diff options
Diffstat (limited to 'arch/arm/mach-omap1/sleep.S')
| -rw-r--r-- | arch/arm/mach-omap1/sleep.S | 161 |
1 files changed, 0 insertions, 161 deletions
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index abef33d10f0..68f5b39030b 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -39,167 +39,6 @@ .text -/* - * Forces OMAP into idle state - * - * omapXXXX_idle_loop_suspend() - * - * Note: This code get's copied to internal SRAM at boot. When the OMAP - * wakes up it continues execution at the point it went to sleep. - * - * Note: Because of slightly different configuration values we have - * processor specific functions here. - */ - -#if defined(CONFIG_ARCH_OMAP730) -ENTRY(omap730_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_730: subs r5, r5, #1 - bne l_730 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap730_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap730_idle_loop_suspend_sz) - .word . - omap730_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP730 */ - -#ifdef CONFIG_ARCH_OMAP15XX -ENTRY(omap1510_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP1510_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1510: subs r5, r5, #1 - bne l_1510 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap1510_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap1510_idle_loop_suspend_sz) - .word . - omap1510_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP15XX */ - -#if defined(CONFIG_ARCH_OMAP16XX) -ENTRY(omap1610_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP1610_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1610: subs r5, r5, #1 - bne l_1610 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap1610_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap1610_idle_loop_suspend_sz) - .word . - omap1610_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP16XX */ /* * Forces OMAP into deep sleep state |