diff options
Diffstat (limited to 'arch/arm/mach-omap2')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3stalker.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 17 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock44xx_data.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/usb-ehci.c | 2 |
6 files changed, 27 insertions, 11 deletions
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index f848ba8dbc1..a04cffd691c 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -538,9 +538,7 @@ static void ads7846_dev_init(void) printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); gpio_direction_input(OMAP3_STALKER_TS_GPIO); - - omap_set_gpio_debounce(OMAP3_STALKER_TS_GPIO, 1); - omap_set_gpio_debounce_time(OMAP3_STALKER_TS_GPIO, 0xa); + gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index abdf321c2d4..c5555ca13d0 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -175,6 +175,10 @@ static void __init rx51_add_gpio_keys(void) #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ static int board_keymap[] = { + /* + * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row + * connected to the ground" matrix state. + */ KEY(0, 0, KEY_Q), KEY(0, 1, KEY_O), KEY(0, 2, KEY_P), @@ -182,6 +186,7 @@ static int board_keymap[] = { KEY(0, 4, KEY_BACKSPACE), KEY(0, 6, KEY_A), KEY(0, 7, KEY_S), + KEY(1, 0, KEY_W), KEY(1, 1, KEY_D), KEY(1, 2, KEY_F), @@ -190,6 +195,7 @@ static int board_keymap[] = { KEY(1, 5, KEY_J), KEY(1, 6, KEY_K), KEY(1, 7, KEY_L), + KEY(2, 0, KEY_E), KEY(2, 1, KEY_DOT), KEY(2, 2, KEY_UP), @@ -197,6 +203,8 @@ static int board_keymap[] = { KEY(2, 5, KEY_Z), KEY(2, 6, KEY_X), KEY(2, 7, KEY_C), + KEY(2, 8, KEY_F9), + KEY(3, 0, KEY_R), KEY(3, 1, KEY_V), KEY(3, 2, KEY_B), @@ -205,20 +213,23 @@ static int board_keymap[] = { KEY(3, 5, KEY_SPACE), KEY(3, 6, KEY_SPACE), KEY(3, 7, KEY_LEFT), + KEY(4, 0, KEY_T), KEY(4, 1, KEY_DOWN), KEY(4, 2, KEY_RIGHT), KEY(4, 4, KEY_LEFTCTRL), KEY(4, 5, KEY_RIGHTALT), KEY(4, 6, KEY_LEFTSHIFT), + KEY(4, 8, KEY_10), + KEY(5, 0, KEY_Y), + KEY(5, 8, KEY_11), + KEY(6, 0, KEY_U), + KEY(7, 0, KEY_I), KEY(7, 1, KEY_F7), KEY(7, 2, KEY_F8), - KEY(0xff, 2, KEY_F9), - KEY(0xff, 4, KEY_F10), - KEY(0xff, 5, KEY_F11), }; static struct matrix_keymap_data board_map_data = { diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 02804224517..e10db7a90cb 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -1369,6 +1369,7 @@ static struct clk emif1_ick = { .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .flags = ENABLE_ON_INIT, .clkdm_name = "l3_emif_clkdm", .parent = &ddrphy_ck, .recalc = &followparent_recalc, @@ -1379,6 +1380,7 @@ static struct clk emif2_ick = { .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .flags = ENABLE_ON_INIT, .clkdm_name = "l3_emif_clkdm", .parent = &ddrphy_ck, .recalc = &followparent_recalc, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 95c9a5f774e..b7a4133267d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -409,10 +409,11 @@ static int _init_main_clk(struct omap_hwmod *oh) return 0; oh->_clk = omap_clk_get_by_name(oh->main_clk); - if (!oh->_clk) + if (!oh->_clk) { pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n", oh->name, oh->main_clk); return -EINVAL; + } if (!oh->_clk->clkdm) pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n", @@ -444,10 +445,11 @@ static int _init_interface_clks(struct omap_hwmod *oh) continue; c = omap_clk_get_by_name(os->clk); - if (!c) + if (!c) { pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n", oh->name, os->clk); ret = -EINVAL; + } os->_clk = c; } @@ -470,10 +472,11 @@ static int _init_opt_clks(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) { c = omap_clk_get_by_name(oc->clk); - if (!c) + if (!c) { pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n", oh->name, oc->clk); ret = -EINVAL; + } oc->_clk = c; } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2e967716cc3..b88737fd6cf 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -99,7 +99,7 @@ static void omap3_enable_io_chain(void) /* Do a readback to assure write has been done */ prm_read_mod_reg(WKUP_MOD, PM_WKEN); - while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) & + while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) & OMAP3430_ST_IO_CHAIN_MASK)) { timeout++; if (timeout > 1000) { @@ -108,7 +108,7 @@ static void omap3_enable_io_chain(void) return; } prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, - WKUP_MOD, PM_WKST); + WKUP_MOD, PM_WKEN); } } } diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c index c68f799e83c..d72d1ac3033 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -20,6 +20,8 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/dma-mapping.h> + #include <asm/io.h> #include <plat/mux.h> |