diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-cm-t3517.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-cm-t3517.c | 29 |
1 files changed, 24 insertions, 5 deletions
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 5b0c77732df..8f9a64d650e 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {} #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) #define RTC_IO_GPIO (153) #define RTC_WR_GPIO (154) -#define RTC_RD_GPIO (160) +#define RTC_RD_GPIO (53) #define RTC_CS_GPIO (163) +#define RTC_CS_EN_GPIO (160) struct v3020_platform_data cm_t3517_v3020_pdata = { .use_gpio = 1, @@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = { static void __init cm_t3517_init_rtc(void) { + int err; + + err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en"); + if (err) { + pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); + return; + } + + gpio_direction_output(RTC_CS_EN_GPIO, 1); + platform_device_register(&cm_t3517_rtc_device); } #else @@ -214,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = { }, { .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ .size = 32 * NAND_BLOCK_SIZE, }, { .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ .size = MTDPART_SIZ_FULL, }, }; @@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void) static struct omap_board_mux board_mux[] __initdata = { /* GPIO186 - Green LED */ OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* RTC GPIOs: IO, WR#, RD#, CS# */ + + /* RTC GPIOs: */ + /* IO - GPIO153 */ OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* WR# - GPIO154 */ OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* RD# - GPIO53 */ + OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* CS# - GPIO163 */ OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* CS EN - GPIO160 */ + OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* HSUSB1 RESET */ OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), /* HSUSB2 RESET */ |