aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-u300/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-u300/include')
-rw-r--r--arch/arm/mach-u300/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-u300/include/mach/coh901318.h267
-rw-r--r--arch/arm/mach-u300/include/mach/debug-macro.S21
-rw-r--r--arch/arm/mach-u300/include/mach/dma_channels.h69
-rw-r--r--arch/arm/mach-u300/include/mach/entry-macro.S40
-rw-r--r--arch/arm/mach-u300/include/mach/gpio.h294
-rw-r--r--arch/arm/mach-u300/include/mach/hardware.h5
-rw-r--r--arch/arm/mach-u300/include/mach/io.h20
-rw-r--r--arch/arm/mach-u300/include/mach/irqs.h121
-rw-r--r--arch/arm/mach-u300/include/mach/memory.h42
-rw-r--r--arch/arm/mach-u300/include/mach/platform.h19
-rw-r--r--arch/arm/mach-u300/include/mach/syscon.h750
-rw-r--r--arch/arm/mach-u300/include/mach/system.h42
-rw-r--r--arch/arm/mach-u300/include/mach/timex.h17
-rw-r--r--arch/arm/mach-u300/include/mach/u300-regs.h185
-rw-r--r--arch/arm/mach-u300/include/mach/uncompress.h46
-rw-r--r--arch/arm/mach-u300/include/mach/vmalloc.h12
17 files changed, 0 insertions, 1957 deletions
diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h
deleted file mode 100644
index 92e3cc872c6..00000000000
--- a/arch/arm/mach-u300/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-int __clk_get(struct clk *clk);
-void __clk_put(struct clk *clk);
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
deleted file mode 100644
index 7c3b2b2d25b..00000000000
--- a/arch/arm/mach-u300/include/mach/coh901318.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *
- * include/linux/coh901318.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * DMA driver for COH 901 318
- * Author: Per Friden <per.friden@stericsson.com>
- */
-
-#ifndef COH901318_H
-#define COH901318_H
-
-#include <linux/device.h>
-#include <linux/dmaengine.h>
-
-#define MAX_DMA_PACKET_SIZE_SHIFT 11
-#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT)
-
-/**
- * struct coh901318_lli - linked list item for DMAC
- * @control: control settings for DMAC
- * @src_addr: transfer source address
- * @dst_addr: transfer destination address
- * @link_addr: physical address to next lli
- * @virt_link_addr: virtual address of next lli (only used by pool_free)
- * @phy_this: physical address of current lli (only used by pool_free)
- */
-struct coh901318_lli {
- u32 control;
- dma_addr_t src_addr;
- dma_addr_t dst_addr;
- dma_addr_t link_addr;
-
- void *virt_link_addr;
- dma_addr_t phy_this;
-};
-/**
- * struct coh901318_params - parameters for DMAC configuration
- * @config: DMA config register
- * @ctrl_lli_last: DMA control register for the last lli in the list
- * @ctrl_lli: DMA control register for an lli
- * @ctrl_lli_chained: DMA control register for a chained lli
- */
-struct coh901318_params {
- u32 config;
- u32 ctrl_lli_last;
- u32 ctrl_lli;
- u32 ctrl_lli_chained;
-};
-/**
- * struct coh_dma_channel - dma channel base
- * @name: ascii name of dma channel
- * @number: channel id number
- * @desc_nbr_max: number of preallocated descriptors
- * @priority_high: prio of channel, 0 low otherwise high.
- * @param: configuration parameters
- * @dev_addr: physical address of periphal connected to channel
- */
-struct coh_dma_channel {
- const char name[32];
- const int number;
- const int desc_nbr_max;
- const int priority_high;
- const struct coh901318_params param;
- const dma_addr_t dev_addr;
-};
-
-/**
- * dma_access_memory_state_t - register dma for memory access
- *
- * @dev: The dma device
- * @active: 1 means dma intends to access memory
- * 0 means dma wont access memory
- */
-typedef void (*dma_access_memory_state_t)(struct device *dev,
- bool active);
-
-/**
- * struct powersave - DMA power save structure
- * @lock: lock protecting data in this struct
- * @started_channels: bit mask indicating active dma channels
- */
-struct powersave {
- spinlock_t lock;
- u64 started_channels;
-};
-/**
- * struct coh901318_platform - platform arch structure
- * @chans_slave: specifying dma slave channels
- * @chans_memcpy: specifying dma memcpy channels
- * @access_memory_state: requesting DMA memory access (on / off)
- * @chan_conf: dma channel configurations
- * @max_channels: max number of dma chanenls
- */
-struct coh901318_platform {
- const int *chans_slave;
- const int *chans_memcpy;
- const dma_access_memory_state_t access_memory_state;
- const struct coh_dma_channel *chan_conf;
- const int max_channels;
-};
-
-#ifdef CONFIG_COH901318
-/**
- * coh901318_filter_id() - DMA channel filter function
- * @chan: dma channel handle
- * @chan_id: id of dma channel to be filter out
- *
- * In dma_request_channel() it specifies what channel id to be requested
- */
-bool coh901318_filter_id(struct dma_chan *chan, void *chan_id);
-#else
-static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id)
-{
- return false;
-}
-#endif
-
-/*
- * DMA Controller - this access the static mappings of the coh901318 dma.
- *
- */
-
-#define COH901318_MOD32_MASK (0x1F)
-#define COH901318_WORD_MASK (0xFFFFFFFF)
-/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
-#define COH901318_INT_STATUS1 (0x0000)
-#define COH901318_INT_STATUS2 (0x0004)
-/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_TC_INT_STATUS1 (0x0008)
-#define COH901318_TC_INT_STATUS2 (0x000C)
-/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
-#define COH901318_TC_INT_CLEAR1 (0x0010)
-#define COH901318_TC_INT_CLEAR2 (0x0014)
-/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_RAW_TC_INT_STATUS1 (0x0018)
-#define COH901318_RAW_TC_INT_STATUS2 (0x001C)
-/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
-#define COH901318_BE_INT_STATUS1 (0x0020)
-#define COH901318_BE_INT_STATUS2 (0x0024)
-/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
-#define COH901318_BE_INT_CLEAR1 (0x0028)
-#define COH901318_BE_INT_CLEAR2 (0x002C)
-/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_RAW_BE_INT_STATUS1 (0x0030)
-#define COH901318_RAW_BE_INT_STATUS2 (0x0034)
-
-/*
- * CX_CFG - Channel Configuration Registers 32bit (R/W)
- */
-#define COH901318_CX_CFG (0x0100)
-#define COH901318_CX_CFG_SPACING (0x04)
-/* Channel enable activates tha dma job */
-#define COH901318_CX_CFG_CH_ENABLE (0x00000001)
-#define COH901318_CX_CFG_CH_DISABLE (0x00000000)
-/* Request Mode */
-#define COH901318_CX_CFG_RM_MASK (0x00000006)
-#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY (0x0 << 1)
-#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY (0x1 << 1)
-#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY (0x1 << 1)
-#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY (0x3 << 1)
-#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY (0x3 << 1)
-/* Linked channel request field. RM must == 11 */
-#define COH901318_CX_CFG_LCRF_SHIFT 3
-#define COH901318_CX_CFG_LCRF_MASK (0x000001F8)
-#define COH901318_CX_CFG_LCR_DISABLE (0x00000000)
-/* Terminal Counter Interrupt Request Mask */
-#define COH901318_CX_CFG_TC_IRQ_ENABLE (0x00000200)
-#define COH901318_CX_CFG_TC_IRQ_DISABLE (0x00000000)
-/* Bus Error interrupt Mask */
-#define COH901318_CX_CFG_BE_IRQ_ENABLE (0x00000400)
-#define COH901318_CX_CFG_BE_IRQ_DISABLE (0x00000000)
-
-/*
- * CX_STAT - Channel Status Registers 32bit (R/-)
- */
-#define COH901318_CX_STAT (0x0200)
-#define COH901318_CX_STAT_SPACING (0x04)
-#define COH901318_CX_STAT_RBE_IRQ_IND (0x00000008)
-#define COH901318_CX_STAT_RTC_IRQ_IND (0x00000004)
-#define COH901318_CX_STAT_ACTIVE (0x00000002)
-#define COH901318_CX_STAT_ENABLED (0x00000001)
-
-/*
- * CX_CTRL - Channel Control Registers 32bit (R/W)
- */
-#define COH901318_CX_CTRL (0x0400)
-#define COH901318_CX_CTRL_SPACING (0x10)
-/* Transfer Count Enable */
-#define COH901318_CX_CTRL_TC_ENABLE (0x00001000)
-#define COH901318_CX_CTRL_TC_DISABLE (0x00000000)
-/* Transfer Count Value 0 - 4095 */
-#define COH901318_CX_CTRL_TC_VALUE_MASK (0x00000FFF)
-/* Burst count */
-#define COH901318_CX_CTRL_BURST_COUNT_MASK (0x0000E000)
-#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES (0x7 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES (0x6 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES (0x5 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES (0x4 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES (0x3 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES (0x2 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES (0x1 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE (0x0 << 13)
-/* Source bus size */
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK (0x00030000)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS (0x2 << 16)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS (0x1 << 16)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS (0x0 << 16)
-/* Source address increment */
-#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE (0x00040000)
-#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE (0x00000000)
-/* Destination Bus Size */
-#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK (0x00180000)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS (0x2 << 19)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS (0x1 << 19)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS (0x0 << 19)
-/* Destination address increment */
-#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE (0x00200000)
-#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE (0x00000000)
-/* Master Mode (Master2 is only connected to MSL) */
-#define COH901318_CX_CTRL_MASTER_MODE_MASK (0x00C00000)
-#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W (0x3 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W (0x2 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M2RW (0x1 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M1RW (0x0 << 22)
-/* Terminal Count flag to PER enable */
-#define COH901318_CX_CTRL_TCP_ENABLE (0x01000000)
-#define COH901318_CX_CTRL_TCP_DISABLE (0x00000000)
-/* Terminal Count flags to CPU enable */
-#define COH901318_CX_CTRL_TC_IRQ_ENABLE (0x02000000)
-#define COH901318_CX_CTRL_TC_IRQ_DISABLE (0x00000000)
-/* Hand shake to peripheral */
-#define COH901318_CX_CTRL_HSP_ENABLE (0x04000000)
-#define COH901318_CX_CTRL_HSP_DISABLE (0x00000000)
-#define COH901318_CX_CTRL_HSS_ENABLE (0x08000000)
-#define COH901318_CX_CTRL_HSS_DISABLE (0x00000000)
-/* DMA mode */
-#define COH901318_CX_CTRL_DDMA_MASK (0x30000000)
-#define COH901318_CX_CTRL_DDMA_LEGACY (0x0 << 28)
-#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1 (0x1 << 28)
-#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2 (0x2 << 28)
-/* Primary Request Data Destination */
-#define COH901318_CX_CTRL_PRDD_MASK (0x40000000)
-#define COH901318_CX_CTRL_PRDD_DEST (0x1 << 30)
-#define COH901318_CX_CTRL_PRDD_SOURCE (0x0 << 30)
-
-/*
- * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
- */
-#define COH901318_CX_SRC_ADDR (0x0404)
-#define COH901318_CX_SRC_ADDR_SPACING (0x10)
-
-/*
- * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
- */
-#define COH901318_CX_DST_ADDR (0x0408)
-#define COH901318_CX_DST_ADDR_SPACING (0x10)
-
-/*
- * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
- */
-#define COH901318_CX_LNK_ADDR (0x040C)
-#define COH901318_CX_LNK_ADDR_SPACING (0x10)
-#define COH901318_CX_LNK_LINK_IMMEDIATE (0x00000001)
-#endif /* COH901318_H */
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
deleted file mode 100644
index df715707bea..00000000000
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *
- * arch-arm/mach-u300/include/mach/debug-macro.S
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Debugging macro include header.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <mach/hardware.h>
-
- .macro addruart, rp, rv
- /* If we move the address using MMU, use this. */
- ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
- ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
- orr \rp, \rp, #0x00003000
- orr \rv, \rv, #0x00003000
- .endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/include/mach/dma_channels.h
deleted file mode 100644
index b239149ba0d..00000000000
--- a/arch/arm/mach-u300/include/mach/dma_channels.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/dma_channels.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Map file for the U300 dma driver.
- * Author: Per Friden <per.friden@stericsson.com>
- */
-
-#ifndef DMA_CHANNELS_H
-#define DMA_CHANNELS_H
-
-#define U300_DMA_MSL_TX_0 0
-#define U300_DMA_MSL_TX_1 1
-#define U300_DMA_MSL_TX_2 2
-#define U300_DMA_MSL_TX_3 3
-#define U300_DMA_MSL_TX_4 4
-#define U300_DMA_MSL_TX_5 5
-#define U300_DMA_MSL_TX_6 6
-#define U300_DMA_MSL_RX_0 7
-#define U300_DMA_MSL_RX_1 8
-#define U300_DMA_MSL_RX_2 9
-#define U300_DMA_MSL_RX_3 10
-#define U300_DMA_MSL_RX_4 11
-#define U300_DMA_MSL_RX_5 12
-#define U300_DMA_MSL_RX_6 13
-#define U300_DMA_MMCSD_RX_TX 14
-#define U300_DMA_MSPRO_TX 15
-#define U300_DMA_MSPRO_RX 16
-#define U300_DMA_UART0_TX 17
-#define U300_DMA_UART0_RX 18
-#define U300_DMA_APEX_TX 19
-#define U300_DMA_APEX_RX 20
-#define U300_DMA_PCM_I2S0_TX 21
-#define U300_DMA_PCM_I2S0_RX 22
-#define U300_DMA_PCM_I2S1_TX 23
-#define U300_DMA_PCM_I2S1_RX 24
-#define U300_DMA_XGAM_CDI 25
-#define U300_DMA_XGAM_PDI 26
-#define U300_DMA_SPI_TX 27
-#define U300_DMA_SPI_RX 28
-#define U300_DMA_GENERAL_PURPOSE_0 29
-#define U300_DMA_GENERAL_PURPOSE_1 30
-#define U300_DMA_GENERAL_PURPOSE_2 31
-#define U300_DMA_GENERAL_PURPOSE_3 32
-#define U300_DMA_GENERAL_PURPOSE_4 33
-#define U300_DMA_GENERAL_PURPOSE_5 34
-#define U300_DMA_GENERAL_PURPOSE_6 35
-#define U300_DMA_GENERAL_PURPOSE_7 36
-#define U300_DMA_GENERAL_PURPOSE_8 37
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_DMA_UART1_TX 38
-#define U300_DMA_UART1_RX 39
-#else
-#define U300_DMA_GENERAL_PURPOSE_9 38
-#define U300_DMA_GENERAL_PURPOSE_10 39
-#endif
-
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_DMA_DEVICE_CHANNELS 32
-#else
-#define U300_DMA_DEVICE_CHANNELS 30
-#endif
-#define U300_DMA_CHANNELS 40
-
-
-#endif /* DMA_CHANNELS_H */
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
deleted file mode 100644
index 20731ae39d3..00000000000
--- a/arch/arm/mach-u300/include/mach/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *
- * arch-arm/mach-u300/include/mach/entry-macro.S
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Low-level IRQ helper macros for ST-Ericsson U300
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #0
- teq \irqstat, #0
- bne 1002f
-1001: ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #32
- teq \irqstat, #0
- beq 1003f
-1002: tst \irqstat, #1
- bne 1003f
- add \irqnr, \irqnr, #1
- movs \irqstat, \irqstat, lsr #1
- bne 1002b
-1003: /* EQ will be set if no irqs pending */
- .endm
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
deleted file mode 100644
index d5a71abcbae..00000000000
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/gpio.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_H
-#define __MACH_U300_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-/* Switch type depending on platform/chip variant */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_COH901335
-#endif
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
-#define U300_COH901571_3
-#endif
-
-/* Get base address for regs here */
-#include "u300-regs.h"
-/* IRQ numbers */
-#include "irqs.h"
-
-/*
- * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
- * used for anything, and often is. The event/enable etc figures are for
- * the lowermost pin (pin 0 on each port), shift this left to match your
- * pin if you're gonna use these values.
- */
-#ifdef U300_COH901335
-#define U300_GPIO_PORTX_SPACING (0x1C)
-/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
-#define U300_GPIO_PXPDIR (0x00)
-#define U300_GPIO_PXPDOR (0x00)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x04)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x08)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x0C)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x10)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x14)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x18)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Control Register 32bit (R/W) */
-#define U300_GPIO_CR (0x54)
-#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
-/* three ports of 8 bits each = GPIO pins 0..23 */
-#define U300_GPIO_NUM_PORTS 3
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-#ifdef U300_COH901571_3
-/*
- * Control Register 32bit (R/W)
- * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
- * gives the number of GPIO pins.
- * bit 8-2 (mask 0x000001FC) contains the core version ID.
- */
-#define U300_GPIO_CR (0x00)
-#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
-#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
-#define U300_GPIO_PORTX_SPACING (0x30)
-/* Port X Pin Data INPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDIR (0x04)
-/* Port X Pin Data OUTPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDOR (0x08)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x0C)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x10)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x14)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x18)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x1C)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x20)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-#ifdef CONFIG_MACH_U300_BS335
-/* seven ports of 8 bits each = GPIO pins 0..55 */
-#define U300_GPIO_NUM_PORTS 7
-#else
-/* five ports of 8 bits each = GPIO pins 0..39 */
-#define U300_GPIO_NUM_PORTS 5
-#endif
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
-#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP 4
-#define U300_GPIO_PIN_CAM_REG_EN 5
-#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
-#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
- defined(CONFIG_MACH_U300_BS335)
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_UART_CTS 2
-#define U300_GPIO_PIN_UART_RTS 3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-
-#ifdef CONFIG_MACH_U300_BS335
-
-#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
-#endif
-
-#endif
-
-/* translates a pin number to a port number */
-#define PIN_TO_PORT(val) (val >> 3)
-
-/* These can be found in arch/arm/mach-u300/gpio.c */
-extern int gpio_is_valid(int number);
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-extern int gpio_register_callback(unsigned gpio,
- int (*func)(void *arg),
- void *);
-extern int gpio_unregister_callback(unsigned gpio);
-extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
-extern void disable_irq_on_gpio_pin(unsigned gpio);
-extern void gpio_pullup(unsigned gpio, int value);
-extern int gpio_get_value(unsigned gpio);
-extern void gpio_set_value(unsigned gpio, int value);
-
-#define gpio_get_value_cansleep gpio_get_value
-#define gpio_set_value_cansleep gpio_set_value
-
-/* wrappers to sleep-enable the previous two functions */
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
- return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
- /*
- * FIXME: This is no 1-1 mapping at all, it points to the
- * whole block of 8 pins.
- */
- return (irq - IRQ_U300_GPIO_PORT0) << 3;
-}
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h
deleted file mode 100644
index b99d4ce0ac2..00000000000
--- a/arch/arm/mach-u300/include/mach/hardware.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-u300/include/mach/hardware.h
- */
-#include <asm/sizes.h>
-#include <mach/u300-regs.h>
diff --git a/arch/arm/mach-u300/include/mach/io.h b/arch/arm/mach-u300/include/mach/io.h
deleted file mode 100644
index 5d6b4c13b3a..00000000000
--- a/arch/arm/mach-u300/include/mach/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/io.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Dummy IO map for being able to use writew()/readw(),
- * writel()/readw() and similar accessor functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#ifndef __MACH_IO_H
-#define __MACH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
deleted file mode 100644
index 09b1b28fa8f..00000000000
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/irqs.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * IRQ channel definitions for the U300 platforms.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#define IRQ_U300_INTCON0_START 0
-#define IRQ_U300_INTCON1_START 32
-/* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT 0
-#define IRQ_U300_IRQ1_EXT 1
-#define IRQ_U300_DMA 2
-#define IRQ_U300_VIDEO_ENC_0 3
-#define IRQ_U300_VIDEO_ENC_1 4
-#define IRQ_U300_AAIF_RX 5
-#define IRQ_U300_AAIF_TX 6
-#define IRQ_U300_AAIF_VGPIO 7
-#define IRQ_U300_AAIF_WAKEUP 8
-#define IRQ_U300_PCM_I2S0_FRAME 9
-#define IRQ_U300_PCM_I2S0_FIFO 10
-#define IRQ_U300_PCM_I2S1_FRAME 11
-#define IRQ_U300_PCM_I2S1_FIFO 12
-#define IRQ_U300_XGAM_GAMCON 13
-#define IRQ_U300_XGAM_CDI 14
-#define IRQ_U300_XGAM_CDICON 15
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-/* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC 16
-#endif
-#define IRQ_U300_XGAM_PDI 17
-#define IRQ_U300_XGAM_PDICON 18
-#define IRQ_U300_XGAM_GAMEACC 19
-#define IRQ_U300_XGAM_MCIDCT 20
-#define IRQ_U300_APEX 21
-#define IRQ_U300_UART0 22
-#define IRQ_U300_SPI 23
-#define IRQ_U300_TIMER_APP_OS 24
-#define IRQ_U300_TIMER_APP_DD 25
-#define IRQ_U300_TIMER_APP_GP1 26
-#define IRQ_U300_TIMER_APP_GP2 27
-#define IRQ_U300_TIMER_OS 28
-#define IRQ_U300_TIMER_MS 29
-#define IRQ_U300_KEYPAD_KEYBF 30
-#define IRQ_U300_KEYPAD_KEYBR 31
-/* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0 32
-#define IRQ_U300_GPIO_PORT1 33
-#define IRQ_U300_GPIO_PORT2 34
-
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
- defined(CONFIG_MACH_U300_BS335)
-/* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG 35
-#define IRQ_U300_EVHIST 36
-#define IRQ_U300_MSPRO 37
-#define IRQ_U300_MMCSD_MCIINTR0 38
-#define IRQ_U300_MMCSD_MCIINTR1 39
-#define IRQ_U300_I2C0 40
-#define IRQ_U300_I2C1 41
-#define IRQ_U300_RTC 42
-#define IRQ_U300_NFIF 43
-#define IRQ_U300_NFIF2 44
-#endif
-
-/* DB3150 and DB3200 have only 45 IRQs */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_NR_IRQS 45
-#endif
-
-/* The DB3350-specific interrupt lines */
-#ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0 45
-#define IRQ_U300_ISP_F1 46
-#define IRQ_U300_ISP_F2 47
-#define IRQ_U300_ISP_F3 48
-#define IRQ_U300_ISP_F4 49
-#define IRQ_U300_GPIO_PORT3 50
-#define IRQ_U300_SYSCON_PLL_LOCK 51
-#define IRQ_U300_UART1 52
-#define IRQ_U300_GPIO_PORT4 53
-#define IRQ_U300_GPIO_PORT5 54
-#define IRQ_U300_GPIO_PORT6 55
-#define U300_NR_IRQS 56
-#endif
-
-/* The DB3210-specific interrupt lines */
-#ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3 35
-#define IRQ_U300_GPIO_PORT4 36
-#define IRQ_U300_WDOG 37
-#define IRQ_U300_EVHIST 38
-#define IRQ_U300_MSPRO 39
-#define IRQ_U300_MMCSD_MCIINTR0 40
-#define IRQ_U300_MMCSD_MCIINTR1 41
-#define IRQ_U300_I2C0 42
-#define IRQ_U300_I2C1 43
-#define IRQ_U300_RTC 44
-#define IRQ_U300_NFIF 45
-#define IRQ_U300_NFIF2 46
-#define IRQ_U300_SYSCON_PLL_LOCK 47
-#define U300_NR_IRQS 48
-#endif
-
-#ifdef CONFIG_AB3550_CORE
-#define IRQ_AB3550_BASE (U300_NR_IRQS)
-#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37)
-
-#define NR_IRQS (IRQ_AB3550_END + 1)
-#else
-#define NR_IRQS U300_NR_IRQS
-#endif
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
deleted file mode 100644
index 888e2e351ee..00000000000
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/memory.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Memory virtual/physical mapping constants.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#ifdef CONFIG_MACH_U300_DUAL_RAM
-
-#define PLAT_PHYS_OFFSET UL(0x48000000)
-#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100)
-
-#else
-
-#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
-#define PLAT_PHYS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
-#else
-#define PLAT_PHYS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
-#endif
-#define BOOT_PARAMS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
-#endif
-
-/*
- * We enable a real big DMA buffer if need be.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
deleted file mode 100644
index 77d9210a82e..00000000000
--- a/arch/arm/mach-u300/include/mach/platform.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/platform.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Basic platform init and mapping functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __ASSEMBLY__
-
-void u300_map_io(void);
-void u300_init_irq(void);
-void u300_init_devices(void);
-extern struct sys_timer u300_timer;
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
deleted file mode 100644
index 7444f5c7da9..00000000000
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ /dev/null
@@ -1,750 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/syscon.h
- *
- *
- * Copyright (C) 2008 ST-Ericsson AB
- *
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#ifndef __MACH_SYSCON_H
-#define __MACH_SYSCON_H
-
-/*
- * All register defines for SYSCON registers that concerns individual
- * block clocks and reset lines are registered here. This is because
- * we don't want any other file to try to fool around with this stuff.
- */
-
-/* APP side SYSCON registers */
-/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
-/* CLK Control Register 16bit (R/W) */
-#define U300_SYSCON_CCR (0x0000)
-#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040)
-#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020)
-#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00)
-/* CLK Status Register 16bit (R/W) */
-#define U300_SYSCON_CSR (0x0004)
-#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002)
-#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001)
-/* Reset lines for SLOW devices 16bit (R/W) */
-#define U300_SYSCON_RSR (0x0014)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200)
-#endif
-#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100)
-#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080)
-#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040)
-#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020)
-#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010)
-#define U300_SYSCON_RSR_EH_RESET_EN (0x0008)
-#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004)
-#define U300_SYSCON_RSR_UART_RESET_EN (0x0002)
-#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001)
-/* Reset lines for FAST devices 16bit (R/W) */
-#define U300_SYSCON_RFR (0x0018)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080)
-#endif
-#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040)
-#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020)
-#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010)
-#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008)
-#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004)
-#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002)
-#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001)
-/* Reset lines for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_RRR (0x001c)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000)
-#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000)
-#endif
-#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000)
-#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800)
-#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100)
-#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080)
-#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040)
-#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020)
-#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010)
-#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008)
-#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004)
-#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002)
-#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001)
-/* Clock enable for SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CESR (0x0020)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200)
-#endif
-#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100)
-#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080)
-#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040)
-#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010)
-#define U300_SYSCON_CESR_EH_CLK_EN (0x0008)
-#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004)
-#define U300_SYSCON_CESR_UART_CLK_EN (0x0002)
-#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001)
-/* Clock enable for FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CEFR (0x0024)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200)
-#endif
-#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100)
-#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080)
-#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040)
-#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020)
-#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010)
-#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008)
-#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004)
-#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002)
-#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001)
-/* Clock enable for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CERR (0x0028)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000)
-#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000)
-#endif
-#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800)
-#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400)
-#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200)
-#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100)
-#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080)
-#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040)
-#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020)
-#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010)
-#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008)
-#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004)
-#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002)
-#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001)
-/* Single block clock enable 16bit (-/W) */
-#define U300_SYSCON_SBCER (0x002c)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009)
-#endif
-#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008)
-#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007)
-#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006)
-#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004)
-#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003)
-#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002)
-#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001)
-#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019)
-#endif
-#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018)
-#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017)
-#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016)
-#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015)
-#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014)
-#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013)
-#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012)
-#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011)
-#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D)
-#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C)
-#endif
-#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B)
-#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A)
-#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029)
-#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028)
-#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027)
-#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026)
-#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025)
-#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024)
-#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023)
-#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022)
-#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021)
-#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020)
-/* Single block clock disable 16bit (-/W) */
-#define U300_SYSCON_SBCDR (0x0030)
-/* Same values as above for SBCER */
-/* Clock force SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CFSR (0x003c)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200)
-#endif
-#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100)
-#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080)
-#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020)
-#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010)
-#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008)
-#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004)
-#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002)
-#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001)
-/* Clock force FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CFFR (0x40)
-/* Values not defined. Define if you want to use them. */
-/* Clock force the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CFRR (0x44)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000)
-#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000)
-#endif
-#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800)
-#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400)
-#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200)
-#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100)
-#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080)
-#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040)
-#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020)
-#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010)
-#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008)
-#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004)
-#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002)
-#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001)
-/* PLL208 Frequency Control 16bit (R/W) */
-#define U300_SYSCON_PFCR (0x48)
-#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F)
-/* Power Management Control 16bit (R/W) */
-#define U300_SYSCON_PMCR (0x50)
-#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002)
-#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001)
-/*
- * All other clocking registers moved to clock.c!
- */
-/* Reset Out 16bit (R/W) */
-#define U300_SYSCON_RCR (0x6c)
-#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001)
-/* EMIF Slew Rate Control 16bit (R/W) */
-#define U300_SYSCON_SRCLR (0x70)
-#define U300_SYSCON_SRCLR_MASK (0x03FF)
-#define U300_SYSCON_SRCLR_VALUE (0x03FF)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001)
-/* EMIF Clock Control Register 16bit (R/W) */
-#define U300_SYSCON_ECCR (0x0078)
-#define U300_SYSCON_ECCR_MASK (0x000F)
-#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008)
-#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004)
-#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002)
-#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001)
-/* PAD MUX Control register 1 (LOW) 16bit (R/W) */
-#define U300_SYSCON_PMC1LR (0x007C)
-#define U300_SYSCON_PMC1LR_MASK (0xFFFF)
-#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000)
-#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000)
-#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_PMC1LR_CDI_CDI2 (0x8000)
-#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO (0xC000)
-#elif CONFIG_MACH_U300_BS365
-#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000)
-#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000)
-#endif
-#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000)
-#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000)
-#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000)
-#define U300_SYSCON_PMC1LR_PDI_WCDMA (0x3000)
-#define U300_SYSCON_PMC1LR_MMCSD_MASK (0x0C00)
-#define U300_SYSCON_PMC1LR_MMCSD_MMCSD (0x0000)
-#define U300_SYSCON_PMC1LR_MMCSD_MSPRO (0x0400)
-#define U300_SYSCON_PMC1LR_MMCSD_DSP (0x0800)
-#define U300_SYSCON_PMC1LR_MMCSD_WCDMA (0x0C00)
-#define U300_SYSCON_PMC1LR_ETM_MASK (0x0300)
-#define U300_SYSCON_PMC1LR_ETM_ACC (0x0000)
-#define U300_SYSCON_PMC1LR_ETM_APP (0x0100)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK (0x00C0)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC (0x0000)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF (0x0040)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM (0x0080)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB (0x00C0)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK (0x0030)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC (0x0000)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF (0x0010)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM (0x0020)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI (0x0030)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK (0x000C)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC (0x0000)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF (0x0004)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM (0x0008)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI (0x000C)
-#define U300_SYSCON_PMC1LR_EMIF_1_MASK (0x0003)
-#define U300_SYSCON_PMC1LR_EMIF_1_STATIC (0x0000)
-#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 (0x0001)
-#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 (0x0002)
-#define U300_SYSCON_PMC1LR_EMIF_1 (0x0003)
-/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
-#define U300_SYSCON_PMC1HR (0x007E)
-#define U300_SYSCON_PMC1HR_MASK (0xFFFF)
-#define U300_SYSCON_PMC1HR_MISC_2_MASK (0xC000)
-#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_MISC_2_MSPRO (0x4000)
-#define U300_SYSCON_PMC1HR_MISC_2_DSP (0x8000)
-#define U300_SYSCON_PMC1HR_MISC_2_AAIF (0xC000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK (0x3000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF (0x1000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP (0x2000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF (0x3000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK (0x0C00)
-#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC (0x0400)
-#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP (0x0800)
-#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF (0x0C00)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK (0x0300)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI (0x0100)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF (0x0300)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK (0x00C0)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI (0x0040)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF (0x00C0)
-#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK (0x0030)
-#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI (0x0010)
-#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP (0x0020)
-#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF (0x0030)
-#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK (0x000C)
-#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 (0x0004)
-#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS (0x0008)
-#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF (0x000C)
-#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK (0x0003)
-#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 (0x0001)
-#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF (0x0003)
-/* Step one for killing the applications system 16bit (-/W) */
-#define U300_SYSCON_KA1R (0x0080)
-#define U300_SYSCON_KA1R_MASK (0xFFFF)
-#define U300_SYSCON_KA1R_VALUE (0xFFFF)
-/* Step two for killing the application system 16bit (-/W) */
-#define U300_SYSCON_KA2R (0x0084)
-#define U300_SYSCON_KA2R_MASK (0xFFFF)
-#define U300_SYSCON_KA2R_VALUE (0xFFFF)
-/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
-#define U300_SYSCON_MMF0R (0x90)
-#define U300_SYSCON_MMF0R_MASK (0x00FF)
-#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0)
-#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F)
-/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
-#define U300_SYSCON_MMF1R (0x94)
-#define U300_SYSCON_MMF1R_MASK (0x00FF)
-#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0)
-#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F)
-/* AAIF control register 16 bit (R/W) */
-#define U300_SYSCON_AAIFCR (0x98)
-#define U300_SYSCON_AAIFCR_MASK (0x0003)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK (0x0003)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL (0x0000)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING (0x0001)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT (0x0002)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT (0x0003)
-/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
-#define U300_SYSCON_MMCR (0x9C)
-#define U300_SYSCON_MMCR_MASK (0x0003)
-#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002)
-#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001)
-/* Pull up/down control (R/W) */
-#define U300_SYSCON_PUCR (0x104)
-#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE (0x0200)
-#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE (0x0100)
-#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080)
-#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040)
-#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F)
-/* Padmux 2 control */
-#define U300_SYSCON_PMC2R (0x100)
-#define U300_SYSCON_PMC2R_APP_MISC_0_MASK (0x00C0)
-#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM (0x0040)
-#define U300_SYSCON_PMC2R_APP_MISC_0_MMC (0x0080)
-#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 (0x00C0)
-#define U300_SYSCON_PMC2R_APP_MISC_1_MASK (0x0300)
-#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM (0x0100)
-#define U300_SYSCON_PMC2R_APP_MISC_1_MMC (0x0200)
-#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 (0x0300)
-#define U300_SYSCON_PMC2R_APP_MISC_2_MASK (0x0C00)
-#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM (0x0400)
-#define U300_SYSCON_PMC2R_APP_MISC_2_MMC (0x0800)
-#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 (0x0C00)
-#define U300_SYSCON_PMC2R_APP_MISC_3_MASK (0x3000)
-#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM (0x1000)
-#define U300_SYSCON_PMC2R_APP_MISC_3_MMC (0x2000)
-#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 (0x3000)
-#define U300_SYSCON_PMC2R_APP_MISC_4_MASK (0xC000)
-#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM (0x4000)
-#define U300_SYSCON_PMC2R_APP_MISC_4_MMC (0x8000)
-#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO (0xC000)
-/* TODO: More SYSCON registers missing */
-#define U300_SYSCON_PMC3R (0x10c)
-#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000)
-#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000)
-#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000)
-#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000)
-/* TODO: Missing other configs */
-#define U300_SYSCON_PMC4R (0x168)
-#define U300_SYSCON_PMC4R_APP_MISC_12_MASK (0x0003)
-#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC4R_APP_MISC_13_MASK (0x000C)
-#define U300_SYSCON_PMC4R_APP_MISC_13_CDI (0x0000)
-#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA (0x0004)
-#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 (0x0008)
-#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO (0x000C)
-#define U300_SYSCON_PMC4R_APP_MISC_14_MASK (0x0030)
-#define U300_SYSCON_PMC4R_APP_MISC_14_CDI (0x0000)
-#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA (0x0010)
-#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 (0x0020)
-#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO (0x0030)
-#define U300_SYSCON_PMC4R_APP_MISC_16_MASK (0x0300)
-#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 (0x0000)
-#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS (0x0100)
-#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N (0x0200)
-/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
-#define U300_SYSCON_S0CCR (0x120)
-#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF)
-#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000)
-#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000)
-#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200)
-#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0)
-#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E)
-#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1)
-/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
-#define U300_SYSCON_S1CCR (0x124)
-#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF)
-#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000)
-#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000)
-#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200)
-#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0)
-#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E)
-#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1)
-/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
-#define U300_SYSCON_S2CCR (0x128)
-#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF)
-#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000)
-#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200)
-#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0)
-#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E)
-#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1)
-/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
-#define U300_SYSCON_MCR (0x12c)
-#define U300_SYSCON_MCR_FIELD_MASK (0x00FF)
-#define U300_SYSCON_MCR_PMGEN_CR_4_MASK (0x00C0)
-#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO (0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_4_SPI (0x0040)
-#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF (0x00C0)
-#define U300_SYSCON_MCR_PMGEN_CR_2_MASK (0x0030)
-#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO (0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC (0x0010)
-#define U300_SYSCON_MCR_PMGEN_CR_2_DSP (0x0020)
-#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF (0x0030)
-#define U300_SYSCON_MCR_PMGEN_CR_0_MASK (0x000C)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1 (0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2 (0x0004)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3 (0x0008)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C)
-#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002)
-#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001)
-/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
-#define U300_SYSCON_PICR (0x0130)
-#define U300_SYSCON_PICR_MASK (0x00FF)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001)
-/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
-#define U300_SYSCON_PISR (0x0134)
-#define U300_SYSCON_PISR_MASK (0x000F)
-#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008)
-#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004)
-#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002)
-#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001)
-/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
-#define U300_SYSCON_PICLR (0x0138)
-#define U300_SYSCON_PICLR_MASK (0x000F)
-#define U300_SYSCON_PICLR_RWMASK (0x0000)
-#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008)
-#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004)
-#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002)
-#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001)
-/* CAMIF_CONTROL 16 bit (-/W) */
-#define U300_SYSCON_CICR (0x013C)
-#define U300_SYSCON_CICR_MASK (0x0FFF)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK (0x0F00)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1 (0x0C00)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0 (0x0300)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK (0x00F0)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1 (0x00C0)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0 (0x0030)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK (0x000F)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1 (0x000C)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0 (0x0003)
-/* Clock activity observability register 0 */
-#define U300_SYSCON_C0OAR (0x140)
-#define U300_SYSCON_C0OAR_MASK (0xFFFF)
-#define U300_SYSCON_C0OAR_VALUE (0xFFFF)
-#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000)
-#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000)
-#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000)
-#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000)
-#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800)
-#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400)
-#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200)
-#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100)
-#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080)
-#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040)
-#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020)
-#define U300_SYSCON_C0OAR_APEX_CLK (0x0010)
-#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008)
-#define U300_SYSCON_C0OAR_AHB_CLK (0x0004)
-#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002)
-#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001)
-/* Clock activity observability register 1 */
-#define U300_SYSCON_C1OAR (0x144)
-#define U300_SYSCON_C1OAR_MASK (0x3FFE)
-#define U300_SYSCON_C1OAR_VALUE (0x3FFE)
-#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000)
-#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000)
-#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800)
-#define U300_SYSCON_C1OAR_MMC_CLK (0x0400)
-#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200)
-#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100)
-#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080)
-#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040)
-#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020)
-#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010)
-#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008)
-#define U300_SYSCON_C1OAR_PPM_CLK (0x0004)
-#define U300_SYSCON_C1OAR_DMA_CLK (0x0002)
-/* Clock activity observability register 2 */
-#define U300_SYSCON_C2OAR (0x148)
-#define U300_SYSCON_C2OAR_MASK (0x0FFF)
-#define U300_SYSCON_C2OAR_VALUE (0x0FFF)
-#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800)
-#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400)
-#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200)
-#define U300_SYSCON_C2OAR_VC_CLK (0x0100)
-#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080)
-#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040)
-#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020)
-#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001)
-
-/* Chip ID register 16bit (R/-) */
-#define U300_SYSCON_CIDR (0x400)
-/* Video IRQ clear 16bit (R/W) */
-#define U300_SYSCON_VICR (0x404)
-#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE (0x0002)
-#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE (0x0001)
-/* SMCR */
-#define U300_SYSCON_SMCR (0x4d0)
-#define U300_SYSCON_SMCR_FIELD_MASK (0x000e)
-#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008)
-#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004)
-#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002)
-/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
-#define U300_SYSCON_CSDR (0x4f0)
-#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001)
-/* PRINT_CONTROL Print Control 16bit (R/-) */
-#define U300_SYSCON_PCR (0x4f8)
-#define U300_SYSCON_PCR_SERV_IND (0x0001)
-/* BOOT_CONTROL 16bit (R/-) */
-#define U300_SYSCON_BCR (0x4fc)
-#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400)
-#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200)
-#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC)
-#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003)
-
-
-/* CPU clock defines */
-/**
- * CPU high frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_HIGH 208
-/**
- * CPU medium frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_MEDIUM 52
-/**
- * CPU low frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_LOW 13
-
-/* EMIF clock defines */
-/**
- * EMIF high frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_HIGH 104
-/**
- * EMIF medium frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_MEDIUM 52
-/**
- * EMIF low frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_LOW 13
-
-/* AHB clock defines */
-/**
- * AHB high frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_HIGH 52
-/**
- * AHB medium frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_MEDIUM 26
-/**
- * AHB low frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_LOW 7 /* i.e 13/2=6.5MHz */
-
-enum syscon_busmaster {
- SYSCON_BM_DMAC,
- SYSCON_BM_XGAM,
- SYSCON_BM_VIDEO_ENC
-};
-
-/* Selectr a resistor or a set of resistors */
-enum syscon_pull_up_down {
- SYSCON_PU_KEY_IN_EN,
- SYSCON_PU_EMIF_1_8_BIT_EN,
- SYSCON_PU_EMIF_1_16_BIT_EN,
- SYSCON_PU_EMIF_1_NFIF_READY_EN,
- SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
-};
-
-/*
- * Note that this array must match the order of the array "clk_reg"
- * in syscon.c
- */
-enum syscon_clk {
- SYSCON_CLKCONTROL_SLOW_BRIDGE,
- SYSCON_CLKCONTROL_UART,
- SYSCON_CLKCONTROL_BTR,
- SYSCON_CLKCONTROL_EH,
- SYSCON_CLKCONTROL_GPIO,
- SYSCON_CLKCONTROL_KEYPAD,
- SYSCON_CLKCONTROL_APP_TIMER,
- SYSCON_CLKCONTROL_ACC_TIMER,
- SYSCON_CLKCONTROL_FAST_BRIDGE,
- SYSCON_CLKCONTROL_I2C0,
- SYSCON_CLKCONTROL_I2C1,
- SYSCON_CLKCONTROL_I2S0,
- SYSCON_CLKCONTROL_I2S1,
- SYSCON_CLKCONTROL_MMC,
- SYSCON_CLKCONTROL_SPI,
- SYSCON_CLKCONTROL_I2S0_CORE,
- SYSCON_CLKCONTROL_I2S1_CORE,
- SYSCON_CLKCONTROL_UART1,
- SYSCON_CLKCONTROL_AAIF,
- SYSCON_CLKCONTROL_AHB,
- SYSCON_CLKCONTROL_APEX,
- SYSCON_CLKCONTROL_CPU,
- SYSCON_CLKCONTROL_DMA,
- SYSCON_CLKCONTROL_EMIF,
- SYSCON_CLKCONTROL_NAND_IF,
- SYSCON_CLKCONTROL_VIDEO_ENC,
- SYSCON_CLKCONTROL_XGAM,
- SYSCON_CLKCONTROL_SEMI,
- SYSCON_CLKCONTROL_AHB_SUBSYS,
- SYSCON_CLKCONTROL_MSPRO
-};
-
-enum syscon_sysclk_mode {
- SYSCON_SYSCLK_DISABLED,
- SYSCON_SYSCLK_M_CLK,
- SYSCON_SYSCLK_ACC_FSM,
- SYSCON_SYSCLK_PLL60_48,
- SYSCON_SYSCLK_PLL60_60,
- SYSCON_SYSCLK_ACC_PLL208,
- SYSCON_SYSCLK_APP_PLL13,
- SYSCON_SYSCLK_APP_FSM,
- SYSCON_SYSCLK_RTC,
- SYSCON_SYSCLK_APP_PLL208
-};
-
-enum syscon_sysclk_req {
- SYSCON_SYSCLKREQ_DISABLED,
- SYSCON_SYSCLKREQ_ACTIVE_LOW,
- SYSCON_SYSCLKREQ_MONITOR
-};
-
-enum syscon_clk_mode {
- SYSCON_CLKMODE_OFF,
- SYSCON_CLKMODE_DEFAULT,
- SYSCON_CLKMODE_LOW,
- SYSCON_CLKMODE_MEDIUM,
- SYSCON_CLKMODE_HIGH,
- SYSCON_CLKMODE_PERMANENT,
- SYSCON_CLKMODE_ON,
-};
-
-enum syscon_call_mode {
- SYSCON_CLKCALL_NOWAIT,
- SYSCON_CLKCALL_WAIT,
-};
-
-int syscon_dc_on(bool keep_power_on);
-int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
- bool active);
-bool syscon_get_busmaster_active_state(void);
-int syscon_set_sleep_mask(enum syscon_clk,
- bool sleep_ctrl);
-int syscon_config_sysclk(u32 sysclk,
- enum syscon_sysclk_mode sysclkmode,
- bool inverse,
- u32 divisor,
- enum syscon_sysclk_req sysclkreq);
-bool syscon_can_turn_off_semi_clock(void);
-
-/* This function is restricted to core.c */
-int syscon_request_normal_power(bool req);
-
-/* This function is restricted to be used by platform_speed.c */
-int syscon_speed_request(enum syscon_call_mode wait_mode,
- enum syscon_clk_mode req_clk_mode);
-#endif /* __MACH_SYSCON_H */
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
deleted file mode 100644
index 8daf13634ce..00000000000
--- a/arch/arm/mach-u300/include/mach/system.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/system.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * System shutdown and reset functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <asm/hardware/vic.h>
-#include <asm/irq.h>
-
-/* Forward declare this function from the watchdog */
-void coh901327_watchdog_reset(void);
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static void arch_reset(char mode, const char *cmd)
-{
- switch (mode) {
- case 's':
- case 'h':
- printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
- /* Disable interrupts */
- local_irq_disable();
-#ifdef CONFIG_COH901327_WATCHDOG
- coh901327_watchdog_reset();
-#endif
- break;
- default:
- /* Do nothing */
- break;
- }
- /* Wait for system do die/reset. */
- while (1);
-}
diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h
deleted file mode 100644
index f233b72633f..00000000000
--- a/arch/arm/mach-u300/include/mach/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/timex.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Platform tick rate definition.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-/* This is for the APP OS GP1 (General Purpose 1) timer */
-#define CLOCK_TICK_RATE 1000000
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
deleted file mode 100644
index 8b85df4c8d8..00000000000
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/u300-regs.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Basic register address definitions in physical memory and
- * some block definitions for core devices like the timer.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_REGS_H
-#define __MACH_U300_REGS_H
-
-/*
- * These are the large blocks of memory allocated for I/O.
- * the defines are used for setting up the I/O memory mapping.
- */
-
-/* NAND Flash CS0 */
-#define U300_NAND_CS0_PHYS_BASE 0x80000000
-
-/* NFIF */
-#define U300_NAND_IF_PHYS_BASE 0x9f800000
-
-/* AHB Peripherals */
-#define U300_AHB_PER_PHYS_BASE 0xa0000000
-#define U300_AHB_PER_VIRT_BASE 0xff010000
-
-/* FAST Peripherals */
-#define U300_FAST_PER_PHYS_BASE 0xc0000000
-#define U300_FAST_PER_VIRT_BASE 0xff020000
-
-/* SLOW Peripherals */
-#define U300_SLOW_PER_PHYS_BASE 0xc0010000
-#define U300_SLOW_PER_VIRT_BASE 0xff000000
-
-/* Boot ROM */
-#define U300_BOOTROM_PHYS_BASE 0xffff0000
-#define U300_BOOTROM_VIRT_BASE 0xffff0000
-
-/* SEMI config base */
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SEMI_CONFIG_BASE 0x2FFE0000
-#else
-#define U300_SEMI_CONFIG_BASE 0x30000000
-#endif
-
-/*
- * All the following peripherals are specified at their PHYSICAL address,
- * so if you need to access them (in the kernel), you MUST use the macros
- * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
- * etc.
- */
-
-/*
- * AHB peripherals
- */
-
-/* AHB Peripherals Bridge Controller */
-#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000)
-
-/* Vectored Interrupt Controller 0, servicing 32 interrupts */
-#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000)
-
-/* Vectored Interrupt Controller 1, servicing 32 interrupts */
-#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000)
-
-/* Memory Stick Pro (MSPRO) controller */
-#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
-
-/* EMIF Configuration Area */
-#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000)
-
-
-/*
- * FAST peripherals
- */
-
-/* FAST bridge control */
-#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000)
-
-/* MMC/SD controller */
-#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000)
-
-/* PCM I2S0 controller */
-#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000)
-
-/* PCM I2S1 controller */
-#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000)
-
-/* I2C0 controller */
-#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000)
-
-/* I2C1 controller */
-#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000)
-
-/* SPI controller */
-#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000)
-
-#ifdef CONFIG_MACH_U300_BS335
-/* Fast UART1 on U335 only */
-#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
-#endif
-
-/*
- * SLOW peripherals
- */
-
-/* SLOW bridge control */
-#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE)
-
-/* SYSCON */
-#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000)
-
-/* Watchdog */
-#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
-
-/* UART0 */
-#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000)
-
-/* APP side special timer */
-#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000)
-
-/* Keypad */
-#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
-
-/* GPIO */
-#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000)
-
-/* RTC */
-#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
-
-/* Bus tracer */
-#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000)
-
-/* Event handler (hardware queue) */
-#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000)
-
-/* Genric Timer */
-#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000)
-
-/* PPM */
-#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000)
-
-
-/*
- * REST peripherals
- */
-
-/* ISP (image signal processor) is only available in U335 */
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_ISP_BASE (0xA0008000)
-#endif
-
-/* DMA Controller base */
-#define U300_DMAC_BASE (0xC0020000)
-
-/* MSL Base */
-#define U300_MSL_BASE (0xc0022000)
-
-/* APEX Base */
-#define U300_APEX_BASE (0xc0030000)
-
-/* Video Encoder Base */
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_VIDEOENC_BASE (0xc0080000)
-#else
-#define U300_VIDEOENC_BASE (0xc0040000)
-#endif
-
-/* XGAM Base */
-#define U300_XGAM_BASE (0xd0000000)
-
-/*
- * Virtual accessor macros for static devices
- */
-
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/uncompress.h b/arch/arm/mach-u300/include/mach/uncompress.h
deleted file mode 100644
index 29acb718acf..00000000000
--- a/arch/arm/mach-u300/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-u300/include/mach/uncompress.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define AMBA_UART_DR (*(volatile unsigned char *)0xc0013000)
-#define AMBA_UART_LCRH (*(volatile unsigned char *)0xc001302C)
-#define AMBA_UART_CR (*(volatile unsigned char *)0xc0013030)
-#define AMBA_UART_FR (*(volatile unsigned char *)0xc0013018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- while (AMBA_UART_FR & (1 << 5))
- barrier();
-
- AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
- while (AMBA_UART_FR & (1 << 3))
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
deleted file mode 100644
index ec423b92b81..00000000000
--- a/arch/arm/mach-u300/include/mach/vmalloc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/vmalloc.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Virtual memory allocations
- * End must be above the I/O registers and on an even 2MiB boundary.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#define VMALLOC_END 0xfe800000UL
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-14 01:39:37 +0000