diff options
Diffstat (limited to 'arch/arm')
75 files changed, 676 insertions, 295 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..26d45e5b636 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1391,7 +1391,7 @@ config AEABI config OABI_COMPAT bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL + depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL default y help This option preserves the old syscall interface along with the diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index a101f10bb5b..721847dc68a 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -50,6 +50,12 @@ #define SCPCELLID2 0xFF8 #define SCPCELLID3 0xFFC +#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) +#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) + +#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) +#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) + static inline void sysctl_soft_reset(void __iomem *base) { /* writing any value to SCSYSSTAT reg will reset system */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 20e0f7c9e03..d66605dea55 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -95,6 +95,15 @@ static inline void __iomem *__typesafe_io(unsigned long addr) return (void __iomem *)addr; } +/* IO barriers */ +#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE +#define __iormb() rmb() +#define __iowmb() wmb() +#else +#define __iormb() do { } while (0) +#define __iowmb() do { } while (0) +#endif + /* * Now, pick up the machine-defined IO definitions */ @@ -125,17 +134,17 @@ static inline void __iomem *__typesafe_io(unsigned long addr) * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. */ #ifdef __io -#define outb(v,p) __raw_writeb(v,__io(p)) -#define outw(v,p) __raw_writew((__force __u16) \ - cpu_to_le16(v),__io(p)) -#define outl(v,p) __raw_writel((__force __u32) \ - cpu_to_le32(v),__io(p)) +#define outb(v,p) ({ __iowmb(); __raw_writeb(v,__io(p)); }) +#define outw(v,p) ({ __iowmb(); __raw_writew((__force __u16) \ + cpu_to_le16(v),__io(p)); }) +#define outl(v,p) ({ __iowmb(); __raw_writel((__force __u32) \ + cpu_to_le32(v),__io(p)); }) -#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __v; }) +#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __iormb(); __v; }) #define inw(p) ({ __u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__io(p))); __v; }) + __raw_readw(__io(p))); __iormb(); __v; }) #define inl(p) ({ __u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__io(p))); __v; }) + __raw_readl(__io(p))); __iormb(); __v; }) #define outsb(p,d,l) __raw_writesb(__io(p),d,l) #define outsw(p,d,l) __raw_writesw(__io(p),d,l) @@ -192,14 +201,6 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define writel_relaxed(v,c) ((void)__raw_writel((__force u32) \ cpu_to_le32(v),__mem_pci(c))) -#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE -#define __iormb() rmb() -#define __iowmb() wmb() -#else -#define __iormb() do { } while (0) -#define __iowmb() do { } while (0) -#endif - #define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; }) #define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; }) #define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; }) diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 23c2e8e5c0f..d0ee74b7cf8 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -188,7 +188,7 @@ * translation for translating DMA addresses. Use the driver * DMA support - see dma-mapping.h. */ -static inline unsigned long virt_to_phys(void *x) +static inline unsigned long virt_to_phys(const volatile void *x) { return __virt_to_phys((unsigned long)(x)); } diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index f17d9a09e8f..f06ff9feb0d 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -391,25 +391,24 @@ ENDPROC(__turn_mmu_on) #ifdef CONFIG_SMP_ON_UP + __INIT __fixup_smp: - mov r4, #0x00070000 - orr r3, r4, #0xff000000 @ mask 0xff070000 - orr r4, r4, #0x41000000 @ val 0x41070000 - and r0, r9, r3 - teq r0, r4 @ ARM CPU and ARMv6/v7? + and r3, r9, #0x000f0000 @ architecture version + teq r3, #0x000f0000 @ CPU ID supported? bne __fixup_smp_on_up @ no, assume UP - orr r3, r3, #0x0000ff00 - orr r3, r3, #0x000000f0 @ mask 0xff07fff0 + bic r3, r9, #0x00ff0000 + bic r3, r3, #0x0000000f @ mask 0xff00fff0 + mov r4, #0x41000000 orr r4, r4, #0x0000b000 - orr r4, r4, #0x00000020 @ val 0x4107b020 - and r0, r9, r3 - teq r0, r4 @ ARM 11MPCore? + orr r4, r4, #0x00000020 @ val 0x4100b020 + teq r3, r4 @ ARM 11MPCore? moveq pc, lr @ yes, assume SMP mrc p15, 0, r0, c0, c0, 5 @ read MPIDR - tst r0, #1 << 31 - movne pc, lr @ bit 31 => SMP + and r0, r0, #0xc0000000 @ multiprocessing extensions and + teq r0, #0x80000000 @ not part of a uniprocessor system? + moveq pc, lr @ yes, assume SMP __fixup_smp_on_up: adr r0, 1f @@ -417,18 +416,7 @@ __fixup_smp_on_up: sub r3, r0, r3 add r4, r4, r3 add r5, r5, r3 -2: cmp r4, r5 - movhs pc, lr - ldmia r4!, {r0, r6} - ARM( str r6, [r0, r3] ) - THUMB( add r0, r0, r3 ) -#ifdef __ARMEB__ - THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. -#endif - THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords - THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. - THUMB( strh r6, [r0] ) - b 2b + b __do_fixup_smp_on_up ENDPROC(__fixup_smp) .align @@ -442,7 +430,31 @@ smp_on_up: ALT_SMP(.long 1) ALT_UP(.long 0) .popsection +#endif + .text +__do_fixup_smp_on_up: + cmp r4, r5 + movhs pc, lr + ldmia r4!, {r0, r6} + ARM( str r6, [r0, r3] ) + THUMB( add r0, r0, r3 ) +#ifdef __ARMEB__ + THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. #endif + THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords + THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. + THUMB( strh r6, [r0] ) + b __do_fixup_smp_on_up +ENDPROC(__do_fixup_smp_on_up) + +ENTRY(fixup_smp) + stmfd sp!, {r4 - r6, lr} + mov r4, r0 + add r5, r0, r1 + mov r3, #0 + bl __do_fixup_smp_on_up + ldmfd sp!, {r4 - r6, pc} +ENDPROC(fixup_smp) #include "head-common.S" diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index c9f3f046757..d600bd35070 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -137,11 +137,10 @@ static u8 get_debug_arch(void) u32 didr; /* Do we implement the extended CPUID interface? */ - if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { - pr_warning("CPUID feature registers not supported. " - "Assuming v6 debug is present.\n"); + if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf), + "CPUID feature registers not supported. " + "Assuming v6 debug is present.\n")) return ARM_DEBUG_ARCH_V6; - } ARM_DBG_READ(c0, 0, didr); return (didr >> 16) & 0xf; @@ -152,6 +151,12 @@ u8 arch_get_debug_arch(void) return debug_arch; } +static int debug_arch_supported(void) +{ + u8 arch = get_debug_arch(); + return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14; +} + /* Determine number of BRP register available. */ static int get_num_brp_resources(void) { @@ -268,6 +273,9 @@ out: int hw_breakpoint_slots(int type) { + if (!debug_arch_supported()) + return 0; + /* * We can be called early, so don't rely on * our static variables being initialised. @@ -834,11 +842,11 @@ static void reset_ctrl_regs(void *unused) /* * v7 debug contains save and restore registers so that debug state - * can be maintained across low-power modes without leaving - * the debug logic powered up. It is IMPLEMENTATION DEFINED whether - * we can write to the debug registers out of reset, so we must - * unlock the OS Lock Access Register to avoid taking undefined - * instruction exceptions later on. + * can be maintained across low-power modes without leaving the debug + * logic powered up. It is IMPLEMENTATION DEFINED whether we can access + * the debug registers out of reset, so we must unlock the OS Lock + * Access Register to avoid taking undefined instruction exceptions + * later on. */ if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) { /* @@ -882,7 +890,7 @@ static int __init arch_hw_breakpoint_init(void) debug_arch = get_debug_arch(); - if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) { + if (!debug_arch_supported()) { pr_info("debug architecture 0x%x unsupported.\n", debug_arch); return 0; } @@ -899,18 +907,18 @@ static int __init arch_hw_breakpoint_init(void) pr_info("%d breakpoint(s) reserved for watchpoint " "single-step.\n", core_num_reserved_brps); + /* + * Reset the breakpoint resources. We assume that a halting + * debugger will leave the world in a nice state for us. + */ + on_each_cpu(reset_ctrl_regs, NULL, 1); + ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { + max_watchpoint_len = 4; pr_warning("halting debug mode enabled. Assuming maximum " - "watchpoint size of 4 bytes."); + "watchpoint size of %u bytes.", max_watchpoint_len); } else { - /* - * Reset the breakpoint resources. We assume that a halting - * debugger will leave the world in a nice state for us. - */ - smp_call_function(reset_ctrl_regs, NULL, 1); - reset_ctrl_regs(NULL); - /* Work out the maximum supported watchpoint length. */ max_watchpoint_len = get_max_wp_len(); pr_info("maximum watchpoint size is %u bytes.\n", diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 2cfe8161b47..6d4105e6872 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -22,6 +22,7 @@ #include <asm/pgtable.h> #include <asm/sections.h> +#include <asm/smp_plat.h> #include <asm/unwind.h> #ifdef CONFIG_XIP_KERNEL @@ -268,12 +269,28 @@ struct mod_unwind_map { const Elf_Shdr *txt_sec; }; +static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr, + const Elf_Shdr *sechdrs, const char *name) +{ + const Elf_Shdr *s, *se; + const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) + if (strcmp(name, secstrs + s->sh_name) == 0) + return s; + + return NULL; +} + +extern void fixup_smp(const void *, unsigned long); + int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod) { + const Elf_Shdr * __maybe_unused s = NULL; #ifdef CONFIG_ARM_UNWIND const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum; struct mod_unwind_map maps[ARM_SEC_MAX]; int i; @@ -315,6 +332,9 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, maps[i].txt_sec->sh_addr, maps[i].txt_sec->sh_size); #endif + s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); + if (s && !is_smp()) + fixup_smp((void *)s->sh_addr, s->sh_size); return 0; } diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5efa2647a2f..d150ad1ccb5 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -700,7 +700,7 @@ user_backtrace(struct frame_tail __user *tail, * Frame pointers should strictly progress back up the stack * (towards higher addresses). */ - if (tail >= buftail.fp) + if (tail + 1 >= buftail.fp) return NULL; return buftail.fp - 1; diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index fd9156698ab..60636f499cb 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -36,6 +36,7 @@ static void twd_set_mode(enum clock_event_mode mode, /* timer load already set up */ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; + __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: /* period set, and timer enabled in 'next_event' hook */ @@ -81,7 +82,7 @@ int twd_timer_ack(void) static void __cpuinit twd_calibrate_rate(void) { - unsigned long load, count; + unsigned long count; u64 waitjiffies; /* @@ -116,10 +117,6 @@ static void __cpuinit twd_calibrate_rate(void) printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, (twd_timer_rate / 1000000) % 100); } - - load = twd_timer_rate / HZ; - - __raw_writel(load, twd_base + TWD_TIMER_LOAD); } /* diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index ffdf87be295..82079545adc 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -838,7 +838,7 @@ EXPORT_SYMBOL(ep93xx_i2s_release); static struct resource ep93xx_ac97_resources[] = { { .start = EP93XX_AAC_PHYS_BASE, - .end = EP93XX_AAC_PHYS_BASE + 0xb0 - 1, + .end = EP93XX_AAC_PHYS_BASE + 0xac - 1, .flags = IORESOURCE_MEM, }, { diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index f3dc76fdcea..bec34b83495 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -427,6 +427,13 @@ void __init ep93xx_gpio_init(void) { int i; + /* Set Ports C, D, E, G, and H for GPIO use */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | + EP93XX_SYSCON_DEVCFG_GONK | + EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); + for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) gpiochip_add(&ep93xx_gpio_banks[i].chip); } diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 3c9e0c40c67..30b971d6581 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -17,8 +17,8 @@ /* For NetWinder debugging */ .macro addruart, rp, rv mov \rp, #0x000003f8 - orr \rv, \rp, #0x7c000000 @ physical - orr \rp, \rp, #0xff000000 @ virtual + orr \rv, \rp, #0xff000000 @ virtual + orr \rp, \rp, #0x7c000000 @ physical .endm #define UART_SHIFT 0 diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index aa76cfd9f34..8382e790207 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -180,7 +180,7 @@ static const uint32_t mx25pdk_keymap[] = { KEY(3, 3, KEY_POWER), }; -static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = { +static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = { .keymap = mx25pdk_keymap, .keymap_size = ARRAY_SIZE(mx25pdk_keymap), }; diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 4dc68d6bb6b..9fd894271d5 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -432,7 +432,7 @@ static struct clocksource clocksource_ixp4xx = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -unsigned long ixp4xx_timer_freq = FREQ; +unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { @@ -496,7 +496,7 @@ static struct clock_event_device clockevent_ixp4xx = { static void __init ixp4xx_clockevent_init(void) { - clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC, + clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC, clockevent_ixp4xx.shift); clockevent_ixp4xx.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx); diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h index 2c3f93c3eb7..c9e930f2933 100644 --- a/arch/arm/mach-ixp4xx/include/mach/timex.h +++ b/arch/arm/mach-ixp4xx/include/mach/timex.h @@ -10,6 +10,7 @@ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the * timer register ignores the bottom 2 bits of the LATCH value. */ -#define FREQ 66666000 -#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) +#define IXP4XX_TIMER_FREQ 66666000 +#define CLOCK_TICK_RATE \ + (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index bfdbe4b5a3c..852f7c9f87d 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -265,6 +265,11 @@ void qmgr_release_queue(unsigned int queue) qmgr_queue_descs[queue], queue); qmgr_queue_descs[queue][0] = '\x0'; #endif + + while ((addr = qmgr_get_entry(queue))) + printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", + queue, addr); + __raw_writel(0, &qmgr_regs->sram[queue]); used_sram_bitmap[0] &= ~mask[0]; @@ -275,10 +280,6 @@ void qmgr_release_queue(unsigned int queue) spin_unlock_irq(&qmgr_lock); module_put(THIS_MODULE); - - while ((addr = qmgr_get_entry(queue))) - printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", - queue, addr); } static int qmgr_init(void) diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index b1a362ebfde..ca72a05ed9c 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -304,7 +304,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ @@ -347,7 +347,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 56312c092a9..fd1c4c54b8e 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -355,12 +355,12 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } else { \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ for (i = 10000; i; i--) \ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ @@ -483,7 +483,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ @@ -609,7 +609,6 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c index e7d2269cf70..a7093c88e6a 100644 --- a/arch/arm/mach-mxs/clock.c +++ b/arch/arm/mach-mxs/clock.c @@ -57,7 +57,6 @@ static void __clk_disable(struct clk *clk) if (clk->disable) clk->disable(clk); __clk_disable(clk->parent); - __clk_disable(clk->secondary); } } @@ -68,7 +67,6 @@ static int __clk_enable(struct clk *clk) if (clk->usecount++ == 0) { __clk_enable(clk->parent); - __clk_enable(clk->secondary); if (clk->enable) clk->enable(clk); diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index d7ad7a61366..cb0c0e83a52 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -139,6 +139,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq); u32 gpio_irq_no_base = port->virtual_irq_start; + desc->irq_data.chip->irq_ack(&desc->irq_data); + irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & __raw_readl(port->base + PINCTRL_IRQEN(port->id)); diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h index 041e276d8a3..592c9ab5d76 100644 --- a/arch/arm/mach-mxs/include/mach/clock.h +++ b/arch/arm/mach-mxs/include/mach/clock.h @@ -29,8 +29,6 @@ struct clk { int id; /* Source clock this clk depends on */ struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; /* Reference count of clock enable/disable */ __s8 usecount; /* Register bit position for clock's enable/disable control. */ diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index c9be6d4d83e..bfb4fb1d738 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -14,19 +14,6 @@ #include <mach/irqs.h> #include <asm/hardware/gic.h> -/* - * We use __glue to avoid errors with multiple definitions of - * .globl omap_irq_flags as it's included from entry-armv.S but not - * from entry-common.S. - */ -#ifdef __glue - .pushsection .data - .globl omap_irq_flags -omap_irq_flags: - .word 0 - .popsection -#endif - .macro disable_fiq .endm diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 47701584df3..731dd33bff5 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -57,6 +57,7 @@ struct omap_irq_bank { unsigned long wake_enable; }; +u32 omap_irq_flags; static unsigned int irq_bank_count; static struct omap_irq_bank *irq_banks; @@ -176,7 +177,6 @@ static struct irq_chip omap_irq_chip = { void __init omap_init_irq(void) { - extern unsigned int omap_irq_flags; int i, j; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index c9088d85da0..453809359ba 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -37,7 +37,7 @@ int omap_lcd_dma_running(void) * On OMAP1510, internal LCD controller will start the transfer * when it gets enabled, so assume DMA running if LCD enabled. */ - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) return 1; @@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); void omap_set_lcd_dma_b1_rotation(int rotate) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); BUG(); return; @@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); void omap_set_lcd_dma_b1_mirror(int mirror) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); BUG(); } @@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA virtual resulotion is not supported " "in 1510 mode\n"); BUG(); @@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); BUG(); } @@ -177,7 +177,7 @@ static void set_b1_regs(void) bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); /* 1510 DMA requires the bottom address to be 2 more * than the actual last memory access location. */ - if (cpu_is_omap1510() && + if (cpu_is_omap15xx() && lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) bottom += 2; ei = PIXSTEP(0, 0, 1, 0); @@ -241,7 +241,7 @@ static void set_b1_regs(void) return; /* Suppress warning about uninitialized vars */ } - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); @@ -343,7 +343,7 @@ void omap_free_lcd_dma(void) BUG(); return; } - if (!cpu_is_omap1510()) + if (!cpu_is_omap15xx()) omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR); lcd_dma.reserved = 0; @@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void) * connected. Otherwise the OMAP internal controller will * start the transfer when it gets enabled. */ - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CTRL); @@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma); void omap_setup_lcd_dma(void) { BUG_ON(lcd_dma.active); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { /* Set some reasonable defaults */ omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); } set_b1_regs(); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { u16 w; w = omap_readw(OMAP1610_DMA_LCD_CCR); @@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void) u16 w; lcd_dma.active = 0; - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CCR); diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index f83fc335c61..6885d2fac18 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -44,7 +44,6 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> -#include <linux/sched.h> #include <asm/system.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e906e05bb41..9a2a31e011c 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = { static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) { - twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); - if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value_cansleep(dssdev->reset_gpio, 1); return 0; @@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + omap_mux_init_gpio(29, OMAP_PIN_INPUT); /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* gpio + 1 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + 1; - gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN"); - /* Disable until needed */ - gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0); + /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ + devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; + ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + if (ret < 0) { + devkit8000_lcd_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); + } /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; - gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown"); - /* Disable until needed */ - gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0); + ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + if (ret < 0) { + devkit8000_dvi_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); + } return 0; } diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e001a048dc0..e944025d5ef 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -409,8 +409,6 @@ static void __init omap4_panda_init(void) platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); - /* OMAP4 Panda uses internal transceiver so register nop transceiver */ - usb_nop_xceiv_register(); omap4_ehci_init(); usb_musb_init(&musb_board_data); } diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index cb77be7ac44..39a71bb8a30 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = { static struct regulator_init_data rm680_vemmc = { .constraints = { .name = "rm680_vemmc", - .min_uV = 2900000, - .max_uV = 2900000, - .apply_uV = 1, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_STATUS diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index d2f15f5cfd3..34922b2d2e3 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -264,7 +264,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) if (IS_ERR(od)) { pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, name, oh->name); - return IS_ERR(od); + return PTR_ERR(od); } mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0); diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index befa321c4c1..81985a665cb 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -38,20 +38,6 @@ */ #ifdef MULTI_OMAP2 - -/* - * We use __glue to avoid errors with multiple definitions of - * .globl omap_irq_base as it's included from entry-armv.S but not - * from entry-common.S. - */ -#ifdef __glue - .pushsection .data - .globl omap_irq_base -omap_irq_base: - .word 0 - .popsection -#endif - /* * Configure the interrupt base on the first interrupt. * See also omap_irq_base_init for setting omap_irq_base. diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e66687b0b9d..c2032041d26 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -314,14 +314,13 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } +void __iomem *omap_irq_base; + /* * Initialize asm_irq_base for entry-macro.S */ static inline void omap_irq_base_init(void) { - extern void __iomem *omap_irq_base; - -#ifdef MULTI_OMAP2 if (cpu_is_omap24xx()) omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE); else if (cpu_is_omap34xx()) @@ -330,7 +329,6 @@ static inline void omap_irq_base_init(void) omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE); else pr_err("Could not initialize omap_irq_base\n"); -#endif } void __init omap2_init_common_infrastructure(void) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index df8d2f2872c..98148b6c36e 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -160,7 +160,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, struct omap_mux *mux = NULL; struct omap_mux_entry *e; const char *mode_name; - int found = 0, found_mode, mode0_len = 0; + int found = 0, found_mode = 0, mode0_len = 0; struct list_head *muxmodes = &partition->muxmodes; mode_name = strchr(muxname, '.'); @@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags, if (!partition->base) { pr_err("%s: Could not ioremap mux partition at 0x%08x\n", __func__, partition->phys); + kfree(partition); return -ENODEV; } diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 9e5dc8ed51e..97feb3ab6a6 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void) /* Block console output in case it is on one of the OMAP UARTs */ if (!is_suspending()) - if (try_acquire_console_sem()) + if (!console_trylock()) goto no_sleep; omap_uart_prepare_idle(0); @@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(0); if (!is_suspending()) - release_console_sem(); + console_unlock(); no_sleep: if (omap2_pm_debug) { diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 8cbbeade4b8..2f864e4b085 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -168,9 +168,10 @@ static void omap3_core_restore_context(void) * once during boot sequence, but this works as we are not using secure * services. */ -static void omap3_save_secure_ram_context(u32 target_mpu_state) +static void omap3_save_secure_ram_context(void) { u32 ret; + int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { /* @@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state) pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); ret = _omap_save_secure_sram((u32 *) __pa(omap3_secure_ram_storage)); - pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state); + pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { printk(KERN_ERR "save_secure_sram() returns %08x\n", @@ -398,7 +399,7 @@ void omap_sram_idle(void) if (!is_suspending()) if (per_next_state < PWRDM_POWER_ON || core_next_state < PWRDM_POWER_ON) - if (try_acquire_console_sem()) + if (!console_trylock()) goto console_still_active; /* PER */ @@ -481,7 +482,7 @@ void omap_sram_idle(void) } if (!is_suspending()) - release_console_sem(); + console_unlock(); console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ @@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void) local_fiq_disable(); omap_dma_global_context_save(); - omap3_save_secure_ram_context(PWRDM_POWER_ON); + omap3_save_secure_ram_context(); omap_dma_global_context_restore(); local_irq_enable(); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 302da7403a1..32e91a9c8b6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) oh->dev_attr = uart; - acquire_console_sem(); /* in case the earlycon is on the UART */ + console_lock(); /* in case the earlycon is on the UART */ /* * Because of early UART probing, UART did not get idled @@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; - release_console_sem(); + console_unlock(); if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 77ecebf3fae..c37e823266d 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -780,8 +780,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -795,8 +794,7 @@ static int omap_sr_autocomp_store(void *data, u64 val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -834,7 +832,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return -EINVAL; + ret = -EINVAL; + goto err_free_devinfo; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -966,7 +965,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) } sr_info = _sr_lookup(pdata->voltdm); - if (!sr_info) { + if (IS_ERR(sr_info)) { dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", __func__); return -EINVAL; diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index ed6079c94c5..12be525b8df 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) strcat(name, vdd->voltdm.name); vdd->debug_dir = debugfs_create_dir(name, voltage_dir); + kfree(name); if (IS_ERR(vdd->debug_dir)) { pr_warning("%s: Unable to create debugfs directory for" " vdd_%s\n", __func__, vdd->voltdm.name); diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 6b2c800a113..28f667e52ef 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -50,7 +50,7 @@ static void __init colibri_mmc_init(void) GPIO0_COLIBRI_PXA270_SD_DETECT; if (machine_is_colibri300()) /* PXA300 Colibri */ colibri_mci_platform_data.gpio_card_detect = - GPIO39_COLIBRI_PXA300_SD_DETECT; + GPIO13_COLIBRI_PXA300_SD_DETECT; else /* PXA320 Colibri */ colibri_mci_platform_data.gpio_card_detect = GPIO28_COLIBRI_PXA320_SD_DETECT; diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index fddb16d07eb..66dd81cbc8a 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -41,7 +41,7 @@ static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = { GPIO4_MMC1_DAT1, GPIO5_MMC1_DAT2, GPIO6_MMC1_DAT3, - GPIO39_GPIO, /* SD detect */ + GPIO13_GPIO, /* GPIO13_COLIBRI_PXA300_SD_DETECT */ /* UHC */ GPIO0_2_USBH_PEN, diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 388a96f1ef9..cb4236e98a0 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -60,7 +60,7 @@ static inline void colibri_pxa3xx_init_nand(void) {} #define GPIO113_COLIBRI_PXA270_TS_IRQ 113 /* GPIO definitions for Colibri PXA300/310 */ -#define GPIO39_COLIBRI_PXA300_SD_DETECT 39 +#define GPIO13_COLIBRI_PXA300_SD_DETECT 13 /* GPIO definitions for Colibri PXA320 */ #define GPIO28_COLIBRI_PXA320_SD_DETECT 28 diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 405b92a2979..35572c427fa 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -323,7 +323,7 @@ static struct platform_pwm_backlight_data palm27x_backlight_data = { .pwm_id = 0, .max_brightness = 0xfe, .dft_brightness = 0x7e, - .pwm_period_ns = 3500, + .pwm_period_ns = 3500 * 1024, .init = palm27x_backlight_init, .notify = palm27x_backlight_notify, .exit = palm27x_backlight_exit, diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 978e1b28954..1807c9abdde 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -33,7 +33,7 @@ int pxa_pm_enter(suspend_state_t state) #endif /* skip registers saving for standby */ - if (state != PM_SUSPEND_STANDBY) { + if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) { pxa_cpu_pm_fns->save(sleep_save); /* before sleeping, calculate and save a checksum */ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) @@ -44,7 +44,7 @@ int pxa_pm_enter(suspend_state_t state) pxa_cpu_pm_fns->enter(state); cpu_init(); - if (state != PM_SUSPEND_STANDBY) { + if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) { /* after sleeping, validate the checksum */ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) checksum += sleep_save[i]; diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index b4575ae9648..7ca138a943a 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -2,52 +2,56 @@ menu "RealView platform type" depends on ARCH_REALVIEW config MACH_REALVIEW_EB - bool "Support RealView/EB platform" + bool "Support RealView(R) Emulation Baseboard" select ARM_GIC help - Include support for the ARM(R) RealView Emulation Baseboard platform. + Include support for the ARM(R) RealView(R) Emulation Baseboard + platform. config REALVIEW_EB_A9MP - bool "Support Multicore Cortex-A9" + bool "Support Multicore Cortex-A9 Tile" depends on MACH_REALVIEW_EB select CPU_V7 help - Enable support for the Cortex-A9MPCore tile on the Realview platform. + Enable support for the Cortex-A9MPCore tile fitted to the + Realview(R) Emulation Baseboard platform. config REALVIEW_EB_ARM11MP - bool "Support ARM11MPCore tile" + bool "Support ARM11MPCore Tile" depends on MACH_REALVIEW_EB select CPU_V6 select ARCH_HAS_BARRIERS if SMP help - Enable support for the ARM11MPCore tile on the Realview platform. + Enable support for the ARM11MPCore tile fitted to the Realview(R) + Emulation Baseboard platform. config REALVIEW_EB_ARM11MP_REVB - bool "Support ARM11MPCore RevB tile" + bool "Support ARM11MPCore RevB Tile" depends on REALVIEW_EB_ARM11MP help - Enable support for the ARM11MPCore RevB tile on the Realview - platform. Since there are device address differences, a - kernel built with this option enabled is not compatible with - other revisions of the ARM11MPCore tile. + Enable support for the ARM11MPCore Revision B tile on the + Realview(R) Emulation Baseboard platform. Since there are device + address differences, a kernel built with this option enabled is + not compatible with other revisions of the ARM11MPCore tile. config MACH_REALVIEW_PB11MP - bool "Support RealView/PB11MPCore platform" + bool "Support RealView(R) Platform Baseboard for ARM11MPCore" select CPU_V6 select ARM_GIC select HAVE_PATA_PLATFORM select ARCH_HAS_BARRIERS if SMP help - Include support for the ARM(R) RealView MPCore Platform Baseboard. - PB11MPCore is a platform with an on-board ARM11MPCore and has + Include support for the ARM(R) RealView(R) Platform Baseboard for + the ARM11MPCore. This platform has an on-board ARM11MPCore and has support for PCI-E and Compact Flash. config MACH_REALVIEW_PB1176 - bool "Support RealView/PB1176 platform" + bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" select CPU_V6 select ARM_GIC help - Include support for the ARM(R) RealView ARM1176 Platform Baseboard. + Include support for the ARM(R) RealView(R) Platform Baseboard for + ARM1176JZF-S. config REALVIEW_PB1176_SECURE_FLASH bool "Allow access to the secure flash memory block" @@ -59,23 +63,24 @@ config REALVIEW_PB1176_SECURE_FLASH block (64MB @ 0x3c000000) is required. config MACH_REALVIEW_PBA8 - bool "Support RealView/PB-A8 platform" + bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" select CPU_V7 select ARM_GIC select HAVE_PATA_PLATFORM help - Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard. - PB-A8 is a platform with an on-board Cortex-A8 and has support for - PCI-E and Compact Flash. + Include support for the ARM(R) RealView Platform Baseboard for + Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has + support for PCI-E and Compact Flash. config MACH_REALVIEW_PBX - bool "Support RealView/PBX platform" + bool "Support RealView(R) Platform Baseboard Explore" select ARM_GIC select HAVE_PATA_PLATFORM select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ZONE_DMA if SPARSEMEM help - Include support for the ARM(R) RealView PBX platform. + Include support for the ARM(R) RealView(R) Platform Baseboard + Explore. config REALVIEW_HIGH_PHYS_OFFSET bool "High physical base address for the RealView platform" diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index a22bf67f2f7..6959d13d908 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -41,7 +41,7 @@ volatile int __cpuinitdata pen_release = -1; * observers, irrespective of whether they're taking part in coherency * or not. This is necessary for the hotplug code to work reliably. */ -static void write_pen_release(int val) +static void __cpuinit write_pen_release(int val) { pen_release = val; smp_wmb(); diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig index 09c4c21b70c..b2a9acc5185 100644 --- a/arch/arm/mach-s5pv310/Kconfig +++ b/arch/arm/mach-s5pv310/Kconfig @@ -122,6 +122,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S5PV310_DEV_PD + select S5PV310_DEV_SYSMMU select S5PV310_SETUP_I2C1 select S5PV310_SETUP_SDHCI help diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 74d400625a2..3060f78e12a 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -124,8 +124,6 @@ #define S5PV310_PA_SYSMMU_TV 0x12E20000 #define S5PV310_PA_SYSMMU_MFC_L 0x13620000 #define S5PV310_PA_SYSMMU_MFC_R 0x13630000 -#define S5PV310_SYSMMU_TOTAL_IPNUM 16 -#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM /* compatibiltiy defines. */ #define S3C_PA_UART S5PV310_PA_UART diff --git a/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/arch/arm/mach-s5pv310/include/mach/sysmmu.h index 662fe85ff4d..598fc5c9211 100644 --- a/arch/arm/mach-s5pv310/include/mach/sysmmu.h +++ b/arch/arm/mach-s5pv310/include/mach/sysmmu.h @@ -13,6 +13,9 @@ #ifndef __ASM_ARM_ARCH_SYSMMU_H #define __ASM_ARM_ARCH_SYSMMU_H __FILE__ +#define S5PV310_SYSMMU_TOTAL_IPNUM 16 +#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM + enum s5pv310_sysmmu_ips { SYSMMU_MDMA, SYSMMU_SSS, @@ -32,7 +35,7 @@ enum s5pv310_sysmmu_ips { SYSMMU_MFC_R, }; -static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = { +static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = { "SYSMMU_MDMA" , "SYSMMU_SSS" , "SYSMMU_FIMC0" , diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index d43c5ef58eb..bd3e1bfdd6a 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -241,6 +241,9 @@ static struct locomo_platform_data locomo_info = { struct platform_device collie_locomo_device = { .name = "locomo", .id = 0, + .dev = { + .platform_data = &locomo_info, + }, .num_resources = ARRAY_SIZE(locomo_resources), .resource = locomo_resources, }; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 4d1b4c5c938..0c8f6cf3e94 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -60,6 +60,8 @@ endchoice config MACH_AG5EVM bool "AG5EVM board" + select ARCH_REQUIRE_GPIOLIB + select SH_LCD_MIPI_DSI depends on ARCH_SH73A0 config MACH_MACKEREL diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index c18a740a415..2123b96b563 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -34,9 +34,10 @@ #include <linux/input/sh_keysc.h> #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> - +#include <linux/sh_clk.h> +#include <video/sh_mobile_lcdc.h> +#include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> - #include <mach/hardware.h> #include <mach/sh73a0.h> #include <mach/common.h> @@ -183,11 +184,165 @@ static struct platform_device mmc_device = { .resource = sh_mmcif_resources, }; +/* IrDA */ +static struct resource irda_resources[] = { + [0] = { + .start = 0xE6D00000, + .end = 0xE6D01FD4 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(95), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device irda_device = { + .name = "sh_irda", + .id = 0, + .resource = irda_resources, + .num_resources = ARRAY_SIZE(irda_resources), +}; + +static unsigned char lcd_backlight_seq[3][2] = { + { 0x04, 0x07 }, + { 0x23, 0x80 }, + { 0x03, 0x01 }, +}; + +static void lcd_backlight_on(void) +{ + struct i2c_adapter *a; + struct i2c_msg msg; + int k; + + a = i2c_get_adapter(1); + for (k = 0; a && k < 3; k++) { + msg.addr = 0x6d; + msg.buf = &lcd_backlight_seq[k][0]; + msg.len = 2; + msg.flags = 0; + if (i2c_transfer(a, &msg, 1) != 1) + break; + } +} + +static void lcd_backlight_reset(void) +{ + gpio_set_value(GPIO_PORT235, 0); + mdelay(24); + gpio_set_value(GPIO_PORT235, 1); +} + +static void lcd_on(void *board_data, struct fb_info *info) +{ + lcd_backlight_on(); +} + +static void lcd_off(void *board_data) +{ + lcd_backlight_reset(); +} + +/* LCDC0 */ +static const struct fb_videomode lcdc0_modes[] = { + { + .name = "R63302(QHD)", + .xres = 544, + .yres = 961, + .left_margin = 72, + .right_margin = 600, + .hsync_len = 16, + .upper_margin = 8, + .lower_margin = 8, + .vsync_len = 2, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, +}; + +static struct sh_mobile_lcdc_info lcdc0_info = { + .clock_source = LCDC_CLK_PERIPHERAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .lcd_size_cfg.width = 44, + .lcd_size_cfg.height = 79, + .bpp = 16, + .lcd_cfg = lcdc0_modes, + .num_cfg = ARRAY_SIZE(lcdc0_modes), + .board_cfg = { + .display_on = lcd_on, + .display_off = lcd_off, + }, + } +}; + +static struct resource lcdc0_resources[] = { + [0] = { + .name = "LCDC0", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe943fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x580), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc0_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc0_resources), + .resource = lcdc0_resources, + .id = 0, + .dev = { + .platform_data = &lcdc0_info, + .coherent_dma_mask = ~0, + }, +}; + +/* MIPI-DSI */ +static struct resource mipidsi0_resources[] = { + [0] = { + .start = 0xfeab0000, + .end = 0xfeab3fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0xfeab4000, + .end = 0xfeab7fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct sh_mipi_dsi_info mipidsi0_info = { + .data_format = MIPI_RGB888, + .lcd_chan = &lcdc0_info.ch[0], + .vsynw_offset = 20, + .clksrc = 1, + .flags = SH_MIPI_DSI_HSABM, +}; + +static struct platform_device mipidsi0_device = { + .name = "sh-mipi-dsi", + .num_resources = ARRAY_SIZE(mipidsi0_resources), + .resource = mipidsi0_resources, + .id = 0, + .dev = { + .platform_data = &mipidsi0_info, + }, +}; + static struct platform_device *ag5evm_devices[] __initdata = { ð_device, &keysc_device, &fsi_device, &mmc_device, + &irda_device, + &lcdc0_device, + &mipidsi0_device, }; static struct map_desc ag5evm_io_desc[] __initdata = { @@ -224,6 +379,8 @@ void __init ag5evm_init_irq(void) __raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A); } +#define DSI0PHYCR 0xe615006c + static void __init ag5evm_init(void) { sh73a0_pinmux_init(); @@ -287,6 +444,25 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_FSIAISLD, NULL); gpio_request(GPIO_FN_FSIAOSLD, NULL); + /* IrDA */ + gpio_request(GPIO_FN_PORT241_IRDA_OUT, NULL); + gpio_request(GPIO_FN_PORT242_IRDA_IN, NULL); + gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL); + + /* LCD panel */ + gpio_request(GPIO_PORT217, NULL); /* RESET */ + gpio_direction_output(GPIO_PORT217, 0); + mdelay(1); + gpio_set_value(GPIO_PORT217, 1); + + /* LCD backlight controller */ + gpio_request(GPIO_PORT235, NULL); /* RESET */ + gpio_direction_output(GPIO_PORT235, 0); + lcd_backlight_reset(); + + /* MIPI-DSI clock setup */ + __raw_writel(0x2a809010, DSI0PHYCR); + #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff); diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index 686b304a770..ef4613b993a 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -347,7 +347,6 @@ static void __init g3evm_init(void) gpio_request(GPIO_FN_IRDA_OUT, NULL); gpio_request(GPIO_FN_IRDA_IN, NULL); gpio_request(GPIO_FN_IRDA_FIRSEL, NULL); - set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW); sh7367_add_standard_devices(); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7b15d21f0f6..fb4213a4e15 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -169,9 +169,8 @@ * SW1 | SW33 * | bit1 | bit2 | bit3 | bit4 * -------------+------+------+------+------- - * MMC0 OFF | OFF | ON | ON | X - * MMC1 ON | OFF | ON | X | ON - * SDHI1 OFF | ON | X | OFF | ON + * MMC0 OFF | OFF | X | ON | X (Use MMCIF) + * SDHI1 OFF | ON | X | OFF | X (Use MFD_SH_MOBILE_SDHI) * */ diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 9aa8d68d1a9..e9731b5a73e 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -234,7 +234,9 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate) value = __raw_readl(PLLC2CR) & ~(0x3f << 24); - __raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR); + __raw_writel(value | ((idx + 19) << 24), PLLC2CR); + + clk->rate = clk->freq_table[idx].frequency; return 0; } diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 720a71433be..ddd4a1b775f 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -118,8 +118,16 @@ static unsigned long pll_recalc(struct clk *clk) { unsigned long mult = 1; - if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) + if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) { mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1); + /* handle CFG bit for PLL1 and PLL2 */ + switch (clk->enable_bit) { + case 1: + case 2: + if (__raw_readl(clk->enable_reg) & (1 << 20)) + mult *= 2; + } + } return clk->parent->rate * mult; } @@ -212,7 +220,7 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2, static struct clk div4_clks[DIV4_NR] = { [DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT), [DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT), - [DIV4_M3] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT), + [DIV4_M3] = DIV4(FRQCRA, 12, 0xfff, CLK_ENABLE_ON_INIT), [DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT), [DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0), [DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0), @@ -255,10 +263,10 @@ static struct clk div6_clks[DIV6_NR] = { }; enum { MSTP001, - MSTP125, MSTP116, + MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP323, MSTP312, + MSTP331, MSTP329, MSTP325, MSTP323, MSTP312, MSTP411, MSTP410, MSTP403, MSTP_NR }; @@ -268,7 +276,9 @@ enum { MSTP001, static struct clk mstp_clks[MSTP_NR] = { [MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */ [MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */ + [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */ [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */ + [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ @@ -279,6 +289,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ + [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ @@ -288,16 +299,25 @@ static struct clk mstp_clks[MSTP_NR] = { #define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } +#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("r_clk", &r_clk), + /* DIV6 clocks */ + CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), + CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), + CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), + CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ + CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ + CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ @@ -308,6 +328,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ + CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index f78a1ead71a..ca5f9d17b39 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -365,6 +365,7 @@ static struct intc_desc intca_desc __initdata = { enum { UNUSED_INTCS = 0, + ENABLED_INTCS, INTCS, @@ -413,7 +414,7 @@ enum { CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, - /* MFIS2 */ + MFIS2_INTCS, /* Priority always enabled using ENABLED_INTCS */ CPORTS2R, /* CEC */ JPU6E, @@ -477,7 +478,7 @@ static struct intc_vect intcs_vectors[] = { INTCS_VECT(CMT4, 0x1980), INTCS_VECT(DSITX1_DSITX1_0, 0x19a0), INTCS_VECT(DSITX1_DSITX1_1, 0x19c0), - /* MFIS2 */ + INTCS_VECT(MFIS2_INTCS, 0x1a00), INTCS_VECT(CPORTS2R, 0x1a20), /* CEC */ INTCS_VECT(JPU6E, 0x1a80), @@ -543,7 +544,7 @@ static struct intc_mask_reg intcs_mask_registers[] = { { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0, CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } }, { 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */ - { 0, CPORTS2R, 0, 0, + { MFIS2_INTCS, CPORTS2R, 0, 0, JPU6E, 0, 0, 0 } }, { 0xffd20104, 0, 16, /* INTAMASK */ { 0, 0, 0, 0, 0, 0, 0, 0, @@ -571,7 +572,8 @@ static struct intc_prio_reg intcs_prio_registers[] = { { 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } }, { 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } }, - { 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0, CPORTS2R, 0, 0 } }, + { 0xffd50038, 0, 16, 4, /* IPROS3 */ { ENABLED_INTCS, CPORTS2R, + 0, 0 } }, { 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } }, }; @@ -590,6 +592,7 @@ static struct resource intcs_resources[] __initdata = { static struct intc_desc intcs_desc __initdata = { .name = "sh7372-intcs", + .force_enable = ENABLED_INTCS, .resource = intcs_resources, .num_resources = ARRAY_SIZE(intcs_resources), .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 322d8d57cbc..5d0e1503ece 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -252,10 +252,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id) void __init sh73a0_init_irq(void) { - void __iomem *gic_base = __io(0xf0001000); + void __iomem *gic_dist_base = __io(0xf0001000); + void __iomem *gic_cpu_base = __io(0xf0000100); void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); - gic_init(0, 29, gic_base, gic_base); + gic_init(0, 29, gic_dist_base, gic_cpu_base); register_intc_controller(&intcs_desc); diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c index bd066206e11..ad804880151 100644 --- a/arch/arm/mach-tegra/gpio.c +++ b/arch/arm/mach-tegra/gpio.c @@ -207,9 +207,9 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) spin_unlock_irqrestore(&bank->lvl_lock[port], flags); if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __set_irq_handler_unlocked(irq, handle_level_irq); + __set_irq_handler_unlocked(d->irq, handle_level_irq); else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __set_irq_handler_unlocked(irq, handle_edge_irq); + __set_irq_handler_unlocked(d->irq, handle_edge_irq); return 0; } diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h index d7723955dac..a217f68ba57 100644 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ b/arch/arm/mach-tegra/include/mach/clk.h @@ -20,6 +20,8 @@ #ifndef __MACH_CLK_H #define __MACH_CLK_H +struct clk; + void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); diff --git a/arch/arm/mach-tegra/include/mach/clkdev.h b/arch/arm/mach-tegra/include/mach/clkdev.h index 412f5c63e65..66cd3f4fc89 100644 --- a/arch/arm/mach-tegra/include/mach/clkdev.h +++ b/arch/arm/mach-tegra/include/mach/clkdev.h @@ -20,6 +20,8 @@ #ifndef __MACH_CLKDEV_H #define __MACH_CLKDEV_H +struct clk; + static inline int __clk_get(struct clk *clk) { return 1; diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h new file mode 100644 index 00000000000..66ad2760c62 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/kbc.h @@ -0,0 +1,61 @@ +/* + * Platform definitions for tegra-kbc keyboard input driver + * + * Copyright (c) 2010-2011, NVIDIA Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef ASMARM_ARCH_TEGRA_KBC_H +#define ASMARM_ARCH_TEGRA_KBC_H + +#include <linux/types.h> +#include <linux/input/matrix_keypad.h> + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +#define KBC_MAX_GPIO 24 +#define KBC_MAX_KPENT 8 +#else +#define KBC_MAX_GPIO 20 +#define KBC_MAX_KPENT 7 +#endif + +#define KBC_MAX_ROW 16 +#define KBC_MAX_COL 8 +#define KBC_MAX_KEY (KBC_MAX_ROW * KBC_MAX_COL) + +struct tegra_kbc_pin_cfg { + bool is_row; + unsigned char num; +}; + +struct tegra_kbc_wake_key { + u8 row:4; + u8 col:4; +}; + +struct tegra_kbc_platform_data { + unsigned int debounce_cnt; + unsigned int repeat_cnt; + + unsigned int wake_cnt; /* 0:wake on any key >1:wake on wake_cfg */ + const struct tegra_kbc_wake_key *wake_cfg; + + struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO]; + const struct matrix_keymap_data *keymap_data; + + bool wakeup; +}; +#endif diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index de7dfad6f76..17c74d21077 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -46,24 +46,24 @@ #define ICTLR_COP_IER_CLR 0x38 #define ICTLR_COP_IEP_CLASS 0x3c -static void (*gic_mask_irq)(struct irq_data *d); -static void (*gic_unmask_irq)(struct irq_data *d); +static void (*tegra_gic_mask_irq)(struct irq_data *d); +static void (*tegra_gic_unmask_irq)(struct irq_data *d); -#define irq_to_ictlr(irq) (((irq)-32) >> 5) +#define irq_to_ictlr(irq) (((irq) - 32) >> 5) static void __iomem *tegra_ictlr_base = IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE); -#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr)*0x100) +#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr) * 0x100) static void tegra_mask(struct irq_data *d) { void __iomem *addr = ictlr_to_virt(irq_to_ictlr(d->irq)); - gic_mask_irq(d); - writel(1<<(d->irq&31), addr+ICTLR_CPU_IER_CLR); + tegra_gic_mask_irq(d); + writel(1 << (d->irq & 31), addr+ICTLR_CPU_IER_CLR); } static void tegra_unmask(struct irq_data *d) { void __iomem *addr = ictlr_to_virt(irq_to_ictlr(d->irq)); - gic_unmask_irq(d); + tegra_gic_unmask_irq(d); writel(1<<(d->irq&31), addr+ICTLR_CPU_IER_SET); } @@ -98,8 +98,8 @@ void __init tegra_init_irq(void) IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); gic = get_irq_chip(29); - gic_unmask_irq = gic->irq_unmask; - gic_mask_irq = gic->irq_mask; + tegra_gic_unmask_irq = gic->irq_unmask; + tegra_gic_mask_irq = gic->irq_mask; tegra_irq.irq_ack = gic->irq_ack; #ifdef CONFIG_SMP tegra_irq.irq_set_affinity = gic->irq_set_affinity; diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index 3f7b5e9d83c..9cdec5aa04a 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -2,17 +2,19 @@ menu "Versatile platform type" depends on ARCH_VERSATILE config ARCH_VERSATILE_PB - bool "Support Versatile/PB platform" + bool "Support Versatile Platform Baseboard for ARM926EJ-S" select CPU_ARM926T select MIGHT_HAVE_PCI default y help - Include support for the ARM(R) Versatile/PB platform. + Include support for the ARM(R) Versatile Platform Baseboard + for the ARM926EJ-S. config MACH_VERSATILE_AB - bool "Support Versatile/AB platform" + bool "Support Versatile Application Baseboard for ARM926EJ-S" select CPU_ARM926T help - Include support for the ARM(R) Versatile/AP platform. + Include support for the ARM(R) Versatile Application Baseboard + for the ARM926EJ-S. endmenu diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index b1687b6abe6..634bf1d3a31 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -39,7 +39,7 @@ volatile int __cpuinitdata pen_release = -1; * observers, irrespective of whether they're taking part in coherency * or not. This is necessary for the hotplug code to work reliably. */ -static void write_pen_release(int val) +static void __cpuinit write_pen_release(int val) { pen_release = val; smp_wmb(); diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index a9ed3428a2f..1edae65a0e7 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -19,6 +19,7 @@ #include <asm/mach/time.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> +#include <asm/hardware/sp810.h> #include <mach/motherboard.h> @@ -50,8 +51,16 @@ void __init v2m_map_io(struct map_desc *tile, size_t num) static void __init v2m_timer_init(void) { + u32 scctrl; + versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); + /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ + scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL)); + scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; + scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK; + writel(scctrl, MMIO_P2V(V2M_SYSCTL + SCCTRL)); + writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 9d30c6f804b..e4509bae8fc 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -405,7 +405,7 @@ config CPU_V6 config CPU_32v6K bool "Support ARM V6K processor extensions" if !SMP depends on CPU_V6 || CPU_V7 - default y if SMP && !(ARCH_MX3 || ARCH_OMAP2) + default y if SMP help Say Y here if your ARMv6 processor supports the 'K' extension. This enables the kernel to use some instructions not present @@ -416,7 +416,7 @@ config CPU_32v6K # ARMv7 config CPU_V7 bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX - select CPU_32v6K if !ARCH_OMAP2 + select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 select CPU_PABRT_V7 @@ -644,7 +644,7 @@ config ARM_THUMBEE config SWP_EMULATE bool "Emulate SWP/SWPB instructions" - depends on CPU_V7 && !CPU_V6 + depends on !CPU_USE_DOMAINS && CPU_V7 && !CPU_V6 select HAVE_PROC_CPU if PROC_FS default y if SMP help diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 5164069ced4..cddd684364d 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -297,6 +297,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) memblock_reserve(__pa(_stext), _end - _stext); #endif #ifdef CONFIG_BLK_DEV_INITRD + if (phys_initrd_size && + memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) { + pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n", + phys_initrd_start, phys_initrd_size); + phys_initrd_start = phys_initrd_size = 0; + } if (phys_initrd_size) { memblock_reserve(phys_initrd_start, phys_initrd_size); diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 8aa974491df..c074e66ad22 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -10,8 +10,6 @@ */ #include <linux/cpumask.h> -#include <linux/err.h> -#include <linux/errno.h> #include <linux/init.h> #include <linux/mutex.h> #include <linux/oprofile.h> @@ -46,6 +44,7 @@ char *op_name_from_perf_id(void) return NULL; } } +#endif static int report_trace(struct stackframe *frame, void *d) { @@ -85,7 +84,7 @@ static struct frame_tail* user_backtrace(struct frame_tail *tail) /* frame pointers should strictly progress back up the stack * (towards higher addresses) */ - if (tail >= buftail[0].fp) + if (tail + 1 >= buftail[0].fp) return NULL; return buftail[0].fp-1; @@ -111,6 +110,7 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth) int __init oprofile_arch_init(struct oprofile_operations *ops) { + /* provide backtrace support also in timer mode: */ ops->backtrace = arm_backtrace; return oprofile_perf_init(ops); @@ -120,11 +120,3 @@ void __exit oprofile_arch_exit(void) { oprofile_perf_exit(); } -#else -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - pr_info("oprofile: hardware counters not available\n"); - return -ENODEV; -} -void __exit oprofile_arch_exit(void) {} -#endif /* CONFIG_HW_PERF_EVENTS */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 3a70ebf0477..ff469c4f1d7 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -95,6 +95,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX35_3DS: case MACH_TYPE_PCM043: case MACH_TYPE_LILLY1131: + case MACH_TYPE_VPR200: uart_base = MX3X_UART1_BASE_ADDR; break; case MACH_TYPE_MAGX_ZN5: @@ -102,6 +103,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) break; case MACH_TYPE_MX51_BABBAGE: case MACH_TYPE_EUKREA_CPUIMX51SD: + case MACH_TYPE_MX51_3DS: uart_base = MX51_UART1_BASE_ADDR; break; case MACH_TYPE_MX50_RDP: diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index b77e018d36c..a9aa5ad3f4e 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -139,10 +139,11 @@ static const unsigned long mfpr_edge[] = { #define mfp_configured(p) ((p)->config != -1) /* - * perform a read-back of any MFPR register to make sure the + * perform a read-back of any valid MFPR register to make sure the * previous writings are finished */ -#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) +static unsigned long mfpr_off_readback; +#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + mfpr_off_readback) static inline void __mfp_config_run(struct mfp_pin *p) { @@ -248,6 +249,9 @@ void __init mfp_init_addr(struct mfp_addr_map *map) spin_lock_irqsave(&mfp_spin_lock, flags); + /* mfp offset for readback */ + mfpr_off_readback = map[0].offset; + for (p = map; p->start != MFP_PIN_INVALID; p++) { offset = p->offset; i = p->start; diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index deb39951a22..557f8c507f6 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -37,6 +37,14 @@ config S5P_GPIO_INT help Common code for the GPIO interrupts (other than external interrupts.) +comment "System MMU" + +config S5P_SYSTEM_MMU + bool "S5P SYSTEM MMU" + depends on ARCH_S5PV310 + help + Say Y here if you want to enable System MMU + config S5P_DEV_FIMC0 bool help @@ -66,19 +74,3 @@ config S5P_DEV_CSIS1 bool help Compile in platform device definitions for MIPI-CSIS channel 1 - -menuconfig S5P_SYSMMU - bool "SYSMMU support" - depends on ARCH_S5PV310 - help - This is a System MMU driver for Samsung ARM based Soc. - -if S5P_SYSMMU - -config S5P_SYSMMU_DEBUG - bool "Enables debug messages" - depends on S5P_SYSMMU - help - This enables SYSMMU driver debug massages. - -endif diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 92efe1adcfd..4bd5cf90897 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -19,6 +19,7 @@ obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o +obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o @@ -30,4 +31,3 @@ obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o -obj-$(CONFIG_S5P_SYSMMU) += sysmmu.o diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h deleted file mode 100644 index db298fc5438..00000000000 --- a/arch/arm/plat-s5p/include/plat/sysmmu.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Samsung sysmmu driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_SYSMMU_H -#define __ASM_PLAT_S5P_SYSMMU_H __FILE__ - -/* debug macro */ -#ifdef CONFIG_S5P_SYSMMU_DEBUG -#define sysmmu_debug(fmt, arg...) printk(KERN_INFO "[%s] " fmt, __func__, ## arg) -#else -#define sysmmu_debug(fmt, arg...) do { } while (0) -#endif - -#endif /* __ASM_PLAT_S5P_SYSMMU_H */ diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index d804914dc2e..ffe8a48bc3c 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -16,8 +16,6 @@ #include <mach/regs-sysmmu.h> #include <mach/sysmmu.h> -#include <plat/sysmmu.h> - struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM]; void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp) @@ -123,7 +121,7 @@ static int s5p_sysmmu_set_tablebase(sysmmu_ips ips) : "=r" (pg) : : "cc"); \ pg &= ~0x3fff; - sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg); + printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg); /* Set sysmmu page table base address */ __raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR); diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index d9025e37767..30518cc9a67 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -17,6 +17,8 @@ #include <linux/irq.h> +struct sys_device; + #ifdef CONFIG_PM extern __init int s3c_pm_init(void); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 2fea897ebeb..9d6feaabbe7 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sun Dec 12 23:24:27 2010 +# Last update: Mon Feb 7 08:59:27 2011 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2240,7 +2240,7 @@ arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 vs_v210 MACH_VS_V210 VS_V210 2252 vs_v212 MACH_VS_V212 VS_V212 2253 hmt MACH_HMT HMT 2254 -suen3 MACH_SUEN3 SUEN3 2255 +km_kirkwood MACH_KM_KIRKWOOD KM_KIRKWOOD 2255 vesper MACH_VESPER VESPER 2256 str9 MACH_STR9 STR9 2257 omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 @@ -2987,7 +2987,7 @@ pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001 ea20 MACH_EA20 EA20 3002 awm2 MACH_AWM2 AWM2 3003 ti8148evm MACH_TI8148EVM TI8148EVM 3004 -tegra_seaboard MACH_TEGRA_SEABOARD TEGRA_SEABOARD 3005 +seaboard MACH_SEABOARD SEABOARD 3005 linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006 tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007 rubys MACH_RUBYS RUBYS 3008 @@ -3190,7 +3190,7 @@ synergy MACH_SYNERGY SYNERGY 3205 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 punica MACH_PUNICA PUNICA 3208 -sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209 +trimslice MACH_TRIMSLICE TRIMSLICE 3209 mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210 mackerel MACH_MACKEREL MACKEREL 3211 fa9x27 MACH_FA9X27 FA9X27 3213 @@ -3219,3 +3219,100 @@ pivicc MACH_PIVICC PIVICC 3235 pcm048 MACH_PCM048 PCM048 3236 dds MACH_DDS DDS 3237 chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238 +ts48xx MACH_TS48XX TS48XX 3239 +tonga2_tfttimer MACH_TONGA2_TFTTIMER TONGA2_TFTTIMER 3240 +whistler MACH_WHISTLER WHISTLER 3241 +asl_phoenix MACH_ASL_PHOENIX ASL_PHOENIX 3242 +at91sam9263otlite MACH_AT91SAM9263OTLITE AT91SAM9263OTLITE 3243 +ddplug MACH_DDPLUG DDPLUG 3244 +d2plug MACH_D2PLUG D2PLUG 3245 +kzm9d MACH_KZM9D KZM9D 3246 +verdi_lte MACH_VERDI_LTE VERDI_LTE 3247 +nanozoom MACH_NANOZOOM NANOZOOM 3248 +dm3730_som_lv MACH_DM3730_SOM_LV DM3730_SOM_LV 3249 +dm3730_torpedo MACH_DM3730_TORPEDO DM3730_TORPEDO 3250 +anchovy MACH_ANCHOVY ANCHOVY 3251 +re2rev20 MACH_RE2REV20 RE2REV20 3253 +re2rev21 MACH_RE2REV21 RE2REV21 3254 +cns21xx MACH_CNS21XX CNS21XX 3255 +rider MACH_RIDER RIDER 3257 +nsk330 MACH_NSK330 NSK330 3258 +cns2133evb MACH_CNS2133EVB CNS2133EVB 3259 +z3_816x_mod MACH_Z3_816X_MOD Z3_816X_MOD 3260 +z3_814x_mod MACH_Z3_814X_MOD Z3_814X_MOD 3261 +beect MACH_BEECT BEECT 3262 +dma_thunderbug MACH_DMA_THUNDERBUG DMA_THUNDERBUG 3263 +omn_at91sam9g20 MACH_OMN_AT91SAM9G20 OMN_AT91SAM9G20 3264 +mx25_e2s_uc MACH_MX25_E2S_UC MX25_E2S_UC 3265 +mione MACH_MIONE MIONE 3266 +top9000_tcu MACH_TOP9000_TCU TOP9000_TCU 3267 +top9000_bsl MACH_TOP9000_BSL TOP9000_BSL 3268 +kingdom MACH_KINGDOM KINGDOM 3269 +armadillo460 MACH_ARMADILLO460 ARMADILLO460 3270 +lq2 MACH_LQ2 LQ2 3271 +sweda_tms2 MACH_SWEDA_TMS2 SWEDA_TMS2 3272 +mx53_loco MACH_MX53_LOCO MX53_LOCO 3273 +acer_a8 MACH_ACER_A8 ACER_A8 3275 +acer_gauguin MACH_ACER_GAUGUIN ACER_GAUGUIN 3276 +guppy MACH_GUPPY GUPPY 3277 +mx61_ard MACH_MX61_ARD MX61_ARD 3278 +tx53 MACH_TX53 TX53 3279 +omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 +uemd MACH_UEMD UEMD 3281 +ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 +rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 +nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +hkdkc100 MACH_HKDKC100 HKDKC100 3285 +ts42xx MACH_TS42XX TS42XX 3286 +aebl MACH_AEBL AEBL 3287 +wario MACH_WARIO WARIO 3288 +gfs_spm MACH_GFS_SPM GFS_SPM 3289 +cm_t3730 MACH_CM_T3730 CM_T3730 3290 +isc3 MACH_ISC3 ISC3 3291 +rascal MACH_RASCAL RASCAL 3292 +hrefv60 MACH_HREFV60 HREFV60 3293 +tpt_2_0 MACH_TPT_2_0 TPT_2_0 3294 +pyramid_td MACH_PYRAMID_TD PYRAMID_TD 3295 +splendor MACH_SPLENDOR SPLENDOR 3296 +guf_planet MACH_GUF_PLANET GUF_PLANET 3297 +msm8x60_qt MACH_MSM8X60_QT MSM8X60_QT 3298 +htc_hd_mini MACH_HTC_HD_MINI HTC_HD_MINI 3299 +athene MACH_ATHENE ATHENE 3300 +deep_r_ek_1 MACH_DEEP_R_EK_1 DEEP_R_EK_1 3301 +vivow_ct MACH_VIVOW_CT VIVOW_CT 3302 +nery_1000 MACH_NERY_1000 NERY_1000 3303 +rfl109145_ssrv MACH_RFL109145_SSRV RFL109145_SSRV 3304 +nmh MACH_NMH NMH 3305 +wn802t MACH_WN802T WN802T 3306 +dragonet MACH_DRAGONET DRAGONET 3307 +geneva_b MACH_GENEVA_B GENEVA_B 3308 +at91sam9263desk16l MACH_AT91SAM9263DESK16L AT91SAM9263DESK16L 3309 +bcmhana_sv MACH_BCMHANA_SV BCMHANA_SV 3310 +bcmhana_tablet MACH_BCMHANA_TABLET BCMHANA_TABLET 3311 +koi MACH_KOI KOI 3312 +ts4800 MACH_TS4800 TS4800 3313 +tqma9263 MACH_TQMA9263 TQMA9263 3314 +holiday MACH_HOLIDAY HOLIDAY 3315 +dma_6410 MACH_DMA6410 DMA6410 3316 +pcats_overlay MACH_PCATS_OVERLAY PCATS_OVERLAY 3317 +hwgw6410 MACH_HWGW6410 HWGW6410 3318 +shenzhou MACH_SHENZHOU SHENZHOU 3319 +cwme9210 MACH_CWME9210 CWME9210 3320 +cwme9210js MACH_CWME9210JS CWME9210JS 3321 +pgs_v1 MACH_PGS_SITARA PGS_SITARA 3322 +colibri_tegra2 MACH_COLIBRI_TEGRA2 COLIBRI_TEGRA2 3323 +w21 MACH_W21 W21 3324 +polysat1 MACH_POLYSAT1 POLYSAT1 3325 +dataway MACH_DATAWAY DATAWAY 3326 +cobral138 MACH_COBRAL138 COBRAL138 3327 +roverpcs8 MACH_ROVERPCS8 ROVERPCS8 3328 +marvelc MACH_MARVELC MARVELC 3329 +navefihid MACH_NAVEFIHID NAVEFIHID 3330 +dm365_cv100 MACH_DM365_CV100 DM365_CV100 3331 +able MACH_ABLE ABLE 3332 +legacy MACH_LEGACY LEGACY 3333 +icong MACH_ICONG ICONG 3334 +rover_g8 MACH_ROVER_G8 ROVER_G8 3335 +t5388p MACH_T5388P T5388P 3336 +dingo MACH_DINGO DINGO 3337 +goflexhome MACH_GOFLEXHOME GOFLEXHOME 3338 |