aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa')
-rw-r--r--arch/arm/mach-pxa/Makefile5
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa2xx.c493
2 files changed, 0 insertions, 498 deletions
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 929e7008e2e..648867a8caa 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -7,11 +7,6 @@ obj-y += clock.o devices.o generic.o irq.o \
time.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
-ifeq ($(CONFIG_CPU_FREQ),y)
-obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o
-endif
-
# Generic drivers that other drivers may depend upon
# SoC-specific code
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
deleted file mode 100644
index f1ca4daa1ad..00000000000
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ /dev/null
@@ -1,493 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
- *
- * Copyright (C) 2002,2003 Intrinsyc Software
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * History:
- * 31-Jul-2002 : Initial version [FB]
- * 29-Jan-2003 : added PXA255 support [FB]
- * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
- *
- * Note:
- * This driver may change the memory bus clock rate, but will not do any
- * platform specific access timing changes... for example if you have flash
- * memory connected to CS0, you will need to register a platform specific
- * notifier which will adjust the memory access strobes to maintain a
- * minimum strobe width.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-#include <linux/io.h>
-
-#include <mach/pxa2xx-regs.h>
-#include <mach/smemc.h>
-
-#ifdef DEBUG
-static unsigned int freq_debug;
-module_param(freq_debug, uint, 0);
-MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
-#else
-#define freq_debug 0
-#endif
-
-static struct regulator *vcc_core;
-
-static unsigned int pxa27x_maxfreq;
-module_param(pxa27x_maxfreq, uint, 0);
-MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
- "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
-
-typedef struct {
- unsigned int khz;
- unsigned int membus;
- unsigned int cccr;
- unsigned int div2;
- unsigned int cclkcfg;
- int vmin;
- int vmax;
-} pxa_freqs_t;
-
-/* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF 64 /* standard 64ms SDRAM */
-static unsigned int sdram_rows;
-
-#define CCLKCFG_TURBO 0x1
-#define CCLKCFG_FCS 0x2
-#define CCLKCFG_HALFTURBO 0x4
-#define CCLKCFG_FASTBUS 0x8
-#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK 0xFFF
-
-#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
-#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
-
-/*
- * PXA255 definitions
- */
-/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
-#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS
-
-static pxa_freqs_t pxa255_run_freqs[] =
-{
- /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
- { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
- {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */
- {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */
- {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */
- {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */
- {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */
-};
-
-/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
-static pxa_freqs_t pxa255_turbo_freqs[] =
-{
- /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
- { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
- {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */
- {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */
- {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */
- {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */
-};
-
-#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
-#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
-
-static struct cpufreq_frequency_table
- pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
-static struct cpufreq_frequency_table
- pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
-
-static unsigned int pxa255_turbo_table;
-module_param(pxa255_turbo_table, uint, 0);
-MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
-
-/*
- * PXA270 definitions
- *
- * For the PXA27x:
- * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
- *
- * A = 0 => memory controller clock from table 3-7,
- * A = 1 => memory controller clock = system bus clock
- * Run mode frequency = 13 MHz * L
- * Turbo mode frequency = 13 MHz * L * N
- * System bus frequency = 13 MHz * L / (B + 1)
- *
- * In CCCR:
- * A = 1
- * L = 16 oscillator to run mode ratio
- * 2N = 6 2 * (turbo mode to run mode ratio)
- *
- * In CCLKCFG:
- * B = 1 Fast bus mode
- * HT = 0 Half-Turbo mode
- * T = 1 Turbo mode
- *
- * For now, just support some of the combinations in table 3-7 of
- * PXA27x Processor Family Developer's Manual to simplify frequency
- * change sequences.
- */
-#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
-#define CCLKCFG2(B, HT, T) \
- (CCLKCFG_FCS | \
- ((B) ? CCLKCFG_FASTBUS : 0) | \
- ((HT) ? CCLKCFG_HALFTURBO : 0) | \
- ((T) ? CCLKCFG_TURBO : 0))
-
-static pxa_freqs_t pxa27x_freqs[] = {
- {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 },
- {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
- {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
- {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
- {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
- {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
- {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
-};
-
-#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
-static struct cpufreq_frequency_table
- pxa27x_freq_table[NUM_PXA27x_FREQS+1];
-
-extern unsigned get_clk_frequency_khz(int info);
-
-#ifdef CONFIG_REGULATOR
-
-static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
-{
- int ret = 0;
- int vmin, vmax;
-
- if (!cpu_is_pxa27x())
- return 0;
-
- vmin = pxa_freq->vmin;
- vmax = pxa_freq->vmax;
- if ((vmin == -1) || (vmax == -1))
- return 0;
-
- ret = regulator_set_voltage(vcc_core, vmin, vmax);
- if (ret)
- pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
- vmin, vmax);
- return ret;
-}
-
-static __init void pxa_cpufreq_init_voltages(void)
-{
- vcc_core = regulator_get(NULL, "vcc_core");
- if (IS_ERR(vcc_core)) {
- pr_info("cpufreq: Didn't find vcc_core regulator\n");
- vcc_core = NULL;
- } else {
- pr_info("cpufreq: Found vcc_core regulator\n");
- }
-}
-#else
-static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
-{
- return 0;
-}
-
-static __init void pxa_cpufreq_init_voltages(void) { }
-#endif
-
-static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
- pxa_freqs_t **pxa_freqs)
-{
- if (cpu_is_pxa25x()) {
- if (!pxa255_turbo_table) {
- *pxa_freqs = pxa255_run_freqs;
- *freq_table = pxa255_run_freq_table;
- } else {
- *pxa_freqs = pxa255_turbo_freqs;
- *freq_table = pxa255_turbo_freq_table;
- }
- }
- if (cpu_is_pxa27x()) {
- *pxa_freqs = pxa27x_freqs;
- *freq_table = pxa27x_freq_table;
- }
-}
-
-static void pxa27x_guess_max_freq(void)
-{
- if (!pxa27x_maxfreq) {
- pxa27x_maxfreq = 416000;
- printk(KERN_INFO "PXA CPU 27x max frequency not defined "
- "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
- pxa27x_maxfreq);
- } else {
- pxa27x_maxfreq *= 1000;
- }
-}
-
-static void init_sdram_rows(void)
-{
- uint32_t mdcnfg = __raw_readl(MDCNFG);
- unsigned int drac2 = 0, drac0 = 0;
-
- if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
- drac2 = MDCNFG_DRAC2(mdcnfg);
-
- if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
- drac0 = MDCNFG_DRAC0(mdcnfg);
-
- sdram_rows = 1 << (11 + max(drac0, drac2));
-}
-
-static u32 mdrefr_dri(unsigned int freq)
-{
- u32 interval = freq * SDRAM_TREF / sdram_rows;
-
- return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
-}
-
-/* find a valid frequency point */
-static int pxa_verify_policy(struct cpufreq_policy *policy)
-{
- struct cpufreq_frequency_table *pxa_freqs_table;
- pxa_freqs_t *pxa_freqs;
- int ret;
-
- find_freq_tables(&pxa_freqs_table, &pxa_freqs);
- ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
-
- if (freq_debug)
- pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
- policy->min, policy->max);
-
- return ret;
-}
-
-static unsigned int pxa_cpufreq_get(unsigned int cpu)
-{
- return get_clk_frequency_khz(0);
-}
-
-static int pxa_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_frequency_table *pxa_freqs_table;
- pxa_freqs_t *pxa_freq_settings;
- struct cpufreq_freqs freqs;
- unsigned int idx;
- unsigned long flags;
- unsigned int new_freq_cpu, new_freq_mem;
- unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
- int ret = 0;
-
- /* Get the current policy */
- find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
-
- /* Lookup the next frequency */
- if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
- target_freq, relation, &idx)) {
- return -EINVAL;
- }
-
- new_freq_cpu = pxa_freq_settings[idx].khz;
- new_freq_mem = pxa_freq_settings[idx].membus;
- freqs.old = policy->cur;
- freqs.new = new_freq_cpu;
-
- if (freq_debug)
- pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
- freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
- (new_freq_mem / 2000) : (new_freq_mem / 1000));
-
- if (vcc_core && freqs.new > freqs.old)
- ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
- if (ret)
- return ret;
- /*
- * Tell everyone what we're about to do...
- * you should add a notify client with any platform specific
- * Vcc changing capability
- */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
- /* Calculate the next MDREFR. If we're slowing down the SDRAM clock
- * we need to preset the smaller DRI before the change. If we're
- * speeding up we need to set the larger DRI value after the change.
- */
- preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
- if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
- preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
- preset_mdrefr |= mdrefr_dri(new_freq_mem);
- }
- postset_mdrefr =
- (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
-
- /* If we're dividing the memory clock by two for the SDRAM clock, this
- * must be set prior to the change. Clearing the divide must be done
- * after the change.
- */
- if (pxa_freq_settings[idx].div2) {
- preset_mdrefr |= MDREFR_DB2_MASK;
- postset_mdrefr |= MDREFR_DB2_MASK;
- } else {
- postset_mdrefr &= ~MDREFR_DB2_MASK;
- }
-
- local_irq_save(flags);
-
- /* Set new the CCCR and prepare CCLKCFG */
- CCCR = pxa_freq_settings[idx].cccr;
- cclkcfg = pxa_freq_settings[idx].cclkcfg;
-
- asm volatile(" \n\
- ldr r4, [%1] /* load MDREFR */ \n\
- b 2f \n\
- .align 5 \n\
-1: \n\
- str %3, [%1] /* preset the MDREFR */ \n\
- mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\
- str %4, [%1] /* postset the MDREFR */ \n\
- \n\
- b 3f \n\
-2: b 1b \n\
-3: nop \n\
- "
- : "=&r" (unused)
- : "r" (MDREFR), "r" (cclkcfg),
- "r" (preset_mdrefr), "r" (postset_mdrefr)
- : "r4", "r5");
- local_irq_restore(flags);
-
- /*
- * Tell everyone what we've just done...
- * you should add a notify client with any platform specific
- * SDRAM refresh timer adjustments
- */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- /*
- * Even if voltage setting fails, we don't report it, as the frequency
- * change succeeded. The voltage reduction is not a critical failure,
- * only power savings will suffer from this.
- *
- * Note: if the voltage change fails, and a return value is returned, a
- * bug is triggered (seems a deadlock). Should anybody find out where,
- * the "return 0" should become a "return ret".
- */
- if (vcc_core && freqs.new < freqs.old)
- ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
-
- return 0;
-}
-
-static int pxa_cpufreq_init(struct cpufreq_policy *policy)
-{
- int i;
- unsigned int freq;
- struct cpufreq_frequency_table *pxa255_freq_table;
- pxa_freqs_t *pxa255_freqs;
-
- /* try to guess pxa27x cpu */
- if (cpu_is_pxa27x())
- pxa27x_guess_max_freq();
-
- pxa_cpufreq_init_voltages();
-
- init_sdram_rows();
-
- /* set default policy and cpuinfo */
- policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
- policy->cur = get_clk_frequency_khz(0); /* current freq */
- policy->min = policy->max = policy->cur;
-
- /* Generate pxa25x the run cpufreq_frequency_table struct */
- for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
- pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
- pxa255_run_freq_table[i].index = i;
- }
- pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
- /* Generate pxa25x the turbo cpufreq_frequency_table struct */
- for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
- pxa255_turbo_freq_table[i].frequency =
- pxa255_turbo_freqs[i].khz;
- pxa255_turbo_freq_table[i].index = i;
- }
- pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
- pxa255_turbo_table = !!pxa255_turbo_table;
-
- /* Generate the pxa27x cpufreq_frequency_table struct */
- for (i = 0; i < NUM_PXA27x_FREQS; i++) {
- freq = pxa27x_freqs[i].khz;
- if (freq > pxa27x_maxfreq)
- break;
- pxa27x_freq_table[i].frequency = freq;
- pxa27x_freq_table[i].index = i;
- }
- pxa27x_freq_table[i].index = i;
- pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
- /*
- * Set the policy's minimum and maximum frequencies from the tables
- * just constructed. This sets cpuinfo.mxx_freq, min and max.
- */
- if (cpu_is_pxa25x()) {
- find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
- pr_info("PXA255 cpufreq using %s frequency table\n",
- pxa255_turbo_table ? "turbo" : "run");
- cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table);
- }
- else if (cpu_is_pxa27x())
- cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
-
- printk(KERN_INFO "PXA CPU frequency change support initialized\n");
-
- return 0;
-}
-
-static struct cpufreq_driver pxa_cpufreq_driver = {
- .verify = pxa_verify_policy,
- .target = pxa_set_target,
- .init = pxa_cpufreq_init,
- .get = pxa_cpufreq_get,
- .name = "PXA2xx",
-};
-
-static int __init pxa_cpu_init(void)
-{
- int ret = -ENODEV;
- if (cpu_is_pxa25x() || cpu_is_pxa27x())
- ret = cpufreq_register_driver(&pxa_cpufreq_driver);
- return ret;
-}
-
-static void __exit pxa_cpu_exit(void)
-{
- cpufreq_unregister_driver(&pxa_cpufreq_driver);
-}
-
-
-MODULE_AUTHOR("Intrinsyc Software Inc.");
-MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
-MODULE_LICENSE("GPL");
-module_init(pxa_cpu_init);
-module_exit(pxa_cpu_exit);
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-27 18:30:37 +0000