13 files changed, 135 insertions, 2831 deletions

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index cd5f993612f..49a4c75243f 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -12,12 +12,14 @@ choice
 config ARCH_OMAP1
 	bool "TI OMAP1"
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	help
 	  "Systems based on omap7xx, omap15xx or omap16xx"
 
 config ARCH_OMAP2PLUS
 	bool "TI OMAP2/3/4"
 	select CLKDEV_LOOKUP
+	select GENERIC_IRQ_CHIP
 	select OMAP_DM_TIMER
 	help
 	  "Systems based on OMAP2, OMAP3 or OMAP4"
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index a4a12859fdd..f0233e6abcd 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
+obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
 	 usb.o fb.o io.o counter_32k.o
 obj-m :=
 obj-n :=
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
deleted file mode 100644
index d2adcdda23c..00000000000
--- a/arch/arm/plat-omap/gpio.c
+++ /dev/null
@@ -1,2128 +0,0 @@
-/*
- *  linux/arch/arm/plat-omap/gpio.c
- *
- * Support functions for OMAP GPIO
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <mach/gpio.h>
-#include <asm/mach/irq.h>
-
-/*
- * OMAP1510 GPIO registers
- */
-#define OMAP1510_GPIO_DATA_INPUT	0x00
-#define OMAP1510_GPIO_DATA_OUTPUT	0x04
-#define OMAP1510_GPIO_DIR_CONTROL	0x08
-#define OMAP1510_GPIO_INT_CONTROL	0x0c
-#define OMAP1510_GPIO_INT_MASK		0x10
-#define OMAP1510_GPIO_INT_STATUS	0x14
-#define OMAP1510_GPIO_PIN_CONTROL	0x18
-
-#define OMAP1510_IH_GPIO_BASE		64
-
-/*
- * OMAP1610 specific GPIO registers
- */
-#define OMAP1610_GPIO_REVISION		0x0000
-#define OMAP1610_GPIO_SYSCONFIG		0x0010
-#define OMAP1610_GPIO_SYSSTATUS		0x0014
-#define OMAP1610_GPIO_IRQSTATUS1	0x0018
-#define OMAP1610_GPIO_IRQENABLE1	0x001c
-#define OMAP1610_GPIO_WAKEUPENABLE	0x0028
-#define OMAP1610_GPIO_DATAIN		0x002c
-#define OMAP1610_GPIO_DATAOUT		0x0030
-#define OMAP1610_GPIO_DIRECTION		0x0034
-#define OMAP1610_GPIO_EDGE_CTRL1	0x0038
-#define OMAP1610_GPIO_EDGE_CTRL2	0x003c
-#define OMAP1610_GPIO_CLEAR_IRQENABLE1	0x009c
-#define OMAP1610_GPIO_CLEAR_WAKEUPENA	0x00a8
-#define OMAP1610_GPIO_CLEAR_DATAOUT	0x00b0
-#define OMAP1610_GPIO_SET_IRQENABLE1	0x00dc
-#define OMAP1610_GPIO_SET_WAKEUPENA	0x00e8
-#define OMAP1610_GPIO_SET_DATAOUT	0x00f0
-
-/*
- * OMAP7XX specific GPIO registers
- */
-#define OMAP7XX_GPIO_DATA_INPUT		0x00
-#define OMAP7XX_GPIO_DATA_OUTPUT	0x04
-#define OMAP7XX_GPIO_DIR_CONTROL	0x08
-#define OMAP7XX_GPIO_INT_CONTROL	0x0c
-#define OMAP7XX_GPIO_INT_MASK		0x10
-#define OMAP7XX_GPIO_INT_STATUS		0x14
-
-/*
- * omap2+ specific GPIO registers
- */
-#define OMAP24XX_GPIO_REVISION		0x0000
-#define OMAP24XX_GPIO_IRQSTATUS1	0x0018
-#define OMAP24XX_GPIO_IRQSTATUS2	0x0028
-#define OMAP24XX_GPIO_IRQENABLE2	0x002c
-#define OMAP24XX_GPIO_IRQENABLE1	0x001c
-#define OMAP24XX_GPIO_WAKE_EN		0x0020
-#define OMAP24XX_GPIO_CTRL		0x0030
-#define OMAP24XX_GPIO_OE		0x0034
-#define OMAP24XX_GPIO_DATAIN		0x0038
-#define OMAP24XX_GPIO_DATAOUT		0x003c
-#define OMAP24XX_GPIO_LEVELDETECT0	0x0040
-#define OMAP24XX_GPIO_LEVELDETECT1	0x0044
-#define OMAP24XX_GPIO_RISINGDETECT	0x0048
-#define OMAP24XX_GPIO_FALLINGDETECT	0x004c
-#define OMAP24XX_GPIO_DEBOUNCE_EN	0x0050
-#define OMAP24XX_GPIO_DEBOUNCE_VAL	0x0054
-#define OMAP24XX_GPIO_CLEARIRQENABLE1	0x0060
-#define OMAP24XX_GPIO_SETIRQENABLE1	0x0064
-#define OMAP24XX_GPIO_CLEARWKUENA	0x0080
-#define OMAP24XX_GPIO_SETWKUENA		0x0084
-#define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
-#define OMAP24XX_GPIO_SETDATAOUT	0x0094
-
-#define OMAP4_GPIO_REVISION		0x0000
-#define OMAP4_GPIO_EOI			0x0020
-#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
-#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
-#define OMAP4_GPIO_IRQSTATUS0		0x002c
-#define OMAP4_GPIO_IRQSTATUS1		0x0030
-#define OMAP4_GPIO_IRQSTATUSSET0	0x0034
-#define OMAP4_GPIO_IRQSTATUSSET1	0x0038
-#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c
-#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
-#define OMAP4_GPIO_IRQWAKEN0		0x0044
-#define OMAP4_GPIO_IRQWAKEN1		0x0048
-#define OMAP4_GPIO_IRQENABLE1		0x011c
-#define OMAP4_GPIO_WAKE_EN		0x0120
-#define OMAP4_GPIO_IRQSTATUS2		0x0128
-#define OMAP4_GPIO_IRQENABLE2		0x012c
-#define OMAP4_GPIO_CTRL			0x0130
-#define OMAP4_GPIO_OE			0x0134
-#define OMAP4_GPIO_DATAIN		0x0138
-#define OMAP4_GPIO_DATAOUT		0x013c
-#define OMAP4_GPIO_LEVELDETECT0		0x0140
-#define OMAP4_GPIO_LEVELDETECT1		0x0144
-#define OMAP4_GPIO_RISINGDETECT		0x0148
-#define OMAP4_GPIO_FALLINGDETECT	0x014c
-#define OMAP4_GPIO_DEBOUNCENABLE	0x0150
-#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
-#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160
-#define OMAP4_GPIO_SETIRQENABLE1	0x0164
-#define OMAP4_GPIO_CLEARWKUENA		0x0180
-#define OMAP4_GPIO_SETWKUENA		0x0184
-#define OMAP4_GPIO_CLEARDATAOUT		0x0190
-#define OMAP4_GPIO_SETDATAOUT		0x0194
-
-struct gpio_bank {
-	unsigned long pbase;
-	void __iomem *base;
-	u16 irq;
-	u16 virtual_irq_start;
-	int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-	u32 suspend_wakeup;
-	u32 saved_wakeup;
-#endif
-	u32 non_wakeup_gpios;
-	u32 enabled_non_wakeup_gpios;
-
-	u32 saved_datain;
-	u32 saved_fallingdetect;
-	u32 saved_risingdetect;
-	u32 level_mask;
-	u32 toggle_mask;
-	spinlock_t lock;
-	struct gpio_chip chip;
-	struct clk *dbck;
-	u32 mod_usage;
-	u32 dbck_enable_mask;
-	struct device *dev;
-	bool dbck_flag;
-	int stride;
-};
-
-#ifdef CONFIG_ARCH_OMAP3
-struct omap3_gpio_regs {
-	u32 irqenable1;
-	u32 irqenable2;
-	u32 wake_en;
-	u32 ctrl;
-	u32 oe;
-	u32 leveldetect0;
-	u32 leveldetect1;
-	u32 risingdetect;
-	u32 fallingdetect;
-	u32 dataout;
-};
-
-static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
-#endif
-
-/*
- * TODO: Cleanup gpio_bank usage as it is having information
- * related to all instances of the device
- */
-static struct gpio_bank *gpio_bank;
-
-static int bank_width;
-
-/* TODO: Analyze removing gpio_bank_count usage from driver code */
-int gpio_bank_count;
-
-static inline struct gpio_bank *get_gpio_bank(int gpio)
-{
-	if (cpu_is_omap15xx()) {
-		if (OMAP_GPIO_IS_MPUIO(gpio))
-			return &gpio_bank[0];
-		return &gpio_bank[1];
-	}
-	if (cpu_is_omap16xx()) {
-		if (OMAP_GPIO_IS_MPUIO(gpio))
-			return &gpio_bank[0];
-		return &gpio_bank[1 + (gpio >> 4)];
-	}
-	if (cpu_is_omap7xx()) {
-		if (OMAP_GPIO_IS_MPUIO(gpio))
-			return &gpio_bank[0];
-		return &gpio_bank[1 + (gpio >> 5)];
-	}
-	if (cpu_is_omap24xx())
-		return &gpio_bank[gpio >> 5];
-	if (cpu_is_omap34xx() || cpu_is_omap44xx())
-		return &gpio_bank[gpio >> 5];
-	BUG();
-	return NULL;
-}
-
-static inline int get_gpio_index(int gpio)
-{
-	if (cpu_is_omap7xx())
-		return gpio & 0x1f;
-	if (cpu_is_omap24xx())
-		return gpio & 0x1f;
-	if (cpu_is_omap34xx() || cpu_is_omap44xx())
-		return gpio & 0x1f;
-	return gpio & 0x0f;
-}
-
-static inline int gpio_valid(int gpio)
-{
-	if (gpio < 0)
-		return -1;
-	if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) {
-		if (gpio >= OMAP_MAX_GPIO_LINES + 16)
-			return -1;
-		return 0;
-	}
-	if (cpu_is_omap15xx() && gpio < 16)
-		return 0;
-	if ((cpu_is_omap16xx()) && gpio < 64)
-		return 0;
-	if (cpu_is_omap7xx() && gpio < 192)
-		return 0;
-	if (cpu_is_omap2420() && gpio < 128)
-		return 0;
-	if (cpu_is_omap2430() && gpio < 160)
-		return 0;
-	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
-		return 0;
-	return -1;
-}
-
-static int check_gpio(int gpio)
-{
-	if (unlikely(gpio_valid(gpio) < 0)) {
-		printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
-		dump_stack();
-		return -1;
-	}
-	return 0;
-}
-
-static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
-{
-	void __iomem *reg = bank->base;
-	u32 l;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DIR_CONTROL;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DIRECTION;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DIR_CONTROL;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_OE;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_OE;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
-	l = __raw_readl(reg);
-	if (is_input)
-		l |= 1 << gpio;
-	else
-		l &= ~(1 << gpio);
-	__raw_writel(l, reg);
-}
-
-static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
-{
-	void __iomem *reg = bank->base;
-	u32 l = 0;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_OUTPUT / bank->stride;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DATA_OUTPUT;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		if (enable)
-			reg += OMAP1610_GPIO_SET_DATAOUT;
-		else
-			reg += OMAP1610_GPIO_CLEAR_DATAOUT;
-		l = 1 << gpio;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DATA_OUTPUT;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		if (enable)
-			reg += OMAP24XX_GPIO_SETDATAOUT;
-		else
-			reg += OMAP24XX_GPIO_CLEARDATAOUT;
-		l = 1 << gpio;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		if (enable)
-			reg += OMAP4_GPIO_SETDATAOUT;
-		else
-			reg += OMAP4_GPIO_CLEARDATAOUT;
-		l = 1 << gpio;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
-	__raw_writel(l, reg);
-}
-
-static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
-{
-	void __iomem *reg;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-	reg = bank->base;
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DATA_INPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DATAIN;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DATA_INPUT;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_DATAIN;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_DATAIN;
-		break;
-#endif
-	default:
-		return -EINVAL;
-	}
-	return (__raw_readl(reg)
-			& (1 << get_gpio_index(gpio))) != 0;
-}
-
-static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
-{
-	void __iomem *reg;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-	reg = bank->base;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_OUTPUT / bank->stride;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DATA_OUTPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DATAOUT;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DATA_OUTPUT;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_DATAOUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_DATAOUT;
-		break;
-#endif
-	default:
-		return -EINVAL;
-	}
-
-	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
-}
-
-#define MOD_REG_BIT(reg, bit_mask, set)	\
-do {	\
-	int l = __raw_readl(base + reg); \
-	if (set) l |= bit_mask; \
-	else l &= ~bit_mask; \
-	__raw_writel(l, base + reg); \
-} while(0)
-
-/**
- * _set_gpio_debounce - low level gpio debounce time
- * @bank: the gpio bank we're acting upon
- * @gpio: the gpio number on this @gpio
- * @debounce: debounce time to use
- *
- * OMAP's debounce time is in 31us steps so we need
- * to convert and round up to the closest unit.
- */
-static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
-		unsigned debounce)
-{
-	void __iomem		*reg = bank->base;
-	u32			val;
-	u32			l;
-
-	if (!bank->dbck_flag)
-		return;
-
-	if (debounce < 32)
-		debounce = 0x01;
-	else if (debounce > 7936)
-		debounce = 0xff;
-	else
-		debounce = (debounce / 0x1f) - 1;
-
-	l = 1 << get_gpio_index(gpio);
-
-	if (bank->method == METHOD_GPIO_44XX)
-		reg += OMAP4_GPIO_DEBOUNCINGTIME;
-	else
-		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
-
-	__raw_writel(debounce, reg);
-
-	reg = bank->base;
-	if (bank->method == METHOD_GPIO_44XX)
-		reg += OMAP4_GPIO_DEBOUNCENABLE;
-	else
-		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
-
-	val = __raw_readl(reg);
-
-	if (debounce) {
-		val |= l;
-		clk_enable(bank->dbck);
-	} else {
-		val &= ~l;
-		clk_disable(bank->dbck);
-	}
-	bank->dbck_enable_mask = val;
-
-	__raw_writel(val, reg);
-}
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
-						int trigger)
-{
-	void __iomem *base = bank->base;
-	u32 gpio_bit = 1 << gpio;
-	u32 val;
-
-	if (cpu_is_omap44xx()) {
-		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_LOW);
-		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_HIGH);
-		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_RISING);
-		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_FALLING);
-	} else {
-		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_LOW);
-		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_HIGH);
-		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_RISING);
-		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_FALLING);
-	}
-	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
-		if (cpu_is_omap44xx()) {
-			if (trigger != 0)
-				__raw_writel(1 << gpio, bank->base+
-						OMAP4_GPIO_IRQWAKEN0);
-			else {
-				val = __raw_readl(bank->base +
-							OMAP4_GPIO_IRQWAKEN0);
-				__raw_writel(val & (~(1 << gpio)), bank->base +
-							 OMAP4_GPIO_IRQWAKEN0);
-			}
-		} else {
-			/*
-			 * GPIO wakeup request can only be generated on edge
-			 * transitions
-			 */
-			if (trigger & IRQ_TYPE_EDGE_BOTH)
-				__raw_writel(1 << gpio, bank->base
-					+ OMAP24XX_GPIO_SETWKUENA);
-			else
-				__raw_writel(1 << gpio, bank->base
-					+ OMAP24XX_GPIO_CLEARWKUENA);
-		}
-	}
-	/* This part needs to be executed always for OMAP34xx */
-	if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
-		/*
-		 * Log the edge gpio and manually trigger the IRQ
-		 * after resume if the input level changes
-		 * to avoid irq lost during PER RET/OFF mode
-		 * Applies for omap2 non-wakeup gpio and all omap3 gpios
-		 */
-		if (trigger & IRQ_TYPE_EDGE_BOTH)
-			bank->enabled_non_wakeup_gpios |= gpio_bit;
-		else
-			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
-	}
-
-	if (cpu_is_omap44xx()) {
-		bank->level_mask =
-			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
-			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
-	} else {
-		bank->level_mask =
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-	}
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-/*
- * This only applies to chips that can't do both rising and falling edge
- * detection at once.  For all other chips, this function is a noop.
- */
-static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
-{
-	void __iomem *reg = bank->base;
-	u32 l = 0;
-
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
-		break;
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_CONTROL;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_CONTROL;
-		break;
-#endif
-	default:
-		return;
-	}
-
-	l = __raw_readl(reg);
-	if ((l >> gpio) & 1)
-		l &= ~(1 << gpio);
-	else
-		l |= 1 << gpio;
-
-	__raw_writel(l, reg);
-}
-#endif
-
-static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
-{
-	void __iomem *reg = bank->base;
-	u32 l = 0;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
-		l = __raw_readl(reg);
-		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
-			bank->toggle_mask |= 1 << gpio;
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_CONTROL;
-		l = __raw_readl(reg);
-		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
-			bank->toggle_mask |= 1 << gpio;
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		if (gpio & 0x08)
-			reg += OMAP1610_GPIO_EDGE_CTRL2;
-		else
-			reg += OMAP1610_GPIO_EDGE_CTRL1;
-		gpio &= 0x07;
-		l = __raw_readl(reg);
-		l &= ~(3 << (gpio << 1));
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 2 << (gpio << 1);
-		if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l |= 1 << (gpio << 1);
-		if (trigger)
-			/* Enable wake-up during idle for dynamic tick */
-			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
-		else
-			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_CONTROL;
-		l = __raw_readl(reg);
-		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
-			bank->toggle_mask |= 1 << gpio;
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
-		set_24xx_gpio_triggering(bank, gpio, trigger);
-		return 0;
-#endif
-	default:
-		goto bad;
-	}
-	__raw_writel(l, reg);
-	return 0;
-bad:
-	return -EINVAL;
-}
-
-static int gpio_irq_type(struct irq_data *d, unsigned type)
-{
-	struct gpio_bank *bank;
-	unsigned gpio;
-	int retval;
-	unsigned long flags;
-
-	if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
-		gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-	else
-		gpio = d->irq - IH_GPIO_BASE;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-
-	if (type & ~IRQ_TYPE_SENSE_MASK)
-		return -EINVAL;
-
-	/* OMAP1 allows only only edge triggering */
-	if (!cpu_class_is_omap2()
-			&& (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
-		return -EINVAL;
-
-	bank = irq_data_get_irq_chip_data(d);
-	spin_lock_irqsave(&bank->lock, flags);
-	retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-
-	return retval;
-}
-
-static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
-{
-	void __iomem *reg = bank->base;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		/* MPUIO irqstatus is reset by reading the status register,
-		 * so do nothing here */
-		return;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_STATUS;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_IRQSTATUS1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_STATUS;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_IRQSTATUS1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_IRQSTATUS0;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
-	__raw_writel(gpio_mask, reg);
-
-	/* Workaround for clearing DSP GPIO interrupts to allow retention */
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-	else if (cpu_is_omap44xx())
-		reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		__raw_writel(gpio_mask, reg);
-
-	/* Flush posted write for the irq status to avoid spurious interrupts */
-	__raw_readl(reg);
-	}
-}
-
-static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
-{
-	_clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
-}
-
-static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
-{
-	void __iomem *reg = bank->base;
-	int inv = 0;
-	u32 l;
-	u32 mask;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-		mask = 0xffff;
-		inv = 1;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_MASK;
-		mask = 0xffff;
-		inv = 1;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_IRQENABLE1;
-		mask = 0xffff;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_MASK;
-		mask = 0xffffffff;
-		inv = 1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_IRQENABLE1;
-		mask = 0xffffffff;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_IRQSTATUSSET0;
-		mask = 0xffffffff;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return 0;
-	}
-
-	l = __raw_readl(reg);
-	if (inv)
-		l = ~l;
-	l &= mask;
-	return l;
-}
-
-static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
-{
-	void __iomem *reg = bank->base;
-	u32 l;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_MASK;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		if (enable)
-			reg += OMAP1610_GPIO_SET_IRQENABLE1;
-		else
-			reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
-		l = gpio_mask;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_MASK;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		if (enable)
-			reg += OMAP24XX_GPIO_SETIRQENABLE1;
-		else
-			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
-		l = gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		if (enable)
-			reg += OMAP4_GPIO_IRQSTATUSSET0;
-		else
-			reg += OMAP4_GPIO_IRQSTATUSCLR0;
-		l = gpio_mask;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
-	__raw_writel(l, reg);
-}
-
-static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
-{
-	_enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
-}
-
-/*
- * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
- * 1510 does not seem to have a wake-up register. If JTAG is connected
- * to the target, system will wake up always on GPIO events. While
- * system is running all registered GPIO interrupts need to have wake-up
- * enabled. When system is suspended, only selected GPIO interrupts need
- * to have wake-up enabled.
- */
-static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
-{
-	unsigned long uninitialized_var(flags);
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_MPUIO:
-	case METHOD_GPIO_1610:
-		spin_lock_irqsave(&bank->lock, flags);
-		if (enable)
-			bank->suspend_wakeup |= (1 << gpio);
-		else
-			bank->suspend_wakeup &= ~(1 << gpio);
-		spin_unlock_irqrestore(&bank->lock, flags);
-		return 0;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
-		if (bank->non_wakeup_gpios & (1 << gpio)) {
-			printk(KERN_ERR "Unable to modify wakeup on "
-					"non-wakeup GPIO%d\n",
-					(bank - gpio_bank) * 32 + gpio);
-			return -EINVAL;
-		}
-		spin_lock_irqsave(&bank->lock, flags);
-		if (enable)
-			bank->suspend_wakeup |= (1 << gpio);
-		else
-			bank->suspend_wakeup &= ~(1 << gpio);
-		spin_unlock_irqrestore(&bank->lock, flags);
-		return 0;
-#endif
-	default:
-		printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
-		       bank->method);
-		return -EINVAL;
-	}
-}
-
-static void _reset_gpio(struct gpio_bank *bank, int gpio)
-{
-	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
-	_set_gpio_irqenable(bank, gpio, 0);
-	_clear_gpio_irqstatus(bank, gpio);
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
-}
-
-/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
-static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
-{
-	unsigned int gpio = d->irq - IH_GPIO_BASE;
-	struct gpio_bank *bank;
-	int retval;
-
-	if (check_gpio(gpio) < 0)
-		return -ENODEV;
-	bank = irq_data_get_irq_chip_data(d);
-	retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
-
-	return retval;
-}
-
-static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
-	unsigned long flags;
-
-	spin_lock_irqsave(&bank->lock, flags);
-
-	/* Set trigger to none. You need to enable the desired trigger with
-	 * request_irq() or set_irq_type().
-	 */
-	_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (bank->method == METHOD_GPIO_1510) {
-		void __iomem *reg;
-
-		/* Claim the pin for MPU */
-		reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
-		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
-	}
-#endif
-	if (!cpu_class_is_omap1()) {
-		if (!bank->mod_usage) {
-			void __iomem *reg = bank->base;
-			u32 ctrl;
-
-			if (cpu_is_omap24xx() || cpu_is_omap34xx())
-				reg += OMAP24XX_GPIO_CTRL;
-			else if (cpu_is_omap44xx())
-				reg += OMAP4_GPIO_CTRL;
-			ctrl = __raw_readl(reg);
-			/* Module is enabled, clocks are not gated */
-			ctrl &= 0xFFFFFFFE;
-			__raw_writel(ctrl, reg);
-		}
-		bank->mod_usage |= 1 << offs