aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-igep0020.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-igep0020.c')
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c718
1 files changed, 0 insertions, 718 deletions
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
deleted file mode 100644
index 06dbb2d3d38..00000000000
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/*
- * Copyright (C) 2009 Integration Software and Electronic Engineering.
- *
- * Modified from mach-omap2/board-generic.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/usb/phy.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/i2c/twl.h>
-#include <linux/mmc/host.h>
-
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "sdram-numonyx-m65kxxxxam.h"
-#include "common-board-devices.h"
-#include "board-flash.h"
-#include "control.h"
-#include "gpmc-onenand.h"
-
-#define IGEP2_SMSC911X_CS 5
-#define IGEP2_SMSC911X_GPIO 176
-#define IGEP2_GPIO_USBH_NRESET 24
-#define IGEP2_GPIO_LED0_GREEN 26
-#define IGEP2_GPIO_LED0_RED 27
-#define IGEP2_GPIO_LED1_RED 28
-#define IGEP2_GPIO_DVI_PUP 170
-
-#define IGEP2_RB_GPIO_WIFI_NPD 94
-#define IGEP2_RB_GPIO_WIFI_NRESET 95
-#define IGEP2_RB_GPIO_BT_NRESET 137
-#define IGEP2_RC_GPIO_WIFI_NPD 138
-#define IGEP2_RC_GPIO_WIFI_NRESET 139
-#define IGEP2_RC_GPIO_BT_NRESET 137
-
-#define IGEP3_GPIO_LED0_GREEN 54
-#define IGEP3_GPIO_LED0_RED 53
-#define IGEP3_GPIO_LED1_RED 16
-#define IGEP3_GPIO_USBH_NRESET 183
-
-#define IGEP_SYSBOOT_MASK 0x1f
-#define IGEP_SYSBOOT_NAND 0x0f
-#define IGEP_SYSBOOT_ONENAND 0x10
-
-/*
- * IGEP2 Hardware Revision Table
- *
- * --------------------------------------------------------------------------
- * | Id. | Hw Rev. | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET |
- * --------------------------------------------------------------------------
- * | 0 | B | high | gpio94 | gpio95 | - |
- * | 0 | B/C (B-compatible) | high | gpio94 | gpio95 | gpio137 |
- * | 1 | C | low | gpio138 | gpio139 | gpio137 |
- * --------------------------------------------------------------------------
- */
-
-#define IGEP2_BOARD_HWREV_B 0
-#define IGEP2_BOARD_HWREV_C 1
-#define IGEP3_BOARD_HWREV 2
-
-static u8 hwrev;
-
-static void __init igep2_get_revision(void)
-{
- u8 ret;
-
- if (machine_is_igep0030()) {
- hwrev = IGEP3_BOARD_HWREV;
- return;
- }
-
- omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
-
- if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) {
- pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
- pr_err("IGEP2: Unknown Hardware Revision\n");
- return;
- }
-
- ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
- if (ret == 0) {
- pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
- hwrev = IGEP2_BOARD_HWREV_C;
- } else if (ret == 1) {
- pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
- hwrev = IGEP2_BOARD_HWREV_B;
- } else {
- pr_err("IGEP2: Unknown Hardware Revision\n");
- hwrev = -1;
- }
-
- gpio_free(IGEP2_GPIO_LED1_RED);
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
- defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) || \
- defined(CONFIG_MTD_NAND_OMAP2) || \
- defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-
-#define ONENAND_MAP 0x20000000
-
-/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
- * Since the device is equipped with two DataRAMs, and two-plane NAND
- * Flash memory array, these two component enables simultaneous program
- * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
- * while Plane2 has only odd blocks such as block1, block3, block5.
- * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
- */
-
-static struct mtd_partition igep_flash_partitions[] = {
- {
- .name = "X-Loader",
- .offset = 0,
- .size = 2 * (64*(2*2048))
- },
- {
- .name = "U-Boot",
- .offset = MTDPART_OFS_APPEND,
- .size = 6 * (64*(2*2048)),
- },
- {
- .name = "Environment",
- .offset = MTDPART_OFS_APPEND,
- .size = 2 * (64*(2*2048)),
- },
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 12 * (64*(2*2048)),
- },
- {
- .name = "File System",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static inline u32 igep_get_sysboot_value(void)
-{
- return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
-}
-
-static void __init igep_flash_init(void)
-{
- u32 mux;
- mux = igep_get_sysboot_value();
-
- if (mux == IGEP_SYSBOOT_NAND) {
- pr_info("IGEP: initializing NAND memory device\n");
- board_nand_init(igep_flash_partitions,
- ARRAY_SIZE(igep_flash_partitions),
- 0, NAND_BUSWIDTH_16, nand_default_timings);
- } else if (mux == IGEP_SYSBOOT_ONENAND) {
- pr_info("IGEP: initializing OneNAND memory device\n");
- board_onenand_init(igep_flash_partitions,
- ARRAY_SIZE(igep_flash_partitions), 0);
- } else {
- pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
- }
-}
-
-#else
-static void __init igep_flash_init(void) {}
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
- .cs = IGEP2_SMSC911X_CS,
- .gpio_irq = IGEP2_SMSC911X_GPIO,
- .gpio_reset = -EINVAL,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static inline void __init igep2_init_smsc911x(void)
-{
- gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init igep2_init_smsc911x(void) { }
-#endif
-
-static struct regulator_consumer_supply igep_vmmc1_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data igep_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply),
- .consumer_supplies = igep_vmmc1_supply,
-};
-
-static struct regulator_consumer_supply igep_vio_supply[] = {
- REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
-};
-
-static struct regulator_init_data igep_vio = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(igep_vio_supply),
- .consumer_supplies = igep_vio_supply,
-};
-
-static struct regulator_consumer_supply igep_vmmc2_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_init_data igep_vmmc2 = {
- .constraints = {
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply),
- .consumer_supplies = igep_vmmc2_supply,
-};
-
-static struct fixed_voltage_config igep_vwlan = {
- .supply_name = "vwlan",
- .microvolts = 3300000,
- .gpio = -EINVAL,
- .enabled_at_boot = 1,
- .init_data = &igep_vmmc2,
-};
-
-static struct platform_device igep_vwlan_device = {
- .name = "reg-fixed-voltage",
- .id = 0,
- .dev = {
- .platform_data = &igep_vwlan,
- },
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .deferred = true,
- },
-#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
- {
- .mmc = 2,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- },
-#endif
- {} /* Terminator */
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led igep_gpio_leds[] = {
- [0] = {
- .name = "omap3:red:user0",
- .default_state = 0,
- },
- [1] = {
- .name = "omap3:green:boot",
- .default_state = 1,
- },
- [2] = {
- .name = "omap3:red:user1",
- .default_state = 0,
- },
- [3] = {
- .name = "omap3:green:user1",
- .default_state = 0,
- .gpio = -EINVAL, /* gets replaced */
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data igep_led_pdata = {
- .leds = igep_gpio_leds,
- .num_leds = ARRAY_SIZE(igep_gpio_leds),
-};
-
-static struct platform_device igep_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &igep_led_pdata,
- },
-};
-
-static void __init igep_leds_init(void)
-{
- if (machine_is_igep0020()) {
- igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
- igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
- igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
- } else {
- igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
- igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
- igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
- }
-
- platform_device_register(&igep_led_device);
-}
-
-#else
-static struct gpio igep_gpio_leds[] __initdata = {
- { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" },
- { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" },
- { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" },
-};
-
-static inline void igep_leds_init(void)
-{
- int i;
-
- if (machine_is_igep0020()) {
- igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
- igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
- igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
- } else {
- igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
- igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
- igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
- }
-
- if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) {
- pr_warning("IGEP v2: Could not obtain leds gpios\n");
- return;
- }
-
- for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++)
- gpio_export(igep_gpio_leds[i].gpio, 0);
-}
-#endif
-
-static struct gpio igep2_twl_gpios[] = {
- { -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" },
- { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" },
-};
-
-static int igep_twl_gpio_setup(struct device *dev,
- unsigned gpio, unsigned ngpio)
-{
- int ret;
-
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap_hsmmc_late_init(mmc);
-
- /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
- ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH,
- "gpio-led:green:d1");
- if (ret == 0)
- gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
- else
- pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n");
-#else
- igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
- if (machine_is_igep0030())
- return 0;
-
- /*
- * REVISIT: need ehci-omap hooks for external VBUS
- * power switch and overcurrent detect
- */
- igep2_twl_gpios[0].gpio = gpio + 1;
-
- /* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */
- igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX;
-
- ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios));
- if (ret < 0)
- pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
-
- return 0;
-};
-
-static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
- .use_leds = true,
- .setup = igep_twl_gpio_setup,
-};
-
-static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 3,
-};
-
-static struct platform_device omap3stalker_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &omap3stalker_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = IGEP2_GPIO_DVI_PUP,
-};
-
-static struct platform_device omap3stalker_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &omap3stalker_tfp410_pdata,
-};
-
-static struct omap_dss_board_info igep2_dss_data = {
- .default_display_name = "dvi",
-};
-
-static struct platform_device *igep_devices[] __initdata = {
- &igep_vwlan_device,
- &omap3stalker_tfp410_device,
- &omap3stalker_dvi_connector_device,
-};
-
-static int igep2_keymap[] = {
- KEY(0, 0, KEY_LEFT),
- KEY(0, 1, KEY_RIGHT),
- KEY(0, 2, KEY_A),
- KEY(0, 3, KEY_B),
- KEY(1, 0, KEY_DOWN),
- KEY(1, 1, KEY_UP),
- KEY(1, 2, KEY_E),
- KEY(1, 3, KEY_F),
- KEY(2, 0, KEY_ENTER),
- KEY(2, 1, KEY_I),
- KEY(2, 2, KEY_J),
- KEY(2, 3, KEY_K),
- KEY(3, 0, KEY_M),
- KEY(3, 1, KEY_N),
- KEY(3, 2, KEY_O),
- KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data igep2_keymap_data = {
- .keymap = igep2_keymap,
- .keymap_size = ARRAY_SIZE(igep2_keymap),
-};
-
-static struct twl4030_keypad_data igep2_keypad_pdata = {
- .keymap_data = &igep2_keymap_data,
- .rows = 4,
- .cols = 4,
- .rep = 1,
-};
-
-static struct twl4030_platform_data igep_twldata = {
- /* platform_data for children goes here */
- .gpio = &igep_twl4030_gpio_pdata,
- .vmmc1 = &igep_vmmc1,
- .vio = &igep_vio,
-};
-
-static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
- {
- I2C_BOARD_INFO("eeprom", 0x50),
- },
-};
-
-static void __init igep_i2c_init(void)
-{
- int ret;
-
- omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
- TWL_COMMON_REGULATOR_VPLL2);
- igep_twldata.vpll2->constraints.apply_uV = true;
- igep_twldata.vpll2->constraints.name = "VDVI";
-
- if (machine_is_igep0020()) {
- /*
- * Bus 3 is attached to the DVI port where devices like the
- * pico DLP projector don't work reliably with 400kHz
- */
- ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
- ARRAY_SIZE(igep2_i2c3_boardinfo));
- if (ret)
- pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
-
- igep_twldata.keypad = &igep2_keypad_pdata;
- /* Get common pmic data */
- omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
- }
-
- omap3_pmic_init("twl4030", &igep_twldata);
-}
-
-static struct usbhs_phy_data igep2_phy_data[] __initdata = {
- {
- .port = 1,
- .reset_gpio = IGEP2_GPIO_USBH_NRESET,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct usbhs_phy_data igep3_phy_data[] __initdata = {
- {
- .port = 2,
- .reset_gpio = IGEP3_GPIO_USBH_NRESET,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- /* Display Sub System */
- OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- /* TFP410 PanelBus DVI Transmitte (GPIO_170) */
- OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
- OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
-static struct gpio igep_wlan_bt_gpios[] __initdata = {
- { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" },
- { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" },
- { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" },
-};
-
-static void __init igep_wlan_bt_init(void)
-{
- int err;
-
- /* GPIO's for WLAN-BT combo depends on hardware revision */
- if (hwrev == IGEP2_BOARD_HWREV_B) {
- igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD;
- igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET;
- igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET;
- } else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) {
- igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD;
- igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET;
- igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET;
- } else
- return;
-
- /* Make sure that the GPIO pins are muxed correctly */
- omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
- omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
- omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
-
- err = gpio_request_array(igep_wlan_bt_gpios,
- ARRAY_SIZE(igep_wlan_bt_gpios));
- if (err) {
- pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n");
- return;
- }
-
- gpio_export(igep_wlan_bt_gpios[0].gpio, 0);
- gpio_export(igep_wlan_bt_gpios[1].gpio, 0);
- gpio_export(igep_wlan_bt_gpios[2].gpio, 0);
-
- gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0);
- udelay(10);
- gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1);
-
-}
-#else
-static inline void __init igep_wlan_bt_init(void) { }
-#endif
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init igep_init(void)
-{
- regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-
- /* Get IGEP2 hardware revision */
- igep2_get_revision();
-
- omap_hsmmc_init(mmc);
-
- /* Register I2C busses and drivers */
- igep_i2c_init();
- platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
- omap_serial_init();
- omap_sdrc_init(m65kxxxxam_sdrc_params,
- m65kxxxxam_sdrc_params);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
-
- igep_flash_init();
- igep_leds_init();
- omap_twl4030_audio_init("igep2", NULL);
-
- /*
- * WLAN-BT combo module from MuRata which has a Marvell WLAN
- * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
- */
- igep_wlan_bt_init();
-
- if (machine_is_igep0020()) {
- omap_display_init(&igep2_dss_data);
- igep2_init_smsc911x();
- usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
- usbhs_init(&igep2_usbhs_bdata);
- } else {
- usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
- usbhs_init(&igep3_usbhs_bdata);
- }
-}
-
-MACHINE_START(IGEP0020, "IGEP v2 board")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap35xx_init_early,
- .init_irq = omap3_init_irq,
- .handle_irq = omap3_intc_handle_irq,
- .init_machine = igep_init,
- .init_late = omap35xx_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(IGEP0030, "IGEP OMAP3 module")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap35xx_init_early,
- .init_irq = omap3_init_irq,
- .handle_irq = omap3_intc_handle_irq,
- .init_machine = igep_init,
- .init_late = omap35xx_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-17 15:44:02 +0000