13 files changed, 0 insertions, 620 deletions

diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h
deleted file mode 100644
index 2a3855a8372..00000000000
--- a/arch/arm/plat-samsung/include/plat/ata.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/ata.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ATA_H
-#define __ASM_PLAT_ATA_H __FILE__
-
-/**
- * struct s3c_ide_platdata - S3C IDE driver platform data.
- * @setup_gpio: Setup the external GPIO pins to the right state for data
- * transfer in true-ide mode.
- */
-struct s3c_ide_platdata {
-	void (*setup_gpio)(void);
-};
-
-/*
- * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
- * @pdata: Platform data for IDE driver.
- */
-extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
-
-/* architecture-specific IDE configuration */
-extern void s3c64xx_ide_setup_gpio(void);
-extern void s5pc100_ide_setup_gpio(void);
-extern void s5pv210_ide_setup_gpio(void);
-
-#endif /*__ASM_PLAT_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h
deleted file mode 100644
index 376af5286a3..00000000000
--- a/arch/arm/plat-samsung/include/plat/audio-simtec.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
-	unsigned int	use_mpllin:1;
-	unsigned int	output_cdclk:1;
-
-	unsigned int	have_mic:1;
-	unsigned int	have_lout:1;
-
-	int		amp_gpio;
-	int		amp_gain[2];
-
-	void	(*startup)(void);
-};
diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
deleted file mode 100644
index aa9875f77c4..00000000000
--- a/arch/arm/plat-samsung/include/plat/audio.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* The machine init code calls s3c*_ac97_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for AC97 pins
- */
-#define S3C64XX_AC97_GPD  0
-#define S3C64XX_AC97_GPE  1
-extern void s3c64xx_ac97_setup_gpio(int);
-
-/*
- * The machine init code calls s5p*_spdif_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for S/PDIF pins
- */
-#define S5PC100_SPDIF_GPD  0
-#define S5PC100_SPDIF_GPG3 1
-extern void s5pc100_spdif_setup_gpio(int);
-
-struct samsung_i2s {
-/* If the Primary DAI has 5.1 Channels */
-#define QUIRK_PRI_6CHAN		(1 << 0)
-/* If the I2S block has a Stereo Overlay Channel */
-#define QUIRK_SEC_DAI		(1 << 1)
-/*
- * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
- * The Machine driver must provide suitably set clock to the I2S block.
- */
-#define QUIRK_NO_MUXPSR		(1 << 2)
-#define QUIRK_NEED_RSTCLR	(1 << 3)
-	/* Quirks of the I2S controller */
-	u32 quirks;
-
-	/*
-	 * Array of clock names that can be used to generate I2S signals.
-	 * Also corresponds to clocks of I2SMOD[10]
-	 */
-	const char **src_clk;
-	dma_addr_t idma_addr;
-};
-
-/**
- * struct s3c_audio_pdata - common platform data for audio device drivers
- * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
- */
-struct s3c_audio_pdata {
-	int (*cfg_gpio)(struct platform_device *);
-	union {
-		struct samsung_i2s i2s;
-	} type;
-};
diff --git a/arch/arm/plat-samsung/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h
deleted file mode 100644
index 5f28cae1858..00000000000
--- a/arch/arm/plat-samsung/include/plat/ehci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_EHCI_H
-#define __PLAT_SAMSUNG_EHCI_H __FILE__
-
-struct s5p_ehci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h
deleted file mode 100644
index c167e4429bc..00000000000
--- a/arch/arm/plat-samsung/include/plat/hwmon.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
- * Copyright 2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C - HWMon interface for ADC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
-
-/**
- * s3c_hwmon_chcfg - channel configuration
- * @name: The name to give this channel.
- * @mult: Multiply the ADC value read by this.
- * @div: Divide the value from the ADC by this.
- *
- * The value read from the ADC is converted to a value that
- * hwmon expects (mV) by result = (value_read * @mult) / @div.
- */
-struct s3c_hwmon_chcfg {
-	const char	*name;
-	unsigned int	mult;
-	unsigned int	div;
-};
-
-/**
- * s3c_hwmon_pdata - HWMON platform data
- * @in: One configuration for each possible channel used.
- */
-struct s3c_hwmon_pdata {
-	struct s3c_hwmon_chcfg	*in[8];
-};
-
-/**
- * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with the S3C HWMON device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
-
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
deleted file mode 100644
index 51d52e767a1..00000000000
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
- * Copyright 2004-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
-
-/**
- *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
- *	@bus_num: The bus number to use (if possible).
- *	@flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
- *	@slave_addr: The I2C address for the slave device (if enabled).
- *	@frequency: The desired frequency in Hz of the bus.  This is
- *                  guaranteed to not be exceeded.  If the caller does
- *                  not care, use zero and the driver will select a
- *                  useful default.
- *	@sda_delay: The delay (in ns) applied to SDA edges.
- *	@cfg_gpio: A callback to configure the pins for I2C operation.
- */
-struct s3c2410_platform_i2c {
-	int		bus_num;
-	unsigned int	flags;
-	unsigned int	slave_addr;
-	unsigned long	frequency;
-	unsigned int	sda_delay;
-
-	void	(*cfg_gpio)(struct platform_device *dev);
-};
-
-/**
- * s3c_i2c0_set_platdata - set platform data for i2c0 device
- * @i2c: The platform data to set, or NULL for default data.
- *
- * Register the given platform data for use with the i2c0 device. This
- * call copies the platform data, so the caller can use __initdata for
- * their copy.
- *
- * This call will set cfg_gpio if is null to the default platform
- * implementation.
- *
- * Any user of s3c_device_i2c0 should call this, even if it is with
- * NULL to ensure that the device is given the default platform data
- * as the driver will no longer carry defaults.
- */
-extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
-
-/* defined by architecture to configure gpio */
-extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
-
-extern struct s3c2410_platform_i2c default_i2c_data;
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h
deleted file mode 100644
index c42d3171194..00000000000
--- a/arch/arm/plat-samsung/include/plat/mci.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-/**
- * struct s3c24xx_mci_pdata - sd/mmc controller platform data
- * @no_wprotect: Set this to indicate there is no write-protect switch.
- * @no_detect: Set this if there is no detect switch.
- * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
- * @use_dma: Set to allow the use of DMA.
- * @gpio_detect: GPIO number for the card detect line.
- * @gpio_wprotect: GPIO number for the write protect line.
- * @ocr_avail: The mask of the available power states, non-zero to use.
- * @set_power: Callback to control the power mode.
- *
- * The @gpio_detect is used for card detection when @no_wprotect is unset,
- * and the default sense is that 0 returned from gpio_get_value() means
- * that a card is inserted. If @detect_invert is set, then the value from
- * gpio_get_value() is inverted, which makes 1 mean card inserted.
- *
- * The driver will use @gpio_wprotect to signal whether the card is write
- * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
- * means the card is read/write, and 1 means read-only. The @wprotect_invert
- * will invert the value returned from gpio_get_value().
- *
- * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
- * to a non-zero value, otherwise the default of 3.2-3.4V is used.
- */
-struct s3c24xx_mci_pdata {
-	unsigned int	no_wprotect:1;
-	unsigned int	no_detect:1;
-	unsigned int	wprotect_invert:1;
-	unsigned int	detect_invert:1;	/* set => detect active high */
-	unsigned int	use_dma:1;
-
-	unsigned int	gpio_detect;
-	unsigned int	gpio_wprotect;
-	unsigned long	ocr_avail;
-	void		(*set_power)(unsigned char power_mode,
-				     unsigned short vdd);
-};
-
-/**
- * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
- * @pdata: The platform data
- *
- * Copy the platform data supplied by @pdata so that this can be marked
- * __initdata.
- */
-extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
-
-#endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h
deleted file mode 100644
index c45b1e8d4c2..00000000000
--- a/arch/arm/plat-samsung/include/plat/mipi_csis.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
-#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- *		   driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
-	unsigned long clk_rate;
-	u8 lanes;
-	u8 alignment;
-	u8 hs_settle;
-	bool fixed_phy_vdd;
-	int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- *	false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
deleted file mode 100644
index b64115fa93a..00000000000
--- a/arch/arm/plat-samsung/include/plat/nand.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc:	Entirely disable ECC - Dangerous
- * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
- *			Setting this flag will allow the kernel to
- *			look for it at boot time and also skip the NAND
- *			scan.
- * @options:		Default value to set into 'struct nand_chip' options.
- * @nr_chips:		Number of chips in this set
- * @nr_partitions:	Number of partitions pointed to by @partitions
- * @name:		Name of set (optional)
- * @nr_map:		Map for low-layer logical to physical chip numbers (option)
- * @partitions:		The mtd partition list
- *
- * define a set of one or more nand chips registered with an unique mtd. Also
- * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
- * a warning at boot time.
- */
-struct s3c2410_nand_set {
-	unsigned int		disable_ecc:1;
-	unsigned int		flash_bbt:1;
-
-	unsigned int		options;
-	int			nr_chips;
-	int			nr_partitions;
-	char			*name;
-	int			*nr_map;
-	struct mtd_partition	*partitions;
-	struct nand_ecclayout	*ecc_layout;
-};
-
-struct s3c2410_platform_nand {
-	/* timing information for controller, all times in nanoseconds */
-
-	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
-	int	twrph0;	/* active time for nWE/nOE */
-	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
-
-	unsigned int	ignore_unset_ecc:1;
-
-	int			nr_sets;
-	struct s3c2410_nand_set *sets;
-
-	void			(*select_chip)(struct s3c2410_nand_set *,
-					       int chip);
-};
-
-/**
- * s3c_nand_set_platdata() - register NAND platform data.
- * @nand: The NAND platform data to register with s3c_device_nand.
- *
- * This function copies the given NAND platform data, @nand and registers
- * it with the s3c_device_nand. This allows @nand to be __initdata.
-*/
-extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
deleted file mode 100644
index ceba18d23a5..00000000000
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C64XX_PLAT_SPI_H
-#define __S3C64XX_PLAT_SPI_H
-
-struct platform_device;
-
-/**
- * struct s3c64xx_spi_csinfo - ChipSelect description
- * @fb_delay: Slave specific feedback delay.
- *            Refer to FB_CLK_SEL register definition in SPI chapter.
- * @line: Custom 'identity' of the CS line.
- *
- * This is per SPI-Slave Chipselect information.
- * Allocate and initialize one in machine init code and make the
- * spi_board_info.controller_data point to it.
- */
-struct s3c64xx_spi_csinfo {
-	u8 fb_delay;
-	unsigned line;
-};
-
-/**
- * struct s3c64xx_spi_info - SPI Controller defining structure
- * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @num_cs: Number of CS this controller emulates.
- * @cfg_gpio: Configure pins for this SPI controller.
- */
-struct s3c64xx_spi_info {
-	int src_clk_nr;
-	int num_cs;
-	int (*cfg_gpio)(void);
-};
-
-/**
- * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
- *				initialization code.
- * @cfg_gpio: Pointer to gpio setup function.
- * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
- * @num_cs: Number of elements in the 'cs' array.
- *
- * Call this from machine init code for each SPI Controller that
- * has some chips attached to it.
- */
-extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-
-/* defined by architecture to configure gpio */
-extern int s3c64xx_spi0_cfg_gpio(void);
-extern int s3c64xx_spi1_cfg_gpio(void);
-extern int s3c64xx_spi2_cfg_gpio(void);
-
-extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
-#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h
deleted file mode 100644
index 26fdb22e0fc..00000000000
--- a/arch/arm/plat-samsung/include/plat/ts.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/ts.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_TS_H
-#define __ASM_ARM_TS_H
-
-struct s3c2410_ts_mach_info {
-       int             delay;
-       int             presc;
-       int             oversampling_shift;
-	void    (*cfg_gpio)(struct platform_device *dev);
-};
-
-extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
-
-/* defined by architecture to configure gpio */
-extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
-
-#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/plat-samsung/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h
deleted file mode 100644
index de8e2288a50..00000000000
--- a/arch/arm/plat-samsung/include/plat/udc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- *  Changelog:
- *	14-Mar-2005	RTP	Created file
- *	02-Aug-2005	RTP	File rename
- *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
- *	18-Jan-2007	HMW	Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
-	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
-	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
-	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
-	void	(*udc_command)(enum s3c2410_udc_cmd_e);
-	void	(*vbus_draw)(unsigned int ma);
-
-	unsigned int pullup_pin;
-	unsigned int pullup_pin_inverted;
-
-	unsigned int vbus_pin;
-	unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-struct s3c24xx_hsudc_platdata;
-
-extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/arch/arm/plat-samsung/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h
deleted file mode 100644
index 7fa1fbefc3f..00000000000
--- a/arch/arm/plat-samsung/include/plat/usb-control.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB host port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H
-
-#define S3C_HCDFLG_USED	(1)
-
-struct s3c2410_hcd_port {
-	unsigned char	flags;
-	unsigned char	power;
-	unsigned char	oc_status;
-	unsigned char	oc_changed;
-};
-
-struct s3c2410_hcd_info {
-	struct usb_hcd		*hcd;
-	struct s3c2410_hcd_port	port[2];
-
-	void		(*power_control)(int port, int to);
-	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
-	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
-	if (info->report_oc != NULL) {
-		(info->report_oc)(info, ports);
-	}
-}
-
-extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
-
-#endif /*__ASM_ARCH_USBCONTROL_H */