diff options
Diffstat (limited to 'arch/arm/mach-omap1')
58 files changed, 2895 insertions, 1437 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 55ecc01ea20..27f489747bb 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -11,6 +11,7 @@ config ARCH_OMAP850 depends on ARCH_OMAP1 bool "OMAP850 Based System" select CPU_ARM926T + select ARCH_OMAP_OTG config ARCH_OMAP15XX depends on ARCH_OMAP1 @@ -56,6 +57,12 @@ config MACH_OMAP_HTCWIZARD help HTC Wizard smartphone support (AKA QTEK 9100, ...) +config MACH_HERALD + bool "HTC Herald" + depends on ARCH_OMAP850 + help + HTC Herald smartphone support (AKA T-Mobile Wing, ...) + config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 6867cd3ad0b..9ce17f13d3f 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o +obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o +obj-y += clock.o clock_data.o opp_data.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -17,6 +18,9 @@ obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + led-y := leds.o # Specific board support @@ -34,6 +38,7 @@ obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o +obj-$(CONFIG_MACH_HERALD) += board-htcherald.o ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA @@ -47,3 +52,7 @@ led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o obj-$(CONFIG_LEDS) += $(led-y) + +ifneq ($(CONFIG_FB_OMAP),) +obj-y += lcd_dma.o +endif diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 42920f9c1a1..7fc11c34b69 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -25,13 +25,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board-ams-delta.h> +#include <plat/board-ams-delta.h> #include <mach/gpio.h> -#include <mach/keypad.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/keypad.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> static u8 ams_delta_latch1_reg; static u16 ams_delta_latch2_reg; @@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = { static void __init ams_delta_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); omap_board_config = ams_delta_config; @@ -231,6 +235,8 @@ static void __init ams_delta_init(void) omap_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); + + omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } static struct plat_serial8250_port ams_delta_modem_ports[] = { diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index a7ead1b9322..7e70c3c08da 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -19,6 +19,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -26,14 +27,13 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/tc.h> +#include <plat/tc.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/fpga.h> -#include <mach/nand.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/board.h> +#include <plat/mux.h> +#include <plat/fpga.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/board.h> /* fsample is pretty close to p2-sample */ @@ -100,6 +100,12 @@ static int fsample_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -107,7 +113,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -167,8 +173,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define FSAMPLE_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -178,7 +216,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -190,14 +228,17 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; @@ -233,13 +274,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config fsample_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -250,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = { static void __init omap_fsample_init(void) { - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) + if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); @@ -309,7 +343,7 @@ static void __init omap_fsample_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -320,21 +354,21 @@ static void __init omap_fsample_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index fb47239da72..e1195a3467b 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -23,10 +23,10 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> static void __init omap_generic_init_irq(void) { @@ -64,6 +64,14 @@ static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_usb_init(&generic1510_usb_config); } #endif diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 46098f54682..b30c4990744 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -16,7 +16,7 @@ #include <linux/i2c/tps65010.h> -#include <mach/mmc.h> +#include <plat/mmc.h> #include <mach/gpio.h> #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index aab860307dc..fa7cecea19f 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -28,6 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/input.h> #include <linux/i2c/tps65010.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/gpio.h> @@ -37,14 +38,13 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/dma.h> -#include <mach/tc.h> -#include <mach/nand.h> -#include <mach/irda.h> -#include <mach/usb.h> -#include <mach/keypad.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/dma.h> +#include <plat/tc.h> +#include <plat/irda.h> +#include <plat/usb.h> +#include <plat/keypad.h> +#include <plat/common.h> #include "board-h2.h" @@ -179,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data h2_nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = h2_nand_partitions, - .nr_parts = ARRAY_SIZE(h2_nand_partitions), +static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H2_NAND_RB_GPIO_PIN 62 + +static int h2_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H2_NAND_RB_GPIO_PIN); +} + +static const char *h2_part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data h2_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(h2_nand_partitions), + .partitions = h2_nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = h2_part_probes, + }, + .ctrl = { + .cmd_ctrl = h2_nand_cmd_ctl, + .dev_ready = h2_nand_dev_ready, + + }, }; static struct resource h2_nand_resource = { @@ -191,15 +223,21 @@ static struct resource h2_nand_resource = { }; static struct platform_device h2_nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &h2_nand_data, + .platform_data = &h2_nand_platdata, }, .num_resources = 1, .resource = &h2_nand_resource, }; +static struct smc91x_platdata h2_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource h2_smc91x_resources[] = { [0] = { .start = OMAP1610_ETHR_START, /* Physical */ @@ -216,6 +254,9 @@ static struct resource h2_smc91x_resources[] = { static struct platform_device h2_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &h2_smc91x_info, + }, .num_resources = ARRAY_SIZE(h2_smc91x_resources), .resource = h2_smc91x_resources, }; @@ -368,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { { OMAP_TAG_LCD, &h2_lcd_config }, }; -#define H2_NAND_RB_GPIO_PIN 62 - static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 5e8877ce35e..54b0f063e26 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,7 +16,7 @@ #include <linux/i2c/tps65010.h> -#include <mach/mmc.h> +#include <plat/mmc.h> #include <mach/gpio.h> #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 89586b80b8d..6a7f9c391cf 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -28,6 +28,7 @@ #include <linux/input.h> #include <linux/spi/spi.h> #include <linux/i2c/tps65010.h> +#include <linux/smc91x.h> #include <asm/setup.h> #include <asm/page.h> @@ -40,13 +41,12 @@ #include <asm/mach/map.h> #include <mach/irqs.h> -#include <mach/mux.h> -#include <mach/tc.h> -#include <mach/nand.h> -#include <mach/usb.h> -#include <mach/keypad.h> -#include <mach/dma.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/tc.h> +#include <plat/usb.h> +#include <plat/keypad.h> +#include <plat/dma.h> +#include <plat/common.h> #include "board-h3.h" @@ -181,11 +181,43 @@ static struct mtd_partition nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = nand_partitions, - .nr_parts = ARRAY_SIZE(nand_partitions), +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H3_NAND_RB_GPIO_PIN 10 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H3_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(nand_partitions), + .partitions = nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + + }, }; static struct resource nand_resource = { @@ -193,15 +225,21 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &nand_data, + .platform_data = &nand_platdata, }, .num_resources = 1, .resource = &nand_resource, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = OMAP1710_ETHR_START, /* Physical */ @@ -218,6 +256,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -332,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; -#define H3_NAND_RB_GPIO_PIN 10 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(H3_NAND_RB_GPIO_PIN); -} - static void __init h3_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped @@ -356,7 +390,7 @@ static void __init h3_init(void) nand_resource.end += SZ_4K - 1; if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c new file mode 100644 index 00000000000..e36639f6615 --- /dev/null +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -0,0 +1,311 @@ +/* + * HTC Herald board configuration + * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com> + * Copyright (C) 2009 Wing Linux + * + * Based on the board-htcwizard.c file from the linwizard project: + * Copyright (C) 2006 Unai Uribarri + * Copyright (C) 2008 linwizard.sourceforge.net + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> |