aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c29
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c3
-rw-r--r--arch/arm/mach-omap2/clock44xx_data.c1
-rw-r--r--arch/arm/mach-omap2/clockdomain.c30
-rw-r--r--arch/arm/mach-omap2/clockdomains44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/pm24xx.c4
-rw-r--r--arch/arm/mach-omap2/pm34xx.c4
-rw-r--r--arch/arm/mach-omap2/powerdomain2xxx_3xxx.c1
-rw-r--r--arch/arm/mach-omap2/serial.c4
-rw-r--r--arch/arm/mach-omap2/timer-gp.c10
10 files changed, 65 insertions, 23 deletions
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 5b0c77732df..8f9a64d650e 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {}
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
#define RTC_IO_GPIO (153)
#define RTC_WR_GPIO (154)
-#define RTC_RD_GPIO (160)
+#define RTC_RD_GPIO (53)
#define RTC_CS_GPIO (163)
+#define RTC_CS_EN_GPIO (160)
struct v3020_platform_data cm_t3517_v3020_pdata = {
.use_gpio = 1,
@@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = {
static void __init cm_t3517_init_rtc(void)
{
+ int err;
+
+ err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en");
+ if (err) {
+ pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
+ return;
+ }
+
+ gpio_direction_output(RTC_CS_EN_GPIO, 1);
+
platform_device_register(&cm_t3517_rtc_device);
}
#else
@@ -214,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
},
{
.name = "linux",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */
.size = 32 * NAND_BLOCK_SIZE,
},
{
.name = "rootfs",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */
.size = MTDPART_SIZ_FULL,
},
};
@@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void)
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- /* RTC GPIOs: IO, WR#, RD#, CS# */
+
+ /* RTC GPIOs: */
+ /* IO - GPIO153 */
OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+ /* WR# - GPIO154 */
OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+ /* RD# - GPIO53 */
+ OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+ /* CS# - GPIO163 */
OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+ /* CS EN - GPIO160 */
+ OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
/* HSUSB1 RESET */
OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* HSUSB2 RESET */
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 00bb1fc5e01..e906e05bb41 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -275,8 +275,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
- .pullups = BIT(1),
- .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+ .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(15) | BIT(16) | BIT(17),
.setup = devkit8000_twl_gpio_setup,
};
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index e8cb32fd7f1..de9ec8ddd2a 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -34,7 +34,6 @@
#include "cm2_44xx.h"
#include "cm-regbits-44xx.h"
#include "prm44xx.h"
-#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "control.h"
#include "scrm44xx.h"
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index e20b98636ab..58e42f76603 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -423,6 +423,12 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
+ if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+ clkdm1->name, clkdm2->name, __func__);
+ return -EINVAL;
+ }
+
if (!clkdm1 || !clkdm2)
return -EINVAL;
@@ -458,6 +464,12 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
+ if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+ clkdm1->name, clkdm2->name, __func__);
+ return -EINVAL;
+ }
+
if (!clkdm1 || !clkdm2)
return -EINVAL;
@@ -500,6 +512,12 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
if (!clkdm1 || !clkdm2)
return -EINVAL;
+ if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+ clkdm1->name, clkdm2->name, __func__);
+ return -EINVAL;
+ }
+
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
if (IS_ERR(cd)) {
pr_debug("clockdomain: hardware cannot set/clear wake up of "
@@ -527,6 +545,12 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
struct clkdm_dep *cd;
u32 mask = 0;
+ if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ pr_err("clockdomain: %s: %s: not yet implemented\n",
+ clkdm->name, __func__);
+ return -EINVAL;
+ }
+
if (!clkdm)
return -EINVAL;
@@ -830,8 +854,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
* dependency code and data for OMAP4.
*/
if (cpu_is_omap44xx()) {
- WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
- "support is not yet implemented\n");
+ pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
} else {
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_add_autodeps(clkdm);
@@ -872,8 +895,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
* dependency code and data for OMAP4.
*/
if (cpu_is_omap44xx()) {
- WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
- "support is not yet implemented\n");
+ pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
} else {
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index 51920fc7fc5..10622c914ab 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -30,8 +30,6 @@
#include "cm1_44xx.h"
#include "cm2_44xx.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
#include "cm-regbits-44xx.h"
#include "prm44xx.h"
#include "prcm44xx.h"
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 9e5dc8ed51e..97feb3ab6a6 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void)
/* Block console output in case it is on one of the OMAP UARTs */
if (!is_suspending())
- if (try_acquire_console_sem())
+ if (!console_trylock())
goto no_sleep;
omap_uart_prepare_idle(0);
@@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void)
omap_uart_resume_idle(0);
if (!is_suspending())
- release_console_sem();
+ console_unlock();
no_sleep:
if (omap2_pm_debug) {
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 8cbbeade4b8..a4aa1920a75 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -398,7 +398,7 @@ void omap_sram_idle(void)
if (!is_suspending())
if (per_next_state < PWRDM_POWER_ON ||
core_next_state < PWRDM_POWER_ON)
- if (try_acquire_console_sem())
+ if (!console_trylock())
goto console_still_active;
/* PER */
@@ -481,7 +481,7 @@ void omap_sram_idle(void)
}
if (!is_suspending())
- release_console_sem();
+ console_unlock();
console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index d5233890370..cf600e22bf8 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -19,7 +19,6 @@
#include <plat/prcm.h>
#include "powerdomain.h"
-#include "prm-regbits-34xx.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 302da7403a1..32e91a9c8b6 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
oh->dev_attr = uart;
- acquire_console_sem(); /* in case the earlycon is on the UART */
+ console_lock(); /* in case the earlycon is on the UART */
/*
* Because of early UART probing, UART did not get idled
@@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
omap_uart_block_sleep(uart);
uart->timeout = DEFAULT_TIMEOUT;
- release_console_sem();
+ console_unlock();
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 4e48e786bec..7b7c2683ae7 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -42,6 +42,8 @@
#include "timer-gp.h"
+#include <plat/common.h>
+
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
@@ -176,10 +178,14 @@ static void __init omap2_gp_clockevent_init(void)
/*
* When 32k-timer is enabled, don't use GPTimer for clocksource
* instead, just leave default clocksource which uses the 32k
- * sync counter. See clocksource setup in see plat-omap/common.c.
+ * sync counter. See clocksource setup in plat-omap/counter_32k.c
*/
-static inline void __init omap2_gp_clocksource_init(void) {}
+static void __init omap2_gp_clocksource_init(void)
+{
+ omap_init_clocksource_32k();
+}
+
#else
/*
* clocksource
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-19 04:58:54 +0000