diff options
Diffstat (limited to 'arch/arm/mach-s3c2410')
31 files changed, 1768 insertions, 308 deletions
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index bbd138be6a7..df37594c30f 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -2,6 +2,13 @@ if ARCH_S3C2410 menu "S3C24XX Implementations" +config MACH_AML_M5900 + bool "AML M5900 Series" + select CPU_S3C2410 + help + Say Y here if you are using the American Microsystems M5900 Series + <http://www.amltd.com> + config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select CPU_S3C2440 @@ -126,6 +133,12 @@ config MACH_NEXCODER_2440 help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board +config MACH_VSTMS + bool "VMSTMS" + select CPU_S3C2412 + help + Say Y here if you are using an VSTMS board + endmenu config S3C2410_CLOCK @@ -133,10 +146,24 @@ config S3C2410_CLOCK help Clock code for the S3C2410, and similar processors +config S3C2410_PM + bool + depends on CONFIG_PM + help + Power Management code common to S3C2410 and better + +config CPU_S3C2410_DMA + bool + depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) + default y if CPU_S3C2410 || CPU_S3C2442 + help + DMA device selection for S3C2410 and compatible CPUs + config CPU_S3C2410 bool depends on ARCH_S3C2410 select S3C2410_CLOCK + select S3C2410_PM help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -149,6 +176,13 @@ config CPU_S3C2412_ONLY !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412 default y if CPU_S3C2412 +config S3C2412_PM + bool + default y if PM + depends on CPU_S3C2412 + help + Internal config node to apply S3C2412 power management + config CPU_S3C2412 bool depends on ARCH_S3C2410 @@ -165,6 +199,7 @@ config CPU_S3C2440 bool depends on ARCH_S3C2410 select S3C2410_CLOCK + select S3C2410_PM select CPU_S3C244X help Support for S3C2440 Samsung Mobile CPU based systems. @@ -173,6 +208,7 @@ config CPU_S3C2442 bool depends on ARCH_S3C2420 select S3C2410_CLOCK + select S3C2410_PM select CPU_S3C244X help Support for S3C2442 Samsung Mobile CPU based systems. @@ -256,7 +292,7 @@ config S3C2410_PM_CHECK_CHUNKSIZE config PM_SIMTEC bool - depends on PM && (ARCH_BAST || MACH_VR1000) + depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900) default y config S3C2410_LOWLEVEL_UART_PORT diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 0eadec91621..d66013365b6 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -9,6 +9,8 @@ obj-y := cpu.o irq.o time.o gpio.o clock.o devs.o obj-m := obj-n := obj- := +obj-dma-y := +obj-dma-n := # DMA obj-$(CONFIG_S3C2410_DMA) += dma.o @@ -20,6 +22,10 @@ obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410-irq.o + +obj-$(CONFIG_S3C2410_PM) += s3c2410-pm.o s3c2410-sleep.o +obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o # Power Management support @@ -30,6 +36,9 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o +obj-dma-$(CONFIG_CPU_S3C2412) += s3c2412-dma.o + +obj-$(CONFIG_S3C2412_PM) += s3c2412-pm.o # # S3C244X support @@ -47,6 +56,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o +obj-dma-$(CONFIG_CPU_S3C2440) += s3c2440-dma.o # S3C2442 support @@ -57,8 +67,13 @@ obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +# merge in dma objects + +obj-y += $(obj-dma-y) + # machine specific support +obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o @@ -71,5 +86,6 @@ obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o obj-$(CONFIG_MACH_OTOM) += mach-otom.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o +obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o obj-$(CONFIG_MACH_SMDK) += common-smdk.o
\ No newline at end of file diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index def4441d244..440e9aa0211 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -18,10 +18,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Modifications: - * 08-Jan-2003 BJD Moved from central IRQ code - * 21-Aug-2005 BJD Fixed missing code and compile errors */ diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c index 1c3c6adae6c..9d4899eddf1 100644 --- a/arch/arm/mach-s3c2410/cpu.c +++ b/arch/arm/mach-s3c2410/cpu.c @@ -124,6 +124,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2412_init, .name = name_s3c2412, }, + { /* a newer version of the s3c2412 */ + .idcode = 0x32412003, + .idmask = 0xffffffff, + .map_io = s3c2412_map_io, + .init_clocks = s3c2412_init_clocks, + .init_uarts = s3c2412_init_uarts, + .init = s3c2412_init, + .name = name_s3c2412, + }, { .idcode = 0x0, /* S3C2400 doesn't have an idcode */ .idmask = 0xffffffff, diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h index 726e2eaf879..14fb0bade71 100644 --- a/arch/arm/mach-s3c2410/devs.h +++ b/arch/arm/mach-s3c2410/devs.h @@ -8,11 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 18-Aug-2004 BJD Created initial version - * 27-Aug-2004 BJD Added timers 0 through 3 - * 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index cc92a7b2db8..d264bbbd8be 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -1,35 +1,16 @@ -/* linux/arch/arm/mach-bast/dma.c +/* linux/arch/arm/mach-s3c2410/dma.c * - * (c) 2003-2005 Simtec Electronics + * (c) 2003-2005,2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 DMA core * - * http://www.simtec.co.uk/products/EB2410ITX/ + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 27-Feb-2005 BJD Added kmem cache for dma descriptors - * 18-Nov-2004 BJD Removed error for loading onto stopped channel - * 10-Nov-2004 BJD Ensure all external symbols exported for modules - * 10-Nov-2004 BJD Use sys_device and sysdev_class for power management - * 08-Aug-2004 BJD Apply rmk's suggestions - * 21-Jul-2004 BJD Ported to linux 2.6 - * 12-Jul-2004 BJD Finished re-write and change of API - * 06-Jul-2004 BJD Rewrote dma code to try and cope with various problems - * 23-May-2003 BJD Created file - * 19-Aug-2003 BJD Cleanup, header fix, added URL - * - * This file is based on the Sangwook Lee/Samsung patches, re-written due - * to various ommisions from the code (such as flexible dma configuration) - * for use with the BAST system board. - * - * The re-write is pretty much complete, and should be good enough for any - * possible DMA function - */ +*/ #ifdef CONFIG_S3C2410_DMA_DEBUG @@ -55,10 +36,14 @@ #include <asm/mach/dma.h> #include <asm/arch/map.h> +#include "dma.h" + /* io map for dma */ static void __iomem *dma_base; static kmem_cache_t *dma_kmem; +struct s3c24xx_dma_selection dma_sel; + /* dma channel state information */ struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; @@ -79,7 +64,6 @@ dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); writel(val, dma_regaddr(chan, reg)); } - #endif #define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) @@ -151,12 +135,20 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) #define dbg_showchan(chan) do { } while(0) #endif /* CONFIG_S3C2410_DMA_DEBUG */ -#define check_channel(chan) \ - do { if ((chan) >= S3C2410_DMA_CHANNELS) { \ - printk(KERN_ERR "%s: invalid channel %d\n", __FUNCTION__, (chan)); \ - return -EINVAL; \ - } } while(0) +static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; +/* lookup_dma_channel + * + * change the dma channel number given into a real dma channel id +*/ + +static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) +{ + if (channel & DMACH_LOW_LEVEL) + return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; + else + return dma_chan_map[channel]; +} /* s3c2410_dma_stats_timeout * @@ -321,8 +313,10 @@ static inline void s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, enum s3c2410_dma_buffresult result) { +#if 0 pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", chan->callback_fn, buf, buf->id, buf->size, result); +#endif if (chan->callback_fn != NULL) { (chan->callback_fn)(chan, buf->id, buf->size, result); @@ -439,7 +433,6 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) return 0; } - /* s3c2410_dma_enqueue * * queue an given buffer for dma transfer. @@ -460,11 +453,12 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) int s3c2410_dma_enqueue(unsigned int channel, void *id, dma_addr_t data, int size) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); struct s3c2410_dma_buf *buf; unsigned long flags; - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: id=%p, data=%08x, size=%d\n", __FUNCTION__, id, (unsigned int)data, size); @@ -562,8 +556,10 @@ s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) static inline void s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) { +#if 0 pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", chan->number, chan->load_state); +#endif switch (chan->load_state) { case S3C2410_DMALOAD_NONE: @@ -718,7 +714,8 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) if (chan->load_state == S3C2410_DMALOAD_NONE) { pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", chan->number, jiffies); - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); + s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, + S3C2410_DMAOP_STOP); } } @@ -726,37 +723,34 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) return IRQ_HANDLED; } +static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); + /* s3c2410_request_dma * * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, struct s3c2410_dma_client *client, +int s3c2410_dma_request(unsigned int channel, + struct s3c2410_dma_client *client, void *dev) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan; unsigned long flags; int err; pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", channel, client->name, dev); - check_channel(channel); - local_irq_save(flags); - dbg_showchan(chan); - - if (chan->in_use) { - if (client != chan->client) { - printk(KERN_ERR "dma%d: already in use\n", channel); - local_irq_restore(flags); - return -EBUSY; - } else { - printk(KERN_ERR "dma%d: client already has channel\n", channel); - } + chan = s3c2410_dma_map_channel(channel); + if (chan == NULL) { + local_irq_restore(flags); + return -EBUSY; } + dbg_showchan(chan); + chan->client = client; chan->in_use = 1; @@ -809,14 +803,14 @@ EXPORT_SYMBOL(s3c2410_dma_request); int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); unsigned long flags; - check_channel(channel); + if (chan == NULL) + return -EINVAL; local_irq_save(flags); - if (chan->client != client) { printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", channel, chan->client, client); @@ -837,8 +831,12 @@ int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) if (chan->irq_claimed) free_irq(chan->irq, (void *)chan); + chan->irq_claimed = 0; + if (!(channel & DMACH_LOW_LEVEL)) + dma_chan_map[channel] = NULL; + local_irq_restore(flags); return 0; @@ -848,8 +846,8 @@ EXPORT_SYMBOL(s3c2410_dma_free); static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) { - unsigned long tmp; unsigned long flags; + unsigned long tmp; pr_debug("%s:\n", __FUNCTION__); @@ -997,9 +995,10 @@ s3c2410_dma_started(struct s3c2410_dma_chan *chan) int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; switch (op) { case S3C2410_DMAOP_START: @@ -1046,12 +1045,19 @@ int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", __FUNCTION__, channel, xferunit, dcon); - check_channel(channel); + if (chan == NULL) + return -EINVAL; + + printk("Initial dcon is %08x\n", dcon); + + dcon |= chan->dcon & dma_sel.dcon_mask; + + printk("New dcon is %08x\n", dcon); switch (xferunit) { case 1: @@ -1086,9 +1092,10 @@ EXPORT_SYMBOL(s3c2410_dma_config); int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); @@ -1106,9 +1113,10 @@ EXPORT_SYMBOL(s3c2410_dma_setflags); int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); @@ -1121,9 +1129,10 @@ EXPORT_SYMBOL(s3c2410_dma_set_opfn); int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); @@ -1153,9 +1162,10 @@ int s3c2410_dma_devconfig(int channel, int hwcfg, unsigned long devaddr) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", __FUNCTION__, (int)source, hwcfg, devaddr); @@ -1200,9 +1210,10 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; if (src != NULL) *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); @@ -1252,7 +1263,7 @@ static int s3c2410_dma_resume(struct sys_device *dev) #define s3c2410_dma_resume NULL #endif /* CONFIG_PM */ -static struct sysdev_class dma_sysclass = { +struct sysdev_class dma_sysclass = { set_kset_name("s3c24xx-dma"), .suspend = s3c2410_dma_suspend, .resume = s3c2410_dma_resume, @@ -1265,7 +1276,6 @@ static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f) memset(p, 0, sizeof(struct s3c2410_dma_buf)); } - /* initialisation code */ static int __init s3c2410_init_dma(void) @@ -1274,7 +1284,7 @@ static int __init s3c2410_init_dma(void) int channel; int ret; - printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n"); + printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n"); dma_base = ioremap(S3C24XX_PA_DMA, 0x200); if (dma_base == NULL) { @@ -1282,6 +1292,8 @@ static int __init s3c2410_init_dma(void) return -ENOMEM; } + printk("Registering sysclass\n"); + ret = sysdev_class_register(&dma_sysclass); if (ret != 0) { printk(KERN_ERR "dma sysclass registration failed\n"); @@ -1335,4 +1347,95 @@ static int __init s3c2410_init_dma(void) return ret; } -__initcall(s3c2410_init_dma); +core_initcall(s3c2410_init_dma); + +static inline int is_channel_valid(unsigned int channel) +{ + return (channel & DMA_CH_VALID); +} + +/* s3c2410_dma_map_channel() + * + * turn the virtual channel number into a real, and un-used hardware + * channel. + * + * currently this code uses first-free channel from the specified harware + * map, not taking into account anything that the board setup code may + * have to say about the likely peripheral set to be in use. +*/ + +struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) +{ + struct s3c24xx_dma_map *ch_map; + struct s3c2410_dma_chan *dmach; + int ch; + + if (dma_sel.map == NULL || channel > dma_sel.map_size) + return NULL; + + ch_map = dma_sel.map + channel; + + for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) { + if (!is_channel_valid(ch_map->channels[ch])) + continue; + + if (s3c2410_chans[ch].in_use == 0) { + printk("mapped channel %d to %d\n", channel, ch); + break; + } + } + + if (ch >= S3C2410_DMA_CHANNELS) + return NULL; + + /* update our channel mapping */ + + dmach = &s3c2410_chans[ch]; + dma_chan_map[channel] = dmach; + + /* select the channel */ + + (dma_sel.select)(dmach, ch_map); + + return dmach; +} + +static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch) +{ + /* show the channel configuration */ + + printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name, + (is_channel_valid(map->channels[0]) ? '0' : '-'), + (is_channel_valid(map->channels[1]) ? '1' : '-'), + (is_channel_valid(map->channels[2]) ? '2' : '-'), + (is_channel_valid(map->channels[3]) ? '3' : '-')); +} + +static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) +{ + if (1) + s3c24xx_dma_show_ch(map, ch); + + return 0; +} + +int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) +{ + struct s3c24xx_dma_map *nmap; + size_t map_sz = sizeof(*nmap) * sel->map_size; + int ptr; + + nmap = kmalloc(map_sz, GFP_KERNEL); + if (nmap == NULL) + return -ENOMEM; + + memcpy(nmap, sel->map, map_sz); + memcpy(&dma_sel, sel, sizeof(*sel)); + + dma_sel.map = nmap; + + for (ptr = 0; ptr < sel->map_size; ptr++) + s3c24xx_dma_check_entry(nmap+ptr, ptr); + + return 0; +} diff --git a/arch/arm/mach-s3c2410/dma.h b/arch/arm/mach-s3c2410/dma.h new file mode 100644 index 00000000000..0ebfe0aab80 --- /dev/null +++ b/arch/arm/mach-s3c2410/dma.h @@ -0,0 +1,45 @@ +/* arch/arm/mach-s3c2410/dma.h + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C24XX DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern struct sysdev_class dma_sysclass; +extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; + +#define DMA_CH_VALID (1<<31) + +struct s3c24xx_dma_addr { + unsigned long from; + unsigned long to; +}; + +/* struct s3c24xx_dma_map + * + * this holds the mapping information for the channel selected + * to be connected to the specified device +*/ + +struct s3c24xx_dma_map { + const char *name; + struct s3c24xx_dma_addr hw_addr; + + unsigned long channels[S3C2410_DMA_CHANNELS]; +}; + +struct s3c24xx_dma_selection { + struct s3c24xx_dma_map *map; + unsigned long map_size; + unsigned long dcon_mask; + + void (*select)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map); +}; + +extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index cd39e868458..db6393c9986 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -18,21 +18,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Changelog - * 13-Sep-2004 BJD Implemented change of MISCCR - * 14-Sep-2004 BJD Added getpin call - * 14-Sep-2004 BJD Fixed bug in setpin() call - * 30-Sep-2004 BJD Fixed cfgpin() mask bug - * 01-Oct-2004 BJD Added getcfg() to get pin configuration - * 01-Oct-2004 BJD Fixed mask bug in pullup() call - * 01-Oct-2004 BJD Added getirq() to turn pin into irqno - * 04-Oct-2004 BJD Added irq filter controls for GPIO - * 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code - * 13-Mar-2005 BJD Updates for __iomem - * 26-Oct-2005 BJD Added generic configuration types - * 15-Jan-2006 LCVR Added support for the S3C2400 - */ +*/ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index cd6139b3599..3e9f3462c61 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -181,17 +181,19 @@ s3c_irq_unmask(unsigned int irqno) } struct irqchip s3c_irq_level_chip = { - .ack = s3c_irq_maskack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake + .name = "s3c-level", + .ack = s3c_irq_maskack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake }; static struct irqchip s3c_irq_chip = { - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake + .name = "s3c", + .ack = s3c_irq_ack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake }; static void @@ -343,19 +345,21 @@ s3c_irqext_type(unsigned int irq, unsigned int type) } static struct irqchip s3c_irqext_chip = { - .mask = s3c_irqext_mask, - .unmask = s3c_irqext_unmask, - .ack = s3c_irqext_ack, - .set_type = s3c_irqext_type, - .set_wake = s3c_irqext_wake + .name = "s3c-ext", + .mask = s3c_irqext_mask, + .unmask = s3c_irqext_unmask, + .ack = s3c_irqext_ack, + .set_type = s3c_irqext_type, + .set_wake = s3c_irqext_wake }; static struct irqchip s3c_irq_eint0t4 = { - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake, - .set_type = s3c_irqext_type, + .name = "s3c-ext0", + .ack = s3c_irq_ack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake, + .set_type = s3c_irqext_type, }; /* mask values for the parent registers for each of the interrupt types */ @@ -387,9 +391,10 @@ s3c_irq_uart0_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart0 = { - .mask = s3c_irq_uart0_mask, - .unmask = s3c_irq_uart0_unmask, - .ack = s3c_irq_uart0_ack, + .name = "s3c-uart0", + .mask = s3c_irq_uart0_mask, + .unmask = s3c_irq_uart0_unmask, + .ack = s3c_irq_uart0_ack, }; /* UART1 */ @@ -413,9 +418,10 @@ s3c_irq_uart1_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart1 = { - .mask = s3c_irq_uart1_mask, - .unmask = s3c_irq_uart1_unmask, - .ack = s3c_irq_uart1_ack, + .name = "s3c-uart1", + .mask = s3c_irq_uart1_mask, + .unmask = s3c_irq_uart1_unmask, + .ack = s3c_irq_uart1_ack, }; /* UART2 */ @@ -439,9 +445,10 @@ s3c_irq_uart2_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart2 = { - .mask = s3c_irq_uart2_mask, - .unmask = s3c_irq_uart2_unmask, - .ack = s3c_irq_uart2_ack, + .name = "s3c-uart2", + .mask = s3c_irq_uart2_mask, + .unmask = s3c_irq_uart2_unmask, + .ack = s3c_irq_uart2_ack, }; /* ADC and Touchscreen */ @@ -465,9 +472,10 @@ s3c_irq_adc_ack(unsigned int irqno) } static struct irqchip s3c_irq_adc = { - .mask = s3c_irq_adc_mask, - .unmask = s3c_irq_adc_unmask, - .ack = s3c_irq_adc_ack, + .name = "s3c-adc", + .mask = s3c_irq_adc_mask, + .unmask = s3c_irq_adc_unmask, + .ack = s3c_irq_adc_ack, }; /* irq demux for adc */ @@ -569,23 +577,104 @@ s3c_irq_demux_uart2(unsigned int irq, } static void -s3c_irq_demux_extint(unsigned int irq, - struct irqdesc *desc, - struct pt_regs *regs) +s3c_irq_demux_extint8(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) { unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); eintpnd &= ~eintmsk; + eintpnd &= ~0xff; /* ignore lower irqs */ - if (eintpnd) { |