diff options
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500-pins.c')
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-pins.c | 18 |
1 files changed, 17 insertions, 1 deletions
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index dccd29d6fff..32fd9920446 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -32,12 +32,14 @@ static enum custom_pin_cfg_t pinsfor; BIAS(pd, PIN_PULL_DOWN); BIAS(slpm_gpio_nopull, PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); BIAS(in_nopull, PIN_INPUT_NOPULL); +BIAS(in_nopull_sleep_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE); BIAS(in_pu, PIN_INPUT_PULLUP); BIAS(in_pd, PIN_INPUT_PULLDOWN); BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP); BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW); BIAS(out_hi, PIN_OUTPUT_HIGH); BIAS(out_lo, PIN_OUTPUT_LOW); +BIAS(out_lo_sleep_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); /* These also force them into GPIO mode */ BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED); BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED); @@ -47,7 +49,9 @@ BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); /* Sleep modes */ BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(sleep_in_nopull_wkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE); BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(sleep_out_lo_wkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); /* We use these to define hog settings that are always done on boot */ @@ -129,11 +133,23 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */ DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ - /* Sleep state for UART0 */ + /* UART0 sleep state */ DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"), DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"), DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"), DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"), + /* MSP1 for ALSA codec */ + DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"), + DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"), + DB8500_PIN("GPIO33_AF2", out_lo_sleep_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO34_AE1", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO35_AE2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO36_AG2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), + /* MSP1 sleep state */ + DB8500_PIN_SLEEP("GPIO33_AF2", sleep_out_lo_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO34_AE1", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO35_AE2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO36_AG2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */ DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), |