aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-ixp2000/enp2611.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ixp2000/enp2611.c')
-rw-r--r--arch/arm/mach-ixp2000/enp2611.c265
1 files changed, 0 insertions, 265 deletions
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
deleted file mode 100644
index 4867f408617..00000000000
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/enp2611.c
- *
- * Radisys ENP-2611 support.
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The
- * original version carries the following notices:
- *
- * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2003 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-/*************************************************************************
- * ENP-2611 timer tick configuration
- *************************************************************************/
-static void __init enp2611_timer_init(void)
-{
- ixp2000_init_time(50 * 1000 * 1000);
-}
-
-static struct sys_timer enp2611_timer = {
- .init = enp2611_timer_init,
- .offset = ixp2000_gettimeoffset,
-};
-
-
-/*************************************************************************
- * ENP-2611 I/O
- *************************************************************************/
-static struct map_desc enp2611_io_desc[] __initdata = {
- {
- .virtual = ENP2611_CALEB_VIRT_BASE,
- .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
- .length = ENP2611_CALEB_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = ENP2611_PM3386_0_VIRT_BASE,
- .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
- .length = ENP2611_PM3386_0_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = ENP2611_PM3386_1_VIRT_BASE,
- .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
- .length = ENP2611_PM3386_1_SIZE,
- .type = MT_DEVICE,
- }
-};
-
-void __init enp2611_map_io(void)
-{
- ixp2000_map_io();
- iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc));
-}
-
-
-/*************************************************************************
- * ENP-2611 PCI
- *************************************************************************/
-static int enp2611_pci_setup(int nr, struct pci_sys_data *sys)
-{
- sys->mem_offset = 0xe0000000;
- ixp2000_pci_setup(nr, sys);
- return 1;
-}
-
-static void __init enp2611_pci_preinit(void)
-{
- ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
- ixp2000_pci_preinit();
- pcibios_setup("firmware");
-}
-
-static inline int enp2611_pci_valid_device(struct pci_bus *bus,
- unsigned int devfn)
-{
- /* The 82559 ethernet controller appears at both PCI:1:0:0 and
- * PCI:1:2:0, so let's pretend the second one isn't there.
- */
- if (bus->number == 0x01 && devfn == 0x10)
- return 0;
-
- return 1;
-}
-
-static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *value)
-{
- if (enp2611_pci_valid_device(bus, devfn))
- return ixp2000_pci_read_config(bus, devfn, where, size, value);
-
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 value)
-{
- if (enp2611_pci_valid_device(bus, devfn))
- return ixp2000_pci_write_config(bus, devfn, where, size, value);
-
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops enp2611_pci_ops = {
- .read = enp2611_pci_read_config,
- .write = enp2611_pci_write_config
-};
-
-static struct pci_bus * __init enp2611_pci_scan_bus(int nr,
- struct pci_sys_data *sys)
-{
- return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys,
- &sys->resources);
-}
-
-static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot,
- u8 pin)
-{
- int irq;
-
- if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) {
- /* IXP2400. */
- irq = IRQ_IXP2000_PCIA;
- } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) {
- /* 21555 non-transparent bridge. */
- irq = IRQ_IXP2000_PCIB;
- } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) {
- /* PCI2050B transparent bridge. */
- irq = -1;
- } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) {
- /* 82559 ethernet. */
- irq = IRQ_IXP2000_PCIA;
- } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) {
- /* SPI-3 option board. */
- irq = IRQ_IXP2000_PCIB;
- } else {
- printk(KERN_ERR "enp2611_pci_map_irq() called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-struct hw_pci enp2611_pci __initdata = {
- .nr_controllers = 1,
- .setup = enp2611_pci_setup,
- .preinit = enp2611_pci_preinit,
- .scan = enp2611_pci_scan_bus,
- .map_irq = enp2611_pci_map_irq,
-};
-
-int __init enp2611_pci_init(void)
-{
- if (machine_is_enp2611())
- pci_common_init(&enp2611_pci);
-
- return 0;
-}
-
-subsys_initcall(enp2611_pci_init);
-
-
-/*************************************************************************
- * ENP-2611 Machine Initialization
- *************************************************************************/
-static struct flash_platform_data enp2611_flash_platform_data = {
- .map_name = "cfi_probe",
- .width = 1,
-};
-
-static struct ixp2000_flash_data enp2611_flash_data = {
- .platform_data = &enp2611_flash_platform_data,
- .nr_banks = 1
-};
-
-static struct resource enp2611_flash_resource = {
- .start = 0xc4000000,
- .end = 0xc4000000 + 0x00ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device enp2611_flash = {
- .name = "IXP2000-Flash",
- .id = 0,
- .dev = {
- .platform_data = &enp2611_flash_data,
- },
- .num_resources = 1,
- .resource = &enp2611_flash_resource,
-};
-
-static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = {
- .sda_pin = ENP2611_GPIO_SDA,
- .scl_pin = ENP2611_GPIO_SCL,
-};
-
-static struct platform_device enp2611_i2c_controller = {
- .name = "IXP2000-I2C",
- .id = 0,
- .dev = {
- .platform_data = &enp2611_i2c_gpio_pins
- },
- .num_resources = 0
-};
-
-static struct platform_device *enp2611_devices[] __initdata = {
- &enp2611_flash,
- &enp2611_i2c_controller
-};
-
-static void __init enp2611_init_machine(void)
-{
- platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices));
- ixp2000_uart_init();
-}
-
-
-MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .atag_offset = 0x100,
- .map_io = enp2611_map_io,
- .init_irq = ixp2000_init_irq,
- .timer = &enp2611_timer,
- .init_machine = enp2611_init_machine,
- .restart = ixp2000_restart,
-MACHINE_END
-
-
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-02 06:42:08 +0000