diff options
Diffstat (limited to 'arch/arm/mach-ixp4xx')
45 files changed, 4124 insertions, 669 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index db8b5fe06c0..c342dc4e8a4 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -1,9 +1,5 @@ if ARCH_IXP4XX -config ARCH_SUPPORTS_BIG_ENDIAN - bool - default y - menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" @@ -78,6 +74,12 @@ config MACH_IXDP465 IXDP465 Development Platform (Also known as BMP). For more information on this platform, see <file:Documentation/arm/IXP4xx>. +config MACH_GORAMO_MLR + bool "GORAMO Multi Link Router" + help + Say 'Y' here if you want your kernel to support GORAMO + MultiLink router. + config MACH_KIXRP435 bool "KIXRP435" help @@ -134,6 +136,14 @@ config MACH_FSG FSG-3 device. For more information on this platform, see http://www.nslu2-linux.org/wiki/FSG3/HomePage +config MACH_ARCOM_VULCAN + bool + prompt "Arcom/Eurotech Vulcan" + select PCI + help + Say 'Y' here if you want your kernel to support Arcom's + Vulcan board. + # # Certain registers and IRQs are only enabled if supporting IXP465 CPUs # @@ -165,12 +175,26 @@ config MACH_GTWX5715 "High Speed" UART is n/c (as far as I can tell) 20 Pin ARM/Xscale JTAG interface on J2 -comment "IXP4xx Options" +config MACH_DEVIXP + bool "Omicron DEVIXP" + help + Say 'Y' here if you want your kernel to support the DEVIXP + board from OMICRON electronics GmbH. -config DMABOUNCE - bool - default y - depends on PCI +config MACH_MICCPT + bool "Omicron MICCPT" + select PCI + help + Say 'Y' here if you want your kernel to support the MICCPT + board from OMICRON electronics GmbH. + +config MACH_MIC256 + bool "Omicron MIC256" + help + Say 'Y' here if you want your kernel to support the MIC256 + board from OMICRON electronics GmbH. + +comment "IXP4xx Options" config IXP4XX_INDIRECT_PCI bool "Use indirect PCI memory access" @@ -178,21 +202,21 @@ config IXP4XX_INDIRECT_PCI help IXP4xx provides two methods of accessing PCI memory space: - 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB). + 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). To access PCI via this space, we simply ioremap() the BAR into the kernel and we can use the standard read[bwl]/write[bwl] macros. This is the preferred method due to speed but it - limits the system to just 64MB of PCI memory. This can be + limits the system to just 64MB of PCI memory. This can be problematic if using video cards and other memory-heavy devices. - - 2) If > 64MB of memory space is required, the IXP4xx can be - configured to use indirect registers to access PCI This allows - for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. - The disadvantage of this is that every PCI access requires - three local register accesses plus a spinlock, but in some - cases the performance hit is acceptable. In addition, you cannot - mmap() PCI devices in this case due to the indirect nature - of the PCI window. + + 2) If > 64MB of memory space is required, the IXP4xx can be + configured to use indirect registers to access the whole PCI + memory space. This currently allows for up to 1 GB (0x10000000 + to 0x4FFFFFFF) of memory on the bus. The disadvantage of this + is that every PCI access requires three local register accesses + plus a spinlock, but in some cases the performance hit is + acceptable. In addition, you cannot mmap() PCI devices in this + case due to the indirect nature of the PCI window. By default, the direct method is used. Choose this option if you need to use the indirect method instead. If you don't know @@ -206,7 +230,6 @@ config IXP4XX_QMGR config IXP4XX_NPE tristate "IXP4xx Network Processor Engine support" - select HOTPLUG select FW_LOADER help This driver supports IXP4xx built-in network coprocessors diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 2e6bbf927a7..eded94c96dd 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -10,12 +10,14 @@ obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o +obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o +obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o obj-y += common.o @@ -24,12 +26,17 @@ obj-$(CONFIG_MACH_AVILA) += avila-setup.o obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o +obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o +obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o +obj-$(CONFIG_MACH_MIC256) += omixp-setup.o obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o +obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o +obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o diff --git a/arch/arm/mach-ixp4xx/Makefile.boot b/arch/arm/mach-ixp4xx/Makefile.boot index d84c5807a43..9c7af91d93d 100644 --- a/arch/arm/mach-ixp4xx/Makefile.boot +++ b/arch/arm/mach-ixp4xx/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c index c6e044befcc..548c7d43ade 100644 --- a/arch/arm/mach-ixp4xx/avila-pci.c +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -22,48 +22,52 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/delay.h> - #include <asm/mach/pci.h> #include <asm/irq.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach-types.h> +#define AVILA_MAX_DEV 4 +#define LOFT_MAX_DEV 6 +#define IRQ_LINES 4 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 + void __init avila_pci_preinit(void) { - set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW); - + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init avila_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[AVILA_PCI_IRQ_LINES] = { - IRQ_AVILA_PCI_INTA, - IRQ_AVILA_PCI_INTB, - IRQ_AVILA_PCI_INTC, - IRQ_AVILA_PCI_INTD + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) }; - int irq = -1; - if (slot >= 1 && - slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) && - pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) { - irq = pci_irq_table[(slot + pin - 2) % 4]; - } + slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) && + pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % 4]; - return irq; + return -1; } struct hw_pci avila_pci __initdata = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = avila_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = avila_map_irq, }; @@ -75,4 +79,3 @@ int __init avila_pci_init(void) } subsys_initcall(avila_pci_init); - diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index e38f45fa58a..6beec150c06 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -17,18 +17,19 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <linux/i2c-gpio.h> - #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#define AVILA_SDA_PIN 7 +#define AVILA_SCL_PIN 6 + static struct flash_platform_data avila_flash_data = { .map_name = "cfi_probe", .width = 2, @@ -163,13 +164,16 @@ static void __init avila_init(void) MACHINE_START(AVILA, "Gateworks Avila Network Platform") /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = avila_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END /* @@ -180,13 +184,16 @@ MACHINE_END #ifdef CONFIG_MACH_LOFT MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = avila_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 64be341109b..4977296f0c7 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -25,14 +25,15 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/device.h> +#include <linux/io.h> +#include <linux/export.h> #include <asm/dma-mapping.h> -#include <asm/io.h> +#include <asm/cputype.h> #include <asm/irq.h> #include <asm/sizes.h> -#include <asm/system.h> #include <asm/mach/pci.h> -#include <asm/hardware.h> +#include <mach/hardware.h> /* @@ -53,7 +54,7 @@ unsigned long ixp4xx_pci_reg_base = 0; * these transactions are atomic or we will end up * with corrupt data on the bus or in a driver. */ -static DEFINE_SPINLOCK(ixp4xx_pci_lock); +static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock); /* * Read from PCI config space @@ -61,10 +62,10 @@ static DEFINE_SPINLOCK(ixp4xx_pci_lock); static void crp_read(u32 ad_cbe, u32 *data) { unsigned long flags; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_CRP_AD_CBE = ad_cbe; *data = *PCI_CRP_RDATA; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); } /* @@ -73,10 +74,10 @@ static void crp_read(u32 ad_cbe, u32 *data) static void crp_write(u32 ad_cbe, u32 data) { unsigned long flags; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe; *PCI_CRP_WDATA = data; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); } static inline int check_master_abort(void) @@ -100,7 +101,7 @@ int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data) int retval = 0; int i; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_NP_AD = addr; @@ -117,7 +118,7 @@ int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data) if(check_master_abort()) retval = 1; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); return retval; } @@ -126,7 +127,7 @@ int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data) unsigned long flags; int retval = 0; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_NP_AD = addr; @@ -139,7 +140,7 @@ int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data) if(check_master_abort()) retval = 1; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); return retval; } @@ -148,7 +149,7 @@ int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data) unsigned long flags; int retval = 0; - spin_lock_irqsave(&ixp4xx_pci_lock, flags); + raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); *PCI_NP_AD = addr; @@ -161,7 +162,7 @@ int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data) if(check_master_abort()) retval = 1; - spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); + raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); return retval; } @@ -314,67 +315,20 @@ static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *r return 0; } - -/* - * Setup DMA mask to 64MB on PCI devices. Ignore all other devices. - */ -static int ixp4xx_pci_platform_notify(struct device *dev) -{ - if(dev->bus == &pci_bus_type) { - *dev->dma_mask = SZ_64M - 1; - dev->coherent_dma_mask = SZ_64M - 1; - dmabounce_register_dev(dev, 2048, 4096); - } - return 0; -} - -static int ixp4xx_pci_platform_notify_remove(struct device *dev) -{ - if(dev->bus == &pci_bus_type) { - dmabounce_unregister_dev(dev); - } - return 0; -} - -int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M); -} - -/* - * Only first 64MB of memory can be accessed via PCI. - * We use GFP_DMA to allocate safe buffers to do map/unmap. - * This is really ugly and we need a better way of specifying - * DMA-capable regions of memory. - */ -void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size, - unsigned long *zhole_size) -{ - unsigned int sz = SZ_64M >> PAGE_SHIFT; - - /* - * Only adjust if > 64M on current system - */ - if (node || (zone_size[0] <= sz)) - return; - - zone_size[1] = zone_size[0] - sz; - zone_size[0] = sz; - zhole_size[1] = zhole_size[0]; - zhole_size[0] = 0; -} - void __init ixp4xx_pci_preinit(void) -{ - unsigned long processor_id; - - asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :); +{ + unsigned long cpuid = read_cpuid_id(); +#ifdef CONFIG_IXP4XX_INDIRECT_PCI + pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */ +#else + pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */ +#endif /* * Determine which PCI read method to use. * Rev 0 IXP425 requires workaround. */ - if (!(processor_id & 0xf) && cpu_is_ixp42x()) { + if (!(cpuid & 0xf) && cpu_is_ixp42x()) { printk("PCI: IXP42x A0 silicon detected - " "PCI Non-Prefetch Workaround Enabled\n"); ixp4xx_pci_read = ixp4xx_pci_read_errata; @@ -383,21 +337,22 @@ void __init ixp4xx_pci_preinit(void) /* hook in our fault handler for PCI errors */ - hook_fault_code(16+6, abort_handler, SIGBUS, "imprecise external abort"); + hook_fault_code(16+6, abort_handler, SIGBUS, 0, + "imprecise external abort"); pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n"); - /* + /* * We use identity AHB->PCI address translation * in the 0x48000000 to 0x4bffffff address space */ *PCI_PCIMEMBASE = 0x48494A4B; - /* + /* * We also use identity PCI->AHB address translation * in 4 16MB BARs that begin at the physical memory start */ - *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + + *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + ((PHYS_OFFSET & 0xFF000000) >> 8) + ((PHYS_OFFSET & 0xFF000000) >> 16) + ((PHYS_OFFSET & 0xFF000000) >> 24) + @@ -409,23 +364,26 @@ void __init ixp4xx_pci_preinit(void) pr_debug("setup BARs in controller\n"); /* - * We configure the PCI inbound memory windows to be + * We configure the PCI inbound memory windows to be * 1:1 mapped to SDRAM */ - local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET + 0x00000000); - local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + 0x01000000); - local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + 0x02000000); - local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + 0x03000000); + local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET); + local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M); + local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M); + local_write_config(PCI_BASE_ADDRESS_3, 4, + PHYS_OFFSET + SZ_32M + SZ_16M); /* - * Enable CSR window at 0xff000000. + * Enable CSR window at 64 MiB to allow PCI masters + * to continue prefetching past 64 MiB boundary. */ - local_write_config(PCI_BASE_ADDRESS_4, 4, 0xff000008); + local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M); /* * Enable the IO window to be way up high, at 0xfffffc00 */ local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01); + local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */ } else { printk("PCI: IXP4xx is target - No bus scan performed\n"); } @@ -481,57 +439,17 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) res[1].name = "PCI Memory Space"; res[1].start = PCIBIOS_MIN_MEM; -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - res[1].end = 0x4bffffff; -#else - res[1].end = 0x4fffffff; -#endif + res[1].end = PCIBIOS_MAX_MEM; res[1].flags = IORESOURCE_MEM; request_resource(&ioport_resource, &res[0]); request_resource(&iomem_resource, &res[1]); - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - platform_notify = ixp4xx_pci_platform_notify; - platform_notify_remove = ixp4xx_pci_platform_notify_remove; + pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); return 1; } -struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys) -{ - return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys); -} - -/* - * We override these so we properly do dmabounce otherwise drivers - * are able to set the dma_mask to 0xffffffff and we can no longer - * trap bounces. :( - * - * We just return true on everyhing except for < 64MB in which case - * we will fail miseralby and die since we can't handle that case. - */ -int -pci_set_dma_mask(struct pci_dev *dev, u64 mask) -{ - if (mask >= SZ_64M - 1 ) - return 0; - - return -EIO; -} - -int -pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) -{ - if (mask >= SZ_64M - 1 ) - return 0; - - return -EIO; -} - EXPORT_SYMBOL(ixp4xx_pci_read); EXPORT_SYMBOL(ixp4xx_pci_write); - diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 3947c506b4f..fc4b7b24265 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -17,32 +17,45 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/serial.h> -#include <linux/sched.h> #include <linux/tty.h> #include <linux/platform_device.h> #include <linux/serial_core.h> -#include <linux/bootmem.h> #include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/time.h> -#include <linux/timex.h> #include <linux/clocksource.h> #include <linux/clockchips.h> - -#include <asm/arch/udc.h> -#include <asm/hardware.h> +#include <linux/io.h> +#include <linux/export.h> +#include <linux/gpio.h> +#include <linux/cpu.h> +#include <linux/pci.h> +#include <linux/sched_clock.h> +#include <mach/udc.h> +#include <mach/hardware.h> +#include <mach/io.h> #include <asm/uaccess.h> -#include <asm/io.h> #include <asm/pgtable.h> #include <asm/page.h> #include <asm/irq.h> - +#include <asm/system_misc.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -static int __init ixp4xx_clocksource_init(void); -static int __init ixp4xx_clockevent_init(void); +#define IXP4XX_TIMER_FREQ 66666000 + +/* + * The timer register doesn't allow to specify the two least significant bits of + * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is + * the best value with the two least significant bits unset. + */ +#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \ + (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \ + (IXP4XX_OST_RELOAD_MASK + 1) + +static void __init ixp4xx_clocksource_init(void); +static void __init ixp4xx_clockevent_init(void); static struct clock_event_device clockevent_ixp4xx; /************************************************************************* @@ -50,29 +63,26 @@ static struct clock_event_device clockevent_ixp4xx; *************************************************************************/ static struct map_desc ixp4xx_io_desc[] __initdata = { { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */ - .virtual = IXP4XX_PERIPHERAL_BASE_VIRT, + .virtual = (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT, .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS), .length = IXP4XX_PERIPHERAL_REGION_SIZE, .type = MT_DEVICE }, { /* Expansion Bus Config Registers */ - .virtual = IXP4XX_EXP_CFG_BASE_VIRT, + .virtual = (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT, .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), .length = IXP4XX_EXP_CFG_REGION_SIZE, .type = MT_DEVICE }, { /* PCI Registers */ - .virtual = IXP4XX_PCI_CFG_BASE_VIRT, + .virtual = (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT, .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE - }, -#ifdef CONFIG_DEBUG_LL - { /* Debug UART mapping */ - .virtual = IXP4XX_DEBUG_UART_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), - .length = IXP4XX_DEBUG_UART_REGION_SIZE, + }, { /* Queue Manager */ + .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS), + .length = IXP4XX_QMGR_REGION_SIZE, .type = MT_DEVICE - } -#endif + }, }; void __init ixp4xx_map_io(void) @@ -80,6 +90,44 @@ void __init ixp4xx_map_io(void) iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc)); } +/* + * GPIO-functions + */ +/* + * The following converted to the real HW bits the gpio_line_config + */ +/* GPIO pin types */ +#define IXP4XX_GPIO_OUT 0x1 +#define IXP4XX_GPIO_IN 0x2 + +/* GPIO signal types */ +#define IXP4XX_GPIO_LOW 0 +#define IXP4XX_GPIO_HIGH 1 + +/* GPIO Clocks */ +#define IXP4XX_GPIO_CLK_0 14 +#define IXP4XX_GPIO_CLK_1 15 + +static void gpio_line_config(u8 line, u32 direction) +{ + if (direction == IXP4XX_GPIO_IN) + *IXP4XX_GPIO_GPOER |= (1 << line); + else + *IXP4XX_GPIO_GPOER &= ~(1 << line); +} + +static void gpio_line_get(u8 line, int *value) +{ + *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1; +} + +static void gpio_line_set(u8 line, int value) +{ + if (value == IXP4XX_GPIO_HIGH) + *IXP4XX_GPIO_GPOUTR |= (1 << line); + else if (value == IXP4XX_GPIO_LOW) + *IXP4XX_GPIO_GPOUTR &= ~(1 << line); +} /************************************************************************* * IXP4xx chipset IRQ handling @@ -105,7 +153,7 @@ static signed char irq2gpio[32] = { 7, 8, 9, 10, 11, 12, -1, -1, }; -int gpio_to_irq(int gpio) +static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) { int irq; @@ -115,22 +163,10 @@ int gpio_to_irq(int gpio) } return -EINVAL; } -EXPORT_SYMBOL(gpio_to_irq); -int irq_to_gpio(int irq) +static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type) { - int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL; - - if (gpio == -1) - return -EINVAL; - - return gpio; -} -EXPORT_SYMBOL(irq_to_gpio); - -static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) -{ - int line = irq2gpio[irq]; + int line = irq2gpio[d->irq]; u32 int_style; enum ixp4xx_irq_type irq_type; volatile u32 *int_reg; @@ -167,9 +203,9 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) } if (irq_type == IXP4XX_IRQ_EDGE) - ixp4xx_irq_edge |= (1 << irq); + ixp4xx_irq_edge |= (1 << d->irq); else - ixp4xx_irq_edge &= ~(1 << irq); + ixp4xx_irq_edge &= ~(1 << d->irq); if (line >= 8) { /* pins 8-15 */ line -= 8; @@ -188,22 +224,22 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); /* Configure the line as an input */ - gpio_line_config(irq2gpio[irq], IXP4XX_GPIO_IN); + gpio_line_config(irq2gpio[d->irq], IXP4XX_GPIO_IN); return 0; } -static void ixp4xx_irq_mask(unsigned int irq) +static void ixp4xx_irq_mask(struct irq_data *d) { - if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32) - *IXP4XX_ICMR2 &= ~(1 << (irq - 32)); + if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32) + *IXP4XX_ICMR2 &= ~(1 << (d->irq - 32)); else - *IXP4XX_ICMR &= ~(1 << irq); + *IXP4XX_ICMR &= ~(1 << d->irq); } -static void ixp4xx_irq_ack(unsigned int irq) +static void ixp4xx_irq_ack(struct irq_data *d) { - int line = (irq < 32) ? irq2gpio[irq] : -1; + int line = (d->irq < 32) ? irq2gpio[d->irq] : -1; if (line >= 0) *IXP4XX_GPIO_GPISR = (1 << line); @@ -213,29 +249,35 @@ static void ixp4xx_irq_ack(unsigned int irq) * Level triggered interrupts on GPIO lines can only be cleared when the * interrupt condition disappears. */ -static void ixp4xx_irq_unmask(unsigned int irq) +static void ixp4xx_irq_unmask(struct irq_data *d) { - if (!(ixp4xx_irq_edge & (1 << irq))) - ixp4xx_irq_ack(irq); + if (!(ixp4xx_irq_edge & (1 << d->irq))) + ixp4xx_irq_ack(d); - if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32) - *IXP4XX_ICMR2 |= (1 << (irq - 32)); + if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32) + *IXP4XX_ICMR2 |= (1 << (d->irq - 32)); else - *IXP4XX_ICMR |= (1 << irq); + *IXP4XX_ICMR |= (1 << d->irq); } static struct irq_chip ixp4xx_irq_chip = { .name = "IXP4xx", - .ack = ixp4xx_irq_ack, - .mask = ixp4xx_irq_mask, - .unmask = ixp4xx_irq_unmask, - .set_type = ixp4xx_set_irq_type, + .irq_ack = ixp4xx_irq_ack, + .irq_mask = ixp4xx_irq_mask, + .irq_unmask = ixp4xx_irq_unmask, + .irq_set_type = ixp4xx_set_irq_type, }; void __init ixp4xx_init_irq(void) { int i = 0; + /* + * ixp4xx does not implement the XScale PWRMODE register + * so it must not call cpu_do_idle(). + */ + cpu_idle_poll_ctrl(true); + /* Route all sources to IRQ instead of FIQ */ *IXP4XX_ICLR = 0x0; @@ -252,8 +294,8 @@ void __init ixp4xx_init_irq(void) /* Default to all level triggered */ for(i = 0; i < NR_IRQS; i++) { - set_irq_chip(i, &ixp4xx_irq_chip); - set_irq_handler(i, handle_level_irq); + irq_set_chip_and_handler(i, &ixp4xx_irq_chip, + handle_level_irq); set_irq_flags(i, IRQF_VALID); } } @@ -267,7 +309,7 @@ void __init ixp4xx_init_irq(void) static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id) { - struct clock_event_device *evt = &clockevent_ixp4xx; + struct clock_event_device *evt = dev_id; /* Clear Pending Interrupt by writing '1' to it */ *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; @@ -279,8 +321,9 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id) static struct irqaction ixp4xx_timer_irq = { .name = "timer1", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = ixp4xx_timer_interrupt, + .dev_id = &clockevent_ixp4xx, }; void __init ixp4xx_timer_init(void) @@ -301,10 +344,6 @@ void __init ixp4xx_timer_init(void) ixp4xx_clockevent_init(); } -struct sys_timer ixp4xx_timer = { - .init = ixp4xx_timer_init, -}; - static struct pxa2xx_udc_mach_info ixp4xx_udc_info; void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info) @@ -374,12 +413,56 @@ static struct platform_device *ixp46x_devices[] __initdata = { unsigned long ixp4xx_exp_bus_size; EXPORT_SYMBOL(ixp4xx_exp_bus_size); +static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + gpio_line_config(gpio, IXP4XX_GPIO_IN); + + return 0; +} + +static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, + int level) +{ + gpio_line_set(gpio, level); + gpio_line_config(gpio, IXP4XX_GPIO_OUT); + + return 0; +} + +static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + int value; + + gpio_line_get(gpio, &value); + + return value; +} + +static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, + int value) +{ + gpio_line_set(gpio, value); +} + +static struct gpio_chip ixp4xx_gpio_chip = { + .label = "IXP4XX_GPIO_CHIP", + .direction_input = ixp4xx_gpio_direction_input, + .direction_output = ixp4xx_gpio_direction_output, + .get = ixp4xx_gpio_get_value, + .set = ixp4xx_gpio_set_value, + .to_irq = ixp4xx_gpio_to_irq, + .base = 0, + .ngpio = 16, +}; + void __init ixp4xx_sys_init(void) { ixp4xx_exp_bus_size = SZ_16M; platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); + gpiochip_add(&ixp4xx_gpio_chip); + if (cpu_is_ixp46x()) { int region; @@ -399,31 +482,30 @@ void __init ixp4xx_sys_init(void) } /* - * clocksource + * sched_clock() */ -cycle_t ixp4xx_get_cycles(void) +static u64 notrace ixp4xx_read_sched_clock(void) { return *IXP4XX_OSTS; } -static struct clocksource clocksource_ixp4xx = { - .name = "OSTS", - .rating = 200, - .read = ixp4xx_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; +/* + * clocksource + */ -unsigned long ixp4xx_timer_freq = FREQ; -static int __init ixp4xx_clocksource_init(void) +static cycle_t ixp4xx_clocksource_read(struct clocksource *c) { - clocksource_ixp4xx.mult = - clocksource_hz2mult(ixp4xx_timer_freq, - clocksource_ixp4xx.shift); - clocksource_register(&clocksource_ixp4xx); + return *IXP4XX_OSTS; +} - return 0; +unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; +EXPORT_SYMBOL(ixp4xx_timer_freq); +static void __init ixp4xx_clocksource_init(void) +{ + sched_clock_register(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq); + + clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, + ixp4xx_clocksource_read); } /* @@ -447,7 +529,7 @@ static void ixp4xx_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK; + osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK; opts = IXP4XX_OST_ENABLE; break; case CLOCK_EVT_MODE_ONESHOT: @@ -474,21 +556,117 @@ static struct clock_event_device clockevent_ixp4xx = { .name = "ixp4xx timer1", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 200, - .shift = 24, .set_mode = ixp4xx_set_mode, .set_next_event = ixp4xx_set_next_event, }; -static int __init ixp4xx_clockevent_init(void) +static void __init ixp4xx_clockevent_init(void) { - clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC, - clockevent_ixp4xx.shift); - clockevent_ixp4xx.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx); - clockevent_ixp4xx.min_delta_ns = - clockevent_delta2ns(0xf, &clockevent_ixp4xx); - clockevent_ixp4xx.cpumask = cpumask_of_cpu(0); + clockevent_ixp4xx.cpumask = cpumask_of(0); + clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ, + 0xf, 0xfffffffe); +} + +void ixp4xx_restart(enum reboot_mode mode, const char *cmd) +{ + if (mode == REBOOT_SOFT) { + /* Jump into ROM at address 0 */ + soft_restart(0); + } else { + /* Use on-chip reset capability */ + + /* set the "key" register to enable access to + * "timer" and "enable" registers + */ + *IXP4XX_OSWK = IXP4XX_WDT_KEY; + + /* write 0 to the timer register for an immediate reset */ + *IXP4XX_OSWT = 0; + + *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE; + } +} + +#ifdef CONFIG_PCI +static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) +{ + return (dma_addr + size) > SZ_64M; +} + +static int ixp4xx_platform_notify_remove(struct device *dev) +{ + if (dev_is_pci(dev)) + dmabounce_unregister_dev(dev); - clockevents_register_device(&clockevent_ixp4xx); return 0; } +#endif + +/* + * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things. + */ +static int ixp4xx_platform_notify(struct device *dev) +{ + dev->dma_mask = &dev->coherent_dma_mask; + +#ifdef CONFIG_PCI + if (dev_is_pci(dev)) { + dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */ + dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); + return 0; + } +#endif + + dev->coherent_dma_mask = DMA_BIT_MASK(32); + return 0; +} + +int dma_set_coherent_mask(struct device *dev, u64 mask) +{ + if (dev_is_pci(dev)) + mask &= DMA_BIT_MASK(28); /* 64 MB */ + + if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) { + dev->coherent_dma_mask = mask; + return 0; + } + + return -EIO; /* device wanted sub-64MB mask */ +} +EXPORT_SYMBOL(dma_set_coherent_mask); + +#ifdef CONFIG_IXP4XX_INDIRECT_PCI +/* + * In the case of using indirect PCI, we simply return the actual PCI + * address and our read/write implementation use that to drive the + * access registers. If something outside of PCI is ioremap'd, we + * fallback to the default. + */ + +static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size, + unsigned int mtype, void *caller) +{ + if (!is_pci_memory(addr)) + return __arm_ioremap_caller(addr, size, mtype, caller); + + return (void __iomem *)addr; +} + +static void ixp4xx_iounmap(void __iomem *addr) +{ + if (!is_pci_memory((__force u32)addr)) + __iounmap(addr); +} +#endif + +void __init ixp4xx_init_early(void) +{ + platform_notify = ixp4xx_platform_notify; +#ifdef CONFIG_PCI + platform_notify_remove = ixp4xx_platform_notify_remove; +#endif +#ifdef CONFIG_IXP4XX_INDIRECT_PCI + arch_ioremap_caller = ixp4xx_ioremap_caller; + arch_iounmap = ixp4xx_iounmap; +#endif +} diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index be4f4a208b9..5d14ce2aee6 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -18,36 +18,39 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> - #include <asm/mach/pci.h> +#define SLOT0_DEVID 14 +#define SLOT1_DEVID 15 + +/* PCI controller GPIO to IRQ pin mappings */ +#define SLOT0_INTA 6 +#define SLOT1_INTA 11 + void __init coyote_pci_preinit(void) { - set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW); - + irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init coyote_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - if (slot == COYOTE_PCI_SLOT0_DEVID) - return IRQ_COYOTE_PCI_SLOT0; - else if (slot == COYOTE_PCI_SLOT1_DEVID) - return IRQ_COYOTE_PCI_SLOT1; + if (slot == SLOT0_DEVID) + return IXP4XX_GPIO_IRQ(SLOT0_INTA); + else if (slot == SLOT1_DEVID) + return IXP4XX_GPIO_IRQ(SLOT1_INTA); else return -1; } struct hw_pci coyote_pci __initdata = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = coyote_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = coyote_map_irq, }; diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 13f8a7ac3ba..820cae8608f 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -14,17 +14,25 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3) +#define COYOTE_IDE_BASE_VIRT 0xFFFE1000 +#define COYOTE_IDE_REGION_SIZE 0x1000 + +#define COYOTE_IDE_DATA_PORT 0xFFFE10E0 +#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC +#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2 +#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 + static struct flash_platform_data coyote_flash_data = { .map_name = "cfi_probe", .width = 2, @@ -101,13 +109,16 @@ static void __init coyote_init(void) #ifdef CONFIG_ARCH_ADI_COYOTE MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = coyote_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END #endif @@ -118,13 +129,13 @@ MACHINE_END #ifdef CONFIG_MACH_IXDPG425 MACHINE_START(IXDPG425, "Intel IXDPG425") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = coyote_init, + .restart = ixp4xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c index 926d15f885f..8dca7693772 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-pci.c +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -19,47 +19,52 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/mach/pci.h> #include <asm/mach-types.h> +#define MAX_DEV 4 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 +#define INTE 7 +#define INTF 6 + void __init dsmg600_pci_preinit(void) { - set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW); - + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTF), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init dsmg600_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] = - { - { IRQ_DSMG600_PCI_INTE, -1, -1 }, - { IRQ_DSMG600_PCI_INTA, -1, -1 }, - { IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD }, - { IRQ_DSMG600_PCI_INTF, -1, -1 }, + static int pci_irq_table[MAX_DEV][IRQ_LINES] = { + { IXP4XX_GPIO_IRQ(INTE), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTA), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTB), IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) }, + { IXP4XX_GPIO_IRQ(INTF), -1, -1 }, }; - int irq = -1; - - if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV && - pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES) - irq = pci_irq_table[slot-1][pin-1]; + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[slot - 1][pin - 1]; - return irq; + return -1; } struct hw_pci __initdata dsmg600_pci = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = dsmg600_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = dsmg600_map_irq, }; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index a51bfa6978b..43ee06d3abe 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -16,7 +16,7 @@ * Author: Rod Whitby <rod@whitby.id.au> * Maintainers: http://www.nslu2-linux.org/ */ - +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/jiffies.h> #include <linux/timer.h> @@ -26,12 +26,31 @@ #include <linux/reboot.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <asm/gpio.h> + +#define DSMG600_SDA_PIN 5 +#define DSMG600_SCL_PIN 4 + +/* DSM-G600 Timer Setting */ +#define DSMG600_FREQ 66000000 + +/* Buttons */ +#define DSMG600_PB_GPIO 15 /* power button */ +#define DSMG600_RB_GPIO 3 /* reset button */ + +/* Power control */ +#define DSMG600_PO_GPIO 2 /* power off */ + +/* LEDs */ +#define DSMG600_LED_PWR_GPIO 0 +#define DSMG600_LED_WLAN_GPIO 14 static struct flash_platform_data dsmg600_flash_data = { .map_name = "cfi_probe", @@ -143,11 +162,8 @@ static struct platform_device *dsmg600_devices[] __initdata = { static void dsmg600_power_off(void) { - /* enable the pwr cntl gpio */ - gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT); - - /* poweroff */ - gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); + /* enable the pwr cntl and drive it high */ + gpio_direction_output(DSMG600_PO_GPIO, 1); } /* This is used to make sure the power-button pusher is serious. The button @@ -184,7 +200,7 @@ static void dsmg600_power_handler(unsigned long data) ctrl_alt_del(); /* Change the state of the power LED to "blink" */ - gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + gpio_set_value(DSMG600_LED_PWR_GPIO, 0); } else { power_button_countdown = PBUTTON_HOLDDOWN_COUNT; } @@ -210,9 +226,38 @@ static void __init dsmg600_timer_init(void) ixp4xx_timer_init(); } -static struct sys_timer dsmg600_timer = { - .init = dsmg600_timer_init, -}; +static int __init dsmg600_gpio_init(void) +{ + if (!machine_is_dsmg600()) + return 0; + + gpio_request(DSMG600_RB_GPIO, "reset button"); + if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler, + IRQF_TRIGGER_LOW, "DSM-G600 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(DSMG600_RB_GPIO)); + } + + /* + * The power button on the D-Link DSM-G600 is on GPIO 15, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Make sure that the power button GPIO is set up as an input */ + gpio_request(DSMG600_PB_GPIO, "power button"); + gpio_direction_input(DSMG600_PB_GPIO); + /* Request poweroff GPIO line */ + gpio_request(DSMG600_PO_GPIO, "power off button"); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); + return 0; +} +device_initcall(dsmg600_gpio_init); static void __init dsmg600_init(void) { @@ -237,36 +282,18 @@ static void __init dsmg600_init(void) platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices)); pm_power_off = dsmg600_power_off; - - if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "DSM-G600 reset button", NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - gpio_to_irq(DSMG600_RB_GPIO)); - } - - /* The power button on the D-Link DSM-G600 is on GPIO 15, but - * it cannot handle interrupts on that GPIO line. So we'll - * have to poll it with a kernel timer. - */ - - /* Make sure that the power button GPIO is set up as an input */ - gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN); - - /* Set the initial value for the power button IRQ handler */ - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - - mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); } MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &dsmg600_timer, + .init_time = dsmg600_timer_init, .init_machine = dsmg600_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c index ca12a9ca083..fd4a8625b4a 100644 --- a/arch/arm/mach-ixp4xx/fsg-pci.c +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -19,33 +19,38 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/mach/pci.h> #include <asm/mach-types.h> +#define MAX_DEV 3 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 6 +#define INTB 7 +#define INTC 5 + void __init fsg_pci_preinit(void) { - set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init fsg_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[FSG_PCI_IRQ_LINES] = { - IRQ_FSG_PCI_INTC, - IRQ_FSG_PCI_INTB, - IRQ_FSG_PCI_INTA, + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTA), }; int irq = -1; - slot = slot - 11; + slot -= 11; - if (slot >= 1 && slot <= FSG_PCI_MAX_DEV && - pin >= 1 && pin <= FSG_PCI_IRQ_LINES) - irq = pci_irq_table[(slot - 1)]; + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + irq = pci_irq_table[slot - 1]; printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, irq); @@ -54,10 +59,9 @@ static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin) struct hw_pci fsg_pci __initdata = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = fsg_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = fsg_map_irq, }; diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 0db3a909ae6..5c4b0c4a1b3 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -14,7 +14,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/serial.h> @@ -23,12 +23,17 @@ #include <linux/reboot.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> - +#include <linux/io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/io.h> -#include <asm/gpio.h> + +#define FSG_SDA_PIN 12 +#define FSG_SCL_PIN 13 + +#define FSG_SB_GPIO 4 /* sync button */ +#define FSG_RB_GPIO 9 /* reset button */ +#define FSG_UB_GPIO 10 /* usb button */ static struct flash_platform_data fsg_flash_data = { .map_name = "cfi_probe", @@ -64,7 +69,7 @@ static struct platform_device fsg_i2c_gpio = { static struct i2c_board_info __initdata fsg_i2c_board_info [] = { { - I2C_BOARD_INFO("rtc-isl1208", 0x6f), + I2C_BOARD_INFO("isl1208", 0x6f), }, }; @@ -177,9 +182,7 @@ static irqreturn_t fsg_reset_handler(int irq, void *dev_id) static void __init fsg_init(void) { - DECLARE_MAC_BUF(mac_buf); uint8_t __iomem *f; - int i; ixp4xx_sys_init(); @@ -205,16 +208,14 @@ static void __init fsg_init(void) platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices)); if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "FSG reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "FSG reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(FSG_RB_GPIO)); } if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "FSG power button", NULL) < 0) { + IRQF_TRIGGER_LOW, "FSG power button", NULL) < 0) { printk(KERN_DEBUG "Power Button IRQ %d not available\n", gpio_to_irq(FSG_SB_GPIO)); @@ -228,6 +229,7 @@ static void __init fsg_init(void) f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000); if (f) { #ifdef __ARMEB__ + int i; for (i = 0; i < 6; i++) { fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i); fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i); @@ -256,21 +258,24 @@ static void __init fsg_init(void) #endif iounmap(f); } - printk(KERN_INFO "FSG: Using MAC address %s for port 0\n", - print_mac(mac_buf, fsg_plat_eth[0].hwaddr)); - printk(KERN_INFO "FSG: Using MAC address %s for port 1\n", - print_mac(mac_buf, fsg_plat_eth[1].hwaddr)); + printk(KERN_INFO "FSG: Using MAC address %pM for port 0\n", + fsg_plat_eth[0].hwaddr); + printk(KERN_INFO "FSG: Using MAC address %pM for port 1\n", + fsg_plat_eth[1].hwaddr); } MACHINE_START(FSG, "Freecom FSG-3") /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = fsg_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c index afd1dc14e59..d9d6cc08970 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-pci.c +++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -23,19 +23,20 @@ #include <linux/irq.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach/pci.h> void __init gateway7001_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { if (slot == 1) return IRQ_IXP4XX_GPIO11; @@ -46,10 +47,9 @@ static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin) struct hw_pci gateway7001_pci __initdata = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = gateway7001_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = gateway7001_map_irq, }; diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index 37876832e14..3d24b3fcee8 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -17,12 +17,11 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -97,12 +96,15 @@ static void __init gateway7001_init(void) #ifdef CONFIG_MACH_GATEWAY7001 MACHINE_START(GATEWAY7001, "Gateway 7001 AP") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = gateway7001_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c new file mode 100644 index 00000000000..80bd9d6d04d --- /dev/null +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -0,0 +1,517 @@ +/* + * Goramo MultiLink router platform code + * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl> + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/hdlc.h> +#include <linux/i2c-gpio.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/serial_8250.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/pci.h> +#include <asm/system_info.h> + +#define SLOT_ETHA 0x0B /* IDSEL = AD21 */ +#define SLOT_ETHB 0x0C /* IDSEL = AD20 */ +#define SLOT_MPCI 0x0D /* IDSEL = AD19 */ +#define SLOT_NEC 0x0E /* IDSEL = AD18 */ + +/* GPIO lines */ +#define GPIO_SCL 0 +#define GPIO_SDA 1 +#define GPIO_STR 2 +#define GPIO_IRQ_NEC 3 +#define GPIO_IRQ_ETHA 4 +#define GPIO_IRQ_ETHB 5 +#define GPIO_HSS0_DCD_N 6 +#define GPIO_HSS1_DCD_N 7 +#define GPIO_UART0_DCD 8 +#define GPIO_UART1_DCD 9 +#define GPIO_HSS0_CTS_N 10 +#define GPIO_HSS1_CTS_N 11 +#define GPIO_IRQ_MPCI 12 +#define GPIO_HSS1_RTS_N 13 +#define GPIO_HSS0_RTS_N 14 +/* GPIO15 is not connected */ + +/* Control outputs from 74HC4094 */ +#define CONTROL_HSS0_CLK_INT 0 +#define CONTROL_HSS1_CLK_INT 1 +#define CONTROL_HSS0_DTR_N 2 +#define CONTROL_HSS1_DTR_N 3 +#define CONTROL_EXT 4 +#define CONTROL_AUTO_RESET 5 +#define CONTROL_PCI_RESET_N 6 +#define CONTROL_EEPROM_WC_N 7 + +/* offsets from start of flash ROM = 0x50000000 */ +#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */ +#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */ +#define CFG_REV 0x4C /* u32 */ +#define CFG_SDRAM_SIZE 0x50 /* u32 */ +#define CFG_SDRAM_CONF 0x54 /* u32 */ +#define CFG_SDRAM_MODE 0x58 /* u32 */ +#define CFG_SDRAM_REFRESH 0x5C /* u32 */ + +#define CFG_HW_BITS 0x60 /* u32 */ +#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */ +#define CFG_HW_HAS_PCI_SLOT 0x00000008 +#define CFG_HW_HAS_ETH0 0x00000010 +#define CFG_HW_HAS_ETH1 0x00000020 +#define CFG_HW_HAS_HSS0 0x00000040 +#define CFG_HW_HAS_HSS1 0x00000080 +#define CFG_HW_HAS_UART0 0x00000100 +#define CFG_HW_HAS_UART1 0x00000200 +#define CFG_HW_HAS_EEPROM 0x00000400 + +#define FLASH_CMD_READ_ARRAY 0xFF +#define FLASH_CMD_READ_ID 0x90 +#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */ + +static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */; +static u8 control_value; + +static void set_scl(u8 value) +{ + gpio_set_value(GPIO_SCL, !!value); + udelay(3); +} + +static void set_sda(u8 value) +{ + gpio_set_value(GPIO_SDA, !!value); + udelay(3); +} + +static void set_str(u8 value) +{ + gpio_set_value(GPIO_STR, !!value); + udelay(3); +} + +static inline void set_control(int line, int value) +{ + if (value) + control_value |= (1 << line); + else + control_value &= ~(1 << line); +} + + +static void output_control(void) +{ + int i; + + gpio_direction_output(GPIO_SCL, 1); + gpio_direction_output(GPIO_SDA, 1); + + for (i = 0; i < 8; i++) { + set_scl(0); + set_sda(control_value & (0x80 >> i)); /* MSB first */ + set_scl(1); /* active edge */ + } + + set_str(1); + set_str(0); + + set_scl(0); + set_sda(1); /* Be ready for START */ + set_scl(1); +} + + +static void (*set_carrier_cb_tab[2])(void *pdev, int carrier); + +static int hss_set_clock(int port, unsigned int clock_type) +{ + int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT; + + switch (clock_type) { + case CLOCK_DEFAULT: + case CLOCK_EXT: + set_control(ctrl_int, 0); + output_control(); + return CLOCK_EXT; + + case CLOCK_INT: + set_control(ctrl_int, 1); + output_control(); + return CLOCK_INT; + + default: + return -EINVAL; + } +} + +static irqreturn_t hss_dcd_irq(int irq, void *pdev) +{ + int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N)); + int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N); + set_carrier_cb_tab[port](pdev, !i); + return IRQ_HANDLED; +} + + +static int hss_open(int port, void *pdev, + void (*set_carrier_cb)(void *pdev, int carrier)) +{ + int i, irq; + + if (!port) + irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N); + else + irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N); + + i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N); + set_carrier_cb(pdev, !i); + + set_carrier_cb_tab[!!port] = set_carrier_cb; + + if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) { + printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n", + irq, i); + return i; + } + + set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0); + output_control(); + gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0); + return 0; +} + +static void hss_close(int port, void *pdev) +{ + free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) : + IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev); + set_carrier_cb_tab[!!port] = NULL; /* catch bugs */ + + set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1); + output_control(); + gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1); +} + + +/* Flash memory */ +static struct flash_platform_data flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device device_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { .platform_data = &flash_data }, + .num_resources = 1, + .resource = &flash_resource, +}; + + +/* I^2C interface */ +static struct i2c_gpio_platform_data i2c_data = { + .sda_pin = GPIO_SDA, + .scl_pin = GPIO_SCL, +}; + +static struct platform_device device_i2c = { + .name = "i2c-gpio", + .id = 0, + .dev = { .platform_data = &i2c_data }, +}; + + +/* IXP425 2 UART ports */ +static struct resource uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT + + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT + + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device device_uarts = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = uart_data, + .num_resources = 2, + .resource = uart_resources, +}; + + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info eth_plat[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 32, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 33, + } +}; + +static struct platform_device device_eth_tab[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = eth_plat, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = eth_plat + 1, + } +}; + + +/* IXP425 2 synchronous serial ports */ +static struct hss_plat_info hss_plat[] = { + { + .set_clock = hss_set_clock, + .open = hss_open, + .close = hss_close, + .txreadyq = 34, + }, { + .set_clock = hss_set_clock, + .open = hss_open, + .close = hss_close, + .txreadyq = 35, + } +}; + +static struct platform_device device_hss_tab[] = { + { + .name = "ixp4xx_hss", + .id = 0, + .dev.platform_data = hss_plat, + }, { + .name = "ixp4xx_hss", + .id = 1, + .dev.platform_data = hss_plat + 1, + } +}; + + +static struct platform_device *device_tab[7] __initdata = { + &device_flash, /* index 0 */ +}; + +static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr) +{ +#ifdef __ARMEB__ + return __raw_readb(flash + addr); +#else + return __raw_readb(flash + (addr ^ 3)); +#endif +} + +static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr) +{ +#ifdef __ARMEB__ + return __raw_readw(flash + addr); +#else + return __raw_readw(flash + (addr ^ 2)); +#endif +} + +static void __init gmlr_init(void) +{ + u8 __iomem *flash; + int i, devices = 1; /* flash */ + + ixp4xx_sys_init(); + + if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL) + printk(KERN_ERR "goramo-mlr: unable to access system" + " configuration data\n"); + else { + system_rev = __raw_readl(flash + CFG_REV); + hw_bits = __raw_readl(flash + CFG_HW_BITS); + + for (i = 0; i < ETH_ALEN; i++) { + eth_plat[0].hwaddr[i] = + flash_readb(flash, CFG_ETH0_ADDRESS + i); + eth_plat[1].hwaddr[i] = + flash_readb(flash, CFG_ETH1_ADDRESS + i); + } + + __raw_writew(FLASH_CMD_READ_ID, flash); + system_serial_high = flash_readw(flash, FLASH_SER_OFF); + system_serial_high <<= 16; + system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2); + system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4); + system_serial_low <<= 16; + system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6); + __raw_writew(FLASH_CMD_READ_ARRAY, flash); + + iounmap(flash); + } + + switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) { + case CFG_HW_HAS_UART0: + memset(&uart_data[1], 0, sizeof(uart_data[1])); + device_uarts.num_resources = 1; + break; + + case CFG_HW_HAS_UART1: + device_uarts.dev.platform_data = &uart_data[1]; + device_uarts.resource = &uart_resources[1]; + device_uarts.num_resources = 1; + break; + } + if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) + device_tab[devices++] = &device_uarts; /* max index 1 */ + + if (hw_bits & CFG_HW_HAS_ETH0) + device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */ + if (hw_bits & CFG_HW_HAS_ETH1) + device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */ + + if (hw_bits & CFG_HW_HAS_HSS0) + device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */ + if (hw_bits & CFG_HW_HAS_HSS1) + device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */ + + if (hw_bits & CFG_HW_HAS_EEPROM) + device_tab[devices++] = &device_i2c; /* max index 6 */ + + gpio_request(GPIO_SCL, "SCL/clock"); + gpio_request(GPIO_SDA, "SDA/data"); + gpio_request(GPIO_STR, "strobe"); + gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS"); + gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS"); + gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD"); + gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD"); + + gpio_direction_output(GPIO_SCL, 1); + gpio_direction_output(GPIO_SDA, 1); + gpio_direction_output(GPIO_STR, 0); + gpio_direction_output(GPIO_HSS0_RTS_N, 1); + gpio_direction_output(GPIO_HSS1_RTS_N, 1); + gpio_direction_input(GPIO_HSS0_DCD_N); + gpio_direction_input(GPIO_HSS1_DCD_N); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); + + set_control(CONTROL_HSS0_DTR_N, 1); + set_control(CONTROL_HSS1_DTR_N, 1); + set_control(CONTROL_EEPROM_WC_N, 1); + set_control(CONTROL_PCI_RESET_N, 1); + output_control(); + + msleep(1); /* Wait for PCI devices to initialize */ + + flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + platform_add_devices(device_tab, devices); +} + + +#ifdef CONFIG_PCI +static void __init gmlr_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static void __init gmlr_pci_postinit(void) +{ + if ((hw_bits & CFG_HW_USB_PORTS) >= 2 && + (hw_bits & CFG_HW_USB_PORTS) < 5) { + /* need to adjust number of USB ports on NEC chip */ + u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0; + if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) { + value &= ~7; + value |= (hw_bits & CFG_HW_USB_PORTS); + ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value); + } + } +} + +static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + switch(slot) { + case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA); + case SLOT_ETHB: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB); + case SLOT_NEC: return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC); + default: return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI); + } +} + +static struct hw_pci gmlr_hw_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = gmlr_pci_preinit, + .postinit = gmlr_pci_postinit, + .setup = ixp4xx_setup, + .map_irq = gmlr_map_irq, +}; + +static int __init gmlr_pci_init(void) +{ + if (machine_is_goramo_mlr() && + (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT))) + pci_common_init(&gmlr_hw_pci); + return 0; +} + +subsys_initcall(gmlr_pci_init); +#endif /* CONFIG_PCI */ + + +MACHINE_START(GORAMO_MLR, "MultiLink") + /* Maintainer: Krzysztof Halasa */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = gmlr_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 20960704183..551d114c9e1 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -26,14 +26,16 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/irq.h> - #include <asm/mach-types.h> -#include <asm/hardware.h> -#include <asm/arch/gtwx5715.h> +#include <mach/hardware.h> #include <asm/mach/pci.h> +#define SLOT0_DEVID 0 +#define SLOT1_DEVID 1 +#define INTA 10 /* slot 1 has INTA and INTB crossed */ +#define INTB 11 + /* - * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h * Slot 0 isn't actually populated with a card connector but * we initialize it anyway in case a future version has the * slot populated or someone with good soldering skills has @@ -41,49 +43,40 @@ */ void __init gtwx5715_pci_preinit(void) { - set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW); - + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init gtwx5715_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - int rc; - static int gtwx5715_irqmap - [GTWX5715_PCI_SLOT_COUNT] - [GTWX5715_PCI_INT_PIN_COUNT] = { - {GTWX5715_PCI_SLOT0_INTA_IRQ, GTWX5715_PCI_SLOT0_INTB_IRQ}, - {GTWX5715_PCI_SLOT1_INTA_IRQ, GTWX5715_PCI_SLOT1_INTB_IRQ}, -}; + int rc = -1; - if (slot >= GTWX5715_PCI_SLOT_COUNT || - pin >= GTWX5715_PCI_INT_PIN_COUNT) rc = -1; - else - rc = gtwx5715_irqmap[slot][pin-1]; + if ((slot == SLOT0_DEVID && pin == 1) || + (slot == SLOT1_DEVID && pin == 2)) + rc = IXP4XX_GPIO_IRQ(INTA); + else if ((slot == SLOT0_DEVID && pin == 2) || + (slot == SLOT1_DEVID && pin == 1)) + rc = IXP4XX_GPIO_IRQ(INTB); - printk("%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, rc); - return(rc); + printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", + __func__, slot, pin, rc); + return rc; } struct hw_pci gtwx5715_pci __initdata = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = gtwx5715_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = gtwx5715_map_irq, }; int __init gtwx5715_pci_init(void) { if (machine_is_gtwx5715()) - { pci_common_init(>wx5715_pci); - } return 0; } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index dc6725bda3c..16a12994fb5 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -27,17 +27,42 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> - #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/arch/gtwx5715.h> + +/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch + and operate as an SPI type interface. The details of the interface + are available on Kendin/Micrel's web site. */ + +#define GTWX5715_KSSPI_SELECT 5 +#define GTWX5715_KSSPI_TXD 6 +#define GTWX5715_KSSPI_CLOCK 7 +#define GTWX5715_KSSPI_RXD 12 + +/* The "reset" button is wired to GPIO 3. + The GPIO is brought "low" when the button is pushed. */ + +#define GTWX5715_BUTTON_GPIO 3 + +/* Board Label Front Label + LED1 Power + LED2 Wireless-G + LED3 not populated but could be + LED4 Internet + LED5 - LED8 Controlled by KS8995M Switch + LED9 DMZ */ + +#define GTWX5715_LED1_GPIO 2 +#define GTWX5715_LED2_GPIO 9 +#define GTWX5715_LED3_GPIO 8 +#define GTWX5715_LED4_GPIO 1 +#define GTWX5715_LED9_GPIO 4 /* * Xscale UART registers are 32 bits wide with only the least @@ -139,13 +164,16 @@ static void __init gtwx5715_init(void) MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") /* Maintainer: George Joseph */ - .phys_io = IXP4XX_UART2_BASE_PHYS, - .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = gtwx5715_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h new file mode 100644 index 00000000000..ebc0ba31ce8 --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h @@ -0,0 +1,58 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/cpu.h + * + * IXP4XX cpu type detection + * + * Copyright (C) 2007 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ASM_ARCH_CPU_H__ +#define __ASM_ARCH_CPU_H__ + +#include <linux/io.h> +#include <asm/cputype.h> + +/* Processor id value in CP15 Register 0 */ +#define IXP42X_PROCESSOR_ID_VALUE 0x690541c0 /* including unused 0x690541Ex */ +#define IXP42X_PROCESSOR_ID_MASK 0xffffffc0 + +#define IXP43X_PROCESSOR_ID_VALUE 0x69054040 +#define IXP43X_PROCESSOR_ID_MASK 0xfffffff0 + +#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */ +#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0 + +#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \ + IXP42X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \ + IXP42X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \ + IXP43X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \ + IXP46X_PROCESSOR_ID_VALUE) + +static inline u32 ixp4xx_read_feature_bits(void) +{ + u32 val = ~__raw_readl(IXP4XX_EXP_CFG2); + + if (cpu_is_ixp42x_rev_a0()) + return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP | + IXP4XX_FEATURE_AES); + if (cpu_is_ixp42x()) + return val & IXP42X_FEATURE_MASK; + if (cpu_is_ixp43x()) + return val & IXP43X_FEATURE_MASK; + return val & IXP46X_FEATURE_MASK; +} + +static inline void ixp4xx_write_feature_bits(u32 value) +{ + __raw_writel(~value, IXP4XX_EXP_CFG2); +} + +#endif /* _ASM_ARCH_CPU_H */ diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S new file mode 100644 index 00000000000..79adf83e2c3 --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for IXP4xx-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <mach/hardware.h> + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET) + ldr \irqstat, [\irqstat] @ get interrupts + cmp \irqstat, #0 + beq 1001f @ upper IRQ? + clz \irqnr, \irqstat + mov \base, #31 + sub \irqnr, \base, \irqnr + b 1002f @ lower IRQ being + @ handled + +1001: + /* + * IXP465/IXP435 has an upper IRQ status register + */ +#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) + ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET) + ldr \irqstat, [\irqstat] @ get upper interrupts + mov \irqnr, #63 + clz \irqstat, \irqstat + cmp \irqstat, #32 + subne \irqnr, \irqnr, \irqstat +#endif +1002: + .endm + + diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h new file mode 100644 index 00000000000..034bb2a1b80 --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h @@ -0,0 +1,36 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/hardware.h + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* + * Hardware definitions for IXP4xx based systems + */ + +#ifndef __ASM_ARCH_HARDWARE_H__ +#define __ASM_ARCH_HARDWARE_H__ + +#ifdef CONFIG_IXP4XX_INDIRECT_PCI +#define PCIBIOS_MAX_MEM 0x4FFFFFFF +#else +#define PCIBIOS_MAX_MEM 0x4BFFFFFF +#endif + +/* Register locations and bits */ +#include "ixp4xx-regs.h" + +#ifndef __ASSEMBLER__ +#include <mach/cpu.h> +#endif + +/* Platform helper functions and definitions */ +#include "platform.h" + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h new file mode 100644 index 00000000000..559c69a4773 --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -0,0 +1,503 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/io.h + * + * Author: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002-2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#include <linux/bitops.h> + +#include <mach/hardware.h> + +extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); +extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); + + +/* + * IXP4xx provides two methods of accessing PCI memory space: + * + * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). + * To access PCI via this space, we simply ioremap() the BAR + * into the kernel and we can use the standard read[bwl]/write[bwl] + * macros. This is the preffered method due to speed but it + * limits the system to just 64MB of PCI memory. This can be + * problematic if using video cards and other memory-heavy targets. + * + * 2) If > 64MB of memory space is required, the IXP4xx can use indirect + * registers to access the whole 4 GB of PCI memory space (as we do below + * for I/O transactions). This allows currently for up to 1 GB (0x10000000 + * to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that + * every PCI access requires three local register accesses plus a spinlock, + * but in some cases the performance hit is acceptable. In addition, you + * cannot mmap() PCI devices in this case. + */ +#ifdef CONFIG_IXP4XX_INDIRECT_PCI + +/* + * In the case of using indirect PCI, we simply return the actual PCI + * address and our read/write implementation use that to drive the + * access registers. If something outside of PCI is ioremap'd, we + * fallback to the default. + */ + +extern unsigned long pcibios_min_mem; +static inline int is_pci_memory(u32 addr) +{ + return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF); +} + +#define writeb(v, p) __indirect_writeb(v, p) +#define writew(v, p) __indirect_writew(v, p) +#define writel(v, p) __indirect_writel(v, p) + +#define writesb(p, v, l) __indirect_writesb(p, v, l) +#define writesw(p, v, l) __indirect_writesw(p, v, l) +#define writesl(p, v, l) __indirect_writesl(p, v, l) + +#define readb(p) __indirect_readb(p) +#define readw(p) __indirect_readw(p) +#define readl(p) __indirect_readl(p) + +#define readsb(p, v, l) __indirect_readsb(p, v, l) +#define readsw(p, v, l) __indirect_readsw(p, v, l) +#define readsl(p, v, l) __indirect_readsl(p, v, l) + +static inline void __indirect_writeb(u8 value, volatile void __iomem *p) +{ + u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (!is_pci_memory(addr)) { + __raw_writeb(value, addr); + return; + } + + n = addr % 4; + byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; + data = value << (8*n); + ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); +} + +static inline void __indirect_writesb(volatile void __iomem *bus_addr, + const u8 *vaddr, int count) +{ + while (count--) + writeb(*vaddr++, bus_addr); +} + +static inline void __indirect_writew(u16 value, volatile void __iomem *p) +{ + u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (!is_pci_memory(addr)) { + __raw_writew(value, addr); + return; + } + + n = addr % 4; + byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; + data = value << (8*n); + ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); +} + +static inline void __indirect_writesw(volatile void __iomem *bus_addr, + const u16 *vaddr, int count) +{ + while (count--) + writew(*vaddr++, bus_addr); +} + +static inline void __indirect_writel(u32 value, volatile void __iomem *p) +{ + u32 addr = (__force u32)p; + + if (!is_pci_memory(addr)) { + __raw_writel(value, p); + return; + } + + ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value); +} + +static inline void __indirect_writesl(volatile void __iomem *bus_addr, + const u32 *vaddr, int count) +{ + while (count--) + writel(*vaddr++, bus_addr); +} + +static inline unsigned char __indirect_readb(const volatile void __iomem *p) +{ + u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (!is_pci_memory(addr)) + return __raw_readb(addr); + + n = addr % 4; + byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; + if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data)) + return 0xff; + + return data >> (8*n); +} + +static inline void __indirect_readsb(const volatile void __iomem *bus_addr, + u8 *vaddr, u32 count) +{ + while (count--) + *vaddr++ = readb(bus_addr); +} + +static inline unsigned short __indirect_readw(const volatile void __iomem *p) +{ + u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (!is_pci_memory(addr)) + return __raw_readw(addr); + + n = addr % 4; + byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; + if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data)) + return 0xffff; + + return data>>(8*n); +} + +static inline void __indirect_readsw(const volatile void __iomem *bus_addr, + u16 *vaddr, u32 count) +{ + while (count--) + *vaddr++ = readw(bus_addr); +} + +static inline unsigned long __indirect_readl(const volatile void __iomem *p) +{ + u32 addr = (__force u32)p; + u32 data; + + if (!is_pci_memory(addr)) + return __raw_readl(p); + + if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data)) + return 0xffffffff; + + return data; +} + +static inline void __indirect_readsl(const volatile void __iomem *bus_addr, + u32 *vaddr, u32 count) +{ + while (count--) + *vaddr++ = readl(bus_addr); +} + + +/* + * We can use the built-in functions b/c they end up calling writeb/readb + */ +#define memset_io(c,v,l) _memset_io((c),(v),(l)) +#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l)) +#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l)) + +#endif /* CONFIG_IXP4XX_INDIRECT_PCI */ + +#ifndef CONFIG_PCI + +#define __io(v) __typesafe_io(v) + +#else + +/* + * IXP4xx does not have a transparent cpu -> PCI I/O translation + * window. Instead, it has a set of registers that must be tweaked + * with the proper byte lanes, command types, and address for the + * transaction. This means that we need to override the default + * I/O functions. + */ + +static inline void outb(u8 value, u32 addr) +{ + u32 n, byte_enables, data; + n = addr % 4; + byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; + data = value << (8*n); + ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); +} + +static inline void outsb(u32 io_addr, const u8 *vaddr, u32 count) +{ + while (count--) + outb(*vaddr++, io_addr); +} + +static inline void outw(u16 value, u32 addr) +{ + u32 n, byte_enables, data; + n = addr % 4; + byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; + data = value << (8*n); + ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); +} + +static inline void outsw(u32 io_addr, const u16 *vaddr, u32 count) +{ + while (count--) + outw(cpu_to_le16(*vaddr++), io_addr); +} + +static inline void outl(u32 value, u32 addr) +{ + ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value); +} + +static inline void outsl(u32 io_addr, const u32 *vaddr, u32 count) +{ + while (count--) + outl(cpu_to_le32(*vaddr++), io_addr); +} + +static inline u8 inb(u32 addr) +{ + u32 n, byte_enables, data; + n = addr % 4; + byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; + if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data)) + return 0xff; + + return data >> (8*n); +} + +static inline void insb(u32 io_addr, u8 *vaddr, u32 count) +{ + while (count--) + *vaddr++ = inb(io_addr); +} + +static inline u16 inw(u32 addr) +{ + u32 n, byte_enables, data; + n = addr % 4; + byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; + if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data)) + return 0xffff; + + return data>>(8*n); +} + +static inline void insw(u32 io_addr, u16 *vaddr, u32 count) +{ + while (count--) + *vaddr++ = le16_to_cpu(inw(io_addr)); +} + +static inline u32 inl(u32 addr) +{ + u32 data; + if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data)) + return 0xffffffff; + + return data; +} + +static inline void insl(u32 io_addr, u32 *vaddr, u32 count) +{ + while (count--) + *vaddr++ = le32_to_cpu(inl(io_addr)); +} + +#define PIO_OFFSET 0x10000UL +#define PIO_MASK 0x0ffffUL + +#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \ + ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) + +#define ioread8(p) ioread8(p) +static inline unsigned int ioread8(const void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + return (unsigned int)inb(port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + return (unsigned int)__raw_readb(addr); +#else + return (unsigned int)__indirect_readb(addr); +#endif +} + +#define ioread8_rep(p, v, c) ioread8_rep(p, v, c) +static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + insb(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsb(addr, vaddr, count); +#else + __indirect_readsb(addr, vaddr, count); +#endif +} + +#define ioread16(p) ioread16(p) +static inline unsigned int ioread16(const void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + return (unsigned int)inw(port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + return le16_to_cpu((__force __le16)__raw_readw(addr)); +#else + return (unsigned int)__indirect_readw(addr); +#endif +} + +#define ioread16_rep(p, v, c) ioread16_rep(p, v, c) +static inline void ioread16_rep(const void __iomem *addr, void *vaddr, + u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + insw(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsw(addr, vaddr, count); +#else + __indirect_readsw(addr, vaddr, count); +#endif +} + +#define ioread32(p) ioread32(p) +static inline unsigned int ioread32(const void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + return (unsigned int)inl(port & PIO_MASK); + else { +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + return le32_to_cpu((__force __le32)__raw_readl(addr)); +#else + return (unsigned int)__indirect_readl(addr); +#endif + } +} + +#define ioread32_rep(p, v, c) ioread32_rep(p, v, c) +static inline void ioread32_rep(const void __iomem *addr, void *vaddr, + u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + insl(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsl(addr, vaddr, count); +#else + __indirect_readsl(addr, vaddr, count); +#endif +} + +#define iowrite8(v, p) iowrite8(v, p) +static inline void iowrite8(u8 value, void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outb(value, port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writeb(value, addr); +#else + __indirect_writeb(value, addr); +#endif +} + +#define iowrite8_rep(p, v, c) iowrite8_rep(p, v, c) +static inline void iowrite8_rep(void __iomem *addr, const void *vaddr, + u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outsb(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesb(addr, vaddr, count); +#else + __indirect_writesb(addr, vaddr, count); +#endif +} + +#define iowrite16(v, p) iowrite16(v, p) +static inline void iowrite16(u16 value, void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outw(value, port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writew(cpu_to_le16(value), addr); +#else + __indirect_writew(value, addr); +#endif +} + +#define iowrite16_rep(p, v, c) iowrite16_rep(p, v, c) +static inline void iowrite16_rep(void __iomem *addr, const void *vaddr, + u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outsw(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesw(addr, vaddr, count); +#else + __indirect_writesw(addr, vaddr, count); +#endif +} + +#define iowrite32(v, p) iowrite32(v, p) +static inline void iowrite32(u32 value, void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outl(value, port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writel((u32 __force)cpu_to_le32(value), addr); +#else + __indirect_writel(value, addr); +#endif +} + +#define iowrite32_rep(p, v, c) iowrite32_rep(p, v, c) +static inline void iowrite32_rep(void __iomem *addr, const void *vaddr, + u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + outsl(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesl(addr, vaddr, count); +#else + __indirect_writesl(addr, vaddr, count); +#endif +} + +#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET)) +#define ioport_unmap(addr) +#endif /* CONFIG_PCI */ + +#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h new file mode 100644 index 00000000000..7e6d4cce7c2 --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/irqs.h @@ -0,0 +1,75 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/irqs.h + * + * IRQ definitions for IXP4XX based systems + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _ARCH_IXP4XX_IRQS_H_ +#define _ARCH_IXP4XX_IRQS_H_ + +#define IRQ_IXP4XX_NPEA 0 +#define IRQ_IXP4XX_NPEB 1 +#define IRQ_IXP4XX_NPEC 2 +#define IRQ_IXP4XX_QM1 3 +#define IRQ_IXP4XX_QM2 4 +#define IRQ_IXP4XX_TIMER1 5 +#define IRQ_IXP4XX_GPIO0 6 +#define IRQ_IXP4XX_GPIO1 7 +#define IRQ_IXP4XX_PCI_INT 8 +#define IRQ_IXP4XX_PCI_DMA1 9 +#define IRQ_IXP4XX_PCI_DMA2 10 +#define IRQ_IXP4XX_TIMER2 11 +#define IRQ_IXP4XX_USB 12 +#define IRQ_IXP4XX_UART2 13 +#define IRQ_IXP4XX_TIMESTAMP 14 +#define IRQ_IXP4XX_UART1 15 +#define IRQ_IXP4XX_WDOG 16 +#define IRQ_IXP4XX_AHB_PMU 17 +#define IRQ_IXP4XX_XSCALE_PMU 18 +#define IRQ_IXP4XX_GPIO2 19 +#define IRQ_IXP4XX_GPIO3 20 +#define IRQ_IXP4XX_GPIO4 21 +#define IRQ_IXP4XX_GPIO5 22 +#define IRQ_IXP4XX_GPIO6 23 +#define IRQ_IXP4XX_GPIO7 24 +#define IRQ_IXP4XX_GPIO8 25 +#define IRQ_IXP4XX_GPIO9 26 +#define IRQ_IXP4XX_GPIO10 27 +#define IRQ_IXP4XX_GPIO11 28 +#define IRQ_IXP4XX_GPIO12 29 +#define IRQ_IXP4XX_SW_INT1 30 +#define IRQ_IXP4XX_SW_INT2 31 +#define IRQ_IXP4XX_USB_HOST 32 +#define IRQ_IXP4XX_I2C 33 +#define IRQ_IXP4XX_SSP 34 +#define IRQ_IXP4XX_TSYNC 35 +#define IRQ_IXP4XX_EAU_DONE 36 +#define IRQ_IXP4XX_SHA_DONE 37 +#define IRQ_IXP4XX_SWCP_PE 58 +#define IRQ_IXP4XX_QM_PE 60 +#define IRQ_IXP4XX_MCU_ECC 61 +#define IRQ_IXP4XX_EXP_PE 62 + +#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n) +#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n) + +/* + * Only first 32 sources are valid if running on IXP42x systems + */ +#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) +#define NR_IRQS 64 +#else +#define NR_IRQS 32 +#endif + +#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) + +#endif diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h b/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h new file mode 100644 index 00000000000..cf03614d250 --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h @@ -0,0 +1,81 @@ +/* + * PTP 1588 clock using the IXP46X + * + * Copyright (C) 2010 OMICRON electronics GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _IXP46X_TS_H_ +#define _IXP46X_TS_H_ + +#define DEFAULT_ADDEND 0xF0000029 +#define TICKS_NS_SHIFT 4 + +struct ixp46x_channel_ctl { + u32 ch_control; /* 0x40 Time Synchronization Channel Control */ + u32 ch_event; /* 0x44 Time Synchronization Channel Event */ + u32 tx_snap_lo; /* 0x48 Transmit Snapshot Low Register */ + u32 tx_snap_hi; /* 0x4C Transmit Snapshot High Register */ + u32 rx_snap_lo; /* 0x50 Receive Snapshot Low Register */ + u32 rx_snap_hi; /* 0x54 Receive Snapshot High Register */ + u32 src_uuid_lo; /* 0x58 Source UUID0 Low Register */ + u32 src_uuid_hi; /* 0x5C Sequence Identifier/Source UUID0 High */ +}; + +struct ixp46x_ts_regs { + u32 control; /* 0x00 Time Sync Control Register */ + u32 event; /* 0x04 Time Sync Event Register */ + u32 addend; /* 0x08 Time Sync Addend Register */ + u32 accum; /* 0x0C Time Sync Accumulator Register */ + u32 test; /* 0x10 Time Sync Test Register */ + u32 unused; /* 0x14 */ + u32 rsystime_lo; /* 0x18 RawSystemTime_Low Register */ + u32 rsystime_hi; /* 0x1C RawSystemTime_High Register */ + u32 systime_lo; /* 0x20 SystemTime_Low Register */ + u32 systime_hi; /* 0x24 SystemTime_High Register */ + u32 trgt_lo; /* 0x28 TargetTime_Low Register */ + u32 trgt_hi; /* 0x2C TargetTime_High Register */ + u32 asms_lo; /* 0x30 Auxiliary Slave Mode Snapshot Low */ + u32 asms_hi; /* 0x34 Auxiliary Slave Mode Snapshot High */ + u32 amms_lo; /* 0x38 Auxiliary Master Mode Snapshot Low */ + u32 amms_hi; /* 0x3C Auxiliary Master Mode Snapshot High */ + + struct ixp46x_channel_ctl channel[3]; +}; + +/* 0x00 Time Sync Control Register Bits */ +#define TSCR_AMM (1<<3) +#define TSCR_ASM (1<<2) +#define TSCR_TTM (1<<1) +#define TSCR_RST (1<<0) + +/* 0x04 Time Sync Event Register Bits */ +#define TSER_SNM (1<<3) +#define TSER_SNS (1<<2) +#define TTIPEND (1<<1) + +/* 0x40 Time Synchronization Channel Control Register Bits */ +#define MASTER_MODE (1<<0) +#define TIMESTAMP_ALL (1<<1) + +/* 0x44 Time Synchronization Channel Event Register Bits */ +#define TX_SNAPSHOT_LOCKED (1<<0) +#define RX_SNAPSHOT_LOCKED (1<<1) + +/* The ptp_ixp46x module will set this variable */ +extern int ixp46x_phc_index; + +#endif diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h new file mode 100644 index 00000000000..c5bae9c035d --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -0,0 +1,652 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h + * + * Register definitions for IXP4xx chipset. This file contains + * register location and bit definitions only. Platform specific + * definitions and helper function declarations are in platform.h + * and machine-name.h. + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _ASM_ARM_IXP4XX_H_ +#define _ASM_ARM_IXP4XX_H_ + +/* + * IXP4xx Linux Memory Map: + * + * Phy Size Virt Description + * ========================================================================= + * + * 0x00000000 0x10000000(max) PAGE_OFFSET System RAM + * + * 0x48000000 0x04000000 ioremap'd PCI Memory Space + * + * 0x50000000 0x10000000 ioremap'd EXP BUS + * + * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals + * + * 0xC0000000 0x00001000 0xFEF13000 PCI CFG + * + * 0xC4000000 0x00001000 0xFEF14000 EXP CFG + * + * 0x60000000 0x00004000 0xFEF15000 QMgr + */ + +/* + * Queue Manager + */ +#define IXP4XX_QMGR_BASE_PHYS 0x60000000 +#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000) +#define IXP4XX_QMGR_REGION_SIZE 0x00004000 + +/* + * Peripheral space, including debug UART. Must be section-aligned so that + * it can be used with the low-level debug code. + */ +#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000 +#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000) +#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000 + +/* + * PCI Config registers + */ +#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000 +#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000) +#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000 + +/* + * Expansion BUS Configuration registers + */ +#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000 +#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000 +#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000 + +#define IXP4XX_EXP_CS0_OFFSET 0x00 +#define IXP4XX_EXP_CS1_OFFSET 0x04 +#define IXP4XX_EXP_CS2_OFFSET 0x08 +#define IXP4XX_EXP_CS3_OFFSET 0x0C +#define IXP4XX_EXP_CS4_OFFSET 0x10 +#define IXP4XX_EXP_CS5_OFFSET 0x14 +#define IXP4XX_EXP_CS6_OFFSET 0x18 +#define IXP4XX_EXP_CS7_OFFSET 0x1C +#define IXP4XX_EXP_CFG0_OFFSET 0x20 +#define IXP4XX_EXP_CFG1_OFFSET 0x24 +#define IXP4XX_EXP_CFG2_OFFSET 0x28 +#define IXP4XX_EXP_CFG3_OFFSET 0x2C + +/* + * Expansion Bus Controller registers. + */ +#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x))) + +#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET) +#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET) +#define IXP4XX_EXP_CS2 IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) +#define IXP4XX_EXP_CS3 IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET) +#define IXP4XX_EXP_CS4 IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET) +#define IXP4XX_EXP_CS5 IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET) +#define IXP4XX_EXP_CS6 IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET) +#define IXP4XX_EXP_CS7 IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET) + +#define IXP4XX_EXP_CFG0 IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) +#define IXP4XX_EXP_CFG1 IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) +#define IXP4XX_EXP_CFG2 IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) +#define IXP4XX_EXP_CFG3 IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET) + + +/* + * Peripheral Space Register Region Base Addresses + */ +#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000) +#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000) +#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000) +#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000) +#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000) +#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000) +#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000) +#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000) +#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000) +#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000) +#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000) +#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000) +/* ixp46X only */ +#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000) +#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000) +#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000) +#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000) +#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000) +#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000) +#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000) + + +#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000) +#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000) +#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000) +#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000) +#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000) +#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000) +#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000) +#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000) +#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000) +#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000) +#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000) +#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000) +/* ixp46X only */ +#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000) +#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000) +#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000) +#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000) +#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000) +#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000) +#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000) + +/* + * Constants to make it easy to access Interrupt Controller registers + */ +#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */ +#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */ +#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */ +#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */ +#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */ +#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */ +#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */ +#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */ + +/* + * IXP465-only + */ +#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */ +#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */ +#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */ +#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */ +#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */ +#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */ + + +/* + * Interrupt Controller Register Definitions. + */ + +#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x))) + +#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET) +#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET) +#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET) +#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET) +#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET) +#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET) +#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) +#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET) +#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET) +#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET) +#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET) +#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET) +#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET) +#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET) + +/* + * Constants to make it easy to access GPIO registers + */ +#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00 +#define IXP4XX_GPIO_GPOER_OFFSET 0x04 +#define IXP4XX_GPIO_GPINR_OFFSET 0x08 +#define IXP4XX_GPIO_GPISR_OFFSET 0x0C +#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10 +#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14 +#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18 +#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C + +/* + * GPIO Register Definitions. + * [Only perform 32bit reads/writes] + */ +#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x))) + +#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET) +#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET) +#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET) +#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET) +#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET) +#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET) +#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET) +#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET) + +/* + * GPIO register bit definitions + */ + +/* Interrupt styles + */ +#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0 +#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1 +#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2 +#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3 +#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4 + +/* + * Mask used to clear interrupt styles + */ +#define IXP4XX_GPIO_STYLE_CLEAR 0x7 +#define IXP4XX_GPIO_STYLE_SIZE 3 + +/* + * Constants to make it easy to access Timer Control/Status registers + */ +#define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */ +#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */ +#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */ +#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */ +#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */ +#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */ +#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */ +#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */ +#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */ + +/* + * Operating System Timer Register Definitions. + */ + +#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x))) + +#define IXP4XX_OSTS IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET) +#define IXP4XX_OST1 IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET) +#define IXP4XX_OSRT1 IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET) +#define IXP4XX_OST2 IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET) +#define IXP4XX_OSRT2 IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET) +#define IXP4XX_OSWT IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET) +#define IXP4XX_OSWE IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET) +#define IXP4XX_OSWK IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET) +#define IXP4XX_OSST IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET) + +/* + * Timer register values and bit definitions + */ +#define IXP4XX_OST_ENABLE 0x00000001 +#define IXP4XX_OST_ONE_SHOT 0x00000002 +/* Low order bits of reload value ignored */ +#define IXP4XX_OST_RELOAD_MASK 0x00000003 +#define IXP4XX_OST_DISABLED 0x00000000 +#define IXP4XX_OSST_TIMER_1_PEND 0x00000001 +#define IXP4XX_OSST_TIMER_2_PEND 0x00000002 +#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004 +#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008 +#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010 + +#define IXP4XX_WDT_KEY 0x0000482E + +#define IXP4XX_WDT_RESET_ENABLE 0x00000001 +#define IXP4XX_WDT_IRQ_ENABLE 0x00000002 +#define IXP4XX_WDT_COUNT_ENABLE 0x00000004 + + +/* + * Constants to make it easy to access PCI Control/Status registers + */ +#define PCI_NP_AD_OFFSET 0x00 +#define PCI_NP_CBE_OFFSET 0x04 +#define PCI_NP_WDATA_OFFSET 0x08 +#define PCI_NP_RDATA_OFFSET 0x0c +#define PCI_CRP_AD_CBE_OFFSET 0x10 +#define PCI_CRP_WDATA_OFFSET 0x14 +#define PCI_CRP_RDATA_OFFSET 0x18 +#define PCI_CSR_OFFSET 0x1c +#define PCI_ISR_OFFSET 0x20 +#define PCI_INTEN_OFFSET 0x24 +#define PCI_DMACTRL_OFFSET 0x28 +#define PCI_AHBMEMBASE_OFFSET 0x2c +#define PCI_AHBIOBASE_OFFSET 0x30 +#define PCI_PCIMEMBASE_OFFSET 0x34 +#define PCI_AHBDOORBELL_OFFSET 0x38 +#define PCI_PCIDOORBELL_OFFSET 0x3C +#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40 +#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44 +#define PCI_ATPDMA0_LENADDR_OFFSET 0x48 +#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C +#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50 +#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 + +/* + * PCI Control/Status Registers + */ +#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x))) + +#define PCI_NP_AD IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET) +#define PCI_NP_CBE IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET) +#define PCI_NP_WDATA IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET) +#define PCI_NP_RDATA IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET) +#define PCI_CRP_AD_CBE IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET) +#define PCI_CRP_WDATA IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET) +#define PCI_CRP_RDATA IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET) +#define PCI_CSR IXP4XX_PCI_CSR(PCI_CSR_OFFSET) +#define PCI_ISR IXP4XX_PCI_CSR(PCI_ISR_OFFSET) +#define PCI_INTEN IXP4XX_PCI_CSR(PCI_INTEN_OFFSET) +#define PCI_DMACTRL IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET) +#define PCI_AHBMEMBASE IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET) +#define PCI_AHBIOBASE IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET) +#define PCI_PCIMEMBASE IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET) +#define PCI_AHBDOORBELL IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET) +#define PCI_PCIDOORBELL IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET) +#define PCI_ATPDMA0_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET) +#define PCI_ATPDMA0_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET) +#define PCI_ATPDMA0_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET) +#define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET) +#define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET) +#define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET) + +/* + * PCI register values and bit definitions + */ + +/* CSR bit definitions */ +#define PCI_CSR_HOST 0x00000001 +#define PCI_CSR_ARBEN 0x00000002 +#define PCI_CSR_ADS 0x00000004 +#define PCI_CSR_PDS 0x00000008 +#define PCI_CSR_ABE 0x00000010 +#define PCI_CSR_DBT 0x00000020 +#define PCI_CSR_ASE 0x00000100 +#define PCI_CSR_IC 0x00008000 + +/* ISR (Interrupt status) Register bit definitions */ +#define PCI_ISR_PSE 0x00000001 +#define PCI_ISR_PFE 0x00000002 +#define PCI_ISR_PPE 0x00000004 +#define PCI_ISR_AHBE 0x00000008 +#define PCI_ISR_APDC 0x00000010 +#define PCI_ISR_PADC 0x00000020 +#define PCI_ISR_ADB 0x00000040 +#define PCI_ISR_PDB 0x00000080 + +/* INTEN (Interrupt Enable) Register bit definitions */ +#define PCI_INTEN_PSE 0x00000001 +#define PCI_INTEN_PFE 0x00000002 +#define PCI_INTEN_PPE 0x00000004 +#define PCI_INTEN_AHBE 0x00000008 +#define PCI_INTEN_APDC 0x00000010 +#define PCI_INTEN_PADC 0x00000020 +#define PCI_INTEN_ADB 0x00000040 +#define PCI_INTEN_PDB 0x00000080 + +/* + * Shift value for byte enable on NP cmd/byte enable register + */ +#define IXP4XX_PCI_NP_CBE_BESL 4 + +/* + * PCI commands supported by NP access unit + */ +#define NP_CMD_IOREAD 0x2 +#define NP_CMD_IOWRITE 0x3 +#define NP_CMD_CONFIGREAD 0xa +#define NP_CMD_CONFIGWRITE 0xb +#define NP_CMD_MEMREAD 0x6 +#define NP_CMD_MEMWRITE 0x7 + +/* + * Constants for CRP access into local config space + */ +#define CRP_AD_CBE_BESL 20 +#define CRP_AD_CBE_WRITE 0x00010000 + + +/* + * USB Device Controller + * + * These are used by the USB gadget driver, so they don't follow the + * IXP4XX_ naming convetions. + * + */ +# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x))) + +/* UDC Undocumented - Reserved1 */ +#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004) +/* UDC Undocumented - Reserved2 */ +#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008) +/* UDC Undocumented - Reserved3 */ +#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C) +/* UDC Control Register */ +#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000) +/* UDC Endpoint 0 Control/Status Register */ +#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010) +/* UDC Endpoint 1 (IN) Control/Status Register */ +#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014) +/* UDC Endpoint 2 (OUT) Control/Status Register */ +#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018) +/* UDC Endpoint 3 (IN) Control/Status Register */ +#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C) +/* UDC Endpoint 4 (OUT) Control/Status Register */ +#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020) +/* UDC Endpoint 5 (Interrupt) Control/Status Register */ +#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024) +/* UDC Endpoint 6 (IN) Control/Status Register */ +#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028) +/* UDC Endpoint 7 (OUT) Control/Status Register */ +#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C) +/* UDC Endpoint 8 (IN) Control/Status Register */ +#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030) +/* UDC Endpoint 9 (OUT) Control/Status Register */ +#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034) +/* UDC Endpoint 10 (Interrupt) Control/Status Register */ +#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038) +/* UDC Endpoint 11 (IN) Control/Status Register */ +#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C) +/* UDC Endpoint 12 (OUT) Control/Status Register */ +#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040) +/* UDC Endpoint 13 (IN) Control/Status Register */ +#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044) +/* UDC Endpoint 14 (OUT) Control/Status Register */ +#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048) +/* UDC Endpoint 15 (Interrupt) Control/Status Register */ +#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C) +/* UDC Frame Number Register High */ +#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060) +/* UDC Frame Number Register Low */ +#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064) +/* UDC Byte Count Reg 2 */ +#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068) +/* UDC Byte Count Reg 4 */ +#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c) +/* UDC Byte Count Reg 7 */ +#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070) +/* UDC Byte Count Reg 9 */ +#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074) +/* UDC Byte Count Reg 12 */ +#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078) +/* UDC Byte Count Reg 14 */ +#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c) +/* UDC Endpoint 0 Data Register */ +#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080) +/* UDC Endpoint 1 Data Register */ +#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100) +/* UDC Endpoint 2 Data Register */ +#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180) +/* UDC Endpoint 3 Data Register */ +#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200) +/* UDC Endpoint 4 Data Register */ +#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400) +/* UDC Endpoint 5 Data Register */ +#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0) +/* UDC Endpoint 6 Data Register */ +#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600) +/* UDC Endpoint 7 Data Register */ +#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680) +/* UDC Endpoint 8 Data Register */ +#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700) +/* UDC Endpoint 9 Data Register */ +#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900) +/* UDC Endpoint 10 Data Register */ +#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0) +/* UDC Endpoint 11 Data Register */ +#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00) +/* UDC Endpoint 12 Data Register */ +#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80) +/* UDC Endpoint 13 Data Register */ +#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00) +/* UDC Endpoint 14 Data Register */ +#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00) +/* UDC Endpoint 15 Data Register */ +#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0) +/* UDC Interrupt Control Register 0 */ +#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050) +/* UDC Interrupt Control Register 1 */ +#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054) +/* UDC Status Interrupt Register 0 */ +#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058) +/* UDC Status Interrupt Register 1 */ +#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C) + +#define UDCCR_UDE (1 << 0) /* UDC enable */ +#define UDCCR_UDA (1 << 1) /* UDC active */ +#define UDCCR_RSM (1 << 2) /* Device resume */ +#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ +#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ +#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ +#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ +#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ + +#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ +#define UDCCS0_IPR (1 << 1) /* IN packet ready */ +#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ +#define UDCCS0_SST (1 << 4) /* Sent stall */ +#define UDCCS0_FST (1 << 5) /* Force stall */ +#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ +#define UDCCS0_SA (1 << 7) /* Setup active */ + +#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_BI_SST (1 << 4) /* Sent stall */ +#define UDCCS_BI_FST (1 << 5) /* Force stall */ +#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ + +#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_BO_DME (1 << 3) /* DMA enable */ +#define UDCCS_BO_SST (1 << 4) /* Sent stall */ +#define UDCCS_BO_FST (1 << 5) /* Force stall */ +#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ + +#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ + +#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ +#define UDCCS_IO_DME (1 << 3) /* DMA enable */ +#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ + +#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_INT_SST (1 << 4) /* Sent stall */ +#define UDCCS_INT_FST (1 << 5) /* Force stall */ +#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ + +#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ +#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ +#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ +#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ +#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ +#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ +#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ +#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ + +#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ +#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ +#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ +#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ +#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ +#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ +#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ +#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ + +#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ +#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ +#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ +#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ +#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ +#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ +#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ +#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ + +#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ +#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ +#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ +#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ +#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ +#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ +#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ +#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ + +#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + +/* "fuse" bits of IXP_EXP_CFG2 */ +/* All IXP4xx CPUs */ +#define IXP4XX_FEATURE_RCOMP (1 << 0) +#define IXP4XX_FEATURE_USB_DEVICE (1 << 1) +#define IXP4XX_FEATURE_HASH (1 << 2) +#define IXP4XX_FEATURE_AES (1 << 3) +#define IXP4XX_FEATURE_DES (1 << 4) +#define IXP4XX_FEATURE_HDLC (1 << 5) +#define IXP4XX_FEATURE_AAL (1 << 6) +#define IXP4XX_FEATURE_HSS (1 << 7) +#define IXP4XX_FEATURE_UTOPIA (1 << 8) +#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9) +#define IXP4XX_FEATURE_NPEC_ETH (1 << 10) +#define IXP4XX_FEATURE_RESET_NPEA (1 << 11) +#define IXP4XX_FEATURE_RESET_NPEB (1 << 12) +#define IXP4XX_FEATURE_RESET_NPEC (1 << 13) +#define IXP4XX_FEATURE_PCI (1 << 14) +#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16) +#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22) +#define IXP42X_FEATURE_MASK (IXP4XX_FEATURE_RCOMP | \ + IXP4XX_FEATURE_USB_DEVICE | \ + IXP4XX_FEATURE_HASH | \ + IXP4XX_FEATURE_AES | \ + IXP4XX_FEATURE_DES | \ + IXP4XX_FEATURE_HDLC | \ + IXP4XX_FEATURE_AAL | \ + IXP4XX_FEATURE_HSS | \ + IXP4XX_FEATURE_UTOPIA | \ + IXP4XX_FEATURE_NPEB_ETH0 | \ + IXP4XX_FEATURE_NPEC_ETH | \ + IXP4XX_FEATURE_RESET_NPEA | \ + IXP4XX_FEATURE_RESET_NPEB | \ + IXP4XX_FEATURE_RESET_NPEC | \ + IXP4XX_FEATURE_PCI | \ + IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \ + IXP4XX_FEATURE_XSCALE_MAX_FREQ) + + +/* IXP43x/46x CPUs */ +#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15) +#define IXP4XX_FEATURE_USB_HOST (1 << 18) +#define IXP4XX_FEATURE_NPEA_ETH (1 << 19) +#define IXP43X_FEATURE_MASK (IXP42X_FEATURE_MASK | \ + IXP4XX_FEATURE_ECC_TIMESYNC | \ + IXP4XX_FEATURE_USB_HOST | \ + IXP4XX_FEATURE_NPEA_ETH) + +/* IXP46x CPU (including IXP455) only */ +#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20) +#define IXP4XX_FEATURE_RSA (1 << 21) +#define IXP46X_FEATURE_MASK (IXP43X_FEATURE_MASK | \ + IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \ + IXP4XX_FEATURE_RSA) + +#endif diff --git a/arch/arm/mach-ixp4xx/include/mach/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h new file mode 100644 index 00000000000..e320db2457a --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/npe.h @@ -0,0 +1,39 @@ +#ifndef __IXP4XX_NPE_H +#define __IXP4XX_NPE_H + +#include <linux/kernel.h> + +extern const char *npe_names[]; + +struct npe_regs { + u32 exec_addr, exec_data, exec_status_cmd, exec_count; + u32 action_points[4]; + u32 watchpoint_fifo, watch_count; + u32 profile_count; + u32 messaging_status, messaging_control; + u32 mailbox_status, /*messaging_*/ in_out_fifo; +}; + +struct npe { + struct resource *mem_res; + struct npe_regs __iomem *regs; + u32 regs_phys; + int id; + int valid; +}; + + +static inline const char *npe_name(struct npe *npe) +{ + return npe_names[npe->id]; +} + +int npe_running(struct npe *npe); +int npe_send_message(struct npe *npe, const void *msg, const char *what); +int npe_recv_message(struct npe *npe, void *msg, const char *what); +int npe_send_recv_message(struct npe *npe, void *msg, const char *what); +int npe_load_firmware(struct npe *npe, const char *name, struct device *dev); +struct npe *npe_request(unsigned id); +void npe_release(struct npe *npe); + +#endif /* __IXP4XX_NPE_H */ diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h new file mode 100644 index 00000000000..75c4c6572ad --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/platform.h @@ -0,0 +1,135 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/platform.h + * + * Constants and functions that are useful to IXP4xx platform-specific code + * and device drivers. + * + * Copyright (C) 2004 MontaVista Software, Inc. + */ + +#ifndef __ASM_ARCH_HARDWARE_H__ +#error "Do not include this directly, instead #include <mach/hardware.h>" +#endif + +#ifndef __ASSEMBLY__ + +#include <linux/reboot.h> + +#include <asm/types.h> + +#ifndef __ARMEB__ +#define REG_OFFSET 0 +#else +#define REG_OFFSET 3 +#endif + +/* + * Expansion bus memory regions + */ +#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000) + +/* + * The expansion bus on the IXP4xx can be configured for either 16 or + * 32MB windows and the CS offset for each region changes based on the + * current configuration. This means that we cannot simply hardcode + * each offset. ixp4xx_sys_init() looks at the expansion bus configuration + * as setup by the bootloader to determine our window size. + */ +extern unsigned long ixp4xx_exp_bus_size; + +#define IXP4XX_EXP_BUS_BASE(region)\ + (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size)) + +#define IXP4XX_EXP_BUS_END(region)\ + (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1) + +/* Those macros can be used to adjust timing and configure + * other features for each region. + */ + +#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16) +#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20) +#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22) +#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26) +#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28) +#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10) +#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14) + +#define IXP4XX_EXP_BUS_CS_EN (1L << 31) +#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6) +#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5) +#define IXP4XX_EXP_BUS_MUX_EN (1L << 4) +#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3) +#define IXP4XX_EXP_BUS_WR_EN (1L << 1) +#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0) + +#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00 +#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01 +#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02 + +#define IXP4XX_FLASH_WRITABLE (0x2) +#define IXP4XX_FLASH_DEFAULT (0xbcd23c40) +#define IXP4XX_FLASH_WRITE (0xbcd23c42) + +/* + * Clock Speed Definitions. + */ +#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */ +#define IXP4XX_UART_XTAL 14745600 + +/* + * This structure provide a means for the board setup code + * to give information to th pata_ixp4xx driver. It is + * passed as platform_data. + */ +struct ixp4xx_pata_data { + volatile u32 *cs0_cfg; + volatile u32 *cs1_cfg; + unsigned long cs0_bits; + unsigned long cs1_bits; + void __iomem *cs0; + void __iomem *cs1; +}; + +#define IXP4XX_ETH_NPEA 0x00 +#define IXP4XX_ETH_NPEB 0x10 +#define IXP4XX_ETH_NPEC 0x20 + +/* Information about built-in Ethernet MAC interfaces */ +struct eth_plat_info { + u8 phy; /* MII PHY ID, 0 - 31 */ + u8 rxq; /* configurable, currently 0 - 31 only */ + u8 txreadyq; + u8 hwaddr[6]; +}; + +/* Information about built-in HSS (synchronous serial) interfaces */ +struct hss_plat_info { + int (*set_clock)(int port, unsigned int clock_type); + int (*open)(int port, void *pdev, + void (*set_carrier_cb)(void *pdev, int carrier)); + void (*close)(int port, void *pdev); + u8 txreadyq; +}; + +/* + * Frequency of clock used for primary clocksource + */ +extern unsigned long ixp4xx_timer_freq; + +/* + * Functions used by platform-level setup code + */ +extern void ixp4xx_map_io(void); +extern void ixp4xx_init_early(void); +extern void ixp4xx_init_irq(void); +extern void ixp4xx_sys_init(void); +extern void ixp4xx_timer_init(void); +extern void ixp4xx_restart(enum reboot_mode, const char *); +extern void ixp4xx_pci_preinit(void); +struct pci_sys_data; +extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); +extern struct pci_ops ixp4xx_ops; + +#endif // __ASSEMBLY__ + diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h new file mode 100644 index 00000000000..4de8da536db --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#ifndef IXP4XX_QMGR_H +#define IXP4XX_QMGR_H + +#include <linux/io.h> +#include <linux/kernel.h> + +#define DEBUG_QMGR 0 + +#define HALF_QUEUES 32 +#define QUEUES 64 +#define MAX_QUEUE_LENGTH 4 /* in dwords */ + +#define QUEUE_STAT1_EMPTY 1 /* queue status bits */ +#define QUEUE_STAT1_NEARLY_EMPTY 2 +#define QUEUE_STAT1_NEARLY_FULL 4 +#define QUEUE_STAT1_FULL 8 +#define QUEUE_STAT2_UNDERFLOW 1 +#define QUEUE_STAT2_OVERFLOW 2 + +#define QUEUE_WATERMARK_0_ENTRIES 0 +#define QUEUE_WATERMARK_1_ENTRY 1 +#define QUEUE_WATERMARK_2_ENTRIES 2 +#define QUEUE_WATERMARK_4_ENTRIES 3 +#define QUEUE_WATERMARK_8_ENTRIES 4 +#define QUEUE_WATERMARK_16_ENTRIES 5 +#define QUEUE_WATERMARK_32_ENTRIES 6 +#define QUEUE_WATERMARK_64_ENTRIES 7 + +/* queue interrupt request conditions */ +#define QUEUE_IRQ_SRC_EMPTY 0 +#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1 +#define QUEUE_IRQ_SRC_NEARLY_FULL 2 +#define QUEUE_IRQ_SRC_FULL 3 +#define QUEUE_IRQ_SRC_NOT_EMPTY 4 +#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5 +#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6 +#define QUEUE_IRQ_SRC_NOT_FULL 7 + +struct qmgr_regs { + u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */ + u32 stat1[4]; /* 0x400 - 0x40F */ + u32 stat2[2]; /* 0x410 - 0x417 */ + u32 statne_h; /* 0x418 - queue nearly empty */ + u32 statf_h; /* 0x41C - queue full */ + u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */ + u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */ + u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */ + u32 reserved[1776]; + u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */ +}; + +void qmgr_set_irq(unsigned int queue, int src, + void (*handler)(void *pdev), void *pdev); +void qmgr_enable_irq(unsigned int queue); +void qmgr_disable_irq(unsigned int queue); + +/* request_ and release_queue() must be called from non-IRQ context */ + +#if DEBUG_QMGR +extern char qmgr_queue_descs[QUEUES][32]; + +int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark, + const char *desc_format, const char* name); +#else +int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark); +#define qmgr_request_queue(queue, len, nearly_empty_watermark, \ + nearly_full_watermark, desc_format, name) \ + __qmgr_request_queue(queue, len, nearly_empty_watermark, \ + nearly_full_watermark) +#endif + +void qmgr_release_queue(unsigned int queue); + + +static inline void qmgr_put_entry(unsigned int queue, u32 val) +{ + struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; +#if DEBUG_QMGR + BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ + + printk(KERN_DEBUG "Queue %s(%i) put %X\n", + qmgr_queue_descs[queue], queue, val); +#endif + __raw_writel(val, &qmgr_regs->acc[queue][0]); +} + +static inline u32 qmgr_get_entry(unsigned int queue) +{ + u32 val; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; + val = __raw_readl(&qmgr_regs->acc[queue][0]); +#if DEBUG_QMGR + BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ + + printk(KERN_DEBUG "Queue %s(%i) get %X\n", + qmgr_queue_descs[queue], queue, val); +#endif + return val; +} + +static inline int __qmgr_get_stat1(unsigned int queue) +{ + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; + return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) + >> ((queue & 7) << 2)) & 0xF; +} + +static inline int __qmgr_get_stat2(unsigned int queue) +{ + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; + BUG_ON(queue >= HALF_QUEUES); + return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) + >> ((queue & 0xF) << 1)) & 0x3; +} + +/** + * qmgr_stat_empty() - checks if a hardware queue is empty + * @queue: queue number + * + * Returns non-zero value if the queue is empty. + */ +static inline int qmgr_stat_empty(unsigned int queue) +{ + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY; +} + +/** + * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark + * @queue: queue number + * + * Returns non-zero value if the queue is below low watermark. + */ +static inline int qmgr_stat_below_low_watermark(unsigned int queue) +{ + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statne_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY; +} + +/** + * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark + * @queue: queue number + * + * Returns non-zero value if the queue is above high watermark + */ +static inline int qmgr_stat_above_high_watermark(unsigned int queue) +{ + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL; +} + +/** + * qmgr_stat_full() - checks if a hardware queue is full + * @queue: queue number + * + * Returns non-zero value if the queue is full. + */ +static inline int qmgr_stat_full(unsigned int queue) +{ + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statf_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL; +} + +/** + * qmgr_stat_underflow() - checks if a hardware queue experienced underflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced underflow. + */ +static inline int qmgr_stat_underflow(unsigned int queue) +{ + return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW; +} + +/** + * qmgr_stat_overflow() - checks if a hardware queue experienced overflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced overflow. + */ +static inline int qmgr_stat_overflow(unsigned int queue) +{ + return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW; +} + +#endif diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h new file mode 100644 index 00000000000..7bd8b96c884 --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/udc.h @@ -0,0 +1,8 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/udc.h + * + */ +#include <linux/platform_data/pxa2xx_udc.h> + +extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info); + diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h new file mode 100644 index 00000000000..7b25c0225e4 --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h @@ -0,0 +1,56 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/uncompress.h + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _ARCH_UNCOMPRESS_H_ +#define _ARCH_UNCOMPRESS_H_ + +#include "ixp4xx-regs.h" +#include <asm/mach-types.h> +#include <linux/serial_reg.h> + +#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) + +volatile u32* uart_base; + +static inline void putc(int c) +{ + /* Check THRE and TEMT bits before we transmit the character. + */ + while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) + barrier(); + + *uart_base = c; +} + +static void flush(void) +{ +} + +static __inline__ void __arch_decomp_setup(unsigned long arch_id) +{ + /* + * Some boards are using UART2 as console + */ + if (machine_is_adi_coyote() || machine_is_gtwx5715() || + machine_is_gateway7001() || machine_is_wg302v2() || + machine_is_devixp() || machine_is_miccpt() || machine_is_mic256()) + uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; + else + uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; +} + +/* + * arch_id is a variable in decompress_kernel() + */ +#define arch_decomp_setup() __arch_decomp_setup(arch_id) + +#endif diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index 7d9bb4d2310..318424dd3c5 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-ixp4xx/ixdp425-pci.c + * arch/arm/mach-ixp4xx/ixdp425-pci.c * * IXDP425 board-level PCI initialization * @@ -19,47 +19,50 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/delay.h> - #include <asm/mach/pci.h> #include <asm/irq.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach-types.h> +#define MAX_DEV 4 +#define IRQ_LINES 4 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 + + void __init ixdp425_pci_preinit(void) { - set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW); - + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init ixdp425_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[IXDP425_PCI_IRQ_LINES] = { - IRQ_IXDP425_PCI_INTA, - IRQ_IXDP425_PCI_INTB, - IRQ_IXDP425_PCI_INTC, - IRQ_IXDP425_PCI_INTD + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) }; - int irq = -1; - - if (slot >= 1 && slot <= IXDP425_PCI_MAX_DEV && - pin >= 1 && pin <= IXDP425_PCI_IRQ_LINES) { - irq = pci_irq_table[(slot + pin - 2) % 4]; - } + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % 4]; - return irq; + return -1; } struct hw_pci ixdp425_pci __initdata = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = ixdp425_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = ixdp425_map_irq, }; @@ -72,4 +75,3 @@ int __init ixdp425_pci_init(void) } subsys_initcall(ixdp425_pci_init); - diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 44584afb34a..e7b8befa872 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ixp4xx/ixdp425-setup.c * - * IXDP425/IXCDP1100 board-setup + * IXDP425/IXCDP1100 board-setup * * Copyright (C) 2003-2005 MontaVista Software, Inc. * @@ -14,22 +14,30 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <linux/i2c-gpio.h> #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> - +#include <linux/delay.h> +#include <linux/gpio.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/delay.h> + +#define IXDP425_SDA_PIN 7 +#define IXDP425_SCL_PIN 6 + +/* NAND Flash pins */ +#define IXDP425_NAND_NCE_PIN 12 + +#define IXDP425_NAND_CMD_BYTE 0x01 +#define IXDP425_NAND_ADDR_BYTE 0x02 static struct flash_platform_data ixdp425_flash_data = { .map_name = "cfi_probe", @@ -53,9 +61,6 @@ static struct platform_device ixdp425_flash = { #if defined(CONFIG_MTD_NAND_PLATFORM) || \ defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS -const char *part_probes[] = { "cmdlinepart", NULL }; - static struct mtd_partition ixdp425_partitions[] = { { .name = "ixp400 NAND FS 0", @@ -67,7 +72,6 @@ static struct mtd_partition ixdp425_partitions[] = { .size = MTDPART_SIZ_FULL }, }; -#endif static void ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) @@ -77,10 +81,10 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) if (ctrl & NAND_CTRL_CHANGE) { if (ctrl & NAND_NCE) { - gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW); + gpio_set_value(IXDP425_NAND_NCE_PIN, 0); udelay(5); } else - gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH); + gpio_set_value(IXDP425_NAND_NCE_PIN, 1); offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0; offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0; @@ -93,13 +97,10 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) static struct platform_nand_data ixdp425_flash_nand_data = { .chip = { + .nr_chips = 1, .chip_delay = 30, - .options = NAND_NO_AUTOINCR, -#ifdef CONFIG_MTD_PARTITIONS - .part_probe_types = part_probes, .partitions = ixdp425_partitions, .nr_partitions = ARRAY_SIZE(ixdp425_partitions), -#endif }, .ctrl = { .cmd_ctrl = ixdp425_flash_nand_cmd_ctrl @@ -227,7 +228,8 @@ static void __init ixdp425_init(void) ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3), ixdp425_flash_nand_resource.end = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1; - gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT); + gpio_request(IXDP425_NAND_NCE_PIN, "NAND NCE pin"); + gpio_direction_output(IXDP425_NAND_NCE_PIN, 0); /* Configure expansion bus for NAND Flash */ *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN | @@ -249,51 +251,60 @@ static void __init ixdp425_init(void) #ifdef CONFIG_ARCH_IXDP425 MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END #endif #ifdef CONFIG_MACH_IXDP465 MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif #ifdef CONFIG_ARCH_PRPMC1100 MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif #ifdef CONFIG_MACH_KIXRP435 MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index 37d9f2e8f60..1f8717ba13d 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -19,19 +19,19 @@ #include <linux/irq.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach/pci.h> void __init ixdpg425_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init ixdpg425_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == 12 || slot == 13) return IRQ_IXP4XX_GPIO7; @@ -42,10 +42,9 @@ static int __init ixdpg425_map_irq(struct pci_dev *dev, u8 slot, u8 pin) struct hw_pci ixdpg425_pci __initdata = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = ixdpg425_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = ixdpg425_map_irq, }; diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index 63a23fa4aab..d4eb09a6286 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -20,8 +20,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/slab.h> -#include <asm/arch/npe.h> +#include <mach/npe.h> #define DEBUG_MSG 0 #define DEBUG_FW 0 @@ -117,7 +116,11 @@ /* NPE mailbox_status value for reset */ #define RESET_MBOX_STAT 0x0000F0F0 -const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" }; +#define NPE_A_FIRMWARE "NPE-A" +#define NPE_B_FIRMWARE "NPE-B" +#define NPE_C_FIRMWARE "NPE-C" + +const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE }; #define print_npe(pri, npe, fmt, ...) \ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) @@ -386,15 +389,6 @@ static int npe_reset(struct npe *npe) /* reset the NPE */ ixp4xx_write_feature_bits(val & ~(IXP4XX_FEATURE_RESET_NPEA << npe->id)); - for (i = 0; i < MAX_RETRIES; i++) { - if (!(ixp4xx_read_feature_bits() & - (IXP4XX_FEATURE_RESET_NPEA << npe->id))) - break; /* reset completed */ - udelay(1); - } - if (i == MAX_RETRIES) - return -ETIMEDOUT; - /* deassert reset */ ixp4xx_write_feature_bits(val | (IXP4XX_FEATURE_RESET_NPEA << npe->id)); @@ -575,8 +569,8 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev) for (i = 0; i < image->size; i++) image->data[i] = swab32(image->data[i]); - if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) { - print_npe(KERN_INFO, npe, "IXP46x firmware ignored on " + if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) { + print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on " "IXP42x\n"); goto err; } @@ -596,7 +590,7 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev) "revision 0x%X:%X\n", (image->id >> 16) & 0xFF, (image->id >> 8) & 0xFF, image->id & 0xFF); - if (!cpu_is_ixp46x()) { + if (cpu_is_ixp42x()) { if (!npe->id) instr_size = NPE_A_42X_INSTR_SIZE; else @@ -674,7 +668,7 @@ err: } -struct npe *npe_request(int id) +struct npe *npe_request(unsigned id) { if (id < NPE_COUNT) if (npe_tab[id].valid) @@ -714,7 +708,7 @@ static int __init npe_init_module(void) } if (!found) - return -ENOSYS; + return -ENODEV; return 0; } @@ -734,6 +728,9 @@ module_exit(npe_cleanup_module); MODULE_AUTHOR("Krzysztof Halasa"); MODULE_LICENSE("GPL v2"); +MODULE_FIRMWARE(NPE_A_FIRMWARE); +MODULE_FIRMWARE(NPE_B_FIRMWARE); +MODULE_FIRMWARE(NPE_C_FIRMWARE); EXPORT_SYMBOL(npe_names); EXPORT_SYMBOL(npe_running); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index fab94eaecee..9d1b6b7c394 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -12,64 +12,128 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> -#include <asm/arch/qmgr.h> +#include <mach/qmgr.h> -#define DEBUG 0 - -struct qmgr_regs __iomem *qmgr_regs; +static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ -static void (*irq_handlers[HALF_QUEUES])(void *pdev); -static void *irq_pdevs[HALF_QUEUES]; +static void (*irq_handlers[QUEUES])(void *pdev); +static void *irq_pdevs[QUEUES]; + +#if DEBUG_QMGR +char qmgr_queue_descs[QUEUES][32]; +#endif void qmgr_set_irq(unsigned int queue, int src, void (*handler)(void *pdev), void *pdev) { - u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */ - int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ unsigned long flags; - src &= 7; spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg); + if (queue < HALF_QUEUES) { + u32 __iomem *reg; + int bit; + BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL); + reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */ + bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ + __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), + reg); + } else + /* IRQ source for queues 32-63 is fixed */ + BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY); + irq_handlers[queue] = handler; irq_pdevs[queue] = pdev; spin_unlock_irqrestore(&qmgr_lock, flags); } -static irqreturn_t qmgr_irq1(int irq, void *pdev) +static irqreturn_t qmgr_irq1_a0(int irq, void *pdev) { - int i; - u32 val = __raw_readl(&qmgr_regs->irqstat[0]); - __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */ - - for (i = 0; i < HALF_QUEUES; i++) - if (val & (1 << i)) + int i, ret = 0; + u32 en_bitmap, src, stat; + + /* ACK - it may clear any bits so don't rely on it */ + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]); + + en_bitmap = qmgr_regs->irqen[0]; + while (en_bitmap) { + i = __fls(en_bitmap); /* number of the last "low" queue */ + en_bitmap &= ~BIT(i); + src = qmgr_regs->irqsrc[i >> 3]; + stat = qmgr_regs->stat1[i >> 3]; + if (src & 4) /* the IRQ condition is inverted */ + stat = ~stat; + if (stat & BIT(src & 3)) { irq_handlers[i](irq_pdevs[i]); + ret = IRQ_HANDLED; + } + } + return ret; +} + - return val ? IRQ_HANDLED : 0; +static irqreturn_t qmgr_irq2_a0(int irq, void *pdev) +{ + int i, ret = 0; + u32 req_bitmap; + + /* ACK - it may clear any bits so don't rely on it */ + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]); + + req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h; + while (req_bitmap) { + i = __fls(req_bitmap); /* number of the last "high" queue */ + req_bitmap &= ~BIT(i); + irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]); + ret = IRQ_HANDLED; + } + return ret; +} + + +static irqreturn_t qmgr_irq(int irq, void *pdev) +{ + int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1); + u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]); + + if (!req_bitmap) + return 0; + __raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */ + + while (req_bitmap) { + i = __fls(req_bitmap); /* number of the last queue */ + req_bitmap &= ~BIT(i); + i += half * HALF_QUEUES; + irq_handlers[i](irq_pdevs[i]); + } + return IRQ_HANDLED; } void qmgr_enable_irq(unsigned int queue) { unsigned long flags; + int half = queue / 32; + u32 mask = 1 << (queue & (HALF_QUEUES - 1)); spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue), - &qmgr_regs->irqen[0]); + __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask, + &qmgr_regs->irqen[half]); spin_unlock_irqrestore(&qmgr_lock, flags); } void qmgr_disable_irq(unsigned int queue) { unsigned long flags; + int half = queue / 32; + u32 mask = 1 << (queue & (HALF_QUEUES - 1)); spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue), - &qmgr_regs->irqen[0]); + __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask, + &qmgr_regs->irqen[half]); + __raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */ spin_unlock_irqrestore(&qmgr_lock, flags); } @@ -81,15 +145,21 @@ static inline void shift_mask(u32 *mask) mask[0] <<= 1; } +#if DEBUG_QMGR int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, unsigned int nearly_empty_watermark, - unsigned int nearly_full_watermark) + unsigned int nearly_full_watermark, + const char *desc_format, const char* name) +#else +int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark) +#endif { u32 cfg, addr = 0, mask[4]; /* in 16-dwords */ int err; - if (queue >= HALF_QUEUES) - return -ERANGE; + BUG_ON(queue >= QUEUES); if ((nearly_empty_watermark | nearly_full_watermark) & ~7) return -EINVAL; @@ -151,12 +221,13 @@ int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, used_sram_bitmap[2] |= mask[2]; used_sram_bitmap[3] |= mask[3]; __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]); - spin_unlock_irq(&qmgr_lock); - -#if DEBUG - printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n", - queue, addr); +#if DEBUG_QMGR + snprintf(qmgr_queue_descs[queue], sizeof(qmgr_queue_descs[0]), + desc_format, name); + printk(KERN_DEBUG "qmgr: requested queue %s(%i) addr = 0x%02X\n", + qmgr_queue_descs[queue], queue, addr); #endif + spin_unlock_irq(&qmgr_lock); return 0; err: @@ -169,7 +240,7 @@ void qmgr_release_queue(unsigned int queue) { u32 cfg, addr, mask[4]; - BUG_ON(queue >= HALF_QUEUES); /* not in valid range */ + BUG_ON(queue >= QUEUES); /* not in valid range */ spin_lock_irq(&qmgr_lock); cfg = __raw_readl(&qmgr_regs->sram[queue]); @@ -189,6 +260,16 @@ void qmgr_release_queue(unsigned int queue) while (addr--) shift_mask(mask); +#if DEBUG_QMGR + printk(KERN_DEBUG "qmgr: releasing queue %s(%i)\n", + qmgr_queue_descs[queue], queue); + qmgr_queue_descs[queue][0] = '\x0'; +#endif + + while ((addr = qmgr_get_entry(queue))) + printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", + queue, addr); + __raw_writel(0, &qmgr_regs->sram[queue]); used_sram_bitmap[0] &= ~mask[0]; @@ -199,26 +280,19 @@ void qmgr_release_queue(unsigned int queue) spin_unlock_irq(&qmgr_lock); module_put(THIS_MODULE); -#if DEBUG - printk(KERN_DEBUG "qmgr: released queue %i\n", queue); -#endif } static int qmgr_init(void) { int i, err; + irq_handler_t handler1, handler2; + mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE, "IXP4xx Queue Manager"); if (mem_res == NULL) return -EBUSY; - qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); - if (qmgr_regs == NULL) { - err = -ENOMEM; - goto error_map; - } - /* reset qmgr registers */ for (i = 0; i < 4; i++) { __raw_writel(0x33333333, &qmgr_regs->stat1[i]); @@ -230,26 +304,43 @@ static int qmgr_init(void) __raw_writel(0, &qmgr_regs->irqen[i]); } + __raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h); + __raw_writel(0, &qmgr_regs->statf_h); + for (i = 0; i < QUEUES; i++) __raw_writel(0, &qmgr_regs->sram[i]); - err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0, - "IXP4xx Queue Manager", NULL); + if (cpu_is_ixp42x_rev_a0()) { + handler1 = qmgr_irq1_a0; + handler2 = qmgr_irq2_a0; + } else + handler1 = handler2 = qmgr_irq; + + err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager", + NULL); if (err) { - printk(KERN_ERR "qmgr: failed to request IRQ%i\n", - IRQ_IXP4XX_QM1); + printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", + IRQ_IXP4XX_QM1, err); goto error_irq; } + err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager", + NULL); + if (err) { + printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", + IRQ_IXP4XX_QM2, err); + goto error_irq2; + } + used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */ spin_lock_init(&qmgr_lock); printk(KERN_INFO "IXP4xx Queue Manager initialized.\n"); return 0; +error_irq2: + free_irq(IRQ_IXP4XX_QM1, NULL); error_irq: - iounmap(qmgr_regs); -error_map: release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); return err; } @@ -257,8 +348,9 @@ error_map: static void qmgr_remove(void) { free_irq(IRQ_IXP4XX_QM1, NULL); + free_irq(IRQ_IXP4XX_QM2, NULL); synchronize_irq(IRQ_IXP4XX_QM1); - iounmap(qmgr_regs); + synchronize_irq(IRQ_IXP4XX_QM2); release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); } @@ -268,9 +360,13 @@ module_exit(qmgr_remove); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Krzysztof Halasa"); -EXPORT_SYMBOL(qmgr_regs); EXPORT_SYMBOL(qmgr_set_irq); EXPORT_SYMBOL(qmgr_enable_irq); EXPORT_SYMBOL(qmgr_disable_irq); +#if DEBUG_QMGR +EXPORT_SYMBOL(qmgr_queue_descs); EXPORT_SYMBOL(qmgr_request_queue); +#else +EXPORT_SYMBOL(__qmgr_request_queue); +#endif EXPORT_SYMBOL(qmgr_release_queue); diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c new file mode 100644 index 00000000000..d114ccd2017 --- /dev/null +++ b/arch/arm/mach-ixp4xx/miccpt-pci.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-ixp4xx/miccpt-pci.c + * + * MICCPT board-level PCI initialization + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * Copyright (C) 2006 OMICRON electronics GmbH + * + * Author: Michael Jochum <michael.jochum@omicron.at> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <asm/mach/pci.h> +#include <asm/irq.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#define MAX_DEV 4 +#define IRQ_LINES 4 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 1 +#define INTB 2 +#define INTC 3 +#define INTD 4 + + +void __init miccpt_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) + }; + + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % 4]; + + return -1; +} + +struct hw_pci miccpt_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = miccpt_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = miccpt_map_irq, +}; + +int __init miccpt_pci_init(void) +{ + if (machine_is_miccpt()) + pci_common_init(&miccpt_pci); + return 0; +} + +subsys_initcall(miccpt_pci_init); diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index 1088426fdce..8f0eba0a680 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -18,45 +18,49 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/mach/pci.h> #include <asm/mach-types.h> +#define MAX_DEV 3 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 +#define INTE 7 + void __init nas100d_pci_preinit(void) { - set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW); - + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[NAS100D_PCI_MAX_DEV][NAS100D_PCI_IRQ_LINES] = - { - { IRQ_NAS100D_PCI_INTA, -1, -1 }, - { IRQ_NAS100D_PCI_INTB, -1, -1 }, - { IRQ_NAS100D_PCI_INTC, IRQ_NAS100D_PCI_INTD, IRQ_NAS100D_PCI_INTE }, + static int pci_irq_table[MAX_DEV][IRQ_LINES] = { + { IXP4XX_GPIO_IRQ(INTA), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTB), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTC), IXP4XX_GPIO_IRQ(INTD), + IXP4XX_GPIO_IRQ(INTE) }, }; - int irq = -1; - - if (slot >= 1 && slot <= NAS100D_PCI_MAX_DEV && - pin >= 1 && pin <= NAS100D_PCI_IRQ_LINES) - irq = pci_irq_table[slot-1][pin-1]; + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[slot - 1][pin - 1]; - return irq; + return -1; } struct hw_pci __initdata nas100d_pci = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = nas100d_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = nas100d_map_irq, }; diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 84b5e62a9c0..4e0f762bc65 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -17,7 +17,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/jiffies.h> @@ -28,12 +28,25 @@ #include <linux/reboot.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> - +#include <linux/io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/io.h> -#include <asm/gpio.h> + +#define NAS100D_SDA_PIN 5 +#define NAS100D_SCL_PIN 6 + +/* Buttons */ +#define NAS100D_PB_GPIO 14 /* power button */ +#define NAS100D_RB_GPIO 4 /* reset button */ + +/* Power control */ +#define NAS100D_PO_GPIO 12 /* power off */ + +/* LEDs */ +#define NAS100D_LED_WLAN_GPIO 0 +#define NAS100D_LED_DISK_GPIO 3 +#define NAS100D_LED_PWR_GPIO 15 static struct flash_platform_data nas100d_flash_data = { .map_name = "cfi_probe", @@ -171,11 +184,8 @@ static void nas100d_power_off(void) { /* This causes the box to drop the power and go dead. */ - /* enable the pwr cntl gpio */ - gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT); - - /* do the deed */ - gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH); + /* enable the pwr cntl gpio and assert power off */ + gpio_direction_output(NAS100D_PO_GPIO, 1); } /* This is used to make sure the power-button pusher is serious. The button @@ -212,7 +222,7 @@ static void nas100d_power_handler(unsigned long data) ctrl_alt_del(); /* Change the state of the power LED to "blink" */ - gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + gpio_set_value(NAS100D_LED_PWR_GPIO, 0); } else { power_button_countdown = PBUTTON_HOLDDOWN_COUNT; } @@ -229,9 +239,35 @@ static irqreturn_t nas100d_reset_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static int __init nas100d_gpio_init(void) +{ + if (!machine_is_nas100d()) + return 0; + + /* + * The power button on the Iomega NAS100d is on GPIO 14, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Request the power off GPIO */ + gpio_request(NAS100D_PO_GPIO, "power off"); + + /* Make sure that the power button GPIO is set up as an input */ + gpio_request(NAS100D_PB_GPIO, "power button"); + gpio_direction_input(NAS100D_PB_GPIO); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); + + return 0; +} +device_initcall(nas100d_gpio_init); + static void __init nas100d_init(void) { - DECLARE_MAC_BUF(mac_buf); uint8_t __iomem *f; int i; @@ -259,26 +295,12 @@ static void __init nas100d_init(void) pm_power_off = nas100d_power_off; if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "NAS100D reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(NAS100D_RB_GPIO)); } - /* The power button on the Iomega NAS100d is on GPIO 14, but - * it cannot handle interrupts on that GPIO line. So we'll - * have to poll it with a kernel timer. - */ - - /* Make sure that the power button GPIO is set up as an input */ - gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN); - - /* Set the initial value for the power button IRQ handler */ - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - - mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); - /* * Map in a portion of the flash and read the MAC address. * Since it is stored in BE in the flash itself, we need to @@ -294,18 +316,21 @@ static void __init nas100d_init(void) #endif iounmap(f); } - printk(KERN_INFO "NAS100D: Using MAC address %s for port 0\n", - print_mac(mac_buf, nas100d_plat_eth[0].hwaddr)); + printk(KERN_INFO "NAS100D: Using MAC address %pM for port 0\n", + nas100d_plat_eth[0].hwaddr); } MACHINE_START(NAS100D, "Iomega NAS 100d") /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .init_machine = nas100d_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 4429b8448b6..032defe111a 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -18,43 +18,45 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/mach/pci.h> #include <asm/mach-types.h> +#define MAX_DEV 3 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 + void __init nslu2_pci_preinit(void) { - set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { - IRQ_NSLU2_PCI_INTA, - IRQ_NSLU2_PCI_INTB, - IRQ_NSLU2_PCI_INTC, + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), }; - int irq = -1; - - if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && - pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { - irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; - } + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % IRQ_LINES]; - return irq; + return -1; } struct hw_pci __initdata nslu2_pci = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = nslu2_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = nslu2_map_irq, }; diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index a48a6655b88..88c025f52d8 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -16,7 +16,7 @@ * Maintainers: http://www.nslu2-linux.org/ * */ - +#include <linux/gpio.h> #include <linux/if_ether.h> #include <linux/irq.h> #include <linux/serial.h> @@ -25,13 +25,31 @@ #include <linux/reboot.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> - +#include <linux/io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <asm/io.h> -#include <asm/gpio.h> + +#define NSLU2_SDA_PIN 7 +#define NSLU2_SCL_PIN 6 + +/* NSLU2 Timer */ +#define NSLU2_FREQ 66000000 + +/* Buttons */ +#define NSLU2_PB_GPIO 5 /* power button */ +#define NSLU2_PO_GPIO 8 /* power off */ +#define NSLU2_RB_GPIO 12 /* reset button */ + +/* Buzzer */ +#define NSLU2_GPIO_BUZZ 4 + +/* LEDs */ +#define NSLU2_LED_RED_GPIO 0 +#define NSLU2_LED_GRN_GPIO 1 +#define NSLU2_LED_DISK1_GPIO 3 +#define NSLU2_LED_DISK2_GPIO 2 static struct flash_platform_data nslu2_flash_data = { .map_name = "cfi_probe", @@ -179,11 +197,8 @@ static void nslu2_power_off(void) { /* This causes the box to drop the power and go dead. */ - /* enable the pwr cntl gpio */ - gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT); - - /* do the deed */ - gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); + /* enable the pwr cntl gpio and assert power off */ + gpio_direction_output(NSLU2_PO_GPIO, 1); } static irqreturn_t nslu2_power_handler(int irq, void *dev_id) @@ -205,6 +220,16 @@ static irqreturn_t nslu2_reset_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static int __init nslu2_gpio_init(void) +{ + if (!machine_is_nslu2()) + return 0; + + /* Request the power off GPIO */ + return gpio_request(NSLU2_PO_GPIO, "power off"); +} +device_initcall(nslu2_gpio_init); + static void __init nslu2_timer_init(void) { /* The xtal on this machine is non-standard. */ @@ -214,13 +239,8 @@ static void __init nslu2_timer_init(void) ixp4xx_timer_init(); } -static struct sys_timer nslu2_timer = { - .init = nslu2_timer_init, -}; - static void __init nslu2_init(void) { - DECLARE_MAC_BUF(mac_buf); uint8_t __iomem *f; int i; @@ -245,16 +265,14 @@ static void __init nslu2_init(void) pm_power_off = nslu2_power_off; if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "NSLU2 reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(NSLU2_RB_GPIO)); } if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler, - IRQF_DISABLED | IRQF_TRIGGER_HIGH, - "NSLU2 power button", NULL) < 0) { + IRQF_TRIGGER_HIGH, "NSLU2 power button", NULL) < 0) { printk(KERN_DEBUG "Power Button IRQ %d not available\n", gpio_to_irq(NSLU2_PB_GPIO)); @@ -275,18 +293,21 @@ static void __init nslu2_init(void) #endif iounmap(f); } - printk(KERN_INFO "NSLU2: Using MAC address %s for port 0\n", - print_mac(mac_buf, nslu2_plat_eth[0].hwaddr)); + printk(KERN_INFO "NSLU2: Using MAC address %pM for port 0\n", + nslu2_plat_eth[0].hwaddr); } MACHINE_START(NSLU2, "Linksys NSLU2") /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, - .boot_params = 0x00000100, + .atag_offset = 0x100, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &nslu2_timer, + .init_time = nslu2_timer_init, .init_machine = nslu2_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c new file mode 100644 index 00000000000..2d494b45437 --- /dev/null +++ b/arch/arm/mach-ixp4xx/omixp-setup.c @@ -0,0 +1,279 @@ +/* + * arch/arm/mach-ixp4xx/omixp-setup.c + * + * omicron ixp4xx board setup + * Copyright (C) 2009 OMICRON electronics GmbH + * + * based nslu2-setup.c, ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/leds.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +#include <mach/hardware.h> + +static struct resource omixp_flash_resources[] = { + { + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition omixp_partitions[] = { + { + .name = "Recovery Bootloader", + .size = 0x00020000, + .offset = 0, + }, { + .name = "Calibration Data", + .size = 0x00020000, + .offset = 0x00020000, + }, { + .name = "Recovery FPGA", + .size = 0x00020000, + .offset = 0x00040000, + }, { + .name = "Release Bootloader", + .size = 0x00020000, + .offset = 0x00060000, + }, { + .name = "Release FPGA", + .size = 0x00020000, + .offset = 0x00080000, + }, { + .name = "Kernel", + .size = 0x00160000, + .offset = 0x000a0000, + }, { + .name = "Filesystem", + .size = 0x00C00000, + .offset = 0x00200000, + }, { + .name = "Persistent Storage", + .size = 0x00200000, + .offset = 0x00E00000, + }, +}; + +static struct flash_platform_data omixp_flash_data[] = { + { + .map_name = "cfi_probe", + .parts = omixp_partitions, + .nr_parts = ARRAY_SIZE(omixp_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + }, +}; + +static struct platform_device omixp_flash_device[] = { + { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &omixp_flash_data[0], + }, + .resource = &omixp_flash_resources[0], + .num_resources = 1, + }, { + .name = "IXP4XX-Flash", + .id = 1, + .dev = { + .platform_data = &omixp_flash_data[1], + }, + .resource = &omixp_flash_resources[1], + .num_resources = 1, + }, +}; + +/* Swap UART's - These boards have the console on UART2. The following + * configuration is used: + * ttyS0 .. UART2 + * ttyS1 .. UART1 + * This way standard images can be used with the kernel that expect + * the console on ttyS0. + */ +static struct resource omixp_uart_resources[] = { + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct plat_serial8250_port omixp_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, { + /* list termination */ + } +}; + +static struct platform_device omixp_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = omixp_uart_data, + .num_resources = 2, + .resource = omixp_uart_resources, +}; + +static struct gpio_led mic256_led_pins[] = { + { + .name = "LED-A", + .gpio = 7, + }, +}; + +static struct gpio_led_platform_data mic256_led_data = { + .num_leds = ARRAY_SIZE(mic256_led_pins), + .leds = mic256_led_pins, +}; + +static struct platform_device mic256_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &mic256_led_data, +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info ixdp425_plat_eth[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + }, +}; + +static struct platform_device ixdp425_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = ixdp425_plat_eth, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = ixdp425_plat_eth + 1, + }, +}; + + +static struct platform_device *devixp_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static struct platform_device *mic256_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &mic256_leds, + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static struct platform_device *miccpt_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &omixp_flash_device[1], + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static void __init omixp_init(void) +{ + ixp4xx_sys_init(); + + /* 16MiB Boot Flash */ + omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0); + omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0); + + /* 32 MiB Data Flash */ + omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2); + omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2); + + if (machine_is_devixp()) + platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev)); + else if (machine_is_miccpt()) + platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev)); + else if (machine_is_mic256()) + platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev)); +} + +#ifdef CONFIG_MACH_DEVIXP +MACHINE_START(DEVIXP, "Omicron DEVIXP") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .init_machine = omixp_init, + .restart = ixp4xx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_MICCPT +MACHINE_START(MICCPT, "Omicron MICCPT") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .init_machine = omixp_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_MIC256 +MACHINE_START(MIC256, "Omicron MIC256") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .init_machine = omixp_init, + .restart = ixp4xx_restart, +MACHINE_END +#endif diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c new file mode 100644 index 00000000000..a4220fa5e0c --- /dev/null +++ b/arch/arm/mach-ixp4xx/vulcan-pci.c @@ -0,0 +1,72 @@ +/* + * arch/arch/mach-ixp4xx/vulcan-pci.c + * + * Vulcan board-level PCI initialization + * + * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org> + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 2 +#define INTB 3 + +void __init vulcan_pci_preinit(void) +{ +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + /* + * Cardbus bridge wants way more than the SoC can actually offer, + * and leaves the whole PCI bus in a mess. Artificially limit it + * to 8MB per region. Of course indirect mode doesn't have this + * limitation... + */ + pci_cardbus_mem_size = SZ_8M; + pr_info("Vulcan PCI: limiting CardBus memory size to %dMB\n", + (int)(pci_cardbus_mem_size >> 20)); +#endif + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init vulcan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 1) + return IXP4XX_GPIO_IRQ(INTA); + + if (slot == 2) + return IXP4XX_GPIO_IRQ(INTB); + + return -1; +} + +struct hw_pci vulcan_pci __initdata = { + .nr_controllers = 1, + .ops = &ixp4xx_ops, + .preinit = vulcan_pci_preinit, + .setup = ixp4xx_setup, + .map_irq = vulcan_map_irq, +}; + +int __init vulcan_pci_init(void) +{ + if (machine_is_arcom_vulcan()) + pci_common_init(&vulcan_pci); + return 0; +} + +subsys_initcall(vulcan_pci_init); diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c new file mode 100644 index 00000000000..d599e354ca5 --- /dev/null +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -0,0 +1,250 @@ +/* + * arch/arm/mach-ixp4xx/vulcan-setup.c + * + * Arcom/Eurotech Vulcan board-setup + * + * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org> + * + * based on fsg-setup.c: + * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au> + */ + +#include <linux/if_ether.h> +#include <linux/irq.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/io.h> +#include <linux/w1-gpio.h> +#include <linux/mtd/plat-ram.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data vulcan_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource vulcan_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &vulcan_flash_data, + }, + .resource = &vulcan_flash_resource, + .num_resources = 1, +}; + +static struct platdata_mtd_ram vulcan_sram_data = { + .mapname = "Vulcan SRAM", + .bankwidth = 1, +}; + +static struct resource vulcan_sram_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_sram = { + .name = "mtd-ram", + .id = 0, + .dev = { + .platform_data = &vulcan_sram_data, + }, + .resource = &vulcan_sram_resource, + .num_resources = 1, +}; + +static struct resource vulcan_uart_resources[] = { + [0] = { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [2] = { + .flags = IORESOURCE_MEM, + }, +}; + +static struct plat_serial8250_port vulcan_uart_data[] = { + [0] = { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + [1] = { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + [2] = { + .irq = IXP4XX_GPIO_IRQ(4), + .irqflags = IRQF_TRIGGER_LOW, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .uartclk = 1843200, + }, + [3] = { + .irq = IXP4XX_GPIO_IRQ(4), + .irqflags = IRQF_TRIGGER_LOW, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .uartclk = 1843200, + }, + { } +}; + +static struct platform_device vulcan_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = vulcan_uart_data, + }, + .resource = vulcan_uart_resources, + .num_resources = ARRAY_SIZE(vulcan_uart_resources), +}; + +static struct eth_plat_info vulcan_plat_eth[] = { + [0] = { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, + [1] = { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + }, +}; + +static struct platform_device vulcan_eth[] = { + [0] = { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev = { + .platform_data = &vulcan_plat_eth[0], + }, + }, + [1] = { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev = { + .platform_data = &vulcan_plat_eth[1], + }, + }, +}; + +static struct resource vulcan_max6369_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vulcan_max6369 = { + .name = "max6369_wdt", + .id = -1, + .resource = &vulcan_max6369_resource, + .num_resources = 1, +}; + +static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { + .pin = 14, + .ext_pullup_enable_pin = -EINVAL, +}; + +static struct platform_device vulcan_w1_gpio = { + .name = "w1-gpio", + .id = 0, + .dev = { + .platform_data = &vulcan_w1_gpio_pdata, + }, +}; + +static struct platform_device *vulcan_devices[] __initdata = { + &vulcan_uart, + &vulcan_flash, + &vulcan_sram, + &vulcan_max6369, + &vulcan_eth[0], + &vulcan_eth[1], + &vulcan_w1_gpio, +}; + +static void __init vulcan_init(void) +{ + ixp4xx_sys_init(); + + /* Flash is spread over both CS0 and CS1 */ + vulcan_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + vulcan_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + *IXP4XX_EXP_CS0 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(3) | + IXP4XX_EXP_BUS_SIZE(0xF) | + IXP4XX_EXP_BUS_BYTE_RD16 | + IXP4XX_EXP_BUS_WR_EN; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + /* SRAM on CS2, (256kB, 8bit, writable) */ + vulcan_sram_resource.start = IXP4XX_EXP_BUS_BASE(2); + vulcan_sram_resource.end = IXP4XX_EXP_BUS_BASE(2) + SZ_256K - 1; + *IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(1) | + IXP4XX_EXP_BUS_HOLD_T(2) | + IXP4XX_EXP_BUS_SIZE(9) | + IXP4XX_EXP_BUS_SPLT_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* XR16L2551 on CS3 (Moto style, 512 bytes, 8bits, writable) */ + vulcan_uart_resources[2].start = IXP4XX_EXP_BUS_BASE(3); + vulcan_uart_resources[2].end = IXP4XX_EXP_BUS_BASE(3) + 16 - 1; + vulcan_uart_data[2].mapbase = vulcan_uart_resources[2].start; + vulcan_uart_data[3].mapbase = vulcan_uart_data[2].mapbase + 8; + *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_STROBE_T(3) | + IXP4XX_EXP_BUS_CYCLES(IXP4XX_EXP_BUS_CYCLES_MOTOROLA)| + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* GPIOS on CS4 (512 bytes, 8bits, writable) */ + *IXP4XX_EXP_CS4 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + /* max6369 on CS5 (512 bytes, 8bits, writable) */ + vulcan_max6369_resource.start = IXP4XX_EXP_BUS_BASE(5); + vulcan_max6369_resource.end = IXP4XX_EXP_BUS_BASE(5); + *IXP4XX_EXP_CS5 = IXP4XX_EXP_BUS_CS_EN | + IXP4XX_EXP_BUS_WR_EN | + IXP4XX_EXP_BUS_BYTE_EN; + + platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices)); +} + +MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") + /* Maintainer: Marc Zyngier <maz@misterjones.org> */ + .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = vulcan_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c index 0f00feab67f..c92e5b82af3 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-pci.c +++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -23,19 +23,19 @@ #include <linux/irq.h> #include <asm/mach-types.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/mach/pci.h> void __init wg302v2_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } -static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == 1) return IRQ_IXP4XX_GPIO8; @@ -46,10 +46,9 @@ static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) struct hw_pci wg302v2_pci __initdata = { .nr_controllers = 1, + .ops = &ixp4xx_ops, .preinit = wg302v2_pci_preinit, - .swizzle = pci_std_swizzle, .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, .map_irq = wg302v2_map_irq, }; diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index f7e09ad804e..8f9ea2f3a9a 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -18,12 +18,11 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -98,12 +97,15 @@ static void __init wg302v2_init(void) #ifdef CONFIG_MACH_WG302V2 MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, + .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, .init_machine = wg302v2_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, MACHINE_END #endif |