9 files changed, 3 insertions, 802 deletions

diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index c7ccdf22eef..c7bd2bbda23 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -16,9 +16,10 @@ config PLAT_S5PC1XX
 	select SAMSUNG_IRQ_VIC_TIMER
 	select S3C_GPIO_TRACK
 	select S3C_GPIO_PULL_UPDOWN
+	select S5P_GPIO_DRVSTR
 	select S3C_GPIO_CFG_S3C24XX
 	select S3C_GPIO_CFG_S3C64XX
-	select S5P_GPIO_CFG_S5PC1XX
+	select SAMSUNG_GPIOLIB_4BIT
 	help
 	  Base platform code for any Samsung S5PC1XX device
 
@@ -38,25 +39,6 @@ config CPU_S5PC100_CLOCK
 
 # platform specific device setup
 
-config S5PC1XX_SETUP_FB_24BPP
-	bool
-	help
-          Common setup code for S5PC1XX with an 24bpp RGB display helper.
-
-config S5PC1XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S5PC1XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
 config S5PC1XX_SETUP_SDHCI_GPIO
 	bool
 	help
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index 278f2680608..9ce6409a9e0 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -13,9 +13,8 @@ obj-				:=
 
 obj-y				+= dev-uart.o
 obj-y				+= cpu.o
-obj-y				+= irq.o irq-gpio.o irq-eint.o
+obj-y				+= irq.o
 obj-y				+= clock.o
-obj-y				+= gpiolib.o
 
 # CPU support
 
@@ -24,8 +23,4 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
 
 # Device setup
 
-obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
-obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
deleted file mode 100644
index a4f67e80a15..00000000000
--- a/arch/arm/plat-s5pc1xx/gpio-config.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * S5PC1XX GPIO Configuration.
- *
- * Based on plat-s3c64xx/gpio-config.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	void __iomem *reg;
-	int shift = off * 2;
-	u32 drvstr;
-
-	if (!chip)
-		return -EINVAL;
-
-	reg = chip->base + 0x0C;
-
-	drvstr = __raw_readl(reg);
-	drvstr = 0xffff & (0x3 << shift);
-	drvstr = drvstr >> shift;
-
-	return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
-			s5p_gpio_drvstr_t drvstr)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	void __iomem *reg;
-	int shift = off * 2;
-	u32 tmp;
-
-	if (!chip)
-		return -EINVAL;
-
-	reg = chip->base + 0x0C;
-
-	tmp = __raw_readl(reg);
-	tmp |= drvstr << shift;
-
-	__raw_writel(tmp, reg);
-
-	return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
deleted file mode 100644
index 1ffc57ac293..00000000000
--- a/arch/arm/plat-s5pc1xx/gpiolib.c
+++ /dev/null
@@ -1,503 +0,0 @@
-/*
- * arch/arm/plat-s5pc1xx/gpiolib.c
- *
- *  Copyright 2009 Samsung Electronics Co
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S5PC1XX - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/regs-gpio.h>
-
-/* S5PC100 GPIO bank summary:
- *
- * Bank	GPIOs	Style	INT Type
- * A0	8	4Bit	GPIO_INT0
- * A1	5	4Bit	GPIO_INT1
- * B	8	4Bit	GPIO_INT2
- * C	5	4Bit	GPIO_INT3
- * D	7	4Bit	GPIO_INT4
- * E0	8	4Bit	GPIO_INT5
- * E1	6	4Bit	GPIO_INT6
- * F0	8	4Bit	GPIO_INT7
- * F1	8	4Bit	GPIO_INT8
- * F2	8	4Bit	GPIO_INT9
- * F3	4	4Bit	GPIO_INT10
- * G0	8	4Bit	GPIO_INT11
- * G1	3	4Bit	GPIO_INT12
- * G2	7	4Bit	GPIO_INT13
- * G3	7	4Bit	GPIO_INT14
- * H0	8	4Bit	WKUP_INT
- * H1	8	4Bit	WKUP_INT
- * H2	8	4Bit	WKUP_INT
- * H3	8	4Bit	WKUP_INT
- * I	8	4Bit	GPIO_INT15
- * J0	8	4Bit	GPIO_INT16
- * J1	5	4Bit	GPIO_INT17
- * J2	8	4Bit	GPIO_INT18
- * J3	8	4Bit	GPIO_INT19
- * J4	4	4Bit	GPIO_INT20
- * K0	8	4Bit	None
- * K1	6	4Bit	None
- * K2	8	4Bit	None
- * K3	8	4Bit	None
- * L0	8	4Bit	None
- * L1	8	4Bit	None
- * L2	8	4Bit	None
- * L3	8	4Bit	None
- */
-
-#define OFF_GPCON	(0x00)
-#define OFF_GPDAT	(0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-#if 1
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The s5pc1xx_gpiolib routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
- */
-
-static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + OFF_GPCON);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, base + OFF_GPCON);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	return S3C_IRQ_GPIO(chip->base + offset);
-}
-
-static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
-{
-	int base;
-
-	base = chip->base - S5PC100_GPH0(0);
-	if (base == 0)
-		return IRQ_EINT(offset);
-	base = chip->base - S5PC100_GPH1(0);
-	if (base == 0)
-		return IRQ_EINT(8 + offset);
-	base = chip->base - S5PC100_GPH2(0);
-	if (base == 0)
-		return IRQ_EINT(16 + offset);
-	base = chip->base - S5PC100_GPH3(0);
-	if (base == 0)
-		return IRQ_EINT(24 + offset);
-	return -EINVAL;
-}
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_eint = {
-	.cfg_eint	= 0xf,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
-	{
-		.base	= S5PC100_GPA0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPA0(0),
-			.ngpio	= S5PC100_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.base	= S5PC100_GPA1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPA1(0),
-			.ngpio	= S5PC100_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.base	= S5PC100_GPB_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPB(0),
-			.ngpio	= S5PC100_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S5PC100_GPC_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPC(0),
-			.ngpio	= S5PC100_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5PC100_GPD_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPD(0),
-			.ngpio	= S5PC100_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S5PC100_GPE0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPE0(0),
-			.ngpio	= S5PC100_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.base	= S5PC100_GPE1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPE1(0),
-			.ngpio	= S5PC100_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.base	= S5PC100_GPF0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF0(0),
-			.ngpio	= S5PC100_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.base	= S5PC100_GPF1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF1(0),
-			.ngpio	= S5PC100_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.base	= S5PC100_GPF2_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF2(0),
-			.ngpio	= S5PC100_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.base	= S5PC100_GPF3_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF3(0),
-			.ngpio	= S5PC100_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.base	= S5PC100_GPG0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG0(0),
-			.ngpio	= S5PC100_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.base	= S5PC100_GPG1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG1(0),
-			.ngpio	= S5PC100_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.base	= S5PC100_GPG2_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG2(0),
-			.ngpio	= S5PC100_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.base	= S5PC100_GPG3_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG3(0),
-			.ngpio	= S5PC100_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.base	= S5PC100_GPH0_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH0(0),
-			.ngpio	= S5PC100_GPIO_H0_NR,
-			.label	= "GPH0",
-		},
-	}, {
-		.base	= S5PC100_GPH1_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH1(0),
-			.ngpio	= S5PC100_GPIO_H1_NR,
-			.label	= "GPH1",
-		},
-	}, {
-		.base	= S5PC100_GPH2_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH2(0),
-			.ngpio	= S5PC100_GPIO_H2_NR,
-			.label	= "GPH2",
-		},
-	}, {
-		.base	= S5PC100_GPH3_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH3(0),
-			.ngpio	= S5PC100_GPIO_H3_NR,
-			.label	= "GPH3",
-		},
-	}, {
-		.base	= S5PC100_GPI_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPI(0),
-			.ngpio	= S5PC100_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5PC100_GPJ0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ0(0),
-			.ngpio	= S5PC100_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.base	= S5PC100_GPJ1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ1(0),
-			.ngpio	= S5PC100_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.base	= S5PC100_GPJ2_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ2(0),
-			.ngpio	= S5PC100_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.base	= S5PC100_GPJ3_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ3(0),
-			.ngpio	= S5PC100_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.base	= S5PC100_GPJ4_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ4(0),
-			.ngpio	= S5PC100_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.base	= S5PC100_GPK0_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK0(0),
-			.ngpio	= S5PC100_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.base	= S5PC100_GPK1_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK1(0),
-			.ngpio	= S5PC100_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.base	= S5PC100_GPK2_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK2(0),
-			.ngpio	= S5PC100_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.base	= S5PC100_GPK3_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK3(0),
-			.ngpio	= S5PC100_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.base	= S5PC100_GPL0_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL0(0),
-			.ngpio	= S5PC100_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.base	= S5PC100_GPL1_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL1(0),
-			.ngpio	= S5PC100_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.base	= S5PC100_GPL2_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL2(0),
-			.ngpio	= S5PC100_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.base	= S5PC100_GPL3_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL3(0),
-			.ngpio	= S5PC100_GPIO_L3_NR,
-			.label	= "GPL3",
-		},
-	}, {
-		.base	= S5PC100_GPL4_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL4(0),
-			.ngpio	= S5PC100_GPIO_L4_NR,
-			.label	= "GPL4",
-		},
-	},
-};
-
-/* FIXME move from irq-gpio.c */
-extern struct irq_chip s5pc1xx_gpioint;
-extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
-
-static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s5pc1xx_gpiolib_input;
-	chip->chip.direction_output = s5pc1xx_gpiolib_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-
-	/* Interrupt */
-	if (chip->config == &gpio_cfg) {
-		int i, irq;
-
-		chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
-
-		for (i = 0;  i < chip->chip.ngpio; i++) {
-			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
-			set_irq_chip(irq, &s5pc1xx_gpioint);
-			set_irq_data(irq, &chip->chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-	} else if (chip->config == &gpio_cfg_eint)
-		chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
-}
-
-static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s5pc1xx_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chips;
-	int nr_chips;
-
-		chips = s5pc100_gpio_chips;
-		nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-
-	s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
-	/* Interrupt */
-	set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
-
-	return 0;
-}
-core_initcall(s5pc1xx_gpiolib_init);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
deleted file mode 100644
index 72ad59f61ef..00000000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
- *
- * Copyright 2009 Samsung Electronic
- *
- * S5PC1XX Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-#ifndef __GPIO_CFG_S5PC1XX_H
-#define __GPIO_CFG_S5PC1XX_H __FILE__
-
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
-
-#define S5P_GPIO_DRVSTR_LV1	0x00
-#define S5P_GPIO_DRVSTR_LV2	0x01
-#define S5P_GPIO_DRVSTR_LV3	0x10
-#define S5P_GPIO_DRVSTR_LV4	0x11
-
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
-
-extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
-			s5p_gpio_drvstr_t drvstr);
-
-#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
deleted file mode 100644
index 43c7bc8bf78..00000000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - GPIO register definitions
- */
-
-#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H
-#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-/* S5PC100 */
-#define S5PC100_GPIO_BASE	S5PC1XX_VA_GPIO
-#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
-#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
-#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
-#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
-#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
-#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
-#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
-#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
-#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
-#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
-#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
-#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
-#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
-#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
-#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
-#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
-#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
-#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
-#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
-#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
-#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
-#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
-#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
-#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
-#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
-#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
-#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
-#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
-#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
-#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
-#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
-#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
-#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
-#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
-#define S5PC100_EINT_BASE	(S5PC100_GPIO_BASE + 0x0E00)
-
-#define S5PC100_UHOST		(S5PC100_GPIO_BASE + 0x0B68)
-#define S5PC100_PDNEN		(S5PC100_GPIO_BASE + 0x0F80)
-
-/* PDNEN */
-#define S5PC100_PDNEN_CFG_PDNEN	(1 << 1)
-#define S5PC100_PDNEN_CFG_AUTO	(0 << 1)
-#define S5PC100_PDNEN_POWERDOWN	(1 << 0)
-#define S5PC100_PDNEN_NORMAL	(0 << 0)
-
-/* Common part */
-/* External interrupt base is same at both s5pc100 and s5pc110 */
-#define S5PC1XX_EINT_BASE	(S5PC100_EINT_BASE)
-
-#define S5PC100_GPx_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S5PC100_GPx_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-#define S5PC100_GPx_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-
-#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */
-
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
deleted file mode 100644
index 1a63768a9a2..00000000000
--- a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * Base S5PC1XX setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-#define DISR_OFFSET	0x7008
-
-void s5pc100_fb_gpio_setup_24bpp(void)
-{
-	unsigned int gpio = 0;
-
-	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
deleted file mode 100644
index 5e4a7c3a231..00000000000
--- a/arch/arm/plat-s5pc1xx/setup-i2c0.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC1XX I2C bus 0 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
deleted file mode 100644
index a0a8b4ae6ad..00000000000
--- a/arch/arm/plat-s5pc1xx/setup-i2c1.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC1XX I2C bus 1 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c1.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
-}