1 files changed, 75 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
new file mode 100644
index 00000000000..4dcd2e8baa6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm027.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Definitions of CPU card resources only
+ */
+
+/* I2C RTC */
+#define PCM027_RTC_IRQ_GPIO	0
+#define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define ADR_PCM027_RTC		0x51	/* I2C address */
+
+/* I2C EEPROM */
+#define ADR_PCM027_EEPROM	0x54	/* I2C address */
+
+/* Ethernet chip (SMSC91C111) */
+#define PCM027_ETH_IRQ_GPIO	52
+#define PCM027_ETH_IRQ		IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM027_ETH_PHYS		PXA_CS5_PHYS
+#define PCM027_ETH_SIZE		(1*1024*1024)
+
+/* CAN controller SJA1000 (unsupported yet) */
+#define PCM027_CAN_IRQ_GPIO	114
+#define PCM027_CAN_IRQ		IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define PCM027_CAN_PHYS		0x22000000
+#define PCM027_CAN_SIZE		0x100
+
+/* SPI GPIO expander (unsupported yet) */
+#define PCM027_EGPIO_IRQ_GPIO	27
+#define PCM027_EGPIO_IRQ	IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define PCM027_EGPIO_CS		24
+/*
+ * TODO: Switch this pin from dedicated usage to GPIO if
+ * more than the MAX7301 device is connected to this SPI bus
+ */
+#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
+
+/* Flash memory */
+#define PCM027_FLASH_PHYS	0x00000000
+#define PCM027_FLASH_SIZE	0x02000000
+
+/* onboard LEDs connected to GPIO */
+#define PCM027_LED_CPU		90
+#define PCM027_LED_HEARD_BEAT	91
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own basebaord init function and call it from
+ * inside pcm027_init(). This example here is for the developmen board.
+ * Refer pcm990-baseboard.c
+ */
+extern void pcm990_baseboard_init(void);