20 files changed, 344 insertions, 419 deletions

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index a94f0c44ebc..46d3b0b9ce6 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -14,9 +14,11 @@ config ARCH_OMAP1
 
 config ARCH_OMAP2
 	bool "TI OMAP2"
+	select CPU_V6
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
+	select CPU_V7
 
 endchoice
 
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index e31154b15d9..f6684832ca8 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -69,15 +69,15 @@ int __init debug_card_init(u32 addr, unsigned gpio)
 	smc91x_resources[0].start = addr + 0x300;
 	smc91x_resources[0].end   = addr + 0x30f;
 
-	smc91x_resources[1].start = OMAP_GPIO_IRQ(gpio);
-	smc91x_resources[1].end   = OMAP_GPIO_IRQ(gpio);
+	smc91x_resources[1].start = gpio_to_irq(gpio);
+	smc91x_resources[1].end   = gpio_to_irq(gpio);
 
-	status = omap_request_gpio(gpio);
+	status = gpio_request(gpio, "SMC91x irq");
 	if (status < 0) {
 		printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
 		return status;
 	}
-	omap_set_gpio_direction(gpio, 1);
+	gpio_direction_input(gpio);
 
 	led_resources[0].start = addr;
 	led_resources[0].end   = addr + SZ_4K - 1;
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 2f4c0cabfd3..be4eefda476 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -83,8 +83,8 @@ static void h2p2_dbg_leds_event(led_event_t evt)
 		/* all leds off during suspend or shutdown */
 
 		if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
-			omap_set_gpio_dataout(GPIO_TIMER, 0);
-			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			gpio_set_value(GPIO_TIMER, 0);
+			gpio_set_value(GPIO_IDLE, 0);
 		}
 
 		__raw_writew(~0, &fpga->leds);
@@ -107,7 +107,7 @@ static void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2() || machine_is_omap_h4())
 			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
 		else {
-			omap_set_gpio_dataout(GPIO_TIMER,
+			gpio_set_value(GPIO_TIMER,
 					led_state & LED_TIMER_ON);
 			goto done;
 		}
@@ -121,7 +121,7 @@ static void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2() || machine_is_omap_h4())
 			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
 		else {
-			omap_set_gpio_dataout(GPIO_IDLE, 1);
+			gpio_set_value(GPIO_IDLE, 1);
 			goto done;
 		}
 
@@ -131,7 +131,7 @@ static void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2() || machine_is_omap_h4())
 			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
 		else {
-			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			gpio_set_value(GPIO_IDLE, 0);
 			goto done;
 		}
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 0cb2b22388e..ac15c23fd5d 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -192,202 +192,48 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define	OMAP_MMC1_BASE		0x4809c000
-#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x1fc)
-#define	OMAP_MMC1_INT		INT_24XX_MMC_IRQ
+#define OMAP_MMC_NR_RES		2
 
-#define	OMAP_MMC2_BASE		0x480b4000
-#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x1fc)
-#define	OMAP_MMC2_INT		INT_24XX_MMC2_IRQ
-
-#else
-
-#define	OMAP_MMC1_BASE		0xfffb7800
-#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x7f)
-#define OMAP_MMC1_INT		INT_MMC
-
-#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
-#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x7f)
-#define	OMAP_MMC2_INT		INT_1610_MMC2
-
-#endif
-
-static struct omap_mmc_platform_data mmc1_data;
-
-static u64 mmc1_dmamask = 0xffffffff;
-
-static struct resource mmc1_resources[] = {
-	{
-		.start		= OMAP_MMC1_BASE,
-		.end		= OMAP_MMC1_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP_MMC1_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device1 = {
-	.name		= "mmci-omap",
-	.id		= 1,
-	.dev = {
-		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_data,
-	},
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-	.resource	= mmc1_resources,
-};
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
-	defined(CONFIG_ARCH_OMAP34XX)
-
-static struct omap_mmc_platform_data mmc2_data;
-
-static u64 mmc2_dmamask = 0xffffffff;
-
-static struct resource mmc2_resources[] = {
-	{
-		.start		= OMAP_MMC2_BASE,
-		.end		= OMAP_MMC2_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP_MMC2_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device2 = {
-	.name		= "mmci-omap",
-	.id		= 2,
-	.dev = {
-		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_data,
-	},
-	.num_resources	= ARRAY_SIZE(mmc2_resources),
-	.resource	= mmc2_resources,
-};
-#endif
-
-static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
-{
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
-		return;
-
-	if (mmc_conf->mmc[0].enabled) {
-		if (cpu_is_omap24xx()) {
-			omap_cfg_reg(H18_24XX_MMC_CMD);
-			omap_cfg_reg(H15_24XX_MMC_CLKI);
-			omap_cfg_reg(G19_24XX_MMC_CLKO);
-			omap_cfg_reg(F20_24XX_MMC_DAT0);
-			omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
-			omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
-		} else {
-			omap_cfg_reg(MMC_CMD);
-			omap_cfg_reg(MMC_CLK);
-			omap_cfg_reg(MMC_DAT0);
-			if (cpu_is_omap1710()) {
-				omap_cfg_reg(M15_1710_MMC_CLKI);
-				omap_cfg_reg(P19_1710_MMC_CMDDIR);
-				omap_cfg_reg(P20_1710_MMC_DATDIR0);
-			}
-		}
-		if (mmc_conf->mmc[0].wire4) {
-			if (cpu_is_omap24xx()) {
-				omap_cfg_reg(H14_24XX_MMC_DAT1);
-				omap_cfg_reg(E19_24XX_MMC_DAT2);
-				omap_cfg_reg(D19_24XX_MMC_DAT3);
-				omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
-				omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
-				omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
-			} else {
-				omap_cfg_reg(MMC_DAT1);
-				/* NOTE:  DAT2 can be on W10 (here) or M15 */
-				if (!mmc_conf->mmc[0].nomux)
-					omap_cfg_reg(MMC_DAT2);
-				omap_cfg_reg(MMC_DAT3);
-			}
-		}
-	}
-
-#ifdef	CONFIG_ARCH_OMAP16XX
-	/* block 2 is on newer chips, and has many pinout options */
-	if (mmc_conf->mmc[1].enabled) {
-		if (!mmc_conf->mmc[1].nomux) {
-			omap_cfg_reg(Y8_1610_MMC2_CMD);
-			omap_cfg_reg(Y10_1610_MMC2_CLK);
-			omap_cfg_reg(R18_1610_MMC2_CLKIN);
-			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc_conf->mmc[1].wire4) {
-				omap_cfg_reg(V8_1610_MMC2_DAT1);
-				omap_cfg_reg(W15_1610_MMC2_DAT2);
-				omap_cfg_reg(R10_1610_MMC2_DAT3);
-			}
-
-			/* These are needed for the level shifter */
-			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
-			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
-			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
-		}
-
-		/* Feedback clock must be set on OMAP-1710 MMC2 */
-		if (cpu_is_omap1710())
-			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
-				     MOD_CONF_CTRL_1);
-	}
-#endif
-}
-
-static void __init omap_init_mmc(void)
+/*
+ * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
+ */
+int __init omap_mmc_add(int id, unsigned long base, unsigned long size,
+		unsigned int irq, struct omap_mmc_platform_data *data)
 {
-	const struct omap_mmc_config	*mmc_conf;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
-		return;
-
-	omap_init_mmc_conf(mmc_conf);
-
-	if (mmc_conf->mmc[0].enabled) {
-		mmc1_data.conf = mmc_conf->mmc[0];
-		(void) platform_device_register(&mmc_omap_device1);
-	}
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
-	defined(CONFIG_ARCH_OMAP34XX)
-	if (mmc_conf->mmc[1].enabled) {
-		mmc2_data.conf = mmc_conf->mmc[1];
-		(void) platform_device_register(&mmc_omap_device2);
-	}
-#endif
-}
+	struct platform_device *pdev;
+	struct resource res[OMAP_MMC_NR_RES];
+	int ret;
+
+	pdev = platform_device_alloc("mmci-omap", id);
+	if (!pdev)
+		return -ENOMEM;
+
+	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
+	res[0].start = base;
+	res[0].end = base + size - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = res[1].end = irq;
+	res[1].flags = IORESOURCE_IRQ;
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret == 0)
+		ret = platform_device_add_data(pdev, data, sizeof(*data));
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto fail;
+	return 0;
 
-void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
-{
-	switch (host) {
-	case 1:
-		mmc1_data = *info;
-		break;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
-	defined(CONFIG_ARCH_OMAP34XX)
-	case 2:
-		mmc2_data = *info;
-		break;
-#endif
-	default:
-		BUG();
-	}
+fail:
+	platform_device_put(pdev);
+	return ret;
 }
 
-#else
-static inline void omap_init_mmc(void) {}
-void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -532,7 +378,6 @@ static int __init omap_init_devices(void)
 	 */
 	omap_init_dsp();
 	omap_init_kp();
-	omap_init_mmc();
 	omap_init_uwire();
 	omap_init_wdt();
 	omap_init_rng();
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 50f8b4ad9a0..692d2b495af 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -29,7 +29,7 @@
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #include <mach/tc.h>
 
@@ -1848,9 +1848,22 @@ static int omap2_dma_handle_ch(int ch)
 		printk(KERN_INFO
 		       "DMA synchronization event drop occurred with device "
 		       "%d\n", dma_chan[ch].dev_id);
-	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
+	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
 		printk(KERN_INFO "DMA transaction error with device %d\n",
 		       dma_chan[ch].dev_id);
+		if (cpu_class_is_omap2()) {
+			/* Errata: sDMA Channel is not disabled
+			 * after a transaction error. So we explicitely
+			 * disable the channel
+			 */
+			u32 ccr;
+
+			ccr = dma_read(CCR(ch));
+			ccr &= ~OMAP_DMA_CCR_EN;
+			dma_write(ccr, CCR(ch));
+			dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
+		}
+	}
 	if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
 		printk(KERN_INFO "DMA secure error with device %d\n",
 		       dma_chan[ch].dev_id);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 963c31cd154..e4f0ce04ba9 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -539,10 +539,6 @@ void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
 
-	/* REVISIT: hw feature, ttgr overtaking tldr? */
-	while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)))
-		cpu_relax();
-
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
 
@@ -553,14 +549,15 @@ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
 	u32 l;
 
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	if (autoreload)
+	if (autoreload) {
 		l |= OMAP_TIMER_CTRL_AR;
-	else
+		omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+	} else {
 		l &= ~OMAP_TIMER_CTRL_AR;
+	}
 	l |= OMAP_TIMER_CTRL_ST;
 
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 424049d83fb..07b6968a7d1 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -152,6 +152,7 @@ struct gpio_bank {
 	u32 level_mask;
 	spinlock_t lock;
 	struct gpio_chip chip;
+	struct clk *dbck;
 };
 
 #define METHOD_MPUIO		0
@@ -244,6 +245,8 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 		return &gpio_bank[gpio >> 5];
 	if (cpu_is_omap34xx())
 		return &gpio_bank[gpio >> 5];
+	BUG();
+	return NULL;
 }
 
 static inline int get_gpio_index(int gpio)
@@ -332,19 +335,6 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 	__raw_writel(l, reg);
 }
 
-void omap_set_gpio_direction(int gpio, int is_input)
-{
-	struct gpio_bank *bank;
-	unsigned long flags;
-
-	if (check_gpio(gpio) < 0)
-		return;
-	bank = get_gpio_bank(gpio);
-	spin_lock_irqsave(&bank->lock, flags);
-	_set_gpio_direction(bank, get_gpio_index(gpio), is_input);
-	spin_unlock_irqrestore(&bank->lock, flags);
-}
-
 static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 {
 	void __iomem *reg = bank->base;
@@ -406,20 +396,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 	__raw_writel(l, reg);
 }
 
-void omap_set_gpio_dataout(int gpio, int enable)
-{
-	struct gpio_bank *bank;
-	unsigned long flags;
-
-	if (check_gpio(gpio) < 0)
-		return;
-	bank = get_gpio_bank(gpio);
-	spin_lock_irqsave(&bank->lock, flags);
-	_set_gpio_dataout(bank, get_gpio_index(gpio), enable);
-	spin_unlock_irqrestore(&bank->lock, flags);
-}
-
-int omap_get_gpio_datain(int gpio)
+static int __omap_get_gpio_datain(int gpio)
 {
 	struct gpio_bank *bank;
 	void __iomem *reg;
@@ -473,6 +450,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
 {
 	struct gpio_bank *bank;
 	void __iomem *reg;
+	unsigned long flags;
 	u32 val, l = 1 << get_gpio_index(gpio);
 
 	if (cpu_class_is_omap1())
@@ -480,16 +458,28 @@ void omap_set_gpio_debounce(int gpio, int enable)
 
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
-
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+
+	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
 
-	if (enable)
+	if (enable && !(val & l))
 		val |= l;
-	else
+	else if (!enable && (val & l))
 		val &= ~l;
+	else
+		goto done;
+
+	if (cpu_is_omap34xx()) {
+		if (enable)
+			clk_enable(bank->dbck);
+		else
+			clk_disable(bank->dbck);
+	}
 
 	__raw_writel(val, reg);
+done:
+	spin_unlock_irqrestore(&bank->lock, flags);
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce);
 
@@ -906,26 +896,17 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable)
 	return retval;
 }
 
-int omap_request_gpio(int gpio)
+static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 {
-	struct gpio_bank *bank;
+	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
 	unsigned long flags;
-	int status;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
 
-	status = gpio_request(gpio, NULL);
-	if (status < 0)
-		return status;
-
-	bank = get_gpio_bank(gpio);
 	spin_lock_irqsave(&bank->lock, flags);
 
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
 	 */
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+	_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510) {
@@ -933,7 +914,7 @@ int omap_request_gpio(int gpio)
 
 		/* Claim the pin for MPU */
 		reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
-		__raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg);
+		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
 	}
 #endif
 	spin_unlock_irqrestore(&bank->lock, flags);
@@ -941,39 +922,28 @@ int omap_request_gpio(int gpio)
 	return 0;
 }
 
-void omap_free_gpio(int gpio)
+static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 {
-	struct gpio_bank *bank;
+	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
 	unsigned long flags;
 
-	if (check_gpio(gpio) < 0)
-		return;
-	bank = get_gpio_bank(gpio);
 	spin_lock_irqsave(&bank->lock, flags);
-	if (unlikely(!gpiochip_is_requested(&bank->chip,
-				get_gpio_index(gpio)))) {
-		spin_unlock_irqrestore(&bank->lock, flags);
-		printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio);
-		dump_stack();
-		return;
-	}
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (bank->method == METHOD_GPIO_1610) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
-		__raw_writel(1 << get_gpio_index(gpio), reg);
+		__raw_writel(1 << offset, reg);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
-		__raw_writel(1 << get_gpio_index(gpio), reg);
+		__raw_writel(1 << offset, reg);
 	}
 #endif
-	_reset_gpio(bank, gpio);
+	_reset_gpio(bank, bank->chip.base + offset);
 	spin_unlock_irqrestore(&bank->lock, flags);
-	gpio_free(gpio);
 }
 
 /*
@@ -1252,7 +1222,7 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
 
 static int gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return omap_get_gpio_datain(chip->base + offset);
+	return __omap_get_gpio_datain(chip->base + offset);
 }
 
 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
@@ -1279,6 +1249,14 @@ static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
+static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	return bank->virtual_irq_start + offset;
+}
+
 /*---------------------------------------------------------------------*/
 
 static int initialized;
@@ -1296,7 +1274,6 @@ static struct clk * gpio5_fck;
 #endif
 
 #if defined(CONFIG_ARCH_OMAP3)
-static struct clk *gpio_fclks[OMAP34XX_NR_GPIOS];
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
@@ -1310,9 +1287,7 @@ static int __init _omap_gpio_init(void)
 	int i;
 	int gpio = 0;
 	struct gpio_bank *bank;
-#if defined(CONFIG_ARCH_OMAP3)
 	char clk_name[11];
-#endif
 
 	initialized = 1;
 
@@ -1367,12 +1342,6 @@ static int __init _omap_gpio_init(void)
 				printk(KERN_ERR "Could not get %s\n", clk_name);
 			else
 				clk_enable(gpio_iclks[i]);
-			sprintf(clk_name, "gpio%d_fck", i + 1);
-			gpio_fclks[i] = clk_get(NULL, clk_name);
-			if (IS_ERR(gpio_fclks[i]))
-				printk(KERN_ERR "Could not get %s\n", clk_name);
-			else
-				clk_enable(gpio_fclks[i]);
 		}
 	}
 #endif
@@ -1479,10 +1448,13 @@ static int __init _omap_gpio_init(void)
 		/* REVISIT eventually switch from OMAP-specific gpio structs
 		 * over to the generic ones
 		 */
+		bank->chip.request = omap_gpio_request;
+		bank->chip.free = omap_gpio_free;
 		bank->chip.direction_input = gpio_input;
 		bank->chip.get = gpio_get;
 		bank->chip.direction_output = gpio_output;
 		bank->chip.set = gpio_set;
+		bank->chip.to_irq = gpio_2irq;
 		if (bank_is_mpuio(bank)) {
 			bank->chip.label = "mpuio";
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -1511,6 +1483,13 @@ static int __init _omap_gpio_init(void)
 		}
 		set_irq_chained_handler(bank->irq, gpio_irq_handler);
 		set_irq_data(bank->irq, bank);
+
+		if (cpu_is_omap34xx()) {
+			sprintf(clk_name, "gpio%d_dbck", i + 1);
+			bank->dbck = clk_get(NULL, clk_name);
+			if (IS_ERR(bank->dbck))
+				printk(KERN_ERR "Could not get %s\n", clk_name);
+		}
 	}
 
 	/* Enable system clock for GPIO module.
@@ -1739,12 +1718,6 @@ static int __init omap_gpio_sysinit(void)
 	return ret;
 }
 
-EXPORT_SYMBOL(omap_request_gpio);
-EXPORT_SYMBOL(omap_free_gpio);
-EXPORT_SYMBOL(omap_set_gpio_direction);
-EXPORT_SYMBOL(omap_set_gpio_dataout);
-EXPORT_SYMBOL(omap_get_gpio_datain);
-
 arch_initcall(omap_gpio_sysinit);
 
 
@@ -1801,14 +1774,14 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 				continue;
 
 			irq = bank->virtual_irq_start + j;
-			value = omap_get_gpio_datain(gpio);
+			value = gpio_get_value(gpio);
 			is_in = gpio_is_input(bank, mask);
 
 			if (bank_is_mpuio(bank))
 				seq_printf(s, "MPUIO %2d ", j);
 			else
 				seq_printf(s, "GPIO %3d ", gpio);
-			seq_printf(s, "(%10s): %s %s",
+			seq_printf(s, "(%-20.20s): %s %s",
 					label,
 					is_in ? "in " : "out",
 					value ? "hi"  : "lo");
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 0e6d147ab6f..89a6ab0b7db 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -79,26 +79,43 @@ static struct platform_device omap_i2c_devices[] = {
 #endif
 };
 
-static void __init omap_i2c_mux_pins(int bus_id)
+#if defined(CONFIG_ARCH_OMAP24XX)
+static const int omap24xx_pins[][2] = {
+	{ M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
+	{ J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
+};
+#else
+static const int omap24xx_pins[][2] = {};
+#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+static const int omap34xx_pins[][2] = {
+	{ K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA},
+	{ AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA},
+	{ AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA},
+};
+#else
+static const int omap34xx_pins[][2] = {};
+#endif
+
+static void __init omap_i2c_mux_pins(int bus)
 {
-	/* TODO: Muxing for OMAP3 */
-	switch (bus_id) {
-	case 1:
-		if (cpu_class_is_omap1()) {
-			omap_cfg_reg(I2C_SCL);
-			omap_cfg_reg(I2C_SDA);
-		} else if (cpu_is_omap24xx()) {
-			omap_cfg_reg(M19_24XX_I2C1_SCL);
-			omap_cfg_reg(L15_24XX_I2C1_SDA);
-		}
-		break;
-	case 2:
-		if (cpu_is_omap24xx()) {
-			omap_cfg_reg(J15_24XX_I2C2_SCL);
-			omap_cfg_reg(H19_24XX_I2C2_SDA);
-		}
-		break;
+	int scl, sda;
+
+	if (cpu_class_is_omap1()) {
+		scl = I2C_SCL;
+		sda = I2C_SDA;
+	} else if (cpu_is_omap24xx()) {
+		scl = omap24xx_pins[bus][0];
+		sda = omap24xx_pins[bus][1];
+	} else if (cpu_is_omap34xx()) {
+		scl = omap34xx_pins[bus][0];
+		sda = omap34xx_pins[bus][1];
+	} else {
+		return;
 	}
+
+	omap_cfg_reg(sda);
+	omap_cfg_reg(scl);
 }
 
 int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
@@ -142,6 +159,6 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 		res[1].start = irq;
 	}
 
-	omap_i2c_mux_pins(bus_id);
+	omap_i2c_mux_pins(bus_id - 1);
 	return platform_device_register(pdev);
 }
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index 731c858cf3f..61bd5e8f09b 100644
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -29,12 +29,14 @@
 #ifndef __ASM_ARCH_OMAP_APOLLON_H
 #define __ASM_ARCH_OMAP_APOLLON_H
 
+#include <mach/cpu.h>
+
 extern void apollon_mmc_init(void);
 
 static inline int apollon_plus(void)
 {
 	/* The apollon plus has IDCODE revision 5 */
-	return system_rev & 0xc0;
+	return omap_rev() & 0xc0;
 }
 
 /* Placeholder for APOLLON specific defines */
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h
index 2a050e9be65..15531c8dc0e 100644
--- a/arch/arm/plat-omap/include/mach/board-h2.h
+++ b/arch/arm/plat-omap/include/mach/board-h2.h
@@ -29,13 +29,13 @@
 #ifndef __ASM_ARCH_OMAP_H2_H
 #define __ASM_ARCH_OMAP_H2_H
 
-/* Placeholder for H2 specific defines */
-
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define OMAP1610_ETHR_START		0x04000300
 
+#define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
+
 extern void h2_mmc_init(void);
-extern void h2_mmc_slot_cover_handler(void *arg, int state);
 
 #endif /*  __ASM_ARCH_OMAP_H2_H */
 
diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
index 66e2746c04c..f2339966521 100644
--- a/arch/arm/plat-omap/include/mach/board-ldp.h
+++ b/arch/arm/plat-omap/include/mach/board-ldp.h
@@ -32,5 +32,8 @@
 extern void twl4030_bci_battery_init(void);
 
 #define TWL4030_IRQNUM		INT_34XX_SYS_NIRQ
-
+#define LDP_SMC911X_CS         1
+#define LDP_SMC911X_GPIO       152
+#define DEBUG_BASE             0x08000000
+#define OMAP34XX_ETHR_START    DEBUG_BASE
 #endif /* __ASM_ARCH_OMAP_LDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index c23c12ccb35..9466772fc7c 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -16,7 +16,6 @@
 
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_MMC		0x4f02
 #define OMAP_TAG_SERIAL_CONSOLE 0x4f03
 #define OMAP_TAG_USB		0x4f04
 #define OMAP_TAG_LCD		0x4f05
@@ -35,27 +34,6 @@ struct omap_clock_config {
 	u8 system_clock_type;
 };
 
-struct omap_mmc_conf {
-	unsigned enabled:1;
-	/* nomux means "standard" muxing is wrong on this board, and that
-	 * board-specific code handled it before common init logic.
-	 */
-	unsigned nomux:1;
-	/* switch pin can be for card detect (default) or card cover */
-	unsigned cover:1;
-	/* 4 wire signaling is optional, and is only used for SD/SDIO */
-	unsigned wire4:1;
-	/* use the internal clock */
-	unsigned internal_clock:1;
-	s16 power_pin;
-	s16 switch_pin;
-	s16 wp_pin;
-};
-
-struct omap_mmc_config {
-	struct omap_mmc_conf mmc[2];
-};
-
 struct omap_serial_console_config {
 	u8 console_uart;
 	u32 console_speed;
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index dc988676057..269147f3836 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -74,6 +74,7 @@
 #define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
 #define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
+#define OMAP243X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x0230)
 
 /* 24xx-only CONTROL_GENERAL register offsets */
 #define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
@@ -140,6 +141,7 @@
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02b0)
 #define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
 
 /*
@@ -154,11 +156,14 @@
  * and the security mode (secure, non-secure, don't care)
  */
 /* CONTROL_DEVCONF0 bits */
+#define OMAP2_MMCSDIO1ADPCLKISEL	(1 << 24) /* MMC1 loop back clock */
 #define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
 #define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
 #define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
 
 /* CONTROL_DEVCONF1 bits */
+#define OMAP243X_MMC1_ACTIVE_OVERWRITE	(1 << 31)
+#define OMAP2_MMCSDIO2ADPCLKISEL	(1 << 6) /* MMC2 loop back clock */
 #define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
 #define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
 #define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
@@ -172,6 +177,18 @@
 #define OMAP2_SYSBOOT_1_MASK		(1 << 1)
 #define OMAP2_SYSBOOT_0_MASK		(1 << 0)
 
+/* CONTROL_PBIAS_LITE bits */
+#define OMAP343X_PBIASLITESUPPLY_HIGH1	(1 << 15)
+#define OMAP343X_PBIASLITEVMODEERROR1	(1 << 11)
+#define OMAP343X_PBIASSPEEDCTRL1	(1 << 10)
+#define OMAP343X_PBIASLITEPWRDNZ1	(1 << 9)
+#define OMAP343X_PBIASLITEVMODE1	(1 << 8)
+#define OMAP343X_PBIASLITESUPPLY_HIGH0	(1 << 7)
+#define OMAP343X_PBIASLITEVMODEERROR0	(1 << 3)
+#define OMAP2_PBIASSPEEDCTRL0		(1 << 2)
+#define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
+#define OMAP2_PBIASLITEVMODE0		(1 << 0)
+
 #ifndef __ASSEMBLY__
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 extern void __iomem *omap_ctrl_base_get(void);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index e0464187209..b2062f1175d 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -28,13 +28,18 @@
 
 struct omap_chip_id {
 	u8 oc;
+	u8 type;
 };
 
 #define OMAP_CHIP_INIT(x)	{ .oc = x }
 
-extern unsigned int system_rev;
-
-#define omap2_cpu_rev()		((system_rev >> 12) & 0x0f)
+/*
+ * omap_rev bits:
+ * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
+ * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
+ */
+unsigned int omap_rev(void);
 
 /*
  * Test if multicore OMAP support is needed
@@ -108,7 +113,7 @@ extern unsigned int system_rev;
  * cpu_is_omap243x():	True for OMAP2430
  * cpu_is_omap343x():	True for OMAP3430
  */
-#define GET_OMAP_CLASS	((system_rev >> 24) & 0xff)
+#define GET_OMAP_CLASS	(omap_rev() & 0xff)
 
 #define IS_OMAP_CLASS(class, id)			\
 static inline int is_omap ##class (void)		\
@@ -116,7 +121,7 @@ static inline int is_omap ##class (void)		\
 	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
 }
 
-#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
+#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
 
 #define IS_OMAP_SUBCLASS(subclass, id)			\
 static inline int is_omap ##subclass (void)		\
@@ -226,7 +231,7 @@ IS_OMAP_SUBCLASS(343x, 0x343)
  * cpu_is_omap2430():	True for OMAP2430
  * cpu_is_omap3430():	True for OMAP3430
  */
-#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
+#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
 
 #define IS_OMAP_TYPE(type, id)				\
 static inline int is_omap ##type (void)			\
@@ -320,44 +325,20 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-/*
- * Macros to detect silicon revision of OMAP2/3 processors.
- * is_sil_rev_greater_than:	true if passed cpu type & its rev is greater.
- * is_sil_rev_lesser_than:	true if passed cpu type & its rev is lesser.
- * is_sil_rev_equal_to:		true if passed cpu type & its rev is equal.
- * get_sil_rev:			return the silicon rev value.
- */
-#define get_sil_omap_type(rev)	((rev & 0xffff0000) >> 16)
-#define get_sil_revision(rev)	((rev & 0x0000f000) >> 12)
 
-#define is_sil_rev_greater_than(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) > get_sil_revision(rev)))
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS		0x24200024
+#define OMAP2420_REV_ES1_0	0x24200024
+#define OMAP2420_REV_ES2_0	0x24201024
 
-#define is_sil_rev_less_than(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) < get_sil_revision(rev)))
+#define OMAP243X_CLASS		0x24300024
+#define OMAP2430_REV_ES1_0	0x24300024
 
-#define is_sil_rev_equal_to(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) == get_sil_revision(rev)))
-
-#define get_sil_rev() \
-		get_sil_revision(system_rev)
-
-/* Various silicon macros defined here */
-#define OMAP242X_CLASS		0x24200000
-#define OMAP2420_REV_ES1_0	0x24200000
-#define OMAP2420_REV_ES2_0	0x24201000
-
-#define OMAP243X_CLASS		0x24300000
-#define OMAP2430_REV_ES1_0	0x24300000
-
-#define OMAP343X_CLASS		0x34300000
-#define OMAP3430_REV_ES1_0	0x34300000
-#define OMAP3430_REV_ES2_0	0x34301000
-#define OMAP3430_REV_ES2_1	0x34302000
-#define OMAP3430_REV_ES2_2	0x34303000
+#define OMAP343X_CLASS		0x34300034
+#define OMAP3430_REV_ES1_0	0x34300034
+#define OMAP3430_REV_ES2_0	0x34301034
+#define OMAP3430_REV_ES2_1	0x34302034
+#define OMAP3430_REV_ES3_0	0x34303034
 
 /*
  * omap_chip bits
@@ -382,23 +363,16 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
 int omap_chip_is(struct omap_chip_id oci);
-
+int omap_type(void);
 
 /*
  * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
  */
-#define DEVICE_TYPE_TEST	0
-#define DEVICE_TYPE_EMU		1
-#define DEVICE_TYPE_SEC		2
-#define DEVICE_TYPE_GP		3
-#define DEVICE_TYPE_BAD		4
-
-#define get_device_type()	((system_rev & 0x700) >> 8)
-#define is_device_type_test()	(get_device_type() == DEVICE_TYPE_TEST)
-#define is_device_type_emu()	(get_device_type() == DEVICE_TYPE_EMU)
-#define is_device_type_sec()	(get_device_type() == DEVICE_TYPE_SEC)
-#define is_device_type_gp()	(get_device_type() == DEVICE_TYPE_GP)
-#define is_device_type_bad()	(get_device_type() == DEVICE_TYPE_BAD)
+#define OMAP2_DEVICE_TYPE_TEST		0
+#define OMAP2_DEVICE_TYPE_EMU		1
+#define OMAP2_DEVICE_TYPE_SEC		2
+#define OMAP2_DEVICE_TYPE_GP		3
+#define OMAP2_DEVICE_TYPE_BAD		4
 
 void omap2_check_revision(void);
 
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 98e9008b7e9..04e68e88f13 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -71,11 +71,6 @@
 				 IH_GPIO_BASE + (nr))
 
 extern int omap_gpio_init(void);	/* Call from board init only */
-extern int omap_request_gpio(int gpio);
-extern void omap_free_gpio(int gpio);
-extern void omap_set_gpio_direction(int gpio, int is_input);
-extern void omap_set_gpio_dataout(int gpio, int enable);
-extern int omap_get_gpio_datain(int gpio);
 extern void omap2_gpio_prepare_for_retention(void);
 extern void omap2_gpio_resume_after_retention(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
@@ -92,6 +87,16 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable);
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
 
+static inline int omap_request_gpio(int gpio)
+{
+	return gpio_request(gpio, "FIXME");
+}
+
+static inline void omap_free_gpio(int gpio)
+{
+	gpio_free(gpio);
+}
+
 static inline int gpio_get_value(unsigned gpio)
 {
 	return __gpio_get_value(gpio);
@@ -109,16 +114,24 @@ static inline int gpio_cansleep(unsigned gpio)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	if (gpio < (OMAP_MAX_GPIO_LINES + 16))
-		return OMAP_GPIO_IRQ(gpio);
-	return -EINVAL;
+	return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
+	int tmp;
+
+	/* omap1 SOC mpuio */
 	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
 		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
-	return irq - IH_GPIO_BASE;
+
+	/* SOC gpio */
+	tmp = irq - IH_GPIO_BASE;
+	if (tmp < OMAP_MAX_GPIO_LINES)
+		return tmp;
+
+	/* we don't supply reverse mappings for non-SOC gpios */
+	return -EIO;
 }
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index adc83b7b820..d92bf796448 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -42,8 +42,8 @@
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
  */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 /*
  * ----------------------------------------------------------------------------
@@ -51,8 +51,6 @@
  * ----------------------------------------------------------------------------
  */
 
-#define PCIO_BASE	0
-
 #if defined(CONFIG_ARCH_OMAP1)
 
 #define IO_PHYS			0xFFFB0000
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index d40cac60b95..211c9f6619e 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -43,18 +43,7 @@
 #endif
 
 /*
- * Conversion between SDRAM and fake PCI bus, used by USB
- * NOTE: Physical address must be converted to Local Bus address
- *	 on OMAP-1510 only
- */
-
-/*
  * Bus address is physical address, except for OMAP-1510 Local Bus.
- */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
  * OMAP-1510 bus address is translated into a Local Bus address if the
  * OMAP bus type is lbus. We do the address translation based on the
  * device overriding the defaults used in the dma-mapping API.
@@ -74,16 +63,16 @@
 
 #define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
 					(dma_addr_t)virt_to_lbus(page_address(page)) : \
-					(dma_addr_t)__virt_to_bus(page_address(page));})
+					(dma_addr_t)__virt_to_phys(page_address(page));})
 
 #define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
 						lbus_to_virt(addr) : \
-						__bus_to_virt(addr)); })
+						__phys_to_virt(addr)); })
 
 #define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
 					   (dma_addr_t) (is_lbus_device(dev) ? \
 						virt_to_lbus(__addr) : \
-						__virt_to_bus(__addr)); })
+						__virt_to_phys(__addr)); })
 
 #endif	/* CONFIG_ARCH_OMAP15XX */
 
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index fc15d13058f..031250f0280 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -17,12 +17,28 @@
 
 #include <mach/board.h>
 
+#define OMAP15XX_NR_MMC		1
+#define OMAP16XX_NR_MMC		2
+#define OMAP1_MMC_SIZE		0x080
+#define OMAP1_MMC1_BASE		0xfffb7800
+#define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+
+#define OMAP24XX_NR_MMC		2
+#define OMAP34XX_NR_MMC		3
+#define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
+#define HSMMC_SIZE		0x200
+#define OMAP2_MMC1_BASE		0x4809c000
+#define OMAP2_MMC2_BASE		0x480b4000
+#define OMAP3_MMC3_BASE		0x480ad000
+#define HSMMC3			(1 << 2)
+#define HSMMC2			(1 << 1)
+#define HSMMC1			(1 << 0)
+
 #define OMAP_MMC_MAX_SLOTS	2
 
 struct omap_mmc_platform_data {
-	struct omap_mmc_conf	conf;
 
-	/* number of slots on board */
+	/* number of slots per controller */
 	unsigned nr_slots:2;
 
 	/* set if your board has components or wiring that limits the
@@ -41,7 +57,31 @@ struct omap_mmc_platform_data {
 	int (*suspend)(struct device *dev, int slot);
 	int (*resume)(struct device *dev, int slot);
 
+	u64 dma_mask;
+
 	struct omap_mmc_slot_data {
+
+		/* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC;
+		 * 8 wire signaling is also optional, and is used with HSMMC
+		 */
+		u8 wires;
+
+		/*
+		 * nomux means "standard" muxing is wrong on this board, and
+		 * that board-specific code handled it before common init logic.
+		 */
+		unsigned nomux:1;
+
+		/* switch pin can be for card detect (default) or card cover */
+		unsigned cover:1;
+
+		/* use the internal clock */
+		unsigned internal_clock:1;
+		s16 power_pin;
+
+		int switch_pin;			/* gpio (card detect) */
+		int gpio_wp;			/* gpio (write protect) */
+
 		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
 		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
 		int (* get_ro)(struct device *dev, int slot);
@@ -49,8 +89,8 @@ struct omap_mmc_platform_data {
 		/* return MMC cover switch state, can be NULL if not supported.
 		 *
 		 * possible return values:
-		 *   0 - open
-		 *   1 - closed
+		 *   0 - closed
+		 *   1 - open
 		 */
 		int (* get_cover_state)(struct device *dev, int slot);
 
@@ -66,9 +106,31 @@ struct omap_mmc_platform_data {
 	} slots[OMAP_MMC_MAX_SLOTS];
 };
 
-extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
-
 /* called from board-specific card detection service routine */
 extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
 
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers);
+void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers);
+int omap_mmc_add(int id, unsigned long base, unsigned long size,
+			unsigned int irq, struct omap_mmc_platform_data *data);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers)
+{
+}
+static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers)
+{
+}
+static inline int omap_mmc_add(int id, unsigned long base, unsigned long size,
+		unsigned int irq, struct omap_mmc_platform_data *data)
+{
+	return 0;
+}
+
+#endif
 #endif
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 6bbf1789bed..f4362b8682c 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -632,6 +632,15 @@ enum omap24xx_index {
 	AC7_2430_USB0HS_DATA7,
 
 	/* 2430 McBSP */
+	AD6_2430_MCBSP_CLKS,
+
+	AB2_2430_MCBSP1_CLKR,
+	AD5_2430_MCBSP1_FSR,
+	AA1_2430_MCBSP1_DX,
+	AF3_2430_MCBSP1_DR,
+	AB3_2430_MCBSP1_FSX,
+	Y9_2430_MCBSP1_CLKX,
+
 	AC10_2430_MCBSP2_FSX,
 	AD16_2430_MCBSP2_CLX,
 	AE13_2430_MCBSP2_DX,
@@ -641,6 +650,30 @@ enum omap24xx_index {
 	AE13_2430_MCBSP2_DX_OFF,
 	AD13_2430_MCBSP2_DR_OFF,
 
+	AC9_2430_MCBSP3_CLKX,
+	AE4_2430_MCBSP3_FSX,
+	AE2_2430_MCBSP3_DR,
+	AF4_2430_MCBSP3_DX,
+
+	N3_2430_MCBSP4_CLKX,
+	AD23_2430_MCBSP4_DR,
+	AB25_2430_MCBSP4_DX,
+	AC25_2430_MCBSP4_FSX,
+
+	AE16_2430_MCBSP5_CLKX,
+	AF12_2430_MCBSP5_FSX,
+	K7_2430_MCBSP5_DX,
+	M1_2430_MCBSP5_DR,
+
+	/* 2430 McSPI*/
+	Y18_2430_MCSPI1_CLK,
+	AD15_2430_MCSPI1_SIMO,
+	AE17_2430_MCSPI1_SOMI,
+	U1_2430_MCSPI1_CS0,
+
+	/* Touchscreen GPIO */
+	AF19_2430_GPIO_85,
+
 };
 
 enum omap34xx_index {
@@ -749,6 +782,14 @@ enum omap34xx_index {
 	AD2_3430_USB3FS_PHY_MM3_TXDAT,
 	AC1_3430_USB3FS_PHY_MM3_TXEN_N,
 
+	/* 34xx GPIO
+	 *  - normally these are bidirectional, no internal pullup/pulldown
+	 *  - "_UP" suffix (GPIO3_UP) if internal pullup is configured
+	 *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
+	 *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
+	 */
+	AH8_34XX_GPIO29,
+	J25_34XX_GPIO170,
 };
 
 struct omap_mux_cfg {
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index dcd9d16da2e..be7bcaf2b83 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -24,6 +24,7 @@
 
 #include <mach/sram.h>
 #include <mach/board.h>
+#include <mach/cpu.h>
 
 #include <mach/control.h>
 
@@ -87,7 +88,7 @@ static int is_sram_locked(void)
 	int type = 0;
 
 	if (cpu_is_omap242x())
-		type = system_rev & OMAP2_DEVICETYPE_MASK;
+		type = omap_rev() & OMAP2_DEVICETYPE_MASK;
 
 	if (type == GP_DEVICE) {
 		/* RAMFW: R/W access to all initiators for all qualifier sets */