diff options
Diffstat (limited to 'arch/arm/mach-s3c2410')
66 files changed, 1102 insertions, 10612 deletions
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index eb4ec411312..d4b013b283c 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -1,54 +1,51 @@ -if ARCH_S3C2410 +# arch/arm/mach-s3c2410/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 -menu "S3C24XX Implementations" +config CPU_S3C2410 + bool + depends on ARCH_S3C2410 + select S3C2410_CLOCK + select S3C2410_GPIO + select S3C2410_PM if PM + help + Support for S3C2410 and S3C2410A family from the S3C24XX line + of Samsung Mobile CPUs. -config MACH_AML_M5900 - bool "AML M5900 Series" - select CPU_S3C2410 - select PM_SIMTEC if PM +config CPU_S3C2410_DMA + bool + depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) + default y if CPU_S3C2410 || CPU_S3C2442 help - Say Y here if you are using the American Microsystems M5900 Series - <http://www.amltd.com> + DMA device selection for S3C2410 and compatible CPUs -config MACH_ANUBIS - bool "Simtec Electronics ANUBIS" - select CPU_S3C2440 - select PM_SIMTEC if PM +config S3C2410_PM + bool help - Say Y here if you are using the Simtec Electronics ANUBIS - development system + Power Management code common to S3C2410 and better -config MACH_OSIRIS - bool "Simtec IM2440D20 (OSIRIS) module" - select CPU_S3C2440 - select PM_SIMTEC if PM +config S3C2410_GPIO + bool help - Say Y here if you are using the Simtec IM2440D20 module, also - known as the Osiris. + GPIO code for S3C2410 and similar processors -config ARCH_BAST - bool "Simtec Electronics BAST (EB2410ITX)" - select CPU_S3C2410 - select PM_SIMTEC if PM - select ISA +config S3C2410_CLOCK + bool help - Say Y here if you are using the Simtec Electronics EB2410ITX - development board (also known as BAST) + Clock code for the S3C2410, and similar processors - Product page: <http://www.simtec.co.uk/products/EB2410ITX/>. -config BAST_PC104_IRQ - bool "BAST PC104 IRQ support" - depends on ARCH_BAST - default y - help - Say Y here to enable the PC104 IRQ routing on the - Simtec BAST (EB2410ITX) +menu "S3C2410 Machines" -config PM_H1940 - bool +config ARCH_SMDK2410 + bool "SMDK2410/A9M2410" + select CPU_S3C2410 + select MACH_SMDK help - Internal node for H1940 and related PM + Say Y here if you are using the SMDK2410 or the derived module A9M2410 + <http://www.fsforth.de> config ARCH_H1940 bool "IPAQ H1940" @@ -57,7 +54,10 @@ config ARCH_H1940 help Say Y here if you are using the HP IPAQ H1940 - <http://www.handhelds.org/projects/h1940.html>. +config PM_H1940 + bool + help + Internal node for H1940 and related PM config MACH_N30 bool "Acer N30" @@ -65,53 +65,36 @@ config MACH_N30 help Say Y here if you are using the Acer N30 - <http://zoo.weinigel.se/n30>. - -config MACH_SMDK - bool - help - Common machine code for SMDK2410 and SMDK2440 - -config ARCH_SMDK2410 - bool "SMDK2410/A9M2410" +config ARCH_BAST + bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 - select MACH_SMDK + select PM_SIMTEC if PM + select ISA help - Say Y here if you are using the SMDK2410 or the derived module A9M2410 - <http://www.fsforth.de> + Say Y here if you are using the Simtec Electronics EB2410ITX + development board (also known as BAST) -config ARCH_S3C2440 - bool "SMDK2440" - select CPU_S3C2440 - select MACH_SMDK +config MACH_OTOM + bool "NexVision OTOM Board" + select CPU_S3C2410 help - Say Y here if you are using the SMDK2440. - -config SMDK2440_CPU2440 - bool "SMDK2440 with S3C2440 CPU module" - depends on ARCH_S3C2440 - default y if ARCH_S3C2440 - select CPU_S3C2440 - -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - depends on ARCH_S3C2440 - select CPU_S3C2442 + Say Y here if you are using the Nex Vision OTOM board -config MACH_S3C2413 - bool +config MACH_AML_M5900 + bool "AML M5900 Series" + select CPU_S3C2410 + select PM_SIMTEC if PM help - Internal node for S3C2413 version of SMDK2413, so that - machine_is_s3c2413() will work when MACH_SMDK2413 is - selected + Say Y here if you are using the American Microsystems M5900 Series + <http://www.amltd.com> -config MACH_SMDK2413 - bool "SMDK2413" - select CPU_S3C2412 - select MACH_S3C2413 - select MACH_SMDK +config BAST_PC104_IRQ + bool "BAST PC104 IRQ support" + depends on ARCH_BAST + default y help - Say Y here if you are using an SMDK2413 + Say Y here to enable the PC104 IRQ routing on the + Simtec BAST (EB2410ITX) config MACH_VR1000 bool "Thorcom VR1000" @@ -120,202 +103,11 @@ config MACH_VR1000 help Say Y here if you are using the Thorcom VR1000 board. - This linux port is currently being maintained by Simtec, on behalf - of Thorcom. Any queries, please contact Thorcom first. - -config MACH_RX3715 - bool "HP iPAQ rx3715" - select CPU_S3C2440 - select PM_H1940 if PM - help - Say Y here if you are using the HP iPAQ rx3715. - - See <http://www.handhelds.org/projects/rx3715.html> for more - information on this project - -config MACH_OTOM - bool "NexVision OTOM Board" - select CPU_S3C2410 - help - Say Y here if you are using the Nex Vision OTOM board - -config MACH_NEXCODER_2440 - bool "NexVision NEXCODER 2440 Light Board" - select CPU_S3C2440 - help - Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board - -config MACH_VSTMS - bool "VMSTMS" - select CPU_S3C2412 +config MACH_QT2410 + bool "QT2410" + select CPU_S3C2410 help - Say Y here if you are using an VSTMS board + Say Y here if you are using the Armzone QT2410 endmenu -config S3C2410_CLOCK - bool - help - Clock code for the S3C2410, and similar processors - -config S3C2410_PM - bool - help - Power Management code common to S3C2410 and better - -config CPU_S3C2410_DMA - bool - depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) - default y if CPU_S3C2410 || CPU_S3C2442 - help - DMA device selection for S3C2410 and compatible CPUs - -config CPU_S3C2410 - bool - depends on ARCH_S3C2410 - select S3C2410_CLOCK - select S3C2410_PM if PM - help - Support for S3C2410 and S3C2410A family from the S3C24XX line - of Samsung Mobile CPUs. - -# internal node to signify if we are only dealing with an S3C2412 - -config CPU_S3C2412_ONLY - bool - depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ - !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412 - default y if CPU_S3C2412 - -config S3C2412_PM - bool - help - Internal config node to apply S3C2412 power management - -config CPU_S3C2412 - bool - depends on ARCH_S3C2410 - select S3C2412_PM if PM - help - Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line - -config CPU_S3C244X - bool - depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442) - help - Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. - -config CPU_S3C2440 - bool - depends on ARCH_S3C2410 - select S3C2410_CLOCK - select S3C2410_PM if PM - select CPU_S3C244X - help - Support for S3C2440 Samsung Mobile CPU based systems. - -config CPU_S3C2442 - bool - depends on ARCH_S3C2420 - select S3C2410_CLOCK - select S3C2410_PM if PM - select CPU_S3C244X - help - Support for S3C2442 Samsung Mobile CPU based systems. - -comment "S3C2410 Boot" - -config S3C2410_BOOT_WATCHDOG - bool "S3C2410 Initialisation watchdog" - depends on ARCH_S3C2410 && S3C2410_WATCHDOG - help - Say y to enable the watchdog during the kernel decompression - stage. If the kernel fails to uncompress, then the watchdog - will trigger a reset and the system should restart. - - Although this uses the same hardware unit as the kernel watchdog - driver, it is not a replacement for it. If you use this option, - you will have to use the watchdg driver to either stop the timeout - or restart it. If you do not, then your kernel will reboot after - startup. - - The driver uses a fixed timeout value, so the exact time till the - system resets depends on the value of PCLK. The timeout on an - 200MHz s3c2410 should be about 30 seconds. - -config S3C2410_BOOT_ERROR_RESET - bool "S3C2410 Reboot on decompression error" - depends on ARCH_S3C2410 - help - Say y here to use the watchdog to reset the system if the - kernel decompressor detects an error during decompression. - - -comment "S3C2410 Setup" - -config S3C2410_DMA - bool "S3C2410 DMA support" - depends on ARCH_S3C2410 - help - S3C2410 DMA support. This is needed for drivers like sound which - use the S3C2410's DMA system to move data to and from the - peripheral blocks. - -config S3C2410_DMA_DEBUG - bool "S3C2410 DMA support debug" - depends on ARCH_S3C2410 && S3C2410_DMA - help - Enable debugging output for the DMA code. This option sends info - to the kernel log, at priority KERN_DEBUG. - - Note, it is easy to create and fill the log buffer in a small - amount of time, as well as using an significant percentage of - the CPU time doing so. - - -config S3C2410_PM_DEBUG - bool "S3C2410 PM Suspend debug" - depends on ARCH_S3C2410 && PM - help - Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> - for more information. - -config S3C2410_PM_CHECK - bool "S3C2410 PM Suspend Memory CRC" - depends on ARCH_S3C2410 && PM && CRC32 - help - Enable the PM code's memory area checksum over sleep. This option - will generate CRCs of all blocks of memory, and store them before - going to sleep. The blocks are then checked on resume for any - errors. - -config S3C2410_PM_CHECK_CHUNKSIZE - int "S3C2410 PM Suspend CRC Chunksize (KiB)" - depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK - default 64 - help - Set the chunksize in Kilobytes of the CRC for checking memory - corruption over suspend and resume. A smaller value will mean that - the CRC data block will take more memory, but wil identify any - faults with better precision. - -config PM_SIMTEC - bool - help - Common power management code for systems that are - compatible with the Simtec style of power management - -config S3C2410_LOWLEVEL_UART_PORT - int "S3C2410 UART to use for low-level messages" - default 0 - help - Choice of which UART port to use for the low-level messages, - such as the `Uncompressing...` at start time. The value of - this configuration should be between zero and two. The port - must have been initialised by the boot-loader before use. - - Note, this does not affect the port used by the debug messages, - which is a separate configuration. - -endif diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 27663e28cc8..9a3d3d24c08 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -1,92 +1,31 @@ - +# arch/arm/mach-s3c2410/Makefile # -# Makefile for the linux kernel. +# Copyright 2007 Simtec Electronics # +# Licensed under GPLv2 -# Object file lists. - -obj-y := cpu.o irq.o time.o gpio.o clock.o devs.o -obj-m := -obj-n := -obj- := -obj-dma-y := -obj-dma-n := - -# DMA -obj-$(CONFIG_S3C2410_DMA) += dma.o - -# S3C2400 support files -obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o - -# S3C2410 support files +obj-y := +obj-m := +obj-n := +obj- := obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o -obj-$(CONFIG_CPU_S3C2410) += s3c2410-irq.o - -obj-$(CONFIG_S3C2410_PM) += s3c2410-pm.o s3c2410-sleep.o -obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o - -# Power Management support - -obj-$(CONFIG_PM) += pm.o sleep.o -obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o -obj-$(CONFIG_PM_H1940) += pm-h1940.o - -# S3C2412 support -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o -obj-dma-$(CONFIG_CPU_S3C2412) += s3c2412-dma.o - -obj-$(CONFIG_S3C2412_PM) += s3c2412-pm.o - -# -# S3C244X support - -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o - -# Clock control - -obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o - -# S3C2440 support - -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o -obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o -obj-dma-$(CONFIG_CPU_S3C2440) += s3c2440-dma.o +obj-$(CONFIG_CPU_S3C2410) += irq.o +obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o +obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o +obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o +obj-$(CONFIG_S3C2410_GPIO) += gpio.o +obj-$(CONFIG_S3C2410_CLOCK) += clock.o -# S3C2442 support +# Machine support -obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o - -# bast extras - -obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o - -# merge in dma objects - -obj-y += $(obj-dma-y) - -# machine specific support - -obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o -obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o -obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o -obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o +obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o obj-$(CONFIG_ARCH_H1940) += mach-h1940.o +obj-$(CONFIG_PM_H1940) += pm-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o -obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o -obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o -obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o -obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o -obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o +obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o obj-$(CONFIG_MACH_OTOM) += mach-otom.o -obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o -obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o - -obj-$(CONFIG_MACH_SMDK) += common-smdk.o
\ No newline at end of file +obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o +obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o +obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 379efe70778..daeba427d78 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -39,7 +39,7 @@ #include <asm/arch/bast-map.h> #include <asm/arch/bast-irq.h> -#include "irq.h" +#include <asm/plat-s3c24xx/irq.h> #if 0 #include <asm/debug-ll.h> diff --git a/arch/arm/mach-s3c2410/bast.h b/arch/arm/mach-s3c2410/bast.h index e5d03311752..e98543742eb 100644 --- a/arch/arm/mach-s3c2410/bast.h +++ b/arch/arm/mach-s3c2410/bast.h @@ -1,2 +1,2 @@ - +/* linux/arch/arm/mach-s3c2410/bast.h extern void bast_init_irq(void); diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index e13fb677889..5b4831c4c1d 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -1,15 +1,9 @@ /* linux/arch/arm/mach-s3c2410/clock.c * - * Copyright (c) 2004-2005 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C24XX Core clock control support - * - * Based on, and code from linux/arch/arm/mach-versatile/clock.c - ** - ** Copyright (C) 2004 ARM Limited. - ** Written by Deep Blue Solutions Limited. - * + * S3C2410,S3C2440,S3C2442 Clock control support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -32,418 +26,251 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> -#include <linux/platform_device.h> #include <linux/sysdev.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> #include <linux/clk.h> #include <linux/mutex.h> #include <linux/delay.h> +#include <linux/serial_core.h> + +#include <asm/mach/map.h> #include <asm/hardware.h> -#include <asm/irq.h> #include <asm/io.h> +#include <asm/arch/regs-serial.h> #include <asm/arch/regs-clock.h> #include <asm/arch/regs-gpio.h> -#include "clock.h" -#include "cpu.h" - -/* clock information */ +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> -static LIST_HEAD(clocks); - -DEFINE_MUTEX(clocks_mutex); - -/* enable and disable calls for use with the clk struct */ - -static int clk_null_enable(struct clk *clk, int enable) +int s3c2410_clkcon_enable(struct clk *clk, int enable) { - return 0; -} - -/* Clock API calls */ + unsigned int clocks = clk->ctrlbit; + unsigned long clkcon; -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p; - struct clk *clk = ERR_PTR(-ENOENT); - int idno; + clkcon = __raw_readl(S3C2410_CLKCON); - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; + if (enable) + clkcon |= clocks; else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, list) { - if (p->id == idno && - strcmp(id, p->name) == 0 && - try_module_get(p->owner)) { - clk = p; - break; - } - } - - /* check for the case where a device was supplied, but the - * clock that was being searched for is not device specific */ - - if (IS_ERR(clk)) { - list_for_each_entry(p, &clocks, list) { - if (p->id == -1 && strcmp(id, p->name) == 0 && - try_module_get(p->owner)) { - clk = p; - break; - } - } - } + clkcon &= ~clocks; - mutex_unlock(&clocks_mutex); - return clk; -} + /* ensure none of the special function bits set */ + clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); -void clk_put(struct clk *clk) -{ - module_put(clk->owner); -} + __raw_writel(clkcon, S3C2410_CLKCON); -int clk_enable(struct clk *clk) -{ - if (IS_ERR(clk) || clk == NULL) - return -EINVAL; - - clk_enable(clk->parent); - - mutex_lock(&clocks_mutex); - - if ((clk->usage++) == 0) - (clk->enable)(clk, 1); - - mutex_unlock(&clocks_mutex); return 0; } -void clk_disable(struct clk *clk) -{ - if (IS_ERR(clk) || clk == NULL) - return; - - mutex_lock(&clocks_mutex); - - if ((--clk->usage) == 0) - (clk->enable)(clk, 0); - - mutex_unlock(&clocks_mutex); - clk_disable(clk->parent); -} - - -unsigned long clk_get_rate(struct clk *clk) -{ - if (IS_ERR(clk)) - return 0; - - if (clk->rate != 0) - return clk->rate; - - if (clk->get_rate != NULL) - return (clk->get_rate)(clk); - - if (clk->parent != NULL) - return clk_get_rate(clk->parent); - - return clk->rate; -} - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (!IS_ERR(clk) && clk->round_rate) - return (clk->round_rate)(clk, rate); - - return rate; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret; - - if (IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - ret = (clk->set_rate)(clk, rate); - mutex_unlock(&clocks_mutex); - - return ret; -} - -struct clk *clk_get_parent(struct clk *clk) +static int s3c2410_upll_enable(struct clk *clk, int enable) { - return clk->parent; -} - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret = 0; - - if (IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - - if (clk->set_parent) - ret = (clk->set_parent)(clk, parent); - - mutex_unlock(&clocks_mutex); - - return ret; -} - -EXPORT_SYMBOL(clk_get); -EXPORT_SYMBOL(clk_put); -EXPORT_SYMBOL(clk_enable); -EXPORT_SYMBOL(clk_disable); -EXPORT_SYMBOL(clk_get_rate); -EXPORT_SYMBOL(clk_round_rate); -EXPORT_SYMBOL(clk_set_rate); -EXPORT_SYMBOL(clk_get_parent); -EXPORT_SYMBOL(clk_set_parent); - -/* base clocks */ - -struct clk clk_xtal = { - .name = "xtal", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_mpll = { - .name = "mpll", - .id = -1, -}; - -struct clk clk_upll = { - .name = "upll", - .id = -1, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_f = { - .name = "fclk", - .id = -1, - .rate = 0, - .parent = &clk_mpll, - .ctrlbit = 0, -}; - -struct clk clk_h = { - .name = "hclk", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_p = { - .name = "pclk", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_usb_bus = { - .name = "usb-bus", - .id = -1, - .rate = 0, - .parent = &clk_upll, -}; - -/* clocks that could be registered by external code */ - -static int s3c24xx_dclk_enable(struct clk *clk, int enable) -{ - unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); + unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); + unsigned long orig = clkslow; if (enable) - dclkcon |= clk->ctrlbit; + clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; else - dclkcon &= ~clk->ctrlbit; + clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - __raw_writel(dclkcon, S3C24XX_DCLKCON); + __raw_writel(clkslow, S3C2410_CLKSLOW); - return 0; -} + /* if we started the UPLL, then allow to settle */ -static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long dclkcon; - unsigned int uclk; - - if (parent == &clk_upll) - uclk = 1; - else if (parent == &clk_p) - uclk = 0; - else - return -EINVAL; - - clk->parent = parent; - - dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; - } else { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; - } - - __raw_writel(dclkcon, S3C24XX_DCLKCON); + if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) + udelay(200); return 0; } - -static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long mask; - unsigned long source; - - /* calculate the MISCCR setting for the clock */ - - if (parent == &clk_xtal) - source = S3C2410_MISCCR_CLK0_MPLL; - else if (parent == &clk_upll) - source = S3C2410_MISCCR_CLK0_UPLL; - else if (parent == &clk_f) - source = S3C2410_MISCCR_CLK0_FCLK; - else if (parent == &clk_h) - source = S3C2410_MISCCR_CLK0_HCLK; - else if (parent == &clk_p) - source = S3C2410_MISCCR_CLK0_PCLK; - else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) - source = S3C2410_MISCCR_CLK0_DCLK0; - else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) - source = S3C2410_MISCCR_CLK0_DCLK0; - else - return -EINVAL; - - clk->parent = parent; - - if (clk == &s3c24xx_dclk0) - mask = S3C2410_MISCCR_CLK0_MASK; - else { - source <<= 4; - mask = S3C2410_MISCCR_CLK1_MASK; +/* standard clock definitions */ + +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_NAND, + }, { + .name = "sdi", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_SDI, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_IIC, + }, { + .name = "iis", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_IIS, + }, { + .name = "spi", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_SPI, } - - s3c2410_modify_misccr(mask, source); - return 0; -} - -/* external clock definitions */ - -struct clk s3c24xx_dclk0 = { - .name = "dclk0", - .id = -1, - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, -}; - -struct clk s3c24xx_dclk1 = { - .name = "dclk1", - .id = -1, - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, }; -struct clk s3c24xx_clkout0 = { - .name = "clkout0", - .id = -1, - .set_parent = s3c24xx_clkout_setparent, +static struct clk init_clocks[] = { + { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_LCDC, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBD, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_PWMT, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART2, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = 0, + }, { + .name = "usb-bus-host", + .id = -1, + .parent = &clk_usb_bus, + }, { + .name = "usb-bus-gadget", + .id = -1, + .parent = &clk_usb_bus, + }, }; -struct clk s3c24xx_clkout1 = { - .name = "clkout1", - .id = -1, - .set_parent = s3c24xx_clkout_setparent, -}; - -struct clk s3c24xx_uclk = { - .name = "uclk", - .id = -1, -}; - -/* initialise the clock system */ - -int s3c24xx_register_clock(struct clk *clk) -{ - clk->owner = THIS_MODULE; - - if (clk->enable == NULL) - clk->enable = clk_null_enable; - - /* add to the list of available clocks */ - - mutex_lock(&clocks_mutex); - list_add(&clk->list, &clocks); - mutex_unlock(&clocks_mutex); - - return 0; -} - -/* initalise all the clocks */ +/* s3c2410_baseclk_add() + * + * Add all the clocks used by the s3c2410 or compatible CPUs + * such as the S3C2440 and S3C2442. + * + * We cannot use a system device as we are needed before any + * of the init-calls that initialise the devices are actually + * done. +*/ -int __init s3c24xx_setup_clocks(unsigned long xtal, - unsigned long fclk, - unsigned long hclk, - unsigned long pclk) +int __init s3c2410_baseclk_add(void) { - printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n"); + unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); + unsigned long clkcon = __raw_readl(S3C2410_CLKCON); + struct clk *clkp; + struct clk *xtal; + int ret; + int ptr; - /* initialise the main system clocks */ + clk_upll.enable = s3c2410_upll_enable; - clk_xtal.rate = xtal; - clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal); + if (s3c24xx_register_clock(&clk_usb_bus) < 0) + printk(KERN_ERR "failed to register usb bus clock\n"); - clk_mpll.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; + /* register clocks from clock array */ - /* assume uart clocks are correctly setup */ + clkp = init_clocks; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { + /* ensure that we note the clock state */ - /* register our clocks */ + clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - if (s3c24xx_register_clock(&clk_xtal) < 0) - printk(KERN_ERR "failed to register master xtal\n"); + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } - if (s3c24xx_register_clock(&clk_mpll) < 0) - printk(KERN_ERR "failed to register mpll clock\n"); + /* We must be careful disabling the clocks we are not intending to + * be using at boot time, as subsytems such as the LCD which do + * their own DMA requests to the bus can cause the system to lockup + * if they where in the middle of requesting bus access. + * + * Disabling the LCD clock if the LCD is active is very dangerous, + * and therefore the bootloader should be careful to not enable + * the LCD clock if it is not needed. + */ + + /* install (and disable) the clocks we do not need immediately */ + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } - if (s3c24xx_register_clock(&clk_upll) < 0) - printk(KERN_ERR "failed to register upll clock\n"); + s3c2410_clkcon_enable(clkp, 0); + } - if (s3c24xx_register_clock(&clk_f) < 0) - printk(KERN_ERR "failed to register cpu fclk\n"); + /* show the clock-slow value */ - if (s3c24xx_register_clock(&clk_h) < 0) - printk(KERN_ERR "failed to register cpu hclk\n"); + xtal = clk_get(NULL, "xtal"); - if (s3c24xx_register_clock(&clk_p) < 0) - printk(KERN_ERR "failed to register cpu pclk\n"); + printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", + print_mhz(clk_get_rate(xtal) / + ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), + (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", + (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", + (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); return 0; } diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h deleted file mode 100644 index 7f0ea03e1d4..00000000000 --- a/arch/arm/mach-s3c2410/clock.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/arm/mach-s3c2410/clock.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * Written by Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct clk { - struct list_head list; - struct module *owner; - struct clk *parent; - const char *name; - int id; - int usage; - unsigned long rate; - unsigned long ctrlbit; - - int (*enable)(struct clk *, int enable); - int (*set_rate)(struct clk *c, unsigned long rate); - unsigned long (*get_rate)(struct clk *c); - unsigned long (*round_rate)(struct clk *c, unsigned long rate); - int (*set_parent)(struct clk *c, struct clk *parent); -}; - -/* other clocks which may be registered by board support */ - -extern struct clk s3c24xx_dclk0; -extern struct clk s3c24xx_dclk1; -extern struct clk s3c24xx_clkout0; -extern struct clk s3c24xx_clkout1; -extern struct clk s3c24xx_uclk; - -extern struct clk clk_usb_bus; - -/* core clock support */ - -extern struct clk clk_f; -extern struct clk clk_h; -extern struct clk clk_p; -extern struct clk clk_mpll; -extern struct clk clk_upll; -extern struct clk clk_xtal; - -/* exports for arch/arm/mach-s3c2410 - * - * Please DO NOT use these outside of arch/arm/mach-s3c2410 -*/ - -extern struct mutex clocks_mutex; - -extern int s3c2410_clkcon_enable(struct clk *clk, int enable); - -extern int s3c24xx_register_clock(struct clk *clk); - -extern int s3c24xx_setup_clocks(unsigned long xtal, - unsigned long fclk, - unsigned long hclk, - unsigned long pclk); diff --git a/arch/arm/mach-s3c2410/common-smdk.c b/arch/arm/mach-s3c2410/common-smdk.c deleted file mode 100644 index a40eaa65617..00000000000 --- a/arch/arm/mach-s3c2410/common-smdk.c +++ /dev/null @@ -1,200 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/common-smdk.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Common code for SMDK2410 and SMDK2440 boards - * - * http://www.fluff.org/ben/smdk2440/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/arch/regs-gpio.h> -#include <asm/arch/leds-gpio.h> - -#include <asm/arch/nand.h> - -#include "common-smdk.h" -#include "devs.h" -#include "pm.h" - -/* LED devices */ - -static struct s3c24xx_led_platdata smdk_pdata_led4 = { - .gpio = S3C2410_GPF4, - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .name = "led4", - .def_trigger = "timer", -}; - -static struct s3c24xx_led_platdata smdk_pdata_led5 = { - .gpio = S3C2410_GPF5, - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .name = "led5", - .def_trigger = "nand-disk", -}; - -static struct s3c24xx_led_platdata smdk_pdata_led6 = { - .gpio = S3C2410_GPF6, - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .name = "led6", -}; - -static struct s3c24xx_led_platdata smdk_pdata_led7 = { - .gpio = S3C2410_GPF7, - .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, - .name = "led7", -}; - -static struct platform_device smdk_led4 = { - .name = "s3c24xx_led", - .id = 0, - .dev = { - .platform_data = &smdk_pdata_led4, - }, -}; - -static struct platform_device smdk_led5 = { - .name = "s3c24xx_led", - .id = 1, - .dev = { - .platform_data = &smdk_pdata_led5, - }, -}; - -static struct platform_device smdk_led6 = { - .name = "s3c24xx_led", - .id = 2, - .dev = { - .platform_data = &smdk_pdata_led6, - }, -}; - -static struct platform_device smdk_led7 = { - .name = "s3c24xx_led", - .id = 3, - .dev = { - .platform_data = &smdk_pdata_led7, - }, -}; - -/* NAND parititon from 2.4.18-swl5 */ - -static struct mtd_partition smdk_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "S3C2410 flash partition 1", - .offset = 0, - .size = SZ_2M, - }, - [2] = { - .name = "S3C2410 flash partition 2", - .offset = SZ_4M, - .size = SZ_4M, - }, - [3] = { - .name = "S3C2410 flash partition 3", - .offset = SZ_8M, - .size = SZ_2M, - }, - [4] = { - .name = "S3C2410 flash partition 4", - .offset = SZ_1M * 10, - .size = SZ_4M, - }, - [5] = { - .name = "S3C2410 flash partition 5", - .offset = SZ_1M * 14, - .size = SZ_1M * 10, - }, - [6] = { - .name = "S3C2410 flash partition 6", - .offset = SZ_1M * 24, - .size = SZ_1M * 24, - }, - [7] = { - .name = "S3C2410 flash partition 7", - .offset = SZ_1M * 48, - .size = SZ_16M, - } -}; - -static struct s3c2410_nand_set smdk_nand_sets[] = { - [0] = { - .name = "NAND", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(smdk_default_nand_part), - .partitions = smdk_default_nand_part, - }, -}; - -/* choose a set of timings which should suit most 512Mbit - * chips and beyond. -*/ - -static struct s3c2410_platform_nand smdk_nand_info = { - .tacls = 20, - .twrph0 = 60, - .twrph1 = 20, - .nr_sets = ARRAY_SIZE(smdk_nand_sets), - .sets = smdk_nand_sets, -}; - -/* devices we initialise */ - -static struct platform_device __initdata *smdk_devs[] = { - &s3c_device_nand, - &smdk_led4, - &smdk_led5, - &smdk_led6, - &smdk_led7, -}; - -void __init smdk_machine_init(void) -{ - /* Configure the LEDs (even if we have no LED support)*/ - - s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP); - - s3c2410_gpio_setpin(S3C2410_GPF4, 1); - s3c2410_gpio_setpin(S3C2410_GPF5, 1); - s3c2410_gpio_setpin(S3C2410_GPF6, 1); - s3c2410_gpio_setpin(S3C2410_GPF7, 1); - - s3c_device_nand.dev.platform_data = &smdk_nand_info; - - platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); - - s3c2410_pm_init(); -} diff --git a/arch/arm/mach-s3c2410/common-smdk.h b/arch/arm/mach-s3c2410/common-smdk.h deleted file mode 100644 index 0e3a3be330a..00000000000 --- a/arch/arm/mach-s3c2410/common-smdk.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/common-smdk.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Common code for SMDK2410 and SMDK2440 boards - * - * http://www.fluff.org/ben/smdk2440/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void smdk_machine_init(void); diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c deleted file mode 100644 index ae1f5bb63f7..00000000000 --- a/arch/arm/mach-s3c2410/cpu.c +++ /dev/null @@ -1,357 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/cpu.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX CPU Support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/delay.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-serial.h> - -#include "cpu.h" -#include "devs.h" -#include "clock.h" -#include "s3c2400.h" -#include "s3c2410.h" -#include "s3c2412.h" -#include "s3c244x.h" -#include "s3c2440.h" -#include "s3c2442.h" - -struct cpu_table { - unsigned long idcode; - unsigned long idmask; - void (*map_io)(struct map_desc *mach_desc, int size); - void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no); - void (*init_clocks)(int xtal); - int (*init)(void); - const char *name; -}; - -/* table of supported CPUs */ - -static const char name_s3c2400[] = "S3C2400"; -static const char name_s3c2410[] = "S3C2410"; -static const char name_s3c2412[] = "S3C2412"; -static const char name_s3c2440[] = "S3C2440"; -static const char name_s3c2442[] = "S3C2442"; -static const char name_s3c2410a[] = "S3C2410A"; -static const char name_s3c2440a[] = "S3C2440A"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = 0x32410000, - .idmask = 0xffffffff, - .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, - .init_uarts = s3c2410_init_uarts, - .init = s3c2410_init, - .name = name_s3c2410 - }, - { - .idcode = 0x32410002, - .idmask = 0xffffffff, - .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, - .init_uarts = s3c2410_init_uarts, - .init = s3c2410_init, - .name = name_s3c2410a - }, - { - .idcode = 0x32440000, - .idmask = 0xffffffff, - .map_io = s3c244x_map_io, - .init_clocks = s3c244x_init_clocks, - .init_uarts = s3c244x_init_uarts, - .init = s3c2440_init, - .name = name_s3c2440 - }, - { - .idcode = 0x32440001, - .idmask = 0xffffffff, - .map_io = s3c244x_map_io, - .init_clocks = s3c244x_init_clocks, - .init_uarts = s3c244x_init_uarts, - .init = s3c2440_init, - .name = name_s3c2440a - }, - { - .idcode = 0x32440aaa, - .idmask = 0xffffffff, - .map_io = s3c244x_map_io, - .init_clocks = s3c244x_init_clocks, - .init_uarts = s3c244x_init_uarts, - .init = s3c2442_init, - .name = name_s3c2442 - }, - { - .idcode = 0x32412001, - .idmask = 0xffffffff, - .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, - .init_uarts = s3c2412_init_uarts, - .init = s3c2412_init, - .name = name_s3c2412, - }, - { /* a newer version of the s3c2412 */ - .idcode = 0x32412003, - .idmask = 0xffffffff, - .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, - .init_uarts = s3c2412_init_uarts, - .init = s3c2412_init, - .name = name_s3c2412, - }, - { - .idcode = 0x0, /* S3C2400 doesn't have an idcode */ - .idmask = 0xffffffff, - .map_io = s3c2400_map_io, - .init_clocks = s3c2400_init_clocks, - .init_uarts = s3c2400_init_uarts, - .init = s3c2400_init, - .name = name_s3c2400 - }, -}; - -/* minimal IO mapping */ - -static struct map_desc s3c_iodesc[] __initdata = { - IODESC_ENT(GPIO), - IODESC_ENT(IRQ), - IODESC_ENT(MEMCTRL), - IODESC_ENT(UART) -}; - - -static struct cpu_table * -s3c_lookup_cpu(unsigned long idcode) -{ - struct cpu_table *tab; - int count; - - tab = cpu_ids; - for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) { - if ((idcode & tab->idmask) == tab->idcode) - return tab; - } - - return NULL; -} - -/* board information */ - -static struct s3c24xx_board *board; - -void s3c24xx_set_board(struct s3c24xx_board *b) -{ - int i; - - board = b; - - if (b->clocks_count != 0) { - struct clk **ptr = b->clocks; - - for (i = b->clocks_count; i > 0; i--, ptr++) - s3c24xx_register_clock(*ptr); - } -} - -/* cpu information */ - -static struct cpu_table *cpu; - -static unsigned long s3c24xx_read_idcode_v5(void) -{ -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) - return __raw_readl(S3C2412_GSTATUS1); -#else - return 1UL; /* don't look like an 2400 */ -#endif -} - -static unsigned long s3c24xx_read_idcode_v4(void) -{ -#ifndef CONFIG_CPU_S3C2400 - return __raw_readl(S3C2410_GSTATUS1); -#else - return 0UL; -#endif -} - -void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) -{ - unsigned long idcode = 0x0; - - /* initialise the io descriptors we need for initialisation */ - iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); - - if (cpu_architecture() >= CPU_ARCH_ARMv5) { - idcode = s3c24xx_read_idcode_v5(); - } else { - idcode = s3c24xx_read_idcode_v4(); - } - - cpu = s3c_lookup_cpu(idcode); - - if (cpu == NULL) { - printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode); - panic("Unknown S3C24XX CPU"); - } - - printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); - - if (cpu->map_io == NULL || cpu->init == NULL) { - printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); - panic("Unsupported S3C24XX CPU"); - } - - (cpu->map_io)(mach_desc, size); -} - -/* s3c24xx_init_clocks - * - * Initialise the clock subsystem and associated information from the - * given master crystal value. - * - * xtal = 0 -> use default PLL crystal value (normally 12MHz) - * != 0 -> PLL crystal value in Hz -*/ - -void __init s3c24xx_init_clocks(int xtal) -{ - if (xtal == 0) - xtal = 12*1000*1000; - - if (cpu == NULL) - panic("s3c24xx_init_clocks: no cpu setup?\n"); - - if (cpu->init_clocks == NULL) - panic("s3c24xx_init_clocks: cpu has no clock init\n"); - else - (cpu->init_clocks)(xtal); -} - -/* uart management */ - -static int nr_uarts __initdata = 0; - -static struct s3c2410_uartcfg uart_cfgs[3]; - -/* s3c24xx_init_uartdevs - * - * copy the specified platform data and configuration into our central - * set of devices, before the data is thrown away after the init process. - * - * This also fills in the array passed to the serial driver for the - * early initialisation of the console. -*/ - -void __init s3c24xx_init_uartdevs(char *name, - struct s3c24xx_uart_resources *res, - struct s3c2410_uartcfg *cfg, int no) -{ - struct platform_device *platdev; - struct s3c2410_uartcfg *cfgptr = uart_cfgs; - struct s3c24xx_uart_resources *resp; - int uart; - - memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no); - - for (uart = 0; uart < no; uart++, cfg++, cfgptr++) { - platdev = s3c24xx_uart_src[cfgptr->hwport]; - - resp = res + cfgptr->hwport; - - s3c24xx_uart_devs[uart] = platdev; - - platdev->name = name; - platdev->resource = resp->resources; - platdev->num_resources = resp->nr_resources; - - platdev->dev.platform_data = cfgptr; - } - - nr_uarts = no; -} - -void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - if (cpu == NULL) - return; - - if (cpu->init_uarts == NULL) { - printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); - } else - (cpu->init_uarts)(cfg, no); -} - -static int __init s3c_arch_init(void) -{ - int ret; - - // do the correct init for cpu - - if (cpu == NULL) - panic("s3c_arch_init: NULL cpu\n"); - - ret = (cpu->init)(); - if (ret != 0) - return ret; - - ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts); - if (ret != 0) - return ret; - - if (board != NULL) { - struct platform_device **ptr = board->devices; - int i; - - for (i = 0; i < board->devices_count; i++, ptr++) { - ret = platform_device_register(*ptr); - - if (ret) { - printk(KERN_ERR "s3c24xx: failed to add board device %s (%d) @%p\n", (*ptr)->name, ret, *ptr); - } - } - - /* mask any error, we may not need all these board - * devices */ - ret = 0; - } - - return ret; -} - -arch_initcall(s3c_arch_init); diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h deleted file mode 100644 index be42e4032a6..00000000000 --- a/arch/arm/mach-s3c2410/cpu.h +++ /dev/null @@ -1,69 +0,0 @@ -/* arch/arm/mach-s3c2410/cpu.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C24XX CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* todo - fix when rmk changes iodescs to use `void __iomem *` */ - -#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } - -#ifndef MHZ -#define MHZ (1000*1000) -#endif - -#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000) - -/* forward declaration */ -struct s3c24xx_uart_resources; -struct platform_device; -struct s3c2410_uartcfg; -struct map_desc; - -/* core initialisation functions */ - -extern void s3c24xx_init_irq(void); - -extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); - -extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c24xx_init_clocks(int xtal); - -extern void s3c24xx_init_uartdevs(char *name, - struct s3c24xx_uart_resources *res, - struct s3c2410_uartcfg *cfg, int no); - -/* the board structure is used at first initialsation time - * to get info such as the devices to register for this - * board. This is done because platfrom_add_devices() cannot - * be called from the map_io entry. -*/ - -struct s3c24xx_board { - struct platform_device **devices; - unsigned int devices_count; - - struct clk **clocks; - unsigned int clocks_count; -}; - -extern void s3c24xx_set_board(struct s3c24xx_board *board); - -/* timer for 2410/2440 */ - -struct sys_timer; -extern struct sys_timer s3c24xx_timer; - -/* system device classes */ - -extern struct sysdev_class s3c2410_sysclass; -extern struct sysdev_class s3c2412_sysclass; -extern struct sysdev_class s3c2440_sysclass; -extern struct sysdev_class s3c2442_sysclass; diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c deleted file mode 100644 index faccde2092d..00000000000 --- a/arch/arm/mach-s3c2410/devs.c +++ /dev/null @@ -1,585 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/devs.c - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Base S3C24XX platform device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/arch/fb.h> -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/arch/regs-serial.h> - -#include "devs.h" -#include "cpu.h" - -/* Serial port registrations */ - -static struct resource s3c2410_uart0_resource[] = { - [0] = { - .start = S3C2410_PA_UART0, - .end = S3C2410_PA_UART0 + 0x3fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX0, - .end = IRQ_S3CUART_ERR0, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource s3c2410_uart1_resource[] = { - [0] = { - .start = S3C2410_PA_UART1, - .end = S3C2410_PA_UART1 + 0x3fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX1, - .end = IRQ_S3CUART_ERR1, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource s3c2410_uart2_resource[] = { - [0] = { - .start = S3C2410_PA_UART2, - .end = S3C2410_PA_UART2 + 0x3fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX2, - .end = IRQ_S3CUART_ERR2, - .flags = IORESOURCE_IRQ, - } -}; - -struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { - [0] = { - .resources = s3c2410_uart0_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource), - }, - [1] = { - .resources = s3c2410_uart1_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource), - }, - [2] = { - .resources = s3c2410_uart2_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource), - }, -}; - -/* yart devices */ - -static struct platform_device s3c24xx_uart_device0 = { - .id = 0, -}; - -static struct platform_device s3c24xx_uart_device1 = { - .id = 1, -}; - -static struct platform_device s3c24xx_uart_device2 = { - .id = 2, -}; - -struct platform_device *s3c24xx_uart_src[3] = { - &s3c24xx_uart_device0, - &s3c24xx_uart_device1, - &s3c24xx_uart_device2, -}; - -struct platform_device *s3c24xx_uart_devs[3] = { -}; - -/* USB Host Controller */ - -static struct resource s3c_usb_resource[] = { - [0] = { - .start = S3C24XX_PA_USBHOST, - .end = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBH, - .end = IRQ_USBH, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s3c_device_usb_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_usb = { - .name = "s3c2410-ohci", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_usb_resource), - .resource = s3c_usb_resource, - .dev = { - .dma_mask = &s3c_device_usb_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_usb); - -/* LCD Controller */ - -static struct resource s3c_lcd_resource[] = { - [0] = { - .start = S3C24XX_PA_LCD, - .end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_LCD, - .end = IRQ_LCD, - .flags = IORESOURCE_IRQ, - } - -}; - -static u64 s3c_device_lcd_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_lcd = { - .name = "s3c2410-lcd", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_lcd_resource), - .resource = s3c_lcd_resource, - .dev = { - .dma_mask = &s3c_device_lcd_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_lcd); - -void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) -{ - struct s3c2410fb_mach_info *npd; - - npd = kmalloc(sizeof(*npd), GFP_KERNEL); - if (npd) { - memcpy(npd, pd, sizeof(*npd)); - s3c_device_lcd.dev.platform_data = npd; - } else { - printk(KERN_ERR "no memory for LCD platform data\n"); - } -} - -/* NAND Controller */ - -static struct resource s3c_nand_resource[] = { - [0] = { - .start = S3C2410_PA_NAND, - .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1, - .flags = IORESOURCE_MEM, - } -}; - -struct platform_device s3c_device_nand = { - .name = "s3c2410-nand", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_nand_resource), - .resource = s3c_nand_resource, -}; - -EXPORT_SYMBOL(s3c_device_nand); - -/* USB Device (Gadget)*/ - -static struct resource s3c_usbgadget_resource[] = { - [0] = { - .start = S3C24XX_PA_USBDEV, - .end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBD, - .end = IRQ_USBD, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_usbgadget = { - .name = "s3c2410-usbgadget", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_usbgadget_resource), - .resource = s3c_usbgadget_resource, -}; - -EXPORT_SYMBOL(s3c_device_usbgadget); - -/* Watchdog */ - -static struct resource s3c_wdt_resource[] = { - [0] = { - .start = S3C24XX_PA_WATCHDOG, - .end = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_WDT, - .end = IRQ_WDT, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_wdt = { - .name = "s3c2410-wdt", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_wdt_resource), - .resource = s3c_wdt_resource, -}; - -EXPORT_SYMBOL(s3c_device_wdt); - -/* I2C */ - -static struct resource s3c_i2c_resource[] = { - [0] = { - .start = S3C24XX_PA_IIC, - .end = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IIC, - .end = IRQ_IIC, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_i2c = { - .name = "s3c2410-i2c", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_i2c_resource), - .resource = s3c_i2c_resource, -}; - -EXPORT_SYMBOL(s3c_device_i2c); - -/* IIS */ - -static struct resource s3c_iis_resource[] = { - [0] = { - .start = S3C24XX_PA_IIS, - .end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1, - .flags = IORESOURCE_MEM, - } -}; - -static u64 s3c_device_iis_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_iis = { - .name = "s3c2410-iis", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_iis_resource), - .resource = s3c_iis_resource, - .dev = { - .dma_mask = &s3c_device_iis_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_iis); - -/* RTC */ - -static struct resource s3c_rtc_resource[] = { - [0] = { - .start = S3C24XX_PA_RTC, - .end = S3C24XX_PA_RTC + 0xff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTC, - .end = IRQ_RTC, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_TICK, - .end = IRQ_TICK, - .flags = IORESOURCE_IRQ - } -}; - -struct platform_device s3c_device_rtc = { - .name = "s3c2410-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_rtc_resource), - .resource = s3c_rtc_resource, -}; - -EXPORT_SYMBOL(s3c_device_rtc); - -/* ADC */ - -static struct resource s3c_adc_resource[] = { - [0] = { - .start = S3C24XX_PA_ADC, - .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TC, - .end = IRQ_TC, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_ADC, - .end = IRQ_ADC, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_adc = { - .name = "s3c2410-adc", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_adc_resource), - .resource = s3c_adc_resource, -}; - -/* SDI */ - -static struct resource s3c_sdi_resource[] = { - [0] = { - .start = S3C2410_PA_SDI, - .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SDI, - .end = IRQ_SDI, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_sdi = { - .name = "s3c2410-sdi", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_sdi_resource), - .resource = s3c_sdi_resource, -}; - -EXPORT_SYMBOL(s3c_device_sdi); - -/* SPI (0) */ - -static struct resource s3c_spi0_resource[] = { - [0] = { - .start = S3C24XX_PA_SPI, - .end = S3C24XX_PA_SPI + 0x1f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - } - -}; - -static u64 s3c_device_spi0_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_spi0 = { - .name = "s3c2410-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s3c_spi0_resource), - .resource = s3c_spi0_resource, - .dev = { - .dma_mask = &s3c_device_spi0_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_spi0); - -/* SPI (1) */ - -static struct resource s3c_spi1_resource[] = { - [0] = { - .start = S3C24XX_PA_SPI + 0x20, - .end = S3C24XX_PA_SPI + 0x20 + 0x1f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - } - -}; - -static u64 s3c_device_spi1_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_spi1 = { - .name = "s3c2410-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s3c_spi1_resource), - .resource = s3c_spi1_resource, - .dev = { - .dma_mask = &s3c_device_spi1_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_spi1); - -/* pwm timer blocks */ - -static struct resource s3c_timer0_resource[] = { - [0] = { - .start = S3C24XX_PA_TIMER + 0x0C, - .end = S3C24XX_PA_TIMER + 0x0C + 0xB, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TIMER0, - .end = IRQ_TIMER0, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_timer0 = { - .name = "s3c2410-timer", - .id = 0, - .num_resources = ARRAY_SIZE(s3c_timer0_resource), - .resource = s3c_timer0_resource, -}; - -EXPORT_SYMBOL(s3c_device_timer0); - -/* timer 1 */ - -static struct resource s3c_timer1_resource[] = { - [0] = { - .start = S3C24XX_PA_TIMER + 0x18, - .end = S3C24XX_PA_TIMER + 0x23, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TIMER1, - .end = IRQ_TIMER1, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_timer1 = { - .name = "s3c2410-timer", - .id = 1, - .num_resources = ARRAY_SIZE(s3c_timer1_resource), - .resource = s3c_timer1_resource, -}; - -EXPORT_SYMBOL(s3c_device_timer1); - -/* timer 2 */ - -static struct resource s3c_timer2_resource[] = { - [0] = { - .start = S3C24XX_PA_TIMER + 0x24, - .end = S3C24XX_PA_TIMER + 0x2F, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TIMER2, - .end = IRQ_TIMER2, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_timer2 = { - .name = "s3c2410-timer", - .id = 2, - .num_resources = ARRAY_SIZE(s3c_timer2_resource), - .resource = s3c_timer2_resource, -}; - -EXPORT_SYMBOL(s3c_device_timer2); - -/* timer 3 */ - -static struct resource s3c_timer3_resource[] = { - [0] = { - .start = S3C24XX_PA_TIMER + 0x30, - .end = S3C24XX_PA_TIMER + 0x3B, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TIMER3, - .end = IRQ_TIMER3, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_timer3 = { - .name = "s3c2410-timer", - .id = 3, - .num_resources = ARRAY_SIZE(s3c_timer3_resource), - .resource = s3c_timer3_resource, -}; - -EXPORT_SYMBOL(s3c_device_timer3); - -#ifdef CONFIG_CPU_S3C2440 - -/* Camif Controller */ - -static struct resource s3c_camif_resource[] = { - [0] = { - .start = S3C2440_PA_CAMIF, - .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_CAM, - .end = IRQ_CAM, - .flags = IORESOURCE_IRQ, - } - -}; - -static u64 s3c_device_camif_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_camif = { - .name = "s3c2440-camif", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_camif_resource), - .resource = s3c_camif_resource, - .dev = { - .dma_mask = &s3c_device_camif_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_camif); - -#endif // CONFIG_CPU_S32440 diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h deleted file mode 100644 index 14fb0bade71..00000000000 --- a/arch/arm/mach-s3c2410/devs.h +++ /dev/null @@ -1,51 +0,0 @@ -/* arch/arm/mach-s3c2410/devs.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2410 standard platform devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ -#include <linux/platform_device.h> - -struct s3c24xx_uart_resources { - struct resource *resources; - unsigned long nr_resources; -}; - -extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; - -extern struct platform_device *s3c24xx_uart_devs[]; -extern struct platform_device *s3c24xx_uart_src[]; - -extern struct platform_device s3c_device_usb; -extern struct platform_device s3c_device_lcd; -extern struct platform_device s3c_device_wdt; -extern struct platform_device s3c_device_i2c; -extern struct platform_device s3c_device_iis; -extern struct platform_device s3c_device_rtc; -extern struct platform_device s3c_device_adc; -extern struct platform_device s3c_device_sdi; - -extern struct platform_device s3c_device_spi0; -extern struct platform_device s3c_device_spi1; - -extern struct platform_device s3c_device_nand; - -extern struct platform_device s3c_device_timer0; -extern struct platform_device s3c_device_timer1; -extern struct platform_device s3c_device_timer2; -extern struct platform_device s3c_device_timer3; - -extern struct platform_device s3c_device_usbgadget; - -/* s3c2440 specific devices */ - -#ifdef CONFIG_CPU_S3C2440 - -extern struct platform_device s3c_device_camif; - -#endif diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index fa860e716b4..67d1ad36397 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -1,9 +1,9 @@ /* linux/arch/arm/mach-s3c2410/dma.c * - * Copyright (c) 2003-2005,2006 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C2410 DMA core + * S3C2410 DMA selection * * http://armlinux.simtec.co.uk/ * @@ -12,1430 +12,170 @@ * published by the Free Software Foundation. */ - -#ifdef CONFIG_S3C2410_DMA_DEBUG -#define DEBUG -#endif - -#include <linux/module.h> +#include <linux/kernel.h> #include <linux/init.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> #include <linux/sysdev.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/delay.h> +#include <linux/serial_core.h> -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/hardware.h> -#include <asm/io.h> #include <asm/dma.h> - -#include <asm/mach/dma.h> -#include <asm/arch/map.h> - -#include "dma.h" - -/* io map for dma */ -static void __iomem *dma_base; -static struct kmem_cache *dma_kmem; - -struct s3c24xx_dma_selection dma_sel; - -/* dma channel state information */ -struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; - -/* debugging functions */ - -#define BUF_MAGIC (0xcafebabe) - -#define dmawarn(fmt...) printk(KERN_DEBUG fmt) - -#define dma_regaddr(chan, reg) ((chan)->regs + (reg)) - -#if 1 -#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg)) -#else -static inline void -dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) -{ - pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); - writel(val, dma_regaddr(chan, reg)); -} -#endif - -#define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) - -/* captured register state for debug */ - -struct s3c2410_dma_regstate { - unsigned long dcsrc; - unsigned long disrc; - unsigned long dstat; - unsigned long dcon; - unsigned long dmsktrig; +#include <asm/arch/dma.h> + +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/dma.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, }; -#ifdef CONFIG_S3C2410_DMA_DEBUG - -/* dmadbg_showregs - * - * simple debug routine to print the current state of the dma registers -*/ - -static void -dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs) -{ - regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC); - regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC); - regs->dstat = dma_rdreg(chan, S3C2410_DMA_DSTAT); - regs->dcon = dma_rdreg(chan, S3C2410_DMA_DCON); - regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); -} - -static void -dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan, - struct s3c2410_dma_regstate *regs) -{ - printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n", - chan->number, fname, line, - regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig, - regs->dcon); -} - -static void -dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan) -{ - struct s3c2410_dma_regstate state; - - dmadbg_capture(chan, &state); - - printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n", - chan->number, fname, line, chan->load_state, - chan->curr, chan->next, chan->end); - - dmadbg_dumpregs(fname, line, chan, &state); -} - -static void -dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) -{ - struct s3c2410_dma_regstate state; - - dmadbg_capture(chan, &state); - dmadbg_dumpregs(fname, line, chan, &state); -} - -#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan)) -#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan)) -#else -#define dbg_showregs(chan) do { } while(0) -#define dbg_showchan(chan) do { } while(0) -#endif /* CONFIG_S3C2410_DMA_DEBUG */ - -static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; - -/* lookup_dma_channel - * - * change the dma channel number given into a real dma channel id -*/ - -static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) -{ - if (channel & DMACH_LOW_LEVEL) - return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; - else - return dma_chan_map[channel]; -} - -/* s3c2410_dma_stats_timeout - * - * Update DMA stats from timeout info -*/ - -static void -s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val) +static void s3c2410_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) { - if (stats == NULL) - return; - - if (val > stats->timeout_longest) - stats->timeout_longest = val; - if (val < stats->timeout_shortest) - stats->timeout_shortest = val; - - stats->timeout_avg += val; + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; } -/* s3c2410_dma_waitforload - * - * wait for the DMA engine to load a buffer, and update the state accordingly -*/ - -static int -s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line) -{ - int timeout = chan->load_timeout; - int took; - - if (chan->load_state != S3C2410_DMALOAD_1LOADED) { - printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line); - return 0; - } - - if (chan->stats != NULL) - chan->stats->loads++; - - while (--timeout > 0) { - if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) { - took = chan->load_timeout - timeout; - - s3c2410_dma_stats_timeout(chan->stats, took); - - switch (chan->load_state) { - case S3C2410_DMALOAD_1LOADED: - chan->load_state = S3C2410_DMALOAD_1RUNNING; - break; - - default: - printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state); - } - - return 1; - } - } - - if (chan->stats != NULL) { - chan->stats->timeout_failed++; - } - - return 0; -} - - - -/* s3c2410_dma_loadbuffer - * - * load a buffer, and update the channel state -*/ - -static inline int -s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan, - struct s3c2410_dma_buf *buf) -{ - unsigned long reload; - - pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", - buf, (unsigned long)buf->data, buf->size); - - if (buf == NULL) { - dmawarn("buffer is NULL\n"); - return -EINVAL; - } - - /* check the state of the channel before we do anything */ - - if (chan->load_state == S3C2410_DMALOAD_1LOADED) { - dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n"); - } - - if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) { - dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n"); - } - - /* it would seem sensible if we are the last buffer to not bother - * with the auto-reload bit, so that the DMA engine will not try - * and load another transfer after this one has finished... - */ - if (chan->load_state == S3C2410_DMALOAD_NONE) { - pr_debug("load_state is none, checking for noreload (next=%p)\n", - buf->next); - reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0; - } else { - //pr_debug("load_state is %d => autoreload\n", chan->load_state); - reload = S3C2410_DCON_AUTORELOAD; - } - - if ((buf->data & 0xf0000000) != 0x30000000) { - dmawarn("dmaload: buffer is %p\n", (void *)buf->data); - } - - writel(buf->data, chan->addr_reg); - - dma_wrreg(chan, S3C2410_DMA_DCON, - chan->dcon | reload | (buf->size/chan->xfer_unit)); - - chan->next = buf->next; - - /* update the state of the channel */ - - switch (chan->load_state) { - case S3C2410_DMALOAD_NONE: - chan->load_state = S3C2410_DMALOAD_1LOADED; - break; - - case S3C2410_DMALOAD_1RUNNING: - chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING; - break; - - default: - dmawarn("dmaload: unknown state %d in loadbuffer\n", - chan->load_state); - break; - } - - return 0; -} - -/* s3c2410_dma_call_op - * - * small routine to call the op routine with the given op if it has been - * registered -*/ - -static void -s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op) -{ - if (chan->op_fn != NULL) { - (chan->op_fn)(chan, op); - } -} - -/* s3c2410_dma_buffdone - * - * small wrapper to check if callback routine needs to be called, and - * if so, call it -*/ - -static inline void -s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, - enum s3c2410_dma_buffresult result) -{ -#if 0 - pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", - chan->callback_fn, buf, buf->id, buf->size, result); -#endif - - if (chan->callback_fn != NULL) { - (chan->callback_fn)(chan, buf->id, buf->size, result); - } -} - -/* s3c2410_dma_start - * - * start a dma channel going -*/ - -static int s3c2410_dma_start(struct s3c2410_dma_chan *chan) -{ - unsigned long tmp; - unsigned long flags; - - pr_debug("s3c2410_start_dma: channel=%d\n", chan->number); - - local_irq_save(flags); - - if (chan->state == S3C2410_DMA_RUNNING) { - pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state); - local_irq_restore(flags); - return 0; - } - - chan->state = S3C2410_DMA_RUNNING; - - /* check wether there is anything to load, and if not, see - * if we can find anything to load - */ - - if (chan->load_state == S3C2410_DMALOAD_NONE) { - if (chan->next == NULL) { - printk(KERN_ERR "dma%d: channel has nothing loaded\n", - chan->number); - chan->state = S3C2410_DMA_IDLE; - local_irq_restore(flags); - return -EINVAL; - } - - s3c2410_dma_loadbuffer(chan, chan->next); - } - - dbg_showchan(chan); - - /* enable the channel */ - - if (!chan->irq_enabled) { - enable_irq(chan->irq); - chan->irq_enabled = 1; - } - - /* start the channel going */ - - tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); - tmp &= ~S3C2410_DMASKTRIG_STOP; - tmp |= S3C2410_DMASKTRIG_ON; - dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); - - pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp); - -#if 0 - /* the dma buffer loads should take care of clearing the AUTO - * reloading feature */ - tmp = dma_rdreg(chan, S3C2410_DMA_DCON); - tmp &= ~S3C2410_DCON_NORELOAD; - dma_wrreg(chan, S3C2410_DMA_DCON, tmp); -#endif - - s3c2410_dma_call_op(chan, S3C2410_DMAOP_START); - - dbg_showchan(chan); - - /* if we've only loaded one buffer onto the channel, then chec - * to see if we have another, and if so, try and load it so when - * the first buffer is finished, the new one will be loaded onto - * the channel */ - - if (chan->next != NULL) { - if (chan->load_state == S3C2410_DMALOAD_1LOADED) { - - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - pr_debug("%s: buff not yet loaded, no more todo\n", - __FUNCTION__); - } else { - chan->load_state = S3C2410_DMALOAD_1RUNNING; - s3c2410_dma_loadbuffer(chan, chan->next); - } - - } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { - s3c2410_dma_loadbuffer(chan, chan->next); - } - } - - - local_irq_restore(flags); - - return 0; -} - -/* s3c2410_dma_canload - * - * work out if we can queue another buffer into the DMA engine -*/ - -static int -s3c2410_dma_canload(struct s3c2410_dma_chan *chan) -{ - if (chan->load_state == S3C2410_DMALOAD_NONE || - chan->load_state == S3C2410_DMALOAD_1RUNNING) - return 1; - - return 0; -} - -/* s3c2410_dma_enqueue - * - * queue an given buffer for dma transfer. - * - * id the device driver's id information for this buffer - * data the physical address of the buffer data - * size the size of the buffer in bytes - * - * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART - * is checked, and if set, the channel is started. If this flag isn't set, - * then an error will be returned. - * - * It is possible to queue more than one DMA buffer onto a channel at - * once, and the code will deal with the re-loading of the next buffer - * when necessary. -*/ - -int s3c2410_dma_enqueue(unsigned int channel, void *id, - dma_addr_t data, int size) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - struct s3c2410_dma_buf *buf; - unsigned long flags; - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: id=%p, data=%08x, size=%d\n", - __FUNCTION__, id, (unsigned int)data, size); - - buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); - if (buf == NULL) { - pr_debug("%s: out of memory (%ld alloc)\n", - __FUNCTION__, (long)sizeof(*buf)); - return -ENOMEM; - } - - //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); - //dbg_showchan(chan); - - buf->next = NULL; - buf->data = buf->ptr = data; - buf->size = size; - buf->id = id; - buf->magic = BUF_MAGIC; - - local_irq_save(flags); - - if (chan->curr == NULL) { - /* we've got nothing loaded... */ - pr_debug("%s: buffer %p queued onto empty channel\n", - __FUNCTION__, buf); - - chan->curr = buf; - chan->end = buf; - chan->next = NULL; - } else { - pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", - chan->number, __FUNCTION__, buf); - - if (chan->end == NULL) - pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", - chan->number, __FUNCTION__, chan); - - chan->end->next = buf; - chan->end = buf; - } - - /* if necessary, update the next buffer field */ - if (chan->next == NULL) - chan->next = buf; - - /* check to see if we can load a buffer */ - if (chan->state == S3C2410_DMA_RUNNING) { - if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) { - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - printk(KERN_ERR "dma%d: loadbuffer:" - "timeout loading buffer\n", - chan->number); - dbg_showchan(chan); - local_irq_restore(flags); - return -EINVAL; - } - } - - while (s3c2410_dma_canload(chan) && chan->next != NULL) { - s3c2410_dma_loadbuffer(chan, chan->next); - } - } else if (chan->state == S3C2410_DMA_IDLE) { - if (chan->flags & S3C2410_DMAF_AUTOSTART) { - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START); - } - } - - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_enqueue); - -static inline void -s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) -{ - int magicok = (buf->magic == BUF_MAGIC); - - buf->magic = -1; - - if (magicok) { - kmem_cache_free(dma_kmem, buf); - } else { - printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf); - } -} - -/* s3c2410_dma_lastxfer - * - * called when the system is out of buffers, to ensure that the channel - * is prepared for shutdown. -*/ - -static inline void -s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) -{ -#if 0 - pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", - chan->number, chan->load_state); -#endif - - switch (chan->load_state) { - case S3C2410_DMALOAD_NONE: - break; - - case S3C2410_DMALOAD_1LOADED: - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", - chan->number, __FUNCTION__); - return; - } - break; - - case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* I belive in this case we do not have anything to do - * until the next buffer comes along, and we turn off the - * reload */ - return; - - default: - pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n", - chan->number, chan->load_state); - return; - - } - - /* hopefully this'll shut the damned thing up after the transfer... */ - dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD); -} - - -#define dmadbg2(x...) - -static irqreturn_t -s3c2410_dma_irq(int irq, void *devpw) -{ - struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw; - struct s3c2410_dma_buf *buf; - - buf = chan->curr; - - dbg_showchan(chan); - - /* modify the channel state */ - - switch (chan->load_state) { - case S3C2410_DMALOAD_1RUNNING: - /* TODO - if we are running only one buffer, we probably - * want to reload here, and then worry about the buffer - * callback */ - - chan->load_state = S3C2410_DMALOAD_NONE; - break; - - case S3C2410_DMALOAD_1LOADED: - /* iirc, we should go back to NONE loaded here, we - * had a buffer, and it was never verified as being - * loaded. - */ - - chan->load_state = S3C2410_DMALOAD_NONE; - break; - - case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* we'll worry about checking to see if another buffer is - * ready after we've called back the owner. This should - * ensure we do not wait around too long for the DMA - * engine to start the next transfer - */ - - chan->load_state = S3C2410_DMALOAD_1LOADED; - break; - - case S3C2410_DMALOAD_NONE: - printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n", - chan->number); - break; - - default: - printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n", - chan->number, chan->load_state); - break; - } - - if (buf != NULL) { - /* update the chain to make sure that if we load any more - * buffers when we call the callback function, things should - * work properly */ - - chan->curr = buf->next; - buf->next = NULL; - - if (buf->magic != BUF_MAGIC) { - printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n", - chan->number, __FUNCTION__, buf); - return IRQ_HANDLED; - } - - s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK); - - /* free resouces */ - s3c2410_dma_freebuf(buf); - } else { - } - - /* only reload if the channel is still running... our buffer done - * routine may have altered the state by requesting the dma channel - * to stop or shutdown... */ - - /* todo: check that when the channel is shut-down from inside this - * function, we cope with unsetting reload, etc */ - - if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) { - unsigned long flags; - - switch (chan->load_state) { - case S3C2410_DMALOAD_1RUNNING: - /* don't need to do anything for this state */ - break; - - case S3C2410_DMALOAD_NONE: - /* can load buffer immediately */ - break; - - case S3C2410_DMALOAD_1LOADED: - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", - chan->number, __FUNCTION__); - return IRQ_HANDLED; - } - - break; - - case S3C2410_DMALOAD_1LOADED_1RUNNING: - goto no_load; - - default: - printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n", - chan->number, chan->load_state); - return IRQ_HANDLED; - } - - local_irq_save(flags); - s3c2410_dma_loadbuffer(chan, chan->next); - local_irq_restore(flags); - } else { - s3c2410_dma_lastxfer(chan); - - /* see if we can stop this channel.. */ - if (chan->load_state == S3C2410_DMALOAD_NONE) { - pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", - chan->number, jiffies); - s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, - S3C2410_DMAOP_STOP); - } - } - - no_load: - return IRQ_HANDLED; -} - -static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); - -/* s3c2410_request_dma - * - * get control of an dma channel -*/ - -int s3c2410_dma_request(unsigned int channel, - struct s3c2410_dma_client *client, - void *dev) -{ - struct s3c2410_dma_chan *chan; - unsigned long flags; - int err; - - pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", - channel, client->name, dev); - - local_irq_save(flags); - - chan = s3c2410_dma_map_channel(channel); - if (chan == NULL) { - local_irq_restore(flags); - return -EBUSY; - } - - dbg_showchan(chan); - - chan->client = client; - chan->in_use = 1; - - if (!chan->irq_claimed) { - pr_debug("dma%d: %s : requesting irq %d\n", - channel, __FUNCTION__, chan->irq); - - chan->irq_claimed = 1; - local_irq_restore(flags); - - err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, - client->name, (void *)chan); - - local_irq_save(flags); - - if (err) { - chan->in_use = 0; - chan->irq_claimed = 0; - local_irq_restore(flags); - - printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", - client->name, chan->irq, chan->number); - return err; - } - - chan->irq_enabled = 1; - } - - local_irq_restore(flags); - - /* need to setup */ - - pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_request); +static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = { + .select = s3c2410_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2410_dma_mappings, + .map_size = ARRAY_SIZE(s3c2410_dma_mappings), +}; -/* s3c2410_dma_free - * - * release the given channel back to the system, will stop and flush - * any outstanding transfers, and ensure the channel is ready for the - * next claimant. - * - * Note, although a warning is currently printed if the freeing client - * info is not the same as the registrant's client info, the free is still - * allowed to go through. -*/ +static struct s3c24xx_dma_order __initdata s3c2410_dma_order = { + .channels = { + [DMACH_SDI] = { + .list = { + [0] = 3 | DMA_CH_VALID, + [1] = 2 | DMA_CH_VALID, + [2] = 0 | DMA_CH_VALID, + }, + }, + [DMACH_I2S_IN] = { + .list = { + [0] = 1 | DMA_CH_VALID, + [1] = 2 | DMA_CH_VALID, + }, + }, + }, +}; -int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) +static int s3c2410_dma_add(struct sys_device *sysdev) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - unsigned long flags; - - if (chan == NULL) - return -EINVAL; - - local_irq_save(flags); - - if (chan->client != client) { - printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", - channel, chan->client, client); - } - - /* sort out stopping and freeing the channel */ - - if (chan->state != S3C2410_DMA_IDLE) { - pr_debug("%s: need to stop dma channel %p\n", - __FUNCTION__, chan); - - /* possibly flush the channel */ - s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); - } - - chan->client = NULL; - chan->in_use = 0; - - if (chan->irq_claimed) - free_irq(chan->irq, (void *)chan); - - chan->irq_claimed = 0; - - if (!(channel & DMACH_LOW_LEVEL)) - dma_chan_map[channel] = NULL; - - local_irq_restore(flags); - - return 0; + s3c2410_dma_init(); + s3c24xx_dma_order_set(&s3c2410_dma_order); + return s3c24xx_dma_init_map(&s3c2410_dma_sel); } -EXPORT_SYMBOL(s3c2410_dma_free); - -static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) -{ - unsigned long flags; - unsigned long tmp; - - pr_debug("%s:\n", __FUNCTION__); - - dbg_showchan(chan); - - local_irq_save(flags); - - s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP); - - tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); - tmp |= S3C2410_DMASKTRIG_STOP; - //tmp &= ~S3C2410_DMASKTRIG_ON; - dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); - -#if 0 - /* should also clear interrupts, according to WinCE BSP */ - tmp = dma_rdreg(chan, S3C2410_DMA_DCON); - tmp |= S3C2410_DCON_NORELOAD; - dma_wrreg(chan, S3C2410_DMA_DCON, tmp); -#endif - - /* should stop do this, or should we wait for flush? */ - chan->state = S3C2410_DMA_IDLE; - chan->load_state = S3C2410_DMALOAD_NONE; - - local_irq_restore(flags); - - return 0; -} +#if defined(CONFIG_CPU_S3C2410) +static struct sysdev_driver s3c2410_dma_driver = { + .add = s3c2410_dma_add, +}; -void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan) +static int __init s3c2410_dma_drvinit(void) { - unsigned long tmp; - unsigned int timeout = 0x10000; - - while (timeout-- > 0) { - tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); - - if (!(tmp & S3C2410_DMASKTRIG_ON)) - return; - } - - pr_debug("dma%d: failed to stop?\n", chan->number); + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver); } - -/* s3c2410_dma_flush - * - * stop the channel, and remove all current and pending transfers -*/ - -static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) -{ - struct s3c2410_dma_buf *buf, *next; - unsigned long flags; - - pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number); - - dbg_showchan(chan); - - local_irq_save(flags); - - if (chan->state != S3C2410_DMA_IDLE) { - pr_debug("%s: stopping channel...\n", __FUNCTION__ ); - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); - } - - buf = chan->curr; - if (buf == NULL) - buf = chan->next; - - chan->curr = chan->next = chan->end = NULL; - - if (buf != NULL) { - for ( ; buf != NULL; buf = next) { - next = buf->next; - - pr_debug("%s: free buffer %p, next %p\n", - __FUNCTION__, buf, buf->next); - - s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT); - s3c2410_dma_freebuf(buf); - } - } - - dbg_showregs(chan); - - s3c2410_dma_waitforstop(chan); - -#if 0 - /* should also clear interrupts, according to WinCE BSP */ - { - unsigned long tmp; - - tmp = dma_rdreg(chan, S3C2410_DMA_DCON); - tmp |= S3C2410_DCON_NORELOAD; - dma_wrreg(chan, S3C2410_DMA_DCON, tmp); - } +arch_initcall(s3c2410_dma_drvinit); #endif - dbg_showregs(chan); - - local_irq_restore(flags); - - return 0; -} - -int -s3c2410_dma_started(struct s3c2410_dma_chan *chan) -{ - unsigned long flags; - - local_irq_save(flags); - - dbg_showchan(chan); - - /* if we've only loaded one buffer onto the channel, then chec - * to see if we have another, and if so, try and load it so when - * the first buffer is finished, the new one will be loaded onto - * the channel */ - - if (chan->next != NULL) { - if (chan->load_state == S3C2410_DMALOAD_1LOADED) { - - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - pr_debug("%s: buff not yet loaded, no more todo\n", - __FUNCTION__); - } else { - chan->load_state = S3C2410_DMALOAD_1RUNNING; - s3c2410_dma_loadbuffer(chan, chan->next); - } - - } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { - s3c2410_dma_loadbuffer(chan, chan->next); - } - } - - - local_irq_restore(flags); - - return 0; - -} - -int -s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - switch (op) { - case S3C2410_DMAOP_START: - return s3c2410_dma_start(chan); - - case S3C2410_DMAOP_STOP: - return s3c2410_dma_dostop(chan); - - case S3C2410_DMAOP_PAUSE: - case S3C2410_DMAOP_RESUME: - return -ENOENT; - - case S3C2410_DMAOP_FLUSH: - return s3c2410_dma_flush(chan); - - case S3C2410_DMAOP_STARTED: - return s3c2410_dma_started(chan); - - case S3C2410_DMAOP_TIMEOUT: - return 0; - - } - - return -ENOENT; /* unknown, don't bother */ -} - -EXPORT_SYMBOL(s3c2410_dma_ctrl); - -/* DMA configuration for each channel - * - * DISRCC -> source of the DMA (AHB,APB) - * DISRC -> source address of the DMA - * DIDSTC -> destination of the DMA (AHB,APD) - * DIDST -> destination address of the DMA -*/ - -/* s3c2410_dma_config - * - * xfersize: size of unit in bytes (1,2,4) - * dcon: base value of the DCONx register -*/ - -int s3c2410_dma_config(dmach_t channel, - int xferunit, - int dcon) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", - __FUNCTION__, channel, xferunit, dcon); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon); - - dcon |= chan->dcon & dma_sel.dcon_mask; - - pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon); - - switch (xferunit) { - case 1: - dcon |= S3C2410_DCON_BYTE; - break; - - case 2: - dcon |= S3C2410_DCON_HALFWORD; - break; - - case 4: - dcon |= S3C2410_DCON_WORD; - break; - - default: - pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit); - return -EINVAL; - } - - dcon |= S3C2410_DCON_HWTRIG; - dcon |= S3C2410_DCON_INTREQ; - - pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon); - - chan->dcon = dcon; - chan->xfer_unit = xferunit; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_config); - -int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); - - chan->flags = flags; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_setflags); - - -/* do we need to protect the settings of the fields from - * irq? -*/ - -int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); - - chan->op_fn = rtn; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_set_opfn); - -int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); - - chan->callback_fn = rtn; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); - -/* s3c2410_dma_devconfig - * - * configure the dma source/destination hardware type and address - * - * source: S3C2410_DMASRC_HW: source is hardware - * S3C2410_DMASRC_MEM: source is memory - * - * hwcfg: the value for xxxSTCn register, - * bit 0: 0=increment pointer, 1=leave pointer - * bit 1: 0=soucre is AHB, 1=soucre is APB - * - * devaddr: physical address of the source -*/ - -int s3c2410_dma_devconfig(int channel, - enum s3c2410_dmasrc source, - int hwcfg, - unsigned long devaddr) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", - __FUNCTION__, (int)source, hwcfg, devaddr); - - chan->source = source; - chan->dev_addr = devaddr; - - switch (source) { - case S3C2410_DMASRC_HW: - /* source is hardware */ - pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n", - __FUNCTION__, devaddr, hwcfg); - dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3); - dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr); - dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0)); - - chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST); - return 0; - - case S3C2410_DMASRC_MEM: - /* source is memory */ - pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n", - __FUNCTION__, devaddr, hwcfg); - dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0)); - dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr); - dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3); - - chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC); - return 0; - } - - printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source); - return -EINVAL; -} - -EXPORT_SYMBOL(s3c2410_dma_devconfig); - -/* s3c2410_dma_getposition - * - * returns the current transfer points for the dma source and destination -*/ - -int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - if (src != NULL) - *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); - - if (dst != NULL) - *dst = dma_rdreg(chan, S3C2410_DMA_DCDST); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_getposition); - - -/* system device class */ - -#ifdef CONFIG_PM - -static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state) -{ - struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev); - - printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); - - if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) { - /* the dma channel is still working, which is probably - * a bad thing to do over suspend/resume. We stop the - * channel and assume that the client is either going to - * retry after resume, or that it is broken. - */ - - printk(KERN_INFO "dma: stopping channel %d due to suspend\n", - cp->number); - - s3c2410_dma_dostop(cp); - } - - return 0; -} - -static int s3c2410_dma_resume(struct sys_device *dev) -{ - return 0; -} - -#else -#define s3c2410_dma_suspend NULL -#define s3c2410_dma_resume NULL -#endif /* CONFIG_PM */ - -struct sysdev_class dma_sysclass = { - set_kset_name("s3c24xx-dma"), - .suspend = s3c2410_dma_suspend, - .resume = s3c2410_dma_resume, +#if defined(CONFIG_CPU_S3C2442) +/* S3C2442 DMA contains the same selection table as the S3C2410 */ +static struct sysdev_driver s3c2442_dma_driver = { + .add = s3c2410_dma_add, }; -/* kmem cache implementation */ - -static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f) -{ - memset(p, 0, sizeof(struct s3c2410_dma_buf)); -} - -/* initialisation code */ - -static int __init s3c2410_init_dma(void) -{ - struct s3c2410_dma_chan *cp; - int channel; - int ret; - - printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n"); - - dma_base = ioremap(S3C24XX_PA_DMA, 0x200); - if (dma_base == NULL) { - printk(KERN_ERR "dma failed to remap register block\n"); - return -ENOMEM; - } - - printk("Registering sysclass\n"); - - ret = sysdev_class_register(&dma_sysclass); - if (ret != 0) { - printk(KERN_ERR "dma sysclass registration failed\n"); - goto err; - } - - dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0, - SLAB_HWCACHE_ALIGN, - s3c2410_dma_cache_ctor, NULL); - - if (dma_kmem == NULL) { - printk(KERN_ERR "dma failed to make kmem cache\n"); - ret = -ENOMEM; - goto err; - } - - for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) { - cp = &s3c2410_chans[channel]; - - memset(cp, 0, sizeof(struct s3c2410_dma_chan)); - - /* dma channel irqs are in order.. */ - cp->number = channel; - cp->irq = channel + IRQ_DMA0; - cp->regs = dma_base + (channel*0x40); - - /* point current stats somewhere */ - cp->stats = &cp->stats_store; - cp->stats_store.timeout_shortest = LONG_MAX; - - /* basic channel configuration */ - - cp->load_timeout = 1<<18; - - /* register system device */ - - cp->dev.cls = &dma_sysclass; - cp->dev.id = channel; - ret = sysdev_register(&cp->dev); - - printk("DMA channel %d at %p, irq %d\n", - cp->number, cp->regs, cp->irq); - } - - return 0; - - err: - kmem_cache_destroy(dma_kmem); - iounmap(dma_base); - dma_base = NULL; - return ret; -} - -core_initcall(s3c2410_init_dma); - -static inline int is_channel_valid(unsigned int channel) +static int __init s3c2442_dma_drvinit(void) { - return (channel & DMA_CH_VALID); + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver); } -/* s3c2410_dma_map_channel() - * - * turn the virtual channel number into a real, and un-used hardware - * channel. - * - * currently this code uses first-free channel from the specified harware - * map, not taking into account anything that the board setup code may - * have to say about the likely peripheral set to be in use. -*/ - -struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) -{ - struct s3c24xx_dma_map *ch_map; - struct s3c2410_dma_chan *dmach; - int ch; - - if (dma_sel.map == NULL || channel > dma_sel.map_size) - return NULL; - - ch_map = dma_sel.map + channel; - - for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) { - if (!is_channel_valid(ch_map->channels[ch])) - continue; - - if (s3c2410_chans[ch].in_use == 0) { - printk("mapped channel %d to %d\n", channel, ch); - break; - } - } - - if (ch >= S3C2410_DMA_CHANNELS) - return NULL; - - /* update our channel mapping */ - - dmach = &s3c2410_chans[ch]; - dma_chan_map[channel] = dmach; - - /* select the channel */ - - (dma_sel.select)(dmach, ch_map); - - return dmach; -} - -static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch) -{ - /* show the channel configuration */ - - printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name, - (is_channel_valid(map->channels[0]) ? '0' : '-'), - (is_channel_valid(map->channels[1]) ? '1' : '-'), - (is_channel_valid(map->channels[2]) ? '2' : '-'), - (is_channel_valid(map->channels[3]) ? '3' : '-')); -} - -static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) -{ - if (1) - s3c24xx_dma_show_ch(map, ch); - - return 0; -} - -int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) -{ - struct s3c24xx_dma_map *nmap; - size_t map_sz = sizeof(*nmap) * sel->map_size; - int ptr; - - nmap = kmalloc(map_sz, GFP_KERNEL); - if (nmap == NULL) - return -ENOMEM; - - memcpy(nmap, sel->map, map_sz); - memcpy(&dma_sel, sel, sizeof(*sel)); - - dma_sel.map = nmap; - - for (ptr = 0; ptr < sel->map_size; ptr++) - s3c24xx_dma_check_entry(nmap+ptr, ptr); +arch_initcall(s3c2442_dma_drvinit); +#endif - return 0; -} diff --git a/arch/arm/mach-s3c2410/dma.h b/arch/arm/mach-s3c2410/dma.h deleted file mode 100644 index 0ebfe0aab80..00000000000 --- a/arch/arm/mach-s3c2410/dma.h +++ /dev/null @@ -1,45 +0,0 @@ -/* arch/arm/mach-s3c2410/dma.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C24XX DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern struct sysdev_class dma_sysclass; -extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; - -#define DMA_CH_VALID (1<<31) - -struct s3c24xx_dma_addr { - unsigned long from; - unsigned long to; -}; - -/* struct s3c24xx_dma_map - * - * this holds the mapping information for the channel selected - * to be connected to the specified device -*/ - -struct s3c24xx_dma_map { - const char *name; - struct s3c24xx_dma_addr hw_addr; - - unsigned long channels[S3C2410_DMA_CHANNELS]; -}; - -struct s3c24xx_dma_selection { - struct s3c24xx_dma_map *map; - unsigned long map_size; - unsigned long dcon_mask; - - void (*select)(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map); -}; - -extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index f6fb215bb48..01e795d1146 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -1,9 +1,9 @@ /* linux/arch/arm/mach-s3c2410/gpio.c * - * Copyright (c) 2004-2005 Simtec Electronics + * Copyright (c) 2004-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C24XX GPIO support + * S3C2410 GPIO support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,8 +18,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - + */ #include <linux/kernel.h> #include <linux/init.h> @@ -33,156 +32,40 @@ #include <asm/arch/regs-gpio.h> -void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long mask; - unsigned long con; - unsigned long flags; - - if (pin < S3C2410_GPIO_BANKB) { - mask = 1 << S3C2410_GPIO_OFFSET(pin); - } else { - mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; - } - - switch (function) { - case S3C2410_GPIO_LEAVE: - mask = 0; - function = 0; - break; - - case S3C2410_GPIO_INPUT: - case S3C2410_GPIO_OUTPUT: - case S3C2410_GPIO_SFN2: - case S3C2410_GPIO_SFN3: - if (pin < S3C2410_GPIO_BANKB) { - function -= 1; - function &= 1; - function <<= S3C2410_GPIO_OFFSET(pin); - } else { - function &= 3; - function <<= S3C2410_GPIO_OFFSET(pin)*2; - } - } - - /* modify the specified register wwith IRQs off */ - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - con &= ~mask; - con |= function; - - __raw_writel(con, base + 0x00); - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(s3c2410_gpio_cfgpin); - -unsigned int s3c2410_gpio_getcfg(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long val = __raw_readl(base); - - if (pin < S3C2410_GPIO_BANKB) { - val >>= S3C2410_GPIO_OFFSET(pin); - val &= 1; - val += 1; - } else { - val >>= S3C2410_GPIO_OFFSET(pin)*2; - val &= 3; - } - - return val | S3C2410_GPIO_INPUT; -} - -EXPORT_SYMBOL(s3c2410_gpio_getcfg); - -void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) +int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, + unsigned int config) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); + void __iomem *reg = S3C24XX_EINFLT0; unsigned long flags; - unsigned long up; - - if (pin < S3C2410_GPIO_BANKB) - return; - - local_irq_save(flags); - - up = __raw_readl(base + 0x08); - up &= ~(1L << offs); - up |= to << offs; - __raw_writel(up, base + 0x08); + unsigned long val; - local_irq_restore(flags); -} + if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15) + return -1; -EXPORT_SYMBOL(s3c2410_gpio_pullup); + config &= 0xff; -void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - unsigned long flags; - unsigned long dat; + pin -= S3C2410_GPG8; + reg += pin & ~3; local_irq_save(flags); - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offs); - dat |= to << offs; - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(s3c2410_gpio_setpin); - -unsigned int s3c2410_gpio_getpin(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); + /* update filter width and clock source */ - return __raw_readl(base + 0x04) & (1<< offs); -} + val = __raw_readl(reg); + val &= ~(0xff << ((pin & 3) * 8)); + val |= config << ((pin & 3) * 8); + __raw_writel(val, reg); -EXPORT_SYMBOL(s3c2410_gpio_getpin); + /* update filter enable */ -unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) -{ - unsigned long flags; - unsigned long misccr; + val = __raw_readl(S3C24XX_EXTINT2); + val &= ~(1 << ((pin * 4) + 3)); + val |= on << ((pin * 4) + 3); + __raw_writel(val, S3C24XX_EXTINT2); - local_irq_save(flags); - misccr = __raw_readl(S3C24XX_MISCCR); - misccr &= ~clear; - misccr ^= change; - __raw_writel(misccr, S3C24XX_MISCCR); local_irq_restore(flags); - return misccr; -} - -EXPORT_SYMBOL(s3c2410_modify_misccr); - -int s3c2410_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15) - return -1; /* not valid interrupts */ - - if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) - return -1; /* not valid pin */ - - if (pin < S3C2410_GPF4) - return (pin - S3C2410_GPF0) + IRQ_EINT0; - - if (pin < S3C2410_GPG0) - return (pin - S3C2410_GPF4) + IRQ_EINT4; - - return (pin - S3C2410_GPG0) + IRQ_EINT8; + return 0; } -EXPORT_SYMBOL(s3c2410_gpio_getirq); +EXPORT_SYMBOL(s3c2410_gpio_irqfilter); diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index 3c0ed7871c5..53cbdaa43ac 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify @@ -17,37 +17,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * Changelog: - * - * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk> - * Fixed compile warnings - * - * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn> - * Fixed s3c_extirq_type - * - * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> - * Addition of ADC/TC demux - * - * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de> - * Fix for set_irq_type() on low EINT numbers - * - * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> - * Tidy up KF's patch and sort out new release - * - * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> - * Add support for power management controls - * - * 04-Nov-2004 Ben Dooks - * Fix standard IRQ wake for EINT0..4 and RTC - * - * 22-Feb-2005 Ben Dooks - * Fixed edge-triggering on ADC IRQ - * - * 28-Jun-2005 Ben Dooks - * Mark IRQ_LCD valid - * - * 25-Jul-2005 Ben Dooks - * Split the S3C2440 IRQ code to seperate file */ #include <linux/init.h> @@ -57,745 +26,23 @@ #include <linux/ptrace.h> #include <linux/sysdev.h> -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <asm/mach/irq.h> - -#include <asm/arch/regs-irq.h> -#include <asm/arch/regs-gpio.h> - -#include "cpu.h" -#include "pm.h" -#include "irq.h" - -/* wakeup irq control */ - -#ifdef CONFIG_PM - -/* state for IRQs over sleep */ - -/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources - * - * set bit to 1 in allow bitfield to enable the wakeup settings on it -*/ - -unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; -unsigned long s3c_irqwake_intmask = 0xffffffffL; -unsigned long s3c_irqwake_eintallow = 0x0000fff0L; -unsigned long s3c_irqwake_eintmask = 0xffffffffL; - -int -s3c_irq_wake(unsigned int irqno, unsigned int state) -{ - unsigned long irqbit = 1 << (irqno - IRQ_EINT0); - - if (!(s3c_irqwake_intallow & irqbit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_intmask |= irqbit; - else - s3c_irqwake_intmask &= ~irqbit; - - return 0; -} - -static int -s3c_irqext_wake(unsigned int irqno, unsigned int state) -{ - unsigned long bit = 1L << (irqno - EXTINT_OFF); - - if (!(s3c_irqwake_eintallow & bit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_eintmask |= bit; - else - s3c_irqwake_eintmask &= ~bit; - - return 0; -} - -#else -#define s3c_irqext_wake NULL -#define s3c_irq_wake NULL -#endif - - -static void -s3c_irq_mask(unsigned int irqno) -{ - unsigned long mask; - - irqno -= IRQ_EINT0; - - mask = __raw_readl(S3C2410_INTMSK); - mask |= 1UL << irqno; - __raw_writel(mask, S3C2410_INTMSK); -} - -static inline void -s3c_irq_ack(unsigned int irqno) -{ - unsigned long bitval = 1UL << (irqno - IRQ_EINT0); - - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static inline void -s3c_irq_maskack(unsigned int irqno) -{ - unsigned long bitval = 1UL << (irqno - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); - - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - - -static void -s3c_irq_unmask(unsigned int irqno) -{ - unsigned long mask; - - if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23) - irqdbf2("s3c_irq_unmask %d\n", irqno); - - irqno -= IRQ_EINT0; - - mask = __raw_readl(S3C2410_INTMSK); - mask &= ~(1UL << irqno); - __raw_writel(mask, S3C2410_INTMSK); -} - -struct irq_chip s3c_irq_level_chip = { - .name = "s3c-level", - .ack = s3c_irq_maskack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake -}; - -static struct irq_chip s3c_irq_chip = { - .name = "s3c", - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake -}; - -static void -s3c_irqext_mask(unsigned int irqno) -{ - unsigned long mask; - - irqno -= EXTINT_OFF; - - mask = __raw_readl(S3C24XX_EINTMASK); - mask |= ( 1UL << irqno); - __raw_writel(mask, S3C24XX_EINTMASK); -} - -static void -s3c_irqext_ack(unsigned int irqno) -{ - unsigned long req; - unsigned long bit; - unsigned long mask; +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> - bit = 1UL << (irqno - EXTINT_OFF); - - mask = __raw_readl(S3C24XX_EINTMASK); - - __raw_writel(bit, S3C24XX_EINTPEND); - - req = __raw_readl(S3C24XX_EINTPEND); - req &= ~mask; - - /* not sure if we should be acking the parent irq... */ - - if (irqno <= IRQ_EINT7 ) { - if ((req & 0xf0) == 0) - s3c_irq_ack(IRQ_EINT4t7); - } else { - if ((req >> 8) == 0) - s3c_irq_ack(IRQ_EINT8t23); - } -} - -static void -s3c_irqext_unmask(unsigned int irqno) +static int s3c2410_irq_add(struct sys_device *sysdev) { - unsigned long mask; - - irqno -= EXTINT_OFF; - - mask = __raw_readl(S3C24XX_EINTMASK); - mask &= ~( 1UL << irqno); - __raw_writel(mask, S3C24XX_EINTMASK); -} - -int -s3c_irqext_type(unsigned int irq, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - unsigned long newvalue = 0, value; - - if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3)) - { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (irq - IRQ_EINT0) * 2; - extint_offset = (irq - IRQ_EINT0) * 4; - } - else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7)) - { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (irq - (EXTINT_OFF)) * 2; - extint_offset = (irq - (EXTINT_OFF)) * 4; - } - else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15)) - { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT1; - gpcon_offset = (irq - IRQ_EINT8) * 2; - extint_offset = (irq - IRQ_EINT8) * 4; - } - else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23)) - { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT2; - gpcon_offset = (irq - IRQ_EINT8) * 2; - extint_offset = (irq - IRQ_EINT16) * 4; - } else - return -1; - - /* Set the GPIO to external interrupt mode */ - value = __raw_readl(gpcon_reg); - value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); - __raw_writel(value, gpcon_reg); - - /* Set the external interrupt to pointed trigger type */ - switch (type) - { - case IRQT_NOEDGE: - printk(KERN_WARNING "No edge setting!\n"); - break; - - case IRQT_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQT_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQT_BOTHEDGE: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQT_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQT_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -1; - } - - value = __raw_readl(extint_reg); - value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); - __raw_writel(value, extint_reg); - return 0; } -static struct irq_chip s3c_irqext_chip = { - .name = "s3c-ext", - .mask = s3c_irqext_mask, - .unmask = s3c_irqext_unmask, - .ack = s3c_irqext_ack, - .set_type = s3c_irqext_type, - .set_wake = s3c_irqext_wake -}; - -static struct irq_chip s3c_irq_eint0t4 = { - .name = "s3c-ext0", - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake, - .set_type = s3c_irqext_type, -}; - -/* mask values for the parent registers for each of the interrupt types */ - -#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0)) -#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0)) -#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0)) -#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0)) - - -/* UART0 */ - -static void -s3c_irq_uart0_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_UART0, 7); -} - -static void -s3c_irq_uart0_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_UART0); -} - -static void -s3c_irq_uart0_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_UART0, 7); -} - -static struct irq_chip s3c_irq_uart0 = { - .name = "s3c-uart0", - .mask = s3c_irq_uart0_mask, - .unmask = s3c_irq_uart0_unmask, - .ack = s3c_irq_uart0_ack, -}; - -/* UART1 */ - -static void -s3c_irq_uart1_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3); -} - -static void -s3c_irq_uart1_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_UART1); -} - -static void -s3c_irq_uart1_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3); -} - -static struct irq_chip s3c_irq_uart1 = { - .name = "s3c-uart1", - .mask = s3c_irq_uart1_mask, - .unmask = s3c_irq_uart1_unmask, - .ack = s3c_irq_uart1_ack, -}; - -/* UART2 */ - -static void -s3c_irq_uart2_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6); -} - -static void -s3c_irq_uart2_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_UART2); -} - -static void -s3c_irq_uart2_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6); -} - -static struct irq_chip s3c_irq_uart2 = { - .name = "s3c-uart2", - .mask = s3c_irq_uart2_mask, - .unmask = s3c_irq_uart2_unmask, - .ack = s3c_irq_uart2_ack, -}; - -/* ADC and Touchscreen */ - -static void -s3c_irq_adc_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9); -} - -static void -s3c_irq_adc_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT); -} - -static void -s3c_irq_adc_ack(unsigned int irqno) -{ - s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9); -} - -static struct irq_chip s3c_irq_adc = { - .name = "s3c-adc", - .mask = s3c_irq_adc_mask, - .unmask = s3c_irq_adc_unmask, - .ack = s3c_irq_adc_ack, -}; - -/* irq demux for adc */ -static void s3c_irq_demux_adc(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - unsigned int offset = 9; - struct irq_desc *mydesc; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= offset; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - mydesc = irq_desc + IRQ_TC; - desc_handle_irq(IRQ_TC, mydesc); - } - if (subsrc & 2) { - mydesc = irq_desc + IRQ_ADC; - desc_handle_irq(IRQ_ADC, mydesc); - } - } -} - -static void s3c_irq_demux_uart(unsigned int start) -{ - unsigned int subsrc, submsk; - unsigned int offset = start - IRQ_S3CUART_RX0; - struct irq_desc *desc; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n", - start, offset, subsrc, submsk); - - subsrc &= ~submsk; - subsrc >>= offset; - subsrc &= 7; - - if (subsrc != 0) { - desc = irq_desc + start; - - if (subsrc & 1) - desc_handle_irq(start, desc); - - desc++; - - if (subsrc & 2) - desc_handle_irq(start+1, desc); - - desc++; - - if (subsrc & 4) - desc_handle_irq(start+2, desc); - } -} - -/* uart demux entry points */ - -static void -s3c_irq_demux_uart0(unsigned int irq, - struct irq_desc *desc) -{ - irq = irq; - s3c_irq_demux_uart(IRQ_S3CUART_RX0); -} - -static void -s3c_irq_demux_uart1(unsigned int irq, - struct irq_desc *desc) -{ - irq = irq; - s3c_irq_demux_uart(IRQ_S3CUART_RX1); -} - -static void -s3c_irq_demux_uart2(unsigned int irq, - struct irq_desc *desc) -{ - irq = irq; - s3c_irq_demux_uart(IRQ_S3CUART_RX2); -} - -static void -s3c_irq_demux_extint8(unsigned int irq, - struct irq_desc *desc) -{ - unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); - unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); - - eintpnd &= ~eintmsk; - eintpnd &= ~0xff; /* ignore lower irqs */ - - /* we may as well handle all the pending IRQs here */ - - while (eintpnd) { - irq = __ffs(eintpnd); - eintpnd &= ~(1<<irq); - - irq += (IRQ_EINT4 - 4); - desc_handle_irq(irq, irq_desc + irq); - } - -} - -static void -s3c_irq_demux_extint4t7(unsigned int irq, - struct irq_desc *desc) -{ - unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); - unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); - - eintpnd &= ~eintmsk; - eintpnd &= 0xff; /* only lower irqs */ - - /* we may as well handle all the pending IRQs here */ - - while (eintpnd) { - irq = __ffs(eintpnd); - eintpnd &= ~(1<<irq); - - irq += (IRQ_EINT4 - 4); - - desc_handle_irq(irq, irq_desc + irq); - } -} - -#ifdef CONFIG_PM - -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2410_INTMSK), - SAVE_ITEM(S3C2410_INTSUBMSK), +static struct sysdev_driver s3c2410_irq_driver = { + .add = s3c2410_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; -/* the extint values move between the s3c2410/s3c2440 and the s3c2412 - * so we use an array to hold them, and to calculate the address of - * the register at run-time -*/ - -static unsigned long save_extint[3]; -static unsigned long save_eintflt[4]; -static unsigned long save_eintmask; - -int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +static int s3c2410_irq_init(void) { - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); - - s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - save_eintmask = __raw_readl(S3C24XX_EINTMASK); - - return 0; + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver); } -int s3c24xx_irq_resume(struct sys_device *dev) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); - - s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); - __raw_writel(save_eintmask, S3C24XX_EINTMASK); - - return 0; -} - -#else -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL -#endif - -/* s3c24xx_init_irq - * - * Initialise S3C2410 IRQ system -*/ - -void __init s3c24xx_init_irq(void) -{ - unsigned long pend; - unsigned long last; - int irqno; - int i; - - irqdbf("s3c2410_init_irq: clearing interrupt status flags\n"); - - /* first, clear all interrupts pending... */ - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C24XX_EINTPEND); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, S3C24XX_EINTPEND); - printk("irq: clearing pending ext status %08x\n", (int)pend); - last = pend; - } - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2410_INTPND); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, S3C2410_SRCPND); - __raw_writel(pend, S3C2410_INTPND); - printk("irq: clearing pending status %08x\n", (int)pend); - last = pend; - } - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2410_SUBSRCPND); - - if (pend == 0 || pend == last) - break; - - printk("irq: clearing subpending status %08x\n", (int)pend); - __raw_writel(pend, S3C2410_SUBSRCPND); - last = pend; - } - - /* register the main interrupts */ - - irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n"); - - for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) { - /* set all the s3c2410 internal irqs */ - - switch (irqno) { - /* deal with the special IRQs (cascaded) */ - - case IRQ_EINT4t7: - case IRQ_EINT8t23: - case IRQ_UART0: - case IRQ_UART1: - case IRQ_UART2: - case IRQ_ADCPARENT: - set_irq_chip(irqno, &s3c_irq_level_chip); - set_irq_handler(irqno, handle_level_irq); - break; - - case IRQ_RESERVED6: - case IRQ_RESERVED24: - /* no IRQ here */ - break; - - default: - //irqdbf("registering irq %d (s3c irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_chip); - set_irq_handler(irqno, handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - } - - /* setup the cascade irq handlers */ - - set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7); - set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8); - - set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); - set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); - set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2); - set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc); - - /* external interrupts */ - - for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - irqdbf("registering irq %d (ext int)\n", irqno); - set_irq_chip(irqno, &s3c_irq_eint0t4); - set_irq_handler(irqno, handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) { - irqdbf("registering irq %d (extended s3c irq)\n", irqno); - set_irq_chip(irqno, &s3c_irqext_chip); - set_irq_handler(irqno, handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* register the uart interrupts */ - - irqdbf("s3c2410: registering external interrupts\n"); - - for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) { - irqdbf("registering irq %d (s3c uart0 irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_uart0); - set_irq_handler(irqno, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) { - irqdbf("registering irq %d (s3c uart1 irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_uart1); - set_irq_handler(irqno, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) { - irqdbf("registering irq %d (s3c uart2 irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_uart2); - set_irq_handler(irqno, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) { - irqdbf("registering irq %d (s3c adc irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_adc); - set_irq_handler(irqno, handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - irqdbf("s3c2410: registered interrupt handlers\n"); -} +arch_initcall(s3c2410_irq_init); diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h deleted file mode 100644 index e5913da3b91..00000000000 --- a/arch/arm/mach-s3c2410/irq.h +++ /dev/null @@ -1,107 +0,0 @@ -/* arch/arm/mach-s3c2410/irq.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C24XX CPU IRQ support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define irqdbf(x...) -#define irqdbf2(x...) - -#define EXTINT_OFF (IRQ_EINT4 - 4) - -extern struct irq_chip s3c_irq_level_chip; - -static inline void -s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, - int subcheck) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); - - /* check to see if we need to mask the parent IRQ */ - - if ((submask & subcheck) == subcheck) { - __raw_writel(mask | parentbit, S3C2410_INTMSK); - } - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - -} - -static inline void -s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); - mask &= ~parentbit; - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - __raw_writel(mask, S3C2410_INTMSK); -} - - -static inline void -s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - s3c_irqsub_mask(irqno, parentmask, group); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -static inline void -s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -/* exported for use in arch/arm/mach-s3c2410 */ - -#ifdef CONFIG_PM -extern int s3c_irq_wake(unsigned int irqno, unsigned int state); -#else -#define s3c_irq_wake NULL -#endif - -extern int s3c_irqext_type(unsigned int irq, unsigned int type); diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 817e2c68441..72f2cc4fcd0 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -1,4 +1,4 @@ -/*********************************************************************** +/* linux/arch/arm/mach-s3c2410/mach-amlm5900.c * * linux/arch/arm/mach-s3c2410/mach-amlm5900.c * @@ -35,7 +35,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/proc_fs.h> - +#include <linux/serial_core.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -52,8 +52,8 @@ #include <asm/arch/regs-lcd.h> #include <asm/arch/regs-gpio.h> -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> #ifdef CONFIG_MTD_PARTITIONS @@ -113,12 +113,6 @@ static struct platform_device amlm5900_device_nor = { #endif static struct map_desc amlm5900_iodesc[] __initdata = { - { - .virtual = (u32)S3C24XX_VA_SPI, - .pfn = __phys_to_pfn(S3C2410_PA_SPI), - .length = SZ_1M, - .type = MT_DEVICE - } }; #define UCON S3C2410_UCON_DEFAULT diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c deleted file mode 100644 index 0fad0c2fe07..00000000000 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ /dev/null @@ -1,325 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/mach-anubis.c - * - * Copyright (c) 2003-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/arch/anubis-map.h> -#include <asm/arch/anubis-irq.h> -#include <asm/arch/anubis-cpld.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-lcd.h> -#include <asm/arch/nand.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include "clock.h" -#include "devs.h" -#include "cpu.h" - -#define COPYRIGHT ", (c) 2005 Simtec Electronics" - -static struct map_desc anubis_iodesc[] __initdata = { - /* ISA IO areas */ - - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(0x0), - .length = SZ_4M, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(0x0), - .length = SZ_4M, - .type = MT_DEVICE, - }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - - /* CPLD control registers */ - - { - .virtual = (u32)ANUBIS_VA_CTRL1, - .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (u32)ANUBIS_VA_CTRL2, - .pfn = __phys_to_pfn(ANUBIS_PA_CTRL2), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - - -static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clocks = anubis_serial_clocks, - .clocks_size = ARRAY_SIZE(anubis_serial_clocks), - }, - [1] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clocks = anubis_serial_clocks, - .clocks_size = ARRAY_SIZE(anubis_serial_clocks), - }, -}; - -/* NAND Flash on Anubis board */ - -static int external_map[] = { 2 }; -static int chip0_map[] = { 0 }; -static int chip1_map[] = { 1 }; - -static struct mtd_partition anubis_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_16K, - .offset = SZ_16K, - }, - [2] = { - .name = "user1", - .offset = SZ_4M, - .size = SZ_32M - SZ_4M, - }, - [3] = { - .name = "user2", - .offset = SZ_32M, - .size = MTDPART_SIZ_FULL, - } -}; - -/* the Anubis has 3 selectable slots for nand-flash, the two - * on-board chip areas, as well as the external slot. - * - * Note, there is no current hot-plug support for the External - * socket. -*/ - -static struct s3c2410_nand_set anubis_nand_sets[] = { - [1] = { - .name = "External", - .nr_chips = 1, - .nr_map = external_map, - .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), - .partitions = anubis_default_nand_part, - }, - [0] = { - .name = "chip0", - .nr_chips = 1, - .nr_map = chip0_map, - .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), - .partitions = anubis_default_nand_part, - }, - [2] = { - .name = "chip1", - .nr_chips = 1, - .nr_map = chip1_map, - .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), - .partitions = anubis_default_nand_part, - }, -}; - -static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) -{ - unsigned int tmp; - - slot = set->nr_map[slot] & 3; - - pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n", - slot, set, set->nr_map); - - tmp = __raw_readb(ANUBIS_VA_CTRL1); - tmp &= ~ANUBIS_CTRL1_NANDSEL; - tmp |= slot; - - pr_debug("anubis_nand: ctrl1 now %02x\n", tmp); - - __raw_writeb(tmp, ANUBIS_VA_CTRL1); -} - -static struct s3c2410_platform_nand anubis_nand_info = { - .tacls = 25, - .twrph0 = 55, - .twrph1 = 40, - .nr_sets = ARRAY_SIZE(anubis_nand_sets), - .sets = anubis_nand_sets, - .select_chip = anubis_nand_select, -}; - -/* IDE channels */ - -static struct resource anubis_ide0_resource[] = { - { - .start = S3C2410_CS3, - .end = S3C2410_CS3 + (8*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = S3C2410_CS3 + (1<<26), - .end = S3C2410_CS3 + (1<<26) + (8*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_IDE0, - .end = IRQ_IDE0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device anubis_device_ide0 = { - .name = "simtec-ide", - .id = 0, - .num_resources = ARRAY_SIZE(anubis_ide0_resource), - .resource = anubis_ide0_resource, -}; - -static struct resource anubis_ide1_resource[] = { - { - .start = S3C2410_CS4, - .end = S3C2410_CS4 + (8*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = S3C2410_CS4 + (1<<26), - .end = S3C2410_CS4 + (1<<26) + (8*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_IDE0, - .end = IRQ_IDE0, - .flags = IORESOURCE_IRQ, - }, -}; - - -static struct platform_device anubis_device_ide1 = { - .name = "simtec-ide", - .id = 1, - .num_resources = ARRAY_SIZE(anubis_ide1_resource), - .resource = anubis_ide1_resource, -}; - -/* Standard Anubis devices */ - -static struct platform_device *anubis_devices[] __initdata = { - &s3c_device_usb, - &s3c_device_wdt, - &s3c_device_adc, - &s3c_device_i2c, - &s3c_device_rtc, - &s3c_device_nand, - &anubis_device_ide0, - &anubis_device_ide1, -}; - -static struct clk *anubis_clocks[] = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - -static struct s3c24xx_board anubis_board __initdata = { - .devices = anubis_devices, - .devices_count = ARRAY_SIZE(anubis_devices), - .clocks = anubis_clocks, - .clocks_count = ARRAY_SIZE(anubis_clocks), -}; - -static void __init anubis_map_io(void) -{ - /* initialise the clocks */ - - s3c24xx_dclk0.parent = NULL; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = NULL; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c_device_nand.dev.platform_data = &anubis_nand_info; - - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); - s3c24xx_init_clocks(0); - s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); - s3c24xx_set_board(&anubis_board); - - /* ensure that the GPIO is setup */ - s3c2410_gpio_setpin(S3C2410_GPA0, 1); -} - -MACHINE_START(ANUBIS, "Simtec-Anubis") - /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C2410_SDRAM_PA + 0x100, - .map_io = anubis_map_io, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index b8b76757ec5..7b81296427e 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -50,9 +50,9 @@ #include <linux/serial_8250.h> -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> #include "usb-simtec.h" #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics" diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 15b625eae49..d052ab2d937 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -25,23 +25,24 @@ #include <asm/mach/irq.h> #include <asm/hardware.h> -#include <asm/hardware/iomd.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/mach-types.h> - #include <asm/arch/regs-serial.h> #include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-clock.h> #include <asm/arch/h1940.h> #include <asm/arch/h1940-latch.h> #include <asm/arch/fb.h> +#include <asm/arch/udc.h> -#include "clock.h" -#include "devs.h" -#include "cpu.h" -#include "pm.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> static struct map_desc h1940_iodesc[] __initdata = { [0] = { @@ -102,6 +103,32 @@ void h1940_latch_control(unsigned int clear, unsigned int set) EXPORT_SYMBOL_GPL(h1940_latch_control); +static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) +{ + printk(KERN_DEBUG "udc: pullup(%d)\n",cmd); + + switch (cmd) + { + case S3C2410_UDC_P_ENABLE : + h1940_latch_control(0, H1940_LATCH_USB_DP); + break; + case S3C2410_UDC_P_DISABLE : + h1940_latch_control(H1940_LATCH_USB_DP, 0); + break; + case S3C2410_UDC_P_RESET : + break; + default: + break; + } +} + +static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { + .udc_command = h1940_udc_pullup, + .vbus_pin = S3C2410_GPG5, + .vbus_pin_inverted = 1, +}; + + /** * Set lcd on or off @@ -146,12 +173,19 @@ static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = { .bpp= {16,16,16}, }; +static struct platform_device s3c_device_leds = { + .name = "h1940-leds", + .id = -1, +}; + static struct platform_device *h1940_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c, &s3c_device_iis, + &s3c_device_usbgadget, + &s3c_device_leds, }; static struct s3c24xx_board h1940_board __initdata = { @@ -168,7 +202,9 @@ static void __init h1940_map_io(void) /* setup PM */ +#ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); +#endif s3c2410_pm_init(); } @@ -179,7 +215,23 @@ static void __init h1940_init_irq(void) static void __init h1940_init(void) { + u32 tmp; + s3c24xx_fb_set_platdata(&h1940_lcdcfg); + s3c24xx_udc_set_platdata(&h1940_udc_cfg); + + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ + + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); + + tmp = ( + 0x78 << S3C2410_PLLCON_MDIVSHIFT) + | (0x02 << S3C2410_PLLCON_PDIVSHIFT) + | (0x03 << S3C2410_PLLCON_SDIVSHIFT); + writel(tmp, S3C2410_UPLLCON); } MACHINE_START(H1940, "IPAQ-H1940") @@ -189,6 +241,6 @@ MACHINE_START(H1940, "IPAQ-H1940") .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = h1940_map_io, .init_irq = h1940_init_irq, - .init_machine = h1940_init, + .init_machine = h1940_init, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 0411e9adb54..261aa4cc077 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -29,7 +29,6 @@ #include <asm/mach/irq.h> #include <asm/hardware.h> -#include <asm/hardware/iomd.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -38,10 +37,10 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/iic.h> -#include "s3c2410.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> static struct map_desc n30_iodesc[] __initdata = { /* nothing here yet */ diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c deleted file mode 100644 index d6dfdad8c90..00000000000 --- a/arch/arm/mach-s3c2410/mach-nexcoder.c +++ /dev/null @@ -1,158 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/mach-nexcoder.c - * - * Copyright (c) 2004 Nex Vision - * Guillaume GOURAT <guillaume.gourat@nexvision.tv> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 15-10-2004 GG Created initial version - * 12-03-2005 BJD Updated for release - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <linux/mtd/map.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/setup.h> -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -//#include <asm/debug-ll.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-serial.h> - -#include "s3c2410.h" -#include "s3c2440.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" - -static struct map_desc nexcoder_iodesc[] __initdata = { - /* nothing here yet */ -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -/* NOR Flash on NexVision NexCoder 2440 board */ - -static struct resource nexcoder_nor_resource[] = { - [0] = { - .start = S3C2410_CS0, - .end = S3C2410_CS0 + (8*1024*1024) - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct map_info nexcoder_nor_map = { - .bankwidth = 2, -}; - -static struct platform_device nexcoder_device_nor = { - .name = "mtd-flash", - .id = -1, - .num_resources = ARRAY_SIZE(nexcoder_nor_resource), - .resource = nexcoder_nor_resource, - .dev = - { - .platform_data = &nexcoder_nor_map, - } -}; - -/* Standard Nexcoder devices */ - -static struct platform_device *nexcoder_devices[] __initdata = { - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c, - &s3c_device_iis, - &s3c_device_rtc, - &s3c_device_camif, - &s3c_device_spi0, - &s3c_device_spi1, - &nexcoder_device_nor, -}; - -static struct s3c24xx_board nexcoder_board __initdata = { - .devices = nexcoder_devices, - .devices_count = ARRAY_SIZE(nexcoder_devices), -}; - - -static void __init nexcoder_sensorboard_init(void) -{ - // Initialize SCCB bus - s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL - s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP); - s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA - s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP); - - // Power up the sensor board - s3c2410_gpio_setpin(S3C2410_GPF1, 1); - s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN - s3c2410_gpio_setpin(S3C2410_GPF2, 0); - s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN -} - -static void __init nexcoder_map_io(void) -{ - s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); - s3c24xx_init_clocks(0); - s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); - s3c24xx_set_board(&nexcoder_board); - nexcoder_sensorboard_init(); -} - - -MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") - /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C2410_SDRAM_PA + 0x100, - .map_io = nexcoder_map_io, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c deleted file mode 100644 index 37b40850c9b..00000000000 --- a/arch/arm/mach-s3c2410/mach-osiris.c +++ /dev/null @@ -1,303 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/mach-osiris.c - * - * Copyright (c) 2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial_core.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/arch/osiris-map.h> -#include <asm/arch/osiris-cpld.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-lcd.h> -#include <asm/arch/nand.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include "clock.h" -#include "devs.h" -#include "cpu.h" - -/* onboard perihpheral map */ - -static struct map_desc osiris_iodesc[] __initdata = { - /* ISA IO areas (may be over-written later) */ - - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS5), - .length = SZ_16M, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS5), - .length = SZ_16M, - .type = MT_DEVICE, - }, - - /* CPLD control registers */ - - { - .virtual = (u32)OSIRIS_VA_CTRL1, - .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (u32)OSIRIS_VA_CTRL2, - .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - -static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), - } -}; - -/* NAND Flash on Osiris board */ - -static int external_map[] = { 2 }; -static int chip0_map[] = { 0 }; -static int chip1_map[] = { 1 }; - -static struct mtd_partition osiris_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_16K, - .offset = SZ_16K, - }, - [2] = { - .name = "user1", - .offset = SZ_4M, - .size = SZ_32M - SZ_4M, - }, - [3] = { - .name = "user2", - .offset = SZ_32M, - .size = MTDPART_SIZ_FULL, - } -}; - -/* the Osiris has 3 selectable slots for nand-flash, the two - * on-board chip areas, as well as the external slot. - * - * Note, there is no current hot-plug support for the External - * socket. -*/ - -static struct s3c2410_nand_set osiris_nand_sets[] = { - [1] = { - .name = "External", - .nr_chips = 1, - .nr_map = external_map, - .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), - .partitions = osiris_default_nand_part, - }, - [0] = { - .name = "chip0", - .nr_chips = 1, - .nr_map = chip0_map, - .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), - .partitions = osiris_default_nand_part, - }, - [2] = { - .name = "chip1", - .nr_chips = 1, - .nr_map = chip1_map, - .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), - .partitions = osiris_default_nand_part, - }, -}; - -static void osiris_nand_select(struct s3c2410_nand_set *set, int slot) -{ - unsigned int tmp; - - slot = set->nr_map[slot] & 3; - - pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n", - slot, set, set->nr_map); - - tmp = __raw_readb(OSIRIS_VA_CTRL1); - tmp &= ~OSIRIS_CTRL1_NANDSEL; - tmp |= slot; - - pr_debug("osiris_nand: ctrl1 now %02x\n", tmp); - - __raw_writeb(tmp, OSIRIS_VA_CTRL1); -} - -static struct s3c2410_platform_nand osiris_nand_info = { - .tacls = 25, - .twrph0 = 60, - .twrph1 = 60, - .nr_sets = ARRAY_SIZE(osiris_nand_sets), - .sets = osiris_nand_sets, - .select_chip = osiris_nand_select, -}; - -/* PCMCIA control and configuration */ - -static struct resource osiris_pcmcia_resource[] = { - [0] = { - .start = 0x0f000000, - .end = 0x0f100000, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x0c000000, - .end = 0x0c100000, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device osiris_pcmcia = { - .name = "osiris-pcmcia", - .id = -1, - .num_resources = ARRAY_SIZE(osiris_pcmcia_resource), - .resource = osiris_pcmcia_resource, -}; - -/* Standard Osiris devices */ - -static struct platform_device *osiris_devices[] __initdata = { - &s3c_device_i2c, - &s3c_device_nand, - &osiris_pcmcia, -}; - -static struct clk *osiris_clocks[] = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - -static struct s3c24xx_board osiris_board __initdata = { - .devices = osiris_devices, - .devices_count = ARRAY_SIZE(osiris_devices), - .clocks = osiris_clocks, - .clocks_count = ARRAY_SIZE(osiris_clocks), -}; - -static void __init osiris_map_io(void) -{ - unsigned long flags; - - /* initialise the clocks */ - - s3c24xx_dclk0.parent = NULL; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = NULL; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c_device_nand.dev.platform_data = &osiris_nand_info; - - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); - s3c24xx_init_clocks(0); - s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); - s3c24xx_set_board(&osiris_board); - - /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */ - - local_irq_save(flags); - __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON); - local_irq_restore(flags); - - /* write-protect line to the NAND */ - s3c2410_gpio_setpin(S3C2410_GPA0, 1); -} - -MACHINE_START(OSIRIS, "Simtec-OSIRIS") - /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C2410_SDRAM_PA + 0x100, - .map_io = osiris_map_io, - .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 2c738b375e4..c78ab75b44f 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -32,10 +32,10 @@ #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> -#include "s3c2410.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> static struct map_desc otom11_iodesc[] __initdata = { /* Device area */ diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c new file mode 100644 index 00000000000..c6a41593de2 --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -0,0 +1,448 @@ +/* linux/arch/arm/mach-s3c2410/mach-qt2410.c + * + * Copyright (C) 2006 by OpenMoko, Inc. + * Author: Harald Welte <laforge@openmoko.org> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/mmc/protocol.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/regs-gpio.h> +#include <asm/arch/leds-gpio.h> +#include <asm/arch/regs-serial.h> +#include <asm/arch/fb.h> +#include <asm/arch/nand.h> +#include <asm/arch/udc.h> +#include <asm/arch/spi.h> +#include <asm/arch/spi-gpio.h> + +#include <asm/plat-s3c24xx/common-smdk.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> + +static struct map_desc qt2410_iodesc[] __initdata = { + { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE } +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg smdk2410_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + +/* LCD driver info */ + +/* Configuration for 640x480 SHARP LQ080V3DG01 */ +static struct s3c2410fb_mach_info qt2410_biglcd_cfg __initdata = { + .regs = { + + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | + S3C2410_LCDCON1_TFT | + S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */ + + .lcdcon2 = S3C2410_LCDCON2_VBPD(18) | /* 19 */ + S3C2410_LCDCON2_LINEVAL(479) | + S3C2410_LCDCON2_VFPD(10) | /* 11 */ + S3C2410_LCDCON2_VSPW(14), /* 15 */ + + .lcdcon3 = S3C2410_LCDCON3_HBPD(43) | /* 44 */ + S3C2410_LCDCON3_HOZVAL(639) | /* 640 */ + S3C2410_LCDCON3_HFPD(115), /* 116 */ + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | + S3C2410_LCDCON4_HSPW(95), /* 96 */ + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, + + .lpcsel = ((0xCE6) & ~7) | 1<<4, + + .width = 640, + .height = 480, + + .xres = { + .min = 640, + .max = 640, + .defval = 640, + }, + + .yres = { + .min = 480, + .max = 480, + .defval = 480, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + +/* Configuration for 480x640 toppoly TD028TTEC1 */ +static struct s3c2410fb_mach_info qt2410_prodlcd_cfg __initdata = { + .regs = { + + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | + S3C2410_LCDCON1_TFT | + S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */ + + .lcdcon2 = S3C2410_LCDCON2_VBPD(1) | /* 2 */ + S3C2410_LCDCON2_LINEVAL(639) |/* 640 */ + S3C2410_LCDCON2_VFPD(3) | /* 4 */ + S3C2410_LCDCON2_VSPW(1), /* 2 */ + + .lcdcon3 = S3C2410_LCDCON3_HBPD(7) | /* 8 */ + S3C2410_LCDCON3_HOZVAL(479) | /* 479 */ + S3C2410_LCDCON3_HFPD(23), /* 24 */ + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | + S3C2410_LCDCON4_HSPW(7), /* 8 */ + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, + + .lpcsel = ((0xCE6) & ~7) | 1<<4, + + .width = 480, + .height = 640, + + .xres = { + .min = 480, + .max = 480, + .defval = 480, + }, + + .yres = { + .min = 640, + .max = 640, + .defval = 640, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + +/* Config for 240x320 LCD */ +static struct s3c2410fb_mach_info qt2410_lcd_cfg __initdata = { + .regs = { + + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | + S3C2410_LCDCON1_TFT | + S3C2410_LCDCON1_CLKVAL(0x04), + + .lcdcon2 = S3C2410_LCDCON2_VBPD(1) | + S3C2410_LCDCON2_LINEVAL(319) | + S3C2410_LCDCON2_VFPD(6) | + S3C2410_LCDCON2_VSPW(3), + + .lcdcon3 = S3C2410_LCDCON3_HBPD(12) | + S3C2410_LCDCON3_HOZVAL(239) | + S3C2410_LCDCON3_HFPD(7), + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | + S3C2410_LCDCON4_HSPW(3), + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, + + .lpcsel = ((0xCE6) & ~7) | 1<<4, + + .width = 240, + .height = 320, + + .xres = { + .min = 240, + .max = 240, + .defval = 240, + }, + + .yres = { + .min = 320, + .max = 320, + .defval = 320, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + +/* CS8900 */ + +static struct resource qt2410_cs89x0_resources[] = { + [0] = { + .start = 0x19000000, + .end = 0x19000000 + 16, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EINT9, + .end = IRQ_EINT9, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device qt2410_cs89x0 = { + .name = "cirrus-cs89x0", + .num_resources = ARRAY_SIZE(qt2410_cs89x0_resources), + .resource = qt2410_cs89x0_resources, +}; + +/* LED */ + +static struct s3c24xx_led_platdata qt2410_pdata_led = { + .gpio = S3C2410_GPB0, + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .name = "led", + .def_trigger = "timer", +}; + +static struct platform_device qt2410_led = { + .name = "s3c24xx_led", + .id = 0, + .dev = { + .platform_data = &qt2410_pdata_led, + }, +}; + +/* SPI */ + +static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) +{ + switch (cs) { + case BITBANG_CS_ACTIVE: + s3c2410_gpio_setpin(S3C2410_GPB5, 0); + break; + case BITBANG_CS_INACTIVE: + s3c2410_gpio_setpin(S3C2410_GPB5, 1); + break; + } +} + +static struct s3c2410_spigpio_info spi_gpio_cfg = { + .pin_clk = S3C2410_GPG7, + .pin_mosi = S3C2410_GPG6, + .pin_miso = S3C2410_GPG5, + .chip_select = &spi_gpio_cs, +}; + + +static struct platform_device qt2410_spi = { + .name = "s3c24xx-spi-gpio", + .id = 1, + .dev = { + .platform_data = &spi_gpio_cfg, + }, +}; + +/* Board devices */ + +static struct platform_device *qt2410_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_iis, + &s3c_device_sdi, + &s3c_device_usbgadget, + &qt2410_spi, + &qt2410_cs89x0, + &qt2410_led, +}; + +static struct s3c24xx_board qt2410_board __initdata = { + .devices = qt2410_devices, + .devices_count = ARRAY_SIZE(qt2410_devices) +}; + +static struct mtd_partition qt2410_nand_part[] = { + [0] = { + .name = "U-Boot", + .size = 0x30000, + .offset = 0, + }, + [1] = { + .name = "U-Boot environment", + .offset = 0x30000, + .size = 0x4000, + }, + [2] = { + .name = "kernel", + .offset = 0x34000, + .size = SZ_2M, + }, + [3] = { + .name = "initrd", + .offset = 0x234000, + .size = SZ_4M, + }, + [4] = { + .name = "jffs2", + .offset = 0x634000, + .size = 0x39cc000, + }, +}; + +static struct s3c2410_nand_set qt2410_nand_sets[] = { + [0] = { + .name = "NAND", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(qt2410_nand_part), + .partitions = qt2410_nand_part, + }, +}; + +/* choose a set of timings which should suit most 512Mbit + * chips and beyond. + */ + +static struct s3c2410_platform_nand qt2410_nand_info = { + .tacls = 20, + .twrph0 = 60, + .twrph1 = 20, + .nr_sets = ARRAY_SIZE(qt2410_nand_sets), + .sets = qt2410_nand_sets, +}; + +/* UDC */ + +static struct s3c2410_udc_mach_info qt2410_udc_cfg = { +}; + +static char tft_type = 's'; + +static int __init qt2410_tft_setup(char *str) +{ + tft_type = str[0]; + return 1; +} + +__setup("tft=", qt2410_tft_setup); + +static void __init qt2410_map_io(void) +{ + s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); + s3c24xx_init_clocks(12*1000*1000); + s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + s3c24xx_set_board(&qt2410_board); +} + +static void __init qt2410_machine_init(void) +{ + s3c_device_nand.dev.platform_data = &qt2410_nand_info; + + switch (tft_type) { + case 'p': /* production */ + s3c24xx_fb_set_platdata(&qt2410_prodlcd_cfg); + break; + case 'b': /* big */ + s3c24xx_fb_set_platdata(&qt2410_biglcd_cfg); + break; + case 's': /* small */ + default: + s3c24xx_fb_set_platdata(&qt2410_lcd_cfg); + break; + } + + s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPB0, 1); + + s3c24xx_udc_set_platdata(&qt2410_udc_cfg); + + s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT); + + s3c2410_pm_init(); +} + +MACHINE_START(QT2410, "QT2410") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = qt2410_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = qt2410_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END + + diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c deleted file mode 100644 index ecbcdf79d73..00000000000 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ /dev/null @@ -1,244 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/mach-rx3715.c - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.handhelds.org/projects/rx3715.html - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/console.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware.h> -#include <asm/hardware/iomd.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-lcd.h> - -#include <asm/arch/h1940.h> -#include <asm/arch/nand.h> -#include <asm/arch/fb.h> - -#include "clock.h" -#include "devs.h" -#include "cpu.h" -#include "pm.h" - -static struct map_desc rx3715_iodesc[] __initdata = { - /* dump ISA space somewhere unused */ - - { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS3), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS3), - .length = SZ_1M, - .type = MT_DEVICE, - }, -}; - - -static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = { - [0] = { - .name = "fclk", - .divisor = 0, - .min_baud = 0, - .max_baud = 0, - } -}; - -static struct s3c2410_uartcfg rx3715_uartcfgs[] = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x00, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), - }, - /* IR port */ - [2] = { - .hwport = 2, - .uart_flags = UPF_CONS_FLOW, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0x51, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), - } -}; - -/* framebuffer lcd controller information */ - -static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = { - .regs = { - .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \ - S3C2410_LCDCON1_TFT | \ - S3C2410_LCDCON1_CLKVAL(0x0C), - - .lcdcon2 = S3C2410_LCDCON2_VBPD(5) | \ - S3C2410_LCDCON2_LINEVAL(319) | \ - S3C2410_LCDCON2_VFPD(6) | \ - S3C2410_LCDCON2_VSPW(2), - - .lcdcon3 = S3C2410_LCDCON3_HBPD(35) | \ - S3C2410_LCDCON3_HOZVAL(239) | \ - S3C2410_LCDCON3_HFPD(35), - - .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | \ - S3C2410_LCDCON4_HSPW(7), - - .lcdcon5 = S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_HWSWP, - }, - - .lpcsel = 0xf82, - - .gpccon = 0xaa955699, - .gpccon_mask = 0xffc003cc, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - - .gpdcon = 0xaa95aaa1, - .gpdcon_mask = 0xffc0fff0, - .gpdup = 0x0000faff, - .gpdup_mask = 0xffffffff, - - .fixed_syncs = 1, - .width = 240, - .height = 320, - - .xres = { - .min = 240, - .max = 240, - .defval = 240, - }, - - .yres = { - .max = 320, - .min = 320, - .defval = 320, - }, - - .bpp = { - .min = 16, - .max = 16, - .defval = 16, - }, -}; - -static struct mtd_partition rx3715_nand_part[] = { - [0] = { - .name = "Whole Flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct s3c2410_nand_set rx3715_nand_sets[] = { - [0] = { - .name = "Internal", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(rx3715_nand_part), - .partitions = rx3715_nand_part, - }, -}; - -static struct s3c2410_platform_nand rx3715_nand_info = { - .tacls = 25, - .twrph0 = 50, - .twrph1 = 15, - .nr_sets = ARRAY_SIZE(rx3715_nand_sets), - .sets = rx3715_nand_sets, -}; - -static struct platform_device *rx3715_devices[] __initdata = { - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c, - &s3c_device_iis, - &s3c_device_nand, -}; - -static struct s3c24xx_board rx3715_board __initdata = { - .devices = rx3715_devices, - .devices_count = ARRAY_SIZE(rx3715_devices) -}; - -static void __init rx3715_map_io(void) -{ - s3c_device_nand.dev.platform_data = &rx3715_nand_info; - - s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); - s3c24xx_init_clocks(16934000); - s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); - s3c24xx_set_board(&rx3715_board); -} - -static void __init rx3715_init_irq(void) -{ - s3c24xx_init_irq(); -} - -static void __init rx3715_init_machine(void) -{ - memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); - s3c2410_pm_init(); - - s3c24xx_fb_set_platdata(&rx3715_lcdcfg); -} - - -MACHINE_START(RX3715, "IPAQ-RX3715") - /* Maintainer: Ben Dooks <ben@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C2410_SDRAM_PA + 0x100, - .map_io = rx3715_map_io, - .init_irq = rx3715_init_irq, - .init_machine = rx3715_init_machine, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 01c0c986d82..57b8a80f33d 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -1,4 +1,4 @@ -/*********************************************************************** +/* linux/arch/arm/mach-s3c2410/mach-smdk2410.c * * linux/arch/arm/mach-s3c2410/mach-smdk2410.c * @@ -49,10 +49,10 @@ #include <asm/arch/regs-serial.h> -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> -#include "common-smdk.h" +#include <asm/plat-s3c24xx/common-smdk.h> static struct map_desc smdk2410_iodesc[] __initdata = { /* nothing here yet */ diff --git a/arch/arm/mach-s3c2410/mach-smdk2413.c b/arch/arm/mach-s3c2410/mach-smdk2413.c deleted file mode 100644 index 4f89abd7a6d..00000000000 --- a/arch/arm/mach-s3c2410/mach-smdk2413.c +++ /dev/null @@ -1,140 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/mach-smdk2413.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the - * loans of SMDK2413 to work with. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware.h> -#include <asm/hardware/iomd.h> -#include <asm/setup.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -//#include <asm/debug-ll.h> -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-lcd.h> - -#include <asm/arch/idle.h> -#include <asm/arch/fb.h> - -#include "s3c2410.h" -#include "s3c2412.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" - -#include "common-smdk.h" - -static struct map_desc smdk2413_iodesc[] __initdata = { -}; - -static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - /* IR port */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0x51, - } -}; - -static struct platform_device *smdk2413_devices[] __initdata = { - &s3c_device_usb, - //&s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c, - &s3c_device_iis, -}; - -static struct s3c24xx_board smdk2413_board __initdata = { - .devices = smdk2413_devices, - .devices_count = ARRAY_SIZE(smdk2413_devices) -}; - -static void __init smdk2413_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, - struct meminfo *mi) -{ - if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { - mi->nr_banks=1; - mi->bank[0].start = 0x30000000; - mi->bank[0].size = SZ_64M; - mi->bank[0].node = 0; - } -} - -static void __init smdk2413_map_io(void) -{ - s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); - s3c24xx_set_board(&smdk2413_board); -} - -static void __init smdk2413_machine_init(void) -{ - smdk_machine_init(); -} - -MACHINE_START(S3C2413, "S3C2413") - /* Maintainer: Ben Dooks <ben@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C2410_SDRAM_PA + 0x100, - - .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, - .map_io = smdk2413_map_io, - .init_machine = smdk2413_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END - -MACHINE_START(SMDK2413, "SMDK2413") - /* Maintainer: Ben Dooks <ben@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C2410_SDRAM_PA + 0x100, - - .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, - .map_io = smdk2413_map_io, - .init_machine = smdk2413_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c deleted file mode 100644 index 2b61f4ed1da..00000000000 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ /dev/null @@ -1,208 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/mach-smdk2440.c - * - * Copyright (c) 2004,2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.fluff.org/ben/smdk2440/ - * - * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware.h> -#include <asm/hardware/iomd.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -//#include <asm/debug-ll.h> -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-lcd.h> - -#include <asm/arch/idle.h> -#include <asm/arch/fb.h> - -#include "s3c2410.h" -#include "s3c2440.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" - -#include "common-smdk.h" - -static struct map_desc smdk2440_iodesc[] __initdata = { - /* ISA IO Space map (memory space selected by A24) */ - - { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS2), - .length = 0x10000, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, - .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), - .length = SZ_4M, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = __phys_to_pfn(S3C2410_CS2), - .length = 0x10000, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, - .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), - .length = SZ_4M, - .type = MT_DEVICE, - } -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - /* IR port */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x43, - .ufcon = 0x51, - } -}; - -/* LCD driver info */ - -static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = { - .regs = { - - .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | - S3C2410_LCDCON1_TFT | - S3C2410_LCDCON1_CLKVAL(0x04), - - .lcdcon2 = S3C2410_LCDCON2_VBPD(7) | - S3C2410_LCDCON2_LINEVAL(319) | - S3C2410_LCDCON2_VFPD(6) | - S3C2410_LCDCON2_VSPW(3), - - .lcdcon3 = S3C2410_LCDCON3_HBPD(19) | - S3C2410_LCDCON3_HOZVAL(239) | - S3C2410_LCDCON3_HFPD(7), - - .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | - S3C2410_LCDCON4_HSPW(3), - - .lcdcon5 = S3C2410_LCDCON5_FRM565 | - S3C2410_LCDCON5_INVVLINE | - S3C2410_LCDCON5_INVVFRAME | - S3C2410_LCDCON5_PWREN | - S3C2410_LCDCON5_HWSWP, - }, - -#if 0 - /* currently setup by downloader */ - .gpccon = 0xaa940659, - .gpccon_mask = 0xffffffff, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - .gpdcon = 0xaa84aaa0, - .gpdcon_mask = 0xffffffff, - .gpdup = 0x0000faff, - .gpdup_mask = 0xffffffff, -#endif - - .lpcsel = ((0xCE6) & ~7) | 1<<4, - - .width = 240, - .height = 320, - - .xres = { - .min = 240, - .max = 240, - .defval = 240, - }, - - .yres = { - .min = 320, - .max = 320, - .defval = 320, - }, - - .bpp = { - .min = 16, - .max = 16, - .defval = 16, - }, -}; - -static struct platform_device *smdk2440_devices[] __initdata = { - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c, - &s3c_device_iis, -}; - -static struct s3c24xx_board smdk2440_board __initdata = { - .devices = smdk2440_devices, - .devices_count = ARRAY_SIZE(smdk2440_devices) -}; - -static void __init smdk2440_map_io(void) -{ - s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); - s3c24xx_init_clocks(16934400); - s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); - s3c24xx_set_board(&smdk2440_board); -} - -static void __init smdk2440_machine_init(void) -{ - s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg); - - smdk_machine_init(); -} - -MACHINE_START(S3C2440, "SMDK2440") - /* Maintainer: Ben Dooks <ben@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C2410_SDRAM_PA + 0x100, - - .init_irq = s3c24xx_init_irq, - .map_io = smdk2440_map_io, - .init_machine = smdk2440_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index a382fc09511..c947c75bcbf 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -43,9 +43,9 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/leds-gpio.h> -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> #include "usb-simtec.h" /* macros for virtual address mods for the io space entries */ diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c deleted file mode 100644 index 0360e1055bc..00000000000 --- a/arch/arm/mach-s3c2410/mach-vstms.c +++ /dev/null @@ -1,169 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/mach-vstms.c - * - * (C) 2006 Thomas Gleixner <tglx@linutronix.de> - * - * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware.h> -#include <asm/hardware/iomd.h> -#include <asm/setup.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-lcd.h> - -#include <asm/arch/idle.h> -#include <asm/arch/fb.h> - -#include <asm/arch/nand.h> - -#include "s3c2410.h" -#include "s3c2412.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" - - -static struct map_desc vstms_iodesc[] __initdata = { -}; - -static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, - } -}; - -static struct mtd_partition vstms_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = 0x7C000, - .offset = 0, - }, - [1] = { - .name = "UBoot Config", - .offset = 0x7C000, - .size = 0x4000, - }, - [2] = { - .name = "Kernel", - .offset = 0x80000, - .size = 0x200000, - }, - [3] = { - .name = "RFS", - .offset = 0x280000, - .size = 0x3d80000, - }, -}; - -static struct s3c2410_nand_set vstms_nand_sets[] = { - [0] = { - .name = "NAND", - .nr_chips = 1, - .nr_partitions = ARRAY_SIZE(vstms_nand_part), - .partitions = vstms_nand_part, - }, -}; - -/* choose a set of timings which should suit most 512Mbit - * chips and beyond. -*/ - -static struct s3c2410_platform_nand vstms_nand_info = { - .tacls = 20, - .twrph0 = 60, - .twrph1 = 20, - .nr_sets = ARRAY_SIZE(vstms_nand_sets), - .sets = vstms_nand_sets, -}; - -static struct platform_device *vstms_devices[] __initdata = { - &s3c_device_usb, - &s3c_device_wdt, - &s3c_device_i2c, - &s3c_device_iis, - &s3c_device_rtc, - &s3c_device_nand, -}; - -static struct s3c24xx_board vstms_board __initdata = { - .devices = vstms_devices, - .devices_count = ARRAY_SIZE(vstms_devices) -}; - -static void __init vstms_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, - struct meminfo *mi) -{ - if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { - mi->nr_banks=1; - mi->bank[0].start = 0x30000000; - mi->bank[0].size = SZ_64M; - mi->bank[0].node = 0; - } -} - -static void __init vstms_map_io(void) -{ - s3c_device_nand.dev.platform_data = &vstms_nand_info; - - s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); - s3c24xx_set_board(&vstms_board); -} - -MACHINE_START(VSTMS, "VSTMS") - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S3C2410_SDRAM_PA + 0x100, - - .fixup = vstms_fixup, - .init_irq = s3c24xx_init_irq, - .map_io = vstms_map_io, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c deleted file mode 100644 index 619133eb716..00000000000 --- a/arch/arm/mach-s3c2410/pm-simtec.c +++ /dev/null @@ -1,66 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/pm-simtec.c - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://armlinux.simtec.co.uk/ - * - * Power Management helpers for Simtec S3C24XX implementations - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <asm/hardware.h> -#include <asm/io.h> - -#include <asm/arch/map.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-mem.h> - -#include <asm/mach-types.h> - -#include "pm.h" - -#define COPYRIGHT ", (c) 2005 Simtec Electronics" - -/* pm_simtec_init - * - * enable the power management functions -*/ - -static __init int pm_simtec_init(void) -{ - unsigned long gstatus4; - - /* check which machine we are running on */ - - if (!machine_is_bast() && !machine_is_vr1000() && - !machine_is_anubis() && !machine_is_osiris() && - !machine_is_aml_m5900()) - return 0; - - printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); - - gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; - gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; - gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); - - __raw_writel(gstatus4, S3C2410_GSTATUS4); - - return s3c2410_pm_init(); -} - -arch_initcall(pm_simtec_init); diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index ebf294dd31d..3b3a7db4e0d 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -1,11 +1,9 @@ /* linux/arch/arm/mach-s3c2410/pm.c * - * Copyright (c) 2004,2006 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C24XX Power Manager (Suspend-To-RAM) support - * - * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information + * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,640 +18,139 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Parts based on arch/arm/mach-pxa/pm.c - * - * Thanks to Dimitry Andric for debugging */ #include <linux/init.h> #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> -#include <linux/interrupt.h> -#include <linux/crc32.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/serial_core.h> +#include <linux/sysdev.h> -#include <asm/cacheflush.h> #include <asm/hardware.h> #include <asm/io.h> -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-irq.h> - -#include <asm/mach/time.h> - -#include "pm.h" - -/* for external use */ - -unsigned long s3c_pm_flags; - -#define PFX "s3c24xx-pm: " - -static struct sleep_save core_save[] = { - SAVE_ITEM(S3C2410_LOCKTIME), - SAVE_ITEM(S3C2410_CLKCON), - - /* we restore the timings here, with the proviso that the board - * brings the system up in an slower, or equal frequency setting - * to the original system. - * - * if we cannot guarantee this, then things are going to go very - * wrong here, as we modify the refresh and both pll settings. - */ - - SAVE_ITEM(S3C2410_BWSCON), - SAVE_ITEM(S3C2410_BANKCON0), - SAVE_ITEM(S3C2410_BANKCON1), - SAVE_ITEM(S3C2410_BANKCON2), - SAVE_ITEM(S3C2410_BANKCON3), - SAVE_ITEM(S3C2410_BANKCON4), - SAVE_ITEM(S3C2410_BANKCON5), - - SAVE_ITEM(S3C2410_CLKDIVN), - SAVE_ITEM(S3C2410_MPLLCON), - SAVE_ITEM(S3C2410_UPLLCON), - SAVE_ITEM(S3C2410_CLKSLOW), - SAVE_ITEM(S3C2410_REFRESH), -}; - -static struct sleep_save gpio_save[] = { - SAVE_ITEM(S3C2410_GPACON), - SAVE_ITEM(S3C2410_GPADAT), - - SAVE_ITEM(S3C2410_GPBCON), - SAVE_ITEM(S3C2410_GPBDAT), - SAVE_ITEM(S3C2410_GPBUP), - - SAVE_ITEM(S3C2410_GPCCON), - SAVE_ITEM(S3C2410_GPCDAT), - SAVE_ITEM(S3C2410_GPCUP), - - SAVE_ITEM(S3C2410_GPDCON), - SAVE_ITEM(S3C2410_GPDDAT), - SAVE_ITEM(S3C2410_GPDUP), - - SAVE_ITEM(S3C2410_GPECON), - SAVE_ITEM(S3C2410_GPEDAT), - SAVE_ITEM(S3C2410_GPEUP), - - SAVE_ITEM(S3C2410_GPFCON), - SAVE_ITEM(S3C2410_GPFDAT), - SAVE_ITEM(S3C2410_GPFUP), +#include <asm/mach-types.h> - SAVE_ITEM(S3C2410_GPGCON), - SAVE_ITEM(S3C2410_GPGDAT), - SAVE_ITEM(S3C2410_GPGUP), - - SAVE_ITEM(S3C2410_GPHCON), - SAVE_ITEM(S3C2410_GPHDAT), - SAVE_ITEM(S3C2410_GPHUP), +#include <asm/arch/regs-gpio.h> +#include <asm/arch/h1940.h> - SAVE_ITEM(S3C2410_DCLKCON), -}; +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> #ifdef CONFIG_S3C2410_PM_DEBUG - -#define SAVE_UART(va) \ - SAVE_ITEM((va) + S3C2410_ULCON), \ - SAVE_ITEM((va) + S3C2410_UCON), \ - SAVE_ITEM((va) + S3C2410_UFCON), \ - SAVE_ITEM((va) + S3C2410_UMCON), \ - SAVE_ITEM((va) + S3C2410_UBRDIV) - -static struct sleep_save uart_save[] = { - SAVE_UART(S3C24XX_VA_UART0), - SAVE_UART(S3C24XX_VA_UART1), -#ifndef CONFIG_CPU_S3C2400 - SAVE_UART(S3C24XX_VA_UART2), -#endif -}; - -/* debug - * - * we send the debug to printascii() to allow it to be seen if the - * system never wakes up from the sleep -*/ - -extern void printascii(const char *); - -void pm_dbg(const char *fmt, ...) -{ - va_list va; - char buff[256]; - - va_start(va, fmt); - vsprintf(buff, fmt, va); - va_end(va); - - printascii(buff); -} - -static void s3c2410_pm_debug_init(void) -{ - unsigned long tmp = __raw_readl(S3C2410_CLKCON); - - /* re-start uart clocks */ - tmp |= S3C2410_CLKCON_UART0; - tmp |= S3C2410_CLKCON_UART1; - tmp |= S3C2410_CLKCON_UART2; - - __raw_writel(tmp, S3C2410_CLKCON); - udelay(10); -} - +extern void pm_dbg(const char *fmt, ...); #define DBG(fmt...) pm_dbg(fmt) #else #define DBG(fmt...) printk(KERN_DEBUG fmt) - -#define s3c2410_pm_debug_init() do { } while(0) - -static struct sleep_save uart_save[] = {}; #endif -#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0 - -/* suspend checking code... - * - * this next area does a set of crc checks over all the installed - * memory, so the system can verify if the resume was ok. - * - * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, - * increasing it will mean that the area corrupted will be less easy to spot, - * and reducing the size will cause the CRC save area to grow -*/ - -#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) - -static u32 crc_size; /* size needed for the crc block */ -static u32 *crcs; /* allocated over suspend/resume */ - -typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); - -/* s3c2410_pm_run_res - * - * go thorugh the given resource list, and look for system ram -*/ - -static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) -{ - while (ptr != NULL) { - if (ptr->child != NULL) - s3c2410_pm_run_res(ptr->child, fn, arg); - - if ((ptr->flags & IORESOURCE_MEM) && - strcmp(ptr->name, "System RAM") == 0) { - DBG("Found system RAM at %08lx..%08lx\n", - ptr->start, ptr->end); - arg = (fn)(ptr, arg); - } - - ptr = ptr->sibling; - } -} - -static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg) -{ - s3c2410_pm_run_res(&iomem_resource, fn, arg); -} - -static u32 *s3c2410_pm_countram(struct resource *res, u32 *val) -{ - u32 size = (u32)(res->end - res->start)+1; - - size += CHECK_CHUNKSIZE-1; - size /= CHECK_CHUNKSIZE; - - DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); - - *val += size * sizeof(u32); - return val; -} - -/* s3c2410_pm_prepare_check - * - * prepare the necessary information for creating the CRCs. This - * must be done before the final save, as it will require memory - * allocating, and thus touching bits of the kernel we do not - * know about. -*/ - -static void s3c2410_pm_check_prepare(void) +static void s3c2410_pm_prepare(void) { - crc_size = 0; + /* ensure at least GSTATUS3 has the resume address */ - s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size); + __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); - DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); + DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); + DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); - crcs = kmalloc(crc_size+4, GFP_KERNEL); - if (crcs == NULL) - printk(KERN_ERR "Cannot allocated CRC save area\n"); -} + if (machine_is_h1940()) { + void *base = phys_to_virt(H1940_SUSPEND_CHECK); + unsigned long ptr; + unsigned long calc = 0; -static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val) -{ - unsigned long addr, left; + /* generate check for the bootloader to check on resume */ - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; + for (ptr = 0; ptr < 0x40000; ptr += 0x400) + calc += __raw_readl(base+ptr); - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - *val = crc32_le(~0, phys_to_virt(addr), left); - val++; + __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - return val; -} - -/* s3c2410_pm_check_store - * - * compute the CRC values for the memory blocks before the final - * sleep. -*/ - -static void s3c2410_pm_check_store(void) -{ - if (crcs != NULL) - s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs); -} - -/* in_region - * - * return TRUE if the area defined by ptr..ptr+size contatins the - * what..what+whatsz -*/ - -static inline int in_region(void *ptr, int size, void *what, size_t whatsz) -{ - if ((what+whatsz) < ptr) - return 0; - - if (what > (ptr+size)) - return 0; - - return 1; -} - -static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) -{ - void *save_at = phys_to_virt(s3c2410_sleep_save_phys); - unsigned long addr; - unsigned long left; - void *ptr; - u32 calc; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; + /* the RX3715 uses similar code and the same H1940 and the + * same offsets for resume and checksum pointers */ - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; + if (machine_is_rx3715()) { + void *base = phys_to_virt(H1940_SUSPEND_CHECK); + unsigned long ptr; + unsigned long calc = 0; - ptr = phys_to_virt(addr); + /* generate check for the bootloader to check on resume */ - if (in_region(ptr, left, crcs, crc_size)) { - DBG("skipping %08lx, has crc block in\n", addr); - goto skip_check; - } + for (ptr = 0; ptr < 0x40000; ptr += 0x4) + calc += __raw_readl(base+ptr); - if (in_region(ptr, left, save_at, 32*4 )) { - DBG("skipping %08lx, has save block in\n", addr); - goto skip_check; - } - - /* calculate and check the checksum */ - - calc = crc32_le(~0, ptr, left); - if (calc != *val) { - printk(KERN_ERR PFX "Restore CRC error at " - "%08lx (%08x vs %08x)\n", addr, calc, *val); - - DBG("Restore CRC error at %08lx (%08x vs %08x)\n", - addr, calc, *val); - } - - skip_check: - val++; + __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - return val; -} + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 1); -/* s3c2410_pm_check_restore - * - * check the CRCs after the restore event and free the memory used - * to hold them -*/ - -static void s3c2410_pm_check_restore(void) -{ - if (crcs != NULL) { - s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs); - kfree(crcs); - crcs = NULL; - } } -#else - -#define s3c2410_pm_check_prepare() do { } while(0) -#define s3c2410_pm_check_restore() do { } while(0) -#define s3c2410_pm_check_store() do { } while(0) -#endif - -/* helper functions to save and restore register state */ - -void s3c2410_pm_do_save(struct sleep_save *ptr, int count) +static int s3c2410_pm_resume(struct sys_device *dev) { - for (; count > 0; count--, ptr++) { - ptr->val = __raw_readl(ptr->reg); - DBG("saved %p value %08lx\n", ptr->reg, ptr->val); - } -} + unsigned long tmp; -/* s3c2410_pm_do_restore - * - * restore the system from the given list of saved registers - * - * Note, we do not use DBG() in here, as the system may not have - * restore the UARTs state yet -*/ + /* unset the return-from-sleep flag, to ensure reset */ -void s3c2410_pm_do_restore(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", - ptr->reg, ptr->val, __raw_readl(ptr->reg)); - - __raw_writel(ptr->val, ptr->reg); - } -} + tmp = __raw_readl(S3C2410_GSTATUS2); + tmp &= S3C2410_GSTATUS2_OFFRESET; + __raw_writel(tmp, S3C2410_GSTATUS2); -/* s3c2410_pm_do_restore_core - * - * similar to s3c2410_pm_do_restore_core - * - * WARNING: Do not put any debug in here that may effect memory or use - * peripherals, as things may be changing! -*/ + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 0); -static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - __raw_writel(ptr->val, ptr->reg); - } + return 0; } -/* s3c2410_pm_show_resume_irqs - * - * print any IRQs asserted at resume time (ie, we woke from) -*/ - -static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask) +static int s3c2410_pm_add(struct sys_device *dev) { - int i; + pm_cpu_prep = s3c2410_pm_prepare; + pm_cpu_sleep = s3c2410_cpu_suspend; - which &= ~mask; - - for (i = 0; i <= 31; i++) { - if ((which) & (1L<<i)) { - DBG("IRQ %d asserted at resume\n", start+i); - } - } + return 0; } -/* s3c2410_pm_check_resume_pin - * - * check to see if the pin is configured correctly for sleep mode, and - * make any necessary adjustments if it is not -*/ - -static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) -{ - unsigned long irqstate; - unsigned long pinstate; - int irq = s3c2410_gpio_getirq(pin); - - if (irqoffs < 4) - irqstate = s3c_irqwake_intmask & (1L<<irqoffs); - else - irqstate = s3c_irqwake_eintmask & (1L<<irqoffs); - - pinstate = s3c2410_gpio_getcfg(pin); - - if (!irqstate) { - if (pinstate == S3C2410_GPIO_IRQ) - DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); - } else { - if (pinstate == S3C2410_GPIO_IRQ) { - DBG("Disabling IRQ %d (pin %d)\n", irq, pin); - s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); - } - } -} +#if defined(CONFIG_CPU_S3C2410) +static struct sysdev_driver s3c2410_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; -/* s3c2410_pm_configure_extint - * - * configure all external interrupt pins -*/ +/* register ourselves */ -static void s3c2410_pm_configure_extint(void) +static int __init s3c2410_pm_drvinit(void) { - int pin; - - /* for each of the external interrupts (EINT0..EINT15) we - * need to check wether it is an external interrupt source, - * and then configure it as an input if it is not - */ - - for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { - s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0); - } - - for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { - s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); - } + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver); } -void (*pm_cpu_prep)(void); -void (*pm_cpu_sleep)(void); - -#define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) - -/* s3c2410_pm_enter - * - * central control for sleep/resume process -*/ - -static int s3c2410_pm_enter(suspend_state_t state) -{ - unsigned long regs_save[16]; - - /* ensure the debug is initialised (if enabled) */ - - s3c2410_pm_debug_init(); - - DBG("s3c2410_pm_enter(%d)\n", state); - - if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { - printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); - return -EINVAL; - } - - if (state != PM_SUSPEND_MEM) { - printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n"); - return -EINVAL; - } - - /* check if we have anything to wake-up with... bad things seem - * to happen if you suspend with no wakeup (system will often - * require a full power-cycle) - */ - - if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && - !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { - printk(KERN_ERR PFX "No sources enabled for wake-up!\n"); - printk(KERN_ERR PFX "Aborting sleep\n"); - return -EINVAL; - } - - /* prepare check area if configured */ - - s3c2410_pm_check_prepare(); - - /* store the physical address of the register recovery block */ - - s3c2410_sleep_save_phys = virt_to_phys(regs_save); - - DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); - - /* save all necessary core registers not covered by the drivers */ - - s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); - - /* set the irq configuration for wake */ - - s3c2410_pm_configure_extint(); - - DBG("sleep: irq wakeup masks: %08lx,%08lx\n", - s3c_irqwake_intmask, s3c_irqwake_eintmask); - - __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); - __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); - - /* ack any outstanding external interrupts before we go to sleep */ - - __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); - __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); - __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); - - /* call cpu specific preperation */ - - pm_cpu_prep(); - - /* flush cache back to ram */ - - flush_cache_all(); - - s3c2410_pm_check_store(); - - /* send the cpu to sleep... */ - - __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ - - /* s3c2410_cpu_save will also act as our return point from when - * we resume as it saves its own register state, so use the return - * code to differentiate return from save and return from sleep */ - - if (s3c2410_cpu_save(regs_save) == 0) { - flush_cache_all(); - pm_cpu_sleep(); - } - - /* restore the cpu state */ - - cpu_init(); - - /* restore the system state */ - - s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); - - s3c2410_pm_debug_init(); - - /* check what irq (if any) restored the system */ - - DBG("post sleep: IRQs 0x%08x, 0x%08x\n", - __raw_readl(S3C2410_SRCPND), - __raw_readl(S3C2410_EINTPEND)); - - s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), - s3c_irqwake_intmask); - - s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), - s3c_irqwake_eintmask); - - DBG("post sleep, preparing to return\n"); - - s3c2410_pm_check_restore(); - - /* ok, let's return from sleep */ +arch_initcall(s3c2410_pm_drvinit); +#endif - DBG("S3C2410 PM Resume (post-restore)\n"); - return 0; -} +#if defined(CONFIG_CPU_S3C2440) +static struct sysdev_driver s3c2440_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; -/* - * Called after processes are frozen, but before we shut down devices. - */ -static int s3c2410_pm_prepare(suspend_state_t state) +static int __init s3c2440_pm_drvinit(void) { - return 0; + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver); } -/* - * Called after devices are re-setup, but before processes are thawed. - */ -static int s3c2410_pm_finish(suspend_state_t state) -{ - return 0; -} +arch_initcall(s3c2440_pm_drvinit); +#endif -/* - * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. - */ -static struct pm_ops s3c2410_pm_ops = { - .pm_disk_mode = PM_DISK_FIRMWARE, - .prepare = s3c2410_pm_prepare, - .enter = s3c2410_pm_enter, - .finish = s3c2410_pm_finish, +#if defined(CONFIG_CPU_S3C2442) +static struct sysdev_driver s3c2442_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, }; -/* s3c2410_pm_init - * - * Attach the power management functions. This should be called - * from the board specific initialisation if the board supports - * it. -*/ - -int __init s3c2410_pm_init(void) +static int __init s3c2442_pm_drvinit(void) { - printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n"); - - pm_set_ops(&s3c2410_pm_ops); - return 0; + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver); } + +arch_initcall(s3c2442_pm_drvinit); +#endif diff --git a/arch/arm/mach-s3c2410/pm.h b/arch/arm/mach-s3c2410/pm.h deleted file mode 100644 index ffe197a119f..00000000000 --- a/arch/arm/mach-s3c2410/pm.h +++ /dev/null @@ -1,73 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/pm.h - * - * Copyright (c) 2004 Simtec Electronics - * Written by Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* s3c2410_pm_init - * - * called from board at initialisation time to setup the power - * management -*/ - -#ifdef CONFIG_PM - -extern __init int s3c2410_pm_init(void); - -#else - -static inline int s3c2410_pm_init(void) -{ - return 0; -} -#endif - -/* configuration for the IRQ mask over sleep */ -extern unsigned long s3c_irqwake_intmask; -extern unsigned long s3c_irqwake_eintmask; - -/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ -extern unsigned long s3c_irqwake_intallow; -extern unsigned long s3c_irqwake_eintallow; - -/* per-cpu sleep functions */ - -extern void (*pm_cpu_prep)(void); -extern void (*pm_cpu_sleep)(void); - -/* Flags for PM Control */ - -extern unsigned long s3c_pm_flags; - -/* from sleep.S */ - -extern int s3c2410_cpu_save(unsigned long *saveblk); -extern void s3c2410_cpu_suspend(void); -extern void s3c2410_cpu_resume(void); - -extern unsigned long s3c2410_sleep_save_phys; - -/* sleep save info */ - -struct sleep_save { - void __iomem *reg; - unsigned long val; -}; - -#define SAVE_ITEM(x) \ - { .reg = (x) } - -extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); -extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); - -#ifdef CONFIG_PM -extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); -extern int s3c24xx_irq_resume(struct sys_device *dev); -#else -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL -#endif diff --git a/arch/arm/mach-s3c2410/s3c2400-gpio.c b/arch/arm/mach-s3c2410/s3c2400-gpio.c deleted file mode 100644 index 1576d01d5f8..00000000000 --- a/arch/arm/mach-s3c2410/s3c2400-gpio.c +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2400-gpio.c - * - * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org> - * - * S3C2400 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <asm/arch/regs-gpio.h> - -int s3c2400_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7) - return -1; /* not valid interrupts */ - - return (pin - S3C2410_GPE0) + IRQ_EINT0; -} - -EXPORT_SYMBOL(s3c2400_gpio_getirq); diff --git a/arch/arm/mach-s3c2410/s3c2400.h b/arch/arm/mach-s3c2410/s3c2400.h deleted file mode 100644 index 8b2394e1ed4..00000000000 --- a/arch/arm/mach-s3c2410/s3c2400.h +++ /dev/null @@ -1,31 +0,0 @@ -/* arch/arm/mach-s3c2410/s3c2400.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C2400 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 09-Fev-2006 LCVR First version, based on s3c2410.h -*/ - -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_init(void); - -extern void s3c2400_map_io(struct map_desc *mach_desc, int size); - -extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2400_init_clocks(int xtal); - -#else -#define s3c2400_init_clocks NULL -#define s3c2400_init_uarts NULL -#define s3c2400_map_io NULL -#define s3c2400_init NULL -#endif diff --git a/arch/arm/mach-s3c2410/s3c2410-clock.c b/arch/arm/mach-s3c2410/s3c2410-clock.c deleted file mode 100644 index 992cc6af230..00000000000 --- a/arch/arm/mach-s3c2410/s3c2410-clock.c +++ /dev/null @@ -1,276 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-clock.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410,S3C2440,S3C2442 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/sysdev.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> - -#include <asm/mach/map.h> - -#include <asm/hardware.h> -#include <asm/io.h> - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-gpio.h> - -#include "s3c2410.h" -#include "clock.h" -#include "cpu.h" - -int s3c2410_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - /* ensure none of the special function bits set */ - clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2410_upll_enable(struct clk *clk, int enable) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long orig = clkslow; - - if (enable) - clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; - else - clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - - __raw_writel(clkslow, S3C2410_CLKSLOW); - - /* if we started the UPLL, then allow to settle */ - - if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) - udelay(200); - - return 0; -} - -/* standard clock definitions */ - -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .id = -1, - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND, - }, { - .name = "sdi", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI, - }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC, - }, { - .name = "iis", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS, - }, { - .name = "spi", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI, - } -}; - -static struct clk init_clocks[] = { - { - .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, - }, { - .name = "usb-device", - .id = -1, - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, - }, { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-host", - .id = -1, - .parent = &clk_usb_bus, - }, { - .name = "usb-bus-gadget", - .id = -1, - .parent = &clk_usb_bus, - }, -}; - -/* s3c2410_baseclk_add() - * - * Add all the clocks used by the s3c2410 or compatible CPUs - * such as the S3C2440 and S3C2442. - * - * We cannot use a system device as we are needed before any - * of the init-calls that initialise the devices are actually - * done. -*/ - -int __init s3c2410_baseclk_add(void) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *clkp; - struct clk *xtal; - int ret; - int ptr; - - clk_upll.enable = s3c2410_upll_enable; - - if (s3c24xx_register_clock(&clk_usb_bus) < 0) - printk(KERN_ERR "failed to register usb bus clock\n"); - - /* register clocks from clock array */ - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2410_clkcon_enable(clkp, 0); - } - - /* show the clock-slow value */ - - xtal = clk_get(NULL, "xtal"); - - printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", - print_mhz(clk_get_rate(xtal) / - ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), - (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", - (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", - (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); - - return 0; -} diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c deleted file mode 100644 index e67ba3911f1..00000000000 --- a/arch/arm/mach-s3c2410/s3c2410-dma.c +++ /dev/null @@ -1,161 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 DMA selection - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> - -#include <asm/dma.h> -#include <asm/arch/dma.h> -#include "dma.h" - -#include "cpu.h" - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-ac97.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-lcd.h> -#include <asm/arch/regs-sdi.h> -#include <asm/arch/regs-iis.h> -#include <asm/arch/regs-spi.h> - -static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { - [DMACH_XD0] = { - .name = "xdreq0", - .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, - }, - [DMACH_XD1] = { - .name = "xdreq1", - .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, - }, - [DMACH_SDI] = { - .name = "sdi", - .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_SPI0] = { - .name = "spi0", - .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, - }, - [DMACH_SPI1] = { - .name = "spi1", - .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, - }, - [DMACH_UART0] = { - .name = "uart0", - .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, - }, - [DMACH_UART1] = { - .name = "uart1", - .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, - }, - [DMACH_UART2] = { - .name = "uart2", - .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, - }, - [DMACH_TIMER] = { - .name = "timer", - .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, - }, - [DMACH_I2S_IN] = { - .name = "i2s-sdi", - .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_I2S_OUT] = { - .name = "i2s-sdo", - .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_USB_EP1] = { - .name = "usb-ep1", - .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, - }, - [DMACH_USB_EP2] = { - .name = "usb-ep2", - .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, - }, - [DMACH_USB_EP3] = { - .name = "usb-ep3", - .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, - }, - [DMACH_USB_EP4] = { - .name = "usb-ep4", - .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, - }, -}; - -static void s3c2410_dma_select(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map) -{ - chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; -} - -static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = { - .select = s3c2410_dma_select, - .dcon_mask = 7 << 24, - .map = s3c2410_dma_mappings, - .map_size = ARRAY_SIZE(s3c2410_dma_mappings), -}; - -static int s3c2410_dma_add(struct sys_device *sysdev) -{ - return s3c24xx_dma_init_map(&s3c2410_dma_sel); -} - -#if defined(CONFIG_CPU_S3C2410) -static struct sysdev_driver s3c2410_dma_driver = { - .add = s3c2410_dma_add, -}; - -static int __init s3c2410_dma_init(void) -{ - return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver); -} - -arch_initcall(s3c2410_dma_init); -#endif - -#if defined(CONFIG_CPU_S3C2442) -/* S3C2442 DMA contains the same selection table as the S3C2410 */ -static struct sysdev_driver s3c2442_dma_driver = { - .add = s3c2410_dma_add, -}; - -static int __init s3c2442_dma_init(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver); -} - -arch_initcall(s3c2442_dma_init); -#endif - diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c deleted file mode 100644 index ec3a276cc3c..00000000000 --- a/arch/arm/mach-s3c2410/s3c2410-gpio.c +++ /dev/null @@ -1,71 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-gpio.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <asm/arch/regs-gpio.h> - -int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config) -{ - void __iomem *reg = S3C24XX_EINFLT0; - unsigned long flags; - unsigned long val; - - if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15) - return -1; - - config &= 0xff; - - pin -= S3C2410_GPG8; - reg += pin & ~3; - - local_irq_save(flags); - - /* update filter width and clock source */ - - val = __raw_readl(reg); - val &= ~(0xff << ((pin & 3) * 8)); - val |= config << ((pin & 3) * 8); - __raw_writel(val, reg); - - /* update filter enable */ - - val = __raw_readl(S3C24XX_EXTINT2); - val &= ~(1 << ((pin * 4) + 3)); - val |= on << ((pin * 4) + 3); - __raw_writel(val, S3C24XX_EXTINT2); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_irqfilter); diff --git a/arch/arm/mach-s3c2410/s3c2410-irq.c b/arch/arm/mach-s3c2410/s3c2410-irq.c deleted file mode 100644 index c796c9c76e7..00000000000 --- a/arch/arm/mach-s3c2410/s3c2410-irq.c +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/ptrace.h> -#include <linux/sysdev.h> - -#include "cpu.h" -#include "pm.h" - -static int s3c2410_irq_add(struct sys_device *sysdev) -{ - return 0; -} - -static struct sysdev_driver s3c2410_irq_driver = { - .add = s3c2410_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; - -static int s3c2410_irq_init(void) -{ - return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver); -} - -arch_initcall(s3c2410_irq_init); diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c deleted file mode 100644 index 8bb6e5e21f5..00000000000 --- a/arch/arm/mach-s3c2410/s3c2410-pm.c +++ /dev/null @@ -1,156 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/suspend.h> -#include <linux/errno.h> -#include <linux/time.h> -#include <linux/sysdev.h> - -#include <asm/hardware.h> -#include <asm/io.h> - -#include <asm/mach-types.h> - -#include <asm/arch/regs-gpio.h> -#include <asm/arch/h1940.h> - -#include "cpu.h" -#include "pm.h" - -#ifdef CONFIG_S3C2410_PM_DEBUG -extern void pm_dbg(const char *fmt, ...); -#define DBG(fmt...) pm_dbg(fmt) -#else -#define DBG(fmt...) printk(KERN_DEBUG fmt) -#endif - -static void s3c2410_pm_prepare(void) -{ - /* ensure at least GSTATUS3 has the resume address */ - - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); - - DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); - DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); - - if (machine_is_h1940()) { - void *base = phys_to_virt(H1940_SUSPEND_CHECK); - unsigned long ptr; - unsigned long calc = 0; - - /* generate check for the bootloader to check on resume */ - - for (ptr = 0; ptr < 0x40000; ptr += 0x400) - calc += __raw_readl(base+ptr); - - __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); - } - - /* the RX3715 uses similar code and the same H1940 and the - * same offsets for resume and checksum pointers */ - - if (machine_is_rx3715()) { - void *base = phys_to_virt(H1940_SUSPEND_CHECK); - unsigned long ptr; - unsigned long calc = 0; - - /* generate check for the bootloader to check on resume */ - - for (ptr = 0; ptr < 0x40000; ptr += 0x4) - calc += __raw_readl(base+ptr); - - __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); - } - - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF2, 1); - -} - -static int s3c2410_pm_resume(struct sys_device *dev) -{ - unsigned long tmp; - - /* unset the return-from-sleep flag, to ensure reset */ - - tmp = __raw_readl(S3C2410_GSTATUS2); - tmp &= S3C2410_GSTATUS2_OFFRESET; - __raw_writel(tmp, S3C2410_GSTATUS2); - - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF2, 0); - - return 0; -} - -static int s3c2410_pm_add(struct sys_device *dev) -{ - pm_cpu_prep = s3c2410_pm_prepare; - pm_cpu_sleep = s3c2410_cpu_suspend; - - return 0; -} - -#if defined(CONFIG_CPU_S3C2410) -static struct sysdev_driver s3c2410_pm_driver = { - .add = s3c2410_pm_add, - .resume = s3c2410_pm_resume, -}; - -/* register ourselves */ - -static int __init s3c2410_pm_drvinit(void) -{ - return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver); -} - -arch_initcall(s3c2410_pm_drvinit); -#endif - -#if defined(CONFIG_CPU_S3C2440) -static struct sysdev_driver s3c2440_pm_driver = { - .add = s3c2410_pm_add, - .resume = s3c2410_pm_resume, -}; - -static int __init s3c2440_pm_drvinit(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver); -} - -arch_initcall(s3c2440_pm_drvinit); -#endif - -#if defined(CONFIG_CPU_S3C2442) -static struct sysdev_driver s3c2442_pm_driver = { - .add = s3c2410_pm_add, - .resume = s3c2410_pm_resume, -}; - -static int __init s3c2442_pm_drvinit(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver); -} - -arch_initcall(s3c2442_pm_drvinit); -#endif diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S deleted file mode 100644 index 9179a102458..00000000000 --- a/arch/arm/mach-s3c2410/s3c2410-sleep.S +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 Power Manager (Suspend-To-RAM) support - * - * Based on PXA/SA1100 sleep code by: - * Nicolas Pitre, (c) 2002 Monta Vista Software Inc - * Cliff Brake, (c) 2001 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/hardware.h> -#include <asm/arch/map.h> - -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-serial.h> - - /* s3c2410_cpu_suspend - * - * put the cpu into sleep mode - */ - -ENTRY(s3c2410_cpu_suspend) - @@ prepare cpu to sleep - - ldr r4, =S3C2410_REFRESH - ldr r5, =S3C24XX_MISCCR - ldr r6, =S3C2410_CLKCON - ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) - ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) - ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) - - orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command - orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals - orr r9, r9, #S3C2410_CLKCON_POWER @ power down command - - teq pc, #0 @ first as a trial-run to load cache - bl s3c2410_do_sleep - teq r0, r0 @ now do it for real - b s3c2410_do_sleep @ - - @@ align next bit of code to cache line - .align 8 -s3c2410_do_sleep: - streq r7, [ r4 ] @ SDRAM sleep command - streq r8, [ r5 ] @ SDRAM power-down config - streq r9, [ r6 ] @ CPU sleep -1: beq 1b - mov pc, r14 diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 4cdc0d70c19..1a86a980375 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -31,10 +31,10 @@ #include <asm/arch/regs-clock.h> #include <asm/arch/regs-serial.h> -#include "s3c2410.h" -#include "cpu.h" -#include "devs.h" -#include "clock.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/clock.h> /* Initial IO mappings */ @@ -110,7 +110,7 @@ static struct sys_device s3c2410_sysdev = { /* need to register class before we actually register the device, and * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2440 based system) + * drivers even try to use it (even if not on an s3c2410 based system) * as a driver which may support both 2410 and 2440 may try and use it. */ diff --git a/arch/arm/mach-s3c2410/s3c2410.h b/arch/arm/mach-s3c2410/s3c2410.h deleted file mode 100644 index fbed084f26d..00000000000 --- a/arch/arm/mach-s3c2410/s3c2410.h +++ /dev/null @@ -1,31 +0,0 @@ -/* arch/arm/mach-s3c2410/s3c2410.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2410 machine directory - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#ifdef CONFIG_CPU_S3C2410 - -extern int s3c2410_init(void); - -extern void s3c2410_map_io(struct map_desc *mach_desc, int size); - -extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2410_init_clocks(int xtal); - -extern int s3c2410_baseclk_add(void); - -#else -#define s3c2410_init_clocks NULL -#define s3c2410_init_uarts NULL -#define s3c2410_map_io NULL -#define s3c2410_init NULL -#endif diff --git a/arch/arm/mach-s3c2410/s3c2412-clock.c b/arch/arm/mach-s3c2410/s3c2412-clock.c deleted file mode 100644 index 8f94ad83901..00000000000 --- a/arch/arm/mach-s3c2410/s3c2412-clock.c +++ /dev/null @@ -1,716 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2412-clock.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412,S3C2413 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/sysdev.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> - -#include <asm/mach/map.h> - -#include <asm/hardware.h> -#include <asm/io.h> - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-gpio.h> - -#include "s3c2412.h" -#include "clock.h" -#include "cpu.h" - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -static int s3c2412_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2412_upll_enable(struct clk *clk, int enable) -{ - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - unsigned long orig = upllcon; - - if (!enable) - upllcon |= S3C2412_PLLCON_OFF; - else - upllcon &= ~S3C2412_PLLCON_OFF; - - __raw_writel(upllcon, S3C2410_UPLLCON); - - /* allow ~150uS for the PLL to settle and lock */ - - if (enable && (orig & S3C2412_PLLCON_OFF)) - udelay(150); - - return 0; -} - -/* clock selections */ - -/* CPU EXTCLK input */ -static struct clk clk_ext = { - .name = "extclk", - .id = -1, -}; - -static struct clk clk_erefclk = { - .name = "erefclk", - .id = -1, -}; - -static struct clk clk_urefclk = { - .name = "urefclk", - .id = -1, -}; - -static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_urefclk) - clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL; - else if (parent == &clk_upll) - clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_usysclk = { - .name = "usysclk", - .id = -1, - .parent = &clk_xtal, - .set_parent = s3c2412_setparent_usysclk, -}; - -static struct clk clk_mrefclk = { - .name = "mrefclk", - .parent = &clk_xtal, - .id = -1, -}; - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_xtal, - .id = -1, -}; - -static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_USBCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - if (div > 2) - div = 2; - - return parent_rate / div; -} - -static unsigned long s3c2412_getrate_usbsrc(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1); -} - -static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_usbsrc(clk, rate); - - if ((parent_rate / rate) == 2) - clkdivn |= S3C2412_CLKDIVN_USB48DIV; - else - clkdivn &= ~S3C2412_CLKDIVN_USB48DIV; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_usbsrc = { - .name = "usbsrc", - .id = -1, - .get_rate = s3c2412_getrate_usbsrc, - .set_rate = s3c2412_setrate_usbsrc, - .round_rate = s3c2412_roundrate_usbsrc, - .set_parent = s3c2412_setparent_usbsrc, -}; - -static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_mdivclk) - clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL; - else if (parent == &clk_upll) - clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_msysclk = { - .name = "msysclk", - .id = -1, - .set_parent = s3c2412_setparent_msysclk, -}; - -/* these next clocks have an divider immediately after them, - * so we can register them with their divider and leave out the - * intermediate clock stage -*/ -static unsigned long s3c2412_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations as they cancel out */ - - div = (rate / parent_rate); - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / div; -} - -static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_uart(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_UARTDIV_MASK; - div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_uart = { - .name = "uartclk", - .id = -1, - .get_rate = s3c2412_getrate_uart, - .set_rate = s3c2412_setrate_uart, - .set_parent = s3c2412_setparent_uart, - .round_rate = s3c2412_roundrate_clksrc, -}; - -static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_i2s(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_I2SDIV_MASK; - div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_i2s = { - .name = "i2sclk", - .id = -1, - .get_rate = s3c2412_getrate_i2s, - .set_rate = s3c2412_setrate_i2s, - .set_parent = s3c2412_setparent_i2s, - .round_rate = s3c2412_roundrate_clksrc, -}; - -static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} -static unsigned long s3c2412_getrate_cam(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_CAMDIV_MASK; - div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_cam = { - .name = "camif-upll", /* same as 2440 name */ - .id = -1, - .get_rate = s3c2412_getrate_cam, - .set_rate = s3c2412_setrate_cam, - .set_parent = s3c2412_setparent_cam, - .round_rate = s3c2412_roundrate_clksrc, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .id = -1, - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_NAND, - }, { - .name = "sdi", - .id = -1, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SDI, - }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_ADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIC, - }, { - .name = "iis", - .id = -1, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIS, - }, { - .name = "spi", - .id = -1, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SPI, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma", - .id = 0, - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA0, - }, { - .name = "dma", - .id = 1, - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA1, - }, { - .name = "dma", - .id = 2, - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA2, - }, { - .name = "dma", - .id = 3, - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA3, - }, { - .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_LCDC, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_GPIO, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBH, - }, { - .name = "usb-device", - .id = -1, - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBD, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_PWMT, - }, { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART2, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-gadget", - .id = -1, - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_DEV48, - }, { - .name = "usb-bus-host", - .id = -1, - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_HOST48, - } -}; - -/* clocks to add where we need to check their parentage */ - -struct clk_init { - struct clk *clk; - unsigned int bit; - struct clk *src_0; - struct clk *src_1; -}; - -static struct clk_init clks_src[] __initdata = { - { - .clk = &clk_usysclk, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_urefclk, - .src_1 = &clk_upll, - }, { - .clk = &clk_i2s, - .bit = S3C2412_CLKSRC_I2SCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_cam, - .bit = S3C2412_CLKSRC_CAMCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - }, { - .clk = &clk_msysclk, - .bit = S3C2412_CLKSRC_MSYSCLK_MPLL, - .src_0 = &clk_mdivclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_uart, - .bit = S3C2412_CLKSRC_UARTCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_usbsrc, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - }, -}; - -/* s3c2412_clk_initparents - * - * Initialise the parents for the clocks that we get at start-time -*/ - -static void __init s3c2412_clk_initparents(void) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - struct clk_init *cip = clks_src; - struct clk *src; - int ptr; - int ret; - - for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) { - ret = s3c24xx_register_clock(cip->clk); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - cip->clk->name, ret); - } - - src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0; - - printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name); - clk_set_parent(cip->clk, src); - } -} - -/* clocks to add straight away */ - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_usb_bus, - &clk_erefclk, - &clk_urefclk, - &clk_mrefclk, -}; - -int __init s3c2412_baseclk_add(void) -{ - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *clkp; - int ret; - int ptr; - - clk_upll.enable = s3c2412_upll_enable; - clk_usb_bus.parent = &clk_usbsrc; - clk_usb_bus.rate = 0x0; - - s3c2412_clk_initparents(); - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n"); - - /* for the moment, let's use the UPLL, and see if we can - * get 48MHz */ - - clk_set_parent(&clk_usysclk, &clk_upll); - clk_set_parent(&clk_usbsrc, &clk_usysclk); - clk_set_rate(&clk_usbsrc, 48*1000*1000); - } - - printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_upll)), - print_mhz(clk_get_rate(&clk_usb_bus))); - - /* register clocks from clock array */ - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2412_clkcon_enable(clkp, 0); - } - - return 0; -} diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c deleted file mode 100644 index 138f726ac6b..00000000000 --- a/arch/arm/mach-s3c2410/s3c2412-dma.c +++ /dev/null @@ -1,161 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412 DMA selection - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> - -#include <asm/dma.h> -#include <asm/arch/dma.h> -#include <asm/io.h> - -#include "dma.h" -#include "cpu.h" - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-ac97.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-lcd.h> -#include <asm/arch/regs-sdi.h> -#include <asm/arch/regs-iis.h> -#include <asm/arch/regs-spi.h> - -#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } - -static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { - [DMACH_XD0] = { - .name = "xdreq0", - .channels = MAP(S3C2412_DMAREQSEL_XDREQ0), - }, - [DMACH_XD1] = { - .name = "xdreq1", - .channels = MAP(S3C2412_DMAREQSEL_XDREQ1), - }, - [DMACH_SDI] = { - .name = "sdi", - .channels = MAP(S3C2412_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_SPI0] = { - .name = "spi0", - .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, - }, - [DMACH_SPI1] = { - .name = "spi1", - .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, - }, - [DMACH_UART0] = { - .name = "uart0", - .channels = MAP(S3C2412_DMAREQSEL_UART0_0), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, - }, - [DMACH_UART1] = { - .name = "uart1", - .channels = MAP(S3C2412_DMAREQSEL_UART1_0), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, - }, - [DMACH_UART2] = { - .name = "uart2", - .channels = MAP(S3C2412_DMAREQSEL_UART2_0), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, - }, - [DMACH_UART0_SRC2] = { - .name = "uart0", - .channels = MAP(S3C2412_DMAREQSEL_UART0_1), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, - }, - [DMACH_UART1_SRC2] = { - .name = "uart1", - .channels = MAP(S3C2412_DMAREQSEL_UART1_1), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, - }, - [DMACH_UART2_SRC2] = { - .name = "uart2", - .channels = MAP(S3C2412_DMAREQSEL_UART2_1), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, - }, - [DMACH_TIMER] = { - .name = "timer", - .channels = MAP(S3C2412_DMAREQSEL_TIMER), - }, - [DMACH_I2S_IN] = { - .name = "i2s-sdi", - .channels = MAP(S3C2412_DMAREQSEL_I2SRX), - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_I2S_OUT] = { - .name = "i2s-sdo", - .channels = MAP(S3C2412_DMAREQSEL_I2STX), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_USB_EP1] = { - .name = "usb-ep1", - .channels = MAP(S3C2412_DMAREQSEL_USBEP1), - }, - [DMACH_USB_EP2] = { - .name = "usb-ep2", - .channels = MAP(S3C2412_DMAREQSEL_USBEP2), - }, - [DMACH_USB_EP3] = { - .name = "usb-ep3", - .channels = MAP(S3C2412_DMAREQSEL_USBEP3), - }, - [DMACH_USB_EP4] = { - .name = "usb-ep4", - .channels = MAP(S3C2412_DMAREQSEL_USBEP4), - }, -}; - -static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map) -{ - writel(map->channels[0] | S3C2412_DMAREQSEL_HW, - chan->regs + S3C2412_DMA_DMAREQSEL); -} - -static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { - .select = s3c2412_dma_select, - .dcon_mask = 0, - .map = s3c2412_dma_mappings, - .map_size = ARRAY_SIZE(s3c2412_dma_mappings), -}; - -static int s3c2412_dma_add(struct sys_device *sysdev) -{ - return s3c24xx_dma_init_map(&s3c2412_dma_sel); -} - -static struct sysdev_driver s3c2412_dma_driver = { - .add = s3c2412_dma_add, -}; - -static int __init s3c2412_dma_init(void) -{ - return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver); -} - -arch_initcall(s3c2412_dma_init); diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c deleted file mode 100644 index ffcc30b23a8..00000000000 --- a/arch/arm/mach-s3c2410/s3c2412-irq.c +++ /dev/null @@ -1,133 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/ptrace.h> -#include <linux/sysdev.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <asm/mach/irq.h> - -#include <asm/arch/regs-irq.h> -#include <asm/arch/regs-gpio.h> - -#include "cpu.h" -#include "irq.h" -#include "pm.h" - -/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by - * having them turn up in both the INT* and the EINT* registers. Whilst - * both show the status, they both now need to be acked when the IRQs - * go off. -*/ - -static void -s3c2412_irq_mask(unsigned int irqno) -{ - unsigned long bitval = 1UL << (irqno - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask | bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); -} - -static inline void -s3c2412_irq_ack(unsigned int irqno) -{ - unsigned long bitval = 1UL << (irqno - IRQ_EINT0); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static inline void -s3c2412_irq_maskack(unsigned int irqno) -{ - unsigned long bitval = 1UL << (irqno - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static void -s3c2412_irq_unmask(unsigned int irqno) -{ - unsigned long bitval = 1UL << (irqno - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask & ~bitval, S3C2412_EINTMASK); - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask & ~bitval, S3C2410_INTMSK); -} - -static struct irq_chip s3c2412_irq_eint0t4 = { - .ack = s3c2412_irq_ack, - .mask = s3c2412_irq_mask, - .unmask = s3c2412_irq_unmask, - .set_wake = s3c_irq_wake, - .set_type = s3c_irqext_type, -}; - -static int s3c2412_irq_add(struct sys_device *sysdev) -{ - unsigned int irqno; - - for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - set_irq_chip(irqno, &s3c2412_irq_eint0t4); - set_irq_handler(irqno, handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct sysdev_driver s3c2412_irq_driver = { - .add = s3c2412_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; - -static int s3c2412_irq_init(void) -{ - return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver); -} - -arch_initcall(s3c2412_irq_init); diff --git a/arch/arm/mach-s3c2410/s3c2412-pm.c b/arch/arm/mach-s3c2410/s3c2412-pm.c deleted file mode 100644 index 19b63322d25..00000000000 --- a/arch/arm/mach-s3c2410/s3c2412-pm.c +++ /dev/null @@ -1,128 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://armlinux.simtec.co.uk/. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/sysdev.h> -#include <linux/platform_device.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/arch/regs-power.h> -#include <asm/arch/regs-gpioj.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-dsc.h> - -#include "cpu.h" -#include "pm.h" - -#include "s3c2412.h" - -static void s3c2412_cpu_suspend(void) -{ - unsigned long tmp; - - /* set our standby method to sleep */ - - tmp = __raw_readl(S3C2412_PWRCFG); - tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP; - __raw_writel(tmp, S3C2412_PWRCFG); - - /* issue the standby signal into the pm unit. Note, we - * issue a write-buffer drain just in case */ - - tmp = 0; - - asm("b 1f\n\t" - ".align 5\n\t" - "1:\n\t" - "mcr p15, 0, %0, c7, c10, 4\n\t" - "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); - - /* we should never get past here */ - - panic("sleep resumed to originator?"); -} - -static void s3c2412_pm_prepare(void) -{ -} - -static int s3c2412_pm_add(struct sys_device *sysdev) -{ - pm_cpu_prep = s3c2412_pm_prepare; - pm_cpu_sleep = s3c2412_cpu_suspend; - - return 0; -} - -static struct sleep_save s3c2412_sleep[] = { - SAVE_ITEM(S3C2412_DSC0), - SAVE_ITEM(S3C2412_DSC1), - SAVE_ITEM(S3C2413_GPJDAT), - SAVE_ITEM(S3C2413_GPJCON), - SAVE_ITEM(S3C2413_GPJUP), - - /* save the PWRCFG to get back to original sleep method */ - - SAVE_ITEM(S3C2412_PWRCFG), - - /* save the sleep configuration anyway, just in case these - * get damaged during wakeup */ - - SAVE_ITEM(S3C2412_GPBSLPCON), - SAVE_ITEM(S3C2412_GPCSLPCON), - SAVE_ITEM(S3C2412_GPDSLPCON), - SAVE_ITEM(S3C2412_GPESLPCON), - SAVE_ITEM(S3C2412_GPFSLPCON), - SAVE_ITEM(S3C2412_GPGSLPCON), - SAVE_ITEM(S3C2412_GPHSLPCON), - SAVE_ITEM(S3C2413_GPJSLPCON), -}; - -static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) -{ - s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; -} - -static int s3c2412_pm_resume(struct sys_device *dev) -{ - unsigned long tmp; - - tmp = __raw_readl(S3C2412_PWRCFG); - tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK; - tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; - __raw_writel(tmp, S3C2412_PWRCFG); - - s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; -} - -static struct sysdev_driver s3c2412_pm_driver = { - .add = s3c2412_pm_add, - .suspend = s3c2412_pm_suspend, - .resume = s3c2412_pm_resume, -}; - -static __init int s3c2412_pm_init(void) -{ - return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver); -} - -arch_initcall(s3c2412_pm_init); diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c deleted file mode 100644 index 2f651a811ec..00000000000 --- a/arch/arm/mach-s3c2410/s3c2412.c +++ /dev/null @@ -1,181 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2412.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://armlinux.simtec.co.uk/. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware.h> -#include <asm/proc-fns.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/arch/idle.h> - -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-power.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-gpioj.h> -#include <asm/arch/regs-dsc.h> - -#include "s3c2412.h" -#include "cpu.h" -#include "devs.h" -#include "clock.h" -#include "pm.h" - -#ifndef CONFIG_CPU_S3C2412_ONLY -void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; - -static inline void s3c2412_init_gpio2(void) -{ - s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; -} -#else -#define s3c2412_init_gpio2() do { } while(0) -#endif - -/* Initial IO mappings */ - -static struct map_desc s3c2412_iodesc[] __initdata = { - IODESC_ENT(CLKPWR), - IODESC_ENT(LCD), - IODESC_ENT(TIMER), - IODESC_ENT(WATCHDOG), -}; - -/* uart registration process */ - -void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no); - - /* rename devices that are s3c2412/s3c2413 specific */ - s3c_device_sdi.name = "s3c2412-sdi"; - s3c_device_lcd.name = "s3c2412-lcd"; - s3c_device_nand.name = "s3c2412-nand"; -} - -/* s3c2412_idle - * - * use the standard idle call by ensuring the idle mode - * in power config, then issuing the idle co-processor - * instruction -*/ - -static void s3c2412_idle(void) -{ - unsigned long tmp; - - /* ensure our idle mode is to go to idle */ - - tmp = __raw_readl(S3C2412_PWRCFG); - tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK; - tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; - __raw_writel(tmp, S3C2412_PWRCFG); - - cpu_do_idle(); -} - -/* s3c2412_map_io - * - * register the standard cpu IO areas, and any passed in from the - * machine specific initialisation. -*/ - -void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) -{ - /* move base of IO */ - - s3c2412_init_gpio2(); - - /* set our idle function */ - - s3c24xx_idle = s3c2412_idle; - - /* register our io-tables */ - - iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); - iotable_init(mach_desc, mach_size); -} - -void __init s3c2412_init_clocks(int xtal) -{ - unsigned long tmp; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2); - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); - hclk /= ((tmp & S3C2421_CLKDIVN_ARMDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); - s3c2412_baseclk_add(); -} - -/* need to register class before we actually register the device, and - * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2412 based system) - * as a driver which may support both 2410 and 2440 may try and use it. -*/ - -struct sysdev_class s3c2412_sysclass = { - set_kset_name("s3c2412-core"), -}; - -static int __init s3c2412_core_init(void) -{ - return sysdev_class_register(&s3c2412_sysclass); -} - -core_initcall(s3c2412_core_init); - -static struct sys_device s3c2412_sysdev = { - .cls = &s3c2412_sysclass, -}; - -int __init s3c2412_init(void) -{ - printk("S3C2412: Initialising architecture\n"); - - return sysdev_register(&s3c2412_sysdev); -} diff --git a/arch/arm/mach-s3c2410/s3c2412.h b/arch/arm/mach-s3c2410/s3c2412.h deleted file mode 100644 index c6e56032a6e..00000000000 --- a/arch/arm/mach-s3c2410/s3c2412.h +++ /dev/null @@ -1,29 +0,0 @@ -/* arch/arm/mach-s3c2410/s3c2412.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2412 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_init(void); - -extern void s3c2412_map_io(struct map_desc *mach_desc, int size); - -extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2412_init_clocks(int xtal); - -extern int s3c2412_baseclk_add(void); -#else -#define s3c2412_init_clocks NULL -#define s3c2412_init_uarts NULL -#define s3c2412_map_io NULL -#define s3c2412_init NULL -#endif diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c deleted file mode 100644 index ba13c1d079d..00000000000 --- a/arch/arm/mach-s3c2410/s3c2440-clock.c +++ /dev/null @@ -1,170 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2440-clock.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440 Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/sysdev.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mutex.h> -#include <linux/clk.h> - -#include <asm/hardware.h> -#include <asm/atomic.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <asm/arch/regs-clock.h> - -#include "clock.h" -#include "cpu.h" - -/* S3C2440 extended clock support */ - -static unsigned long s3c2440_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div = (parent_rate / rate) / 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2440_camif_upll_round(clk, rate); - - camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); - - if (rate != parent_rate) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -/* Extra S3C2440 clocks */ - -static struct clk s3c2440_clk_cam = { - .name = "camif", - .id = -1, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2440_clk_cam_upll = { - .name = "camif-upll", - .id = -1, - .set_rate = s3c2440_camif_upll_setrate, - .round_rate = s3c2440_camif_upll_round, -}; - -static struct clk s3c2440_clk_ac97 = { - .name = "ac97", - .id = -1, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static int s3c2440_clk_add(struct sys_device *sysdev) -{ - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; - struct clk *clock_h; - struct clk *clock_p; - struct clk *clock_upll; - - printk("S3C2440: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); - return -EINVAL; - } - - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - mutex_lock(&clocks_mutex); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - mutex_unlock(&clocks_mutex); - } - - s3c2440_clk_cam.parent = clock_h; - s3c2440_clk_ac97.parent = clock_p; - s3c2440_clk_cam_upll.parent = clock_upll; - - s3c24xx_register_clock(&s3c2440_clk_ac97); - s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_cam_upll); - - clk_disable(&s3c2440_clk_ac97); - clk_disable(&s3c2440_clk_cam); - - return 0; -} - -static struct sysdev_driver s3c2440_clk_driver = { - .add = s3c2440_clk_add, -}; - -static __init int s3c24xx_clk_driver(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); -} - -arch_initcall(s3c24xx_clk_driver); diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2410/s3c2440-dma.c deleted file mode 100644 index 47b861b9443..00000000000 --- a/arch/arm/mach-s3c2410/s3c2440-dma.c +++ /dev/null @@ -1,165 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440 DMA selection - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> - -#include <asm/dma.h> -#include <asm/arch/dma.h> -#include "dma.h" - -#include "cpu.h" - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-ac97.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-lcd.h> -#include <asm/arch/regs-sdi.h> -#include <asm/arch/regs-iis.h> -#include <asm/arch/regs-spi.h> - -static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { - [DMACH_XD0] = { - .name = "xdreq0", - .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, - }, - [DMACH_XD1] = { - .name = "xdreq1", - .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, - }, - [DMACH_SDI] = { - .name = "sdi", - .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, - .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_SPI0] = { - .name = "spi0", - .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, - }, - [DMACH_SPI1] = { - .name = "spi1", - .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, - }, - [DMACH_UART0] = { - .name = "uart0", - .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, - }, - [DMACH_UART1] = { - .name = "uart1", - .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, - }, - [DMACH_UART2] = { - .name = "uart2", - .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, - }, - [DMACH_TIMER] = { - .name = "timer", - .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, - }, - [DMACH_I2S_IN] = { - .name = "i2s-sdi", - .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_I2S_OUT] = { - .name = "i2s-sdo", - .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_PCM_IN] = { - .name = "pcm-in", - .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, - .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, - }, - [DMACH_PCM_OUT] = { - .name = "pcm-out", - .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, - .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, - .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, - }, - [DMACH_MIC_IN] = { - .name = "mic-in", - .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, - .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, - }, - [DMACH_USB_EP1] = { - .name = "usb-ep1", - .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, - }, - [DMACH_USB_EP2] = { - .name = "usb-ep2", - .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, - }, - [DMACH_USB_EP3] = { - .name = "usb-ep3", - .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, - }, - [DMACH_USB_EP4] = { - .name = "usb-ep4", - .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, - }, -}; - -static void s3c2440_dma_select(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map) -{ - chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; -} - -static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = { - .select = s3c2440_dma_select, - .dcon_mask = 7 << 24, - .map = s3c2440_dma_mappings, - .map_size = ARRAY_SIZE(s3c2440_dma_mappings), -}; - -static int s3c2440_dma_add(struct sys_device *sysdev) -{ - return s3c24xx_dma_init_map(&s3c2440_dma_sel); -} - -static struct sysdev_driver s3c2440_dma_driver = { - .add = s3c2440_dma_add, -}; - -static int __init s3c2440_dma_init(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver); -} - -arch_initcall(s3c2440_dma_init); - diff --git a/arch/arm/mach-s3c2410/s3c2440-dsc.c b/arch/arm/mach-s3c2410/s3c2440-dsc.c deleted file mode 100644 index c92ea66ba45..00000000000 --- a/arch/arm/mach-s3c2410/s3c2440-dsc.c +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2440-dsc.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C2440 Drive Strength Control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-dsc.h> - -#include "cpu.h" -#include "s3c2440.h" - -int s3c2440_set_dsc(unsigned int pin, unsigned int value) -{ - void __iomem *base; - unsigned long val; - unsigned long flags; - unsigned long mask; - - base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0; - mask = 3 << S3C2440_DSC_GETSHIFT(pin); - - local_irq_save(flags); - - val = __raw_readl(base); - val &= ~mask; - val |= value & mask; - __raw_writel(val, base); - - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(s3c2440_set_dsc); diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c deleted file mode 100644 index 1ba19b27ab0..00000000000 --- a/arch/arm/mach-s3c2410/s3c2440-irq.c +++ /dev/null @@ -1,130 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/ptrace.h> -#include <linux/sysdev.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <asm/mach/irq.h> - -#include <asm/arch/regs-irq.h> -#include <asm/arch/regs-gpio.h> - -#include "cpu.h" -#include "pm.h" -#include "irq.h" - -/* WDT/AC97 */ - -static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - struct irq_desc *mydesc; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 13; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - mydesc = irq_desc + IRQ_S3C2440_WDT; - desc_handle_irq(IRQ_S3C2440_WDT, mydesc); - } - if (subsrc & 2) { - mydesc = irq_desc + IRQ_S3C2440_AC97; - desc_handle_irq(IRQ_S3C2440_AC97, mydesc); - } - } -} - - -#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) - -static void -s3c_irq_wdtac97_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13); -} - -static void -s3c_irq_wdtac97_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_WDT); -} - -static void -s3c_irq_wdtac97_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13); -} - -static struct irq_chip s3c_irq_wdtac97 = { - .mask = s3c_irq_wdtac97_mask, - .unmask = s3c_irq_wdtac97_unmask, - .ack = s3c_irq_wdtac97_ack, -}; - -static int s3c2440_irq_add(struct sys_device *sysdev) -{ - unsigned int irqno; - - printk("S3C2440: IRQ Support\n"); - - /* add new chained handler for wdt, ac7 */ - - set_irq_chip(IRQ_WDT, &s3c_irq_level_chip); - set_irq_handler(IRQ_WDT, handle_level_irq); - set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); - - for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - set_irq_chip(irqno, &s3c_irq_wdtac97); - set_irq_handler(irqno, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c2440_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver); -} - -arch_initcall(s3c2440_irq_init); - diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c deleted file mode 100644 index 344eb27cca4..00000000000 --- a/arch/arm/mach-s3c2410/s3c2440.c +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2440.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C2440 Mobile CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/sysdev.h> -#include <linux/clk.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include "s3c2440.h" -#include "devs.h" -#include "cpu.h" - -static struct sys_device s3c2440_sysdev = { - .cls = &s3c2440_sysclass, -}; - -int __init s3c2440_init(void) -{ - printk("S3C2440: Initialising architecture\n"); - - /* change irq for watchdog */ - - s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; - s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT; - - /* register our system device for everything else */ - - return sysdev_register(&s3c2440_sysdev); -} diff --git a/arch/arm/mach-s3c2410/s3c2440.h b/arch/arm/mach-s3c2410/s3c2440.h deleted file mode 100644 index dcd316076c5..00000000000 --- a/arch/arm/mach-s3c2410/s3c2440.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s3c2410/s3c2440.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2440 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2440 -extern int s3c2440_init(void); -#else -#define s3c2440_init NULL -#endif diff --git a/arch/arm/mach-s3c2410/s3c2442-clock.c b/arch/arm/mach-s3c2410/s3c2442-clock.c deleted file mode 100644 index 4e292ca7c9b..00000000000 --- a/arch/arm/mach-s3c2410/s3c2442-clock.c +++ /dev/null @@ -1,171 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2442-clock.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2442 Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/sysdev.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mutex.h> -#include <linux/clk.h> - -#include <asm/hardware.h> -#include <asm/atomic.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <asm/arch/regs-clock.h> - -#include "clock.h" -#include "cpu.h" - -/* S3C2442 extended clock support */ - -static unsigned long s3c2442_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - - if (div == 3) - return parent_rate / 3; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div /= 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2442_camif_upll_round(clk, rate); - - camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3; - - if (rate == parent_rate) { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL; - } else if ((parent_rate / rate) == 3) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3; - } else { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK; - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -/* Extra S3C2442 clocks */ - -static struct clk s3c2442_clk_cam = { - .name = "camif", - .id = -1, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2442_clk_cam_upll = { - .name = "camif-upll", - .id = -1, - .set_rate = s3c2442_camif_upll_setrate, - .round_rate = s3c2442_camif_upll_round, -}; - -static int s3c2442_clk_add(struct sys_device *sysdev) -{ - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; - struct clk *clock_h; - struct clk *clock_p; - struct clk *clock_upll; - - printk("S3C2442: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); - return -EINVAL; - } - - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - mutex_lock(&clocks_mutex); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - mutex_unlock(&clocks_mutex); - } - - s3c2442_clk_cam.parent = clock_h; - s3c2442_clk_cam_upll.parent = clock_upll; - - s3c24xx_register_clock(&s3c2442_clk_cam); - s3c24xx_register_clock(&s3c2442_clk_cam_upll); - - clk_disable(&s3c2442_clk_cam); - - return 0; -} - -static struct sysdev_driver s3c2442_clk_driver = { - .add = s3c2442_clk_add, -}; - -static __init int s3c2442_clk_init(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver); -} - -arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/mach-s3c2410/s3c2442.c b/arch/arm/mach-s3c2410/s3c2442.c deleted file mode 100644 index 428732ee68c..00000000000 --- a/arch/arm/mach-s3c2410/s3c2442.c +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2442.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C2442 Mobile CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/sysdev.h> - -#include "s3c2442.h" -#include "cpu.h" - -static struct sys_device s3c2442_sysdev = { - .cls = &s3c2442_sysclass, -}; - -int __init s3c2442_init(void) -{ - printk("S3C2442: Initialising architecture\n"); - - return sysdev_register(&s3c2442_sysdev); -} diff --git a/arch/arm/mach-s3c2410/s3c2442.h b/arch/arm/mach-s3c2410/s3c2442.h deleted file mode 100644 index 0ae37d24866..00000000000 --- a/arch/arm/mach-s3c2410/s3c2442.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s3c2410/s3c2442.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2442 -extern int s3c2442_init(void); -#else -#define s3c2442_init NULL -#endif diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c deleted file mode 100644 index ede94636a72..00000000000 --- a/arch/arm/mach-s3c2410/s3c244x-irq.c +++ /dev/null @@ -1,146 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c244x-irq.c - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/ptrace.h> -#include <linux/sysdev.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <asm/mach/irq.h> - -#include <asm/arch/regs-irq.h> -#include <asm/arch/regs-gpio.h> - -#include "cpu.h" -#include "pm.h" -#include "irq.h" - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - struct irq_desc *mydesc; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - mydesc = irq_desc + IRQ_S3C2440_CAM_C; - desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc); - } - if (subsrc & 2) { - mydesc = irq_desc + IRQ_S3C2440_CAM_P; - desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11); -} - -static void -s3c_irq_cam_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11); -} - -static struct irq_chip s3c_irq_cam = { - .mask = s3c_irq_cam_mask, - .unmask = s3c_irq_cam_unmask, - .ack = s3c_irq_cam_ack, -}; - -static int s3c244x_irq_add(struct sys_device *sysdev) -{ - unsigned int irqno; - - set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip); - set_irq_handler(IRQ_NFCON, handle_level_irq); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add chained handler for camera */ - - set_irq_chip(IRQ_CAM, &s3c_irq_level_chip); - set_irq_handler(IRQ_CAM, handle_level_irq); - set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - set_irq_chip(irqno, &s3c_irq_cam); - set_irq_handler(irqno, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c244x_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; - -static int s3c2440_irq_init(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver); -} - -arch_initcall(s3c2440_irq_init); - -static struct sysdev_driver s3c2442_irq_driver = { - .add = s3c244x_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; - - -static int s3c2442_irq_init(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver); -} - -arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mach-s3c2410/s3c244x.c b/arch/arm/mach-s3c2410/s3c244x.c deleted file mode 100644 index 23c7494ad10..00000000000 --- a/arch/arm/mach-s3c2410/s3c244x.c +++ /dev/null @@ -1,184 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c244x.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C2440 and S3C2442 Mobile CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/sysdev.h> -#include <linux/clk.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-gpioj.h> -#include <asm/arch/regs-dsc.h> - -#include "s3c2410.h" -#include "s3c2440.h" -#include "s3c244x.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" -#include "pm.h" - -static struct map_desc s3c244x_iodesc[] __initdata = { - IODESC_ENT(CLKPWR), - IODESC_ENT(TIMER), - IODESC_ENT(WATCHDOG), - IODESC_ENT(LCD), -}; - -/* uart initialisation */ - -void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); -} - -void __init s3c244x_map_io(struct map_desc *mach_desc, int size) -{ - /* register our io-tables */ - - iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc)); - iotable_init(mach_desc, size); - - /* rename any peripherals used differing from the s3c2410 */ - - s3c_device_i2c.name = "s3c2440-i2c"; - s3c_device_nand.name = "s3c2440-nand"; - s3c_device_usbgadget.name = "s3c2440-usbgadget"; -} - -void __init s3c244x_init_clocks(int xtal) -{ - unsigned long clkdiv; - unsigned long camdiv; - unsigned long hclk, fclk, pclk; - int hdiv = 1; - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - /* work out clock scalings */ - - switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) { - case S3C2440_CLKDIVN_HDIVN_1: - hdiv = 1; - break; - - case S3C2440_CLKDIVN_HDIVN_2: - hdiv = 2; - break; - - case S3C2440_CLKDIVN_HDIVN_4_8: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; - break; - - case S3C2440_CLKDIVN_HDIVN_3_6: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; - break; - } - - hclk = fclk / hdiv; - pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1); - - /* print brief summary of clocks, etc */ - - printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - /* initialise the clocks here, to allow other things like the - * console to use them, and to add new ones after the initialisation - */ - - s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); - s3c2410_baseclk_add(); -} - -#ifdef CONFIG_PM - -static struct sleep_save s3c244x_sleep[] = { - SAVE_ITEM(S3C2440_DSC0), - SAVE_ITEM(S3C2440_DSC1), - SAVE_ITEM(S3C2440_GPJDAT), - SAVE_ITEM(S3C2440_GPJCON), - SAVE_ITEM(S3C2440_GPJUP) -}; - -static int s3c244x_suspend(struct sys_device *dev, pm_message_t state) -{ - s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); - return 0; -} - -static int s3c244x_resume(struct sys_device *dev) -{ - s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); - return 0; -} - -#else -#define s3c244x_suspend NULL -#define s3c244x_resume NULL -#endif - -/* Since the S3C2442 and S3C2440 share items, put both sysclasses here */ - -struct sysdev_class s3c2440_sysclass = { - set_kset_name("s3c2440-core"), - .suspend = s3c244x_suspend, - .resume = s3c244x_resume -}; - -struct sysdev_class s3c2442_sysclass = { - set_kset_name("s3c2442-core"), - .suspend = s3c244x_suspend, - .resume = s3c244x_resume -}; - -/* need to register class before we actually register the device, and - * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2440 based system) - * as a driver which may support both 2410 and 2440 may try and use it. -*/ - -static int __init s3c2440_core_init(void) -{ - return sysdev_class_register(&s3c2440_sysclass); -} - -core_initcall(s3c2440_core_init); - -static int __init s3c2442_core_init(void) -{ - return sysdev_class_register(&s3c2442_sysclass); -} - -core_initcall(s3c2442_core_init); diff --git a/arch/arm/mach-s3c2410/s3c244x.h b/arch/arm/mach-s3c2410/s3c244x.h deleted file mode 100644 index 1488c1eb37e..00000000000 --- a/arch/arm/mach-s3c2410/s3c244x.h +++ /dev/null @@ -1,25 +0,0 @@ -/* arch/arm/mach-s3c2410/s3c244x.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C2440 and S3C2442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) - -extern void s3c244x_map_io(struct map_desc *mach_desc, int size); - -extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c244x_init_clocks(int xtal); - -#else -#define s3c244x_init_clocks NULL -#define s3c244x_init_uarts NULL -#define s3c244x_map_io NULL -#endif diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index 2018c2e1dcc..637aaba6539 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/sleep.S +/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -34,126 +34,35 @@ #include <asm/arch/regs-mem.h> #include <asm/arch/regs-serial.h> -/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not - * reset the UART configuration, only enable if you really need this! -*/ -//#define CONFIG_DEBUG_RESUME - - .text - - /* s3c2410_cpu_save - * - * save enough of the CPU state to allow us to re-start - * pm.c code. as we store items like the sp/lr, we will - * end up returning from this function when the cpu resumes - * so the return value is set to mark this. - * - * This arangement means we avoid having to flush the cache - * from this code. - * - * entry: - * r0 = pointer to save block - * - * exit: - * r0 = 0 => we stored everything - * 1 => resumed from sleep - */ - -ENTRY(s3c2410_cpu_save) - stmfd sp!, { r4 - r12, lr } - - @@ store co-processor registers - - mrc p15, 0, r4, c15, c1, 0 @ CP access register - mrc p15, 0, r5, c13, c0, 0 @ PID - mrc p15, 0, r6, c3, c0, 0 @ Domain ID - mrc p15, 0, r7, c2, c0, 0 @ translation table base address - mrc p15, 0, r8, c1, c0, 0 @ control register - - stmia r0, { r4 - r13 } - - mov r0, #0 - ldmfd sp, { r4 - r12, pc } - - @@ return to the caller, after having the MMU - @@ turned on, this restores the last bits from the - @@ stack -resume_with_mmu: - mov r0, #1 - ldmfd sp!, { r4 - r12, pc } - - .ltorg - - @@ the next bits sit in the .data segment, even though they - @@ happen to be code... the s3c2410_sleep_save_phys needs to be - @@ accessed by the resume code before it can restore the MMU. - @@ This means that the variable has to be close enough for the - @@ code to read it... since the .text segment needs to be RO, - @@ the data segment can be the only place to put this code. - - .data - - .global s3c2410_sleep_save_phys -s3c2410_sleep_save_phys: - .word 0 - - /* s3c2410_cpu_resume + /* s3c2410_cpu_suspend * - * resume code entry for bootloader to call - * - * we must put this code here in the data segment as we have no - * other way of restoring the stack pointer after sleep, and we - * must not write to the code segment (code is read-only) + * put the cpu into sleep mode */ -ENTRY(s3c2410_cpu_resume) - mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE - msr cpsr_c, r0 - - @@ load UART to allow us to print the two characters for - @@ resume debug - - mov r2, #S3C24XX_PA_UART & 0xff000000 - orr r2, r2, #S3C24XX_PA_UART & 0xff000 - -#if 0 - /* SMDK2440 LED set */ - mov r14, #S3C24XX_PA_GPIO - ldr r12, [ r14, #0x54 ] - bic r12, r12, #3<<4 - orr r12, r12, #1<<7 - str r12, [ r14, #0x54 ] -#endif - -#ifdef CONFIG_DEBUG_RESUME - mov r3, #'L' - strb r3, [ r2, #S3C2410_UTXH ] -1001: - ldrb r14, [ r3, #S3C2410_UTRSTAT ] - tst r14, #S3C2410_UTRSTAT_TXE - beq 1001b -#endif /* CONFIG_DEBUG_RESUME */ - - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs - mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches - - ldr r0, s3c2410_sleep_save_phys @ address of restore block - ldmia r0, { r4 - r13 } - - mcr p15, 0, r4, c15, c1, 0 @ CP access register - mcr p15, 0, r5, c13, c0, 0 @ PID - mcr p15, 0, r6, c3, c0, 0 @ Domain ID - mcr p15, 0, r7, c2, c0, 0 @ translation table base - -#ifdef CONFIG_DEBUG_RESUME - mov r3, #'R' - strb r3, [ r2, #S3C2410_UTXH ] -#endif - - ldr r2, =resume_with_mmu - mcr p15, 0, r8, c1, c0, 0 @ turn on MMU, etc - nop @ second-to-last before mmu - mov pc, r2 @ go back to virtual address - - .ltorg +ENTRY(s3c2410_cpu_suspend) + @@ prepare cpu to sleep + + ldr r4, =S3C2410_REFRESH + ldr r5, =S3C24XX_MISCCR + ldr r6, =S3C2410_CLKCON + ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) + ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) + ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) + + orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command + orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals + orr r9, r9, #S3C2410_CLKCON_POWER @ power down command + + teq pc, #0 @ first as a trial-run to load cache + bl s3c2410_do_sleep + teq r0, r0 @ now do it for real + b s3c2410_do_sleep @ + + @@ align next bit of code to cache line + .align 5 +s3c2410_do_sleep: + streq r7, [ r4 ] @ SDRAM sleep command + streq r8, [ r5 ] @ SDRAM power-down config + streq r9, [ r6 ] @ CPU sleep +1: beq 1b + mov pc, r14 diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c deleted file mode 100644 index 9910bf0f2ce..00000000000 --- a/arch/arm/mach-s3c2410/time.c +++ /dev/null @@ -1,262 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/time.c - * - * Copyright (C) 2003-2005 Simtec Electronics - * Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/err.h> -#include <linux/clk.h> - -#include <asm/system.h> -#include <asm/leds.h> -#include <asm/mach-types.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/arch/map.h> -#include <asm/arch/regs-timer.h> -#include <asm/arch/regs-irq.h> -#include <asm/mach/time.h> - -#include "clock.h" -#include "cpu.h" - -static unsigned long timer_startval; -static unsigned long timer_usec_ticks; - -#define TIMER_USEC_SHIFT 16 - -/* we use the shifted arithmetic to work out the ratio of timer ticks - * to usecs, as often the peripheral clock is not a nice even multiple - * of 1MHz. - * - * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok - * for the current HZ value of 200 without producing overflows. - * - * Original patch by Dimitry Andric, updated by Ben Dooks -*/ - - -/* timer_mask_usec_ticks - * - * given a clock and divisor, make the value to pass into timer_ticks_to_usec - * to scale the ticks into usecs -*/ - -static inline unsigned long -timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk) -{ - unsigned long den = pclk / 1000; - - return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den; -} - -/* timer_ticks_to_usec - * - * convert timer ticks to usec. -*/ - -static inline unsigned long timer_ticks_to_usec(unsigned long ticks) -{ - unsigned long res; - - res = ticks * timer_usec_ticks; - res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */ - - return res >> TIMER_USEC_SHIFT; -} - -/*** - * Returns microsecond since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - * IRQs are disabled before entering here from do_gettimeofday() - */ - -#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0)) - -static unsigned long s3c2410_gettimeoffset (void) -{ - unsigned long tdone; - unsigned long irqpend; - unsigned long tval; - - /* work out how many ticks have gone since last timer interrupt */ - - tval = __raw_readl(S3C2410_TCNTO(4)); - tdone = timer_startval - tval; - - /* check to see if there is an interrupt pending */ - - irqpend = __raw_readl(S3C2410_SRCPND); - if (irqpend & SRCPND_TIMER4) { - /* re-read the timer, and try and fix up for the missed - * interrupt. Note, the interrupt may go off before the - * timer has re-loaded from wrapping. - */ - - tval = __raw_readl(S3C2410_TCNTO(4)); - tdone = timer_startval - tval; - - if (tval != 0) - tdone += timer_startval; - } - - return timer_ticks_to_usec(tdone); -} - - -/* - * IRQ handler for the timer - */ -static irqreturn_t -s3c2410_timer_interrupt(int irq, void *dev_id) -{ - write_seqlock(&xtime_lock); - timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; -} - -static struct irqaction s3c2410_timer_irq = { - .name = "S3C2410 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = s3c2410_timer_interrupt, -}; - -#define use_tclk1_12() ( \ - machine_is_bast() || \ - machine_is_vr1000() || \ - machine_is_anubis() || \ - machine_is_osiris() ) - -/* - * Set up timer interrupt, and return the current time in seconds. - * - * Currently we only use timer4, as it is the only timer which has no - * other function that can be exploited externally - */ -static void s3c2410_timer_setup (void) -{ - unsigned long tcon; - unsigned long tcnt; - unsigned long tcfg1; - unsigned long tcfg0; - - tcnt = 0xffff; /* default value for tcnt */ - - /* read the current timer configuration bits */ - - tcon = __raw_readl(S3C2410_TCON); - tcfg1 = __raw_readl(S3C2410_TCFG1); - tcfg0 = __raw_readl(S3C2410_TCFG0); - - /* configure the system for whichever machine is in use */ - - if (use_tclk1_12()) { - /* timer is at 12MHz, scaler is 1 */ - timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); - tcnt = 12000000 / HZ; - - tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; - tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1; - } else { - unsigned long pclk; - struct clk *clk; - - /* for the h1940 (and others), we use the pclk from the core - * to generate the timer values. since values around 50 to - * 70MHz are not values we can directly generate the timer - * value from, we need to pre-scale and divide before using it. - * - * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz - * (8.45 ticks per usec) - */ - - /* this is used as default if no other timer can be found */ - - clk = clk_get(NULL, "timers"); - if (IS_ERR(clk)) - panic("failed to get clock for system timer"); - - clk_enable(clk); - - pclk = clk_get_rate(clk); - - /* configure clock tick */ - - timer_usec_ticks = timer_mask_usec_ticks(6, pclk); - - tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; - tcfg1 |= S3C2410_TCFG1_MUX4_DIV2; - - tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; - tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT; - - tcnt = (pclk / 6) / HZ; - } - - /* timers reload after counting zero, so reduce the count by 1 */ - - tcnt--; - - printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n", - tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks); - - /* check to see if timer is within 16bit range... */ - if (tcnt > 0xffff) { - panic("setup_timer: HZ is too small, cannot configure timer!"); - return; - } - - __raw_writel(tcfg1, S3C2410_TCFG1); - __raw_writel(tcfg0, S3C2410_TCFG0); - - timer_startval = tcnt; - __raw_writel(tcnt, S3C2410_TCNTB(4)); - - /* ensure timer is stopped... */ - - tcon &= ~(7<<20); - tcon |= S3C2410_TCON_T4RELOAD; - tcon |= S3C2410_TCON_T4MANUALUPD; - - __raw_writel(tcon, S3C2410_TCON); - __raw_writel(tcnt, S3C2410_TCNTB(4)); - __raw_writel(tcnt, S3C2410_TCMPB(4)); - - /* start the timer running */ - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - __raw_writel(tcon, S3C2410_TCON); -} - -static void __init s3c2410_timer_init (void) -{ - s3c2410_timer_setup(); - setup_irq(IRQ_TIMER4, &s3c2410_timer_irq); -} - -struct sys_timer s3c24xx_timer = { - .init = s3c2410_timer_init, - .offset = s3c2410_gettimeoffset, - .resume = s3c2410_timer_setup -}; diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 22b0e1cdd4b..bcd562ac1d3 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -35,7 +35,7 @@ #include <asm/io.h> #include <asm/irq.h> -#include "devs.h" +#include <asm/plat-s3c24xx/devs.h> #include "usb-simtec.h" /* control power and monitor over-current events on various Simtec |