD_2, + GPIO52_CIF_DD_4, + GPIO53_CIF_MCLK, + GPIO54_CIF_PCLK, + GPIO55_CIF_DD_1, + GPIO84_CIF_FV, + GPIO85_CIF_LV, + GPIO93_CIF_DD_6, + GPIO108_CIF_DD_7, + + GPIO56_GPIO, /* OV9640 Powerdown */ + GPIO57_GPIO, /* OV9640 Reset */ + GPIO91_GPIO, /* OV9640 Power */ + + /* I2C */ + GPIO117_GPIO, /* I2C_SCL */ + GPIO118_GPIO, /* I2C_SDA */ + /* Misc. */ GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */ GPIO88_GPIO, /* green led */ @@ -254,6 +280,106 @@ device_initcall(palmz72_pm_init); #endif /****************************************************************************** + * SoC Camera + ******************************************************************************/ +#if defined(CONFIG_SOC_CAMERA_OV9640) || \ + defined(CONFIG_SOC_CAMERA_OV9640_MODULE) +static struct pxacamera_platform_data palmz72_pxacamera_platform_data = { + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 2600, +}; + +/* Board I2C devices. */ +static struct i2c_board_info palmz72_i2c_device[] = { + { + I2C_BOARD_INFO("ov9640", 0x30), + } +}; + +static int palmz72_camera_power(struct device *dev, int power) +{ + gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power); + mdelay(50); + return 0; +} + +static int palmz72_camera_reset(struct device *dev) +{ + gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1); + mdelay(50); + gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0); + mdelay(50); + return 0; +} + +static struct soc_camera_link palmz72_iclink = { + .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */ + .board_info = &palmz72_i2c_device[0], + .i2c_adapter_id = 0, + .module_name = "ov96xx", + .power = &palmz72_camera_power, + .reset = &palmz72_camera_reset, + .flags = SOCAM_DATAWIDTH_8, +}; + +static struct i2c_gpio_platform_data palmz72_i2c_bus_data = { + .sda_pin = 118, + .scl_pin = 117, + .udelay = 10, + .timeout = 100, +}; + +static struct platform_device palmz72_i2c_bus_device = { + .name = "i2c-gpio", + .id = 0, /* we use this as a replacement for i2c-pxa */ + .dev = { + .platform_data = &palmz72_i2c_bus_data, + } +}; + +static struct platform_device palmz72_camera = { + .name = "soc-camera-pdrv", + .id = -1, + .dev = { + .platform_data = &palmz72_iclink, + }, +}; + +/* Here we request the camera GPIOs and configure them. We power up the camera + * module, deassert the reset pin, but put it into powerdown (low to no power + * consumption) mode. This allows us to later bring the module up fast. */ +static struct gpio palmz72_camera_gpios[] = { + { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" }, + { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" }, + { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" }, +}; + +static inline void __init palmz72_cam_gpio_init(void) +{ + int ret; + + ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); + if (!ret) + gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); + else + printk(KERN_ERR "Camera GPIO init failed!\n"); + + return; +} + +static void __init palmz72_camera_init(void) +{ + palmz72_cam_gpio_init(); + pxa_set_camera_info(&palmz72_pxacamera_platform_data); + platform_device_register(&palmz72_i2c_bus_device); + platform_device_register(&palmz72_camera); +} +#else +static inline void palmz72_camera_init(void) {} +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static void __init palmz72_init(void) @@ -276,6 +402,7 @@ static void __init palmz72_init(void) palm27x_pmic_init(); palmz72_kpc_init(); palmz72_leds_init(); + palmz72_camera_init(); } MACHINE_START(PALMZ72, "Palm Zire72") diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 90820faa711..6d5b7e06212 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -23,12 +23,12 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/pwm_backlight.h> #include <media/soc_camera.h> #include <asm/gpio.h> -#include <plat/i2c.h> #include <mach/camera.h> #include <asm/mach/map.h> #include <mach/pxa27x.h> @@ -281,16 +281,16 @@ static void __init pcm990_init_irq(void) /* setup extra PCM990 irqs */ for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) { - set_irq_chip(irq, &pcm990_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &pcm990_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } PCM990_INTMSKENA = 0x00; /* disable all Interrupts */ PCM990_INTSETCLR = 0xFF; - set_irq_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler); - set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE); + irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler); + irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE); } static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int, @@ -515,7 +515,7 @@ void __init pcm990_baseboard_init(void) pcm990_init_irq(); #ifndef CONFIG_PCM990_DISPLAY_NONE - set_pxa_fb_info(&pcm990_fbinfo); + pxa_set_fb_info(NULL, &pcm990_fbinfo); #endif platform_device_register(&pcm990_backlight_device); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 4f0ff1ab623..16d14fd79b4 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -23,6 +23,7 @@ #include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/pxa2xx_spi.h> @@ -44,7 +45,6 @@ #include <mach/irda.h> #include <mach/poodle.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <asm/hardware/scoop.h> #include <asm/hardware/locomo.h> @@ -445,8 +445,7 @@ static void __init poodle_init(void) if (ret) pr_warning("poodle: Unable to register LoCoMo device\n"); - set_pxa_fb_parent(&poodle_locomo_device.dev); - set_pxa_fb_info(&poodle_fb_info); + pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 6bde5956358..a4af8c52d7e 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -285,7 +285,7 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = IRQ_TO_GPIO(d->irq); + int gpio = irq_to_gpio(d->irq); uint32_t mask = 0; if (gpio >= 0 && gpio < 85) diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 28b11be00b3..909756eaf4b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -19,6 +19,7 @@ #include <linux/sysdev.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -32,8 +33,6 @@ #include <mach/dma.h> #include <mach/smemc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" #include "clock.h" @@ -346,7 +345,7 @@ static inline void pxa27x_init_pm(void) {} */ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = IRQ_TO_GPIO(d->irq); + int gpio = irq_to_gpio(d->irq); uint32_t mask; if (gpio >= 0 && gpio < 128) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 1230343d9c7..8dd10739115 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -21,6 +21,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/sysdev.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -32,7 +33,6 @@ #include <mach/dma.h> #include <mach/regs-intc.h> #include <mach/smemc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" @@ -362,8 +362,8 @@ static void __init pxa_init_ext_wakeup_irq(set_wake_t fn) int irq; for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) { - set_irq_chip(irq, &pxa_ext_wakeup_chip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip, + handle_edge_irq); set_irq_flags(irq, IRQF_VALID); } diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 437980f7271..23b229bd06e 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/sysdev.h> @@ -27,7 +28,6 @@ #include <mach/pm.h> #include <mach/dma.h> #include <mach/regs-intc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 8361151be05..cd1861351f7 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -32,6 +32,7 @@ #include <linux/sched.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/lis3lv02d.h> @@ -53,7 +54,6 @@ #include <mach/ohci.h> #include <mach/pxafb.h> #include <mach/mmc.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "generic.h" @@ -597,7 +597,7 @@ static void __init raumfeld_lcd_init(void) { int ret; - set_pxa_fb_info(&raumfeld_sharp_lcd_info); + pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); /* Earlier devices had the backlight regulator controlled * via PWM, later versions use another controller for that */ diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index c1ca8cb467f..fee97a93512 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/fb.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/smc91x.h> #include <linux/mfd/da903x.h> #include <linux/mtd/mtd.h> @@ -31,7 +32,6 @@ #include <asm/mach/flash.h> #include <mach/pxa930.h> -#include <plat/i2c.h> #include <mach/pxafb.h> #include "devices.h" @@ -473,7 +473,7 @@ static struct pxafb_mach_info saar_lcd_info = { static void __init saar_init_lcd(void) { - set_pxa_fb_info(&saar_lcd_info); + pxa_set_fb_info(NULL, &saar_lcd_info); } #else static inline void saar_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index e497922f761..9322fe527c7 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> #include <asm/mach-types.h> @@ -24,8 +25,6 @@ #include <mach/mfp-pxa930.h> #include <mach/gpio.h> -#include <plat/i2c.h> - #include "generic.h" #define SAARB_NR_IRQS (IRQ_BOARD_START + 40) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index b49a2c21124..01c576963e9 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/leds.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -47,8 +48,6 @@ #include <mach/sharpsl_pm.h> #include <mach/smemc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" @@ -725,7 +724,7 @@ static struct pxafb_mach_info spitz_pxafb_info = { static void __init spitz_lcd_init(void) { - set_pxa_fb_info(&spitz_pxafb_info); + pxa_set_fb_info(NULL, &spitz_pxafb_info); } #else static inline void spitz_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 9a14fdb83c8..cb5611daf5f 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -25,6 +25,7 @@ #include <linux/mtd/plat-ram.h> #include <linux/mtd/partitions.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> #include <linux/smc91x.h> @@ -43,7 +44,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 9cecf8366db..53d4a472b69 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -466,7 +466,7 @@ static void __init tavorevb_init_lcd(void) { platform_device_register(&tavorevb_backlight_devices[0]); platform_device_register(&tavorevb_backlight_devices[1]); - set_pxa_fb_info(&tavorevb_lcd_info); + pxa_set_fb_info(NULL, &tavorevb_lcd_info); } #else static inline void tavorevb_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index 70191a9450e..79f4422f12f 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/gpio.h> #include <linux/mfd/88pm860x.h> @@ -23,8 +24,6 @@ #include <mach/pxa930.h> -#include <plat/i2c.h> - #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index e7f64d9b4f2..428da3ff33a 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -100,7 +100,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) static struct clock_event_device ckevt_pxa_osmr0 = { .name = "osmr0", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 200, .set_next_event = pxa_osmr0_set_next_event, .set_mode = pxa_osmr0_set_mode, @@ -135,8 +134,8 @@ static void __init pxa_timer_init(void) init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate); - ckevt_pxa_osmr0.mult = - div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); + clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4); + clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4); ckevt_pxa_osmr0.max_delta_ns = clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); ckevt_pxa_osmr0.min_delta_ns = diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index f2582ec300d..5fa145778e7 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -34,6 +34,8 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/input/matrix_keypad.h> +#include <linux/i2c/pxa-i2c.h> +#include <linux/usb/gpio_vbus.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -41,7 +43,6 @@ #include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/irda.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/tosa_bt.h> @@ -240,12 +241,20 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = { /* * USB Device Controller */ -static struct pxa2xx_udc_mach_info udc_info __initdata = { +static struct gpio_vbus_mach_info tosa_udc_info = { .gpio_pullup = TOSA_GPIO_USB_PULLUP, .gpio_vbus = TOSA_GPIO_USB_IN, .gpio_vbus_inverted = 1, }; +static struct platform_device tosa_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &tosa_udc_info, + }, +}; + /* * MMC/SD Device */ @@ -891,6 +900,7 @@ static struct platform_device *devices[] __initdata = { &tosa_bt_device, &sharpsl_rom_device, &wm9712_device, + &tosa_gpio_vbus, }; static void tosa_poweroff(void) @@ -937,7 +947,6 @@ static void __init tosa_init(void) dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); pxa_set_mci_info(&tosa_mci_platform_data); - pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); pxa_set_i2c_info(NULL); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 423261d63d0..b9cfbebdfe9 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -26,6 +26,7 @@ #include <linux/dm9000.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -47,7 +48,6 @@ #include <mach/irda.h> #include <mach/ohci.h> #include <mach/smemc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" @@ -516,9 +516,9 @@ static void __init trizeps4_init(void) pxa_set_stuart_info(NULL); if (0) /* dont know how to determine LCD */ - set_pxa_fb_info(&sharp_lcd); + pxa_set_fb_info(NULL, &sharp_lcd); else - set_pxa_fb_info(&toshiba_lcd); + pxa_set_fb_info(NULL, &toshiba_lcd); pxa_set_mci_info(&trizeps4_mci_platform_data); #ifndef STATUS_LEDS_ON_STUART_PINS diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 49eeeab2368..b523f119e0f 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -36,6 +36,7 @@ #include <linux/gpio.h> #include <linux/jiffies.h> #include <linux/i2c-gpio.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/serial_8250.h> #include <linux/smc91x.h> #include <linux/pwm_backlight.h> @@ -47,7 +48,6 @@ #include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/regs-uart.h> #include <mach/arcom-pcmcia.h> #include <mach/viper.h> @@ -310,14 +310,14 @@ static void __init viper_init_irq(void) /* setup ISA IRQs */ for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) { isa_irq = viper_bit_to_irq(level); - set_irq_chip(isa_irq, &viper_irq_chip); - set_irq_handler(isa_irq, handle_edge_irq); + irq_set_chip_and_handler(isa_irq, &viper_irq_chip, + handle_edge_irq); set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE); } - set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO), + irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO), viper_irq_handler); - set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH); } /* Flat Panel */ @@ -932,7 +932,7 @@ static void __init viper_init(void) /* Wake-up serial console */ viper_init_serial_gpio(); - set_pxa_fb_info(&fb_info); + pxa_set_fb_info(NULL, &fb_info); /* v1 hardware cannot use the datacs line */ version = viper_hw_version(); diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index b9b579715ff..f71d377c864 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -26,6 +26,7 @@ #include <linux/ucb1400.h> #include <linux/ata_platform.h> #include <linux/regulator/max1586.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,8 +41,6 @@ #include <mach/udc.h> #include <mach/pata_pxa.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" @@ -573,7 +572,7 @@ static void __init vpac270_lcd_init(void) } vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power; - set_pxa_fb_info(&vpac270_lcd_screen); + pxa_set_fb_info(NULL, &vpac270_lcd_screen); return; err2: diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 51c0281c6e0..f55f8f2e0db 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/smc91x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -26,8 +27,6 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <plat/i2c.h> - #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa25x.h> diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index a323e076129..fbe9e02e2f9 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -29,6 +29,7 @@ #include <linux/gpio_keys.h> #include <linux/delay.h> #include <linux/regulator/machine.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,8 +41,6 @@ #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" @@ -92,13 +91,13 @@ static unsigned long z2_pin_config[] = { GPIO47_STUART_TXD, /* Keypad */ - GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, - GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, - GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, - GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, - GPIO38_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, - GPIO16_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, - GPIO17_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO34_KP_MKIN_3, + GPIO38_KP_MKIN_4, + GPIO16_KP_MKIN_5, + GPIO17_KP_MKIN_6, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -139,8 +138,7 @@ static unsigned long z2_pin_config[] = { GPIO1_GPIO, /* Power button */ GPIO37_GPIO, /* Headphone detect */ GPIO98_GPIO, /* Lid switch */ - GPIO14_GPIO, /* WiFi Reset */ - GPIO15_GPIO, /* WiFi Power */ + GPIO14_GPIO, /* WiFi Power */ GPIO24_GPIO, /* WiFi CS */ GPIO36_GPIO, /* WiFi IRQ */ GPIO88_GPIO, /* LCD CS */ @@ -205,7 +203,7 @@ static struct platform_pwm_backlight_data z2_backlight_data[] = { /* Keypad Backlight */ .pwm_id = 1, .max_brightness = 1023, - .dft_brightness = 512, + .dft_brightness = 0, .pwm_period_ns = 1260320, }, [1] = { @@ -272,7 +270,7 @@ static struct pxafb_mach_info z2_lcd_screen = { static void __init z2_lcd_init(void) { - set_pxa_fb_info(&z2_lcd_screen); + pxa_set_fb_info(NULL, &z2_lcd_screen); } #else static inline void z2_lcd_init(void) {} @@ -310,12 +308,12 @@ struct gpio_led z2_gpio_leds[] = { .active_low = 1, }, { .name = "z2:green:charged", - .default_trigger = "none", + .default_trigger = "mmc0", .gpio = GPIO85_ZIPITZ2_LED_CHARGED, .active_low = 1, }, { .name = "z2:amber:charging", - .default_trigger = "none", + .default_trigger = "Z2-charging-or-full", .gpio = GPIO83_ZIPITZ2_LED_CHARGING, .active_low = 1, }, @@ -428,8 +426,22 @@ static inline void z2_mkp_init(void) {} ******************************************************************************/ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) static struct gpio_keys_button z2_pxa_buttons[] = { - {KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" }, - {KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" }, + { + .code = KEY_POWER, + .gpio = GPIO1_ZIPITZ2_POWER_BUTTON, + .active_low = 0, + .desc = "Power Button", + .wakeup = 1, + .type = EV_KEY, + }, + { + .code = SW_LID, + .gpio = GPIO98_ZIPITZ2_LID_BUTTON, + .active_low = 1, + .desc = "Lid Switch", + .wakeup = 0, + .type = EV_SW, + }, }; static struct gpio_keys_platform_data z2_pxa_keys_data = { @@ -462,9 +474,9 @@ static struct z2_battery_info batt_chip_info = { .batt_I2C_addr = 0x55, .batt_I2C_reg = 2, .charge_gpio = GPIO0_ZIPITZ2_AC_DETECT, - .min_voltage = 2400000, - .max_voltage = 3700000, - .batt_div = 69, + .min_voltage = 3475000, + .max_voltage = 4190000, + .batt_div = 59, .batt_mult = 1000000, .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION, .batt_name = "Z2", @@ -498,26 +510,16 @@ static int z2_lbs_spi_setup(struct spi_device *spi) { int ret = 0; - ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power"); + ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power"); if (ret) goto err; - ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1); + ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1); if (ret) goto err2; - ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset"); - if (ret) - goto err2; - - ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0); - if (ret) - goto err3; - - /* Reset the card */ + /* Wait until card is powered on */ mdelay(180); - gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1); - mdelay(20); spi->bits_per_word = 16; spi->mode = SPI_MODE_2, @@ -526,22 +528,18 @@ static int z2_lbs_spi_setup(struct spi_device *spi) return 0; -err3: - gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); err2: - gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); + gpio_free(GPIO14_ZIPITZ2_WIFI_POWER); err: return ret; }; static int z2_lbs_spi_teardown(struct spi_device *spi) { - gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0); - gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0); - gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); - gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); - return 0; + gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0); + gpio_free(GPIO14_ZIPITZ2_WIFI_POWER); + return 0; }; static struct pxa2xx_spi_chip z2_lbs_chip_info = { diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index b92aa3b8c4f..00363c7ac18 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -25,6 +25,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/apm-emulation.h> #include <linux/can/platform/mcp251x.h> @@ -33,8 +34,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/i2c.h> - #include <mach/pxa2xx-regs.h> #include <mach/regs-uart.h> #include <mach/ohci.h> @@ -137,22 +136,23 @@ static void __init zeus_init_irq(void) /* Peripheral IRQs. It would be nice to move those inside driver configuration, but it is not supported at the moment. */ - set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO), IRQ_TYPE_EDGE_FALLING); - set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO), + IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING); /* Setup ISA IRQs */ for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) { isa_irq = zeus_bit_to_irq(level); - set_irq_chip(isa_irq, &zeus_irq_chip); - set_irq_handler(isa_irq, handle_edge_irq); + irq_set_chip_and_handler(isa_irq, &zeus_irq_chip, + handle_edge_irq); set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE); } - set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING); - set_irq_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler); + irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING); + irq_set_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler); } @@ -847,7 +847,7 @@ static void __init zeus_init(void) if (zeus_setup_fb_gpios()) pr_err("Failed to setup fb gpios\n"); else - set_pxa_fb_info(&zeus_fb_info); + pxa_set_fb_info(NULL, &zeus_fb_info); pxa_set_mci_info(&zeus_mci_platform_data); pxa_set_udc_info(&zeus_udc_info); diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index a4c784aab76..5821185f77a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -208,7 +208,7 @@ static void __init zylonite_init_lcd(void) platform_device_register(&zylonite_backlight_device); if (lcd_id & 0x20) { - set_pxa_fb_info(&zylonite_sharp_lcd_info); + pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info); return; } @@ -220,7 +220,7 @@ static void __init zylonite_init_lcd(void) else zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode; - set_pxa_fb_info(&zylonite_toshiba_lcd_info); + pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info); } #else static inline void zylonite_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 3aa73b3e33f..93c64d8d7de 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -17,11 +17,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/gpio.h> #include <mach/pxa300.h> -#include <plat/i2c.h> #include <mach/zylonite.h> #include "generic.h" diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index a01b76b7c95..541fa4c109e 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -8,6 +8,5 @@ obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 1c6602cf50e..75dbc8791d0 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -51,6 +51,7 @@ #include <mach/irqs.h> #include <asm/hardware/timer-sp.h> +#include <plat/clcd.h> #include <plat/sched_clock.h> #include "core.h" @@ -359,18 +360,19 @@ static struct clk_lookup lookups[] = { } }; -static int __init clk_init(void) +void __init realview_init_early(void) { + void __iomem *sys = __io_address(REALVIEW_SYS_BASE); + if (machine_is_realview_pb1176()) - oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; + oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET; else - oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; + oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET; clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - return 0; + versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000); } -core_initcall(clk_init); /* * CLCD support. @@ -385,157 +387,6 @@ core_initcall(clk_init); #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) #define SYS_CLCD_ID_VGA (0x1f << 8) -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel xvga = { - .mode = { - .name = "XVGA", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15748, - .left_margin = 152, - .right_margin = 48, - .upper_margin = 23, - .lower_margin = 3, - .hsync_len = 104, - .vsync_len = 4, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_3_8_in = { - .mode = { - .name = "Sanyo QVGA", - .refresh = 116, - .xres = 320, - .yres = 240, - .pixclock = 100000, - .left_margin = 6, - .right_margin = 6, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 6, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_2_5_in = { - .mode = { - .name = "Sanyo QVGA Portrait", - .refresh = 116, - .xres = 240, - .yres = 320, - .pixclock = 100000, - .left_margin = 20, - .right_margin = 10, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 10, - .vsync_len = 2, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel epson_2_2_in = { - .mode = { - .name = "Epson QCIF", - .refresh = 390, - .xres = 176, - .yres = 220, - .pixclock = 62500, - .left_margin = 3, - .right_margin = 2, - .upper_margin = 1, - .lower_margin = 0, - .hsync_len = 3, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static struct clcd_panel *realview_clcd_panel(void) -{ - void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; - struct clcd_panel *vga_panel; - struct clcd_panel *panel; - u32 val; - - if (machine_is_realview_eb()) - vga_panel = &vga; - else - vga_panel = &xvga; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel = &sanyo_3_8_in; - else if (val == SYS_CLCD_ID_SANYO_2_5) - panel = &sanyo_2_5_in; - else if (val == SYS_CLCD_ID_EPSON_2_2) - panel = &epson_2_2_in; - else if (val == SYS_CLCD_ID_VGA) - panel = vga_panel; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel = vga_panel; - } - - return panel; -} - /* * Disable all display connectors on the interface module. */ @@ -565,56 +416,60 @@ static void realview_clcd_enable(struct clcd_fb *fb) writel(val, sys_clcd); } +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ static int realview_clcd_setup(struct clcd_fb *fb) { + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + const char *panel_name, *vga_panel_name; unsigned long framesize; - dma_addr_t dma; + u32 val; - if (machine_is_realview_eb()) + if (machine_is_realview_eb()) { /* VGA, 16bpp */ framesize = 640 * 480 * 2; - else + vga_panel_name = "VGA"; + } else { /* XVGA, 16bpp */ framesize = 1024 * 768 * 2; - - fb->panel = realview_clcd_panel(); - - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL | GFP_DMA); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; + vga_panel_name = "XVGA"; } - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel_name = "Sanyo TM38QV67A02A"; + else if (val == SYS_CLCD_ID_SANYO_2_5) + panel_name = "Sanyo QVGA Portrait"; + else if (val == SYS_CLCD_ID_EPSON_2_2) + panel_name = "Epson L2F50113T00"; + else if (val == SYS_CLCD_ID_VGA) + panel_name = vga_panel_name; + else { + pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val); + panel_name = vga_panel_name; + } -static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} + fb->panel = versatile_clcd_get_panel(panel_name); + if (!fb->panel) + return -EINVAL; -static void realview_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, framesize); } struct clcd_board clcd_plat_data = { .name = "RealView", + .caps = CLCD_CAP_ALL, .check = clcdfb_check, .decode = clcdfb_decode, .disable = realview_clcd_disable, .enable = realview_clcd_enable, .setup = realview_clcd_setup, - .mmap = realview_clcd_mmap, - .remove = realview_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; #ifdef CONFIG_LEDS @@ -656,12 +511,6 @@ void realview_leds_event(led_event_t ledevt) #endif /* CONFIG_LEDS */ /* - * The sched_clock counter - */ -#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + \ - REALVIEW_SYS_24MHz_OFFSET) - -/* * Where is the timer (VA)? */ void __iomem *timer0_va_base; @@ -676,8 +525,6 @@ void __init realview_timer_init(unsigned int timer_irq) { u32 val; - versatile_sched_clock_init(REFCOUNTER, 24000000); - /* * set clock frequency: * REALVIEW_REFCLK is 32KHz diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 693239ddc39..5c83d1e87a0 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -42,7 +42,6 @@ static struct amba_device name##_device = { \ }, \ .dma_mask = ~0, \ .irq = base##_IRQ, \ - /* .dma = base##_DMA,*/ \ } struct machine_desc; @@ -63,6 +62,7 @@ extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); +extern void realview_init_early(void); extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, struct meminfo *meminfo); extern void (*realview_reset)(char); diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S deleted file mode 100644 index b34be4554d4..00000000000 --- a/arch/arm/mach-realview/headsmp.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/arch/arm/mach-realview/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - - __INIT - -/* - * Realview specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(realview_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h index 0c5d749d7b5..9a732195aa1 100644 --- a/arch/arm/mach-realview/include/mach/barriers.h +++ b/arch/arm/mach-realview/include/mach/barriers.h @@ -4,5 +4,5 @@ * operation to deadlock the system. */ #define mb() dsb() -#define rmb() dmb() +#define rmb() dsb() #define wmb() mb() diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c deleted file mode 100644 index 60b4e111f45..00000000000 --- a/arch/arm/mach-realview/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/arch/arm/mach-realview/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/clockchips.h> - -#include <asm/irq.h> -#include <asm/smp_twd.h> -#include <asm/localtimer.h> - -/* - * Setup the local clock events for a CPU. - */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); -} diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 6959d13d908..23919229e12 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -10,44 +10,21 @@ */ #include <linux/init.h> #include <linux/errno.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <asm/cacheflush.h> #include <mach/hardware.h> #include <asm/mach-types.h> +#include <asm/smp_scu.h> #include <asm/unified.h> #include <mach/board-eb.h> #include <mach/board-pb11mp.h> #include <mach/board-pbx.h> -#include <asm/smp_scu.h> #include "core.h" -extern void realview_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int __cpuinitdata pen_release = -1; - -/* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency - * or not. This is necessary for the hotplug code to work reliably. - */ -static void __cpuinit write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); - outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); -} +extern void versatile_secondary_startup(void); static void __iomem *scu_base_addr(void) { @@ -62,75 +39,6 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0; } -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - write_pen_release(cpu); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - smp_cross_call(cpumask_of(cpu), 1); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. @@ -174,6 +82,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), + __raw_writel(BSYM(virt_to_phys(versatile_secondary_startup)), __io_address(REALVIEW_SYS_FLAGSSET)); } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 8ede983b861..10e75faba4c 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -144,60 +144,39 @@ static struct pl022_ssp_controller ssp0_plat_data = { * These devices are connected via the core APB bridge */ #define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_EB_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } /* * These devices are connected directly to the multi-layer AHB switch */ #define EB_SMC_IRQ { NO_IRQ, NO_IRQ } -#define EB_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } -#define EB_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } -#define DMAC_DMA { 0, 0 } /* * These devices are connected via the core APB bridge */ #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } -#define EB_WATCHDOG_DMA { 0, 0 } #define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } -#define EB_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } -#define EB_RTC_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge */ #define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } -#define EB_UART0_DMA { 15, 14 } #define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } -#define EB_UART1_DMA { 13, 12 } #define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } -#define EB_UART2_DMA { 11, 10 } #define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } -#define EB_UART3_DMA { 0x86, 0x87 } #define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } -#define EB_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); @@ -369,7 +348,7 @@ static void __init gic_init_irq(void) #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB /* board GIC, secondary */ - gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE), + gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE), __io_address(REALVIEW_EB_GIC_CPU_BASE)); gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1); #endif @@ -487,6 +466,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_eb_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_eb_timer, .init_machine = realview_eb_init, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 9f26369555c..eab6070f66d 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -134,47 +134,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PB1176 AMBA devices */ #define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } -#define PB1176_CLCD_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } -#define PB1176_WATCHDOG_DMA { 0, 0 } #define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } -#define PB1176_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } -#define PB1176_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } -#define PB1176_UART0_DMA { 15, 14 } #define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } -#define PB1176_UART1_DMA { 13, 12 } #define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } -#define PB1176_UART2_DMA { 11, 10 } #define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } -#define PB1176_UART3_DMA { 0x86, 0x87 } #define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } -#define PB1176_UART4_DMA { 0, 0 } #define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } -#define PB1176_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); @@ -382,6 +361,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, .init_machine = realview_pb1176_init, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index dea06b2da3a..b2985fc7cd4 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -136,47 +136,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } -#define PB11MP_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } -#define PB11MP_WATCHDOG_DMA { 0, 0 } #define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } -#define PB11MP_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } -#define PB11MP_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } -#define PB11MP_UART0_DMA { 15, 14 } #define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } -#define PB11MP_UART1_DMA { 13, 12 } #define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } -#define PB11MP_UART2_DMA { 11, 10 } #define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } -#define PB11MP_UART3_DMA { 0x86, 0x87 } #define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } -#define PB11MP_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); @@ -384,6 +363,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, .init_machine = realview_pb11mp_init, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 7d0f1734a21..fb686655876 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -126,47 +126,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } -#define PBA8_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } -#define PBA8_WATCHDOG_DMA { 0, 0 } #define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } -#define PBA8_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } -#define PBA8_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } -#define PBA8_UART0_DMA { 15, 14 } #define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } -#define PBA8_UART1_DMA { 13, 12 } #define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } -#define PBA8_UART2_DMA { 11, 10 } #define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } -#define PBA8_UART3_DMA { 0x86, 0x87 } #define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } -#define PBA8_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); @@ -334,6 +313,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pba8_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pba8_timer, .init_machine = realview_pba8_init, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index b89e28f8853..92ace2cf2b2 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -148,47 +148,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PBX_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } -#define PBX_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } -#define PBX_WATCHDOG_DMA { 0, 0 } #define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } -#define PBX_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } -#define PBX_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } -#define PBX_UART0_DMA { 15, 14 } #define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } -#define PBX_UART1_DMA { 13, 12 } #define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } -#define PBX_UART2_DMA { 11, 10 } #define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } -#define PBX_UART3_DMA { 0x86, 0x87 } #define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } -#define PBX_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); @@ -417,6 +396,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, .init_machine = realview_pbx_init, diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c index d29cd9b737f..2e1b5309fba 100644 --- a/arch/arm/mach-rpc/irq.c +++ b/arch/arm/mach-rpc/irq.c @@ -133,25 +133,25 @@ void __init rpc_init_irq(void) switch (irq) { case 0 ... 7: - set_irq_chip(irq, &iomd_a_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &iomd_a_chip, + handle_level_irq); set_irq_flags(irq, flags); break; case 8 ... 15: - set_irq_chip(irq, &iomd_b_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &iomd_b_chip, + handle_level_irq); set_irq_flags(irq, flags); break; case 16 ... 21: - set_irq_chip(irq, &iomd_dma_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &iomd_dma_chip, + handle_level_irq); set_irq_flags(irq, flags); break; case 64 ... 71: - set_irq_chip(irq, &iomd_fiq_chip); + irq_set_chip(irq, &iomd_fiq_chip); set_irq_flags(irq, IRQF_VALID); break; } diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 606cb6b1cc4..bc53d2d16d1 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -147,15 +147,15 @@ static __init int bast_irq_init(void) __raw_writeb(0x0, BAST_VA_PC104_IRQMASK); - set_irq_chained_handler(IRQ_ISA, bast_irq_pc104_demux); + irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux); /* register our IRQs */ for (i = 0; i < 4; i++) { unsigned int irqno = bast_pc104_irqs[i]; - set_irq_chip(irqno, &bast_pc104_chip); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &bast_pc104_chip, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } } diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 6b86a722a7d..2c126bbca08 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -18,12 +18,14 @@ #include <linux/leds.h> #include <linux/gpio.h> #include <linux/rfkill.h> +#include <linux/leds.h> #include <mach/regs-gpio.h> #include <mach/hardware.h> #include <mach/h1940-latch.h> +#include <mach/h1940.h> -#define DRV_NAME "h1940-bt" +#define DRV_NAME "h1940-bt" /* Bluetooth control */ static void h1940bt_enable(int on) @@ -37,6 +39,8 @@ static void h1940bt_enable(int on) gpio_set_value(S3C2410_GPH(1), 1); mdelay(10); gpio_set_value(S3C2410_GPH(1), 0); + + h1940_led_blink_set(-EINVAL, GPIO_LED_BLINK, NULL, NULL); } else { gpio_set_value(S3C2410_GPH(1), 1); @@ -44,6 +48,8 @@ static void h1940bt_enable(int on) gpio_set_value(S3C2410_GPH(1), 0); mdelay(10); gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0); + + h1940_led_blink_set(-EINVAL, GPIO_LED_NO_BLINK_LOW, NULL, NULL); } } @@ -85,7 +91,6 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); - rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, &h1940bt_rfkill_ops, NULL); if (!rfk) { @@ -93,8 +98,6 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) goto err_rfk_alloc; } - rfkill_set_led_trigger_name(rfk, "h1940-bluetooth"); - ret = rfkill_register(rfk); if (ret) goto err_rfkill; diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index cf68136cc66..b2b2a5bb275 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -19,7 +19,7 @@ #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ /* We use `virtual` dma channels to hide the fact we have only a limited - * number of DMA channels, and not of all of them (dependant on the device) + * number of DMA channels, and not of all of them (dependent on the device) * can be attached to any DMA source. We therefore let the DMA core handle * the allocation of hardware channels to clients. */ diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c2410/include/mach/h1940.h index 4559784129c..2aa683c8d3d 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940.h +++ b/arch/arm/mach-s3c2410/include/mach/h1940.h @@ -17,5 +17,8 @@ #define H1940_SUSPEND_CHECK (0x30080000) extern void h1940_pm_return(void); +extern int h1940_led_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off); + #endif /* __ASM_ARCH_H1940_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 7f7c5294796..988a6863e54 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -101,7 +101,7 @@ #define S3C2410_BANKCON_PMC16 (0x03) /* bank configurations for banks 0..7, note banks - * 6 and 7 have differnt configurations depending on + * 6 and 7 have different configurations depending on * the memory type bits */ #define S3C2410_BANKCON_Tacp2 (0x0 << 2) diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 1e93f176c1d..2a2fa062013 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -23,8 +23,15 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/pda_power.h> +#include <linux/s3c_adc_battery.h> +#include <linux/delay.h> + #include <video/platform_lcd.h> #include <linux/mmc/host.h> @@ -203,20 +210,239 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = { .num_displays = 1, .default_display = 0, - .lpcsel= 0x02, - .gpccon= 0xaa940659, - .gpccon_mask= 0xffffffff, - .gpcup= 0x0000ffff, - .gpcup_mask= 0xffffffff, - .gpdcon= 0xaa84aaa0, - .gpdcon_mask= 0xffffffff, - .gpdup= 0x0000faff, - .gpdup_mask= 0xffffffff, + .lpcsel = 0x02, + .gpccon = 0xaa940659, + .gpccon_mask = 0xffffc0f0, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + .gpdcon = 0xaa84aaa0, + .gpdcon_mask = 0xffffffff, + .gpdup = 0x0000faff, + .gpdup_mask = 0xffffffff, }; -static struct platform_device h1940_device_leds = { - .name = "h1940-leds", +static int power_supply_init(struct device *dev) +{ + return gpio_request(S3C2410_GPF(2), "cable plugged"); +} + +static int h1940_is_ac_online(void) +{ + return !gpio_get_value(S3C2410_GPF(2)); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(S3C2410_GPF(2)); +} + +static char *h1940_supplicants[] = { + "main-battery", + "backup-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = h1940_is_ac_online, + .exit = power_supply_exit, + .supplied_to = h1940_supplicants, + .num_supplicants = ARRAY_SIZE(h1940_supplicants), +}; + +static struct resource power_supply_resources[] = { + [0] = { + .name = "ac", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | + IORESOURCE_IRQ_HIGHEDGE, + .start = IRQ_EINT2, + .end = IRQ_EINT2, + }, +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = + &power_supply_info, + }, + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), +}; + +static const struct s3c_adc_bat_thresh bat_lut_noac[] = { + { .volt = 4070, .cur = 162, .level = 100}, + { .volt = 4040, .cur = 165, .level = 95}, + { .volt = 4016, .cur = 164, .level = 90}, + { .volt = 3996, .cur = 166, .level = 85}, + { .volt = 3971, .cur = 168, .level = 80}, + { .volt = 3951, .cur = 168, .level = 75}, + { .volt = 3931, .cur = 170, .level = 70}, + { .volt = 3903, .cur = 172, .level = 65}, + { .volt = 3886, .cur = 172, .level = 60}, + { .volt = 3858, .cur = 176, .level = 55}, + { .volt = 3842, .cur = 176, .level = 50}, + { .volt = 3818, .cur = 176, .level = 45}, + { .volt = 3789, .cur = 180, .level = 40}, + { .volt = 3769, .cur = 180, .level = 35}, + { .volt = 3749, .cur = 184, .level = 30}, + { .volt = 3732, .cur = 184, .level = 25}, + { .volt = 3716, .cur = 184, .level = 20}, + { .volt = 3708, .cur = 184, .level = 15}, + { .volt = 3716, .cur = 96, .level = 10}, + { .volt = 3700, .cur = 96, .level = 5}, + { .volt = 3684, .cur = 96, .level = 0}, +}; + +static const struct s3c_adc_bat_thresh bat_lut_acin[] = { + { .volt = 4130, .cur = 0, .level = 100}, + { .volt = 3982, .cur = 0, .level = 50}, + { .volt = 3854, .cur = 0, .level = 10}, + { .volt = 3841, .cur = 0, .level = 0}, +}; + +int h1940_bat_init(void) +{ + int ret; + + ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable"); + if (ret) + return ret; + gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0); + + return 0; + +} + +void h1940_bat_exit(void) +{ + gpio_free(H1940_LATCH_SM803_ENABLE); +} + +void h1940_enable_charger(void) +{ + gpio_set_value(H1940_LATCH_SM803_ENABLE, 1); +} + +void h1940_disable_charger(void) +{ + gpio_set_value(H1940_LATCH_SM803_ENABLE, 0); +} + +static struct s3c_adc_bat_pdata h1940_bat_cfg = { + .init = h1940_bat_init, + .exit = h1940_bat_exit, + .enable_charger = h1940_enable_charger, + .disable_charger = h1940_disable_charger, + .gpio_charge_finished = S3C2410_GPF(3), + .gpio_inverted = 1, + .lut_noac = bat_lut_noac, + .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac), + .lut_acin = bat_lut_acin, + .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin), + .volt_channel = 0, + .current_channel = 1, + .volt_mult = 4056, + .current_mult = 1893, + .internal_impedance = 200, + .backup_volt_channel = 3, + /* TODO Check backup volt multiplier */ + .backup_volt_mult = 4056, + .backup_volt_min = 0, + .backup_volt_max = 4149288 +}; + +static struct platform_device h1940_battery = { + .name = "s3c-adc-battery", .id = -1, + .dev = { + .parent = &s3c_device_adc.dev, + .platform_data = &h1940_bat_cfg, + }, +}; + +DEFINE_SPINLOCK(h1940_blink_spin); + +int h1940_led_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off) +{ + int blink_gpio, check_gpio1, check_gpio2; + + switch (gpio) { + case H1940_LATCH_LED_GREEN: + blink_gpio = S3C2410_GPA(7); + check_gpio1 = S3C2410_GPA(1); + check_gpio2 = S3C2410_GPA(3); + break; + case H1940_LATCH_LED_RED: + blink_gpio = S3C2410_GPA(1); + check_gpio1 = S3C2410_GPA(7); + check_gpio2 = S3C2410_GPA(3); + break; + default: + blink_gpio = S3C2410_GPA(3); + check_gpio1 = S3C2410_GPA(1); + check_gpio1 = S3C2410_GPA(7); + break; + } + + if (delay_on && delay_off && !*delay_on && !*delay_off) + *delay_on = *delay_off = 500; + + spin_lock(&h1940_blink_spin); + + switch (state) { + case GPIO_LED_NO_BLINK_LOW: + case GPIO_LED_NO_BLINK_HIGH: + if (!gpio_get_value(check_gpio1) && + !gpio_get_value(check_gpio2)) + gpio_set_value(H1940_LATCH_LED_FLASH, 0); + gpio_set_value(blink_gpio, 0); + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, state); + break; + case GPIO_LED_BLINK: + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, 0); + gpio_set_value(H1940_LATCH_LED_FLASH, 1); + gpio_set_value(blink_gpio, 1); + break; + } + + spin_unlock(&h1940_blink_spin); + + return 0; +} +EXPORT_SYMBOL(h1940_led_blink_set); + +static struct gpio_led h1940_leds_desc[] = { + { + .name = "Green", + .default_trigger = "main-battery-full", + .gpio = H1940_LATCH_LED_GREEN, + .retain_state_suspended = 1, + }, + { + .name = "Red", + .default_trigger + = "main-battery-charging-blink-full-solid", + .gpio = H1940_LATCH_LED_RED, + .retain_state_suspended = 1, + }, +}; + +static struct gpio_led_platform_data h1940_leds_pdata = { + .num_leds = ARRAY_SIZE(h1940_leds_desc), + .leds = h1940_leds_desc, + .gpio_blink_set = h1940_led_blink_set, +}; + +static struct platform_device h1940_device_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &h1940_leds_pdata, + }, }; static struct platform_device h1940_device_bluetooth = { @@ -302,14 +528,14 @@ static struct platform_device h1940_backlight = { static void h1940_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) { - int value; + int value, retries = 100; if (!power) { gpio_set_value(S3C2410_GPC(0), 0); /* wait for 3ac */ do { value = gpio_get_value(S3C2410_GPC(6)); - } while (value); + } while (value && retries--); gpio_set_value(H1940_LATCH_LCD_P2, 0); gpio_set_value(H1940_LATCH_LCD_P3, 0); @@ -327,6 +553,9 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd, gpio_set_value(H1940_LATCH_LCD_P0, 1); gpio_set_value(H1940_LATCH_LCD_P1, 1); + gpio_direction_input(S3C2410_GPC(1)); + gpio_direction_input(S3C2410_GPC(4)); + mdelay(10); s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2)); s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2)); @@ -362,7 +591,44 @@ static struct i2c_board_info h1940_i2c_devices[] = { }, }; +#define DECLARE_BUTTON(p, k, n, w) \ + { \ + .gpio = p, \ + .code = k, \ + .desc = n, \ + .wakeup = w, \ + .active_low = 1, \ + } + +static struct gpio_keys_button h1940_buttons[] = { + DECLARE_BUTTON(S3C2410_GPF(0), KEY_POWER, "Power", 1), + DECLARE_BUTTON(S3C2410_GPF(6), KEY_ENTER, "Select", 1), + DECLARE_BUTTON(S3C2410_GPF(7), KEY_RECORD, "Record", 0), + DECLARE_BUTTON(S3C2410_GPG(0), KEY_F11, "Calendar", 0), + DECLARE_BUTTON(S3C2410_GPG(2), KEY_F12, "Contacts", 0), + DECLARE_BUTTON(S3C2410_GPG(3), KEY_MAIL, "Mail", 0), + DECLARE_BUTTON(S3C2410_GPG(6), KEY_LEFT, "Left_arrow", 0), + DECLARE_BUTTON(S3C2410_GPG(7), KEY_HOMEPAGE, "Home", 0), + DECLARE_BUTTON(S3C2410_GPG(8), KEY_RIGHT, "Right_arrow", 0), + DECLARE_BUTTON(S3C2410_GPG(9), KEY_UP, "Up_arrow", 0), + DECLARE_BUTTON(S3C2410_GPG(10), KEY_DOWN, "Down_arrow", 0), +}; + +static struct gpio_keys_platform_data h1940_buttons_data = { + .buttons = h1940_buttons, + .nbuttons = ARRAY_SIZE(h1940_buttons), +}; + +static struct platform_device h1940_dev_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &h1940_buttons_data, + } +}; + static struct platform_device *h1940_devices[] __initdata = { + &h1940_dev_buttons, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -379,6 +645,8 @@ static struct platform_device *h1940_devices[] __initdata = { &h1940_lcd_powerdev, &s3c_device_adc, &s3c_device_ts, + &power_supply, + &h1940_battery, }; static void __init h1940_map_io(void) @@ -461,6 +729,15 @@ static void __init h1940_init(void) platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); + gpio_request(S3C2410_GPA(1), "Red LED blink"); + gpio_request(S3C2410_GPA(3), "Blue LED blink"); + gpio_request(S3C2410_GPA(7), "Green LED blink"); + gpio_request(H1940_LATCH_LED_FLASH, "LED blink"); + gpio_direction_output(S3C2410_GPA(1), 0); + gpio_direction_output(S3C2410_GPA(3), 0); + gpio_direction_output(S3C2410_GPA(7), 0); + gpio_direction_output(H1940_LATCH_LED_FLASH, 0); + i2c_register_board_info(0, h1940_i2c_devices, ARRAY_SIZE(h1940_i2c_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 66f44440d5d..079dcaa602d 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -252,7 +252,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = { .def_trigger = "", }; -/* This is the blue LED on the device. Originaly used to indicate GPS activity +/* This is the blue LED on the device. Originally used to indicate GPS activity * by flashing. */ static struct s3c24xx_led_platdata n35_blue_led_pdata = { .name = "blue_led", diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index eddb52ba5b6..f3355d2ec63 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -175,18 +175,18 @@ static int s3c2412_irq_add(struct sys_device *sysdev) unsigned int irqno; for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - set_irq_chip(irqno, &s3c2412_irq_eint0t4); - set_irq_handler(irqno, handle_edge_irq); + irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4, + handle_edge_irq); set_irq_flags(irqno, IRQF_VALID); } /* add demux support for CF/SDI */ - set_irq_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi); + irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi); for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) { - set_irq_chip(irqno, &s3c2412_irq_cfsdi); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } @@ -195,7 +195,7 @@ static int s3c2412_irq_add(struct sys_device *sysdev) s3c2412_irq_rtc_chip = s3c_irq_chip; s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake; - set_irq_chip(IRQ_RTC, &s3c2412_irq_rtc_chip); + irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip); return 0; } diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 680fe386aca..77b38f2381c 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -202,13 +202,11 @@ static int __init s3c2416_add_sub(unsigned int base, { unsigned int irqno; - set_irq_chip(base, &s3c_irq_level_chip); - set_irq_handler(base, handle_level_irq); - set_irq_chained_handler(base, demux); + irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq); + irq_set_chained_handler(base, demux); for (irqno = start; irqno <= end; irqno++) { - set_irq_chip(irqno, chip); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, chip, handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index acad4428bef..eb1cc0f0705 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -100,13 +100,13 @@ static int s3c2440_irq_add(struct sys_device *sysdev) /* add new chained handler for wdt, ac7 */ - set_irq_chip(IRQ_WDT, &s3c_irq_level_chip); - set_irq_handler(IRQ_WDT, handle_level_irq); - set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); + irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip, + handle_level_irq); + irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - set_irq_chip(irqno, &s3c_irq_wdtac97); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 0db2411ef4b..716662008ce 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -409,6 +409,10 @@ struct platform_device s3c24xx_pwm_device = { .num_resources = 0, }; +static struct platform_device gta02_dfbmcs320_device = { + .name = "dfbmcs320", +}; + static struct i2c_board_info gta02_i2c_devs[] __initdata = { { I2C_BOARD_INFO("pcf50633", 0x73), @@ -523,6 +527,7 @@ static struct platform_device *gta02_devices[] __initdata = { &s3c_device_iis, &samsung_asoc_dma, &s3c_device_i2c0, + >a02_dfbmcs320_device, >a02_buttons_device, &s3c_device_adc, &s3c_device_ts, diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index d80f129bca9..dd3120df09f 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -155,7 +155,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { * the same timings, however, anything smaller than 1024x768 * will only be displayed in the top left corner of a 1024x768 * XGA output unless you add optional dip switches to the shield. - * Therefore timings for other resolutions have been ommited here. + * Therefore timings for other resolutions have been omitted here. */ [2] = { _LCD_DECLARE( @@ -488,6 +488,11 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = { }, }; +static struct platform_device uda1340_codec = { + .name = "uda134x-codec", + .id = -1, +}; + static struct platform_device *mini2440_devices[] __initdata = { &s3c_device_ohci, &s3c_device_wdt, @@ -503,7 +508,9 @@ static struct platform_device *mini2440_devices[] __initdata = { &s3c_device_nand, &s3c_device_sdi, &s3c_device_iis, + &uda1340_codec, &mini2440_audio, + &samsung_asoc_dma, }; static void __init mini2440_map_io(void) diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 86bbc233b31..27ea95096fe 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -263,27 +263,78 @@ void rx1950_disable_charger(void) gpio_direction_output(S3C2410_GPJ(3), 0); } +DEFINE_SPINLOCK(rx1950_blink_spin); + +static int rx1950_led_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off) +{ + int blink_gpio, check_gpio; + + switch (gpio) { + case S3C2410_GPA(6): + blink_gpio = S3C2410_GPA(4); + check_gpio = S3C2410_GPA(3); + break; + case S3C2410_GPA(7): + blink_gpio = S3C2410_GPA(3); + check_gpio = S3C2410_GPA(4); + break; + default: + return -EINVAL; + break; + } + + if (delay_on && delay_off && !*delay_on && !*delay_off) + *delay_on = *delay_off = 500; + + spin_lock(&rx1950_blink_spin); + + switch (state) { + case GPIO_LED_NO_BLINK_LOW: + case GPIO_LED_NO_BLINK_HIGH: + if (!gpio_get_value(check_gpio)) + gpio_set_value(S3C2410_GPJ(6), 0); + gpio_set_value(blink_gpio, 0); + gpio_set_value(gpio, state); + break; + case GPIO_LED_BLINK: + gpio_set_value(gpio, 0); + gpio_set_value(S3C2410_GPJ(6), 1); + gpio_set_value(blink_gpio, 1); + break; + } + + spin_unlock(&rx1950_blink_spin); + + return 0; +} + static struct gpio_led rx1950_leds_desc[] = { { - .name = "Green", - .default_trigger = "main-battery-charging-or-full", - .gpio = S3C2410_GPA(6), + .name = "Green", + .default_trigger = "main-battery-full", + .gpio = S3C2410_GPA(6), + .retain_state_suspended = 1, }, { - .name = "Red", - .default_trigger = "main-battery-full", - .gpio = S3C2410_GPA(7), + .name = "Red", + .default_trigger + = "main-battery-charging-blink-full-solid", + .gpio = S3C2410_GPA(7), + .retain_state_suspended = 1, }, { - .name = "Blue", + .name = "Blue", .default_trigger = "rx1950-acx-mem", - .gpio = S3C2410_GPA(11), + .gpio = S3C2410_GPA(11), + .retain_state_suspended = 1, }, }; static struct gpio_led_platform_data rx1950_leds_pdata = { .num_leds = ARRAY_SIZE(rx1950_leds_desc), .leds = rx1950_leds_desc, + .gpio_blink_set = rx1950_led_blink_set, }; static struct platform_device rx1950_leds = { @@ -752,6 +803,13 @@ static void __init rx1950_init_machine(void) WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power")); + WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink")); + WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink")); + WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink")); + gpio_direction_output(S3C2410_GPA(3), 0); + gpio_direction_output(S3C2410_GPA(4), 0); + gpio_direction_output(S3C2410_GPJ(6), 0); + platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); i2c_register_board_info(0, rx1950_i2c_devices, diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c index 83daf4ece76..de07c2feaa3 100644 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ b/arch/arm/mach-s3c2440/s3c244x-irq.c @@ -95,19 +95,19 @@ static int s3c244x_irq_add(struct sys_device *sysdev) { unsigned int irqno; - set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip); - set_irq_handler(IRQ_NFCON, handle_level_irq); + irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip, + handle_level_irq); set_irq_flags(IRQ_NFCON, IRQF_VALID); /* add chained handler for camera */ - set_irq_chip(IRQ_CAM, &s3c_irq_level_chip); - set_irq_handler(IRQ_CAM, handle_level_irq); - set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam); + irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip, + handle_level_irq); + irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam); for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - set_irq_chip(irqno, &s3c_irq_cam); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &s3c_irq_cam, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index c7820f9c135..83ecb1173fb 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -230,13 +230,11 @@ static int __init s3c2443_add_sub(unsigned int base, { unsigned int irqno; - set_irq_chip(base, &s3c_irq_level_chip); - set_irq_handler(base, handle_level_irq); - set_irq_chained_handler(base, demux); + irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq); + irq_set_chained_handler(base, demux); for (irqno = start; irqno <= end; irqno++) { - set_irq_chip(irqno, chip); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, chip, handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index c35585cf8c4..b197171e7d0 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -315,7 +315,7 @@ int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) case S3C2410_DMAOP_FLUSH: return s3c64xx_dma_flush(chan); - /* belive PAUSE/RESUME are no-ops */ + /* believe PAUSE/RESUME are no-ops */ case S3C2410_DMAOP_PAUSE: case S3C2410_DMAOP_RESUME: case S3C2410_DMAOP_STARTED: diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c index 2ead8189da7..4d203be1f4c 100644 --- a/arch/arm/mach-s3c64xx/irq-eint.c +++ b/arch/arm/mach-s3c64xx/irq-eint.c @@ -197,16 +197,15 @@ static int __init s3c64xx_init_irq_eint(void) int irq; for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { - set_irq_chip(irq, &s3c_irq_eint); - set_irq_chip_data(irq, (void *)eint_irq_to_bit(irq)); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq); + irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq)); set_irq_flags(irq, IRQF_VALID); } - set_irq_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3); - set_irq_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11); - set_irq_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19); - set_irq_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27); + irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3); + irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11); + irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19); + irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27); return 0; } diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c index b8d02eb4cf3..a5c00952ea3 100644 --- a/arch/arm/mach-s5p64x0/cpu.c +++ b/arch/arm/mach-s5p64x0/cpu.c @@ -119,7 +119,7 @@ void __init s5p6450_map_io(void) s3c_adc_setname("s3c64xx-adc"); iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); - iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6440_iodesc)); + iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); } /* diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h index 4be4cc9abf7..07aa4d6054f 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h @@ -29,7 +29,7 @@ #define WPALCON_H (0x19c) #define WPALCON_L (0x1a0) -/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but +/* Palette control for WPAL0 and WPAL1 is the same as in S3C64xx, but * different for WPAL2-4 */ /* In WPALCON_L (aka WPALCON) */ diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c index f16946e456e..be25879bb2e 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -40,7 +40,7 @@ void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index 1f4b595534c..a5a1e331f8e 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -18,7 +18,7 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq -/* Practically, GPIO banks upto MP03 are the configurable gpio banks */ +/* Practically, GPIO banks up to MP03 are the configurable gpio banks */ /* GPIO bank sizes */ #define S5PV210_GPIO_A0_NR (8) diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 26710b35ef8..b9f9ec33384 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -99,9 +99,9 @@ #define IRQ_TC IRQ_PENDN #define IRQ_KEYPAD S5P_IRQ_VIC2(25) #define IRQ_CG S5P_IRQ_VIC2(26) -#define IRQ_SEC S5P_IRQ_VIC2(27) -#define IRQ_SECRX S5P_IRQ_VIC2(28) -#define IRQ_SECTX S5P_IRQ_VIC2(29) +#define IRQ_SSS_INT S5P_IRQ_VIC2(27) +#define IRQ_SSS_HASH S5P_IRQ_VIC2(28) +#define IRQ_PCM2 S5P_IRQ_VIC2(29) #define IRQ_SDMIRQ S5P_IRQ_VIC2(30) #define IRQ_SDMFIQ S5P_IRQ_VIC2(31) diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 243291722c6..31d5aa76975 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -15,7 +15,7 @@ #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> -#include <linux/i2c/qt602240_ts.h> +#include <linux/i2c/atmel_mxt_ts.h> #include <linux/mfd/max8998.h> #include <linux/mfd/wm8994/pdata.h> #include <linux/regulator/fixed.h> @@ -25,6 +25,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/interrupt.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -225,7 +226,7 @@ static void __init goni_radio_init(void) } /* TSP */ -static struct qt602240_platform_data qt602240_platform_data = { +static struct mxt_platform_data qt602240_platform_data = { .x_line = 17, .y_line = 11, .x_size = 800, @@ -233,7 +234,8 @@ static struct qt602240_platform_data qt602240_platform_data = { .blen = 0x21, .threshold = 0x28, .voltage = 2800000, /* 2.8V */ - .orient = QT602240_DIAGONAL, + .orient = MXT_DIAGONAL, + .irqflags = IRQF_TRIGGER_FALLING, }; static struct s3c2410_platform_i2c i2c2_data __initdata = { diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index bc08ac42e7c..c6a9e86c2d5 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -44,7 +44,6 @@ #include <plat/keypad.h> #include <plat/pm.h> #include <plat/fb.h> -#include <plat/gpio-cfg.h> #include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index 746777d56df..3e3ac05bb7b 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -32,10 +32,10 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: - /* GPG1[3:6] special-funtion 3 */ + /* GPG1[3:6] special-function 3 */ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3)); case 4: - /* GPG0[3:6] special-funtion 2 */ + /* GPG0[3:6] special-function 2 */ s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2)); default: break; diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c index c32e202731c..a83b6c909f6 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -38,7 +38,7 @@ void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index e697691eed2..41252d22e65 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -50,7 +50,7 @@ led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o # LEDs support obj-$(CONFIG_LEDS) += $(led-y) -# Miscelaneous functions +# Miscellaneous functions obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_SA1100_SSP) += ssp.o diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 98d780608c7..7f3da4b11ec 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = { static void __init cerf_init_irq(void) { sa1100_init_irq(); - set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING); } static struct map_desc cerf_io_desc[] __initdata = { diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 07d4e8ba371..aaa8acf76b7 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -68,7 +68,7 @@ * clock change in ROM and jump to that code from the kernel. The main * disadvantage is that the ROM has to be modified, which is not * possible on all SA-1100 platforms. Another disadvantage is that - * jumping to ROM makes clock switching unecessary complicated. + * jumping to ROM makes clock switching unnecessary complicated. * * The idea behind this driver is that the memory configuration can be * changed while running from DRAM (even with interrupts turned on!) diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h index 4f7ea012e1e..bae8296f5db 100644 --- a/arch/arm/mach-sa1100/include/mach/SA-1100.h +++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h @@ -1794,7 +1794,7 @@ (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR))) -#define DCSR_RUN 0x00000001 /* DMA RUNing */ +#define DCSR_RUN 0x00000001 /* DMA running */ #define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ #define DCSR_ERROR 0x00000004 /* DMA ERROR */ #define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 3d85dfad9c1..423ddb3d65e 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -323,28 +323,28 @@ void __init sa1100_init_irq(void) ICCR = 1; for (irq = 0; irq <= 10; irq++) { - set_irq_chip(irq, &sa1100_low_gpio_chip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &sa1100_low_gpio_chip, + handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } for (irq = 12; irq <= 31; irq++) { - set_irq_chip(irq, &sa1100_normal_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &sa1100_normal_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID); } for (irq = 32; irq <= 48; irq++) { - set_irq_chip(irq, &sa1100_high_gpio_chip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &sa1100_high_gpio_chip, + handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } /* * Install handler for GPIO 11-27 edge detect interrupts */ - set_irq_chip(IRQ_GPIO11_27, &sa1100_normal_chip); - set_irq_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler); + irq_set_chip(IRQ_GPIO11_27, &sa1100_normal_chip); + irq_set_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler); sa1100_init_gpio(); } diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 9d490c66891..f50b00bd18a 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -29,7 +29,7 @@ static unsigned long jornada_ssp_flags; /** * jornada_ssp_reverse - reverses input byte * - * we need to reverse all data we recieve from the mcu due to its physical location + * we need to reverse all data we receive from the mcu due to its physical location * returns : 01110111 -> 11101110 */ u8 inline jornada_ssp_reverse(u8 byte) @@ -179,7 +179,7 @@ static int __devinit jornada_ssp_probe(struct platform_device *dev) static int jornada_ssp_remove(struct platform_device *dev) { - /* Note that this doesnt actually remove the driver, since theres nothing to remove + /* Note that this doesn't actually remove the driver, since theres nothing to remove * It just makes sure everything is turned off */ GPSR = GPIO_GPIO25; ssp_exit(); diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 4aad01f7366..b4fa53a1427 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -145,8 +145,8 @@ static int __devinit neponset_probe(struct platform_device *dev) /* * Install handler for GPIO25. */ - set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING); - set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler); + irq_set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING); + irq_set_chained_handler(IRQ_GPIO25, neponset_irq_handler); /* * We would set IRQ_GPIO25 to be a wake-up IRQ, but @@ -161,9 +161,9 @@ static int __devinit neponset_probe(struct platform_device *dev) * Setup other Neponset IRQs. SA1111 will be done by the * generic SA1111 code. */ - set_irq_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq); + irq_set_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq); set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE); - set_irq_handler(IRQ_NEPONSET_USAR, handle_simple_irq); + irq_set_handler(IRQ_NEPONSET_USAR, handle_simple_irq); set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE); /* diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 42b80400c10..65161f2bea2 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -142,7 +142,7 @@ static void __init pleb_map_io(void) GPDR &= ~GPIO_ETH0_IRQ; - set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING); } MACHINE_START(PLEB, "PLEB") diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c index 831fc66dfa4..5dce13e429f 100644 --- a/arch/arm/mach-shark/irq.c +++ b/arch/arm/mach-shark/irq.c @@ -80,8 +80,7 @@ void __init shark_init_irq(void) int irq; for (irq = 0; irq < NR_IRQS; irq++) { - set_irq_chip(irq, &fb_chip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &fb_chip, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 1a8118c929b..1e35fa976d6 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -24,9 +24,9 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/mfd/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/mmc/host.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> @@ -312,7 +312,7 @@ static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0xe6850000, - .end = 0xe68501ff, + .end = 0xe68500ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -345,7 +345,7 @@ static struct resource sdhi1_resources[] = { [0] = { .name = "SDHI1", .start = 0xe6860000, - .end = 0xe68601ff, + .end = 0xe68600ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -923,7 +923,8 @@ static struct platform_device ceu_device = { .num_resources = ARRAY_SIZE(ceu_resources), .resource = ceu_resources, .dev = { - .platform_data = &sh_mobile_ceu_info, + .platform_data = &sh_mobile_ceu_info, + .coherent_dma_mask = 0xffffffff, }, }; @@ -946,7 +947,7 @@ static struct platform_device *ap4evb_devices[] __initdata = { &ap4evb_camera, }; -static int __init hdmi_init_pm_clock(void) +static void __init hdmi_init_pm_clock(void) { struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); int ret; @@ -987,20 +988,15 @@ static int __init hdmi_init_pm_clock(void) pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) { + if (ret < 0) pr_err("Cannot set HDMI parent: %d\n", ret); - goto out; - } out: if (!IS_ERR(hdmi_ick)) clk_put(hdmi_ick); - return ret; } -device_initcall(hdmi_init_pm_clock); - -static int __init fsi_init_pm_clock(void) +static void __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; @@ -1009,7 +1005,7 @@ static int __init fsi_init_pm_clock(void) if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); pr_err("Cannot get FSI ICK: %d\n", ret); - return ret; + return; } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); @@ -1017,10 +1013,7 @@ static int __init fsi_init_pm_clock(void) pr_err("Cannot set FSI-A parent: %d\n", ret); clk_put(fsia_ick); - - return ret; } -device_initcall(fsi_init_pm_clock); /* * FIXME !! @@ -1254,7 +1247,7 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_KEYIN4, NULL); /* enable TouchScreen */ - set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW); tsc_device.irq = IRQ28; i2c_register_board_info(1, &tsc_device, 1); @@ -1310,7 +1303,7 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].lcd_size_cfg.height = 91; /* enable TouchScreen */ - set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); tsc_device.irq = IRQ7; i2c_register_board_info(0, &tsc_device, 1); @@ -1347,6 +1340,9 @@ static void __init ap4evb_init(void) __raw_writel(srcr4 & ~(1 << 13), SRCR4); platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); + + hdmi_init_pm_clock(); + fsi_init_pm_clock(); } static void __init ap4evb_timer_init(void) diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index dee3e9231fb..c87a7b7c583 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -31,7 +31,7 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/mmc/host.h> -#include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/gpio.h> #include <mach/sh7377.h> #include <mach/common.h> @@ -205,7 +205,7 @@ static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0xe6d50000, - .end = 0xe6d501ff, + .end = 0xe6d50nff, .flags = IORESOURCE_MEM, }, [1] = { @@ -232,7 +232,7 @@ static struct resource sdhi1_resources[] = { [0] = { .name = "SDHI1", .start = 0xe6d60000, - .end = 0xe6d601ff, + .end = 0xe6d600ff, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 1a63c213e45..7da2ca24229 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -32,10 +32,10 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/leds.h> -#include <linux/mfd/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> @@ -295,6 +295,18 @@ static struct fb_videomode mackerel_lcdc_modes[] = { }, }; +static int mackerel_set_brightness(void *board_data, int brightness) +{ + gpio_set_value(GPIO_PORT31, brightness); + + return 0; +} + +static int mackerel_get_brightness(void *board_data) +{ + return gpio_get_value(GPIO_PORT31); +} + static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_BUS, .ch[0] = { @@ -307,6 +319,14 @@ static struct sh_mobile_lcdc_info lcdc_info = { .flags = 0, .lcd_size_cfg.width = 152, .lcd_size_cfg.height = 91, + .board_cfg = { + .set_brightness = mackerel_set_brightness, + .get_brightness = mackerel_get_brightness, + }, + .bl_info = { + .name = "sh_mobile_lcdc_bl", + .max_brightness = 1, + }, } }; @@ -403,7 +423,7 @@ static struct platform_device fsi_hdmi_device = { .name = "sh_fsi2_b_hdmi", }; -static int __init hdmi_init_pm_clock(void) +static void __init hdmi_init_pm_clock(void) { struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); int ret; @@ -447,17 +467,13 @@ static int __init hdmi_init_pm_clock(void) pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) { + if (ret < 0) pr_err("Cannot set HDMI parent: %d\n", ret); - goto out; - } out: if (!IS_ERR(hdmi_ick)) clk_put(hdmi_ick); - return ret; } -device_initcall(hdmi_init_pm_clock); /* USB1 (Host) */ static void usb1_host_port_power(int port, int power) @@ -670,7 +686,7 @@ static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0xe6850000, - .end = 0xe68501ff, + .end = 0xe68500ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -705,7 +721,7 @@ static struct resource sdhi1_resources[] = { [0] = { .name = "SDHI1", .start = 0xe6860000, - .end = 0xe68601ff, + .end = 0xe68600ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -748,7 +764,7 @@ static struct resource sdhi2_resources[] = { [0] = { .name = "SDHI2", .start = 0xe6870000, - .end = 0xe68701ff, + .end = 0xe68700ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -901,7 +917,8 @@ static struct platform_device ceu_device = { .num_resources = ARRAY_SIZE(ceu_resources), .resource = ceu_resources, .dev = { - .platform_data = &sh_mobile_ceu_info, + .platform_data = &sh_mobile_ceu_info, + .coherent_dma_mask = 0xffffffff, }, }; @@ -1059,7 +1076,7 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_LCDDCK, NULL); gpio_request(GPIO_PORT31, NULL); /* backlight */ - gpio_direction_output(GPIO_PORT31, 1); + gpio_direction_output(GPIO_PORT31, 0); /* off by default */ gpio_request(GPIO_PORT151, NULL); /* LCDDON */ gpio_direction_output(GPIO_PORT151, 1); @@ -1103,15 +1120,15 @@ static void __init mackerel_init(void) /* enable Keypad */ gpio_request(GPIO_FN_IRQ9_42, NULL); - set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH); + irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH); /* enable Touchscreen */ gpio_request(GPIO_FN_IRQ7_40, NULL); - set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); /* enable Accelerometer */ gpio_request(GPIO_FN_IRQ21, NULL); - set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH); + irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH); /* enable SDHI0 */ gpio_request(GPIO_FN_SDHICD0, NULL); @@ -1197,6 +1214,8 @@ static void __init mackerel_init(void) sh7372_add_standard_devices(); platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); + + hdmi_init_pm_clock(); } static void __init mackerel_timer_init(void) diff --git a/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h b/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h index a8d02be8d2b..db59fdbda86 100644 --- a/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h +++ b/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h @@ -1,5 +1,5 @@ -#ifndef MMCIF_AP4EB_H -#define MMCIF_AP4EB_H +#ifndef MMC_AP4EB_H +#define MMC_AP4EB_H #define PORT185CR (void __iomem *)0xe60520b9 #define PORT186CR (void __iomem *)0xe60520ba @@ -8,7 +8,7 @@ #define PORTR191_160DR (void __iomem *)0xe6056014 -static inline void mmcif_init_progress(void) +static inline void mmc_init_progress(void) { /* Initialise LEDS1-4 * registers: PORT185CR-PORT188CR (LED1-LED4 Control) @@ -20,10 +20,10 @@ static inline void mmcif_init_progress(void) __raw_writeb(0x10, PORT188CR); } -static inline void mmcif_update_progress(int n) +static inline void mmc_update_progress(int n) { __raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) | (1 << (25 + n)), PORTR191_160DR); } -#endif /* MMCIF_AP4EB_H */ +#endif /* MMC_AP4EB_H */ diff --git a/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h b/arch/arm/mach-shmobile/include/mach/mmc-mackerel.h index 4b4f6949a86..15d3a9efdec 100644 --- a/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h +++ b/arch/arm/mach-shmobile/include/mach/mmc-mackerel.h @@ -1,5 +1,5 @@ -#ifndef MMCIF_MACKEREL_H -#define MMCIF_MACKEREL_H +#ifndef MMC_MACKEREL_H +#define MMC_MACKEREL_H #define PORT0CR (void __iomem *)0xe6051000 #define PORT1CR (void __iomem *)0xe6051001 @@ -9,7 +9,7 @@ #define PORTR031_000DR (void __iomem *)0xe6055000 #define PORTL159_128DR (void __iomem *)0xe6054010 -static inline void mmcif_init_progress(void) +static inline void mmc_init_progress(void) { /* Initialise LEDS0-3 * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control) @@ -21,7 +21,7 @@ static inline void mmcif_init_progress(void) __raw_writeb(0x10, PORT159CR); } -static inline void mmcif_update_progress(int n) +static inline void mmc_update_progress(int n) { unsigned a = 0, b = 0; @@ -35,5 +35,4 @@ static inline void mmcif_update_progress(int n) __raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b, PORTL159_128DR); } - -#endif /* MMCIF_MACKEREL_H */ +#endif /* MMC_MACKEREL_H */ diff --git a/arch/arm/mach-shmobile/include/mach/mmcif.h b/arch/arm/mach-shmobile/include/mach/mmc.h index f4dc3279cf0..21a59db638b 100644 --- a/arch/arm/mach-shmobile/include/mach/mmcif.h +++ b/arch/arm/mach-shmobile/include/mach/mmc.h @@ -1,5 +1,5 @@ -#ifndef MMCIF_H -#define MMCIF_H +#ifndef MMC_H +#define MMC_H /************************************************** * @@ -8,11 +8,11 @@ **************************************************/ #ifdef CONFIG_MACH_AP4EVB -#include "mach/mmcif-ap4eb.h" -#elif CONFIG_MACH_MACKEREL -#include "mach/mmcif-mackerel.h" +#include "mach/mmc-ap4eb.h" +#elif defined(CONFIG_MACH_MACKEREL) +#include "mach/mmc-mackerel.h" #else #error "unsupported board." #endif -#endif /* MMCIF_H */ +#endif /* MMC_H */ diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h index 6d6a205bcf9..9320aff0a20 100644 --- a/arch/arm/mach-shmobile/include/mach/zboot.h +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -13,7 +13,7 @@ #ifdef CONFIG_MACH_AP4EVB #define MACH_TYPE MACH_TYPE_AP4EVB #include "mach/head-ap4evb.txt" -#elif CONFIG_MACH_MACKEREL +#elif defined(CONFIG_MACH_MACKEREL) #define MACH_TYPE MACH_TYPE_MACKEREL #include "mach/head-mackerel.txt" #else diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c index 2fe9704d5ea..cc442d198cd 100644 --- a/arch/arm/mach-shmobile/intc-sh7367.c +++ b/arch/arm/mach-shmobile/intc-sh7367.c @@ -421,7 +421,7 @@ static struct intc_desc intcs_desc __initdata = { static void intcs_demux(unsigned int irq, struct irq_desc *desc) { - void __iomem *reg = (void *)get_irq_data(irq); + void __iomem *reg = (void *)irq_get_handler_data(irq); unsigned int evtcodeas = ioread32(reg); generic_handle_irq(intcs_evt2irq(evtcodeas)); @@ -435,6 +435,6 @@ void __init sh7367_init_irq(void) register_intc_controller(&intcs_desc); /* demux using INTEVTSA */ - set_irq_data(evt2irq(0xf80), (void *)intevtsa); - set_irq_chained_handler(evt2irq(0xf80), intcs_demux); + irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa); + irq_set_chained_handler(evt2irq(0xf80), intcs_demux); } diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index ca5f9d17b39..7a4960f9c1e 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -601,7 +601,7 @@ static struct intc_desc intcs_desc __initdata = { static void intcs_demux(unsigned int irq, struct irq_desc *desc) { - void __iomem *reg = (void *)get_irq_data(irq); + void __iomem *reg = (void *)irq_get_handler_data(irq); unsigned int evtcodeas = ioread32(reg); generic_handle_irq(intcs_evt2irq(evtcodeas)); @@ -615,6 +615,6 @@ void __init sh7372_init_irq(void) register_intc_controller(&intcs_desc); /* demux using INTEVTSA */ - set_irq_data(evt2irq(0xf80), (void *)intevtsa); - set_irq_chained_handler(evt2irq(0xf80), intcs_demux); + irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa); + irq_set_chained_handler(evt2irq(0xf80), intcs_demux); } diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c index dd568382cc9..fe45154ce66 100644 --- a/arch/arm/mach-shmobile/intc-sh7377.c +++ b/arch/arm/mach-shmobile/intc-sh7377.c @@ -626,7 +626,7 @@ static struct intc_desc intcs_desc __initdata = { static void intcs_demux(unsigned int irq, struct irq_desc *desc) { - void __iomem *reg = (void *)get_irq_data(irq); + void __iomem *reg = (void *)irq_get_handler_data(irq); unsigned int evtcodeas = ioread32(reg); generic_handle_irq(intcs_evt2irq(evtcodeas)); @@ -641,6 +641,6 @@ void __init sh7377_init_irq(void) register_intc_controller(&intcs_desc); /* demux using INTEVTSA */ - set_irq_data(evt2irq(INTCS_INTVECT), (void *)intevtsa); - set_irq_chained_handler(evt2irq(INTCS_INTVECT), intcs_demux); + irq_set_handler_data(evt2irq(INTCS_INTVECT), (void *)intevtsa); + irq_set_chained_handler(evt2irq(INTCS_INTVECT), intcs_demux); } diff --git a/arch/arm/mach-shmobile/localtimer.c b/arch/arm/mach-shmobile/localtimer.c index 2111c28b724..ad9ccc9900c 100644 --- a/arch/arm/mach-shmobile/localtimer.c +++ b/arch/arm/mach-shmobile/localtimer.c @@ -18,8 +18,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = 29; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c index aa9231f4fc6..209fa5c65d4 100644 --- a/arch/arm/mach-tcc8k/irq.c +++ b/arch/arm/mach-tcc8k/irq.c @@ -102,10 +102,10 @@ void __init tcc8k_init_irq(void) for (irqno = 0; irqno < NR_IRQS; irqno++) { if (irqno < 32) - set_irq_chip(irqno, &tcc8000_irq_chip0); + irq_set_chip(irqno, &tcc8000_irq_chip0); else - set_irq_chip(irqno, &tcc8000_irq_chip1); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip(irqno, &tcc8000_irq_chip1); + irq_set_handler(irqno, handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } } diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 622a9ec1ff0..3cdeffc97b4 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -36,6 +36,11 @@ config MACH_KAEN help Support for the Kaen version of Seaboard +config MACH_PAZ00 + bool "Paz00 board" + help + Support for the Toshiba AC100/Dynabook AZ netbook + config MACH_SEABOARD bool "Seaboard board" help diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 9f7a7e1e0c3..1afe05038c2 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -22,6 +22,10 @@ obj-$(CONFIG_USB_SUPPORT) += usb_phy.o obj-${CONFIG_MACH_HARMONY} += board-harmony.o obj-${CONFIG_MACH_HARMONY} += board-harmony-pinmux.o obj-${CONFIG_MACH_HARMONY} += board-harmony-pcie.o +obj-${CONFIG_MACH_HARMONY} += board-harmony-power.o + +obj-${CONFIG_MACH_PAZ00} += board-paz00.o +obj-${CONFIG_MACH_PAZ00} += board-paz00-pinmux.o obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index f7e7d4514b6..9c27b95b8d8 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -27,13 +27,29 @@ #ifdef CONFIG_TEGRA_PCI +/* GPIO 3 of the PMIC */ +#define EN_VDD_1V05_GPIO (TEGRA_NR_GPIOS + 2) + static int __init harmony_pcie_init(void) { + struct regulator *regulator = NULL; int err; if (!machine_is_harmony()) return 0; + err = gpio_request(EN_VDD_1V05_GPIO, "EN_VDD_1V05"); + if (err) + return err; + + gpio_direction_output(EN_VDD_1V05_GPIO, 1); + + regulator = regulator_get(NULL, "pex_clk"); + if (IS_ERR_OR_NULL(regulator)) + goto err_reg; + + regulator_enable(regulator); + tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_NORMAL); tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_NORMAL); tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_NORMAL); @@ -49,9 +65,15 @@ err_pcie: tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_TRISTATE); tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_TRISTATE); + regulator_disable(regulator); + regulator_put(regulator); +err_reg: + gpio_free(EN_VDD_1V05_GPIO); + return err; } -subsys_initcall(harmony_pcie_init); +/* PCI should be initialized after I2C, mfd and regulators */ +subsys_initcall_sync(harmony_pcie_init); #endif diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c index 98368d947be..4d63e2e97a8 100644 --- a/arch/arm/mach-tegra/board-harmony-pinmux.c +++ b/arch/arm/mach-tegra/board-harmony-pinmux.c @@ -27,11 +27,11 @@ static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_OSC, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, @@ -114,13 +114,13 @@ static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPDI, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, @@ -141,12 +141,16 @@ static struct tegra_pingroup_config harmony_pinmux[] = { }; static struct tegra_gpio_table gpio_table[] = { - { .gpio = TEGRA_GPIO_PI5, .enable = true }, /* mmc2 cd */ - { .gpio = TEGRA_GPIO_PH1, .enable = true }, /* mmc2 wp */ - { .gpio = TEGRA_GPIO_PT3, .enable = true }, /* mmc2 pwr */ - { .gpio = TEGRA_GPIO_PH2, .enable = true }, /* mmc4 cd */ - { .gpio = TEGRA_GPIO_PH3, .enable = true }, /* mmc4 wp */ - { .gpio = TEGRA_GPIO_PI6, .enable = true }, /* mmc4 pwr */ + { .gpio = TEGRA_GPIO_SD2_CD, .enable = true }, + { .gpio = TEGRA_GPIO_SD2_WP, .enable = true }, + { .gpio = TEGRA_GPIO_SD2_POWER, .enable = true }, + { .gpio = TEGRA_GPIO_SD4_CD, .enable = true }, + { .gpio = TEGRA_GPIO_SD4_WP, .enable = true }, + { .gpio = TEGRA_GPIO_SD4_POWER, .enable = true }, + { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true }, + { .gpio = TEGRA_GPIO_HP_DET, .enable = true }, + { .gpio = TEGRA_GPIO_INT_MIC_EN, .enable = true }, + { .gpio = TEGRA_GPIO_EXT_MIC_EN, .enable = true }, }; void harmony_pinmux_init(void) diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c new file mode 100644 index 00000000000..c84442cabe0 --- /dev/null +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -0,0 +1,117 @@ +/* + * Copyright (C) 2010 NVIDIA, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307, USA + */ +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <linux/regulator/machine.h> +#include <linux/mfd/tps6586x.h> + +#include <mach/irqs.h> + +#define PMC_CTRL 0x0 +#define PMC_CTRL_INTR_LOW (1 << 17) + +static struct regulator_consumer_supply tps658621_ldo0_supply[] = { + REGULATOR_SUPPLY("pex_clk", NULL), +}; + +static struct regulator_init_data ldo0_data = { + .constraints = { + .min_uV = 1250 * 1000, + .max_uV = 3300 * 1000, + .valid_modes_mask = (REGULATOR_MODE_NORMAL | + REGULATOR_MODE_STANDBY), + .valid_ops_mask = (REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_VOLTAGE), + }, + .num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply), + .consumer_supplies = tps658621_ldo0_supply, +}; + +#define HARMONY_REGULATOR_INIT(_id, _minmv, _maxmv) \ + static struct regulator_init_data _id##_data = { \ + .constraints = { \ + .min_uV = (_minmv)*1000, \ + .max_uV = (_maxmv)*1000, \ + .valid_modes_mask = (REGULATOR_MODE_NORMAL | \ + REGULATOR_MODE_STANDBY), \ + .valid_ops_mask = (REGULATOR_CHANGE_MODE | \ + REGULATOR_CHANGE_STATUS | \ + REGULATOR_CHANGE_VOLTAGE), \ + }, \ + } + +HARMONY_REGULATOR_INIT(sm0, 725, 1500); +HARMONY_REGULATOR_INIT(sm1, 725, 1500); +HARMONY_REGULATOR_INIT(sm2, 3000, 4550); +HARMONY_REGULATOR_INIT(ldo1, 725, 1500); +HARMONY_REGULATOR_INIT(ldo2, 725, 1500); +HARMONY_REGULATOR_INIT(ldo3, 1250, 3300); +HARMONY_REGULATOR_INIT(ldo4, 1700, 2475); +HARMONY_REGULATOR_INIT(ldo5, 1250, 3300); +HARMONY_REGULATOR_INIT(ldo6, 1250, 3300); +HARMONY_REGULATOR_INIT(ldo7, 1250, 3300); +HARMONY_REGULATOR_INIT(ldo8, 1250, 3300); +HARMONY_REGULATOR_INIT(ldo9, 1250, 3300); + +#define TPS_REG(_id, _data) \ + { \ + .id = TPS6586X_ID_##_id, \ + .name = "tps6586x-regulator", \ + .platform_data = _data, \ + } + +static struct tps6586x_subdev_info tps_devs[] = { + TPS_REG(SM_0, &sm0_data), + TPS_REG(SM_1, &sm1_data), + TPS_REG(SM_2, &sm2_data), + TPS_REG(LDO_0, &ldo0_data), + TPS_REG(LDO_1, &ldo1_data), + TPS_REG(LDO_2, &ldo2_data), + TPS_REG(LDO_3, &ldo3_data), + TPS_REG(LDO_4, &ldo4_data), + TPS_REG(LDO_5, &ldo5_data), + TPS_REG(LDO_6, &ldo6_data), + TPS_REG(LDO_7, &ldo7_data), + TPS_REG(LDO_8, &ldo8_data), + TPS_REG(LDO_9, &ldo9_data), +}; + +static struct tps6586x_platform_data tps_platform = { + .irq_base = TEGRA_NR_IRQS, + .num_subdevs = ARRAY_SIZE(tps_devs), + .subdevs = tps_devs, + .gpio_base = TEGRA_NR_GPIOS, +}; + +static struct i2c_board_info __initdata harmony_regulators[] = { + { + I2C_BOARD_INFO("tps6586x", 0x34), + .irq = INT_EXTERNAL_PMU, + .platform_data = &tps_platform, + }, +}; + +int __init harmony_regulator_init(void) +{ + i2c_register_board_info(3, harmony_regulators, 1); + + return 0; +} diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index 49224e936eb..75c918a86a3 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -2,6 +2,7 @@ * arch/arm/mach-tegra/board-harmony.c * * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2011 NVIDIA, Inc. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -22,12 +23,18 @@ #include <linux/dma-mapping.h> #include <linux/pda_power.h> #include <linux/io.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/i2c-tegra.h> + +#include <sound/wm8903.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/setup.h> +#include <mach/harmony_audio.h> #include <mach/iomap.h> #include <mach/irqs.h> #include <mach/sdhci.h> @@ -60,11 +67,81 @@ static struct platform_device debug_uart = { }, }; +static struct harmony_audio_platform_data harmony_audio_pdata = { + .gpio_spkr_en = TEGRA_GPIO_SPKR_EN, + .gpio_hp_det = TEGRA_GPIO_HP_DET, + .gpio_int_mic_en = TEGRA_GPIO_INT_MIC_EN, + .gpio_ext_mic_en = TEGRA_GPIO_EXT_MIC_EN, +}; + +static struct platform_device harmony_audio_device = { + .name = "tegra-snd-harmony", + .id = 0, + .dev = { + .platform_data = &harmony_audio_pdata, + }, +}; + +static struct tegra_i2c_platform_data harmony_i2c1_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data harmony_i2c2_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data harmony_i2c3_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data harmony_dvc_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct wm8903_platform_data harmony_wm8903_pdata = { + .irq_active_low = 0, + .micdet_cfg = 0, + .micdet_delay = 100, + .gpio_base = HARMONY_GPIO_WM8903(0), + .gpio_cfg = { + WM8903_GPIO_NO_CONFIG, + WM8903_GPIO_NO_CONFIG, + 0, + WM8903_GPIO_NO_CONFIG, + WM8903_GPIO_NO_CONFIG, + }, +}; + +static struct i2c_board_info __initdata wm8903_board_info = { + I2C_BOARD_INFO("wm8903", 0x1a), + .platform_data = &harmony_wm8903_pdata, + .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ), +}; + +static void __init harmony_i2c_init(void) +{ + tegra_i2c_device1.dev.platform_data = &harmony_i2c1_platform_data; + tegra_i2c_device2.dev.platform_data = &harmony_i2c2_platform_data; + tegra_i2c_device3.dev.platform_data = &harmony_i2c3_platform_data; + tegra_i2c_device4.dev.platform_data = &harmony_dvc_platform_data; + + platform_device_register(&tegra_i2c_device1); + platform_device_register(&tegra_i2c_device2); + platform_device_register(&tegra_i2c_device3); + platform_device_register(&tegra_i2c_device4); + + i2c_register_board_info(0, &wm8903_board_info, 1); +} + static struct platform_device *harmony_devices[] __initdata = { &debug_uart, &tegra_sdhci_device1, &tegra_sdhci_device2, &tegra_sdhci_device4, + &tegra_i2s_device1, + &tegra_das_device, + &tegra_pcm_device, + &harmony_audio_device, }; static void __init tegra_harmony_fixup(struct machine_desc *desc, @@ -80,6 +157,10 @@ static void __init tegra_harmony_fixup(struct machine_desc *desc, static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = { /* name parent rate enabled */ { "uartd", "pll_p", 216000000, true }, + { "pll_a", "pll_p_out1", 56448000, true }, + { "pll_a_out0", "pll_a", 11289600, true }, + { "cdev1", NULL, 0, true }, + { "i2s1", "pll_a_out0", 11289600, false}, { NULL, NULL, 0, 0}, }; @@ -91,15 +172,15 @@ static struct tegra_sdhci_platform_data sdhci_pdata1 = { }; static struct tegra_sdhci_platform_data sdhci_pdata2 = { - .cd_gpio = TEGRA_GPIO_PI5, - .wp_gpio = TEGRA_GPIO_PH1, - .power_gpio = TEGRA_GPIO_PT3, + .cd_gpio = TEGRA_GPIO_SD2_CD, + .wp_gpio = TEGRA_GPIO_SD2_WP, + .power_gpio = TEGRA_GPIO_SD2_POWER, }; static struct tegra_sdhci_platform_data sdhci_pdata4 = { - .cd_gpio = TEGRA_GPIO_PH2, - .wp_gpio = TEGRA_GPIO_PH3, - .power_gpio = TEGRA_GPIO_PI6, + .cd_gpio = TEGRA_GPIO_SD4_CD, + .wp_gpio = TEGRA_GPIO_SD4_WP, + .power_gpio = TEGRA_GPIO_SD4_POWER, .is_8bit = 1, }; @@ -114,6 +195,8 @@ static void __init tegra_harmony_init(void) tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices)); + harmony_i2c_init(); + harmony_regulator_init(); } MACHINE_START(HARMONY, "harmony") diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h index 09ca7755dd5..1e57b071f52 100644 --- a/arch/arm/mach-tegra/board-harmony.h +++ b/arch/arm/mach-tegra/board-harmony.h @@ -17,6 +17,21 @@ #ifndef _MACH_TEGRA_BOARD_HARMONY_H #define _MACH_TEGRA_BOARD_HARMONY_H +#define HARMONY_GPIO_WM8903(_x_) (TEGRA_NR_GPIOS + (_x_)) + +#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 +#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 +#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PT3 +#define TEGRA_GPIO_SD4_CD TEGRA_GPIO_PH2 +#define TEGRA_GPIO_SD4_WP TEGRA_GPIO_PH3 +#define TEGRA_GPIO_SD4_POWER TEGRA_GPIO_PI6 +#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3 +#define TEGRA_GPIO_SPKR_EN HARMONY_GPIO_WM8903(2) +#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2 +#define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0 +#define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1 + void harmony_pinmux_init(void); +int harmony_regulator_init(void); #endif diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c new file mode 100644 index 00000000000..2643d1bd568 --- /dev/null +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c @@ -0,0 +1,157 @@ +/* + * arch/arm/mach-tegra/board-paz00-pinmux.c + * + * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <mach/pinmux.h> + +#include "gpio-names.h" +#include "board-paz00.h" + +static struct tegra_pingroup_config paz00_pinmux[] = { + {TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_ATB, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_ATC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CSUS, TEGRA_MUX_PLLC_OUT1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DAP2, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DDC, TEGRA_MUX_I2C2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTA, TEGRA_MUX_RSVD1, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTB, TEGRA_MUX_RSVD1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTC, TEGRA_MUX_RSVD1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTD, TEGRA_MUX_RSVD1, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTE, TEGRA_MUX_RSVD1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTF, TEGRA_MUX_I2C3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMA, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GME, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GPU, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GPU7, TEGRA_MUX_RTCK, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GPV, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_I2CP, TEGRA_MUX_I2C, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_IRRX, TEGRA_MUX_UARTA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_IRTX, TEGRA_MUX_UARTA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCA, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCB, TEGRA_MUX_SDIO2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCC, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCD, TEGRA_MUX_SDIO2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCE, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCF, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LCSN, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LD0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD10, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD11, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD12, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD13, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD14, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD15, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD16, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD17, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD2, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD3, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD4, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD5, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD6, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD7, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD8, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD9, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LDC, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LDI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LHP0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LHP1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LHP2, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LHS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LM0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LM1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LPP, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LPW0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LPW1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LPW2, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSC0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LSC1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSCK, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSDA, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSDI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSPI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LVP0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LVP1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LVS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_OWC, TEGRA_MUX_OWR, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_PMC, TEGRA_MUX_PWR_ON, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PTA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_RM, TEGRA_MUX_I2C, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SDB, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SDC, TEGRA_MUX_TWC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SDD, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SLXA, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SPI4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXD, TEGRA_MUX_SPI4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPDI, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPID, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIE, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIF, TEGRA_MUX_RSVD4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_UAD, TEGRA_MUX_SPDIF, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UCA, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UCB, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UDA, TEGRA_MUX_ULPI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_CK32, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DDRC, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCA, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCB, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCC, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCD, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCE, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_XM2C, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, +}; + +static struct tegra_gpio_table gpio_table[] = { + { .gpio = TEGRA_GPIO_SD1_CD, .enable = true }, + { .gpio = TEGRA_GPIO_SD1_WP, .enable = true }, + { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true }, + { .gpio = TEGRA_GPIO_SD4_CD, .enable = true }, + { .gpio = TEGRA_GPIO_SD4_WP, .enable = true }, + { .gpio = TEGRA_GPIO_SD4_POWER, .enable = true }, +}; + +void paz00_pinmux_init(void) +{ + tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux)); + + tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); +} diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c new file mode 100644 index 00000000000..57e50a823ee --- /dev/null +++ b/arch/arm/mach-tegra/board-paz00.c @@ -0,0 +1,128 @@ +/* + * arch/arm/mach-tegra/board-paz00.c + * + * Copyright (C) 2011 Marc Dietrich <marvin24@gmx.de> + * + * Based on board-harmony.c + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/pda_power.h> +#include <linux/io.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/setup.h> + +#include <mach/iomap.h> +#include <mach/irqs.h> +#include <mach/sdhci.h> + +#include "board.h" +#include "board-paz00.h" +#include "clock.h" +#include "devices.h" +#include "gpio-names.h" + +static struct plat_serial8250_port debug_uart_platform_data[] = { + { + .membase = IO_ADDRESS(TEGRA_UARTD_BASE), + .mapbase = TEGRA_UARTD_BASE, + .irq = INT_UARTD, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 216000000, + }, { + .flags = 0 + } +}; + +static struct platform_device debug_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = debug_uart_platform_data, + }, +}; + +static struct platform_device *paz00_devices[] __initdata = { + &debug_uart, + &tegra_sdhci_device1, + &tegra_sdhci_device2, + &tegra_sdhci_device4, +}; + +static void __init tegra_paz00_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + mi->nr_banks = 1; + mi->bank[0].start = PHYS_OFFSET; + mi->bank[0].size = 448 * SZ_1M; +} + +static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { + /* name parent rate enabled */ + { "uartd", "pll_p", 216000000, true }, + { NULL, NULL, 0, 0}, +}; + + +static struct tegra_sdhci_platform_data sdhci_pdata1 = { + .cd_gpio = TEGRA_GPIO_SD1_CD, + .wp_gpio = TEGRA_GPIO_SD1_WP, + .power_gpio = TEGRA_GPIO_SD1_POWER, +}; + +static struct tegra_sdhci_platform_data sdhci_pdata2 = { + .cd_gpio = -1, + .wp_gpio = -1, + .power_gpio = -1, +}; + +static struct tegra_sdhci_platform_data sdhci_pdata4 = { + .cd_gpio = TEGRA_GPIO_SD4_CD, + .wp_gpio = TEGRA_GPIO_SD4_WP, + .power_gpio = TEGRA_GPIO_SD4_POWER, + .is_8bit = 1, +}; + +static void __init tegra_paz00_init(void) +{ + tegra_clk_init_from_table(paz00_clk_init_table); + + paz00_pinmux_init(); + + tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; + tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2; + tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; + + platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices)); +} + +MACHINE_START(PAZ00, "paz00") + .boot_params = 0x00000100, + .fixup = tegra_paz00_fixup, + .map_io = tegra_map_common_io, + .init_early = tegra_init_early, + .init_irq = tegra_init_irq, + .timer = &tegra_timer, + .init_machine = tegra_paz00_init, +MACHINE_END diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h new file mode 100644 index 00000000000..da193ca76d3 --- /dev/null +++ b/arch/arm/mach-tegra/board-paz00.h @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-tegra/board-paz00.h + * + * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _MACH_TEGRA_BOARD_PAZ00_H +#define _MACH_TEGRA_BOARD_PAZ00_H + +#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 +#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 +#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 +#define TEGRA_GPIO_SD4_CD TEGRA_GPIO_PH2 +#define TEGRA_GPIO_SD4_WP TEGRA_GPIO_PH3 +#define TEGRA_GPIO_SD4_POWER TEGRA_GPIO_PI6 + +void paz00_pinmux_init(void); + +#endif diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c index 2d6ad83ed4b..0bda495e974 100644 --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c @@ -161,11 +161,12 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { static struct tegra_gpio_table gpio_table[] = { - { .gpio = TEGRA_GPIO_PI5, .enable = true }, /* mmc2 cd */ - { .gpio = TEGRA_GPIO_PH1, .enable = true }, /* mmc2 wp */ - { .gpio = TEGRA_GPIO_PI6, .enable = true }, /* mmc2 pwr */ - { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true }, /* lid switch */ - { .gpio = TEGRA_GPIO_POWERKEY, .enable = true }, /* power key */ + { .gpio = TEGRA_GPIO_SD2_CD, .enable = true }, + { .gpio = TEGRA_GPIO_SD2_WP, .enable = true }, + { .gpio = TEGRA_GPIO_SD2_POWER, .enable = true }, + { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true }, + { .gpio = TEGRA_GPIO_POWERKEY, .enable = true }, + { .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true }, }; void __init seaboard_pinmux_init(void) diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index 6ca9e61f6cd..a8d7ace9f95 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -18,9 +18,12 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> +#include <linux/i2c.h> +#include <linux/i2c-tegra.h> #include <linux/delay.h> #include <linux/input.h> #include <linux/io.h> +#include <linux/gpio.h> #include <linux/gpio_keys.h> #include <mach/iomap.h> @@ -63,6 +66,22 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = { { NULL, NULL, 0, 0}, }; +static struct tegra_i2c_platform_data seaboard_i2c1_platform_data = { + .bus_clk_rate = 400000. +}; + +static struct tegra_i2c_platform_data seaboard_i2c2_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data seaboard_i2c3_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data seaboard_dvc_platform_data = { + .bus_clk_rate = 400000, +}; + static struct gpio_keys_button seaboard_gpio_keys_buttons[] = { { .code = SW_LID, @@ -103,9 +122,9 @@ static struct tegra_sdhci_platform_data sdhci_pdata1 = { }; static struct tegra_sdhci_platform_data sdhci_pdata3 = { - .cd_gpio = TEGRA_GPIO_PI5, - .wp_gpio = TEGRA_GPIO_PH1, - .power_gpio = TEGRA_GPIO_PI6, + .cd_gpio = TEGRA_GPIO_SD2_CD, + .wp_gpio = TEGRA_GPIO_SD2_WP, + .power_gpio = TEGRA_GPIO_SD2_POWER, }; static struct tegra_sdhci_platform_data sdhci_pdata4 = { @@ -124,7 +143,36 @@ static struct platform_device *seaboard_devices[] __initdata = { &seaboard_gpio_keys_device, }; -static void __init __tegra_seaboard_init(void) +static struct i2c_board_info __initdata isl29018_device = { + I2C_BOARD_INFO("isl29018", 0x44), + .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_ISL29018_IRQ), +}; + +static struct i2c_board_info __initdata adt7461_device = { + I2C_BOARD_INFO("adt7461", 0x4c), +}; + +static void __init seaboard_i2c_init(void) +{ + gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018"); + gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ); + + i2c_register_board_info(0, &isl29018_device, 1); + + i2c_register_board_info(4, &adt7461_device, 1); + + tegra_i2c_device1.dev.platform_data = &seaboard_i2c1_platform_data; + tegra_i2c_device2.dev.platform_data = &seaboard_i2c2_platform_data; + tegra_i2c_device3.dev.platform_data = &seaboard_i2c3_platform_data; + tegra_i2c_device4.dev.platform_data = &seaboard_dvc_platform_data; + + platform_device_register(&tegra_i2c_device1); + platform_device_register(&tegra_i2c_device2); + platform_device_register(&tegra_i2c_device3); + platform_device_register(&tegra_i2c_device4); +} + +static void __init seaboard_common_init(void) { seaboard_pinmux_init(); @@ -144,7 +192,9 @@ static void __init tegra_seaboard_init(void) debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE; debug_uart_platform_data[0].irq = INT_UARTD; - __tegra_seaboard_init(); + seaboard_common_init(); + + seaboard_i2c_init(); } static void __init tegra_kaen_init(void) @@ -154,7 +204,9 @@ static void __init tegra_kaen_init(void) debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; debug_uart_platform_data[0].irq = INT_UARTB; - __tegra_seaboard_init(); + seaboard_common_init(); + + seaboard_i2c_init(); } static void __init tegra_wario_init(void) @@ -164,7 +216,9 @@ static void __init tegra_wario_init(void) debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; debug_uart_platform_data[0].irq = INT_UARTB; - __tegra_seaboard_init(); + seaboard_common_init(); + + seaboard_i2c_init(); } diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h index a098e359973..d8415e1a843 100644 --- a/arch/arm/mach-tegra/board-seaboard.h +++ b/arch/arm/mach-tegra/board-seaboard.h @@ -17,6 +17,9 @@ #ifndef _MACH_TEGRA_BOARD_SEABOARD_H #define _MACH_TEGRA_BOARD_SEABOARD_H +#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 +#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 +#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6 #define TEGRA_GPIO_LIDSWITCH TEGRA_GPIO_PC7 #define TEGRA_GPIO_USB1 TEGRA_GPIO_PD0 #define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PV2 diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c index 6d4fc9f7f1f..13534fa08ab 100644 --- a/arch/arm/mach-tegra/board-trimslice-pinmux.c +++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c @@ -16,8 +16,11 @@ #include <linux/kernel.h> #include <linux/init.h> + #include <mach/pinmux.h> +#include <mach/gpio.h> +#include "gpio-names.h" #include "board-trimslice.h" static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { @@ -139,7 +142,13 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; +static struct tegra_gpio_table gpio_table[] = { + { .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */ + { .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */ +}; + void __init trimslice_pinmux_init(void) { tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux)); + tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); } diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index 7be7d4acd02..cda4cfd78e8 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -29,9 +29,12 @@ #include <asm/setup.h> #include <mach/iomap.h> +#include <mach/sdhci.h> #include "board.h" #include "clock.h" +#include "devices.h" +#include "gpio-names.h" #include "board-trimslice.h" @@ -56,9 +59,22 @@ static struct platform_device debug_uart = { .platform_data = debug_uart_platform_data, }, }; +static struct tegra_sdhci_platform_data sdhci_pdata1 = { + .cd_gpio = -1, + .wp_gpio = -1, + .power_gpio = -1, +}; + +static struct tegra_sdhci_platform_data sdhci_pdata4 = { + .cd_gpio = TRIMSLICE_GPIO_SD4_CD, + .wp_gpio = TRIMSLICE_GPIO_SD4_WP, + .power_gpio = -1, +}; static struct platform_device *trimslice_devices[] __initdata = { &debug_uart, + &tegra_sdhci_device1, + &tegra_sdhci_device4, }; static void __init tegra_trimslice_fixup(struct machine_desc *desc, @@ -92,6 +108,9 @@ static void __init tegra_trimslice_init(void) trimslice_pinmux_init(); + tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; + tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; + platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices)); } diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h index 16ec0f0d3bb..e8ef6291c6f 100644 --- a/arch/arm/mach-tegra/board-trimslice.h +++ b/arch/arm/mach-tegra/board-trimslice.h @@ -17,6 +17,9 @@ #ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H #define _MACH_TEGRA_BOARD_TRIMSLICE_H +#define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */ +#define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */ + void trimslice_pinmux_init(void); #endif diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c index 682e6d33108..1528f9daef1 100644 --- a/arch/arm/mach-tegra/devices.c +++ b/arch/arm/mach-tegra/devices.c @@ -503,3 +503,73 @@ struct platform_device tegra_uarte_device = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; + +static struct resource i2s_resource1[] = { + [0] = { + .start = INT_I2S1, + .end = INT_I2S1, + .flags = IORESOURCE_IRQ + }, + [1] = { + .start = TEGRA_DMA_REQ_SEL_I2S_1, + .end = TEGRA_DMA_REQ_SEL_I2S_1, + .flags = IORESOURCE_DMA + }, + [2] = { + .start = TEGRA_I2S1_BASE, + .end = TEGRA_I2S1_BASE + TEGRA_I2S1_SIZE - 1, + .flags = IORESOURCE_MEM + } +}; + +static struct resource i2s_resource2[] = { + [0] = { + .start = INT_I2S2, + .end = INT_I2S2, + .flags = IORESOURCE_IRQ + }, + [1] = { + .start = TEGRA_DMA_REQ_SEL_I2S2_1, + .end = TEGRA_DMA_REQ_SEL_I2S2_1, + .flags = IORESOURCE_DMA + }, + [2] = { + .start = TEGRA_I2S2_BASE, + .end = TEGRA_I2S2_BASE + TEGRA_I2S2_SIZE - 1, + .flags = IORESOURCE_MEM + } +}; + +struct platform_device tegra_i2s_device1 = { + .name = "tegra-i2s", + .id = 0, + .resource = i2s_resource1, + .num_resources = ARRAY_SIZE(i2s_resource1), +}; + +struct platform_device tegra_i2s_device2 = { + .name = "tegra-i2s", + .id = 1, + .resource = i2s_resource2, + .num_resources = ARRAY_SIZE(i2s_resource2), +}; + +static struct resource tegra_das_resources[] = { + [0] = { + .start = TEGRA_APB_MISC_DAS_BASE, + .end = TEGRA_APB_MISC_DAS_BASE + TEGRA_APB_MISC_DAS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device tegra_das_device = { + .name = "tegra-das", + .id = -1, + .num_resources = ARRAY_SIZE(tegra_das_resources), + .resource = tegra_das_resources, +}; + +struct platform_device tegra_pcm_device = { + .name = "tegra-pcm-audio", + .id = -1, +}; diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h index 888810c37ee..4a7dc0a097d 100644 --- a/arch/arm/mach-tegra/devices.h +++ b/arch/arm/mach-tegra/devices.h @@ -42,5 +42,9 @@ extern struct platform_device tegra_uartc_device; extern struct platform_device tegra_uartd_device; extern struct platform_device tegra_uarte_device; extern struct platform_device tegra_pmu_device; +extern struct platform_device tegra_i2s_device1; +extern struct platform_device tegra_i2s_device2; +extern struct platform_device tegra_das_device; +extern struct platform_device tegra_pcm_device; #endif diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index e945ae28ee7..f4ef5eb317b 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -223,7 +223,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, * - Change the source selector to invalid to stop the DMA from * FIFO to memory. * - Read the status register to know the number of pending - * bytes to be transfered. + * bytes to be transferred. * - Finally stop or program the DMA to the next buffer in the * list. */ @@ -244,7 +244,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, if (status & STA_BUSY) req->bytes_transferred -= to_transfer; - /* In continous transfer mode, DMA only tracks the count of the + /* In continuous transfer mode, DMA only tracks the count of the * half DMA buffer. So, if the DMA already finished half the DMA * then add the half buffer to the completed count. * diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c index 12090a2cf3e..65a1aba6823 100644 --- a/arch/arm/mach-tegra/gpio.c +++ b/arch/arm/mach-tegra/gpio.c @@ -208,9 +208,9 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) spin_unlock_irqrestore(&bank->lvl_lock[port], flags); if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __set_irq_handler_unlocked(d->irq, handle_level_irq); + __irq_set_handler_locked(d->irq, handle_level_irq); else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __set_irq_handler_unlocked(d->irq, handle_edge_irq); + __irq_set_handler_locked(d->irq, handle_edge_irq); return 0; } @@ -224,7 +224,7 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) desc->irq_data.chip->irq_ack(&desc->irq_data); - bank = get_irq_data(irq); + bank = irq_get_handler_data(irq); for (port = 0; port < 4; port++) { int gpio = tegra_gpio_compose(bank->bank, port, 0); @@ -257,7 +257,8 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) void tegra_gpio_resume(void) { unsigned long flags; - int b, p, i; + int b; + int p; local_irq_save(flags); @@ -275,31 +276,13 @@ void tegra_gpio_resume(void) } local_irq_restore(flags); - - for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { - struct irq_desc *desc = irq_to_desc(i); - if (!desc || (desc->status & IRQ_WAKEUP)) - continue; - enable_irq(i); - } } void tegra_gpio_suspend(void) { unsigned long flags; - int b, p, i; - - for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { - struct irq_desc *desc = irq_to_desc(i); - if (!desc) - continue; - if (desc->status & IRQ_WAKEUP) { - int gpio = i - INT_GPIO_BASE; - pr_debug("gpio %d.%d is wakeup\n", gpio/8, gpio&7); - continue; - } - disable_irq(i); - } + int b; + int p; local_irq_save(flags); for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { @@ -320,7 +303,7 @@ void tegra_gpio_suspend(void) static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable) { struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); - return set_irq_wake(bank->irq, enable); + return irq_set_irq_wake(bank->irq, enable); } #endif @@ -359,18 +342,18 @@ static int __init tegra_gpio_init(void) for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))]; - lockdep_set_class(&irq_desc[i].lock, &gpio_lock_class); - set_irq_chip_data(i, bank); - set_irq_chip(i, &tegra_gpio_irq_chip); - set_irq_handler(i, handle_simple_irq); + irq_set_lockdep_class(i, &gpio_lock_class); + irq_set_chip_data(i, bank); + irq_set_chip_and_handler(i, &tegra_gpio_irq_chip, + handle_simple_irq); set_irq_flags(i, IRQF_VALID); } for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { bank = &tegra_gpio_banks[i]; - set_irq_chained_handler(bank->irq, tegra_gpio_irq_handler); - set_irq_data(bank->irq, bank); + irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler); + irq_set_handler_data(bank->irq, bank); for (j = 0; j < 4; j++) spin_lock_init(&bank->lvl_lock[j]); diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h index cc115174899..425b42e91ef 100644 --- a/arch/arm/mach-tegra/include/mach/barriers.h +++ b/arch/arm/mach-tegra/include/mach/barriers.h @@ -23,7 +23,7 @@ #include <asm/outercache.h> -#define rmb() dmb() +#define rmb() dsb() #define wmb() do { dsb(); outer_sync(); } while (0) #define mb() wmb() diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index 39011bd9a92..d0132e8031a 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -92,11 +92,11 @@ struct tegra_dma_req { /* This is a called from the DMA ISR context when the DMA is still in * progress and is actively filling same buffer. * - * In case of continous mode receive, this threshold is 1/2 the buffer + * In case of continuous mode receive, this threshold is 1/2 the buffer * size. In other cases, this will not even be called as there is no * hardware support for it. * - * In the case of continous mode receive, if there is next req already + * In the case of continuous mode receive, if there is next req already * queued, DMA programs the HW to use that req when this req is * completed. If there is no "next req" queued, then DMA ISR doesn't do * anything before calling this callback. diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h index 691cdabd69c..19dec3ac085 100644 --- a/arch/arm/mach-tegra/include/mach/iomap.h +++ b/arch/arm/mach-tegra/include/mach/iomap.h @@ -122,6 +122,9 @@ #define TEGRA_APB_MISC_BASE 0x70000000 #define TEGRA_APB_MISC_SIZE SZ_4K +#define TEGRA_APB_MISC_DAS_BASE 0x70000c00 +#define TEGRA_APB_MISC_DAS_SIZE SZ_128 + #define TEGRA_AC97_BASE 0x70002000 #define TEGRA_AC97_SIZE SZ_512 diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index dfbc219ea49..4330d8995b2 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -144,7 +144,7 @@ void __init tegra_init_irq(void) gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); - gic = get_irq_chip(29); + gic = irq_get_chip(29); tegra_gic_unmask_irq = gic->irq_unmask; tegra_gic_mask_irq = gic->irq_mask; tegra_gic_ack_irq = gic->irq_ack; @@ -154,8 +154,7 @@ void __init tegra_init_irq(void) for (i = 0; i < INT_MAIN_NR; i++) { irq = INT_PRI_BASE + i; - set_irq_chip(irq, &tegra_irq); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &tegra_irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } } diff --git a/arch/arm/mach-tegra/localtimer.c b/arch/arm/mach-tegra/localtimer.c index f81ca7cbbc1..e91d681d45a 100644 --- a/arch/arm/mach-tegra/localtimer.c +++ b/arch/arm/mach-tegra/localtimer.c @@ -18,8 +18,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 6d7c4eea4dc..4459470c052 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -1362,14 +1362,15 @@ static int tegra_clk_shared_bus_set_rate(struct clk *c, unsigned long rate) { unsigned long flags; int ret; + long new_rate = rate; - rate = clk_round_rate(c->parent, rate); - if (rate < 0) - return rate; + new_rate = clk_round_rate(c->parent, new_rate); + if (new_rate < 0) + return new_rate; spin_lock_irqsave(&c->parent->spinlock, flags); - c->u.shared_bus_user.rate = rate; + c->u.shared_bus_user.rate = new_rate; ret = tegra_clk_shared_bus_update(c->parent); spin_unlock_irqrestore(&c->parent->spinlock, flags); diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index fabcc49abe8..5535dd0a78c 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -263,7 +263,7 @@ static void disable_i2s0_vcxo(void) val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ + /* Deactivate VCXO if no one else is using VCXO */ if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); @@ -283,7 +283,7 @@ static void disable_i2s1_vcxo(void) val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ + /* Deactivate VCXO if no one else is using VCXO */ if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); @@ -649,7 +649,7 @@ static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) */ long clk_round_rate(struct clk *clk, unsigned long rate) { - /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */ + /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */ /* Else default to fixed value */ if (clk->round_rate) { diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 203b986280f..58626013aa3 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -23,6 +23,7 @@ menu "Ux500 target platform" config MACH_U8500 bool "U8500 Development platform" depends on UX500_SOC_DB8500 + select TPS6105X help Include support for the mop500 development platform. diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 875c91b2f8a..9ed0f90cfe2 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -13,6 +13,30 @@ #include <linux/regulator/ab8500.h> #include "board-mop500-regulators.h" +/* + * TPS61052 regulator + */ +static struct regulator_consumer_supply tps61052_vaudio_consumers[] = { + /* + * Boost converter supply to raise voltage on audio speaker, this + * is actually connected to three pins, VInVhfL (left amplifier) + * VInVhfR (right amplifier) and VIntDClassInt - all three must + * be connected to the same voltage. + */ + REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"), +}; + +struct regulator_init_data tps61052_regulator = { + .constraints = { + .name = "vaudio-hf", + .min_uV = 4500000, + .max_uV = 4500000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers), + .consumer_supplies = tps61052_vaudio_consumers, +}; + static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { /* External displays, connector on board 2v5 power supply */ REGULATOR_SUPPLY("vaux12v5", "mcde.0"), @@ -62,6 +86,182 @@ static struct regulator_consumer_supply ab8500_vana_consumers[] = { REGULATOR_SUPPLY("vsmps2", "mcde.0"), }; +/* ab8500 regulator register initialization */ +struct ab8500_regulator_reg_init +ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { + /* + * VanaRequestCtrl = HP/LP depending on VxRequest + * VextSupply1RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), + /* + * VextSupply2RequestCtrl = HP/LP depending on VxRequest + * VextSupply3RequestCtrl = HP/LP depending on VxRequest + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), + /* + * VanaSysClkReq1HPValid = disabled + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00), + /* + * VextSupply1SysClkReq1HPValid = disabled + * VextSupply2SysClkReq1HPValid = disabled + * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40), + /* + * VanaHwHPReq1Valid = disabled + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00), + /* + * VextSupply1HwHPReq1Valid = disabled + * VextSupply2HwHPReq1Valid = disabled + * VextSupply3HwHPReq1Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00), + /* + * VanaHwHPReq2Valid = disabled + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00), + /* + * VextSupply1HwHPReq2Valid = disabled + * VextSupply2HwHPReq2Valid = disabled + * VextSupply3HwHPReq2Valid = HWReq2 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04), + /* + * VanaSwHPReqValid = disabled + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VextSupply1SwHPReqValid = disabled + * VextSupply2SwHPReqValid = disabled + * VextSupply3SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + * SysClkReq5Valid1 = disabled + * SysClkReq6Valid1 = SysClkReq6 controlled + * SysClkReq7Valid1 = disabled + * SysClkReq8Valid1 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + * SysClkReq5Valid2 = disabled + * SysClkReq6Valid2 = SysClkReq6 controlled + * SysClkReq7Valid2 = disabled + * SysClkReq8Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20), + /* + * VTVoutEna = disabled + * Vintcore12Ena = disabled + * Vintcore12Sel = 1.25 V + * Vintcore12LP = inactive (HP) + * VTVoutLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10), + /* + * VaudioEna = disabled + * VdmicEna = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), + /* + * VPll = Hw controlled + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02), + /* + * VrefDDREna = disabled + * VrefDDRSleepMode = inactive (no pulldown) + */ + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00), + /* + * VextSupply1Regu = HW control + * VextSupply2Regu = HW control + * VextSupply3Regu = HW control + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), + /* + * Vaux3regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00), + /* + * Vsmps1 = 1.15V + */ + INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24), + /* + * Vaux1Sel = 2.5 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07), + /* + * VextSupply12LP = disabled (no LP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00), + /* + * VanaDisch = short discharge time + * VdmicPullDownEna = pulldown disabled when Vdmic is disabled + * VdmicDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00), +}; + /* AB8500 regulators */ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ @@ -72,6 +272,7 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .max_uV = 2900000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* must be on for display */ }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 2675fae5253..94992158d96 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -14,6 +14,9 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> +extern struct ab8500_regulator_reg_init +ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; +extern struct regulator_init_data tps61052_regulator; #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8790d984cac..6e1907fa94f 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -20,7 +20,10 @@ #include <linux/amba/serial.h> #include <linux/spi/spi.h> #include <linux/mfd/ab8500.h> +#include <linux/regulator/ab8500.h> #include <linux/mfd/tc3589x.h> +#include <linux/mfd/tps6105x.h> +#include <linux/mfd/ab8500/gpio.h> #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/gpio_keys.h> @@ -41,10 +44,35 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { + .gpio_base = MOP500_AB8500_GPIO(0), + .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, + /* config_reg is the initial configuration of ab8500 pins. + * The pins can be configured as GPIO or alt functions based + * on value present in GpioSel1 to GpioSel6 and AlternatFunction + * register. This is the array of 7 configuration settings. + * One has to compile time decide these settings. Below is the + * explanation of these setting + * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO + * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO + * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO + * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO + * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO + * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO + * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured + * as GPIO then this register selectes the alternate fucntions + */ + .config_reg = {0x00, 0x1E, 0x80, 0x01, + 0x7A, 0x00, 0x00}, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, + .regulator_reg_init = ab8500_regulator_reg_init, + .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), + .gpio = &ab8500_gpio_pdata, }; static struct resource ab8500_resources[] = { @@ -66,6 +94,15 @@ struct platform_device ab8500_device = { }; /* + * TPS61052 + */ + +static struct tps6105x_platform_data mop500_tps61052_data = { + .mode = TPS6105X_MODE_VOLTAGE, + .regulator_data = &tps61052_regulator, +}; + +/* * TC35892 */ @@ -135,14 +172,21 @@ static struct lp5521_platform_data __initdata lp5521_sec_data = { .clock_mode = LP5521_CLOCK_EXT, }; -static struct i2c_board_info mop500_i2c0_devices[] = { +static struct i2c_board_info __initdata mop500_i2c0_devices[] = { { I2C_BOARD_INFO("tc3589x", 0x42), .irq = NOMADIK_GPIO_TO_IRQ(217), .platform_data = &mop500_tc35892_data, }, + /* I2C0 devices only available prior to HREFv60 */ + { + I2C_BOARD_INFO("tps61052", 0x33), + .platform_data = &mop500_tps61052_data, + }, }; +#define NUM_PRE_V60_I2C0_DEVICES 1 + static struct i2c_board_info __initdata mop500_i2c2_devices[] = { { /* lp5521 LED driver, 1st device */ @@ -380,6 +424,8 @@ static void __init mop500_uart_init(void) static void __init mop500_init_machine(void) { + int i2c0_devs; + /* * The HREFv60 board removed a GPIO expander and routed * all these GPIO pins to the internal GPIO controller @@ -403,8 +449,11 @@ static void __init mop500_init_machine(void) platform_device_register(&ab8500_device); - i2c_register_board_info(0, mop500_i2c0_devices, - ARRAY_SIZE(mop500_i2c0_devices)); + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + if (machine_is_hrefv60()) + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); } diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 56722f4be71..03a31cc9b08 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -27,6 +27,10 @@ #define GPIO_BU21013_CS MOP500_EGPIO(13) #define GPIO_SDMMC_EN MOP500_EGPIO(17) #define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) +#define MOP500_EGPIO_END MOP500_EGPIO(24) + +/* GPIOs on the AB8500 mixed-signals circuit */ +#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x)) struct i2c_board_info; diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 0fefb34c11e..16647b25537 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -58,7 +58,7 @@ #define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) #define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) -/* per7 base addressess */ +/* per7 base addresses */ #define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000) #define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000) #define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000) @@ -68,7 +68,7 @@ #define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) #define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) -/* per6 base addressess */ +/* per6 base addresses */ #define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) #define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) #define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) @@ -79,11 +79,11 @@ #define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) -/* per5 base addressess */ +/* per5 base addresses */ #define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) #define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) -/* per4 base addressess */ +/* per4 base addresses */ #define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) #define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) #define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) @@ -106,7 +106,7 @@ #define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) #define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) -/* per2 base addressess */ +/* per2 base addresses */ #define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) #define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) #define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 7cdeb2af0eb..97ef55f8493 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -35,9 +35,20 @@ #define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END #define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x)) -#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) +#define MOP500_STMPE1601_IRQ_END \ + MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) -#define MOP500_IRQ_END MOP500_NR_IRQS +/* AB8500 virtual gpio IRQ */ +#define AB8500_VIR_GPIO_NR_IRQS 16 + +#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \ + MOP500_STMPE1601_IRQ_END +#define MOP500_AB8500_VIR_GPIO_IRQ_END \ + (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS) + +#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END + +#define MOP500_IRQ_END MOP500_NR_IRQS #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c index 2288f6a7c51..5ba113309a0 100644 --- a/arch/arm/mach-ux500/localtimer.c +++ b/arch/arm/mach-ux500/localtimer.c @@ -21,8 +21,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-ux500/modem-irq-db5500.c b/arch/arm/mach-ux500/modem-irq-db5500.c index e1296a7447c..6b86416c94c 100644 --- a/arch/arm/mach-ux500/modem-irq-db5500.c +++ b/arch/arm/mach-ux500/modem-irq-db5500.c @@ -90,8 +90,7 @@ static irqreturn_t modem_cpu_irq_handler(int irq, void *data) static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip) { - set_irq_chip(irq, modem_irq_chip); - set_irq_handler(irq, handle_simple_irq); + irq_set_chip_and_handler(irq, modem_irq_chip, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); pr_debug("modem_irq: Created virtual IRQ %d\n", irq); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 136c32e7ed8..eb7ffa0ee8b 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -50,6 +50,8 @@ #include <mach/platform.h> #include <asm/hardware/timer-sp.h> +#include <plat/clcd.h> +#include <plat/fpga-irq.h> #include <plat/sched_clock.h> #include "core.h" @@ -63,47 +65,12 @@ #define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE) #define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE) -static void sic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - - writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); -} - -static void sic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - - writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET); -} - -static struct irq_chip sic_chip = { - .name = "SIC", - .irq_ack = sic_mask_irq, - .irq_mask = sic_mask_irq, - .irq_unmask = sic_unmask_irq, +static struct fpga_irq_data sic_irq = { + .base = VA_SIC_BASE, + .irq_start = IRQ_SIC_START, + .chip.name = "SIC", }; -static void -sic_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS); - - if (status == 0) { - do_bad_IRQ(irq, desc); - return; - } - - do { - irq = ffs(status) - 1; - status &= ~(1 << irq); - - irq += IRQ_SIC_START; - - generic_handle_irq(irq); - } while (status); -} - #if 1 #define IRQ_MMCI0A IRQ_VICSOURCE22 #define IRQ_AACI IRQ_VICSOURCE24 @@ -118,22 +85,11 @@ sic_handle_irq(unsigned int irq, struct irq_desc *desc) void __init versatile_init_irq(void) { - unsigned int i; - vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0); - set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq); - - /* Do second interrupt controller */ writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); - for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) { - if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) { - set_irq_chip(i, &sic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - } + fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq); /* * Interrupts on secondary controller from 0 to 8 are routed to @@ -476,127 +432,7 @@ static struct clk_lookup lookups[] = { #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) #define SYS_CLCD_ID_VGA (0x1f << 8) -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_3_8_in = { - .mode = { - .name = "Sanyo QVGA", - .refresh = 116, - .xres = 320, - .yres = 240, - .pixclock = 100000, - .left_margin = 6, - .right_margin = 6, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 6, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_2_5_in = { - .mode = { - .name = "Sanyo QVGA Portrait", - .refresh = 116, - .xres = 240, - .yres = 320, - .pixclock = 100000, - .left_margin = 20, - .right_margin = 10, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 10, - .vsync_len = 2, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel epson_2_2_in = { - .mode = { - .name = "Epson QCIF", - .refresh = 390, - .xres = 176, - .yres = 220, - .pixclock = 62500, - .left_margin = 3, - .right_margin = 2, - .upper_margin = 1, - .lower_margin = 0, - .hsync_len = 3, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static struct clcd_panel *versatile_clcd_panel(void) -{ - void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; - struct clcd_panel *panel = &vga; - u32 val; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel = &sanyo_3_8_in; - else if (val == SYS_CLCD_ID_SANYO_2_5) - panel = &sanyo_2_5_in; - else if (val == SYS_CLCD_ID_EPSON_2_2) - panel = &epson_2_2_in; - else if (val == SYS_CLCD_ID_VGA) - panel = &vga; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel = &vga; - } - - return panel; -} +static bool is_sanyo_2_5_lcd; /* * Disable all display connectors on the interface module. @@ -614,7 +450,7 @@ static void versatile_clcd_disable(struct clcd_fb *fb) /* * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off */ - if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) { + if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) { void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); unsigned long ctrl; @@ -630,18 +466,22 @@ static void versatile_clcd_disable(struct clcd_fb *fb) */ static void versatile_clcd_enable(struct clcd_fb *fb) { + struct fb_var_screeninfo *var = &fb->fb.var; void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; u32 val; val = readl(sys_clcd); val &= ~SYS_CLCD_MODE_MASK; - switch (fb->fb.var.green.length) { + switch (var->green.length) { case 5: val |= SYS_CLCD_MODE_5551; break; case 6: - val |= SYS_CLCD_MODE_565_RLSB; + if (var->red.offset == 0) + val |= SYS_CLCD_MODE_565_RLSB; + else + val |= SYS_CLCD_MODE_565_BLSB; break; case 8: val |= SYS_CLCD_MODE_888; @@ -663,7 +503,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb) /* * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on */ - if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) { + if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) { void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); unsigned long ctrl; @@ -674,50 +514,62 @@ static void versatile_clcd_enable(struct clcd_fb *fb) #endif } -static unsigned long framesize = SZ_1M; - +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ static int versatile_clcd_setup(struct clcd_fb *fb) { - dma_addr_t dma; + void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; + const char *panel_name; + u32 val; - fb->panel = versatile_clcd_panel(); + is_sanyo_2_5_lcd = false; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel_name = "Sanyo TM38QV67A02A"; + else if (val == SYS_CLCD_ID_SANYO_2_5) { + panel_name = "Sanyo QVGA Portrait"; + is_sanyo_2_5_lcd = true; + } else if (val == SYS_CLCD_ID_EPSON_2_2) + panel_name = "Epson L2F50113T00"; + else if (val == SYS_CLCD_ID_VGA) + panel_name = "VGA"; + else { + printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", + val); + panel_name = "VGA"; } - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; + fb->panel = versatile_clcd_get_panel(panel_name); + if (!fb->panel) + return -EINVAL; - return 0; + return versatile_clcd_setup_dma(fb, SZ_1M); } -static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} + clcdfb_decode(fb, regs); -static void versatile_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + /* Always clear BGR for RGB565: we do the routing externally */ + if (fb->fb.var.green.length == 6) + regs->cntl &= ~CNTL_BGR; } static struct clcd_board clcd_plat_data = { .name = "Versatile", + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, .check = clcdfb_check, - .decode = clcdfb_decode, + .decode = versatile_clcd_decode, .disable = versatile_clcd_disable, .enable = versatile_clcd_enable, .setup = versatile_clcd_setup, - .mmap = versatile_clcd_mmap, - .remove = versatile_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; static struct pl061_platform_data gpio0_plat_data = { @@ -737,53 +589,35 @@ static struct pl022_ssp_controller ssp0_plat_data = { }; #define AACI_IRQ { IRQ_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } /* * These devices are connected directly to the multi-layer AHB switch */ #define SMC_IRQ { NO_IRQ, NO_IRQ } -#define SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } -#define CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } -#define DMAC_DMA { 0, 0 } /* * These devices are connected via the core APB bridge */ #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } -#define WATCHDOG_DMA { 0, 0 } #define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } -#define GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define RTC_IRQ { IRQ_RTCINT, NO_IRQ } -#define RTC_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge */ #define SCI_IRQ { IRQ_SCIINT, NO_IRQ } -#define SCI_DMA { 7, 6 } #define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } -#define UART0_DMA { 15, 14 } #define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } -#define UART1_DMA { 13, 12 } #define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } -#define UART2_DMA { 11, 10 } #define SSP_IRQ { IRQ_SSPINT, NO_IRQ } -#define SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); @@ -865,14 +699,21 @@ static void versatile_leds_event(led_event_t ledevt) } #endif /* CONFIG_LEDS */ -void __init versatile_init(void) +/* Early initializations */ +void __init versatile_init_early(void) { - int i; - - osc4_clk.vcoreg = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET; + void __iomem *sys = __io_address(VERSATILE_SYS_BASE); + osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET; clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000); +} + +void __init versatile_init(void) +{ + int i; + platform_device_register(&versatile_flash_device); platform_device_register(&versatile_i2c_device); platform_device_register(&smc91x_device); @@ -889,12 +730,6 @@ void __init versatile_init(void) } /* - * The sched_clock counter - */ -#define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + \ - VERSATILE_SYS_24MHz_OFFSET) - -/* * Where is the timer (VA)? */ #define TIMER0_VA_BASE __io_address(VERSATILE_TIMER0_1_BASE) @@ -909,8 +744,6 @@ static void __init versatile_timer_init(void) { u32 val; - versatile_sched_clock_init(REFCOUNTER, 24000000); - /* * set clock frequency: * VERSATILE_REFCLK is 32KHz diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index 9d39886a835..fd6404e5d78 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> extern void __init versatile_init(void); +extern void __init versatile_init_early(void); extern void __init versatile_init_irq(void); extern void __init versatile_map_io(void); extern struct sys_timer versatile_timer; @@ -44,7 +45,6 @@ static struct amba_device name##_device = { \ }, \ .dma_mask = ~0, \ .irq = base##_IRQ, \ - /* .dma = base##_DMA,*/ \ } #endif diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index b5e75bb4496..6911e1f5f15 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -39,6 +39,6 @@ /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) -#define __io_address(n) __io(IO_ADDRESS(n)) +#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) #endif diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index aa9730fb13b..f8ae64b3eed 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -37,6 +37,7 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, .map_io = versatile_map_io, + .init_early = versatile_init_early, .init_irq = versatile_init_irq, .timer = &versatile_timer, .init_machine = versatile_init, diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index bf469642a3f..37c23dfeefb 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -59,19 +59,14 @@ static struct pl061_platform_data gpio3_plat_data = { }; #define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ } -#define UART3_DMA { 0x86, 0x87 } #define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ } -#define SCI1_DMA { 0x88, 0x89 } #define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B } -#define MMCI1_DMA { 0x85, 0 } /* * These devices are connected via the core APB bridge */ #define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge @@ -110,6 +105,7 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, .map_io = versatile_map_io, + .init_early = versatile_init_early, .init_irq = versatile_init_irq, .timer = &versatile_timer, .init_machine = versatile_pb_init, diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 3f19b660a16..931148487f0 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -5,5 +5,8 @@ config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" select CPU_V7 select ARM_GIC + select ARM_ERRATA_720789 + select ARM_ERRATA_751472 + select ARM_ERRATA_753970 endmenu diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 2c0ac7de281..90551b9780a 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -4,6 +4,5 @@ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index 362780d868d..f4397159c17 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -17,8 +17,3 @@ struct amba_device name##_device = { \ .irq = IRQ_##base, \ /* .dma = DMA_##base,*/ \ } - -struct map_desc; - -void v2m_map_io(struct map_desc *tile, size_t num); -extern struct sys_timer v2m_timer; diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index e9bccc5230c..ebc22e75932 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -10,19 +10,17 @@ #include <linux/amba/clcd.h> #include <linux/clkdev.h> -#include <asm/pgtable.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> -#include <asm/mach-types.h> #include <asm/pmu.h> +#include <asm/smp_scu.h> #include <asm/smp_twd.h> #include <mach/ct-ca9x4.h> #include <asm/hardware/timer-sp.h> -#include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -30,6 +28,8 @@ #include <mach/motherboard.h> +#include <plat/clcd.h> + #define V2M_PA_CS7 0x10000000 static struct map_desc ct_ca9x4_io_desc[] __initdata = { @@ -56,7 +56,7 @@ static void __init ct_ca9x4_map_io(void) #ifdef CONFIG_LOCAL_TIMERS twd_base = MMIO_P2V(A9_MPCORE_TWD); #endif - v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); + iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } static void __init ct_ca9x4_init_irq(void) @@ -80,29 +80,6 @@ static struct sys_timer ct_ca9x4_timer = { }; #endif -static struct clcd_panel xvga_panel = { - .mode = { - .name = "XVGA", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15384, - .left_margin = 168, - .right_margin = 8, - .upper_margin = 29, - .lower_margin = 3, - .hsync_len = 144, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) { v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0); @@ -112,42 +89,23 @@ static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) { unsigned long framesize = 1024 * 768 * 2; - dma_addr_t dma; - fb->panel = &xvga_panel; + fb->panel = versatile_clcd_get_panel("XVGA"); + if (!fb->panel) + return -EINVAL; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map frame buffer\n"); - return -ENOMEM; - } - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} - -static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base, - fb->fb.fix.smem_start, fb->fb.fix.smem_len); -} - -static void ct_ca9x4_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, framesize); } static struct clcd_board ct_ca9x4_clcd_data = { .name = "CT-CA9X4", + .caps = CLCD_CAP_5551 | CLCD_CAP_565, .check = clcdfb_check, .decode = clcdfb_decode, .enable = ct_ca9x4_clcd_enable, .setup = ct_ca9x4_clcd_setup, - .mmap = ct_ca9x4_clcd_mmap, - .remove = ct_ca9x4_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); @@ -220,6 +178,11 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static void __init ct_ca9x4_init_early(void) +{ + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); +} + static void __init ct_ca9x4_init(void) { int i; @@ -234,22 +197,40 @@ static void __init ct_ca9x4_init(void) l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); platform_device_register(&pmu_device); } -MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") - .boot_params = PLAT_PHYS_OFFSET + 0x00000100, +#ifdef CONFIG_SMP +static void ct_ca9x4_init_cpu_map(void) +{ + int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU)); + + for (i = 0; i < ncores; ++i) + set_cpu_possible(i, true); +} + +static void ct_ca9x4_smp_enable(unsigned int max_cpus) +{ + int i; + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + scu_enable(MMIO_P2V(A9_MPCORE_SCU)); +} +#endif + +struct ct_desc ct_ca9x4_desc __initdata = { + .id = V2M_CT_ID_CA9, + .name = "CA9x4", .map_io = ct_ca9x4_map_io, + .init_early = ct_ca9x4_init_early, .init_irq = ct_ca9x4_init_irq, -#if 0 - .timer = &ct_ca9x4_timer, -#else - .timer = &v2m_timer, + .init_tile = ct_ca9x4_init, +#ifdef CONFIG_SMP + .init_cpu_map = ct_ca9x4_init_cpu_map, + .smp_enable = ct_ca9x4_smp_enable, #endif - .init_machine = ct_ca9x4_init, -MACHINE_END +}; diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h index f9e2f8d2296..a34d3d4faae 100644 --- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h +++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -45,4 +45,6 @@ #define IRQ_CT_CA9X4_PMU_CPU2 94 #define IRQ_CT_CA9X4_PMU_CPU3 95 +extern struct ct_desc ct_ca9x4_desc; + #endif diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h index 98a8ded055b..0a3a3751840 100644 --- a/arch/arm/mach-vexpress/include/mach/motherboard.h +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -118,4 +118,26 @@ int v2m_cfg_write(u32 devfn, u32 data); int v2m_cfg_read(u32 devfn, u32 *data); +/* + * Core tile IDs + */ +#define V2M_CT_ID_CA9 0x0c000191 +#define V2M_CT_ID_UNSUPPORTED 0xff000191 +#define V2M_CT_ID_MASK 0xff000fff + +struct ct_desc { + u32 id; + const char *name; + void (*map_io)(void); + void (*init_early)(void); + void (*init_irq)(void); + void (*init_tile)(void); +#ifdef CONFIG_SMP + void (*init_cpu_map)(void); + void (*smp_enable)(unsigned int); +#endif +}; + +extern struct ct_desc *ct_desc; + #endif diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 634bf1d3a31..2b5f7ac001a 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -10,114 +10,17 @@ */ #include <linux/init.h> #include <linux/errno.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <asm/cacheflush.h> -#include <asm/smp_scu.h> #include <asm/unified.h> -#include <mach/ct-ca9x4.h> #include <mach/motherboard.h> #define V2M_PA_CS7 0x10000000 #include "core.h" -extern void vexpress_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int __cpuinitdata pen_release = -1; - -/* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency - * or not. This is necessary for the hotplug code to work reliably. - */ -static void __cpuinit write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); - outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); -} - -static void __iomem *scu_base_addr(void) -{ - return MMIO_P2V(A9_MPCORE_SCU); -} - -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * Set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * This is really belt and braces; we hold unintended secondary - * CPUs in the holding pen until we're ready for them. However, - * since we haven't sent them a soft interrupt, they shouldn't - * be there. - */ - write_pen_release(cpu); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - smp_cross_call(cpumask_of(cpu), 1); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} +extern void versatile_secondary_startup(void); /* * Initialise the CPU possible map early - this describes the CPUs @@ -125,36 +28,16 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ void __init smp_init_cpus(void) { - void __iomem *scu_base = scu_base_addr(); - unsigned int i, ncores; - - ncores = scu_base ? scu_get_core_count(scu_base) : 1; - - /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "vexpress: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); + ct_desc->init_cpu_map(); } void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - - scu_enable(scu_base_addr()); + ct_desc->smp_enable(max_cpus); /* * Write the address of secondary startup into the @@ -163,6 +46,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * secondary CPU branches to this address. */ writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); - writel(BSYM(virt_to_phys(vexpress_secondary_startup)), + writel(BSYM(virt_to_phys(versatile_secondary_startup)), MMIO_P2V(V2M_SYS_FLAGSSET)); } diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 1edae65a0e7..ba46e8e0743 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -7,13 +7,16 @@ #include <linux/io.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/ata_platform.h> #include <linux/smsc911x.h> #include <linux/spinlock.h> #include <linux/sysdev.h> #include <linux/usb/isp1760.h> #include <linux/clkdev.h> +#include <asm/mach-types.h> #include <asm/sizes.h> +#include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -21,6 +24,7 @@ #include <asm/hardware/timer-sp.h> #include <asm/hardware/sp810.h> +#include <mach/ct-ca9x4.h> #include <mach/motherboard.h> #include <plat/sched_clock.h> @@ -42,19 +46,16 @@ static struct map_desc v2m_io_desc[] __initdata = { }, }; -void __init v2m_map_io(struct map_desc *tile, size_t num) +static void __init v2m_init_early(void) { - iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); - iotable_init(tile, num); + ct_desc->init_early(); + versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); } - static void __init v2m_timer_init(void) { u32 scctrl; - versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); - /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL)); scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; @@ -68,7 +69,7 @@ static void __init v2m_timer_init(void) sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0); } -struct sys_timer v2m_timer = { +static struct sys_timer v2m_timer = { .init = v2m_timer_init, }; @@ -249,6 +250,29 @@ static struct platform_device v2m_flash_device = { .dev.platform_data = &v2m_flash_data, }; +static struct pata_platform_info v2m_pata_data = { + .ioport_shift = 2, +}; + +static struct resource v2m_pata_resources[] = { + { + .start = V2M_CF, + .end = V2M_CF + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = V2M_CF + 0x100, + .end = V2M_CF + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device v2m_cf_device = { + .name = "pata_platform", + .id = -1, + .resource = v2m_pata_resources, + .num_resources = ARRAY_SIZE(v2m_pata_resources), + .dev.platform_data = &v2m_pata_data, +}; static unsigned int v2m_mmci_status(struct device *dev) { @@ -354,7 +378,44 @@ static void v2m_restart(char str, const char *cmd) printk(KERN_EMERG "Unable to reboot\n"); } -static int __init v2m_init(void) +struct ct_desc *ct_desc; + +static struct ct_desc *ct_descs[] __initdata = { +#ifdef CONFIG_ARCH_VEXPRESS_CA9X4 + &ct_ca9x4_desc, +#endif +}; + +static void __init v2m_populate_ct_desc(void) +{ + int i; + u32 current_tile_id; + + ct_desc = NULL; + current_tile_id = readl(MMIO_P2V(V2M_SYS_PROCID0)) & V2M_CT_ID_MASK; + + for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i) + if (ct_descs[i]->id == current_tile_id) + ct_desc = ct_descs[i]; + + if (!ct_desc) + panic("vexpress: failed to populate core tile description " + "for tile ID 0x%8x\n", current_tile_id); +} + +static void __init v2m_map_io(void) +{ + iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); + v2m_populate_ct_desc(); + ct_desc->map_io(); +} + +static void __init v2m_init_irq(void) +{ + ct_desc->init_irq(); +} + +static void __init v2m_init(void) { int i; @@ -363,6 +424,7 @@ static int __init v2m_init(void) platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); + platform_device_register(&v2m_cf_device); platform_device_register(&v2m_eth_device); platform_device_register(&v2m_usb_device); @@ -372,6 +434,14 @@ static int __init v2m_init(void) pm_power_off = v2m_power_off; arm_pm_restart = v2m_restart; - return 0; + ct_desc->init_tile(); } -arch_initcall(v2m_init); + +MACHINE_START(VEXPRESS, "ARM-Versatile Express") + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, + .map_io = v2m_map_io, + .init_early = v2m_init_early, + .init_irq = v2m_init_irq, + .timer = &v2m_timer, + .init_machine = v2m_init, +MACHINE_END diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c index 5f4ddde4f02..245140c0df1 100644 --- a/arch/arm/mach-vt8500/irq.c +++ b/arch/arm/mach-vt8500/irq.c @@ -97,15 +97,15 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) return -EINVAL; case IRQF_TRIGGER_HIGH: dctr |= VT8500_TRIGGER_HIGH; - irq_desc[orig_irq].handle_irq = handle_level_irq; + __irq_set_handler_locked(orig_irq, handle_level_irq); break; case IRQF_TRIGGER_FALLING: dctr |= VT8500_TRIGGER_FALLING; - irq_desc[orig_irq].handle_irq = handle_edge_irq; + __irq_set_handler_locked(orig_irq, handle_edge_irq); break; case IRQF_TRIGGER_RISING: dctr |= VT8500_TRIGGER_RISING; - irq_desc[orig_irq].handle_irq = handle_edge_irq; + __irq_set_handler_locked(orig_irq, handle_edge_irq); break; } writeb(dctr, base + VT8500_IC_DCTR + irq); @@ -136,8 +136,8 @@ void __init vt8500_init_irq(void) /* Disable all interrupts and route them to IRQ */ writeb(0x00, ic_regbase + VT8500_IC_DCTR + i); - set_irq_chip(i, &vt8500_irq_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &vt8500_irq_chip, + handle_level_irq); set_irq_flags(i, IRQF_VALID); } } else { @@ -167,8 +167,8 @@ void __init wm8505_init_irq(void) writeb(0x00, sic_regbase + VT8500_IC_DCTR + i - 64); - set_irq_chip(i, &vt8500_irq_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &vt8500_irq_chip, + handle_level_irq); set_irq_flags(i, IRQF_VALID); } } else { diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c index 9c350103dcd..7bf143c443f 100644 --- a/arch/arm/mach-w90x900/irq.c +++ b/arch/arm/mach-w90x900/irq.c @@ -207,8 +207,8 @@ void __init nuc900_init_irq(void) __raw_writel(0xFFFFFFFE, REG_AIC_MDCR); for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) { - set_irq_chip(irqno, &nuc900_irq_chip); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &nuc900_irq_chip, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } } diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index d3644db467b..f40c69656d8 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -32,7 +32,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. * * Size Clean (ticks) Dirty (ticks) * 4096 21 20 21 53 55 54 diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index 49c2b66cf3d..a7b276dbda1 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -34,7 +34,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. * * *** This needs benchmarking */ diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 6136e68ce95..dc18d81ef8c 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -96,7 +96,7 @@ ENDPROC(v7_flush_dcache_all) * Flush the entire cache system. * The data cache flush is now achieved using atomic clean / invalidates * working outwards from L1 cache. This is done using Set/Way based cache - * maintainance instructions. + * maintenance instructions. * The instruction cache can still be invalidated back to the point of * unification in a single instruction. * diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4771dba6144..82a093cee09 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -149,6 +149,7 @@ static int __init consistent_init(void) { int ret = 0; pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; int i = 0; @@ -156,7 +157,15 @@ static int __init consistent_init(void) do { pgd = pgd_offset(&init_mm, base); - pmd = pmd_alloc(&init_mm, pgd, base); + + pud = pud_alloc(&init_mm, pgd, base); + if (!pud) { + printk(KERN_ERR "%s: no pud tables\n", __func__); + ret = -ENOMEM; + break; + } + + pmd = pmd_alloc(&init_mm, pud, base); if (!pmd) { printk(KERN_ERR "%s: no pmd tables\n", __func__); ret = -ENOMEM; diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 01210dba022..7cab7917942 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -95,6 +95,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address, { spinlock_t *ptl; pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; int ret; @@ -103,7 +104,11 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address, if (pgd_none_or_clear_bad(pgd)) return 0; - pmd = pmd_offset(pgd, address); + pud = pud_offset(pgd, address); + if (pud_none_or_clear_bad(pud)) + return 0; + + pmd = pmd_offset(pud, address); if (pmd_none_or_clear_bad(pmd)) return 0; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index f10f9bac220..bc0e1d88fd3 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -76,9 +76,11 @@ void show_pte(struct mm_struct *mm, unsigned long addr) printk(KERN_ALERT "pgd = %p\n", mm->pgd); pgd = pgd_offset(mm, addr); - printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd)); + printk(KERN_ALERT "[%08lx] *pgd=%08llx", + addr, (long long)pgd_val(*pgd)); do { + pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -90,9 +92,21 @@ void show_pte(struct mm_struct *mm, unsigned long addr) break; } - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + if (PTRS_PER_PUD != 1) + printk(", *pud=%08lx", pud_val(*pud)); + + if (pud_none(*pud)) + break; + + if (pud_bad(*pud)) { + printk("(bad)"); + break; + } + + pmd = pmd_offset(pud, addr); if (PTRS_PER_PMD != 1) - printk(", *pmd=%08lx", pmd_val(*pmd)); + printk(", *pmd=%08llx", (long long)pmd_val(*pmd)); if (pmd_none(*pmd)) break; @@ -107,8 +121,9 @@ void show_pte(struct mm_struct *mm, unsigned long addr) break; pte = pte_offset_map(pmd, addr); - printk(", *pte=%08lx", pte_val(*pte)); - printk(", *ppte=%08lx", pte_val(pte[PTE_HWTABLE_PTRS])); + printk(", *pte=%08llx", (long long)pte_val(*pte)); + printk(", *ppte=%08llx", + (long long)pte_val(pte[PTE_HWTABLE_PTRS])); pte_unmap(pte); } while(0); @@ -388,6 +403,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr, { unsigned int index; pgd_t *pgd, *pgd_k; + pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; if (addr < TASK_SIZE) @@ -406,12 +422,19 @@ do_translation_fault(unsigned long addr, unsigned int fsr, if (pgd_none(*pgd_k)) goto bad_area; - if (!pgd_present(*pgd)) set_pgd(pgd, *pgd_k); - pmd_k = pmd_offset(pgd_k, addr); - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + pud_k = pud_offset(pgd_k, addr); + + if (pud_none(*pud_k)) + goto bad_area; + if (!pud_present(*pud)) + set_pud(pud, *pud_k); + + pmd = pmd_offset(pud, addr); + pmd_k = pmd_offset(pud_k, addr); /* * On ARM one Linux PGD entry contains two hardware entries (see page diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 57299446f78..2be9139a4ef 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -4,10 +4,10 @@ #include <asm/pgalloc.h> #include <asm/pgtable.h> -static void idmap_add_pmd(pgd_t *pgd, unsigned long addr, unsigned long end, +static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, unsigned long prot) { - pmd_t *pmd = pmd_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); addr = (addr & PMD_MASK) | prot; pmd[0] = __pmd(addr); @@ -16,6 +16,18 @@ static void idmap_add_pmd(pgd_t *pgd, unsigned long addr, unsigned long end, flush_pmd_entry(pmd); } +static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end, + unsigned long prot) +{ + pud_t *pud = pud_offset(pgd, addr); + unsigned long next; + + do { + next = pud_addr_end(addr, end); + idmap_add_pmd(pud, addr, next, prot); + } while (pud++, addr = next, addr != end); +} + void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end) { unsigned long prot, next; @@ -27,17 +39,28 @@ void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end) pgd += pgd_index(addr); do { next = pgd_addr_end(addr, end); - idmap_add_pmd(pgd, addr, next, prot); + idmap_add_pud(pgd, addr, next, prot); } while (pgd++, addr = next, addr != end); } #ifdef CONFIG_SMP -static void idmap_del_pmd(pgd_t *pgd, unsigned long addr, unsigned long end) +static void idmap_del_pmd(pud_t *pud, unsigned long addr, unsigned long end) { - pmd_t *pmd = pmd_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); pmd_clear(pmd); } +static void idmap_del_pud(pgd_t *pgd, unsigned long addr, unsigned long end) +{ + pud_t *pud = pud_offset(pgd, addr); + unsigned long next; + + do { + next = pud_addr_end(addr, end); + idmap_del_pmd(pud, addr, next); + } while (pud++, addr = next, addr != end); +} + void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end) { unsigned long next; @@ -45,7 +68,7 @@ void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end) pgd += pgd_index(addr); do { next = pgd_addr_end(addr, end); - idmap_del_pmd(pgd, addr, next); + idmap_del_pud(pgd, addr, next); } while (pgd++, addr = next, addr != end); } #endif diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index cddd684364d..e591513bb53 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -78,7 +78,7 @@ __tagtable(ATAG_INITRD2, parse_tag_initrd2); */ struct meminfo meminfo; -void show_mem(void) +void show_mem(unsigned int filter) { int free = 0, total = 0, reserved = 0; int shared = 0, cached = 0, slab = 0, i; @@ -350,7 +350,7 @@ void __init bootmem_init(void) */ arm_bootmem_free(min, max_low, max_high); - high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; + high_memory = __va(((phys_addr_t)max_low << PAGE_SHIFT) - 1) + 1; /* * This doesn't seem to be used by the Linux memory manager any @@ -392,14 +392,14 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn) * Convert start_pfn/end_pfn to a struct page pointer. */ start_pg = pfn_to_page(start_pfn - 1) + 1; - end_pg = pfn_to_page(end_pfn); + end_pg = pfn_to_page(end_pfn - 1) + 1; /* * Convert to physical addresses, and * round start upwards and end downwards. */ - pg = PAGE_ALIGN(__pa(start_pg)); - pgend = __pa(end_pg) & PAGE_MASK; + pg = (unsigned long)PAGE_ALIGN(__pa(start_pg)); + pgend = (unsigned long)__pa(end_pg) & PAGE_MASK; /* * If there are free pages between these, @@ -426,6 +426,14 @@ static void __init free_unused_memmap(struct meminfo *mi) bank_start = bank_pfn_start(bank); +#ifdef CONFIG_SPARSEMEM + /* + * Take care not to free memmap entries that don't exist + * due to SPARSEMEM sections which aren't present. + */ + bank_start = min(bank_start, + ALIGN(prev_bank_end, PAGES_PER_SECTION)); +#endif /* * If we had a previous bank, and there is a space * between the current bank and the previous, free it. @@ -440,6 +448,12 @@ static void __init free_unused_memmap(struct meminfo *mi) */ prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES); } + +#ifdef CONFIG_SPARSEMEM + if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION)) + free_memmap(prev_bank_end, + ALIGN(prev_bank_end, PAGES_PER_SECTION)); +#endif } static void __init free_highpages(void) diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 36960df5fb7..d2384106af9 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -7,7 +7,7 @@ extern pmd_t *top_pmd; static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) { - return pmd_offset(pgd, virt); + return pmd_offset(pud_offset(pgd, virt), virt); } static inline pmd_t *pmd_off_k(unsigned long virt) diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index afe209e1e1f..74be05f3e03 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -7,6 +7,7 @@ #include <linux/shm.h> #include <linux/sched.h> #include <linux/io.h> +#include <linux/personality.h> #include <linux/random.h> #include <asm/cputype.h> #include <asm/system.h> @@ -82,7 +83,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, mm->cached_hole_size = 0; } /* 8 bits of randomness in 20 address space bits */ - if (current->flags & PF_RANDOMIZE) + if ((current->flags & PF_RANDOMIZE) && + !(current->personality & ADDR_NO_RANDOMIZE)) addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT; full_search: diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index ff7b43b5885..6cf76b3b68d 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -533,7 +533,7 @@ static void __init *early_alloc(unsigned long sz) static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot) { if (pmd_none(*pmd)) { - pte_t *pte = early_alloc(2 * PTRS_PER_PTE * sizeof(pte_t)); + pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE); __pmd_populate(pmd, __pa(pte), prot); } BUG_ON(pmd_bad(*pmd)); @@ -551,11 +551,11 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (pte++, addr += PAGE_SIZE, addr != end); } -static void __init alloc_init_section(pgd_t *pgd, unsigned long addr, +static void __init alloc_init_section(pud_t *pud, unsigned long addr, unsigned long end, phys_addr_t phys, const struct mem_type *type) { - pmd_t *pmd = pmd_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); /* * Try a section mapping - end, addr and phys must all be aligned @@ -584,6 +584,19 @@ static void __init alloc_init_section(pgd_t *pgd, unsigned long addr, } } +static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end, + unsigned long phys, const struct mem_type *type) +{ + pud_t *pud = pud_offset(pgd, addr); + unsigned long next; + + do { + next = pud_addr_end(addr, end); + alloc_init_section(pud, addr, next, phys, type); + phys += next - addr; + } while (pud++, addr = next, addr != end); +} + static void __init create_36bit_mapping(struct map_desc *md, const struct mem_type *type) { @@ -592,13 +605,13 @@ static void __init create_36bit_mapping(struct map_desc *md, pgd_t *pgd; addr = md->virtual; - phys = (unsigned long)__pfn_to_phys(md->pfn); + phys = __pfn_to_phys(md->pfn); length = PAGE_ALIGN(md->length); if (!(cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())) { printk(KERN_ERR "MM: CPU does not support supersection " "mapping for 0x%08llx at 0x%08lx\n", - __pfn_to_phys((u64)md->pfn), addr); + (long long)__pfn_to_phys((u64)md->pfn), addr); return; } @@ -611,14 +624,14 @@ static void __init create_36bit_mapping(struct map_desc *md, if (type->domain) { printk(KERN_ERR "MM: invalid domain in supersection " "mapping for 0x%08llx at 0x%08lx\n", - __pfn_to_phys((u64)md->pfn), addr); + (long long)__pfn_to_phys((u64)md->pfn), addr); return; } if ((addr | length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) { - printk(KERN_ERR "MM: cannot create mapping for " - "0x%08llx at 0x%08lx invalid alignment\n", - __pfn_to_phys((u64)md->pfn), addr); + printk(KERN_ERR "MM: cannot create mapping for 0x%08llx" + " at 0x%08lx invalid alignment\n", + (long long)__pfn_to_phys((u64)md->pfn), addr); return; } @@ -631,7 +644,8 @@ static void __init create_36bit_mapping(struct map_desc *md, pgd = pgd_offset_k(addr); end = addr + length; do { - pmd_t *pmd = pmd_offset(pgd, addr); + pud_t *pud = pud_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); int i; for (i = 0; i < 16; i++) @@ -652,22 +666,23 @@ static void __init create_36bit_mapping(struct map_desc *md, */ static void __init create_mapping(struct map_desc *md) { - unsigned long phys, addr, length, end; + unsigned long addr, length, end; + phys_addr_t phys; const struct mem_type *type; pgd_t *pgd; if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { - printk(KERN_WARNING "BUG: not creating mapping for " - "0x%08llx at 0x%08lx in user region\n", - __pfn_to_phys((u64)md->pfn), md->virtual); + printk(KERN_WARNING "BUG: not creating mapping for 0x%08llx" + " at 0x%08lx in user region\n", + (long long)__pfn_to_phys((u64)md->pfn), md->virtual); return; } if ((md->type == MT_DEVICE || md->type == MT_ROM) && md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " - "overlaps vmalloc space\n", - __pfn_to_phys((u64)md->pfn), md->virtual); + printk(KERN_WARNING "BUG: mapping for 0x%08llx" + " at 0x%08lx overlaps vmalloc space\n", + (long long)__pfn_to_phys((u64)md->pfn), md->virtual); } type = &mem_types[md->type]; @@ -681,13 +696,13 @@ static void __init create_mapping(struct map_desc *md) } addr = md->virtual & PAGE_MASK; - phys = (unsigned long)__pfn_to_phys(md->pfn); + phys = __pfn_to_phys(md->pfn); length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK)); if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) { - printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " + printk(KERN_WARNING "BUG: map for 0x%08llx at 0x%08lx can not " "be mapped using pages, ignoring.\n", - __pfn_to_phys(md->pfn), addr); + (long long)__pfn_to_phys(md->pfn), addr); return; } @@ -696,7 +711,7 @@ static void __init create_mapping(struct map_desc *md) do { unsigned long next = pgd_addr_end(addr, end); - alloc_init_section(pgd, addr, next, phys, type); + alloc_init_pud(pgd, addr, next, phys, type); phys += next - addr; addr = next; @@ -794,9 +809,10 @@ static void __init sanity_check_meminfo(void) */ if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) { - printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx " + printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx " "(vmalloc region overlap).\n", - bank->start, bank->start + bank->size - 1); + (unsigned long long)bank->start, + (unsigned long long)bank->start + bank->size - 1); continue; } @@ -807,10 +823,11 @@ static void __init sanity_check_meminfo(void) if (__va(bank->start + bank->size) > vmalloc_min || __va(bank->start + bank->size) < __va(bank->start)) { unsigned long newsize = vmalloc_min - __va(bank->start); - printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx " - "to -%.8lx (vmalloc region overlap).\n", - bank->start, bank->start + bank->size - 1, - bank->start + newsize - 1); + printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " + "to -%.8llx (vmalloc region overlap).\n", + (unsigned long long)bank->start, + (unsigned long long)bank->start + bank->size - 1, + (unsigned long long)bank->start + newsize - 1); bank->size = newsize; } #endif diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 709244c66fa..b2027c154b2 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -23,6 +23,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm) { pgd_t *new_pgd, *init_pgd; + pud_t *new_pud, *init_pud; pmd_t *new_pmd, *init_pmd; pte_t *new_pte, *init_pte; @@ -46,7 +47,11 @@ pgd_t *pgd_alloc(struct mm_struct *mm) * On ARM, first page must always be allocated since it * contains the machine vectors. */ - new_pmd = pmd_alloc(mm, new_pgd, 0); + new_pud = pud_alloc(mm, new_pgd, 0); + if (!new_pud) + goto no_pud; + + new_pmd = pmd_alloc(mm, new_pud, 0); if (!new_pmd) goto no_pmd; @@ -54,7 +59,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm) if (!new_pte) goto no_pte; - init_pmd = pmd_offset(init_pgd, 0); + init_pud = pud_offset(init_pgd, 0); + init_pmd = pmd_offset(init_pud, 0); init_pte = pte_offset_map(init_pmd, 0); set_pte_ext(new_pte, *init_pte, 0); pte_unmap(init_pte); @@ -66,6 +72,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm) no_pte: pmd_free(mm, new_pmd); no_pmd: + pud_free(mm, new_pud); +no_pud: free_pages((unsigned long)new_pgd, 2); no_pgd: return NULL; @@ -74,6 +82,7 @@ no_pgd: void pgd_free(struct mm_struct *mm, pgd_t *pgd_base) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pgtable_t pte; @@ -84,7 +93,11 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base) if (pgd_none_or_clear_bad(pgd)) goto no_pgd; - pmd = pmd_offset(pgd, 0); + pud = pud_offset(pgd, 0); + if (pud_none_or_clear_bad(pud)) + goto no_pud; + + pmd = pmd_offset(pud, 0); if (pmd_none_or_clear_bad(pmd)) goto no_pmd; @@ -92,8 +105,11 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base) pmd_clear(pmd); pte_free(mm, pte); no_pmd: - pgd_clear(pgd); + pud_clear(pud); pmd_free(mm, pmd); +no_pud: + pgd_clear(pgd); + pud_free(mm, pud); no_pgd: free_pages((unsigned long) pgd_base, 2); } diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 226e3d8351c..6c4e7fd6c8a 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -64,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 86d9c2cf0bc..4ce947c1962 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -64,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 83d3dd34f84..c8884c5413a 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 686043ee728..413684660aa 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 665266da143..7a06e5964f5 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -63,7 +63,7 @@ ENTRY(cpu_arm720_proc_fin) /* * Function: arm720_proc_do_idle(void) * Params : r0 = unused - * Purpose : put the processer in proper idle mode + * Purpose : put the processor in proper idle mode */ ENTRY(cpu_arm720_do_idle) mov pc, lr diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 219980ec8b6..bf8a1d1cccb 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 65536 @@ -390,7 +390,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size .equ cpu_arm920_suspend_size, 4 * 3 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r7, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 36154b1e792..95ba1fc56e4 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -54,7 +54,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. (I think this should + * cache line maintenance instructions. (I think this should * be 32768). */ #define CACHE_DLIMIT 8192 diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 89c5e0009c4..541e4774eea 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -77,7 +77,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 8192 diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 6a4bdb2c94a..0ed85d930c0 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -404,7 +404,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size .equ cpu_arm926_suspend_size, 4 * 3 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r7, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index e32fa499194..34261f9486b 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -85,7 +85,7 @@ /* * Sanity check the PTE configuration for the code below - which makes - * certain assumptions about how these bits are layed out. + * certain assumptions about how these bits are laid out. */ #ifdef CONFIG_MMU #if L_PTE_SHARED != PTE_EXT_SHARED diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 74483d1977f..184a9c997e3 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -171,7 +171,7 @@ ENTRY(cpu_sa1100_set_pte_ext) .globl cpu_sa1100_suspend_size .equ cpu_sa1100_suspend_size, 4*4 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_sa1100_do_suspend) stmfd sp!, {r4 - r7, lr} mrc p15, 0, r4, c3, c0, 0 @ domain ID diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 832b6bdc192..7c99cb4c8e4 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -124,7 +124,7 @@ ENTRY(cpu_v6_set_pte_ext) /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size .equ cpu_v6_suspend_size, 4 * 8 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_v6_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID @@ -132,7 +132,7 @@ ENTRY(cpu_v6_do_suspend) mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0 mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mrc p15, 0, r9, c1, c0, 1 @ auxillary control register + mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register mrc p15, 0, r10, c1, c0, 2 @ co-processor access control mrc p15, 0, r11, c1, c0, 0 @ control register stmia r0, {r4 - r11} @@ -151,7 +151,7 @@ ENTRY(cpu_v6_do_resume) mcr p15, 0, r6, c3, c0, 0 @ Domain ID mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0 mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mcr p15, 0, r9, c1, c0, 1 @ auxillary control register + mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register mcr p15, 0, r10, c1, c0, 2 @ co-processor access control mcr p15, 0, ip, c2, c0, 2 @ TTB control register mcr p15, 0, ip, c7, c5, 4 @ ISB diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 262fa88a743..babfba09c89 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -211,7 +211,7 @@ cpu_v7_name: /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size .equ cpu_v7_suspend_size, 4 * 8 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID @@ -237,7 +237,7 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 63d8b2044e8..596213699f3 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -417,7 +417,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .globl cpu_xsc3_suspend_size .equ cpu_xsc3_suspend_size, 4 * 8 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r10, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 086038cd86a..42af97664c9 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -395,7 +395,7 @@ ENTRY(xscale_dma_a0_map_area) teq r2, #DMA_TO_DEVICE beq xscale_dma_clean_range b xscale_dma_flush_range -ENDPROC(xscsale_dma_a0_map_area) +ENDPROC(xscale_dma_a0_map_area) /* * dma_unmap_area(start, size, dir) @@ -518,7 +518,7 @@ ENTRY(cpu_xscale_set_pte_ext) .globl cpu_xscale_suspend_size .equ cpu_xscale_suspend_size, 4 * 7 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_xscale_do_suspend) stmfd sp!, {r4 - r10, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c index c856fa39760..f0ba0726306 100644 --- a/arch/arm/plat-mxc/3ds_debugboard.c +++ b/arch/arm/plat-mxc/3ds_debugboard.c @@ -100,14 +100,9 @@ static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) expio_irq = MXC_BOARD_IRQ_START; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { - struct irq_desc *d; if ((int_valid & 1) == 0) continue; - d = irq_desc + expio_irq; - if (unlikely(!(d->handle_irq))) - pr_err("\nEXPIO irq: %d unhandled\n", expio_irq); - else - d->handle_irq(expio_irq, d); + generic_handle_irq(expio_irq); } desc->irq_data.chip->irq_ack(&desc->irq_data); @@ -186,12 +181,11 @@ int __init mxc_expio_init(u32 base, u32 p_irq) __raw_writew(0x1F, brd_io + INTR_MASK_REG); for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) { - set_irq_chip(i, &expio_irq_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID); } - set_irq_type(p_irq, IRQF_TRIGGER_LOW); - set_irq_chained_handler(p_irq, mxc_expio_irq_handler); + irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW); + irq_set_chained_handler(p_irq, mxc_expio_irq_handler); /* Register Lan device on the debugboard */ smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index deb284bc7c4..09e2bd0fcdc 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -139,8 +139,8 @@ void __init mxc_init_irq(void __iomem *irqbase) __raw_writel(0, avic_base + AVIC_INTTYPEH); __raw_writel(0, avic_base + AVIC_INTTYPEL); for (i = 0; i < MXC_INTERNAL_IRQS; i++) { - set_irq_chip(i, &mxc_avic_chip.base); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &mxc_avic_chip.base, + handle_level_irq); set_irq_flags(i, IRQF_VALID); } diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index ce81481becf..4268a2bdf14 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -13,7 +13,7 @@ /* * A driver for the Freescale Semiconductor i.MXC CPUfreq module. - * The CPUFREQ driver is for controling CPU frequency. It allows you to change + * The CPUFREQ driver is for controlling CPU frequency. It allows you to change * the CPU clock speed on the fly. */ diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index 6561c9df5f0..ccc789e21da 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -53,7 +53,7 @@ struct platform_device *__init imx_add_fec( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_4K, + .end = data->iobase + SZ_4K - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c index 10653cc8d1f..805336fdc25 100644 --- a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c +++ b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c @@ -27,7 +27,7 @@ struct platform_device *__init imx_add_imxdi_rtc( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_16K, + .end = data->iobase + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 57d59855f9e..6cd6d7f686f 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -175,7 +175,7 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) { u32 irq_stat; - struct mxc_gpio_port *port = get_irq_data(irq); + struct mxc_gpio_port *port = irq_get_handler_data(irq); irq_stat = __raw_readl(port->base + GPIO_ISR) & __raw_readl(port->base + GPIO_IMR); @@ -188,7 +188,7 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) { int i; u32 irq_msk, irq_stat; - struct mxc_gpio_port *port = get_irq_data(irq); + struct mxc_gpio_port *port = irq_get_handler_data(irq); /* walk through all interrupt status registers */ for (i = 0; i < gpio_table_size; i++) { @@ -295,6 +295,12 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip, return 0; } +/* + * This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) { int i, j; @@ -311,8 +317,9 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) __raw_writel(~0, port[i].base + GPIO_ISR); for (j = port[i].virtual_irq_start; j < port[i].virtual_irq_start + 32; j++) { - set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, handle_level_irq); + irq_set_lockdep_class(j, &gpio_lock_class); + irq_set_chip_and_handler(j, &gpio_irq_chip, + handle_level_irq); set_irq_flags(j, IRQF_VALID); } @@ -331,21 +338,23 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) { /* setup one handler for each entry */ - set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler); - set_irq_data(port[i].irq, &port[i]); + irq_set_chained_handler(port[i].irq, + mx3_gpio_irq_handler); + irq_set_handler_data(port[i].irq, &port[i]); if (port[i].irq_high) { /* setup handler for GPIO 16 to 31 */ - set_irq_chained_handler(port[i].irq_high, - mx3_gpio_irq_handler); - set_irq_data(port[i].irq_high, &port[i]); + irq_set_chained_handler(port[i].irq_high, + mx3_gpio_irq_handler); + irq_set_handler_data(port[i].irq_high, + &port[i]); } } } if (cpu_is_mx2()) { /* setup one handler for all GPIO interrupts */ - set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler); - set_irq_data(port[0].irq, port); + irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler); + irq_set_handler_data(port[0].irq, port); } return 0; diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h index 5cd6466964a..6fda788ed0e 100644 --- a/arch/arm/plat-mxc/include/mach/audmux.h +++ b/arch/arm/plat-mxc/include/mach/audmux.h @@ -15,6 +15,14 @@ #define MX31_AUDMUX_PORT5_SSI_PINS_5 4 #define MX31_AUDMUX_PORT6_SSI_PINS_6 5 +#define MX51_AUDMUX_PORT1_SSI0 0 +#define MX51_AUDMUX_PORT2_SSI1 1 +#define MX51_AUDMUX_PORT3 2 +#define MX51_AUDMUX_PORT4 3 +#define MX51_AUDMUX_PORT5 4 +#define MX51_AUDMUX_PORT6 5 +#define MX51_AUDMUX_PORT7 6 + /* Register definitions for the i.MX21/27 Digital Audio Multiplexer */ #define MXC_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff) #define MXC_AUDMUX_V1_PCR_INMEN (1 << 8) @@ -28,7 +36,7 @@ #define MXC_AUDMUX_V1_PCR_TCLKDIR (1 << 30) #define MXC_AUDMUX_V1_PCR_TFSDIR (1 << 31) -/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */ +/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */ #define MXC_AUDMUX_V2_PTCR_TFSDIR (1 << 31) #define MXC_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27) #define MXC_AUDMUX_V2_PTCR_TCLKDIR (1 << 26) diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index bd9bb979914..2e49e71b1b9 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -33,9 +33,9 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - @ this macro checks which interrupt occured + @ this macro checks which interrupt occurred @ and returns its number in irqnr - @ and returns if an interrupt occured in irqstat + @ and returns if an interrupt occurred in irqstat .macro get_irqnr_and_base, irqnr, irqstat, base, tmp #ifndef CONFIG_MXC_TZIC @ Load offset & priority of the highest priority diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h index a48a9aaa56b..86003f41175 100644 --- a/arch/arm/plat-mxc/include/mach/esdhc.h +++ b/arch/arm/plat-mxc/include/mach/esdhc.h @@ -10,7 +10,17 @@ #ifndef __ASM_ARCH_IMX_ESDHC_H #define __ASM_ARCH_IMX_ESDHC_H +/** + * struct esdhc_platform_data - optional platform data for esdhc on i.MX + * + * strongly recommended for i.MX25/35, not needed for other variants + * + * @wp_gpio: gpio for write_protect (-EINVAL if unused) + * @cd_gpio: gpio for card_detect interrupt (-EINVAL if unused) + */ + struct esdhc_platform_data { - unsigned int wp_gpio; /* write protect pin */ + unsigned int wp_gpio; + unsigned int cd_gpio; }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h index c4f116d214f..7a9b20abda0 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h @@ -90,12 +90,12 @@ #define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) #define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) #define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19) -#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20) -#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21) -#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22) -#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23) -#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24) +#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) +#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) +#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) +#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) +#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 23) +#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) #define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) #define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) #define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h index aaec2a6e7b3..5f2da75a47f 100644 --- a/arch/arm/plat-mxc/include/mach/mx50.h +++ b/arch/arm/plat-mxc/include/mach/mx50.h @@ -282,4 +282,8 @@ #define MX50_INT_APBHDMA_CHAN6 116 #define MX50_INT_APBHDMA_CHAN7 117 +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) +extern int mx50_revision(void); +#endif + #endif /* ifndef __MACH_MX50_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 1eb339e6c85..dede19a766f 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -347,6 +347,7 @@ #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) extern int mx51_revision(void); +extern void mx51_display_revision(void); #endif /* tape-out 1 defines */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 7e072637eef..1aea818d9d3 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -51,6 +51,20 @@ #define IMX_CHIP_REVISION_3_3 0x33 #define IMX_CHIP_REVISION_UNKNOWN 0xff +#define IMX_CHIP_REVISION_1_0_STRING "1.0" +#define IMX_CHIP_REVISION_1_1_STRING "1.1" +#define IMX_CHIP_REVISION_1_2_STRING "1.2" +#define IMX_CHIP_REVISION_1_3_STRING "1.3" +#define IMX_CHIP_REVISION_2_0_STRING "2.0" +#define IMX_CHIP_REVISION_2_1_STRING "2.1" +#define IMX_CHIP_REVISION_2_2_STRING "2.2" +#define IMX_CHIP_REVISION_2_3_STRING "2.3" +#define IMX_CHIP_REVISION_3_0_STRING "3.0" +#define IMX_CHIP_REVISION_3_1_STRING "3.1" +#define IMX_CHIP_REVISION_3_2_STRING "3.2" +#define IMX_CHIP_REVISION_3_3_STRING "3.3" +#define IMX_CHIP_REVISION_UNKNOWN_STRING "unknown" + #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; #endif @@ -181,6 +195,15 @@ struct cpu_op { u32 cpu_rate; }; +int tzic_enable_wake(int is_idle); +enum mxc_cpu_pwr_mode { + WAIT_CLOCKED, /* wfi only */ + WAIT_UNCLOCKED, /* WAIT */ + WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */ + STOP_POWER_ON, /* just STOP */ + STOP_POWER_OFF, /* STOP + SRPG */ +}; + extern struct cpu_op *(*get_cpu_op)(int *op); #endif diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h index 04c0d060d81..6bb96ef1600 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -24,7 +24,7 @@ struct mxc_nand_platform_data { unsigned int width; /* data bus width in bytes */ - unsigned int hw_ecc:1; /* 0 if supress hardware ECC */ + unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */ unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ struct mtd_partition *parts; /* partition table */ int nr_parts; /* size of parts */ diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index 95be51bfe9a..0417da9f710 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -20,6 +20,8 @@ #include <mach/hardware.h> #include <mach/common.h> +extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); + static inline void arch_idle(void) { #ifdef CONFIG_ARCH_MXC91231 @@ -54,7 +56,9 @@ static inline void arch_idle(void) "orr %0, %0, #0x00000004\n" "mcr p15, 0, %0, c1, c0, 0\n" : "=r" (reg)); - } else + } else if (cpu_is_mx51()) + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + else cpu_do_idle(); } diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c index 0c799ac2773..e1c6eff7258 100644 --- a/arch/arm/plat-mxc/irq-common.c +++ b/arch/arm/plat-mxc/irq-common.c @@ -29,7 +29,7 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio) ret = -ENOSYS; - base = get_irq_chip(irq); + base = irq_get_chip(irq); if (base) { chip = container_of(base, struct mxc_irq_chip, base); if (chip->set_priority) @@ -48,7 +48,7 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type) ret = -ENOSYS; - base = get_irq_chip(irq); + base = irq_get_chip(irq); if (base) { chip = container_of(base, struct mxc_irq_chip, base); if (chip->set_irq_fiq) diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S index 4ddce565b35..8397a2dd19f 100644 --- a/arch/arm/plat-mxc/ssi-fiq.S +++ b/arch/arm/plat-mxc/ssi-fiq.S @@ -124,6 +124,8 @@ imx_ssi_fiq_start: 1: @ return from FIQ subs pc, lr, #4 + + .align imx_ssi_fiq_base: .word 0x0 imx_ssi_fiq_rx_buffer: diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 9f0c2610595..2237ff8b434 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -27,6 +27,7 @@ #include <linux/clk.h> #include <mach/hardware.h> +#include <asm/sched_clock.h> #include <asm/mach/time.h> #include <mach/common.h> @@ -105,6 +106,11 @@ static void gpt_irq_acknowledge(void) __raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT); } +static cycle_t dummy_get_cycles(struct clocksource *cs) +{ + return 0; +} + static cycle_t mx1_2_get_cycles(struct clocksource *cs) { return __raw_readl(timer_base + MX1_2_TCN); @@ -118,18 +124,35 @@ static cycle_t v2_get_cycles(struct clocksource *cs) static struct clocksource clocksource_mxc = { .name = "mxc_timer1", .rating = 200, - .read = mx1_2_get_cycles, + .read = dummy_get_cycles, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static DEFINE_CLOCK_DATA(cd); +unsigned long long notrace sched_clock(void) +{ + cycle_t cyc = clocksource_mxc.read(&clocksource_mxc); + + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +static void notrace mxc_update_sched_clock(void) +{ + cycle_t cyc = clocksource_mxc.read(&clocksource_mxc); + update_sched_clock(&cd, cyc, (u32)~0); +} + static int __init mxc_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); if (timer_is_v2()) clocksource_mxc.read = v2_get_cycles; + else + clocksource_mxc.read = mx1_2_get_cycles; + init_sched_clock(&cd, mxc_update_sched_clock, 32, c); clocksource_register_hz(&clocksource_mxc, c); return 0; diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index bc3a6be8a27..57f9395f87c 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -167,8 +167,8 @@ void __init tzic_init_irq(void __iomem *irqbase) /* all IRQ no FIQ Warning :: No selection */ for (i = 0; i < MXC_INTERNAL_IRQS; i++) { - set_irq_chip(i, &mxc_tzic_chip.base); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &mxc_tzic_chip.base, + handle_level_irq); set_irq_flags(i, IRQF_VALID); } diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 70620426ee5..f49748eca1a 100644 --- a/arch/arm/plat-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -54,6 +54,7 @@ struct nmk_gpio_chip { u32 rwimsc; u32 fwimsc; u32 slpm; + u32 enabled; }; static struct nmk_gpio_chip * @@ -318,7 +319,7 @@ static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep) struct nmk_gpio_chip *nmk_chip; int pin = PIN_NUM(cfgs[i]); - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(pin)); + nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(pin)); if (!nmk_chip) { ret = -EINVAL; break; @@ -397,7 +398,7 @@ int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) struct nmk_gpio_chip *nmk_chip; unsigned long flags; - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); if (!nmk_chip) return -EINVAL; @@ -430,7 +431,7 @@ int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull) struct nmk_gpio_chip *nmk_chip; unsigned long flags; - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); if (!nmk_chip) return -EINVAL; @@ -456,7 +457,7 @@ int nmk_gpio_set_mode(int gpio, int gpio_mode) struct nmk_gpio_chip *nmk_chip; unsigned long flags; - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); if (!nmk_chip) return -EINVAL; @@ -473,7 +474,7 @@ int nmk_gpio_get_mode(int gpio) struct nmk_gpio_chip *nmk_chip; u32 afunc, bfunc, bit; - nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); if (!nmk_chip) return -EINVAL; @@ -541,13 +542,6 @@ static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip, int gpio, bool on) { -#ifdef CONFIG_ARCH_U8500 - if (cpu_is_u8500v2()) { - __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, - on ? NMK_GPIO_SLPM_WAKEUP_ENABLE - : NMK_GPIO_SLPM_WAKEUP_DISABLE); - } -#endif __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); } @@ -564,6 +558,11 @@ static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable) if (!nmk_chip) return -EINVAL; + if (enable) + nmk_chip->enabled |= bitmask; + else + nmk_chip->enabled &= ~bitmask; + spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); spin_lock(&nmk_chip->lock); @@ -590,8 +589,6 @@ static void nmk_gpio_irq_unmask(struct irq_data *d) static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on) { - struct irq_desc *desc = irq_to_desc(d->irq); - bool enabled = !(desc->status & IRQ_DISABLED); struct nmk_gpio_chip *nmk_chip; unsigned long flags; u32 bitmask; @@ -606,7 +603,7 @@ static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on) spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); spin_lock(&nmk_chip->lock); - if (!enabled) + if (!(nmk_chip->enabled & bitmask)) __nmk_gpio_set_wake(nmk_chip, gpio, on); if (on) @@ -622,9 +619,7 @@ static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on) static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type) { - struct irq_desc *desc = irq_to_desc(d->irq); - bool enabled = !(desc->status & IRQ_DISABLED); - bool wake = desc->wake_depth; + bool enabled, wake = irqd_is_wakeup_set(d); int gpio; struct nmk_gpio_chip *nmk_chip; unsigned long flags; @@ -641,6 +636,8 @@ static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type) if (type & IRQ_TYPE_LEVEL_LOW) return -EINVAL; + enabled = nmk_chip->enabled & bitmask; + spin_lock_irqsave(&nmk_chip->lock, flags); if (enabled) @@ -681,7 +678,7 @@ static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc, u32 status) { struct nmk_gpio_chip *nmk_chip; - struct irq_chip *host_chip = get_irq_chip(irq); + struct irq_chip *host_chip = irq_get_chip(irq); unsigned int first_irq; if (host_chip->irq_mask_ack) @@ -692,7 +689,7 @@ static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc, host_chip->irq_ack(&desc->irq_data); } - nmk_chip = get_irq_data(irq); + nmk_chip = irq_get_handler_data(irq); first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); while (status) { int bit = __ffs(status); @@ -706,7 +703,7 @@ static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc, static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { - struct nmk_gpio_chip *nmk_chip = get_irq_data(irq); + struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq); u32 status = readl(nmk_chip->addr + NMK_GPIO_IS); __nmk_gpio_irq_handler(irq, desc, status); @@ -715,7 +712,7 @@ static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) static void nmk_gpio_secondary_irq_handler(unsigned int irq, struct irq_desc *desc) { - struct nmk_gpio_chip *nmk_chip = get_irq_data(irq); + struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq); u32 status = nmk_chip->get_secondary_status(nmk_chip->bank); __nmk_gpio_irq_handler(irq, desc, status); @@ -728,20 +725,20 @@ static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); for (i = first_irq; i < first_irq + nmk_chip->chip.ngpio; i++) { - set_irq_chip(i, &nmk_gpio_irq_chip); - set_irq_handler(i, handle_edge_irq); + irq_set_chip_and_handler(i, &nmk_gpio_irq_chip, + handle_edge_irq); set_irq_flags(i, IRQF_VALID); - set_irq_chip_data(i, nmk_chip); - set_irq_type(i, IRQ_TYPE_EDGE_FALLING); + irq_set_chip_data(i, nmk_chip); + irq_set_irq_type(i, IRQ_TYPE_EDGE_FALLING); } - set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); - set_irq_data(nmk_chip->parent_irq, nmk_chip); + irq_set_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); + irq_set_handler_data(nmk_chip->parent_irq, nmk_chip); if (nmk_chip->secondary_parent_irq >= 0) { - set_irq_chained_handler(nmk_chip->secondary_parent_irq, + irq_set_chained_handler(nmk_chip->secondary_parent_irq, nmk_gpio_secondary_irq_handler); - set_irq_data(nmk_chip->secondary_parent_irq, nmk_chip); + irq_set_handler_data(nmk_chip->secondary_parent_irq, nmk_chip); } return 0; @@ -832,51 +829,6 @@ static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) : "? ", (mode < 0) ? "unknown" : modes[mode], pull ? "pull" : "none"); - - if (!is_out) { - int irq = gpio_to_irq(gpio); - struct irq_desc *desc = irq_to_desc(irq); - - /* This races with request_irq(), set_irq_type(), - * and set_irq_wake() ... but those are "rare". - * - * More significantly, trigger type flags aren't - * currently maintained by genirq. - */ - if (irq >= 0 && desc->action) { - char *trigger; - - switch (desc->status & IRQ_TYPE_SENSE_MASK) { - case IRQ_TYPE_NONE: - trigger = "(default)"; - break; - case IRQ_TYPE_EDGE_FALLING: - trigger = "edge-falling"; - break; - case IRQ_TYPE_EDGE_RISING: - trigger = "edge-rising"; - break; - case IRQ_TYPE_EDGE_BOTH: - trigger = "edge-both"; - break; - case IRQ_TYPE_LEVEL_HIGH: - trigger = "level-high"; - break; - case IRQ_TYPE_LEVEL_LOW: - trigger = "level-low"; - break; - default: - trigger = "?trigger?"; - break; - } - - seq_printf(s, " irq-%d %s%s", - irq, trigger, - (desc->status & IRQ_WAKEUP) - ? " wakeup" : ""); - } - } - seq_printf(s, "\n"); } } diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index 4d6dd4c39b7..c44886062f8 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -104,6 +104,8 @@ struct stedma40_half_channel_info { * * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH * @high_priority: true if high-priority + * @realtime: true if realtime mode is to be enabled. Only available on DMA40 + * version 3+, i.e DB8500v2+ * @mode: channel mode: physical, logical, or operation * @mode_opt: options for the chosen channel mode * @src_dev_type: Src device type @@ -119,6 +121,7 @@ struct stedma40_half_channel_info { struct stedma40_chan_cfg { enum stedma40_xfer_dir dir; bool high_priority; + bool realtime; enum stedma40_mode mode; enum stedma40_mode_opt mode_opt; int src_dev_type; @@ -169,25 +172,6 @@ struct stedma40_platform_data { bool stedma40_filter(struct dma_chan *chan, void *data); /** - * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from - * scattergatter lists. - * - * @chan: dmaengine handle - * @sgl_dst: Destination scatter list - * @sgl_src: Source scatter list - * @sgl_len: The length of each scatterlist. Both lists must be of equal length - * and each element must match the corresponding element in the other scatter - * list. - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, - struct scatterlist *sgl_dst, - struct scatterlist *sgl_src, - unsigned int sgl_len, - unsigned long flags); - -/** * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave * (=device) * diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 7d9f815cede..ea28f98d5d6 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -280,7 +280,7 @@ EXPORT_SYMBOL(omap_dsp_get_mempool_base); * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 2ec3b5d9f21..c22217c2ee5 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1019,7 +1019,7 @@ EXPORT_SYMBOL(omap_set_dma_callback); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CSSA_L register overflow inbetween the two reads resulting + * is a chance for CSSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_src_pos(int lch) @@ -1046,7 +1046,7 @@ EXPORT_SYMBOL(omap_get_dma_src_pos); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CDSA_L register overflow inbetween the two reads resulting + * is a chance for CDSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_dst_pos(int lch) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 971d1863694..d2adcdda23c 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -755,18 +755,12 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) bank = irq_data_get_irq_chip_data(d); spin_lock_irqsave(&bank->lock, flags); retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); - if (retval == 0) { - struct irq_desc *desc = irq_to_desc(d->irq); - - desc->status &= ~IRQ_TYPE_SENSE_MASK; - desc->status |= type; - } spin_unlock_irqrestore(&bank->lock, flags); if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __set_irq_handler_unlocked(d->irq, handle_level_irq); + __irq_set_handler_locked(d->irq, handle_level_irq); else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __set_irq_handler_unlocked(d->irq, handle_edge_irq); + __irq_set_handler_locked(d->irq, handle_edge_irq); return retval; } @@ -1146,7 +1140,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) desc->irq_data.chip->irq_ack(&desc->irq_data); - bank = get_irq_data(irq); + bank = irq_get_handler_data(irq); #ifdef CONFIG_ARCH_OMAP1 if (bank->method == METHOD_MPUIO) isr_reg = bank->base + @@ -1270,8 +1264,7 @@ static void gpio_unmask_irq(struct irq_data *d) unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); unsigned int irq_mask = 1 << get_gpio_index(gpio); - struct irq_desc *desc = irq_to_desc(d->irq); - u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK; + u32 trigger = irqd_get_trigger_type(d); if (trigger) _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); @@ -1672,19 +1665,17 @@ static void __init omap_gpio_chip_init(struct gpio_bank *bank) for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + bank_width; j++) { - struct irq_desc *d = irq_to_desc(j); - - lockdep_set_class(&d->lock, &gpio_lock_class); - set_irq_chip_data(j, bank); + irq_set_lockdep_class(j, &gpio_lock_class); + irq_set_chip_data(j, bank); if (bank_is_mpuio(bank)) - set_irq_chip(j, &mpuio_irq_chip); + irq_set_chip(j, &mpuio_irq_chip); else - set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, handle_simple_irq); + irq_set_chip(j, &gpio_irq_chip); + irq_set_handler(j, handle_simple_irq); set_irq_flags(j, IRQF_VALID); } - set_irq_chained_handler(bank->irq, gpio_irq_handler); - set_irq_data(bank->irq, bank); + irq_set_chained_handler(bank->irq, gpio_irq_handler); + irq_set_handler_data(bank->irq, bank); } static int __devinit omap_gpio_probe(struct platform_device *pdev) diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h index 0f140ecedb0..5e04ddc18fa 100644 --- a/arch/arm/plat-omap/include/plat/display.h +++ b/arch/arm/plat-omap/include/plat/display.h @@ -58,6 +58,7 @@ enum omap_display_type { OMAP_DISPLAY_TYPE_SDI = 1 << 2, OMAP_DISPLAY_TYPE_DSI = 1 << 3, OMAP_DISPLAY_TYPE_VENC = 1 << 4, + OMAP_DISPLAY_TYPE_HDMI = 1 << 5, }; enum omap_plane { @@ -237,6 +238,13 @@ static inline int omap_display_init(struct omap_dss_board_info *board_data) } #endif +struct omap_display_platform_data { + struct omap_dss_board_info *board_data; + /* TODO: Additional members to be added when PM is considered */ + + bool (*opt_clock_available)(const char *clk_role); +}; + struct omap_video_timings { /* Unit: pixels */ u16 x_res; @@ -396,8 +404,8 @@ struct omap_dss_device { struct { u16 regn; u16 regm; - u16 regm3; - u16 regm4; + u16 regm_dispc; + u16 regm_dsi; u16 lp_clk_div; @@ -555,6 +563,9 @@ int omap_dsi_update(struct omap_dss_device *dssdev, int channel, u16 x, u16 y, u16 w, u16 h, void (*callback)(int, void *), void *data); +int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel); +int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id); +void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel); int omapdss_dsi_display_enable(struct omap_dss_device *dssdev); void omapdss_dsi_display_disable(struct omap_dss_device *dssdev); diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index d6f9fa0f62a..cac2e8ac696 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -93,7 +93,7 @@ extern void omap_gpio_restore_context(void); /* Wrappers for "new style" GPIO calls, using the new infrastructure * which lets us plug in FPGA, I2C, and other implementations. * * - * The original OMAP-specfic calls should eventually be removed. + * The original OMAP-specific calls should eventually be removed. */ #include <linux/errno.h> diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 12b31616503..1527929b445 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -90,7 +90,7 @@ enum omap_ecc { /* 1-bit ecc: stored at end of spare area */ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at begining of spare area as romcode */ + /* 1-bit ecc: stored at beginning of spare area as romcode */ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ }; diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index d7792837046..5a25098ea7e 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -416,7 +416,7 @@ /* GPMC related */ #define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END) -#define OMAP_GPMC_NR_IRQS 7 +#define OMAP_GPMC_NR_IRQS 8 #define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h index 98fc8b4a4cc..b9e85886b9d 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/plat-omap/include/plat/omap34xx.h @@ -56,8 +56,12 @@ #define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000) #define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200) #define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400) -#define OMAP3430_ISP_CSI2A_BASE (OMAP3430_ISP_BASE + 0x1800) -#define OMAP3430_ISP_CSI2PHY_BASE (OMAP3430_ISP_BASE + 0x1970) +#define OMAP3430_ISP_CSI2A_REGS1_BASE (OMAP3430_ISP_BASE + 0x1800) +#define OMAP3430_ISP_CSIPHY2_BASE (OMAP3430_ISP_BASE + 0x1970) +#define OMAP3630_ISP_CSI2A_REGS2_BASE (OMAP3430_ISP_BASE + 0x19C0) +#define OMAP3630_ISP_CSI2C_REGS1_BASE (OMAP3430_ISP_BASE + 0x1C00) +#define OMAP3630_ISP_CSIPHY1_BASE (OMAP3430_ISP_BASE + 0x1D70) +#define OMAP3630_ISP_CSI2C_REGS2_BASE (OMAP3430_ISP_BASE + 0x1DC0) #define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F) #define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077) @@ -69,8 +73,12 @@ #define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB) #define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB) #define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F) -#define OMAP3430_ISP_CSI2A_END (OMAP3430_ISP_CSI2A_BASE + 0x16F) -#define OMAP3430_ISP_CSI2PHY_END (OMAP3430_ISP_CSI2PHY_BASE + 0x007) +#define OMAP3430_ISP_CSI2A_REGS1_END (OMAP3430_ISP_CSI2A_REGS1_BASE + 0x16F) +#define OMAP3430_ISP_CSIPHY2_END (OMAP3430_ISP_CSIPHY2_BASE + 0x00B) +#define OMAP3630_ISP_CSI2A_REGS2_END (OMAP3630_ISP_CSI2A_REGS2_BASE + 0x3F) +#define OMAP3630_ISP_CSI2C_REGS1_END (OMAP3630_ISP_CSI2C_REGS1_BASE + 0x16F) +#define OMAP3630_ISP_CSIPHY1_END (OMAP3630_ISP_CSIPHY1_BASE + 0x00B) +#define OMAP3630_ISP_CSI2C_REGS2_END (OMAP3630_ISP_CSI2C_REGS2_BASE + 0x3F) #define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) #define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h index cbe897ca7f9..2858667d2e4 100644 --- a/arch/arm/plat-omap/include/plat/onenand.h +++ b/arch/arm/plat-omap/include/plat/onenand.h @@ -32,6 +32,7 @@ struct omap_onenand_platform_data { int dma_channel; u8 flags; u8 regulator_can_sleep; + u8 skip_initial_unlocking; }; #define ONENAND_MAX_PARTITIONS 8 diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 8a51fd58f65..34fc31ee908 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -793,6 +793,8 @@ static irqreturn_t iommu_fault_handler(int irq, void *data) clk_enable(obj->clk); errs = iommu_report_fault(obj, &da); clk_disable(obj->clk); + if (errs == 0) + return IRQ_HANDLED; /* Fault callback or TLB/PTE Dynamic loading */ if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv)) diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index d598d9fd65a..5587acf0eb2 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1103,7 +1103,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf) /* resend */ return -1; } else { - /* wait for recieve confirmation */ + /* wait for receive confirmation */ int attemps = 0; while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) { if (attemps++ > 1000) { diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 078894bc3b9..a431a138f40 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -324,9 +324,8 @@ EXPORT_SYMBOL(orion_gpio_set_blink); static void gpio_irq_ack(struct irq_data *d) { struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); - int type; + int type = irqd_get_trigger_type(d); - type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK; if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { int pin = d->irq - ochip->secondary_irq_base; @@ -337,11 +336,10 @@ static void gpio_irq_ack(struct irq_data *d) static void gpio_irq_mask(struct irq_data *d) { struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); - int type; + int type = irqd_get_trigger_type(d); void __iomem *reg; int pin; - type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK; if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) reg = GPIO_EDGE_MASK(ochip); else @@ -355,11 +353,10 @@ static void gpio_irq_mask(struct irq_data *d) static void gpio_irq_unmask(struct irq_data *d) { struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); - int type; + int type = irqd_get_trigger_type(d); void __iomem *reg; int pin; - type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK; if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) reg = GPIO_EDGE_MASK(ochip); else @@ -389,9 +386,9 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) * Set edge/level type. */ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - set_irq_handler(d->irq, handle_edge_irq); + __irq_set_handler_locked(d->irq, handle_edge_irq); } else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - set_irq_handler(d->irq, handle_level_irq); + __irq_set_handler_locked(d->irq, handle_level_irq); } else { printk(KERN_ERR "failed to set irq=%d (type=%d)\n", d->irq, type); @@ -477,10 +474,10 @@ void __init orion_gpio_init(int gpio_base, int ngpio, for (i = 0; i < ngpio; i++) { unsigned int irq = secondary_irq_base + i; - set_irq_chip(irq, &orion_gpio_irq_chip); - set_irq_handler(irq, handle_level_irq); - set_irq_chip_data(irq, ochip); - irq_desc[irq].status |= IRQ_LEVEL; + irq_set_chip_and_handler(irq, &orion_gpio_irq_chip, + handle_level_irq); + irq_set_chip_data(irq, ochip); + irq_set_status_flags(irq, IRQ_LEVEL); set_irq_flags(irq, IRQF_VALID); } } @@ -488,7 +485,7 @@ void __init orion_gpio_init(int gpio_base, int ngpio, void orion_gpio_irq_handler(int pinoff) { struct orion_gpio_chip *ochip; - u32 cause; + u32 cause, type; int i; ochip = orion_gpio_chip_find(pinoff); @@ -500,15 +497,14 @@ void orion_gpio_irq_handler(int pinoff) for (i = 0; i < ochip->chip.ngpio; i++) { int irq; - struct irq_desc *desc; irq = ochip->secondary_irq_base + i; if (!(cause & (1 << i))) continue; - desc = irq_desc + irq; - if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { + type = irqd_get_trigger_type(irq_get_irq_data(irq)); + if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { /* Swap polarity (race with GPIO line) */ u32 polarity; @@ -516,7 +512,6 @@ void orion_gpio_irq_handler(int pinoff) polarity ^= 1 << i; writel(polarity, GPIO_IN_POL(ochip)); } - - desc_handle_irq(irq, desc); + generic_handle_irq(irq); } } diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 7d0c7eb59f0..d8d638e09f8 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -56,10 +56,10 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) for (i = 0; i < 32; i++) { unsigned int irq = irq_start + i; - set_irq_chip(irq, &orion_irq_chip); - set_irq_chip_data(irq, maskaddr); - set_irq_handler(irq, handle_level_irq); - irq_desc[irq].status |= IRQ_LEVEL; + irq_set_chip_and_handler(irq, &orion_irq_chip, + handle_level_irq); + irq_set_chip_data(irq, maskaddr); + irq_set_status_flags(irq, IRQ_LEVEL); set_irq_flags(irq, IRQF_VALID); } } diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index e7de6ae2a1e..dce088f4567 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -284,13 +284,13 @@ void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn) } for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) { - set_irq_chip(irq, &pxa_muxed_gpio_chip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, + handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } /* Install handler for GPIO>=2 edge detect interrupts */ - set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler); + irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler); pxa_muxed_gpio_chip.irq_set_wake = fn; } diff --git a/arch/arm/plat-pxa/include/plat/i2c.h b/arch/arm/plat-pxa/include/plat/i2c.h deleted file mode 100644 index 1a9f65e6ec0..00000000000 --- a/arch/arm/plat-pxa/include/plat/i2c.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * i2c_pxa.h - * - * Copyright (C) 2002 Intrinsyc Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef _I2C_PXA_H_ -#define _I2C_PXA_H_ - -#if 0 -#define DEF_TIMEOUT 3 -#else -/* need a longer timeout if we're dealing with the fact we may well be - * looking at a multi-master environment -*/ -#define DEF_TIMEOUT 32 -#endif - -#define BUS_ERROR (-EREMOTEIO) -#define XFER_NAKED (-ECONNREFUSED) -#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ - -/* ICR initialize bit values -* -* 15. FM 0 (100 Khz operation) -* 14. UR 0 (No unit reset) -* 13. SADIE 0 (Disables the unit from interrupting on slave addresses -* matching its slave address) -* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration -* in master mode) -* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) -* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) -* 9. IRFIE 1 (Enable interrupts from full buffer received) -* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) -* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) -* 6. IUE 0 (Disable unit until we change settings) -* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) -* 4. MA 0 (Only send stop with the ICR stop bit) -* 3. TB 0 (We are not transmitting a byte initially) -* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) -* 1. STOP 0 (Do not send a STOP) -* 0. START 0 (Do not send a START) -* -*/ -#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) - -/* I2C status register init values - * - * 10. BED 1 (Clear bus error detected) - * 9. SAD 1 (Clear slave address detected) - * 7. IRF 1 (Clear IDBR Receive Full) - * 6. ITE 1 (Clear IDBR Transmit Empty) - * 5. ALD 1 (Clear Arbitration Loss Detected) - * 4. SSD 1 (Clear Slave Stop Detected) - */ -#define I2C_ISR_INIT 0x7FF /* status register init */ - -struct i2c_slave_client; - -struct i2c_pxa_platform_data { - unsigned int slave_addr; - struct i2c_slave_client *slave; - unsigned int class; - unsigned int use_pio :1; - unsigned int fast_mode :1; -}; - -extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); - -#ifdef CONFIG_PXA27x -extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info); -#endif - -#ifdef CONFIG_PXA3xx -extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info); -#endif - -#endif diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 75f65647124..89e68e07b0a 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -434,7 +434,7 @@ typedef unsigned long mfp_cfg_t; * * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which * represents a range of MFP pins from "start" to "end", with the offset - * begining at "offset", to define a single pin, let "end" = -1. + * beginning at "offset", to define a single pin, let "end" = -1. * * use * diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h index 01a8448e471..442301fe48b 100644 --- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h +++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h @@ -30,6 +30,7 @@ struct pxa3xx_nand_cmdset { }; struct pxa3xx_nand_flash { + char *name; uint32_t chip_id; unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */ unsigned int page_size; /* Page size in bytes (PAGE_SZ) */ @@ -37,7 +38,6 @@ struct pxa3xx_nand_flash { unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */ unsigned int num_blocks; /* Number of physical blocks in Flash */ - struct pxa3xx_nand_cmdset *cmdset; /* NAND command set */ struct pxa3xx_nand_timing *timing; /* NAND Flash timing */ }; diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index c2064c30871..0291bd6e236 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o -# Architecture dependant builds +# Architecture dependent builds obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index eea75ff81d1..b3d3d027899 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -455,7 +455,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy) /* whilst we will be called later on, we try and re-set the * cpu frequencies as soon as possible so that we do not end - * up resuming devices and then immediatley having to re-set + * up resuming devices and then immediately having to re-set * a number of settings once these devices have restarted. * * as a note, it is expected devices are not used until they diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 6ad274e7593..27ea852e337 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -557,7 +557,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) break; case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* I belive in this case we do not have anything to do + /* I believe in this case we do not have anything to do * until the next buffer comes along, and we turn off the * reload */ return; diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 4434cb56bd9..9aee7e1668b 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -592,8 +592,8 @@ void __init s3c24xx_init_irq(void) case IRQ_UART1: case IRQ_UART2: case IRQ_ADCPARENT: - set_irq_chip(irqno, &s3c_irq_level_chip); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &s3c_irq_level_chip, + handle_level_irq); break; case IRQ_RESERVED6: @@ -603,35 +603,35 @@ void __init s3c24xx_init_irq(void) default: //irqdbf("registering irq %d (s3c irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_chip); - set_irq_handler(irqno, handle_edge_irq); + irq_set_chip_and_handler(irqno, &s3c_irq_chip, + handle_edge_irq); set_irq_flags(irqno, IRQF_VALID); } } /* setup the cascade irq handlers */ - set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7); - set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8); + irq_set_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7); + irq_set_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8); - set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); - set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); - set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2); - set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc); + irq_set_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); + irq_set_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); + irq_set_chained_handler(IRQ_UART2, s3c_irq_demux_uart2); + irq_set_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc); /* external interrupts */ for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { irqdbf("registering irq %d (ext int)\n", irqno); - set_irq_chip(irqno, &s3c_irq_eint0t4); - set_irq_handler(irqno, handle_edge_irq); + irq_set_chip_and_handler(irqno, &s3c_irq_eint0t4, + handle_edge_irq); set_irq_flags(irqno, IRQF_VALID); } for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) { irqdbf("registering irq %d (extended s3c irq)\n", irqno); - set_irq_chip(irqno, &s3c_irqext_chip); - set_irq_handler(irqno, handle_edge_irq); + irq_set_chip_and_handler(irqno, &s3c_irqext_chip, + handle_edge_irq); set_irq_flags(irqno, IRQF_VALID); } @@ -641,29 +641,28 @@ void __init s3c24xx_init_irq(void) for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) { irqdbf("registering irq %d (s3c uart0 irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_uart0); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &s3c_irq_uart0, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) { irqdbf("registering irq %d (s3c uart1 irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_uart1); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &s3c_irq_uart1, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) { irqdbf("registering irq %d (s3c uart2 irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_uart2); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &s3c_irq_uart2, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) { irqdbf("registering irq %d (s3c adc irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_adc); - set_irq_handler(irqno, handle_edge_irq); + irq_set_chip_and_handler(irqno, &s3c_irq_adc, handle_edge_irq); set_irq_flags(irqno, IRQF_VALID); } diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index c3bfe9b13ac..5cf5e721e6c 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -39,7 +39,7 @@ static const char name_exynos4210[] = "EXYNOS4210"; static struct cpu_table cpu_ids[] __initdata = { { .idcode = 0x56440100, - .idmask = 0xffffff00, + .idmask = 0xfffff000, .map_io = s5p6440_map_io, .init_clocks = s5p6440_init_clocks, .init_uarts = s5p6440_init_uarts, @@ -47,7 +47,7 @@ static struct cpu_table cpu_ids[] __initdata = { .name = name_s5p6440, }, { .idcode = 0x36442000, - .idmask = 0xffffff00, + .idmask = 0xfffff000, .map_io = s5p6442_map_io, .init_clocks = s5p6442_init_clocks, .init_uarts = s5p6442_init_uarts, @@ -55,7 +55,7 @@ static struct cpu_table cpu_ids[] __initdata = { .name = name_s5p6442, }, { .idcode = 0x36450000, - .idmask = 0xffffff00, + .idmask = 0xfffff000, .map_io = s5p6450_map_io, .init_clocks = s5p6450_init_clocks, .init_uarts = s5p6450_init_uarts, @@ -79,7 +79,7 @@ static struct cpu_table cpu_ids[] __initdata = { .name = name_s5pv210, }, { .idcode = 0x43210000, - .idmask = 0xfffff000, + .idmask = 0xfffe0000, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c index 225aa25405d..b5bb774985b 100644 --- a/arch/arm/plat-s5p/irq-eint.c +++ b/arch/arm/plat-s5p/irq-eint.c @@ -205,15 +205,14 @@ int __init s5p_init_irq_eint(void) int irq; for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++) - set_irq_chip(irq, &s5p_irq_vic_eint); + irq_set_chip(irq, &s5p_irq_vic_eint); for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) { - set_irq_chip(irq, &s5p_irq_eint); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &s5p_irq_eint, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } - set_irq_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31); + irq_set_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31); return 0; } diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index cd87d3256e0..cd6d67c8382 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -43,13 +43,13 @@ LIST_HEAD(banks); static int s5p_gpioint_get_offset(struct irq_data *data) { - struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); + struct s3c_gpio_chip *chip = irq_data_get_irq_handler_data(data); return data->irq - chip->irq_base; } static void s5p_gpioint_ack(struct irq_data *data) { - struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); + struct s3c_gpio_chip *chip = irq_data_get_irq_handler_data(data); int group, offset, pend_offset; unsigned int value; @@ -64,7 +64,7 @@ static void s5p_gpioint_ack(struct irq_data *data) static void s5p_gpioint_mask(struct irq_data *data) { - struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); + struct s3c_gpio_chip *chip = irq_data_get_irq_handler_data(data); int group, offset, mask_offset; unsigned int value; @@ -79,7 +79,7 @@ static void s5p_gpioint_mask(struct irq_data *data) static void s5p_gpioint_unmask(struct irq_data *data) { - struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); + struct s3c_gpio_chip *chip = irq_data_get_irq_handler_data(data); int group, offset, mask_offset; unsigned int value; @@ -100,7 +100,7 @@ static void s5p_gpioint_mask_ack(struct irq_data *data) static int s5p_gpioint_set_type(struct irq_data *data, unsigned int type) { - struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); + struct s3c_gpio_chip *chip = irq_data_get_irq_handler_data(data); int group, offset, con_offset; unsigned int value; @@ -149,7 +149,7 @@ static struct irq_chip s5p_gpioint = { static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) { - struct s5p_gpioint_bank *bank = get_irq_data(irq); + struct s5p_gpioint_bank *bank = irq_get_handler_data(irq); int group, pend_offset, mask_offset; unsigned int pend, mask; @@ -200,15 +200,15 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) if (!bank->chips) return -ENOMEM; - set_irq_chained_handler(bank->irq, s5p_gpioint_handler); - set_irq_data(bank->irq, bank); + irq_set_chained_handler(bank->irq, s5p_gpioint_handler); + irq_set_handler_data(bank->irq, bank); bank->handler = s5p_gpioint_handler; printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n", bank->irq); } /* - * chained GPIO irq has been sucessfully registered, allocate new gpio + * chained GPIO irq has been successfully registered, allocate new gpio * int group and assign irq nubmers */ @@ -219,9 +219,9 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) bank->chips[group - bank->start] = chip; for (i = 0; i < chip->chip.ngpio; i++) { irq = chip->irq_base + i; - set_irq_chip(irq, &s5p_gpioint); - set_irq_data(irq, chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip(irq, &s5p_gpioint); + irq_set_handler_data(irq, chip); + irq_set_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } return 0; diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c index d592b6304b4..d15dc47b0e3 100644 --- a/arch/arm/plat-s5p/pm.c +++ b/arch/arm/plat-s5p/pm.c @@ -19,17 +19,6 @@ #define PFX "s5p pm: " -/* s3c_pm_check_resume_pin - * - * check to see if the pin is configured correctly for sleep mode, and - * make any necessary adjustments if it is not -*/ - -static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) -{ - /* nothing here yet */ -} - /* s3c_pm_configure_extint * * configure all external interrupt pins diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 9a82b887491..983c578b827 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -21,7 +21,7 @@ struct clk; * @set_parent: set the clock's parent, see clk_set_parent(). * * Group the common clock implementations together so that we - * don't have to keep setting the same fiels again. We leave + * don't have to keep setting the same fields again. We leave * enable in struct clk. * * Adding an extra layer of indirection into the process should diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 5603db0b79b..3ad8386599c 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -114,7 +114,7 @@ extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, * of control per GPIO, generally in the form of: * 0000 = Input * 0001 = Output - * others = Special functions (dependant on bank) + * others = Special functions (dependent on bank) * * Note, since the code to deal with the case where there are two control * registers instead of one, we do not have a separate set of functions for diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 5e04fa6eda7..1762dcb4cb9 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -125,7 +125,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * * These values control the state of the weak pull-{up,down} resistors * available on most pins on the S3C series. Not all chips support both - * up or down settings, and it may be dependant on the chip that is being + * up or down settings, and it may be dependent on the chip that is being * used to whether the particular mode is available. */ #define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) @@ -138,7 +138,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * @pull: The configuration for the pull resistor. * * This function sets the state of the pull-{up,down} resistor for the - * specified pin. It will return 0 if successfull, or a negative error + * specified pin. It will return 0 if successful, or a negative error * code if the pin cannot support the requested pull setting. * * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. @@ -202,7 +202,7 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); * @drvstr: The new value of the driver strength * * This function sets the driver strength value for the specified pin. - * It will return 0 if successfull, or a negative error code if the pin + * It will return 0 if successful, or a negative error code if the pin * cannot support the requested setting. */ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index dac35d0a711..8cad4cf19c3 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -108,7 +108,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * of control per GPIO, generally in the form of: * 0000 = Input * 0001 = Output - * others = Special functions (dependant on bank) + * others = Special functions (dependent on bank) * * Note, since the code to deal with the case where there are two control * registers instead of one, we do not have a separate set of function diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index b0bdf16549d..058e09654fe 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -57,7 +57,7 @@ enum clk_types { * @cfg_gpio: Configure the GPIO for a specific card bit-width * @cfg_card: Configure the interface for a specific card and speed. This * is necessary the controllers and/or GPIO blocks require the - * changing of driver-strength and other controls dependant on + * changing of driver-strength and other controls dependent on * the card and speed of operation. * * Initialisation data specific to either the machine or the platform @@ -108,7 +108,7 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; -/* Helper function availablity */ +/* Helper function availability */ extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w); diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 6790edfaca6..79d10fca909 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -36,7 +36,7 @@ static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode, unsigned int count) { for (; count != 0; count--, tab++) { - if ((idcode & tab->idmask) == tab->idcode) + if ((idcode & tab->idmask) == (tab->idcode & tab->idmask)) return tab; } diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 4e770355ccb..4d4e571af55 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -107,7 +107,6 @@ static struct irq_chip s3c_irq_uart = { static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) { - struct irq_desc *desc = irq_to_desc(uirq->parent_irq); void __iomem *reg_base = uirq->regs; unsigned int irq; int offs; @@ -118,14 +117,13 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) for (offs = 0; offs < 3; offs++) { irq = uirq->base_irq + offs; - set_irq_chip(irq, &s3c_irq_uart); - set_irq_chip_data(irq, uirq); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &s3c_irq_uart, handle_level_irq); + irq_set_chip_data(irq, uirq); set_irq_flags(irq, IRQF_VALID); } - desc->irq_data.handler_data = uirq; - set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); + irq_set_handler_data(uirq->parent_irq, uirq); + irq_set_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); } /** diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index dd8692ae5c4..d6ad66ab929 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -77,14 +77,11 @@ static struct irq_chip s3c_irq_timer = { void __init s3c_init_vic_timer_irq(unsigned int parent_irq, unsigned int timer_irq) { - struct irq_desc *desc = irq_to_desc(parent_irq); - set_irq_chained_handler(parent_irq, s3c_irq_demux_vic_timer); + irq_set_chained_handler(parent_irq, s3c_irq_demux_vic_timer); + irq_set_handler_data(parent_irq, (void *)timer_irq); - set_irq_chip(timer_irq, &s3c_irq_timer); - set_irq_chip_data(timer_irq, (void *)(1 << (timer_irq - IRQ_TIMER0))); - set_irq_handler(timer_irq, handle_level_irq); + irq_set_chip_and_handler(timer_irq, &s3c_irq_timer, handle_level_irq); + irq_set_chip_data(timer_irq, (void *)(1 << (timer_irq - IRQ_TIMER0))); set_irq_flags(timer_irq, IRQF_VALID); - - desc->irq_data.handler_data = (void *)timer_irq; } diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index e4baf76f374..6b733fafe7c 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -164,7 +164,6 @@ static inline int in_region(void *ptr, int size, void *what, size_t whatsz) */ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) { - void *save_at = phys_to_virt(s3c_sleep_save_phys); unsigned long addr; unsigned long left; void *stkpage; @@ -192,11 +191,6 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) goto skip_check; } - if (in_region(ptr, left, save_at, 32*4 )) { - S3C_PMDBG("skipping %08lx, has save block in\n", addr); - goto skip_check; - } - /* calculate and check the checksum */ calc = crc32_le(~0, ptr, left); diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index d5b58d31903..5c0a440d6e1 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -214,8 +214,9 @@ void s3c_pm_do_restore_core(struct sleep_save *ptr, int count) * * print any IRQs asserted at resume time (ie, we woke from) */ -static void s3c_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask) +static void __maybe_unused s3c_pm_show_resume_irqs(int start, + unsigned long which, + unsigned long mask) { int i; diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c index b4ff8d74ac4..f85638c6f5a 100644 --- a/arch/arm/plat-samsung/s3c-pl330.c +++ b/arch/arm/plat-samsung/s3c-pl330.c @@ -68,7 +68,7 @@ struct s3c_pl330_xfer { * @req: Two requests to communicate with the PL330 engine. * @callback_fn: Callback function to the client. * @rqcfg: Channel configuration for the xfers. - * @xfer_head: Pointer to the xfer to be next excecuted. + * @xfer_head: Pointer to the xfer to be next executed. * @dmac: Pointer to the DMAC that manages this channel, NULL if the * channel is available to be acquired. * @client: Client of this channel. NULL if the diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/plat-samsung/wakeup-mask.c index 2e09b6ad84c..dc814037297 100644 --- a/arch/arm/plat-samsung/wakeup-mask.c +++ b/arch/arm/plat-samsung/wakeup-mask.c @@ -22,7 +22,7 @@ void samsung_sync_wakemask(void __iomem *reg, struct samsung_wakeup_mask *mask, int nr_mask) { - struct irq_desc *desc; + struct irq_data *data; u32 val; val = __raw_readl(reg); @@ -33,10 +33,10 @@ void samsung_sync_wakemask(void __iomem *reg, continue; } - desc = irq_to_desc(mask->irq); + data = irq_get_irq_data(mask->irq); - /* bit of a liberty to read this directly from irq_desc. */ - if (desc->wake_depth > 0) + /* bit of a liberty to read this directly from irq_data. */ + if (irqd_is_wakeup_set(data)) val &= ~mask->bit; else val |= mask->bit; diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h index 2ae6606930a..fcc0d0ad4a1 100644 --- a/arch/arm/plat-spear/include/plat/clock.h +++ b/arch/arm/plat-spear/include/plat/clock.h @@ -89,7 +89,7 @@ struct rate_config { * @sibling: node for list of clocks having same parents * @private_data: clock specific private data * @node: list to maintain clocks linearly - * @cl: clocklook up assoicated with this clock + * @cl: clocklook up associated with this clock * @dent: object for debugfs */ struct clk { diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c index 78189035e7f..961fb726124 100644 --- a/arch/arm/plat-spear/shirq.c +++ b/arch/arm/plat-spear/shirq.c @@ -68,7 +68,7 @@ static struct irq_chip shirq_chip = { static void shirq_handler(unsigned irq, struct irq_desc *desc) { u32 i, val, mask; - struct spear_shirq *shirq = get_irq_data(irq); + struct spear_shirq *shirq = irq_get_handler_data(irq); desc->irq_data.chip->irq_ack(&desc->irq_data); while ((val = readl(shirq->regs.base + shirq->regs.status_reg) & @@ -105,14 +105,14 @@ int spear_shirq_register(struct spear_shirq *shirq) if (!shirq->dev_count) return -EINVAL; - set_irq_chained_handler(shirq->irq, shirq_handler); + irq_set_chained_handler(shirq->irq, shirq_handler); for (i = 0; i < shirq->dev_count; i++) { - set_irq_chip(shirq->dev_config[i].virq, &shirq_chip); - set_irq_handler(shirq->dev_config[i].virq, handle_simple_irq); + irq_set_chip_and_handler(shirq->dev_config[i].virq, + &shirq_chip, handle_simple_irq); set_irq_flags(shirq->dev_config[i].virq, IRQF_VALID); - set_irq_chip_data(shirq->dev_config[i].virq, shirq); + irq_set_chip_data(shirq->dev_config[i].virq, shirq); } - set_irq_data(shirq->irq, shirq); + irq_set_handler_data(shirq->irq, shirq); return 0; } diff --git a/arch/arm/plat-stmp3xxx/irq.c b/arch/arm/plat-stmp3xxx/irq.c index aaa168683d4..6fdf9acf82e 100644 --- a/arch/arm/plat-stmp3xxx/irq.c +++ b/arch/arm/plat-stmp3xxx/irq.c @@ -35,8 +35,7 @@ void __init stmp3xxx_init_irq(struct irq_chip *chip) /* Disable all interrupts initially */ for (i = 0; i < NR_REAL_IRQS; i++) { chip->irq_mask(irq_get_irq_data(i)); - set_irq_chip(i, chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, chip, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c index 66d5bac3ace..3def03b3217 100644 --- a/arch/arm/plat-stmp3xxx/pinmux.c +++ b/arch/arm/plat-stmp3xxx/pinmux.c @@ -489,14 +489,13 @@ static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset) static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc) { - struct stmp3xxx_pinmux_bank *pm = get_irq_data(irq); + struct stmp3xxx_pinmux_bank *pm = irq_get_handler_data(irq); int gpio_irq = pm->virq; u32 stat = __raw_readl(pm->irqstat); while (stat) { if (stat & 1) - irq_desc[gpio_irq].handle_irq(gpio_irq, - &irq_desc[gpio_irq]); + generic_handle_irq(gpio_irq); gpio_irq++; stat >>= 1; } @@ -534,15 +533,15 @@ int __init stmp3xxx_pinmux_init(int virtual_irq_start) for (virq = pm->virq; virq < pm->virq; virq++) { gpio_irq_chip.irq_mask(irq_get_irq_data(virq)); - set_irq_chip(virq, &gpio_irq_chip); - set_irq_handler(virq, handle_level_irq); + irq_set_chip_and_handler(virq, &gpio_irq_chip, + handle_level_irq); set_irq_flags(virq, IRQF_VALID); } r = gpiochip_add(&pm->chip); if (r < 0) break; - set_irq_chained_handler(pm->irq, stmp3xxx_gpio_irq); - set_irq_data(pm->irq, pm); + irq_set_chained_handler(pm->irq, stmp3xxx_gpio_irq); + irq_set_handler_data(pm->irq, pm); } return r; } diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig new file mode 100644 index 00000000000..52353beb369 --- /dev/null +++ b/arch/arm/plat-versatile/Kconfig @@ -0,0 +1,17 @@ +if PLAT_VERSATILE + +config PLAT_VERSATILE_CLCD + bool + +config PLAT_VERSATILE_FPGA_IRQ + bool + +config PLAT_VERSATILE_LEDS + def_bool y if LEDS_CLASS + depends on ARCH_REALVIEW || ARCH_VERSATILE + +config PLAT_VERSATILE_SCHED_CLOCK + def_bool y if !ARCH_INTEGRATOR_AP + select HAVE_SCHED_CLOCK + +endif diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 16dde081993..69714db47c3 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,8 +1,7 @@ obj-y := clock.o -ifneq ($(CONFIG_ARCH_INTEGRATOR),y) -obj-y += sched-clock.o -endif -ifeq ($(CONFIG_LEDS_CLASS),y) -obj-$(CONFIG_ARCH_REALVIEW) += leds.o -obj-$(CONFIG_ARCH_VERSATILE) += leds.o -endif +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o +obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o +obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o +obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o +obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/clcd.c b/arch/arm/plat-versatile/clcd.c new file mode 100644 index 00000000000..6628cc27efc --- /dev/null +++ b/arch/arm/plat-versatile/clcd.c @@ -0,0 +1,182 @@ +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> +#include <plat/clcd.h> + +static struct clcd_panel vga = { + .mode = { + .name = "VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 40, + .right_margin = 24, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .bpp = 16, +}; + +static struct clcd_panel xvga = { + .mode = { + .name = "XVGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15748, + .left_margin = 152, + .right_margin = 48, + .upper_margin = 23, + .lower_margin = 3, + .hsync_len = 104, + .vsync_len = 4, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .bpp = 16, +}; + +/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */ +static struct clcd_panel sanyo_tm38qv67a02a = { + .mode = { + .name = "Sanyo TM38QV67A02A", + .refresh = 116, + .xres = 320, + .yres = 240, + .pixclock = 100000, + .left_margin = 6, + .right_margin = 6, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 6, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +static struct clcd_panel sanyo_2_5_in = { + .mode = { + .name = "Sanyo QVGA Portrait", + .refresh = 116, + .xres = 240, + .yres = 320, + .pixclock = 100000, + .left_margin = 20, + .right_margin = 10, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 10, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */ +static struct clcd_panel epson_l2f50113t00 = { + .mode = { + .name = "Epson L2F50113T00", + .refresh = 390, + .xres = 176, + .yres = 220, + .pixclock = 62500, + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 0, + .hsync_len = 3, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +static struct clcd_panel *panels[] = { + &vga, + &xvga, + &sanyo_tm38qv67a02a, + &sanyo_2_5_in, + &epson_l2f50113t00, +}; + +struct clcd_panel *versatile_clcd_get_panel(const char *name) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(panels); i++) + if (strcmp(panels[i]->mode.name, name) == 0) + break; + + if (i < ARRAY_SIZE(panels)) + return panels[i]; + + pr_err("CLCD: couldn't get parameters for panel %s\n", name); + + return NULL; +} + +int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) +{ + dma_addr_t dma; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + pr_err("CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +void versatile_clcd_remove_dma(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c new file mode 100644 index 00000000000..f0cc8e19b09 --- /dev/null +++ b/arch/arm/plat-versatile/fpga-irq.c @@ -0,0 +1,72 @@ +/* + * Support for Versatile FPGA-based IRQ controllers + */ +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/mach/irq.h> +#include <plat/fpga-irq.h> + +#define IRQ_STATUS 0x00 +#define IRQ_RAW_STATUS 0x04 +#define IRQ_ENABLE_SET 0x08 +#define IRQ_ENABLE_CLEAR 0x0c + +static void fpga_irq_mask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << (d->irq - f->irq_start); + + writel(mask, f->base + IRQ_ENABLE_CLEAR); +} + +static void fpga_irq_unmask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << (d->irq - f->irq_start); + + writel(mask, f->base + IRQ_ENABLE_SET); +} + +static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc) +{ + struct fpga_irq_data *f = irq_desc_get_handler_data(desc); + u32 status = readl(f->base + IRQ_STATUS); + + if (status == 0) { + do_bad_IRQ(irq, desc); + return; + } + + do { + irq = ffs(status) - 1; + status &= ~(1 << irq); + + generic_handle_irq(irq + f->irq_start); + } while (status); +} + +void __init fpga_irq_init(int parent_irq, u32 valid, struct fpga_irq_data *f) +{ + unsigned int i; + + f->chip.irq_ack = fpga_irq_mask; + f->chip.irq_mask = fpga_irq_mask; + f->chip.irq_unmask = fpga_irq_unmask; + + if (parent_irq != -1) { + irq_set_handler_data(parent_irq, f); + irq_set_chained_handler(parent_irq, fpga_irq_handle); + } + + for (i = 0; i < 32; i++) { + if (valid & (1 << i)) { + unsigned int irq = f->irq_start + i; + + irq_set_chip_data(irq, f); + irq_set_chip_and_handler(irq, &f->chip, + handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + } +} diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/plat-versatile/headsmp.S index 7a3f0632947..d397a1fb2f5 100644 --- a/arch/arm/mach-vexpress/headsmp.S +++ b/arch/arm/plat-versatile/headsmp.S @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-vexpress/headsmp.S + * linux/arch/arm/plat-versatile/headsmp.S * * Copyright (c) 2003 ARM Limited * All Rights Reserved @@ -14,11 +14,11 @@ __INIT /* - * Versatile Express specific entry point for secondary CPUs. This - * provides a "holding pen" into which all secondary cores are held + * Realview/Versatile Express specific entry point for secondary CPUs. + * This provides a "holding pen" into which all secondary cores are held * until we're ready for them to initialise. */ -ENTRY(vexpress_secondary_startup) +ENTRY(versatile_secondary_startup) mrc p15, 0, r0, c0, c0, 5 and r0, r0, #15 adr r4, 1f diff --git a/arch/arm/plat-versatile/include/plat/clcd.h b/arch/arm/plat-versatile/include/plat/clcd.h new file mode 100644 index 00000000000..6bb6a1d2019 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/clcd.h @@ -0,0 +1,9 @@ +#ifndef PLAT_CLCD_H +#define PLAT_CLCD_H + +struct clcd_panel *versatile_clcd_get_panel(const char *); +int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); +int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); +void versatile_clcd_remove_dma(struct clcd_fb *); + +#endif diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h new file mode 100644 index 00000000000..627fafd1e59 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/fpga-irq.h @@ -0,0 +1,12 @@ +#ifndef PLAT_FPGA_IRQ_H +#define PLAT_FPGA_IRQ_H + +struct fpga_irq_data { + void __iomem *base; + unsigned int irq_start; + struct irq_chip chip; +}; + +void fpga_irq_init(int, u32, struct fpga_irq_data *); + +#endif diff --git a/arch/arm/mach-vexpress/localtimer.c b/arch/arm/plat-versatile/localtimer.c index c0e3a59a0bf..0fb3961999b 100644 --- a/arch/arm/mach-vexpress/localtimer.c +++ b/arch/arm/plat-versatile/localtimer.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-vexpress/localtimer.c + * linux/arch/arm/plat-versatile/localtimer.c * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved @@ -19,8 +19,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c new file mode 100644 index 00000000000..ba3d471d4bc --- /dev/null +++ b/arch/arm/plat-versatile/platsmp.c @@ -0,0 +1,104 @@ +/* + * linux/arch/arm/plat-versatile/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +/* + * Write pen_release in a way that is guaranteed to be visible to all + * observers, irrespective of whether they're taking part in coherency + * or not. This is necessary for the hotplug code to work reliably. + */ +static void __cpuinit write_pen_release(int val) +{ + pen_release = val; + smp_wmb(); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_secondary_init(0); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + write_pen_release(-1); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * This is really belt and braces; we hold unintended secondary + * CPUs in the holding pen until we're ready for them. However, + * since we haven't sent them a soft interrupt, they shouldn't + * be there. + */ + write_pen_release(cpu); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + smp_cross_call(cpumask_of(cpu), 1); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 9d6feaabbe7..7ca41f0a09b 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,2745 +12,458 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Feb 7 08:59:27 2011 +# XXX: This is a cut-down version of the file; it contains only machines that +# XXX: are in mainline or have been submitted to the machine database within +# XXX: the last 12 months. If your entry is missing please email rmk at +# XXX: <linux@arm.linux.org.uk> +# +# Last update: Sun Mar 20 18:06:11 2011 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # ebsa110 ARCH_EBSA110 EBSA110 0 riscpc ARCH_RPC RISCPC 1 -nexuspci ARCH_NEXUSPCI NEXUSPCI 3 ebsa285 ARCH_EBSA285 EBSA285 4 netwinder ARCH_NETWINDER NETWINDER 5 cats ARCH_CATS CATS 6 -tbox ARCH_TBOX TBOX 7 -co285 ARCH_CO285 CO285 8 -clps7110 ARCH_CLPS7110 CLPS7110 9 -archimedes ARCH_ARC ARCHIMEDES 10 -a5k ARCH_A5K A5K 11 -etoile ARCH_ETOILE ETOILE 12 -lacie_nas ARCH_LACIE_NAS LACIE_NAS 13 -clps7500 ARCH_CLPS7500 CLPS7500 14 shark ARCH_SHARK SHARK 15 brutus SA1100_BRUTUS BRUTUS 16 personal_server ARCH_PERSONAL_SERVER PERSONAL_SERVER 17 -itsy SA1100_ITSY ITSY 18 l7200 ARCH_L7200 L7200 19 pleb SA1100_PLEB PLEB 20 integrator ARCH_INTEGRATOR INTEGRATOR 21 h3600 SA1100_H3600 H3600 22 -ixp1200 ARCH_IXP1200 IXP1200 23 p720t ARCH_P720T P720T 24 assabet SA1100_ASSABET ASSABET 25 -victor SA1100_VICTOR VICTOR 26 lart SA1100_LART LART 27 -ranger SA1100_RANGER RANGER 28 graphicsclient SA1100_GRAPHICSCLIENT GRAPHICSCLIENT 29 xp860 SA1100_XP860 XP860 30 cerf SA1100_CERF CERF 31 nanoengine SA1100_NANOENGINE NANOENGINE 32 -fpic SA1100_FPIC FPIC 33 -extenex1 SA1100_EXTENEX1 EXTENEX1 34 -sherman SA1100_SHERMAN SHERMAN 35 -accelent_sa SA1100_ACCELENT ACCELENT_SA 36 -accelent_l7200 ARCH_L7200_ACCELENT ACCELENT_L7200 37 -netport SA1100_NETPORT NETPORT 38 -pangolin SA1100_PANGOLIN PANGOLIN 39 -yopy SA1100_YOPY YOPY 40 -coolidge SA1100_COOLIDGE COOLIDGE 41 -huw_webpanel SA1100_HUW_WEBPANEL HUW_WEBPANEL 42 -spotme ARCH_SPOTME SPOTME 43 -freebird ARCH_FREEBIRD FREEBIRD 44 -ti925 ARCH_TI925 TI925 45 -riscstation ARCH_RISCSTATION RISCSTATION 46 -cavy SA1100_CAVY CAVY 47 jornada720 SA1100_JORNADA720 JORNADA720 48 -omnimeter SA1100_OMNIMETER OMNIMETER 49 edb7211 ARCH_EDB7211 EDB7211 50 -citygo SA1100_CITYGO CITYGO 51 pfs168 SA1100_PFS168 PFS168 52 -spot SA1100_SPOT SPOT 53 flexanet SA1100_FLEXANET FLEXANET 54 -webpal ARCH_WEBPAL WEBPAL 55 -linpda SA1100_LINPDA LINPDA 56 -anakin ARCH_ANAKIN ANAKIN 57 -mvi SA1100_MVI MVI 58 -jupiter SA1100_JUPITER JUPITER 59 -psionw ARCH_PSIONW PSIONW 60 -aln SA1100_ALN ALN 61 -epxa ARCH_CAMELOT CAMELOT 62 -gds2200 SA1100_GDS2200 GDS2200 63 -netbook SA1100_PSION_SERIES7 PSION_SERIES7 64 -xfile SA1100_XFILE XFILE 65 -accelent_ep9312 ARCH_ACCELENT_EP9312 ACCELENT_EP9312 66 -ic200 ARCH_IC200 IC200 67 -creditlart SA1100_CREDITLART CREDITLART 68 -htm SA1100_HTM HTM 69 -iq80310 ARCH_IQ80310 IQ80310 70 -freebot SA1100_FREEBOT FREEBOT 71 -entel ARCH_ENTEL ENTEL 72 -enp3510 ARCH_ENP3510 ENP3510 73 -trizeps SA1100_TRIZEPS TRIZEPS 74 -nesa SA1100_NESA NESA 75 -venus ARCH_VENUS VENUS 76 -tardis ARCH_TARDIS TARDIS 77 -mercury ARCH_MERCURY MERCURY 78 -empeg SA1100_EMPEG EMPEG 79 -adi_evb ARCH_I80200FCC I80200FCC 80 -itt_cpb SA1100_ITT_CPB ITT_CPB 81 -svc SA1100_SVC SVC 82 -alpha2 SA1100_ALPHA2 ALPHA2 84 -alpha1 SA1100_ALPHA1 ALPHA1 85 -netarm ARCH_NETARM NETARM 86 simpad SA1100_SIMPAD SIMPAD 87 -pda1 ARCH_PDA1 PDA1 88 lubbock ARCH_LUBBOCK LUBBOCK 89 -aniko ARCH_ANIKO ANIKO 90 clep7212 ARCH_CLEP7212 CLEP7212 91 -cs89712 ARCH_CS89712 CS89712 92 -weararm SA1100_WEARARM WEARARM 93 -possio_px SA1100_POSSIO_PX POSSIO_PX 94 -sidearm SA1100_SIDEARM SIDEARM 95 -stork SA1100_STORK STORK 96 shannon SA1100_SHANNON SHANNON 97 -ace ARCH_ACE ACE 98 -ballyarm SA1100_BALLYARM BALLYARM 99 -simputer SA1100_SIMPUTER SIMPUTER 100 -nexterm SA1100_NEXTERM NEXTERM 101 -sa1100_elf SA1100_SA1100_ELF SA1100_ELF 102 -gator SA1100_GATOR GATOR 103 -granite ARCH_GRANITE GRANITE 104 consus SA1100_CONSUS CONSUS 105 aaed2000 ARCH_AAED2000 AAED2000 106 cdb89712 ARCH_CDB89712 CDB89712 107 graphicsmaster SA1100_GRAPHICSMASTER GRAPHICSMASTER 108 adsbitsy SA1100_ADSBITSY ADSBITSY 109 pxa_idp ARCH_PXA_IDP PXA_IDP 110 -plce ARCH_PLCE PLCE 111 pt_system3 SA1100_PT_SYSTEM3 PT_SYSTEM3 112 -murphy ARCH_MEDALB MEDALB 113 -eagle ARCH_EAGLE EAGLE 114 -dsc21 ARCH_DSC21 DSC21 115 -dsc24 ARCH_DSC24 DSC24 116 -ti5472 ARCH_TI5472 TI5472 117 autcpu12 ARCH_AUTCPU12 AUTCPU12 118 -uengine ARCH_UENGINE UENGINE 119 -bluestem SA1100_BLUESTEM BLUESTEM 120 -xingu8 ARCH_XINGU8 XINGU8 121 -bushstb ARCH_BUSHSTB BUSHSTB 122 -epsilon1 SA1100_EPSILON1 EPSILON1 123 -balloon SA1100_BALLOON BALLOON 124 -puppy ARCH_PUPPY PUPPY 125 -elroy SA1100_ELROY ELROY 126 -gms720 ARCH_GMS720 GMS720 127 -s24x ARCH_S24X S24X 128 -jtel_clep7312 ARCH_JTEL_CLEP7312 JTEL_CLEP7312 129 -cx821xx ARCH_CX821XX CX821XX 130 -edb7312 ARCH_EDB7312 EDB7312 131 -bsa1110 SA1100_BSA1110 BSA1110 132 -powerpin ARCH_POWERPIN POWERPIN 133 -openarm ARCH_OPENARM OPENARM 134 -whitechapel SA1100_WHITECHAPEL WHITECHAPEL 135 h3100 SA1100_H3100 H3100 136 -h3800 SA1100_H3800 H3800 137 -blue_v1 ARCH_BLUE_V1 BLUE_V1 138 -pxa_cerf ARCH_PXA_CERF PXA_CERF 139 -arm7tevb ARCH_ARM7TEVB ARM7TEVB 140 -d7400 SA1100_D7400 D7400 141 -piranha ARCH_PIRANHA PIRANHA 142 -sbcamelot SA1100_SBCAMELOT SBCAMELOT 143 -kings SA1100_KINGS KINGS 144 -smdk2400 ARCH_SMDK2400 SMDK2400 145 collie SA1100_COLLIE COLLIE 146 -idr ARCH_IDR IDR 147 badge4 SA1100_BADGE4 BADGE4 148 -webnet ARCH_WEBNET WEBNET 149 -d7300 SA1100_D7300 D7300 150 -cep SA1100_CEP CEP 151 fortunet ARCH_FORTUNET FORTUNET 152 -vc547x ARCH_VC547X VC547X 153 -filewalker SA1100_FILEWALKER FILEWALKER 154 -netgateway SA1100_NETGATEWAY NETGATEWAY 155 -symbol2800 SA1100_SYMBOL2800 SYMBOL2800 156 -suns SA1100_SUNS SUNS 157 -frodo SA1100_FRODO FRODO 158 -ms301 SA1100_MACH_TYTE_MS301 MACH_TYTE_MS301 159 mx1ads ARCH_MX1ADS MX1ADS 160 h7201 ARCH_H7201 H7201 161 h7202 ARCH_H7202 H7202 162 -amico ARCH_AMICO AMICO 163 -iam SA1100_IAM IAM 164 -tt530 SA1100_TT530 TT530 165 -sam2400 ARCH_SAM2400 SAM2400 166 -jornada56x SA1100_JORNADA56X JORNADA56X 167 -active SA1100_ACTIVE ACTIVE 168 iq80321 ARCH_IQ80321 IQ80321 169 -wid SA1100_WID WID 170 -sabinal ARCH_SABINAL SABINAL 171 -ixp425_matacumbe ARCH_IXP425_MATACUMBE IXP425_MATACUMBE 172 -miniprint SA1100_MINIPRINT MINIPRINT 173 -adm510x ARCH_ADM510X ADM510X 174 -svs200 SA1100_SVS200 SVS200 175 -atg_tcu ARCH_ATG_TCU ATG_TCU 176 -jornada820 SA1100_JORNADA820 JORNADA820 177 -s3c44b0 ARCH_S3C44B0 S3C44B0 178 -margis2 ARCH_MARGIS2 MARGIS2 179 ks8695 ARCH_KS8695 KS8695 180 -brh ARCH_BRH BRH 181 -s3c2410 ARCH_S3C2410 S3C2410 182 -possio_px30 ARCH_POSSIO_PX30 POSSIO_PX30 183 -s3c2800 ARCH_S3C2800 S3C2800 184 -fleetwood SA1100_FLEETWOOD FLEETWOOD 185 -omaha ARCH_OMAHA OMAHA 186 -ta7 ARCH_TA7 TA7 187 -nova SA1100_NOVA NOVA 188 -hmk ARCH_HMK HMK 189 -karo ARCH_KARO KARO 190 -fester SA1100_FESTER FESTER 191 -gpi ARCH_GPI GPI 192 smdk2410 ARCH_SMDK2410 SMDK2410 193 -i519 ARCH_I519 I519 194 -nexio SA1100_NEXIO NEXIO 195 -bitbox SA1100_BITBOX BITBOX 196 -g200 SA1100_G200 G200 197 -gill SA1100_GILL GILL 198 -pxa_mercury ARCH_PXA_MERCURY PXA_MERCURY 199 ceiva ARCH_CEIVA CEIVA 200 -fret SA1100_FRET FRET 201 -emailphone SA1100_EMAILPHONE EMAILPHONE 202 -h3900 ARCH_H3900 H3900 203 -pxa1 ARCH_PXA1 PXA1 204 -koan369 SA1100_KOAN369 KOAN369 205 -cogent ARCH_COGENT COGENT 206 -esl_simputer ARCH_ESL_SIMPUTER ESL_SIMPUTER 207 -esl_simputer_clr ARCH_ESL_SIMPUTER_CLR ESL_SIMPUTER_CLR 208 -esl_simputer_bw ARCH_ESL_SIMPUTER_BW ESL_SIMPUTER_BW 209 -hhp_cradle ARCH_HHP_CRADLE HHP_CRADLE 210 -he500 ARCH_HE500 HE500 211 -inhandelf2 SA1100_INHANDELF2 INHANDELF2 212 -inhandftip SA1100_INHANDFTIP INHANDFTIP 213 -dnp1110 SA1100_DNP1110 DNP1110 214 -pnp1110 SA1100_PNP1110 PNP1110 215 -csb226 ARCH_CSB226 CSB226 216 -arnold SA1100_ARNOLD ARNOLD 217 voiceblue MACH_VOICEBLUE VOICEBLUE 218 -jz8028 ARCH_JZ8028 JZ8028 219 h5400 ARCH_H5400 H5400 220 -forte SA1100_FORTE FORTE 221 -acam SA1100_ACAM ACAM 222 -abox SA1100_ABOX ABOX 223 -atmel ARCH_ATMEL ATMEL 224 -sitsang ARCH_SITSANG SITSANG 225 -cpu1110lcdnet SA1100_CPU1110LCDNET CPU1110LCDNET 226 -mpl_vcma9 ARCH_MPL_VCMA9 MPL_VCMA9 227 -opus_a1 ARCH_OPUS_A1 OPUS_A1 228 -daytona ARCH_DAYTONA DAYTONA 229 -killbear SA1100_KILLBEAR KILLBEAR 230 -yoho ARCH_YOHO YOHO 231 -jasper ARCH_JASPER JASPER 232 -dsc25 ARCH_DSC25 DSC25 233 omap_innovator MACH_OMAP_INNOVATOR OMAP_INNOVATOR 234 -mnci ARCH_RAMSES RAMSES 235 -s28x ARCH_S28X S28X 236 -mport3 ARCH_MPORT3 MPORT3 237 -pxa_eagle250 ARCH_PXA_EAGLE250 PXA_EAGLE250 238 -pdb ARCH_PDB PDB 239 -blue_2g SA1100_BLUE_2G BLUE_2G 240 -bluearch SA1100_BLUEARCH BLUEARCH 241 ixdp2400 ARCH_IXDP2400 IXDP2400 242 ixdp2800 ARCH_IXDP2800 IXDP2800 243 -explorer SA1100_EXPLORER EXPLORER 244 ixdp425 ARCH_IXDP425 IXDP425 245 -chimp ARCH_CHIMP CHIMP 246 -stork_nest ARCH_STORK_NEST STORK_NEST 247 -stork_egg ARCH_STORK_EGG STORK_EGG 248 -wismo SA1100_WISMO WISMO 249 -ezlinx ARCH_EZLINX EZLINX 250 -at91rm9200 ARCH_AT91RM9200 AT91RM9200 251 -adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252 -neptune ARCH_NEPTUNE NEPTUNE 253 hackkit SA1100_HACKKIT HACKKIT 254 -pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255 -lavinna SA1100_LAVINNA LAVINNA 256 -pxa_uengine ARCH_PXA_UENGINE PXA_UENGINE 257 -innokom ARCH_INNOKOM INNOKOM 258 -bms ARCH_BMS BMS 259 ixcdp1100 ARCH_IXCDP1100 IXCDP1100 260 -prpmc1100 ARCH_PRPMC1100 PRPMC1100 261 at91rm9200dk ARCH_AT91RM9200DK AT91RM9200DK 262 -armstick ARCH_ARMSTICK ARMSTICK 263 -armonie ARCH_ARMONIE ARMONIE 264 -mport1 ARCH_MPORT1 MPORT1 265 -s3c5410 ARCH_S3C5410 S3C5410 266 -zcp320a ARCH_ZCP320A ZCP320A 267 -i_box ARCH_I_BOX I_BOX 268 -stlc1502 ARCH_STLC1502 STLC1502 269 -siren ARCH_SIREN SIREN 270 -greenlake ARCH_GREENLAKE GREENLAKE 271 -argus ARCH_ARGUS ARGUS 272 -combadge SA1100_COMBADGE COMBADGE 273 -rokepxa ARCH_ROKEPXA ROKEPXA 274 cintegrator ARCH_CINTEGRATOR CINTEGRATOR 275 -guidea07 ARCH_GUIDEA07 GUIDEA07 276 -tat257 ARCH_TAT257 TAT257 277 -igp2425 ARCH_IGP2425 IGP2425 278 -bluegrama ARCH_BLUEGRAMMA BLUEGRAMMA 279 -ipod ARCH_IPOD IPOD 280 -adsbitsyx ARCH_ADSBITSYX ADSBITSYX 281 -trizeps2 ARCH_TRIZEPS2 TRIZEPS2 282 viper ARCH_VIPER VIPER 283 -adsbitsyplus SA1100_ADSBITSYPLUS ADSBITSYPLUS 284 -adsagc SA1100_ADSAGC ADSAGC 285 -stp7312 ARCH_STP7312 STP7312 286 -nx_phnx MACH_NX_PHNX NX_PHNX 287 -wep_ep250 ARCH_WEP_EP250 WEP_EP250 288 -inhandelf3 ARCH_INHANDELF3 INHANDELF3 289 adi_coyote ARCH_ADI_COYOTE ADI_COYOTE 290 -iyonix ARCH_IYONIX IYONIX 291 -damicam1 ARCH_DAMICAM_SA1110 DAMICAM_SA1110 292 -meg03 ARCH_MEG03 MEG03 293 -pxa_whitechapel ARCH_PXA_WHITECHAPEL PXA_WHITECHAPEL 294 -nwsc ARCH_NWSC NWSC 295 -nwlarm ARCH_NWLARM NWLARM 296 -ixp425_mguard ARCH_IXP425_MGUARD IXP425_MGUARD 297 -pxa_netdcu4 ARCH_PXA_NETDCU4 PXA_NETDCU4 298 ixdp2401 ARCH_IXDP2401 IXDP2401 299 ixdp2801 ARCH_IXDP2801 IXDP2801 300 -zodiac ARCH_ZODIAC ZODIAC 301 -armmodul ARCH_ARMMODUL ARMMODUL 302 -ketop SA1100_KETOP KETOP 303 -av7200 ARCH_AV7200 AV7200 304 -arch_ti925 ARCH_ARCH_TI925 ARCH_TI925 305 -acq200 ARCH_ACQ200 ACQ200 306 -pt_dafit SA1100_PT_DAFIT PT_DAFIT 307 -ihba ARCH_IHBA IHBA 308 -quinque ARCH_QUINQUE QUINQUE 309 -nimbraone ARCH_NIMBRAONE NIMBRAONE 310 -nimbra29x ARCH_NIMBRA29X NIMBRA29X 311 -nimbra210 ARCH_NIMBRA210 NIMBRA210 312 -hhp_d95xx ARCH_HHP_D95XX HHP_D95XX 313 -labarm ARCH_LABARM LABARM 314 -m825xx ARCH_M825XX M825XX 315 -m7100 SA1100_M7100 M7100 316 -nipc2 ARCH_NIPC2 NIPC2 317 -fu7202 ARCH_FU7202 FU7202 318 -adsagx ARCH_ADSAGX ADSAGX 319 -pxa_pooh ARCH_PXA_POOH PXA_POOH 320 -bandon ARCH_BANDON BANDON 321 -pcm7210 ARCH_PCM7210 PCM7210 322 -nms9200 ARCH_NMS9200 NMS9200 323 -logodl ARCH_LOGODL LOGODL 324 -m7140 SA1100_M7140 M7140 325 -korebot ARCH_KOREBOT KOREBOT 326 iq31244 ARCH_IQ31244 IQ31244 327 -koan393 SA1100_KOAN393 KOAN393 328 -inhandftip3 ARCH_INHANDFTIP3 INHANDFTIP3 329 -gonzo ARCH_GONZO GONZO 330 bast ARCH_BAST BAST 331 -scanpass ARCH_SCANPASS SCANPASS 332 -ep7312_pooh ARCH_EP7312_POOH EP7312_POOH 333 -ta7s ARCH_TA7S TA7S 334 -ta7v ARCH_TA7V TA7V 335 -icarus SA1100_ICARUS ICARUS 336 -h1900 ARCH_H1900 H1900 337 -gemini SA1100_GEMINI GEMINI 338 -axim ARCH_AXIM AXIM 339 -audiotron ARCH_AUDIOTRON AUDIOTRON 340 -h2200 ARCH_H2200 H2200 341 -loox600 ARCH_LOOX600 LOOX600 342 -niop ARCH_NIOP NIOP 343 -dm310 ARCH_DM310 DM310 344 -seedpxa_c2 ARCH_SEEDPXA_C2 SEEDPXA_C2 345 -ixp4xx_mguardpci ARCH_IXP4XX_MGUARD_PCI IXP4XX_MGUARD_PCI 346 h1940 ARCH_H1940 H1940 347 -scorpio ARCH_SCORPIO SCORPIO 348 -viva ARCH_VIVA VIVA 349 -pxa_xcard ARCH_PXA_XCARD PXA_XCARD 350 -csb335 ARCH_CSB335 CSB335 351 -ixrd425 ARCH_IXRD425 IXRD425 352 -iq80315 ARCH_IQ80315 IQ80315 353 -nmp7312 ARCH_NMP7312 NMP7312 354 -cx861xx ARCH_CX861XX CX861XX 355 enp2611 ARCH_ENP2611 ENP2611 356 -xda SA1100_XDA XDA 357 -csir_ims ARCH_CSIR_IMS CSIR_IMS 358 -ixp421_dnaeeth ARCH_IXP421_DNAEETH IXP421_DNAEETH 359 -pocketserv9200 ARCH_POCKETSERV9200 POCKETSERV9200 360 -toto ARCH_TOTO TOTO 361 s3c2440 ARCH_S3C2440 S3C2440 362 -ks8695p ARCH_KS8695P KS8695P 363 -se4000 ARCH_SE4000 SE4000 364 -quadriceps ARCH_QUADRICEPS QUADRICEPS 365 -bronco ARCH_BRONCO BRONCO 366 -esl_wireless_tab ARCH_ESL_WIRELESS_TAB ESL_WIRELESS_TAB 367 -esl_sofcomp ARCH_ESL_SOFCOMP ESL_SOFCOMP 368 -s5c7375 ARCH_S5C7375 S5C7375 369 -spearhead ARCH_SPEARHEAD SPEARHEAD 370 -pantera ARCH_PANTERA PANTERA 371 -prayoglite ARCH_PRAYOGLITE PRAYOGLITE 372 gumstix ARCH_GUMSTIX GUMSTIX 373 -rcube ARCH_RCUBE RCUBE 374 -rea_olv ARCH_REA_OLV REA_OLV 375 -pxa_iphone ARCH_PXA_IPHONE PXA_IPHONE 376 -s3c3410 ARCH_S3C3410 S3C3410 377 -espd_4510b ARCH_ESPD_4510B ESPD_4510B 378 -mp1x ARCH_MP1X MP1X 379 -at91rm9200tb ARCH_AT91RM9200TB AT91RM9200TB 380 -adsvgx ARCH_ADSVGX ADSVGX 381 omap_h2 MACH_OMAP_H2 OMAP_H2 382 -pelee ARCH_PELEE PELEE 383 e740 MACH_E740 E740 384 iq80331 ARCH_IQ80331 IQ80331 385 versatile_pb ARCH_VERSATILE_PB VERSATILE_PB 387 kev7a400 MACH_KEV7A400 KEV7A400 388 lpd7a400 MACH_LPD7A400 LPD7A400 389 lpd7a404 MACH_LPD7A404 LPD7A404 390 -fujitsu_camelot ARCH_FUJITSU_CAMELOT FUJITSU_CAMELOT 391 -janus2m ARCH_JANUS2M JANUS2M 392 -embtf MACH_EMBTF EMBTF 393 -hpm MACH_HPM HPM 394 -smdk2410tk MACH_SMDK2410TK SMDK2410TK 395 -smdk2410aj MACH_SMDK2410AJ SMDK2410AJ 396 -streetracer MACH_STREETRACER STREETRACER 397 -eframe MACH_EFRAME EFRAME 398 csb337 MACH_CSB337 CSB337 399 -pxa_lark MACH_PXA_LARK PXA_LARK 400 -pxa_pnp2110 MACH_PNP2110 PNP2110 401 -tcc72x MACH_TCC72X TCC72X 402 -altair MACH_ALTAIR ALTAIR 403 -kc3 MACH_KC3 KC3 404 -sinteftd MACH_SINTEFTD SINTEFTD 405 mainstone MACH_MAINSTONE MAINSTONE 406 -aday4x MACH_ADAY4X ADAY4X 407 -lite300 MACH_LITE300 LITE300 408 -s5c7376 MACH_S5C7376 S5C7376 409 -mt02 MACH_MT02 MT02 410 -mport3s MACH_MPORT3S MPORT3S 411 -ra_alpha MACH_RA_ALPHA RA_ALPHA 412 xcep MACH_XCEP XCEP 413 arcom_vulcan MACH_ARCOM_VULCAN ARCOM_VULCAN 414 -stargate MACH_STARGATE STARGATE 415 -armadilloj MACH_ARMADILLOJ ARMADILLOJ 416 -elroy_jack MACH_ELROY_JACK ELROY_JACK 417 -backend MACH_BACKEND BACKEND 418 -s5linbox MACH_S5LINBOX S5LINBOX 419 nomadik MACH_NOMADIK NOMADIK 420 -ia_cpu_9200 MACH_IA_CPU_9200 IA_CPU_9200 421 -at91_bja1 MACH_AT91_BJA1 AT91_BJA1 422 corgi MACH_CORGI CORGI 423 poodle MACH_POODLE POODLE 424 -ten MACH_TEN TEN 425 -roverp5p MACH_ROVERP5P ROVERP5P 426 -sc2700 MACH_SC2700 SC2700 427 -ex_eagle MACH_EX_EAGLE EX_EAGLE 428 -nx_pxa12 MACH_NX_PXA12 NX_PXA12 429 -nx_pxa5 MACH_NX_PXA5 NX_PXA5 430 -blackboard2 MACH_BLACKBOARD2 BLACKBOARD2 431 -i819 MACH_I819 I819 432 -ixmb995e MACH_IXMB995E IXMB995E 433 -skyrider MACH_SKYRIDER SKYRIDER 434 -skyhawk MACH_SKYHAWK SKYHAWK 435 -enterprise MACH_ENTERPRISE ENTERPRISE 436 -dep2410 MACH_DEP2410 DEP2410 437 armcore MACH_ARMCORE ARMCORE 438 -hobbit MACH_HOBBIT HOBBIT 439 -h7210 MACH_H7210 H7210 440 -pxa_netdcu5 MACH_PXA_NETDCU5 PXA_NETDCU5 441 -acc MACH_ACC ACC 442 -esl_sarva MACH_ESL_SARVA ESL_SARVA 443 -xm250 MACH_XM250 XM250 444 -t6tc1xb MACH_T6TC1XB T6TC1XB 445 -ess710 MACH_ESS710 ESS710 446 mx31ads MACH_MX31ADS MX31ADS 447 himalaya MACH_HIMALAYA HIMALAYA 448 -bolfenk MACH_BOLFENK BOLFENK 449 -at91rm9200kr MACH_AT91RM9200KR AT91RM9200KR 450 edb9312 MACH_EDB9312 EDB9312 451 omap_generic MACH_OMAP_GENERIC OMAP_GENERIC 452 -aximx3 MACH_AXIMX3 AXIMX3 453 -eb67xdip MACH_EB67XDIP EB67XDIP 454 -webtxs MACH_WEBTXS WEBTXS 455 -hawk MACH_HAWK HAWK 456 -ccat91sbc001 MACH_CCAT91SBC001 CCAT91SBC001 457 -expresso MACH_EXPRESSO EXPRESSO 458 -h4000 MACH_H4000 H4000 459 -dino MACH_DINO DINO 460 -ml675k MACH_ML675K ML675K 461 edb9301 MACH_EDB9301 EDB9301 462 edb9315 MACH_EDB9315 EDB9315 463 -reciva_tt MACH_RECIVA_TT RECIVA_TT 464 -cstcb01 MACH_CSTCB01 CSTCB01 465 -cstcb1 MACH_CSTCB1 CSTCB1 466 -shadwell MACH_SHADWELL SHADWELL 467 -goepel263 MACH_GOEPEL263 GOEPEL263 468 -acq100 MACH_ACQ100 ACQ100 469 -mx1fs2 MACH_MX1FS2 MX1FS2 470 -hiptop_g1 MACH_HIPTOP_G1 HIPTOP_G1 471 -sparky MACH_SPARKY SPARKY 472 -ns9750 MACH_NS9750 NS9750 473 -phoenix MACH_PHOENIX PHOENIX 474 vr1000 MACH_VR1000 VR1000 475 -deisterpxa MACH_DEISTERPXA DEISTERPXA 476 -bcm1160 MACH_BCM1160 BCM1160 477 -pcm022 MACH_PCM022 PCM022 478 -adsgcx MACH_ADSGCX ADSGCX 479 -dreadnaught MACH_DREADNAUGHT DREADNAUGHT 480 -dm320 MACH_DM320 DM320 481 -markov MACH_MARKOV MARKOV 482 -cos7a400 MACH_COS7A400 COS7A400 483 -milano MACH_MILANO MILANO 484 -ue9328 MACH_UE9328 UE9328 485 -uex255 MACH_UEX255 UEX255 486 -ue2410 MACH_UE2410 UE2410 487 -a620 MACH_A620 A620 488 -ocelot MACH_OCELOT OCELOT 489 -cheetah MACH_CHEETAH CHEETAH 490 omap_perseus2 MACH_OMAP_PERSEUS2 OMAP_PERSEUS2 491 -zvue MACH_ZVUE ZVUE 492 -roverp1 MACH_ROVERP1 ROVERP1 493 -asidial2 MACH_ASIDIAL2 ASIDIAL2 494 -s3c24a0 MACH_S3C24A0 S3C24A0 495 e800 MACH_E800 E800 496 e750 MACH_E750 E750 497 -s3c5500 MACH_S3C5500 S3C5500 498 -smdk5500 MACH_SMDK5500 SMDK5500 499 -signalsync MACH_SIGNALSYNC SIGNALSYNC 500 -nbc MACH_NBC NBC 501 -kodiak MACH_KODIAK KODIAK 502 -netbookpro MACH_NETBOOKPRO NETBOOKPRO 503 -hw90200 MACH_HW90200 HW90200 504 -condor MACH_CONDOR CONDOR 505 -cup MACH_CUP CUP 506 -kite MACH_KITE KITE 507 scb9328 MACH_SCB9328 SCB9328 508 omap_h3 MACH_OMAP_H3 OMAP_H3 509 omap_h4 MACH_OMAP_H4 OMAP_H4 510 -n10 MACH_N10 N10 511 -montejade MACH_MONTAJADE MONTAJADE 512 -sg560 MACH_SG560 SG560 513 -dp1000 MACH_DP1000 DP1000 514 omap_osk MACH_OMAP_OSK OMAP_OSK 515 -rg100v3 MACH_RG100V3 RG100V3 516 -mx2ads MACH_MX2ADS MX2ADS 517 -pxa_kilo MACH_PXA_KILO PXA_KILO 518 -ixp4xx_eagle MACH_IXP4XX_EAGLE IXP4XX_EAGLE 519 tosa MACH_TOSA TOSA 520 -mb2520f MACH_MB2520F MB2520F 521 -emc1000 MACH_EMC1000 EMC1000 522 -tidsc25 MACH_TIDSC25 TIDSC25 523 -akcpmxl MACH_AKCPMXL AKCPMXL 524 -av3xx MACH_AV3XX AV3XX 525 avila MACH_AVILA AVILA 526 -pxa_mpm10 MACH_PXA_MPM10 PXA_MPM10 527 -pxa_kyanite MACH_PXA_KYANITE PXA_KYANITE 528 -sgold MACH_SGOLD SGOLD 529 -oscar MACH_OSCAR OSCAR 530 -epxa4usb2 MACH_EPXA4USB2 EPXA4USB2 531 -xsengine MACH_XSENGINE XSENGINE 532 -ip600 MACH_IP600 IP600 533 -mcan2 MACH_MCAN2 MCAN2 534 -ddi_blueridge MACH_DDI_BLUERIDGE DDI_BLUERIDGE 535 -skyminder MACH_SKYMINDER SKYMINDER 536 -lpd79520 MACH_LPD79520 LPD79520 537 edb9302 MACH_EDB9302 EDB9302 538 -hw90340 MACH_HW90340 HW90340 539 -cip_box MACH_CIP_BOX CIP_BOX 540 -ivpn MACH_IVPN IVPN 541 -rsoc2 MACH_RSOC2 RSOC2 542 husky MACH_HUSKY HUSKY 543 -boxer MACH_BOXER BOXER 544 shepherd MACH_SHEPHERD SHEPHERD 545 -aml42800aa MACH_AML42800AA AML42800AA 546 -lpc2294 MACH_LPC2294 LPC2294 548 -switchgrass MACH_SWITCHGRASS SWITCHGRASS 549 -ens_cmu MACH_ENS_CMU ENS_CMU 550 -mm6_sdb MACH_MM6_SDB MM6_SDB 551 -saturn MACH_SATURN SATURN 552 -i30030evb MACH_I30030EVB I30030EVB 553 -mxc27530evb MACH_MXC27530EVB MXC27530EVB 554 -smdk2800 MACH_SMDK2800 SMDK2800 555 -mtwilson MACH_MTWILSON MTWILSON 556 -ziti MACH_ZITI ZITI 557 -grandfather MACH_GRANDFATHER GRANDFATHER 558 -tengine MACH_TENGINE TENGINE 559 -s3c2460 MACH_S3C2460 S3C2460 560 -pdm MACH_PDM PDM 561 h4700 MACH_H4700 H4700 562 -h6300 MACH_H6300 H6300 563 -rz1700 MACH_RZ1700 RZ1700 564 -a716 MACH_A716 A716 565 -estk2440a MACH_ESTK2440A ESTK2440A 566 -atwixp425 MACH_ATWIXP425 ATWIXP425 567 -csb336 MACH_CSB336 CSB336 568 -rirm2 MACH_RIRM2 RIRM2 569 -cx23518 MACH_CX23518 CX23518 570 -cx2351x MACH_CX2351X CX2351X 571 -computime MACH_COMPUTIME COMPUTIME 572 -izarus MACH_IZARUS IZARUS 573 -pxa_rts MACH_RTS RTS 574 -se5100 MACH_SE5100 SE5100 575 -s3c2510 MACH_S3C2510 S3C2510 576 -csb437tl MACH_CSB437TL CSB437TL 577 -slauson MACH_SLAUSON SLAUSON 578 -pearlriver MACH_PEARLRIVER PEARLRIVER 579 -tdc_p210 MACH_TDC_P210 TDC_P210 580 -sg580 MACH_SG580 SG580 581 -wrsbcarm7 MACH_WRSBCARM7 WRSBCARM7 582 -ipd MACH_IPD IPD 583 -pxa_dnp2110 MACH_PXA_DNP2110 PXA_DNP2110 584 -xaeniax MACH_XAENIAX XAENIAX 585 -somn4250 MACH_SOMN4250 SOMN4250 586 -pleb2 MACH_PLEB2 PLEB2 587 -cornwallis MACH_CORNWALLIS CORNWALLIS 588 -gurney_drv MACH_GURNEY_DRV GURNEY_DRV 589 -chaffee MACH_CHAFFEE CHAFFEE 590 -rms101 MACH_RMS101 RMS101 591 rx3715 MACH_RX3715 RX3715 592 -swift MACH_SWIFT SWIFT 593 -roverp7 MACH_ROVERP7 ROVERP7 594 -pr818s MACH_PR818S PR818S 595 -trxpro MACH_TRXPRO TRXPRO 596 nslu2 MACH_NSLU2 NSLU2 597 e400 MACH_E400 E400 598 -trab MACH_TRAB TRAB 599 -cmc_pu2 MACH_CMC_PU2 CMC_PU2 600 -fulcrum MACH_FULCRUM FULCRUM 601 -netgate42x MACH_NETGATE42X NETGATE42X 602 -str710 MACH_STR710 STR710 603 ixdpg425 MACH_IXDPG425 IXDPG425 604 -tomtomgo MACH_TOMTOMGO TOMTOMGO 605 versatile_ab MACH_VERSATILE_AB VERSATILE_AB 606 edb9307 MACH_EDB9307 EDB9307 607 -sg565 MACH_SG565 SG565 608 -lpd79524 MACH_LPD79524 LPD79524 609 -lpd79525 MACH_LPD79525 LPD79525 610 -rms100 MACH_RMS100 RMS100 611 kb9200 MACH_KB9200 KB9200 612 sx1 MACH_SX1 SX1 613 -hms39c7092 MACH_HMS39C7092 HMS39C7092 614 -armadillo MACH_ARMADILLO ARMADILLO 615 -ipcu MACH_IPCU IPCU 616 -loox720 MACH_LOOX720 LOOX720 617 ixdp465 MACH_IXDP465 IXDP465 618 ixdp2351 MACH_IXDP2351 IXDP2351 619 -adsvix MACH_ADSVIX ADSVIX 620 -dm270 MACH_DM270 DM270 621 -socltplus MACH_SOCLTPLUS SOCLTPLUS 622 -ecia MACH_ECIA ECIA 623 -cm4008 MACH_CM4008 CM4008 624 -p2001 MACH_P2001 P2001 625 -twister MACH_TWISTER TWISTER 626 -mudshark MACH_MUDSHARK MUDSHARK 627 -hb2 MACH_HB2 HB2 628 iq80332 MACH_IQ80332 IQ80332 629 -sendt MACH_SENDT SENDT 630 -mx2jazz MACH_MX2JAZZ MX2JAZZ 631 -multiio MACH_MULTIIO MULTIIO 632 -hrdisplay MACH_HRDISPLAY HRDISPLAY 633 -mxc27530ads MACH_MXC27530ADS MXC27530ADS 634 -trizeps3 MACH_TRIZEPS3 TRIZEPS3 635 -zefeerdza MACH_ZEFEERDZA ZEFEERDZA 636 -zefeerdzb MACH_ZEFEERDZB ZEFEERDZB 637 -zefeerdzg MACH_ZEFEERDZG ZEFEERDZG 638 -zefeerdzn MACH_ZEFEERDZN ZEFEERDZN 639 -zefeerdzq MACH_ZEFEERDZQ ZEFEERDZQ 640 gtwx5715 MACH_GTWX5715 GTWX5715 641 -astro_jack MACH_ASTRO_JACK ASTRO_JACK 643 -tip03 MACH_TIP03 TIP03 644 -a9200ec MACH_A9200EC A9200EC 645 -pnx0105 MACH_PNX0105 PNX0105 646 -adcpoecpu MACH_ADCPOECPU ADCPOECPU 647 csb637 MACH_CSB637 CSB637 648 -mb9200 MACH_MB9200 MB9200 650 -kulun MACH_KULUN KULUN 651 -snapper MACH_SNAPPER SNAPPER 652 -optima MACH_OPTIMA OPTIMA 653 -dlhsbc MACH_DLHSBC DLHSBC 654 -x30 MACH_X30 X30 655 n30 MACH_N30 N30 656 -manga_ks8695 MACH_MANGA_KS8695 MANGA_KS8695 657 -ajax MACH_AJAX AJAX 658 nec_mp900 MACH_NEC_MP900 NEC_MP900 659 -vvtk1000 MACH_VVTK1000 VVTK1000 661 kafa MACH_KAFA KAFA 662 -vvtk3000 MACH_VVTK3000 VVTK3000 663 -pimx1 MACH_PIMX1 PIMX1 664 -ollie MACH_OLLIE OLLIE 665 -skymax MACH_SKYMAX SKYMAX 666 -jazz MACH_JAZZ JAZZ 667 -tel_t3 MACH_TEL_T3 TEL_T3 668 -aisino_fcr255 MACH_AISINO_FCR255 AISINO_FCR255 669 -btweb MACH_BTWEB BTWEB 670 -dbg_lh79520 MACH_DBG_LH79520 DBG_LH79520 671 -cm41xx MACH_CM41XX CM41XX 672 ts72xx MACH_TS72XX TS72XX 673 -nggpxa MACH_NGGPXA NGGPXA 674 -csb535 MACH_CSB535 CSB535 675 -csb536 MACH_CSB536 CSB536 676 -pxa_trakpod MACH_PXA_TRAKPOD PXA_TRAKPOD 677 -praxis MACH_PRAXIS PRAXIS 678 -lh75411 MACH_LH75411 LH75411 679 otom MACH_OTOM OTOM 680 nexcoder_2440 MACH_NEXCODER_2440 NEXCODER_2440 681 -loox410 MACH_LOOX410 LOOX410 682 -westlake MACH_WESTLAKE WESTLAKE 683 -nsb MACH_NSB NSB 684 -esl_sarva_stn MACH_ESL_SARVA_STN ESL_SARVA_STN 685 -esl_sarva_tft MACH_ESL_SARVA_TFT ESL_SARVA_TFT 686 -esl_sarva_iad MACH_ESL_SARVA_IAD ESL_SARVA_IAD 687 -esl_sarva_acc MACH_ESL_SARVA_ACC ESL_SARVA_ACC 688 -typhoon MACH_TYPHOON TYPHOON 689 -cnav MACH_CNAV CNAV 690 -a730 MACH_A730 A730 691 -netstar MACH_NETSTAR NETSTAR 692 -supercon MACH_PHASEFALE_SUPERCON PHASEFALE_SUPERCON 693 -shiva1100 MACH_SHIVA1100 SHIVA1100 694 -etexsc MACH_ETEXSC ETEXSC 695 -ixdpg465 MACH_IXDPG465 IXDPG465 696 -a9m2410 MACH_A9M2410 A9M2410 697 -a9m2440 MACH_A9M2440 A9M2440 698 -a9m9750 MACH_A9M9750 A9M9750 699 -a9m9360 MACH_A9M9360 A9M9360 700 -unc90 MACH_UNC90 UNC90 701 eco920 MACH_ECO920 ECO920 702 -satview MACH_SATVIEW SATVIEW 703 roadrunner MACH_ROADRUNNER ROADRUNNER 704 at91rm9200ek MACH_AT91RM9200EK AT91RM9200EK 705 -gp32 MACH_GP32 GP32 706 -gem MACH_GEM GEM 707 -i858 MACH_I858 I858 708 -hx2750 MACH_HX2750 HX2750 709 -mxc91131evb MACH_MXC91131EVB MXC91131EVB 710 -p700 MACH_P700 P700 711 -cpe MACH_CPE CPE 712 spitz MACH_SPITZ SPITZ 713 -nimbra340 MACH_NIMBRA340 NIMBRA340 714 -lpc22xx MACH_LPC22XX LPC22XX 715 -omap_comet3 MACH_COMET3 COMET3 716 -omap_comet4 MACH_COMET4 COMET4 717 -csb625 MACH_CSB625 CSB625 718 -fortunet2 MACH_FORTUNET2 FORTUNET2 719 -s5h2200 MACH_S5H2200 S5H2200 720 -optorm920 MACH_OPTORM920 OPTORM920 721 -adsbitsyxb MACH_ADSBITSYXB ADSBITSYXB 722 adssphere MACH_ADSSPHERE ADSSPHERE 723 -adsportal MACH_ADSPORTAL ADSPORTAL 724 -ln2410sbc MACH_LN2410SBC LN2410SBC 725 -cb3rufc MACH_CB3RUFC CB3RUFC 726 -mp2usb MACH_MP2USB MP2USB 727 -ntnp425c MACH_NTNP425C NTNP425C 728 colibri MACH_COLIBRI COLIBRI 729 -pcm7220 MACH_PCM7220 PCM7220 730 gateway7001 MACH_GATEWAY7001 GATEWAY7001 731 pcm027 MACH_PCM027 PCM027 732 -cmpxa MACH_CMPXA CMPXA 733 anubis MACH_ANUBIS ANUBIS 734 -ite8152 MACH_ITE8152 ITE8152 735 -lpc3xxx MACH_LPC3XXX LPC3XXX 736 -puppeteer MACH_PUPPETEER PUPPETEER 737 -e570 MACH_E570 E570 739 -x50 MACH_X50 X50 740 -recon MACH_RECON RECON 741 -xboardgp8 MACH_XBOARDGP8 XBOARDGP8 742 -fpic2 MACH_FPIC2 FPIC2 743 akita MACH_AKITA AKITA 744 -a81 MACH_A81 A81 745 -svm_sc25x MACH_SVM_SC25X SVM_SC25X 746 -vt020 MACH_VADATECH020 VADATECH020 747 -tli MACH_TLI TLI 748 -edb9315lc MACH_EDB9315LC EDB9315LC 749 -passec MACH_PASSEC PASSEC 750 -ds_tiger MACH_DS_TIGER DS_TIGER 751 -e310 MACH_E310 E310 752 e330 MACH_E330 E330 753 -rt3000 MACH_RT3000 RT3000 754 nokia770 MACH_NOKIA770 NOKIA770 755 -pnx0106 MACH_PNX0106 PNX0106 756 -hx21xx MACH_HX21XX HX21XX 757 -faraday MACH_FARADAY FARADAY 758 -sbc9312 MACH_SBC9312 SBC9312 759 -batman MACH_BATMAN BATMAN 760 -jpd201 MACH_JPD201 JPD201 761 -mipsa MACH_MIPSA MIPSA 762 -kacom MACH_KACOM KACOM 763 -swarcocpu MACH_SWARCOCPU SWARCOCPU 764 -swarcodsl MACH_SWARCODSL SWARCODSL 765 -blueangel MACH_BLUEANGEL BLUEANGEL 766 -hairygrama MACH_HAIRYGRAMA HAIRYGRAMA 767 -banff MACH_BANFF BANFF 768 carmeva MACH_CARMEVA CARMEVA 769 -sam255 MACH_SAM255 SAM255 770 -ppm10 MACH_PPM10 PPM10 771 edb9315a MACH_EDB9315A EDB9315A 772 -sunset MACH_SUNSET SUNSET 773 stargate2 MACH_STARGATE2 STARGATE2 774 intelmote2 MACH_INTELMOTE2 INTELMOTE2 775 trizeps4 MACH_TRIZEPS4 TRIZEPS4 776 -mainstone2 MACH_MAINSTONE2 MAINSTONE2 777 -ez_ixp42x MACH_EZ_IXP42X EZ_IXP42X 778 -tapwave_zodiac MACH_TAPWAVE_ZODIAC TAPWAVE_ZODIAC 779 -universalmeter MACH_UNIVERSALMETER UNIVERSALMETER 780 -hicoarm9 MACH_HICOARM9 HICOARM9 781 pnx4008 MACH_PNX4008 PNX4008 782 -kws6000 MACH_KWS6000 KWS6000 783 -portux920t MACH_PORTUX920T PORTUX920T 784 -ez_x5 MACH_EZ_X5 EZ_X5 785 -omap_rudolph MACH_OMAP_RUDOLPH OMAP_RUDOLPH 786 cpuat91 MACH_CPUAT91 CPUAT91 787 -rea9200 MACH_REA9200 REA9200 788 -acts_pune_sa1110 MACH_ACTS_PUNE_SA1110 ACTS_PUNE_SA1110 789 -ixp425 MACH_IXP425 IXP425 790 -i30030ads MACH_I30030ADS I30030ADS 791 -perch MACH_PERCH PERCH 792 -eis05r1 MACH_EIS05R1 EIS05R1 793 -pepperpad MACH_PEPPERPAD PEPPERPAD 794 -sb3010 MACH_SB3010 SB3010 795 -rm9200 MACH_RM9200 RM9200 796 -dma03 MACH_DMA03 DMA03 797 -road_s101 MACH_ROAD_S101 ROAD_S101 798 iq81340sc MACH_IQ81340SC IQ81340SC 799 -iq_nextgen_b MACH_IQ_NEXTGEN_B IQ_NEXTGEN_B 800 iq81340mc MACH_IQ81340MC IQ81340MC 801 -iq_nextgen_d MACH_IQ_NEXTGEN_D IQ_NEXTGEN_D 802 -iq_nextgen_e MACH_IQ_NEXTGEN_E IQ_NEXTGEN_E 803 -mallow_at91 MACH_MALLOW_AT91 MALLOW_AT91 804 -cybertracker_i MACH_CYBERTRACKER_I CYBERTRACKER_I 805 -gesbc931x MACH_GESBC931X GESBC931X 806 -centipad MACH_CENTIPAD CENTIPAD 807 -armsoc MACH_ARMSOC ARMSOC 808 -se4200 MACH_SE4200 SE4200 809 -ems197a MACH_EMS197A EMS197A 810 micro9 MACH_MICRO9 MICRO9 811 micro9l MACH_MICRO9L MICRO9L 812 -uc5471dsp MACH_UC5471DSP UC5471DSP 813 -sj5471eng MACH_SJ5471ENG SJ5471ENG 814 -none MACH_CMPXA26X CMPXA26X 815 -nc1 MACH_NC NC 816 omap_palmte MACH_OMAP_PALMTE OMAP_PALMTE 817 -ajax52x MACH_AJAX52X AJAX52X 818 -siriustar MACH_SIRIUSTAR SIRIUSTAR 819 -iodata_hdlg MACH_IODATA_HDLG IODATA_HDLG 820 -at91rm9200utl MACH_AT91RM9200UTL AT91RM9200UTL 821 -biosafe MACH_BIOSAFE BIOSAFE 822 -mp1000 MACH_MP1000 MP1000 823 -parsy MACH_PARSY PARSY 824 -ccxp270 MACH_CCXP CCXP 825 -omap_gsample MACH_OMAP_GSAMPLE OMAP_GSAMPLE 826 realview_eb MACH_REALVIEW_EB REALVIEW_EB 827 -samoa MACH_SAMOA SAMOA 828 -palmt3 MACH_PALMT3 PALMT3 829 -i878 MACH_I878 I878 830 borzoi MACH_BORZOI BORZOI 831 -gecko MACH_GECKO GECKO 832 -ds101 MACH_DS101 DS101 833 -omap_palmtt2 MACH_OMAP_PALMTT2 OMAP_PALMTT2 834 palmld MACH_PALMLD PALMLD 835 -cc9c MACH_CC9C CC9C 836 -sbc1670 MACH_SBC1670 SBC1670 837 ixdp28x5 MACH_IXDP28X5 IXDP28X5 838 omap_palmtt MACH_OMAP_PALMTT OMAP_PALMTT 839 -ml696k MACH_ML696K ML696K 840 arcom_zeus MACH_ARCOM_ZEUS ARCOM_ZEUS 841 osiris MACH_OSIRIS OSIRIS 842 -maestro MACH_MAESTRO MAESTRO 843 palmte2 MACH_PALMTE2 PALMTE2 844 -ixbbm MACH_IXBBM IXBBM 845 mx27ads MACH_MX27ADS MX27ADS 846 -ax8004 MACH_AX8004 AX8004 847 at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848 loft MACH_LOFT LOFT 849 -magpie MACH_MAGPIE MAGPIE 850 mx21ads MACH_MX21ADS MX21ADS 851 -mb87m3400 MACH_MB87M3400 MB87M3400 852 -mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853 -davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854 -htcuniversal MACH_HTCUNIVERSAL HTCUNIVERSAL 855 -tpad MACH_TPAD TPAD 856 -roverp3 MACH_ROVERP3 ROVERP3 857 -jornada928 MACH_JORNADA928 JORNADA928 858 -mv88fxx81 MACH_MV88FXX81 MV88FXX81 859 -stmp36xx MACH_STMP36XX STMP36XX 860 -sxni79524 MACH_SXNI79524 SXNI79524 861 ams_delta MACH_AMS_DELTA AMS_DELTA 862 -uranium MACH_URANIUM URANIUM 863 -ucon MACH_UCON UCON 864 nas100d MACH_NAS100D NAS100D 865 -l083 MACH_L083_1000 L083_1000 866 -ezx MACH_EZX EZX 867 -pnx5220 MACH_PNX5220 PNX5220 868 -butte MACH_BUTTE BUTTE 869 -srm2 MACH_SRM2 SRM2 870 -dsbr MACH_DSBR DSBR 871 -crystalball MACH_CRYSTALBALL CRYSTALBALL 872 -tinypxa27x MACH_TINYPXA27X TINYPXA27X 873 -herbie MACH_HERBIE HERBIE 874 magician MACH_MAGICIAN MAGICIAN 875 -cm4002 MACH_CM4002 CM4002 876 -b4 MACH_B4 B4 877 -maui MACH_MAUI MAUI 878 -cybertracker_g MACH_CYBERTRACKER_G CYBERTRACKER_G 879 nxdkn MACH_NXDKN NXDKN 880 -mio8390 MACH_MIO8390 MIO8390 881 -omi_board MACH_OMI_BOARD OMI_BOARD 882 -mx21civ MACH_MX21CIV MX21CIV 883 -mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884 palmtx MACH_PALMTX PALMTX 885 s3c2413 MACH_S3C2413 S3C2413 887 -samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888 -wg302v1 MACH_WG302V1 WG302V1 889 wg302v2 MACH_WG302V2 WG302V2 890 -eb42x MACH_EB42X EB42X 891 -iq331es MACH_IQ331ES IQ331ES 892 -cosydsp MACH_COSYDSP COSYDSP 893 -uplat7d_proto MACH_UPLAT7D UPLAT7D 894 -ptdavinci MACH_PTDAVINCI PTDAVINCI 895 -mbus MACH_MBUS MBUS 896 -nadia2vb MACH_NADIA2VB NADIA2VB 897 -r1000 MACH_R1000 R1000 898 -hw90250 MACH_HW90250 HW90250 899 omap_2430sdp MACH_OMAP_2430SDP OMAP_2430SDP 900 davinci_evm MACH_DAVINCI_EVM DAVINCI_EVM 901 -omap_tornado MACH_OMAP_TORNADO OMAP_TORNADO 902 -olocreek MACH_OLOCREEK OLOCREEK 903 palmz72 MACH_PALMZ72 PALMZ72 904 nxdb500 MACH_NXDB500 NXDB500 905 -apf9328 MACH_APF9328 APF9328 906 -omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 -omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 -treo650 MACH_TREO650 TREO650 909 -acumen MACH_ACUMEN ACUMEN 910 -xp100 MACH_XP100 XP100 911 -fs2410 MACH_FS2410 FS2410 912 -pxa270_cerf MACH_PXA270_CERF PXA270_CERF 913 -sq2ftlpalm MACH_SQ2FTLPALM SQ2FTLPALM 914 -bsemserver MACH_BSEMSERVER BSEMSERVER 915 -netclient MACH_NETCLIENT NETCLIENT 916 palmt5 MACH_PALMT5 PALMT5 917 palmtc MACH_PALMTC PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 -mxc30030evb MACH_MXC30030EVB MXC30030EVB 920 -rea_cpu2 MACH_REA_2D REA_2D 921 -eti3e524 MACH_TI3E524 TI3E524 922 ateb9200 MACH_ATEB9200 ATEB9200 923 -auckland MACH_AUCKLAND AUCKLAND 924 -ak3220m MACH_AK3320M AK3320M 925 -duramax MACH_DURAMAX DURAMAX 926 n35 MACH_N35 N35 927 -pronghorn MACH_PRONGHORN PRONGHORN 928 -fundy MACH_FUNDY FUNDY 929 logicpd_pxa270 MACH_LOGICPD_PXA270 LOGICPD_PXA270 930 -cpu777 MACH_CPU777 CPU777 931 -simicon9201 MACH_SIMICON9201 SIMICON9201 932 -leap2_hpm MACH_LEAP2_HPM LEAP2_HPM 933 -cm922txa10 MACH_CM922TXA10 CM922TXA10 934 -sandgate MACH_PXA PXA 935 -sandgate2 MACH_SANDGATE2 SANDGATE2 936 -sandgate2g MACH_SANDGATE2G SANDGATE2G 937 -sandgate2p MACH_SANDGATE2P SANDGATE2P 938 -fred_jack MACH_FRED_JACK FRED_JACK 939 -ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940 nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941 -netdcu8 MACH_NETDCU8 NETDCU8 942 -ng_fvx538 MACH_NG_FVX538 NG_FVX538 944 -ng_fvs338 MACH_NG_FVS338 NG_FVS338 945 -pnx4103 MACH_PNX4103 PNX4103 946 -hesdb MACH_HESDB HESDB 947 -xsilo MACH_XSILO XSILO 948 espresso MACH_ESPRESSO ESPRESSO 949 -emlc MACH_EMLC EMLC 950 -sisteron MACH_SISTERON SISTERON 951 rx1950 MACH_RX1950 RX1950 952 -tsc_venus MACH_TSC_VENUS TSC_VENUS 953 -ds101j MACH_DS101J DS101J 954 -mxc30030ads MACH_MXC30030ADS MXC30030ADS 955 -fujitsu_wimaxsoc MACH_FUJITSU_WIMAXSOC FUJITSU_WIMAXSOC 956 -dualpcmodem MACH_DUALPCMODEM DUALPCMODEM 957 gesbc9312 MACH_GESBC9312 GESBC9312 958 -htcapache MACH_HTCAPACHE HTCAPACHE 959 -ixdp435 MACH_IXDP435 IXDP435 960 -catprovt100 MACH_CATPROVT100 CATPROVT100 961 -picotux1xx MACH_PICOTUX1XX PICOTUX1XX 962 picotux2xx MACH_PICOTUX2XX PICOTUX2XX 963 dsmg600 MACH_DSMG600 DSMG600 964 -empc2 MACH_EMPC2 EMPC2 965 -ventura MACH_VENTURA VENTURA 966 -phidget_sbc MACH_PHIDGET_SBC PHIDGET_SBC 967 -ij3k MACH_IJ3K IJ3K 968 -pisgah MACH_PISGAH PISGAH 969 omap_fsample MACH_OMAP_FSAMPLE OMAP_FSAMPLE 970 -sg720 MACH_SG720 SG720 971 -redfox MACH_REDFOX REDFOX 972 -mysh_ep9315_1 MACH_MYSH_EP9315_1 MYSH_EP9315_1 973 -tpf106 MACH_TPF106 TPF106 974 -at91rm9200kg MACH_AT91RM9200KG AT91RM9200KG 975 -rcmt2 MACH_SLEDB SLEDB 976 -ontrack MACH_ONTRACK ONTRACK 977 -pm1200 MACH_PM1200 PM1200 978 -ess24562 MACH_ESS24XXX ESS24XXX 979 -coremp7 MACH_COREMP7 COREMP7 980 -nexcoder_6446 MACH_NEXCODER_6446 NEXCODER_6446 981 -stvc8380 MACH_STVC8380 STVC8380 982 -teklynx MACH_TEKLYNX TEKLYNX 983 -carbonado MACH_CARBONADO CARBONADO 984 -sysmos_mp730 MACH_SYSMOS_MP730 SYSMOS_MP730 985 snapper_cl15 MACH_SNAPPER_CL15 SNAPPER_CL15 986 -pgigim MACH_PGIGIM PGIGIM 987 -ptx9160p2 MACH_PTX9160P2 PTX9160P2 988 -dcore1 MACH_DCORE1 DCORE1 989 -victorpxa MACH_VICTORPXA VICTORPXA 990 -mx2dtb MACH_MX2DTB MX2DTB 991 -pxa_irex_er0100 MACH_PXA_IREX_ER0100 PXA_IREX_ER0100 992 omap_palmz71 MACH_OMAP_PALMZ71 OMAP_PALMZ71 993 -bartec_deg MACH_BARTEC_DEG BARTEC_DEG 994 -hw50251 MACH_HW50251 HW50251 995 -ibox MACH_IBOX IBOX 996 -atlaslh7a404 MACH_ATLASLH7A404 ATLASLH7A404 997 -pt2026 MACH_PT2026 PT2026 998 -htcalpine MACH_HTCALPINE HTCALPINE 999 -bartec_vtu MACH_BARTEC_VTU BARTEC_VTU 1000 -vcoreii MACH_VCOREII VCOREII 1001 -pdnb3 MACH_PDNB3 PDNB3 1002 -htcbeetles MACH_HTCBEETLES HTCBEETLES 1003 -s3c6400 MACH_S3C6400 S3C6400 1004 -s3c2443 MACH_S3C2443 S3C2443 1005 -omap_ldk MACH_OMAP_LDK OMAP_LDK 1006 -smdk2460 MACH_SMDK2460 SMDK2460 1007 -smdk2440 MACH_SMDK2440 SMDK2440 1008 smdk2412 MACH_SMDK2412 SMDK2412 1009 -webbox MACH_WEBBOX WEBBOX 1010 -cwwndp MACH_CWWNDP CWWNDP 1011 -i839 MACH_DRAGON DRAGON 1012 -opendo_cpu_board MACH_OPENDO_CPU_BOARD OPENDO_CPU_BOARD 1013 -ccm2200 MACH_CCM2200 CCM2200 1014 -etwarm MACH_ETWARM ETWARM 1015 -m93030 MACH_M93030 M93030 1016 -cc7u MACH_CC7U CC7U 1017 -mtt_ranger MACH_MTT_RANGER MTT_RANGER 1018 -nexus MACH_NEXUS NEXUS 1019 -desman MACH_DESMAN DESMAN 1020 -bkde303 MACH_BKDE303 BKDE303 1021 smdk2413 MACH_SMDK2413 SMDK2413 1022 -aml_m7200 MACH_AML_M7200 AML_M7200 1023 aml_m5900 MACH_AML_M5900 AML_M5900 1024 -sg640 MACH_SG640 SG640 1025 -edg79524 MACH_EDG79524 EDG79524 1026 -ai2410 MACH_AI2410 AI2410 1027 -ixp465 MACH_IXP465 IXP465 1028 balloon3 MACH_BALLOON3 BALLOON3 1029 -heins MACH_HEINS HEINS 1030 -mpluseva MACH_MPLUSEVA MPLUSEVA 1031 -rt042 MACH_RT042 RT042 1032 -cwiem MACH_CWIEM CWIEM 1033 -cm_x270 MACH_CM_X270 CM_X270 1034 -cm_x255 MACH_CM_X255 CM_X255 1035 -esh_at91 MACH_ESH_AT91 ESH_AT91 1036 -sandgate3 MACH_SANDGATE3 SANDGATE3 1037 -primo MACH_PRIMO PRIMO 1038 -gemstone MACH_GEMSTONE GEMSTONE 1039 -pronghorn_metro MACH_PRONGHORNMETRO PRONGHORNMETRO 1040 -sidewinder MACH_SIDEWINDER SIDEWINDER 1041 -picomod1 MACH_PICOMOD1 PICOMOD1 1042 -sg590 MACH_SG590 SG590 1043 -akai9307 MACH_AKAI9307 AKAI9307 1044 -fontaine MACH_FONTAINE FONTAINE 1045 -wombat MACH_WOMBAT WOMBAT 1046 -acq300 MACH_ACQ300 ACQ300 1047 -mod272 MACH_MOD_270 MOD_270 1048 -vmc_vc0820 MACH_VC0820 VC0820 1049 -ani_aim MACH_ANI_AIM ANI_AIM 1050 -jellyfish MACH_JELLYFISH JELLYFISH 1051 -amanita MACH_AMANITA AMANITA 1052 -vlink MACH_VLINK VLINK 1053 -dexflex MACH_DEXFLEX DEXFLEX 1054 -eigen_ttq MACH_EIGEN_TTQ EIGEN_TTQ 1055 -arcom_titan MACH_ARCOM_TITAN ARCOM_TITAN 1056 -tabla MACH_TABLA TABLA 1057 -mdirac3 MACH_MDIRAC3 MDIRAC3 1058 -mrhfbp2 MACH_MRHFBP2 MRHFBP2 1059 -at91rm9200rb MACH_AT91RM9200RB AT91RM9200RB 1060 -ani_apm MACH_ANI_APM ANI_APM 1061 -ella1 MACH_ELLA1 ELLA1 1062 -inhand_pxa27x MACH_INHAND_PXA27X INHAND_PXA27X 1063 -inhand_pxa25x MACH_INHAND_PXA25X INHAND_PXA25X 1064 -empos_xm MACH_EMPOS_XM EMPOS_XM 1065 -empos MACH_EMPOS EMPOS 1066 -empos_tiny MACH_EMPOS_TINY EMPOS_TINY 1067 -empos_sm MACH_EMPOS_SM EMPOS_SM 1068 -egret MACH_EGRET EGRET 1069 -ostrich MACH_OSTRICH OSTRICH 1070 -n50 MACH_N50 N50 1071 ecbat91 MACH_ECBAT91 ECBAT91 1072 -stareast MACH_STAREAST STAREAST 1073 -dspg_dw MACH_DSPG_DW DSPG_DW 1074 onearm MACH_ONEARM ONEARM 1075 -mrg110_6 MACH_MRG110_6 MRG110_6 1076 -wrt300nv2 MACH_WRT300NV2 WRT300NV2 1077 -xm_bulverde MACH_XM_BULVERDE XM_BULVERDE 1078 -msm6100 MACH_MSM6100 MSM6100 1079 -eti_b1 MACH_ETI_B1 ETI_B1 1080 -za9l_series MACH_ZILOG_ZA9L ZILOG_ZA9L 1081 -bit2440 MACH_BIT2440 BIT2440 1082 -nbi MACH_NBI NBI 1083 smdk2443 MACH_SMDK2443 SMDK2443 1084 -vdavinci MACH_VDAVINCI VDAVINCI 1085 -atc6 MACH_ATC6 ATC6 1086 -multmdw MACH_MULTMDW MULTMDW 1087 -mba2440 MACH_MBA2440 MBA2440 1088 -ecsd MACH_ECSD ECSD 1089 -palmz31 MACH_PALMZ31 PALMZ31 1090 fsg MACH_FSG FSG 1091 -razor101 MACH_RAZOR101 RAZOR101 1092 -opera_tdm MACH_OPERA_TDM OPERA_TDM 1093 -comcerto MACH_COMCERTO COMCERTO 1094 -tb0319 MACH_TB0319 TB0319 1095 -kws8000 MACH_KWS8000 KWS8000 1096 -b2 MACH_B2 B2 1097 -lcl54 MACH_LCL54 LCL54 1098 at91sam9260ek MACH_AT91SAM9260EK AT91SAM9260EK 1099 glantank MACH_GLANTANK GLANTANK 1100 n2100 MACH_N2100 N2100 1101 -n4100 MACH_N4100 N4100 1102 -rsc4 MACH_VERTICAL_RSC4 VERTICAL_RSC4 1103 -sg8100 MACH_SG8100 SG8100 1104 -im42xx MACH_IM42XX IM42XX 1105 -ftxx MACH_FTXX FTXX 1106 -lwfusion MACH_LWFUSION LWFUSION 1107 qt2410 MACH_QT2410 QT2410 1108 kixrp435 MACH_KIXRP435 KIXRP435 1109 -ccw9c MACH_CCW9C CCW9C 1110 -dabhs MACH_DABHS DABHS 1111 -gzmx MACH_GZMX GZMX 1112 -ipnw100ap MACH_IPNW100AP IPNW100AP 1113 cc9p9360dev MACH_CC9P9360DEV CC9P9360DEV 1114 -cc9p9750dev MACH_CC9P9750DEV CC9P9750DEV 1115 -cc9p9360val MACH_CC9P9360VAL CC9P9360VAL 1116 -cc9p9750val MACH_CC9P9750VAL CC9P9750VAL 1117 -nx70v MACH_NX70V NX70V 1118 -at91rm9200df MACH_AT91RM9200DF AT91RM9200DF 1119 -se_pilot2 MACH_SE_PILOT2 SE_PILOT2 1120 -mtcn_t800 MACH_MTCN_T800 MTCN_T800 1121 -vcmx212 MACH_VCMX212 VCMX212 1122 -lynx MACH_LYNX LYNX 1123 -at91sam9260id MACH_AT91SAM9260ID AT91SAM9260ID 1124 -hw86052 MACH_HW86052 HW86052 1125 -pilz_pmi3 MACH_PILZ_PMI3 PILZ_PMI3 1126 edb9302a MACH_EDB9302A EDB9302A 1127 edb9307a MACH_EDB9307A EDB9307A 1128 -ct_dfs MACH_CT_DFS CT_DFS 1129 -pilz_pmi4 MACH_PILZ_PMI4 PILZ_PMI4 1130 -xceednp_ixp MACH_XCEEDNP_IXP XCEEDNP_IXP 1131 -smdk2442b MACH_SMDK2442B SMDK2442B 1132 -xnode MACH_XNODE XNODE 1133 -aidx270 MACH_AIDX270 AIDX270 1134 -rema MACH_REMA REMA 1135 -bps1000 MACH_BPS1000 BPS1000 1136 -hw90350 MACH_HW90350 HW90350 1137 omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 -bluetouch MACH_BLUETOUCH BLUETOUCH 1139 vstms MACH_VSTMS VSTMS 1140 -xsbase270 MACH_XSBASE270 XSBASE270 1141 -at91sam9260ek_cn MACH_AT91SAM9260EK_CN AT91SAM9260EK_CN 1142 -adsturboxb MACH_ADSTURBOXB ADSTURBOXB 1143 -oti4110 MACH_OTI4110 OTI4110 1144 -hme_pxa MACH_HME_PXA HME_PXA 1145 -deisterdca MACH_DEISTERDCA DEISTERDCA 1146 -ces_ssem2 MACH_CES_SSEM2 CES_SSEM2 1147 -ces_mtr MACH_CES_MTR CES_MTR 1148 -tds_avng_sbc MACH_TDS_AVNG_SBC TDS_AVNG_SBC 1149 -everest MACH_EVEREST EVEREST 1150 -pnx4010 MACH_PNX4010 PNX4010 1151 -oxnas MACH_OXNAS OXNAS 1152 -fiori MACH_FIORI FIORI 1153 -ml1200 MACH_ML1200 ML1200 1154 -pecos MACH_PECOS PECOS 1155 -nb2xxx MACH_NB2XXX NB2XXX 1156 -hw6900 MACH_HW6900 HW6900 1157 -cdcs_quoll MACH_CDCS_QUOLL CDCS_QUOLL 1158 -quicksilver MACH_QUICKSILVER QUICKSILVER 1159 -uplat926 MACH_UPLAT926 UPLAT926 1160 -dep2410_dep2410 MACH_DEP2410_THOMAS DEP2410_THOMAS 1161 -dtk2410 MACH_DTK2410 DTK2410 1162 -chili MACH_CHILI CHILI 1163 -demeter MACH_DEMETER DEMETER 1164 -dionysus MACH_DIONYSUS DIONYSUS 1165 -as352x MACH_AS352X AS352X 1166 -service MACH_SERVICE SERVICE 1167 -cs_e9301 MACH_CS_E9301 CS_E9301 1168 micro9m MACH_MICRO9M MICRO9M 1169 -ia_mospck MACH_IA_MOSPCK IA_MOSPCK 1170 -ql201b MACH_QL201B QL201B 1171 -bbm MACH_BBM BBM 1174 -exxx MACH_EXXX EXXX 1175 -wma11b MACH_WMA11B WMA11B 1176 -pelco_atlas MACH_PELCO_ATLAS PELCO_ATLAS 1177 -g500 MACH_G500 G500 1178 bug MACH_BUG BUG 1179 -mx33ads MACH_MX33ADS MX33ADS 1180 -chub MACH_CHUB CHUB 1181 -neo1973_gta01 MACH_NEO1973_GTA01 NEO1973_GTA01 1182 -w90n740 MACH_W90N740 W90N740 1183 -medallion_sa2410 MACH_MEDALLION_SA2410 MEDALLION_SA2410 1184 -ia_cpu_9200_2 MACH_IA_CPU_9200_2 IA_CPU_9200_2 1185 -dimmrm9200 MACH_DIMMRM9200 DIMMRM9200 1186 -pm9261 MACH_PM9261 PM9261 1187 -ml7304 MACH_ML7304 ML7304 1189 -ucp250 MACH_UCP250 UCP250 1190 -intboard MACH_INTBOARD INTBOARD 1191 -gulfstream MACH_GULFSTREAM GULFSTREAM 1192 -labquest MACH_LABQUEST LABQUEST 1193 -vcmx313 MACH_VCMX313 VCMX313 1194 -urg200 MACH_URG200 URG200 1195 -cpux255lcdnet MACH_CPUX255LCDNET CPUX255LCDNET 1196 -netdcu9 MACH_NETDCU9 NETDCU9 1197 -netdcu10 MACH_NETDCU10 NETDCU10 1198 -dspg_dga MACH_DSPG_DGA DSPG_DGA 1199 -dspg_dvw MACH_DSPG_DVW DSPG_DVW 1200 -solos MACH_SOLOS SOLOS 1201 at91sam9263ek MACH_AT91SAM9263EK AT91SAM9263EK 1202 -osstbox MACH_OSSTBOX OSSTBOX 1203 -kbat9261 MACH_KBAT9261 KBAT9261 1204 -ct1100 MACH_CT1100 CT1100 1205 -akcppxa MACH_AKCPPXA AKCPPXA 1206 -ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207 -hitrack MACH_HITRACK HITRACK 1208 -syme1 MACH_SYME1 SYME1 1209 -syhl1 MACH_SYHL1 SYHL1 1210 -empca400 MACH_EMPCA400 EMPCA400 1211 em7210 MACH_EM7210 EM7210 1212 -htchermes MACH_HTCHERMES HTCHERMES 1213 -eti_c1 MACH_ETI_C1 ETI_C1 1214 -ac100 MACH_AC100 AC100 1216 -sneetch MACH_SNEETCH SNEETCH 1217 -studentmate MACH_STUDENTMATE STUDENTMATE 1218 -zir2410 MACH_ZIR2410 ZIR2410 1219 -zir2413 MACH_ZIR2413 ZIR2413 1220 -dlonip3 MACH_DLONIP3 DLONIP3 1221 -instream MACH_INSTREAM INSTREAM 1222 -ambarella MACH_AMBARELLA AMBARELLA 1223 -nevis MACH_NEVIS NEVIS 1224 -htc_trinity MACH_HTC_TRINITY HTC_TRINITY 1225 -ql202b MACH_QL202B QL202B 1226 vpac270 MACH_VPAC270 VPAC270 1227 -rd129 MACH_RD129 RD129 1228 -htcwizard MACH_HTCWIZARD HTCWIZARD 1229 treo680 MACH_TREO680 TREO680 1230 -tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231 zylonite MACH_ZYLONITE ZYLONITE 1233 -gene1270 MACH_GENE1270 GENE1270 1234 -zir2412 MACH_ZIR2412 ZIR2412 1235 mx31lite MACH_MX31LITE MX31LITE 1236 -t700wx MACH_T700WX T700WX 1237 -vf100 MACH_VF100 VF100 1238 -nsb2 MACH_NSB2 NSB2 1239 -nxhmi_bb MACH_NXHMI_BB NXHMI_BB 1240 -nxhmi_re MACH_NXHMI_RE NXHMI_RE 1241 -n4100pro MACH_N4100PRO N4100PRO 1242 -sam9260 MACH_SAM9260 SAM9260 1243 -omap_treo600 MACH_OMAP_TREO600 OMAP_TREO600 1244 -indy2410 MACH_INDY2410 INDY2410 1245 -nelt_a MACH_NELT_A NELT_A 1246 -n311 MACH_N311 N311 1248 -at91sam9260vgk MACH_AT91SAM9260VGK AT91SAM9260VGK 1249 -at91leppe MACH_AT91LEPPE AT91LEPPE 1250 -at91lepccn MACH_AT91LEPCCN AT91LEPCCN 1251 -apc7100 MACH_APC7100 APC7100 1252 -stargazer MACH_STARGAZER STARGAZER 1253 -sonata MACH_SONATA SONATA 1254 -schmoogie MACH_SCHMOOGIE SCHMOOGIE 1255 -aztool MACH_AZTOOL AZTOOL 1256 mioa701 MACH_MIOA701 MIOA701 1257 -sxni9260 MACH_SXNI9260 SXNI9260 1258 -mxc27520evb MACH_MXC27520EVB MXC27520EVB 1259 armadillo5x0 MACH_ARMADILLO5X0 ARMADILLO5X0 1260 -mb9260 MACH_MB9260 MB9260 1261 -mb9263 MACH_MB9263 MB9263 1262 -ipac9302 MACH_IPAC9302 IPAC9302 1263 cc9p9360js MACH_CC9P9360JS CC9P9360JS 1264 -gallium MACH_GALLIUM GALLIUM 1265 -msc2410 MACH_MSC2410 MSC2410 1266 -ghi270 MACH_GHI270 GHI270 1267 -davinci_leonardo MACH_DAVINCI_LEONARDO DAVINCI_LEONARDO 1268 -oiab MACH_OIAB OIAB 1269 smdk6400 MACH_SMDK6400 SMDK6400 1270 nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271 -greenphone MACH_GREENPHONE GREENPHONE 1272 -compex42x MACH_COMPEXWP18 COMPEXWP18 1273 -xmate MACH_XMATE XMATE 1274 -energizer MACH_ENERGIZER ENERGIZER 1275 -ime1 MACH_IME1 IME1 1276 -sweda_tms MACH_SWEDATMS SWEDATMS 1277 -ntnp435c MACH_NTNP435C NTNP435C 1278 -spectro2 MACH_SPECTRO2 SPECTRO2 1279 -h6039 MACH_H6039 H6039 1280 ep80219 MACH_EP80219 EP80219 1281 -samoa_ii MACH_SAMOA_II SAMOA_II 1282 -cwmxl MACH_CWMXL CWMXL 1283 -as9200 MACH_AS9200 AS9200 1284 -sfx1149 MACH_SFX1149 SFX1149 1285 -navi010 MACH_NAVI010 NAVI010 1286 -multmdp MACH_MULTMDP MULTMDP 1287 -scb9520 MACH_SCB9520 SCB9520 1288 -htcathena MACH_HTCATHENA HTCATHENA 1289 -xp179 MACH_XP179 XP179 1290 -h4300 MACH_H4300 H4300 1291 goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292 -mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293 -adsbitsyg5 MACH_ADSBITSYG5 ADSBITSYG5 1294 -adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295 -mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296 em_x270 MACH_EM_X270 EM_X270 1297 -tpp302 MACH_TPP302 TPP302 1298 -tpp104 MACH_TPM104 TPM104 1299 -tpm102 MACH_TPM102 TPM102 1300 -tpm109 MACH_TPM109 TPM109 1301 -fbxo1 MACH_FBXO1 FBXO1 1302 -hxd8 MACH_HXD8 HXD8 1303 neo1973_gta02 MACH_NEO1973_GTA02 NEO1973_GTA02 1304 -emtest MACH_EMTEST EMTEST 1305 -ad6900 MACH_AD6900 AD6900 1306 -europa MACH_EUROPA EUROPA 1307 -metroconnect MACH_METROCONNECT METROCONNECT 1308 -ez_s2410 MACH_EZ_S2410 EZ_S2410 1309 -ez_s2440 MACH_EZ_S2440 EZ_S2440 1310 -ez_ep9312 MACH_EZ_EP9312 EZ_EP9312 1311 -ez_ep9315 MACH_EZ_EP9315 EZ_EP9315 1312 -ez_x7 MACH_EZ_X7 EZ_X7 1313 -godotdb MACH_GODOTDB GODOTDB 1314 -mistral MACH_MISTRAL MISTRAL 1315 -msm MACH_MSM MSM 1316 -ct5910 MACH_CT5910 CT5910 1317 -ct5912 MACH_CT5912 CT5912 1318 -hynet_ine MACH_HYNET_INE HYNET_INE 1319 -hynet_app MACH_HYNET_APP HYNET_APP 1320 -msm7200 MACH_MSM7200 MSM7200 1321 -msm7600 MACH_MSM7600 MSM7600 1322 -ceb255 MACH_CEB255 CEB255 1323 -ciel MACH_CIEL CIEL 1324 -slm5650 MACH_SLM5650 SLM5650 1325 at91sam9rlek MACH_AT91SAM9RLEK AT91SAM9RLEK 1326 -comtech_router MACH_COMTECH_ROUTER COMTECH_ROUTER 1327 -sbc2410x MACH_SBC2410X SBC2410X 1328 -at4x0bd MACH_AT4X0BD AT4X0BD 1329 -cbifr MACH_CBIFR CBIFR 1330 -arcom_quantum MACH_ARCOM_QUANTUM ARCOM_QUANTUM 1331 -matrix520 MACH_MATRIX520 MATRIX520 1332 -matrix510 MACH_MATRIX510 MATRIX510 1333 -matrix500 MACH_MATRIX500 MATRIX500 1334 -m501 MACH_M501 M501 1335 -aaeon1270 MACH_AAEON1270 AAEON1270 1336 -matrix500ev MACH_MATRIX500EV MATRIX500EV 1337 -pac500 MACH_PAC500 PAC500 1338 -pnx8181 MACH_PNX8181 PNX8181 1339 colibri320 MACH_COLIBRI320 COLIBRI320 1340 -aztoolbb MACH_AZTOOLBB AZTOOLBB 1341 -aztoolg2 MACH_AZTOOLG2 AZTOOLG2 1342 -dvlhost MACH_DVLHOST DVLHOST 1343 -zir9200 MACH_ZIR9200 ZIR9200 1344 -zir9260 MACH_ZIR9260 ZIR9260 1345 -cocopah MACH_COCOPAH COCOPAH 1346 -nds MACH_NDS NDS 1347 -rosencrantz MACH_ROSENCRANTZ ROSENCRANTZ 1348 -fttx_odsc MACH_FTTX_ODSC FTTX_ODSC 1349 -classe_r6904 MACH_CLASSE_R6904 CLASSE_R6904 1350 cam60 MACH_CAM60 CAM60 1351 -mxc30031ads MACH_MXC30031ADS MXC30031ADS 1352 -datacall MACH_DATACALL DATACALL 1353 at91eb01 MACH_AT91EB01 AT91EB01 1354 -rty MACH_RTY RTY 1355 -dwl2100 MACH_DWL2100 DWL2100 1356 -vinsi MACH_VINSI VINSI 1357 db88f5281 MACH_DB88F5281 DB88F5281 1358 csb726 MACH_CSB726 CSB726 1359 -tik27 MACH_TIK27 TIK27 1360 -mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361 -rirm3 MACH_RIRM3 RIRM3 1362 -pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363 -adx_abox MACH_ADX_ABOX ADX_ABOX 1365 -adx_tpid MACH_ADX_TPID ADX_TPID 1366 -minicheck MACH_MINICHECK MINICHECK 1367 -idam MACH_IDAM IDAM 1368 -mario_mx MACH_MARIO_MX MARIO_MX 1369 -vi1888 MACH_VI1888 VI1888 1370 -zr4230 MACH_ZR4230 ZR4230 1371 -t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372 -syhq2 MACH_SYHQ2 SYHQ2 1373 -computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374 -oratis MACH_ORATIS ORATIS 1375 -mikko MACH_MIKKO MIKKO 1376 -holon MACH_HOLON HOLON 1377 -olip8 MACH_OLIP8 OLIP8 1378 -ghi270hg MACH_GHI270HG GHI270HG 1379 davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380 davinci_dm355_evm MACH_DAVINCI_DM355_EVM DAVINCI_DM355_EVM 1381 -blackriver MACH_BLACKRIVER BLACKRIVER 1383 -sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384 -cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385 -quark963 MACH_QUARK963 QUARK963 1386 -csb735 MACH_CSB735 CSB735 1387 littleton MACH_LITTLETON LITTLETON 1388 -mio_p550 MACH_MIO_P550 MIO_P550 1389 -motion2440 MACH_MOTION2440 MOTION2440 1390 -imm500 MACH_IMM500 IMM500 1391 -homematic MACH_HOMEMATIC HOMEMATIC 1392 -ermine MACH_ERMINE ERMINE 1393 -kb9202b MACH_KB9202B KB9202B 1394 -hs1xx MACH_HS1XX HS1XX 1395 -studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396 -arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397 -dep2410k MACH_DEP2410K DEP2410K 1398 -xxsvideo MACH_XXSVIDEO XXSVIDEO 1399 -im4004 MACH_IM4004 IM4004 1400 -ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401 -lep9261 MACH_LEP9261 LEP9261 1402 -svenmeb MACH_SVENMEB SVENMEB 1403 -fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404 -nxhx MACH_NXHX NXHX 1406 realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407 -ids500 MACH_IDS500 IDS500 1408 -ors_n725 MACH_ORS_N725 ORS_N725 1409 -hsdarm MACH_HSDARM HSDARM 1410 -sha_pon003 MACH_SHA_PON003 SHA_PON003 1411 -sha_pon004 MACH_SHA_PON004 SHA_PON004 1412 -sha_pon007 MACH_SHA_PON007 SHA_PON007 1413 -sha_pon011 MACH_SHA_PON011 SHA_PON011 1414 -h6042 MACH_H6042 H6042 1415 -h6043 MACH_H6043 H6043 1416 -looxc550 MACH_LOOXC550 LOOXC550 1417 -cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 -app3xx MACH_APP3XX APP3XX 1419 -sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 -treo700p MACH_TREO700P TREO700P 1421 -treo700w MACH_TREO700W TREO700W 1422 -treo750 MACH_TREO750 TREO750 1423 -treo755p MACH_TREO755P TREO755P 1424 -ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 -sarge MACH_SARGE SARGE 1426 -a696 MACH_A696 A696 1427 -turtle1916 MACH_TURTLE TURTLE 1428 mx27_3ds MACH_MX27_3DS MX27_3DS 1430 -bishop MACH_BISHOP BISHOP 1431 -pxx MACH_PXX PXX 1432 -redwood MACH_REDWOOD REDWOOD 1433 -omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436 -omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437 -sardine MACH_SARDINE SARDINE 1438 halibut MACH_HALIBUT HALIBUT 1439 trout MACH_TROUT TROUT 1440 -goldfish MACH_GOLDFISH GOLDFISH 1441 -gesbc2440 MACH_GESBC2440 GESBC2440 1442 -nomad MACH_NOMAD NOMAD 1443 -rosalind MACH_ROSALIND ROSALIND 1444 -cc9p9215 MACH_CC9P9215 CC9P9215 1445 -cc9p9210 MACH_CC9P9210 CC9P9210 1446 -cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447 -cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448 -nasffe MACH_NASFFE NASFFE 1449 -tn2x0bd MACH_TN2X0BD TN2X0BD 1450 -gwmpxa MACH_GWMPXA GWMPXA 1451 -exyplus MACH_EXYPLUS EXYPLUS 1452 -jadoo21 MACH_JADOO21 JADOO21 1453 -looxn560 MACH_LOOXN560 LOOXN560 1454 -bonsai MACH_BONSAI BONSAI 1455 -adsmilgato MACH_ADSMILGATO ADSMILGATO 1456 -gba MACH_GBA GBA 1457 -h6044 MACH_H6044 H6044 1458 -app MACH_APP APP 1459 tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460 herald MACH_HERALD HERALD 1461 -artemis MACH_ARTEMIS ARTEMIS 1462 -htctitan MACH_HTCTITAN HTCTITAN 1463 -qranium MACH_QRANIUM QRANIUM 1464 -adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465 -adx_medcom MACH_ADX_MEDCOM ADX_MEDCOM 1466 -bboard MACH_BBOARD BBOARD 1467 -cambria MACH_CAMBRIA CAMBRIA 1468 -mt7xxx MACH_MT7XXX MT7XXX 1469 -matrix512 MACH_MATRIX512 MATRIX512 1470 -matrix522 MACH_MATRIX522 MATRIX522 1471 -ipac5010 MACH_IPAC5010 IPAC5010 1472 -sakura MACH_SAKURA SAKURA 1473 -grocx MACH_GROCX GROCX 1474 -pm9263 MACH_PM9263 PM9263 1475 sim_one MACH_SIM_ONE SIM_ONE 1476 -acq132 MACH_ACQ132 ACQ132 1477 -datr MACH_DATR DATR 1478 -actux1 MACH_ACTUX1 ACTUX1 1479 -actux2 MACH_ACTUX2 ACTUX2 1480 -actux3 MACH_ACTUX3 ACTUX3 1481 -flexit MACH_FLEXIT FLEXIT 1482 -bh2x0bd MACH_BH2X0BD BH2X0BD 1483 -atb2002 MACH_ATB2002 ATB2002 1484 -xenon MACH_XENON XENON 1485 -fm607 MACH_FM607 FM607 1486 -matrix514 MACH_MATRIX514 MATRIX514 1487 -matrix524 MACH_MATRIX524 MATRIX524 1488 -inpod MACH_INPOD INPOD 1489 jive MACH_JIVE JIVE 1490 -tll_mx21 MACH_TLL_MX21 TLL_MX21 1491 -sbc2800 MACH_SBC2800 SBC2800 1492 -cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493 -ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494 -ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495 -ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496 -aml_m8000 MACH_AML_M8000 AML_M8000 1497 -snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498 -omap_bbx MACH_OMAP_BBX OMAP_BBX 1499 -ucn2410 MACH_UCN2410 UCN2410 1500 sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501 -eti_c2 MACH_ETI_C2 ETI_C2 1502 -avalanche MACH_AVALANCHE AVALANCHE 1503 realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504 -dp1500 MACH_DP1500 DP1500 1505 -apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506 yl9200 MACH_YL9200 YL9200 1507 rd88f5182 MACH_RD88F5182 RD88F5182 1508 kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509 -se_poet MACH_SE_POET SE_POET 1510 mx31_3ds MACH_MX31_3DS MX31_3DS 1511 -r270 MACH_R270 R270 1512 -armour21 MACH_ARMOUR21 ARMOUR21 1513 -dt2 MACH_DT2 DT2 1514 -vt4 MACH_VT4 VT4 1515 -tyco320 MACH_TYCO320 TYCO320 1516 -adma MACH_ADMA ADMA 1517 -wp188 MACH_WP188 WP188 1518 -corsica MACH_CORSICA CORSICA 1519 -bigeye MACH_BIGEYE BIGEYE 1520 -tll5000 MACH_TLL5000 TLL5000 1522 -bebot MACH_BEBOT BEBOT 1523 qong MACH_QONG QONG 1524 -tcompact MACH_TCOMPACT TCOMPACT 1525 -puma5 MACH_PUMA5 PUMA5 1526 -elara MACH_ELARA ELARA 1527 -ellington MACH_ELLINGTON ELLINGTON 1528 -xda_atom MACH_XDA_ATOM XDA_ATOM 1529 -energizer2 MACH_ENERGIZER2 ENERGIZER2 1530 -odin MACH_ODIN ODIN 1531 -actux4 MACH_ACTUX4 ACTUX4 1532 -esl_omap MACH_ESL_OMAP ESL_OMAP 1533 omap2evm MACH_OMAP2EVM OMAP2EVM 1534 omap3evm MACH_OMAP3EVM OMAP3EVM 1535 -adx_pcu57 MACH_ADX_PCU57 ADX_PCU57 1536 -monaco MACH_MONACO MONACO 1537 -levante MACH_LEVANTE LEVANTE 1538 -tmxipx425 MACH_TMXIPX425 TMXIPX425 1539 -leep MACH_LEEP LEEP 1540 -raad MACH_RAAD RAAD 1541 dns323 MACH_DNS323 DNS323 1542 -ap1000 MACH_AP1000 AP1000 1543 -a9sam6432 MACH_A9SAM6432 A9SAM6432 1544 -shiny MACH_SHINY SHINY 1545 omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546 -csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547 nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548 -c270 MACH_C270 C270 1549 -sentry MACH_SENTRY SENTRY 1550 pcm038 MACH_PCM038 PCM038 1551 -anc300 MACH_ANC300 ANC300 1552 -htckaiser MACH_HTCKAISER HTCKAISER 1553 -sbat100 MACH_SBAT100 SBAT100 1554 -modunorm MACH_MODUNORM MODUNORM 1555 -pelos_twarm MACH_PELOS_TWARM PELOS_TWARM 1556 -flank MACH_FLANK FLANK 1557 -sirloin MACH_SIRLOIN SIRLOIN 1558 -brisket MACH_BRISKET BRISKET 1559 -chuck MACH_CHUCK CHUCK 1560 -otter MACH_OTTER OTTER 1561 -davinci_ldk MACH_DAVINCI_LDK DAVINCI_LDK 1562 -phreedom MACH_PHREEDOM PHREEDOM 1563 -sg310 MACH_SG310 SG310 1564 ts_x09 MACH_TS209 TS209 1565 at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 -tion9315 MACH_TION9315 TION9315 1567 -mast MACH_MAST MAST 1568 -pfw MACH_PFW PFW 1569 -yl_p2440 MACH_YL_P2440 YL_P2440 1570 -zsbc32 MACH_ZSBC32 ZSBC32 1571 -omap_pace2 MACH_OMAP_PACE2 OMAP_PACE2 1572 -imx_pace2 MACH_IMX_PACE2 IMX_PACE2 1573 mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574 -mx37_3ds MACH_MX37_3DS MX37_3DS 1575 -rcc MACH_RCC RCC 1576 -dmp MACH_ARM9 ARM9 1577 -vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578 -scly1000 MACH_SCLY1000 SCLY1000 1579 -fontel_ep MACH_FONTEL_EP FONTEL_EP 1580 -voiceblue3g MACH_VOICEBLUE3G VOICEBLUE3G 1581 -tt9200 MACH_TT9200 TT9200 1582 -digi2410 MACH_DIGI2410 DIGI2410 1583 terastation_pro2 MACH_TERASTATION_PRO2 TERASTATION_PRO2 1584 linkstation_pro MACH_LINKSTATION_PRO LINKSTATION_PRO 1585 -motorola_a780 MACH_MOTOROLA_A780 MOTOROLA_A780 1587 -motorola_e6 MACH_MOTOROLA_E6 MOTOROLA_E6 1588 -motorola_e2 MACH_MOTOROLA_E2 MOTOROLA_E2 1589 -motorola_e680 MACH_MOTOROLA_E680 MOTOROLA_E680 1590 -ur2410 MACH_UR2410 UR2410 1591 -tas9261 MACH_TAS9261 TAS9261 1592 -davinci_hermes_hd MACH_HERMES_HD HERMES_HD 1593 -davinci_perseo_hd MACH_PERSEO_HD PERSEO_HD 1594 -stargazer2 MACH_STARGAZER2 STARGAZER2 1595 e350 MACH_E350 E350 1596 -wpcm450 MACH_WPCM450 WPCM450 1597 -cartesio MACH_CARTESIO CARTESIO 1598 -toybox MACH_TOYBOX TOYBOX 1599 -tx27 MACH_TX27 TX27 1600 ts409 MACH_TS409 TS409 1601 -p300 MACH_P300 P300 1602 -xdacomet MACH_XDACOMET XDACOMET 1603 -dexflex2 MACH_DEXFLEX2 DEXFLEX2 1604 -ow MACH_OW OW 1605 -armebs3 MACH_ARMEBS3 ARMEBS3 1606 -u3 MACH_U3 U3 1607 -smdk2450 MACH_SMDK2450 SMDK2450 1608 -rsi_ews MACH_RSI_EWS RSI_EWS 1609 -tnb MACH_TNB TNB 1610 -toepath MACH_TOEPATH TOEPATH 1611 -kb9263 MACH_KB9263 KB9263 1612 -mt7108 MACH_MT7108 MT7108 1613 -smtr2440 MACH_SMTR2440 SMTR2440 1614 -manao MACH_MANAO MANAO 1615 cm_x300 MACH_CM_X300 CM_X300 1616 -gulfstream_kp MACH_GULFSTREAM_KP GULFSTREAM_KP 1617 -lanreadyfn522 MACH_LANREADYFN522 LANREADYFN522 1618 -arma37 MACH_ARMA37 ARMA37 1619 -mendel MACH_MENDEL MENDEL 1620 -pelco_iliad MACH_PELCO_ILIAD PELCO_ILIAD 1621 -unit2p MACH_UNIT2P UNIT2P 1622 -inc20otter MACH_INC20OTTER INC20OTTER 1623 at91sam9g20ek MACH_AT91SAM9G20EK AT91SAM9G20EK 1624 -sc_ge2 MACH_STORCENTER STORCENTER 1625 smdk6410 MACH_SMDK6410 SMDK6410 1626 u300 MACH_U300 U300 1627 -u500 MACH_U500 U500 1628 -ds9260 MACH_DS9260 DS9260 1629 -riverrock MACH_RIVERROCK RIVERROCK 1630 -scibath MACH_SCIBATH SCIBATH 1631 -at91sam7se MACH_AT91SAM7SE512EK AT91SAM7SE512EK 1632 wrt350n_v2 MACH_WRT350N_V2 WRT350N_V2 1633 -multimedia MACH_MULTIMEDIA MULTIMEDIA 1634 -marvin MACH_MARVIN MARVIN 1635 -x500 MACH_X500 X500 1636 -awlug4lcu MACH_AWLUG4LCU AWLUG4LCU 1637 -palermoc MACH_PALERMOC PALERMOC 1638 omap_ldp MACH_OMAP_LDP OMAP_LDP 1639 -ip500 MACH_IP500 IP500 1640 -ase2 MACH_ASE2 ASE2 1642 -mx35evb MACH_MX35EVB MX35EVB 1643 -aml_m8050 MACH_AML_M8050 AML_M8050 1644 mx35_3ds MACH_MX35_3DS MX35_3DS 1645 -mars MACH_MARS MARS 1646 neuros_osd2 MACH_NEUROS_OSD2 NEUROS_OSD2 1647 -badger MACH_BADGER BADGER 1648 trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649 -trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650 -marlin MACH_MARLIN MARLIN 1651 ts78xx MACH_TS78XX TS78XX 1652 -hpipaq214 MACH_HPIPAQ214 HPIPAQ214 1653 -at572d940dcm MACH_AT572D940DCM AT572D940DCM 1654 -ne1board MACH_NE1BOARD NE1BOARD 1655 -zante MACH_ZANTE ZANTE 1656 sffsdr MACH_SFFSDR SFFSDR 1657 -tw2662 MACH_TW2662 TW2662 1658 -vf10xx MACH_VF10XX VF10XX 1659 -zoran43xx MACH_ZORAN43XX ZORAN43XX 1660 -sonix926 MACH_SONIX926 SONIX926 1661 -celestialsemi MACH_CELESTIALSEMI CELESTIALSEMI 1662 -cc9m2443js MACH_CC9M2443JS CC9M2443JS 1663 -tw5334 MACH_TW5334 TW5334 1664 -omap_htcartemis MACH_HTCARTEMIS HTCARTEMIS 1665 -nal_hlite MACH_NAL_HLITE NAL_HLITE 1666 -htcvogue MACH_HTCVOGUE HTCVOGUE 1667 -smartweb MACH_SMARTWEB SMARTWEB 1668 -mv86xx MACH_MV86XX MV86XX 1669 -mv87xx MACH_MV87XX MV87XX 1670 -songyoungho MACH_SONGYOUNGHO SONGYOUNGHO 1671 -younghotema MACH_YOUNGHOTEMA YOUNGHOTEMA 1672 pcm037 MACH_PCM037 PCM037 1673 -mmvp MACH_MMVP MMVP 1674 -mmap MACH_MMAP MMAP 1675 -ptid2410 MACH_PTID2410 PTID2410 1676 -james_926 MACH_JAMES_926 JAMES_926 1677 -fm6000 MACH_FM6000 FM6000 1678 db88f6281_bp MACH_DB88F6281_BP DB88F6281_BP 1680 rd88f6192_nas MACH_RD88F6192_NAS RD88F6192_NAS 1681 rd88f6281 MACH_RD88F6281 RD88F6281 1682 db78x00_bp MACH_DB78X00_BP DB78X00_BP 1683 smdk2416 MACH_SMDK2416 SMDK2416 1685 -oce_spider_si MACH_OCE_SPIDER_SI OCE_SPIDER_SI 1686 -oce_spider_sk MACH_OCE_SPIDER_SK OCE_SPIDER_SK 1687 -rovern6 MACH_ROVERN6 ROVERN6 1688 -pelco_evolution MACH_PELCO_EVOLUTION PELCO_EVOLUTION 1689 wbd111 MACH_WBD111 WBD111 1690 -elaracpe MACH_ELARACPE ELARACPE 1691 -mabv3 MACH_MABV3 MABV3 1692 mv2120 MACH_MV2120 MV2120 1693 -csb737 MACH_CSB737 CSB737 1695 mx51_3ds MACH_MX51_3DS MX51_3DS 1696 -g900 MACH_G900 G900 1697 -apf27 MACH_APF27 APF27 1698 -ggus2000 MACH_GGUS2000 GGUS2000 1699 -omap_2430_mimic MACH_OMAP_2430_MIMIC OMAP_2430_MIMIC 1700 imx27lite MACH_IMX27LITE IMX27LITE 1701 -almex MACH_ALMEX ALMEX 1702 -control MACH_CONTROL CONTROL 1703 -mba2410 MACH_MBA2410 MBA2410 1704 -volcano MACH_VOLCANO VOLCANO 1705 -zenith MACH_ZENITH ZENITH 1706 -muchip MACH_MUCHIP MUCHIP 1707 -magellan MACH_MAGELLAN MAGELLAN 1708 usb_a9260 MACH_USB_A9260 USB_A9260 1709 usb_a9263 MACH_USB_A9263 USB_A9263 1710 qil_a9260 MACH_QIL_A9260 QIL_A9260 1711 -cme9210 MACH_CME9210 CME9210 1712 -hczh4 MACH_HCZH4 HCZH4 1713 -spearbasic MACH_SPEARBASIC SPEARBASIC 1714 -dep2440 MACH_DEP2440 DEP2440 1715 -hdl_gxr MACH_HDL_GXR HDL_GXR 1716 -hdl_gt MACH_HDL_GT HDL_GT 1717 -hdl_4g MACH_HDL_4G HDL_4G 1718 -s3c6000 MACH_S3C6000 S3C6000 1719 -mmsp2_mdk MACH_MMSP2_MDK MMSP2_MDK 1720 -mpx220 MACH_MPX220 MPX220 1721 kzm_arm11_01 MACH_KZM_ARM11_01 KZM_ARM11_01 1722 -htc_polaris MACH_HTC_POLARIS HTC_POLARIS 1723 -htc_kaiser MACH_HTC_KAISER HTC_KAISER 1724 -lg_ks20 MACH_LG_KS20 LG_KS20 1725 -hhgps MACH_HHGPS HHGPS 1726 nokia_n810_wimax MACH_NOKIA_N810_WIMAX NOKIA_N810_WIMAX 1727 -insight MACH_INSIGHT INSIGHT 1728 sapphire MACH_SAPPHIRE SAPPHIRE 1729 -csb637xo MACH_CSB637XO CSB637XO 1730 -evisiong MACH_EVISIONG EVISIONG 1731 stmp37xx MACH_STMP37XX STMP37XX 1732 stmp378x MACH_STMP378X STMP378X 1733 -tnt MACH_TNT TNT 1734 -tbxt MACH_TBXT TBXT 1735 -playmate MACH_PLAYMATE PLAYMATE 1736 -pns10 MACH_PNS10 PNS10 1737 -eznavi MACH_EZNAVI EZNAVI 1738 -ps4000 MACH_PS4000 PS4000 1739 ezx_a780 MACH_EZX_A780 EZX_A780 1740 ezx_e680 MACH_EZX_E680 EZX_E680 1741 ezx_a1200 MACH_EZX_A1200 EZX_A1200 1742 ezx_e6 MACH_EZX_E6 EZX_E6 1743 ezx_e2 MACH_EZX_E2 EZX_E2 1744 ezx_a910 MACH_EZX_A910 EZX_A910 1745 -cwmx31 MACH_CWMX31 CWMX31 1746 -sl2312 MACH_SL2312 SL2312 1747 -blenny MACH_BLENNY BLENNY 1748 -ds107 MACH_DS107 DS107 1749 -dsx07 MACH_DSX07 DSX07 1750 -picocom1 MACH_PICOCOM1 PICOCOM1 1751 -lynx_wolverine MACH_LYNX_WOLVERINE LYNX_WOLVERINE 1752 -ubisys_p9_sc19 MACH_UBISYS_P9_SC19 UBISYS_P9_SC19 1753 -kratos_low MACH_KRATOS_LOW KRATOS_LOW 1754 -m700 MACH_M700 M700 1755 edmini_v2 MACH_EDMINI_V2 EDMINI_V2 1756 zipit2 MACH_ZIPIT2 ZIPIT2 1757 -hslfemtocell MACH_HSLFEMTOCELL HSLFEMTOCELL 1758 -daintree_at91 MACH_DAINTREE_AT91 DAINTREE_AT91 1759 -sg560usb MACH_SG560USB SG560USB 1760 omap3_pandora MACH_OMAP3_PANDORA OMAP3_PANDORA 1761 -usr8200 MACH_USR8200 USR8200 1762 -s1s65k MACH_S1S65K S1S65K 1763 -s2s65a MACH_S2S65A S2S65A 1764 -icore MACH_ICORE ICORE 1765 mss2 MACH_MSS2 MSS2 1766 -belmont MACH_BELMONT BELMONT 1767 -asusp525 MACH_ASUSP525 ASUSP525 1768 lb88rc8480 MACH_LB88RC8480 LB88RC8480 1769 -hipxa MACH_HIPXA HIPXA 1770 mx25_3ds MACH_MX25_3DS MX25_3DS 1771 -m800 MACH_M800 M800 1772 omap3530_lv_som MACH_OMAP3530_LV_SOM OMAP3530_LV_SOM 1773 -prima_evb MACH_PRIMA_EVB PRIMA_EVB 1774 -mx31bt1 MACH_MX31BT1 MX31BT1 1775 -atlas4_evb MACH_ATLAS4_EVB ATLAS4_EVB 1776 -mx31cicada MACH_MX31CICADA MX31CICADA 1777 -mi424wr MACH_MI424WR MI424WR 1778 -axs_ultrax MACH_AXS_ULTRAX AXS_ULTRAX 1779 -at572d940deb MACH_AT572D940DEB AT572D940DEB 1780 davinci_da830_evm MACH_DAVINCI_DA830_EVM DAVINCI_DA830_EVM 1781 -ep9302 MACH_EP9302 EP9302 1782 at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783 -cybook3 MACH_CYBOOK3 CYBOOK3 1784 -wdg002 MACH_WDG002 WDG002 1785 -sg560adsl MACH_SG560ADSL SG560ADSL 1786 -nextio_n2800_ica MACH_NEXTIO_N2800_ICA NEXTIO_N2800_ICA 1787 dove_db MACH_DOVE_DB DOVE_DB 1788 -marvell_newdb MACH_MARVELL_NEWDB MARVELL_NEWDB 1789 -vandihud MACH_VANDIHUD VANDIHUD 1790 -magx_e8 MACH_MAGX_E8 MAGX_E8 1791 -magx_z6 MACH_MAGX_Z6 MAGX_Z6 1792 -magx_v8 MACH_MAGX_V8 MAGX_V8 1793 -magx_u9 MACH_MAGX_U9 MAGX_U9 1794 -toughcf08 MACH_TOUGHCF08 TOUGHCF08 1795 -zw4400 MACH_ZW4400 ZW4400 1796 -marat91 MACH_MARAT91 MARAT91 1797 overo MACH_OVERO OVERO 1798 at2440evb MACH_AT2440EVB AT2440EVB 1799 neocore926 MACH_NEOCORE926 NEOCORE926 1800 wnr854t MACH_WNR854T WNR854T 1801 -imx27 MACH_IMX27 IMX27 1802 -moose_db MACH_MOOSE_DB MOOSE_DB 1803 -fab4 MACH_FAB4 FAB4 1804 -htcdiamond MACH_HTCDIAMOND HTCDIAMOND 1805 -fiona MACH_FIONA FIONA 1806 -mxc30030_x MACH_MXC30030_X MXC30030_X 1807 -bmp1000 MACH_BMP1000 BMP1000 1808 -logi9200 MACH_LOGI9200 LOGI9200 1809 -tqma31 MACH_TQMA31 TQMA31 1810 -ccw9p9215js MACH_CCW9P9215JS CCW9P9215JS 1811 rd88f5181l_ge MACH_RD88F5181L_GE RD88F5181L_GE 1812 -sifmain MACH_SIFMAIN SIFMAIN 1813 -sam9_l9261 MACH_SAM9_L9261 SAM9_L9261 1814 -cc9m2443 MACH_CC9M2443 CC9M2443 1815 -xaria300 MACH_XARIA300 XARIA300 1816 -it9200 MACH_IT9200 IT9200 1817 rd88f5181l_fxo MACH_RD88F5181L_FXO RD88F5181L_FXO 1818 -kriss_sensor MACH_KRISS_SENSOR KRISS_SENSOR 1819 -pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820 -jade MACH_JADE JADE 1821 -ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822 -gprisc3 MACH_GPRISC3 GPRISC3 1823 stamp9g20 MACH_STAMP9G20 STAMP9G20 1824 -smdk6430 MACH_SMDK6430 SMDK6430 1825 smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 saar MACH_SAAR SAAR 1828 -deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829 at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830 -linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831 -hit_b0 MACH_HIT_B0 HIT_B0 1832 -adx_rmu MACH_ADX_RMU ADX_RMU 1833 -xg_cpe_main MACH_XG_CPE_MAIN XG_CPE_MAIN 1834 -edb9407a MACH_EDB9407A EDB9407A 1835 -dtb9608 MACH_DTB9608 DTB9608 1836 -em104v1 MACH_EM104V1 EM104V1 1837 -demo MACH_DEMO DEMO 1838 -logi9260 MACH_LOGI9260 LOGI9260 1839 -mx31_exm32 MACH_MX31_EXM32 MX31_EXM32 1840 -usb_a9g20 MACH_USB_A9G20 USB_A9G20 1841 -picproje2008 MACH_PICPROJE2008 PICPROJE2008 1842 -cs_e9315 MACH_CS_E9315 CS_E9315 1843 -qil_a9g20 MACH_QIL_A9G20 QIL_A9G20 1844 -sha_pon020 MACH_SHA_PON020 SHA_PON020 1845 -nad MACH_NAD NAD 1846 -sbc35_a9260 MACH_SBC35_A9260 SBC35_A9260 1847 -sbc35_a9g20 MACH_SBC35_A9G20 SBC35_A9G20 1848 -davinci_beginning MACH_DAVINCI_BEGINNING DAVINCI_BEGINNING 1849 -uwc MACH_UWC UWC 1850 mxlads MACH_MXLADS MXLADS 1851 -htcnike MACH_HTCNIKE HTCNIKE 1852 -deister_pxa270 MACH_DEISTER_PXA270 DEISTER_PXA270 1853 -cme9210js MACH_CME9210JS CME9210JS 1854 -cc9p9360 MACH_CC9P9360 CC9P9360 1855 -mocha MACH_MOCHA MOCHA 1856 -wapd170ag MACH_WAPD170AG WAPD170AG 1857 linkstation_mini MACH_LINKSTATION_MINI LINKSTATION_MINI 1858 afeb9260 MACH_AFEB9260 AFEB9260 1859 -w90x900 MACH_W90X900 W90X900 1860 -w90x700 MACH_W90X700 W90X700 1861 -kt300ip MACH_KT300IP KT300IP 1862 -kt300ip_g20 MACH_KT300IP_G20 KT300IP_G20 1863 -srcm MACH_SRCM SRCM 1864 -wlnx_9260 MACH_WLNX_9260 WLNX_9260 1865 -openmoko_gta03 MACH_OPENMOKO_GTA03 OPENMOKO_GTA03 1866 -osprey2 MACH_OSPREY2 OSPREY2 1867 -kbio9260 MACH_KBIO9260 KBIO9260 1868 -ginza MACH_GINZA GINZA 1869 -a636n MACH_A636N A636N 1870 imx27ipcam MACH_IMX27IPCAM IMX27IPCAM 1871 -nemoc MACH_NEMOC NEMOC 1872 -geneva MACH_GENEVA GENEVA 1873 -htcpharos MACH_HTCPHAROS HTCPHAROS 1874 -neonc MACH_NEONC NEONC 1875 -nas7100 MACH_NAS7100 NAS7100 1876 -teuphone MACH_TEUPHONE TEUPHONE 1877 -annax_eth2 MACH_ANNAX_ETH2 ANNAX_ETH2 1878 -csb733 MACH_CSB733 CSB733 1879 -bk3 MACH_BK3 BK3 1880 -omap_em32 MACH_OMAP_EM32 OMAP_EM32 1881 -et9261cp MACH_ET9261CP ET9261CP 1882 -jasperc MACH_JASPERC JASPERC 1883 -issi_arm9 MACH_ISSI_ARM9 ISSI_ARM9 1884 -ued MACH_UED UED 1885 -esiblade MACH_ESIBLADE ESIBLADE 1886 -eye02 MACH_EYE02 EYE02 1887 -imx27kbd MACH_IMX27KBD IMX27KBD 1888 -sst61vc010_fpga MACH_SST61VC010_FPGA SST61VC010_FPGA 1889 -kixvp435 MACH_KIXVP435 KIXVP435 1890 -kixnp435 MACH_KIXNP435 KIXNP435 1891 -africa MACH_AFRICA AFRICA 1892 -nh233 MACH_NH233 NH233 1893 rd88f6183ap_ge MACH_RD88F6183AP_GE RD88F6183AP_GE 1894 -bcm4760 MACH_BCM4760 BCM4760 1895 -eddy_v2 MACH_EDDY_V2 EDDY_V2 1896 realview_pba8 MACH_REALVIEW_PBA8 REALVIEW_PBA8 1897 -hid_a7 MACH_HID_A7 HID_A7 1898 -hero MACH_HERO HERO 1899 -omap_poseidon MACH_OMAP_POSEIDON OMAP_POSEIDON 1900 realview_pbx MACH_REALVIEW_PBX REALVIEW_PBX 1901 micro9s MACH_MICRO9S MICRO9S 1902 -mako MACH_MAKO MAKO 1903 -xdaflame MACH_XDAFLAME XDAFLAME 1904 -phidget_sbc2 MACH_PHIDGET_SBC2 PHIDGET_SBC2 1905 -limestone MACH_LIMESTONE LIMESTONE 1906 -iprobe_c32 MACH_IPROBE_C32 IPROBE_C32 1907 rut100 MACH_RUT100 RUT100 1908 -asusp535 MACH_ASUSP535 ASUSP535 1909 -htcraphael MACH_HTCRAPHAEL HTCRAPHAEL 1910 -sygdg1 MACH_SYGDG1 SYGDG1 1911 -sygdg2 MACH_SYGDG2 SYGDG2 1912 -seoul MACH_SEOUL SEOUL 1913 -salerno MACH_SALERNO SALERNO 1914 -ucn_s3c64xx MACH_UCN_S3C64XX UCN_S3C64XX 1915 -msm7201a MACH_MSM7201A MSM7201A 1916 -lpr1 MACH_LPR1 LPR1 1917 -armadillo500fx MACH_ARMADILLO500FX ARMADILLO500FX 1918 g3evm MACH_G3EVM G3EVM 1919 -z3_dm355 MACH_Z3_DM355 Z3_DM355 1920 w90p910evb MACH_W90P910EVB W90P910EVB 1921 -w90p920evb MACH_W90P920EVB W90P920EVB 1922 w90p950evb MACH_W90P950EVB W90P950EVB 1923 w90n960evb MACH_W90N960EVB W90N960EVB 1924 -camhd MACH_CAMHD CAMHD 1925 -mvc100 MACH_MVC100 MVC100 1926 -electrum_200 MACH_ELECTRUM_200 ELECTRUM_200 1927 -htcjade MACH_HTCJADE HTCJADE 1928 -memphis MACH_MEMPHIS MEMPHIS 1929 -imx27sbc MACH_IMX27SBC IMX27SBC 1930 -lextar MACH_LEXTAR LEXTAR 1931 mv88f6281gtw_ge MACH_MV88F6281GTW_GE MV88F6281GTW_GE 1932 ncp MACH_NCP NCP 1933 -z32an_series MACH_Z32AN Z32AN 1934 -tmq_capd MACH_TMQ_CAPD TMQ_CAPD 1935 -omap3_wl MACH_OMAP3_WL OMAP3_WL 1936 -chumby MACH_CHUMBY CHUMBY 1937 -atsarm9 MACH_ATSARM9 ATSARM9 1938 davinci_dm365_evm MACH_DAVINCI_DM365_EVM DAVINCI_DM365_EVM 1939 -bahamas MACH_BAHAMAS BAHAMAS 1940 -das MACH_DAS DAS 1941 -minidas MACH_MINIDAS MINIDAS 1942 -vk1000 MACH_VK1000 VK1000 1943 centro MACH_CENTRO CENTRO 1944 -ctera_2bay MACH_CTERA_2BAY CTERA_2BAY 1945 -edgeconnect MACH_EDGECONNECT EDGECONNECT 1946 -nd27000 MACH_ND27000 ND27000 1947 -cobra MACH_GEMALTO_COBRA GEMALTO_COBRA 1948 -ingelabs_comet MACH_INGELABS_COMET INGELABS_COMET 1949 -pollux_wiz MACH_POLLUX_WIZ POLLUX_WIZ 1950 -blackstone MACH_BLACKSTONE BLACKSTONE 1951 -topaz MACH_TOPAZ TOPAZ 1952 -aixle MACH_AIXLE AIXLE 1953 -mw998 MACH_MW998 MW998 1954 nokia_rx51 MACH_NOKIA_RX51 NOKIA_RX51 1955 -vsc5605ev MACH_VSC5605EV VSC5605EV 1956 -nt98700dk MACH_NT98700DK NT98700DK 1957 -icontact MACH_ICONTACT ICONTACT 1958 -swarco_frcpu MACH_SWARCO_FRCPU SWARCO_FRCPU 1959 -swarco_scpu MACH_SWARCO_SCPU SWARCO_SCPU 1960 -bbox_p16 MACH_BBOX_P16 BBOX_P16 1961 -bstd MACH_BSTD BSTD 1962 -sbc2440ii MACH_SBC2440II SBC2440II 1963 -pcm034 MACH_PCM034 PCM034 1964 -neso MACH_NESO NESO 1965 -wlnx_9g20 MACH_WLNX_9G20 WLNX_9G20 1966 omap_zoom2 MACH_OMAP_ZOOM2 OMAP_ZOOM2 1967 -totemnova MACH_TOTEMNOVA TOTEMNOVA 1968 -c5000 MACH_C5000 C5000 1969 -unipo_at91sam9263 MACH_UNIPO_AT91SAM9263 UNIPO_AT91SAM9263 1970 -ethernut5 MACH_ETHERNUT5 ETHERNUT5 1971 -arm11 MACH_ARM11 ARM11 1972 cpuat9260 MACH_CPUAT9260 CPUAT9260 1973 -cpupxa255 MACH_CPUPXA255 CPUPXA255 1974 eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975 -cheflux MACH_CHEFLUX CHEFLUX 1976 -eb_cpux9k2 MACH_EB_CPUX9K2 EB_CPUX9K2 1977 -opcotec MACH_OPCOTEC OPCOTEC 1978 -yt MACH_YT YT 1979 -motoq MACH_MOTOQ MOTOQ 1980 -bsb1 MACH_BSB1 BSB1 1981 acs5k MACH_ACS5K ACS5K 1982 -milan MACH_MILAN MILAN 1983 -quartzv2 MACH_QUARTZV2 QUARTZV2 1984 -rsvp MACH_RSVP RSVP 1985 -rmp200 MACH_RMP200 RMP200 1986 snapper_9260 MACH_SNAPPER_9260 SNAPPER_9260 1987 dsm320 MACH_DSM320 DSM320 1988 -adsgcm MACH_ADSGCM ADSGCM 1989 -ase2_400 MACH_ASE2_400 ASE2_400 1990 -pizza MACH_PIZZA PIZZA 1991 -spot_ngpl MACH_SPOT_NGPL SPOT_NGPL 1992 -armata MACH_ARMATA ARMATA 1993 exeda MACH_EXEDA EXEDA 1994 -mx31sf005 MACH_MX31SF005 MX31SF005 1995 -f5d8231_4_v2 MACH_F5D8231_4_V2 F5D8231_4_V2 1996 -q2440 MACH_Q2440 Q2440 1997 -qq2440 MACH_QQ2440 QQ2440 1998 mini2440 MACH_MINI2440 MINI2440 1999 colibri300 MACH_COLIBRI300 COLIBRI300 2000 -jades MACH_JADES JADES 2001 -spark MACH_SPARK SPARK 2002 -benzina MACH_BENZINA BENZINA 2003 -blaze MACH_BLAZE BLAZE 2004 linkstation_ls_hgl MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL 2005 -htckovsky MACH_HTCKOVSKY HTCKOVSKY 2006 -sony_prs505 MACH_SONY_PRS505 SONY_PRS505 2007 -hanlin_v3 MACH_HANLIN_V3 HANLIN_V3 2008 -sapphira MACH_SAPPHIRA SAPPHIRA 2009 -dack_sda_01 MACH_DACK_SDA_01 DACK_SDA_01 2010 -armbox MACH_ARMBOX ARMBOX 2011 -harris_rvp MACH_HARRIS_RVP HARRIS_RVP 2012 -ribaldo MACH_RIBALDO RIBALDO 2013 -agora MACH_AGORA AGORA 2014 -omap3_mini MACH_OMAP3_MINI OMAP3_MINI 2015 -a9sam6432_b MACH_A9SAM6432_B A9SAM6432_B 2016 -usg2410 MACH_USG2410 USG2410 2017 -pc72052_i10_revb MACH_PC72052_I10_REVB PC72052_I10_REVB 2018 -mx35_exm32 MACH_MX35_EXM32 MX35_EXM32 2019 -topas910 MACH_TOPAS910 TOPAS910 2020 -hyena MACH_HYENA HYENA 2021 -pospax MACH_POSPAX POSPAX 2022 -hdl_gx MACH_HDL_GX HDL_GX 2023 -ctera_4bay MACH_CTERA_4BAY CTERA_4BAY 2024 -ctera_plug_c MACH_CTERA_PLUG_C CTERA_PLUG_C 2025 -crwea_plug_i MACH_CRWEA_PLUG_I CRWEA_PLUG_I 2026 -egauge2 MACH_EGAUGE2 EGAUGE2 2027 -didj MACH_DIDJ DIDJ 2028 -m_s3c2443 MACH_MEISTER MEISTER 2029 -htcblackstone MACH_HTCBLACKSTONE HTCBLACKSTONE 2030 cpuat9g20 MACH_CPUAT9G20 CPUAT9G20 2031 smdk6440 MACH_SMDK6440 SMDK6440 2032 -omap_35xx_mvp MACH_OMAP_35XX_MVP OMAP_35XX_MVP 2033 -ctera_plug_i MACH_CTERA_PLUG_I CTERA_PLUG_I 2034 -pvg610_100 MACH_PVG610 PVG610 2035 -hprw6815 MACH_HPRW6815 HPRW6815 2036 -omap3_oswald MACH_OMAP3_OSWALD OMAP3_OSWALD 2037 nas4220b MACH_NAS4220B NAS4220B 2038 -htcraphael_cdma MACH_HTCRAPHAEL_CDMA HTCRAPHAEL_CDMA 2039 -htcdiamond_cdma MACH_HTCDIAMOND_CDMA HTCDIAMOND_CDMA 2040 -scaler MACH_SCALER SCALER 2041 zylonite2 MACH_ZYLONITE2 ZYLONITE2 2042 aspenite MACH_ASPENITE ASPENITE 2043 -teton MACH_TETON TETON 2044 ttc_dkb MACH_TTC_DKB TTC_DKB 2045 -bishop2 MACH_BISHOP2 BISHOP2 2046 -ippv5 MACH_IPPV5 IPPV5 2047 -farm926 MACH_FARM926 FARM926 2048 -mmccpu MACH_MMCCPU MMCCPU 2049 -sgmsfl MACH_SGMSFL SGMSFL 2050 -tt8000 MACH_TT8000 TT8000 2051 -zrn4300lp MACH_ZRN4300LP ZRN4300LP 2052 -mptc MACH_MPTC MPTC 2053 -h6051 MACH_H6051 H6051 2054 -pvg610_101 MACH_PVG610_101 PVG610_101 2055 -stamp9261_pc_evb MACH_STAMP9261_PC_EVB STAMP9261_PC_EVB 2056 -pelco_odysseus MACH_PELCO_ODYSSEUS PELCO_ODYSSEUS 2057 -tny_a9260 MACH_TNY_A9260 TNY_A9260 2058 -tny_a9g20 MACH_TNY_A9G20 TNY_A9G20 2059 -aesop_mp2530f MACH_AESOP_MP2530F AESOP_MP2530F 2060 -dx900 MACH_DX900 DX900 2061 -cpodc2 MACH_CPODC2 CPODC2 2062 -tilt_8925 MACH_TILT_8925 TILT_8925 2063 -davinci_dm357_evm MACH_DAVINCI_DM357_EVM DAVINCI_DM357_EVM 2064 -swordfish MACH_SWORDFISH SWORDFISH 2065 -corvus MACH_CORVUS CORVUS 2066 -taurus MACH_TAURUS TAURUS 2067 -axm MACH_AXM AXM 2068 -axc MACH_AXC AXC 2069 -baby MACH_BABY BABY 2070 -mp200 MACH_MP200 MP200 2071 pcm043 MACH_PCM043 PCM043 2072 -hanlin_v3c MACH_HANLIN_V3C HANLIN_V3C 2073 -kbk9g20 MACH_KBK9G20 KBK9G20 2074 -adsturbog5 MACH_ADSTURBOG5 ADSTURBOG5 2075 -avenger_lite1 MACH_AVENGER_LITE1 AVENGER_LITE1 2076 -suc82x MACH_SUC SUC 2077 -at91sam7s256 MACH_AT91SAM7S256 AT91SAM7S256 2078 -mendoza MACH_MENDOZA MENDOZA 2079 -kira MACH_KIRA KIRA 2080 -mx1hbm MACH_MX1HBM MX1HBM 2081 -quatro43xx MACH_QUATRO43XX QUATRO43XX 2082 -quatro4230 MACH_QUATRO4230 QUATRO4230 2083 -nsb400 MACH_NSB400 NSB400 2084 -drp255 MACH_DRP255 DRP255 2085 -thoth MACH_THOTH THOTH 2086 -firestone MACH_FIRESTONE FIRESTONE 2087 -asusp750 MACH_ASUSP750 ASUSP750 2088 -ctera_dl MACH_CTERA_DL CTERA_DL 2089 -socr MACH_SOCR SOCR 2090 -htcoxygen MACH_HTCOXYGEN HTCOXYGEN 2091 -heroc MACH_HEROC HEROC 2092 -zeno6800 MACH_ZENO6800 ZENO6800 2093 -sc2mcs MACH_SC2MCS SC2MCS 2094 -gene100 MACH_GENE100 GENE100 2095 -as353x MACH_AS353X AS353X 2096 sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097 -at91sam9g20 MACH_AT91SAM9G20 AT91SAM9G20 2098 -mv88f6192gtw_fe MACH_MV88F6192GTW_FE MV88F6192GTW_FE 2099 -cc9200 MACH_CC9200 CC9200 2100 -sm9200 MACH_SM9200 SM9200 2101 -tp9200 MACH_TP9200 TP9200 2102 -snapperdv MACH_SNAPPERDV SNAPPERDV 2103 avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104 -avengers_lite1 MACH_AVENGERS_LITE1 AVENGERS_LITE1 2105 -omap3axon MACH_OMAP3AXON OMAP3AXON 2106 -ma8xx MACH_MA8XX MA8XX 2107 -mp201ek MACH_MP201EK MP201EK 2108 -davinci_tux MACH_DAVINCI_TUX DAVINCI_TUX 2109 -mpa1600 MACH_MPA1600 MPA1600 2110 -pelco_troy MACH_PELCO_TROY PELCO_TROY 2111 -nsb667 MACH_NSB667 NSB667 2112 -rovers5_4mpix MACH_ROVERS5_4MPIX ROVERS5_4MPIX 2113 -twocom MACH_TWOCOM TWOCOM 2114 -ubisys_p9_rcu3r2 MACH_UBISYS_P9_RCU3R2 UBISYS_P9_RCU3R2 2115 -hero_espresso MACH_HERO_ESPRESSO HERO_ESPRESSO 2116 -afeusb MACH_AFEUSB AFEUSB 2117 -t830 MACH_T830 T830 2118 -spd8020_cc MACH_SPD8020_CC SPD8020_CC 2119 -om_3d7k MACH_OM_3D7K OM_3D7K 2120 -picocom2 MACH_PICOCOM2 PICOCOM2 2121 -uwg4mx27 MACH_UWG4MX27 UWG4MX27 2122 -uwg4mx31 MACH_UWG4MX31 UWG4MX31 2123 -cherry MACH_CHERRY CHERRY 2124 mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125 -s3c2440turkiye MACH_S3C2440TURKIYE S3C2440TURKIYE 2126 -tx37 MACH_TX37 TX37 2127 -sbc2800_9g20 MACH_SBC2800_9G20 SBC2800_9G20 2128 -benzglb MACH_BENZGLB BENZGLB 2129 -benztd MACH_BENZTD BENZTD 2130 -cartesio_plus MACH_CARTESIO_PLUS CARTESIO_PLUS 2131 -solrad_g20 MACH_SOLRAD_G20 SOLRAD_G20 2132 -mx27wallace MACH_MX27WALLACE MX27WALLACE 2133 -fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134 rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135 -smallogger MACH_SMALLOGGER SMALLOGGER 2136 -ccw9p9215 MACH_CCW9P9215 CCW9P9215 2137 dm355_leopard MACH_DM355_LEOPARD DM355_LEOPARD 2138 ts219 MACH_TS219 TS219 2139 -tny_a9263 MACH_TNY_A9263 TNY_A9263 2140 -apollo MACH_APOLLO APOLLO 2141 -at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142 -spc300 MACH_SPC300 SPC300 2143 -eko MACH_EKO EKO 2144 -ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145 -ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146 -m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147 -str9104nas MACH_STAR9104NAS STAR9104NAS 2148 pca100 MACH_PCA100 PCA100 2149 -z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150 -hipox MACH_HIPOX HIPOX 2151 -omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152 -bm150r MACH_BM150R BM150R 2153 -tbone MACH_TBONE TBONE 2154 -merlin MACH_MERLIN MERLIN 2155 -falcon MACH_FALCON FALCON 2156 davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157 -s5p6440 MACH_S5P6440 S5P6440 2158 at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159 omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 -lpc313x MACH_LPC313X LPC313X 2161 magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 -magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163 -magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164 -meesc MACH_MEESC MEESC 2165 -otc570 MACH_OTC570 OTC570 2166 -bcu2412 MACH_BCU2412 BCU2412 2167 -beacon MACH_BEACON BEACON 2168 -actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169 -e4430 MACH_E4430 E4430 2170 -ql300 MACH_QL300 QL300 2171 -btmavb101 MACH_BTMAVB101 BTMAVB101 2172 -btmawb101 MACH_BTMAWB101 BTMAWB101 2173 -sq201 MACH_SQ201 SQ201 2174 -quatro45xx MACH_QUATRO45XX QUATRO45XX 2175 -openpad MACH_OPENPAD OPENPAD 2176 -tx25 MACH_TX25 TX25 2177 omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 -htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179 -lal43 MACH_LAL43 LAL43 2181 -htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182 anw6410 MACH_ANW6410 ANW6410 2183 -htcprophet MACH_HTCPROPHET HTCPROPHET 2185 -cfa_10022 MACH_CFA_10022 CFA_10022 2186 imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 -px2imx27 MACH_PX2IMX27 PX2IMX27 2188 -stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189 -dvs10 MACH_DVS10 DVS10 2190 portuxg20 MACH_PORTUXG20 PORTUXG20 2191 -arm_spv MACH_ARM_SPV ARM_SPV 2192 smdkc110 MACH_SMDKC110 SMDKC110 2193 -cabespresso MACH_CABESPRESSO CABESPRESSO 2194 -hmc800 MACH_HMC800 HMC800 2195 -sholes MACH_SHOLES SHOLES 2196 -btmxc31 MACH_BTMXC31 BTMXC31 2197 -dt501 MACH_DT501 DT501 2198 -ktx MACH_KTX KTX 2199 omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200 netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201 netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202 d2net_v2 MACH_D2NET_V2 D2NET_V2 2203 net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204 -net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205 net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206 -endb2443 MACH_ENDB2443 ENDB2443 2207 inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208 -tros MACH_TROS TROS 2209 -pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210 -ofsp8 MACH_OFSP8 OFSP8 2211 at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212 -guf_cupid MACH_GUF_CUPID GUF_CUPID 2213 -eab1r MACH_EAB1R EAB1R 2214 -desirec MACH_DESIREC DESIREC 2215 -cordoba MACH_CORDOBA CORDOBA 2216 -irvine MACH_IRVINE IRVINE 2217 -sff772 MACH_SFF772 SFF772 2218 -pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219 pc7302 MACH_PC7302 PC7302 2220 -bip6000 MACH_BIP6000 BIP6000 2221 -silvermoon MACH_SILVERMOON SILVERMOON 2222 -vc0830 MACH_VC0830 VC0830 2223 -dt430 MACH_DT430 DT430 2224 -ji42pf MACH_JI42PF JI42PF 2225 -gnet_ksm MACH_GNET_KSM GNET_KSM 2226 -gnet_sgm MACH_GNET_SGM GNET_SGM 2227 -gnet_sgr MACH_GNET_SGR GNET_SGR 2228 -omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229 -pnp MACH_PNP PNP 2230 -ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231 -ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232 -sas_c MACH_SAS_C SAS_C 2233 -vma2315 MACH_VMA2315 VMA2315 2234 -vcs MACH_VCS VCS 2235 spear600 MACH_SPEAR600 SPEAR600 2236 spear300 MACH_SPEAR300 SPEAR300 2237 -spear1300 MACH_SPEAR1300 SPEAR1300 2238 lilly1131 MACH_LILLY1131 LILLY1131 2239 -arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240 -mapphone MACH_MAPPHONE MAPPHONE 2241 -legend MACH_LEGEND LEGEND 2242 -salsa MACH_SALSA SALSA 2243 -lounge MACH_LOUNGE LOUNGE 2244 -vision MACH_VISION VISION 2245 -vmb20 MACH_VMB20 VMB20 2246 -hy2410 MACH_HY2410 HY2410 2247 -hy9315 MACH_HY9315 HY9315 2248 -bullwinkle MACH_BULLWINKLE BULLWINKLE 2249 -arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 -vs_v210 MACH_VS_V210 VS_V210 2252 -vs_v212 MACH_VS_V212 VS_V212 2253 hmt MACH_HMT HMT 2254 -km_kirkwood MACH_KM_KIRKWOOD KM_KIRKWOOD 2255 -vesper MACH_VESPER VESPER 2256 -str9 MACH_STR9 STR9 2257 -omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 -simcom MACH_SIMCOM SIMCOM 2259 -mcwebio MACH_MCWEBIO MCWEBIO 2260 -omap3_phrazer MACH_OMAP3_PHRAZER OMAP3_PHRAZER 2261 -darwin MACH_DARWIN DARWIN 2262 -oratiscomu MACH_ORATISCOMU ORATISCOMU 2263 -rtsbc20 MACH_RTSBC20 RTSBC20 2264 -sgh_i780 MACH_I780 I780 2265 -gemini324 MACH_GEMINI324 GEMINI324 2266 -oratislan MACH_ORATISLAN ORATISLAN 2267 -oratisalog MACH_ORATISALOG ORATISALOG 2268 -oratismadi MACH_ORATISMADI ORATISMADI 2269 -oratisot16 MACH_ORATISOT16 ORATISOT16 2270 -oratisdesk MACH_ORATISDESK ORATISDESK 2271 vexpress MACH_VEXPRESS VEXPRESS 2272 -sintexo MACH_SINTEXO SINTEXO 2273 -cm3389 MACH_CM3389 CM3389 2274 -omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275 -sgh_i900 MACH_SGH_I900 SGH_I900 2276 -bst100 MACH_BST100 BST100 2277 -passion MACH_PASSION PASSION 2278 -indesign_at91sam MACH_INDESIGN_AT91SAM INDESIGN_AT91SAM 2279 -c4_badger MACH_C4_BADGER C4_BADGER 2280 -c4_viper MACH_C4_VIPER C4_VIPER 2281 d2net MACH_D2NET D2NET 2282 bigdisk MACH_BIGDISK BIGDISK 2283 -notalvision MACH_NOTALVISION NOTALVISION 2284 -omap3_kboc MACH_OMAP3_KBOC OMAP3_KBOC 2285 -cyclone MACH_CYCLONE CYCLONE 2286 -ninja MACH_NINJA NINJA 2287 at91sam9g20ek_2mmc MACH_AT91SAM9G20EK_2MMC AT91SAM9G20EK_2MMC 2288 bcmring MACH_BCMRING BCMRING 2289 -resol_dl2 MACH_RESOL_DL2 RESOL_DL2 2290 -ifosw MACH_IFOSW IFOSW 2291 -htcrhodium MACH_HTCRHODIUM HTCRHODIUM 2292 -htctopaz MACH_HTCTOPAZ HTCTOPAZ 2293 -matrix504 MACH_MATRIX504 MATRIX504 2294 -mrfsa MACH_MRFSA MRFSA 2295 -sc_p270 MACH_SC_P270 SC_P270 2296 -atlas5_evb MACH_ATLAS5_EVB ATLAS5_EVB 2297 -pelco_lobox MACH_PELCO_LOBOX PELCO_LOBOX 2298 -dilax_pcu200 MACH_DILAX_PCU200 DILAX_PCU200 2299 -leonardo MACH_LEONARDO LEONARDO 2300 -zoran_approach7 MACH_ZORAN_APPROACH7 ZORAN_APPROACH7 2301 -dp6xx MACH_DP6XX DP6XX 2302 -bcm2153_vesper MACH_BCM2153_VESPER BCM2153_VESPER 2303 mahimahi MACH_MAHIMAHI MAHIMAHI 2304 -clickc MACH_CLICKC CLICKC 2305 -zb_gateway MACH_ZB_GATEWAY ZB_GATEWAY 2306 -tazcard MACH_TAZCARD TAZCARD 2307 -tazdev MACH_TAZDEV TAZDEV 2308 -annax_cb_arm MACH_ANNAX_CB_ARM ANNAX_CB_ARM 2309 -annax_dm3 MACH_ANNAX_DM3 ANNAX_DM3 2310 -cerebric MACH_CEREBRIC CEREBRIC 2311 -orca MACH_ORCA ORCA 2312 -pc9260 MACH_PC9260 PC9260 2313 -ems285a MACH_EMS285A EMS285A 2314 -gec2410 MACH_GEC2410 GEC2410 2315 -gec2440 MACH_GEC2440 GEC2440 2316 -mw903 MACH_ARCH_MW903 ARCH_MW903 2317 -mw2440 MACH_MW2440 MW2440 2318 -ecac2378 MACH_ECAC2378 ECAC2378 2319 -tazkiosk MACH_TAZKIOSK TAZKIOSK 2320 -whiterabbit_mch MACH_WHITERABBIT_MCH WHITERABBIT_MCH 2321 -sbox9263 MACH_SBOX9263 SBOX9263 2322 -oreo MACH_OREO OREO 2323 smdk6442 MACH_SMDK6442 SMDK6442 2324 openrd_base MACH_OPENRD_BASE OPENRD_BASE 2325 -incredible MACH_INCREDIBLE INCREDIBLE 2326 -incrediblec MACH_INCREDIBLEC INCREDIBLEC 2327 -heroct MACH_HEROCT HEROCT 2328 -mmnet1000 MACH_MMNET1000 MMNET1000 2329 devkit8000 MACH_DEVKIT8000 DEVKIT8000 2330 -devkit9000 MACH_DEVKIT9000 DEVKIT9000 2331 -mx31txtr MACH_MX31TXTR MX31TXTR 2332 -u380 MACH_U380 U380 2333 -oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334 -npcmx50 MACH_NPCMX50 NPCMX50 2335 mx51_efikamx MACH_MX51_EFIKAMX MX51_EFIKAMX 2336 -mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337 -riom MACH_RIOM RIOM 2338 -comcas MACH_COMCAS COMCAS 2339 -wsi_mx27 MACH_WSI_MX27 WSI_MX27 2340 cm_t35 MACH_CM_T35 CM_T35 2341 net2big MACH_NET2BIG NET2BIG 2342 -motorola_a1600 MACH_MOTOROLA_A1600 MOTOROLA_A1600 2343 igep0020 MACH_IGEP0020 IGEP0020 2344 -igep0010 MACH_IGEP0010 IGEP0010 2345 -mv6281gtwge2 MACH_MV6281GTWGE2 MV6281GTWGE2 2346 -scat100 MACH_SCAT100 SCAT100 2347 -sanmina MACH_SANMINA SANMINA 2348 -momento MACH_MOMENTO MOMENTO 2349 -nuc9xx MACH_NUC9XX NUC9XX 2350 -nuc910evb MACH_NUC910EVB NUC910EVB 2351 -nuc920evb MACH_NUC920EVB NUC920EVB 2352 -nuc950evb MACH_NUC950EVB NUC950EVB 2353 -nuc945evb MACH_NUC945EVB NUC945EVB 2354 -nuc960evb MACH_NUC960EVB NUC960EVB 2355 nuc932evb MACH_NUC932EVB NUC932EVB 2356 -nuc900 MACH_NUC900 NUC900 2357 -sd1soc MACH_SD1SOC SD1SOC 2358 -ln2440bc MACH_LN2440BC LN2440BC 2359 -rsbc MACH_RSBC RSBC 2360 openrd_client MACH_OPENRD_CLIENT OPENRD_CLIENT 2361 -hpipaq11x MACH_HPIPAQ11X HPIPAQ11X 2362 -wayland MACH_WAYLAND WAYLAND 2363 -acnbsx102 MACH_ACNBSX102 ACNBSX102 2364 -hwat91 MACH_HWAT91 HWAT91 2365 -at91sam9263cs MACH_AT91SAM9263CS AT91SAM9263CS 2366 -csb732 MACH_CSB732 CSB732 2367 u8500 MACH_U8500 U8500 2368 -huqiu MACH_HUQIU HUQIU 2369 mx51_efikasb MACH_MX51_EFIKASB MX51_EFIKASB 2370 -pmt1g MACH_PMT1G PMT1G 2371 -htcelf MACH_HTCELF HTCELF 2372 -armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373 -armadillo440 MACH_ARMADILLO440 ARMADILLO440 2374 -u_chip_dual_arm MACH_U_CHIP_DUAL_ARM U_CHIP_DUAL_ARM 2375 -csr_bdb3 MACH_CSR_BDB3 CSR_BDB3 2376 -dolby_cat1018 MACH_DOLBY_CAT1018 DOLBY_CAT1018 2377 -hy9307 MACH_HY9307 HY9307 2378 -aspire_easystore MACH_A_ES A_ES 2379 -davinci_irif MACH_DAVINCI_IRIF DAVINCI_IRIF 2380 -agama9263 MACH_AGAMA9263 AGAMA9263 2381 marvell_jasper MACH_MARVELL_JASPER MARVELL_JASPER 2382 flint MACH_FLINT FLINT 2383 tavorevb3 MACH_TAVOREVB3 TAVOREVB3 2384 -sch_m490 MACH_SCH_M490 SCH_M490 2386 -rbl01 MACH_RBL01 RBL01 2387 -omnifi MACH_OMNIFI OMNIFI 2388 -otavalo MACH_OTAVALO OTAVALO 2389 -sienna MACH_SIENNA SIENNA 2390 -htc_excalibur_s620 MACH_HTC_EXCALIBUR_S620 HTC_EXCALIBUR_S620 2391 -htc_opal MACH_HTC_OPAL HTC_OPAL 2392 touchbook MACH_TOUCHBOOK TOUCHBOOK 2393 -latte MACH_LATTE LATTE 2394 -xa200 MACH_XA200 XA200 2395 -nimrod MACH_NIMROD NIMROD 2396 -cc9p9215_3g MACH_CC9P9215_3G CC9P9215_3G 2397 -cc9p9215_3gjs MACH_CC9P9215_3GJS CC9P9215_3GJS 2398 -tk71 MACH_TK71 TK71 2399 -comham3525 MACH_COMHAM3525 COMHAM3525 2400 -mx31erebus MACH_MX31EREBUS MX31EREBUS 2401 -mcardmx27 MACH_MCARDMX27 MCARDMX27 2402 -paradise MACH_PARADISE PARADISE 2403 -tide MACH_TIDE TIDE 2404 -wzl2440 MACH_WZL2440 WZL2440 2405 -sdrdemo MACH_SDRDEMO SDRDEMO 2406 -ethercan2 MACH_ETHERCAN2 ETHERCAN2 2407 -ecmimg20 MACH_ECMIMG20 ECMIMG20 2408 -omap_dragon MACH_OMAP_DRAGON OMAP_DRAGON 2409 -halo MACH_HALO HALO 2410 -huangshan MACH_HUANGSHAN HUANGSHAN 2411 -vl_ma2sc MACH_VL_MA2SC VL_MA2SC 2412 raumfeld_rc MACH_RAUMFELD_RC RAUMFELD_RC 2413 raumfeld_connector MACH_RAUMFELD_CONNECTOR RAUMFELD_CONNECTOR 2414 raumfeld_speaker MACH_RAUMFELD_SPEAKER RAUMFELD_SPEAKER 2415 -multibus_master MACH_MULTIBUS_MASTER MULTIBUS_MASTER 2416 -multibus_pbk MACH_MULTIBUS_PBK MULTIBUS_PBK 2417 tnetv107x MACH_TNETV107X TNETV107X 2418 -snake MACH_SNAKE SNAKE 2419 -cwmx27 MACH_CWMX27 CWMX27 2420 -sch_m480 MACH_SCH_M480 SCH_M480 2421 -platypus MACH_PLATYPUS PLATYPUS 2422 -pss2 MACH_PSS2 PSS2 2423 -davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424 -str9100 MACH_STR9100 STR9100 2425 -net5big MACH_NET5BIG NET5BIG 2426 -seabed9263 MACH_SEABED9263 SEABED9263 2427 -mx51_m2id MACH_MX51_M2ID MX51_M2ID 2428 -octvocplus_eb MACH_OCTVOCPLUS_EB OCTVOCPLUS_EB 2429 -klk_firefox MACH_KLK_FIREFOX KLK_FIREFOX 2430 -klk_wirma_module MACH_KLK_WIRMA_MODULE KLK_WIRMA_MODULE 2431 -klk_wirma_mmi MACH_KLK_WIRMA_MMI KLK_WIRMA_MMI 2432 -supersonic MACH_SUPERSONIC SUPERSONIC 2433 -liberty MACH_LIBERTY LIBERTY 2434 -mh355 MACH_MH355 MH355 2435 -pc7802 MACH_PC7802 PC7802 2436 -gnet_sgc MACH_GNET_SGC GNET_SGC 2437 -einstein15 MACH_EINSTEIN15 EINSTEIN15 2438 -cmpd MACH_CMPD CMPD 2439 -davinci_hase1 MACH_DAVINCI_HASE1 DAVINCI_HASE1 2440 -lgeincitephone MACH_LGEINCITEPHONE LGEINCITEPHONE 2441 -ea313x MACH_EA313X EA313X 2442 -fwbd_39064 MACH_FWBD_39064 FWBD_39064 2443 -fwbd_390128 MACH_FWBD_390128 FWBD_390128 2444 -pelco_moe MACH_PELCO_MOE PELCO_MOE 2445 -minimix27 MACH_MINIMIX27 MINIMIX27 2446 -omap3_thunder MACH_OMAP3_THUNDER OMAP3_THUNDER 2447 -passionc MACH_PASSIONC PASSIONC 2448 -mx27amata MACH_MX27AMATA MX27AMATA 2449 -bgat1 MACH_BGAT1 BGAT1 2450 -buzz MACH_BUZZ BUZZ 2451 -mb9g20 MACH_MB9G20 MB9G20 2452 -yushan MACH_YUSHAN YUSHAN 2453 -lizard MACH_LIZARD LIZARD 2454 -omap3polycom MACH_OMAP3POLYCOM OMAP3POLYCOM 2455 smdkv210 MACH_SMDKV210 SMDKV210 2456 -bravo MACH_BRAVO BRAVO 2457 -siogentoo1 MACH_SIOGENTOO1 SIOGENTOO1 2458 -siogentoo2 MACH_SIOGENTOO2 SIOGENTOO2 2459 -sm3k MACH_SM3K SM3K 2460 -acer_tempo_f900 MACH_ACER_TEMPO_F900 ACER_TEMPO_F900 2461 -sst61vc010_dev MACH_SST61VC010_DEV SST61VC010_DEV 2462 -glittertind MACH_GLITTERTIND GLITTERTIND 2463 omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464 omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465 -cybook2440 MACH_CYBOOK2440 CYBOOK2440 2466 -torino_s MACH_TORINO_S TORINO_S 2467 -havana MACH_HAVANA HAVANA 2468 -beaumont_11 MACH_BEAUMONT_11 BEAUMONT_11 2469 -vanguard MACH_VANGUARD VANGUARD 2470 -s5pc110_draco MACH_S5PC110_DRACO S5PC110_DRACO 2471 -cartesio_two MACH_CARTESIO_TWO CARTESIO_TWO 2472 -aster MACH_ASTER ASTER 2473 -voguesv210 MACH_VOGUESV210 VOGUESV210 2474 -acm500x MACH_ACM500X ACM500X 2475 -km9260 MACH_KM9260 KM9260 2476 -nideflexg1 MACH_NIDEFLEXG1 NIDEFLEXG1 2477 -ctera_plug_io MACH_CTERA_PLUG_IO CTERA_PLUG_IO 2478 smartq7 MACH_SMARTQ7 SMARTQ7 2479 -at91sam9g10ek2 MACH_AT91SAM9G10EK2 AT91SAM9G10EK2 2480 -asusp527 MACH_ASUSP527 ASUSP527 2481 -at91sam9g20mpm2 MACH_AT91SAM9G20MPM2 AT91SAM9G20MPM2 2482 -topasa900 MACH_TOPASA900 TOPASA900 2483 -electrum_100 MACH_ELECTRUM_100 ELECTRUM_100 2484 -mx51grb MACH_MX51GRB MX51GRB 2485 -xea300 MACH_XEA300 XEA300 2486 -htcstartrek MACH_HTCSTARTREK HTCSTARTREK 2487 -lima MACH_LIMA LIMA 2488 -csb740 MACH_CSB740 CSB740 2489 -usb_s8815 MACH_USB_S8815 USB_S8815 2490 -watson_efm_plugin MACH_WATSON_EFM_PLUGIN WATSON_EFM_PLUGIN 2491 -milkyway MACH_MILKYWAY MILKYWAY 2492 g4evm MACH_G4EVM G4EVM 2493 -picomod6 MACH_PICOMOD6 PICOMOD6 2494 omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495 -ip6000 MACH_IP6000 IP6000 2496 -ip6010 MACH_IP6010 IP6010 2497 -utm400 MACH_UTM400 UTM400 2498 -omap3_zybex MACH_OMAP3_ZYBEX OMAP3_ZYBEX 2499 -wireless_space MACH_WIRELESS_SPACE WIRELESS_SPACE 2500 -sx560 MACH_SX560 SX560 2501 ts41x MACH_TS41X TS41X 2502 -elphel10373 MACH_ELPHEL10373 ELPHEL10373 2503 -rhobot MACH_RHOBOT RHOBOT 2504 -mx51_refresh MACH_MX51_REFRESH MX51_REFRESH 2505 -ls9260 MACH_LS9260 LS9260 2506 -shank MACH_SHANK SHANK 2507 -qsd8x50_st1 MACH_QSD8X50_ST1 QSD8X50_ST1 2508 -at91sam9m10ekes MACH_AT91SAM9M10EKES AT91SAM9M10EKES 2509 -hiram MACH_HIRAM HIRAM 2510 phy3250 MACH_PHY3250 PHY3250 2511 -ea3250 MACH_EA3250 EA3250 2512 -fdi3250 MACH_FDI3250 FDI3250 2513 -whitestone MACH_WHITESTONE WHITESTONE 2514 -at91sam9263nit MACH_AT91SAM9263NIT AT91SAM9263NIT 2515 -ccmx51 MACH_CCMX51 CCMX51 2516 -ccmx51js MACH_CCMX51JS CCMX51JS 2517 -ccwmx51 MACH_CCWMX51 CCWMX51 2518 -ccwmx51js MACH_CCWMX51JS CCWMX51JS 2519 mini6410 MACH_MINI6410 MINI6410 2520 -tiny6410 MACH_TINY6410 TINY6410 2521 -nano6410 MACH_NANO6410 NANO6410 2522 -at572d940hfnldb MACH_AT572D940HFNLDB AT572D940HFNLDB 2523 -htcleo MACH_HTCLEO HTCLEO 2524 -avp13 MACH_AVP13 AVP13 2525 -xxsvideod MACH_XXSVIDEOD XXSVIDEOD 2526 -vpnext MACH_VPNEXT VPNEXT 2527 -swarco_itc3 MACH_SWARCO_ITC3 SWARCO_ITC3 2528 -tx51 MACH_TX51 TX51 2529 -dolby_cat1021 MACH_DOLBY_CAT1021 DOLBY_CAT1021 2530 mx28evk MACH_MX28EVK MX28EVK 2531 -phoenix260 MACH_PHOENIX260 PHOENIX260 2532 -uvaca_stork MACH_UVACA_STORK UVACA_STORK 2533 smartq5 MACH_SMARTQ5 SMARTQ5 2534 -all3078 MACH_ALL3078 ALL3078 2535 -ctera_2bay_ds MACH_CTERA_2BAY_DS CTERA_2BAY_DS 2536 -siogentoo3 MACH_SIOGENTOO3 SIOGENTOO3 2537 -epb5000 MACH_EPB5000 EPB5000 2538 -hy9263 MACH_HY9263 HY9263 2539 -acer_tempo_m900 MACH_ACER_TEMPO_M900 ACER_TEMPO_M900 2540 -acer_tempo_dx650 MACH_ACER_TEMPO_DX900 ACER_TEMPO_DX900 2541 -acer_tempo_x960 MACH_ACER_TEMPO_X960 ACER_TEMPO_X960 2542 -acer_eten_v900 MACH_ACER_ETEN_V900 ACER_ETEN_V900 2543 -acer_eten_x900 MACH_ACER_ETEN_X900 ACER_ETEN_X900 2544 -bonnell MACH_BONNELL BONNELL 2545 -oht_mx27 MACH_OHT_MX27 OHT_MX27 2546 -htcquartz MACH_HTCQUARTZ HTCQUARTZ 2547 davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 -c3ax03 MACH_C3AX03 C3AX03 2549 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 -esyx MACH_ESYX ESYX 2551 -dove_db2 MACH_DOVE_DB2 DOVE_DB2 2552 -bulldog MACH_BULLDOG BULLDOG 2553 -derell_me2000 MACH_DERELL_ME2000 DERELL_ME2000 2554 -bcmring_base MACH_BCMRING_BASE BCMRING_BASE 2555 -bcmring_evm MACH_BCMRING_EVM BCMRING_EVM 2556 -bcmring_evm_jazz MACH_BCMRING_EVM_JAZZ BCMRING_EVM_JAZZ 2557 -bcmring_sp MACH_BCMRING_SP BCMRING_SP 2558 -bcmring_sv MACH_BCMRING_SV BCMRING_SV 2559 -bcmring_sv_jazz MACH_BCMRING_SV_JAZZ BCMRING_SV_JAZZ 2560 -bcmring_tablet MACH_BCMRING_TABLET BCMRING_TABLET 2561 -bcmring_vp MACH_BCMRING_VP BCMRING_VP 2562 -bcmring_evm_seikor MACH_BCMRING_EVM_SEIKOR BCMRING_EVM_SEIKOR 2563 -bcmring_sp_wqvga MACH_BCMRING_SP_WQVGA BCMRING_SP_WQVGA 2564 -bcmring_custom MACH_BCMRING_CUSTOM BCMRING_CUSTOM 2565 -acer_s200 MACH_ACER_S200 ACER_S200 2566 -bt270 MACH_BT270 BT270 2567 -iseo MACH_ISEO ISEO 2568 -cezanne MACH_CEZANNE CEZANNE 2569 -lucca MACH_LUCCA LUCCA 2570 -supersmart MACH_SUPERSMART SUPERSMART 2571 -arm11_board MACH_CS_MISANO CS_MISANO 2572 -magnolia2 MACH_MAGNOLIA2 MAGNOLIA2 2573 -emxx MACH_EMXX EMXX 2574 -outlaw MACH_OUTLAW OUTLAW 2575 -riot_bei2 MACH_RIOT_BEI2 RIOT_BEI2 2576 -riot_vox MACH_RIOT_VOX RIOT_VOX 2577 -riot_x37 MACH_RIOT_X37 RIOT_X37 2578 -mega25mx MACH_MEGA25MX MEGA25MX 2579 -benzina2 MACH_BENZINA2 BENZINA2 2580 -ignite MACH_IGNITE IGNITE 2581 -foggia MACH_FOGGIA FOGGIA 2582 -arezzo MACH_AREZZO AREZZO 2583 -leica_skywalker MACH_LEICA_SKYWALKER LEICA_SKYWALKER 2584 -jacinto2_jamr MACH_JACINTO2_JAMR JACINTO2_JAMR 2585 -gts_nova MACH_GTS_NOVA GTS_NOVA 2586 -p3600 MACH_P3600 P3600 2587 -dlt2 MACH_DLT2 DLT2 2588 -df3120 MACH_DF3120 DF3120 2589 -ecucore_9g20 MACH_ECUCORE_9G20 ECUCORE_9G20 2590 -nautel_lpc3240 MACH_NAUTEL_LPC3240 NAUTEL_LPC3240 2591 -glacier MACH_GLACIER GLACIER 2592 -phrazer_bulldog MACH_PHRAZER_BULLDOG PHRAZER_BULLDOG 2593 -omap3_bulldog MACH_OMAP3_BULLDOG OMAP3_BULLDOG 2594 -pca101 MACH_PCA101 PCA101 2595 -buzzc MACH_BUZZC BUZZC 2596 -sasie2 MACH_SASIE2 SASIE2 2597 -davinci_cio MACH_DAVINCI_CIO DAVINCI_CIO 2598 -smartmeter_dl MACH_SMARTMETER_DL SMARTMETER_DL 2599 -wzl6410 MACH_WZL6410 WZL6410 2600 -wzl6410m MACH_WZL6410M WZL6410M 2601 -wzl6410f MACH_WZL6410F WZL6410F 2602 -wzl6410i MACH_WZL6410I WZL6410I 2603 -spacecom1 MACH_SPACECOM1 SPACECOM1 2604 -pingu920 MACH_PINGU920 PINGU920 2605 -bravoc MACH_BRAVOC BRAVOC 2606 -cybo2440 MACH_CYBO2440 CYBO2440 2607 -vdssw MACH_VDSSW VDSSW 2608 -romulus MACH_ROMULUS ROMULUS 2609 -omap_magic MACH_OMAP_MAGIC OMAP_MAGIC 2610 -eltd100 MACH_ELTD100 ELTD100 2611 capc7117 MACH_CAPC7117 CAPC7117 2612 -swan MACH_SWAN SWAN 2613 -veu MACH_VEU VEU 2614 -rm2 MACH_RM2 RM2 2615 -tt2100 MACH_TT2100 TT2100 2616 -venice MACH_VENICE VENICE 2617 -pc7323 MACH_PC7323 PC7323 2618 -masp MACH_MASP MASP 2619 -fujitsu_tvstbsoc0 MACH_FUJITSU_TVSTBSOC FUJITSU_TVSTBSOC 2620 -fujitsu_tvstbsoc1 MACH_FUJITSU_TVSTBSOC1 FUJITSU_TVSTBSOC1 2621 -lexikon MACH_LEXIKON LEXIKON 2622 -mini2440v2 MACH_MINI2440V2 MINI2440V2 2623 icontrol MACH_ICONTROL ICONTROL 2624 -gplugd MACH_SHEEVAD SHEEVAD 2625 -qsd8x50a_st1_1 MACH_QSD8X50A_ST1_1 QSD8X50A_ST1_1 2626 qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627 -bee MACH_BEE BEE 2628 mx23evk MACH_MX23EVK MX23EVK 2629 ap4evb MACH_AP4EVB AP4EVB 2630 -stockholm MACH_STOCKHOLM STOCKHOLM 2631 -lpc_h3131 MACH_LPC_H3131 LPC_H3131 2632 -stingray MACH_STINGRAY STINGRAY 2633 -kraken MACH_KRAKEN KRAKEN 2634 -gw2388 MACH_GW2388 GW2388 2635 -jadecpu MACH_JADECPU JADECPU 2636 -carlisle MACH_CARLISLE CARLISLE 2637 -lux_sf9 MACH_LUX_SF9 LUX_SF9 2638 -nemid_tb MACH_NEMID_TB NEMID_TB 2639 -terrier MACH_TERRIER TERRIER 2640 -turbot MACH_TURBOT TURBOT 2641 -sanddab MACH_SANDDAB SANDDAB 2642 -mx35_cicada MACH_MX35_CICADA MX35_CICADA 2643 -ghi2703d MACH_GHI2703D GHI2703D 2644 -lux_sfx9 MACH_LUX_SFX9 LUX_SFX9 2645 -lux_sf9g MACH_LUX_SF9G LUX_SF9G 2646 -lux_edk9 MACH_LUX_EDK9 LUX_EDK9 2647 -hw90240 MACH_HW90240 HW90240 2648 -dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649 mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650 -scat110 MACH_SCAT110 SCAT110 2651 -acer_a1 MACH_ACER_A1 ACER_A1 2652 -cmcontrol MACH_CMCONTROL CMCONTROL 2653 -pelco_lamar MACH_PELCO_LAMAR PELCO_LAMAR 2654 -rfp43 MACH_RFP43 RFP43 2655 -sk86r0301 MACH_SK86R0301 SK86R0301 2656 -ctpxa MACH_CTPXA CTPXA 2657 -epb_arm9_a MACH_EPB_ARM9_A EPB_ARM9_A 2658 guruplug MACH_GURUPLUG GURUPLUG 2659 spear310 MACH_SPEAR310 SPEAR310 2660 spear320 MACH_SPEAR320 SPEAR320 2661 -robotx MACH_ROBOTX ROBOTX 2662 -lsxhl MACH_LSXHL LSXHL 2663 -smartlite MACH_SMARTLITE SMARTLITE 2664 -cws2 MACH_CWS2 CWS2 2665 -m619 MACH_M619 M619 2666 -smartview MACH_SMARTVIEW SMARTVIEW 2667 -lsa_salsa MACH_LSA_SALSA LSA_SALSA 2668 -kizbox MACH_KIZBOX KIZBOX 2669 -htccharmer MACH_HTCCHARMER HTCCHARMER 2670 -guf_neso_lt MACH_GUF_NESO_LT GUF_NESO_LT 2671 -pm9g45 MACH_PM9G45 PM9G45 2672 -htcpanther MACH_HTCPANTHER HTCPANTHER 2673 -htcpanther_cdma MACH_HTCPANTHER_CDMA HTCPANTHER_CDMA 2674 -reb01 MACH_REB01 REB01 2675 aquila MACH_AQUILA AQUILA 2676 -spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677 sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679 -micro2440 MACH_MICRO2440 MICRO2440 2680 -am2440 MACH_AM2440 AM2440 2681 -tq2440 MACH_TQ2440 TQ2440 2682 -lpc2478oem MACH_LPC2478OEM LPC2478OEM 2683 -ak880x MACH_AK880X AK880X 2684 -cobra3530 MACH_COBRA3530 COBRA3530 2685 -pmppb MACH_PMPPB PMPPB 2686 -u6715 MACH_U6715 U6715 2687 -axar1500_sender MACH_AXAR1500_SENDER AXAR1500_SENDER 2688 -g30_dvb MACH_G30_DVB G30_DVB 2689 -vc088x MACH_VC088X VC088X 2690 -mioa702 MACH_MIOA702 MIOA702 2691 -hpmin MACH_HPMIN HPMIN 2692 -ak880xak MACH_AK880XAK AK880XAK 2693 -arm926tomap850 MACH_ARM926TOMAP850 ARM926TOMAP850 2694 -lkevm MACH_LKEVM LKEVM 2695 -mw6410 MACH_MW6410 MW6410 2696 terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697 -cpu8000e MACH_CPU8000E CPU8000E 2698 -catania MACH_CATANIA CATANIA 2699 -tokyo MACH_TOKYO TOKYO 2700 -msm7201a_surf MACH_MSM7201A_SURF MSM7201A_SURF 2701 -msm7201a_ffa MACH_MSM7201A_FFA MSM7201A_FFA 2702 msm7x25_surf MACH_MSM7X25_SURF MSM7X25_SURF 2703 msm7x25_ffa MACH_MSM7X25_FFA MSM7X25_FFA 2704 msm7x27_surf MACH_MSM7X27_SURF MSM7X27_SURF 2705 msm7x27_ffa MACH_MSM7X27_FFA MSM7X27_FFA 2706 msm7x30_ffa MACH_MSM7X30_FFA MSM7X30_FFA 2707 qsd8x50_surf MACH_QSD8X50_SURF QSD8X50_SURF 2708 -qsd8x50_comet MACH_QSD8X50_COMET QSD8X50_COMET 2709 -qsd8x50_ffa MACH_QSD8X50_FFA QSD8X50_FFA 2710 -qsd8x50a_surf MACH_QSD8X50A_SURF QSD8X50A_SURF 2711 -qsd8x50a_ffa MACH_QSD8X50A_FFA QSD8X50A_FFA 2712 -adx_xgcp10 MACH_ADX_XGCP10 ADX_XGCP10 2713 -mcgwumts2a MACH_MCGWUMTS2A MCGWUMTS2A 2714 -mobikt MACH_MOBIKT MOBIKT 2715 mx53_evk MACH_MX53_EVK MX53_EVK 2716 igep0030 MACH_IGEP0030 IGEP0030 2717 -axell_h40_h50_ctrl MACH_AXELL_H40_H50_CTRL AXELL_H40_H50_CTRL 2718 -dtcommod MACH_DTCOMMOD DTCOMMOD 2719 -gould MACH_GOULD GOULD 2720 -siberia MACH_SIBERIA SIBERIA 2721 sbc3530 MACH_SBC3530 SBC3530 2722 -qarm MACH_QARM QARM 2723 -mips MACH_MIPS MIPS 2724 -mx27grb MACH_MX27GRB MX27GRB 2725 -sbc8100 MACH_SBC8100 SBC8100 2726 saarb MACH_SAARB SAARB 2727 -omap3mini MACH_OMAP3MINI OMAP3MINI 2728 -cnmbook7se MACH_CNMBOOK7SE CNMBOOK7SE 2729 -catan MACH_CATAN CATAN 2730 harmony MACH_HARMONY HARMONY 2731 -tonga MACH_TONGA TONGA 2732 -cybook_orizon MACH_CYBOOK_ORIZON CYBOOK_ORIZON 2733 -htcrhodiumcdma MACH_HTCRHODIUMCDMA HTCRHODIUMCDMA 2734 -epc_g45 MACH_EPC_G45 EPC_G45 2735 -epc_lpc3250 MACH_EPC_LPC3250 EPC_LPC3250 2736 -mxc91341evb MACH_MXC91341EVB MXC91341EVB 2737 -rtw1000 MACH_RTW1000 RTW1000 2738 -bobcat MACH_BOBCAT BOBCAT 2739 -trizeps6 MACH_TRIZEPS6 TRIZEPS6 2740 msm7x30_fluid MACH_MSM7X30_FLUID MSM7X30_FLUID 2741 -nedap9263 MACH_NEDAP9263 NEDAP9263 2742 -netgear_ms2110 MACH_NETGEAR_MS2110 NETGEAR_MS2110 2743 -bmx MACH_BMX BMX 2744 -netstream MACH_NETSTREAM NETSTREAM 2745 -vpnext_rcu MACH_VPNEXT_RCU VPNEXT_RCU 2746 -vpnext_mpu MACH_VPNEXT_MPU VPNEXT_MPU 2747 -bcmring_tablet_v1 MACH_BCMRING_TABLET_V1 BCMRING_TABLET_V1 2748 -sgarm10 MACH_SGARM10 SGARM10 2749 cm_t3517 MACH_CM_T3517 CM_T3517 2750 -omap3_cps MACH_OMAP3_CPS OMAP3_CPS 2751 -axar1500_receiver MACH_AXAR1500_RECEIVER AXAR1500_RECEIVER 2752 wbd222 MACH_WBD222 WBD222 2753 -mt65xx MACH_MT65XX MT65XX 2754 msm8x60_surf MACH_MSM8X60_SURF MSM8X60_SURF 2755 msm8x60_sim MACH_MSM8X60_SIM MSM8X60_SIM 2756 -vmc300 MACH_VMC300 VMC300 2757 tcc8000_sdk MACH_TCC8000_SDK TCC8000_SDK 2758 -nanos MACH_NANOS NANOS 2759 -stamp9g10 MACH_STAMP9G10 STAMP9G10 2760 -stamp9g45 MACH_STAMP9G45 STAMP9G45 2761 -h6053 MACH_H6053 H6053 2762 -smint01 MACH_SMINT01 SMINT01 2763 -prtlvt2 MACH_PRTLVT2 PRTLVT2 2764 ap420 MACH_AP420 AP420 2765 -htcshift MACH_HTCSHIFT HTCSHIFT 2766 davinci_dm365_fc MACH_DAVINCI_DM365_FC DAVINCI_DM365_FC 2767 msm8x55_surf MACH_MSM8X55_SURF MSM8X55_SURF 2768 msm8x55_ffa MACH_MSM8X55_FFA MSM8X55_FFA 2769 @@ -2761,7 +474,6 @@ oreo_controller MACH_OREO_CONTROLLER OREO_CONTROLLER 2773 kopin_models MACH_KOPIN_MODELS KOPIN_MODELS 2774 ttc_vision2 MACH_TTC_VISION2 TTC_VISION2 2775 cns3420vb MACH_CNS3420VB CNS3420VB 2776 -lpc2 MACH_LPC2 LPC2 2777 olympus MACH_OLYMPUS OLYMPUS 2778 vortex MACH_VORTEX VORTEX 2779 s5pc200 MACH_S5PC200 S5PC200 2780 @@ -2788,7 +500,6 @@ ti8168evm MACH_TI8168EVM TI8168EVM 2800 neocoreomap MACH_NEOCOREOMAP NEOCOREOMAP 2801 withings_wbp MACH_WITHINGS_WBP WITHINGS_WBP 2802 dbps MACH_DBPS DBPS 2803 -sbc9261 MACH_SBC9261 SBC9261 2804 pcbfp0001 MACH_PCBFP0001 PCBFP0001 2805 speedy MACH_SPEEDY SPEEDY 2806 chrysaor MACH_CHRYSAOR CHRYSAOR 2807 @@ -2812,7 +523,6 @@ p565 MACH_P565 P565 2824 acer_a4 MACH_ACER_A4 ACER_A4 2825 davinci_dm368_bip MACH_DAVINCI_DM368_BIP DAVINCI_DM368_BIP 2826 eshare MACH_ESHARE ESHARE 2827 -hw_omapl138_europa MACH_HW_OMAPL138_EUROPA HW_OMAPL138_EUROPA 2828 wlbargn MACH_WLBARGN WLBARGN 2829 bm170 MACH_BM170 BM170 2830 netspace_mini_v2 MACH_NETSPACE_MINI_V2 NETSPACE_MINI_V2 2831 @@ -2879,7 +589,6 @@ davinci_picto MACH_DAVINCI_PICTO DAVINCI_PICTO 2891 mecha MACH_MECHA MECHA 2892 bubba3 MACH_BUBBA3 BUBBA3 2893 pupitre MACH_PUPITRE PUPITRE 2894 -tegra_harmony MACH_TEGRA_HARMONY TEGRA_HARMONY 2895 tegra_vogue MACH_TEGRA_VOGUE TEGRA_VOGUE 2896 tegra_e1165 MACH_TEGRA_E1165 TEGRA_E1165 2897 simplenet MACH_SIMPLENET SIMPLENET 2898 @@ -2969,7 +678,6 @@ netspace_lite_v2 MACH_NETSPACE_LITE_V2 NETSPACE_LITE_V2 2983 ssc MACH_SSC SSC 2984 premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985 wasabi MACH_WASABI WASABI 2986 -vivow MACH_VIVOW VIVOW 2987 mx50_rdp MACH_MX50_RDP MX50_RDP 2988 universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989 real6410 MACH_REAL6410 REAL6410 2990 @@ -3017,12 +725,10 @@ remus MACH_REMUS REMUS 3031 at91cap7xdk MACH_AT91CAP7XDK AT91CAP7XDK 3032 at91cap7stk MACH_AT91CAP7STK AT91CAP7STK 3033 kt_sbc_sam9_1 MACH_KT_SBC_SAM9_1 KT_SBC_SAM9_1 3034 -oratisrouter MACH_ORATISROUTER ORATISROUTER 3035 armada_xp_db MACH_ARMADA_XP_DB ARMADA_XP_DB 3036 spdm MACH_SPDM SPDM 3037 gtib MACH_GTIB GTIB 3038 dgm3240 MACH_DGM3240 DGM3240 3039 -atlas_i_lpe MACH_ATLAS_I_LPE ATLAS_I_LPE 3040 htcmega MACH_HTCMEGA HTCMEGA 3041 tricorder MACH_TRICORDER TRICORDER 3042 tx28 MACH_TX28 TX28 3043 @@ -3062,7 +768,6 @@ clod MACH_CLOD CLOD 3077 rump MACH_RUMP RUMP 3078 tenderloin MACH_TENDERLOIN TENDERLOIN 3079 shortloin MACH_SHORTLOIN SHORTLOIN 3080 -crespo MACH_CRESPO CRESPO 3081 antares MACH_ANTARES ANTARES 3082 wb40n MACH_WB40N WB40N 3083 herring MACH_HERRING HERRING 3084 @@ -3111,7 +816,6 @@ smartqv3 MACH_SMARTQV3 SMARTQV3 3126 smartqv7 MACH_SMARTQV7 SMARTQV7 3127 paz00 MACH_PAZ00 PAZ00 3128 acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129 -htcwillow MACH_HTCWILLOW HTCWILLOW 3130 fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131 hdgu MACH_HDGU HDGU 3132 pyramid MACH_PYRAMID PYRAMID 3133 @@ -3162,7 +866,6 @@ b5500 MACH_B5500 B5500 3177 s5500 MACH_S5500 S5500 3178 icon MACH_ICON ICON 3179 elephant MACH_ELEPHANT ELEPHANT 3180 -msm8x60_fusion MACH_MSM8X60_FUSION MSM8X60_FUSION 3181 shooter MACH_SHOOTER SHOOTER 3182 spade_lte MACH_SPADE_LTE SPADE_LTE 3183 philhwani MACH_PHILHWANI PHILHWANI 3184 @@ -3174,13 +877,11 @@ ag5evm MACH_AG5EVM AG5EVM 3189 sc575plc MACH_SC575PLC SC575PLC 3190 sc575hmi MACH_SC575IPC SC575IPC 3191 omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192 -g7 MACH_G7 G7 3193 top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194 top9000_su MACH_TOP9000_SU TOP9000_SU 3195 utm300 MACH_UTM300 UTM300 3196 tsunagi MACH_TSUNAGI TSUNAGI 3197 ts75xx MACH_TS75XX TS75XX 3198 -msm8x60_fusn_ffa MACH_MSM8X60_FUSN_FFA MSM8X60_FUSN_FFA 3199 ts47xx MACH_TS47XX TS47XX 3200 da850_k5 MACH_DA850_K5 DA850_K5 3201 ax502 MACH_AX502 AX502 3202 @@ -3285,7 +986,6 @@ rfl109145_ssrv MACH_RFL109145_SSRV RFL109145_SSRV 3304 nmh MACH_NMH NMH 3305 wn802t MACH_WN802T WN802T 3306 dragonet MACH_DRAGONET DRAGONET 3307 -geneva_b MACH_GENEVA_B GENEVA_B 3308 at91sam9263desk16l MACH_AT91SAM9263DESK16L AT91SAM9263DESK16L 3309 bcmhana_sv MACH_BCMHANA_SV BCMHANA_SV 3310 bcmhana_tablet MACH_BCMHANA_TABLET BCMHANA_TABLET 3311 @@ -3316,3 +1016,86 @@ rover_g8 MACH_ROVER_G8 ROVER_G8 3335 t5388p MACH_T5388P T5388P 3336 dingo MACH_DINGO DINGO 3337 goflexhome MACH_GOFLEXHOME GOFLEXHOME 3338 +lanreadyfn511 MACH_LANREADYFN511 LANREADYFN511 3340 +omap3_baia MACH_OMAP3_BAIA OMAP3_BAIA 3341 +omap3smartdisplay MACH_OMAP3SMARTDISPLAY OMAP3SMARTDISPLAY 3342 +xilinx MACH_XILINX XILINX 3343 +a2f MACH_A2F A2F 3344 +sky25 MACH_SKY25 SKY25 3345 +ccmx53 MACH_CCMX53 CCMX53 3346 +ccmx53js MACH_CCMX53JS CCMX53JS 3347 +ccwmx53 MACH_CCWMX53 CCWMX53 3348 +ccwmx53js MACH_CCWMX53JS CCWMX53JS 3349 +frisms MACH_FRISMS FRISMS 3350 +msm7x27a_ffa MACH_MSM7X27A_FFA MSM7X27A_FFA 3351 +msm7x27a_surf MACH_MSM7X27A_SURF MSM7X27A_SURF 3352 +msm7x27a_rumi3 MACH_MSM7X27A_RUMI3 MSM7X27A_RUMI3 3353 +dimmsam9g20 MACH_DIMMSAM9G20 DIMMSAM9G20 3354 +dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 +amk_a4 MACH_AMK_A4 AMK_A4 3356 +gnet_sgme MACH_GNET_SGME GNET_SGME 3357 +shooter_u MACH_SHOOTER_U SHOOTER_U 3358 +vmx53 MACH_VMX53 VMX53 3359 +rhino MACH_RHINO RHINO 3360 +armlex4210 MACH_ARMLEX4210 ARMLEX4210 3361 +swarcoextmodem MACH_SWARCOEXTMODEM SWARCOEXTMODEM 3362 +snowball MACH_SNOWBALL SNOWBALL 3363 +pcm049 MACH_PCM049 PCM049 3364 +vigor MACH_VIGOR VIGOR 3365 +oslo_amundsen MACH_OSLO_AMUNDSEN OSLO_AMUNDSEN 3366 +gsl_diamond MACH_GSL_DIAMOND GSL_DIAMOND 3367 +cv2201 MACH_CV2201 CV2201 3368 +cv2202 MACH_CV2202 CV2202 3369 +cv2203 MACH_CV2203 CV2203 3370 +vit_ibox MACH_VIT_IBOX VIT_IBOX 3371 +dm6441_esp MACH_DM6441_ESP DM6441_ESP 3372 +at91sam9x5ek MACH_AT91SAM9X5EK AT91SAM9X5EK 3373 +libra MACH_LIBRA LIBRA 3374 +easycrrh MACH_EASYCRRH EASYCRRH 3375 +tripel MACH_TRIPEL TRIPEL 3376 +endian_mini MACH_ENDIAN_MINI ENDIAN_MINI 3377 +xilinx_ep107 MACH_XILINX_EP107 XILINX_EP107 3378 +nuri MACH_NURI NURI 3379 +janus MACH_JANUS JANUS 3380 +ddnas MACH_DDNAS DDNAS 3381 +tag MACH_TAG TAG 3382 +tagw MACH_TAGW TAGW 3383 +nitrogen_vm_imx51 MACH_NITROGEN_VM_IMX51 NITROGEN_VM_IMX51 3384 +viprinet MACH_VIPRINET VIPRINET 3385 +bockw MACH_BOCKW BOCKW 3386 +eva2000 MACH_EVA2000 EVA2000 3387 +steelyard MACH_STEELYARD STEELYARD 3388 +sdh001 MACH_MACH_SDH001 MACH_SDH001 3390 +nsslsboard MACH_NSSLSBOARD NSSLSBOARD 3392 +geneva_b5 MACH_GENEVA_B5 GENEVA_B5 3393 +spear1340 MACH_SPEAR1340 SPEAR1340 3394 +rexmas MACH_REXMAS REXMAS 3395 +msm8960_cdp MACH_MSM8960_CDP MSM8960_CDP 3396 +msm8960_mdp MACH_MSM8960_MDP MSM8960_MDP 3397 +msm8960_fluid MACH_MSM8960_FLUID MSM8960_FLUID 3398 +msm8960_apq MACH_MSM8960_APQ MSM8960_APQ 3399 +helios_v2 MACH_HELIOS_V2 HELIOS_V2 3400 +mif10p MACH_MIF10P MIF10P 3401 +iam28 MACH_IAM28 IAM28 3402 +picasso MACH_PICASSO PICASSO 3403 +mr301a MACH_MR301A MR301A 3404 +notle MACH_NOTLE NOTLE 3405 +eelx2 MACH_EELX2 EELX2 3406 +moon MACH_MOON MOON 3407 +ruby MACH_RUBY RUBY 3408 +goldengate MACH_GOLDENGATE GOLDENGATE 3409 +ctbu_gen2 MACH_CTBU_GEN2 CTBU_GEN2 3410 +kmp_am17_01 MACH_KMP_AM17_01 KMP_AM17_01 3411 +wtplug MACH_WTPLUG WTPLUG 3412 +mx27su2 MACH_MX27SU2 MX27SU2 3413 +nb31 MACH_NB31 NB31 3414 +hjsdu MACH_HJSDU HJSDU 3415 +td3_rev1 MACH_TD3_REV1 TD3_REV1 3416 +eag_ci4000 MACH_EAG_CI4000 EAG_CI4000 3417 +net5big_nand_v2 MACH_NET5BIG_NAND_V2 NET5BIG_NAND_V2 3418 +cpx2 MACH_CPX2 CPX2 3419 +net2big_nand_v2 MACH_NET2BIG_NAND_V2 NET2BIG_NAND_V2 3420 +ecuv5 MACH_ECUV5 ECUV5 3421 +hsgx6d MACH_HSGX6D HSGX6D 3422 +dawad7 MACH_DAWAD7 DAWAD7 3423 +sam9repeater MACH_SAM9REPEATER SAM9REPEATER 3424 diff --git a/arch/arm/vfp/Makefile b/arch/arm/vfp/Makefile index 39f6d8e1af7..6de73aab019 100644 --- a/arch/arm/vfp/Makefile +++ b/arch/arm/vfp/Makefile @@ -4,8 +4,8 @@ # Copyright (C) 2001 ARM Limited # -# EXTRA_CFLAGS := -DDEBUG -# EXTRA_AFLAGS := -DDEBUG +# ccflags-y := -DDEBUG +# asflags-y := -DDEBUG KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp) LDFLAGS +=--no-warn-mismatch diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index bbf3da012af..f74695075e6 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -78,6 +78,14 @@ static void vfp_thread_exit(struct thread_info *thread) put_cpu(); } +static void vfp_thread_copy(struct thread_info *thread) +{ + struct thread_info *parent = current_thread_info(); + + vfp_sync_hwstate(parent); + thread->vfpstate = parent->vfpstate; +} + /* * When this function is called with the following 'cmd's, the following * is true while this function is being run: @@ -104,12 +112,17 @@ static void vfp_thread_exit(struct thread_info *thread) static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { struct thread_info *thread = v; + u32 fpexc; +#ifdef CONFIG_SMP + unsigned int cpu; +#endif - if (likely(cmd == THREAD_NOTIFY_SWITCH)) { - u32 fpexc = fmrx(FPEXC); + switch (cmd) { + case THREAD_NOTIFY_SWITCH: + fpexc = fmrx(FPEXC); #ifdef CONFIG_SMP - unsigned int cpu = thread->cpu; + cpu = thread->cpu; /* * On SMP, if VFP is enabled, save the old state in @@ -134,13 +147,20 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * old state. */ fmxr(FPEXC, fpexc & ~FPEXC_EN); - return NOTIFY_DONE; - } + break; - if (cmd == THREAD_NOTIFY_FLUSH) + case THREAD_NOTIFY_FLUSH: vfp_thread_flush(thread); - else + break; + + case THREAD_NOTIFY_EXIT: vfp_thread_exit(thread); + break; + + case THREAD_NOTIFY_COPY: + vfp_thread_copy(thread); + break; + } return NOTIFY_DONE; } |