diff options
Diffstat (limited to 'arch/arm/mach-pxa/Kconfig')
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 655 |
1 files changed, 357 insertions, 298 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index a6f8eab14ba..dee92182749 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -2,87 +2,78 @@ if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" -if PXA3xx +comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" -menu "Supported PXA3xx Processor Variants" +config ARCH_LUBBOCK + bool "Intel DBPXA250 Development Platform (aka Lubbock)" + select PXA25x + select SA1111 + select PXA_HAVE_BOARD_IRQS -config CPU_PXA300 - bool "PXA300 (codename Monahans-L)" +config MACH_MAINSTONE + bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" + select PXA27x + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS -config CPU_PXA310 - bool "PXA310 (codename Monahans-LV)" +config MACH_ZYLONITE + bool + select PXA3xx + select PXA_SSP + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + +config MACH_ZYLONITE300 + bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" select CPU_PXA300 + select CPU_PXA310 + select MACH_ZYLONITE -config CPU_PXA320 - bool "PXA320 (codename Monahans-P)" +config MACH_ZYLONITE320 + bool "PXA3xx Development Platform (aka Zylonite) PXA320" + select CPU_PXA320 + select MACH_ZYLONITE -config CPU_PXA930 - bool "PXA930 (codename Tavor-P)" +config MACH_LITTLETON + bool "PXA3xx Form Factor Platform (aka Littleton)" + select PXA3xx + select CPU_PXA300 + select CPU_PXA310 + select PXA_SSP -config CPU_PXA935 - bool "PXA935 (codename Tavor-P65)" +config MACH_TAVOREVB + bool "PXA930 Evaluation Board (aka TavorEVB)" + select PXA3xx select CPU_PXA930 -config CPU_PXA950 - bool "PXA950 (codename Tavor-PV2)" +config MACH_SAAR + bool "PXA930 Handheld Platform (aka SAAR)" + select PXA3xx select CPU_PXA930 -endmenu +comment "Third Party Dev Platforms (sorted by vendor name)" -endif - -config ARCH_GUMSTIX - bool "Gumstix XScale 255 boards" +config ARCH_PXA_IDP + bool "Accelent Xscale IDP" select PXA25x - help - Say Y here if you intend to run this kernel on - Basix, Connex, ws-200ax, ws-400ax systems - -choice - prompt "Gumstix Carrier/Expansion Board" - depends on ARCH_GUMSTIX - -config GUMSTIX_AM200EPD - bool "Enable AM200EPD board support" - -config GUMSTIX_AM300EPD - bool "Enable AM300EPD board support" - -endchoice - -config MACH_INTELMOTE2 - bool "Intel Mote 2 Platform" - select PXA27x - select IWMMXT - select PXA_HAVE_BOARD_IRQS - -config MACH_STARGATE2 - bool "Intel Stargate 2 Platform" - select PXA27x - select IWMMXT - select PXA_HAVE_BOARD_IRQS -config ARCH_LUBBOCK - bool "Intel DBPXA250 Development Platform" +config ARCH_VIPER + bool "Arcom/Eurotech VIPER SBC" select PXA25x - select SA1111 - select PXA_HAVE_BOARD_IRQS - -config MACH_LOGICPD_PXA270 - bool "LogicPD PXA270 Card Engine Development Platform" - select PXA27x + select ISA + select I2C_GPIO select HAVE_PWM select PXA_HAVE_BOARD_IRQS + select PXA_HAVE_ISA_IRQS + select ARCOM_PCMCIA -config MACH_MAINSTONE - bool "Intel HCDDBBVA0 Development Platform" +config MACH_ARCOM_ZEUS + bool "Arcom/Eurotech ZEUS SBC" select PXA27x - select HAVE_PWM + select ISA select PXA_HAVE_BOARD_IRQS - -config MACH_MP900C - bool "Nec Mobilepro 900/c" - select PXA25x + select PXA_HAVE_ISA_IRQS + select ARCOM_PCMCIA config MACH_BALLOON3 bool "Balloon 3 board" @@ -90,157 +81,89 @@ config MACH_BALLOON3 select IWMMXT select PXA_HAVE_BOARD_IRQS -config ARCH_PXA_IDP - bool "Accelent Xscale IDP" - select PXA25x - -config PXA_SHARPSL - bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" - select SHARP_SCOOP - select SHARP_PARAM +config MACH_CSB726 + bool "Enable Cogent CSB726 System On a Module" + select PXA27x + select IWMMXT help - Say Y here if you intend to run this kernel on a - Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), - SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), - SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) - handheld computer. - -config SHARPSL_PM - bool - select APM_EMULATION + Say Y here if you intend to run this kernel on a Cogent + CSB726 System On Module. -config CORGI_SSP_DEPRECATED - bool - select PXA_SSP - help - This option will include corgi_ssp.c and corgi_lcd.c - that corgi_ts.c and other legacy drivers (corgi_bl.c - and sharpsl_pm.c) may depend on. +config CSB726_CSB701 + bool "Enable support for CSB701 baseboard" + depends on MACH_CSB726 -config MACH_POODLE - bool "Enable Sharp SL-5600 (Poodle) Support" - depends on PXA_SHARPSL +config MACH_ARMCORE + bool "CompuLab CM-X255/CM-X270 modules" + select PXA27x + select IWMMXT select PXA25x - select SHARP_LOCOMO select PXA_SSP -config MACH_CORGI - bool "Enable Sharp SL-C700 (Corgi) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_SHEPHERD - bool "Enable Sharp SL-C750 (Shepherd) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_HUSKY - bool "Enable Sharp SL-C760 (Husky) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_AKITA - bool "Enable Sharp SL-1000 (Akita) Support" - depends on PXA_SHARPSL - select PXA27x - select PXA_SHARP_Cxx00 - select MACH_SPITZ - select I2C - select I2C_PXA - -config MACH_SPITZ - bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" - depends on PXA_SHARPSL +config MACH_EM_X270 + bool "CompuLab EM-x270 platform" select PXA27x - select PXA_SHARP_Cxx00 -config MACH_BORZOI - bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" - depends on PXA_SHARPSL +config MACH_EXEDA + bool "CompuLab eXeda platform" select PXA27x - select PXA_SHARP_Cxx00 - -config MACH_TOSA - bool "Enable Sharp SL-6000x (Tosa) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_HAVE_BOARD_IRQS -config ARCH_VIPER - bool "Arcom/Eurotech VIPER SBC" - select PXA25x - select ISA - select I2C_GPIO +config MACH_CM_X300 + bool "CompuLab CM-X300 modules" + select PXA3xx + select CPU_PXA300 + select CPU_PXA310 select HAVE_PWM - select PXA_HAVE_BOARD_IRQS - select PXA_HAVE_ISA_IRQS -config ARCH_PXA_ESERIES - bool "PXA based Toshiba e-series PDAs" +config ARCH_GUMSTIX + bool "Gumstix XScale 255 boards" select PXA25x - select PXA_HAVE_BOARD_IRQS - -config MACH_E330 - bool "Toshiba e330" - default y - depends on ARCH_PXA_ESERIES help - Say Y here if you intend to run this kernel on a Toshiba - e330 family PDA. + Say Y here if you intend to run this kernel on + Basix, Connex, ws-200ax, ws-400ax systems -config MACH_E350 - bool "Toshiba e350" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e350 family PDA. +choice + prompt "Gumstix Carrier/Expansion Board" + depends on ARCH_GUMSTIX -config MACH_E740 - bool "Toshiba e740" - default y - depends on ARCH_PXA_ESERIES - select FB_W100 - help - Say Y here if you intend to run this kernel on a Toshiba - e740 family PDA. +config GUMSTIX_AM200EPD + bool "Enable AM200EPD board support" -config MACH_E750 - bool "Toshiba e750" - default y - depends on ARCH_PXA_ESERIES - select FB_W100 - help - Say Y here if you intend to run this kernel on a Toshiba - e750 family PDA. +config GUMSTIX_AM300EPD + bool "Enable AM300EPD board support" -config MACH_E400 - bool "Toshiba e400" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e400 family PDA. +endchoice -config MACH_E800 - bool "Toshiba e800" - default y - depends on ARCH_PXA_ESERIES - select FB_W100 +config MACH_INTELMOTE2 + bool "Intel Mote 2 Platform" + select PXA27x + select IWMMXT + select PXA_HAVE_BOARD_IRQS + +config MACH_STARGATE2 + bool "Intel Stargate 2 Platform" + select PXA27x + select IWMMXT + select PXA_HAVE_BOARD_IRQS + +config MACH_XCEP + bool "Iskratel Electronics XCEP" + select PXA25x + select MTD + select MTD_PARTITIONS + select MTD_PHYSMAP + select MTD_CFI_INTELEXT + select MTD_CFI + select MTD_CHAR + select SMC91X + select PXA_SSP help - Say Y here if you intend to run this kernel on a Toshiba - e800 family PDA. + PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. + Tuned for usage in Libera instruments for particle accelerators. config TRIZEPS_PXA bool "PXA based Keith und Koep Trizeps DIMM-Modules" -config MACH_H5000 - bool "HP iPAQ h5000" - select PXA25x - config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" depends on TRIZEPS_PXA @@ -269,18 +192,48 @@ config MACH_TRIZEPS_ANY endchoice +config ARCOM_PCMCIA + bool + help + Generic option for Arcom Viper/Zeus PCMCIA + config TRIZEPS_PCMCIA bool help Enable PCMCIA support for Trizeps modules -config MACH_EM_X270 - bool "CompuLab EM-x270 platform" +config MACH_LOGICPD_PXA270 + bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS -config MACH_EXEDA - bool "CompuLab eXeda platform" +config MACH_PCM027 + bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x + select IWMMXT + select PXA_SSP + select PXA_HAVE_BOARD_IRQS + +config MACH_PCM990_BASEBOARD + bool "PHYTEC PCM-990 development board" + select HAVE_PWM + depends on MACH_PCM027 + +choice + prompt "display on pcm990" + depends on MACH_PCM990_BASEBOARD + +config PCM990_DISPLAY_SHARP + bool "sharp lq084v1dg21 stn display" + +config PCM990_DISPLAY_NEC + bool "nec nl6448bc20_18d tft display" + +config PCM990_DISPLAY_NONE + bool "no display" + +endchoice config MACH_COLIBRI bool "Toradex Colibri PXA270" @@ -290,45 +243,14 @@ config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" select PXA3xx select CPU_PXA300 + select CPU_PXA310 config MACH_COLIBRI320 bool "Toradex Colibri PXA320" select PXA3xx select CPU_PXA320 -config MACH_ZYLONITE - bool "PXA3xx Development Platform (aka Zylonite)" - select PXA3xx - select PXA_SSP - select HAVE_PWM - select PXA_HAVE_BOARD_IRQS - -config MACH_LITTLETON - bool "PXA3xx Form Factor Platform (aka Littleton)" - select PXA3xx - select PXA_SSP - -config MACH_TAVOREVB - bool "PXA930 Evaluation Board (aka TavorEVB)" - select PXA3xx - select CPU_PXA930 - -config MACH_SAAR - bool "PXA930 Handheld Platform (aka SAAR)" - select PXA3xx - select CPU_PXA930 - -config MACH_ARMCORE - bool "CompuLab CM-X255/CM-X270 modules" - select PXA27x - select IWMMXT - select PXA25x - select PXA_SSP - -config MACH_CM_X300 - bool "CompuLab CM-X300 modules" - select PXA3xx - select CPU_PXA300 +comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" @@ -338,6 +260,15 @@ config MACH_H4700 select HAVE_PWM select PXA_HAVE_BOARD_IRQS +config MACH_H5000 + bool "HP iPAQ h5000" + select PXA25x + +config MACH_HIMALAYA + bool "HTC Himalaya Support" + select CPU_PXA26x + select FB_W100 + config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x @@ -346,11 +277,6 @@ config MACH_MAGICIAN select HAVE_PWM select PXA_HAVE_BOARD_IRQS -config MACH_HIMALAYA - bool "HTC Himalaya Support" - select CPU_PXA26x - select FB_W100 - config MACH_MIOA701 bool "Mitac Mio A701 Support" select PXA27x @@ -362,13 +288,47 @@ config MACH_MIOA701 MIO A701. Currently there is only basic support for this PDA. -config MACH_PCM027 - bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" +config PXA_EZX + bool "Motorola EZX Platform" select PXA27x select IWMMXT - select PXA_SSP + select HAVE_PWM select PXA_HAVE_BOARD_IRQS +config MACH_EZX_A780 + bool "Motorola EZX A780" + default y + depends on PXA_EZX + +config MACH_EZX_E680 + bool "Motorola EZX E680" + default y + depends on PXA_EZX + +config MACH_EZX_A1200 + bool "Motorola EZX A1200" + default y + depends on PXA_EZX + +config MACH_EZX_A910 + bool "Motorola EZX A910" + default y + depends on PXA_EZX + +config MACH_EZX_E6 + bool "Motorola EZX E6" + default y + depends on PXA_EZX + +config MACH_EZX_E2 + bool "Motorola EZX E2" + default y + depends on PXA_EZX + +config MACH_MP900C + bool "Nec Mobilepro 900/c" + select PXA25x + config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM @@ -421,109 +381,172 @@ config MACH_PALMZ72 Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. -config MACH_TREO680 - bool "Palm Treo 680" +config MACH_PALMLD + bool "Palm LifeDrive" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help - Say Y here if you intend to run this kernel on Palm Treo 680 + Say Y here if you intend to run this kernel on a Palm LifeDrive + handheld computer. + +config PALM_TREO + bool + depends on ARCH_PXA_PALM + +config MACH_CENTRO + bool "Palm Centro 685 (GSM)" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + select PALM_TREO + help + Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) smartphone. -config MACH_PALMLD - bool "Palm LifeDrive" +config MACH_TREO680 + bool "Palm Treo 680" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT + select PALM_TREO help - Say Y here if you intend to run this kernel on a Palm LifeDrive + Say Y here if you intend to run this kernel on Palm Treo 680 + smartphone. + +config PXA_SHARPSL + bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" + select SHARP_SCOOP + select SHARP_PARAM + help + Say Y here if you intend to run this kernel on a + Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), + SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), + SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. -config MACH_PCM990_BASEBOARD - bool "PHYTEC PCM-990 development board" - select HAVE_PWM - depends on MACH_PCM027 +config SHARPSL_PM + bool + select APM_EMULATION -choice - prompt "display on pcm990" - depends on MACH_PCM990_BASEBOARD +config CORGI_SSP_DEPRECATED + bool + select PXA_SSP + help + This option will include corgi_ssp.c and corgi_lcd.c + that corgi_ts.c and other legacy drivers (corgi_bl.c + and sharpsl_pm.c) may depend on. -config PCM990_DISPLAY_SHARP - bool "sharp lq084v1dg21 stn display" +config MACH_POODLE + bool "Enable Sharp SL-5600 (Poodle) Support" + depends on PXA_SHARPSL + select PXA25x + select SHARP_LOCOMO + select PXA_SSP -config PCM990_DISPLAY_NEC - bool "nec nl6448bc20_18d tft display" +config MACH_CORGI + bool "Enable Sharp SL-C700 (Corgi) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx -config PCM990_DISPLAY_NONE - bool "no display" +config MACH_SHEPHERD + bool "Enable Sharp SL-C750 (Shepherd) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx -endchoice +config MACH_HUSKY + bool "Enable Sharp SL-C760 (Husky) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx -config MACH_CSB726 - bool "Enable Cogent CSB726 System On a Module" +config MACH_AKITA + bool "Enable Sharp SL-1000 (Akita) Support" + depends on PXA_SHARPSL select PXA27x - select IWMMXT - help - Say Y here if you intend to run this kernel on a Cogent - CSB726 System On Module. + select PXA_SHARP_Cxx00 + select MACH_SPITZ + select I2C + select I2C_PXA -config CSB726_CSB701 - bool "Enable supprot for CSB701 baseboard" - depends on MACH_CSB726 +config MACH_SPITZ + bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" + depends on PXA_SHARPSL + select PXA27x + select PXA_SHARP_Cxx00 -config PXA_EZX - bool "Motorola EZX Platform" +config MACH_BORZOI + bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" + depends on PXA_SHARPSL select PXA27x - select IWMMXT - select HAVE_PWM + select PXA_SHARP_Cxx00 + +config MACH_TOSA + bool "Enable Sharp SL-6000x (Tosa) Support" + depends on PXA_SHARPSL + select PXA25x select PXA_HAVE_BOARD_IRQS -config MACH_EZX_A780 - bool "Motorola EZX A780" - default y - depends on PXA_EZX +config ARCH_PXA_ESERIES + bool "PXA based Toshiba e-series PDAs" + select PXA25x + select PXA_HAVE_BOARD_IRQS -config MACH_EZX_E680 - bool "Motorola EZX E680" +config MACH_E330 + bool "Toshiba e330" default y - depends on PXA_EZX + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e330 family PDA. -config MACH_EZX_A1200 - bool "Motorola EZX A1200" +config MACH_E350 + bool "Toshiba e350" default y - depends on PXA_EZX + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e350 family PDA. -config MACH_EZX_A910 - bool "Motorola EZX A910" +config MACH_E740 + bool "Toshiba e740" default y - depends on PXA_EZX + depends on ARCH_PXA_ESERIES + select FB_W100 + help + Say Y here if you intend to run this kernel on a Toshiba + e740 family PDA. -config MACH_EZX_E6 - bool "Motorola EZX E6" +config MACH_E750 + bool "Toshiba e750" default y - depends on PXA_EZX + depends on ARCH_PXA_ESERIES + select FB_W100 + help + Say Y here if you intend to run this kernel on a Toshiba + e750 family PDA. -config MACH_EZX_E2 - bool "Motorola EZX E2" +config MACH_E400 + bool "Toshiba e400" default y - depends on PXA_EZX + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e400 family PDA. -config MACH_XCEP - bool "Iskratel Electronics XCEP" - select PXA25x - select MTD - select MTD_PARTITIONS - select MTD_PHYSMAP - select MTD_CFI_INTELEXT - select MTD_CFI - select MTD_CHAR - select SMC91X - select PXA_SSP +config MACH_E800 + bool "Toshiba e800" + default y + depends on ARCH_PXA_ESERIES + select FB_W100 help - PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. - Tuned for usage in Libera instruments for particle accelerators. + Say Y here if you intend to run this kernel on a Toshiba + e800 family PDA. endmenu @@ -551,6 +574,42 @@ config PXA3xx help Select code specific to PXA3xx variants +config CPU_PXA300 + bool + select PXA3xx + help + PXA300 (codename Monahans-L) + +config CPU_PXA310 + bool + select CPU_PXA300 + help + PXA310 (codename Monahans-LV) + +config CPU_PXA320 + bool + select PXA3xx + help + PXA320 (codename Monahans-P) + +config CPU_PXA930 + bool + select PXA3xx + help + PXA930 (codename Tavor-P) + +config CPU_PXA935 + bool + select CPU_PXA930 + help + PXA935 (codename Tavor-P65) + +config CPU_PXA950 + bool + select CPU_PXA930 + help + PXA950 (codename Tavor-PV2) + config PXA_SHARP_C7xx bool select PXA_SSP |