diff options
Diffstat (limited to 'arch/arm/mach-mxs')
| -rw-r--r-- | arch/arm/mach-mxs/Makefile | 5 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/clock-mx23.c | 536 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/clock-mx28.c | 803 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/clock.c | 211 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/include/mach/clock.h | 62 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/include/mach/common.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/mach-mx28evk.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/regs-clkctrl-mx23.h | 331 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/regs-clkctrl-mx28.h | 486 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/system.c | 16 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/timer.c | 11 |
11 files changed, 13 insertions, 2456 deletions
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 908bf9a567f..6ce21a26412 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,12 +1,9 @@ # Common support -obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o +obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_SOC_IMX23) += clock-mx23.o -obj-$(CONFIG_SOC_IMX28) += clock-mx28.o - obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c deleted file mode 100644 index e3ac52c3401..00000000000 --- a/arch/arm/mach-mxs/clock-mx23.c +++ /dev/null @@ -1,536 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/jiffies.h> -#include <linux/clkdev.h> - -#include <asm/clkdev.h> -#include <asm/div64.h> - -#include <mach/mx23.h> -#include <mach/common.h> -#include <mach/clock.h> - -#include "regs-clkctrl-mx23.h" - -#define CLKCTRL_BASE_ADDR MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR) -#define DIGCTRL_BASE_ADDR MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR) - -#define PARENT_RATE_SHIFT 8 - -static int _raw_clk_enable(struct clk *clk) -{ - u32 reg; - - if (clk->enable_reg) { - reg = __raw_readl(clk->enable_reg); - reg &= ~(1 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); - } - - return 0; -} - -static void _raw_clk_disable(struct clk *clk) -{ - u32 reg; - - if (clk->enable_reg) { - reg = __raw_readl(clk->enable_reg); - reg |= 1 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - } -} - -/* - * ref_xtal_clk - */ -static unsigned long ref_xtal_clk_get_rate(struct clk *clk) -{ - return 24000000; -} - -static struct clk ref_xtal_clk = { - .get_rate = ref_xtal_clk_get_rate, -}; - -/* - * pll_clk - */ -static unsigned long pll_clk_get_rate(struct clk *clk) -{ - return 480000000; -} - -static int pll_clk_enable(struct clk *clk) -{ - __raw_writel(BM_CLKCTRL_PLLCTRL0_POWER | - BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_SET); - - /* Only a 10us delay is need. PLLCTRL1 LOCK bitfied is only a timer - * and is incorrect (excessive). Per definition of the PLLCTRL0 - * POWER field, waiting at least 10us. - */ - udelay(10); - - return 0; -} - -static void pll_clk_disable(struct clk *clk) -{ - __raw_writel(BM_CLKCTRL_PLLCTRL0_POWER | - BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_CLR); -} - -static struct clk pll_clk = { - .get_rate = pll_clk_get_rate, - .enable = pll_clk_enable, - .disable = pll_clk_disable, - .parent = &ref_xtal_clk, -}; - -/* - * ref_clk - */ -#define _CLK_GET_RATE_REF(name, sr, ss) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - unsigned long parent_rate; \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr); \ - div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f; \ - parent_rate = clk_get_rate(clk->parent); \ - \ - return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18, \ - div, PARENT_RATE_SHIFT); \ -} - -_CLK_GET_RATE_REF(ref_cpu_clk, FRAC, CPU) -_CLK_GET_RATE_REF(ref_emi_clk, FRAC, EMI) -_CLK_GET_RATE_REF(ref_pix_clk, FRAC, PIX) -_CLK_GET_RATE_REF(ref_io_clk, FRAC, IO) - -#define _DEFINE_CLOCK_REF(name, er, es) \ - static struct clk name = { \ - .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ - .enable_shift = BP_CLKCTRL_##er##_CLKGATE##es, \ - .get_rate = name##_get_rate, \ - .enable = _raw_clk_enable, \ - .disable = _raw_clk_disable, \ - .parent = &pll_clk, \ - } - -_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC, CPU); -_DEFINE_CLOCK_REF(ref_emi_clk, FRAC, EMI); -_DEFINE_CLOCK_REF(ref_pix_clk, FRAC, PIX); -_DEFINE_CLOCK_REF(ref_io_clk, FRAC, IO); - -/* - * General clocks - * - * clk_get_rate - */ -static unsigned long rtc_clk_get_rate(struct clk *clk) -{ - /* ref_xtal_clk is implemented as the only parent */ - return clk_get_rate(clk->parent) / 768; -} - -static unsigned long clk32k_clk_get_rate(struct clk *clk) -{ - return clk->parent->get_rate(clk->parent) / 750; -} - -#define _CLK_GET_RATE(name, rs) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - \ - if (clk->parent == &ref_xtal_clk) \ - div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >> \ - BP_CLKCTRL_##rs##_DIV_XTAL; \ - else \ - div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >> \ - BP_CLKCTRL_##rs##_DIV_##rs; \ - \ - if (!div) \ - return -EINVAL; \ - \ - return clk_get_rate(clk->parent) / div; \ -} - -_CLK_GET_RATE(cpu_clk, CPU) -_CLK_GET_RATE(emi_clk, EMI) - -#define _CLK_GET_RATE1(name, rs) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV; \ - \ - if (!div) \ - return -EINVAL; \ - \ - return clk_get_rate(clk->parent) / div; \ -} - -_CLK_GET_RATE1(hbus_clk, HBUS) -_CLK_GET_RATE1(xbus_clk, XBUS) -_CLK_GET_RATE1(ssp_clk, SSP) -_CLK_GET_RATE1(gpmi_clk, GPMI) -_CLK_GET_RATE1(lcdif_clk, PIX) - -#define _CLK_GET_RATE_STUB(name) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - return clk_get_rate(clk->parent); \ -} - -_CLK_GET_RATE_STUB(uart_clk) -_CLK_GET_RATE_STUB(audio_clk) -_CLK_GET_RATE_STUB(pwm_clk) - -/* - * clk_set_rate - */ -static int cpu_clk_set_rate(struct clk *clk, unsigned long rate) -{ - u32 reg, bm_busy, div_max, d, f, div, frac; - unsigned long diff, parent_rate, calc_rate; - - parent_rate = clk_get_rate(clk->parent); - - if (clk->parent == &ref_xtal_clk) { - div_max = BM_CLKCTRL_CPU_DIV_XTAL >> BP_CLKCTRL_CPU_DIV_XTAL; - bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL; - div = DIV_ROUND_UP(parent_rate, rate); - if (div == 0 || div > div_max) - return -EINVAL; - } else { - div_max = BM_CLKCTRL_CPU_DIV_CPU >> BP_CLKCTRL_CPU_DIV_CPU; - bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU; - rate >>= PARENT_RATE_SHIFT; - parent_rate >>= PARENT_RATE_SHIFT; - diff = parent_rate; - div = frac = 1; - for (d = 1; d <= div_max; d++) { - f = parent_rate * 18 / d / rate; - if ((parent_rate * 18 / d) % rate) - f++; - if (f < 18 || f > 35) - continue; - - calc_rate = parent_rate * 18 / f / d; - if (calc_rate > rate) - continue; - - if (rate - calc_rate < diff) { - frac = f; - div = d; - diff = rate - calc_rate; - } - - if (diff == 0) - break; - } - - if (diff == parent_rate) - return -EINVAL; - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); - reg &= ~BM_CLKCTRL_FRAC_CPUFRAC; - reg |= frac; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); - } - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); - reg &= ~BM_CLKCTRL_CPU_DIV_CPU; - reg |= div << BP_CLKCTRL_CPU_DIV_CPU; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); - - mxs_clkctrl_timeout(HW_CLKCTRL_CPU, bm_busy); - - return 0; -} - -#define _CLK_SET_RATE(name, dr) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - u32 reg, div_max, div; \ - unsigned long parent_rate; \ - \ - parent_rate = clk_get_rate(clk->parent); \ - div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ - \ - div = DIV_ROUND_UP(parent_rate, rate); \ - if (div == 0 || div > div_max) \ - return -EINVAL; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - reg &= ~BM_CLKCTRL_##dr##_DIV; \ - reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg & (1 << clk->enable_shift)) { \ - pr_err("%s: clock is gated\n", __func__); \ - return -EINVAL; \ - } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - \ - mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY); \ - return 0; \ -} - -_CLK_SET_RATE(xbus_clk, XBUS) -_CLK_SET_RATE(ssp_clk, SSP) -_CLK_SET_RATE(gpmi_clk, GPMI) -_CLK_SET_RATE(lcdif_clk, PIX) - -#define _CLK_SET_RATE_STUB(name) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - return -EINVAL; \ -} - -_CLK_SET_RATE_STUB(emi_clk) -_CLK_SET_RATE_STUB(uart_clk) -_CLK_SET_RATE_STUB(audio_clk) -_CLK_SET_RATE_STUB(pwm_clk) -_CLK_SET_RATE_STUB(clk32k_clk) - -/* - * clk_set_parent - */ -#define _CLK_SET_PARENT(name, bit) \ -static int name##_set_parent(struct clk *clk, struct clk *parent) \ -{ \ - if (parent != clk->parent) { \ - __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ - clk->parent = parent; \ - } \ - \ - return 0; \ -} - -_CLK_SET_PARENT(cpu_clk, CPU) -_CLK_SET_PARENT(emi_clk, EMI) -_CLK_SET_PARENT(ssp_clk, SSP) -_CLK_SET_PARENT(gpmi_clk, GPMI) -_CLK_SET_PARENT(lcdif_clk, PIX) - -#define _CLK_SET_PARENT_STUB(name) \ -static int name##_set_parent(struct clk *clk, struct clk *parent) \ -{ \ - if (parent != clk->parent) \ - return -EINVAL; \ - else \ - return 0; \ -} - -_CLK_SET_PARENT_STUB(uart_clk) -_CLK_SET_PARENT_STUB(audio_clk) -_CLK_SET_PARENT_STUB(pwm_clk) -_CLK_SET_PARENT_STUB(clk32k_clk) - -/* - * clk definition - */ -static struct clk cpu_clk = { - .get_rate = cpu_clk_get_rate, - .set_rate = cpu_clk_set_rate, - .set_parent = cpu_clk_set_parent, - .parent = &ref_cpu_clk, -}; - -static struct clk hbus_clk = { - .get_rate = hbus_clk_get_rate, - .parent = &cpu_clk, -}; - -static struct clk xbus_clk = { - .get_rate = xbus_clk_get_rate, - .set_rate = xbus_clk_set_rate, - .parent = &ref_xtal_clk, -}; - -static struct clk rtc_clk = { - .get_rate = rtc_clk_get_rate, - .parent = &ref_xtal_clk, -}; - -/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */ -static struct clk usb_clk = { - .enable_reg = DIGCTRL_BASE_ADDR, - .enable_shift = 2, - .enable = _raw_clk_enable, - .disable = _raw_clk_disable, - .parent = &pll_clk, -}; - -#define _DEFINE_CLOCK(name, er, es, p) \ - static struct clk name = { \ - .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ - .enable_shift = BP_CLKCTRL_##er##_##es, \ - .get_rate = name##_get_rate, \ - .set_rate = name##_set_rate, \ - .set_parent = name##_set_parent, \ - .enable = _raw_clk_enable, \ - .disable = _raw_clk_disable, \ - .parent = p, \ - } - -_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(ssp_clk, SSP, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(lcdif_clk, PIX, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk); -_DEFINE_CLOCK(audio_clk, XTAL, FILT_CLK24M_GATE, &ref_xtal_clk); -_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk); -_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); - -#define _REGISTER_CLOCK(d, n, c) \ - { \ - .dev_id = d, \ - .con_id = n, \ - .clk = &c, \ - }, - -static struct clk_lookup lookups[] = { - /* for amba bus driver */ - _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk) - /* for amba-pl011 driver */ - _REGISTER_CLOCK("duart", NULL, uart_clk) - _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) - _REGISTER_CLOCK("rtc", NULL, rtc_clk) - _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk) - _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) - _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk) - _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp_clk) - _REGISTER_CLOCK(NULL, "usb", usb_clk) - _REGISTER_CLOCK(NULL, "audio", audio_clk) - _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) - _REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk) - _REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk) -}; - -static int clk_misc_init(void) -{ - u32 reg; - int ret; - - /* Fix up parent per register setting */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ); - cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ? - &ref_xtal_clk : &ref_cpu_clk; - emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ? - &ref_xtal_clk : &ref_emi_clk; - ssp_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP) ? - &ref_xtal_clk : &ref_io_clk; - gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ? - &ref_xtal_clk : &ref_io_clk; - lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_PIX) ? - &ref_xtal_clk : &ref_pix_clk; - - /* Use int div over frac when both are available */ - __raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR); - __raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR); - __raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS); - reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP); - reg &= ~BM_CLKCTRL_SSP_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI); - reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX); - reg &= ~BM_CLKCTRL_PIX_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX); - - /* - * Set safe hbus clock divider. A divider of 3 ensure that - * the Vddd voltage required for the cpu clock is sufficiently - * high for the hbus clock. - */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - reg &= BM_CLKCTRL_HBUS_DIV; - reg |= 3 << BP_CLKCTRL_HBUS_DIV; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - - ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_BUSY); - - /* Gate off cpu clock in WFI for power saving */ - __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET); - - /* - * 480 MHz seems too high to be ssp clock source directly, - * so set frac to get a 288 MHz ref_io. - */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); - reg &= ~BM_CLKCTRL_FRAC_IOFRAC; - reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); - - return ret; -} - -int __init mx23_clocks_init(void) -{ - clk_misc_init(); - - /* - * source ssp clock from ref_io than ref_xtal, - * as ref_xtal only provides 24 MHz as maximum. - */ - clk_set_parent(&ssp_clk, &ref_io_clk); - - clk_prepare_enable(&cpu_clk); - clk_prepare_enable(&hbus_clk); - clk_prepare_enable(&xbus_clk); - clk_prepare_enable(&emi_clk); - clk_prepare_enable(&uart_clk); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0); - - return 0; -} diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c deleted file mode 100644 index cea29c99e21..00000000000 --- a/arch/arm/mach-mxs/clock-mx28.c +++ /dev/null @@ -1,803 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/jiffies.h> -#include <linux/clkdev.h> -#include <linux/spinlock.h> - -#include <asm/clkdev.h> -#include <asm/div64.h> - -#include <mach/mx28.h> -#include <mach/common.h> -#include <mach/clock.h> -#include <mach/digctl.h> - -#include "regs-clkctrl-mx28.h" - -#define CLKCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR) -#define DIGCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR) - -#define PARENT_RATE_SHIFT 8 - -static struct clk pll2_clk; -static struct clk cpu_clk; -static struct clk emi_clk; -static struct clk saif0_clk; -static struct clk saif1_clk; -static struct clk clk32k_clk; -static DEFINE_SPINLOCK(clkmux_lock); - -/* - * HW_SAIF_CLKMUX_SEL: - * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1 - * clock pins selected for SAIF1 input clocks. - * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and - * SAIF0 clock inputs selected for SAIF1 input clocks. - * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input - * clocks. - * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input - * clocks. - */ -int mxs_saif_clkmux_select(unsigned int clkmux) -{ - if (clkmux > 0x3) - return -EINVAL; - - spin_lock(&clkmux_lock); - __raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX, - DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR); - __raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX, - DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR); - spin_unlock(&clkmux_lock); - - return 0; -} - -static int _raw_clk_enable(struct clk *clk) -{ - u32 reg; - - if (clk->enable_reg) { - reg = __raw_readl(clk->enable_reg); - reg &= ~(1 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); - } - - return 0; -} - -static void _raw_clk_disable(struct clk *clk) -{ - u32 reg; - - if (clk->enable_reg) { - reg = __raw_readl(clk->enable_reg); - reg |= 1 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - } -} - -/* - * ref_xtal_clk - */ -static unsigned long ref_xtal_clk_get_rate(struct clk *clk) -{ - return 24000000; -} - -static struct clk ref_xtal_clk = { - .get_rate = ref_xtal_clk_get_rate, -}; - -/* - * pll_clk - */ -static unsigned long pll0_clk_get_rate(struct clk *clk) -{ - return 480000000; -} - -static unsigned long pll1_clk_get_rate(struct clk *clk) -{ - return 480000000; -} - -static unsigned long pll2_clk_get_rate(struct clk *clk) -{ - return 50000000; -} - -#define _CLK_ENABLE_PLL(name, r, g) \ -static int name##_enable(struct clk *clk) \ -{ \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_POWER, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \ - udelay(10); \ - \ - if (clk == &pll2_clk) \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \ - else \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \ - \ - return 0; \ -} - -_CLK_ENABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS) -_CLK_ENABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS) -_CLK_ENABLE_PLL(pll2_clk, PLL2, CLKGATE) - -#define _CLK_DISABLE_PLL(name, r, g) \ -static void name##_disable(struct clk *clk) \ -{ \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_POWER, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \ - \ - if (clk == &pll2_clk) \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \ - else \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \ - \ -} - -_CLK_DISABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS) -_CLK_DISABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS) -_CLK_DISABLE_PLL(pll2_clk, PLL2, CLKGATE) - -#define _DEFINE_CLOCK_PLL(name) \ - static struct clk name = { \ - .get_rate = name##_get_rate, \ - .enable = name##_enable, \ - .disable = name##_disable, \ - .parent = &ref_xtal_clk, \ - } - -_DEFINE_CLOCK_PLL(pll0_clk); -_DEFINE_CLOCK_PLL(pll1_clk); -_DEFINE_CLOCK_PLL(pll2_clk); - -/* - * ref_clk - */ -#define _CLK_GET_RATE_REF(name, sr, ss) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - unsigned long parent_rate; \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr); \ - div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f; \ - parent_rate = clk_get_rate(clk->parent); \ - \ - return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18, \ - div, PARENT_RATE_SHIFT); \ -} - -_CLK_GET_RATE_REF(ref_cpu_clk, FRAC0, CPU) -_CLK_GET_RATE_REF(ref_emi_clk, FRAC0, EMI) -_CLK_GET_RATE_REF(ref_io0_clk, FRAC0, IO0) -_CLK_GET_RATE_REF(ref_io1_clk, FRAC0, IO1) -_CLK_GET_RATE_REF(ref_pix_clk, FRAC1, PIX) -_CLK_GET_RATE_REF(ref_gpmi_clk, FRAC1, GPMI) - -#define _DEFINE_CLOCK_REF(name, er, es) \ - static struct clk name = { \ - .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ - .enable_shift = BP_CLKCTRL_##er##_CLKGATE##es, \ - .get_rate = name##_get_rate, \ - .enable = _raw_clk_enable, \ - .disable = _raw_clk_disable, \ - .parent = &pll0_clk, \ - } - -_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC0, CPU); -_DEFINE_CLOCK_REF(ref_emi_clk, FRAC0, EMI); -_DEFINE_CLOCK_REF(ref_io0_clk, FRAC0, IO0); -_DEFINE_CLOCK_REF(ref_io1_clk, FRAC0, IO1); -_DEFINE_CLOCK_REF(ref_pix_clk, FRAC1, PIX); -_DEFINE_CLOCK_REF(ref_gpmi_clk, FRAC1, GPMI); - -/* - * General clocks - * - * clk_get_rate - */ -static unsigned long lradc_clk_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / 16; -} - -static unsigned long rtc_clk_get_rate(struct clk *clk) -{ - /* ref_xtal_clk is implemented as the only parent */ - return clk_get_rate(clk->parent) / 768; -} - -static unsigned long clk32k_clk_get_rate(struct clk *clk) -{ - return clk->parent->get_rate(clk->parent) / 750; -} - -static unsigned long spdif_clk_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / 4; -} - -#define _CLK_GET_RATE(name, rs) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - \ - if (clk->parent == &ref_xtal_clk) \ - div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >> \ - BP_CLKCTRL_##rs##_DIV_XTAL; \ - else \ - div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >> \ - BP_CLKCTRL_##rs##_DIV_##rs; \ - \ - if (!div) \ - return -EINVAL; \ - \ - return clk_get_rate(clk->parent) / div; \ -} - -_CLK_GET_RATE(cpu_clk, CPU) -_CLK_GET_RATE(emi_clk, EMI) - -#define _CLK_GET_RATE1(name, rs) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV; \ - \ - if (!div) \ - return -EINVAL; \ - \ - if (clk == &saif0_clk || clk == &saif1_clk) \ - return clk_get_rate(clk->parent) >> 16 * div; \ - else \ - return clk_get_rate(clk->parent) / div; \ -} - -_CLK_GET_RATE1(hbus_clk, HBUS) -_CLK_GET_RATE1(xbus_clk, XBUS) -_CLK_GET_RATE1(ssp0_clk, SSP0) -_CLK_GET_RATE1(ssp1_clk, SSP1) -_CLK_GET_RATE1(ssp2_clk, SSP2) -_CLK_GET_RATE1(ssp3_clk, SSP3) -_CLK_GET_RATE1(gpmi_clk, GPMI) -_CLK_GET_RATE1(lcdif_clk, DIS_LCDIF) -_CLK_GET_RATE1(saif0_clk, SAIF0) -_CLK_GET_RATE1(saif1_clk, SAIF1) - -#define _CLK_GET_RATE_STUB(name) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - return clk_get_rate(clk->parent); \ -} - -_CLK_GET_RATE_STUB(uart_clk) -_CLK_GET_RATE_STUB(pwm_clk) -_CLK_GET_RATE_STUB(can0_clk) -_CLK_GET_RATE_STUB(can1_clk) -_CLK_GET_RATE_STUB(fec_clk) - -/* - * clk_set_rate - */ -/* fool compiler */ -#define BM_CLKCTRL_CPU_DIV 0 -#define BP_CLKCTRL_CPU_DIV 0 -#define BM_CLKCTRL_CPU_BUSY 0 - -#define _CLK_SET_RATE(name, dr, fr, fs) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - u32 reg, bm_busy, div_max, d, f, div, frac; \ - unsigned long diff, parent_rate, calc_rate; \ - \ - div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ - bm_busy = BM_CLKCTRL_##dr##_BUSY; \ - \ - if (clk->parent == &ref_xtal_clk) { \ - parent_rate = clk_get_rate(clk->parent); \ - div = DIV_ROUND_UP(parent_rate, rate); \ - if (clk == &cpu_clk) { \ - div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \ - BP_CLKCTRL_CPU_DIV_XTAL; \ - bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL; \ - } \ - if (div == 0 || div > div_max) \ - return -EINVAL; \ - } else { \ - /* \ - * hack alert: this block modifies clk->parent, too, \ - * so the base to use it the grand parent. \ - */ \ - parent_rate = clk_get_rate(clk->parent->parent); \ - rate >>= PARENT_RATE_SHIFT; \ - parent_rate >>= PARENT_RATE_SHIFT; \ - diff = parent_rate; \ - div = frac = 1; \ - if (clk == &cpu_clk) { \ - div_max = BM_CLKCTRL_CPU_DIV_CPU >> \ - BP_CLKCTRL_CPU_DIV_CPU; \ - bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU; \ - } \ - for (d = 1; d <= div_max; d++) { \ - f = parent_rate * 18 / d / rate; \ - if ((parent_rate * 18 / d) % rate) \ - f++; \ - if (f < 18 || f > 35) \ - continue; \ - \ - calc_rate = parent_rate * 18 / f / d; \ - if (calc_rate > rate) \ - continue; \ - \ - if (rate - calc_rate < diff) { \ - frac = f; \ - div = d; \ - diff = rate - calc_rate; \ - } \ - \ - if (diff == 0) \ - break; \ - } \ - \ - if (diff == parent_rate) \ - return -EINVAL; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ - reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \ - reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC; \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ - } \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - if (clk == &cpu_clk) { \ - reg &= ~BM_CLKCTRL_CPU_DIV_CPU; \ - reg |= div << BP_CLKCTRL_CPU_DIV_CPU; \ - } else { \ - reg &= ~BM_CLKCTRL_##dr##_DIV; \ - reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg & (1 << clk->enable_shift)) { \ - pr_err("%s: clock is gated\n", __func__); \ - return -EINVAL; \ - } \ - } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - \ - return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy); \ -} - -_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU) -_CLK_SET_RATE(ssp0_clk, SSP0, FRAC0, IO0) -_CLK_SET_RATE(ssp1_clk, SSP1, FRAC0, IO0) -_CLK_SET_RATE(ssp2_clk, SSP2, FRAC0, IO1) -_CLK_SET_RATE(ssp3_clk, SSP3, FRAC0, IO1) -_CLK_SET_RATE(lcdif_clk, DIS_LCDIF, FRAC1, PIX) -_CLK_SET_RATE(gpmi_clk, GPMI, FRAC1, GPMI) - -#define _CLK_SET_RATE1(name, dr) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - u32 reg, div_max, div; \ - unsigned long parent_rate; \ - \ - parent_rate = clk_get_rate(clk->parent); \ - div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ - \ - div = DIV_ROUND_UP(parent_rate, rate); \ - if (div == 0 || div > div_max) \ - return -EINVAL; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - reg &= ~BM_CLKCTRL_##dr##_DIV; \ - reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg & (1 << clk->enable_shift)) { \ - pr_err("%s: clock is gated\n", __func__); \ - return -EINVAL; \ - } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - \ - return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\ -} - -_CLK_SET_RATE1(xbus_clk, XBUS) - -/* saif clock uses 16 bits frac div */ -#define _CLK_SET_RATE_SAIF(name, rs) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - u16 div; \ - u32 reg; \ - u64 lrate; \ - unsigned long parent_rate; \ - \ - parent_rate = clk_get_rate(clk->parent); \ - if (rate > parent_rate) \ - return -EINVAL; \ - \ - lrate = (u64)rate << 16; \ - do_div(lrate, parent_rate); \ - div = (u16)lrate; \ - \ - if (!div) \ - return -EINVAL; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - reg &= ~BM_CLKCTRL_##rs##_DIV; \ - reg |= div << BP_CLKCTRL_##rs##_DIV; \ - if (reg & (1 << clk->enable_shift)) { \ - pr_err("%s: clock is gated\n", __func__); \ - return -EINVAL; \ - } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - \ - return mxs_clkctrl_timeout(HW_CLKCTRL_##rs, BM_CLKCTRL_##rs##_BUSY);\ -} - -_CLK_SET_RATE_SAIF(saif0_clk, SAIF0) -_CLK_SET_RATE_SAIF(saif1_clk, SAIF1) - -#define _CLK_SET_RATE_STUB(name) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - return -EINVAL; \ -} - -_CLK_SET_RATE_STUB(emi_clk) -_CLK_SET_RATE_STUB(uart_clk) -_CLK_SET_RATE_STUB(pwm_clk) -_CLK_SET_RATE_STUB(spdif_clk) -_CLK_SET_RATE_STUB(clk32k_clk) -_CLK_SET_RATE_STUB(can0_clk) -_CLK_SET_RATE_STUB(can1_clk) -_CLK_SET_RATE_STUB(fec_clk) - -/* - * clk_set_parent - */ -#define _CLK_SET_PARENT(name, bit) \ -static int name##_set_parent(struct clk *clk, struct clk *parent) \ -{ \ - if (parent != clk->parent) { \ - __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ - clk->parent = parent; \ - } \ - \ - return 0; \ -} - -_CLK_SET_PARENT(cpu_clk, CPU) -_CLK_SET_PARENT(emi_clk, EMI) -_CLK_SET_PARENT(ssp0_clk, SSP0) -_CLK_SET_PARENT(ssp1_clk, SSP1) -_CLK_SET_PARENT(ssp2_clk, SSP2) -_CLK_SET_PARENT(ssp3_clk, SSP3) -_CLK_SET_PARENT(lcdif_clk, DIS_LCDIF) -_CLK_SET_PARENT(gpmi_clk, GPMI) -_CLK_SET_PARENT(saif0_clk, SAIF0) -_CLK_SET_PARENT(saif1_clk, SAIF1) - -#define _CLK_SET_PARENT_STUB(name) \ -static int name##_set_parent(struct clk *clk, struct clk *parent) \ -{ \ - if (parent != clk->parent) \ |