diff options
Diffstat (limited to 'arch/arm/mach-mx5/mx51_efika.c')
| -rw-r--r-- | arch/arm/mach-mx5/mx51_efika.c | 636 |
1 files changed, 636 insertions, 0 deletions
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c new file mode 100644 index 00000000000..51a67fc7f0e --- /dev/null +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -0,0 +1,636 @@ +/* + * based on code from the following + * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. + * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/fsl_devices.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/mfd/mc13892.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/consumer.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-mx51.h> +#include <mach/i2c.h> +#include <mach/mxc_ehci.h> + +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <mach/ulpi.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> + +#include "devices-imx51.h" +#include "devices.h" +#include "efika.h" +#include "cpu_op-mx51.h" + +#define MX51_USB_CTRL_1_OFFSET 0x10 +#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) +#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 + +#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5) +#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27) + +#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) +#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) + +#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) + +static iomux_v3_cfg_t mx51efika_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, + + /* SD 1 */ + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, + + /* SD 2 */ + MX51_PAD_SD2_CMD__SD2_CMD, + MX51_PAD_SD2_CLK__SD2_CLK, + MX51_PAD_SD2_DATA0__SD2_DATA0, + MX51_PAD_SD2_DATA1__SD2_DATA1, + MX51_PAD_SD2_DATA2__SD2_DATA2, + MX51_PAD_SD2_DATA3__SD2_DATA3, + + /* SD/MMC WP/CD */ + MX51_PAD_GPIO1_0__SD1_CD, + MX51_PAD_GPIO1_1__SD1_WP, + MX51_PAD_GPIO1_7__SD2_WP, + MX51_PAD_GPIO1_8__SD2_CD, + + /* spi */ + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, + MX51_PAD_CSPI1_MISO__ECSPI1_MISO, + MX51_PAD_CSPI1_SS0__GPIO4_24, + MX51_PAD_CSPI1_SS1__GPIO4_25, + MX51_PAD_CSPI1_RDY__ECSPI1_RDY, + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, + MX51_PAD_GPIO1_6__GPIO1_6, + + /* USB HOST1 */ + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + + /* USB HUB RESET */ + MX51_PAD_GPIO1_5__GPIO1_5, + + /* WLAN */ + MX51_PAD_EIM_A22__GPIO2_16, + MX51_PAD_EIM_A16__GPIO2_10, + + /* USB PHY RESET */ + MX51_PAD_EIM_D27__GPIO2_9, +}; + +/* Serial ports */ +static const struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* This function is board specific as the bit mask for the plldiv will also + * be different for other Freescale SoCs, thus a common bitmask is not + * possible and cannot get place in /plat-mxc/ehci.c. + */ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + void __iomem *usbother_base; + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) + return -ENOMEM; + usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_19_2_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + + mdelay(10); + + return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, +}; + +static int initialize_usbh1_port(struct platform_device *pdev) +{ + iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; + iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27; + u32 v; + void __iomem *usb_base; + void __iomem *socregs_base; + + mxc_iomux_v3_setup_pad(usbh1gpio); + gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp"); + gpio_direction_output(EFIKAMX_USBH1_STP, 0); + msleep(1); + gpio_set_value(EFIKAMX_USBH1_STP, 1); + msleep(1); + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); + + /* The clock for the USBH1 ULPI port will come externally */ + /* from the PHY. */ + v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET); + __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, + socregs_base + MX51_USB_CTRL_1_OFFSET); + + iounmap(usb_base); + + gpio_free(EFIKAMX_USBH1_STP); + mxc_iomux_v3_setup_pad(usbh1stp); + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD); +} + +static struct mxc_usbh_platform_data usbh1_config = { + .init = initialize_usbh1_port, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static void mx51_efika_hubreset(void) +{ + gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst"); + gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1); + msleep(1); + gpio_set_value(EFIKAMX_USB_HUB_RESET, 0); + msleep(1); + gpio_set_value(EFIKAMX_USB_HUB_RESET, 1); +} + +static void __init mx51_efika_usb(void) +{ + mx51_efika_hubreset(); + + /* pulling it low, means no USB at all... */ + gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset"); + gpio_direction_output(EFIKA_USB_PHY_RESET, 0); + msleep(1); + gpio_set_value(EFIKA_USB_PHY_RESET, 1); + + usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND); + + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + if (usbh1_config.otg) + mxc_register_device(&mxc_usbh1_device, &usbh1_config); +} + +static struct mtd_partition mx51_efika_spi_nor_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_256K, + }, + { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + }, +}; + +static struct flash_platform_data mx51_efika_spi_flash_data = { + .name = "spi_flash", + .parts = mx51_efika_spi_nor_partitions, + .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions), + .type = "sst25vf032b", +}; + +static struct regulator_consumer_supply sw1_consumers[] = { + { + .supply = "cpu_vcc", + } +}; + +static struct regulator_consumer_supply vdig_consumers[] = { + /* sgtl5000 */ + REGULATOR_SUPPLY("VDDA", "1-000a"), + REGULATOR_SUPPLY("VDDD", "1-000a"), +}; + +static struct regulator_consumer_supply vvideo_consumers[] = { + /* sgtl5000 */ + REGULATOR_SUPPLY("VDDIO", "1-000a"), +}; + +static struct regulator_consumer_supply vsd_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"), + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"), +}; + +static struct regulator_consumer_supply pwgt1_consumer[] = { + { + .supply = "pwgt1", + } +}; + +static struct regulator_consumer_supply pwgt2_consumer[] = { + { + .supply = "pwgt2", + } +}; + +static struct regulator_consumer_supply coincell_consumer[] = { + { + .supply = "coincell", + } +}; + +static struct regulator_init_data sw1_init = { + .constraints = { + .name = "SW1", + .min_uV = 600000, + .max_uV = 1375000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = 0, + .always_on = 1, + .boot_on = 1, + .state_mem = { + .uV = 850000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), + .consumer_supplies = sw1_consumers, +}; + +static struct regulator_init_data sw2_init = { + .constraints = { + .name = "SW2", + .min_uV = 900000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + .state_mem = { + .uV = 950000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + } +}; + +static struct regulator_init_data sw3_init = { + .constraints = { + .name = "SW3", + .min_uV = 1100000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data sw4_init = { + .constraints = { + .name = "SW4", + .min_uV = 1100000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data viohi_init = { + .constraints = { + .name = "VIOHI", + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vusb_init = { + .constraints = { + .name = "VUSB", + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data swbst_init = { + .constraints = { + .name = "SWBST", + } +}; + +static struct regulator_init_data vdig_init = { + .constraints = { + .name = "VDIG", + .min_uV = 1050000, + .max_uV = 1800000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vdig_consumers), + .consumer_supplies = vdig_consumers, +}; + +static struct regulator_init_data vpll_init = { + .constraints = { + .name = "VPLL", + .min_uV = 1050000, + .max_uV = 1800000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vusb2_init = { + .constraints = { + .name = "VUSB2", + .min_uV = 2400000, + .max_uV = 2775000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vvideo_init = { + .constraints = { + .name = "VVIDEO", + .min_uV = 2775000, + .max_uV = 2775000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers), + .consumer_supplies = vvideo_consumers, +}; + +static struct regulator_init_data vaudio_init = { + .constraints = { + .name = "VAUDIO", + .min_uV = 2300000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + } +}; + +static struct regulator_init_data vsd_init = { + .constraints = { + .name = "VSD", + .min_uV = 1800000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vsd_consumers), + .consumer_supplies = vsd_consumers, +}; + +static struct regulator_init_data vcam_init = { + .constraints = { + .name = "VCAM", + .min_uV = 2500000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, + .boot_on = 1, + } +}; + +static struct regulator_init_data vgen1_init = { + .constraints = { + .name = "VGEN1", + .min_uV = 1200000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen2_init = { + .constraints = { + .name = "VGEN2", + .min_uV = 1200000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen3_init = { + .constraints = { + .name = "VGEN3", + .min_uV = 1800000, + .max_uV = 2900000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data gpo1_init = { + .constraints = { + .name = "GPO1", + } +}; + +static struct regulator_init_data gpo2_init = { + .constraints = { + .name = "GPO2", + } +}; + +static struct regulator_init_data gpo3_init = { + .constraints = { + .name = "GPO3", + } +}; + +static struct regulator_init_data gpo4_init = { + .constraints = { + .name = "GPO4", + } +}; + +static struct regulator_init_data pwgt1_init = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer), + .consumer_supplies = pwgt1_consumer, +}; + +static struct regulator_init_data pwgt2_init = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer), + .consumer_supplies = pwgt2_consumer, +}; + +static struct regulator_init_data vcoincell_init = { + .constraints = { + .name = "COINCELL", + .min_uV = 3000000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(coincell_consumer), + .consumer_supplies = coincell_consumer, +}; + +static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = { + { .id = MC13892_SW1, .init_data = &sw1_init }, + { .id = MC13892_SW2, .init_data = &sw2_init }, + { .id = MC13892_SW3, .init_data = &sw3_init }, + { .id = MC13892_SW4, .init_data = &sw4_init }, + { .id = MC13892_SWBST, .init_data = &swbst_init }, + { .id = MC13892_VIOHI, .init_data = &viohi_init }, + { .id = MC13892_VPLL, .init_data = &vpll_init }, + { .id = MC13892_VDIG, .init_data = &vdig_init }, + { .id = MC13892_VSD, .init_data = &vsd_init }, + { .id = MC13892_VUSB2, .init_data = &vusb2_init }, + { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, + { .id = MC13892_VAUDIO, .init_data = &vaudio_init }, + { .id = MC13892_VCAM, .init_data = &vcam_init }, + { .id = MC13892_VGEN1, .init_data = &vgen1_init }, + { .id = MC13892_VGEN2, .init_data = &vgen2_init }, + { .id = MC13892_VGEN3, .init_data = &vgen3_init }, + { .id = MC13892_VUSB, .init_data = &vusb_init }, + { .id = MC13892_GPO1, .init_data = &gpo1_init }, + { .id = MC13892_GPO2, .init_data = &gpo2_init }, + { .id = MC13892_GPO3, .init_data = &gpo3_init }, + { .id = MC13892_GPO4, .init_data = &gpo4_init }, + { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init }, + { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init }, + { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init }, +}; + +static struct mc13xxx_platform_data mx51_efika_mc13892_data = { + .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR, + .num_regulators = ARRAY_SIZE(mx51_efika_regulators), + .regulators = mx51_efika_regulators, +}; + +static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { + { + .modalias = "m25p80", + .max_speed_hz = 25000000, + .bus_num = 0, + .chip_select = 1, + .platform_data = &mx51_efika_spi_flash_data, + .irq = -1, + }, + { + .modalias = "mc13892", + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 0, + .platform_data = &mx51_efika_mc13892_data, + .irq = gpio_to_irq(EFIKAMX_PMIC), + }, +}; + +static int mx51_efika_spi_cs[] = { + EFIKAMX_SPI_CS0, + EFIKAMX_SPI_CS1, +}; + +static const struct spi_imx_master mx51_efika_spi_pdata __initconst = { + .chipselect = mx51_efika_spi_cs, + .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs), +}; + +void __init efika_board_common_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51efika_pads, + ARRAY_SIZE(mx51efika_pads)); + imx51_add_imx_uart(0, &uart_pdata); + mx51_efika_usb(); + imx51_add_sdhci_esdhc_imx(0, NULL); + + /* FIXME: comes from original code. check this. */ + if (mx51_revision() < IMX_CHIP_REVISION_2_0) + sw2_init.constraints.state_mem.uV = 1100000; + else if (mx51_revision() == IMX_CHIP_REVISION_2_0) { + sw2_init.constraints.state_mem.uV = 1250000; + sw1_init.constraints.state_mem.uV = 1000000; + } + if (machine_is_mx51_efikasb()) + vgen1_init.constraints.max_uV = 1200000; + + gpio_request(EFIKAMX_PMIC, "pmic irq"); + gpio_direction_input(EFIKAMX_PMIC); + spi_register_board_info(mx51_efika_spi_board_info, + ARRAY_SIZE(mx51_efika_spi_board_info)); + imx51_add_ecspi(0, &mx51_efika_spi_pdata); + +#if defined(CONFIG_CPU_FREQ_IMX) + get_cpu_op = mx51_get_cpu_op; +#endif +} + |