aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-igep0020.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-igep0020.c')
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c124
1 files changed, 74 insertions, 50 deletions
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5e035a58b80..0afa3011db0 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
@@ -136,16 +137,9 @@ static struct mtd_partition igep2_onenand_partitions[] = {
},
};
-static int igep2_onenand_setup(void __iomem *onenand_base, int freq)
-{
- /* nothing is required to be setup for onenand as of now */
- return 0;
-}
-
static struct omap_onenand_platform_data igep2_onenand_data = {
.parts = igep2_onenand_partitions,
.nr_parts = ARRAY_SIZE(igep2_onenand_partitions),
- .onenand_setup = igep2_onenand_setup,
.dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
};
@@ -159,35 +153,34 @@ static struct platform_device igep2_onenand_device = {
static void __init igep2_flash_init(void)
{
- u8 cs = 0;
- u8 onenandcs = GPMC_CS_NUM + 1;
+ u8 cs = 0;
+ u8 onenandcs = GPMC_CS_NUM + 1;
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
+ for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+ u32 ret;
ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
/* Check if NAND/oneNAND is configured */
if ((ret & 0xC00) == 0x800)
/* NAND found */
- pr_err("IGEP v2: Unsupported NAND found\n");
+ pr_err("IGEP2: Unsupported NAND found\n");
else {
ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
if ((ret & 0x3F) == (ONENAND_MAP >> 24))
/* ONENAND found */
onenandcs = cs;
}
- cs++;
}
+
if (onenandcs > GPMC_CS_NUM) {
- pr_err("IGEP v2: Unable to find configuration in GPMC\n");
+ pr_err("IGEP2: Unable to find configuration in GPMC\n");
return;
}
- if (onenandcs < GPMC_CS_NUM) {
- igep2_onenand_data.cs = onenandcs;
- if (platform_device_register(&igep2_onenand_device) < 0)
- pr_err("IGEP v2: Unable to register OneNAND device\n");
- }
+ igep2_onenand_data.cs = onenandcs;
+
+ if (platform_device_register(&igep2_onenand_device) < 0)
+ pr_err("IGEP2: Unable to register OneNAND device\n");
}
#else
@@ -254,12 +247,8 @@ static inline void __init igep2_init_smsc911x(void)
static inline void __init igep2_init_smsc911x(void) { }
#endif
-static struct omap_board_config_kernel igep2_config[] __initdata = {
-};
-
-static struct regulator_consumer_supply igep2_vmmc1_supply = {
- .supply = "vmmc",
-};
+static struct regulator_consumer_supply igep2_vmmc1_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep2_vmmc1 = {
@@ -276,6 +265,52 @@ static struct regulator_init_data igep2_vmmc1 = {
.consumer_supplies = &igep2_vmmc1_supply,
};
+static struct regulator_consumer_supply igep2_vio_supply =
+ REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
+
+static struct regulator_init_data igep2_vio = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &igep2_vio_supply,
+};
+
+static struct regulator_consumer_supply igep2_vmmc2_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
+static struct regulator_init_data igep2_vmmc2 = {
+ .constraints = {
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &igep2_vmmc2_supply,
+};
+
+static struct fixed_voltage_config igep2_vwlan = {
+ .supply_name = "vwlan",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .enabled_at_boot = 1,
+ .init_data = &igep2_vmmc2,
+};
+
+static struct platform_device igep2_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &igep2_vwlan,
+ },
+};
+
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -317,6 +352,7 @@ static struct gpio_led igep2_gpio_leds[] = {
.name = "gpio-led:green:d1",
.default_trigger = "heartbeat",
.gpio = -EINVAL, /* gets replaced */
+ .active_low = 1,
},
};
@@ -342,24 +378,21 @@ static void __init igep2_leds_init(void)
static inline void igep2_leds_init(void)
{
if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&
- (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
+ (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0))
gpio_export(IGEP2_GPIO_LED0_RED, 0);
- gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
- } else
+ else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&
- (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
+ (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0))
gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
- gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
- } else
+ else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&
- (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
+ (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0))
gpio_export(IGEP2_GPIO_LED1_RED, 0);
- gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
- } else
+ else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
}
@@ -373,12 +406,6 @@ static int igep2_twl_gpio_setup(struct device *dev,
omap2_hsmmc_init(mmc);
/*
- * link regulators to MMC adapters ... we "know" the
- * regulators will be set up only *after* we return.
- */
- igep2_vmmc1_supply.dev = mmc[0].dev;
-
- /*
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
@@ -397,10 +424,9 @@ static int igep2_twl_gpio_setup(struct device *dev,
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
- && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
+ && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0))
gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
- gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
- } else
+ else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
#else
igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -489,15 +515,15 @@ static void __init igep2_display_init(void)
static struct platform_device *igep2_devices[] __initdata = {
&igep2_dss_device,
+ &igep2_vwlan_device,
};
static void __init igep2_init_irq(void)
{
- omap_board_config = igep2_config;
- omap_board_config_size = ARRAY_SIZE(igep2_config);
- omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
+ omap2_init_common_infrastructure();
+ omap2_init_common_devices(m65kxxxxam_sdrc_params,
+ m65kxxxxam_sdrc_params);
omap_init_irq();
- omap_gpio_init();
}
static struct twl4030_codec_audio_data igep2_audio_data = {
@@ -519,7 +545,7 @@ static struct twl4030_platform_data igep2_twldata = {
.gpio = &igep2_twl4030_gpio_pdata,
.vmmc1 = &igep2_vmmc1,
.vpll2 = &igep2_vpll2,
-
+ .vio = &igep2_vio,
};
static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = {
@@ -577,8 +603,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
-#else
-#define board_mux NULL
#endif
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-12 02:35:42 +0000