6 files changed, 10 insertions, 8 deletions
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 811743c5614..5f2ba8d9015 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -2,6 +2,7 @@
 #define _COLIBRI_H_
 
 #include <net/ax88796.h>
+#include <mach/mfp.h>
 
 /*
  * common settings for all modules
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 7515757d691..3d8d8cb0968 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -202,7 +202,7 @@
 #define __cpu_is_pxa950(id)                             \
 	({                                              \
 		unsigned int _id = (id) >> 4 & 0xfff;	\
-		id == 0x697;				\
+		_id == 0x697;				\
 	 })
 #else
 #define __cpu_is_pxa950(id)	(0)
diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h
index 44b0b20b69a..c15c0c57de0 100644
--- a/arch/arm/mach-pxa/include/mach/regs-u2d.h
+++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h
@@ -166,7 +166,8 @@
 #define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
 #define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
 #define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
-#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
+#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */
+#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
 #define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
 #define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
 #define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 44bb675e47f..d12667bd9eb 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -983,7 +983,7 @@ static void __init raumfeld_common_init(void)
 		int i;
 
 		for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
-			if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+			if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
 				gpio_keys_button[i].active_low = 1;
 	}
 
@@ -1009,8 +1009,7 @@ static void __init raumfeld_common_init(void)
 		gpio_direction_output(GPIO_W2W_PDN, 0);
 
 	/* this can be used to switch off the device */
-	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
-				"supply shutdown");
+	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
 	else
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 19b5109d980..01bdd7500df 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -363,7 +363,7 @@ static struct gpio_keys_button spitz_gpio_keys[] = {
 		.type	= EV_PWR,
 		.code	= KEY_SUSPEND,
 		.gpio	= SPITZ_GPIO_ON_KEY,
-		.desc	= "On/Off",
+		.desc	= "On Off",
 		.wakeup	= 1,
 	},
 	/* Two buttons detecting the lid state */
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 9e0c5c3988a..e90114a7e24 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -34,6 +34,7 @@
 #include <linux/pm.h>
 #include <linux/sched.h>
 #include <linux/gpio.h>
+#include <linux/jiffies.h>
 #include <linux/i2c-gpio.h>
 #include <linux/serial_8250.h>
 #include <linux/smc91x.h>
@@ -454,7 +455,7 @@ static struct i2c_gpio_platform_data i2c_bus_data = {
 	.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
 	.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
 	.udelay  = 10,
-	.timeout = 100,
+	.timeout = HZ,
 };
 
 static struct platform_device i2c_bus_device = {
@@ -779,7 +780,7 @@ static void __init viper_tpm_init(void)
 		.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
 		.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
 		.udelay  = 10,
-		.timeout = 100,
+		.timeout = HZ,
 	};
 	char *errstr;