diff options
Diffstat (limited to 'arch/arm/plat-s3c24xx')
| -rw-r--r-- | arch/arm/plat-s3c24xx/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/adc.c | 11 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/common-smdk.c | 25 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/devs.c | 30 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/dma.c | 153 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/gpio.c | 34 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/gpiolib.c | 50 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/include/plat/dma-plat.h (renamed from arch/arm/plat-s3c24xx/include/plat/dma.h) | 12 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/include/plat/map.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/include/plat/pm-core.h | 5 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/include/plat/regs-dma.h | 145 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/pm.c | 222 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/setup-i2c.c | 5 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c | 20 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c | 20 |
15 files changed, 306 insertions, 428 deletions
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 2c8a2f5d75f..5b0bc914f58 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -71,6 +71,7 @@ config PM_SIMTEC config S3C2410_DMA bool "S3C2410 DMA support" depends on ARCH_S3C2410 + select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which use the S3C2410's DMA system to move data to and from the diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 91adfa71c17..ee1baf11ad9 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -45,7 +45,8 @@ struct s3c_adc_client { unsigned char channel; void (*select_cb)(unsigned selected); - void (*convert_cb)(unsigned val1, unsigned val2); + void (*convert_cb)(unsigned val1, unsigned val2, + unsigned *samples_left); }; struct adc_device { @@ -158,7 +159,8 @@ static void s3c_adc_default_select(unsigned select) struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev, void (*select)(unsigned int selected), - void (*conv)(unsigned d0, unsigned d1), + void (*conv)(unsigned d0, unsigned d1, + unsigned *samples_left), unsigned int is_ts) { struct s3c_adc_client *client; @@ -227,9 +229,10 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) data1 = readl(adc->regs + S3C2410_ADCDAT1); adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1); - (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff); + client->nr_samples--; + (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples); - if (--client->nr_samples > 0) { + if (client->nr_samples > 0) { /* fire another conversion for this */ client->select_cb(1); diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 1a8347cec20..aa119863c5c 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -18,6 +18,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/sysdev.h> #include <linux/platform_device.h> @@ -47,27 +48,27 @@ /* LED devices */ static struct s3c24xx_led_platdata smdk_pdata_led4 = { - .gpio = S3C2410_GPF4, + .gpio = S3C2410_GPF(4), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led4", .def_trigger = "timer", }; static struct s3c24xx_led_platdata smdk_pdata_led5 = { - .gpio = S3C2410_GPF5, + .gpio = S3C2410_GPF(5), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led5", .def_trigger = "nand-disk", }; static struct s3c24xx_led_platdata smdk_pdata_led6 = { - .gpio = S3C2410_GPF6, + .gpio = S3C2410_GPF(6), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led6", }; static struct s3c24xx_led_platdata smdk_pdata_led7 = { - .gpio = S3C2410_GPF7, + .gpio = S3C2410_GPF(7), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led7", }; @@ -184,15 +185,15 @@ void __init smdk_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ - s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP); + s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPF4, 1); - s3c2410_gpio_setpin(S3C2410_GPF5, 1); - s3c2410_gpio_setpin(S3C2410_GPF6, 1); - s3c2410_gpio_setpin(S3C2410_GPF7, 1); + s3c2410_gpio_setpin(S3C2410_GPF(4), 1); + s3c2410_gpio_setpin(S3C2410_GPF(5), 1); + s3c2410_gpio_setpin(S3C2410_GPF(6), 1); + s3c2410_gpio_setpin(S3C2410_GPF(7), 1); if (machine_is_smdk2443()) smdk_nand_info.twrph0 = 50; diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 16ac01d9b8a..4eb378c89a3 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -136,36 +136,6 @@ struct platform_device *s3c24xx_uart_src[4] = { struct platform_device *s3c24xx_uart_devs[4] = { }; -/* USB Host Controller */ - -static struct resource s3c_usb_resource[] = { - [0] = { - .start = S3C24XX_PA_USBHOST, - .end = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBH, - .end = IRQ_USBH, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s3c_device_usb_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_usb = { - .name = "s3c2410-ohci", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_usb_resource), - .resource = s3c_usb_resource, - .dev = { - .dma_mask = &s3c_device_usb_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_usb); - /* LCD Controller */ static struct resource s3c_lcd_resource[] = { diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index aee2aeb46c6..196b1912365 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -31,10 +31,10 @@ #include <asm/irq.h> #include <mach/hardware.h> #include <mach/dma.h> - #include <mach/map.h> -#include <plat/dma.h> +#include <plat/dma-plat.h> +#include <plat/regs-dma.h> /* io map for dma */ static void __iomem *dma_base; @@ -44,8 +44,6 @@ static int dma_channels; static struct s3c24xx_dma_selection dma_sel; -/* dma channel state information */ -struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; /* debugging functions */ @@ -135,21 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) #define dbg_showchan(chan) do { } while(0) #endif /* CONFIG_S3C2410_DMA_DEBUG */ -static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; - -/* lookup_dma_channel - * - * change the dma channel number given into a real dma channel id -*/ - -static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) -{ - if (channel & DMACH_LOW_LEVEL) - return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; - else - return dma_chan_map[channel]; -} - /* s3c2410_dma_stats_timeout * * Update DMA stats from timeout info @@ -214,8 +197,6 @@ s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line) return 0; } - - /* s3c2410_dma_loadbuffer * * load a buffer, and update the channel state @@ -453,7 +434,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) int s3c2410_dma_enqueue(unsigned int channel, void *id, dma_addr_t data, int size) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); struct s3c2410_dma_buf *buf; unsigned long flags; @@ -804,7 +785,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; if (chan == NULL) @@ -836,7 +817,7 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) chan->irq_claimed = 0; if (!(channel & DMACH_LOW_LEVEL)) - dma_chan_map[channel] = NULL; + s3c_dma_chan_map[channel] = NULL; local_irq_restore(flags); @@ -995,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); if (chan == NULL) return -EINVAL; @@ -1038,14 +1019,13 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); /* s3c2410_dma_config * * xfersize: size of unit in bytes (1,2,4) - * dcon: base value of the DCONx register */ int s3c2410_dma_config(unsigned int channel, - int xferunit, - int dcon) + int xferunit) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + unsigned int dcon; pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", __func__, channel, xferunit, dcon); @@ -1055,10 +1035,33 @@ int s3c2410_dma_config(unsigned int channel, pr_debug("%s: Initial dcon is %08x\n", __func__, dcon); - dcon |= chan->dcon & dma_sel.dcon_mask; + dcon = chan->dcon & dma_sel.dcon_mask; pr_debug("%s: New dcon is %08x\n", __func__, dcon); + switch (chan->req_ch) { + case DMACH_I2S_IN: + case DMACH_I2S_OUT: + case DMACH_PCM_IN: + case DMACH_PCM_OUT: + case DMACH_MIC_IN: + default: + dcon |= S3C2410_DCON_HANDSHAKE; + dcon |= S3C2410_DCON_SYNC_PCLK; + break; + + case DMACH_SDI: + /* note, ensure if need HANDSHAKE or not */ + dcon |= S3C2410_DCON_SYNC_PCLK; + break; + + case DMACH_XD0: + case DMACH_XD1: + dcon |= S3C2410_DCON_HANDSHAKE; + dcon |= S3C2410_DCON_SYNC_HCLK; + break; + } + switch (xferunit) { case 1: dcon |= S3C2410_DCON_BYTE; @@ -1090,58 +1093,6 @@ int s3c2410_dma_config(unsigned int channel, EXPORT_SYMBOL(s3c2410_dma_config); -int s3c2410_dma_setflags(unsigned int channel, unsigned int flags) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags); - - chan->flags = flags; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_setflags); - - -/* do we need to protect the settings of the fields from - * irq? -*/ - -int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn); - - chan->op_fn = rtn; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_set_opfn); - -int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn); - - chan->callback_fn = rtn; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); /* s3c2410_dma_devconfig * @@ -1150,29 +1101,38 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); * source: S3C2410_DMASRC_HW: source is hardware * S3C2410_DMASRC_MEM: source is memory * - * hwcfg: the value for xxxSTCn register, - * bit 0: 0=increment pointer, 1=leave pointer - * bit 1: 0=source is AHB, 1=source is APB - * * devaddr: physical address of the source */ int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, - int hwcfg, unsigned long devaddr) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + unsigned int hwcfg; if (chan == NULL) return -EINVAL; - pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", - __func__, (int)source, hwcfg, devaddr); + pr_debug("%s: source=%d, devaddr=%08lx\n", + __func__, (int)source, devaddr); chan->source = source; chan->dev_addr = devaddr; - chan->hw_cfg = hwcfg; + + switch (chan->req_ch) { + case DMACH_XD0: + case DMACH_XD1: + hwcfg = 0; /* AHB */ + break; + + default: + hwcfg = S3C2410_DISRCC_APB; + } + + /* always assume our peripheral desintation is a fixed + * address in memory. */ + hwcfg |= S3C2410_DISRCC_INC; switch (source) { case S3C2410_DMASRC_HW: @@ -1219,7 +1179,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); if (chan == NULL) return -EINVAL; @@ -1235,7 +1195,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d EXPORT_SYMBOL(s3c2410_dma_getposition); -static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) +static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) { return container_of(dev, struct s3c2410_dma_chan, dev); } @@ -1278,8 +1238,8 @@ static int s3c2410_dma_resume(struct sys_device *dev) printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); - s3c2410_dma_config(no, cp->xfer_unit, cp->dcon); - s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr); + s3c2410_dma_config(no, cp->xfer_unit); + s3c2410_dma_devconfig(no, cp->source, cp->dev_addr); /* re-select the dma source for this channel */ @@ -1476,7 +1436,8 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) found: dmach = &s3c2410_chans[ch]; dmach->map = ch_map; - dma_chan_map[channel] = dmach; + dmach->req_ch = channel; + s3c_dma_chan_map[channel] = dmach; /* select the channel */ diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 4a899c279eb..95df059b5a1 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -183,35 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr); int s3c2410_gpio_getirq(unsigned int pin) { - if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15) - return -1; /* not valid interrupts */ + if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15)) + return -EINVAL; /* not valid interrupts */ - if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) - return -1; /* not valid pin */ + if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7)) + return -EINVAL; /* not valid pin */ - if (pin < S3C2410_GPF4) - return (pin - S3C2410_GPF0) + IRQ_EINT0; + if (pin < S3C2410_GPF(4)) + return (pin - S3C2410_GPF(0)) + IRQ_EINT0; - if (pin < S3C2410_GPG0) - return (pin - S3C2410_GPF4) + IRQ_EINT4; + if (pin < S3C2410_GPG(0)) + return (pin - S3C2410_GPF(4)) + IRQ_EINT4; - return (pin - S3C2410_GPG0) + IRQ_EINT8; + return (pin - S3C2410_GPG(0)) + IRQ_EINT8; } EXPORT_SYMBOL(s3c2410_gpio_getirq); - -int s3c2410_gpio_irq2pin(unsigned int irq) -{ - if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3) - return S3C2410_GPF0 + (irq - IRQ_EINT0); - - if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7) - return S3C2410_GPF4 + (irq - IRQ_EINT4); - - if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23) - return S3C2410_GPG0 + (irq - IRQ_EINT8); - - return -EINVAL; -} - -EXPORT_SYMBOL(s3c2410_gpio_irq2pin); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 5c0491bf738..6d7a961d326 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> +#include <linux/sysdev.h> #include <linux/ioport.h> #include <linux/io.h> #include <linux/gpio.h> @@ -22,6 +23,7 @@ #include <mach/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> +#include <plat/pm.h> #include <mach/regs-gpio.h> @@ -77,9 +79,10 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) struct s3c_gpio_chip s3c24xx_gpios[] = { [0] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPA0), + .base = S3C2410_GPACON, + .pm = __gpio_pm(&s3c_gpio_pm_1bit), .chip = { - .base = S3C2410_GPA0, + .base = S3C2410_GPA(0), .owner = THIS_MODULE, .label = "GPIOA", .ngpio = 24, @@ -88,45 +91,50 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }, [1] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPB0), + .base = S3C2410_GPBCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPB0, + .base = S3C2410_GPB(0), .owner = THIS_MODULE, .label = "GPIOB", .ngpio = 16, }, }, [2] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPC0), + .base = S3C2410_GPCCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPC0, + .base = S3C2410_GPC(0), .owner = THIS_MODULE, .label = "GPIOC", .ngpio = 16, }, }, [3] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPD0), + .base = S3C2410_GPDCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPD0, + .base = S3C2410_GPD(0), .owner = THIS_MODULE, .label = "GPIOD", .ngpio = 16, }, }, [4] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPE0), + .base = S3C2410_GPECON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPE0, + .base = S3C2410_GPE(0), .label = "GPIOE", .owner = THIS_MODULE, .ngpio = 16, }, }, [5] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPF0), + .base = S3C2410_GPFCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPF0, + .base = S3C2410_GPF(0), .owner = THIS_MODULE, .label = "GPIOF", .ngpio = 8, @@ -134,14 +142,24 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }, [6] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPG0), + .base = S3C2410_GPGCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPG0, + .base = S3C2410_GPG(0), .owner = THIS_MODULE, .label = "GPIOG", - .ngpio = 10, + .ngpio = 16, .to_irq = s3c24xx_gpiolib_bankg_toirq, }, + }, { + .base = S3C2410_GPHCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPH(0), + .owner = THIS_MODULE, + .label = "GPIOH", + .ngpio = 11, + }, }, }; @@ -156,4 +174,4 @@ static __init int s3c24xx_gpiolib_init(void) return 0; } -arch_initcall(s3c24xx_gpiolib_init); +core_initcall(s3c24xx_gpiolib_init); diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h index c78efe316fc..9565ead1bc9 100644 --- a/arch/arm/plat-s3c24xx/include/plat/dma.h +++ b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/dma.h +/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h * * Copyright (C) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -10,8 +10,10 @@ * published by the Free Software Foundation. */ +#include <plat/dma-core.h> + extern struct sysdev_class dma_sysclass; -extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; +extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; #define DMA_CH_VALID (1<<31) #define DMA_CH_NEVER (1<<30) @@ -31,8 +33,8 @@ struct s3c24xx_dma_map { const char *name; struct s3c24xx_dma_addr hw_addr; - unsigned long channels[S3C2410_DMA_CHANNELS]; - unsigned long channels_rx[S3C2410_DMA_CHANNELS]; + unsigned long channels[S3C_DMA_CHANNELS]; + unsigned long channels_rx[S3C_DMA_CHANNELS]; }; struct s3c24xx_dma_selection { @@ -58,7 +60,7 @@ extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); */ struct s3c24xx_dma_order_ch { - unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */ + unsigned int list[S3C_DMA_CHANNELS]; /* list of channels */ unsigned int flags; /* flags */ }; diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h index eed8f78e759..c4d133436fc 100644 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -58,7 +58,6 @@ #define S3C24XX_SZ_SPI SZ_1M #define S3C24XX_SZ_SDI SZ_1M #define S3C24XX_SZ_NAND SZ_1M -#define S3C24XX_SZ_USBHOST SZ_1M /* GPIO ports */ diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h index c75882113e0..fb45dd9adca 100644 --- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h @@ -57,3 +57,8 @@ static inline void s3c_pm_arch_show_resume_irqs(void) s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), s3c_irqwake_eintmask); } + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ +} diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h new file mode 100644 index 00000000000..3bc0a216df9 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h @@ -0,0 +1,145 @@ +/* arch/arm/mach-s3c2410/include/mach/dma.h + * + * Copyright (C) 2003,2004,2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C24XX DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* DMA Register definitions */ + +#define S3C2410_DMA_DISRC (0x00) +#define S3C2410_DMA_DISRCC (0x04) +#define S3C2410_DMA_DIDST (0x08) +#define S3C2410_DMA_DIDSTC (0x0C) +#define S3C2410_DMA_DCON (0x10) +#define S3C2410_DMA_DSTAT (0x14) +#define S3C2410_DMA_DCSRC (0x18) +#define S3C2410_DMA_DCDST (0x1C) +#define S3C2410_DMA_DMASKTRIG (0x20) +#define S3C2412_DMA_DMAREQSEL (0x24) +#define S3C2443_DMA_DMAREQSEL (0x24) + +#define S3C2410_DISRCC_INC (1<<0) +#define S3C2410_DISRCC_APB (1<<1) + +#define S3C2410_DMASKTRIG_STOP (1<<2) +#define S3C2410_DMASKTRIG_ON (1<<1) +#define S3C2410_DMASKTRIG_SWTRIG (1<<0) + +#define S3C2410_DCON_DEMAND (0<<31) +#define S3C2410_DCON_HANDSHAKE (1<<31) +#define S3C2410_DCON_SYNC_PCLK (0<<30) +#define S3C2410_DCON_SYNC_HCLK (1<<30) + +#define S3C2410_DCON_INTREQ (1<<29) + +#define S3C2410_DCON_CH0_XDREQ0 (0<<24) +#define S3C2410_DCON_CH0_UART0 (1<<24) +#define S3C2410_DCON_CH0_SDI (2<<24) +#define S3C2410_DCON_CH0_TIMER (3<<24) +#define S3C2410_DCON_CH0_USBEP1 (4<<24) + +#define S3C2410_DCON_CH1_XDREQ1 (0<<24) +#define S3C2410_DCON_CH1_UART1 (1<<24) +#define S3C2410_DCON_CH1_I2SSDI (2<<24) +#define S3C2410_DCON_CH1_SPI (3<<24) +#define S3C2410_DCON_CH1_USBEP2 (4<<24) + +#define S3C2410_DCON_CH2_I2SSDO (0<<24) +#define S3C2410_DCON_CH2_I2SSDI (1<<24) +#define S3C2410_DCON_CH2_SDI (2<<24) +#define S3C2410_DCON_CH2_TIMER (3<<24) +#define S3C2410_DCON_CH2_USBEP3 (4<<24) + +#define S3C2410_DCON_CH3_UART2 (0<<24) +#define S3C2410_DCON_CH3_SDI (1<<24) +#define S3C2410_DCON_CH3_SPI (2<<24) +#define S3C2410_DCON_CH3_TIMER (3<<24) +#define S3C2410_DCON_CH3_USBEP4 (4<<24) + +#define S3C2410_DCON_SRCSHIFT (24) +#define S3C2410_DCON_SRCMASK (7<<24) + +#define S3C2410_DCON_BYTE (0<<20) +#define S3C2410_DCON_HALFWORD (1<<20) +#define S3C2410_DCON_WORD (2<<20) + +#define S3C2410_DCON_AUTORELOAD (0<<22) +#define S3C2410_DCON_NORELOAD (1<<22) +#define S3C2410_DCON_HWTRIG (1<<23) + +#ifdef CONFIG_CPU_S3C2440 +#define S3C2440_DIDSTC_CHKINT (1<<2) + +#define S3C2440_DCON_CH0_I2SSDO (5<<24) +#define S3C2440_DCON_CH0_PCMIN (6<<24) + +#define S3C2440_DCON_CH1_PCMOUT (5<<24) +#define S3C2440_DCON_CH1_SDI (6<<24) + +#define S3C2440_DCON_CH2_PCMIN (5<<24) +#define S3C2440_DCON_CH2_MICIN (6<<24) + +#define S3C2440_DCON_CH3_MICIN (5<<24) +#define S3C2440_DCON_CH3_PCMOUT (6<<24) +#endif + +#ifdef CONFIG_CPU_S3C2412 + +#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) + +#define S3C2412_DMAREQSEL_HW (1) + +#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0) +#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1) +#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2) +#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3) +#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4) +#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5) +#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9) +#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10) +#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13) +#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14) +#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15) +#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16) +#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17) +#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18) +#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19) +#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20) +#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21) +#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) +#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) +#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) + +#endif + +#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) + +#define S3C2443_DMAREQSEL_HW (1) + +#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0) +#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1) +#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2) +#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3) +#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4) +#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5) +#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9) +#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10) +#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17) +#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18) +#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19) +#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20) +#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21) +#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22) +#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23) +#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24) +#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) +#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) +#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) +#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) +#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 062a29339a9..56e5253ca02 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -30,6 +30,7 @@ #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/serial_core.h> #include <linux/io.h> @@ -75,43 +76,10 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_CLKSLOW), }; -static struct gpio_sleep { - void __iomem *base; - unsigned int gpcon; - unsigned int gpdat; - unsigned int gpup; -} gpio_save[] = { - [0] = { - .base = S3C2410_GPACON, - }, - [1] = { - .base = S3C2410_GPBCON, - }, - [2] = { - .base = S3C2410_GPCCON, - }, - [3] = { - .base = S3C2410_GPDCON, - }, - [4] = { - .base = S3C2410_GPECON, - }, - [5] = { - .base = S3C2410_GPFCON, - }, - [6] = { - .base = S3C2410_GPGCON, - }, - [7] = { - .base = S3C2410_GPHCON, - }, -}; - static struct sleep_save misc_save[] = { SAVE_ITEM(S3C2410_DCLKCON), }; - /* s3c_pm_check_resume_pin * * check to see if the pin is configured correctly for sleep mode, and @@ -156,195 +124,15 @@ void s3c_pm_configure_extint(void) * and then configure it as an input if it is not */ - for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { - s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0); - } - - for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { - s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); + for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) { + s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0)); } -} - -/* offsets for CON/DAT/UP registers */ - -#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON) -#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON) -#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON) - -/* s3c_pm_save_gpios() - * - * Save the state of the GPIOs - */ - -void s3c_pm_save_gpios(void) -{ - struct gpio_sleep *gps = gpio_save; - unsigned int gpio; - - for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) { - void __iomem *base = gps->base; - - gps->gpcon = __raw_readl(base + OFFS_CON); - gps->gpdat = __raw_readl(base + OFFS_DAT); - - if (gpio > 0) - gps->gpup = __raw_readl(base + OFFS_UP); + for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) { + s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8); } } -/* Test whether the given masked+shifted bits of an GPIO configuration - * are one of the SFN (special function) modes. */ - -static inline int is_sfn(unsigned long con) -{ - return (con == 2 || con == 3); -} - -/* Test if the given masked+shifted GPIO configuration is an input */ - -static inline int is_in(unsigned long con) -{ - return con == 0; -} - -/* Test if the given masked+shifted GPIO configuration is an output */ - -static inline int is_out(unsigned long con) -{ - return con == 1; -} - -/** - * s3c2410_pm_restore_gpio() - restore the given GPIO bank - * @index: The number of the GPIO bank being resumed. - * @gps: The sleep confgiuration for the bank. - * - * Restore one of the GPIO banks that was saved during suspend. This is - * not as simple as once thought, due to the possibility of glitches - * from the order that the CON and DAT registers are set in. - * - * The three states the pin can be are {IN,OUT,SFN} which gives us 9 - * combinations of changes to check. Three of these, if the pin stays - * in the same configuration can be discounted. This leaves us with - * the following: - * - * { IN => OUT } Change DAT first - * { IN => SFN } Change CON first - * { OUT => SFN } Change CON first, so new data will not glitch - * { OUT => IN } Change CON first, so new data will not glitch - * { SFN => IN } Change CON first - * { SFN => OUT } Change DAT first, so new data will not glitch [1] - * - * We do not currently deal with the UP registers as these control - * weak resistors, so a small delay in change should not need to bring - * these into the calculations. - * - * [1] this assumes that writing to a pin DAT whilst in SFN will set the - * state for when it is next output. - */ - -static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps) -{ - void __iomem *base = gps->base; - unsigned long gps_gpcon = gps->gpcon; - unsigned long gps_gpdat = gps->gpdat; - unsigned long old_gpcon; - unsigned long old_gpdat; - unsigned long old_gpup = 0x0; - unsigned long gpcon; - int nr; - - old_gpcon = __raw_readl(base + OFFS_CON); - old_gpdat = __raw_readl(base + OFFS_DAT); - - if (base == S3C2410_GPACON) { - /* GPACON only has one bit per control / data and no PULLUPs. - * GPACON[x] = 0 => Output, 1 => SFN */ - - /* first set all SFN bits to SFN */ - - gpcon = old_gpcon | gps->gpcon; - __raw_writel(gpcon, base + OFFS_CON); - - /* now set all the other bits */ - - __raw_writel(gps_gpdat, base + OFFS_DAT); - __raw_writel(gps_gpcon, base + OFFS_CON); - } else { - unsigned long old, new, mask; - unsigned long change_mask = 0x0; - - old_gpup = __raw_readl(base + OFFS_UP); - - /* Create a change_mask of all the items that need to have - * their CON value changed before their DAT value, so that - * we minimise the work between the two settings. - */ - - for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) { - old = (old_gpcon & mask) >> nr; - new = (gps_gpcon & mask) >> nr; - - /* If there is no change, then skip */ - - if (old == new) - continue; - - /* If both are special function, then skip */ - - if (is_sfn(old) && is_sfn(new)) - continue; - - /* Change is IN => OUT, do not change now */ - - if (is_in(old) && is_out(new)) - continue; - - /* Change is SFN => OUT, do not change now */ - - if (is_sfn(old) && is_out(new)) - continue; - - /* We should now be at the case of IN=>SFN, - * OUT=>SFN, OUT=>IN, SFN=>IN. */ - - change_mask |= mask; - } - - /* Write the new CON settings */ - - gpcon = old_gpcon & ~change_mask; - gpcon |= gps_gpcon & change_mask; - - __raw_writel(gpcon, base + OFFS_CON); - - /* Now change any items that require DAT,CON */ - - __raw_writel(gps_gpdat, base + OFFS_DAT); - __raw_writel(gps_gpcon, base + OFFS_CON); - __raw_writel(gps->gpup, base + OFFS_UP); - } - - S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", - index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); -} - - -/** s3c2410_pm_restore_gpios() - * - * Restore the state of the GPIOs - */ - -void s3c_pm_restore_gpios(void) -{ - struct gpio_sleep *gps = gpio_save; - int gpio; - - for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) { - s3c2410_pm_restore_gpio(gpio, gps); - } -} void s3c_pm_restore_core(void) { diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c index d62b7e7fb35..71a6accf114 100644 --- a/arch/arm/plat-s3c24xx/setup-i2c.c +++ b/arch/arm/plat-s3c24xx/setup-i2c.c @@ -11,6 +11,7 @@ */ #include <linux/kernel.h> +#include <linux/gpio.h> struct platform_device; @@ -20,6 +21,6 @@ struct platform_device; void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA); - s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL); + s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA); + s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL); } diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 8b403cbb53d..9edf7894eed 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, int enable) { if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0); - s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0); - s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0); - s3c2410_gpio_pullup(S3C2410_GPE11, 0); - s3c2410_gpio_pullup(S3C2410_GPE13, 0); + s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); + s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); + s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); + s3c2410_gpio_pullup(S3C2410_GPE(11), 0); + s3c2410_gpio_pullup(S3C2410_GPE(13), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPE11, 1); - s3c2410_gpio_pullup(S3C2410_GPE12, 1); - s3c2410_gpio_pullup(S3C2410_GPE13, 1); + s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); + s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); + s3c2410_gpio_pullup(S3C2410_GPE(11), 1); + s3c2410_gpio_pullup(S3C2410_GPE(12), 1); + s3c2410_gpio_pullup(S3C2410_GPE(13), 1); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index 8fccd4e549f..f34d0fc69ad 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, int enable) { if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1); - s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1); - s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPG5, 0); - s3c2410_gpio_pullup(S3C2410_GPG6, 0); + s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); + s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); + s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); + s3c2410_gpio_pullup(S3C2410_GPG(5), 0); + s3c2410_gpio_pullup(S3C2410_GPG(6), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPG5, 1); - s3c2410_gpio_pullup(S3C2410_GPG6, 1); - s3c2410_gpio_pullup(S3C2410_GPG7, 1); + s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); + s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); + s3c2410_gpio_pullup(S3C2410_GPG(5), 1); + s3c2410_gpio_pullup(S3C2410_GPG(6), 1); + s3c2410_gpio_pullup(S3C2410_GPG(7), 1); } } |