diff options
Diffstat (limited to 'arch/arm/mach-pxa/corgi_pm.c')
| -rw-r--r-- | arch/arm/mach-pxa/corgi_pm.c | 45 |
1 files changed, 25 insertions, 20 deletions
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 599be14754f..de8b2403c92 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -21,6 +21,7 @@ #include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/hardware/scoop.h> +#include <asm/hardware/sharpsl_pm.h> #include <asm/arch/sharpsl.h> #include <asm/arch/corgi.h> @@ -33,19 +34,7 @@ static void corgi_charger_init(void) pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN); -} - -static void corgi_charge_led(int val) -{ - if (val == SHARPSL_LED_ERROR) { - dev_dbg(sharpsl_pm.dev, "Charge LED Error\n"); - } else if (val == SHARPSL_LED_ON) { - dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); - GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); - } else { - dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); - GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); - } + sharpsl_pm_pxa_init(); } static void corgi_measure_temp(int on) @@ -138,15 +127,15 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm) dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR); if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) { - if (STATUS_AC_IN()) { + if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { /* charge on */ dev_dbg(sharpsl_pm.dev, "ac insert\n"); sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; } else { /* charge off */ dev_dbg(sharpsl_pm.dev, "ac remove\n"); - CHARGE_LED_OFF(); - CHARGE_OFF(); + sharpsl_pm_led(SHARPSL_LED_OFF); + sharpsl_pm.machinfo->charge(0); sharpsl_pm.charge_mode = CHRG_OFF; } } @@ -172,23 +161,39 @@ static unsigned long corgi_charger_wakeup(void) return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) ); } -static int corgi_acin_status(void) +unsigned long corgipm_read_devdata(int type) { - return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); + switch(type) { + case SHARPSL_STATUS_ACIN: + return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); + case SHARPSL_STATUS_LOCK: + return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock); + case SHARPSL_STATUS_CHRGFULL: + return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull); + case SHARPSL_STATUS_FATAL: + return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal); + case SHARPSL_ACIN_VOLT: + return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT); + case SHARPSL_BATT_TEMP: + return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP); + case SHARPSL_BATT_VOLT: + default: + return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT); + } } static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .init = corgi_charger_init, + .exit = sharpsl_pm_pxa_remove, .gpio_batlock = CORGI_GPIO_BAT_COVER, .gpio_acin = CORGI_GPIO_AC_IN, .gpio_batfull = CORGI_GPIO_CHRG_FULL, - .status_acin = corgi_acin_status, .discharge = corgi_discharge, .charge = corgi_charge, - .chargeled = corgi_charge_led, .measure_temp = corgi_measure_temp, .presuspend = corgi_presuspend, .postsuspend = corgi_postsuspend, + .read_devdata = corgipm_read_devdata, .charger_wakeup = corgi_charger_wakeup, .should_wakeup = corgi_should_wakeup, .bat_levels = 40, |