aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c3
-rw-r--r--arch/arm/mach-omap2/board-zoom-peripherals.c2
-rw-r--r--arch/arm/mach-omap2/include/mach/entry-macro.S93
-rw-r--r--arch/arm/mach-omap2/include/mach/omap4-common.h1
-rw-r--r--arch/arm/mach-omap2/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-omap2/io.c2
-rw-r--r--arch/arm/mach-omap2/omap-smp.c2
-rw-r--r--arch/arm/mach-omap2/omap4-common.c11
-rw-r--r--arch/arm/mach-omap2/pm-debug.c34
-rw-r--r--arch/arm/mach-omap2/pm24xx.c35
-rw-r--r--arch/arm/mach-omap2/pm34xx.c27
-rw-r--r--arch/arm/mach-omap2/prcm-common.h11
-rw-r--r--arch/arm/mach-omap2/serial.c7
13 files changed, 131 insertions, 99 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f4379c87..53ac762518b 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- devkit8000_vmmc1_supply.dev = mmc[0].dev;
-
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 86c9b210295..9db9203667d 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "wl1271",
.mmc = 3,
- .caps = MMC_CAP_4_BIT_DATA,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index 06e64e1fc28..d54c4f89a8b 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -105,6 +105,35 @@ omap_irq_base: .word 0
9999:
.endm
+#ifdef CONFIG_SMP
+ /* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt
+ * on the controller, since this requires the original irqstat
+ * value which we won't easily be able to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ it cc
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ it cs
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* As above, this assumes that irqstat and base are preserved */
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ mov \tmp, #0
+ cmp \irqnr, #29
+ itt eq
+ moveq \tmp, #1
+ streq \irqstat, [\base, #GIC_CPU_EOI]
+ cmp \tmp, #0
+ .endm
+#endif /* CONFIG_SMP */
#else /* MULTI_OMAP2 */
@@ -141,74 +170,16 @@ omap_irq_base: .word 0
#ifdef CONFIG_ARCH_OMAP4
+#define HAVE_GET_IRQNR_PREAMBLE
+#include <asm/hardware/entry-macro-gic.S>
.macro get_irqnr_preamble, base, tmp
ldr \base, =OMAP4_IRQ_BASE
.endm
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * For now, we ignore all local interrupts so only return an
- * interrupt if it's between 30 and 1020. The test_for_ipi
- * routine below will pick up on IPIs.
- * A simple read from the controller will tell us the number
- * of the highest priority enabled interrupt.
- * We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #GIC_CPU_INTACK]
-
- ldr \tmp, =1021
-
- bic \irqnr, \irqstat, #0x1c00
-
- cmp \irqnr, #29
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
- .endm
#endif
-#endif /* MULTI_OMAP2 */
-
-#ifdef CONFIG_SMP
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt
- * on the controller, since this requires the original irqstat
- * value which we won't easily be able to recreate later.
- */
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- it cc
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- it cs
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- itt eq
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
-#endif /* CONFIG_SMP */
+#endif /* MULTI_OMAP2 */
.macro irq_prio_table
.endm
diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h
index 2744dfee1ff..5b0270b2893 100644
--- a/arch/arm/mach-omap2/include/mach/omap4-common.h
+++ b/arch/arm/mach-omap2/include/mach/omap4-common.h
@@ -24,7 +24,6 @@
extern void __iomem *l2cache_base;
#endif
-extern void __iomem *gic_cpu_base_addr;
extern void __iomem *gic_dist_base_addr;
extern void __init gic_init_irq(void);
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index 4da31e997ef..86631994776 100644
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xf8000000
+#define VMALLOC_END 0xf8000000UL
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 40562ddd3ee..a1939b1e6f8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -297,7 +297,7 @@ static int __init _omap2_init_reprogram_sdrc(void)
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
- if (!dpll3_m2_ck)
+ if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 9e9f70e18e3..9fbac2c3910 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -50,7 +50,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- gic_cpu_init(0, gic_cpu_base_addr);
+ gic_secondary_init(0);
/*
* Synchronise with the boot thread.
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 2f895553e6a..666e852988d 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -26,21 +26,22 @@
void __iomem *l2cache_base;
#endif
-void __iomem *gic_cpu_base_addr;
void __iomem *gic_dist_base_addr;
void __init gic_init_irq(void)
{
+ void __iomem *gic_cpu_base;
+
/* Static mapping, never released */
gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
BUG_ON(!gic_dist_base_addr);
- gic_dist_init(0, gic_dist_base_addr, 29);
/* Static mapping, never released */
- gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
- BUG_ON(!gic_cpu_base_addr);
- gic_cpu_init(0, gic_cpu_base_addr);
+ gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+ BUG_ON(!gic_cpu_base);
+
+ gic_init(0, 29, gic_dist_base_addr, gic_cpu_base);
}
#ifdef CONFIG_CACHE_L2X0
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 5e81517a7af..a8afb610c7d 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -161,6 +161,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+ u32 tick_rate, cycles;
+
+ if (!seconds && !milliseconds)
+ return;
+
+ tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+ cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+ omap_dm_timer_stop(gptimer_wakeup);
+ omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+ pr_info("PM: Resume timer in %u.%03u secs"
+ " (%d ticks at %d ticks/sec.)\n",
+ seconds, milliseconds, cycles, tick_rate);
+}
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -354,23 +371,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
pwrdm->timer = t;
}
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
- u32 tick_rate, cycles;
-
- if (!seconds && !milliseconds)
- return;
-
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
- cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
- omap_dm_timer_stop(gptimer_wakeup);
- omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
- pr_info("PM: Resume timer in %u.%03u secs"
- " (%d ticks at %d ticks/sec.)\n",
- seconds, milliseconds, cycles, tick_rate);
-}
-
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index a40457d8192..aaeea49b9bd 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -30,6 +30,7 @@
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
+#include <linux/console.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
@@ -52,6 +53,19 @@
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+ return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+ return false;
+}
+#endif
+
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
@@ -118,6 +132,11 @@ static void omap2_enter_full_retention(void)
if (omap_irq_pending())
goto no_sleep;
+ /* Block console output in case it is on one of the OMAP UARTs */
+ if (!is_suspending())
+ if (try_acquire_console_sem())
+ goto no_sleep;
+
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
omap_uart_prepare_idle(2);
@@ -131,6 +150,9 @@ static void omap2_enter_full_retention(void)
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
+ if (!is_suspending())
+ release_console_sem();
+
no_sleep:
if (omap2_pm_debug) {
unsigned long long tmp;
@@ -277,6 +299,12 @@ out:
local_irq_enable();
}
+static int omap2_pm_begin(suspend_state_t state)
+{
+ suspend_state = state;
+ return 0;
+}
+
static int omap2_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
@@ -326,10 +354,17 @@ static void omap2_pm_finish(void)
enable_hlt();
}
+static void omap2_pm_end(void)
+{
+ suspend_state = PM_SUSPEND_ON;
+}
+
static struct platform_suspend_ops omap_pm_ops = {
+ .begin = omap2_pm_begin,
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
+ .end = omap2_pm_end,
.valid = suspend_valid_only_mem,
};
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 75c0cd13ad8..648b8c50d02 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -28,6 +28,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/console.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
@@ -49,6 +50,19 @@
#include "sdrc.h"
#include "control.h"
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+ return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+ return false;
+}
+#endif
+
/* Scratchpad offsets */
#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
@@ -385,6 +399,13 @@ void omap_sram_idle(void)
omap3_enable_io_chain();
}
+ /* Block console output in case it is on one of the OMAP UARTs */
+ if (!is_suspending())
+ if (per_next_state < PWRDM_POWER_ON ||
+ core_next_state < PWRDM_POWER_ON)
+ if (try_acquire_console_sem())
+ goto console_still_active;
+
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(2);
@@ -463,6 +484,10 @@ void omap_sram_idle(void)
omap_uart_resume_idle(3);
}
+ if (!is_suspending())
+ release_console_sem();
+
+console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
@@ -504,8 +529,6 @@ out:
}
#ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state;
-
static int omap3_pm_prepare(void)
{
disable_hlt();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 298a22a754e..f81acee4738 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -243,13 +243,14 @@
#define OMAP24XX_EN_GPT1_MASK (1 << 0)
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2)
-#define OMAP24XX_ST_GPIOS_MASK 2
-#define OMAP24XX_ST_GPT1_SHIFT (1 << 0)
-#define OMAP24XX_ST_GPT1_MASK 0
+#define OMAP24XX_ST_GPIOS_SHIFT 2
+#define OMAP24XX_ST_GPIOS_MASK (1 << 2)
+#define OMAP24XX_ST_GPT1_SHIFT 0
+#define OMAP24XX_ST_GPT1_MASK (1 << 0)
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT (1 << 0)
+#define OMAP2430_ST_MDM_SHIFT 0
+#define OMAP2430_ST_MDM_MASK (1 << 0)
/* 3430 register bits shared between CM & PRM registers */
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index becf0e38ef7..d17960a1be2 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/serial_8250.h>
#include <linux/pm_runtime.h>
+#include <linux/console.h>
#ifdef CONFIG_SERIAL_OMAP
#include <plat/omap-serial.h>
@@ -406,7 +407,7 @@ void omap_uart_resume_idle(int num)
struct omap_uart_state *uart;
list_for_each_entry(uart, &uart_list, node) {
- if (num == uart->num) {
+ if (num == uart->num && uart->can_sleep) {
omap_uart_enable_clocks(uart);
/* Check for IO pad wakeup */
@@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port)
oh->dev_attr = uart;
+ acquire_console_sem(); /* in case the earlycon is on the UART */
+
/*
* Because of early UART probing, UART did not get idled
* on init. Now that omap_device is ready, ensure full idle
@@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port)
omap_uart_block_sleep(uart);
uart->timeout = DEFAULT_TIMEOUT;
+ release_console_sem();
+
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
device_init_wakeup(&od->pdev.dev, true);
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-20 19:06:25 +0000