diff options
Diffstat (limited to 'arch/arm/plat-samsung')
| -rw-r--r-- | arch/arm/plat-samsung/Kconfig | 12 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/Makefile | 8 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/devs.c | 60 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/dma-ops.c | 76 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/cpu.h | 4 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/devs.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/dma-ops.h | 20 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/fb.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/gpio-cfg.h | 2 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/pd.h | 30 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/s3c64xx-spi.h | 39 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/pd.c | 95 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/pwm.c | 4 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/s3c-dma-ops.c | 39 |
14 files changed, 121 insertions, 270 deletions
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index a2fae4ea093..7aca31c1df1 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -78,6 +78,10 @@ config S5P_HRT # clock options +config SAMSUNG_CLOCK + bool + default y if !COMMON_CLK + config SAMSUNG_CLKSRC bool help @@ -491,14 +495,6 @@ config S5P_SLEEP Internal config node to apply common S5P sleep management code. Can be selected by S5P and newer SoCs with similar sleep procedure. -comment "Power Domain" - -config SAMSUNG_PD - bool "Samsung Power Domain" - depends on PM_RUNTIME - help - Say Y here if you want to control Power Domain by Runtime PM. - config DEBUG_S3C_UART depends on PLAT_SAMSUNG int diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 860b2db4db1..b7871749667 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -15,8 +15,8 @@ obj-y += init.o cpu.o obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-$(CONFIG_S5P_HRT) += s5p-time.o -obj-y += clock.o -obj-y += pwm-clock.o +obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o +obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o obj-$(CONFIG_S5P_CLOCK) += s5p-clock.o @@ -60,10 +60,6 @@ obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o -# PD support - -obj-$(CONFIG_SAMSUNG_PD) += pd.o - # PWM support obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 6303974c2ee..74e31ce3553 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1513,7 +1513,7 @@ static struct resource s3c64xx_spi0_resource[] = { }; struct platform_device s3c64xx_device_spi0 = { - .name = "s3c64xx-spi", + .name = "s3c6410-spi", .id = 0, .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource), .resource = s3c64xx_spi0_resource, @@ -1523,13 +1523,10 @@ struct platform_device s3c64xx_device_spi0 = { }, }; -void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs) +void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs) { - if (!pd) { - pr_err("%s:Need to pass platform data\n", __func__); - return; - } + struct s3c64xx_spi_info pd; /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0) { @@ -1537,12 +1534,11 @@ void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, return; } - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - if (!pd->cfg_gpio) - pd->cfg_gpio = s3c64xx_spi0_cfg_gpio; + pd.num_cs = num_cs; + pd.src_clk_nr = src_clk_nr; + pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; - s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0); + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); } #endif /* CONFIG_S3C64XX_DEV_SPI0 */ @@ -1555,7 +1551,7 @@ static struct resource s3c64xx_spi1_resource[] = { }; struct platform_device s3c64xx_device_spi1 = { - .name = "s3c64xx-spi", + .name = "s3c6410-spi", .id = 1, .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource), .resource = s3c64xx_spi1_resource, @@ -1565,26 +1561,20 @@ struct platform_device s3c64xx_device_spi1 = { }, }; -void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs) +void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs) { - if (!pd) { - pr_err("%s:Need to pass platform data\n", __func__); - return; - } - /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0) { pr_err("%s: Invalid SPI configuration\n", __func__); return; } - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - if (!pd->cfg_gpio) - pd->cfg_gpio = s3c64xx_spi1_cfg_gpio; + pd.num_cs = num_cs; + pd.src_clk_nr = src_clk_nr; + pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; - s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1); + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } #endif /* CONFIG_S3C64XX_DEV_SPI1 */ @@ -1597,7 +1587,7 @@ static struct resource s3c64xx_spi2_resource[] = { }; struct platform_device s3c64xx_device_spi2 = { - .name = "s3c64xx-spi", + .name = "s3c6410-spi", .id = 2, .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource), .resource = s3c64xx_spi2_resource, @@ -1607,13 +1597,10 @@ struct platform_device s3c64xx_device_spi2 = { }, }; -void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs) +void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs) { - if (!pd) { - pr_err("%s:Need to pass platform data\n", __func__); - return; - } + struct s3c64xx_spi_info pd; /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0) { @@ -1621,11 +1608,10 @@ void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, return; } - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - if (!pd->cfg_gpio) - pd->cfg_gpio = s3c64xx_spi2_cfg_gpio; + pd.num_cs = num_cs; + pd.src_clk_nr = src_clk_nr; + pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; - s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2); + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); } #endif /* CONFIG_S3C64XX_DEV_SPI2 */ diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index eb9f4f53400..c38d7548924 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -19,72 +19,79 @@ #include <mach/dma.h> static unsigned samsung_dmadev_request(enum dma_ch dma_ch, - struct samsung_dma_info *info) + struct samsung_dma_req *param) { - struct dma_chan *chan; dma_cap_mask_t mask; - struct dma_slave_config slave_config; void *filter_param; dma_cap_zero(mask); - dma_cap_set(info->cap, mask); + dma_cap_set(param->cap, mask); /* * If a dma channel property of a device node from device tree is * specified, use that as the fliter parameter. */ - filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop : - (void *)dma_ch; - chan = dma_request_channel(mask, pl330_filter, filter_param); + filter_param = (dma_ch == DMACH_DT_PROP) ? + (void *)param->dt_dmach_prop : (void *)dma_ch; + return (unsigned)dma_request_channel(mask, pl330_filter, filter_param); +} + +static int samsung_dmadev_release(unsigned ch, void *param) +{ + dma_release_channel((struct dma_chan *)ch); - if (info->direction == DMA_DEV_TO_MEM) { + return 0; +} + +static int samsung_dmadev_config(unsigned ch, + struct samsung_dma_config *param) +{ + struct dma_chan *chan = (struct dma_chan *)ch; + struct dma_slave_config slave_config; + + if (param->direction == DMA_DEV_TO_MEM) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); - slave_config.direction = info->direction; - slave_config.src_addr = info->fifo; - slave_config.src_addr_width = info->width; + slave_config.direction = param->direction; + slave_config.src_addr = param->fifo; + slave_config.src_addr_width = param->width; slave_config.src_maxburst = 1; dmaengine_slave_config(chan, &slave_config); - } else if (info->direction == DMA_MEM_TO_DEV) { + } else if (param->direction == DMA_MEM_TO_DEV) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); - slave_config.direction = info->direction; - slave_config.dst_addr = info->fifo; - slave_config.dst_addr_width = info->width; + slave_config.direction = param->direction; + slave_config.dst_addr = param->fifo; + slave_config.dst_addr_width = param->width; slave_config.dst_maxburst = 1; dmaengine_slave_config(chan, &slave_config); + } else { + pr_warn("unsupported direction\n"); + return -EINVAL; } - return (unsigned)chan; -} - -static int samsung_dmadev_release(unsigned ch, - struct s3c2410_dma_client *client) -{ - dma_release_channel((struct dma_chan *)ch); - return 0; } static int samsung_dmadev_prepare(unsigned ch, - struct samsung_dma_prep_info *info) + struct samsung_dma_prep *param) { struct scatterlist sg; struct dma_chan *chan = (struct dma_chan *)ch; struct dma_async_tx_descriptor *desc; - switch (info->cap) { + switch (param->cap) { case DMA_SLAVE: sg_init_table(&sg, 1); - sg_dma_len(&sg) = info->len; - sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)), - info->len, offset_in_page(info->buf)); - sg_dma_address(&sg) = info->buf; + sg_dma_len(&sg) = param->len; + sg_set_page(&sg, pfn_to_page(PFN_DOWN(param->buf)), + param->len, offset_in_page(param->buf)); + sg_dma_address(&sg) = param->buf; desc = dmaengine_prep_slave_sg(chan, - &sg, 1, info->direction, DMA_PREP_INTERRUPT); + &sg, 1, param->direction, DMA_PREP_INTERRUPT); break; case DMA_CYCLIC: - desc = dmaengine_prep_dma_cyclic(chan, - info->buf, info->len, info->period, info->direction); + desc = dmaengine_prep_dma_cyclic(chan, param->buf, + param->len, param->period, param->direction); break; default: dev_err(&chan->dev->device, "unsupported format\n"); @@ -96,8 +103,8 @@ static int samsung_dmadev_prepare(unsigned ch, return -EFAULT; } - desc->callback = info->fp; - desc->callback_param = info->fp_param; + desc->callback = param->fp; + desc->callback_param = param->fp_param; dmaengine_submit((struct dma_async_tx_descriptor *)desc); @@ -119,6 +126,7 @@ static inline int samsung_dmadev_flush(unsigned ch) static struct samsung_dma_ops dmadev_ops = { .request = samsung_dmadev_request, .release = samsung_dmadev_release, + .config = samsung_dmadev_config, .prepare = samsung_dmadev_prepare, .trigger = samsung_dmadev_trigger, .started = NULL, diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 0721293fad6..ace4451b765 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -132,6 +132,10 @@ IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } +#ifndef KHZ +#define KHZ (1000) +#endif + #ifndef MHZ #define MHZ (1000*1000) #endif diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 61ca2f356c5..5da4b4f38f4 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -131,7 +131,6 @@ extern struct platform_device exynos4_device_ohci; extern struct platform_device exynos4_device_pcm0; extern struct platform_device exynos4_device_pcm1; extern struct platform_device exynos4_device_pcm2; -extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos_device_drm; diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 71a6827c770..f5144cdd300 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -16,7 +16,13 @@ #include <linux/dmaengine.h> #include <mach/dma.h> -struct samsung_dma_prep_info { +struct samsung_dma_req { + enum dma_transaction_type cap; + struct property *dt_dmach_prop; + struct s3c2410_dma_client *client; +}; + +struct samsung_dma_prep { enum dma_transaction_type cap; enum dma_transfer_direction direction; dma_addr_t buf; @@ -26,19 +32,17 @@ struct samsung_dma_prep_info { void *fp_param; }; -struct samsung_dma_info { - enum dma_transaction_type cap; +struct samsung_dma_config { enum dma_transfer_direction direction; enum dma_slave_buswidth width; dma_addr_t fifo; - struct s3c2410_dma_client *client; - struct property *dt_dmach_prop; }; struct samsung_dma_ops { - unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info); - int (*release)(unsigned ch, struct s3c2410_dma_client *client); - int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info); + unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param); + int (*release)(unsigned ch, void *param); + int (*config)(unsigned ch, struct samsung_dma_config *param); + int (*prepare)(unsigned ch, struct samsung_dma_prep *param); int (*trigger)(unsigned ch); int (*started)(unsigned ch); int (*flush)(unsigned ch); diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index 536002ff2ab..b885322717a 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -43,7 +43,6 @@ struct s3c_fb_pd_win { * @setup_gpio: Setup the external GPIO pins to the right state to transfer * the data from the display system to the connected display * device. - * @default_win: default window layer number to be used for UI layer. * @vidcon0: The base vidcon0 values to control the panel data format. * @vidcon1: The base vidcon1 values to control the panel data output. * @vtiming: Video timing when connected to a RGB type panel. diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index df8155b9d4d..08740eed050 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,7 +24,7 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ -#include<linux/types.h> +#include <linux/types.h> typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; diff --git a/arch/arm/plat-samsung/include/plat/pd.h b/arch/arm/plat-samsung/include/plat/pd.h deleted file mode 100644 index abb4bc32716..00000000000 --- a/arch/arm/plat-samsung/include/plat/pd.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/pd.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_SAMSUNG_PD_H -#define __ASM_PLAT_SAMSUNG_PD_H __FILE__ - -struct samsung_pd_info { - int (*enable)(struct device *dev); - int (*disable)(struct device *dev); - void __iomem *base; -}; - -enum exynos4_pd_block { - PD_MFC, - PD_G3D, - PD_LCD0, - PD_LCD1, - PD_TV, - PD_CAM, - PD_GPS -}; - -#endif /* __ASM_PLAT_SAMSUNG_PD_H */ diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index fa95e9a0097..ceba18d23a5 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -18,7 +18,6 @@ struct platform_device; * @fb_delay: Slave specific feedback delay. * Refer to FB_CLK_SEL register definition in SPI chapter. * @line: Custom 'identity' of the CS line. - * @set_level: CS line control. * * This is per SPI-Slave Chipselect information. * Allocate and initialize one in machine init code and make the @@ -27,57 +26,41 @@ struct platform_device; struct s3c64xx_spi_csinfo { u8 fb_delay; unsigned line; - void (*set_level)(unsigned line_id, int lvl); }; /** * struct s3c64xx_spi_info - SPI Controller defining structure * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. - * @clk_from_cmu: If the SPI clock/prescalar control block is present - * by the platform's clock-management-unit and not in SPI controller. * @num_cs: Number of CS this controller emulates. * @cfg_gpio: Configure pins for this SPI controller. - * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 - * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number - * @high_speed: If the controller supports HIGH_SPEED_EN bit - * @tx_st_done: Depends on tx fifo_lvl field */ struct s3c64xx_spi_info { int src_clk_nr; - bool clk_from_cmu; - int num_cs; - - int (*cfg_gpio)(struct platform_device *pdev); - - /* Following two fields are for future compatibility */ - int fifo_lvl_mask; - int rx_lvl_offset; - int high_speed; - int tx_st_done; + int (*cfg_gpio)(void); }; /** * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board * initialization code. - * @pd: SPI platform data to set. + * @cfg_gpio: Pointer to gpio setup function. * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. * @num_cs: Number of elements in the 'cs' array. * * Call this from machine init code for each SPI Controller that * has some chips attached to it. */ -extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs); -extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs); -extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, - int src_clk_nr, int num_cs); +extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); /* defined by architecture to configure gpio */ -extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev); -extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev); -extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev); +extern int s3c64xx_spi0_cfg_gpio(void); +extern int s3c64xx_spi1_cfg_gpio(void); +extern int s3c64xx_spi2_cfg_gpio(void); extern struct s3c64xx_spi_info s3c64xx_spi0_pdata; extern struct s3c64xx_spi_info s3c64xx_spi1_pdata; diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c deleted file mode 100644 index 312b510d86b..00000000000 --- a/arch/arm/plat-samsung/pd.c +++ /dev/null @@ -1,95 +0,0 @@ -/* linux/arch/arm/plat-samsung/pd.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung Power domain support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/export.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <linux/pm_runtime.h> - -#include <plat/pd.h> - -static int samsung_pd_probe(struct platform_device *pdev) -{ - struct samsung_pd_info *pdata = pdev->dev.platform_data; - struct device *dev = &pdev->dev; - - if (!pdata) { - dev_err(dev, "no device data specified\n"); - return -ENOENT; - } - - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - - dev_info(dev, "power domain registered\n"); - return 0; -} - -static int __devexit samsung_pd_remove(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - - pm_runtime_disable(dev); - return 0; -} - -static int samsung_pd_runtime_suspend(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - int ret = 0; - - if (pdata->disable) - ret = pdata->disable(dev); - - dev_dbg(dev, "suspended\n"); - return ret; -} - -static int samsung_pd_runtime_resume(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - int ret = 0; - - if (pdata->enable) - ret = pdata->enable(dev); - - dev_dbg(dev, "resumed\n"); - return ret; -} - -static const struct dev_pm_ops samsung_pd_pm_ops = { - .runtime_suspend = samsung_pd_runtime_suspend, - .runtime_resume = samsung_pd_runtime_resume, -}; - -static struct platform_driver samsung_pd_driver = { - .driver = { - .name = "samsung-pd", - .owner = THIS_MODULE, - .pm = &samsung_pd_pm_ops, - }, - .probe = samsung_pd_probe, - .remove = __devexit_p(samsung_pd_remove), -}; - -static int __init samsung_pd_init(void) -{ - int ret; - - ret = platform_driver_register(&samsung_pd_driver); - if (ret) - printk(KERN_ERR "%s: failed to add PD driver\n", __func__); - - return ret; -} -arch_initcall(samsung_pd_init); diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index c559d8438c7..d3583050fb0 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -36,7 +36,6 @@ struct pwm_device { unsigned int duty_ns; unsigned char tcon_base; - unsigned char running; unsigned char use_count; unsigned char pwm_id; }; @@ -116,7 +115,6 @@ int pwm_enable(struct pwm_device *pwm) local_irq_restore(flags); - pwm->running = 1; return 0; } @@ -134,8 +132,6 @@ void pwm_disable(struct pwm_device *pwm) __raw_writel(tcon, S3C2410_TCON); local_irq_restore(flags); - - pwm->running = 0; } EXPORT_SYMBOL(pwm_disable); diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c index 78149491282..f99448c48d3 100644 --- a/arch/arm/plat-samsung/s3c-dma-ops.c +++ b/arch/arm/plat-samsung/s3c-dma-ops.c @@ -36,30 +36,26 @@ static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param, } static unsigned s3c_dma_request(enum dma_ch dma_ch, - struct samsung_dma_info *info) + struct samsung_dma_req *param) { struct cb_data *data; - if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) { - s3c2410_dma_free(dma_ch, info->client); + if (s3c2410_dma_request(dma_ch, param->client, NULL) < 0) { + s3c2410_dma_free(dma_ch, param->client); return 0; } + if (param->cap == DMA_CYCLIC) + s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR); + data = kzalloc(sizeof(struct cb_data), GFP_KERNEL); data->ch = dma_ch; list_add_tail(&data->node, &dma_list); - s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo); - - if (info->cap == DMA_CYCLIC) - s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR); - - s3c2410_dma_config(dma_ch, info->width); - return (unsigned)dma_ch; } -static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client) +static int s3c_dma_release(unsigned ch, void *param) { struct cb_data *data; @@ -68,16 +64,24 @@ static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client) break; list_del(&data->node); - s3c2410_dma_free(ch, client); + s3c2410_dma_free(ch, param); kfree(data); return 0; } -static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info) +static int s3c_dma_config(unsigned ch, struct samsung_dma_config *param) +{ + s3c2410_dma_devconfig(ch, param->direction, param->fifo); + s3c2410_dma_config(ch, param->width); + + return 0; +} + +static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param) { struct cb_data *data; - int len = (info->cap == DMA_CYCLIC) ? info->period : info->len; + int len = (param->cap == DMA_CYCLIC) ? param->period : param->len; list_for_each_entry(data, &dma_list, node) if (data->ch == ch) @@ -85,11 +89,11 @@ static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info) if (!data->fp) { s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb); - data->fp = info->fp; - data->fp_param = info->fp_param; + data->fp = param->fp; + data->fp_param = param->fp_param; } - s3c2410_dma_enqueue(ch, (void *)data, info->buf, len); + s3c2410_dma_enqueue(ch, (void *)data, param->buf, len); return 0; } @@ -117,6 +121,7 @@ static inline int s3c_dma_stop(unsigned ch) static struct samsung_dma_ops s3c_dma_ops = { .request = s3c_dma_request, .release = s3c_dma_release, + .config = s3c_dma_config, .prepare = s3c_dma_prepare, .trigger = s3c_dma_trigger, .started = s3c_dma_started, |