diff options
Diffstat (limited to 'arch/arm/mach-omap2')
28 files changed, 234 insertions, 88 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 2069fb33baa..4b9fc57770d 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -22,6 +22,9 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o # SMP support ONLY available for OMAP4 obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o +obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o + +AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a # Functions loaded to SRAM obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index a101029ceb6..5822bcf7b15 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -648,7 +648,7 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 4386d2b4a78..a0a2a113465 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -54,7 +54,7 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 180ac112e52..b88f28c5814 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -50,33 +50,9 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = { }; #ifdef CONFIG_CACHE_L2X0 -noinline void omap_smc1(u32 fn, u32 arg) -{ - register u32 r12 asm("r12") = fn; - register u32 r0 asm("r0") = arg; - - /* This is common routine cache secure monitor API used to - * modify the PL310 secure registers. - * r0 contains the value to be modified and "r12" contains - * the monitor API number. It uses few CPU registers - * internally and hence they need be backed up including - * link register "lr". - * Explicitly save r11 and r12 the compiler generated code - * won't save it. - */ - asm volatile( - "stmfd r13!, {r11,r12}\n" - "dsb\n" - "smc\n" - "ldmfd r13!, {r11,r12}\n" - : "+r" (r0), "+r" (r12) - : - : "r4", "r5", "r10", "lr", "cc"); -} -EXPORT_SYMBOL(omap_smc1); - static int __init omap_l2_cache_init(void) { + extern void omap_smc1(u32 fn, u32 arg); void __iomem *l2cache_base; /* To avoid code running on other OMAPs in diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 70c18614773..6ae880585d5 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -273,7 +273,7 @@ static void __init am3517_evm_init_irq(void) omap_gpio_init(); } -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index afa77caaff4..2de4f79f03a 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -612,7 +612,7 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct ehci_hcd_omap_platform_data ehci_pdata = { +static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 371019054b4..5bfc13b3176 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -636,7 +636,7 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 9958987a3d0..3c7789d4505 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -16,7 +16,6 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/gpio.h> -#include <linux/leds.h> #include <linux/interrupt.h> #include <linux/regulator/machine.h> @@ -39,8 +38,8 @@ #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 #define IGEP2_GPIO_USBH_NRESET 24 -#define IGEP2_GPIO_LED0_RED 26 -#define IGEP2_GPIO_LED0_GREEN 27 +#define IGEP2_GPIO_LED0_GREEN 26 +#define IGEP2_GPIO_LED0_RED 27 #define IGEP2_GPIO_LED1_RED 28 #define IGEP2_GPIO_DVI_PUP 170 #define IGEP2_GPIO_WIFI_NPD 94 @@ -355,34 +354,50 @@ static void __init igep2_display_init(void) gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1)) pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); } -#ifdef CONFIG_LEDS_TRIGGERS -static struct gpio_led gpio_leds[] = { + +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +#include <linux/leds.h> + +static struct gpio_led igep2_gpio_leds[] = { { - .name = "GPIO_LED1_RED", + .name = "led0:red", + .gpio = IGEP2_GPIO_LED0_RED, + }, + { + .name = "led0:green", .default_trigger = "heartbeat", + .gpio = IGEP2_GPIO_LED0_GREEN, + }, + { + .name = "led1:red", .gpio = IGEP2_GPIO_LED1_RED, }, }; -static struct gpio_led_platform_data gpio_leds_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), +static struct gpio_led_platform_data igep2_led_pdata = { + .leds = igep2_gpio_leds, + .num_leds = ARRAY_SIZE(igep2_gpio_leds), }; -static struct platform_device leds_gpio = { +static struct platform_device igep2_led_device = { .name = "leds-gpio", .id = -1, .dev = { - .platform_data = &gpio_leds_info, + .platform_data = &igep2_led_pdata, }, }; + +static void __init igep2_init_led(void) +{ + platform_device_register(&igep2_led_device); +} + +#else +static inline void igep2_init_led(void) {} #endif static struct platform_device *igep2_devices[] __initdata = { &igep2_dss_device, -#ifdef CONFIG_LEDS_TRIGGERS - &leds_gpio, -#endif }; static void __init igep2_init_irq(void) @@ -442,7 +457,7 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, @@ -471,31 +486,34 @@ static void __init igep2_init(void) usb_ehci_init(&ehci_pdata); igep2_flash_init(); + igep2_init_led(); igep2_display_init(); igep2_init_smsc911x(); /* GPIO userspace leds */ - if ((gpio_request(IGEP2_GPIO_LED0_RED, "GPIO_LED0_RED") == 0) && +#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) + if ((gpio_request(IGEP2_GPIO_LED0_RED, "led0:red") == 0) && (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) { gpio_export(IGEP2_GPIO_LED0_RED, 0); gpio_set_value(IGEP2_GPIO_LED0_RED, 0); } else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n"); - if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "GPIO_LED0_GREEN") == 0) && + if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "led0:green") == 0) && (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) { gpio_export(IGEP2_GPIO_LED0_GREEN, 0); gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0); } else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); -#ifndef CONFIG_LEDS_TRIGGERS - if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) && + + if ((gpio_request(IGEP2_GPIO_LED1_RED, "led1:red") == 0) && (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) { gpio_export(IGEP2_GPIO_LED1_RED, 0); gpio_set_value(IGEP2_GPIO_LED1_RED, 0); } else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); #endif + /* GPIO W-LAN + Bluetooth combo module */ if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) { diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 4cab0522d7c..da9bcb89899 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -37,6 +37,103 @@ static int slot1_cover_open; static int slot2_cover_open; static struct device *mmc_device; +#define TUSB6010_ASYNC_CS 1 +#define TUSB6010_SYNC_CS 4 +#define TUSB6010_GPIO_INT 58 +#define TUSB6010_GPIO_ENABLE 0 +#define TUSB6010_DMACHAN 0x3f + +#if defined(CONFIG_USB_TUSB6010) || \ + defined(CONFIG_USB_TUSB6010_MODULE) +/* + * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and + * 1.5 V voltage regulators of PM companion chip. Companion chip will then + * provide then PGOOD signal to TUSB6010 which will release it from reset. + */ +static int tusb_set_power(int state) +{ + int i, retval = 0; + + if (state) { + gpio_set_value(TUSB6010_GPIO_ENABLE, 1); + msleep(1); + + /* Wait until TUSB6010 pulls INT pin down */ + i = 100; + while (i && gpio_get_value(TUSB6010_GPIO_INT)) { + msleep(1); + i--; + } + + if (!i) { + printk(KERN_ERR "tusb: powerup failed\n"); + retval = -ENODEV; + } + } else { + gpio_set_value(TUSB6010_GPIO_ENABLE, 0); + msleep(10); + } + + return retval; +} + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +static struct musb_hdrc_platform_data tusb_data = { +#if defined(CONFIG_USB_MUSB_OTG) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_PERIPHERAL) + .mode = MUSB_PERIPHERAL, +#else /* defined(CONFIG_USB_MUSB_HOST) */ + .mode = MUSB_HOST, +#endif + .set_power = tusb_set_power, + .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */ + .power = 100, /* Max 100 mA VBUS for host mode */ + .config = &musb_config, +}; + +static void __init n8x0_usb_init(void) +{ + int ret = 0; + static char announce[] __initdata = KERN_INFO "TUSB 6010\n"; + + /* PM companion chip power control pin */ + ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable"); + if (ret != 0) { + printk(KERN_ERR "Could not get TUSB power GPIO%i\n", + TUSB6010_GPIO_ENABLE); + return; + } + gpio_direction_output(TUSB6010_GPIO_ENABLE, 0); + + tusb_set_power(0); + + ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, + TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS, + TUSB6010_GPIO_INT, TUSB6010_DMACHAN); + if (ret != 0) + goto err; + + printk(announce); + + return; + +err: + gpio_free(TUSB6010_GPIO_ENABLE); +} +#else + +static void __init n8x0_usb_init(void) {} + +#endif /*CONFIG_USB_TUSB6010 */ + + static struct omap2_mcspi_device_config p54spi_mcspi_config = { .turbo_mode = 0, .single_channel = 1, @@ -562,6 +659,7 @@ static void __init n8x0_init_machine(void) n8x0_menelaus_init(); n8x0_onenand_init(); n8x0_mmc_init(); + n8x0_usb_init(); } MACHINE_START(NOKIA_N800, "Nokia N800") diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6eb77e1f7c8..962d377970e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -410,7 +410,7 @@ static void __init omap3beagle_flash_init(void) } } -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index d6bc88c426b..017bb2f4f7d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -635,7 +635,7 @@ static struct platform_device *omap3_evm_devices[] __initdata = { &omap3_evm_dss_device, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 4827f4658df..395d049bf01 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -459,12 +459,20 @@ static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { }, }; +static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { + { + I2C_BOARD_INFO("bq27500", 0x55), + .flags = I2C_CLIENT_WAKE, + }, +}; + static int __init omap3pandora_i2c_init(void) { omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, ARRAY_SIZE(omap3pandora_i2c_boardinfo)); /* i2c2 pins are not connected */ - omap_register_i2c_bus(3, 100, NULL, 0); + omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo, + ARRAY_SIZE(omap3pandora_i2c3_boardinfo)); return 0; } @@ -537,7 +545,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_dss_device, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 3943d0f8322..2504d41f923 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -493,7 +493,7 @@ static void __init omap3touchbook_flash_init(void) } } -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, @@ -518,14 +518,14 @@ static void omap3_touchbook_poweroff(void) gpio_direction_output(TB_KILL_POWER_GPIO, 0); } -static void __init early_touchbook_revision(char **p) +static int __init early_touchbook_revision(char *p) { - if (!*p) - return; + if (!p) + return 0; - strict_strtoul(*p, 10, &touchbook_revision); + return strict_strtoul(p, 10, &touchbook_revision); } -__early_param("tbr=", early_touchbook_revision); +early_param("tbr", early_touchbook_revision); static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_ULPI, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 50872a42bec..8848c7c5ce4 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -394,7 +394,7 @@ static struct platform_device *overo_devices[] __initdata = { &overo_lcd_device, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index d3e3cd5170d..cd3e40cf3ac 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -52,7 +52,7 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 3b1eac4d539..e60ca4e47bb 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -31,6 +31,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/cpufreq.h> +#include <linux/slab.h> #include <plat/clock.h> #include <plat/sram.h> diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index f12af95ead4..d932b142d0b 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1841,6 +1841,7 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "aes_ick", &aes_ick, CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), + CLK("musb_hdrc", "fck", &osc_ck, CK_242X), }; /* diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 402e8f0d0f2..87f676acf61 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -237,7 +237,7 @@ static void __init _omap2_map_common_io(void) } #ifdef CONFIG_ARCH_OMAP2420 -void __init omap242x_map_common_io() +void __init omap242x_map_common_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); @@ -246,7 +246,7 @@ void __init omap242x_map_common_io() #endif #ifdef CONFIG_ARCH_OMAP2430 -void __init omap243x_map_common_io() +void __init omap243x_map_common_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); @@ -255,7 +255,7 @@ void __init omap243x_map_common_io() #endif #ifdef CONFIG_ARCH_OMAP3 -void __init omap34xx_map_common_io() +void __init omap34xx_map_common_io(void) { iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); _omap2_map_common_io(); @@ -263,7 +263,7 @@ void __init omap34xx_map_common_io() #endif #ifdef CONFIG_ARCH_OMAP4 -void __init omap44xx_map_common_io() +void __init omap44xx_map_common_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); _omap2_map_common_io(); @@ -309,7 +309,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, { pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_autodeps); -#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ if (cpu_is_omap242x()) omap2420_hwmod_init(); else if (cpu_is_omap243x()) @@ -319,7 +318,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, omap2_mux_init(); /* The OPP tables have to be registered before a clk init */ omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps); -#endif if (cpu_is_omap2420()) omap2420_clk_init(); @@ -333,11 +331,12 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, pr_err("Could not init clock framework - unknown CPU\n"); omap_serial_early_init(); -#ifndef CONFIG_ARCH_OMAP4 - omap_hwmod_late_init(); + if (cpu_is_omap24xx() || cpu_is_omap34xx()) /* FIXME: OMAP4 */ + omap_hwmod_late_init(); omap_pm_if_init(); - omap2_sdrc_init(sdrc_cs0, sdrc_cs1); - _omap2_init_reprogram_sdrc(); -#endif + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + omap2_sdrc_init(sdrc_cs0, sdrc_cs1); + _omap2_init_reprogram_sdrc(); + } gpmc_init(); } diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index 6f4b7cc8f4d..4f63dc6859a 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -15,6 +15,7 @@ #include <linux/device.h> #include <linux/jiffies.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/stringify.h> #include <plat/iommu.h> diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 52a981cb8fd..318f3638653 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -430,19 +430,19 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) if (unlikely(!res)) { dev_err(&pdev->dev, "invalid irq resource\n"); ret = -ENODEV; - goto err_iva1; + omap_mbox_unregister(&mbox_dsp_info); + goto err_dsp; } mbox_iva_info.irq = res->start; ret = omap_mbox_register(&pdev->dev, &mbox_iva_info); - if (ret) - goto err_iva1; + if (ret) { + omap_mbox_unregister(&mbox_dsp_info); + goto err_dsp; + } } #endif return 0; -err_iva1: - omap_mbox_unregister(&mbox_dsp_info); - err_dsp: iounmap(mbox_base); return ret; diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index be8fce395a5..2f3cad6f940 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -16,6 +16,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <mach/irqs.h> #include <plat/dma.h> diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index b4ca84ee0a9..8b3d26935a3 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/list.h> #include <linux/ctype.h> diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S new file mode 100644 index 00000000000..89bb2b14147 --- /dev/null +++ b/arch/arm/mach-omap2/omap44xx-smc.S @@ -0,0 +1,32 @@ +/* + * OMAP44xx secure APIs file. + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Written by Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + +/* + * This is common routine to manage secure monitor API + * used to modify the PL310 secure registers. + * 'r0' contains the value to be modified and 'r12' contains + * the monitor API number. It uses few CPU registers + * internally and hence they need be backed up including + * link register "lr". + * Function signature : void omap_smc1(u32 fn, u32 arg) + */ + +ENTRY(omap_smc1) + stmfd sp!, {r2-r12, lr} + mov r12, r0 + mov r0, r1 + dsb + smc + ldmfd sp!, {r2-r12, pc} +END(omap_smc1) diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index c18f7f2f19b..6cac9817c24 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/slab.h> #include <plat/clock.h> #include <plat/board.h> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index fee2efb172e..ea0000bc535 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -27,6 +27,7 @@ #include <linux/gpio.h> #include <linux/clk.h> #include <linux/delay.h> +#include <linux/slab.h> #include <plat/sram.h> #include <plat/clockdomain.h> diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 81872aacb80..9537f6f2352 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -133,7 +133,7 @@ u32 omap_prcm_get_reset_sources(void) EXPORT_SYMBOL(omap_prcm_get_reset_sources); /* Resets clock rates and reboots the system. Only called from system.h */ -void omap_prcm_arch_reset(char mode) +void omap_prcm_arch_reset(char mode, const char *cmd) { s16 prcm_offs = 0; @@ -145,7 +145,7 @@ void omap_prcm_arch_reset(char mode) u32 l; prcm_offs = OMAP3430_GR_MOD; - l = ('B' << 24) | ('M' << 16) | mode; + l = ('B' << 24) | ('M' << 16) | (cmd ? (u8)*cmd : 0); /* Reserve the first word in scratchpad for communicating * with the boot ROM. A pointer to a data structure * describing the boot process can be stored there, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index b79bc8926cc..da77930480e 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -644,16 +644,21 @@ static void serial_out_override(struct uart_port *up, int offset, int value) } void __init omap_serial_early_init(void) { - int i; + int i, nr_ports; char name[16]; + if (!(cpu_is_omap3630() || cpu_is_omap4430())) + nr_ports = 3; + else + nr_ports = ARRAY_SIZE(omap_uart); + /* * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on * if not needed. */ - for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { + for (i = 0; i < nr_ports; i++) { struct omap_uart_state *uart = &omap_uart[i]; struct platform_device *pdev = &uart->pdev; struct device *dev = &pdev->dev; @@ -669,17 +674,17 @@ void __init omap_serial_early_init(void) continue; } - sprintf(name, "uart%d_ick", i+1); + sprintf(name, "uart%d_ick", i + 1); uart->ick = clk_get(NULL, name); if (IS_ERR(uart->ick)) { - printk(KERN_ERR "Could not get uart%d_ick\n", i+1); + printk(KERN_ERR "Could not get uart%d_ick\n", i + 1); uart->ick = NULL; } sprintf(name, "uart%d_fck", i+1); uart->fck = clk_get(NULL, name); if (IS_ERR(uart->fck)) { - printk(KERN_ERR "Could not get uart%d_fck\n", i+1); + printk(KERN_ERR "Could not get uart%d_fck\n", i + 1); uart->fck = NULL; } diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c index f1df873d59d..ee9f548d5d8 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -70,7 +70,7 @@ static struct platform_device ehci_device = { /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST */ -static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) +static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) { switch (port_mode[0]) { case EHCI_HCD_OMAP_MODE_PHY: @@ -213,7 +213,7 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) return; } -void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) +void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) { platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); @@ -229,7 +229,7 @@ void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) #else -void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) +void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) { } |