diff options
Diffstat (limited to 'arch/arm')
49 files changed, 612 insertions, 182 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fa0cdab2e1d..e9da08483b3 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -242,15 +242,8 @@ all: $(KBUILD_IMAGE) boot := arch/arm/boot -# Update machine arch and proc symlinks if something which affects -# them changed. We use .arch to indicate when they were updated -# last, otherwise make uses the target directory mtime. - -archprepare: maketools - -PHONY += maketools FORCE -maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h +archprepare: + $(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h # Convert bzImage to zImage bzImage: zImage @@ -261,9 +254,6 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -CLEAN_FILES += include/asm-arm/mach-types.h \ - include/asm-arm/arch include/asm-arm/.arch - # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 5a375e5fef2..bc90364a96c 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -308,15 +308,11 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, memcpy(ptr, buf->safe, size); /* - * DMA buffers must have the same cache properties - * as if they were really used for DMA - which means - * data must be written back to RAM. Note that - * we don't use dmac_flush_range() here for the - * bidirectional case because we know the cache - * lines will be coherent with the data written. + * Since we may have written to a page cache page, + * we need to ensure that the data will be coherent + * with user mappings. */ - dmac_clean_range(ptr, ptr + size); - outer_clean_range(__pa(ptr), __pa(ptr) + size); + __cpuc_flush_kernel_dcache_area(ptr, size); } free_safe_buffer(dev->archdata.dmabounce, buf); } diff --git a/arch/arm/include/asm/asm-offsets.h b/arch/arm/include/asm/asm-offsets.h new file mode 100644 index 00000000000..d370ee36a18 --- /dev/null +++ b/arch/arm/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 73eceb87e58..730aefcfbee 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -211,7 +211,7 @@ struct cpu_cache_fns { void (*coherent_kern_range)(unsigned long, unsigned long); void (*coherent_user_range)(unsigned long, unsigned long); - void (*flush_kern_dcache_page)(void *); + void (*flush_kern_dcache_area)(void *, size_t); void (*dma_inv_range)(const void *, const void *); void (*dma_clean_range)(const void *, const void *); @@ -236,7 +236,7 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_flush_user_range cpu_cache.flush_user_range #define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range #define __cpuc_coherent_user_range cpu_cache.coherent_user_range -#define __cpuc_flush_dcache_page cpu_cache.flush_kern_dcache_page +#define __cpuc_flush_dcache_area cpu_cache.flush_kern_dcache_area /* * These are private to the dma-mapping API. Do not use directly. @@ -255,14 +255,14 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) -#define __cpuc_flush_dcache_page __glue(_CACHE,_flush_kern_dcache_page) +#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) extern void __cpuc_flush_kern_all(void); extern void __cpuc_flush_user_all(void); extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); extern void __cpuc_coherent_user_range(unsigned long, unsigned long); -extern void __cpuc_flush_dcache_page(void *); +extern void __cpuc_flush_dcache_area(void *, size_t); /* * These are private to the dma-mapping API. Do not use directly. @@ -448,7 +448,7 @@ static inline void flush_kernel_dcache_page(struct page *page) { /* highmem pages are always flushed upon kunmap already */ if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page)) - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } #define flush_dcache_mmap_lock(mapping) \ @@ -465,13 +465,6 @@ static inline void flush_kernel_dcache_page(struct page *page) */ #define flush_icache_page(vma,page) do { } while (0) -static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, - unsigned offset, size_t size) -{ - const void *start = (void __force *)virt + offset; - dmac_inv_range(start, start + size); -} - /* * flush_cache_vmap() is used when creating mappings (eg, via vmap, * vmalloc, ioremap etc) in kernel space for pages. On non-VIPT diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h new file mode 100644 index 00000000000..948178cc6ba --- /dev/null +++ b/arch/arm/include/asm/mach-types.h @@ -0,0 +1 @@ +#include <generated/mach-types.h> diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 8bf09ae5b34..f6c6196a51f 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -52,6 +52,12 @@ config MACH_OPENRD_BASE Say 'Y' here if you want your kernel to support the Marvell OpenRD Base Board. +config MACH_NETSPACE_V2 + bool "LaCie Network Space v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space v2 NAS. + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 9f2f67b2b63..d4d7f53b0fb 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -8,5 +8,6 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o +obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c new file mode 100644 index 00000000000..9a064065beb --- /dev/null +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -0,0 +1,325 @@ +/* + * arch/arm/mach-kirkwood/netspace_v2-setup.c + * + * LaCie Network Space v2 board setup + * + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/kirkwood.h> +#include <plat/time.h> +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) + ****************************************************************************/ + +static struct mtd_partition netspace_v2_flash_parts[] = { + { + .name = "u-boot", + .size = MTDPART_SIZ_FULL, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, +}; + +static const struct flash_platform_data netspace_v2_flash = { + .type = "mx25l4005a", + .name = "spi_flash", + .parts = netspace_v2_flash_parts, + .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts), +}; + +static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &netspace_v2_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +static struct at24_platform_data at24c04 = { + .byte_len = SZ_4K / 8, + .page_size = 16, +}; + +/* + * i2c addr | chip | description + * 0x50 | HT24LC04 | eeprom (512B) + */ + +static struct i2c_board_info __initdata netspace_v2_i2c_info[] = { + { + I2C_BOARD_INFO("24c04", 0x50), + .platform_data = &at24c04, + } +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data netspace_v2_sata_data = { + .n_ports = 2, +}; + +#define NETSPACE_V2_GPIO_SATA0_POWER 16 +#define NETSPACE_V2_GPIO_SATA1_POWER 17 + +static void __init netspace_v2_sata_power_init(void) +{ + int err; + + err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power"); + if (err == 0) { + err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1); + if (err) + gpio_free(NETSPACE_V2_GPIO_SATA0_POWER); + } + if (err) + pr_err("netspace_v2: failed to setup SATA0 power\n"); +} + +/***************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define NETSPACE_V2_PUSH_BUTTON 32 + +static struct gpio_keys_button netspace_v2_buttons[] = { + [0] = { + .code = KEY_POWER, + .gpio = NETSPACE_V2_PUSH_BUTTON, + .desc = "Power push button", + .active_low = 0, + }, +}; + +static struct gpio_keys_platform_data netspace_v2_button_data = { + .buttons = netspace_v2_buttons, + .nbuttons = ARRAY_SIZE(netspace_v2_buttons), +}; + +static struct platform_device netspace_v2_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &netspace_v2_button_data, + }, +}; + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +/* + * The blue front LED is wired to a CPLD and can blink in relation with the + * SATA activity. + * + * The following array detail the different LED registers and the combination + * of their possible values: + * + * cmd_led | slow_led | /SATA active | LED state + * | | | + * 1 | 0 | x | off + * - | 1 | x | on + * 0 | 0 | 1 | on + * 0 | 0 | 0 | blink (rate 300ms) + */ + +#define NETSPACE_V2_GPIO_RED_LED 12 +#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 +#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 + + +static struct gpio_led netspace_v2_gpio_led_pins[] = { + { + .name = "ns_v2:red:fail", + .gpio = NETSPACE_V2_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data netspace_v2_gpio_leds_data = { + .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins), + .leds = netspace_v2_gpio_led_pins, +}; + +static struct platform_device netspace_v2_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &netspace_v2_gpio_leds_data, + }, +}; + +static void __init netspace_v2_gpio_leds_init(void) +{ + platform_device_register(&netspace_v2_gpio_leds); + + /* + * Configure the front blue LED to blink in relation with the SATA + * activity. + */ + if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, + "SATA blue LED slow") != 0) + return; + if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0) + goto err_free_1; + if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD, + "SATA blue LED command") != 0) + goto err_free_1; + if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0) + goto err_free_2; + + return; + +err_free_2: + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD); +err_free_1: + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW); + pr_err("netspace_v2: failed to configure SATA blue LED\n"); +} + +/***************************************************************************** + * Timer + ****************************************************************************/ + +static void netspace_v2_timer_init(void) +{ + kirkwood_tclk = 166666667; + orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); +} + +struct sys_timer netspace_v2_timer = { + .init = netspace_v2_timer_init, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static unsigned int netspace_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + 0 +}; + +#define NETSPACE_V2_GPIO_POWER_OFF 31 + +static void netspace_v2_power_off(void) +{ + gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1); +} + +static void __init netspace_v2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(netspace_v2_mpp_config); + + netspace_v2_sata_power_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&netspace_v2_ge00_data); + kirkwood_sata_init(&netspace_v2_sata_data); + kirkwood_uart0_init(); + spi_register_board_info(netspace_v2_spi_slave_info, + ARRAY_SIZE(netspace_v2_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_i2c_init(); + i2c_register_board_info(0, netspace_v2_i2c_info, + ARRAY_SIZE(netspace_v2_i2c_info)); + + netspace_v2_gpio_leds_init(); + platform_device_register(&netspace_v2_gpio_buttons); + + if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = netspace_v2_power_off; + else + pr_err("netspace_v2: failed to configure power-off GPIO\n"); +} + +MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netspace_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netspace_v2_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 76c11ee113e..10eafa70a90 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -18,6 +18,7 @@ config ARCH_OMAP2430 config ARCH_OMAP34XX bool "OMAP34xx Based System" depends on ARCH_OMAP3 + select USB_ARCH_HAS_EHCI config ARCH_OMAP3430 bool "OMAP3430 support" diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 1591aae6450..2626a9f8a73 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -29,7 +29,7 @@ #include <linux/gpio.h> #include <linux/i2c/at24.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/regulator/machine.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 44239e3ec02..117b8fd7e3a 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -19,7 +19,7 @@ #include <linux/interrupt.h> #include <linux/regulator/machine.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 18913e96e34..34de1785157 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -26,7 +26,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/usb/otg.h> #include <linux/smsc911x.h> diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index c9e5ebb4d91..fe3d22cb245 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -34,7 +34,7 @@ #include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 17f3c91231d..acafdbc8aa1 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -16,7 +16,7 @@ #include <linux/spi/spi.h> #include <linux/spi/wl12xx.h> #include <linux/i2c.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/regulator/machine.h> diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 258794db488..8dd277c3666 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -14,7 +14,7 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/gpio.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/regulator/machine.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 39b797bc14d..19805a7de06 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -640,12 +640,9 @@ void __init omap_serial_early_init(void) uart->num = i; p->private_data = uart; uart->p = p; - list_add_tail(&uart->node, &uart_list); if (cpu_is_omap44xx()) p->irq += 32; - - omap_uart_enable_clocks(uart); } } @@ -673,9 +670,13 @@ void __init omap_serial_init_port(int port) pdev = &uart->pdev; dev = &pdev->dev; + omap_uart_enable_clocks(uart); + omap_uart_reset(uart); omap_uart_idle_init(uart); + list_add_tail(&uart->node, &uart_list); + if (WARN_ON(platform_device_register(pdev))) return; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index e6d8e10ae5d..8a0837ea029 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -110,6 +110,8 @@ config MACH_CM_X300 bool "CompuLab CM-X300 modules" select PXA3xx select CPU_PXA300 + select CPU_PXA310 + select HAVE_PWM config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" @@ -240,7 +242,6 @@ config MACH_COLIBRI300 select PXA3xx select CPU_PXA300 select CPU_PXA310 - select HAVE_PWM config MACH_COLIBRI320 bool "Toradex Colibri PXA320" diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 3395463bb5a..8e10db148f1 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,7 +4,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <mach/hardware.h> #include <mach/udc.h> #include <mach/pxafb.h> #include <mach/mmc.h> @@ -14,6 +13,7 @@ #include <mach/pxa2xx_spi.h> #include <mach/camera.h> #include <mach/audio.h> +#include <mach/hardware.h> #include <plat/i2c.h> #include <plat/pxa3xx_nand.h> diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h index 193b39d654e..4d9588373aa 100644 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ b/arch/arm/mach-s3c2410/include/mach/spi.h @@ -18,6 +18,8 @@ struct s3c2410_spi_info { unsigned int num_cs; /* total chipselects */ int bus_num; /* bus number to use. */ + unsigned int use_fiq:1; /* use fiq */ + void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S index b63a8f7b95c..a89444a3c01 100644 --- a/arch/arm/mm/cache-fa.S +++ b/ |