diff options
Diffstat (limited to 'arch/arm/plat-nomadik/timer.c')
| -rw-r--r-- | arch/arm/plat-nomadik/timer.c | 33 |
1 files changed, 12 insertions, 21 deletions
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index ea3ca86c528..aedf9c1d645 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-nomadik/timer.c + * linux/arch/arm/plat-nomadik/timer.c * * Copyright (C) 2008 STMicroelectronics * Copyright (C) 2010 Alessandro Rubini @@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, cr = readl(mtu_base + MTU_CR(1)); writel(0, mtu_base + MTU_LR(1)); writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1)); - writel(0x2, mtu_base + MTU_IMSC); + writel(1 << 1, mtu_base + MTU_IMSC); break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: @@ -131,25 +131,23 @@ void __init nmdk_timer_init(void) { unsigned long rate; struct clk *clk0; - struct clk *clk1; - u32 cr; + u32 cr = MTU_CRn_32BITS; clk0 = clk_get_sys("mtu0", NULL); BUG_ON(IS_ERR(clk0)); - clk1 = clk_get_sys("mtu1", NULL); - BUG_ON(IS_ERR(clk1)); - clk_enable(clk0); - clk_enable(clk1); /* - * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: - * use a divide-by-16 counter if it's more than 16MHz + * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz + * for ux500. + * Use a divide-by-16 counter if the tick rate is more than 32MHz. + * At 32 MHz, the timer (with 32 bit counter) can be programmed + * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer + * with 16 gives too low timer resolution. */ - cr = MTU_CRn_32BITS;; rate = clk_get_rate(clk0); - if (rate > 16 << 20) { + if (rate > 32000000) { rate /= 16; cr |= MTU_CRn_PRESCALE_16; } else { @@ -170,15 +168,8 @@ void __init nmdk_timer_init(void) pr_err("timer: failed to initialize clock source %s\n", nmdk_clksrc.name); - /* Timer 1 is used for events, fix according to rate */ - cr = MTU_CRn_32BITS; - rate = clk_get_rate(clk1); - if (rate > 16 << 20) { - rate /= 16; - cr |= MTU_CRn_PRESCALE_16; - } else { - cr |= MTU_CRn_PRESCALE_1; - } + /* Timer 1 is used for events */ + clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ |