diff options
Diffstat (limited to 'arch/arm')
83 files changed, 1185 insertions, 278 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe..c5f9ae5dbd1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,7 +38,6 @@ config ARM select HARDIRQS_SW_RESEND select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IRQ_PROBE select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) @@ -126,11 +125,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y @@ -2150,6 +2144,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e..bd0cff3f808 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index a874dbfb5ae..e6138310e5c 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -51,11 +51,11 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; ecc@80008000 { - reg = <0x80008000 2000>; + reg = <0x80008000 0x2000>; status = "disabled"; }; @@ -63,7 +63,7 @@ compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; @@ -72,14 +72,14 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <15 14>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; etm@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; status = "disabled"; }; @@ -87,7 +87,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; @@ -273,32 +273,32 @@ }; emi@80020000 { - reg = <0x80020000 2000>; + reg = <0x80020000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; @@ -310,14 +310,14 @@ }; ssp1: ssp@80034000 { - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <2 20>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; tvenc@80038000 { - reg = <0x80038000 2000>; + reg = <0x80038000 0x2000>; status = "disabled"; }; }; @@ -330,37 +330,37 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; status = "disabled"; }; audio-out@80048000 { - reg = <0x80048000 2000>; + reg = <0x80048000 0x2000>; status = "disabled"; }; audio-in@8004c000 { - reg = <0x8004c000 2000>; + reg = <0x8004c000 0x2000>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; @@ -370,26 +370,26 @@ }; i2c@80058000 { - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; status = "disabled"; }; rtc@8005c000 { compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x8005c000 2000>; + reg = <0x8005c000 0x2000>; interrupts = <22>; }; pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; @@ -429,7 +429,7 @@ ranges; usbctrl@80080000 { - reg = <0x80080000 0x10000>; + reg = <0x80080000 0x40000>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index d3f8296e19e..0a8978a40ec 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -27,7 +27,7 @@ status = "okay"; }; - uart@1000a000 { + uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 00bae3aad5a..5303ab680a3 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,12 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; }; avic: avic-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 787efac68da..3fa6d190fab 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -57,18 +57,18 @@ }; hsadc@80002000 { - reg = <0x80002000 2000>; + reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; perfmon@80006000 { - reg = <0x80006000 800>; + reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; @@ -77,7 +77,7 @@ compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; @@ -86,28 +86,28 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { - reg = <0x80012000 2000>; + reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { - reg = <0x80016000 2000>; + reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; @@ -510,96 +510,96 @@ }; digctl@8001c000 { - reg = <0x8001c000 2000>; + reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm@80022000 { - reg = <0x80022000 2000>; + reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif@80030000 { compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; + reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80032000 2000>; + reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg@8003c000 { - reg = <0x8003c000 200>; + reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel@8003c200 { - reg = <0x8003c200 100>; + reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel@8003c300 { - reg = <0x8003c300 100>; + reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel@8003c400 { - reg = <0x8003c400 100>; + reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon@8003c500 { - reg = <0x8003c500 100>; + reg = <0x8003c500 0x100>; status = "disabled"; }; simenet@8003c700 { - reg = <0x8003c700 100>; + reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag@8003c800 { - reg = <0x8003c800 100>; + reg = <0x8003c800 0x100>; status = "disabled"; }; }; @@ -612,45 +612,45 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; spdif@80054000 { - reg = <0x80054000 2000>; + reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; |