1 files changed, 0 insertions, 100 deletions
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
deleted file mode 100644
index 2827faa4742..00000000000
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_H_
-#define _INCLUDE_H3600_H_
-
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
-#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
-
-/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT	0xf0000000
-#define H3600_BANK_2_VIRT	0xf1000000
-#define H3600_BANK_4_VIRT	0xf3800000
-
-/*
-   Machine-independent GPIO definitions
-   --- these are common across all current iPAQ platforms
-*/
-
-#define GPIO_H3600_NPOWER_BUTTON	GPIO_GPIO (0)	/* Also known as the "off button"  */
-
-#define GPIO_H3600_PCMCIA_CD1		GPIO_GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ1		GPIO_GPIO (11)
-
-/* UDA1341 L3 Interface */
-#define GPIO_H3600_L3_DATA		GPIO_GPIO (14)
-#define GPIO_H3600_L3_MODE		GPIO_GPIO (15)
-#define GPIO_H3600_L3_CLOCK		GPIO_GPIO (16)
-
-#define GPIO_H3600_PCMCIA_CD0		GPIO_GPIO (17)
-#define GPIO_H3600_SYS_CLK		GPIO_GPIO (19)
-#define GPIO_H3600_PCMCIA_IRQ0		GPIO_GPIO (21)
-
-#define GPIO_H3600_COM_DCD		GPIO_GPIO (23)
-#define GPIO_H3600_OPT_IRQ		GPIO_GPIO (24)
-#define GPIO_H3600_COM_CTS		GPIO_GPIO (25)
-#define GPIO_H3600_COM_RTS		GPIO_GPIO (26)
-
-#define IRQ_GPIO_H3600_NPOWER_BUTTON	IRQ_GPIO0
-#define IRQ_GPIO_H3600_PCMCIA_CD1	IRQ_GPIO10
-#define IRQ_GPIO_H3600_PCMCIA_IRQ1	IRQ_GPIO11
-#define IRQ_GPIO_H3600_PCMCIA_CD0	IRQ_GPIO17
-#define IRQ_GPIO_H3600_PCMCIA_IRQ0	IRQ_GPIO21
-#define IRQ_GPIO_H3600_COM_DCD		IRQ_GPIO23
-#define IRQ_GPIO_H3600_OPT_IRQ		IRQ_GPIO24
-#define IRQ_GPIO_H3600_COM_CTS		IRQ_GPIO25
-
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
-	IPAQ_EGPIO_LCD_POWER,	  /* Power to the LCD panel */
-	IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
-	IPAQ_EGPIO_AUDIO_ON,	  /* Audio power */
-	IPAQ_EGPIO_QMUTE,	  /* Audio muting */
-	IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
-	IPAQ_EGPIO_OPT_ON,	  /* Power to extension sleeves */
-	IPAQ_EGPIO_CARD_RESET,	  /* Reset PCMCIA cards on extension sleeve (???) */
-	IPAQ_EGPIO_OPT_RESET,	  /* Reset option pack (???) */
-	IPAQ_EGPIO_IR_ON,	  /* IR sensor/emitter power */
-	IPAQ_EGPIO_IR_FSEL,	  /* IR speed selection 1->fast, 0->slow */
-	IPAQ_EGPIO_RS232_ON,	  /* Maxim RS232 chip power */
-	IPAQ_EGPIO_VPP_ON,	  /* Turn on power to flash programming */
-	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
-};
-
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-
-#endif /* ASSEMBLY */
-
-#endif /* _INCLUDE_H3600_H_ */