diff options
Diffstat (limited to 'arch/arm/vfp/vfphw.S')
| -rw-r--r-- | arch/arm/vfp/vfphw.S | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S new file mode 100644 index 00000000000..de4ca1223c5 --- /dev/null +++ b/arch/arm/vfp/vfphw.S @@ -0,0 +1,215 @@ +/* + * linux/arch/arm/vfp/vfphw.S + * + * Copyright (C) 2004 ARM Limited. + * Written by Deep Blue Solutions Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This code is called from the kernel's undefined instruction trap. + * r9 holds the return address for successful handling. + * lr holds the return address for unrecognised instructions. + * r10 points at the start of the private FP workspace in the thread structure + * sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h) + */ +#include <asm/thread_info.h> +#include <asm/vfpmacros.h> +#include "../kernel/entry-header.S" + + .macro DBGSTR, str +#ifdef DEBUG + stmfd sp!, {r0-r3, ip, lr} + add r0, pc, #4 + bl printk + b 1f + .asciz "<7>VFP: \str\n" + .balign 4 +1: ldmfd sp!, {r0-r3, ip, lr} +#endif + .endm + + .macro DBGSTR1, str, arg +#ifdef DEBUG + stmfd sp!, {r0-r3, ip, lr} + mov r1, \arg + add r0, pc, #4 + bl printk + b 1f + .asciz "<7>VFP: \str\n" + .balign 4 +1: ldmfd sp!, {r0-r3, ip, lr} +#endif + .endm + + .macro DBGSTR3, str, arg1, arg2, arg3 +#ifdef DEBUG + stmfd sp!, {r0-r3, ip, lr} + mov r3, \arg3 + mov r2, \arg2 + mov r1, \arg1 + add r0, pc, #4 + bl printk + b 1f + .asciz "<7>VFP: \str\n" + .balign 4 +1: ldmfd sp!, {r0-r3, ip, lr} +#endif + .endm + + +@ VFP hardware support entry point. +@ +@ r0 = faulted instruction +@ r2 = faulted PC+4 +@ r9 = successful return +@ r10 = vfp_state union +@ lr = failure return + + .globl vfp_support_entry +vfp_support_entry: + DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10 + + VFPFMRX r1, FPEXC @ Is the VFP enabled? + DBGSTR1 "fpexc %08x", r1 + tst r1, #FPEXC_ENABLE + bne look_for_VFP_exceptions @ VFP is already enabled + + DBGSTR1 "enable %x", r10 + ldr r3, last_VFP_context_address + orr r1, r1, #FPEXC_ENABLE @ user FPEXC has the enable bit set + ldr r4, [r3] @ last_VFP_context pointer + bic r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled + cmp r4, r10 + beq check_for_exception @ we are returning to the same + @ process, so the registers are + @ still there. In this case, we do + @ not want to drop a pending exception. + + VFPFMXR FPEXC, r5 @ enable VFP, disable any pending + @ exceptions, so we can get at the + @ rest of it + + @ Save out the current registers to the old thread state + + DBGSTR1 "save old state %p", r4 + cmp r4, #0 + beq no_old_VFP_process + VFPFMRX r5, FPSCR @ current status + VFPFMRX r6, FPINST @ FPINST (always there, rev0 onwards) + tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read? + VFPFMRX r8, FPINST2, NE @ FPINST2 if needed - avoids reading + @ nonexistant reg on rev0 + VFPFSTMIA r4 @ save the working registers + add r4, r4, #8*16+4 + stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 + @ and point r4 at the word at the + @ start of the register dump + +no_old_VFP_process: + DBGSTR1 "load state %p", r10 + str r10, [r3] @ update the last_VFP_context pointer + @ Load the saved state back into the VFP + add r4, r10, #8*16+4 + ldmia r4, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2 + VFPFLDMIA r10 @ reload the working registers while + @ FPEXC is in a safe state + tst r1, #FPEXC_FPV2 @ is there an FPINST2 to write? + VFPFMXR FPINST2, r8, NE @ FPINST2 if needed - avoids writing + @ nonexistant reg on rev0 + VFPFMXR FPINST, r6 + VFPFMXR FPSCR, r5 @ restore status + +check_for_exception: + tst r1, #FPEXC_EXCEPTION + bne process_exception @ might as well handle the pending + @ exception before retrying branch + @ out before setting an FPEXC that + @ stops us reading stuff + VFPFMXR FPEXC, r1 @ restore FPEXC last + sub r2, r2, #4 + str r2, [sp, #S_PC] @ retry the instruction + mov pc, r9 @ we think we have handled things + + +look_for_VFP_exceptions: + tst r1, #FPEXC_EXCEPTION + bne process_exception + VFPFMRX r5, FPSCR + tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EXCEPTION ! + bne process_exception + + @ Fall into hand on to next handler - appropriate coproc instr + @ not recognised by VFP + + DBGSTR "not VFP" + mov pc, lr + +process_exception: + DBGSTR "bounce" + sub r2, r2, #4 + str r2, [sp, #S_PC] @ retry the instruction on exit from + @ the imprecise exception handling in + @ the support code + mov r2, sp @ nothing stacked - regdump is at TOS + mov lr, r9 @ setup for a return to the user code. + + @ Now call the C code to package up the bounce to the support code + @ r0 holds the trigger instruction + @ r1 holds the FPEXC value + @ r2 pointer to register dump + b VFP9_bounce @ we have handled this - the support + @ code will raise an exception if + @ required. If not, the user code will + @ retry the faulted instruction + +last_VFP_context_address: + .word last_VFP_context + + .globl vfp_get_float +vfp_get_float: + add pc, pc, r0, lsl #3 + mov r0, r0 + .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0 + mov pc, lr + mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1 + mov pc, lr + .endr + + .globl vfp_put_float +vfp_put_float: + add pc, pc, r0, lsl #3 + mov r0, r0 + .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + mcr p10, 0, r1, c\dr, c0, 0 @ fmsr r0, s0 + mov pc, lr + mcr p10, 0, r1, c\dr, c0, 4 @ fmsr r0, s1 + mov pc, lr + .endr + + .globl vfp_get_double +vfp_get_double: + mov r0, r0, lsr #1 + add pc, pc, r0, lsl #3 + mov r0, r0 + .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + mrrc p10, 1, r0, r1, c\dr @ fmrrd r0, r1, d\dr + mov pc, lr + .endr + + @ virtual register 16 for compare with zero + mov r0, #0 + mov r1, #0 + mov pc, lr + + .globl vfp_put_double +vfp_put_double: + mov r0, r0, lsr #1 + add pc, pc, r0, lsl #3 + mov r0, r0 + .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + mcrr p10, 1, r1, r2, c\dr @ fmrrd r1, r2, d\dr + mov pc, lr + .endr |