diff options
Diffstat (limited to 'arch/arm/mach-pxa')
93 files changed, 7325 insertions, 3659 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index e8ee7ec9ff6..f27f6b3d6e6 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -38,16 +38,23 @@ config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform" select PXA25x select SA1111 + select PXA_HAVE_BOARD_IRQS config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x select HAVE_PWM + select PXA_HAVE_BOARD_IRQS config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform" select PXA27x select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + +config MACH_MP900C + bool "Nec Mobilepro 900/c" + select PXA25x config ARCH_PXA_IDP bool "Accelent Xscale IDP" @@ -114,10 +121,21 @@ config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" depends on PXA_SHARPSL select PXA25x + select PXA_HAVE_BOARD_IRQS + +config ARCH_VIPER + bool "Arcom/Eurotech VIPER SBC" + select PXA25x + select ISA + select I2C_GPIO + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + select PXA_HAVE_ISA_IRQS config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x + select PXA_HAVE_BOARD_IRQS config MACH_E330 bool "Toshiba e330" @@ -170,13 +188,41 @@ config MACH_E800 Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. +config TRIZEPS_PXA + bool "PXA based Keith und Koep Trizeps DIMM-Modules" + config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" + depends on TRIZEPS_PXA + select TRIZEPS_PCMCIA select PXA27x -config MACH_TRIZEPS4_CONXS +config MACH_TRIZEPS4WL + bool "Keith und Koep Trizeps4-WL DIMM-Module" + depends on TRIZEPS_PXA + select TRIZEPS_PCMCIA + select PXA27x + select PXA_SSP + +choice + prompt "Select base board for Trizeps module" + depends on TRIZEPS_PXA + +config MACH_TRIZEPS_CONXS bool "ConXS Eval Board" - depends on MACH_TRIZEPS4 + +config MACH_TRIZEPS_UCONXS + bool "uConXS Eval Board" + +config MACH_TRIZEPS_ANY + bool "another Board" + +endchoice + +config TRIZEPS_PCMCIA + bool + help + Enable PCMCIA support for Trizeps modules config MACH_EM_X270 bool "CompuLab EM-x270 platform" @@ -189,6 +235,7 @@ config MACH_COLIBRI config MACH_ZYLONITE bool "PXA3xx Development Platform (aka Zylonite)" select PXA3xx + select PXA_SSP select HAVE_PWM config MACH_LITTLETON @@ -207,20 +254,42 @@ config MACH_SAAR select PXA930 config MACH_ARMCORE - bool "CompuLab CM-X270 modules" + bool "CompuLab CM-X255/CM-X270 modules" select PXA27x select IWMMXT + select ZONE_DMA if PCI + select PXA25x + select PXA_SSP + +config MACH_CM_X300 + bool "CompuLab CM-X300 modules" + select PXA3xx + select CPU_PXA300 config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT + select PXA_HAVE_BOARD_IRQS + +config MACH_MIOA701 + bool "Mitac Mio A701 Support" + select PXA27x + select IWMMXT + select LEDS_GPIO + select HAVE_PWM + select GPIO_SYSFS + help + Say Y here if you intend to run this kernel on a + MIO A701. Currently there is only basic support + for this PDA. config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT select PXA_SSP + select PXA_HAVE_BOARD_IRQS config ARCH_PXA_PALM bool "PXA based Palm PDAs" @@ -236,6 +305,16 @@ config MACH_PALMTX Say Y here if you intend to run this kernel on a Palm T|X handheld computer. +config MACH_PALMZ72 + bool "Palm Zire 72" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on Palm Zire 72 + handheld computer. + config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" select HAVE_PWM @@ -256,6 +335,9 @@ config PCM990_DISPLAY_NONE endchoice +config MACH_AM200EPD + depends on MACH_GUMSTIX_F + bool "Enable AM200EPD board support" config PXA_EZX bool "Motorola EZX Platform" @@ -343,4 +425,10 @@ config TOSA_BT This is a simple driver that is able to control the state of built in bluetooth chip on tosa. +config PXA_HAVE_BOARD_IRQS + bool + +config PXA_HAVE_ISA_IRQS + bool + endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 99ecbe7f850..d31c9979cfa 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -6,7 +6,12 @@ obj-y += clock.o devices.o generic.o irq.o dma.o \ time.o gpio.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o -obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o + +ifeq ($(CONFIG_CPU_FREQ),y) +obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o +obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o +obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o +endif # Generic drivers that other drivers may depend upon obj-$(CONFIG_PXA_SSP) += ssp.o @@ -22,27 +27,33 @@ obj-$(CONFIG_CPU_PXA930) += pxa930.o # Specific board support obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o +obj-$(CONFIG_MACH_AM200EPD) += am200epd.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o +obj-$(CONFIG_MACH_MP900C) += mp900.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_MACH_COLIBRI) += colibri.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o -obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o -obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o -obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o +obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_EM_X270) += em-x270.o obj-$(CONFIG_MACH_MAGICIAN) += magician.o -obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o eseries_udc.o -obj-$(CONFIG_MACH_E740) += e740_lcd.o -obj-$(CONFIG_MACH_E750) += e750_lcd.o -obj-$(CONFIG_MACH_E400) += e400_lcd.o -obj-$(CONFIG_MACH_E800) += e800_lcd.o +obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o +obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o +obj-$(CONFIG_MACH_E330) += e330.o +obj-$(CONFIG_MACH_E350) += e350.o +obj-$(CONFIG_MACH_E740) += e740.o +obj-$(CONFIG_MACH_E750) += e750.o +obj-$(CONFIG_MACH_E400) += e400.o +obj-$(CONFIG_MACH_E800) += e800.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o +obj-$(CONFIG_MACH_PALMZ72) += palmz72.o +obj-$(CONFIG_ARCH_VIPER) += viper.o ifeq ($(CONFIG_MACH_ZYLONITE),y) obj-y += zylonite.o @@ -53,7 +64,8 @@ obj-$(CONFIG_MACH_LITTLETON) += littleton.o obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o obj-$(CONFIG_MACH_SAAR) += saar.o -obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o +obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o +obj-$(CONFIG_MACH_CM_X300) += cm-x300.o obj-$(CONFIG_PXA_EZX) += ezx.o # Support for blinky lights @@ -61,12 +73,11 @@ led-y := leds.o led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o -led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o obj-$(CONFIG_LEDS) += $(led-y) ifeq ($(CONFIG_PCI),y) -obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o +obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o endif obj-$(CONFIG_TOSA_BT) += tosa-bt.o diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c deleted file mode 100644 index 5c67b188a3b..00000000000 --- a/arch/arm/mach-pxa/akita-ioexp.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita) - * (uses a Maxim MAX7310 8 Port IO Expander) - * - * Copyright 2005 Openedhand Ltd. - * - * Author: Richard Purdie <richard@openedhand.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <linux/workqueue.h> -#include <mach/akita.h> - -/* MAX7310 Regiser Map */ -#define MAX7310_INPUT 0x00 -#define MAX7310_OUTPUT 0x01 -#define MAX7310_POLINV 0x02 -#define MAX7310_IODIR 0x03 /* 1 = Input, 0 = Output */ -#define MAX7310_TIMEOUT 0x04 - -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END }; - -/* I2C Magic */ -I2C_CLIENT_INSMOD; - -static int max7310_write(struct i2c_client *client, int address, int data); -static struct i2c_client max7310_template; -static void akita_ioexp_work(struct work_struct *private_); - -static struct device *akita_ioexp_device; -static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT; -DECLARE_WORK(akita_ioexp, akita_ioexp_work); - - -/* - * MAX7310 Access - */ -static int max7310_config(struct device *dev, int iomode, int polarity) -{ - int ret; - struct i2c_client *client = to_i2c_client(dev); - - ret = max7310_write(client, MAX7310_POLINV, polarity); - if (ret < 0) - return ret; - ret = max7310_write(client, MAX7310_IODIR, iomode); - return ret; -} - -static int max7310_set_ouputs(struct device *dev, int outputs) -{ - struct i2c_client *client = to_i2c_client(dev); - - return max7310_write(client, MAX7310_OUTPUT, outputs); -} - -/* - * I2C Functions - */ -static int max7310_write(struct i2c_client *client, int address, int value) -{ - u8 data[2]; - - data[0] = address & 0xff; - data[1] = value & 0xff; - - if (i2c_master_send(client, data, 2) == 2) - return 0; - return -1; -} - -static int max7310_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - int err; - - if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) - return -ENOMEM; - - max7310_template.adapter = adapter; - max7310_template.addr = address; - - memcpy(new_client, &max7310_template, sizeof(struct i2c_client)); - - if ((err = i2c_attach_client(new_client))) { - kfree(new_client); - return err; - } - - max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0); - akita_ioexp_device = &new_client->dev; - schedule_work(&akita_ioexp); - - return 0; -} - -static int max7310_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, max7310_detect); -} - -static int max7310_detach_client(struct i2c_client *client) -{ - int err; - - akita_ioexp_device = NULL; - - if ((err = i2c_detach_client(client))) - return err; - - kfree(client); - return 0; -} - -static struct i2c_driver max7310_i2c_driver = { - .driver = { - .name = "akita-max7310", - }, - .id = I2C_DRIVERID_AKITAIOEXP, - .attach_adapter = max7310_attach_adapter, - .detach_client = max7310_detach_client, -}; - -static struct i2c_client max7310_template = { - name: "akita-max7310", - driver: &max7310_i2c_driver, -}; - -void akita_set_ioexp(struct device *dev, unsigned char bit) -{ - ioexp_output_value |= bit; - - if (akita_ioexp_device) - schedule_work(&akita_ioexp); - return; -} - -void akita_reset_ioexp(struct device *dev, unsigned char bit) -{ - ioexp_output_value &= ~bit; - - if (akita_ioexp_device) - schedule_work(&akita_ioexp); - return; -} - -EXPORT_SYMBOL(akita_set_ioexp); -EXPORT_SYMBOL(akita_reset_ioexp); - -static void akita_ioexp_work(struct work_struct *private_) -{ - if (akita_ioexp_device) - max7310_set_ouputs(akita_ioexp_device, ioexp_output_value); -} - - -#ifdef CONFIG_PM -static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state) -{ - flush_scheduled_work(); - return 0; -} - -static int akita_ioexp_resume(struct platform_device *pdev) -{ - schedule_work(&akita_ioexp); - return 0; -} -#else -#define akita_ioexp_suspend NULL -#define akita_ioexp_resume NULL -#endif - -static int __init akita_ioexp_probe(struct platform_device *pdev) -{ - return i2c_add_driver(&max7310_i2c_driver); -} - -static int akita_ioexp_remove(struct platform_device *pdev) -{ - i2c_del_driver(&max7310_i2c_driver); - return 0; -} - -static struct platform_driver akita_ioexp_driver = { - .probe = akita_ioexp_probe, - .remove = akita_ioexp_remove, - .suspend = akita_ioexp_suspend, - .resume = akita_ioexp_resume, - .driver = { - .name = "akita-ioexp", - }, -}; - -static int __init akita_ioexp_init(void) -{ - return platform_driver_register(&akita_ioexp_driver); -} - -static void __exit akita_ioexp_exit(void) -{ - platform_driver_unregister(&akita_ioexp_driver); -} - -MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>"); -MODULE_DESCRIPTION("Akita IO-Expander driver"); -MODULE_LICENSE("GPL"); - -fs_initcall(akita_ioexp_init); -module_exit(akita_ioexp_exit); - diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c new file mode 100644 index 00000000000..b965085a37b --- /dev/null +++ b/arch/arm/mach-pxa/am200epd.c @@ -0,0 +1,374 @@ +/* + * am200epd.c -- Platform device for AM200 EPD kit + * + * Copyright (C) 2008, Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. + * + * This work was made possible by help and equipment support from E-Ink + * Corporation. http://support.eink.com/community + * + * This driver is written to be used with the Metronome display controller. + * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600 + * Vizplex EPD on a Gumstix board using the Lyre interface board. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/gpio.h> + +#include <mach/pxafb.h> + +#include <video/metronomefb.h> + +static unsigned int panel_type = 6; +static struct platform_device *am200_device; +static struct metronome_board am200_board; + +static struct pxafb_mode_info am200_fb_mode_9inch7 = { + .pixclock = 40000, + .xres = 1200, + .yres = 842, + .bpp = 16, + .hsync_len = 2, + .left_margin = 2, + .right_margin = 2, + .vsync_len = 1, + .upper_margin = 2, + .lower_margin = 25, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}; + +static struct pxafb_mode_info am200_fb_mode_8inch = { + .pixclock = 40000, + .xres = 1088, + .yres = 791, + .bpp = 16, + .hsync_len = 28, + .left_margin = 8, + .right_margin = 30, + .vsync_len = 8, + .upper_margin = 10, + .lower_margin = 8, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}; + +static struct pxafb_mode_info am200_fb_mode_6inch = { + .pixclock = 40189, + .xres = 832, + .yres = 622, + .bpp = 16, + .hsync_len = 28, + .left_margin = 34, + .right_margin = 34, + .vsync_len = 25, + .upper_margin = 0, + .lower_margin = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}; + +static struct pxafb_mach_info am200_fb_info = { + .modes = &am200_fb_mode_6inch, + .num_modes = 1, + .lcd_conn = LCD_TYPE_COLOR_TFT | LCD_PCLK_EDGE_FALL | + LCD_AC_BIAS_FREQ(24), +}; + +/* register offsets for gpio control */ +#define LED_GPIO_PIN 51 +#define STDBY_GPIO_PIN 48 +#define RST_GPIO_PIN 49 +#define RDY_GPIO_PIN 32 +#define ERR_GPIO_PIN 17 +#define PCBPWR_GPIO_PIN 16 +static int gpios[] = { LED_GPIO_PIN , STDBY_GPIO_PIN , RST_GPIO_PIN, + RDY_GPIO_PIN, ERR_GPIO_PIN, PCBPWR_GPIO_PIN }; +static char *gpio_names[] = { "LED" , "STDBY" , "RST", "RDY", "ERR", "PCBPWR" }; + +static int am200_init_gpio_regs(struct metronomefb_par *par) +{ + int i; + int err; + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + err = gpio_request(gpios[i], gpio_names[i]); + if (err) { + dev_err(&am200_device->dev, "failed requesting " + "gpio %s, err=%d\n", gpio_names[i], err); + goto err_req_gpio; + } + } + + gpio_direction_output(LED_GPIO_PIN, 0); + gpio_direction_output(STDBY_GPIO_PIN, 0); + gpio_direction_output(RST_GPIO_PIN, 0); + + gpio_direction_input(RDY_GPIO_PIN); + gpio_direction_input(ERR_GPIO_PIN); + + gpio_direction_output(PCBPWR_GPIO_PIN, 0); + + return 0; + +err_req_gpio: + while (i > 0) + gpio_free(gpios[i--]); + + return err; +} + +static void am200_cleanup(struct metronomefb_par *par) +{ + int i; + + free_irq(IRQ_GPIO(RDY_GPIO_PIN), par); + + for (i = 0; i < ARRAY_SIZE(gpios); i++) + gpio_free(gpios[i]); +} + +static int am200_share_video_mem(struct fb_info *info) +{ + /* rough check if this is our desired fb and not something else */ + if ((info->var.xres != am200_fb_info.modes->xres) + || (info->var.yres != am200_fb_info.modes->yres)) + return 0; + + /* we've now been notified that we have our new fb */ + am200_board.metromem = info->screen_base; + am200_board.host_fbinfo = info; + + /* try to refcount host drv since we are the consumer after this */ + if (!try_module_get(info->fbops->owner)) + return -ENODEV; + + return 0; +} + +static int am200_unshare_video_mem(struct fb_info *info) +{ + dev_dbg(&am200_device->dev, "ENTER %s\n", __func__); + + if (info != am200_board.host_fbinfo) + return 0; + + module_put(am200_board.host_fbinfo->fbops->owner); + return 0; +} + +static int am200_fb_notifier_callback(struct notifier_block *self, + unsigned long event, void *data) +{ + struct fb_event *evdata = data; + struct fb_info *info = evdata->info; + + dev_dbg(&am200_device->dev, "ENTER %s\n", __func__); + + if (event == FB_EVENT_FB_REGISTERED) + return am200_share_video_mem(info); + else if (event == FB_EVENT_FB_UNREGISTERED) + return am200_unshare_video_mem(info); + + return 0; +} + +static struct notifier_block am200_fb_notif = { + .notifier_call = am200_fb_notifier_callback, +}; + +/* this gets called as part of our init. these steps must be done now so + * that we can use set_pxa_fb_info */ +static void __init am200_presetup_fb(void) +{ + int fw; + int fh; + int padding_size; + int totalsize; + + switch (panel_type) { + case 6: + am200_fb_info.modes = &am200_fb_mode_6inch; + break; + case 8: + am200_fb_info.modes = &am200_fb_mode_8inch; + break; + case 97: + am200_fb_info.modes = &am200_fb_mode_9inch7; + break; + default: + dev_err(&am200_device->dev, "invalid panel_type selection," + " setting to 6\n"); + am200_fb_info.modes = &am200_fb_mode_6inch; + break; + } + + /* the frame buffer is divided as follows: + command | CRC | padding + 16kb waveform data | CRC | padding + image data | CRC + */ + + fw = am200_fb_info.modes->xres; + fh = am200_fb_info.modes->yres; + + /* waveform must be 16k + 2 for checksum */ + am200_board.wfm_size = roundup(16*1024 + 2, fw); + + padding_size = PAGE_SIZE + (4 * fw); + + /* total is 1 cmd , 1 wfm, padding and image */ + totalsize = fw + am200_board.wfm_size + padding_size + (fw*fh); + + /* save this off because we're manipulating fw after this and + * we'll need it when we're ready to setup the framebuffer */ + am200_board.fw = fw; + am200_board.fh = fh; + + /* the reason we do this adjustment is because we want to acquire + * more framebuffer memory without imposing custom awareness on the + * underlying pxafb driver */ + am200_fb_info.modes->yres = DIV_ROUND_UP(totalsize, fw); + + /* we divide since we told the LCD controller we're 16bpp */ + am200_fb_info.modes->xres /= 2; + + set_pxa_fb_info(&am200_fb_info); + +} + +/* this gets called by metronomefb as part of its init, in our case, we + * have already completed initial framebuffer init in presetup_fb so we + * can just setup the fb access pointers */ +static int am200_setup_fb(struct metronomefb_par *par) +{ + int fw; + int fh; + + fw = am200_board.fw; + fh = am200_board.fh; + + /* metromem was set up by the notifier in share_video_mem so now + * we can use its value to calculate the other entries */ + par->metromem_cmd = (struct metromem_cmd *) am200_board.metromem; + par->metromem_wfm = am200_board.metromem + fw; + par->metromem_img = par->metromem_wfm + am200_board.wfm_size; + par->metromem_img_csum = (u16 *) (par->metromem_img + (fw * fh)); + par->metromem_dma = am200_board.host_fbinfo->fix.smem_start; + + return 0; +} + +static int am200_get_panel_type(void) +{ + return panel_type; +} + +static irqreturn_t am200_handle_irq(int irq, void *dev_id) +{ + struct metronomefb_par *par = dev_id; + + wake_up_interruptible(&par->waitq); + return IRQ_HANDLED; +} + +static int am200_setup_irq(struct fb_info *info) +{ + int ret; + + ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq, + IRQF_DISABLED|IRQF_TRIGGER_FALLING, + "AM200", info->par); + if (ret) + dev_err(&am200_device->dev, "request_irq failed: %d\n", ret); + + return ret; +} + +static void am200_set_rst(struct metronomefb_par *par, int state) +{ + gpio_set_value(RST_GPIO_PIN, state); +} + +static void am200_set_stdby(struct metronomefb_par *par, int state) +{ + gpio_set_value(STDBY_GPIO_PIN, state); +} + +static int am200_wait_event(struct metronomefb_par *par) +{ + return wait_event_timeout(par->waitq, gpio_get_value(RDY_GPIO_PIN), HZ); +} + +static int am200_wait_event_intr(struct metronomefb_par *par) +{ + return wait_event_interruptible_timeout(par->waitq, + gpio_get_value(RDY_GPIO_PIN), HZ); +} + +static struct metronome_board am200_board = { + .owner = THIS_MODULE, + .setup_irq = am200_setup_irq, + .setup_io = am200_init_gpio_regs, + .setup_fb = am200_setup_fb, + .set_rst = am200_set_rst, + .set_stdby = am200_set_stdby, + .met_wait_event = am200_wait_event, + .met_wait_event_intr = am200_wait_event_intr, + .get_panel_type = am200_get_panel_type, + .cleanup = am200_cleanup, +}; + +static int __init am200_init(void) +{ + int ret; + + /* before anything else, we request notification for any fb + * creation events */ + fb_register_client(&am200_fb_notif); + + /* request our platform independent driver */ + request_module("metronomefb"); + + am200_device = platform_device_alloc("metronomefb", -1); + if (!am200_device) + return -ENOMEM; + + /* the am200_board that will be seen by metronomefb is a copy */ + platform_device_add_data(am200_device, &am200_board, + sizeof(am200_board)); + + /* this _add binds metronomefb to am200. metronomefb refcounts am200 */ + ret = platform_device_add(am200_device); + + if (ret) { + platform_device_put(am200_device); + fb_unregister_client(&am200_fb_notif); + return ret; + } + + am200_presetup_fb(); + + return 0; +} + +module_param(panel_type, uint, 0); +MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97"); + +module_init(am200_init); + +MODULE_DESCRIPTION("board driver for am200 metronome epd kit"); +MODULE_AUTHOR("Jaya Kumar"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c new file mode 100644 index 00000000000..83a4cdf0817 --- /dev/null +++ b/arch/arm/mach-pxa/cm-x255.c @@ -0,0 +1,258 @@ +/* + * linux/arch/arm/mach-pxa/cm-x255.c + * + * Copyright (C) 2007, 2008 CompuLab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand-gpio.h> + +#include <linux/spi/spi.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa25x.h> +#include <mach/pxa2xx_spi.h> +#include <mach/bitfield.h> + +#include "generic.h" + +#define GPIO_NAND_CS (5) +#define GPIO_NAND_ALE (4) +#define GPIO_NAND_CLE (3) +#define GPIO_NAND_RB (10) + +static unsigned long cmx255_pin_config[] = { + /* AC'97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* SSP1 */ + GPIO23_SSP1_SCLK, + GPIO24_SSP1_SFRM, + GPIO25_SSP1_TXD, + GPIO26_SSP1_RXD, + + /* SSP2 */ + GPIO81_SSP2_CLK_OUT, + GPIO82_SSP2_FRM_OUT, + GPIO83_SSP2_TXD, + GPIO84_SSP2_RXD, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* SDRAM and local bus */ + GPIO15_nCS_1, + GPIO78_nCS_2, + GPIO79_nCS_3, + GPIO80_nCS_4, + GPIO33_nCS_5, + GPIO18_RDY, + + /* GPIO */ + GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, + GPIO9_GPIO, /* PC card reset */ + + /* NAND controls */ + GPIO5_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ + GPIO4_GPIO | MFP_LPM_DRIVE_LOW, /* NAND ALE */ + GPIO3_GPIO | MFP_LPM_DRIVE_LOW, /* NAND CLE */ + GPIO10_GPIO, /* NAND Ready/Busy */ + + /* interrupts */ + GPIO22_GPIO, /* DM9000 interrupt */ +}; + +#if defined(CONFIG_SPI_PXA2XX) +static struct pxa2xx_spi_master pxa_ssp_master_info = { + .num_chipselect = 1, +}; + +static struct spi_board_info spi_board_info[] __initdata = { + [0] = { + .modalias = "rtc-max6902", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + }, +}; + +static void __init cmx255_init_rtc(void) +{ + pxa2xx_set_spi_info(1, &pxa_ssp_master_info); + spi_register_board_info(ARRAY_AND_SIZE(spi_board_info)); +} +#else +static inline void cmx255_init_rtc(void) {} +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition cmx255_nor_partitions[] = { + { + .name = "ARMmon", + .size = 0x00030000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + } , { + .name = "ARMmon setup block", + .size = 0x00010000, + .offset = MTDPART_OFS_APPEND, + .mask_flags = MTD_WRITEABLE /* force read-only */ + } , { + .name = "kernel", + .size = 0x00160000, + .offset = MTDPART_OFS_APPEND, + } , { + .name = "ramdisk", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND + } +}; + +static struct physmap_flash_data cmx255_nor_flash_data[] = { + { + .width = 2, /* bankwidth in bytes */ + .parts = cmx255_nor_partitions, + .nr_parts = ARRAY_SIZE(cmx255_nor_partitions) + } +}; + +static struct resource cmx255_nor_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device cmx255_nor = { + .name = "physmap-flash", + .id = -1, + .dev = { + .platform_data = cmx255_nor_flash_data, + }, + .resource = &cmx255_nor_resource, + .num_resources = 1, +}; + +static void __init cmx255_init_nor(void) +{ + platform_device_register(&cmx255_nor); +} +#else +static inline void cmx255_init_nor(void) {} +#endif + +#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE) +static struct resource cmx255_nand_resource[] = { + [0] = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + 11, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS5_PHYS, + .end = PXA_CS5_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition cmx255_nand_parts[] = { + [0] = { + .name = "cmx255-nand", + .size = MTDPART_SIZ_FULL, + .offset = 0, + }, +}; + +static struct gpio_nand_platdata cmx255_nand_platdata = { + .gpio_nce = GPIO_NAND_CS, + .gpio_cle = GPIO_NAND_CLE, + .gpio_ale = GPIO_NAND_ALE, + .gpio_rdy = GPIO_NAND_RB, + .gpio_nwp = -1, + .parts = cmx255_nand_parts, + .num_parts = ARRAY_SIZE(cmx255_nand_parts), + .chip_delay = 25, +}; + +static struct platform_device cmx255_nand = { + .name = "gpio-nand", + .num_resources = ARRAY_SIZE(cmx255_nand_resource), + .resource = cmx255_nand_resource, + .id = -1, + .dev = { + .platform_data = &cmx255_nand_platdata, + } +}; + +static void __init cmx255_init_nand(void) +{ + platform_device_register(&cmx255_nand); +} +#else +static inline void cmx255_init_nand(void) {} +#endif + +void __init cmx255_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config)); + + cmx255_init_rtc(); + cmx255_init_nor(); + cmx255_init_nand(); +} diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h deleted file mode 100644 index 48f532f4cb5..00000000000 --- a/arch/arm/mach-pxa/cm-x270-pci.h +++ /dev/null @@ -1,13 +0,0 @@ -extern void __cmx270_pci_init_irq(int irq_gpio); -extern void __cmx270_pci_suspend(void); -extern void __cmx270_pci_resume(void); - -#ifdef CONFIG_PCI -#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x) -#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x) -#define cmx270_pci_resume(x) __cmx270_pci_resume(x) -#else -#define cmx270_pci_init_irq(x) do {} while (0) -#define cmx270_pci_suspend(x) do {} while (0) -#define cmx270_pci_resume(x) do {} while (0) -#endif diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index af003a26953..a82dad1a8cc 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -14,46 +14,22 @@ #include <linux/irq.h> #include <linux/gpio.h> -#include <linux/dm9000.h> #include <linux/rtc-v3020.h> #include <video/mbxfb.h> -#include <linux/leds.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> - -#include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa27x.h> -#include <mach/pxa-regs.h> -#include <mach/audio.h> -#include <mach/pxafb.h> #include <mach/ohci.h> #include <mach/mmc.h> -#include <mach/bitfield.h> - -#include <asm/hardware/it8152.h> #include "generic.h" -#include "cm-x270-pci.h" - -/* virtual addresses for statically mapped regions */ -#define CMX270_VIRT_BASE (0xe8000000) -#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) +/* physical address if local-bus attached devices */ #define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22)) -#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22)) /* GPIO IRQ usage */ -#define GPIO10_ETHIRQ (10) -#define GPIO22_IT8152_IRQ (22) #define GPIO83_MMC_IRQ (83) -#define GPIO95_GFXIRQ (95) -#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ) -#define CMX270_IT8152_IRQ IRQ_GPIO(GPIO22_IT8152_IRQ) #define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ) -#define CMX270_GFXIRQ IRQ_GPIO(GPIO95_GFXIRQ) /* MMC power enable */ #define GPIO105_MMC_POWER (105) @@ -157,62 +133,6 @@ static unsigned long cmx270_pin_config[] = { GPIO83_GPIO, /* MMC card detect */ }; -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) -static struct resource cmx270_dm9000_resource[] = { - [0] = { - .start = DM9000_PHYS_BASE, - .end = DM9000_PHYS_BASE + 4, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DM9000_PHYS_BASE + 8, - .end = DM9000_PHYS_BASE + 8 + 500, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = CMX270_ETHIRQ, - .end = CMX270_ETHIRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct dm9000_plat_data cmx270_dm9000_platdata = { - .flags = DM9000_PLATF_32BITONLY, -}; - -static struct platform_device cmx270_dm9000_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(cmx270_dm9000_resource), - .resource = cmx270_dm9000_resource, - .dev = { - .platform_data = &cmx270_dm9000_platdata, - } -}; - -static void __init cmx270_init_dm9000(void) -{ - platform_device_register(&cmx270_dm9000_device); -} -#else -static inline void cmx270_init_dm9000(void) {} -#endif - -/* UCB1400 touchscreen controller */ -#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) -static struct platform_device cmx270_ts_device = { - .name = "ucb1400_ts", - .id = -1, -}; - -static void __init cmx270_init_touchscreen(void) -{ - platform_device_register(&cmx270_ts_device); -} -#else -static inline void cmx270_init_touchscreen(void) {} -#endif - /* V3020 RTC */ #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) static struct resource cmx270_v3020_resource[] = { @@ -242,45 +162,7 @@ static void __init cmx270_init_rtc(void) platform_device_register(&cmx270_rtc_device); } #else -static inline void cmx270_init_rtc(void) {} -#endif - -/* CM-X270 LEDs */ -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -static struct gpio_led cmx270_leds[] = { - [0] = { - .name = "cm-x270:red", - .default_trigger = "nand-disk", - .gpio = 93, - .active_low = 1, - }, - [1] = { - .name = "cm-x270:green", - .default_trigger = "heartbeat", - .gpio = 94, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data cmx270_gpio_led_pdata = { - .num_leds = ARRAY_SIZE(cmx270_leds), - .leds = cmx270_leds, -}; - -static struct platform_device cmx270_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &cmx270_gpio_led_pdata, - }, -}; - -static void __init cmx270_init_leds(void) -{ - platform_device_register(&cmx270_led_device); -} -#else -static inline void cmx270_init_leds(void) {} +static inline void cmx2xx_init_rtc(void) {} #endif /* 2700G graphics */ @@ -373,238 +255,11 @@ static void __init cmx270_init_2700G(void) static inline void cmx270_init_2700G(void) {} #endif -#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) -/* - Display definitions - keep these for backwards compatibility, although symbolic names (as - e.g. in lpd270.c) looks better -*/ -#define MTYPE_STN320x240 0 -#define MTYPE_TFT640x480 1 -#define MTYPE_CRT640x480 2 -#define MTYPE_CRT800x600 3 -#define MTYPE_TFT320x240 6 -#define MTYPE_STN640x480 7 - -static struct pxafb_mode_info generic_stn_320x240_mode = { - .pixclock = 76923, - .bpp = 8, - .xres = 320, - .yres = 240, - .hsync_len = 3, - .vsync_len = 2, - .left_margin = 3, - .upper_margin = 0, - .right_margin = 3, - .lower_margin = 0, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_stn_320x240 = { - .modes = &generic_stn_320x240_mode, - .num_modes = 1, - .lccr0 = 0, - .lccr3 = (LCCR3_PixClkDiv(0x03) | - LCCR3_Acb(0xff) | - LCCR3_PCP), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_tft_640x480_mode = { - .pixclock = 38461, - .bpp = 8, - .xres = 640, - .yres = 480, - .hsync_len = 60, - .vsync_len = 2, - .left_margin = 70, - .upper_margin = 10, - .right_margin = 70, - .lower_margin = 5, - .sync = 0, - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_tft_640x480 = { - .modes = &generic_tft_640x480_mode, - .num_modes = 1, - .lccr0 = (LCCR0_PAS), - .lccr3 = (LCCR3_PixClkDiv(0x01) | - LCCR3_Acb(0xff) | - LCCR3_PCP), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_crt_640x480_mode = { - .pixclock = 38461, - .bpp = 8, - .xres = 640, - .yres = 480, - .hsync_len = 63, - .vsync_len = 2, - .left_margin = 81, - .upper_margin = 33, - .right_margin = 16, - .lower_margin = 10, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_crt_640x480 = { - .modes = &generic_crt_640x480_mode, - .num_modes = 1, - .lccr0 = (LCCR0_PAS), - .lccr3 = (LCCR3_PixClkDiv(0x01) | - LCCR3_Acb(0xff)), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_crt_800x600_mode = { - .pixclock = 28846, - .bpp = 8, - .xres = 800, - .yres = 600, - .hsync_len = 63, - .vsync_len = 2, - .left_margin = 26, - .upper_margin = 21, - .right_margin = 26, - .lower_margin = 11, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_crt_800x600 = { - .modes = &generic_crt_800x600_mode, - .num_modes = 1, - .lccr0 = (LCCR0_PAS), - .lccr3 = (LCCR3_PixClkDiv(0x02) | - LCCR3_Acb(0xff)), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_tft_320x240_mode = { - .pixclock = 134615, - .bpp = 16, - .xres = 320, - .yres = 240, - .hsync_len = 63, - .vsync_len = 7, - .left_margin = 75, - .upper_margin = 0, - .right_margin = 15, - .lower_margin = 15, - .sync = 0, - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_tft_320x240 = { - .modes = &generic_tft_320x240_mode, - .num_modes = 1, - .lccr0 = (LCCR0_PAS), - .lccr3 = (LCCR3_PixClkDiv(0x06) | - LCCR3_Acb(0xff) | - LCCR3_PCP), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_stn_640x480_mode = { - .pixclock = 57692, - .bpp = 8, - .xres = 640, - .yres = 480, - .hsync_len = 4, - .vsync_len = 2, - .left_margin = 10, - .upper_margin = 5, - .right_margin = 10, - .lower_margin = 5, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_stn_640x480 = { - .modes = &generic_stn_640x480_mode, - .num_modes = 1, - .lccr0 = 0, - .lccr3 = (LCCR3_PixClkDiv(0x02) | - LCCR3_Acb(0xff)), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480; - -static int __init cmx270_set_display(char *str) -{ - int disp_type = simple_strtol(str, NULL, 0); - switch (disp_type) { - case MTYPE_STN320x240: - cmx270_display = &generic_stn_320x240; - break; - case MTYPE_TFT640x480: - cmx270_display = &generic_tft_640x480; - break; - case MTYPE_CRT640x480: - cmx270_display = &generic_crt_640x480; - break; - case MTYPE_CRT800x600: - cmx270_display = &generic_crt_800x600; - break; - case MTYPE_TFT320x240: - cmx270_display = &generic_tft_320x240; - break; - case MTYPE_STN640x480: - cmx270_display = &generic_stn_640x480; - break; - default: /* fallback to CRT 640x480 */ - cmx270_display = &generic_crt_640x480; - break; - } - return 1; -} - -/* - This should be done really early to get proper configuration for - frame buffer. - Indeed, pxafb parameters can be used istead, but CM-X270 bootloader - has limitied line length for kernel command line, and also it will - break compatibitlty with proprietary releases already in field. -*/ -__setup("monitor=", cmx270_set_display); - -static void __init cmx270_init_display(void) -{ - set_pxa_fb_info(cmx270_display); -} -#else -static inline void cmx270_init_display(void) {} -#endif - /* PXA27x OHCI controller setup */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static int cmx270_ohci_init(struct device *dev) -{ - /* Set the Power Control Polarity Low */ - UHCHR = (UHCHR | UHCHR_PCPL) & - ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); - - return 0; -} - static struct pxaohci_platform_data cmx270_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, - .init = cmx270_ohci_init, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, }; static void __init cmx270_init_ohci(void) @@ -676,131 +331,12 @@ static void __init cmx270_init_mmc(void) static inline void cmx270_init_mmc(void) {} #endif -#ifdef CONFIG_PM -static unsigned long sleep_save_msc[10]; - -static int cmx270_suspend(struct sys_device *dev, pm_message_t state) -{ - cmx270_pci_suspend(); - - /* save MSC registers */ - sleep_save_msc[0] = MSC0; - sleep_save_msc[1] = MSC1; - sleep_save_msc[2] = MSC2; - - /* setup power saving mode registers */ - PCFR = 0x0; - PSLR = 0xff400000; - PMCR = 0x00000005; - PWER = 0x80000000; - PFER = 0x00000000; - PRER = 0x00000000; - PGSR0 = 0xC0018800; - PGSR1 = 0x004F0002; - PGSR2 = 0x6021C000; - PGSR3 = 0x00020000; - - return 0; -} - -static int cmx270_resume(struct sys_device *dev) -{ - cmx270_pci_resume(); - - /* restore MSC registers */ - MSC0 = sleep_save_msc[0]; - MSC1 = sleep_save_msc[1]; - MSC2 = sleep_save_msc[2]; - - return 0; -} - -static struct sysdev_class cmx270_pm_sysclass = { - .name = "pm", - .resume = cmx270_resume, - .suspend = cmx270_suspend, -}; - -static struct sys_device cmx270_pm_device = { - .cls = &cmx270_pm_sysclass, -}; - -static int __init cmx270_pm_init(void) -{ - int error; - error = sysdev_class_register(&cmx270_pm_sysclass); - if (error == 0) - error = sysdev_register(&cmx270_pm_device); - return error; -} -#else -static int __init cmx270_pm_init(void) { return 0; } -#endif - -#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) -static void __init cmx270_init_ac97(void) -{ - pxa_set_ac97_info(NULL); -} -#else -static inline void cmx270_init_ac97(void) {} -#endif - -static void __init cmx270_init(void) +void __init cmx270_init(void) { - cmx270_pm_init(); - pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config)); - cmx270_init_dm9000(); cmx270_init_rtc(); - cmx270_init_display(); cmx270_init_mmc(); cmx270_init_ohci(); - cmx270_init_ac97(); - cmx270_init_touchscreen(); - cmx270_init_leds(); cmx270_init_2700G(); } - -static void __init cmx270_init_irq(void) -{ - pxa27x_init_irq(); - - cmx270_pci_init_irq(GPIO22_IT8152_IRQ); -} - -#ifdef CONFIG_PCI -/* Map PCI companion statically */ -static struct map_desc cmx270_io_desc[] __initdata = { - [0] = { /* PCI bridge */ - .virtual = CMX270_IT8152_VIRT, - .pfn = __phys_to_pfn(PXA_CS4_PHYS), - .length = SZ_64M, - .type = MT_DEVICE - }, -}; - -static void __init cmx270_map_io(void) -{ - pxa_map_io(); - iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc)); - - it8152_base_address = CMX270_IT8152_VIRT; -} -#else -static void __init cmx270_map_io(void) -{ - pxa_map_io(); -} -#endif - -MACHINE_START(ARMCORE, "Compulab CM-x270") - .boot_params = 0xa0000100, - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .map_io = cmx270_map_io, - .init_irq = cmx270_init_irq, - .timer = &pxa_timer, - .init_machine = cmx270_init, -MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 2d5bcea1e52..3156b25f6e9 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-pxa/cm-x270-pci.c + * linux/arch/arm/mach-pxa/cm-x2xx-pci.c * * PCI bios-type initialisation for PCI machines * @@ -28,7 +28,7 @@ #include <asm/hardware/it8152.h> unsigned long it8152_base_address; -static int cmx270_it8152_irq_gpio; +static int cmx2xx_it8152_irq_gpio; /* * Only first 64MB of memory can be accessed via PCI. @@ -36,13 +36,13 @@ static int cmx270_it8152_irq_gpio; * This is really ugly and we need a better way of specifying * DMA-capable regions of memory. */ -void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, +void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) { unsigned int sz = SZ_64M >> PAGE_SHIFT; if (machine_is_armcore()) { - pr_info("Adjusting zones for CM-X270\n"); + pr_info("Adjusting zones for CM-X2XX\n"); /* * Only adjust if > 64M on current system @@ -57,29 +57,29 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, } } -static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) +static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) { /* clear our parent irq */ - GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio); + GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio); it8152_irq_demux(irq, desc); } -void __cmx270_pci_init_irq(int irq_gpio) +void __cmx2xx_pci_init_irq(int irq_gpio) { it8152_init_irq(); - cmx270_it8152_irq_gpio = irq_gpio; + cmx2xx_it8152_irq_gpio = irq_gpio; set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); - set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux); + set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx2xx_it8152_irq_demux); } #ifdef CONFIG_PM static unsigned long sleep_save_ite[10]; -void __cmx270_pci_suspend(void) +void __cmx2xx_pci_suspend(void) { /* save ITE state */ sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR); @@ -91,7 +91,7 @@ void __cmx270_pci_suspend(void) __raw_writel((0), IT8152_INTC_LPCNIRR); } -void __cmx270_pci_resume(void) +void __cmx2xx_pci_resume(void) { /* restore IT8152 state */ __raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR); @@ -99,12 +99,12 @@ void __cmx270_pci_resume(void) __raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR); } #else -void cmx270_pci_suspend(void) {} -void cmx270_pci_resume(void) {} +void cmx2xx_pci_suspend(void) {} +void cmx2xx_pci_resume(void) {} #endif /* PCI IRQ mapping*/ -static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -116,14 +116,14 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* Here comes the ugly part. The routing is baseboard specific, - but defining a platform for each possible base of CM-X270 is - unrealistic. Here we keep mapping for ATXBase and SB-X270. + but defining a platform for each possible base of CM-X2XX is + unrealistic. Here we keep mapping for ATXBase and SB-X2XX. */ /* ATXBASE PCI slot */ if (slot == 7) return IT8152_PCI_INTA; - /* ATXBase/SB-x270 CardBus */ + /* ATXBase/SB-X2XX CardBus */ if (slot == 8 || slot == 0) return IT8152_PCI_INTB; @@ -131,7 +131,11 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) if (slot == 9) return IT8152_PCI_INTA; - /* SB-x270 Ethernet */ + /* CM-x255 Onboard Ethernet */ + if (slot == 15) + return IT8152_PCI_INTC; + + /* SB-x2xx Ethernet */ if (slot == 16) return IT8152_PCI_INTA; @@ -144,9 +148,9 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) return(0); } -static void cmx270_pci_preinit(void) +static void cmx2xx_pci_preinit(void) { - pr_info("Initializing CM-X270 PCI subsystem\n"); + pr_info("Initializing CM-X2XX PCI subsystem\n"); __raw_writel(0x800, IT8152_PCI_CFG_ADDR); if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) { @@ -200,21 +204,21 @@ static void cmx270_pci_preinit(void) } } -static struct hw_pci cmx270_pci __initdata = { +static struct hw_pci cmx2xx_pci __initdata = { .swizzle = pci_std_swizzle, - .map_irq = cmx270_pci_map_irq, + .map_irq = cmx2xx_pci_map_irq, .nr_controllers = 1, .setup = it8152_pci_setup, .scan = it8152_pci_scan_bus, - .preinit = cmx270_pci_preinit, + .preinit = cmx2xx_pci_preinit, }; -static int __init cmx270_init_pci(void) +static int __init cmx2xx_init_pci(void) { if (machine_is_armcore()) - pci_common_init(&cmx270_pci); + pci_common_init(&cmx2xx_pci); return 0; } -subsys_initcall(cmx270_init_pci); +subsys_initcall(cmx2xx_init_pci); diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.h b/arch/arm/mach-pxa/cm-x2xx-pci.h new file mode 100644 index 00000000000..e24aad2e3ad --- /dev/null +++ b/arch/arm/mach-pxa/cm-x2xx-pci.h @@ -0,0 +1,13 @@ +extern void __cmx2xx_pci_init_irq(int irq_gpio); +extern void __cmx2xx_pci_suspend(void); +extern void __cmx2xx_pci_resume(void); + +#ifdef CONFIG_PCI +#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x) +#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x) +#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x) +#else +#define cmx2xx_pci_init_irq(x) do {} while (0) +#define cmx2xx_pci_suspend(x) do {} while (0) +#define cmx2xx_pci_resume(x) do {} while (0) +#endif diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c new file mode 100644 index 00000000000..0b3ce3b6d89 --- /dev/null +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -0,0 +1,531 @@ +/* + * linux/arch/arm/mach-pxa/cm-x2xx.c + * + * Copyright (C) 2008 CompuLab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/irq.h> +#include <linux/gpio.h> + +#include <linux/dm9000.h> +#include <linux/leds.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa27x.h> +#include <mach/pxa-regs.h> +#include <mach/audio.h> +#include <mach/pxafb.h> + +#include <asm/hardware/it8152.h> + +#include "generic.h" +#include "cm-x2xx-pci.h" + +extern void cmx255_init(void); +extern void cmx270_init(void); + +/* virtual addresses for statically mapped regions */ +#define CMX2XX_VIRT_BASE (0xe8000000) +#define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE) + +/* physical address if local-bus attached devices */ +#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22)) +#define CMX270_DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22)) + +/* leds */ +#define CMX255_GPIO_RED (27) +#define CMX255_GPIO_GREEN (32) +#define CMX270_GPIO_RED (93) +#define CMX270_GPIO_GREEN (94) + +/* GPIO IRQ usage */ +#define GPIO22_ETHIRQ (22) +#define GPIO10_ETHIRQ (10) +#define CMX255_GPIO_IT8152_IRQ (0) +#define CMX270_GPIO_IT8152_IRQ (22) + +#define CMX255_ETHIRQ IRQ_GPIO(GPIO22_ETHIRQ) +#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ) + +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource cmx255_dm9000_resource[] = { + [0] = { + .start = CMX255_DM9000_PHYS_BASE, + .end = CMX255_DM9000_PHYS_BASE + 3, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CMX255_DM9000_PHYS_BASE + 4, + .end = CMX255_DM9000_PHYS_BASE + 4 + 500, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = CMX255_ETHIRQ, + .end = CMX255_ETHIRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct resource cmx270_dm9000_resource[] = { + [0] = { + .start = CMX270_DM9000_PHYS_BASE, + .end = CMX270_DM9000_PHYS_BASE + 3, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CMX270_DM9000_PHYS_BASE + 8, + .end = CMX270_DM9000_PHYS_BASE + 8 + 500, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = CMX270_ETHIRQ, + .end = CMX270_ETHIRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct dm9000_plat_data cmx270_dm9000_platdata = { + .flags = DM9000_PLATF_32BITONLY, +}; + +static struct platform_device cmx2xx_dm9000_device = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(cmx270_dm9000_resource), + .dev = { + .platform_data = &cmx270_dm9000_platdata, + } +}; + +static void __init cmx2xx_init_dm9000(void) +{ + if (cpu_is_pxa25x()) + cmx2xx_dm9000_device.resource = cmx255_dm9000_resource; + else + cmx2xx_dm9000_device.resource = cmx270_dm9000_resource; + platform_device_register(&cmx2xx_dm9000_device); +} +#else +static inline void cmx2xx_init_dm9000(void) {} +#endif + +/* UCB1400 touchscreen controller */ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static struct platform_device cmx2xx_ts_device = { + .name = "ucb1400_ts", + .id = -1, +}; + +static void __init cmx2xx_init_touchscreen(void) +{ + platform_device_register(&cmx2xx_ts_device); +} +#else +static inline void cmx2xx_init_touchscreen(void) {} +#endif + +/* CM-X270 LEDs */ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static struct gpio_led cmx2xx_leds[] = { + [0] = { + .name = "cm-x2xx:red", + .default_trigger = "nand-disk", + .active_low = 1, + }, + [1] = { + .name = "cm-x2xx:green", + .default_trigger = "heartbeat", + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = { + .num_leds = ARRAY_SIZE(cmx2xx_leds), + .leds = cmx2xx_leds, +}; + +static struct platform_device cmx2xx_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &cmx2xx_gpio_led_pdata, + }, +}; + +static void __init cmx2xx_init_leds(void) +{ + if (cpu_is_pxa25x()) { + cmx2xx_leds[0].gpio = CMX255_GPIO_RED; + cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN; + } else { + cmx2xx_leds[0].gpio = CMX270_GPIO_RED; + cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN; + } + platform_device_register(&cmx2xx_led_device); +} +#else +static inline void cmx2xx_init_leds(void) {} +#endif + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +/* + Display definitions + keep these for backwards compatibility, although symbolic names (as + e.g. in lpd270.c) looks better +*/ +#define MTYPE_STN320x240 0 +#define MTYPE_TFT640x480 1 +#define MTYPE_CRT640x480 2 +#define MTYPE_CRT800x600 3 +#define MTYPE_TFT320x240 6 +#define MTYPE_STN640x480 7 + +static struct pxafb_mode_info generic_stn_320x240_mode = { + .pixclock = 76923, + .bpp = 8, + .xres = 320, + .yres = 240, + .hsync_len = 3, + .vsync_len = 2, + .left_margin = 3, + .upper_margin = 0, + .right_margin = 3, + .lower_margin = 0, + .sync = (FB_SYNC_HOR_HIGH_ACT | + FB_SYNC_VERT_HIGH_ACT), + .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info generic_stn_320x240 = { + .modes = &generic_stn_320x240_mode, + .num_modes = 1, + .lccr0 = 0, + .lccr3 = (LCCR3_PixClkDiv(0x03) | + LCCR3_Acb(0xff) | + LCCR3_PCP), + .cmap_inverse = 0, + .cmap_static = 0, +}; + +static struct pxafb_mode_info generic_tft_640x480_mode = { + .pixclock = 38461, + .bpp = 8, + .xres = 640, + .yres = 480, + .hsync_len = 60, + .vsync_len = 2, + .left_margin = 70, + .upper_margin = 10, + .right_margin = 70, + .lower_margin = 5, + .sync = 0, + .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info generic_tft_640x480 = { + .modes = &generic_tft_640x480_mode, + .num_modes = 1, + .lccr0 = (LCCR0_PAS), + .lccr3 = (LCCR3_PixClkDiv(0x01) | + LCCR3_Acb(0xff) | + LCCR3_PCP), + .cmap_inverse = 0, + .cmap_static = 0, +}; + +static struct pxafb_mode_info generic_crt_640x480_mode = { + .pixclock = 38461, + .bpp = 8, + .xres = 640, + .yres = 480, + .hsync_len = 63, + .vsync_len = 2, + .left_margin = 81, + .upper_margin = 33, + .right_margin = 16, + .lower_margin = 10, + .sync = (FB_SYNC_HOR_HIGH_ACT | + FB_SYNC_VERT_HIGH_ACT), + .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info generic_crt_640x480 = { + .modes = &generic_crt_640x480_mode, + .num_modes = 1, + .lccr0 = (LCCR0_PAS), + .lccr3 = (LCCR3_PixClkDiv(0x01) | + LCCR3_Acb(0xff)), + .cmap_inverse = 0, + .cmap_static = 0, +}; + +static struct pxafb_mode_info generic_crt_800x600_mode = { + .pixclock = 28846, + .bpp = 8, + .xres = 800, + .yres = 600, + .hsync_len = 63, + .vsync_len = 2, + .left_margin = 26, + .upper_margin = 21, + .right_margin = 26, + .lower_margin = 11, + .sync = (FB_SYNC_HOR_HIGH_ACT | + FB_SYNC_VERT_HIGH_ACT), + .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info generic_crt_800x600 = { + .modes = &generic_crt_800x600_mode, + .num_modes = 1, + .lccr0 = (LCCR0_PAS), + .lccr3 = (LCCR3_PixClkDiv(0x02) | + LCCR3_Acb(0xff)), + .cmap_inverse = 0, + .cmap_static = 0, +}; + +static struct pxafb_mode_info generic_tft_320x240_mode = { + .pixclock = 134615, + .bpp = 16, + .xres = 320, + .yres = 240, + .hsync_len = 63, + .vsync_len = 7, + .left_margin = 75, + .upper_margin = 0, + .right_margin = 15, + .lower_margin = 15, + .sync = 0, + .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info generic_tft_320x240 = { + .modes = &generic_tft_320x240_mode, + .num_modes = 1, + .lccr0 = (LCCR0_PAS), + .lccr3 = (LCCR3_PixClkDiv(0x06) | + LCCR3_Acb(0xff) | + LCCR3_PCP), + .cmap_inverse = 0, + .cmap_static = 0, +}; + +static struct pxafb_mode_info generic_stn_640x480_mode = { + .pixclock = 57692, + .bpp = 8, + .xres = 640, + .yres = 480, + .hsync_len = 4, + .vsync_len = 2, + .left_margin = 10, + .upper_margin = 5, + .right_margin = 10, + .lower_margin = 5, + .sync = (FB_SYNC_HOR_HIGH_ACT | + FB_SYNC_VERT_HIGH_ACT), + .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info generic_stn_640x480 = { + .modes = &generic_stn_640x480_mode, + .num_modes = 1, + .lccr0 = 0, + .lccr3 = (LCCR3_PixClkDiv(0x02) | + LCCR3_Acb(0xff)), + .cmap_inverse = 0, + .cmap_static = 0, +}; + +static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480; + +static int __init cmx2xx_set_display(char *str) +{ + int disp_type = simple_strtol(str, NULL, 0); + switch (disp_type) { + case MTYPE_STN320x240: + cmx2xx_display = &generic_stn_320x240; + break; + case MTYPE_TFT640x480: + cmx2xx_display = &generic_tft_640x480; + break; + case MTYPE_CRT640x480: + cmx2xx_display = &generic_crt_640x480; + break; + case MTYPE_CRT800x600: + cmx2xx_display = &generic_crt_800x600; + break; + case MTYPE_TFT320x240: + cmx2xx_display = &generic_tft_320x240; + break; + case MTYPE_STN640x480: + cmx2xx_display = &generic_stn_640x480; + break; + default: /* fallback to CRT 640x480 */ + cmx2xx_display = &generic_crt_640x480; + break; + } + return 1; +} + +/* + This should be done really early to get proper configuration for + frame buffer. + Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader + has limitied line length for kernel command line, and also it will + break compatibitlty with proprietary releases already in field. +*/ +__setup("monitor=", cmx2xx_set_display); + +static void __init cmx2xx_init_display(void) +{ + set_pxa_fb_info(cmx2xx_display); +} +#else +static inline void cmx2xx_init_display(void) {} +#endif + +#ifdef CONFIG_PM +static unsigned long sleep_save_msc[10]; + +static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state) +{ + cmx2xx_pci_suspend(); + + /* save MSC registers */ + sleep_save_msc[0] = MSC0; + sleep_save_msc[1] = MSC1; + sleep_save_msc[2] = MSC2; + + /* setup power saving mode registers */ + PCFR = 0x0; + PSLR = 0xff400000; + PMCR = 0x00000005; + PWER = 0x80000000; + PFER = 0x00000000; + PRER = 0x00000000; + PGSR0 = 0xC0018800; + PGSR1 = 0x004F0002; + PGSR2 = 0x6021C000; + PGSR3 = 0x00020000; + + return 0; +} + +static int cmx2xx_resume(struct sys_device *dev) +{ + cmx2xx_pci_resume(); + + /* restore MSC registers */ + MSC0 = sleep_save_msc[0]; + MSC1 = sleep_save_msc[1]; + MSC2 = sleep_save_msc[2]; + + return 0; +} + +static struct sysdev_class cmx2xx_pm_sysclass = { + .name = "pm", + .resume = cmx2xx_resume, + .suspend = cmx2xx_suspend, +}; + +static struct sys_device cmx2xx_pm_device = { + .cls = &cmx2xx_pm_sysclass, +}; + +static int __init cmx2xx_pm_init(void) +{ + int error; + error = sysdev_class_register(&cmx2xx_pm_sysclass); + if (error == 0) + error = sysdev_register(&cmx2xx_pm_device); + return error; +} +#else +static int __init cmx2xx_pm_init(void) { return 0; } +#endif + +#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) +static void __init cmx2xx_init_ac97(void) +{ + pxa_set_ac97_info(NULL); +} +#else +static inline void cmx2xx_init_ac97(void) {} +#endif + +static void __init cmx2xx_init(void) +{ + cmx2xx_pm_init(); + + if (cpu_is_pxa25x()) + cmx255_init(); + else + cmx270_init(); + + cmx2xx_init_dm9000(); + cmx2xx_init_display(); + cmx2xx_init_ac97(); + cmx2xx_init_touchscreen(); + cmx2xx_init_leds(); +} + +static void __init cmx2xx_init_irq(void) +{ + pxa27x_init_irq(); + + if (cpu_is_pxa25x()) { + pxa25x_init_irq(); + cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ); + } else { + pxa27x_init_irq(); + cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ); + } +} + +#ifdef CONFIG_PCI +/* Map PCI companion statically */ +static struct map_desc cmx2xx_io_desc[] __initdata = { + [0] = { /* PCI bridge */ + .virtual = CMX2XX_IT8152_VIRT, + .pfn = __phys_to_pfn(PXA_CS4_PHYS), + .length = SZ_64M, + .type = MT_DEVICE + }, +}; + +static void __init cmx2xx_map_io(void) +{ + pxa_map_io(); + iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc)); + + it8152_base_address = CMX2XX_IT8152_VIRT; +} +#else +static void __init cmx2xx_map_io(void) +{ + pxa_map_io(); +} +#endif + +MACHINE_START(ARMCORE, "Compulab CM-X2XX") + .boot_params = 0xa0000100, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = cmx2xx_map_io, + .init_irq = cmx2xx_init_irq, + .timer = &pxa_timer, + .init_machine = cmx2xx_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c new file mode 100644 index 00000000000..deb46cd144b --- /dev/null +++ b/arch/arm/mach-pxa/cm-x300.c @@ -0,0 +1,465 @@ +/* + * linux/arch/arm/mach-pxa/cm-x300.c + * + * Support for the CompuLab CM-X300 modules + * + * Copyright (C) 2008 CompuLab Ltd. + * + * Mike Rapoport <mike@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <linux/gpio.h> +#include <linux/dm9000.h> +#include <linux/leds.h> + +#include <linux/i2c.h> +#include <linux/i2c/pca953x.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/mfp-pxa300.h> + +#include <mach/hardware.h> +#include <mach/gpio.h> +#include <mach/pxafb.h> +#include <mach/mmc.h> +#include <mach/ohci.h> +#include <mach/i2c.h> +#include <mach/pxa3xx_nand.h> + +#include <asm/mach/map.h> + +#include "generic.h" + +#define CM_X300_ETH_PHYS 0x08000010 + +#define GPIO82_MMC2_IRQ (82) +#define GPIO85_MMC2_WP (85) + +#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ) + +static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = { + /* LCD */ + GPIO54_LCD_LDD_0, + GPIO55_LCD_LDD_1, + GPIO56_LCD_LDD_2, + GPIO57_LCD_LDD_3, + GPIO58_LCD_LDD_4, + GPIO59_LCD_LDD_5, + GPIO60_LCD_LDD_6, + GPIO61_LCD_LDD_7, + GPIO62_LCD_LDD_8, + GPIO63_LCD_LDD_9, + GPIO64_LCD_LDD_10, + GPIO65_LCD_LDD_11, + GPIO66_LCD_LDD_12, + GPIO67_LCD_LDD_13, + GPIO68_LCD_LDD_14, + GPIO69_LCD_LDD_15, + GPIO72_LCD_FCLK, + GPIO73_LCD_LCLK, + GPIO74_LCD_PCLK, + GPIO75_LCD_BIAS, + + /* BTUART */ + GPIO111_UART2_RTS, + GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL, + GPIO113_UART2_TXD, + GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH, + + /* STUART */ + GPIO109_UART3_TXD, + GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL, + + /* AC97 */ + GPIO23_AC97_nACRESET, + GPIO24_AC97_SYSCLK, + GPIO29_AC97_BITCLK, + GPIO25_AC97_SDATA_IN_0, + GPIO27_AC97_SDATA_OUT, + GPIO28_AC97_SYNC, + + /* Keypad */ + GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH, + GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH, + GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH, + GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH, + GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH, + GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH, + GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH, + GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH, + GPIO121_KP_MKOUT_0, + GPIO122_KP_MKOUT_1, + GPIO123_KP_MKOUT_2, + GPIO124_KP_MKOUT_3, + GPIO125_KP_MKOUT_4, + GPIO4_2_KP_MKOUT_5, + + /* MMC1 */ + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, + GPIO7_MMC1_CLK, + GPIO8_MMC1_CMD, /* CMD0 for slot 0 */ + + /* MMC2 */ + GPIO9_MMC2_DAT0, + GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO11_MMC2_DAT2, + GPIO12_MMC2_DAT3, + GPIO13_MMC2_CLK, + GPIO14_MMC2_CMD, + + /* FFUART */ + GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL, + GPIO31_UART1_TXD, + GPIO32_UART1_CTS, + GPIO37_UART1_RTS, + GPIO33_UART1_DCD, + GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL, + GPIO35_UART1_RI, + GPIO36_UART1_DTR, + + /* GPIOs */ + GPIO79_GPIO, /* LED */ + GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */ + GPIO85_GPIO, /* MMC WP */ + GPIO99_GPIO, /* Ethernet IRQ */ +}; + +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource dm9000_resources[] = { + [0] = { + .start = CM_X300_ETH_PHYS, + .end = CM_X300_ETH_PHYS + 0x3, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CM_X300_ETH_PHYS + 0x4, + .end = CM_X300_ETH_PHYS + 0x4 + 500, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)), + .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct dm9000_plat_data cm_x300_dm9000_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, + .dev = { + .platform_data = &cm_x300_dm9000_platdata, + } + +}; + +static void __init cm_x300_init_dm9000(void) +{ + platform_device_register(&dm9000_device); +} +#else +static inline void cm_x300_init_dm9000(void) {} +#endif + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info cm_x300_lcd_modes[] = { + [0] = { + .pixclock = 38000, + .bpp = 16, + .xres = 480, + .yres = 640, + .hsync_len = 8, + .vsync_len = 2, + .left_margin = 8, + .upper_margin = 0, + .right_margin = 24, + .lower_margin = 4, + .cmap_greyscale = 0, + }, + [1] = { + .pixclock = 153800, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 2, + .left_margin = 8, + .upper_margin = 2, + .right_margin = 88, + .lower_margin = 2, + .cmap_greyscale = 0, + }, +}; + +static struct pxafb_mach_info cm_x300_lcd = { + .modes = cm_x300_lcd_modes, + .num_modes = 2, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +static void __init cm_x300_init_lcd(void) +{ + set_pxa_fb_info(&cm_x300_lcd); +} +#else +static inline void cm_x300_init_lcd(void) {} +#endif + +#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE) +static struct mtd_partition cm_x300_nand_partitions[] = { + [0] = { + .name = "OBM", + .offset = 0, + .size = SZ_256K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + [1] = { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + [2] = { + .name = "Environment", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K, + }, + [3] = { + .name = "reserved", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K + SZ_1M, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + [4] = { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + }, + [5] = { + .name = "fs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct pxa3xx_nand_platform_data cm_x300_nand_info = { + .enable_arbiter = 1, + .parts = cm_x300_nand_partitions, + .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions), +}; + +static void __init cm_x300_init_nand(void) +{ + pxa3xx_set_nand_info(&cm_x300_nand_info); +} +#else +static inline void cm_x300_init_nand(void) {} +#endif + +#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) +/* The first MMC slot of CM-X300 is hardwired to Libertas card and has + no detection/ro pins */ +static int cm_x300_mci_init(struct device *dev, + irq_handler_t cm_x300_detect_int, + void *data) +{ + return 0; +} + +static void cm_x300_mci_exit(struct device *dev, void *data) +{ +} + +static struct pxamci_platform_data cm_x300_mci_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = cm_x300_mci_init, + .exit = cm_x300_mci_exit, +}; + +static int cm_x300_mci2_ro(struct device *dev) +{ + return gpio_get_value(GPIO85_MMC2_WP); +} + +static int cm_x300_mci2_init(struct device *dev, + irq_handler_t cm_x300_detect_int, + void *data) +{ + int err; + + /* + * setup GPIO for CM-X300 MMC controller + */ + err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect"); + if (err) + goto err_request_cd; + gpio_direction_input(GPIO82_MMC2_IRQ); + + err = gpio_request(GPIO85_MMC2_WP, "mmc write protect"); + if (err) + goto err_request_wp; + gpio_direction_input(GPIO85_MMC2_WP); + + err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: MMC/SD/SDIO: " + "can't request card detect IRQ\n", __func__); + goto err_request_irq; + } + + return 0; + +err_request_irq: + gpio_free(GPIO85_MMC2_WP); +err_request_wp: + gpio_free(GPIO82_MMC2_IRQ); +err_request_cd: + return err; +} + +static void cm_x300_mci2_exit(struct device *dev, void *data) +{ + free_irq(CM_X300_MMC2_IRQ, data); + gpio_free(GPIO82_MMC2_IRQ); + gpio_free(GPIO85_MMC2_WP); +} + +static struct pxamci_platform_data cm_x300_mci2_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = cm_x300_mci2_init, + .exit = cm_x300_mci2_exit, + .get_ro = cm_x300_mci2_ro, +}; + +static void __init cm_x300_init_mmc(void) +{ + pxa_set_mci_info(&cm_x300_mci_platform_data); + pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data); +} +#else +static inline void cm_x300_init_mmc(void) {} +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct pxaohci_platform_data cm_x300_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, +}; + +static void __init cm_x300_init_ohci(void) +{ + pxa_set_ohci_info(&cm_x300_ohci_platform_data); +} +#else +static inline void cm_x300_init_ohci(void) {} +#endif + +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static struct gpio_led cm_x300_leds[] = { + [0] = { + .name = "cm-x300:green", + .default_trigger = "heartbeat", + .gpio = 79, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data cm_x300_gpio_led_pdata = { + .num_leds = ARRAY_SIZE(cm_x300_leds), + .leds = cm_x300_leds, +}; + +static struct platform_device cm_x300_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &cm_x300_gpio_led_pdata, + }, +}; + +static void __init cm_x300_init_leds(void) +{ + platform_device_register(&cm_x300_led_device); +} +#else +static inline void cm_x300_init_leds(void) {} +#endif + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +/* PCA9555 */ +static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = { + .gpio_base = 128, +}; + +static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = { + .gpio_base = 144, +}; + +static struct i2c_board_info cm_x300_gpio_ext_info[] = { + [0] = { + I2C_BOARD_INFO("pca9555", 0x24), + .platform_data = &cm_x300_gpio_ext_pdata_0, + }, + [1] = { + I2C_BOARD_INFO("pca9555", 0x25), + .platform_data = &cm_x300_gpio_ext_pdata_1, + }, +}; + +static void __init cm_x300_init_i2c(void) +{ + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, cm_x300_gpio_ext_info, + ARRAY_SIZE(cm_x300_gpio_ext_info)); +} +#else +static inline void cm_x300_init_i2c(void) {} +#endif + +static void __init cm_x300_init(void) +{ + /* board-processor specific GPIO initialization */ + pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg)); + + cm_x300_init_dm9000(); + cm_x300_init_lcd(); + cm_x300_init_ohci(); + cm_x300_init_mmc(); + cm_x300_init_nand(); + cm_x300_init_leds(); + cm_x300_init_i2c(); +} + +MACHINE_START(CM_X300, "CM-X300 module") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, + .init_machine = cm_x300_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c index abce13c846c..e8473624427 100644 --- a/arch/arm/mach-pxa/colibri.c +++ b/arch/arm/mach-pxa/colibri.c @@ -29,12 +29,17 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> #include <mach/pxa-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/mfp-pxa27x.h> #include <mach/colibri.h> #include "generic.h" #include "devices.h" +static unsigned long colibri_pin_config[] __initdata = { + GPIO78_nCS_2, /* Ethernet CS */ + GPIO114_GPIO, /* Ethernet IRQ */ +}; + /* * Flash */ @@ -116,9 +121,7 @@ static struct platform_device *colibri_devices[] __initdata = { static void __init colibri_init(void) { - /* DM9000 LAN */ - pxa_gpio_mode(GPIO78_nCS_2_MD); - pxa_gpio_mode(GPIO_DM9000 | GPIO_IN); + pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config)); platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices)); } diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index e703a8d209e..65558d6aa22 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -20,7 +20,12 @@ #include <linux/interrupt.h> #include <linux/mmc/host.h> #include <linux/pm.h> +#include <linux/gpio.h> #include <linux/backlight.h> +#include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/spi/corgi_lcd.h> #include <video/w100fb.h> #include <asm/setup.h> @@ -28,7 +33,6 @@ #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/io.h> #include <asm/system.h> #include <asm/mach/arch.h> @@ -37,11 +41,12 @@ #include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/mfp-pxa25x.h> #include <mach/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> #include <mach/udc.h> +#include <mach/pxa2xx_spi.h> #include <mach/corgi.h> #include <mach/sharpsl.h> @@ -52,6 +57,61 @@ #include "devices.h" #include "sharpsl.h" +static unsigned long corgi_pin_config[] __initdata = { + /* Static Memory I/O */ + GPIO78_nCS_2, /* w100fb */ + GPIO80_nCS_4, /* scoop */ + + /* SSP1 */ + GPIO23_SSP1_SCLK, + GPIO25_SSP1_TXD, + GPIO26_SSP1_RXD, + GPIO24_GPIO, /* CORGI_GPIO_ADS7846_CS - SFRM as chip select */ + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + GPIO32_I2S_SYSCLK, + + /* Infra-Red */ + GPIO47_FICP_TXD, + GPIO46_FICP_RXD, + + /* FFUART */ + GPIO40_FFUART_DTR, + GPIO41_FFUART_RTS, + GPIO39_FFUART_TXD, + GPIO37_FFUART_DSR, + GPIO34_FFUART_RXD, + GPIO35_FFUART_CTS, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + + /* GPIO */ + GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */ + GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */ + GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */ + GPIO22_GPIO, /* CORGI_GPIO_IR_ON */ + GPIO44_GPIO, /* CORGI_GPIO_HSYNC */ + + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, +}; /* * Corgi SCOOP Device @@ -67,6 +127,7 @@ static struct resource corgi_scoop_resources[] = { static struct scoop_config corgi_scoop_setup = { .io_dir = CORGI_SCOOP_IO_DIR, .io_out = CORGI_SCOOP_IO_OUT, + .gpio_base = CORGI_SCOOP_GPIO_BASE, }; struct platform_device corgiscoop_device = { @@ -79,27 +140,6 @@ struct platform_device corgiscoop_device = { .resource = corgi_scoop_resources, }; -static void corgi_pcmcia_init(void) -{ - /* Setup default state of GPIO outputs - before we enable them as outputs. */ - GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | - GPIO_bit(GPIO53_nPCE_2); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); - pxa_gpio_mode(GPIO52_nPCE_1_MD); - pxa_gpio_mode(GPIO53_nPCE_2_MD); - pxa_gpio_mode(GPIO54_pSKTSEL_MD); -} - static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { { .dev = &corgiscoop_device.dev, @@ -112,58 +152,10 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { static struct scoop_pcmcia_config corgi_pcmcia_config = { .devs = &corgi_pcmcia_scoop[0], .num_devs = 1, - .pcmcia_init = corgi_pcmcia_init, }; EXPORT_SYMBOL(corgiscoop_device); - -/* - * Corgi SSP Device - * - * Set the parent as the scoop device because a lot of SSP devices - * also use scoop functions and this makes the power up/down order - * work correctly. - */ -struct platform_device corgissp_device = { - .name = "corgi-ssp", - .dev = { - .parent = &corgiscoop_device.dev, - }, - .id = -1, -}; - -struct corgissp_machinfo corgi_ssp_machinfo = { - .port = 1, - .cs_lcdcon = CORGI_GPIO_LCDCON_CS, - .cs_ads7846 = CORGI_GPIO_ADS7846_CS, - .cs_max1111 = CORGI_GPIO_MAX1111_CS, - .clk_lcdcon = 76, - .clk_ads7846 = 2, - .clk_max1111 = 8, -}; - - -/* - * LCD/Framebuffer - */ -static void w100_lcdtg_suspend(struct w100fb_par *par) -{ - corgi_lcdtg_suspend(); -} - -static void w100_lcdtg_init(struct w100fb_par *par) -{ - corgi_lcdtg_hw_init(par->xres); -} - - -static struct w100_tg_info corgi_lcdtg_info = { - .change = w100_lcdtg_init, - .suspend = w100_lcdtg_suspend, - .resume = w100_lcdtg_init, -}; - static struct w100_mem_info corgi_fb_mem = { .ext_cntl = 0x00040003, .sdram_mode_reg = 0x00650021, @@ -242,7 +234,6 @@ static struct w100_mode corgi_fb_modes[] = { }; static struct w100fb_mach_info corgi_fb_info = { - .tg = &corgi_lcdtg_info, .init_mode = INIT_MODE_ROTATED, .mem = &corgi_fb_mem, .regs = &corgi_fb_regs, @@ -268,60 +259,10 @@ static struct platform_device corgifb_device = { .resource = corgi_fb_resources, .dev = { .platform_data = &corgi_fb_info, - .parent = &corgissp_device.dev, }, }; - -/* - * Corgi Backlight Device - */ -static void corgi_bl_kick_battery(void) -{ - void (*kick_batt)(void); - - kick_batt = symbol_get(sharpsl_battery_kick); - if (kick_batt) { - kick_batt(); - symbol_put(sharpsl_battery_kick); - } -} - -static void corgi_bl_set_intensity(int intensity) -{ - if (intensity > 0x10) - intensity += 0x10; - - /* Bits 0-4 are accessed via the SSP interface */ - corgi_ssp_blduty_set(intensity & 0x1f); - - /* Bit 5 is via SCOOP */ - if (intensity & 0x0020) - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); - else - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); -} - -static struct generic_bl_info corgi_bl_machinfo = { - .name = "corgi-bl", - .max_intensity = 0x2f, - .default_intensity = 0x1f, - .limit_mask = 0x0b, - .set_bl_intensity = corgi_bl_set_intensity, - .kick_battery = corgi_bl_kick_battery, -}; - -static struct platform_device corgibl_device = { - .name = "generic-bl", - .dev = { - .parent = &corgifb_device.dev, - .platform_data = &corgi_bl_machinfo, - }, - .id = -1, -}; - - /* * Corgi Keyboard Device */ @@ -330,75 +271,35 @@ static struct platform_device corgikbd_device = { .id = -1, }; - /* * Corgi LEDs */ -static struct platform_device corgiled_device = { - .name = "corgi-led", - .id = -1, -}; - - -/* - * Corgi Touch Screen Device - */ -static unsigned long (*get_hsync_invperiod)(struct device *dev); - -static void inline sharpsl_wait_sync(int gpio) -{ - while((GPLR(gpio) & GPIO_bit(gpio)) == 0); - while((GPLR(gpio) & GPIO_bit(gpio)) != 0); -} - -static unsigned long corgi_get_hsync_invperiod(void) -{ - if (!get_hsync_invperiod) - get_hsync_invperiod = symbol_get(w100fb_get_hsynclen); - if (!get_hsync_invperiod) - return 0; - - return get_hsync_invperiod(&corgifb_device.dev); -} - -static void corgi_put_hsync(void) -{ - if (get_hsync_invperiod) - symbol_put(w100fb_get_hsynclen); - get_hsync_invperiod = NULL; -} - -static void corgi_wait_hsync(void) -{ - sharpsl_wait_sync(CORGI_GPIO_HSYNC); -} - -static struct resource corgits_resources[] = { - [0] = { - .start = CORGI_IRQ_GPIO_TP_INT, - .end = CORGI_IRQ_GPIO_TP_INT, - .flags = IORESOURCE_IRQ, +static struct gpio_led corgi_gpio_leds[] = { + { + .name = "corgi:amber:charge", + .default_trigger = "sharpsl-charge", + .gpio = CORGI_GPIO_LED_ORANGE, + }, + { + .name = "corgi:green:mail", + .default_trigger = "nand-disk", + .gpio = CORGI_GPIO_LED_GREEN, }, }; -static struct corgits_machinfo corgi_ts_machinfo = { - .get_hsync_invperiod = corgi_get_hsync_invperiod, - .put_hsync = corgi_put_hsync, - .wait_hsync = corgi_wait_hsync, +static struct gpio_led_platform_data corgi_gpio_leds_info = { + .leds = corgi_gpio_leds, + .num_leds = ARRAY_SIZE(corgi_gpio_leds), }; -static struct platform_device corgits_device = { - .name = "corgi-ts", +static struct platform_device corgiled_device = { + .name = "leds-gpio", + .id = -1, .dev = { - .parent = &corgissp_device.dev, - .platform_data = &corgi_ts_machinfo, + .platform_data = &corgi_gpio_leds_info, }, - .id = -1, - .num_resources = ARRAY_SIZE(corgits_resources), - .resource = corgits_resources, }; - /* * MMC/SD Device * @@ -411,20 +312,42 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo { int err; - /* setup GPIO for PXA25x MMC controller */ - pxa_gpio_mode(GPIO6_MMCCLK_MD); - pxa_gpio_mode(GPIO8_MMCCS0_MD); - pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN); - pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT); + err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT"); + if (err) + goto err_out; - corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250); + err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP"); + if (err) + goto err_free_1; - err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC card detect", data); + err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR"); if (err) - printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + goto err_free_2; + gpio_direction_input(CORGI_GPIO_nSD_DETECT); + gpio_direction_input(CORGI_GPIO_nSD_WP); + gpio_direction_output(CORGI_GPIO_SD_PWR, 0); + + corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + "MMC card detect", data); + if (err) { + pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n", + __func__); + goto err_free_3; + } + return 0; + +err_free_3: + gpio_free(CORGI_GPIO_SD_PWR); +err_free_2: + gpio_free(CORGI_GPIO_nSD_WP); +err_free_1: + gpio_free(CORGI_GPIO_nSD_DETECT); +err_out: return err; } @@ -432,20 +355,20 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - if (( 1 << vdd) & p_d->ocr_mask) - GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR); - else - GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR); + gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask)); } static int corgi_mci_get_ro(struct device *dev) { - return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP); + return gpio_get_value(CORGI_GPIO_nSD_WP); } static void corgi_mci_exit(struct device *dev, void *data) { free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data); + gpio_free(CORGI_GPIO_SD_PWR); + gpio_free(CORGI_GPIO_nSD_WP); + gpio_free(CORGI_GPIO_nSD_DETECT); } static struct pxamci_platform_data corgi_mci_platform_data = { @@ -462,16 +385,32 @@ static struct pxamci_platform_data corgi_mci_platform_data = { */ static void corgi_irda_transceiver_mode(struct device *dev, int mode) { - if (mode & IR_OFF) - GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON); - else - GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON); + gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF); pxa2xx_transceiver_mode(dev, mode); } +static int corgi_irda_startup(struct device *dev) +{ + int err; + + err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON"); + if (err) + return err; + + gpio_direction_output(CORGI_GPIO_IR_ON, 1); + return 0; +} + +static void corgi_irda_shutdown(struct device *dev) +{ + gpio_free(CORGI_GPIO_IR_ON); +} + static struct pxaficp_platform_data corgi_ficp_platform_data = { - .transceiver_cap = IR_SIRMODE | IR_OFF, - .transceiver_mode = corgi_irda_transceiver_mode, + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = corgi_irda_transceiver_mode, + .startup = corgi_irda_startup, + .shutdown = corgi_irda_shutdown, }; @@ -483,14 +422,129 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER) +static struct pxa2xx_spi_master corgi_spi_info = { + .num_chipselect = 3, +}; + +static struct ads7846_platform_data corgi_ads7846_info = { + .model = 7846, + .vref_delay_usecs = 100, + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .gpio_pendown = CORGI_GPIO_TP_INT, +}; + +static void corgi_ads7846_cs(u32 command) +{ + gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT)); +} + +static struct pxa2xx_spi_chip corgi_ads7846_chip = { + .cs_control = corgi_ads7846_cs, +}; + +static void corgi_bl_kick_battery(void) +{ + void (*kick_batt)(void); + + kick_batt = symbol_get(sharpsl_battery_kick); + if (kick_batt) { + kick_batt(); + symbol_put(sharpsl_battery_kick); + } +} + +static struct corgi_lcd_platform_data corgi_lcdcon_info = { + .init_mode = CORGI_LCD_MODE_VGA, + .max_intensity = 0x2f, + .default_intensity = 0x1f, + .limit_mask = 0x0b, + .gpio_backlight_cont = CORGI_GPIO_BACKLIGHT_CONT, + .gpio_backlight_on = -1, + .kick_battery = corgi_bl_kick_battery, +}; + +static void corgi_lcdcon_cs(u32 command) +{ + gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT)); +} + +static struct pxa2xx_spi_chip corgi_lcdcon_chip = { + .cs_control = corgi_lcdcon_cs, +}; + +static void corgi_max1111_cs(u32 command) +{ + gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT)); +} + +static struct pxa2xx_spi_chip corgi_max1111_chip = { + .cs_control = corgi_max1111_cs, +}; + +static struct spi_board_info corgi_spi_devices[] = { + { + .modalias = "ads7846", + .max_speed_hz = 1200000, + .bus_num = 1, + .chip_select = 0, + .platform_data = &corgi_ads7846_info, + .controller_data= &corgi_ads7846_chip, + .irq = gpio_to_irq(CORGI_GPIO_TP_INT), + }, { + .modalias = "corgi-lcd", + .max_speed_hz = 50000, + .bus_num = 1, + .chip_select = 1, + .platform_data = &corgi_lcdcon_info, + .controller_data= &corgi_lcdcon_chip, + }, { + .modalias = "max1111", + .max_speed_hz = 450000, + .bus_num = 1, + .chip_select = 2, + .controller_data= &corgi_max1111_chip, + }, +}; + +static void __init corgi_init_spi(void) +{ + int err; + + err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS"); + if (err) + return; + + err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS"); + if (err) + goto err_free_1; + + err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS"); + if (err) + goto err_free_2; + + gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1); + gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1); + gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1); + + pxa2xx_set_spi_info(1, &corgi_spi_info); + spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices)); + return; + +err_free_2: + gpio_free(CORGI_GPIO_LCDCON_CS); +err_free_1: + gpio_free(CORGI_GPIO_ADS7846_CS); +} +#else +static inline void corgi_init_spi(void) {} +#endif static struct platform_device *devices[] __initdata = { &corgiscoop_device, - &corgissp_device, &corgifb_device, &corgikbd_device, - &corgibl_device, - &corgits_device, &corgiled_device, }; @@ -498,7 +552,8 @@ static void corgi_poweroff(void) { if (!machine_is_corgi()) /* Green LED off tells the bootloader to halt */ - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN); + gpio_set_value(CORGI_GPIO_LED_GREEN, 0); + arm_machine_restart('h'); } @@ -506,7 +561,8 @@ static void corgi_restart(char mode) { if (!machine_is_corgi()) /* Green LED on tells the bootloader to reboot */ - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN); + gpio_set_value(CORGI_GPIO_LED_GREEN, 1); + arm_machine_restart('h'); } @@ -515,20 +571,12 @@ static void __init corgi_init(void) pm_power_off = corgi_poweroff; arm_pm_restart = corgi_restart; - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x0158C000; - PGSR1 = 0x00FF0080; - PGSR2 = 0x0001C004; /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ PCFR |= PCFR_OPDE; - corgi_ssp_set_machinfo(&corgi_ssp_machinfo); + pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config)); - pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN); + corgi_init_spi(); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&corgi_mci_platform_data); diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c deleted file mode 100644 index 311baf149b0..00000000000 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/corgi_lcd.c - * - * Corgi/Spitz LCD Specific Code - * - * Copyright (C) 2005 Richard Purdie - * - * Connectivity: - * Corgi - LCD to ATI Imageon w100 (Wallaby) - * Spitz - LCD to PXA Framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/string.h> -#include <mach/akita.h> -#include <mach/corgi.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> -#include <mach/sharpsl.h> -#include <mach/spitz.h> -#include <asm/hardware/scoop.h> -#include <asm/mach/sharpsl_param.h> -#include "generic.h" - -/* Register Addresses */ -#define RESCTL_ADRS 0x00 -#define PHACTRL_ADRS 0x01 -#define DUTYCTRL_ADRS 0x02 -#define POWERREG0_ADRS 0x03 -#define POWERREG1_ADRS 0x04 -#define GPOR3_ADRS 0x05 -#define PICTRL_ADRS 0x06 -#define POLCTRL_ADRS 0x07 - -/* Register Bit Definitions */ -#define RESCTL_QVGA 0x01 -#define RESCTL_VGA 0x00 - -#define POWER1_VW_ON 0x01 /* VW Supply FET ON */ -#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ -#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ - -#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ -#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ -#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ - -#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ -#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ -#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ -#define POWER0_COM_ON 0x08 /* COM Power Supply ON */ -#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ - -#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ -#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */ -#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ - -#define PICTRL_INIT_STATE 0x01 -#define PICTRL_INIOFF 0x02 -#define PICTRL_POWER_DOWN 0x04 -#define PICTRL_COM_SIGNAL_OFF 0x08 -#define PICTRL_DAC_SIGNAL_OFF 0x10 - -#define POLCTRL_SYNC_POL_FALL 0x01 -#define POLCTRL_EN_POL_FALL 0x02 -#define POLCTRL_DATA_POL_FALL 0x04 -#define POLCTRL_SYNC_ACT_H 0x08 -#define POLCTRL_EN_ACT_L 0x10 - -#define POLCTRL_SYNC_POL_RISE 0x00 -#define POLCTRL_EN_POL_RISE 0x00 -#define POLCTRL_DATA_POL_RISE 0x00 -#define POLCTRL_SYNC_ACT_L 0x00 -#define POLCTRL_EN_ACT_H 0x00 - -#define PHACTRL_PHASE_MANUAL 0x01 -#define DEFAULT_PHAD_QVGA (9) -#define DEFAULT_COMADJ (125) - -/* - * This is only a psuedo I2C interface. We can't use the standard kernel - * routines as the interface is write only. We just assume the data is acked... - */ -static void lcdtg_ssp_i2c_send(u8 data) -{ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, data); - udelay(10); -} - -static void lcdtg_i2c_send_bit(u8 data) -{ - lcdtg_ssp_i2c_send(data); - lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(data); -} - -static void lcdtg_i2c_send_start(u8 base) -{ - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base); -} - -static void lcdtg_i2c_send_stop(u8 base) -{ - lcdtg_ssp_i2c_send(base); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); -} - -static void lcdtg_i2c_send_byte(u8 base, u8 data) -{ - int i; - for (i = 0; i < 8; i++) { - if (data & 0x80) - lcdtg_i2c_send_bit(base | POWER0_COM_DOUT); - else - lcdtg_i2c_send_bit(base); - data <<= 1; - } -} - -static void lcdtg_i2c_wait_ack(u8 base) -{ - lcdtg_i2c_send_bit(base); -} - -static void lcdtg_set_common_voltage(u8 base_data, u8 data) -{ - /* Set Common Voltage to M62332FP via I2C */ - lcdtg_i2c_send_start(base_data); - lcdtg_i2c_send_byte(base_data, 0x9c); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, 0x00); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, data); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_stop(base_data); -} - -/* Set Phase Adjust */ -static void lcdtg_set_phadadj(int mode) -{ - int adj; - switch(mode) { - case 480: - case 640: - /* Setting for VGA */ - adj = sharpsl_param.phadadj; - if (adj < 0) { - adj = PHACTRL_PHASE_MANUAL; - } else { - adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL; - } - break; - case 240: - case 320: - default: - /* Setting for QVGA */ - adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; - break; - } - - corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj); -} - -static int lcd_inited; - -void corgi_lcdtg_hw_init(int mode) -{ - if (!lcd_inited) { - int comadj; - - /* Initialize Internal Logic & Port */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE - | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF); - - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - /* VDD(+8V), SVSS(-4V) ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - mdelay(3); - - /* DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* INIB = H, INI = L */ - /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); - - /* Set Common Voltage */ - comadj = sharpsl_param.comadj; - if (comadj < 0) - comadj = DEFAULT_COMADJ; - lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj); - - /* VCC5 ON, DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | - POWER0_COM_OFF | POWER0_VCC5_ON); - - /* GVSS(-8V) ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - mdelay(2); - - /* COM SIGNAL ON (PICTL[3] = L) */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE); - - /* COM ON, DAC ON, VCC5_ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_ON | POWER0_VCC5_ON); - - /* VW ON, GVSS ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* Signals output enable */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); - - /* Set Phase Adjust */ - lcdtg_set_phadadj(mode); - - /* Initialize for Input Signals from ATI */ - corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE - | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H); - udelay(1000); - - lcd_inited=1; - } else { - lcdtg_set_phadadj(mode); - } - - switch(mode) { - case 480: - case 640: - /* Set Lcd Resolution (VGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA); - break; - case 240: - case 320: - default: - /* Set Lcd Resolution (QVGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA); - break; - } -} - -void corgi_lcdtg_suspend(void) -{ - /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ - mdelay(34); - - /* (1)VW OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* (2)COM OFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); - - /* (3)Set Common Voltage Bias 0V */ - lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0); - - /* (4)GVSS OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - - /* (5)VCC5 OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (6)Set PDWN, INIOFF, DACOFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | - PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); - - /* (7)DAC OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (8)VDD OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - lcd_inited = 0; -} - diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 35bbfccd2df..eb7d6c94aa4 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -21,7 +21,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> #include <mach/hardware.h> -#include <asm/hardware/scoop.h> #include <mach/sharpsl.h> #include <mach/corgi.h> diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c deleted file mode 100644 index 8e2f2215c4b..00000000000 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * SSP control code for Sharp Corgi devices - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <mach/ssp.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-gpio.h> -#include <mach/regs-ssp.h> -#include "sharpsl.h" - -static DEFINE_SPINLOCK(corgi_ssp_lock); -static struct ssp_dev corgi_ssp_dev; -static struct ssp_state corgi_ssp_state; -static struct corgissp_machinfo *ssp_machinfo; - -/* - * There are three devices connected to the SSP interface: - * 1. A touchscreen controller (TI ADS7846 compatible) - * 2. An LCD controller (with some Backlight functionality) - * 3. A battery monitoring IC (Maxim MAX1111) - * - * Each device uses a different speed/mode of communication. - * - * The touchscreen is very sensitive and the most frequently used - * so the port is left configured for this. - * - * Devices are selected using Chip Selects on GPIOs. - */ - -/* - * ADS7846 Routines - */ -unsigned long corgi_ssp_ads7846_putget(ulong data) -{ - unsigned long flag; - u32 ret = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, &ret); - - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return ret; -} - -/* - * NOTE: These functions should always be called in interrupt context - * and use the _lock and _unlock functions. They are very time sensitive. - */ -void corgi_ssp_ads7846_lock(void) -{ - spin_lock(&corgi_ssp_lock); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); -} - -void corgi_ssp_ads7846_unlock(void) -{ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock(&corgi_ssp_lock); -} - -void corgi_ssp_ads7846_put(ulong data) -{ - ssp_write_word(&corgi_ssp_dev,data); -} - -unsigned long corgi_ssp_ads7846_get(void) -{ - u32 ret = 0; - ssp_read_word(&corgi_ssp_dev, &ret); - return ret; -} - -EXPORT_SYMBOL(corgi_ssp_ads7846_putget); -EXPORT_SYMBOL(corgi_ssp_ads7846_lock); -EXPORT_SYMBOL(corgi_ssp_ads7846_unlock); -EXPORT_SYMBOL(corgi_ssp_ads7846_put); -EXPORT_SYMBOL(corgi_ssp_ads7846_get); - - -/* - * LCD/Backlight Routines - */ -unsigned long corgi_ssp_dac_put(ulong data) -{ - unsigned long flag, sscr1 = SSCR1_SPH; - u32 tmp; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - - if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi()) - sscr1 = 0; - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon)); - ssp_enable(&corgi_ssp_dev); - - if (ssp_machinfo->cs_lcdcon >= 0) - GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - ssp_write_word(&corgi_ssp_dev,data); - /* Read null data back from device to prevent SSP overflow */ - ssp_read_word(&corgi_ssp_dev, &tmp); - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return 0; -} - -void corgi_ssp_lcdtg_send(u8 adrs, u8 data) -{ - corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f)); -} - -void corgi_ssp_blduty_set(int duty) -{ - corgi_ssp_lcdtg_send(0x02,duty); -} - -EXPORT_SYMBOL(corgi_ssp_lcdtg_send); -EXPORT_SYMBOL(corgi_ssp_blduty_set); - -/* - * Max1111 Routines - */ -int corgi_ssp_max1111_get(ulong data) -{ - unsigned long flag; - long voltage = 0, voltage1 = 0, voltage2 = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_max1111 >= 0) - GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111)); - ssp_enable(&corgi_ssp_dev); - - udelay(1); - - /* TB1/RB1 */ - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */ - - /* TB12/RB2 */ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); - - /* TB13/RB3*/ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - if (voltage1 & 0xc0 || voltage2 & 0x3f) - voltage = -1; - else - voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03); - - return voltage; -} - -EXPORT_SYMBOL(corgi_ssp_max1111_get); - -/* - * Support Routines - */ - -void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) -{ - ssp_machinfo = machinfo; -} - -static int __init corgi_ssp_probe(struct platform_device *dev) -{ - int ret; - - /* Chip Select - Disable All */ - if (ssp_machinfo->cs_lcdcon >= 0) - pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_max1111 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_ads7846 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH); - - ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); - - if (ret) - printk(KERN_ERR "Unable to register SSP handler!\n"); - else { - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - } - - return ret; -} - -static int corgi_ssp_remove(struct platform_device *dev) -{ - ssp_exit(&corgi_ssp_dev); - return 0; -} - -static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) -{ - ssp_flush(&corgi_ssp_dev); - ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); - - return 0; -} - -static int corgi_ssp_resume(struct platform_device *dev) -{ - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); - ssp_enable(&corgi_ssp_dev); - - return 0; -} - -static struct platform_driver corgissp_driver = { - .probe = corgi_ssp_probe, - .remove = corgi_ssp_remove, - .suspend = corgi_ssp_suspend, - .resume = corgi_ssp_resume, - .driver = { - .name = "corgi-ssp", - }, -}; - -int __init corgi_ssp_init(void) -{ - return platform_driver_register(&corgissp_driver); -} - -arch_initcall(corgi_ssp_init); diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 6f5569bac13..d82528e74bd 100644 --- a/arch/arm/mach-pxa/cpu-pxa.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-pxa/cpu-pxa.c + * linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c * * Copyright (C) 2002,2003 Intrinsyc Software * diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c new file mode 100644 index 00000000000..1ea0c9c0ada --- /dev/null +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -0,0 +1,258 @@ +/* + * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c + * + * Copyright (C) 2008 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/cpufreq.h> + +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <mach/pxa3xx-regs.h> + +#include "generic.h" + +#define HSS_104M (0) +#define HSS_156M (1) +#define HSS_208M (2) +#define HSS_312M (3) + +#define SMCFS_78M (0) +#define SMCFS_104M (2) +#define SMCFS_208M (5) + +#define SFLFS_104M (0) +#define SFLFS_156M (1) +#define SFLFS_208M (2) +#define SFLFS_312M (3) + +#define XSPCLK_156M (0) +#define XSPCLK_NONE (3) + +#define DMCFS_26M (0) +#define DMCFS_260M (3) + +struct pxa3xx_freq_info { + unsigned int cpufreq_mhz; + unsigned int core_xl : 5; + unsigned int core_xn : 3; + unsigned int hss : 2; + unsigned int dmcfs : 2; + unsigned int smcfs : 3; + unsigned int sflfs : 2; + unsigned int df_clkdiv : 3; + + int vcc_core; /* in mV */ + int vcc_sram; /* in mV */ +}; + +#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \ +{ \ + .cpufreq_mhz = cpufreq, \ + .core_xl = _xl, \ + .core_xn = _xn, \ + .hss = HSS_##_hss##M, \ + .dmcfs = DMCFS_##_dmc##M, \ + .smcfs = SMCFS_##_smc##M, \ + .sflfs = SFLFS_##_sfl##M, \ + .df_clkdiv = _dfi, \ + .vcc_core = vcore, \ + .vcc_sram = vsram, \ +} + +static struct pxa3xx_freq_info pxa300_freqs[] = { + /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ + OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ + OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ + OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ + OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ +}; + +static struct pxa3xx_freq_info pxa320_freqs[] = { + /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ + OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ + OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ + OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ + OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ + OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */ +}; + +static unsigned int pxa3xx_freqs_num; +static struct pxa3xx_freq_info *pxa3xx_freqs; +static struct cpufreq_frequency_table *pxa3xx_freqs_table; + +static int setup_freqs_table(struct cpufreq_policy *policy, + struct pxa3xx_freq_info *freqs, int num) +{ + struct cpufreq_frequency_table *table; + int i; + + table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL); + if (table == NULL) + return -ENOMEM; + + for (i = 0; i < num; i++) { + table[i].index = i; + table[i].frequency = freqs[i].cpufreq_mhz * 1000; + } + table[num].frequency = i; + table[num].frequency = CPUFREQ_TABLE_END; + + pxa3xx_freqs = freqs; + pxa3xx_freqs_num = num; + pxa3xx_freqs_table = table; + + return cpufreq_frequency_table_cpuinfo(policy, table); +} + +static void __update_core_freq(struct pxa3xx_freq_info *info) +{ + uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK; + uint32_t accr = ACCR; + uint32_t xclkcfg; + + accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK); + accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl); + + /* No clock until core PLL is re-locked */ + accr |= ACCR_XSPCLK(XSPCLK_NONE); + + xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2; /* turbo bit */ + + ACCR = accr; + __asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg)); + + while ((ACSR & mask) != (accr & mask)) + cpu_relax(); +} + +static void __update_bus_freq(struct pxa3xx_freq_info *info) +{ + uint32_t mask; + uint32_t accr = ACCR; + + mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK | + ACCR_DMCFS_MASK; + + accr &= ~mask; + accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) | + ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs); + + ACCR = accr; + + while ((ACSR & mask) != (accr & mask)) + cpu_relax(); +} + +static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table); +} + +static unsigned int pxa3xx_cpufreq_get(unsigned int cpu) +{ + return get_clk_frequency_khz(0); +} + +static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct pxa3xx_freq_info *next; + struct cpufreq_freqs freqs; + unsigned long flags; + int idx; + + if (policy->cpu != 0) + return -EINVAL; + + /* Lookup the next frequency */ + if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table, + target_freq, relation, &idx)) + return -EINVAL; + + next = &pxa3xx_freqs[idx]; + + freqs.old = policy->cur; + freqs.new = next->cpufreq_mhz * 1000; + freqs.cpu = policy->cpu; + + pr_debug("CPU frequency from %d MHz to %d MHz%s\n", + freqs.old / 1000, freqs.new / 1000, + (freqs.old == freqs.new) ? " (skipped)" : ""); + + if (freqs.old == target_freq) + return 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + local_irq_save(flags); + __update_core_freq(next); + __update_bus_freq(next); + local_irq_restore(flags); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) +{ + int ret = -EINVAL; + + /* set default policy and cpuinfo */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.min_freq = 104000; + policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000; + policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ + policy->cur = policy->min = policy->max = get_clk_frequency_khz(0); + + if (cpu_is_pxa300() || cpu_is_pxa310()) + ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs)); + + if (cpu_is_pxa320()) + ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs)); + + if (ret) { + pr_err("failed to setup frequency table\n"); + return ret; + } + + pr_info("CPUFREQ support for PXA3xx initialized\n"); + return 0; +} + +static struct cpufreq_driver pxa3xx_cpufreq_driver = { + .verify = pxa3xx_cpufreq_verify, + .target = pxa3xx_cpufreq_set, + .init = pxa3xx_cpufreq_init, + .get = pxa3xx_cpufreq_get, + .name = "pxa3xx-cpufreq", +}; + +static int __init cpufreq_init(void) +{ + if (cpu_is_pxa3xx()) + return cpufreq_register_driver(&pxa3xx_cpufreq_driver); + + return 0; +} +module_init(cpufreq_init); + +static void __exit cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pxa3xx_cpufreq_driver); +} +module_exit(cpufreq_exit); + +MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 887c738f591..bb04af4b0aa 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -32,5 +32,6 @@ extern struct platform_device pxa27x_device_pwm0; extern struct platform_device pxa27x_device_pwm1; extern struct platform_device pxa3xx_device_nand; +extern struct platform_device pxa3xx_device_i2c_power; void __init pxa_register_device(struct platform_device *dev, void *data); diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c new file mode 100644 index 00000000000..d488eded205 --- /dev/null +++ b/arch/arm/mach-pxa/e330.c @@ -0,0 +1,43 @@ +/* + * Hardware definitions for the Toshiba eseries PDAs + * + * Copyright (c) 2003 Ian Molton <spyro@f2s.com> + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/setup.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/mfp-pxa25x.h> +#include <mach/hardware.h> +#include <mach/udc.h> + +#include "generic.h" +#include "eseries.h" + +static void __init e330_init(void) +{ + pxa_set_udc_info(&e7xx_udc_mach_info); +} + +MACHINE_START(E330, "Toshiba e330") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e330_init, + .timer = &pxa_timer, +MACHINE_END + diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c new file mode 100644 index 00000000000..8ecbc547982 --- /dev/null +++ b/arch/arm/mach-pxa/e350.c @@ -0,0 +1,43 @@ +/* + * Hardware definitions for the Toshiba eseries PDAs + * + * Copyright (c) 2003 Ian Molton <spyro@f2s.com> + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/setup.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/mfp-pxa25x.h> +#include <mach/hardware.h> +#include <mach/udc.h> + +#include "generic.h" +#include "eseries.h" + +static void __init e350_init(void) +{ + pxa_set_udc_info(&e7xx_udc_mach_info); +} + +MACHINE_START(E350, "Toshiba e350") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e350_init, + .timer = &pxa_timer, +MACHINE_END + diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c new file mode 100644 index 00000000000..544bbaa2062 --- /dev/null +++ b/arch/arm/mach-pxa/e400.c @@ -0,0 +1,94 @@ +/* + * Hardware definitions for the Toshiba eseries PDAs + * + * Copyright (c) 2003 Ian Molton <spyro@f2s.com> + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/setup.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/pxa-regs.h> +#include <mach/mfp-pxa25x.h> +#include <mach/hardware.h> + +#include <mach/pxafb.h> +#include <mach/udc.h> + +#include "generic.h" +#include "eseries.h" + +/* ------------------------ E400 LCD definitions ------------------------ */ + +static struct pxafb_mode_info e400_pxafb_mode_info = { + .pixclock = 140703, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 4, + .left_margin = 28, + .right_margin = 8, + .vsync_len = 3, + .upper_margin = 5, + .lower_margin = 6, + .sync = 0, +}; + +static struct pxafb_mach_info e400_pxafb_mach_info = { + .modes = &e400_pxafb_mode_info, + .num_modes = 1, + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = 0, + .pxafb_backlight_power = NULL, +}; + +/* ------------------------ E400 MFP config ----------------------------- */ + +static unsigned long e400_pin_config[] __initdata = { + /* Chip selects */ + GPIO15_nCS_1, /* CS1 - Flash */ + GPIO80_nCS_4, /* CS4 - TMIO */ + + /* Clocks */ + GPIO12_32KHz, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_GPIO, /* Used by TMIO for #SUSPEND */ + + /* wakeup */ + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, +}; + +/* ---------------------------------------------------------------------- */ + +static void __init e400_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config)); + set_pxa_fb_info(&e400_pxafb_mach_info); + pxa_set_udc_info(&e7xx_udc_mach_info); +} + +MACHINE_START(E400, "Toshiba e400") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e400_init, + .timer = &pxa_timer, +MACHINE_END + diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c deleted file mode 100644 index 263884165f5..00000000000 --- a/arch/arm/mach-pxa/e400_lcd.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * e400_lcd.c - * - * (c) 2005 Ian Molton <spyro@f2s.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/mach-types.h> -#include <mach/pxa-regs.h> -#include <mach/pxafb.h> - -static struct pxafb_mode_info e400_pxafb_mode_info = { - .pixclock = 140703, - .xres = 240, - .yres = 320, - .bpp = 16, - .hsync_len = 4, - .left_margin = 28, - .right_margin = 8, - .vsync_len = 3, - .upper_margin = 5, - .lower_margin = 6, - .sync = 0, -}; - -static struct pxafb_mach_info e400_pxafb_mach_info = { - .modes = &e400_pxafb_mode_info, - .num_modes = 1, - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = 0, - .pxafb_backlight_power = NULL, -}; - -static int __init e400_lcd_init(void) -{ - if (!machine_is_e400()) - return -ENODEV; - - set_pxa_fb_info(&e400_pxafb_mach_info); - return 0; -} - -module_init(e400_lcd_init); - -MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); -MODULE_DESCRIPTION("e400 lcd driver"); -MODULE_LICENSE("GPLv2"); - diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c new file mode 100644 index 00000000000..c57a15b37f0 --- /dev/null +++ b/arch/arm/mach-pxa/e740.c @@ -0,0 +1,169 @@ +/* + * Hardware definitions for the Toshiba eseries PDAs + * + * Copyright (c) 2003 Ian Molton <spyro@f2s.com> + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/fb.h> + +#include <video/w100fb.h> + +#include <asm/setup.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/mfp-pxa25x.h> +#include <mach/hardware.h> +#include <mach/udc.h> + +#include "generic.h" +#include "eseries.h" + + +/* ------------------------ e740 video support --------------------------- */ + +static struct w100_gen_regs e740_lcd_regs = { + .lcd_format = 0x00008023, + .lcdd_cntl1 = 0x0f000000, + .lcdd_cntl2 = 0x0003ffff, + .genlcd_cntl1 = 0x00ffff03, + .genlcd_cntl2 = 0x003c0f03, + .genlcd_cntl3 = 0x000143aa, +}; + +static struct w100_mode e740_lcd_mode = { + .xres = 240, + .yres = 320, + .left_margin = 20, + .right_margin = 28, + .upper_margin = 9, + .lower_margin = 8, + .crtc_ss = 0x80140013, + .crtc_ls = 0x81150110, + .crtc_gs = 0x80050005, + .crtc_vpos_gs = 0x000a0009, + .crtc_rev = 0x0040010a, + .crtc_dclk = 0xa906000a, + .crtc_gclk = 0x80050108, + .crtc_goe = 0x80050108, + .pll_freq = 57, + .pixclk_divider = 4, + .pixclk_divider_rotated = 4, + .pixclk_src = CLK_SRC_XTAL, + .sysclk_divider = 1, + .sysclk_src = CLK_SRC_PLL, + .crtc_ps1_active = 0x41060010, +}; + +static struct w100_gpio_regs e740_w100_gpio_info = { + .init_data1 = 0x21002103, + .gpio_dir1 = 0xffffdeff, + .gpio_oe1 = 0x03c00643, + .init_data2 = 0x003f003f, + .gpio_dir2 = 0xffffffff, + .gpio_oe2 = 0x000000ff, +}; + +static struct w100fb_mach_info e740_fb_info = { + .modelist = &e740_lcd_mode, + .num_modes = 1, + .regs = &e740_lcd_regs, + .gpio = &e740_w100_gpio_info, + .xtal_freq = 14318000, + .xtal_dbl = 1, +}; + +static struct resource e740_fb_resources[] = { + [0] = { + .start = 0x0c000000, + .end = 0x0cffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device e740_fb_device = { + .name = "w100fb", + .id = -1, + .dev = { + .platform_data = &e740_fb_info, + }, + .num_resources = ARRAY_SIZE(e740_fb_resources), + .resource = e740_fb_resources, +}; + +/* --------------------------- MFP Pin config -------------------------- */ + +static unsigned long e740_pin_config[] __initdata = { + /* Chip selects */ + GPIO15_nCS_1, /* CS1 - Flash */ + GPIO79_nCS_3, /* CS3 - IMAGEON */ + GPIO80_nCS_4, /* CS4 - TMIO */ + + /* Clocks */ + GPIO12_32KHz, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_GPIO, /* Used by TMIO for #SUSPEND */ + + /* PC Card */ + GPIO8_GPIO, /* CD0 */ + GPIO44_GPIO, /* CD1 */ + GPIO11_GPIO, /* IRQ0 */ + GPIO6_GPIO, /* IRQ1 */ + GPIO27_GPIO, /* RST0 */ + GPIO24_GPIO, /* RST1 */ + GPIO20_GPIO, /* PWR0 */ + GPIO23_GPIO, /* PWR1 */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* wakeup */ + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, +}; + +/* ----------------------------------------------------------------------- */ + +static struct platform_device *devices[] __initdata = { + &e740_fb_device, +}; + +static void __init e740_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config)); + platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_udc_info(&e7xx_udc_mach_info); +} + +MACHINE_START(E740, "Toshiba e740") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e740_init, + .timer = &pxa_timer, +MACHINE_END + diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c deleted file mode 100644 index 26bd599af17..00000000000 --- a/arch/arm/mach-pxa/e740_lcd.c +++ /dev/null @@ -1,123 +0,0 @@ -/* e740_lcd.c - * - * This file contains the definitions for the LCD timings and functions - * to control the LCD power / frontlighting via the w100fb driver. - * - * (c) 2005 Ian Molton <spyro@f2s.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/device.h> -#include <linux/fb.h> -#include <linux/err.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> - -#include <video/w100fb.h> - -/* -**potential** shutdown routine - to be investigated -devmem2 0x0c010528 w 0xff3fff00 -devmem2 0x0c010190 w 0x7FFF8000 -devmem2 0x0c0101b0 w 0x00FF0000 -devmem2 0x0c01008c w 0x00000000 -devmem2 0x0c010080 w 0x000000bf -devmem2 0x0c010098 w 0x00000015 -devmem2 0x0c010088 w 0x4b000204 -devmem2 0x0c010098 w 0x0000001d -*/ - -static struct w100_gen_regs e740_lcd_regs = { - .lcd_format = 0x00008023, - .lcdd_cntl1 = 0x0f000000, - .lcdd_cntl2 = 0x0003ffff, - .genlcd_cntl1 = 0x00ffff03, - .genlcd_cntl2 = 0x003c0f03, - .genlcd_cntl3 = 0x000143aa, -}; - -static struct w100_mode e740_lcd_mode = { - .xres = 240, - .yres = 320, - .left_margin = 20, - .right_margin = 28, - .upper_margin = 9, - .lower_margin = 8, - .crtc_ss = 0x80140013, - .crtc_ls = 0x81150110, - .crtc_gs = 0x80050005, - .crtc_vpos_gs = 0x000a0009, - .crtc_rev = 0x0040010a, - .crtc_dclk = 0xa906000a, - .crtc_gclk = 0x80050108, - .crtc_goe = 0x80050108, - .pll_freq = 57, - .pixclk_divider = 4, - .pixclk_divider_rotated = 4, - .pixclk_src = CLK_SRC_XTAL, - .sysclk_divider = 1, - .sysclk_src = CLK_SRC_PLL, - .crtc_ps1_active = 0x41060010, -}; - - -static struct w100_gpio_regs e740_w100_gpio_info = { - .init_data1 = 0x21002103, - .gpio_dir1 = 0xffffdeff, - .gpio_oe1 = 0x03c00643, - .init_data2 = 0x003f003f, - .gpio_dir2 = 0xffffffff, - .gpio_oe2 = 0x000000ff, -}; - -static struct w100fb_mach_info e740_fb_info = { - .modelist = &e740_lcd_mode, - .num_modes = 1, - .regs = &e740_lcd_regs, - .gpio = &e740_w100_gpio_info, - .xtal_freq = 14318000, - .xtal_dbl = 1, -}; - -static struct resource e740_fb_resources[] = { - [0] = { - .start = 0x0c000000, - .end = 0x0cffffff, - .flags = IORESOURCE_MEM, - }, -}; - -/* ----------------------- device declarations -------------------------- */ - - -static struct platform_device e740_fb_device = { - .name = "w100fb", - .id = -1, - .dev = { - .platform_data = &e740_fb_info, - }, - .num_resources = ARRAY_SIZE(e740_fb_resources), - .resource = e740_fb_resources, -}; - -static int e740_lcd_init(void) -{ - int ret; - - if (!machine_is_e740()) - return -ENODEV; - - return platform_device_register(&e740_fb_device); -} - -module_init(e740_lcd_init); - -MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); -MODULE_DESCRIPTION("e740 lcd driver"); -MODULE_LICENSE("GPLv2"); diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750.c index 75edc3b5390..640e738b85d 100644 --- a/arch/arm/mach-pxa/e750_lcd.c +++ b/arch/arm/mach-pxa/e750.c @@ -1,25 +1,35 @@ -/* e750_lcd.c +/* + * Hardware definitions for the Toshiba eseries PDAs * - * This file contains the definitions for the LCD timings and functions - * to control the LCD power / frontlighting via the w100fb driver. + * Copyright (c) 2003 Ian Molton <spyro@f2s.com> * - * (c) 2005 Ian Molton <spyro@f2s.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. * */ -#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> #include <linux/device.h> -#include <linux/fb.h> -#include <linux/err.h> #include <linux/platform_device.h> +#include <linux/fb.h> + +#include <video/w100fb.h> +#include <asm/setup.h> +#include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <video/w100fb.h> +#include <mach/mfp-pxa25x.h> +#include <mach/hardware.h> +#include <mach/udc.h> + +#include "generic.h" +#include "eseries.h" + +/* ---------------------- E750 LCD definitions -------------------- */ static struct w100_gen_regs e750_lcd_regs = { .lcd_format = 0x00008003, @@ -54,7 +64,6 @@ static struct w100_mode e750_lcd_mode = { .sysclk_src = CLK_SRC_PLL, }; - static struct w100_gpio_regs e750_w100_gpio_info = { .init_data1 = 0x01192f1b, .gpio_dir1 = 0xd5ffdeff, @@ -81,9 +90,6 @@ static struct resource e750_fb_resources[] = { }, }; -/* ----------------------- device declarations -------------------------- */ - - static struct platform_device e750_fb_device = { .name = "w100fb", .id = -1, @@ -94,16 +100,27 @@ static struct platform_device e750_fb_device = { .resource = e750_fb_resources, }; -static int e750_lcd_init(void) -{ - if (!machine_is_e750()) - return -ENODEV; +/* ----------------------------------------------------------------------- */ - return platform_device_register(&e750_fb_device); +static struct platform_device *devices[] __initdata = { + &e750_fb_device, +}; + +static void __init e750_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_udc_info(&e7xx_udc_mach_info); } -module_init(e750_lcd_init); +MACHINE_START(E750, "Toshiba e750") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e750_init, + .timer = &pxa_timer, +MACHINE_END -MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); -MODULE_DESCRIPTION("e750 lcd driver"); -MODULE_LICENSE("GPLv2"); diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800.c index e6aeab0ebc2..a293e09bfe2 100644 --- a/arch/arm/mach-pxa/e800_lcd.c +++ b/arch/arm/mach-pxa/e800.c @@ -1,25 +1,36 @@ -/* e800_lcd.c +/* + * Hardware definitions for the Toshiba eseries PDAs * - * This file contains the definitions for the LCD timings and functions - * to control the LCD power / frontlighting via the w100fb driver. + * Copyright (c) 2003 Ian Molton <spyro@f2s.com> * - * (c) 2005 Ian Molton <spyro@f2s.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. * */ -#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> #include <linux/device.h> -#include <linux/fb.h> -#include <linux/err.h> #include <linux/platform_device.h> +#include <linux/fb.h> + +#include <video/w100fb.h> +#include <asm/setup.h> +#include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <video/w100fb.h> +#include <mach/mfp-pxa25x.h> +#include <mach/hardware.h> +#include <mach/eseries-gpio.h> +#include <mach/udc.h> + +#include "generic.h" +#include "eseries.h" + +/* ------------------------ e800 LCD definitions ------------------------- */ static struct w100_gen_regs e800_lcd_regs = { .lcd_format = 0x00008003, @@ -71,8 +82,8 @@ static struct w100_mode e800_lcd_mode[2] = { .crtc_goe = 0x80cc0015, .crtc_ps1_active = 0x00000000, .pll_freq = 100, - .pixclk_divider = 6, /* Wince uses 14 which gives a 7MHz pclk. */ - .pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */ + .pixclk_divider = 6, /* Wince uses 14 which gives a */ + .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */ .pixclk_src = CLK_SRC_PLL, .sysclk_divider = 0, .sysclk_src = CLK_SRC_PLL, @@ -131,9 +142,6 @@ static struct resource e800_fb_resources[] = { }, }; -/* ----------------------- device declarations -------------------------- */ - - static struct platform_device e800_fb_device = { .name = "w100fb", .id = -1, @@ -144,16 +152,35 @@ static struct platform_device e800_fb_device = { .resource = e800_fb_resources, }; -static int e800_lcd_init(void) -{ - if (!machine_is_e800()) - return -ENODEV; +/* --------------------------- UDC definitions --------------------------- */ + +static struct pxa2xx_udc_mach_info e800_udc_mach_info = { + .gpio_vbus = GPIO_E800_USB_DISC, + .gpio_pullup = GPIO_E800_USB_PULLUP, + .gpio_pullup_inverted = 1 +}; - return platform_device_register(&e800_fb_device); +/* ----------------------------------------------------------------------- */ + +static struct platform_device *devices[] __initdata = { + &e800_fb_device, +}; + +static void __init e800_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_udc_info(&e800_udc_mach_info); } -module_init(e800_lcd_init); +MACHINE_START(E800, "Toshiba e800") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .init_machine = e800_init, + .timer = &pxa_timer, +MACHINE_END -MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); -MODULE_DESCRIPTION("e800 lcd driver"); -MODULE_LICENSE("GPLv2"); diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 7a0a681a584..f5ed8038ede 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -373,10 +373,6 @@ static inline void em_x270_init_nand(void) {} #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int em_x270_ohci_init(struct device *dev) { - /* Set the Power Control Polarity Low */ - UHCHR = (UHCHR | UHCHR_PCPL) & - ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); - /* enable port 2 transiever */ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE; @@ -385,6 +381,7 @@ static int em_x270_ohci_init(struct device *dev) static struct pxaohci_platform_data em_x270_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, .init = em_x270_ohci_init, }; diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 001a252bd51..d28849b50a1 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -19,68 +19,13 @@ #include <mach/mfp-pxa25x.h> #include <mach/hardware.h> +#include <mach/eseries-gpio.h> +#include <mach/udc.h> #include "generic.h" -static unsigned long e740_pin_config[] __initdata = { - /* Chip selects */ - GPIO15_nCS_1, /* CS1 - Flash */ - GPIO79_nCS_3, /* CS3 - IMAGEON */ - GPIO80_nCS_4, /* CS4 - TMIO */ - - /* Clocks */ - GPIO12_32KHz, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_GPIO, /* Used by TMIO for #SUSPEND */ - - /* PC Card */ - GPIO8_GPIO, /* CD0 */ - GPIO44_GPIO, /* CD1 */ - GPIO11_GPIO, /* IRQ0 */ - GPIO6_GPIO, /* IRQ1 */ - GPIO27_GPIO, /* RST0 */ - GPIO24_GPIO, /* RST1 */ - GPIO20_GPIO, /* PWR0 */ - GPIO23_GPIO, /* PWR1 */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO52_nPCE_1, - GPIO53_nPCE_2, - GPIO54_nPSKTSEL, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - - /* wakeup */ - GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, -}; - -static unsigned long e400_pin_config[] __initdata = { - /* Chip selects */ - GPIO15_nCS_1, /* CS1 - Flash */ - GPIO80_nCS_4, /* CS4 - TMIO */ - - /* Clocks */ - GPIO12_32KHz, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_GPIO, /* Used by TMIO for #SUSPEND */ - - /* wakeup */ - GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, -}; - /* Only e800 has 128MB RAM */ -static void __init eseries_fixup(struct machine_desc *desc, +void __init eseries_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { mi->nr_banks=1; @@ -92,95 +37,9 @@ static void __init eseries_fixup(struct machine_desc *desc, mi->bank[0].size = (64*1024*1024); } -static void __init e740_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config)); -} - -static void __init e400_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config)); -} - -/* e-series machine definitions */ - -#ifdef CONFIG_MACH_E330 -MACHINE_START(E330, "Toshiba e330") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .timer = &pxa_timer, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_E350 -MACHINE_START(E350, "Toshiba e350") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .timer = &pxa_timer, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_E740 -MACHINE_START(E740, "Toshiba e740") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e740_init, - .timer = &pxa_timer, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_E750 -MACHINE_START(E750, "Toshiba e750") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .timer = &pxa_timer, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_E400 -MACHINE_START(E400, "Toshiba e400") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .init_machine = e400_init, - .timer = &pxa_timer, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_E800 -MACHINE_START(E800, "Toshiba e800") - /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .boot_params = 0xa0000100, - .map_io = pxa_map_io, - .init_irq = pxa25x_init_irq, - .fixup = eseries_fixup, - .timer = &pxa_timer, -MACHINE_END -#endif +struct pxa2xx_udc_mach_info e7xx_udc_mach_info = { + .gpio_vbus = GPIO_E7XX_USB_DISC, + .gpio_pullup = GPIO_E7XX_USB_PULLUP, + .gpio_pullup_inverted = 1 +}; diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h new file mode 100644 index 00000000000..a83f88d4b6a --- /dev/null +++ b/arch/arm/mach-pxa/eseries.h @@ -0,0 +1,4 @@ +void __init eseries_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi); + +extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info; diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c deleted file mode 100644 index d622c04c0d4..00000000000 --- a/arch/arm/mach-pxa/eseries_udc.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * UDC functions for the Toshiba e-series PDAs - * - * Copyright (c) Ian Molton 2003 - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> - -#include <mach/udc.h> -#include <mach/eseries-gpio.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> -#include <asm/domain.h> - -/* local PXA generic code */ -#include "generic.h" - -static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = { - .gpio_vbus = GPIO_E7XX_USB_DISC, - .gpio_pullup = GPIO_E7XX_USB_PULLUP, - .gpio_pullup_inverted = 1 -}; - -static struct pxa2xx_udc_mach_info e800_udc_mach_info = { - .gpio_vbus = GPIO_E800_USB_DISC, - .gpio_pullup = GPIO_E800_USB_PULLUP, - .gpio_pullup_inverted = 1 -}; - -static int __init eseries_udc_init(void) -{ - if (machine_is_e330() || machine_is_e350() || - machine_is_e740() || machine_is_e750() || - machine_is_e400()) - pxa_set_udc_info(&e7xx_udc_mach_info); - else if (machine_is_e800()) - pxa_set_udc_info(&e800_udc_mach_info); - - return 0; -} - -module_init(eseries_udc_init); - -MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); -MODULE_DESCRIPTION("eseries UDC support"); -MODULE_LICENSE("GPLv2"); diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index ceaed007636..85ed0b33331 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -46,7 +46,7 @@ void clear_reset_status(unsigned int mask) */ unsigned int get_clk_frequency_khz(int info) { - if (cpu_is_pxa21x() || cpu_is_pxa25x()) + if (cpu_is_pxa25x()) return pxa25x_get_clk_frequency_khz(info); else if (cpu_is_pxa27x()) return pxa27x_get_clk_frequency_khz(info); @@ -60,7 +60,7 @@ EXPORT_SYMBOL(get_clk_frequency_khz); */ unsigned int get_memclk_frequency_10khz(void) { - if (cpu_is_pxa21x() || cpu_is_pxa25x()) + if (cpu_is_pxa25x()) return pxa25x_get_memclk_frequency_10khz(); else if (cpu_is_pxa27x()) return pxa27x_get_memclk_frequency_10khz(); @@ -88,11 +88,6 @@ static struct map_desc standard_io_desc[] __initdata = { .pfn = __phys_to_pfn(0x48000000), .length = 0x00200000, .type = MT_DEVICE - }, { /* USB host */ - .virtual = 0xf8000000, - .pfn = __phys_to_pfn(0x4c000000), - .length = 0x00100000, - .type = MT_DEVICE }, { /* Camera */ .virtual = 0xfa000000, .pfn = __phys_to_pfn(0x50000000), diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 041c048320e..dc876a8e666 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -65,4 +65,5 @@ static inline void pxa3xx_clear_reset_status(unsigned int mask) {} extern struct sysdev_class pxa_irq_sysclass; extern struct sysdev_class pxa_gpio_sysclass; +extern struct sysdev_class pxa2xx_mfp_sysclass; extern struct sysdev_class pxa3xx_mfp_sysclass; diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c index 07acc1b2385..14930cf8be7 100644 --- a/arch/arm/mach-pxa/gpio.c +++ b/arch/arm/mach-pxa/gpio.c @@ -16,10 +16,10 @@ #include <linux/module.h> #include <linux/irq.h> #include <linux/sysdev.h> +#include <linux/io.h> #include <asm/gpio.h> #include <mach/hardware.h> -#include <asm/io.h> #include <mach/pxa-regs.h> #include <mach/pxa2xx-gpio.h> @@ -275,7 +275,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) loop = 1; n = PXA_GPIO_IRQ_BASE + bit; - desc_handle_irq(n, irq_desc + n); + generic_handle_irq(n); bit = find_next_bit(gedr, GEDR_BITS, bit + 1); } diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index c0092472fa5..d8962a0fb98 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -20,8 +20,12 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/interrupt.h> +#include <linux/delay.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/gpio.h> +#include <linux/err.h> +#include <linux/clk.h> #include <asm/setup.h> #include <asm/memory.h> @@ -40,7 +44,7 @@ #include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/mfp-pxa25x.h> #include "generic.h" @@ -85,21 +89,8 @@ static struct platform_device *devices[] __initdata = { }; #ifdef CONFIG_MMC_PXA -static struct pxamci_platform_data gumstix_mci_platform_data; - -static int gumstix_mci_init(struct device *dev, irq_handler_t detect_int, - void *data) -{ - pxa_gpio_mode(GPIO6_MMCCLK_MD); - pxa_gpio_mode(GPIO53_MMCCLK_MD); - pxa_gpio_mode(GPIO8_MMCCS0_MD); - - return 0; -} - static struct pxamci_platform_data gumstix_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = gumstix_mci_init, }; static void __init gumstix_mmc_init(void) @@ -109,11 +100,11 @@ static void __init gumstix_mmc_init(void) #else static void __init gumstix_mmc_init(void) { - printk(KERN_INFO "Gumstix mmc disabled\n"); + pr_debug("Gumstix mmc disabled\n"); } #endif -#ifdef CONFIG_USB_GADGET_PXA2XX +#ifdef CONFIG_USB_GADGET_PXA25X static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = { .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, @@ -126,12 +117,87 @@ static void __init gumstix_udc_init(void) #else static void gumstix_udc_init(void) { - printk(KERN_INFO "Gumstix udc is disabled\n"); + pr_debug("Gumstix udc is disabled\n"); } #endif +#ifdef CONFIG_BT +/* Normally, the bootloader would have enabled this 32kHz clock but many +** boards still have u-boot 1.1.4 so we check if it has been turned on and +** if not, we turn it on with a warning message. */ +static void gumstix_setup_bt_clock(void) +{ + int timeout = 500; + + if (!(OSCC & OSCC_OOK)) + pr_warning("32kHz clock was not on. Bootloader may need to " + "be updated\n"); + else + return; + + OSCC |= OSCC_OON; + do { + if (OSCC & OSCC_OOK) + break; + udelay(1); + } while (--timeout); + if (!timeout) + pr_err("Failed to start 32kHz clock\n"); +} + +static void __init gumstix_bluetooth_init(void) +{ + int err; + + gumstix_setup_bt_clock(); + + err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST"); + if (err) { + pr_err("gumstix: failed request gpio for bluetooth reset\n"); + return; + } + + err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1); + if (err) { + pr_err("gumstix: can't reset bluetooth\n"); + return; + } + gpio_set_value(GPIO_GUMSTIX_BTRESET, 0); + udelay(100); + gpio_set_value(GPIO_GUMSTIX_BTRESET, 1); +} +#else +static void gumstix_bluetooth_init(void) +{ + pr_debug("Gumstix Bluetooth is disabled\n"); +} +#endif + +static unsigned long gumstix_pin_config[] __initdata = { + GPIO12_32KHz, + /* BTUART */ + GPIO42_HWUART_RXD, + GPIO43_HWUART_TXD, + GPIO44_HWUART_CTS, + GPIO45_HWUART_RTS, + /* MMC */ + GPIO6_MMC_CLK, + GPIO53_MMC_CLK, + GPIO8_MMC_CS0, + /* these are used by AM200EPD */ + GPIO51_GPIO, + GPIO49_GPIO, + GPIO48_GPIO, + GPIO32_GPIO, + GPIO17_GPIO, + GPIO16_GPIO, +}; + static void __init gumstix_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config)); + + gumstix_bluetooth_init(); gumstix_udc_init(); gumstix_mmc_init(); (void) platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 5aa0270d560..013b15baa03 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -32,7 +32,7 @@ #include <asm/mach/map.h> #include <mach/pxa-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/mfp-pxa25x.h> #include <mach/idp.h> #include <mach/pxafb.h> #include <mach/bitfield.h> @@ -46,6 +46,47 @@ * - Ethernet interrupt */ +static unsigned long idp_pin_config[] __initdata = { + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + + /* Ethernet */ + GPIO33_nCS_5, /* Ethernet CS */ + GPIO4_GPIO, /* Ethernet IRQ */ +}; + static struct resource smc91x_resources[] = { [0] = { .start = (IDP_ETH_PHYS + 0x300), @@ -121,44 +162,28 @@ static struct pxafb_mach_info sharp_lm8v31 = { .num_modes = 1, .cmap_inverse = 0, .cmap_static = 0, - .lccr0 = LCCR0_SDS, - .lccr3 = LCCR3_PCP | LCCR3_Acb(255), + .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL | + LCD_AC_BIAS_FREQ(255), .pxafb_backlight_power = &idp_backlight_power, .pxafb_lcd_power = &idp_lcd_power }; -static int idp_mci_init(struct device *dev, irq_handler_t idp_detect_int, void *data) -{ - /* setup GPIO for PXA25x MMC controller */ - pxa_gpio_mode(GPIO6_MMCCLK_MD); - pxa_gpio_mode(GPIO8_MMCCS0_MD); - - return 0; -} - static struct pxamci_platform_data idp_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = idp_mci_init, }; static void __init idp_init(void) { printk("idp_init()\n"); + pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config)); + platform_device_register(&smc91x_device); //platform_device_register(&mst_audio_device); set_pxa_fb_info(&sharp_lm8v31); pxa_set_mci_info(&idp_mci_platform_data); } -static void __init idp_init_irq(void) -{ - - pxa25x_init_irq(); - - set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE); -} - static struct map_desc idp_io_desc[] __initdata = { { .virtual = IDP_COREVOLT_VIRT, @@ -177,15 +202,6 @@ static void __init idp_map_io(void) { pxa_map_io(); iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc)); - - // serial ports 2 & 3 - pxa_gpio_mode(GPIO42_BTRXD_MD); - pxa_gpio_mode(GPIO43_BTTXD_MD); - pxa_gpio_mode(GPIO44_BTCTS_MD); - pxa_gpio_mode(GPIO45_BTRTS_MD); - pxa_gpio_mode(GPIO46_STRXD_MD); - pxa_gpio_mode(GPIO47_STTXD_MD); - } @@ -194,7 +210,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = idp_map_io, - .init_irq = idp_init_irq, + .init_irq = pxa25x_init_irq, .timer = &pxa_timer, .init_machine = idp_init, MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/akita.h b/arch/arm/mach-pxa/include/mach/akita.h deleted file mode 100644 index 5d8cc1d9cb1..00000000000 --- a/arch/arm/mach-pxa/include/mach/akita.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Hardware specific definitions for SL-C1000 (Akita) - * - * Copyright (c) 2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/* Akita IO Expander GPIOs */ - -#define AKITA_IOEXP_RESERVED_7 (1 << 7) -#define AKITA_IOEXP_IR_ON (1 << 6) -#define AKITA_IOEXP_AKIN_PULLUP (1 << 5) -#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4) -#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3) -#define AKITA_IOEXP_MIC_BIAS (1 << 2) -#define AKITA_IOEXP_RESERVED_1 (1 << 1) -#define AKITA_IOEXP_RESERVED_0 (1 << 0) - -/* Direction Bitfield 0=output 1=input */ -#define AKITA_IOEXP_IO_DIR 0 -/* Default Values */ -#define AKITA_IOEXP_IO_OUT (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP) - -extern struct platform_device akitaioexp_device; - -void akita_set_ioexp(struct device *dev, unsigned char bitmask); -void akita_reset_ioexp(struct device *dev, unsigned char bitmask); - diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h index 39516ced8b1..31abe6d514b 100644 --- a/arch/arm/mach-pxa/include/mach/camera.h +++ b/arch/arm/mach-pxa/include/mach/camera.h @@ -36,8 +36,6 @@ struct pxacamera_platform_data { int (*init)(struct device *); - int (*power)(struct device *, int); - int (*reset)(struct device *, int); unsigned long flags; unsigned long mclk_10khz; diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index bf856503baf..585970ef08c 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -98,12 +98,21 @@ CORGI_SCP_MIC_BIAS ) #define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R ) +#define CORGI_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO) +#define CORGI_GPIO_LED_GREEN (CORGI_SCOOP_GPIO_BASE + 0) +#define CORGI_GPIO_SWA (CORGI_SCOOP_GPIO_BASE + 1) /* Hinge Switch A */ +#define CORGI_GPIO_SWB (CORGI_SCOOP_GPIO_BASE + 2) /* Hinge Switch B */ +#define CORGI_GPIO_MUTE_L (CORGI_SCOOP_GPIO_BASE + 3) +#define CORGI_GPIO_MUTE_R (CORGI_SCOOP_GPIO_BASE + 4) +#define CORGI_GPIO_AKIN_PULLUP (CORGI_SCOOP_GPIO_BASE + 5) +#define CORGI_GPIO_APM_ON (CORGI_SCOOP_GPIO_BASE + 6) +#define CORGI_GPIO_BACKLIGHT_CONT (CORGI_SCOOP_GPIO_BASE + 7) +#define CORGI_GPIO_MIC_BIAS (CORGI_SCOOP_GPIO_BASE + 8) /* * Shared data structures */ extern struct platform_device corgiscoop_device; -extern struct platform_device corgissp_device; #endif /* __ASM_ARCH_CORGI_H */ diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S index de16c12d523..f6b4bf3e73d 100644 --- a/arch/arm/mach-pxa/include/mach/entry-macro.S +++ b/arch/arm/mach-pxa/include/mach/entry-macro.S @@ -41,7 +41,7 @@ and \irqstat, \irqstat, \irqnr clz \irqnr, \irqstat rsb \irqnr, \irqnr, #31 - add \irqnr, \irqnr, #32 + add \irqnr, \irqnr, #(32 + PXA_IRQ(0)) b 1001f 1003: mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP @@ -52,6 +52,6 @@ rsb \irqstat, \irqnr, #0 and \irqstat, \irqstat, \irqnr clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #31 + rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0)) 1001: .endm diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index e89df4d0d23..a582a6d9b92 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -62,26 +62,74 @@ #ifndef __ASSEMBLY__ +#include <asm/cputype.h> + +/* + * CPU Stepping CPU_ID JTAG_ID + * + * PXA210 B0 0x69052922 0x2926C013 + * PXA210 B1 0x69052923 0x3926C013 + * PXA210 B2 0x69052924 0x4926C013 + * PXA210 C0 0x69052D25 0x5926C013 + * + * PXA250 A0 0x69052100 0x09264013 + * PXA250 A1 0x69052101 0x19264013 + * PXA250 B0 0x69052902 0x29264013 + * PXA250 B1 0x69052903 0x39264013 + * PXA250 B2 0x69052904 0x49264013 + * PXA250 C0 0x69052D05 0x59264013 + * + * PXA255 A0 0x69052D06 0x69264013 + * + * PXA26x A0 0x69052903 0x39264013 + * PXA26x B0 0x69052D05 0x59264013 + * + * PXA27x A0 0x69054110 0x09265013 + * PXA27x A1 0x69054111 0x19265013 + * PXA27x B0 0x69054112 0x29265013 + * PXA27x B1 0x69054113 0x39265013 + * PXA27x C0 0x69054114 0x49265013 + * PXA27x C5 0x69054117 0x79265013 + * + * PXA30x A0 0x69056880 0x0E648013 + * PXA30x A1 0x69056881 0x1E648013 + * PXA31x A0 0x69056890 0x0E649013 + * PXA31x A1 0x69056891 0x1E649013 + * PXA31x A2 0x69056892 0x2E649013 + * PXA32x B1 0x69056825 0x5E642013 + * PXA32x B2 0x69056826 0x6E642013 + * + * PXA930 B0 0x69056835 0x5E643013 + * PXA930 B1 0x69056837 0x7E643013 + * PXA930 B2 0x69056838 0x8E643013 + */ #ifdef CONFIG_PXA25x -#define __cpu_is_pxa21x(id) \ +#define __cpu_is_pxa210(id) \ ({ \ - unsigned int _id = (id) >> 4 & 0xf3f; \ - _id == 0x212; \ + unsigned int _id = (id) & 0xf3f0; \ + _id == 0x2120; \ }) -#define __cpu_is_pxa255(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x2d0; \ - }) +#define __cpu_is_pxa250(id) \ + ({ \ + unsigned int _id = (id) & 0xf3ff; \ + _id <= 0x2105; \ + }) + +#define __cpu_is_pxa255(id) \ + ({ \ + unsigned int _id = (id) & 0xffff; \ + _id == 0x2d06; \ + }) #define __cpu_is_pxa25x(id) \ ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x2d0 || _id == 0x290; \ + unsigned int _id = (id) & 0xf300; \ + _id == 0x2100; \ }) #else -#define __cpu_is_pxa21x(id) (0) +#define __cpu_is_pxa210(id) (0) +#define __cpu_is_pxa250(id) (0) #define __cpu_is_pxa255(id) (0) #define __cpu_is_pxa25x(id) (0) #endif @@ -136,9 +184,14 @@ #define __cpu_is_pxa930(id) (0) #endif -#define cpu_is_pxa21x() \ +#define cpu_is_pxa210() \ ({ \ - __cpu_is_pxa21x(read_cpuid_id()); \ + __cpu_is_pxa210(read_cpuid_id()); \ + }) + +#define cpu_is_pxa250() \ + ({ \ + __cpu_is_pxa250(read_cpuid_id()); \ }) #define cpu_is_pxa255() \ @@ -151,6 +204,8 @@ __cpu_is_pxa25x(read_cpuid_id()); \ }) +extern int cpu_is_pxa26x(void); + #define cpu_is_pxa27x() \ ({ \ __cpu_is_pxa27x(read_cpuid_id()); \ diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h index 80596b01344..1a9f65e6ec0 100644 --- a/arch/arm/mach-pxa/include/mach/i2c.h +++ b/arch/arm/mach-pxa/include/mach/i2c.h @@ -65,13 +65,18 @@ struct i2c_pxa_platform_data { unsigned int slave_addr; struct i2c_slave_client *slave; unsigned int class; - int use_pio; + unsigned int use_pio :1; + unsigned int fast_mode :1; }; extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); #ifdef CONFIG_PXA27x -extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info); +extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info); +#endif + +#ifdef CONFIG_PXA3xx +extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info); #endif #endif diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 108b5db9b2a..9c163e19ada 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -11,7 +11,14 @@ */ -#define PXA_IRQ(x) (x) +#ifdef CONFIG_PXA_HAVE_ISA_IRQS +#define PXA_ISA_IRQ(x) (x) +#define PXA_ISA_IRQ_NUM (16) +#else +#define PXA_ISA_IRQ_NUM (0) +#endif + +#define PXA_IRQ(x) (PXA_ISA_IRQ_NUM + (x)) #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */ @@ -73,7 +80,7 @@ #define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */ #endif -#define PXA_GPIO_IRQ_BASE (64) +#define PXA_GPIO_IRQ_BASE PXA_IRQ(64) #define PXA_GPIO_IRQ_NUM (128) #define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) @@ -178,13 +185,7 @@ #define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) #elif defined(CONFIG_SHARP_LOCOMO) #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) -#elif defined(CONFIG_ARCH_LUBBOCK) || \ - defined(CONFIG_MACH_LOGICPD_PXA270) || \ - defined(CONFIG_MACH_TOSA) || \ - defined(CONFIG_MACH_MAINSTONE) || \ - defined(CONFIG_MACH_PCM027) || \ - defined(CONFIG_ARCH_PXA_ESERIES) || \ - defined(CONFIG_MACH_MAGICIAN) +#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS) #define NR_IRQS (IRQ_BOARD_END) #elif defined(CONFIG_MACH_ZYLONITE) #define NR_IRQS (IRQ_BOARD_START + 32) diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h index 79d209b826f..5c4e320c143 100644 --- a/arch/arm/mach-pxa/include/mach/littleton.h +++ b/arch/arm/mach-pxa/include/mach/littleton.h @@ -3,4 +3,6 @@ #define LITTLETON_ETH_PHYS 0x30000000 +#define LITTLETON_GPIO_LCD_CS (17) + #endif /* __ASM_ARCH_ZYLONITE_H */ diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h index 552eb7fa657..59aef89808d 100644 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ b/arch/arm/mach-pxa/include/mach/memory.h @@ -40,11 +40,11 @@ #define NODE_MEM_SIZE_BITS 26 #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -void cmx270_pci_adjust_zones(int node, unsigned long *size, +void cmx2xx_pci_adjust_zones(int node, unsigned long *size, unsigned long *holes); #define arch_adjust_zones(node, size, holes) \ - cmx270_pci_adjust_zones(node, size, holes) + cmx2xx_pci_adjust_zones(node, size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1) #endif diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h index 6c8e72238bf..617cab2cc8d 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h @@ -17,7 +17,7 @@ /* Crystal and Clock Signals */ #define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) -#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW) +#define GPIO70_RTCCLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW) #define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW) #define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) #define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW) @@ -156,6 +156,6 @@ #define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) #define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) #define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) -#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) +#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) #endif /* __ASM_ARCH_MFP_PXA25X_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h index 74990510cf3..67f8385ea54 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h @@ -257,10 +257,10 @@ #define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2) #define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5) -#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT) -#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW) -#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT) -#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW) +#define GPIO69_SSP3_SCLK MFP_CFG_X(GPIO69, AF2, DS08X, FLOAT) +#define GPIO70_SSP3_FRM MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW) +#define GPIO89_SSP3_SCLK MFP_CFG_X(GPIO89, AF1, DS08X, FLOAT) +#define GPIO90_SSP3_FRM MFP_CFG_X(GPIO90, AF1, DS08X, DRIVE_LOW) #define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT) #define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW) #define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT) diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h index 8769567b389..482185053a9 100644 --- a/arch/arm/mach-pxa/include/mach/mfp.h +++ b/arch/arm/mach-pxa/include/mach/mfp.h @@ -274,12 +274,13 @@ typedef unsigned long mfp_cfg_t; #define MFP_DS_MASK (0x7 << 13) #define MFP_DS(x) (((x) >> 13) & 0x7) -#define MFP_LPM_INPUT (0x0 << 16) +#define MFP_LPM_DEFAULT (0x0 << 16) #define MFP_LPM_DRIVE_LOW (0x1 << 16) #define MFP_LPM_DRIVE_HIGH (0x2 << 16) #define MFP_LPM_PULL_LOW (0x3 << 16) #define MFP_LPM_PULL_HIGH (0x4 << 16) #define MFP_LPM_FLOAT (0x5 << 16) +#define MFP_LPM_INPUT (0x6 << 16) #define MFP_LPM_STATE_MASK (0x7 << 16) #define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) @@ -297,7 +298,7 @@ typedef unsigned long mfp_cfg_t; #define MFP_PULL_MASK (0x3 << 21) #define MFP_PULL(x) (((x) >> 21) & 0x3) -#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\ +#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ MFP_LPM_EDGE_NONE | MFP_PULL_NONE) #define MFP_CFG(pin, af) \ diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h new file mode 100644 index 00000000000..8483cb51183 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mioa701.h @@ -0,0 +1,67 @@ +#ifndef _MIOA701_H_ +#define _MIOA701_H_ + +#define MIO_CFG_IN(pin, af) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\ + (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN)) + +#define MIO_CFG_OUT(pin, af, state) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state)) + +/* Global GPIOs */ +#define GPIO9_CHARGE_nEN 9 +#define GPIO18_POWEROFF 18 +#define GPIO87_LCD_POWER 87 + +/* USB */ +#define GPIO13_USB_DETECT 13 +#define GPIO22_USB_ENABLE 22 + +/* SDIO bits */ +#define GPIO78_SDIO_RO 78 +#define GPIO15_SDIO_INSERT 15 +#define GPIO91_SDIO_EN 91 + +/* Bluetooth */ +#define GPIO83_BT_ON 83 + +/* GPS */ +#define GPIO23_GPS_UNKNOWN1 23 +#define GPIO26_GPS_ON 26 +#define GPIO27_GPS_RESET 27 +#define GPIO106_GPS_UNKNOWN2 106 +#define GPIO107_GPS_UNKNOWN3 107 + +/* GSM */ +#define GPIO24_GSM_MOD_RESET_CMD 24 +#define GPIO88_GSM_nMOD_ON_CMD 88 +#define GPIO90_GSM_nMOD_OFF_CMD 90 +#define GPIO114_GSM_nMOD_DTE_UART_STATE 114 +#define GPIO25_GSM_MOD_ON_STATE 25 +#define GPIO113_GSM_EVENT 113 + +/* SOUND */ +#define GPIO12_HPJACK_INSERT 12 + +/* LEDS */ +#define GPIO10_LED_nCharging 10 +#define GPIO97_LED_nBlue 97 +#define GPIO98_LED_nOrange 98 +#define GPIO82_LED_nVibra 82 +#define GPIO115_LED_nKeyboard 115 + +/* Keyboard */ +#define GPIO0_KEY_POWER 0 +#define GPIO93_KEY_VOLUME_UP 93 +#define GPIO94_KEY_VOLUME_DOWN 94 + +extern struct input_dev *mioa701_evdev; +extern void mioa701_gpio_lpm_set(unsigned long mfp_pin); + +/* Assembler externals mioa701_bootresume.S */ +extern u32 mioa701_bootstrap; +extern u32 mioa701_jumpaddr; +extern u32 mioa701_bootstrap_lg; + +#endif /* _MIOA701_H */ diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h index e848a47128c..95b6e2a6e51 100644 --- a/arch/arm/mach-pxa/include/mach/ohci.h +++ b/arch/arm/mach-pxa/include/mach/ohci.h @@ -7,6 +7,22 @@ struct pxaohci_platform_data { int (*init)(struct device *); void (*exit)(struct device *); + unsigned long flags; +#define ENABLE_PORT1 (1 << 0) +#define ENABLE_PORT2 (1 << 1) +#define ENABLE_PORT3 (1 << 2) +#define ENABLE_PORT_ALL (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3) + +#define POWER_SENSE_LOW (1 << 3) +#define POWER_CONTROL_LOW (1 << 4) +#define NO_OC_PROTECTION (1 << 5) +#define OC_MODE_GLOBAL (0 << 6) +#define OC_MODE_PERPORT (1 << 6) + + int power_on_delay; /* Power On to Power Good time - in ms + * HCD must wait for this duration before + * accessing a powered on port + */ int port_mode; #define PMM_NPS_MODE 1 #define PMM_GLOBAL_MODE 2 diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h new file mode 100644 index 00000000000..5032307ebf7 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -0,0 +1,80 @@ +/* + * GPIOs and interrupts for Palm Zire72 Handheld Computer + * + * Authors: Alex Osborne <bobofdoom@gmail.com> + * Jan Herman <2hp@seznam.cz> + * Sergey Lapin <slapin@ossfans.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMZ72_H_ +#define _INCLUDE_PALMZ72_H_ + +/* Power and control */ +#define GPIO_NR_PALMZ72_GPIO_RESET 1 +#define GPIO_NR_PALMZ72_POWER_DETECT 0 + +/* SD/MMC */ +#define GPIO_NR_PALMZ72_SD_DETECT_N 14 +#define GPIO_NR_PALMZ72_SD_POWER_N 98 +#define GPIO_NR_PALMZ72_SD_RO 115 + +/* Touchscreen */ +#define GPIO_NR_PALMZ72_WM9712_IRQ 27 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMZ72_IR_DISABLE 49 + +/* USB */ +#define GPIO_NR_PALMZ72_USB_DETECT_N 15 +#define GPIO_NR_PALMZ72_USB_POWER 95 +#define GPIO_NR_PALMZ72_USB_PULLUP 12 + +/* LCD/Backlight */ +#define GPIO_NR_PALMZ72_BL_POWER 20 +#define GPIO_NR_PALMZ72_LCD_POWER 96 + +/* LED */ +#define GPIO_NR_PALMZ72_LED_GREEN 88 + +/* Bluetooth */ +#define GPIO_NR_PALMZ72_BT_POWER 17 +#define GPIO_NR_PALMZ72_BT_RESET 83 + +/** Initial values **/ + +/* Battery */ +#define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMZ72_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMZ72_MAX_LIFE_MINS 360 /* on-life in minutes */ + +/* Backlight */ +#define PALMZ72_MAX_INTENSITY 0xFE +#define PALMZ72_DEFAULT_INTENSITY 0x7E +#define PALMZ72_LIMIT_MASK 0x7F +#define PALMZ72_PRESCALER 0x3F +#define PALMZ72_PERIOD_NS 3500 + +#ifdef CONFIG_PM +struct palmz72_resume_info { + u32 magic0; /* 0x0 */ + u32 magic1; /* 0x4 */ + u32 resume_addr; /* 0x8 */ + u32 pad[11]; /* 0xc..0x37 */ + u32 arm_control; /* 0x38 */ + u32 aux_control; /* 0x3c */ + u32 ttb; /* 0x40 */ + u32 domain_access; /* 0x44 */ + u32 process_id; /* 0x48 */ +}; +#endif +#endif + diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index 261e5bc958d..83342469aca 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -15,6 +15,8 @@ struct pxa_cpu_pm_fns { void (*restore)(unsigned long *); int (*valid)(suspend_state_t state); void (*enter)(suspend_state_t state); + int (*prepare)(void); + void (*finish)(void); }; extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index 67debc47e8c..0b3e6d051c6 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -23,6 +23,7 @@ #define POODLE_GPIO_AC_IN (1) #define POODLE_GPIO_CO 16 #define POODLE_GPIO_TP_INT (5) +#define POODLE_GPIO_TP_CS (24) #define POODLE_GPIO_WAKEUP (11) /* change battery */ #define POODLE_GPIO_GA_INT (10) #define POODLE_GPIO_IR_ON (22) @@ -70,6 +71,14 @@ #define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) #define POODLE_SCOOP_IO_OUT ( 0 ) +#define POODLE_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO) +#define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0) +#define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2) +#define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7) +#define POODLE_GPIO_L_PCLK (POODLE_SCOOP_GPIO_BASE + 9) +#define POODLE_GPIO_L_LCLK (POODLE_SCOOP_GPIO_BASE + 10) +#define POODLE_GPIO_HS_OUT (POODLE_SCOOP_GPIO_BASE + 11) + #define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8) #define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10) #define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11) diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h index 12288ca3cbb..15295d96000 100644 --- a/arch/arm/mach-pxa/include/mach/pxa-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h @@ -69,30 +69,18 @@ /* * DMA Controller */ - -#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ -#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ -#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ -#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ -#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ -#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ -#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ -#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ -#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ -#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ -#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ -#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ -#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ -#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ -#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ -#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ - #define DCSR(x) __REG2(0x40000000, (x) << 2) #define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ -#ifdef CONFIG_PXA27x +#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ +#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ +#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ +#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ +#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ + +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ #define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ #define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ @@ -101,11 +89,6 @@ #define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ #define DCSR_EORINTR (1 << 9) /* The end of Receive */ #endif -#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ -#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ -#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ -#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ -#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ #define DALGN __REG(0x400000a0) /* DMA Alignment Register */ #define DINT __REG(0x400000f0) /* DMA Interrupt Register */ @@ -114,145 +97,9 @@ &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ &__REG2(0x40001100, ((n) & 0x3f) << 2))) -#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ -#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ -#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ -#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ -#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ -#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ -#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ -#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ -#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ -#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ -#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ -#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ -#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ -#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ -#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ -#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */ -#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */ -#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ -#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ -#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ -#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ -#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ -#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ -#define DRCMR23 __REG(0x4000015c) /* Reserved */ -#define DRCMR24 __REG(0x40000160) /* Reserved */ -#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ -#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ -#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ -#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ -#define DRCMR29 __REG(0x40000174) /* Reserved */ -#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ -#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ -#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ -#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ -#define DRCMR34 __REG(0x40000188) /* Reserved */ -#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ -#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ -#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ -#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ -#define DRCMR39 __REG(0x4000019C) /* Reserved */ -#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */ -#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */ -#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ -#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ -#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ - -#define DRCMRRXSADR DRCMR2 -#define DRCMRTXSADR DRCMR3 -#define DRCMRRXBTRBR DRCMR4 -#define DRCMRTXBTTHR DRCMR5 -#define DRCMRRXFFRBR DRCMR6 -#define DRCMRTXFFTHR DRCMR7 -#define DRCMRRXMCDR DRCMR8 -#define DRCMRRXMODR DRCMR9 -#define DRCMRTXMODR DRCMR10 -#define DRCMRRXPCDR DRCMR11 -#define DRCMRTXPCDR DRCMR12 -#define DRCMRRXSSDR DRCMR13 -#define DRCMRTXSSDR DRCMR14 -#define DRCMRRXSS2DR DRCMR15 -#define DRCMRTXSS2DR DRCMR16 -#define DRCMRRXICDR DRCMR17 -#define DRCMRTXICDR DRCMR18 -#define DRCMRRXSTRBR DRCMR19 -#define DRCMRTXSTTHR DRCMR20 -#define DRCMRRXMMC DRCMR21 -#define DRCMRTXMMC DRCMR22 -#define DRCMRRXSS3DR DRCMR66 -#define DRCMRTXSS3DR DRCMR67 -#define DRCMRUDC(x) DRCMR((x) + 24) - #define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ #define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ -#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ -#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ -#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ -#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ -#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ -#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ -#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ -#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ -#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ -#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ -#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ -#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ -#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ -#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ -#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ -#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ -#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ -#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ -#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ -#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ -#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ -#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ -#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ -#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ -#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ -#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ -#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ -#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ -#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ -#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ -#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ -#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ -#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ -#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ -#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ -#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ -#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ -#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ -#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ -#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ -#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ -#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ -#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ -#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ -#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ -#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ -#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ -#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ -#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ -#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ -#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ -#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ -#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ -#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ -#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ -#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ -#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ -#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ -#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ -#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ -#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ -#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ -#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ -#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ - #define DDADR(x) __REG2(0x40000200, (x) << 4) #define DSADR(x) __REG2(0x40000204, (x) << 4) #define DTADR(x) __REG2(0x40000208, (x) << 4) @@ -418,91 +265,13 @@ /* - * I2C registers + * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c */ -#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ -#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ -#define ICR __REG(0x40301690) /* I2C Control Register - ICR */ -#define ISR __REG(0x40301698) /* I2C Status Register - ISR */ -#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ - -#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ -#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ -#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ -#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ -#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */ - -#define ICR_START (1 << 0) /* start bit */ -#define ICR_STOP (1 << 1) /* stop bit */ -#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ -#define ICR_TB (1 << 3) /* transfer byte bit */ -#define ICR_MA (1 << 4) /* master abort */ -#define ICR_SCLE (1 << 5) /* master clock enable */ -#define ICR_IUE (1 << 6) /* unit enable */ -#define ICR_GCD (1 << 7) /* general call disable */ -#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ -#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ -#define ICR_BEIE (1 << 10) /* enable bus error ints */ -#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ -#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ -#define ICR_SADIE (1 << 13) /* slave address detected int enable */ -#define ICR_UR (1 << 14) /* unit reset */ - -#define ISR_RWM (1 << 0) /* read/write mode */ -#define ISR_ACKNAK (1 << 1) /* ack/nak status */ -#define ISR_UB (1 << 2) /* unit busy */ -#define ISR_IBB (1 << 3) /* bus busy */ -#define ISR_SSD (1 << 4) /* slave stop detected */ -#define ISR_ALD (1 << 5) /* arbitration loss detected */ -#define ISR_ITE (1 << 6) /* tx buffer empty */ -#define ISR_IRF (1 << 7) /* rx buffer full */ -#define ISR_GCAD (1 << 8) /* general call address detected */ -#define ISR_SAD (1 << 9) /* slave address detected */ -#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ - - /* - * Serial Audio Controller + * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c */ -#define SACR0 __REG(0x40400000) /* Global Control Register */ -#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ -#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ -#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ -#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ -#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ -#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ - -#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ -#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ -#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */ -#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */ -#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */ -#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */ -#define SACR0_ENB (1 << 0) /* Enable I2S Link */ -#define SACR1_ENLBF (1 << 5) /* Enable Loopback */ -#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */ -#define SACR1_DREC (1 << 3) /* Disable Recording Function */ -#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */ - -#define SASR0_I2SOFF (1 << 7) /* Controller Status */ -#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */ -#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */ -#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */ -#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */ -#define SASR0_BSY (1 << 2) /* I2S Busy */ -#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */ -#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */ - -#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */ -#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */ - -#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */ -#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */ -#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */ -#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */ - /* * AC97 Controller registers */ @@ -989,77 +758,6 @@ #endif -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -/* - * UHC: USB Host Controller (OHCI-like) register definitions - */ -#define UHC_BASE_PHYS (0x4C000000) -#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ -#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ -#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ -#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ -#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ -#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ -#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ -#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ -#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ -#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ -#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ -#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ -#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ -#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ -#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ -#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ -#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ -#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ - -#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ -#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ - -#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ -#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ -#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ -#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ -#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ - -#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ -#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ -#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ -#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ -#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ -#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ -#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ -#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ -#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ -#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ - -#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ -#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ -#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ -#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ -#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ -#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ -#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ -#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ -#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ -#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ -#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ -#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ - -#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ -#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ -#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ -#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ -#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ -#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort - Interrupt Enable*/ -#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ -#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ - -#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ - -#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ - /* PWRMODE register M field values */ #define PWRMODE_IDLE 0x1 diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index 39eb68319e2..b1fcd10ab6c 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -131,6 +131,28 @@ #define CKENB __REG(0x41340010) /* B Clock Enable Register */ #define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ +#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */ +#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */ +#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */ +#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */ +#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */ + +#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */ +#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */ +#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */ +#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */ +#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */ +#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */ +#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */ + +#define ACCR_SMCFS(x) (((x) & 0x7) << 23) +#define ACCR_SFLFS(x) (((x) & 0x3) << 18) +#define ACCR_XSPCLK(x) (((x) & 0x3) << 16) +#define ACCR_HSS(x) (((x) & 0x3) << 14) +#define ACCR_DMCFS(x) (((x) & 0x3) << 12) +#define ACCR_XN(x) (((x) & 0x7) << 8) +#define ACCR_XL(x) ((x) & 0x1f) + /* * Clock Enable Bit */ diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h index 9489a48871a..7b8842cfa5f 100644 --- a/arch/arm/mach-pxa/include/mach/reset.h +++ b/arch/arm/mach-pxa/include/mach/reset.h @@ -10,9 +10,12 @@ extern unsigned int reset_status; extern void clear_reset_status(unsigned int mask); -/* - * register GPIO as reset generator +/** + * init_gpio_reset() - register GPIO as reset generator + * + * @gpio - gpio nr + * @output - set gpio as out/low instead of input during normal work */ -extern int init_gpio_reset(int gpio); +extern int init_gpio_reset(int gpio, int output); #endif /* __ASM_ARCH_RESET_H */ diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index bd14365f7ed..31ac26b55bc 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -16,6 +16,7 @@ #endif #include <linux/fb.h> +#include <linux/gpio.h> /* Spitz/Akita GPIOs */ @@ -100,13 +101,24 @@ #define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */ #define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */ -#define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ - SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \ +#define SPITZ_SCP_IO_DIR (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ + SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \ SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) #define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R) #define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) #define SPITZ_SCP_SUS_SET 0 +#define SPITZ_SCP_GPIO_BASE (NR_BUILTIN_GPIO) +#define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0) +#define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1) +#define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2) +#define SPITZ_GPIO_MUTE_L (SPITZ_SCP_GPIO_BASE + 3) +#define SPITZ_GPIO_MUTE_R (SPITZ_SCP_GPIO_BASE + 4) +#define SPITZ_GPIO_CF_POWER (SPITZ_SCP_GPIO_BASE + 5) +#define SPITZ_GPIO_LED_ORANGE (SPITZ_SCP_GPIO_BASE + 6) +#define SPITZ_GPIO_JK_A (SPITZ_SCP_GPIO_BASE + 7) +#define SPITZ_GPIO_ADC_TEMP_ON (SPITZ_SCP_GPIO_BASE + 8) + /* Spitz Scoop Device (No. 2) GPIOs */ /* Suspend States in comments */ #define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */ @@ -119,15 +131,36 @@ #define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */ #define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */ -#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ +#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) -#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) +#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) #define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) #define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) +#define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0) +#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1 +#define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2) +#define SPITZ_GPIO_RESERVED_2 (SPITZ_SCP2_GPIO_BASE + 3) +#define SPITZ_GPIO_RESERVED_3 (SPITZ_SCP2_GPIO_BASE + 4) +#define SPITZ_GPIO_RESERVED_4 (SPITZ_SCP2_GPIO_BASE + 5) +#define SPITZ_GPIO_BACKLIGHT_CONT (SPITZ_SCP2_GPIO_BASE + 6) +#define SPITZ_GPIO_BACKLIGHT_ON (SPITZ_SCP2_GPIO_BASE + 7) +#define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8) + +/* Akita IO Expander GPIOs */ +#define AKITA_IOEXP_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0) +#define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1) +#define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2) +#define AKITA_GPIO_BACKLIGHT_ON (AKITA_IOEXP_GPIO_BASE + 3) +#define AKITA_GPIO_BACKLIGHT_CONT (AKITA_IOEXP_GPIO_BASE + 4) +#define AKITA_GPIO_AKIN_PULLUP (AKITA_IOEXP_GPIO_BASE + 5) +#define AKITA_GPIO_IR_ON (AKITA_IOEXP_GPIO_BASE + 6) +#define AKITA_GPIO_RESERVED_7 (AKITA_IOEXP_GPIO_BASE + 7) /* Spitz IRQ Definitions */ @@ -154,5 +187,4 @@ */ extern struct platform_device spitzscoop_device; extern struct platform_device spitzscoop2_device; -extern struct platform_device spitzssp_device; extern struct sharpsl_charger_machinfo spitz_pm_machinfo; diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h index a012882c9ee..cb5cb766f0f 100644 --- a/arch/arm/mach-pxa/include/mach/ssp.h +++ b/arch/arm/mach-pxa/include/mach/ssp.h @@ -20,6 +20,7 @@ #define __ASM_ARCH_SSP_H #include <linux/list.h> +#include <linux/io.h> enum pxa_ssp_type { SSP_UNDEFINED = 0, @@ -78,6 +79,29 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); void ssp_exit(struct ssp_dev *dev); +/** + * ssp_write_reg - Write to a SSP register + * + * @dev: SSP device to access + * @reg: Register to write to + * @val: Value to be written. + */ +static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val) +{ + __raw_writel(val, dev->mmio_base + reg); +} + +/** + * ssp_read_reg - Read from a SSP register + * + * @dev: SSP device to access + * @reg: Register to read from + */ +static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg) +{ + return __raw_readl(dev->mmio_base + reg); +} + struct ssp_device *ssp_request(int port, const char *label); void ssp_free(struct ssp_device *); #endif /* __ASM_ARCH_SSP_H */ diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h index 641d0ec110b..903e1a2e664 100644 --- a/arch/arm/mach-pxa/include/mach/trizeps4.h +++ b/arch/arm/mach-pxa/include/mach/trizeps4.h @@ -17,11 +17,16 @@ #define TRIZEPS4_PIC_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board */ #define TRIZEPS4_SDRAM_BASE 0xa0000000 /* SDRAM region */ -#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board CSFR register */ -#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) /* Logic chip on ConXS-Board BOCR register */ -#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) /* Logic chip on ConXS-Board IRCR register*/ -#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) /* Logic chip on ConXS-Board UPSR register*/ -#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* Logic chip on ConXS-Board DICR register*/ + /* Logic on ConXS-board CSFR register*/ +#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) + /* Logic on ConXS-board BOCR register*/ +#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) + /* Logic on ConXS-board IRCR register*/ +#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) + /* Logic on ConXS-board UPSR register*/ +#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) + /* Logic on ConXS-board DICR register*/ +#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* virtual memory regions */ #define TRIZEPS4_DISK_VIRT 0xF0000000 /* Disk On Chip region */ @@ -54,6 +59,15 @@ #define GPIO_MMC_DET 12 #define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET) +/* DOC NAND chip */ +#define GPIO_DOC_LOCK 94 +#define GPIO_DOC_IRQ 93 +#define TRIZEPS4_DOC_IRQ IRQ_GPIO(GPIO_DOC_IRQ) + +/* SPI interface */ +#define GPIO_SPI 53 +#define TRIZEPS4_SPI_IRQ IRQ_GPIO(GPIO_SPI) + /* LEDS using tx2 / rx2 */ #define GPIO_SYS_BUSY_LED 46 #define GPIO_HEARTBEAT_LED 47 @@ -62,24 +76,66 @@ #define GPIO_PIC 0 #define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC) -#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT) -#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS) +#ifdef CONFIG_MACH_TRIZEPS_CONXS +/* for CONXS base board define these registers */ +#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT) +#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS) -#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT) -#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS) +#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT) +#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS) -#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT) -#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS) +#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT) +#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS) + +#define IRCR_P2V(x) ((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT) +#define IRCR_V2P(x) ((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS) #ifndef __ASSEMBLY__ -#define ConXS_CFSR (*((volatile unsigned short *)CFSR_P2V(0x0C000000))) -#define ConXS_BCR (*((volatile unsigned short *)BCR_P2V(0x0E000000))) -#define ConXS_DCR (*((volatile unsigned short *)DCR_P2V(0x0F800000))) +static inline unsigned short CFSR_readw(void) +{ + /* [Compact Flash Status Register] is read only */ + return *((unsigned short *)CFSR_P2V(0x0C000000)); +} +static inline void BCR_writew(unsigned short value) +{ + /* [Board Control Regsiter] is write only */ + *((unsigned short *)BCR_P2V(0x0E000000)) = value; +} +static inline void DCR_writew(unsigned short value) +{ + /* [Display Control Register] is write only */ + *((unsigned short *)DCR_P2V(0x0E000000)) = value; +} +static inline void IRCR_writew(unsigned short value) +{ + /* [InfraRed data Control Register] is write only */ + *((unsigned short *)IRCR_P2V(0x0E000000)) = value; +} #else #define ConXS_CFSR CFSR_P2V(0x0C000000) #define ConXS_BCR BCR_P2V(0x0E000000) #define ConXS_DCR DCR_P2V(0x0F800000) +#define ConXS_IRCR IRCR_P2V(0x0F800000) #endif +#else +/* for whatever baseboard define function registers */ +static inline unsigned short CFSR_readw(void) +{ + return 0; +} +static inline void BCR_writew(unsigned short value) +{ + ; +} +static inline void DCR_writew(unsigned short value) +{ + ; +} +static inline void IRCR_writew(unsigned short value) +{ + ; +} +#endif /* CONFIG_MACH_TRIZEPS_CONXS */ #define ConXS_CFSR_BVD_MASK 0x0003 #define ConXS_CFSR_BVD1 (1 << 0) diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h new file mode 100644 index 00000000000..10988c270ca --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/viper.h @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-pxa/include/mach/viper.h + * + * Author: Ian Campbell + * Created: Feb 03, 2003 + * Copyright: Arcom Control Systems. + * + * Maintained by Marc Zyngier <maz@misterjones.org> + * <marc.zyngier@altran.com> + * + * Created based on lubbock.h: + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_VIPER_H +#define ARCH_VIPER_H + +#define VIPER_BOOT_PHYS PXA_CS0_PHYS +#define VIPER_FLASH_PHYS PXA_CS1_PHYS +#define VIPER_ETH_PHYS PXA_CS2_PHYS +#define VIPER_USB_PHYS PXA_CS3_PHYS +#define VIPER_ETH_DATA_PHYS PXA_CS4_PHYS +#define VIPER_CPLD_PHYS PXA_CS5_PHYS + +#define VIPER_CPLD_BASE (0xf0000000) +#define VIPER_PC104IO_BASE (0xf1000000) +#define VIPER_USB_BASE (0xf1800000) + +#define VIPER_ETH_GPIO (0) +#define VIPER_CPLD_GPIO (1) +#define VIPER_USB_GPIO (2) +#define VIPER_UARTA_GPIO (4) +#define VIPER_UARTB_GPIO (3) +#define VIPER_CF_CD_GPIO (32) +#define VIPER_CF_RDY_GPIO (8) +#define VIPER_BCKLIGHT_EN_GPIO (9) +#define VIPER_LCD_EN_GPIO (10) +#define VIPER_PSU_DATA_GPIO (6) +#define VIPER_PSU_CLK_GPIO (11) +#define VIPER_UART_SHDN_GPIO (12) +#define VIPER_BRIGHTNESS_GPIO (16) +#define VIPER_PSU_nCS_LD_GPIO (19) +#define VIPER_UPS_GPIO (20) +#define VIPER_CF_POWER_GPIO (82) +#define VIPER_TPM_I2C_SDA_GPIO (26) +#define VIPER_TPM_I2C_SCL_GPIO (27) +#define VIPER_RTC_I2C_SDA_GPIO (83) +#define VIPER_RTC_I2C_SCL_GPIO (84) + +#define VIPER_CPLD_P2V(x) ((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE) +#define VIPER_CPLD_V2P(x) ((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS) + +#ifndef __ASSEMBLY__ +# define __VIPER_CPLD_REG(x) (*((volatile u16 *)VIPER_CPLD_P2V(x))) +#endif + +/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */ + +/* ... Physical addresses */ +#define _VIPER_LO_IRQ_STATUS (VIPER_CPLD_PHYS + 0x100000) +#define _VIPER_ICR_PHYS (VIPER_CPLD_PHYS + 0x100002) +#define _VIPER_HI_IRQ_STATUS (VIPER_CPLD_PHYS + 0x100004) +#define _VIPER_VERSION_PHYS (VIPER_CPLD_PHYS + 0x100006) +#define VIPER_UARTA_PHYS (VIPER_CPLD_PHYS + 0x300010) +#define VIPER_UARTB_PHYS (VIPER_CPLD_PHYS + 0x300000) +#define _VIPER_SRAM_BASE (VIPER_CPLD_PHYS + 0x800000) + +/* ... Virtual addresses */ +#define VIPER_LO_IRQ_STATUS __VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS) +#define VIPER_HI_IRQ_STATUS __VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS) +#define VIPER_VERSION __VIPER_CPLD_REG(_VIPER_VERSION_PHYS) +#define VIPER_ICR __VIPER_CPLD_REG(_VIPER_ICR_PHYS) + +/* Decode VIPER_VERSION register */ +#define VIPER_CPLD_REVISION(x) (((x) >> 5) & 0x7) +#define VIPER_BOARD_VERSION(x) (((x) >> 3) & 0x3) +#define VIPER_BOARD_ISSUE(x) (((x) >> 0) & 0x7) + +/* Interrupt and Configuration Register (VIPER_ICR) */ +/* This is a write only register. Only CF_RST is used under Linux */ + +extern void viper_cf_rst(int state); + +#define VIPER_ICR_RETRIG (1 << 0) +#define VIPER_ICR_AUTO_CLR (1 << 1) +#define VIPER_ICR_R_DIS (1 << 2) +#define VIPER_ICR_CF_RST (1 << 3) + +#endif + diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 5e95c5372fe..fa69c3a6a38 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -57,7 +57,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) pxa_internal_irq_nr = irq_nr; - for (irq = 0; irq < irq_nr; irq += 32) { + for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) { _ICMR(irq) = 0; /* disable all IRQs */ _ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */ } diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c deleted file mode 100644 index 3bc29007df3..00000000000 --- a/arch/arm/mach-pxa/leds-trizeps4.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/leds-trizeps4.c - * - * Author: Jürgen Schindele - * Created: 20 02, 2006 - * Copyright: Jürgen Schindele - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> - -#include <mach/hardware.h> -#include <asm/system.h> -#include <asm/types.h> -#include <asm/leds.h> - -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-gpio.h> -#include <mach/trizeps4.h> - -#include "leds.h" - -#define LED_STATE_ENABLED 1 -#define LED_STATE_CLAIMED 2 - -#define SYS_BUSY 0x01 -#define HEARTBEAT 0x02 -#define BLINK 0x04 - -static unsigned int led_state; -static unsigned int hw_led_state; - -void trizeps4_leds_event(led_event_t evt) -{ - unsigned long flags; - - local_irq_save(flags); - - switch (evt) { - case led_start: - hw_led_state = 0; - pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */ - pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */ - led_state = LED_STATE_ENABLED; - break; - - case led_stop: - led_state &= ~LED_STATE_ENABLED; - break; - - case led_claim: - led_state |= LED_STATE_CLAIMED; - hw_led_state = 0; - break; - - case led_release: - led_state &= ~LED_STATE_CLAIMED; - hw_led_state = 0; - break; - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - hw_led_state ^= HEARTBEAT; - break; -#endif - -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - hw_led_state &= ~SYS_BUSY; - break; - - case led_idle_end: - hw_led_state |= SYS_BUSY; - break; -#endif - - case led_halted: - break; - - case led_green_on: - hw_led_state |= BLINK; - break; - - case led_green_off: - hw_led_state &= ~BLINK; - break; - - case led_amber_on: - break; - - case led_amber_off: - break; - - case led_red_on: - break; - - case led_red_off: - break; - - default: - break; - } - - if (led_state & LED_STATE_ENABLED) { - switch (hw_led_state) { - case 0: - GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED); - GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED); - break; - case 1: - GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED); - GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED); - break; - case 2: - GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED); - GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED); - break; - case 3: - GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED); - GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED); - break; - } - } - else { - /* turn all off */ - GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED); - GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED); - } - - local_irq_restore(flags); -} diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c index e13eb841e48..bbe4d5f6afa 100644 --- a/arch/arm/mach-pxa/leds.c +++ b/arch/arm/mach-pxa/leds.c @@ -24,8 +24,6 @@ pxa_leds_init(void) leds_event = mainstone_leds_event; if (machine_is_pxa_idp()) leds_event = idp_leds_event; - if (machine_is_trizeps4()) - leds_event = trizeps4_leds_event; leds_event(led_start); return 0; diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 58f3402a037..b4d00aba0e3 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/spi/spi.h> #include <linux/smc91x.h> #include <asm/types.h> @@ -38,6 +39,7 @@ #include <mach/gpio.h> #include <mach/pxafb.h> #include <mach/ssp.h> +#include <mach/pxa2xx_spi.h> #include <mach/pxa27x_keypad.h> #include <mach/pxa3xx_nand.h> #include <mach/littleton.h> @@ -72,8 +74,8 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { /* SSP2 */ GPIO25_SSP2_SCLK, - GPIO17_SSP2_FRM, GPIO27_SSP2_TXD, + GPIO17_GPIO, /* SFRM as chip-select */ /* Debug Ethernet */ GPIO90_GPIO, @@ -123,160 +125,6 @@ static struct platform_device smc91x_device = { }; #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) -/* use bit 30, 31 as the indicator of command parameter number */ -#define CMD0(x) ((0x00000000) | ((x) << 9)) -#define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1)) -#define CMD2(x, x1, x2) ((0x80000000) | ((x) << 18) | 0x20000 |\ - ((x1) << 9) | 0x100 | (x2)) - -static uint32_t lcd_panel_reset[] = { - CMD0(0x1), /* reset */ - CMD0(0x0), /* nop */ - CMD0(0x0), /* nop */ - CMD0(0x0), /* nop */ -}; - -static uint32_t lcd_panel_on[] = { - CMD0(0x29), /* Display ON */ - CMD2(0xB8, 0xFF, 0xF9), /* Output Control */ - CMD0(0x11), /* Sleep out */ - CMD1(0xB0, 0x16), /* Wake */ -}; - -static uint32_t lcd_panel_off[] = { - CMD0(0x28), /* Display OFF */ - CMD2(0xB8, 0x80, 0x02), /* Output Control */ - CMD0(0x10), /* Sleep in */ - CMD1(0xB0, 0x00), /* Deep stand by in */ -}; - -static uint32_t lcd_vga_pass_through[] = { - CMD1(0xB0, 0x16), - CMD1(0xBC, 0x80), - CMD1(0xE1, 0x00), - CMD1(0x36, 0x50), - CMD1(0x3B, 0x00), -}; - -static uint32_t lcd_qvga_pass_through[] = { - CMD1(0xB0, 0x16), - CMD1(0xBC, 0x81), - CMD1(0xE1, 0x00), - CMD1(0x36, 0x50), - CMD1(0x3B, 0x22), -}; - -static uint32_t lcd_vga_transfer[] = { - CMD1(0xcf, 0x02), /* Blanking period control (1) */ - CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */ - CMD1(0xd1, 0x01), /* CKV timing control on/off */ - CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */ - CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */ - CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */ - CMD1(0xd5, 0x14), /* ASW timing control (2) */ - CMD0(0x21), /* Invert for normally black display */ - CMD0(0x29), /* Display on */ -}; - -static uint32_t lcd_qvga_transfer[] = { - CMD1(0xd6, 0x02), /* Blanking period control (1) */ - CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */ - CMD1(0xd8, 0x01), /* CKV timing control on/off */ - CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */ - CMD2(0xde, 0x05, 0x0a), /* OEV timing control */ - CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */ - CMD1(0xe0, 0x0a), /* ASW timing control (2) */ - CMD0(0x21), /* Invert for normally black display */ - CMD0(0x29), /* Display on */ -}; - -static uint32_t lcd_panel_config[] = { - CMD2(0xb8, 0xff, 0xf9), /* Output control */ - CMD0(0x11), /* sleep out */ - CMD1(0xba, 0x01), /* Display mode (1) */ - CMD1(0xbb, 0x00), /* Display mode (2) */ - CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */ - CMD1(0xbf, 0x10), /* Drive system change control */ - CMD1(0xb1, 0x56), /* Booster operation setup */ - CMD1(0xb2, 0x33), /* Booster mode setup */ - CMD1(0xb3, 0x11), /* Booster frequency setup */ - CMD1(0xb4, 0x02), /* Op amp/system clock */ - CMD1(0xb5, 0x35), /* VCS voltage */ - CMD1(0xb6, 0x40), /* VCOM voltage */ - CMD1(0xb7, 0x03), /* External display signal */ - CMD1(0xbd, 0x00), /* ASW slew rate */ - CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */ - CMD1(0xc0, 0x11), /* Sleep out FR count (A) */ - CMD1(0xc1, 0x11), /* Sleep out FR count (B) */ - CMD1(0xc2, 0x11), /* Sleep out FR count (C) */ - CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */ - CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */ - CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */ - CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */ - CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */ - CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */ - CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */ - CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */ - CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */ -}; - -static void ssp_reconfig(struct ssp_dev *dev, int nparam) -{ - static int last_nparam = -1; - - /* check if it is necessary to re-config SSP */ - if (nparam == last_nparam) - return; - - ssp_disable(dev); - ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0); - - last_nparam = nparam; -} - -static void ssp_send_cmd(uint32_t *cmd, int num) -{ - static int ssp_initialized; - static struct ssp_dev ssp2; - - int i; - - if (!ssp_initialized) { - ssp_init(&ssp2, 2, SSP_NO_IRQ); - ssp_initialized = 1; - } - - clk_enable(ssp2.ssp->clk); - for (i = 0; i < num; i++, cmd++) { - ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3); - ssp_write_word(&ssp2, *cmd & 0x3fffffff); - - /* FIXME: ssp_flush() is mandatory here to work */ - ssp_flush(&ssp2); - } - clk_disable(ssp2.ssp->clk); -} - -static void littleton_lcd_power(int on, struct fb_var_screeninfo *var) -{ - if (on) { - ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on)); - ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset)); - if (var->xres > 240) { - /* VGA */ - ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through)); - ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config)); - ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer)); - } else { - /* QVGA */ - ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through)); - ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config)); - ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer)); - } - } else - ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off)); -} - static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = { [0] = { /* VGA */ @@ -312,7 +160,6 @@ static struct pxafb_mach_info littleton_lcd_info = { .modes = tpo_tdo24mtea1_modes, .num_modes = 2, .lcd_conn = LCD_COLOR_TFT_16BPP, - .pxafb_lcd_power = littleton_lcd_power, }; static void littleton_init_lcd(void) @@ -323,6 +170,51 @@ static void littleton_init_lcd(void) static inline void littleton_init_lcd(void) {}; #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */ +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) +static struct pxa2xx_spi_master littleton_spi_info = { + .num_chipselect = 1, +}; + +static void littleton_tdo24m_cs(u32 cmd) +{ + gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT)); +} + +static struct pxa2xx_spi_chip littleton_tdo24m_chip = { + .rx_threshold = 1, + .tx_threshold = 1, + .cs_control = littleton_tdo24m_cs, +}; + +static struct spi_board_info littleton_spi_devices[] __initdata = { + { + .modalias = "tdo24m", + .max_speed_hz = 1000000, + .bus_num = 2, + .chip_select = 0, + .controller_data= &littleton_tdo24m_chip, + }, +}; + +static void __init littleton_init_spi(void) +{ + int err; + + err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS"); + if (err) { + pr_warning("failed to request GPIO for LCS CS\n"); + return; + } + + gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1); + + pxa2xx_set_spi_info(2, &littleton_spi_info); + spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices)); +} +#else +static inline void littleton_init_spi(void) {} +#endif + #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) static unsigned int littleton_matrix_key_map[] = { /* KEY(row, col, key_code) */ @@ -433,6 +325,7 @@ static void __init littleton_init(void) */ platform_device_register(&smc91x_device); + littleton_init_spi(); littleton_init_lcd(); littleton_init_keypad(); littleton_init_nand(); diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index b7038948d1d..de3f67daaac 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -40,7 +40,7 @@ #include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/mfp-pxa27x.h> #include <mach/lpd270.h> #include <mach/audio.h> #include <mach/pxafb.h> @@ -51,6 +51,43 @@ #include "generic.h" #include "devices.h" +static unsigned long lpd270_pin_config[] __initdata = { + /* Chip Selects */ + GPIO15_nCS_1, /* Mainboard Flash */ + GPIO78_nCS_2, /* CPLD + Ethernet */ + + /* LCD - 16bpp Active TFT */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + GPIO16_PWM0_OUT, /* Backlight */ + + /* USB Host */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + + /* AC97 */ + GPIO45_AC97_SYSCLK, + + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, +}; static unsigned int lpd270_irq_enabled; @@ -88,8 +125,7 @@ static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc) GEDR(0) = GPIO_bit(0); /* clear useless edge notification */ if (likely(pending)) { irq = LPD270_IRQ(0) + __ffs(pending); - desc = irq_desc + irq; - desc_handle_irq(irq, desc); + generic_handle_irq(irq); pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled; @@ -265,8 +301,8 @@ static struct pxafb_mode_info sharp_lq057q3dc02_mode = { static struct pxafb_mach_info sharp_lq057q3dc02 = { .modes = &sharp_lq057q3dc02_mode, .num_modes = 1, - .lccr0 = 0x07800080, - .lccr3 = 0x00400000, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | + LCD_ALTERNATE_MAPPING, }; /* 12.1" TFT SVGA (LoLo display number 2) */ @@ -287,8 +323,8 @@ static struct pxafb_mode_info sharp_lq121s1dg31_mode = { static struct pxafb_mach_info sharp_lq121s1dg31 = { .modes = &sharp_lq121s1dg31_mode, .num_modes = 1, - .lccr0 = 0x07800080, - .lccr3 = 0x00400000, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | + LCD_ALTERNATE_MAPPING, }; /* 3.6" TFT QVGA (LoLo display number 3) */ @@ -309,8 +345,8 @@ static struct pxafb_mode_info sharp_lq036q1da01_mode = { static struct pxafb_mach_info sharp_lq036q1da01 = { .modes = &sharp_lq036q1da01_mode, .num_modes = 1, - .lccr0 = 0x07800080, - .lccr3 = 0x00400000, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | + LCD_ALTERNATE_MAPPING, }; /* 6.4" TFT VGA (LoLo display number 5) */ @@ -331,8 +367,8 @@ static struct pxafb_mode_info sharp_lq64d343_mode = { static struct pxafb_mach_info sharp_lq64d343 = { .modes = &sharp_lq64d343_mode, .num_modes = 1, - .lccr0 = 0x07800080, - .lccr3 = 0x00400000, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | + LCD_ALTERNATE_MAPPING, }; /* 10.4" TFT VGA (LoLo display number 7) */ @@ -353,8 +389,8 @@ static struct pxafb_mode_info sharp_lq10d368_mode = { static struct pxafb_mach_info sharp_lq10d368 = { .modes = &sharp_lq10d368_mode, .num_modes = 1, - .lccr0 = 0x07800080, - .lccr3 = 0x00400000, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | + LCD_ALTERNATE_MAPPING, }; /* 3.5" TFT QVGA (LoLo display number 8) */ @@ -375,8 +411,8 @@ static struct pxafb_mode_info sharp_lq035q7db02_20_mode = { static struct pxafb_mach_info sharp_lq035q7db02_20 = { .modes = &sharp_lq035q7db02_20_mode, .num_modes = 1, - .lccr0 = 0x07800080, - .lccr3 = 0x00400000, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | + LCD_ALTERNATE_MAPPING, }; static struct pxafb_mach_info *lpd270_lcd_to_use; @@ -411,27 +447,15 @@ static struct platform_device *platform_devices[] __initdata = { &lpd270_flash_device[1], }; -static int lpd270_ohci_init(struct device *dev) -{ - /* setup Port1 GPIO pin. */ - pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ - pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ - - /* Set the Power Control Polarity Low and Power Sense - Polarity Low to active low. */ - UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); - - return 0; -} - static struct pxaohci_platform_data lpd270_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, - .init = lpd270_ohci_init, + .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, }; static void __init lpd270_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config)); + lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; lpd270_flash_data[1].width = 4; @@ -442,12 +466,6 @@ static void __init lpd270_init(void) */ ARB_CNTRL = ARB_CORE_PARK | 0x234; - /* - * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45. - */ - pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); - pxa_gpio_mode(GPIO16_PWM0_MD); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); pxa_set_ac97_info(NULL); @@ -473,15 +491,6 @@ static void __init lpd270_map_io(void) pxa_map_io(); iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc)); - /* initialize sleep mode regs (wake-up sources, etc) */ - PGSR0 = 0x00008800; - PGSR1 = 0x00000002; - PGSR2 = 0x0001FC00; - PGSR3 = 0x00001F81; - PWER = 0xC0000002; - PRER = 0x00000002; - PFER = 0x00000002; - /* for use I SRAM as framebuffer. */ PSLR |= 0x00000F04; PCFR = 0x00000066; diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 4ffdff2d9ff..bff704354c1 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -57,13 +57,36 @@ static unsigned long lubbock_pin_config[] __initdata = { GPIO15_nCS_1, /* CS1 - Flash */ + GPIO78_nCS_2, /* CS2 - Baseboard FGPA */ GPIO79_nCS_3, /* CS3 - SMC ethernet */ + GPIO80_nCS_4, /* CS4 - SA1111 */ /* SSP data pins */ GPIO23_SSP1_SCLK, GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, + /* LCD - 16bpp DSTN */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + /* BTUART */ GPIO42_BTUART_RXD, GPIO43_BTUART_TXD, @@ -132,8 +155,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc) GEDR(0) = GPIO_bit(0); /* clear our parent irq */ if (likely(pending)) { irq = LUBBOCK_IRQ(0) + __ffs(pending); - desc = irq_desc + irq; - desc_handle_irq(irq, desc); + generic_handle_irq(irq); } pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; } while (pending); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 143f28adaf9..519138bc5f8 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -409,7 +409,7 @@ static struct platform_device backlight = { * LEDs */ -struct gpio_led gpio_leds[] = { +static struct gpio_led gpio_leds[] = { { .name = "magician::vibra", .default_trigger = "none", @@ -669,18 +669,10 @@ static struct pxamci_platform_data magician_mci_info = { * USB OHCI */ -static int magician_ohci_init(struct device *dev) -{ - UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) & - ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE); - - return 0; -} - static struct pxaohci_platform_data magician_ohci_info = { - .port_mode = PMM_PERPORT_MODE, - .init = magician_ohci_init, - .power_budget = 0, + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW, + .power_budget = 0, }; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d44af761564..f2c7ad8f2b6 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -162,8 +162,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc) GEDR(0) = GPIO_bit(0); /* clear useless edge notification */ if (likely(pending)) { irq = MAINSTONE_IRQ(0) + __ffs(pending); - desc = irq_desc + irq; - desc_handle_irq(irq, desc); + generic_handle_irq(irq); } pending = MST_INTSETCLR & mainstone_irq_enabled; } while (pending); @@ -508,19 +507,9 @@ static struct platform_device *platform_devices[] __initdata = { &mst_gpio_keys_device, }; -static int mainstone_ohci_init(struct device *dev) -{ - /* Set the Power Control Polarity Low and Power Sense - Polarity Low to active low. */ - UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); - - return 0; -} - static struct pxaohci_platform_data mainstone_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, - .init = mainstone_ohci_init, + .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, }; #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 925575f10ac..2061c00c8ea 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -25,7 +25,12 @@ #include "generic.h" -#define PGSR(x) __REG2(0x40F00020, ((x) & 0x60) >> 3) +#define gpio_to_bank(gpio) ((gpio) >> 5) + +#define PGSR(x) __REG2(0x40F00020, (x) << 2) +#define __GAFR(u, x) __REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3) +#define GAFR_L(x) __GAFR(0, x) +#define GAFR_U(x) __GAFR(1, x) #define PWER_WE35 (1 << 24) @@ -38,49 +43,59 @@ struct gpio_desc { }; static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1]; +static int gpio_nr; -static int __mfp_config_lpm(unsigned gpio, unsigned long lpm) -{ - unsigned mask = GPIO_bit(gpio); - - /* low power state */ - switch (lpm) { - case MFP_LPM_DRIVE_HIGH: - PGSR(gpio) |= mask; - break; - case MFP_LPM_DRIVE_LOW: - PGSR(gpio) &= ~mask; - break; - case MFP_LPM_INPUT: - break; - default: - pr_warning("%s: invalid low power state for GPIO%d\n", - __func__, gpio); - return -EINVAL; - } - return 0; -} +static unsigned long gpdr_lpm[4]; static int __mfp_config_gpio(unsigned gpio, unsigned long c) { unsigned long gafr, mask = GPIO_bit(gpio); - int fn; + int bank = gpio_to_bank(gpio); + int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */ + int shft = (gpio & 0xf) << 1; + int fn = MFP_AF(c); + int dir = c & MFP_DIR_OUT; - fn = MFP_AF(c); if (fn > 3) return -EINVAL; - /* alternate function and direction */ - gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2)); - GAFR(gpio) = gafr | (fn << ((gpio & 0xf) * 2)); + /* alternate function and direction at run-time */ + gafr = (uorl == 0) ? GAFR_L(bank) : GAFR_U(bank); + gafr = (gafr & ~(0x3 << shft)) | (fn << shft); - if (c & MFP_DIR_OUT) + if (uorl == 0) + GAFR_L(bank) = gafr; + else + GAFR_U(bank) = gafr; + + if (dir == MFP_DIR_OUT) GPDR(gpio) |= mask; else GPDR(gpio) &= ~mask; - if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK)) - return -EINVAL; + /* alternate function and direction at low power mode */ + switch (c & MFP_LPM_STATE_MASK) { + case MFP_LPM_DRIVE_HIGH: + PGSR(bank) |= mask; + dir = MFP_DIR_OUT; + break; + case MFP_LPM_DRIVE_LOW: + PGSR(bank) &= ~mask; + dir = MFP_DIR_OUT; + break; + case MFP_LPM_DEFAULT: + break; + default: + /* warning and fall through, treat as MFP_LPM_DEFAULT */ + pr_warning("%s: GPIO%d: unsupported low power mode\n", + __func__, gpio); + break; + } + + if (dir == MFP_DIR_OUT) + gpdr_lpm[bank] |= mask; + else + gpdr_lpm[bank] &= ~mask; /* give early warning if MFP_LPM_CAN_WAKEUP is set on the * configurations of those pins not able to wakeup @@ -91,7 +106,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) return -EINVAL; } - if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) { + if ((c & MFP_LPM_CAN_WAKEUP) && (dir == MFP_DIR_OUT)) { pr_warning("%s: output GPIO%d unable to wakeup\n", __func__, gpio); return -EINVAL; @@ -135,7 +150,7 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num) void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm) { - unsigned long flags; + unsigned long flags, c; int gpio; gpio = __mfp_validate(mfp); @@ -143,7 +158,11 @@ void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm) return; local_irq_save(flags); - __mfp_config_lpm(gpio, lpm); + + c = gpio_desc[gpio].config; + c = (c & ~MFP_LPM_STATE_MASK) | lpm; + __mfp_config_gpio(gpio, c); + local_irq_restore(flags); } @@ -187,23 +206,22 @@ int gpio_set_wake(unsigned int gpio, unsigned int on) } #ifdef CONFIG_PXA25x -static int __init pxa25x_mfp_init(void) +static void __init pxa25x_mfp_init(void) { int i; - if (cpu_is_pxa25x()) { - for (i = 0; i <= 84; i++) - gpio_desc[i].valid = 1; + for (i = 0; i <= 84; i++) + gpio_desc[i].valid = 1; - for (i = 0; i <= 15; i++) { - gpio_desc[i].can_wakeup = 1; - gpio_desc[i].mask = GPIO_bit(i); - } + for (i = 0; i <= 15; i++) { + gpio_desc[i].can_wakeup = 1; + gpio_desc[i].mask = GPIO_bit(i); } - return 0; + gpio_nr = 85; } -postcore_initcall(pxa25x_mfp_init); +#else +static inline void pxa25x_mfp_init(void) {} #endif /* CONFIG_PXA25x */ #ifdef CONFIG_PXA27x @@ -233,45 +251,106 @@ int keypad_set_wake(unsigned int on) return 0; } -static int __init pxa27x_mfp_init(void) +static void __init pxa27x_mfp_init(void) { int i, gpio; - if (cpu_is_pxa27x()) { - for (i = 0; i <= 120; i++) { - /* skip GPIO2, 5, 6, 7, 8, they are not - * valid pins allow configuration - */ - if (i == 2 || i == 5 || i == 6 || - i == 7 || i == 8) - continue; + for (i = 0; i <= 120; i++) { + /* skip GPIO2, 5, 6, 7, 8, they are not + * valid pins allow configuration + */ + if (i == 2 || i == 5 || i == 6 || i == 7 || i == 8) + continue; - gpio_desc[i].valid = 1; - } + gpio_desc[i].valid = 1; + } - /* Keypad GPIOs */ - for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { - gpio = pxa27x_pkwr_gpio[i]; - gpio_desc[gpio].can_wakeup = 1; - gpio_desc[gpio].keypad_gpio = 1; - gpio_desc[gpio].mask = 1 << i; - } + /* Keypad GPIOs */ + for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { + gpio = pxa27x_pkwr_gpio[i]; + gpio_desc[gpio].can_wakeup = 1; + gpio_desc[gpio].keypad_gpio = 1; + gpio_desc[gpio].mask = 1 << i; + } - /* Overwrite GPIO13 as a PWER wakeup source */ - for (i = 0; i <= 15; i++) { - /* skip GPIO2, 5, 6, 7, 8 */ - if (GPIO_bit(i) & 0x1e4) - continue; + /* Overwrite GPIO13 as a PWER wakeup source */ + for (i = 0; i <= 15; i++) { + /* skip GPIO2, 5, 6, 7, 8 */ + if (GPIO_bit(i) & 0x1e4) + continue; - gpio_desc[i].can_wakeup = 1; - gpio_desc[i].mask = GPIO_bit(i); - } + gpio_desc[i].can_wakeup = 1; + gpio_desc[i].mask = GPIO_bit(i); + } + + gpio_desc[35].can_wakeup = 1; + gpio_desc[35].mask = PWER_WE35; + + gpio_nr = 121; +} +#else +static inline void pxa27x_mfp_init(void) {} +#endif /* CONFIG_PXA27x */ + +#ifdef CONFIG_PM +static unsigned long saved_gafr[2][4]; +static unsigned long saved_gpdr[4]; - gpio_desc[35].can_wakeup = 1; - gpio_desc[35].mask = PWER_WE35; +static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) +{ + int i; + + for (i = 0; i <= gpio_to_bank(gpio_nr); i++) { + + saved_gafr[0][i] = GAFR_L(i); + saved_gafr[1][i] = GAFR_U(i); + saved_gpdr[i] = GPDR(i * 32); + + GPDR(i * 32) = gpdr_lpm[i]; } + return 0; +} +static int pxa2xx_mfp_resume(struct sys_device *d) +{ + int i; + + for (i = 0; i <= gpio_to_bank(gpio_nr); i++) { + GAFR_L(i) = saved_gafr[0][i]; + GAFR_U(i) = saved_gafr[1][i]; + GPDR(i * 32) = saved_gpdr[i]; + } + PSSR = PSSR_RDH | PSSR_PH; return 0; } -postcore_initcall(pxa27x_mfp_init); -#endif /* CONFIG_PXA27x */ +#else +#define pxa2xx_mfp_suspend NULL +#define pxa2xx_mfp_resume NULL +#endif + +struct sysdev_class pxa2xx_mfp_sysclass = { + .name = "mfp", + .suspend = pxa2xx_mfp_suspend, + .resume = pxa2xx_mfp_resume, +}; + +static int __init pxa2xx_mfp_init(void) +{ + int i; + + if (!cpu_is_pxa2xx()) + return 0; + + if (cpu_is_pxa25x()) + pxa25x_mfp_init(); + + if (cpu_is_pxa27x()) + pxa27x_mfp_init(); + + /* initialize gafr_run[], pgsr_lpm[] from existing values */ + for (i = 0; i <= gpio_to_bank(gpio_nr); i++) + gpdr_lpm[i] = GPDR(i * 32); + + return sysdev_class_register(&pxa2xx_mfp_sysclass); +} +postcore_initcall(pxa2xx_mfp_init); diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c new file mode 100644 index 00000000000..0842c531ee4 --- /dev/null +++ b/arch/arm/mach-pxa/mioa701.c @@ -0,0 +1,905 @@ +/* + * Handles the Mitac Mio A701 Board + * + * Copyright (C) 2008 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/gpio_keys.h> +#include <linux/pwm_backlight.h> +#include <linux/rtc.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/pda_power.h> +#include <linux/power_supply.h> +#include <linux/wm97xx.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x_keypad.h> +#include <mach/pxafb.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mmc.h> +#include <mach/udc.h> +#include <mach/pxa27x-udc.h> + +#include <mach/mioa701.h> + +#include "generic.h" +#include "devices.h" + +static unsigned long mioa701_pin_config[] = { + /* Mio global */ + MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW), + MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW), + MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH), + MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH), + + /* Backlight PWM 0 */ + GPIO16_PWM0_OUT, + + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + MIO_CFG_IN(GPIO78_SDIO_RO, AF0), + MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0), + MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW), + + /* USB */ + MIO_CFG_IN(GPIO13_USB_DETECT, AF0), + MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW), + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + + /* Bluetooth */ + GPIO44_BTUART_CTS, + GPIO42_BTUART_RXD, + GPIO45_BTUART_RTS, + GPIO43_BTUART_TXD, + MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW), + + /* GPS */ + MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW), + MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW), + MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW), + MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW), + MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW), + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* GSM */ + MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW), + MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH), + MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH), + MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH), + MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0), + MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH, + GPIO34_FFUART_RXD, + GPIO35_FFUART_CTS, + GPIO36_FFUART_DCD, + GPIO37_FFUART_DSR, + GPIO39_FFUART_TXD, + GPIO40_FFUART_DTR, + GPIO41_FFUART_RTS, + + /* Sound */ + GPIO89_AC97_SYSCLK, + MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0), + + /* Leds */ + MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH), + MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH), + MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH), + MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH), + MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH), + + /* Keyboard */ + MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH, + MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0), + MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0), + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + + /* Unknown */ + MFP_CFG_IN(GPIO14, AF0), + MFP_CFG_IN(GPIO20, AF0), + MFP_CFG_IN(GPIO21, AF0), + MFP_CFG_IN(GPIO33, AF0), + MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH), + MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH), + MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH), + MFP_CFG_IN(GPIO80, AF0), + MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH), + MFP_CFG_IN(GPIO96, AF0), + MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), +}; + +#define MIO_GPIO_IN(num, _desc) \ + { .gpio = (num), .dir = 0, .desc = (_desc) } +#define MIO_GPIO_OUT(num, _init, _desc) \ + { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) } +struct gpio_ress { + unsigned gpio : 8; + unsigned dir : 1; + unsigned init : 1; + char *desc; +}; + +static int mio_gpio_request(struct gpio_ress *gpios, int size) +{ + int i, rc = 0; + int gpio; + int dir; + + for (i = 0; (!rc) && (i < size); i++) { + gpio = gpios[i].gpio; + dir = gpios[i].dir; + rc = gpio_request(gpio, gpios[i].desc); + if (rc) { + printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n", + gpio, gpios[i].desc, rc); + continue; + } + if (dir) + gpio_direction_output(gpio, gpios[i].init); + else + gpio_direction_input(gpio); + } + while ((rc) && (--i >= 0)) + gpio_free(gpios[i].gpio); + return rc; +} + +static void mio_gpio_free(struct gpio_ress *gpios, int size) +{ + int i; + + for (i = 0; i < size; i++) + gpio_free(gpios[i].gpio); +} + +/* LCD Screen and Backlight */ +static struct platform_pwm_backlight_data mioa701_backlight_data = { + .pwm_id = 0, + .max_brightness = 100, + .dft_brightness = 50, + .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */ +}; + +/* + * LTM0305A776C LCD panel timings + * + * see: + * - the LTM0305A776C datasheet, + * - and the PXA27x Programmers' manual + */ +static struct pxafb_mode_info mioa701_ltm0305a776c = { + .pixclock = 220000, /* CLK=4.545 MHz */ + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 4, + .vsync_len = 2, + .left_margin = 6, + .right_margin = 4, + .upper_margin = 5, + .lower_margin = 3, +}; + +static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si) +{ + gpio_set_value(GPIO87_LCD_POWER, on); +} + +static struct pxafb_mach_info mioa701_pxafb_info = { + .modes = &mioa701_ltm0305a776c, + .num_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, + .pxafb_lcd_power = mioa701_lcd_power, +}; + +/* + * Keyboard configuration + */ +static unsigned int mioa701_matrix_keys[] = { + KEY(0, 0, KEY_UP), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_MEDIA), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_ENTER), + KEY(1, 2, KEY_CONNECT), /* GPS key */ + KEY(2, 0, KEY_LEFT), + KEY(2, 1, KEY_PHONE), /* Phone Green key */ + KEY(2, 2, KEY_CAMERA) /* Camera key */ +}; +static struct pxa27x_keypad_platform_data mioa701_keypad_info = { + .matrix_key_rows = 3, + .matrix_key_cols = 3, + .matrix_key_map = mioa701_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys), +}; + +/* + * GPIO Key Configuration + */ +#define MIO_KEY(key, _gpio, _desc, _wakeup) \ + { .code = (key), .gpio = (_gpio), .active_low = 0, \ + .desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) } +static struct gpio_keys_button mioa701_button_table[] = { + MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1), + MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0), + MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0), + MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0) +}; + +static struct gpio_keys_platform_data mioa701_gpio_keys_data = { + .buttons = mioa701_button_table, + .nbuttons = ARRAY_SIZE(mioa701_button_table), +}; + +/* + * Leds and vibrator + */ +#define ONE_LED(_gpio, _name) \ +{ .gpio = (_gpio), .name = (_name), .active_low = true } +static struct gpio_led gpio_leds[] = { + ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"), + ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"), + ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"), + ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"), + ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard") +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +/* + * GSM Sagem XS200 chip + * + * GSM handling was purged from kernel. For history, this is the way to go : + * - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1 + * GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1 + * - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100), + * GPIO24_GSM_MOD_RESET_CMD = 0 + * - turn on : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000), + * GPIO88_GSM_nMOD_ON_CMD = 1 + * - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000), + * GPIO90_GSM_nMOD_OFF_CMD = 1 + */ +static int is_gsm_on(void) +{ + int is_on; + + is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE); + return is_on; +} + +irqreturn_t gsm_on_irq(int irq, void *p) +{ + printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n", + is_gsm_on() ? "on" : "off"); + return IRQ_HANDLED; +} + +struct gpio_ress gsm_gpios[] = { + MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"), + MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"), +}; + +static int __init gsm_init(void) +{ + int rc; + + rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios)); + if (rc) + goto err_gpio; + rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "GSM XS200 Power Irq", NULL); + if (rc) + goto err_irq; + + gpio_set_wake(GPIO113_GSM_EVENT, 1); + return 0; + +err_irq: + printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n"); + mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios)); +err_gpio: + printk(KERN_ERR "Mioa701: gsm not available\n"); + return rc; +} + +static void gsm_exit(void) +{ + free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL); + mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios)); +} + +/* + * Bluetooth BRF6150 chip + * + * BT handling was purged from kernel. For history, this is the way to go : + * - turn on : GPIO83_BT_ON = 1 + * - turn off : GPIO83_BT_ON = 0 + */ + +/* + * GPS Sirf Star III chip + * + * GPS handling was purged from kernel. For history, this is the way to go : + * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0 + * GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0 + * - turn on : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1 + * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0 + */ + +/* + * USB UDC + */ +static void udc_power_command(int cmd) +{ + switch (cmd) { + case PXA2XX_UDC_CMD_DISCONNECT: + gpio_set_value(GPIO22_USB_ENABLE, 0); + break; + case PXA2XX_UDC_CMD_CONNECT: + gpio_set_value(GPIO22_USB_ENABLE, 1); + break; + default: + printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd); + break; + } +} + +static int is_usb_connected(void) +{ + return !!gpio_get_value(GPIO13_USB_DETECT); +} + +static struct pxa2xx_udc_mach_info mioa701_udc_info = { + .udc_is_connected = is_usb_connected, + .udc_command = udc_power_command, +}; + +struct gpio_ress udc_gpios[] = { + MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable") +}; + +static int __init udc_init(void) +{ + pxa_set_udc_info(&mioa701_udc_info); + return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios)); +} + +static void udc_exit(void) +{ + mio_gpio_free(ARRAY_AND_SIZE(udc_gpios)); +} + +/* + * SDIO/MMC Card controller + */ +static void mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + + if ((1 << vdd) & p_d->ocr_mask) + gpio_set_value(GPIO91_SDIO_EN, 1); /* enable SDIO power */ + else + gpio_set_value(GPIO91_SDIO_EN, 0); /* disable SDIO power */ +} + +static int mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO78_SDIO_RO); +} + +struct gpio_ress mci_gpios[] = { + MIO_GPIO_IN(GPIO78_SDIO_RO, "SDIO readonly detect"), + MIO_GPIO_IN(GPIO15_SDIO_INSERT, "SDIO insertion detect"), + MIO_GPIO_OUT(GPIO91_SDIO_EN, 0, "SDIO power enable") +}; + +static void mci_exit(struct device *dev, void *data) +{ + mio_gpio_free(ARRAY_AND_SIZE(mci_gpios)); + free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data); +} + +static struct pxamci_platform_data mioa701_mci_info; + +/** + * The card detect interrupt isn't debounced so we delay it by 250ms + * to give the card a chance to fully insert/eject. + */ +static int mci_init(struct device *dev, irq_handler_t detect_int, void *data) +{ + int rc; + int irq = gpio_to_irq(GPIO15_SDIO_INSERT); + + rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios)); + if (rc) + goto err_gpio; + /* enable RE/FE interrupt on card insertion and removal */ + rc = request_irq(irq, detect_int, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + "MMC card detect", data); + if (rc) + goto err_irq; + + mioa701_mci_info.detect_delay = msecs_to_jiffies(250); + return 0; + +err_irq: + dev_err(dev, "mioa701_mci_init: MMC/SD:" + " can't request MMC card detect IRQ\n"); + mio_gpio_free(ARRAY_AND_SIZE(mci_gpios)); +err_gpio: + return rc; +} + +static struct pxamci_platform_data mioa701_mci_info = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .init = mci_init, + .get_ro = mci_get_ro, + .setpower = mci_setpower, + .exit = mci_exit, +}; + +/* FlashRAM */ +static struct resource strataflash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct physmap_flash_data strataflash_data = { + .width = 2, + /* .set_vpp = mioa701_set_vpp, */ +}; + +static struct platform_device strataflash = { + .name = "physmap-flash", + .id = -1, + .resource = &strataflash_resource, + .num_resources = 1, + .dev = { + .platform_data = &strataflash_data, + }, +}; + +/* + * Suspend/Resume bootstrap management + * + * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled, + * this sequence is as follows : + * - disables interrupts + * - initialize SDRAM (self refresh RAM into active RAM) + * - initialize GPIOs (depends on value at 0xa020b020) + * - initialize coprossessors + * - if edge detect on PWR_SCL(GPIO3), then proceed to cold start + * - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start + * - else do a resume, ie. jump to addr 0xa0100000 + */ +#define RESUME_ENABLE_ADDR 0xa020b000 +#define RESUME_ENABLE_VAL 0x0f0f0f0f +#define RESUME_BT_ADDR 0xa020b020 +#define RESUME_UNKNOWN_ADDR 0xa020b024 +#define RESUME_VECTOR_ADDR 0xa0100000 +#define BOOTSTRAP_WORDS mioa701_bootstrap_lg/4 + +static u32 *save_buffer; + +static void install_bootstrap(void) +{ + int i; + u32 *rom_bootstrap = phys_to_virt(RESUME_VECTOR_ADDR); + u32 *src = &mioa701_bootstrap; + + for (i = 0; i < BOOTSTRAP_WORDS; i++) + rom_bootstrap[i] = src[i]; +} + + +static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state) +{ + int i = 0, is_bt_on; + u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR); + u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR); + u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR); + u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR); + + /* Devices prepare suspend */ + is_bt_on = gpio_get_value(GPIO83_BT_ON); + pxa2xx_mfp_set_lpm(GPIO83_BT_ON, + is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW); + + for (i = 0; i < BOOTSTRAP_WORDS; i++) + save_buffer[i] = mem_resume_vector[i]; + save_buffer[i++] = *mem_resume_enabler; + save_buffer[i++] = *mem_resume_bt; + save_buffer[i++] = *mem_resume_unknown; + + *mem_resume_enabler = RESUME_ENABLE_VAL; + *mem_resume_bt = is_bt_on; + + install_bootstrap(); + return 0; +} + +static int mioa701_sys_resume(struct sys_device *sysdev) +{ + int i = 0; + u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR); + u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR); + u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR); + u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR); + + for (i = 0; i < BOOTSTRAP_WORDS; i++) + mem_resume_vector[i] = save_buffer[i]; + *mem_resume_enabler = save_buffer[i++]; + *mem_resume_bt = save_buffer[i++]; + *mem_resume_unknown = save_buffer[i++]; + + return 0; +} + +static struct sysdev_class mioa701_sysclass = { + .name = "mioa701", +}; + +static struct sys_device sysdev_bootstrap = { + .cls = &mioa701_sysclass, +}; + +static struct sysdev_driver driver_bootstrap = { + .suspend = &mioa701_sys_suspend, + .resume = &mioa701_sys_resume, +}; + +static int __init bootstrap_init(void) +{ + int rc; + int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3); + + rc = sysdev_class_register(&mioa701_sysclass); + if (rc) { + printk(KERN_ERR "Failed registering mioa701 sys class\n"); + return -ENODEV; + } + rc = sysdev_register(&sysdev_bootstrap); + if (rc) { + printk(KERN_ERR "Failed registering mioa701 sys device\n"); + return -ENODEV; + } + rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap); + if (rc) { + printk(KERN_ERR "Failed registering PMU sys driver\n"); + return -ENODEV; + } + + save_buffer = kmalloc(save_size, GFP_KERNEL); + if (!save_buffer) + return -ENOMEM; + printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n", + save_size); + return 0; +} + +static void bootstrap_exit(void) +{ + kfree(save_buffer); + sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap); + sysdev_unregister(&sysdev_bootstrap); + sysdev_class_unregister(&mioa701_sysclass); + + printk(KERN_CRIT "Unregistering mioa701 suspend will hang next" + "resume !!!\n"); +} + +/* + * Power Supply + */ +static char *supplicants[] = { + "mioa701_battery" +}; + +static void mioa701_set_charge(int flags) +{ + gpio_set_value(GPIO9_CHARGE_nEN, !flags); +} + +static struct pda_power_pdata power_pdata = { + .is_ac_online = is_usb_connected, + .set_charge = mioa701_set_charge, + .supplied_to = supplicants, + .num_supplicants = ARRAY_SIZE(supplicants), +}; + +static struct resource power_resources[] = { + [0] = { + .name = "ac", + .start = gpio_to_irq(GPIO13_USB_DETECT), + .end = gpio_to_irq(GPIO13_USB_DETECT), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct platform_device power_dev = { + .name = "pda-power", + .id = -1, + .resource = power_resources, + .num_resources = ARRAY_SIZE(power_resources), + .dev = { + .platform_data = &power_pdata, + }, +}; + +#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX) +static struct wm97xx *battery_wm; + +static enum power_supply_property battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, /* Necessary for apm */ +}; + +static int get_battery_voltage(void) +{ + int adc = -1; + + if (battery_wm) + adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1); + return adc; +} + +static int get_battery_status(struct power_supply *b) +{ + int status; + + if (is_usb_connected()) + status = POWER_SUPPLY_STATUS_CHARGING; + else + status = POWER_SUPPLY_STATUS_DISCHARGING; + + return status; +} + +static int get_property(struct power_supply *b, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int rc = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = get_battery_status(b); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = 0xfd0; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = 0xc00; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = get_battery_voltage(); + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = 100; + break; + default: + val->intval = -1; + rc = -1; + } + + return rc; +}; + +static struct power_supply battery_ps = { + .name = "mioa701_battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .get_property = get_property, + .properties = battery_props, + .num_properties = ARRAY_SIZE(battery_props), +}; + +static int battery_probe(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + int rc; + + battery_wm = wm; + + rc = power_supply_register(NULL, &battery_ps); + if (rc) + dev_err(&pdev->dev, + "Could not register mioa701 battery -> %d\n", rc); + return rc; +} + +static int battery_remove(struct platform_device *pdev) +{ + battery_wm = NULL; + return 0; +} + +static struct platform_driver mioa701_battery_driver = { + .driver = { + .name = "wm97xx-battery", + }, + .probe = battery_probe, + .remove = battery_remove +}; + +static int __init mioa701_battery_init(void) +{ + int rc; + + rc = platform_driver_register(&mioa701_battery_driver); + if (rc) + printk(KERN_ERR "Could not register mioa701 battery driver\n"); + return rc; +} + +#else +static int __init mioa701_battery_init(void) +{ + return 0; +} +#endif + +/* + * Mio global + */ + +/* Devices */ +#define MIO_PARENT_DEV(var, strname, tparent, pdata) \ +static struct platform_device var = { \ + .name = strname, \ + .id = -1, \ + .dev = { \ + .platform_data = pdata, \ + .parent = tparent, \ + }, \ +}; +#define MIO_SIMPLE_DEV(var, strname, pdata) \ + MIO_PARENT_DEV(var, strname, NULL, pdata) + +MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys", &mioa701_gpio_keys_data) +MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev, + &mioa701_backlight_data); +MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) +MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) +MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL) +MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL) +MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) +MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) + +static struct platform_device *devices[] __initdata = { + &mioa701_gpio_keys, + &mioa701_backlight, + &mioa701_led, + &pxa2xx_pcm, + &pxa2xx_ac97, + &mio_wm9713_codec, + &mioa701_sound, + &power_dev, + &strataflash, + &mioa701_board +}; + +static void mioa701_machine_exit(void); + +static void mioa701_poweroff(void) +{ + mioa701_machine_exit(); + gpio_set_value(GPIO18_POWEROFF, 1); +} + +static void mioa701_restart(char c) +{ + mioa701_machine_exit(); + arm_machine_restart(c); +} + +struct gpio_ress global_gpios[] = { + MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"), + MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"), + MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power") +}; + +static void __init mioa701_machine_init(void) +{ + PSLR = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */ + PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE; + RTTR = 32768 - 1; /* Reset crazy WinCE value */ + UP2OCR = UP2OCR_HXOE; + + pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config)); + mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); + bootstrap_init(); + set_pxa_fb_info(&mioa701_pxafb_info); + pxa_set_mci_info(&mioa701_mci_info); + pxa_set_keypad_info(&mioa701_keypad_info); + udc_init(); + pm_power_off = mioa701_poweroff; + arm_pm_restart = mioa701_restart; + platform_add_devices(devices, ARRAY_SIZE(devices)); + gsm_init(); + mioa701_battery_init(); +} + +static void mioa701_machine_exit(void) +{ + udc_exit(); + bootstrap_exit(); + gsm_exit(); +} + +MACHINE_START(MIOA701, "MIO A701") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = &pxa_map_io, + .init_irq = &pxa27x_init_irq, + .init_machine = mioa701_machine_init, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S new file mode 100644 index 00000000000..a647693d985 --- /dev/null +++ b/arch/arm/mach-pxa/mioa701_bootresume.S @@ -0,0 +1,36 @@ +/* Bootloader to resume MIO A701 + * + * 2007-1-12 Robert Jarzmik + * + * This code is licenced under the GPLv2. +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * Note: Yes, part of the following code is located into the .data section. + * This is to allow jumpaddr to be accessed with a relative load + * while we can't rely on any MMU translation. We could have put + * sleep_save_sp in the .text section as well, but some setups might + * insist on it to be truly read-only. + */ + .data +ENTRY(mioa701_bootstrap) +0: + b 1f +ENTRY(mioa701_jumpaddr) + .word 0x40f00008 @ PSPR in no-MMU mode +1: + mov r0, #0xa0000000 @ Don't suppose memory access works + orr r0, r0, #0x00200000 @ even if it's supposed to + mov r1, #0 + str r1, [r0] @ Early disable resume for next boot + ldr r0, mioa701_jumpaddr @ (Murphy's Law) + ldr r0, [r0] + mov pc, r0 +2: + +ENTRY(mioa701_bootstrap_lg) + .data + .word 2b-0b diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c new file mode 100644 index 00000000000..8a73814126b --- /dev/null +++ b/arch/arm/mach-pxa/mp900.c @@ -0,0 +1,100 @@ +/* + * linux/arch/arm/mach-pxa/mp900.c + * + * Support for the NEC MobilePro900/C platform + * + * Based on mach-pxa/gumstix.c + * + * 2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com> + * 2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/usb/isp116x.h> + +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include "generic.h" + +static void isp116x_pfm_delay(struct device *dev, int delay) +{ + + /* 400Mhz PXA2 = 2.5ns / instruction */ + + int cyc = delay / 10; + + /* 4 Instructions = 4 x 2.5ns = 10ns */ + __asm__ volatile ("0:\n" + "subs %0, %1, #1\n" + "bge 0b\n" + :"=r" (cyc) + :"0"(cyc) + ); +} + +static struct isp116x_platform_data isp116x_pfm_data = { + .remote_wakeup_enable = 1, + .delay = isp116x_pfm_delay, +}; + +static struct resource isp116x_pfm_resources[] = { + [0] = { + .start = 0x0d000000, + .end = 0x0d000000 + 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x0d000000 + 4, + .end = 0x0d000000 + 5, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 61, + .end = 61, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mp900c_dummy_device = { + .name = "mp900c_dummy", + .id = -1, +}; + +static struct platform_device mp900c_usb = { + .name = "isp116x-hcd", + .num_resources = ARRAY_SIZE(isp116x_pfm_resources), + .resource = isp116x_pfm_resources, + .dev.platform_data = &isp116x_pfm_data, +}; + +static struct platform_device *devices[] __initdata = { + &mp900c_dummy_device, + &mp900c_usb, +}; + +static void __init mp900c_init(void) +{ + printk(KERN_INFO "MobilePro 900/C machine init\n"); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */ +MACHINE_START(NEC_MP900, "MobilePro900/C") + .phys_io = 0x40000000, + .boot_params = 0xa0220100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .timer = &pxa_timer, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .init_machine = mp900c_init, +MACHINE_END + diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index fe924a23deb..4447711c9fc 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -25,6 +25,8 @@ #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> +#include <linux/wm97xx_batt.h> +#include <linux/power_supply.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -340,6 +342,23 @@ static struct platform_device power_supply = { }; /****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMTX_BAT_MAX_VOLTAGE, + .min_voltage = PALMTX_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** * Framebuffer ******************************************************************************/ static struct pxafb_mode_info palmtx_lcd_modes[] = { @@ -401,6 +420,7 @@ static void __init palmtx_init(void) pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmtx_ficp_platform_data); pxa_set_keypad_info(&palmtx_keypad_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c new file mode 100644 index 00000000000..2f730da3bba --- /dev/null +++ b/arch/arm/mach-pxa/palmz72.c @@ -0,0 +1,554 @@ +/* + * Hardware definitions for Palm Zire72 + * + * Authors: + * Vladimir "Farcaller" Pouzanov <farcaller@gmail.com> + * Sergey Lapin <slapin@ossfans.org> + * Alex Osborne <bobofdoom@gmail.com> + * Jan Herman <2hp@seznam.cz> + * + * Rewrite for mainline: + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> +#include <linux/power_supply.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/audio.h> +#include <mach/palmz72.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa27x.h> +#include <mach/irda.h> +#include <mach/pxa27x_keypad.h> +#include <mach/udc.h> +#include <mach/pm.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmz72_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO14_GPIO, /* SD detect */ + GPIO115_GPIO, /* SD RO */ + GPIO98_GPIO, /* SD power */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* IrDA */ + GPIO49_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* USB */ + GPIO15_GPIO, /* usb detect */ + GPIO12_GPIO, /* usb pullup */ + GPIO95_GPIO, /* usb power */ + + /* Matrix keypad */ + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + GPIO20_GPIO, /* bl power */ + GPIO21_GPIO, /* LCD border switch */ + GPIO22_GPIO, /* LCD border color */ + GPIO96_GPIO, /* lcd power */ + + /* Misc. */ + GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */ + GPIO88_GPIO, /* green led */ + GPIO27_GPIO, /* WM9712 IRQ */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmz72_mci_init(struct device *dev, + irq_handler_t palmz72_detect_int, void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), + palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + /* SD_POWER is not actually power, but it is more like chip + * select, i.e. it is inverted */ + + err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0); + if (err) + goto err4; + err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMZ72_SD_RO); +err4: + gpio_free(GPIO_NR_PALMZ72_SD_POWER_N); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N); +err: + return err; +} + +static void palmz72_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMZ72_SD_POWER_N); + free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data); + gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N); + gpio_free(GPIO_NR_PALMZ72_SD_RO); +} + +static void palmz72_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + if (p_d->ocr_mask & (1 << vdd)) + gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0); + else + gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1); +} + +static int palmz72_mci_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMZ72_SD_RO); +} + +static struct pxamci_platform_data palmz72_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmz72_mci_power, + .get_ro = palmz72_mci_ro, + .init = palmz72_mci_init, + .exit = palmz72_mci_exit, +}; + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +static unsigned int palmz72_matrix_keys[] = { + KEY(0, 0, KEY_POWER), + KEY(0, 1, KEY_F1), + KEY(0, 2, KEY_ENTER), + + KEY(1, 0, KEY_F2), + KEY(1, 1, KEY_F3), + KEY(1, 2, KEY_F4), + + KEY(2, 0, KEY_UP), + KEY(2, 2, KEY_DOWN), + + KEY(3, 0, KEY_RIGHT), + KEY(3, 2, KEY_LEFT), +}; + +static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = { + .matrix_key_rows = 4, + .matrix_key_cols = 3, + .matrix_key_map = palmz72_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(palmz72_matrix_keys), + + .debounce_interval = 30, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmz72_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMZ72_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMZ72_BL_POWER); +err: + return ret; +} + +static int palmz72_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness); + return brightness; +} + +static void palmz72_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMZ72_BL_POWER); + gpio_free(GPIO_NR_PALMZ72_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmz72_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMZ72_MAX_INTENSITY, + .dft_brightness = PALMZ72_MAX_INTENSITY, + .pwm_period_ns = PALMZ72_PERIOD_NS, + .init = palmz72_backlight_init, + .notify = palmz72_backlight_notify, + .exit = palmz72_backlight_exit, +}; + +static struct platform_device palmz72_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &palmz72_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmz72_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMZ72_IR_DISABLE); +err: + return err; +} + +static void palmz72_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMZ72_IR_DISABLE); +} + +static void palmz72_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmz72_ficp_platform_data = { + .startup = palmz72_irda_startup, + .shutdown = palmz72_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = palmz72_irda_transceiver_mode, +}; + +/****************************************************************************** + * LEDs + ******************************************************************************/ +static struct gpio_led gpio_leds[] = { + { + .name = "palmz72:green:led", + .default_trigger = "none", + .gpio = GPIO_NR_PALMZ72_LED_GREEN, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device palmz72_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + } +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT); + if (ret) + goto err2; + + ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB"); + if (ret) + goto err2; + ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N); +err2: + gpio_free(GPIO_NR_PALMZ72_POWER_DETECT); +err1: + return ret; +} + +static int palmz72_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT); +} + +static int palmz72_is_usb_online(void) +{ + return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N); + gpio_free(GPIO_NR_PALMZ72_POWER_DETECT); +} + +static char *palmz72_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmz72_is_ac_online, + .is_usb_online = palmz72_is_usb_online, + .exit = power_supply_exit, + .supplied_to = palmz72_supplicants, + .num_supplicants = ARRAY_SIZE(palmz72_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmz72_lcd_modes[] = { +{ + .pixclock = 115384, + .xres = 320, + .yres = 320, + .bpp = 16, + + .left_margin = 27, + .right_margin = 7, + .upper_margin = 7, + .lower_margin = 8, + + .hsync_len = 6, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmz72_lcd_screen = { + .modes = palmz72_lcd_modes, + .num_modes = ARRAY_SIZE(palmz72_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +#ifdef CONFIG_PM + +/* We have some black magic here + * PalmOS ROM on recover expects special struct physical address + * to be transferred via PSPR. Using this struct PalmOS restores + * its state after sleep. As for Linux, we need to setup it the + * same way. More than that, PalmOS ROM changes some values in memory. + * For now only one location is found, which needs special treatment. + * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people + * for reading backtraces for me :) + */ + +#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050) + +static struct palmz72_resume_info palmz72_resume_info = { + .magic0 = 0xb4e6, + .magic1 = 1, + + /* reset state, MMU off etc */ + .arm_control = 0, + .aux_control = 0, + .ttb = 0, + .domain_access = 0, + .process_id = 0, +}; + +static unsigned long store_ptr; + +/* sys_device for Palm Zire 72 PM */ + +static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg) +{ + /* setup the resume_info struct for the original bootloader */ + palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume; + + /* Storing memory touched by ROM */ + store_ptr = *PALMZ72_SAVE_DWORD; + + /* Setting PSPR to a proper value */ + PSPR = virt_to_phys(&palmz72_resume_info); + + return 0; +} + +static int palmz72_pm_resume(struct sys_device *dev) +{ + *PALMZ72_SAVE_DWORD = store_ptr; + return 0; +} + +static struct sysdev_class palmz72_pm_sysclass = { + .name = "palmz72_pm", + .suspend = palmz72_pm_suspend, + .resume = palmz72_pm_resume, +}; + +static struct sys_device palmz72_pm_device = { + .cls = &palmz72_pm_sysclass, +}; + +static int __init palmz72_pm_init(void) +{ + int ret = -ENODEV; + if (machine_is_palmz72()) { + ret = sysdev_class_register(&palmz72_pm_sysclass); + if (ret == 0) + ret = sysdev_register(&palmz72_pm_device); + } + return ret; +} + +device_initcall(palmz72_pm_init); +#endif + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { + &palmz72_backlight, + &palmz72_leds, + &power_supply, +}; + +static void __init palmz72_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config)); + set_pxa_fb_info(&palmz72_lcd_screen); + pxa_set_mci_info(&palmz72_mci_platform_data); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmz72_ficp_platform_data); + pxa_set_keypad_info(&palmz72_keypad_platform_data); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMZ72, "Palm Zire72") + .phys_io = 0x40000000, + .io_pg_offst = io_p2v(0x40000000), + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = palmz72_init +MACHINE_END diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 730b9f6ede1..36135a02fdc 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -31,7 +31,7 @@ #include <asm/mach/arch.h> #include <mach/hardware.h> #include <mach/pxa-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/mfp-pxa27x.h> #include <mach/pxa2xx-regs.h> #include <mach/pxa2xx_spi.h> #include <mach/pcm027.h> @@ -86,6 +86,28 @@ * *) CPU internal use only */ +static unsigned long pcm027_pin_config[] __initdata = { + /* Chip Selects */ + GPIO20_nSDCS_2, + GPIO21_nSDCS_3, + GPIO15_nCS_1, + GPIO78_nCS_2, + GPIO80_nCS_4, + GPIO33_nCS_5, /* Ethernet */ + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* GPIO */ + GPIO52_GPIO, /* IRQ from network controller */ +#ifdef CONFIG_LEDS_GPIO + GPIO90_GPIO, /* PCM027_LED_CPU */ + GPIO91_GPIO, /* PCM027_LED_HEART_BEAT */ +#endif + GPIO114_GPIO, /* IRQ from CAN controller */ +}; + /* * SMC91x network controller specific stuff */ @@ -206,13 +228,9 @@ static void __init pcm027_init(void) */ ARB_CNTRL = ARB_CORE_PARK | 0x234; - platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config)); - /* LEDs (on demand only) */ -#ifdef CONFIG_LEDS_GPIO - pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT); - pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT); -#endif /* CONFIG_LEDS_GPIO */ + platform_add_devices(devices, ARRAY_SIZE(devices)); /* at last call the baseboard to initialize itself */ #ifdef CONFIG_MACH_PCM990_BASEBOARD diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 420c9b3813f..f601425f1b1 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -262,8 +262,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc) GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO); if (likely(pending)) { irq = PCM027_IRQ(0) + __ffs(pending); - desc = irq_desc + irq; - desc_handle_irq(irq, desc); + generic_handle_irq(irq); } pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled; } while (pending); @@ -328,36 +327,10 @@ static struct pxamci_platform_data pcm990_mci_platform_data = { .exit = pcm990_mci_exit, }; -/* - * init OHCI hardware to work with - * - * Note: Only USB port 1 (host only) is connected - * - * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low - * GPIO89 (USBHPEN#1): power-on out, on when low - */ -static int pcm990_ohci_init(struct device *dev) -{ - /* - * disable USB port 2 and 3 - * power sense is active low - */ - UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 | - UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE); - /* - * wait 10ms after Power on - * overcurrent per port - * power switch per port - */ - UHCRHDA = (5<<24) | (1<<11) | (1<<8); /* FIXME: Required? */ - - return 0; -} - static struct pxaohci_platform_data pcm990_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, - .init = pcm990_ohci_init, - .exit = NULL, + .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW, + .power_on_delay = 10, }; /* diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 1b539e67557..164eb0bb632 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -86,9 +86,27 @@ static int pxa_pm_valid(suspend_state_t state) return -EINVAL; } +static int pxa_pm_prepare(void) +{ + int ret = 0; + + if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->prepare) + ret = pxa_cpu_pm_fns->prepare(); + + return ret; +} + +static void pxa_pm_finish(void) +{ + if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish) + pxa_cpu_pm_fns->finish(); +} + static struct platform_suspend_ops pxa_pm_ops = { .valid = pxa_pm_valid, .enter = pxa_pm_enter, + .prepare = pxa_pm_prepare, + .finish = pxa_pm_finish, }; static int __init pxa_pm_init(void) diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 3f5f484549b..2e3bd8b1523 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -20,6 +20,9 @@ #include <linux/fb.h> #include <linux/pm.h> #include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -33,7 +36,7 @@ #include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/mfp-pxa25x.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/i2c.h> @@ -42,6 +45,7 @@ #include <mach/pxafb.h> #include <mach/sharpsl.h> #include <mach/ssp.h> +#include <mach/pxa2xx_spi.h> #include <asm/hardware/scoop.h> #include <asm/hardware/locomo.h> @@ -51,6 +55,88 @@ #include "devices.h" #include "sharpsl.h" +static unsigned long poodle_pin_config[] __initdata = { + /* I/O */ + GPIO79_nCS_3, + GPIO80_nCS_4, + GPIO18_RDY, + + /* Clock */ + GPIO12_32KHz, + + /* SSP1 */ + GPIO23_SSP1_SCLK, + GPIO25_SSP1_TXD, + GPIO26_SSP1_RXD, + GPIO24_GPIO, /* POODLE_GPIO_TP_CS - SFRM as chip select */ + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + GPIO32_I2S_SYSCLK, + + /* Infra-Red */ + GPIO47_FICP_TXD, + GPIO46_FICP_RXD, + + /* FFUART */ + GPIO40_FFUART_DTR, + GPIO41_FFUART_RTS, + GPIO39_FFUART_TXD, + GPIO37_FFUART_DSR, + GPIO34_FFUART_RXD, + GPIO35_FFUART_CTS, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + + /* GPIO */ + GPIO9_GPIO, /* POODLE_GPIO_nSD_DETECT */ + GPIO7_GPIO, /* POODLE_GPIO_nSD_WP */ + GPIO3_GPIO, /* POODLE_GPIO_SD_PWR */ + GPIO33_GPIO, /* POODLE_GPIO_SD_PWR1 */ + + GPIO20_GPIO, /* POODLE_GPIO_USB_PULLUP */ + GPIO22_GPIO, /* POODLE_GPIO_IR_ON */ +}; + static struct resource poodle_scoop_resources[] = { [0] = { .start = 0x10800000, @@ -62,6 +148,7 @@ static struct resource poodle_scoop_resources[] = { static struct scoop_config poodle_scoop_setup = { .io_dir = POODLE_SCOOP_IO_DIR, .io_out = POODLE_SCOOP_IO_OUT, + .gpio_base = POODLE_SCOOP_GPIO_BASE, }; struct platform_device poodle_scoop_device = { @@ -74,27 +161,6 @@ struct platform_device poodle_scoop_device = { .resource = poodle_scoop_resources, }; -static void poodle_pcmcia_init(void) -{ - /* Setup default state of GPIO outputs - before we enable them as outputs. */ - GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | - GPIO_bit(GPIO53_nPCE_2); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); - pxa_gpio_mode(GPIO52_nPCE_1_MD); - pxa_gpio_mode(GPIO53_nPCE_2_MD); - pxa_gpio_mode(GPIO54_pSKTSEL_MD); -} - static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { { .dev = &poodle_scoop_device.dev, @@ -107,7 +173,6 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { static struct scoop_pcmcia_config poodle_pcmcia_config = { .devs = &poodle_pcmcia_scoop[0], .num_devs = 1, - .pcmcia_init = poodle_pcmcia_init, }; EXPORT_SYMBOL(poodle_scoop_device); @@ -136,62 +201,55 @@ struct platform_device poodle_locomo_device = { EXPORT_SYMBOL(poodle_locomo_device); -/* - * Poodle SSP Device - */ - -struct platform_device poodle_ssp_device = { - .name = "corgi-ssp", - .id = -1, -}; - -struct corgissp_machinfo poodle_ssp_machinfo = { - .port = 1, - .cs_lcdcon = -1, - .cs_ads7846 = -1, - .cs_max1111 = -1, - .clk_lcdcon = 2, - .clk_ads7846 = 36, - .clk_max1111 = 2, +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) +static struct pxa2xx_spi_master poodle_spi_info = { + .num_chipselect = 1, }; - -/* - * Poodle Touch Screen Device - */ -static struct resource poodlets_resources[] = { - [0] = { - .start = POODLE_IRQ_GPIO_TP_INT, - .end = POODLE_IRQ_GPIO_TP_INT, - .flags = IORESOURCE_IRQ, - }, +static struct ads7846_platform_data poodle_ads7846_info = { + .model = 7846, + .vref_delay_usecs = 100, + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .gpio_pendown = POODLE_GPIO_TP_INT, }; -static unsigned long poodle_get_hsync_invperiod(void) +static void ads7846_cs(u32 command) { - return 0; + gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT)); } -static void poodle_null_hsync(void) -{ -} - -static struct corgits_machinfo poodle_ts_machinfo = { - .get_hsync_invperiod = poodle_get_hsync_invperiod, - .put_hsync = poodle_null_hsync, - .wait_hsync = poodle_null_hsync, +static struct pxa2xx_spi_chip poodle_ads7846_chip = { + .cs_control = ads7846_cs, }; -static struct platform_device poodle_ts_device = { - .name = "corgi-ts", - .dev = { - .platform_data = &poodle_ts_machinfo, +static struct spi_board_info poodle_spi_devices[] = { + { + .modalias = "ads7846", + .max_speed_hz = 10000, + .bus_num = 1, + .platform_data = &poodle_ads7846_info, + .controller_data= &poodle_ads7846_chip, + .irq = gpio_to_irq(POODLE_GPIO_TP_INT), }, - .id = -1, - .num_resources = ARRAY_SIZE(poodlets_resources), - .resource = poodlets_resources, }; +static void __init poodle_init_spi(void) +{ + int err; + + err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS"); + if (err) + return; + + gpio_direction_output(POODLE_GPIO_TP_CS, 1); + + pxa2xx_set_spi_info(1, &poodle_spi_info); + spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices)); +} +#else +static inline void poodle_init_spi(void) {} +#endif /* * MMC/SD Device @@ -205,22 +263,50 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, { int err; - /* setup GPIO for PXA25x MMC controller */ - pxa_gpio_mode(GPIO6_MMCCLK_MD); - pxa_gpio_mode(GPIO8_MMCCS0_MD); - pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN); - pxa_gpio_mode(POODLE_GPIO_nSD_WP | GPIO_IN); - pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT); - pxa_gpio_mode(POODLE_GPIO_SD_PWR1 | GPIO_OUT); + err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT"); + if (err) + goto err_out; + + err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP"); + if (err) + goto err_free_1; + + err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR"); + if (err) + goto err_free_2; + + err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1"); + if (err) + goto err_free_3; + + gpio_direction_input(POODLE_GPIO_nSD_DETECT); + gpio_direction_input(POODLE_GPIO_nSD_WP); + + gpio_direction_output(POODLE_GPIO_SD_PWR, 0); + gpio_direction_output(POODLE_GPIO_SD_PWR1, 0); poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) - printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + if (err) { + pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n", + __func__); + goto err_free_4; + } + + return 0; +err_free_4: + gpio_free(POODLE_GPIO_SD_PWR1); +err_free_3: + gpio_free(POODLE_GPIO_SD_PWR); +err_free_2: + gpio_free(POODLE_GPIO_nSD_WP); +err_free_1: + gpio_free(POODLE_GPIO_nSD_DETECT); +err_out: return err; } @@ -228,18 +314,19 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - if (( 1 << vdd) & p_d->ocr_mask) { - GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR); + if ((1 << vdd) & p_d->ocr_mask) { + gpio_set_value(POODLE_GPIO_SD_PWR, 1); mdelay(2); - GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1); + gpio_set_value(POODLE_GPIO_SD_PWR1, 1); } else { - GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1); - GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR); + gpio_set_value(POODLE_GPIO_SD_PWR1, 0); + gpio_set_value(POODLE_GPIO_SD_PWR, 0); } } static int poodle_mci_get_ro(struct device *dev) { + return !!gpio_get_value(POODLE_GPIO_nSD_WP); return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP); } @@ -247,6 +334,10 @@ static int poodle_mci_get_ro(struct device *dev) static void poodle_mci_exit(struct device *dev, void *data) { free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data); + gpio_free(POODLE_GPIO_SD_PWR1); + gpio_free(POODLE_GPIO_SD_PWR); + gpio_free(POODLE_GPIO_nSD_WP); + gpio_free(POODLE_GPIO_nSD_DETECT); } static struct pxamci_platform_data poodle_mci_platform_data = { @@ -263,38 +354,41 @@ static struct pxamci_platform_data poodle_mci_platform_data = { */ static void poodle_irda_transceiver_mode(struct device *dev, int mode) { - if (mode & IR_OFF) { - GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON); - } else { - GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON); - } + gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF); pxa2xx_transceiver_mode(dev, mode); } +static int poodle_irda_startup(struct device *dev) +{ + int err; + + err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON"); + if (err) + return err; + + gpio_direction_output(POODLE_GPIO_IR_ON, 1); + return 0; +} + +static void poodle_irda_shutdown(struct device *dev) +{ + gpio_free(POODLE_GPIO_IR_ON); +} + static struct pxaficp_platform_data poodle_ficp_platform_data = { - .transceiver_cap = IR_SIRMODE | IR_OFF, - .transceiver_mode = poodle_irda_transceiver_mode, + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = poodle_irda_transceiver_mode, + .startup = poodle_irda_startup, + .shutdown = poodle_irda_shutdown, }; /* * USB Device Controller */ -static void poodle_udc_command(int cmd) -{ - switch(cmd) { - case PXA2XX_UDC_CMD_CONNECT: - GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP); - break; - case PXA2XX_UDC_CMD_DISCONNECT: - GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP); - break; - } -} - static struct pxa2xx_udc_mach_info udc_info __initdata = { /* no connect GPIO; poodle can't tell connection status */ - .udc_command = poodle_udc_command, + .gpio_pullup = POODLE_GPIO_USB_PULLUP, }; @@ -316,15 +410,12 @@ static struct pxafb_mode_info poodle_fb_mode = { static struct pxafb_mach_info poodle_fb_info = { .modes = &poodle_fb_mode, .num_modes = 1, - .lccr0 = LCCR0_Act | LCCR0_Sngl | LCCR0_Color, - .lccr3 = 0, + .lcd_conn = LCD_COLOR_TFT_16BPP, }; static struct platform_device *devices[] __initdata = { &poodle_locomo_device, &poodle_scoop_device, - &poodle_ssp_device, - &poodle_ts_device, }; static void poodle_poweroff(void) @@ -344,59 +435,23 @@ static void __init poodle_init(void) pm_power_off = poodle_poweroff; arm_pm_restart = poodle_restart; - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x00008000; - PGSR1 = 0x003F0202; - PGSR2 = 0x0001C000; PCFR |= PCFR_OPDE; - /* cpu initialize */ - /* Pgsr Register */ - PGSR0 = 0x0146dd80; - PGSR1 = 0x03bf0890; - PGSR2 = 0x0001c000; - - /* Alternate Register */ - GAFR0_L = 0x01001000; - GAFR0_U = 0x591a8010; - GAFR1_L = 0x900a8451; - GAFR1_U = 0xaaa5aaaa; - GAFR2_L = 0x8aaaaaaa; - GAFR2_U = 0x00000002; - - /* Direction Register */ - GPDR0 = 0xd3f0904c; - GPDR1 = 0xfcffb7d3; - GPDR2 = 0x0001ffff; - - /* Output Register */ - GPCR0 = 0x00000000; - GPCR1 = 0x00000000; - GPCR2 = 0x00000000; - - GPSR0 = 0x00400000; - GPSR1 = 0x00000000; - GPSR2 = 0x00000000; + pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config)); + + platform_scoop_config = &poodle_pcmcia_config; + + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (ret) + pr_warning("poodle: Unable to register LoCoMo device\n"); set_pxa_fb_parent(&poodle_locomo_device.dev); set_pxa_fb_info(&poodle_fb_info); - pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT); - pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); pxa_set_i2c_info(NULL); - - platform_scoop_config = &poodle_pcmcia_config; - - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); - if (ret) { - printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n"); - } - corgi_ssp_set_machinfo(&poodle_ssp_machinfo); + poodle_init_spi(); } static void __init fixup_poodle(struct machine_desc *desc, diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 305452b56e9..25d17a1dab7 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -36,6 +36,12 @@ #include "devices.h" #include "clock.h" +int cpu_is_pxa26x(void) +{ + return cpu_is_pxa250() && ((BOOT_DEF & 0x8) == 0); +} +EXPORT_SYMBOL_GPL(cpu_is_pxa26x); + /* * Various clock factors driven by the CCCR register. */ @@ -203,48 +209,21 @@ static struct clk pxa25x_clks[] = { * More ones like CP and general purpose register values are preserved * with the stack pointer in sleep.S. */ -enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, - - SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, - SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, - SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U, - +enum { SLEEP_SAVE_PSTR, - SLEEP_SAVE_CKEN, - SLEEP_SAVE_COUNT }; static void pxa25x_cpu_pm_save(unsigned long *sleep_save) { - SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); - - SAVE(GAFR0_L); SAVE(GAFR0_U); - SAVE(GAFR1_L); SAVE(GAFR1_U); - SAVE(GAFR2_L); SAVE(GAFR2_U); - SAVE(CKEN); SAVE(PSTR); - - /* Clear GPIO transition detect bits */ - GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2; } static void pxa25x_cpu_pm_restore(unsigned long *sleep_save) { - /* ensure not to come back here if it wasn't intended */ - PSPR = 0; - - /* restore registers */ - RESTORE(GAFR0_L); RESTORE(GAFR0_U); - RESTORE(GAFR1_L); RESTORE(GAFR1_U); - RESTORE(GAFR2_L); RESTORE(GAFR2_U); - RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); - - PSSR = PSSR_RDH | PSSR_PH; - RESTORE(CKEN); RESTORE(PSTR); } @@ -256,19 +235,32 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: - /* set resume return address */ - PSPR = virt_to_phys(pxa_cpu_resume); pxa25x_cpu_suspend(PWRMODE_SLEEP); break; } } +static int pxa25x_cpu_pm_prepare(void) +{ + /* set resume return address */ + PSPR = virt_to_phys(pxa_cpu_resume); + return 0; +} + +static void pxa25x_cpu_pm_finish(void) +{ + /* ensure not to come back here if it wasn't intended */ + PSPR = 0; +} + static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = { .save_count = SLEEP_SAVE_COUNT, .valid = suspend_valid_only_mem, .save = pxa25x_cpu_pm_save, .restore = pxa25x_cpu_pm_restore, .enter = pxa25x_cpu_pm_enter, + .prepare = pxa25x_cpu_pm_prepare, + .finish = pxa25x_cpu_pm_finish, }; static void __init pxa25x_init_pm(void) @@ -330,6 +322,8 @@ static struct sys_device pxa25x_sysdev[] = { { .cls = &pxa_irq_sysclass, }, { + .cls = &pxa2xx_mfp_sysclass, + }, { .cls = &pxa_gpio_sysclass, }, }; @@ -338,11 +332,7 @@ static int __init pxa25x_init(void) { int i, ret = 0; - /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ - if (cpu_is_pxa255()) - clks_register(&pxa25x_hwuart_clk, 1); - - if (cpu_is_pxa21x() || cpu_is_pxa25x()) { + if (cpu_is_pxa25x()) { reset_status = RCSR; @@ -365,9 +355,11 @@ static int __init pxa25x_init(void) return ret; } - /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ - if (cpu_is_pxa255()) + /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */ + if (cpu_is_pxa255() || cpu_is_pxa26x()) { + clks_register(&pxa25x_hwuart_clk, 1); ret = platform_device_register(&pxa_device_hwuart); + } return ret; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index f9f6a9c31f4..3e4ab2279c9 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -34,6 +34,13 @@ #include "devices.h" #include "clock.h" +void pxa27x_clear_otgph(void) +{ + if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH)) + PSSR |= PSSR_OTGPH; +} +EXPORT_SYMBOL(pxa27x_clear_otgph); + /* Crystal clock: 13MHz */ #define BASE_CLK 13000000 @@ -183,36 +190,18 @@ static struct clk pxa27x_clks[] = { * More ones like CP and general purpose register values are preserved * with the stack pointer in sleep.S. */ -enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3, - - SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, - SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, - SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U, - SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U, - +enum { SLEEP_SAVE_PSTR, - SLEEP_SAVE_CKEN, - SLEEP_SAVE_MDREFR, - SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, - SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, - + SLEEP_SAVE_PCFR, SLEEP_SAVE_COUNT }; void pxa27x_cpu_pm_save(unsigned long *sleep_save) { - SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3); - - SAVE(GAFR0_L); SAVE(GAFR0_U); - SAVE(GAFR1_L); SAVE(GAFR1_U); - SAVE(GAFR2_L); SAVE(GAFR2_U); - SAVE(GAFR3_L); SAVE(GAFR3_U); - SAVE(MDREFR); - SAVE(PWER); SAVE(PCFR); SAVE(PRER); - SAVE(PFER); SAVE(PKWR); + SAVE(PCFR); SAVE(CKEN); SAVE(PSTR); @@ -220,24 +209,12 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save) void pxa27x_cpu_pm_restore(unsigned long *sleep_save) { - /* ensure not to come back here if it wasn't intended */ - PSPR = 0; - - /* restore registers */ - RESTORE(GAFR0_L); RESTORE(GAFR0_U); - RESTORE(GAFR1_L); RESTORE(GAFR1_U); - RESTORE(GAFR2_L); RESTORE(GAFR2_U); - RESTORE(GAFR3_L); RESTORE(GAFR3_U); - RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3); - RESTORE(MDREFR); - RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); - RESTORE(PFER); RESTORE(PKWR); + RESTORE(PCFR); PSSR = PSSR_RDH | PSSR_PH; RESTORE(CKEN); - RESTORE(PSTR); } @@ -259,8 +236,6 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) pxa_cpu_standby(); break; case PM_SUSPEND_MEM: - /* set resume return address */ - PSPR = virt_to_phys(pxa_cpu_resume); pxa27x_cpu_suspend(PWRMODE_SLEEP); break; } @@ -271,12 +246,27 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state) return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; } +static int pxa27x_cpu_pm_prepare(void) +{ + /* set resume return address */ + PSPR = virt_to_phys(pxa_cpu_resume); + return 0; +} + +static void pxa27x_cpu_pm_finish(void) +{ + /* ensure not to come back here if it wasn't intended */ + PSPR = 0; +} + static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = { .save_count = SLEEP_SAVE_COUNT, .save = pxa27x_cpu_pm_save, .restore = pxa27x_cpu_pm_restore, .valid = pxa27x_cpu_pm_valid, .enter = pxa27x_cpu_pm_enter, + .prepare = pxa27x_cpu_pm_prepare, + .finish = pxa27x_cpu_pm_finish, }; static void __init pxa27x_init_pm(void) @@ -349,7 +339,7 @@ struct platform_device pxa27x_device_i2c_power = { .num_resources = ARRAY_SIZE(i2c_power_resources), }; -void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info) +void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) { local_irq_disable(); PCFR |= PCFR_PI2CEN; @@ -376,6 +366,8 @@ static struct sys_device pxa27x_sysdev[] = { { .cls = &pxa_irq_sysclass, }, { + .cls = &pxa2xx_mfp_sysclass, + }, { .cls = &pxa_gpio_sysclass, }, }; diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 03cbc38103e..b3cd5d0b0f3 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -203,6 +203,19 @@ static const struct clkops clk_pout_ops = { .disable = clk_pout_disable, }; +static void clk_dummy_enable(struct clk *clk) +{ +} + +static void clk_dummy_disable(struct clk *clk) +{ +} + +static const struct clkops clk_dummy_ops = { + .enable = clk_dummy_enable, + .disable = clk_dummy_disable, +}; + static struct clk pxa3xx_clks[] = { { .name = "CLK_POUT", @@ -211,6 +224,13 @@ static struct clk pxa3xx_clks[] = { .delay = 70, }, + /* Power I2C clock is always on */ + { + .name = "I2CCLK", + .ops = &clk_dummy_ops, + .dev = &pxa3xx_device_i2c_power.dev, + }, + PXA3xx_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), PXA3xx_CK("AC97CLK", AC97, &clk_pxa3xx_ac97_ops, NULL), @@ -509,6 +529,30 @@ void __init pxa3xx_init_irq(void) * device registration specific to PXA3xx. */ +static struct resource i2c_power_resources[] = { + { + .start = 0x40f500c0, + .end = 0x40f500d3, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PWRI2C, + .end = IRQ_PWRI2C, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa3xx_device_i2c_power = { + .name = "pxa2xx-i2c", + .id = 1, + .resource = i2c_power_resources, + .num_resources = ARRAY_SIZE(i2c_power_resources), +}; + +void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) +{ + pxa3xx_device_i2c_power.dev.platform_data = info; +} + static struct platform_device *devices[] __initdata = { /* &pxa_device_udc, The UDC driver is PXA25x only */ &pxa_device_ffuart, @@ -522,6 +566,7 @@ static struct platform_device *devices[] __initdata = { &pxa3xx_device_ssp4, &pxa27x_device_pwm0, &pxa27x_device_pwm1, + &pxa3xx_device_i2c_power, }; static struct sys_device pxa3xx_sysdev[] = { diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 9996c612c3d..1b2af575c40 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -7,7 +7,7 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/gpio.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/proc-fns.h> #include <mach/pxa-regs.h> @@ -20,7 +20,7 @@ static void do_hw_reset(void); static int reset_gpio = -1; -int init_gpio_reset(int gpio) +int init_gpio_reset(int gpio, int output) { int rc; @@ -30,9 +30,12 @@ int init_gpio_reset(int gpio) goto out; } - rc = gpio_direction_input(gpio); + if (output) + rc = gpio_direction_output(gpio, 0); + else + rc = gpio_direction_input(gpio); if (rc) { - printk(KERN_ERR "Can't configure reset_gpio for input\n"); + printk(KERN_ERR "Can't configure reset_gpio\n"); gpio_free(gpio); goto out; } diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index e804ae09370..15c2f1a8623 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -116,24 +116,20 @@ struct battery_thresh spitz_battery_levels_noac[] = { { 0, 0}, }; -/* MAX1111 Commands */ -#define MAXCTRL_PD0 1u << 0 -#define MAXCTRL_PD1 1u << 1 -#define MAXCTRL_SGL 1u << 2 -#define MAXCTRL_UNI 1u << 3 -#define MAXCTRL_SEL_SH 4 -#define MAXCTRL_STR 1u << 7 - /* * Read MAX1111 ADC */ +extern int max1111_read_channel(int); + int sharpsl_pm_pxa_read_max1111(int channel) { if (machine_is_tosa()) // Ugly, better move this function into another module return 0; - return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 - | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); + /* max1111 accepts channels from 0-3, however, + * it is encoded from 0-7 here in the code. + */ + return max1111_read_channel(channel >> 1); } void sharpsl_pm_pxa_init(void) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index b569f3b4cf3..524f656dc56 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -19,16 +19,23 @@ #include <linux/major.h> #include <linux/fs.h> #include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/leds.h> #include <linux/mmc/host.h> #include <linux/pm.h> #include <linux/backlight.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/i2c/pca953x.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/spi/corgi_lcd.h> #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/io.h> #include <asm/system.h> #include <asm/mach/arch.h> @@ -37,7 +44,7 @@ #include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/mfp-pxa27x.h> #include <mach/pxa27x-udc.h> #include <mach/reset.h> #include <mach/i2c.h> @@ -46,7 +53,7 @@ #include <mach/ohci.h> #include <mach/udc.h> #include <mach/pxafb.h> -#include <mach/akita.h> +#include <mach/pxa2xx_spi.h> #include <mach/spitz.h> #include <mach/sharpsl.h> @@ -57,6 +64,66 @@ #include "devices.h" #include "sharpsl.h" +static unsigned long spitz_pin_config[] __initdata = { + /* Chip Selects */ + GPIO78_nCS_2, /* SCOOP #2 */ + GPIO80_nCS_4, /* SCOOP #1 */ + + /* LCD - 16bpp Active TFT */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + + /* GPIOs */ + GPIO9_GPIO, /* SPITZ_GPIO_nSD_DETECT */ + GPIO81_GPIO, /* SPITZ_GPIO_nSD_WP */ + GPIO41_GPIO, /* SPITZ_GPIO_USB_CONNECT */ + GPIO37_GPIO, /* SPITZ_GPIO_USB_HOST */ + GPIO35_GPIO, /* SPITZ_GPIO_USB_DEVICE */ + GPIO22_GPIO, /* SPITZ_GPIO_HSYNC */ + GPIO94_GPIO, /* SPITZ_GPIO_CF_CD */ + GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */ + GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */ + + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, +}; + /* * Spitz SCOOP Device #1 */ @@ -69,10 +136,11 @@ static struct resource spitz_scoop_resources[] = { }; static struct scoop_config spitz_scoop_setup = { - .io_dir = SPITZ_SCP_IO_DIR, + .io_dir = SPITZ_SCP_IO_DIR, .io_out = SPITZ_SCP_IO_OUT, - .suspend_clr = SPITZ_SCP_SUS_CLR, - .suspend_set = SPITZ_SCP_SUS_SET, + .suspend_clr = SPITZ_SCP_SUS_CLR, + .suspend_set = SPITZ_SCP_SUS_SET, + .gpio_base = SPITZ_SCP_GPIO_BASE, }; struct platform_device spitzscoop_device = { @@ -97,10 +165,11 @@ static struct resource spitz_scoop2_resources[] = { }; static struct scoop_config spitz_scoop2_setup = { - .io_dir = SPITZ_SCP2_IO_DIR, + .io_dir = SPITZ_SCP2_IO_DIR, .io_out = SPITZ_SCP2_IO_OUT, - .suspend_clr = SPITZ_SCP2_SUS_CLR, - .suspend_set = SPITZ_SCP2_SUS_SET, + .suspend_clr = SPITZ_SCP2_SUS_CLR, + .suspend_set = SPITZ_SCP2_SUS_SET, + .gpio_base = SPITZ_SCP2_GPIO_BASE, }; struct platform_device spitzscoop2_device = { @@ -122,7 +191,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); if (new_cpr & 0x0007) { - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + gpio_set_value(SPITZ_GPIO_CF_POWER, 1); if (!(cpr & 0x0002) && !(cpr & 0x0004)) mdelay(5); if (device == SPITZ_PWR_CF) @@ -138,34 +207,13 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) if (!(cpr & 0x0002) && !(cpr & 0x0004)) { write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000); mdelay(1); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + gpio_set_value(SPITZ_GPIO_CF_POWER, 0); } else { write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); } } } -static void spitz_pcmcia_init(void) -{ - /* Setup default state of GPIO outputs - before we enable them as outputs. */ - GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2); - GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); - pxa_gpio_mode(GPIO85_nPCE_1_MD); - pxa_gpio_mode(GPIO54_nPCE_2_MD); - pxa_gpio_mode(GPIO104_pSKTSEL_MD); -} - static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) { /* Only need to override behaviour for slot 0 */ @@ -191,165 +239,169 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { static struct scoop_pcmcia_config spitz_pcmcia_config = { .devs = &spitz_pcmcia_scoop[0], .num_devs = 2, - .pcmcia_init = spitz_pcmcia_init, .power_ctrl = spitz_pcmcia_pwr, }; EXPORT_SYMBOL(spitzscoop_device); EXPORT_SYMBOL(spitzscoop2_device); - /* - * Spitz SSP Device - * - * Set the parent as the scoop device because a lot of SSP devices - * also use scoop functions and this makes the power up/down order - * work correctly. + * Spitz Keyboard Device */ -struct platform_device spitzssp_device = { - .name = "corgi-ssp", - .dev = { - .parent = &spitzscoop_device.dev, - }, +static struct platform_device spitzkbd_device = { + .name = "spitz-keyboard", .id = -1, }; -struct corgissp_machinfo spitz_ssp_machinfo = { - .port = 2, - .cs_lcdcon = SPITZ_GPIO_LCDCON_CS, - .cs_ads7846 = SPITZ_GPIO_ADS7846_CS, - .cs_max1111 = SPITZ_GPIO_MAX1111_CS, - .clk_lcdcon = 520, - .clk_ads7846 = 14, - .clk_max1111 = 56, -}; - /* - * Spitz Backlight Device + * Spitz LEDs */ -static void spitz_bl_kick_battery(void) -{ - void (*kick_batt)(void); - - kick_batt = symbol_get(sharpsl_battery_kick); - if (kick_batt) { - kick_batt(); - symbol_put(sharpsl_battery_kick); - } -} - -static struct generic_bl_info spitz_bl_machinfo = { - .name = "corgi-bl", - .default_intensity = 0x1f, - .limit_mask = 0x0b, - .max_intensity = 0x2f, - .kick_battery = spitz_bl_kick_battery, -}; - -static struct platform_device spitzbl_device = { - .name = "generic-bl", - .dev = { - .platform_data = &spitz_bl_machinfo, +static struct gpio_led spitz_gpio_leds[] = { + { + .name = "spitz:amber:charge", + .default_trigger = "sharpsl-charge", + .gpio = SPITZ_GPIO_LED_ORANGE, + }, + { + .name = "spitz:green:hddactivity", + .default_trigger = "ide-disk", + .gpio = SPITZ_GPIO_LED_GREEN, }, - .id = -1, }; - -/* - * Spitz Keyboard Device - */ -static struct platform_device spitzkbd_device = { - .name = "spitz-keyboard", - .id = -1, +static struct gpio_led_platform_data spitz_gpio_leds_info = { + .leds = spitz_gpio_leds, + .num_leds = ARRAY_SIZE(spitz_gpio_leds), }; - -/* - * Spitz LEDs - */ static struct platform_device spitzled_device = { - .name = "spitz-led", + .name = "leds-gpio", .id = -1, + .dev = { + .platform_data = &spitz_gpio_leds_info, + }, }; -/* - * Spitz Touch Screen Device - */ +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) +static struct pxa2xx_spi_master spitz_spi_info = { + .num_chipselect = 3, +}; -static unsigned long (*get_hsync_invperiod)(struct device *dev); +static struct ads7846_platform_data spitz_ads7846_info = { + .model = 7846, + .vref_delay_usecs = 100, + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .gpio_pendown = SPITZ_GPIO_TP_INT, +}; -static void inline sharpsl_wait_sync(int gpio) +static void spitz_ads7846_cs(u32 command) { - while((GPLR(gpio) & GPIO_bit(gpio)) == 0); - while((GPLR(gpio) & GPIO_bit(gpio)) != 0); + gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT)); } -static struct device *spitz_pxafb_dev; +static struct pxa2xx_spi_chip spitz_ads7846_chip = { + .cs_control = spitz_ads7846_cs, +}; -static int is_pxafb_device(struct device * dev, void * data) +static void spitz_bl_kick_battery(void) { - struct platform_device *pdev = container_of(dev, struct platform_device, dev); - - return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0); -} + void (*kick_batt)(void); -static unsigned long spitz_get_hsync_invperiod(void) -{ -#ifdef CONFIG_FB_PXA - if (!spitz_pxafb_dev) { - spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); - if (!spitz_pxafb_dev) - return 0; + kick_batt = symbol_get(sharpsl_battery_kick); + if (kick_batt) { + kick_batt(); + symbol_put(sharpsl_battery_kick); } - if (!get_hsync_invperiod) - get_hsync_invperiod = symbol_get(pxafb_get_hsync_time); - if (!get_hsync_invperiod) -#endif - return 0; - - return get_hsync_invperiod(spitz_pxafb_dev); } -static void spitz_put_hsync(void) -{ - put_device(spitz_pxafb_dev); - if (get_hsync_invperiod) - symbol_put(pxafb_get_hsync_time); - spitz_pxafb_dev = NULL; - get_hsync_invperiod = NULL; -} +static struct corgi_lcd_platform_data spitz_lcdcon_info = { + .init_mode = CORGI_LCD_MODE_VGA, + .max_intensity = 0x2f, + .default_intensity = 0x1f, + .limit_mask = 0x0b, + .gpio_backlight_cont = SPITZ_GPIO_BACKLIGHT_CONT, + .gpio_backlight_on = SPITZ_GPIO_BACKLIGHT_ON, + .kick_battery = spitz_bl_kick_battery, +}; -static void spitz_wait_hsync(void) +static void spitz_lcdcon_cs(u32 command) { - sharpsl_wait_sync(SPITZ_GPIO_HSYNC); + gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT)); } -static struct resource spitzts_resources[] = { - [0] = { - .start = SPITZ_IRQ_GPIO_TP_INT, - .end = SPITZ_IRQ_GPIO_TP_INT, - .flags = IORESOURCE_IRQ, - }, +static struct pxa2xx_spi_chip spitz_lcdcon_chip = { + .cs_control = spitz_lcdcon_cs, }; -static struct corgits_machinfo spitz_ts_machinfo = { - .get_hsync_invperiod = spitz_get_hsync_invperiod, - .put_hsync = spitz_put_hsync, - .wait_hsync = spitz_wait_hsync, +static void spitz_max1111_cs(u32 command) +{ + gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT)); +} + +static struct pxa2xx_spi_chip spitz_max1111_chip = { + .cs_control = spitz_max1111_cs, }; -static struct platform_device spitzts_device = { - .name = "corgi-ts", - .dev = { - .parent = &spitzssp_device.dev, - .platform_data = &spitz_ts_machinfo, +static struct spi_board_info spitz_spi_devices[] = { + { + .modalias = "ads7846", + .max_speed_hz = 1200000, + .bus_num = 2, + .chip_select = 0, + .platform_data = &spitz_ads7846_info, + .controller_data= &spitz_ads7846_chip, + .irq = gpio_to_irq(SPITZ_GPIO_TP_INT), + }, { + .modalias = "corgi-lcd", + .max_speed_hz = 50000, + .bus_num = 2, + .chip_select = 1, + .platform_data = &spitz_lcdcon_info, + .controller_data= &spitz_lcdcon_chip, + }, { + .modalias = "max1111", + .max_speed_hz = 450000, + .bus_num = 2, + .chip_select = 2, + .controller_data= &spitz_max1111_chip, }, - .id = -1, - .num_resources = ARRAY_SIZE(spitzts_resources), - .resource = spitzts_resources, }; +static void __init spitz_init_spi(void) +{ + int err; + + err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS"); + if (err) + return; + + err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS"); + if (err) + goto err_free_1; + + err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS"); + if (err) + goto err_free_2; + + if (machine_is_akita()) { + spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT; + spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON; + } + + pxa2xx_set_spi_info(2, &spitz_spi_info); + spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); + return; + +err_free_2: + gpio_free(SPITZ_GPIO_LCDCON_CS); +err_free_1: + gpio_free(SPITZ_GPIO_ADS7846_CS); +} +#else +static inline void spitz_init_spi(void) {} +#endif /* * MMC/SD Device @@ -364,24 +416,35 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo { int err; - /* setup GPIO for PXA27x MMC controller */ - pxa_gpio_mode(GPIO32_MMCCLK_MD); - pxa_gpio_mode(GPIO112_MMCCMD_MD); - pxa_gpio_mode(GPIO92_MMCDAT0_MD); - pxa_gpio_mode(GPIO109_MMCDAT1_MD); - pxa_gpio_mode(GPIO110_MMCDAT2_MD); - pxa_gpio_mode(GPIO111_MMCDAT3_MD); - pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN); + err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT"); + if (err) + goto err_out; + + err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP"); + if (err) + goto err_free_1; + + gpio_direction_input(SPITZ_GPIO_nSD_DETECT); + gpio_direction_input(SPITZ_GPIO_nSD_WP); spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) - printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + if (err) { + pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n", + __func__); + goto err_free_2; + } + return 0; +err_free_2: + gpio_free(SPITZ_GPIO_nSD_WP); +err_free_1: + gpio_free(SPITZ_GPIO_nSD_DETECT); +err_out: return err; } @@ -397,12 +460,14 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) static int spitz_mci_get_ro(struct device *dev) { - return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP); + return gpio_get_value(SPITZ_GPIO_nSD_WP); } static void spitz_mci_exit(struct device *dev, void *data) { free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data); + gpio_free(SPITZ_GPIO_nSD_WP); + gpio_free(SPITZ_GPIO_nSD_DETECT); } static struct pxamci_platform_data spitz_mci_platform_data = { @@ -419,27 +484,24 @@ static struct pxamci_platform_data spitz_mci_platform_data = { */ static int spitz_ohci_init(struct device *dev) { - /* Only Port 2 is connected */ - pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT); - pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN); - - /* Setup USB Port 2 Output Control Register */ - UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; - - GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST); + int err; - UHCHR = (UHCHR) & - ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST"); + if (err) + return err; - UHCRHDA |= UHCRHDA_NOCP; + /* Only Port 2 is connected + * Setup USB Port 2 Output Control Register + */ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; - return 0; + return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1); } static struct pxaohci_platform_data spitz_ohci_platform_data = { .port_mode = PMM_NPS_MODE, .init = spitz_ohci_init, + .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION, .power_budget = 150, }; @@ -447,29 +509,50 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = { /* * Irda */ +static int spitz_irda_startup(struct device *dev) +{ + int rc; + + rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on"); + if (rc) + goto err; + + rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1); + if (rc) + goto err_dir; + + return 0; + +err_dir: + gpio_free(SPITZ_GPIO_IR_ON); +err: + return rc; +} + +static void spitz_irda_shutdown(struct device *dev) +{ + gpio_free(SPITZ_GPIO_IR_ON); +} + static void spitz_irda_transceiver_mode(struct device *dev, int mode) { - if (mode & IR_OFF) - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON); - else - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON); + gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF); pxa2xx_transceiver_mode(dev, mode); } #ifdef CONFIG_MACH_AKITA static void akita_irda_transceiver_mode(struct device *dev, int mode) { - if (mode & IR_OFF) - akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); - else - akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); + gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF); pxa2xx_transceiver_mode(dev, mode); } #endif static struct pxaficp_platform_data spitz_ficp_platform_data = { - .transceiver_cap = IR_SIRMODE | IR_OFF, - .transceiver_mode = spitz_irda_transceiver_mode, + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = spitz_irda_transceiver_mode, + .startup = spitz_irda_startup, + .shutdown = spitz_irda_shutdown, }; @@ -477,14 +560,6 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = { * Spitz PXA Framebuffer */ -static void spitz_lcd_power(int on, struct fb_var_screeninfo *var) -{ - if (on) - corgi_lcdtg_hw_init(var->xres); - else - corgi_lcdtg_suspend(); -} - static struct pxafb_mode_info spitz_pxafb_modes[] = { { .pixclock = 19231, @@ -517,18 +592,13 @@ static struct pxafb_mach_info spitz_pxafb_info = { .modes = &spitz_pxafb_modes[0], .num_modes = 2, .fixed_modes = 1, - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM, - .lccr3 = LCCR3_PixRsEdg | LCCR3_OutEnH, - .pxafb_lcd_power = spitz_lcd_power, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING, }; static struct platform_device *devices[] __initdata = { &spitzscoop_device, - &spitzssp_device, &spitzkbd_device, - &spitzts_device, - &spitzbl_device, &spitzled_device, }; @@ -548,63 +618,32 @@ static void spitz_restart(char mode) static void __init common_init(void) { - init_gpio_reset(SPITZ_GPIO_ON_RESET); + init_gpio_reset(SPITZ_GPIO_ON_RESET, 1); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; PMCR = 0x00; - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x0158C000; - PGSR1 = 0x00FF0080; - PGSR2 = 0x0001C004; - /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ PCFR |= PCFR_OPDE; - corgi_ssp_set_machinfo(&spitz_ssp_machinfo); + pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config)); - pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN); + spitz_init_spi(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_mci_info(&spitz_mci_platform_data); pxa_set_ohci_info(&spitz_ohci_platform_data); pxa_set_ficp_info(&spitz_ficp_platform_data); - set_pxa_fb_parent(&spitzssp_device.dev); set_pxa_fb_info(&spitz_pxafb_info); pxa_set_i2c_info(NULL); } #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) -static void spitz_bl_set_intensity(int intensity) -{ - if (intensity > 0x10) - intensity += 0x10; - - /* Bits 0-4 are accessed via the SSP interface */ - corgi_ssp_blduty_set(intensity & 0x1f); - - /* Bit 5 is via SCOOP */ - if (intensity & 0x0020) - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); - else - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); - - if (intensity) - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); - else - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); -} - static void __init spitz_init(void) { platform_scoop_config = &spitz_pcmcia_config; - spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity; - common_init(); platform_device_register(&spitzscoop2_device); @@ -615,32 +654,17 @@ static void __init spitz_init(void) /* * Akita IO Expander */ -struct platform_device akitaioexp_device = { - .name = "akita-ioexp", - .id = -1, +static struct pca953x_platform_data akita_ioexp = { + .gpio_base = AKITA_IOEXP_GPIO_BASE, }; -EXPORT_SYMBOL_GPL(akitaioexp_device); - -static void akita_bl_set_intensity(int intensity) -{ - if (intensity > 0x10) - intensity += 0x10; - - /* Bits 0-4 are accessed via the SSP interface */ - corgi_ssp_blduty_set(intensity & 0x1f); - - /* Bit 5 is via IO-Expander */ - if (intensity & 0x0020) - akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); - else - akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); - - if (intensity) - akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); - else - akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); -} +static struct i2c_board_info akita_i2c_board_info[] = { + { + .type = "max7310", + .addr = 0x18, + .platform_data = &akita_ioexp, + }, +}; static void __init akita_init(void) { @@ -649,11 +673,10 @@ static void __init akita_init(void) /* We just pretend the second element of the array doesn't exist */ spitz_pcmcia_config.num_devs = 1; platform_scoop_config = &spitz_pcmcia_config; - spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity; - platform_device_register(&akitaioexp_device); + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info)); - spitzscoop_device.dev.parent = &akitaioexp_device.dev; common_init(); } #endif diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 8a40505dfd2..53018db106a 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -21,7 +21,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> #include <mach/hardware.h> -#include <asm/hardware/scoop.h> #include <mach/sharpsl.h> #include <mach/spitz.h> @@ -48,44 +47,35 @@ static void spitz_charger_init(void) static void spitz_measure_temp(int on) { - if (on) - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON); - else - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON); + gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on); } static void spitz_charge(int on) { if (on) { if (sharpsl_pm.flags & SHARPSL_SUSPENDED) { - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + gpio_set_value(SPITZ_GPIO_JK_B, 1); + gpio_set_value(SPITZ_GPIO_CHRG_ON, 0); } else { - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + gpio_set_value(SPITZ_GPIO_JK_B, 0); + gpio_set_value(SPITZ_GPIO_CHRG_ON, 0); } } else { - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + gpio_set_value(SPITZ_GPIO_JK_B, 0); + gpio_set_value(SPITZ_GPIO_CHRG_ON, 1); } } static void spitz_discharge(int on) { - if (on) - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A); - else - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A); + gpio_set_value(SPITZ_GPIO_JK_A, on); } /* HACK - For unknown reasons, accurate voltage readings are only made with a load on the power bus which the green led on spitz provides */ static void spitz_discharge1(int on) { - if (on) - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); - else - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); + gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } static void spitz_presuspend(void) diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 9bd93c5f28b..2c31ec72568 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -28,8 +28,8 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/platform_device.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/irq.h> #include <mach/hardware.h> #include <mach/ssp.h> diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index b0d6b32654c..f8a9a62959e 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -155,7 +155,7 @@ static void __init pxa_timer_init(void) OIER = 0; OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - if (cpu_is_pxa21x() || cpu_is_pxa25x()) + if (cpu_is_pxa25x()) clock_tick_rate = 3686400; else if (machine_is_mainstone()) clock_tick_rate = 3249600; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 9f3ef9eb32e..130e37e4ebd 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -781,7 +781,7 @@ static void __init tosa_init(void) gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ - init_gpio_reset(TOSA_GPIO_ON_RESET); + init_gpio_reset(TOSA_GPIO_ON_RESET, 0); pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 3ed757e6bcc..a13dbf3c2c0 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -22,8 +22,8 @@ #include <linux/fb.h> #include <linux/ioport.h> #include <linux/delay.h> -#include <linux/serial_8250.h> -#include <linux/mtd/mtd.h> +#include <linux/gpio.h> +#include <linux/dm9000.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> @@ -31,7 +31,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/sizes.h> @@ -40,41 +39,148 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> +#include <mach/hardware.h> #include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/mfp-pxa27x.h> +#include <mach/pxa2xx_spi.h> #include <mach/trizeps4.h> #include <mach/audio.h> #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> +#include <mach/i2c.h> #include "generic.h" #include "devices.h" -/******************************************************************************************** +/* comment out the following line if you want to use the + * Standard UART from PXA for serial / irda transmission + * and acivate it if you have status leds connected */ +#define STATUS_LEDS_ON_STUART_PINS 1 + +/***************************************************************************** + * MultiFunctionPins of CPU + *****************************************************************************/ +static unsigned long trizeps4_pin_config[] __initdata = { + /* Chip Selects */ + GPIO15_nCS_1, /* DiskOnChip CS */ + GPIO93_GPIO, /* TRIZEPS4_DOC_IRQ */ + GPIO94_GPIO, /* DOC lock */ + + GPIO78_nCS_2, /* DM9000 CS */ + GPIO101_GPIO, /* TRIZEPS4_ETH_IRQ */ + + GPIO79_nCS_3, /* Logic CS */ + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* Logic irq */ + + /* LCD - 16bpp Active TFT */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* UART */ + GPIO9_FFUART_CTS, + GPIO10_FFUART_DCD, + GPIO16_FFUART_TXD, + GPIO33_FFUART_DSR, + GPIO38_FFUART_RI, + GPIO82_FFUART_DTR, + GPIO83_FFUART_RTS, + GPIO96_FFUART_RXD, + + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, +#ifdef STATUS_LEDS_ON_STUART_PINS + GPIO46_GPIO, + GPIO47_GPIO, +#else + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, +#endif + /* PCMCIA */ + GPIO11_GPIO, /* TRIZEPS4_CD_IRQ */ + GPIO13_GPIO, /* TRIZEPS4_READY_NINT */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO54_nPCE_2, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO102_nPCE_1, + GPIO104_PSKTSEL, + + /* MultiMediaCard */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO12_GPIO, /* TRIZEPS4_MMC_IRQ */ + + /* USB OHCI */ + GPIO88_USBH1_PWR, /* USBHPWR1 */ + GPIO89_USBH1_PEN, /* USBHPEN1 */ + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, +}; + +static unsigned long trizeps4wl_pin_config[] __initdata = { + /* SSP 2 */ + GPIO14_SSP2_SFRM, + GPIO19_SSP2_SCLK, + GPIO53_GPIO, /* TRIZEPS4_SPI_IRQ */ + GPIO86_SSP2_RXD, + GPIO87_SSP2_TXD, +}; + +/**************************************************************************** * ONBOARD FLASH - ********************************************************************************************/ + ****************************************************************************/ static struct mtd_partition trizeps4_partitions[] = { { .name = "Bootloader", .offset = 0x00000000, .size = 0x00040000, .mask_flags = MTD_WRITEABLE /* force read-only */ - },{ + }, { .name = "Backup", .offset = 0x00040000, .size = 0x00040000, - },{ + }, { .name = "Image", .offset = 0x00080000, .size = 0x01080000, - },{ + }, { .name = "IPSM", .offset = 0x01100000, .size = 0x00e00000, - },{ + }, { .name = "Registry", .offset = 0x01f00000, .size = MTDPART_SIZ_FULL, @@ -105,9 +211,9 @@ static struct platform_device flash_device = { .num_resources = 1, }; -/******************************************************************************************** +/**************************************************************************** * DAVICOM DM9000 Ethernet - ********************************************************************************************/ + ****************************************************************************/ static struct resource dm9000_resources[] = { [0] = { .start = TRIZEPS4_ETH_PHYS+0x300, @@ -122,67 +228,68 @@ static struct resource dm9000_resources[] = { [2] = { .start = TRIZEPS4_ETH_IRQ, .end = TRIZEPS4_ETH_IRQ, - .flags = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; +static struct dm9000_plat_data tri_dm9000_platdata = { + .flags = DM9000_PLATF_32BITONLY, +}; + static struct platform_device dm9000_device = { .name = "dm9000", .id = -1, .num_resources = ARRAY_SIZE(dm9000_resources), .resource = dm9000_resources, + .dev = { + .platform_data = &tri_dm9000_platdata, + } }; -/******************************************************************************************** - * PXA270 serial ports - ********************************************************************************************/ -static struct plat_serial8250_port tri_serial_ports[] = { -#ifdef CONFIG_SERIAL_PXA - /* this uses the own PXA driver */ +/**************************************************************************** + * LED's on GPIO pins of PXA + ****************************************************************************/ +static struct gpio_led trizeps4_led[] = { +#ifdef STATUS_LEDS_ON_STUART_PINS { - 0, - }, -#else - /* this uses the generic 8520 driver */ - [0] = { - .membase = (void *)&FFUART, - .irq = IRQ_FFUART, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM32, - .regshift = 2, - .uartclk = (921600*16), - }, - [1] = { - .membase = (void *)&BTUART, - .irq = IRQ_BTUART, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM32, - .regshift = 2, - .uartclk = (921600*16), + .name = "led0:orange:heartbeat", /* */ + .default_trigger = "heartbeat", + .gpio = GPIO_HEARTBEAT_LED, + .active_low = 1, }, { - 0, + .name = "led1:yellow:cpubusy", /* */ + .default_trigger = "cpu-busy", + .gpio = GPIO_SYS_BUSY_LED, + .active_low = 1, }, #endif }; -static struct platform_device uart_devices = { - .name = "serial8250", - .id = 0, +static struct gpio_led_platform_data trizeps4_led_data = { + .leds = trizeps4_led, + .num_leds = ARRAY_SIZE(trizeps4_led), +}; + +static struct platform_device leds_devices = { + .name = "leds-gpio", + .id = -1, .dev = { - .platform_data = tri_serial_ports, + .platform_data = &trizeps4_led_data, }, - .num_resources = 0, - .resource = NULL, }; -static struct platform_device * trizeps4_devices[] __initdata = { +static struct platform_device *trizeps4_devices[] __initdata = { &flash_device, - &uart_devices, &dm9000_device, + &leds_devices, +}; + +static struct platform_device *trizeps4wl_devices[] __initdata = { + &flash_device, + &leds_devices, }; -#ifdef CONFIG_MACH_TRIZEPS4_CONXS static short trizeps_conxs_bcr; /* PCCARD power switching supports only 3,3V */ @@ -192,108 +299,63 @@ void board_pcmcia_power(int power) /* switch power on, put in reset and enable buffers */ trizeps_conxs_bcr |= power; trizeps_conxs_bcr |= ConXS_BCR_CF_RESET; - trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN); - ConXS_BCR = trizeps_conxs_bcr; + trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN; + BCR_writew(trizeps_conxs_bcr); /* wait a little */ udelay(2000); /* take reset away */ - trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET); - ConXS_BCR = trizeps_conxs_bcr; + trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET; + BCR_writew(trizeps_conxs_bcr); udelay(2000); } else { /* put in reset */ trizeps_conxs_bcr |= ConXS_BCR_CF_RESET; - ConXS_BCR = trizeps_conxs_bcr; + BCR_writew(trizeps_conxs_bcr); udelay(1000); /* switch power off */ - trizeps_conxs_bcr &= ~(0xf); - ConXS_BCR = trizeps_conxs_bcr; - + trizeps_conxs_bcr &= ~0xf; + BCR_writew(trizeps_conxs_bcr); } - pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr); + pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff", + trizeps_conxs_bcr); } +EXPORT_SYMBOL(board_pcmcia_power); /* backlight power switching for LCD panel */ static void board_backlight_power(int on) { - if (on) { + if (on) trizeps_conxs_bcr |= ConXS_BCR_L_DISP; - } else { + else trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP; - } - pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr); - ConXS_BCR = trizeps_conxs_bcr; -} -/* Powersupply for MMC/SD cardslot */ -static void board_mci_power(struct device *dev, unsigned int vdd) -{ - struct pxamci_platform_data* p_d = dev->platform_data; - - if (( 1 << vdd) & p_d->ocr_mask) { - pr_debug("%s: on\n", __func__); - /* FIXME fill in values here */ - } else { - pr_debug("%s: off\n", __func__); - /* FIXME fill in values here */ - } -} - -static short trizeps_conxs_ircr; - -/* Switch modes and Power for IRDA receiver */ -static void board_irda_mode(struct device *dev, int mode) -{ - unsigned long flags; - - local_irq_save(flags); - if (mode & IR_SIRMODE) { - /* Slow mode */ - trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; - } else if (mode & IR_FIRMODE) { - /* Fast mode */ - trizeps_conxs_ircr |= ConXS_IRCR_MODE; - } - pxa2xx_transceiver_mode(dev, mode); - if (mode & IR_OFF) { - trizeps_conxs_ircr |= ConXS_IRCR_SD; - } else { - trizeps_conxs_ircr &= ~ConXS_IRCR_SD; - } - /* FIXME write values to register */ - local_irq_restore(flags); + pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", + trizeps_conxs_bcr); + BCR_writew(trizeps_conxs_bcr); } -#else -/* for other baseboards define dummies */ -void board_pcmcia_power(int power) {;} -#define board_backlight_power NULL -#define board_mci_power NULL -#define board_irda_mode NULL - -#endif /* CONFIG_MACH_TRIZEPS4_CONXS */ -EXPORT_SYMBOL(board_pcmcia_power); +/* a I2C based RTC is known on CONXS board */ +static struct i2c_board_info trizeps4_i2c_devices[] __initdata = { + { I2C_BOARD_INFO("rtc-pcf8593", 0x51) } +}; -static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, void *data) +/**************************************************************************** + * MMC card slot external to module + ****************************************************************************/ +static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, + void *data) { int err; - /* setup GPIO for PXA27x MMC controller */ - pxa_gpio_mode(GPIO32_MMCCLK_MD); - pxa_gpio_mode(GPIO112_MMCCMD_MD); - pxa_gpio_mode(GPIO92_MMCDAT0_MD); - pxa_gpio_mode(GPIO109_MMCDAT1_MD); - pxa_gpio_mode(GPIO110_MMCDAT2_MD); - pxa_gpio_mode(GPIO111_MMCDAT3_MD); - - pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN); err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_RISING, - "MMC card detect", data); - if (err) - printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - - return err; + IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request" + "MMC card detect IRQ\n"); + return -1; + } + return 0; } static void trizeps4_mci_exit(struct device *dev, void *data) @@ -303,39 +365,69 @@ static void trizeps4_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data trizeps4_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .detect_delay = 1, .init = trizeps4_mci_init, .exit = trizeps4_mci_exit, - .setpower = board_mci_power, + .get_ro = NULL, /* write-protection not supported */ + .setpower = NULL, /* power-switching not supported */ }; -static struct pxaficp_platform_data trizeps4_ficp_platform_data = { - .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, - .transceiver_mode = board_irda_mode, -}; +/**************************************************************************** + * IRDA mode switching on stuart + ****************************************************************************/ +#ifndef STATUS_LEDS_ON_STUART_PINS +static short trizeps_conxs_ircr; -static int trizeps4_ohci_init(struct device *dev) +static int trizeps4_irda_startup(struct device *dev) { - /* setup Port1 GPIO pin. */ - pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ - pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ - - /* Set the Power Control Polarity Low and Power Sense - Polarity Low to active low. */ - UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); - + trizeps_conxs_ircr &= ~ConXS_IRCR_SD; + IRCR_writew(trizeps_conxs_ircr); return 0; } -static void trizeps4_ohci_exit(struct device *dev) +static void trizeps4_irda_shutdown(struct device *dev) +{ + trizeps_conxs_ircr |= ConXS_IRCR_SD; + IRCR_writew(trizeps_conxs_ircr); +} + +static void trizeps4_irda_transceiver_mode(struct device *dev, int mode) { - ; + unsigned long flags; + + local_irq_save(flags); + /* Switch mode */ + if (mode & IR_SIRMODE) + trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */ + else if (mode & IR_FIRMODE) { + trizeps_conxs_ircr |= ConXS_IRCR_MODE; /* Fast mode */ + + /* Switch power */ + if (mode & IR_OFF) + trizeps_conxs_ircr |= ConXS_IRCR_SD; + else + trizeps_conxs_ircr &= ~ConXS_IRCR_SD; + + IRCR_writew(trizeps_conxs_ircr); + local_irq_restore(flags); + + pxa2xx_transceiver_mode(dev, mode); } +static struct pxaficp_platform_data trizeps4_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = trizeps4_irda_transceiver_mode, + .startup = trizeps4_irda_startup, + .shutdown = trizeps4_irda_shutdown, +}; +#endif + +/**************************************************************************** + * OHCI USB port + ****************************************************************************/ static struct pxaohci_platform_data trizeps4_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, - .init = trizeps4_ohci_init, - .exit = trizeps4_ohci_exit, + .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, }; static struct map_desc trizeps4_io_desc[] __initdata = { @@ -372,105 +464,80 @@ static struct map_desc trizeps4_io_desc[] __initdata = { }; static struct pxafb_mode_info sharp_lcd_mode = { - .pixclock = 78000, - .xres = 640, - .yres = 480, - .bpp = 8, - .hsync_len = 4, - .left_margin = 4, - .right_margin = 4, - .vsync_len = 2, - .upper_margin = 0, - .lower_margin = 0, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .cmap_greyscale = 0, + .pixclock = 78000, + .xres = 640, + .yres = 480, + .bpp = 8, + .hsync_len = 4, + .left_margin = 4, + .right_margin = 4, + .vsync_len = 2, + .upper_margin = 0, + .lower_margin = 0, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .cmap_greyscale = 0, }; static struct pxafb_mach_info sharp_lcd = { - .modes = &sharp_lcd_mode, - .num_modes = 1, - .cmap_inverse = 0, - .cmap_static = 0, - .lccr0 = LCCR0_Color | LCCR0_Pas | LCCR0_Dual, - .lccr3 = 0x0340ff02, - .pxafb_backlight_power = board_backlight_power, + .modes = &sharp_lcd_mode, + .num_modes = 1, + .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL, + .cmap_inverse = 0, + .cmap_static = 0, + .pxafb_backlight_power = board_backlight_power, }; static struct pxafb_mode_info toshiba_lcd_mode = { - .pixclock = 39720, - .xres = 640, - .yres = 480, - .bpp = 8, - .hsync_len = 63, - .left_margin = 12, - .right_margin = 12, - .vsync_len = 4, - .upper_margin = 32, - .lower_margin = 10, - .sync = 0, - .cmap_greyscale = 0, + .pixclock = 39720, + .xres = 640, + .yres = 480, + .bpp = 8, + .hsync_len = 63, + .left_margin = 12, + .right_margin = 12, + .vsync_len = 4, + .upper_margin = 32, + .lower_margin = 10, + .sync = 0, + .cmap_greyscale = 0, }; static struct pxafb_mach_info toshiba_lcd = { - .modes = &toshiba_lcd_mode, - .num_modes = 1, - .cmap_inverse = 0, - .cmap_static = 0, - .lccr0 = LCCR0_Color | LCCR0_Act, - .lccr3 = 0x03400002, - .pxafb_backlight_power = board_backlight_power, + .modes = &toshiba_lcd_mode, + .num_modes = 1, + .lcd_conn = (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL), + .cmap_inverse = 0, + .cmap_static = 0, + .pxafb_backlight_power = board_backlight_power, }; static void __init trizeps4_init(void) { - platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices)); + pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config)); + if (machine_is_trizeps4wl()) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config)); + platform_add_devices(trizeps4wl_devices, + ARRAY_SIZE(trizeps4wl_devices)); + } else { + platform_add_devices(trizeps4_devices, + ARRAY_SIZE(trizeps4_devices)); + } -/* set_pxa_fb_info(&sharp_lcd); */ - set_pxa_fb_info(&toshiba_lcd); + if (0) /* dont know how to determine LCD */ + set_pxa_fb_info(&sharp_lcd); + else + set_pxa_fb_info(&toshiba_lcd); pxa_set_mci_info(&trizeps4_mci_platform_data); +#ifndef STATUS_LEDS_ON_STUART_PINS pxa_set_ficp_info(&trizeps4_ficp_platform_data); +#endif pxa_set_ohci_info(&trizeps4_ohci_platform_data); pxa_set_ac97_info(NULL); -} - -static void __init trizeps4_map_io(void) -{ - pxa_map_io(); - iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc)); - - /* for DiskOnChip */ - pxa_gpio_mode(GPIO15_nCS_1_MD); - - /* for off-module PIC on ConXS board */ - pxa_gpio_mode(GPIO_PIC | GPIO_IN); - - /* UCB1400 irq */ - pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN); - - /* for DM9000 LAN */ - pxa_gpio_mode(GPIO78_nCS_2_MD); - pxa_gpio_mode(GPIO_DM9000 | GPIO_IN); - - /* for PCMCIA device */ - pxa_gpio_mode(GPIO_PCD | GPIO_IN); - pxa_gpio_mode(GPIO_PRDY | GPIO_IN); - - /* for I2C adapter */ - pxa_gpio_mode(GPIO117_I2CSCL_MD); - pxa_gpio_mode(GPIO118_I2CSDA_MD); + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, trizeps4_i2c_devices, + ARRAY_SIZE(trizeps4_i2c_devices)); - /* MMC_DET s.o. */ - pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN); - - /* whats that for ??? */ - pxa_gpio_mode(GPIO79_nCS_3_MD); - -#ifdef CONFIG_LEDS - pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */ - pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */ -#endif -#ifdef CONFIG_MACH_TRIZEPS4_CONXS #ifdef CONFIG_IDE_PXA_CF /* if boot direct from compact flash dont disable power */ trizeps_conxs_bcr = 0x0009; @@ -478,18 +545,24 @@ static void __init trizeps4_map_io(void) /* this is the reset value */ trizeps_conxs_bcr = 0x00A0; #endif - ConXS_BCR = trizeps_conxs_bcr; -#endif + BCR_writew(trizeps_conxs_bcr); + board_backlight_power(1); +} + +static void __init trizeps4_map_io(void) +{ + pxa_map_io(); + iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc)); -#warning FIXME - accessing PM registers directly is deprecated - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x0158C000; - PGSR1 = 0x00FF0080; - PGSR2 = 0x0001C004; - /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ - PCFR |= PCFR_OPDE; + if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) { + /* if flash is 16 bit wide its a Trizeps4 WL */ + __machine_arch_type = MACH_TYPE_TRIZEPS4WL; + trizeps4_flash_data[0].width = 2; + } else { + /* if flash is 32 bit wide its a Trizeps4 */ + __machine_arch_type = MACH_TYPE_TRIZEPS4; + trizeps4_flash_data[0].width = 4; + } } MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") @@ -503,3 +576,13 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .timer = &pxa_timer, MACHINE_END +MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") + /* MAINTAINER("Jürgen Schindele") */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, + .init_machine = trizeps4_init, + .map_io = trizeps4_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c new file mode 100644 index 00000000000..d7632f63603 --- /dev/null +++ b/arch/arm/mach-pxa/viper.c @@ -0,0 +1,951 @@ +/* + * linux/arch/arm/mach-pxa/viper.c + * + * Support for the Arcom VIPER SBC. + * + * Author: Ian Campbell + * Created: Feb 03, 2003 + * Copyright: Arcom Control Systems + * + * Maintained by Marc Zyngier <maz@misterjones.org> + * <marc.zyngier@altran.com> + * + * Based on lubbock.c: + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/types.h> +#include <linux/memory.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/major.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/sched.h> +#include <linux/gpio.h> +#include <linux/i2c-gpio.h> +#include <linux/serial_8250.h> +#include <linux/smc91x.h> +#include <linux/pwm_backlight.h> +#include <linux/usb/isp116x.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-regs.h> +#include <mach/bitfield.h> +#include <mach/audio.h> +#include <mach/pxafb.h> +#include <mach/mfp-pxa25x.h> +#include <mach/i2c.h> +#include <mach/viper.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/sizes.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "generic.h" +#include "devices.h" + +static unsigned int icr; + +static void viper_icr_set_bit(unsigned int bit) +{ + icr |= bit; + VIPER_ICR = icr; +} + +static void viper_icr_clear_bit(unsigned int bit) +{ + icr &= ~bit; + VIPER_ICR = icr; +} + +/* This function is used from the pcmcia module to reset the CF */ +void viper_cf_rst(int state) +{ + if (state) + viper_icr_set_bit(VIPER_ICR_CF_RST); + else + viper_icr_clear_bit(VIPER_ICR_CF_RST); +} +EXPORT_SYMBOL(viper_cf_rst); + +/* + * The CPLD version register was not present on VIPER boards prior to + * v2i1. On v1 boards where the version register is not present we + * will just read back the previous value from the databus. + * + * Therefore we do two reads. The first time we write 0 to the + * (read-only) register before reading and the second time we write + * 0xff first. If the two reads do not match or they read back as 0xff + * or 0x00 then we have version 1 hardware. + */ +static u8 viper_hw_version(void) +{ + u8 v1, v2; + unsigned long flags; + + local_irq_save(flags); + + VIPER_VERSION = 0; + v1 = VIPER_VERSION; + VIPER_VERSION = 0xff; + v2 = VIPER_VERSION; + + v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1; + + local_irq_restore(flags); + return v1; +} + +/* CPU sysdev */ +static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state) +{ + viper_icr_set_bit(VIPER_ICR_R_DIS); + return 0; +} + +static int viper_cpu_resume(struct sys_device *sysdev) +{ + viper_icr_clear_bit(VIPER_ICR_R_DIS); + return 0; +} + +static struct sysdev_driver viper_cpu_sysdev_driver = { + .suspend = viper_cpu_suspend, + .resume = viper_cpu_resume, +}; + +static unsigned int current_voltage_divisor; + +/* + * If force is not true then step from existing to new divisor. If + * force is true then jump straight to the new divisor. Stepping is + * used because if the jump in voltage is too large, the VCC can dip + * too low and the regulator cuts out. + * + * force can be used to initialize the divisor to a know state by + * setting the value for the current clock speed, since we are already + * running at that speed we know the voltage should be pretty close so + * the jump won't be too large + */ +static void viper_set_core_cpu_voltage(unsigned long khz, int force) +{ + int i = 0; + unsigned int divisor = 0; + const char *v; + + if (khz < 200000) { + v = "1.0"; divisor = 0xfff; + } else if (khz < 300000) { + v = "1.1"; divisor = 0xde5; + } else { + v = "1.3"; divisor = 0x325; + } + + pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n", + v, (int)khz / 1000, (int)khz % 1000); + +#define STEP 0x100 + do { + int step; + + if (force) + step = divisor; + else if (current_voltage_divisor < divisor - STEP) + step = current_voltage_divisor + STEP; + else if (current_voltage_divisor > divisor + STEP) + step = current_voltage_divisor - STEP; + else + step = divisor; + force = 0; + + gpio_set_value(VIPER_PSU_CLK_GPIO, 0); + gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0); + + for (i = 1 << 11 ; i > 0 ; i >>= 1) { + udelay(1); + + gpio_set_value(VIPER_PSU_DATA_GPIO, step & i); + udelay(1); + + gpio_set_value(VIPER_PSU_CLK_GPIO, 1); + udelay(1); + + gpio_set_value(VIPER_PSU_CLK_GPIO, 0); + } + udelay(1); + + gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1); + udelay(1); + + gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0); + + current_voltage_divisor = step; + } while (current_voltage_divisor != divisor); +} + +/* Interrupt handling */ +static unsigned long viper_irq_enabled_mask; + +static void viper_ack_irq(unsigned int irq) +{ + int viper_irq = irq - PXA_ISA_IRQ(0); + + if (viper_irq < 8) + VIPER_LO_IRQ_STATUS = 1 << viper_irq; + else + VIPER_HI_IRQ_STATUS = 1 << (viper_irq - 8); +} + +static void viper_mask_irq(unsigned int irq) +{ + viper_irq_enabled_mask &= ~(1 << (irq - PXA_ISA_IRQ(0))); +} + +static void viper_unmask_irq(unsigned int irq) +{ + viper_irq_enabled_mask |= (1 << (irq - PXA_ISA_IRQ(0))); +} + +static inline unsigned long viper_irq_pending(void) +{ + return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) & + viper_irq_enabled_mask; +} + +static void viper_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long pending; + + pending = viper_irq_pending(); + do { + if (likely(pending)) { + irq = PXA_ISA_IRQ(0) + __ffs(pending); + generic_handle_irq(irq); + } + pending = viper_irq_pending(); + } while (pending); +} + +static struct irq_chip viper_irq_chip = { + .name = "ISA", + .ack = viper_ack_irq, + .mask = viper_mask_irq, + .unmask = viper_unmask_irq +}; + +static void __init viper_init_irq(void) +{ + const int isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 }; + int irq; + int isa_irq; + + pxa25x_init_irq(); + + /* setup ISA IRQs */ + for (irq = 0; irq < ARRAY_SIZE(isa_irqs); irq++) { + isa_irq = isa_irqs[irq]; + set_irq_chip(isa_irq, &viper_irq_chip); + set_irq_handler(isa_irq, handle_edge_irq); + set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE); + } + + set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO), + viper_irq_handler); + set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH); + +#ifndef CONFIG_SERIAL_PXA + /* + * 8250 doesn't support IRQ_TYPE being passed as part + * of the plat_serial8250_port structure... + */ + set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING); +#endif +} + +/* Flat Panel */ +static struct pxafb_mode_info fb_mode_info[] = { + { + .pixclock = 157500, + + .xres = 320, + .yres = 240, + + .bpp = 16, + + .hsync_len = 63, + .left_margin = 7, + .right_margin = 13, + + .vsync_len = 20, + .upper_margin = 0, + .lower_margin = 0, + + .sync = 0, + }, +}; + +static struct pxafb_mach_info fb_info = { + .modes = fb_mode_info, + .num_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +static int viper_backlight_init(struct device *dev) +{ + int ret; + + /* GPIO9 and 10 control FB backlight. Initialise to off */ + ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight"); + if (ret) + goto err_request_bckl; + + ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD"); + if (ret) + goto err_request_lcd; + + ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0); + if (ret) + goto err_dir; + + ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0); + if (ret) + goto err_dir; + + return 0; + +err_dir: + gpio_free(VIPER_LCD_EN_GPIO); +err_request_lcd: + gpio_free(VIPER_BCKLIGHT_EN_GPIO); +err_request_bckl: + dev_err(dev, "Failed to setup LCD GPIOs\n"); + + return ret; +} + +static int viper_backlight_notify(int brightness) +{ + gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness); + gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness); + + return brightness; +} + +static void viper_backlight_exit(struct device *dev) +{ + gpio_free(VIPER_LCD_EN_GPIO); + gpio_free(VIPER_BCKLIGHT_EN_GPIO); +} + +static struct platform_pwm_backlight_data viper_backlight_data = { + .pwm_id = 0, + .max_brightness = 100, + .dft_brightness = 100, + .pwm_period_ns = 1000000, + .init = viper_backlight_init, + .notify = viper_backlight_notify, + .exit = viper_backlight_exit, +}; + +static struct platform_device viper_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa25x_device_pwm0.dev, + .platform_data = &viper_backlight_data, + }, +}; + +/* Ethernet */ +static struct resource smc91x_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = VIPER_ETH_PHYS + 0x300, + .end = VIPER_ETH_PHYS + 0x30f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gpio_to_irq(VIPER_ETH_GPIO), + .end = gpio_to_irq(VIPER_ETH_GPIO), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, + [2] = { + .name = "smc91x-data32", + .start = VIPER_ETH_DATA_PHYS, + .end = VIPER_ETH_DATA_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct smc91x_platdata viper_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, + .dev = { + .platform_data = &viper_smc91x_info, + }, +}; + +/* i2c */ +static struct i2c_gpio_platform_data i2c_bus_data = { + .sda_pin = VIPER_RTC_I2C_SDA_GPIO, + .scl_pin = VIPER_RTC_I2C_SCL_GPIO, + .udelay = 10, + .timeout = 100, +}; + +static struct platform_device i2c_bus_device = { + .name = "i2c-gpio", + .id = 1, /* pxa2xx-i2c is bus 0, so start at 1 */ + .dev = { + .platform_data = &i2c_bus_data, + } +}; + +static struct i2c_board_info __initdata viper_i2c_devices[] = { + { + I2C_BOARD_INFO("ds1338", 0x68), + }, +}; + +/* + * Serial configuration: + * You can either have the standard PXA ports driven by the PXA driver, + * or all the ports (PXA + 16850) driven by the 8250 driver. + * Choose your poison. + */ + +static struct resource viper_serial_resources[] = { +#ifndef CONFIG_SERIAL_PXA + { + .start = 0x40100000, + .end = 0x4010001f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x40200000, + .end = 0x4020001f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x40700000, + .end = 0x4070001f, + .flags = IORESOURCE_MEM, + }, + { + .start = VIPER_UARTA_PHYS, + .end = VIPER_UARTA_PHYS + 0xf, + .flags = IORESOURCE_MEM, + }, + { + .start = VIPER_UARTB_PHYS, + .end = VIPER_UARTB_PHYS + 0xf, + .flags = IORESOURCE_MEM, + }, +#else + { + 0, + }, +#endif +}; + +static struct plat_serial8250_port serial_platform_data[] = { +#ifndef CONFIG_SERIAL_PXA + /* Internal UARTs */ + { + .membase = (void *)&FFUART, + .mapbase = __PREG(FFUART), + .irq = IRQ_FFUART, + .uartclk = 921600 * 16, + .regshift = 2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { + .membase = (void *)&BTUART, + .mapbase = __PREG(BTUART), + .irq = IRQ_BTUART, + .uartclk = 921600 * 16, + .regshift = 2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { + .membase = (void *)&STUART, + .mapbase = __PREG(STUART), + .irq = IRQ_STUART, + .uartclk = 921600 * 16, + .regshift = 2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + /* External UARTs */ + { + .mapbase = VIPER_UARTA_PHYS, + .irq = gpio_to_irq(VIPER_UARTA_GPIO), + .uartclk = 1843200, + .regshift = 1, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | + UPF_SKIP_TEST, + }, + { + .mapbase = VIPER_UARTB_PHYS, + .irq = gpio_to_irq(VIPER_UARTB_GPIO), + .uartclk = 1843200, + .regshift = 1, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | + UPF_SKIP_TEST, + }, +#endif + { }, +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, + .num_resources = ARRAY_SIZE(viper_serial_resources), + .resource = viper_serial_resources, +}; + +/* USB */ +static void isp116x_delay(struct device *dev, int delay) +{ + ndelay(delay); +} + +static struct resource isp116x_resources[] = { + [0] = { /* DATA */ + .start = VIPER_USB_PHYS + 0, + .end = VIPER_USB_PHYS + 1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* ADDR */ + .start = VIPER_USB_PHYS + 2, + .end = VIPER_USB_PHYS + 3, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = gpio_to_irq(VIPER_USB_GPIO), + .end = gpio_to_irq(VIPER_USB_GPIO), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */ +static struct isp116x_platform_data isp116x_platform_data = { + /* Enable internal resistors on downstream ports */ + .sel15Kres = 1, + /* On-chip overcurrent protection */ + .oc_enable = 1, + /* INT output polarity */ + .int_act_high = 1, + /* INT edge or level triggered */ + .int_edge_triggered = 0, + + /* WAKEUP pin connected - NOT SUPPORTED */ + /* .remote_wakeup_connected = 0, */ + /* Wakeup by devices on usb bus enabled */ + .remote_wakeup_enable = 0, + .delay = isp116x_delay, +}; + +static struct platform_device isp116x_device = { + .name = "isp116x-hcd", + .id = -1, + .num_resources = ARRAY_SIZE(isp116x_resources), + .resource = isp116x_resources, + .dev = { + .platform_data = &isp116x_platform_data, + }, + +}; + +/* MTD */ +static struct resource mtd_resources[] = { + [0] = { /* RedBoot config + filesystem flash */ + .start = VIPER_FLASH_PHYS, + .end = VIPER_FLASH_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* Boot flash */ + .start = VIPER_BOOT_PHYS, + .end = VIPER_BOOT_PHYS + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { /* + * SRAM size is actually 256KB, 8bits, with a sparse mapping + * (each byte is on a 16bit boundary). + */ + .start = _VIPER_SRAM_BASE, + .end = _VIPER_SRAM_BASE + SZ_512K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition viper_boot_flash_partition = { + .name = "RedBoot", + .size = SZ_1M, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force R/O */ +}; + +static struct physmap_flash_data viper_flash_data[] = { + [0] = { + .width = 2, + .parts = NULL, + .nr_parts = 0, + }, + [1] = { + .width = 2, + .parts = &viper_boot_flash_partition, + .nr_parts = 1, + }, +}; + +static struct platform_device viper_mtd_devices[] = { + [0] = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &viper_flash_data[0], + }, + .resource = &mtd_resources[0], + .num_resources = 1, + }, + [1] = { + .name = "physmap-flash", + .id = 1, + .dev = { + .platform_data = &viper_flash_data[1], + }, + .resource = &mtd_resources[1], + .num_resources = 1, + }, +}; + +static struct platform_device *viper_devs[] __initdata = { + &smc91x_device, + &i2c_bus_device, + &serial_device, + &isp116x_device, + &viper_mtd_devices[0], + &viper_mtd_devices[1], + &viper_backlight_device, +}; + +static mfp_cfg_t viper_pin_config[] __initdata = { + /* Chip selects */ + GPIO15_nCS_1, + GPIO78_nCS_2, + GPIO79_nCS_3, + GPIO80_nCS_4, + GPIO33_nCS_5, + + /* FP Backlight */ + GPIO9_GPIO, /* VIPER_BCKLIGHT_EN_GPIO */ + GPIO10_GPIO, /* VIPER_LCD_EN_GPIO */ + GPIO16_PWM0_OUT, + + /* Ethernet PHY Ready */ + GPIO18_RDY, + + /* Serial shutdown */ + GPIO12_GPIO | MFP_LPM_DRIVE_HIGH, /* VIPER_UART_SHDN_GPIO */ + + /* Compact-Flash / PC104 */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO8_GPIO, /* VIPER_CF_RDY_GPIO */ + GPIO32_GPIO, /* VIPER_CF_CD_GPIO */ + GPIO82_GPIO, /* VIPER_CF_POWER_GPIO */ + + /* Integrated UPS control */ + GPIO20_GPIO, /* VIPER_UPS_GPIO */ + + /* Vcc regulator control */ + GPIO6_GPIO, /* VIPER_PSU_DATA_GPIO */ + GPIO11_GPIO, /* VIPER_PSU_CLK_GPIO */ + GPIO19_GPIO, /* VIPER_PSU_nCS_LD_GPIO */ + + /* i2c busses */ + GPIO26_GPIO, /* VIPER_TPM_I2C_SDA_GPIO */ + GPIO27_GPIO, /* VIPER_TPM_I2C_SCL_GPIO */ + GPIO83_GPIO, /* VIPER_RTC_I2C_SDA_GPIO */ + GPIO84_GPIO, /* VIPER_RTC_I2C_SCL_GPIO */ + + /* PC/104 Interrupt */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* VIPER_CPLD_GPIO */ +}; + +static unsigned long viper_tpm; + +static int __init viper_tpm_setup(char *str) +{ + strict_strtoul(str, 10, &viper_tpm); + return 1; +} + +__setup("tpm=", viper_tpm_setup); + +static void __init viper_tpm_init(void) +{ + struct platform_device *tpm_device; + struct i2c_gpio_platform_data i2c_tpm_data = { + .sda_pin = VIPER_TPM_I2C_SDA_GPIO, + .scl_pin = VIPER_TPM_I2C_SCL_GPIO, + .udelay = 10, + .timeout = 100, + }; + char *errstr; + + /* Allocate TPM i2c bus if requested */ + if (!viper_tpm) + return; + + tpm_device = platform_device_alloc("i2c-gpio", 2); + if (tpm_device) { + if (!platform_device_add_data(tpm_device, + &i2c_tpm_data, + sizeof(i2c_tpm_data))) { + if (platform_device_add(tpm_device)) { + errstr = "register TPM i2c bus"; + goto error_free_tpm; + } + } else { + errstr = "allocate TPM i2c bus data"; + goto error_free_tpm; + } + } else { + errstr = "allocate TPM i2c device"; + goto error_tpm; + } + + return; + +error_free_tpm: + kfree(tpm_device); +error_tpm: + pr_err("viper: Couldn't %s, giving up\n", errstr); +} + +static void __init viper_init_vcore_gpios(void) +{ + if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data")) + goto err_request_data; + + if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock")) + goto err_request_clk; + + if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs")) + goto err_request_cs; + + if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) || + gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) || + gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0)) + goto err_dir; + + /* c/should assume redboot set the correct level ??? */ + viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1); + + return; + +err_dir: + gpio_free(VIPER_PSU_nCS_LD_GPIO); +err_request_cs: + gpio_free(VIPER_PSU_CLK_GPIO); +err_request_clk: + gpio_free(VIPER_PSU_DATA_GPIO); +err_request_data: + pr_err("viper: Failed to setup vcore control GPIOs\n"); +} + +static void __init viper_init_serial_gpio(void) +{ + if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown")) + goto err_request; + + if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0)) + goto err_dir; + + return; + +err_dir: + gpio_free(VIPER_UART_SHDN_GPIO); +err_request: + pr_err("viper: Failed to setup UART shutdown GPIO\n"); +} + +#ifdef CONFIG_CPU_FREQ +static int viper_cpufreq_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + + /* TODO: Adjust timings??? */ + + switch (val) { + case CPUFREQ_PRECHANGE: + if (freq->old < freq->new) { + /* we are getting faster so raise the voltage + * before we change freq */ + viper_set_core_cpu_voltage(freq->new, 0); + } + break; + case CPUFREQ_POSTCHANGE: + if (freq->old > freq->new) { + /* we are slowing down so drop the power + * after we change freq */ + viper_set_core_cpu_voltage(freq->new, 0); + } + break; + case CPUFREQ_RESUMECHANGE: + viper_set_core_cpu_voltage(freq->new, 0); + break; + default: + /* ignore */ + break; + } + + return 0; +} + +static struct notifier_block viper_cpufreq_notifier_block = { + .notifier_call = viper_cpufreq_notifier +}; + +static void __init viper_init_cpufreq(void) +{ + if (cpufreq_register_notifier(&viper_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER)) + pr_err("viper: Failed to setup cpufreq notifier\n"); +} +#else +static inline void viper_init_cpufreq(void) {} +#endif + +static void viper_power_off(void) +{ + pr_notice("Shutting off UPS\n"); + gpio_set_value(VIPER_UPS_GPIO, 1); + /* Spin to death... */ + while (1); +} + +static void __init viper_init(void) +{ + u8 version; + + pm_power_off = viper_power_off; + + pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config)); + + /* Wake-up serial console */ + viper_init_serial_gpio(); + + set_pxa_fb_info(&fb_info); + + /* v1 hardware cannot use the datacs line */ + version = viper_hw_version(); + if (version == 0) + smc91x_device.num_resources--; + + pxa_set_i2c_info(NULL); + platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs)); + + viper_init_vcore_gpios(); + viper_init_cpufreq(); + + sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver); + + if (version) { + pr_info("viper: hardware v%di%d detected. " + "CPLD revision %d.\n", + VIPER_BOARD_VERSION(version), + VIPER_BOARD_ISSUE(version), + VIPER_CPLD_REVISION(version)); + system_rev = (VIPER_BOARD_VERSION(version) << 8) | + (VIPER_BOARD_ISSUE(version) << 4) | + VIPER_CPLD_REVISION(version); + } else { + pr_info("viper: No version register.\n"); + } + + i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices)); + + viper_tpm_init(); + pxa_set_ac97_info(NULL); +} + +static struct map_desc viper_io_desc[] __initdata = { + { + .virtual = VIPER_CPLD_BASE, + .pfn = __phys_to_pfn(VIPER_CPLD_PHYS), + .length = 0x00300000, + .type = MT_DEVICE, + }, + { + .virtual = VIPER_PC104IO_BASE, + .pfn = __phys_to_pfn(_PCMCIA1IO), + .length = 0x00800000, + .type = MT_DEVICE, + }, +}; + +static void __init viper_map_io(void) +{ + pxa_map_io(); + + iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc)); + + PCFR |= PCFR_OPDE; +} + +MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") + /* Maintainer: Marc Zyngier <maz@misterjones.org> */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = viper_map_io, + .init_irq = viper_init_irq, + .timer = &pxa_timer, + .init_machine = viper_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 0cb65b5772f..81380443346 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -29,6 +29,7 @@ #include <mach/pxafb.h> #include <mach/zylonite.h> #include <mach/mmc.h> +#include <mach/ohci.h> #include <mach/pxa27x_keypad.h> #include <mach/pxa3xx_nand.h> @@ -423,6 +424,21 @@ static void __init zylonite_init_nand(void) static inline void zylonite_init_nand(void) {} #endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct pxaohci_platform_data zylonite_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | + POWER_CONTROL_LOW | POWER_SENSE_LOW, +}; + +static void __init zylonite_init_ohci(void) +{ + pxa_set_ohci_info(&zylonite_ohci_info); +} +#else +static inline void zylonite_init_ohci(void) {} +#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */ + static void __init zylonite_init(void) { /* board-processor specific initialization */ @@ -443,6 +459,7 @@ static void __init zylonite_init(void) zylonite_init_keypad(); zylonite_init_nand(); zylonite_init_leds(); + zylonite_init_ohci(); } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 095f5c64823..46538885a58 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -73,6 +73,12 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + /* SSP3 */ + GPIO91_SSP3_SCLK, + GPIO92_SSP3_FRM, + GPIO93_SSP3_TXD, + GPIO94_SSP3_RXD, + /* WM9713 IRQ */ GPIO26_GPIO, @@ -113,6 +119,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO13_MMC2_CLK, GPIO14_MMC2_CMD, + /* USB Host */ + GPIO0_2_USBH_PEN, + GPIO1_2_USBH_PWR, + /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, @@ -209,7 +219,7 @@ static struct pca953x_platform_data gpio_exp[] = { }, }; -struct i2c_board_info zylonite_i2c_board_info[] = { +static struct i2c_board_info zylonite_i2c_board_info[] = { { .type = "pca9539", .addr = 0x74, diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 9879d7da2df..0f244744daa 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -69,6 +69,12 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + /* SSP3 */ + GPIO89_SSP3_SCLK, + GPIO90_SSP3_FRM, + GPIO91_SSP3_TXD, + GPIO92_SSP3_RXD, + /* WM9713 IRQ */ GPIO15_GPIO, @@ -117,6 +123,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO28_MMC2_CLK, GPIO29_MMC2_CMD, + /* USB Host */ + GPIO2_2_USBH_PEN, + GPIO3_2_USBH_PWR, + /* Debug LEDs */ GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH, GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH, |