diff options
Diffstat (limited to 'arch/arm/mach-pxa')
54 files changed, 843 insertions, 197 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 7aefb907485..dd235ecc9d6 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -8,19 +8,16 @@ config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform (aka Lubbock)" select PXA25x select SA1111 - select PXA_HAVE_BOARD_IRQS config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_ZYLONITE bool select PXA3xx select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_ZYLONITE300 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" @@ -44,6 +41,10 @@ config MACH_TAVOREVB select PXA3xx select CPU_PXA930 +config MACH_TAVOREVB3 + bool "PXA95x Development Platform (aka TavorEVB III)" + select CPU_PXA950 + config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx @@ -61,7 +62,6 @@ config ARCH_VIPER select ISA select I2C_GPIO select HAVE_PWM - select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS select ARCOM_PCMCIA @@ -69,7 +69,6 @@ config MACH_ARCOM_ZEUS bool "Arcom/Eurotech ZEUS SBC" select PXA27x select ISA - select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS select ARCOM_PCMCIA @@ -77,7 +76,6 @@ config MACH_BALLOON3 bool "Balloon 3 board" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_CSB726 bool "Enable Cogent CSB726 System On a Module" @@ -140,13 +138,11 @@ config MACH_INTELMOTE2 bool "Intel Mote 2 Platform" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_STARGATE2 bool "Intel Stargate 2 Platform" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_XCEP bool "Iskratel Electronics XCEP" @@ -206,13 +202,11 @@ config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" @@ -247,7 +241,6 @@ config MACH_COLIBRI_PXA270_INCOME depends on MACH_COLIBRI select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" @@ -274,7 +267,6 @@ config MACH_H4700 select PXA27x select IWMMXT select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_H5000 bool "HP iPAQ h5000" @@ -289,7 +281,6 @@ config MACH_MAGICIAN select PXA27x select IWMMXT select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_MIOA701 bool "Mitac Mio A701 Support" @@ -307,7 +298,6 @@ config PXA_EZX select PXA27x select IWMMXT select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_EZX_A780 bool "Motorola EZX A780" @@ -478,7 +468,6 @@ config MACH_POODLE depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO - select PXA_HAVE_BOARD_IRQS config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" @@ -523,7 +512,6 @@ config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" depends on PXA_SHARPSL select PXA25x - select PXA_HAVE_BOARD_IRQS config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" @@ -552,7 +540,6 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x - select PXA_HAVE_BOARD_IRQS config MACH_E330 bool "Toshiba e330" @@ -606,7 +593,6 @@ config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS endmenu @@ -643,6 +629,7 @@ config CPU_PXA300 config CPU_PXA310 bool select CPU_PXA300 + select PXA310_ULPI if USB_ULPI help PXA310 (codename Monahans-LV) @@ -692,10 +679,10 @@ config SHARPSL_PM_MAX1111 select HWMON select SENSORS_MAX1111 -config PXA_HAVE_BOARD_IRQS +config PXA_HAVE_ISA_IRQS bool -config PXA_HAVE_ISA_IRQS +config PXA310_ULPI bool endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 85c7fb324db..e2f89c2c6f4 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -18,7 +18,7 @@ endif # SoC-specific code obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o -obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o +obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o @@ -32,6 +32,7 @@ obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o obj-$(CONFIG_MACH_LITTLETON) += littleton.o obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o +obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o obj-$(CONFIG_MACH_SAAR) += saar.o # 3rd Party Dev Platforms diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 9041340fee1..79d0f6cf53d 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -68,42 +68,6 @@ static unsigned long balloon3_pin_config[] __initdata = { /* Reset, configured as GPIO wakeup source */ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, - - /* LEDs */ - GPIO9_GPIO, /* NAND activity LED */ - GPIO10_GPIO, /* Heartbeat LED */ - - /* AC97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - GPIO113_AC97_nRESET, - GPIO95_GPIO, - - /* MMC */ - GPIO32_MMC_CLK, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - GPIO112_MMC_CMD, - - /* USB Host */ - GPIO88_USBH1_PWR, - GPIO89_USBH1_PEN, - - /* PC Card */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO85_nPCE_1, - GPIO54_nPCE_2, - GPIO79_PSKTSEL, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, }; /****************************************************************************** @@ -132,6 +96,34 @@ int __init parse_balloon3_features(char *arg) early_param("balloon3_features", parse_balloon3_features); /****************************************************************************** + * Compact Flash slot + ******************************************************************************/ +#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE) +static unsigned long balloon3_cf_pin_config[] __initdata = { + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, +}; + +static void __init balloon3_cf_init(void) +{ + if (!balloon3_has(BALLOON3_FEATURE_CF)) + return; + + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config)); +} +#else +static inline void balloon3_cf_init(void) {} +#endif + +/****************************************************************************** * NOR Flash ******************************************************************************/ #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) @@ -179,6 +171,15 @@ static inline void balloon3_nor_init(void) {} ******************************************************************************/ #if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static unsigned long balloon3_ac97_pin_config[] __initdata = { + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO113_AC97_nRESET, + GPIO95_GPIO, +}; + static struct ucb1400_pdata vpac270_ucb1400_pdata = { .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ), }; @@ -197,6 +198,7 @@ static void __init balloon3_ts_init(void) if (!balloon3_has(BALLOON3_FEATURE_AUDIO)) return; + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config)); pxa_set_ac97_info(NULL); platform_device_register(&balloon3_ucb1400_device); } @@ -208,6 +210,11 @@ static inline void balloon3_ts_init(void) {} * Framebuffer ******************************************************************************/ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static unsigned long balloon3_lcd_pin_config[] __initdata = { + GPIOxx_LCD_TFT_16BPP, + GPIO99_GPIO, +}; + static struct pxafb_mode_info balloon3_lcd_modes[] = { { .pixclock = 38000, @@ -242,6 +249,8 @@ static void __init balloon3_lcd_init(void) if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY)) return; + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config)); + ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON"); if (ret) { pr_err("Requesting BKL-ON GPIO failed!\n"); @@ -271,6 +280,15 @@ static inline void balloon3_lcd_init(void) {} * SD/MMC card controller ******************************************************************************/ #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static unsigned long balloon3_mmc_pin_config[] __initdata = { + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, +}; + static struct pxamci_platform_data balloon3_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .gpio_card_detect = -1, @@ -281,6 +299,7 @@ static struct pxamci_platform_data balloon3_mci_platform_data = { static void __init balloon3_mmc_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config)); pxa_set_mci_info(&balloon3_mci_platform_data); } #else @@ -339,6 +358,11 @@ static inline void balloon3_irda_init(void) {} * USB Host ******************************************************************************/ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static unsigned long balloon3_uhc_pin_config[] __initdata = { + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, +}; + static struct pxaohci_platform_data balloon3_ohci_info = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, @@ -348,6 +372,7 @@ static void __init balloon3_uhc_init(void) { if (!balloon3_has(BALLOON3_FEATURE_OHCI)) return; + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config)); pxa_set_ohci_info(&balloon3_ohci_info); } #else @@ -358,6 +383,11 @@ static inline void balloon3_uhc_init(void) {} * LEDs ******************************************************************************/ #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static unsigned long balloon3_led_pin_config[] __initdata = { + GPIO9_GPIO, /* NAND activity LED */ + GPIO10_GPIO, /* Heartbeat LED */ +}; + struct gpio_led balloon3_gpio_leds[] = { { .name = "balloon3:green:idle", @@ -436,6 +466,7 @@ static struct platform_device balloon3_pcf_leds = { static void __init balloon3_leds_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config)); platform_device_register(&balloon3_leds); platform_device_register(&balloon3_pcf_leds); } @@ -757,6 +788,7 @@ static void __init balloon3_init(void) balloon3_ts_init(); balloon3_udc_init(); balloon3_uhc_init(); + balloon3_cf_init(); } static struct map_desc balloon3_io_desc[] __initdata = { @@ -779,6 +811,7 @@ MACHINE_START(BALLOON3, "Balloon3") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = balloon3_map_io, + .nr_irqs = BALLOON3_NR_IRQS, .init_irq = balloon3_init_irq, .timer = &pxa_timer, .init_machine = balloon3_init, diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index bff6e78f033..ad40e7b141e 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -33,6 +33,9 @@ extern void cmx255_init(void); extern void cmx270_init(void); +/* reserve IRQs for IT8152 */ +#define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40) + /* virtual addresses for statically mapped regions */ #define CMX2XX_VIRT_BASE (0xe8000000) #define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE) @@ -514,6 +517,7 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = cmx2xx_map_io, + .nr_irqs = CMX2XX_NR_IRQS, .init_irq = cmx2xx_init_irq, .timer = &pxa_timer, .init_machine = cmx2xx_init, diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index c70e6c2f4e7..8e0b5622b27 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <linux/gpio.h> #include <linux/dm9000.h> @@ -50,6 +51,7 @@ #include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <mach/audio.h> +#include <mach/pxa3xx-u2d.h> #include <asm/mach/map.h> @@ -68,6 +70,8 @@ #define GPIO97_RTC_RD (97) #define GPIO98_RTC_IO (98) +#define GPIO_ULPI_PHY_RST (127) + static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = { /* LCD */ GPIO54_LCD_LDD_0, @@ -472,6 +476,78 @@ static void __init cm_x300_init_mmc(void) static inline void cm_x300_init_mmc(void) {} #endif +#if defined(CONFIG_PXA310_ULPI) +static struct clk *pout_clk; + +static int cm_x300_ulpi_phy_reset(void) +{ + int err; + + /* reset the PHY */ + err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset"); + if (err) { + pr_err("%s: failed to request ULPI reset GPIO: %d\n", + __func__, err); + return err; + } + + gpio_direction_output(GPIO_ULPI_PHY_RST, 0); + msleep(10); + gpio_set_value(GPIO_ULPI_PHY_RST, 1); + msleep(10); + + gpio_free(GPIO_ULPI_PHY_RST); + + return 0; +} + +static inline int cm_x300_u2d_init(struct device *dev) +{ + int err = 0; + + if (cpu_is_pxa310()) { + /* CLK_POUT is connected to the ULPI PHY */ + pout_clk = clk_get(NULL, "CLK_POUT"); + if (IS_ERR(pout_clk)) { + err = PTR_ERR(pout_clk); + pr_err("%s: failed to get CLK_POUT: %d\n", + __func__, err); + return err; + } + clk_enable(pout_clk); + + err = cm_x300_ulpi_phy_reset(); + if (err) { + clk_disable(pout_clk); + clk_put(pout_clk); + } + } + + return err; +} + +static void cm_x300_u2d_exit(struct device *dev) +{ + if (cpu_is_pxa310()) { + clk_disable(pout_clk); + clk_put(pout_clk); + } +} + +static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = { + .ulpi_mode = ULPI_SER_6PIN, + .init = cm_x300_u2d_init, + .exit = cm_x300_u2d_exit, +}; + +static void cm_x300_init_u2d(void) +{ + pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data); +} +#else +static inline void cm_x300_init_u2d(void) {} +#endif + #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int cm_x300_ohci_init(struct device *dev) { @@ -754,6 +830,7 @@ static void __init cm_x300_init(void) cm_x300_init_da9030(); cm_x300_init_dm9000(); cm_x300_init_lcd(); + cm_x300_init_u2d(); cm_x300_init_ohci(); cm_x300_init_mmc(); cm_x300_init_nand(); diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 0a0d0fe9922..88fbec05ec5 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -159,7 +159,7 @@ static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy) static unsigned int pxa3xx_cpufreq_get(unsigned int cpu) { - return get_clk_frequency_khz(0); + return pxa3xx_get_clk_frequency_khz(0); } static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, @@ -212,7 +212,8 @@ static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) policy->cpuinfo.min_freq = 104000; policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000; policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->cur = policy->min = policy->max = get_clk_frequency_khz(0); + policy->max = pxa3xx_get_clk_frequency_khz(0); + policy->cur = policy->min = policy->max; if (cpu_is_pxa300() || cpu_is_pxa310()) ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs)); diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 65447dc736c..08b41034387 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -6,11 +6,12 @@ #include <asm/pmu.h> #include <mach/udc.h> +#include <mach/pxa3xx-u2d.h> #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/pxa2xx_spi.h> #include <mach/camera.h> #include <mach/audio.h> @@ -134,6 +135,33 @@ struct platform_device pxa27x_device_udc = { } }; +#ifdef CONFIG_PXA3xx +static struct resource pxa3xx_u2d_resources[] = { + [0] = { + .start = 0x54100000, + .end = 0x54100fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USB2, + .end = IRQ_USB2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa3xx_device_u2d = { + .name = "pxa3xx-u2d", + .id = -1, + .resource = pxa3xx_u2d_resources, + .num_resources = ARRAY_SIZE(pxa3xx_u2d_resources), +}; + +void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info) +{ + pxa_register_device(&pxa3xx_device_u2d, info); +} +#endif /* CONFIG_PXA3xx */ + static struct resource pxafb_resources[] = { [0] = { .start = 0x44000000, diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 50353ea49ba..715e8bd02e2 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -4,6 +4,7 @@ extern struct platform_device pxa3xx_device_mci2; extern struct platform_device pxa3xx_device_mci3; extern struct platform_device pxa25x_device_udc; extern struct platform_device pxa27x_device_udc; +extern struct platform_device pxa3xx_device_u2d; extern struct platform_device pxa_device_fb; extern struct platform_device pxa_device_ffuart; extern struct platform_device pxa_device_btuart; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 0517c17978f..51286a738a3 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -43,7 +43,7 @@ #include <mach/pxafb.h> #include <mach/ohci.h> #include <mach/mmc.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <plat/i2c.h> #include <mach/camera.h> #include <mach/pxa2xx_spi.h> diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 349212a1cbd..4971ce11950 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -29,6 +29,7 @@ #include <mach/pxa25x.h> #include <mach/eseries-gpio.h> +#include <mach/eseries-irq.h> #include <mach/audio.h> #include <mach/pxafb.h> #include <mach/udc.h> @@ -183,6 +184,7 @@ MACHINE_START(E330, "Toshiba e330") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e330_init, @@ -233,6 +235,7 @@ MACHINE_START(E350, "Toshiba e350") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e350_init, @@ -356,6 +359,7 @@ MACHINE_START(E400, "Toshiba e400") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e400_init, @@ -545,6 +549,7 @@ MACHINE_START(E740, "Toshiba e740") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e740_init, @@ -737,6 +742,7 @@ MACHINE_START(E750, "Toshiba e750") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e750_init, @@ -933,6 +939,7 @@ MACHINE_START(E800, "Toshiba e800") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, |