1 files changed, 0 insertions, 155 deletions
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
deleted file mode 100644
index 55b950f1284..00000000000
--- a/arch/arm/mach-pxa/e400.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/pxafb.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-	.name = "Internal NAND flash",
-	.offset =  0,
-	.size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-	.num_partitions = 1,
-	.partition = &partition_a,
-	.badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-
-	.nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e400_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e400_t7l66xb_device,
-};
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	/* Fixme - e400 may have a switched clock */
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	set_pxa_fb_info(&e400_pxafb_mach_info);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-