diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx')
30 files changed, 267 insertions, 668 deletions
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index f057b6ae4f9..5552e048c2b 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -288,5 +288,6 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_RTC select S3C64XX_DEV_SPI select S3C24XX_GPIO_EXTRA128 + select I2C help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 61b4034a0c2..cfc0b994180 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -13,7 +13,6 @@ obj- := # Core files obj-y += cpu.o obj-y += clock.o -obj-y += gpiolib.o # Core support for S3C6400 system @@ -55,12 +54,10 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o -obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o +obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o # device support obj-y += dev-uart.o obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o -obj-$(CONFIG_S3C64XX_DEV_TS) += dev-ts.o -obj-$(CONFIG_S3C64XX_DEV_ONENAND1) += dev-onenand1.o diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 8cf39e33579..39c238d7a3d 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -25,13 +25,13 @@ #include <mach/regs-sys.h> #include <mach/regs-clock.h> -#include <mach/pll.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/cpu-freq.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> +#include <plat/pll.h> /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call * ext_xtal_mux for want of an actual name from the manual. @@ -735,7 +735,8 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) /* For now assume the mux always selects the crystal */ clk_ext_xtal_mux.parent = xtal_clk; - epll = s3c6400_get_epll(xtal); + epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0), + __raw_readl(S3C_EPLL_CON1)); mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); @@ -744,7 +745,13 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", apll, mpll, epll); - hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL) + /* Synchronous mode */ + hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + else + /* Asynchronous mode */ + hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c index c7047838e11..de085b798aa 100644 --- a/arch/arm/mach-s3c64xx/cpu.c +++ b/arch/arm/mach-s3c64xx/cpu.c @@ -34,8 +34,8 @@ #include <plat/devs.h> #include <plat/clock.h> -#include <mach/s3c6400.h> -#include <mach/s3c6410.h> +#include <plat/s3c6400.h> +#include <plat/s3c6410.h> /* table of supported CPUs */ diff --git a/arch/arm/mach-s3c64xx/dev-onenand1.c b/arch/arm/mach-s3c64xx/dev-onenand1.c deleted file mode 100644 index 999f9e17a1e..00000000000 --- a/arch/arm/mach-s3c64xx/dev-onenand1.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/arch/arm/mach-s3c64xx/dev-onenand1.c - * - * Copyright (c) 2008-2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * S3C64XX series device definition for OneNAND devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/onenand.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/devs.h> - -static struct resource s3c64xx_onenand1_resources[] = { - [0] = { - .start = S3C64XX_PA_ONENAND1, - .end = S3C64XX_PA_ONENAND1 + 0x400 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C64XX_PA_ONENAND1_BUF, - .end = S3C64XX_PA_ONENAND1_BUF + S3C64XX_SZ_ONENAND1_BUF - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_ONENAND1, - .end = IRQ_ONENAND1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c64xx_device_onenand1 = { - .name = "samsung-onenand", - .id = 1, - .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources), - .resource = s3c64xx_onenand1_resources, -}; - -void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata) -{ - s3c_set_platdata(pdata, sizeof(struct onenand_platform_data), - &s3c64xx_device_onenand1); -} diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 67c97fab62f..17d62f4f820 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void) } /* Set all DMA configuration to be DMA, not SDMA */ - writel(0xffffff, S3C_SYSREG(0x110)); + writel(0xffffff, S3C64XX_SDMA_SEL); /* Register standard DMA controllers */ s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000); diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c deleted file mode 100644 index 92b09085caa..00000000000 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ /dev/null @@ -1,290 +0,0 @@ -/* arch/arm/plat-s3c64xx/gpiolib.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> -#include <mach/regs-gpio.h> - -/* GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 8 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * D 5 4Bit Yes 3 - * E 5 4Bit Yes None - * F 16 2Bit Yes 4 [1] - * G 7 4Bit Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * K 16 4Bit[2] No None - * L 15 4Bit[2] No None - * M 6 4Bit No IRQ_EINT - * N 16 2Bit No IRQ_EINT - * O 16 2Bit Yes 7 - * P 15 2Bit Yes 8 - * Q 9 2Bit Yes 9 - * - * [1] BANKF pins 14,15 do not form part of the external interrupt sources - * [2] BANK has two control registers, GPxCON0 and GPxCON1 - */ - -static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { - .cfg_eint = 7, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { - .cfg_eint = 3, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin) -{ - return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; -} - -static struct s3c_gpio_chip gpio_4bit[] = { - { - .base = S3C64XX_GPA_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPA(0), - .ngpio = S3C64XX_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S3C64XX_GPB_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPB(0), - .ngpio = S3C64XX_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S3C64XX_GPC_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPC(0), - .ngpio = S3C64XX_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S3C64XX_GPD_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPD(0), - .ngpio = S3C64XX_GPIO_D_NR, - .label = "GPD", - }, - }, { - .base = S3C64XX_GPE_BASE, - .config = &gpio_4bit_cfg_noint, - .chip = { - .base = S3C64XX_GPE(0), - .ngpio = S3C64XX_GPIO_E_NR, - .label = "GPE", - }, - }, { - .base = S3C64XX_GPG_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPG(0), - .ngpio = S3C64XX_GPIO_G_NR, - .label = "GPG", - }, - }, { - .base = S3C64XX_GPM_BASE, - .config = &gpio_4bit_cfg_eint0011, - .chip = { - .base = S3C64XX_GPM(0), - .ngpio = S3C64XX_GPIO_M_NR, - .label = "GPM", - .to_irq = s3c64xx_gpio2int_gpm, - }, - }, -}; - -static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin) -{ - return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; -} - -static struct s3c_gpio_chip gpio_4bit2[] = { - { - .base = S3C64XX_GPH_BASE + 0x4, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPH(0), - .ngpio = S3C64XX_GPIO_H_NR, - .label = "GPH", - }, - }, { - .base = S3C64XX_GPK_BASE + 0x4, - .config = &gpio_4bit_cfg_noint, - .chip = { - .base = S3C64XX_GPK(0), - .ngpio = S3C64XX_GPIO_K_NR, - .label = "GPK", - }, - }, { - .base = S3C64XX_GPL_BASE + 0x4, - .config = &gpio_4bit_cfg_eint0011, - .chip = { - .base = S3C64XX_GPL(0), - .ngpio = S3C64XX_GPIO_L_NR, - .label = "GPL", - .to_irq = s3c64xx_gpio2int_gpl, - }, - }, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { - .cfg_eint = 2, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { - .cfg_eint = 3, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_chip gpio_2bit[] = { - { - .base = S3C64XX_GPF_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPF(0), - .ngpio = S3C64XX_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S3C64XX_GPI_BASE, - .config = &gpio_2bit_cfg_noint, - .chip = { - .base = S3C64XX_GPI(0), - .ngpio = S3C64XX_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S3C64XX_GPJ_BASE, - .config = &gpio_2bit_cfg_noint, - .chip = { - .base = S3C64XX_GPJ(0), - .ngpio = S3C64XX_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S3C64XX_GPN_BASE, - .irq_base = IRQ_EINT(0), - .config = &gpio_2bit_cfg_eint10, - .chip = { - .base = S3C64XX_GPN(0), - .ngpio = S3C64XX_GPIO_N_NR, - .label = "GPN", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = S3C64XX_GPO_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPO(0), - .ngpio = S3C64XX_GPIO_O_NR, - .label = "GPO", - }, - }, { - .base = S3C64XX_GPP_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPP(0), - .ngpio = S3C64XX_GPIO_P_NR, - .label = "GPP", - }, - }, { - .base = S3C64XX_GPQ_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPQ(0), - .ngpio = S3C64XX_GPIO_Q_NR, - .label = "GPQ", - }, - }, -}; - -static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) -{ - chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); -} - -static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, - int nr_chips, - void (*fn)(struct s3c_gpio_chip *)) -{ - for (; nr_chips > 0; nr_chips--, chips++) { - if (fn) - (fn)(chips); - s3c_gpiolib_add(chips); - } -} - -static __init int s3c64xx_gpiolib_init(void) -{ - s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit), - samsung_gpiolib_add_4bit); - - s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), - samsung_gpiolib_add_4bit2); - - s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), - s3c64xx_gpiolib_add_2bit); - - return 0; -} - -core_initcall(s3c64xx_gpiolib_init); diff --git a/arch/arm/mach-s3c64xx/include/mach/clkdev.h b/arch/arm/mach-s3c64xx/include/mach/clkdev.h deleted file mode 100644 index 7dffa83d23f..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h new file mode 100644 index 00000000000..be9074e17df --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -0,0 +1,23 @@ +/* Cragganmore 6410 shared definitions + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MACH_CRAG6410_H +#define MACH_CRAG6410_H + +#include <linux/gpio.h> + +#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START +#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) + +#define PCA935X_GPIO_BASE GPIO_BOARD_START +#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) +#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) + +#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h deleted file mode 100644 index 5ef0bb698ee..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/pll.h +++ /dev/null @@ -1,45 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/pll.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX PLL code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C6400_PLL_MDIV_MASK ((1 << (25-16+1)) - 1) -#define S3C6400_PLL_PDIV_MASK ((1 << (13-8+1)) - 1) -#define S3C6400_PLL_SDIV_MASK ((1 << (2-0+1)) - 1) -#define S3C6400_PLL_MDIV_SHIFT (16) -#define S3C6400_PLL_PDIV_SHIFT (8) -#define S3C6400_PLL_SDIV_SHIFT (0) - -#include <asm/div64.h> -#include <plat/pll6553x.h> - -static inline unsigned long s3c6400_get_pll(unsigned long baseclk, - u32 pllcon) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; - pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; - sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -static inline unsigned long s3c6400_get_epll(unsigned long baseclk) -{ - return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0), - __raw_readl(S3C_EPLL_CON1)); -} diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index 38659bebe4b..fcf3dcabb69 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -104,7 +104,7 @@ static inline void s3c_pm_restored_gpios(void) __raw_writel(0, S3C64XX_SLPEN); } -static inline void s3c_pm_saved_gpios(void) +static inline void samsung_pm_saved_gpios(void) { /* turn on the sleep mode and keep it there, as it seems that during * suspend the xCON registers get re-set and thus you can end up with diff --git a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h deleted file mode 100644 index b25bedee0d5..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h +++ /dev/null @@ -1,56 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64xx - pwm clock and timer support - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg >= S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h index 69b78d9f83b..b91e0209328 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h @@ -21,8 +21,11 @@ #define S3C64XX_AHB_CON1 S3C_SYSREG(0x104) #define S3C64XX_AHB_CON2 S3C_SYSREG(0x108) +#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110) + #define S3C64XX_OTHERS S3C_SYSREG(0x900) #define S3C64XX_OTHERS_USBMASK (1 << 16) +#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6) #endif /* _PLAT_REGS_SYS_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h deleted file mode 100644 index f86958d0535..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Header file for s3c6400 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S3C6400 related SoCs */ - -extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c6400_setup_clocks(void); - -extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit); - -#ifdef CONFIG_CPU_S3C6400 - -extern int s3c6400_init(void); -extern void s3c6400_init_irq(void); -extern void s3c6400_map_io(void); -extern void s3c6400_init_clocks(int xtal); - -#define s3c6400_init_uarts s3c6400_common_init_uarts - -#else -#define s3c6400_init_clocks NULL -#define s3c6400_init_uarts NULL -#define s3c6400_map_io NULL -#define s3c6400_init NULL -#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h deleted file mode 100644 index 24f1141ffcb..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h +++ /dev/null @@ -1,29 +0,0 @@ -/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Header file for s3c6410 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C6410 - -extern int s3c6410_init(void); -extern void s3c6410_init_irq(void); -extern void s3c6410_map_io(void); -extern void s3c6410_init_clocks(int xtal); - -#define s3c6410_init_uarts s3c6400_common_init_uarts - -#else -#define s3c6410_init_clocks NULL -#define s3c6410_init_uarts NULL -#define s3c6410_map_io NULL -#define s3c6410_init NULL -#endif diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index d164a282bfb..8eba88e7209 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -45,7 +45,7 @@ #include <plat/fb.h> #include <plat/regs-fb-v4.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c new file mode 100644 index 00000000000..66668565ee7 --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -0,0 +1,182 @@ +/* Speyside modules for Cragganmore - board data probing + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> + +#include <linux/mfd/wm831x/irq.h> +#include <linux/mfd/wm831x/gpio.h> + +#include <sound/wm8996.h> +#include <sound/wm8962.h> +#include <sound/wm9081.h> + +#include <mach/crag6410.h> + +static struct wm8996_retune_mobile_config wm8996_retune[] = { + { + .name = "Sub LPF", + .rate = 48000, + .regs = { + 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, + { + .name = "Sub HPF", + .rate = 48000, + .regs = { + 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, +}; + +static struct wm8996_pdata wm8996_pdata __initdata = { + .ldo_ena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .micdet_def = 1, + .inl_mode = WM8996_DIFFERRENTIAL_1, + .inr_mode = WM8996_DIFFERRENTIAL_1, + + .irq_flags = IRQF_TRIGGER_RISING, + + .gpio_default = { + 0x8001, /* GPIO1 == ADCLRCLK1 */ + 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ + 0x0141, /* GPIO3 == HP_SEL */ + 0x0002, /* GPIO4 == IRQ */ + 0x020e, /* GPIO5 == CLKOUT */ + }, + + .retune_mobile_cfgs = wm8996_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), +}; + +static struct wm8962_pdata wm8962_pdata __initdata = { + .gpio_init = { + 0, + WM8962_GPIO_FN_OPCLK, + WM8962_GPIO_FN_DMICCLK, + 0, + 0x8000 | WM8962_GPIO_FN_DMICDAT, + WM8962_GPIO_FN_IRQ, /* Open drain mode */ + }, + .irq_active_low = true, +}; + +static struct wm9081_pdata wm9081_pdata __initdata = { + .irq_high = false, + .irq_cmos = false, +}; + +static const struct i2c_board_info wm1254_devs[] = { + { I2C_BOARD_INFO("wm8996", 0x1a), + .platform_data = &wm8996_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, +}; + +static const struct i2c_board_info wm1255_devs[] = { + { I2C_BOARD_INFO("wm5100", 0x1a), + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, +}; + +static const struct i2c_board_info wm1259_devs[] = { + { I2C_BOARD_INFO("wm8962", 0x1a), + .platform_data = &wm8962_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, +}; + + +static __devinitdata const struct { + u8 id; + const char *name; + const struct i2c_board_info *i2c_devs; + int num_i2c_devs; +} gf_mods[] = { + { .id = 0x01, .name = "1250-EV1 Springbank" }, + { .id = 0x02, .name = "1251-EV1 Jura" }, + { .id = 0x03, .name = "1252-EV1 Glenlivet" }, + { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x21, .name = "1275-EV1 Mortlach" }, + { .id = 0x25, .name = "1274-EV1 Glencadam" }, + { .id = 0x31, .name = "1253-EV1 Tomatin", }, + { .id = 0x39, .name = "1254-EV1 Dallas Dhu", + .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, + { .id = 0x3a, .name = "1259-EV1 Tobermory", + .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) }, + { .id = 0x3b, .name = "1255-EV1 Kilchoman", + .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, + { .id = 0x3c, .name = "1273-EV1 Longmorn" }, +}; + +static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, + const struct i2c_device_id *i2c_id) +{ + int ret, i, j, id, rev; + + ret = i2c_smbus_read_byte_data(i2c, 0); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to read ID: %d\n", ret); + return ret; + } + |