diff options
Diffstat (limited to 'arch/arm/mach-imx')
41 files changed, 5651 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c new file mode 100644 index 00000000000..5c10ad05df7 --- /dev/null +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -0,0 +1,213 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/smsc911x.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> + +#include <mach/hardware.h> + +/* LAN9217 ethernet base address */ +#define LAN9217_BASE_ADDR(n) (n + 0x0) +/* External UART */ +#define UARTA_BASE_ADDR(n) (n + 0x8000) +#define UARTB_BASE_ADDR(n) (n + 0x10000) + +#define BOARD_IO_ADDR(n) (n + 0x20000) +/* LED switchs */ +#define LED_SWITCH_REG 0x00 +/* buttons */ +#define SWITCH_BUTTONS_REG 0x08 +/* status, interrupt */ +#define INTR_STATUS_REG 0x10 +#define INTR_MASK_REG 0x38 +#define INTR_RESET_REG 0x20 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER1_REG 0x40 +#define MAGIC_NUMBER2_REG 0x48 +/* CPLD code version */ +#define CPLD_CODE_VER_REG 0x50 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER3_REG 0x58 +/* module reset register*/ +#define MODULE_RESET_REG 0x60 +/* CPU ID and Personality ID */ +#define MCU_BOARD_ID_REG 0x68 + +#define MXC_MAX_EXP_IO_LINES 16 + +/* interrupts like external uart , external ethernet etc*/ +#define EXPIO_INT_ENET 0 +#define EXPIO_INT_XUART_A 1 +#define EXPIO_INT_XUART_B 2 +#define EXPIO_INT_BUTTON_A 3 +#define EXPIO_INT_BUTTON_B 4 + +static void __iomem *brd_io; +static struct irq_domain *domain; + +static struct resource smsc911x_resources[] = { + { + .flags = IORESOURCE_MEM, + } , { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY, +}; + +static struct platform_device smsc_lan9217_device = { + .name = "smsc911x", + .id = -1, + .dev = { + .platform_data = &smsc911x_config, + }, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; + +static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 imr_val; + u32 int_valid; + u32 expio_irq; + + /* irq = gpio irq number */ + desc->irq_data.chip->irq_mask(&desc->irq_data); + + imr_val = __raw_readw(brd_io + INTR_MASK_REG); + int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; + + expio_irq = 0; + for (; int_valid != 0; int_valid >>= 1, expio_irq++) { + if ((int_valid & 1) == 0) + continue; + generic_handle_irq(irq_find_mapping(domain, expio_irq)); + } + + desc->irq_data.chip->irq_ack(&desc->irq_data); + desc->irq_data.chip->irq_unmask(&desc->irq_data); +} + +/* + * Disable an expio pin's interrupt by setting the bit in the imr. + * Irq is an expio virtual irq number + */ +static void expio_mask_irq(struct irq_data *d) +{ + u16 reg; + u32 expio = d->hwirq; + + reg = __raw_readw(brd_io + INTR_MASK_REG); + reg |= (1 << expio); + __raw_writew(reg, brd_io + INTR_MASK_REG); +} + +static void expio_ack_irq(struct irq_data *d) +{ + u32 expio = d->hwirq; + + __raw_writew(1 << expio, brd_io + INTR_RESET_REG); + __raw_writew(0, brd_io + INTR_RESET_REG); + expio_mask_irq(d); +} + +static void expio_unmask_irq(struct irq_data *d) +{ + u16 reg; + u32 expio = d->hwirq; + + reg = __raw_readw(brd_io + INTR_MASK_REG); + reg &= ~(1 << expio); + __raw_writew(reg, brd_io + INTR_MASK_REG); +} + +static struct irq_chip expio_irq_chip = { + .irq_ack = expio_ack_irq, + .irq_mask = expio_mask_irq, + .irq_unmask = expio_unmask_irq, +}; + +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x"), +}; + +int __init mxc_expio_init(u32 base, u32 intr_gpio) +{ + u32 p_irq = gpio_to_irq(intr_gpio); + int irq_base; + int i; + + brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K); + if (brd_io == NULL) + return -ENOMEM; + + if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || + (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || + (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { + pr_info("3-Stack Debug board not detected\n"); + iounmap(brd_io); + brd_io = NULL; + return -ENODEV; + } + + pr_info("3-Stack Debug board detected, rev = 0x%04X\n", + readw(brd_io + CPLD_CODE_VER_REG)); + + /* + * Configure INT line as GPIO input + */ + gpio_request(intr_gpio, "expio_pirq"); + gpio_direction_input(intr_gpio); + + /* disable the interrupt and clear the status */ + __raw_writew(0, brd_io + INTR_MASK_REG); + __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); + __raw_writew(0, brd_io + INTR_RESET_REG); + __raw_writew(0x1F, brd_io + INTR_MASK_REG); + + irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); + WARN_ON(irq_base < 0); + + domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { + irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW); + irq_set_chained_handler(p_irq, mxc_expio_irq_handler); + + /* Register Lan device on the debugboard */ + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); + smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1; + smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET); + smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET); + platform_device_register(&smsc_lan9217_device); + + return 0; +} diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index dffa273b124..05ded3748d7 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,3 +1,54 @@ +if ARCH_MXC + +config MXC_IRQ_PRIOR + bool "Use IRQ priority" + help + Select this if you want to use prioritized IRQ handling. + This feature prevents higher priority ISR to be interrupted + by lower priority IRQ even IRQF_DISABLED flag is not set. + This may be useful in embedded applications, where are strong + requirements for timing. + Say N here, unless you have a specialized requirement. + +config MXC_TZIC + bool + +config MXC_AVIC + bool + +config MXC_DEBUG_BOARD + bool "Enable MXC debug board(for 3-stack)" + help + The debug board is an integral part of the MXC 3-stack(PDK) + platforms, it can be attached or removed from the peripheral + board. On debug board, several debug devices(ethernet, UART, + buttons, LEDs and JTAG) are implemented. Between the MCU and + these devices, a CPLD is added as a bridge which performs + data/address de-multiplexing and decode, signal level shift, + interrupt control and various board functions. + +config HAVE_EPIT + bool + +config MXC_USE_EPIT + bool "Use EPIT instead of GPT" + depends on HAVE_EPIT + help + Use EPIT as the system timer on systems that have it. Normally you + don't have a reason to do so as the EPIT has the same features and + uses the same clocks as the GPT. Anyway, on some systems the GPT + may be in use for other purposes. + +config MXC_ULPI + bool + +config ARCH_HAS_RNGA + bool + +config IRAM_ALLOC + bool + select GENERIC_ALLOCATOR + config HAVE_IMX_GPC bool @@ -110,6 +161,20 @@ config SOC_IMX51 select PINCTRL_IMX51 select SOC_IMX5 +menu "Freescale MXC Implementations" + +choice + prompt "Freescale CPU family:" + default ARCH_IMX_V6_V7 + +config ARCH_IMX_V4_V5 + bool "i.MX1, i.MX21, i.MX25, i.MX27" + select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR if !ZBOOT_ROM + help + This enables support for systems based on the Freescale i.MX ARMv4 + and ARMv5 SoCs + if ARCH_IMX_V4_V5 comment "MX1 platforms:" @@ -390,6 +455,15 @@ config MACH_IMX27_DT endif +config ARCH_IMX_V6_V7 + bool "i.MX3, i.MX5, i.MX6" + select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR if !ZBOOT_ROM + select MIGHT_HAVE_CACHE_L2X0 + help + This enables support for systems based on the Freescale i.MX3, i.MX5 + and i.MX6 family. + if ARCH_IMX_V6_V7 comment "MX31 platforms:" @@ -773,4 +847,10 @@ config SOC_IMX6Q endif +endchoice + +endmenu + source "arch/arm/mach-imx/devices/Kconfig" + +endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 257893e6db9..fe47b71469c 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,3 +1,5 @@ +obj-y := time.o cpu.o system.o irq-common.o + obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o @@ -18,6 +20,21 @@ obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o +obj-$(CONFIG_MXC_TZIC) += tzic.o +obj-$(CONFIG_MXC_AVIC) += avic.o + +obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o +obj-$(CONFIG_MXC_ULPI) += ulpi.o +obj-$(CONFIG_MXC_USE_EPIT) += epit.o +obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o +obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o + +ifdef CONFIG_SND_IMX_SOC +obj-y += ssi-fiq.o +obj-y += ssi-fiq-ksym.o +endif + # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c new file mode 100644 index 00000000000..cbd55c36def --- /dev/null +++ b/arch/arm/mach-imx/avic.c @@ -0,0 +1,225 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <linux/of.h> +#include <mach/common.h> +#include <asm/mach/irq.h> +#include <asm/exception.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + +#include "irq-common.h" + +#define AVIC_INTCNTL 0x00 /* int control reg */ +#define AVIC_NIMASK 0x04 /* int mask reg */ +#define AVIC_INTENNUM 0x08 /* int enable number reg */ +#define AVIC_INTDISNUM 0x0C /* int disable number reg */ +#define AVIC_INTENABLEH 0x10 /* int enable reg high */ +#define AVIC_INTENABLEL 0x14 /* int enable reg low */ +#define AVIC_INTTYPEH 0x18 /* int type reg high */ +#define AVIC_INTTYPEL 0x1C /* int type reg low */ +#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */ +#define AVIC_NIVECSR 0x40 /* norm int vector/status */ +#define AVIC_FIVECSR 0x44 /* fast int vector/status */ +#define AVIC_INTSRCH 0x48 /* int source reg high */ +#define AVIC_INTSRCL 0x4C /* int source reg low */ +#define AVIC_INTFRCH 0x50 /* int force reg high */ +#define AVIC_INTFRCL 0x54 /* int force reg low */ +#define AVIC_NIPNDH 0x58 /* norm int pending high */ +#define AVIC_NIPNDL 0x5C /* norm int pending low */ +#define AVIC_FIPNDH 0x60 /* fast int pending high */ +#define AVIC_FIPNDL 0x64 /* fast int pending low */ + +#define AVIC_NUM_IRQS 64 + +void __iomem *avic_base; +static struct irq_domain *domain; + +static u32 avic_saved_mask_reg[2]; + +#ifdef CONFIG_MXC_IRQ_PRIOR +static int avic_irq_set_priority(unsigned char irq, unsigned char prio) +{ + struct irq_data *d = irq_get_irq_data(irq); + unsigned int temp; + unsigned int mask = 0x0F << irq % 8 * 4; + + irq = d->hwirq; + + if (irq >= AVIC_NUM_IRQS) + return -EINVAL; + + temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8)); + temp &= ~mask; + temp |= prio & mask; + + __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8)); + + return 0; +} +#endif + +#ifdef CONFIG_FIQ +static int avic_set_irq_fiq(unsigned int irq, unsigned int type) +{ + struct irq_data *d = irq_get_irq_data(irq); + unsigned int irqt; + + irq = d->hwirq; + + if (irq >= AVIC_NUM_IRQS) + return -EINVAL; + + if (irq < AVIC_NUM_IRQS / 2) { + irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); + __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); + } else { + irq -= AVIC_NUM_IRQS / 2; + irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); + __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); + } + + return 0; +} +#endif /* CONFIG_FIQ */ + + +static struct mxc_extra_irq avic_extra_irq = { +#ifdef CONFIG_MXC_IRQ_PRIOR + .set_priority = avic_irq_set_priority, +#endif +#ifdef CONFIG_FIQ + .set_irq_fiq = avic_set_irq_fiq, +#endif +}; + +#ifdef CONFIG_PM +static void avic_irq_suspend(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = gc->chip_types; + int idx = d->hwirq >> 5; + + avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask); + __raw_writel(gc->wake_active, avic_base + ct->regs.mask); +} + +static void avic_irq_resume(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = gc->chip_types; + int idx = d->hwirq >> 5; + + __raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); +} + +#else +#define avic_irq_suspend NULL +#define avic_irq_resume NULL +#endif + +static __init void avic_init_gc(int idx, unsigned int irq_start) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base, + handle_level_irq); + gc->private = &avic_extra_irq; + gc->wake_enabled = IRQ_MSK(32); + + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_ack = irq_gc_mask_clr_bit; + ct->chip.irq_set_wake = irq_gc_set_wake; + ct->chip.irq_suspend = avic_irq_suspend; + ct->chip.irq_resume = avic_irq_resume; + ct->regs.mask = !idx ? AVIC_INTENABLEL : AVIC_INTENABLEH; + ct->regs.ack = ct->regs.mask; + + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); +} + +asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) +{ + u32 nivector; + + do { + nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16; + if (nivector == 0xffff) + break; + + handle_IRQ(irq_find_mapping(domain, nivector), regs); + } while (1); +} + +/* + * This function initializes the AVIC hardware and disables all the + * interrupts. It registers the interrupt enable and disable functions + * to the kernel for each interrupt source. + */ +void __init mxc_init_irq(void __iomem *irqbase) +{ + struct device_node *np; + int irq_base; + int i; + + avic_base = irqbase; + + /* put the AVIC into the reset value with + * all interrupts disabled + */ + __raw_writel(0, avic_base + AVIC_INTCNTL); + __raw_writel(0x1f, avic_base + AVIC_NIMASK); + + /* disable all interrupts */ + __raw_writel(0, avic_base + AVIC_INTENABLEH); + __raw_writel(0, avic_base + AVIC_INTENABLEL); + + /* all IRQ no FIQ */ + __raw_writel(0, avic_base + AVIC_INTTYPEH); + __raw_writel(0, avic_base + AVIC_INTTYPEL); + + irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id()); + WARN_ON(irq_base < 0); + + np = of_find_compatible_node(NULL, NULL, "fsl,avic"); + domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32) + avic_init_gc(i, irq_base); + + /* Set default priority value (0) for all IRQ's */ + for (i = 0; i < 8; i++) + __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); + +#ifdef CONFIG_FIQ + /* Initialize FIQ */ + init_FIQ(FIQ_START); +#endif + + printk(KERN_INFO "MXC IRQ initialized\n"); +} diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c new file mode 100644 index 00000000000..220dd6f9312 --- /dev/null +++ b/arch/arm/mach-imx/cpu.c @@ -0,0 +1,44 @@ + +#include <linux/module.h> +#include <linux/io.h> +#include <mach/hardware.h> + +unsigned int __mxc_cpu_type; +EXPORT_SYMBOL(__mxc_cpu_type); + +void mxc_set_cpu_type(unsigned int type) +{ + __mxc_cpu_type = type; +} + +void imx_print_silicon_rev(const char *cpu, int srev) +{ + if (srev == IMX_CHIP_REVISION_UNKNOWN) + pr_info("CPU identified as %s, unknown revision\n", cpu); + else + pr_info("CPU identified as %s, silicon rev %d.%d\n", + cpu, (srev >> 4) & 0xf, srev & 0xf); +} + +void __init imx_set_aips(void __iomem *base) +{ + unsigned int reg; +/* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + __raw_writel(0x77777777, base + 0x0); + __raw_writel(0x77777777, base + 0x4); + +/* + * Set all OPACRx to be non-bufferable, to not require + * supervisor privilege level for access, allow for + * write access and untrusted master access. + */ + __raw_writel(0x0, base + 0x40); + __raw_writel(0x0, base + 0x44); + __raw_writel(0x0, base + 0x48); + __raw_writel(0x0, base + 0x4C); + reg = __raw_readl(base + 0x50) & 0x00FFFFFF; + __raw_writel(reg, base + 0x50); +} diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c new file mode 100644 index 00000000000..b5b6f808313 --- /dev/null +++ b/arch/arm/mach-imx/cpufreq.c @@ -0,0 +1,205 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * A driver for the Freescale Semiconductor i.MXC CPUfreq module. + * The CPUFREQ driver is for controlling CPU frequency. It allows you to change + * the CPU clock speed on the fly. + */ + +#include <linux/module.h> +#include <linux/cpufreq.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <mach/hardware.h> + +#define CLK32_FREQ 32768 +#define NANOSECOND (1000 * 1000 * 1000) + +struct cpu_op *(*get_cpu_op)(int *op); + +static int cpu_freq_khz_min; +static int cpu_freq_khz_max; + +static struct clk *cpu_clk; +static struct cpufreq_frequency_table *imx_freq_table; + +static int cpu_op_nr; +static struct cpu_op *cpu_op_tbl; + +static int set_cpu_freq(int freq) +{ + int ret = 0; + int org_cpu_rate; + + org_cpu_rate = clk_get_rate(cpu_clk); + if (org_cpu_rate == freq) + return ret; + + ret = clk_set_rate(cpu_clk, freq); + if (ret != 0) { + printk(KERN_DEBUG "cannot set CPU clock rate\n"); + return ret; + } + + return ret; +} + +static int mxc_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + return cpufreq_frequency_table_verify(policy, imx_freq_table); +} + +static unsigned int mxc_get_speed(unsigned int cpu) +{ + if (cpu) + return 0; + + return clk_get_rate(cpu_clk) / 1000; +} + +static int mxc_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + struct cpufreq_freqs freqs; + int freq_Hz; + int ret = 0; + unsigned int index; + + cpufreq_frequency_table_target(policy, imx_freq_table, + target_freq, relation, &index); + freq_Hz = imx_freq_table[index].frequency * 1000; + + freqs.old = clk_get_rate(cpu_clk) / 1000; + freqs.new = freq_Hz / 1000; + freqs.cpu = 0; + freqs.flags = 0; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + ret = set_cpu_freq(freq_Hz); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return ret; +} + +static int mxc_cpufreq_init(struct cpufreq_policy *policy) +{ + int ret; + int i; + + printk(KERN_INFO "i.MXC CPU frequency driver\n"); + + if (policy->cpu != 0) + return -EINVAL; + + if (!get_cpu_op) + return -EINVAL; + + cpu_clk = clk_get(NULL, "cpu_clk"); + if (IS_ERR(cpu_clk)) { + printk(KERN_ERR "%s: failed to get cpu clock\n", __func__); + return PTR_ERR(cpu_clk); + } + + cpu_op_tbl = get_cpu_op(&cpu_op_nr); + + cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000; + cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000; + + imx_freq_table = kmalloc( + sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1), + GFP_KERNEL); + if (!imx_freq_table) { + ret = -ENOMEM; + goto err1; + } + + for (i = 0; i < cpu_op_nr; i++) { + imx_freq_table[i].index = i; + imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000; + + if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min) + cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000; + + if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max) + cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000; + } + + imx_freq_table[i].index = i; + imx_freq_table[i].frequency = CPUFREQ_TABLE_END; + + policy->cur = clk_get_rate(cpu_clk) / 1000; + policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min; + policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max; + + /* Manual states, that PLL stabilizes in two CLK32 periods */ + policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ; + + ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table); + + if (ret < 0) { + printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n", + __func__, ret); + goto err; + } + + cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu); + return 0; +err: + kfree(imx_freq_table); +err1: + clk_put(cpu_clk); + return ret; +} + +static int mxc_cpufreq_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + + set_cpu_freq(cpu_freq_khz_max * 1000); + clk_put(cpu_clk); + kfree(imx_freq_table); + return 0; +} + +static struct cpufreq_driver mxc_driver = { + .flags = CPUFREQ_STICKY, + .verify = mxc_verify_speed, + .target = mxc_set_target, + .get = mxc_get_speed, + .init = mxc_cpufreq_init, + .exit = mxc_cpufreq_exit, + .name = "imx", +}; + +static int __devinit mxc_cpufreq_driver_init(void) +{ + return cpufreq_register_driver(&mxc_driver); +} + +static void mxc_cpufreq_driver_exit(void) +{ + cpufreq_unregister_driver(&mxc_driver); +} + +module_init(mxc_cpufreq_driver_init); +module_exit(mxc_cpufreq_driver_exit); + +MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>"); +MODULE_DESCRIPTION("CPUfreq driver for i.MX"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-imx/cpuidle.c b/arch/arm/mach-imx/cpuidle.c new file mode 100644 index 00000000000..d4cb511a44a --- /dev/null +++ b/arch/arm/mach-imx/cpuidle.c @@ -0,0 +1,80 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/cpuidle.h> +#include <linux/err.h> +#include <linux/hrtimer.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/slab.h> + +static struct cpuidle_device __percpu * imx_cpuidle_devices; + +static void __init imx_cpuidle_devices_uninit(void) +{ + int cpu_id; + struct cpuidle_device *dev; + + for_each_possible_cpu(cpu_id) { + dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id); + cpuidle_unregister_device(dev); + } + + free_percpu(imx_cpuidle_devices); +} + +int __init imx_cpuidle_init(struct cpuidle_driver *drv) +{ + struct cpuidle_device *dev; + int cpu_id, ret; + + if (drv->state_count > CPUIDLE_STATE_MAX) { + pr_err("%s: state_count exceeds maximum\n", __func__); + return -EINVAL; + } + + ret = cpuidle_register_driver(drv); + if (ret) { + pr_err("%s: Failed to register cpuidle driver with error: %d\n", + __func__, ret); + return ret; + } + + imx_cpuidle_devices = alloc_percpu(struct cpuidle_device); + if (imx_cpuidle_devices == NULL) { + ret = -ENOMEM; + goto unregister_drv; + } + + /* initialize state data for each cpuidle_device */ + for_each_possible_cpu(cpu_id) { + dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id); + dev->cpu = cpu_id; + dev->state_count = drv->state_count; + + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("%s: Failed to register cpu %u, error: %d\n", + __func__, cpu_id, ret); + goto uninit; + } + } + + return 0; + +uninit: + imx_cpuidle_devices_uninit(); + +unregister_drv: + cpuidle_unregister_driver(drv); + return ret; +} diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c new file mode 100644 index 00000000000..88726f4dbbf --- /dev/null +++ b/arch/arm/mach-imx/epit.c @@ -0,0 +1,234 @@ +/* + * linux/arch/arm/plat-mxc/epit.c + * + * Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#define EPITCR 0x00 +#define EPITSR 0x04 +#define EPITLR 0x08 +#define EPITCMPR 0x0c +#define EPITCNR 0x10 + +#define EPITCR_EN (1 << 0) +#define EPITCR_ENMOD (1 << 1) +#define EPITCR_OCIEN (1 << 2) +#define EPITCR_RLD (1 << 3) +#define EPITCR_PRESC(x) (((x) & 0xfff) << 4) +#define EPITCR_SWR (1 << 16) +#define EPITCR_IOVW (1 << 17) +#define EPITCR_DBGEN (1 << 18) +#define EPITCR_WAITEN (1 << 19) +#define EPITCR_RES (1 << 20) +#define EPITCR_STOPEN (1 << 21) +#define EPITCR_OM_DISCON (0 << 22) +#define EPITCR_OM_TOGGLE (1 << 22) +#define EPITCR_OM_CLEAR (2 << 22) +#define EPITCR_OM_SET (3 << 22) +#define EPITCR_CLKSRC_OFF (0 << 24) +#define EPITCR_CLKSRC_PERIPHERAL (1 << 24) +#define EPITCR_CLKSRC_REF_HIGH (1 << 24) +#define EPITCR_CLKSRC_REF_LOW (3 << 24) + +#define EPITSR_OCIF (1 << 0) + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <mach/hardware.h> +#include <asm/mach/time.h> +#include <mach/common.h> + +static struct clock_event_device clockevent_epit; +static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +static void __iomem *timer_base; + +static inline void epit_irq_disable(void) +{ + u32 val; + + val = __raw_readl(timer_base + EPITCR); + val &= ~EPITCR_OCIEN; + __raw_writel(val, timer_base + EPITCR); +} + +static inline void epit_irq_enable(void) +{ + u32 val; + + val = __raw_readl(timer_base + EPITCR); + val |= EPITCR_OCIEN; + __raw_writel(val, timer_base + EPITCR); +} + +static void epit_irq_acknowledge(void) +{ + __raw_writel(EPITSR_OCIF, timer_base + EPITSR); +} + +static int __init epit_clocksource_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32, + clocksource_mmio_readl_down); +} + +/* clock event */ + +static int epit_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(timer_base + EPITCNR); + + __raw_writel(tcmp - evt, timer_base + EPITCMPR); + + return 0; +} + +static void epit_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + /* + * The timer interrupt generation is disabled at least + * for enough time to call epit_set_next_event() + */ + local_irq_save(flags); + + /* Disable interrupt in GPT module */ + epit_irq_disable(); + + if (mode != clockevent_mode) { + /* Set event time into far-far future */ + + /* Clear pending interrupt */ + epit_irq_acknowledge(); + } + + /* Remember timer mode */ + clockevent_mode = mode; + local_irq_restore(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + printk(KERN_ERR "epit_set_mode: Periodic mode is not " + "supported for i.MX EPIT\n"); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* + * Do not put overhead of interrupt enable/disable into + * epit_set_next_event(), the core has about 4 minutes + * to call epit_set_next_event() or shutdown clock after + * mode switching + */ + local_irq_save(flags); + epit_irq_enable(); + local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t epit_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_epit; + + epit_irq_acknowledge(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction epit_timer_irq = { + .name = "i.MX EPIT Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = epit_timer_interrupt, +}; + +static struct clock_event_device clockevent_epit = { + .name = "epit", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = epit_set_mode, + .set_next_event = epit_set_next_event, + .rating = 200, +}; + +static int __init epit_clockevent_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + clockevent_epit.mult = div_sc(c, NSEC_PER_SEC, + clockevent_epit.shift); + clockevent_epit.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_epit); + clockevent_epit.min_delta_ns = + clockevent_delta2ns(0x800, &clockevent_epit); + + clockevent_epit.cpumask = cpumask_of(0); + + clockevents_register_device(&clockevent_epit); + + return 0; +} + +void __init epit_timer_init(void __iomem *base, int irq) +{ + struct clk *timer_clk; + + timer_clk = clk_get_sys("imx-epit.0", NULL); + if (IS_ERR(timer_clk)) { + pr_err("i.MX epit: unable to get clk\n"); + return; + } + + clk_prepare_enable(timer_clk); + + timer_base = base; + + /* + * Initialise to a known state (all timers off, and timing reset) + */ + __raw_writel(0x0, timer_base + EPITCR); + + __raw_writel(0xffffffff, timer_base + EPITLR); + __raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, + timer_base + EPITCR); + + /* init and register the timer to the framework */ + epit_clocksource_init(timer_clk); + epit_clockevent_init(timer_clk); + + /* Make irqs happen */ + setup_irq(irq, &epit_timer_irq); +} diff --git a/arch/arm/mach-imx/include/mach/common.h b/arch/arm/mach-imx/include/mach/common.h new file mode 100644 index 00000000000..ead901814c0 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/common.h @@ -0,0 +1,162 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_COMMON_H__ +#define __ASM_ARCH_MXC_COMMON_H__ + +struct platform_device; +struct clk; +enum mxc_cpu_pwr_mode; + +extern void mx1_map_io(void); +extern void mx21_map_io(void); +extern void mx25_map_io(void); +extern void mx27_map_io(void); +extern void mx31_map_io(void); +extern void mx35_map_io(void); +extern void mx50_map_io(void); +extern void mx51_map_io(void); +extern void mx53_map_io(void); +extern void imx1_init_early(void); +extern void imx21_init_early(void); +extern void imx25_init_early(void); +extern void imx27_init_early(void); +extern void imx31_init_early(void); +extern void imx35_init_early(void); +extern void imx50_init_early(void); +extern void imx51_init_early(void); +extern void imx53_init_early(void); +extern void mxc_init_irq(void __iomem *); +extern void tzic_init_irq(void __iomem *); +extern void mx1_init_irq(void); +extern void mx21_init_irq(void); +extern void mx25_init_irq(void); +extern void mx27_init_irq(void); +extern void mx31_init_irq(void); +extern void mx35_init_irq(void); +extern void mx50_init_irq(void); +extern void mx51_init_irq(void); +extern void mx53_init_irq(void); +extern void imx1_soc_init(void); +extern void imx21_soc_init(void); +extern void imx25_soc_init(void); +extern void imx27_soc_init(void); +extern void imx31_soc_init(void); +extern void imx35_soc_init(void); +extern void imx50_soc_init(void); +extern void imx51_soc_init(void); +extern void imx51_init_late(void); +extern void imx53_init_late(void); +extern void epit_timer_init(void __iomem *base, int irq); +extern void mxc_timer_init(void __iomem *, int); +extern int mx1_clocks_init(unsigned long fref); +extern int mx21_clocks_init(unsigned long lref, unsigned long fref); +extern int mx25_clocks_init(void); +extern int mx27_clocks_init(unsigned long fref); +extern int mx31_clocks_init(unsigned long fref); +extern int mx35_clocks_init(void); +extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, + unsigned long ckih1, unsigned long ckih2); +extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, + unsigned long ckih1, unsigned long ckih2); +extern int mx27_clocks_init_dt(void); +extern int mx31_clocks_init_dt(void); +extern int mx51_clocks_init_dt(void); +extern int mx53_clocks_init_dt(void); +extern int mx6q_clocks_init(void); +extern struct platform_device *mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); +extern void mxc_set_cpu_type(unsigned int type); +extern void mxc_restart(char, const char *); +extern void mxc_arch_reset_init(void __iomem *); +extern int mx53_revision(void); +extern int mx53_display_revision(void); +extern void imx_set_aips(void __iomem *); + +enum mxc_cpu_pwr_mode { + WAIT_CLOCKED, /* wfi only */ + WAIT_UNCLOCKED, /* WAIT */ + WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */ + STOP_POWER_ON, /* just STOP */ + STOP_POWER_OFF, /* STOP + SRPG */ +}; + +enum mx3_cpu_pwr_mode { + MX3_RUN, + MX3_WAIT, + MX3_DOZE, + MX3_SLEEP, +}; + +extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); +extern void imx_print_silicon_rev(const char *cpu, int srev); + +void avic_handle_irq(struct pt_regs *); +void tzic_handle_irq(struct pt_regs *); + +#define imx1_handle_irq avic_handle_irq +#define imx21_handle_irq avic_handle_irq +#define imx25_handle_irq avic_handle_irq +#define imx27_handle_irq avic_handle_irq +#define imx31_handle_irq avic_handle_irq +#define imx35_handle_irq avic_handle_irq +#define imx50_handle_irq tzic_handle_irq +#define imx51_handle_irq tzic_handle_irq +#define imx53_handle_irq tzic_handle_irq +#define imx6q_handle_irq gic_handle_irq + +extern void imx_enable_cpu(int cpu, bool enable); +extern void imx_set_cpu_jump(int cpu, void *jump_addr); +#ifdef CONFIG_DEBUG_LL +extern void imx_lluart_map_io(void); +#else +static inline void imx_lluart_map_io(void) {} +#endif +extern void v7_cpu_resume(void); +extern u32 *pl310_get_save_ptr(void); +#ifdef CONFIG_SMP +extern void v7_secondary_startup(void); +extern void imx_scu_map_io(void); +extern void imx_smp_prepare(void); +#else +static inline void imx_scu_map_io(void) {} +static inline void imx_smp_prepare(void) {} +#endif +extern void imx_enable_cpu(int cpu, bool enable); +extern void imx_set_cpu_jump(int cpu, void *jump_addr); +extern void imx_src_init(void); +extern void imx_src_prepare_restart(void); +extern void imx_gpc_init(void); +extern void imx_gpc_pre_suspend(void); +extern void imx_gpc_post_resume(void); +extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); +extern void imx6q_clock_map_io(void); + +extern void imx_cpu_die(unsigned int cpu); + +#ifdef CONFIG_PM +extern void imx6q_pm_init(void); +extern void imx51_pm_init(void); +extern void imx53_pm_init(void); +#else +static inline void imx6q_pm_init(void) {} +static inline void imx51_pm_init(void) {} +static inline void imx53_pm_init(void) {} +#endif + +#ifdef CONFIG_NEON +extern int mx51_neon_fixup(void); +#else +static inline int mx51_neon_fixup(void) { return 0; } +#endif + +extern struct smp_operations imx_smp_ops; + +#endif diff --git a/arch/arm/mach-imx/include/mach/cpuidle.h b/arch/arm/mach-imx/include/mach/cpuidle.h new file mode 100644 index 00000000000..bc932d1af37 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/cpuidle.h @@ -0,0 +1,22 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/cpuidle.h> + +#ifdef CONFIG_CPU_IDLE +extern int imx_cpuidle_init(struct cpuidle_driver *drv); +#else +static inline int imx_cpuidle_init(struct cpuidle_driver *drv) +{ + return -ENODEV; +} +#endif diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S new file mode 100644 index 00000000000..761e45f9456 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/debug-macro.S @@ -0,0 +1,51 @@ +/* arch/arm/mach-imx/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <mach/hardware.h> + +#ifdef CONFIG_DEBUG_IMX1_UART +#define UART_PADDR MX1_UART1_BASE_ADDR +#elif defined (CONFIG_DEBUG_IMX25_UART) +#define UART_PADDR MX25_UART1_BASE_ADDR +#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART) +#define UART_PADDR MX2x_UART1_BASE_ADDR +#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART) +#define UART_PADDR MX3x_UART1_BASE_ADDR +#elif defined (CONFIG_DEBUG_IMX51_UART) +#define UART_PADDR MX51_UART1_BASE_ADDR +#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) +#define UART_PADDR MX53_UART1_BASE_ADDR +#elif defined (CONFIG_DEBUG_IMX6Q_UART2) +#define UART_PADDR MX6Q_UART2_BASE_ADDR +#elif defined (CONFIG_DEBUG_IMX6Q_UART4) +#define UART_PADDR MX6Q_UART4_BASE_ADDR +#endif + +#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) + + .macro addruart, rp, rv, tmp + ldr \rp, =UART_PADDR @ physical + ldr \rv, =UART_VADDR @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x40] @ TXDATA + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x98] @ SR2 + tst \rd, #1 << 3 @ TXDC + beq 1002b @ wait until transmit done + .endm diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h new file mode 100644 index 00000000000..ebf10654bb4 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/hardware.h @@ -0,0 +1,134 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#define __ASM_ARCH_MXC_HARDWARE_H__ + +#include <asm/sizes.h> + +#define addr_in_module(addr, mod) \ + ((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE) + +#define IMX_IO_P2V_MODULE(addr, module) \ + (((addr) - module ## _BASE_ADDR) < module ## _SIZE ? \ + (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0) + +/* + * This is rather complicated for humans and ugly to verify, but for a machine + * it's OK. Still more as it is usually only applied to constants. The upsides + * on using this approach are: + * + * - same mapping on all i.MX machines + * - works for assembler, too + * - no need to nurture #defines for virtual addresses + * + * The downside it, it's hard to verify (but I have a script for that). + * + * Obviously this needs to be injective for each SoC. In general it maps the + * whole address space to [0xf4000000, 0xf5ffffff]. So [0xf6000000,0xfeffffff] + * is free for per-machine use (e.g. KZM_ARM11_01 uses 64MiB there). + * + * It applies the following mappings for the different SoCs: + * + * mx1: + * IO 0x00200000+0x100000 -> 0xf4000000+0x100000 + * mx21: + * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 + * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000 + * X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000 + * mx25: + * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 + * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 + * mx27: + * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 + * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000 + * X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000 + * mx31: + * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 + * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 + * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * mx35: + * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 + * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 + * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * mx50: + * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 + * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000 + * mx51: + * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 + * IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000 + * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000 + * SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000 + * AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000 + * AIPS2 0x83f00000+0x100000 -> 0xf5300000+0x100000 + * mx53: + * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 + * DEBUG 0x40000000+0x100000 -> 0xf5000000+0x100000 + * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 + * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000 + * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000 + * mx6q: + * SCU 0x00a00000+0x004000 -> 0xf4000000+0x004000 + * CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000 + * ANATOP 0x020c8000+0x004000 -> 0xf42c8000+0x004000 + * UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000 + */ +#define IMX_IO_P2V(x) ( \ + (((x) & 0x80000000) >> 7) | \ + (0xf4000000 + \ + (((x) & 0x50000000) >> 6) + \ + (((x) & 0x0b000000) >> 4) + \ + (((x) & 0x000fffff)))) + +#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x)) + +#include <mach/mxc.h> + +#include <mach/mx6q.h> +#include <mach/mx50.h> +#include <mach/mx51.h> +#include <mach/mx53.h> +#include <mach/mx3x.h> +#include <mach/mx31.h> +#include <mach/mx35.h> +#include <mach/mx2x.h> +#include <mach/mx21.h> +#include <mach/mx27.h> +#include <mach/mx1.h> +#include <mach/mx25.h> + +#define imx_map_entry(soc, name, _type) { \ + .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ + .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ + .length = soc ## _ ## name ## _SIZE, \ + .type = _type, \ +} + +/* There's a off-by-one betweem the gpio bank number and the gpiochip */ +/* range e.g. GPIO_1_5 is gpio 5 under linux */ +#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) + +#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/arch/arm/mach-imx/include/mach/iim.h b/arch/arm/mach-imx/include/mach/iim.h new file mode 100644 index 00000000000..315bffadafd --- /dev/null +++ b/arch/arm/mach-imx/include/mach/iim.h @@ -0,0 +1,77 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_IIM_H__ +#define __ASM_ARCH_MXC_IIM_H__ + +/* Register offsets */ +#define MXC_IIMSTAT 0x0000 +#define MXC_IIMSTATM 0x0004 +#define MXC_IIMERR 0x0008 +#define MXC_IIMEMASK 0x000C +#define MXC_IIMFCTL 0x0010 +#define MXC_IIMUA 0x0014 +#define MXC_IIMLA 0x0018 +#define MXC_IIMSDAT 0x001C +#define MXC_IIMPREV 0x0020 +#define MXC_IIMSREV 0x0024 +#define MXC_IIMPRG_P 0x0028 +#define MXC_IIMSCS0 0x002C +#define MXC_IIMSCS1 0x0030 +#define MXC_IIMSCS2 0x0034 +#define MXC_IIMSCS3 0x0038 +#define MXC_IIMFBAC0 0x0800 +#define MXC_IIMJAC 0x0804 +#define MXC_IIMHWV1 0x0808 +#define MXC_IIMHWV2 0x080C +#define MXC_IIMHAB0 0x0810 +#define MXC_IIMHAB1 0x0814 +/* Definitions for i.MX27 TO2 */ +#define MXC_IIMMAC 0x0814 +#define MXC_IIMPREV_FUSE 0x0818 +#define MXC_IIMSREV_FUSE 0x081C +#define MXC_IIMSJC_CHALL_0 0x0820 +#define MXC_IIMSJC_CHALL_7 0x083C +#define MXC_IIMFB0UC17 0x0840 +#define MXC_IIMFB0UC255 0x0BFC +#define MXC_IIMFBAC1 0x0C00 +/* Definitions for i.MX27 TO2 */ +#define MXC_IIMSUID 0x0C04 +#define MXC_IIMKEY0 0x0C04 +#define MXC_IIMKEY20 0x0C54 +#define MXC_IIMSJC_RESP_0 0x0C58 +#define MXC_IIMSJC_RESP_7 0x0C74 +#define MXC_IIMFB1UC30 0x0C78 +#define MXC_IIMFB1UC255 0x0FFC + +/* Bit definitions */ + +#define MXC_IIMHWV1_WLOCK (0x1 << 7) +#define MXC_IIMHWV1_MCU_ENDIAN (0x1 << 6) +#define MXC_IIMHWV1_DSP_ENDIAN (0x1 << 5) +#define MXC_IIMHWV1_BOOT_INT (0x1 << 4) +#define MXC_IIMHWV1_SCC_DISABLE (0x1 << 3) +#define MXC_IIMHWV1_HANTRO_DISABLE (0x1 << 2) +#define MXC_IIMHWV1_MEMSTICK_DIS (0x1 << 1) + +#define MXC_IIMHWV2_WLOCK (0x1 << 7) +#define MXC_IIMHWV2_BP_SDMA (0x1 << 6) +#define MXC_IIMHWV2_SCM_DCM (0x1 << 5) + +#endif /* __ASM_ARCH_MXC_IIM_H__ */ diff --git a/arch/arm/mach-imx/include/mach/ipu.h b/arch/arm/mach-imx/include/mach/ipu.h new file mode 100644 index 00000000000..539e559d18b --- /dev/null +++ b/arch/arm/mach-imx/include/mach/ipu.h @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _IPU_H_ +#define _IPU_H_ + +#include <linux/types.h> +#include <linux/dmaengine.h> + +/* IPU DMA Controller channel definitions. */ +enum ipu_channel { + IDMAC_IC_0 = 0, /* IC (encoding task) to memory */ + IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */ + IDMAC_ADC_0 = 1, + IDMAC_IC_2 = 2, + IDMAC_ADC_1 = 2, + IDMAC_IC_3 = 3, + IDMAC_IC_4 = 4, + IDMAC_IC_5 = 5, + IDMAC_IC_6 = 6, + IDMAC_IC_7 = 7, /* IC (sensor data) to memory */ + IDMAC_IC_8 = 8, + IDMAC_IC_9 = 9, + IDMAC_IC_10 = 10, + IDMAC_IC_11 = 11, + IDMAC_IC_12 = 12, + IDMAC_IC_13 = 13, + IDMAC_SDC_0 = 14, /* Background synchronous display data */ + IDMAC_SDC_1 = 15, /* Foreground data (overlay) */ + IDMAC_SDC_2 = 16, + IDMAC_SDC_3 = 17, + IDMAC_ADC_2 = 18, + IDMAC_ADC_3 = 19, + IDMAC_ADC_4 = 20, + IDMAC_ADC_5 = 21, + IDMAC_ADC_6 = 22, + IDMAC_ADC_7 = 23, + IDMAC_PF_0 = 24, + IDMAC_PF_1 = 25, + IDMAC_PF_2 = 26, + IDMAC_PF_3 = 27, + IDMAC_PF_4 = 28, + IDMAC_PF_5 = 29, + IDMAC_PF_6 = 30, + IDMAC_PF_7 = 31, +}; + +/* Order significant! */ +enum ipu_channel_status { + IPU_CHANNEL_FREE, + IPU_CHANNEL_INITIALIZED, + IPU_CHANNEL_READY, + IPU_CHANNEL_ENABLED, +}; + +#define IPU_CHANNELS_NUM 32 + +enum pixel_fmt { + /* 1 byte */ + IPU_PIX_FMT_GENERIC, + IPU_PIX_FMT_RGB332, + IPU_PIX_FMT_YUV420P, + IPU_PIX_FMT_YUV422P, + IPU_PIX_FMT_YUV420P2, + IPU_PIX_FMT_YVU422P, + /* 2 bytes */ + IPU_PIX_FMT_RGB565, + IPU_PIX_FMT_RGB666, + IPU_PIX_FMT_BGR666, + IPU_PIX_FMT_YUYV, + IPU_PIX_FMT_UYVY, + /* 3 bytes */ + IPU_PIX_FMT_RGB24, + IPU_PIX_FMT_BGR24, + /* 4 bytes */ + IPU_PIX_FMT_GENERIC_32, + IPU_PIX_FMT_RGB32, + IPU_PIX_FMT_BGR32, + IPU_PIX_FMT_ABGR32, + IPU_PIX_FMT_BGRA32, + IPU_PIX_FMT_RGBA32, +}; + +enum ipu_color_space { + IPU_COLORSPACE_RGB, + IPU_COLORSPACE_YCBCR, + IPU_COLORSPACE_YUV +}; + +/* + * Enumeration of IPU rotation modes + */ +enum ipu_rotate_mode { + /* Note the enum values correspond to BAM value */ + IPU_ROTATE_NONE = 0, + IPU_ROTATE_VERT_FLIP = 1, + IPU_ROTATE_HORIZ_FLIP = 2, + IPU_ROTATE_180 = 3, + IPU_ROTATE_90_RIGHT = 4, + IPU_ROTATE_90_RIGHT_VFLIP = 5, + IPU_ROTATE_90_RIGHT_HFLIP = 6, + IPU_ROTATE_90_LEFT = 7, +}; + +/* + * Enumeration of DI ports for ADC. + */ +enum display_port { + DISP0, + DISP1, + DISP2, + DISP3 +}; + +struct idmac_video_param { + unsigned short in_width; + unsigned short in_height; + uint32_t in_pixel_fmt; + unsigned short out_width; + unsigned short out_height; + uint32_t out_pixel_fmt; + unsigned short out_stride; + bool graphics_combine_en; + bool global_alpha_en; + bool key_color_en; + enum display_port disp; + unsigned short out_left; + unsigned short out_top; +}; + +/* + * Union of initialization parameters for a logical channel. So far only video + * parameters are used. + */ +union ipu_channel_param { + struct idmac_video_param video; +}; + +struct idmac_tx_desc { + struct dma_async_tx_descriptor txd; + struct scatterlist *sg; /* scatterlist for this */ + unsigned int sg_len; /* tx-descriptor. */ + struct list_head list; +}; + +struct idmac_channel { + struct dma_chan dma_chan; + dma_cookie_t completed; /* last completed cookie */ + union ipu_channel_param params; + enum ipu_channel link; /* input channel, linked to the output */ + enum ipu_channel_status status; + void *client; /* Only one client per channel */ + unsigned int n_tx_desc; + struct idmac_tx_desc *desc; /* allocated tx-descriptors */ + struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */ + struct list_head free_list; /* free tx-descriptors */ + struct list_head queue; /* queued tx-descriptors */ + spinlock_t lock; /* protects sg[0,1], queue */ + struct mutex chan_mutex; /* protects status, cookie, free_list */ + bool sec_chan_en; + int active_buffer; + unsigned int eof_irq; + char eof_name[16]; /* EOF IRQ name for request_irq() */ +}; + +#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd) +#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan) + +#endif diff --git a/arch/arm/mach-imx/include/mach/iram.h b/arch/arm/mach-imx/include/mach/iram.h new file mode 100644 index 00000000000..022690c3370 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/iram.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include <linux/errno.h> + +#ifdef CONFIG_IRAM_ALLOC + +int __init iram_init(unsigned long base, unsigned long size); +void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr); +void iram_free(unsigned long dma_addr, unsigned int size); + +#else + +static inline int __init iram_init(unsigned long base, unsigned long size) +{ + return -ENOMEM; +} + +static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) +{ + return NULL; +} + +static inline void iram_free(unsigned long base, unsigned long size) {} + +#endif diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h new file mode 100644 index 00000000000..d73f5e8ea9c --- /dev/null +++ b/arch/arm/mach-imx/include/mach/irqs.h @@ -0,0 +1,21 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_IRQS_H__ +#define __ASM_ARCH_MXC_IRQS_H__ + +extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); + +/* all normal IRQs can be FIQs */ +#define FIQ_START 0 +/* switch between IRQ and FIQ */ +extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); + +#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx1.h b/arch/arm/mach-imx/include/mach/mx1.h new file mode 100644 index 00000000000..45bd31cc34d --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx1.h @@ -0,0 +1,172 @@ +/* + * Copyright (C) 1997,1998 Russell King + * Copyright (C) 1999 ARM Limited + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MX1_H__ +#define __MACH_MX1_H__ + +/* + * Memory map + */ +#define MX1_IO_BASE_ADDR 0x00200000 +#define MX1_IO_SIZE SZ_1M + +#define MX1_CS0_PHYS 0x10000000 +#define MX1_CS0_SIZE 0x02000000 + +#define MX1_CS1_PHYS 0x12000000 +#define MX1_CS1_SIZE 0x01000000 + +#define MX1_CS2_PHYS 0x13000000 +#define MX1_CS2_SIZE 0x01000000 + +#define MX1_CS3_PHYS 0x14000000 +#define MX1_CS3_SIZE 0x01000000 + +#define MX1_CS4_PHYS 0x15000000 +#define MX1_CS4_SIZE 0x01000000 + +#define MX1_CS5_PHYS 0x16000000 +#define MX1_CS5_SIZE 0x01000000 + +/* + * Register BASEs, based on OFFSETs + */ +#define MX1_AIPI1_BASE_ADDR (0x00000 + MX1_IO_BASE_ADDR) +#define MX1_WDT_BASE_ADDR (0x01000 + MX1_IO_BASE_ADDR) +#define MX1_TIM1_BASE_ADDR (0x02000 + MX1_IO_BASE_ADDR) +#define MX1_TIM2_BASE_ADDR (0x03000 + MX1_IO_BASE_ADDR) +#define MX1_RTC_BASE_ADDR (0x04000 + MX1_IO_BASE_ADDR) +#define MX1_LCDC_BASE_ADDR (0x05000 + MX1_IO_BASE_ADDR) +#define MX1_UART1_BASE_ADDR (0x06000 + MX1_IO_BASE_ADDR) +#define MX1_UART2_BASE_ADDR (0x07000 + MX1_IO_BASE_ADDR) +#define MX1_PWM_BASE_ADDR (0x08000 + MX1_IO_BASE_ADDR) +#define MX1_DMA_BASE_ADDR (0x09000 + MX1_IO_BASE_ADDR) +#define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR) +#define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR) +#define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR) +#define MX1_CSPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR) +#define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR) +#define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR) +#define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR) +#define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR) +#define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR) +#define MX1_CSPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR) +#define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR) +#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR) +#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR) +#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) +#define MX1_GPIO1_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) +#define MX1_GPIO2_BASE_ADDR (0x1C100 + MX1_IO_BASE_ADDR) +#define MX1_GPIO3_BASE_ADDR (0x1C200 + MX1_IO_BASE_ADDR) +#define MX1_GPIO4_BASE_ADDR (0x1C300 + MX1_IO_BASE_ADDR) +#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR) +#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR) +#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR) +#define MX1_AVIC_BASE_ADDR (0x23000 + MX1_IO_BASE_ADDR) +#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR) + +/* macro to get at IO space when running virtually */ +#define MX1_IO_P2V(x) IMX_IO_P2V(x) +#define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x)) + +/* fixed interrput numbers */ +#include <asm/irq.h> +#define MX1_INT_SOFTINT (NR_IRQS_LEGACY + 0) +#define MX1_INT_CSI (NR_IRQS_LEGACY + 6) +#define MX1_DSPA_MAC_INT (NR_IRQS_LEGACY + 7) +#define MX1_DSPA_INT (NR_IRQS_LEGACY + 8) +#define MX1_COMP_INT (NR_IRQS_LEGACY + 9) +#define MX1_MSHC_XINT (NR_IRQS_LEGACY + 10) +#define MX1_GPIO_INT_PORTA (NR_IRQS_LEGACY + 11) +#define MX1_GPIO_INT_PORTB (NR_IRQS_LEGACY + 12) +#define MX1_GPIO_INT_PORTC (NR_IRQS_LEGACY + 13) +#define MX1_INT_LCDC (NR_IRQS_LEGACY + 14) +#define MX1_SIM_INT (NR_IRQS_LEGACY + 15) +#define MX1_SIM_DATA_INT (NR_IRQS_LEGACY + 16) +#define MX1_RTC_INT (NR_IRQS_LEGACY + 17) +#define MX1_RTC_SAMINT (NR_IRQS_LEGACY + 18) +#define MX1_INT_UART2PFERR (NR_IRQS_LEGACY + 19) +#define MX1_INT_UART2RTS (NR_IRQS_LEGACY + 20) +#define MX1_INT_UART2DTR (NR_IRQS_LEGACY + 21) +#define MX1_INT_UART2UARTC (NR_IRQS_LEGACY + 22) +#define MX1_INT_UART2TX (NR_IRQS_LEGACY + 23) +#define MX1_INT_UART2RX (NR_IRQS_LEGACY + 24) +#define MX1_INT_UART1PFERR (NR_IRQS_LEGACY + 25) +#define MX1_INT_UART1RTS (NR_IRQS_LEGACY + 26) +#define MX1_INT_UART1DTR (NR_IRQS_LEGACY + 27) +#define MX1_INT_UART1UARTC (NR_IRQS_LEGACY + 28) +#define MX1_INT_UART1TX (NR_IRQS_LEGACY + 29) +#define MX1_INT_UART1RX (NR_IRQS_LEGACY + 30) +#define MX1_VOICE_DAC_INT (NR_IRQS_LEGACY + 31) +#define MX1_VOICE_ADC_INT (NR_IRQS_LEGACY + 32) +#define MX1_PEN_DATA_INT (NR_IRQS_LEGACY + 33) +#define MX1_PWM_INT (NR_IRQS_LEGACY + 34) +#define MX1_SDHC_INT (NR_IRQS_LEGACY + 35) +#define MX1_INT_I2C (NR_IRQS_LEGACY + 39) +#define MX1_INT_CSPI2 (NR_IRQS_LEGACY + 40) +#define MX1_INT_CSPI1 (NR_IRQS_LEGACY + 41) +#define MX1_SSI_TX_INT (NR_IRQS_LEGACY + 42) +#define MX1_SSI_TX_ERR_INT (NR_IRQS_LEGACY + 43) +#define MX1_SSI_RX_INT (NR_IRQS_LEGACY + 44) +#define MX1_SSI_RX_ERR_INT (NR_IRQS_LEGACY + 45) +#define MX1_TOUCH_INT (NR_IRQS_LEGACY + 46) +#define MX1_INT_USBD0 (NR_IRQS_LEGACY + 47) +#define MX1_INT_USBD1 (NR_IRQS_LEGACY + 48) +#define MX1_INT_USBD2 (NR_IRQS_LEGACY + 49) +#define MX1_INT_USBD3 (NR_IRQS_LEGACY + 50) +#define MX1_INT_USBD4 (NR_IRQS_LEGACY + 51) +#define MX1_INT_USBD5 (NR_IRQS_LEGACY + 52) +#define MX1_INT_USBD6 (NR_IRQS_LEGACY + 53) +#define MX1_BTSYS_INT (NR_IRQS_LEGACY + 55) +#define MX1_BTTIM_INT (NR_IRQS_LEGACY + 56) +#define MX1_BTWUI_INT (NR_IRQS_LEGACY + 57) +#define MX1_TIM2_INT (NR_IRQS_LEGACY + 58) +#define MX1_TIM1_INT (NR_IRQS_LEGACY + 59) +#define MX1_DMA_ERR (NR_IRQS_LEGACY + 60) +#define MX1_DMA_INT (NR_IRQS_LEGACY + 61) +#define MX1_GPIO_INT_PORTD (NR_IRQS_LEGACY + 62) +#define MX1_WDT_INT (NR_IRQS_LEGACY + 63) + +/* DMA */ +#define MX1_DMA_REQ_UART3_T 2 +#define MX1_DMA_REQ_UART3_R 3 +#define MX1_DMA_REQ_SSI2_T 4 +#define MX1_DMA_REQ_SSI2_R 5 +#define MX1_DMA_REQ_CSI_STAT 6 +#define MX1_DMA_REQ_CSI_R 7 +#define MX1_DMA_REQ_MSHC 8 +#define MX1_DMA_REQ_DSPA_DCT_DOUT 9 +#define MX1_DMA_REQ_DSPA_DCT_DIN 10 +#define MX1_DMA_REQ_DSPA_MAC 11 +#define MX1_DMA_REQ_EXT 12 +#define MX1_DMA_REQ_SDHC 13 +#define MX1_DMA_REQ_SPI1_R 14 +#define MX1_DMA_REQ_SPI1_T 15 +#define MX1_DMA_REQ_SSI_T 16 +#define MX1_DMA_REQ_SSI_R 17 +#define MX1_DMA_REQ_ASP_DAC 18 +#define MX1_DMA_REQ_ASP_ADC 19 +#define MX1_DMA_REQ_USP_EP(x) (20 + (x)) +#define MX1_DMA_REQ_SPI2_R 26 +#define MX1_DMA_REQ_SPI2_T 27 +#define MX1_DMA_REQ_UART2_T 28 +#define MX1_DMA_REQ_UART2_R 29 +#define MX1_DMA_REQ_UART1_T 30 +#define MX1_DMA_REQ_UART1_R 31 + +/* + * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS + * to not break drivers/usb/gadget/imx_udc. Should go + * away after this driver uses the new name. + */ +#define USBD_INT0 MX1_INT_USBD0 + +#endif /* ifndef __MACH_MX1_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx21.h b/arch/arm/mach-imx/include/mach/mx21.h new file mode 100644 index 00000000000..468738aa997 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx21.h @@ -0,0 +1,189 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de + * + * This contains i.MX21-specific hardware definitions. For those + * hardware pieces that are common between i.MX21 and i.MX27, have a + * look at mx2x.h. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MX21_H__ +#define __MACH_MX21_H__ + +#define MX21_AIPI_BASE_ADDR 0x10000000 +#define MX21_AIPI_SIZE SZ_1M +#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000) +#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000) +#define MX21_GPT1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x03000) +#define MX21_GPT2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x04000) +#define MX21_GPT3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x05000) +#define MX21_PWM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x06000) +#define MX21_RTC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x07000) +#define MX21_KPP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x08000) +#define MX21_OWIRE_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x09000) +#define MX21_UART1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0a000) +#define MX21_UART2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0b000) +#define MX21_UART3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0c000) +#define MX21_UART4_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0d000) +#define MX21_CSPI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0e000) +#define MX21_CSPI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0f000) +#define MX21_SSI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x10000) +#define MX21_SSI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x11000) +#define MX21_I2C_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x12000) +#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000) +#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000) +#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000) +#define MX21_GPIO1_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x000) +#define MX21_GPIO2_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x100) +#define MX21_GPIO3_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x200) +#define MX21_GPIO4_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x300) +#define MX21_GPIO5_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x400) +#define MX21_GPIO6_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x500) +#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000) +#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000) +#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000) +#define MX21_SLCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x22000) +#define MX21_USBOTG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x24000) +#define MX21_EMMA_PP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26000) +#define MX21_EMMA_PRP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26400) +#define MX21_CCM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27000) +#define MX21_SYSCTRL_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27800) +#define MX21_JAM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3e000) +#define MX21_MAX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3f000) + +#define MX21_AVIC_BASE_ADDR 0x10040000 + +#define MX21_SAHB1_BASE_ADDR 0x80000000 +#define MX21_SAHB1_SIZE SZ_1M +#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) + +/* Memory regions and CS */ +#define MX21_SDRAM_BASE_ADDR 0xc0000000 +#define MX21_CSD1_BASE_ADDR 0xc4000000 + +#define MX21_CS0_BASE_ADDR 0xc8000000 +#define MX21_CS1_BASE_ADDR 0xcc000000 +#define MX21_CS2_BASE_ADDR 0xd0000000 +#define MX21_CS3_BASE_ADDR 0xd1000000 +#define MX21_CS4_BASE_ADDR 0xd2000000 +#define MX21_PCMCIA_MEM_BASE_ADDR 0xd4000000 +#define MX21_CS5_BASE_ADDR 0xdd000000 + +/* NAND, SDRAM, WEIM etc controllers */ +#define MX21_X_MEMC_BASE_ADDR 0xdf000000 +#define MX21_X_MEMC_SIZE SZ_256K + +#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000) +#define MX21_EIM_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x1000) +#define MX21_PCMCIA_CTL_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x2000) +#define MX21_NFC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x3000) + +#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */ + +#define MX21_IO_P2V(x) IMX_IO_P2V(x) +#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x)) + +/* fixed interrupt numbers */ +#include <asm/irq.h> +#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9) +#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX21_INT_I2C (NR_IRQS_LEGACY + 12) +#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX21_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX21_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX21_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX21_INT_NFC (NR_IRQS_LEGACY + 29) +#define MX21_INT_BMI (NR_IRQS_LEGACY + 30) +#define MX21_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49) +#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50) +#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53) +#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54) +#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55) +#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56) +#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57) +#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58) +#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61) + +/* fixed DMA request numbers */ +#define MX21_DMA_REQ_CSPI3_RX 1 +#define MX21_DMA_REQ_CSPI3_TX 2 +#define MX21_DMA_REQ_EXT 3 +#define MX21_DMA_REQ_FIRI_RX 4 +#define MX21_DMA_REQ_SDHC2 6 +#define MX21_DMA_REQ_SDHC1 7 +#define MX21_DMA_REQ_SSI2_RX0 8 +#define MX21_DMA_REQ_SSI2_TX0 9 +#define MX21_DMA_REQ_SSI2_RX1 10 +#define MX21_DMA_REQ_SSI2_TX1 11 +#define MX21_DMA_REQ_SSI1_RX0 12 +#define MX21_DMA_REQ_SSI1_TX0 13 +#define MX21_DMA_REQ_SSI1_RX1 14 +#define MX21_DMA_REQ_SSI1_TX1 15 +#define MX21_DMA_REQ_CSPI2_RX 16 +#define MX21_DMA_REQ_CSPI2_TX 17 +#define MX21_DMA_REQ_CSPI1_RX 18 +#define MX21_DMA_REQ_CSPI1_TX 19 +#define MX21_DMA_REQ_UART4_RX 20 +#define MX21_DMA_REQ_UART4_TX 21 +#define MX21_DMA_REQ_UART3_RX 22 +#define MX21_DMA_REQ_UART3_TX 23 +#define MX21_DMA_REQ_UART2_RX 24 +#define MX21_DMA_REQ_UART2_TX 25 +#define MX21_DMA_REQ_UART1_RX 26 +#define MX21_DMA_REQ_UART1_TX 27 +#define MX21_DMA_REQ_BMI_TX 28 +#define MX21_DMA_REQ_BMI_RX 29 +#define MX21_DMA_REQ_CSI_STAT 30 +#define MX21_DMA_REQ_CSI_RX 31 + +#endif /* ifndef __MACH_MX21_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx25.h b/arch/arm/mach-imx/include/mach/mx25.h new file mode 100644 index 00000000000..ec466400a20 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx25.h @@ -0,0 +1,117 @@ +#ifndef __MACH_MX25_H__ +#define __MACH_MX25_H__ + +#define MX25_AIPS1_BASE_ADDR 0x43f00000 +#define MX25_AIPS1_SIZE SZ_1M +#define MX25_AIPS2_BASE_ADDR 0x53f00000 +#define MX25_AIPS2_SIZE SZ_1M +#define MX25_AVIC_BASE_ADDR 0x68000000 +#define MX25_AVIC_SIZE SZ_1M + +#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000) +#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000) +#define MX25_CAN1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x88000) +#define MX25_CAN2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x8c000) +#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000) +#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000) +#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000) + +#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000) +#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000) +#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000) +#define MX25_PWM2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa0000) +#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000) +#define MX25_PWM3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa8000) +#define MX25_PWM4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xc8000) +#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000) +#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000) +#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000) +#define MX25_PWM1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xe0000) + +#define MX25_UART1_BASE_ADDR 0x43f90000 +#define MX25_UART2_BASE_ADDR 0x43f94000 +#define MX25_AUDMUX_BASE_ADDR 0x43fb0000 +#define MX25_UART3_BASE_ADDR 0x5000c000 +#define MX25_UART4_BASE_ADDR 0x50008000 +#define MX25_UART5_BASE_ADDR 0x5002c000 + +#define MX25_CSPI3_BASE_ADDR 0x50004000 +#define MX25_CSPI2_BASE_ADDR 0x50010000 +#define MX25_FEC_BASE_ADDR 0x50038000 +#define MX25_SSI2_BASE_ADDR 0x50014000 +#define MX25_SSI1_BASE_ADDR 0x50034000 +#define MX25_NFC_BASE_ADDR 0xbb000000 +#define MX25_IIM_BASE_ADDR 0x53ff0000 +#define MX25_DRYICE_BASE_ADDR 0x53ffc000 +#define MX25_ESDHC1_BASE_ADDR 0x53fb4000 +#define MX25_ESDHC2_BASE_ADDR 0x53fb8000 +#define MX25_LCDC_BASE_ADDR 0x53fbc000 +#define MX25_KPP_BASE_ADDR 0x43fa8000 +#define MX25_SDMA_BASE_ADDR 0x53fd4000 +#define MX25_USB_BASE_ADDR 0x53ff4000 +#define MX25_USB_OTG_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0000) +/* + * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200 + * for the host controller. Early documentation drafts specified 0x400 and + * Freescale internal sources confirm only the latter value to work. + */ +#define MX25_USB_HS_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0400) +#define MX25_CSI_BASE_ADDR 0x53ff8000 + +#define MX25_IO_P2V(x) IMX_IO_P2V(x) +#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x)) + +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0) +#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3) +#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5) +#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8) +#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9) +#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10) +#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11) +#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12) +#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16) +#define MX25_INT_CSI (NR_IRQS_LEGACY + 17) +#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23) +#define MX25_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25) +#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26) +#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX25_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35) +#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36) +#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39) +#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40) +#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41) +#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42) +#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43) +#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44) +#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54) +#define MX25_INT_FEC (NR_IRQS_LEGACY + 57) + +#define MX25_DMA_REQ_SSI2_RX1 22 +#define MX25_DMA_REQ_SSI2_TX1 23 +#define MX25_DMA_REQ_SSI2_RX0 24 +#define MX25_DMA_REQ_SSI2_TX0 25 +#define MX25_DMA_REQ_SSI1_RX1 26 +#define MX25_DMA_REQ_SSI1_TX1 27 +#define MX25_DMA_REQ_SSI1_RX0 28 +#define MX25_DMA_REQ_SSI1_TX0 29 + +#ifndef __ASSEMBLY__ +extern int mx25_revision(void); +#endif + +#endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx27.h b/arch/arm/mach-imx/include/mach/mx27.h new file mode 100644 index 00000000000..e074616d54c --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx27.h @@ -0,0 +1,238 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This contains i.MX27-specific hardware definitions. For those + * hardware pieces that are common between i.MX21 and i.MX27, have a + * look at mx2x.h. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MX27_H__ +#define __MACH_MX27_H__ + +#define MX27_AIPI_BASE_ADDR 0x10000000 +#define MX27_AIPI_SIZE SZ_1M +#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000) +#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000) +#define MX27_GPT1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x03000) +#define MX27_GPT2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x04000) +#define MX27_GPT3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x05000) +#define MX27_PWM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x06000) +#define MX27_RTC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x07000) +#define MX27_KPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x08000) +#define MX27_OWIRE_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x09000) +#define MX27_UART1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0a000) +#define MX27_UART2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0b000) +#define MX27_UART3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0c000) +#define MX27_UART4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0d000) +#define MX27_CSPI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0e000) +#define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000) +#define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000) +#define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000) +#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000) +#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000) +#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000) +#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000) +#define MX27_GPIO1_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x000) +#define MX27_GPIO2_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x100) +#define MX27_GPIO3_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x200) +#define MX27_GPIO4_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x300) +#define MX27_GPIO5_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x400) +#define MX27_GPIO6_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x500) +#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000) +#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000) +#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000) +#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000) +#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000) +#define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000) +#define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000) +#define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000) +#define MX27_SDHC3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1e000) +#define MX27_GPT6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1f000) +#define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000) +#define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000) +#define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000) +#define MX27_USB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000) +#define MX27_USB_OTG_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0000) +#define MX27_USB_HS1_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0200) +#define MX27_USB_HS2_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0400) +#define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000) +#define MX27_EMMAPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000) +#define MX27_EMMAPRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400) +#define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000) +#define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800) +#define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000) +#define MX27_RTIC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2a000) +#define MX27_FEC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2b000) +#define MX27_SCC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2c000) +#define MX27_ETB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3b000) +#define MX27_ETB_RAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3c000) +#define MX27_JAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3e000) +#define MX27_MAX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3f000) + +#define MX27_AVIC_BASE_ADDR 0x10040000 + +/* ROM patch */ +#define MX27_ROMP_BASE_ADDR 0x10041000 + +#define MX27_SAHB1_BASE_ADDR 0x80000000 +#define MX27_SAHB1_SIZE SZ_1M +#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000) +#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000) + +/* Memory regions and CS */ +#define MX27_SDRAM_BASE_ADDR 0xa0000000 +#define MX27_CSD1_BASE_ADDR 0xb0000000 + +#define MX27_CS0_BASE_ADDR 0xc0000000 +#define MX27_CS1_BASE_ADDR 0xc8000000 +#define MX27_CS2_BASE_ADDR 0xd0000000 +#define MX27_CS3_BASE_ADDR 0xd2000000 +#define MX27_CS4_BASE_ADDR 0xd4000000 +#define MX27_CS5_BASE_ADDR 0xd6000000 + +/* NAND, SDRAM, WEIM, M3IF, EMI controllers */ +#define MX27_X_MEMC_BASE_ADDR 0xd8000000 +#define MX27_X_MEMC_SIZE SZ_1M +#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR) +#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000) +#define MX27_WEIM_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x2000) +#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000) +#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000) + +#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10) +#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs)) +#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) +#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) + +#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000 + +/* IRAM */ +#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */ + +#define MX27_IO_P2V(x) IMX_IO_P2V(x) +#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x)) + +/* fixed interrupt numbers */ +#include <asm/irq.h> +#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1) +#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2) +#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3) +#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4) +#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5) +#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7) +#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9) +#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12) +#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX27_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX27_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX27_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX27_INT_NFC (NR_IRQS_LEGACY + 29) +#define MX27_INT_ATA (NR_IRQS_LEGACY + 30) +#define MX27_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48) +#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49) +#define MX27_INT_FEC (NR_IRQS_LEGACY + 50) +#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX27_INT_VPU (NR_IRQS_LEGACY + 53) +#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54) +#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55) +#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56) +#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57) +#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58) +#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59) +#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61) +#define MX27_INT_IIM (NR_IRQS_LEGACY + 62) +#define MX27_INT_CCM (NR_IRQS_LEGACY + 63) + +/* fixed DMA request numbers */ +#define MX27_DMA_REQ_CSPI3_RX 1 +#define MX27_DMA_REQ_CSPI3_TX 2 +#define MX27_DMA_REQ_EXT 3 +#define MX27_DMA_REQ_MSHC 4 +#define MX27_DMA_REQ_SDHC2 6 +#define MX27_DMA_REQ_SDHC1 7 +#define MX27_DMA_REQ_SSI2_RX0 8 +#define MX27_DMA_REQ_SSI2_TX0 9 +#define MX27_DMA_REQ_SSI2_RX1 10 +#define MX27_DMA_REQ_SSI2_TX1 11 +#define MX27_DMA_REQ_SSI1_RX0 12 +#define MX27_DMA_REQ_SSI1_TX0 13 +#define MX27_DMA_REQ_SSI1_RX1 14 +#define MX27_DMA_REQ_SSI1_TX1 15 +#define MX27_DMA_REQ_CSPI2_RX 16 +#define MX27_DMA_REQ_CSPI2_TX 17 +#define MX27_DMA_REQ_CSPI1_RX 18 +#define MX27_DMA_REQ_CSPI1_TX 19 +#define MX27_DMA_REQ_UART4_RX 20 +#define MX27_DMA_REQ_UART4_TX 21 +#define MX27_DMA_REQ_UART3_RX 22 +#define MX27_DMA_REQ_UART3_TX 23 +#define MX27_DMA_REQ_UART2_RX 24 +#define MX27_DMA_REQ_UART2_TX 25 +#define MX27_DMA_REQ_UART1_RX 26 +#define MX27_DMA_REQ_UART1_TX 27 +#define MX27_DMA_REQ_ATA_TX 28 +#define MX27_DMA_REQ_ATA_RCV 29 +#define MX27_DMA_REQ_CSI_STAT 30 +#define MX27_DMA_REQ_CSI_RX 31 +#define MX27_DMA_REQ_UART5_TX 32 +#define MX27_DMA_REQ_UART5_RX 33 +#define MX27_DMA_REQ_UART6_TX 34 +#define MX27_DMA_REQ_UART6_RX 35 +#define MX27_DMA_REQ_SDHC3 36 +#define MX27_DMA_REQ_NFC 37 + +#ifndef __ASSEMBLY__ +extern int mx27_revision(void); +#endif + +#endif /* ifndef __MACH_MX27_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx2x.h b/arch/arm/mach-imx/include/mach/mx2x.h new file mode 100644 index 00000000000..11642f5b224 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx2x.h @@ -0,0 +1,145 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This contains hardware definitions that are common between i.MX21 and + * i.MX27. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MX2x_H__ +#define __MACH_MX2x_H__ + +/* The following addresses are common between i.MX21 and i.MX27 */ + +/* Register offsets */ +#define MX2x_AIPI_BASE_ADDR 0x10000000 +#define MX2x_AIPI_SIZE SZ_1M +#define MX2x_DMA_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x01000) +#define MX2x_WDOG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x02000) +#define MX2x_GPT1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x03000) +#define MX2x_GPT2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x04000) +#define MX2x_GPT3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x05000) +#define MX2x_PWM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x06000) +#define MX2x_RTC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x07000) +#define MX2x_KPP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x08000) +#define MX2x_OWIRE_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x09000) +#define MX2x_UART1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0a000) +#define MX2x_UART2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0b000) +#define MX2x_UART3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0c000) +#define MX2x_UART4_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0d000) +#define MX2x_CSPI1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0e000) +#define MX2x_CSPI2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0f000) +#define MX2x_SSI1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x10000) +#define MX2x_SSI2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x11000) +#define MX2x_I2C_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x12000) +#define MX2x_SDHC1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x13000) +#define MX2x_SDHC2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x14000) +#define MX2x_GPIO_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x15000) +#define MX2x_AUDMUX_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x16000) +#define MX2x_CSPI3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x17000) +#define MX2x_LCDC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x21000) +#define MX2x_SLCDC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x22000) +#define MX2x_USBOTG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x24000) +#define MX2x_EMMA_PP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x26000) +#define MX2x_EMMA_PRP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x26400) +#define MX2x_CCM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x27000) +#define MX2x_SYSCTRL_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x27800) +#define MX2x_JAM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x3e000) +#define MX2x_MAX_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x3f000) + +#define MX2x_AVIC_BASE_ADDR 0x10040000 + +#define MX2x_SAHB1_BASE_ADDR 0x80000000 +#define MX2x_SAHB1_SIZE SZ_1M +#define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) + +/* fixed interrupt numbers */ +#include <asm/irq.h> +#define MX2x_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX2x_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX2x_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX2x_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX2x_INT_I2C (NR_IRQS_LEGACY + 12) +#define MX2x_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX2x_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX2x_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX2x_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX2x_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX2x_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX2x_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX2x_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX2x_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX2x_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX2x_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX2x_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX2x_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX2x_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX2x_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX2x_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX2x_INT_NANDFC (NR_IRQS_LEGACY + 29) +#define MX2x_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX2x_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX2x_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX2x_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX2x_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX2x_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX2x_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX2x_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX2x_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX2x_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX2x_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX2x_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX2x_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX2x_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX2x_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX2x_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX2x_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX2x_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX2x_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX2x_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX2x_INT_LCDC (NR_IRQS_LEGACY + 61) + +/* fixed DMA request numbers */ +#define MX2x_DMA_REQ_CSPI3_RX 1 +#define MX2x_DMA_REQ_CSPI3_TX 2 +#define MX2x_DMA_REQ_EXT 3 +#define MX2x_DMA_REQ_SDHC2 6 +#define MX2x_DMA_REQ_SDHC1 7 +#define MX2x_DMA_REQ_SSI2_RX0 8 +#define MX2x_DMA_REQ_SSI2_TX0 9 +#define MX2x_DMA_REQ_SSI2_RX1 10 +#define MX2x_DMA_REQ_SSI2_TX1 11 +#define MX2x_DMA_REQ_SSI1_RX0 12 +#define MX2x_DMA_REQ_SSI1_TX0 13 +#define MX2x_DMA_REQ_SSI1_RX1 14 +#define MX2x_DMA_REQ_SSI1_TX1 15 +#define MX2x_DMA_REQ_CSPI2_RX 16 +#define MX2x_DMA_REQ_CSPI2_TX 17 +#define MX2x_DMA_REQ_CSPI1_RX 18 +#define MX2x_DMA_REQ_CSPI1_TX 19 +#define MX2x_DMA_REQ_UART4_RX 20 +#define MX2x_DMA_REQ_UART4_TX 21 +#define MX2x_DMA_REQ_UART3_RX 22 +#define MX2x_DMA_REQ_UART3_TX 23 +#define MX2x_DMA_REQ_UART2_RX 24 +#define MX2x_DMA_REQ_UART2_TX 25 +#define MX2x_DMA_REQ_UART1_RX 26 +#define MX2x_DMA_REQ_UART1_TX 27 +#define MX2x_DMA_REQ_CSI_STAT 30 +#define MX2x_DMA_REQ_CSI_RX 31 + +#endif /* ifndef __MACH_MX2x_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx31.h b/arch/arm/mach-imx/include/mach/mx31.h new file mode 100644 index 00000000000..ee9b1f9215d --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx31.h @@ -0,0 +1,196 @@ +#ifndef __MACH_MX31_H__ +#define __MACH_MX31_H__ + +/* + * IRAM + */ +#define MX31_IRAM_BASE_ADDR 0x1ffc0000 /* internal ram */ +#define MX31_IRAM_SIZE SZ_16K + +#define MX31_L2CC_BASE_ADDR 0x30000000 +#define MX31_L2CC_SIZE SZ_1M + +#define MX31_AIPS1_BASE_ADDR 0x43f00000 +#define MX31_AIPS1_SIZE SZ_1M +#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000) +#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000) +#define MX31_CLKCTL_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x0c000) +#define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000) +#define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000) +#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000) +#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) +#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000) +#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) +#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000) +#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200) +#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400) +#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000) +#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000) +#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000) +#define MX31_I2C2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x98000) +#define MX31_OWIRE_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x9c000) +#define MX31_SSI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa0000) +#define MX31_CSPI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa4000) +#define MX31_KPP_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa8000) +#define MX31_IOMUXC_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xac000) +#define MX31_UART4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb0000) +#define MX31_UART5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb4000) +#define MX31_ECT_IP1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb8000) +#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000) + +#define MX31_SPBA0_BASE_ADDR 0x50000000 +#define MX31_SPBA0_SIZE SZ_1M +#define MX31_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000) +#define MX31_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000) +#define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000) +#define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000) +#define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000) +#define MX31_SIM1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x18000) +#define MX31_IIM_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x1c000) +#define MX31_ATA_DMA_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x20000) +#define MX31_MSHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x24000) +#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000) + +#define MX31_AIPS2_BASE_ADDR 0x53f00000 +#define MX31_AIPS2_SIZE SZ_1M +#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000) +#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000) +#define MX31_FIRI_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x8c000) +#define MX31_GPT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x90000) +#define MX31_EPIT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x94000) +#define MX31_EPIT2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x98000) +#define MX31_GPIO3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xa4000) +#define MX31_SCC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xac000) +#define MX31_SCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xae000) +#define MX31_SMN_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xaf000) +#define MX31_RNGA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xb0000) +#define MX31_IPU_CTRL_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc0000) +#define MX31_AUDMUX_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc4000) +#define MX31_MPEG4_ENC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc8000) +#define MX31_GPIO1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xcc000) +#define MX31_GPIO2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd0000) +#define MX31_SDMA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd4000) +#define MX31_RTC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd8000) +#define MX31_WDOG_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xdc000) +#define MX31_PWM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xe0000) +#define MX31_RTIC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xec000) + +#define MX31_ROMP_BASE_ADDR 0x60000000 +#define MX31_ROMP_BASE_ADDR_VIRT IOMEM(0xfc500000) +#define MX31_ROMP_SIZE SZ_1M + +#define MX31_AVIC_BASE_ADDR 0x68000000 +#define MX31_AVIC_SIZE SZ_1M + +#define MX31_IPU_MEM_BASE_ADDR 0x70000000 +#define MX31_CSD0_BASE_ADDR 0x80000000 +#define MX31_CSD1_BASE_ADDR 0x90000000 + +#define MX31_CS0_BASE_ADDR 0xa0000000 +#define MX31_CS1_BASE_ADDR 0xa8000000 +#define MX31_CS2_BASE_ADDR 0xb0000000 +#define MX31_CS3_BASE_ADDR 0xb2000000 + +#define MX31_CS4_BASE_ADDR 0xb4000000 +#define MX31_CS4_BASE_ADDR_VIRT IOMEM(0xf6000000) +#define MX31_CS4_SIZE SZ_32M + +#define MX31_CS5_BASE_ADDR 0xb6000000 +#define MX31_CS5_BASE_ADDR_VIRT IOMEM(0xf8000000) +#define MX31_CS5_SIZE SZ_32M + +#define MX31_X_MEMC_BASE_ADDR 0xb8000000 +#define MX31_X_MEMC_SIZE SZ_64K +#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000) +#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000) +#define MX31_WEIM_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x2000) +#define MX31_M3IF_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x3000) +#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000) +#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR + +#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10) +#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs)) +#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) +#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) + +#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000 + +#define MX31_IO_P2V(x) IMX_IO_P2V(x) +#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x)) + +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5) +#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7) +#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8) +#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9) +#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10) +#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11) +#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12) +#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX31_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX31_INT_MBX (NR_IRQS_LEGACY + 16) +#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17) +#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX31_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20) +#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21) +#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX31_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX31_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX31_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX31_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31) +#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX31_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35) +#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36) +#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40) +#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46) +#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47) +#define MX31_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX31_INT_CCM (NR_IRQS_LEGACY + 53) +#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54) +#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63) + +#define MX31_DMA_REQ_SDHC1 20 +#define MX31_DMA_REQ_SDHC2 21 +#define MX31_DMA_REQ_SSI2_RX1 22 +#define MX31_DMA_REQ_SSI2_TX1 23 +#define MX31_DMA_REQ_SSI2_RX0 24 +#define MX31_DMA_REQ_SSI2_TX0 25 +#define MX31_DMA_REQ_SSI1_RX1 26 +#define MX31_DMA_REQ_SSI1_TX1 27 +#define MX31_DMA_REQ_SSI1_RX0 28 +#define MX31_DMA_REQ_SSI1_TX0 29 + +#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */ + +#endif /* ifndef __MACH_MX31_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx35.h b/arch/arm/mach-imx/include/mach/mx35.h new file mode 100644 index 00000000000..2af5d3a699c --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx35.h @@ -0,0 +1,190 @@ +#ifndef __MACH_MX35_H__ +#define __MACH_MX35_H__ + +/* + * IRAM + */ +#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */ +#define MX35_IRAM_SIZE SZ_128K + +#define MX35_L2CC_BASE_ADDR 0x30000000 +#define MX35_L2CC_SIZE SZ_1M + +#define MX35_AIPS1_BASE_ADDR 0x43f00000 +#define MX35_AIPS1_SIZE SZ_1M +#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000) +#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000) +#define MX35_CLKCTL_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x0c000) +#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000) +#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000) +#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000) +#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000) +#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000) +#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000) +#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000) +#define MX35_I2C2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x98000) +#define MX35_OWIRE_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x9c000) +#define MX35_SSI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa0000) +#define MX35_CSPI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa4000) +#define MX35_KPP_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa8000) +#define MX35_IOMUXC_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xac000) +#define MX35_ECT_IP1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xb8000) +#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000) + +#define MX35_SPBA0_BASE_ADDR 0x50000000 +#define MX35_SPBA0_SIZE SZ_1M +#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000) +#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000) +#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000) +#define MX35_ATA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000) +#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000) +#define MX35_FEC_BASE_ADDR 0x50038000 +#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000) + +#define MX35_AIPS2_BASE_ADDR 0x53f00000 +#define MX35_AIPS2_SIZE SZ_1M +#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000) +#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000) +#define MX35_EPIT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x94000) +#define MX35_EPIT2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x98000) +#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000) +#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000) +#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000) +#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000) +#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000) +#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000) +#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000) +#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000) +#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000) +#define MX35_GPIO2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd0000) +#define MX35_SDMA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd4000) +#define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000) +#define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000) +#define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000) +#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000) +#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000) +#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000) +#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000) +#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000) +#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000) +/* + * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for + * HS. When host support was implemented only a preliminary document was + * available, which told 0x400. This works fine. + */ +#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400) + +#define MX35_ROMP_BASE_ADDR 0x60000000 +#define MX35_ROMP_SIZE SZ_1M + +#define MX35_AVIC_BASE_ADDR 0x68000000 +#define MX35_AVIC_SIZE SZ_1M + +/* + * Memory regions and CS + */ +#define MX35_IPU_MEM_BASE_ADDR 0x70000000 +#define MX35_CSD0_BASE_ADDR 0x80000000 +#define MX35_CSD1_BASE_ADDR 0x90000000 + +#define MX35_CS0_BASE_ADDR 0xa0000000 +#define MX35_CS1_BASE_ADDR 0xa8000000 +#define MX35_CS2_BASE_ADDR 0xb0000000 +#define MX35_CS3_BASE_ADDR 0xb2000000 + +#define MX35_CS4_BASE_ADDR 0xb4000000 +#define MX35_CS4_BASE_ADDR_VIRT 0xf6000000 +#define MX35_CS4_SIZE SZ_32M + +#define MX35_CS5_BASE_ADDR 0xb6000000 +#define MX35_CS5_BASE_ADDR_VIRT 0xf8000000 +#define MX35_CS5_SIZE SZ_32M + +/* + * NAND, SDRAM, WEIM, M3IF, EMI controllers + */ +#define MX35_X_MEMC_BASE_ADDR 0xb8000000 +#define MX35_X_MEMC_SIZE SZ_64K +#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000) +#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000) +#define MX35_M3IF_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x3000) +#define MX35_EMI_CTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x4000) +#define MX35_PCMCIA_CTL_BASE_ADDR MX35_EMI_CTL_BASE_ADDR + +#define MX35_NFC_BASE_ADDR 0xbb000000 +#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000 + +#define MX35_IO_P2V(x) IMX_IO_P2V(x) +#define MX35_IO_ADDRESS(x) IOMEM(MX35_IO_P2V(x)) + +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2) +#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7) +#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8) +#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9) +#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10) +#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11) +#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12) +#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX35_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16) +#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17) +#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX35_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX35_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX35_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX35_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX35_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX35_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35) +#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40) +#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43) +#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44) +#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX35_INT_MLB (NR_IRQS_LEGACY + 46) +#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47) +#define MX35_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX35_INT_FEC (NR_IRQS_LEGACY + 57) +#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63) + +#define MX35_DMA_REQ_SSI2_RX1 22 +#define MX35_DMA_REQ_SSI2_TX1 23 +#define MX35_DMA_REQ_SSI2_RX0 24 +#define MX35_DMA_REQ_SSI2_TX0 25 +#define MX35_DMA_REQ_SSI1_RX1 26 +#define MX35_DMA_REQ_SSI1_TX1 27 +#define MX35_DMA_REQ_SSI1_RX0 28 +#define MX35_DMA_REQ_SSI1_TX0 29 + +#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */ + +#endif /* ifndef __MACH_MX35_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx3x.h b/arch/arm/mach-imx/include/mach/mx3x.h new file mode 100644 index 00000000000..96fb4fbc8ad --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx3x.h @@ -0,0 +1,195 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MX3x_H__ +#define __MACH_MX3x_H__ + +/* + * MX31 memory map: + * + * Virt Phys Size What + * --------------------------------------------------------------------------- + * FC000000 43F00000 1M AIPS 1 + * FC100000 50000000 1M SPBA + * FC200000 53F00000 1M AIPS 2 + * FC500000 60000000 128M ROMPATCH + * FC400000 68000000 128M AVIC + * 70000000 256M IPU (MAX M2) + * 80000000 256M CSD0 SDRAM/DDR + * 90000000 256M CSD1 SDRAM/DDR + * A0000000 128M CS0 Flash + * A8000000 128M CS1 Flash + * B0000000 32M CS2 + * B2000000 32M CS3 + * F4000000 B4000000 32M CS4 + * B6000000 32M CS5 + * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers + * C0000000 64M PCMCIA/CF + */ + +/* + * L2CC + */ +#define MX3x_L2CC_BASE_ADDR 0x30000000 +#define MX3x_L2CC_SIZE SZ_1M + +/* + * AIPS 1 + */ +#define MX3x_AIPS1_BASE_ADDR 0x43f00000 +#define MX3x_AIPS1_SIZE SZ_1M +#define MX3x_MAX_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x04000) +#define MX3x_EVTMON_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x08000) +#define MX3x_CLKCTL_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x0c000) +#define MX3x_ETB_SLOT4_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x10000) +#define MX3x_ETB_SLOT5_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x14000) +#define MX3x_ECT_CTIO_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x18000) +#define MX3x_I2C_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x80000) +#define MX3x_I2C3_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x84000) +#define MX3x_UART1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x90000) +#define MX3x_UART2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x94000) +#define MX3x_I2C2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x98000) +#define MX3x_OWIRE_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x9c000) +#define MX3x_SSI1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa0000) +#define MX3x_CSPI1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa4000) +#define MX3x_KPP_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa8000) +#define MX3x_IOMUXC_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xac000) +#define MX3x_ECT_IP1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xb8000) +#define MX3x_ECT_IP2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xbc000) + +/* + * SPBA global module enabled #0 + */ +#define MX3x_SPBA0_BASE_ADDR 0x50000000 +#define MX3x_SPBA0_SIZE SZ_1M +#define MX3x_UART3_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x0c000) +#define MX3x_CSPI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x10000) +#define MX3x_SSI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x14000) +#define MX3x_ATA_DMA_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x20000) +#define MX3x_MSHC1_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x24000) +#define MX3x_SPBA_CTRL_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x3c000) + +/* + * AIPS 2 + */ +#define MX3x_AIPS2_BASE_ADDR 0x53f00000 +#define MX3x_AIPS2_SIZE SZ_1M +#define MX3x_CCM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x80000) +#define MX3x_GPT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x90000) +#define MX3x_EPIT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x94000) +#define MX3x_EPIT2_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x98000) +#define MX3x_GPIO3_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xa4000) +#define MX3x_SCC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xac000) +#define MX3x_RNGA_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xb0000) +#define MX3x_IPU_CTRL_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xc0000) +#define MX3x_AUDMUX_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xc4000) +#define MX3x_GPIO1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xcc000) +#define MX3x_GPIO2_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd0000) +#define MX3x_SDMA_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd4000) +#define MX3x_RTC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd8000) +#define MX3x_WDOG_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xdc000) +#define MX3x_PWM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xe0000) +#define MX3x_RTIC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xec000) + +/* + * ROMP and AVIC + */ +#define MX3x_ROMP_BASE_ADDR 0x60000000 +#define MX3x_ROMP_SIZE SZ_1M + +#define MX3x_AVIC_BASE_ADDR 0x68000000 +#define MX3x_AVIC_SIZE SZ_1M + +/* + * Memory regions and CS + */ +#define MX3x_IPU_MEM_BASE_ADDR 0x70000000 +#define MX3x_CSD0_BASE_ADDR 0x80000000 +#define MX3x_CSD1_BASE_ADDR 0x90000000 + +#define MX3x_CS0_BASE_ADDR 0xa0000000 +#define MX3x_CS1_BASE_ADDR 0xa8000000 +#define MX3x_CS2_BASE_ADDR 0xb0000000 +#define MX3x_CS3_BASE_ADDR 0xb2000000 + +#define MX3x_CS4_BASE_ADDR 0xb4000000 +#define MX3x_CS4_BASE_ADDR_VIRT 0xf6000000 +#define MX3x_CS4_SIZE SZ_32M + +#define MX3x_CS5_BASE_ADDR 0xb6000000 +#define MX3x_CS5_BASE_ADDR_VIRT 0xf8000000 +#define MX3x_CS5_SIZE SZ_32M + +/* + * NAND, SDRAM, WEIM, M3IF, EMI controllers + */ +#define MX3x_X_MEMC_BASE_ADDR 0xb8000000 +#define MX3x_X_MEMC_SIZE SZ_64K +#define MX3x_ESDCTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x1000) +#define MX3x_WEIM_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x2000) +#define MX3x_M3IF_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x3000) +#define MX3x_EMI_CTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x4000) +#define MX3x_PCMCIA_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR + +#define MX3x_PCMCIA_MEM_BASE_ADDR 0xbc000000 + +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX3x_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX3x_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX3x_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX3x_INT_I2C (NR_IRQS_LEGACY + 10) +#define MX3x_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX3x_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX3x_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX3x_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX3x_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX3x_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX3x_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX3x_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX3x_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX3x_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX3x_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX3x_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX3x_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX3x_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX3x_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX3x_INT_NANDFC (NR_IRQS_LEGACY + 33) +#define MX3x_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX3x_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX3x_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX3x_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX3x_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX3x_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX3x_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX3x_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX3x_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX3x_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX3x_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX3x_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX3x_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX3x_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX3x_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX3x_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX3x_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX3x_INT_EXT_TV (NR_IRQS_LEGACY + 63) + +#define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */ + +/* Mandatory defines used globally */ + +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) +extern int mx35_revision(void); +extern int mx31_revision(void); +#endif + +#endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx50.h b/arch/arm/mach-imx/include/mach/mx50.h new file mode 100644 index 00000000000..09ac19c1570 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx50.h @@ -0,0 +1,290 @@ +#ifndef __MACH_MX50_H__ +#define __MACH_MX50_H__ + +/* + * IROM + */ +#define MX50_IROM_BASE_ADDR 0x0 +#define MX50_IROM_SIZE SZ_64K + +/* TZIC */ +#define MX50_TZIC_BASE_ADDR 0x0fffc000 +#define MX50_TZIC_SIZE SZ_16K + +/* + * IRAM + */ +#define MX50_IRAM_BASE_ADDR 0xf8000000 /* internal ram */ +#define MX50_IRAM_PARTITIONS 16 +#define MX50_IRAM_SIZE (MX50_IRAM_PARTITIONS * SZ_8K) /* 128KB */ + +/* + * Databahn + */ +#define MX50_DATABAHN_BASE_ADDR 0x14000000 + +/* + * Graphics Memory of GPU + */ +#define MX50_GPU2D_BASE_ADDR 0x20000000 + +#define MX50_DEBUG_BASE_ADDR 0x40000000 +#define MX50_DEBUG_SIZE SZ_1M +#define MX50_ETB_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00001000) +#define MX50_ETM_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00002000) +#define MX50_TPIU_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00003000) +#define MX50_CTI0_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00004000) +#define MX50_CTI1_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00005000) +#define MX50_CTI2_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00006000) +#define MX50_CTI3_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00007000) +#define MX50_CORTEX_DBG_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00008000) + +#define MX50_APBHDMA_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01000000) +#define MX50_OCOTP_CTRL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01002000) +#define MX50_DIGCTL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01004000) +#define MX50_GPMI_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01006000) +#define MX50_BCH_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01008000) +#define MX50_ELCDIF_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100a000) +#define MX50_EPXP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100c000) +#define MX50_DCP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100e000) +#define MX50_EPDC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01010000) +#define MX50_QOSC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01012000) +#define MX50_PERFMON_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01014000) +#define MX50_SSP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01016000) +#define MX50_ANATOP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01018000) +#define MX50_NIC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x08000000) + +/* + * SPBA global module enabled #0 + */ +#define MX50_SPBA0_BASE_ADDR 0x50000000 +#define MX50_SPBA0_SIZE SZ_1M + +#define MX50_MMC_SDHC1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00004000) +#define MX50_MMC_SDHC2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00008000) +#define MX50_UART3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x0000c000) +#define MX50_CSPI1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00010000) +#define MX50_SSI2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00014000) +#define MX50_MMC_SDHC3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00020000) +#define MX50_MMC_SDHC4_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00024000) + +/* + * AIPS 1 + */ +#define MX50_AIPS1_BASE_ADDR 0x53f00000 +#define MX50_AIPS1_SIZE SZ_1M + +#define MX50_OTG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00080000) +#define MX50_GPIO1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00084000) +#define MX50_GPIO2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00088000) +#define MX50_GPIO3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x0008c000) +#define MX50_GPIO4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00090000) +#define MX50_KPP_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00094000) +#define MX50_WDOG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00098000) +#define MX50_GPT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a0000) +#define MX50_SRTC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a4000) +#define MX50_IOMUXC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a8000) +#define MX50_EPIT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ac000) +#define MX50_PWM1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b4000) +#define MX50_PWM2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b8000) +#define MX50_UART1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000bc000) +#define MX50_UART2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000c0000) +#define MX50_SRC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d0000) +#define MX50_CCM_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d4000) +#define MX50_GPC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d8000) +#define MX50_GPIO5_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000dc000) +#define MX50_GPIO6_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000e0000) +#define MX50_I2C3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ec000) +#define MX50_UART4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f0000) + +#define MX50_MSHC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f4000) +#define MX50_RNGB_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f8000) + +/* + * AIPS 2 + */ +#define MX50_AIPS2_BASE_ADDR 0x63f00000 +#define MX50_AIPS2_SIZE SZ_1M + +#define MX50_PLL1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00080000) +#define MX50_PLL2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00084000) +#define MX50_PLL3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00088000) +#define MX50_UART5_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00090000) +#define MX50_AHBMAX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00094000) +#define MX50_ARM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a0000) +#define MX50_OWIRE_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a4000) +#define MX50_CSPI2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ac000) +#define MX50_SDMA_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b0000) +#define MX50_ROMCP_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b8000) +#define MX50_CSPI3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c0000) +#define MX50_I2C2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c4000) +#define MX50_I2C1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c8000) +#define MX50_SSI1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000cc000) +#define MX50_AUDMUX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d0000) +#define MX50_WEIM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d8000) +#define MX50_FEC_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ec000) + +/* + * Memory regions and CS + */ +#define MX50_CSD0_BASE_ADDR 0x70000000 +#define MX50_CSD1_BASE_ADDR 0xb0000000 +#define MX50_CS0_BASE_ADDR 0xf0000000 + +#define MX50_IO_P2V(x) IMX_IO_P2V(x) +#define MX50_IO_ADDRESS(x) IOMEM(MX50_IO_P2V(x)) + +/* + * defines for SPBA modules + */ +#define MX50_SPBA_SDHC1 0x04 +#define MX50_SPBA_SDHC2 0x08 +#define MX50_SPBA_UART3 0x0c +#define MX50_SPBA_CSPI1 0x10 +#define MX50_SPBA_SSI2 0x14 +#define MX50_SPBA_SDHC3 0x20 +#define MX50_SPBA_SDHC4 0x24 +#define MX50_SPBA_SPDIF 0x28 +#define MX50_SPBA_ATA 0x30 +#define MX50_SPBA_SLIM 0x34 +#define MX50_SPBA_HSI2C 0x38 +#define MX50_SPBA_CTRL 0x3c + +/* + * DMA request assignments + */ +#define MX50_DMA_REQ_GPC 1 +#define MX50_DMA_REQ_ATA_UART4_RX 2 +#define MX50_DMA_REQ_ATA_UART4_TX 3 +#define MX50_DMA_REQ_CSPI1_RX 6 +#define MX50_DMA_REQ_CSPI1_TX 7 +#define MX50_DMA_REQ_CSPI2_RX 8 +#define MX50_DMA_REQ_CSPI2_TX 9 +#define MX50_DMA_REQ_I2C3_SDHC3 10 +#define MX50_DMA_REQ_SDHC4 11 +#define MX50_DMA_REQ_UART2_FIRI_RX 12 +#define MX50_DMA_REQ_UART2_FIRI_TX 13 +#define MX50_DMA_REQ_EXT0 14 +#define MX50_DMA_REQ_EXT1 15 +#define MX50_DMA_REQ_UART5_RX 16 +#define MX50_DMA_REQ_UART5_TX 17 +#define MX50_DMA_REQ_UART1_RX 18 +#define MX50_DMA_REQ_UART1_TX 19 +#define MX50_DMA_REQ_I2C1_SDHC1 20 +#define MX50_DMA_REQ_I2C2_SDHC2 21 +#define MX50_DMA_REQ_SSI2_RX2 22 +#define MX50_DMA_REQ_SSI2_TX2 23 +#define MX50_DMA_REQ_SSI2_RX1 24 +#define MX50_DMA_REQ_SSI2_TX1 25 +#define MX50_DMA_REQ_SSI1_RX2 26 +#define MX50_DMA_REQ_SSI1_TX2 27 +#define MX50_DMA_REQ_SSI1_RX1 28 +#define MX50_DMA_REQ_SSI1_TX1 29 +#define MX50_DMA_REQ_CSPI_RX 38 +#define MX50_DMA_REQ_CSPI_TX 39 +#define MX50_DMA_REQ_UART3_RX 42 +#define MX50_DMA_REQ_UART3_TX 43 + +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX50_INT_MMC_SDHC1 (NR_IRQS_LEGACY + 1) +#define MX50_INT_MMC_SDHC2 (NR_IRQS_LEGACY + 2) +#define MX50_INT_MMC_SDHC3 (NR_IRQS_LEGACY + 3) +#define MX50_INT_MMC_SDHC4 (NR_IRQS_LEGACY + 4) +#define MX50_INT_DAP (NR_IRQS_LEGACY + 5) +#define MX50_INT_SDMA (NR_IRQS_LEGACY + 6) +#define MX50_INT_IOMUX (NR_IRQS_LEGACY + 7) +#define MX50_INT_UART4 (NR_IRQS_LEGACY + 13) +#define MX50_INT_USB_H1 (NR_IRQS_LEGACY + 14) +#define MX50_INT_USB_OTG (NR_IRQS_LEGACY + 18) +#define MX50_INT_DATABAHN (NR_IRQS_LEGACY + 19) +#define MX50_INT_ELCDIF (NR_IRQS_LEGACY + 20) +#define MX50_INT_EPXP (NR_IRQS_LEGACY + 21) +#define MX50_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24) +#define MX50_INT_SRTC_TZ (NR_IRQS_LEGACY + 25) +#define MX50_INT_EPDC (NR_IRQS_LEGACY + 27) +#define MX50_INT_NIC (NR_IRQS_LEGACY + 28) +#define MX50_INT_SSI1 (NR_IRQS_LEGACY + 29) +#define MX50_INT_SSI2 (NR_IRQS_LEGACY + 30) +#define MX50_INT_UART1 (NR_IRQS_LEGACY + 31) +#define MX50_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX50_INT_UART3 (NR_IRQS_LEGACY + 33) +#define MX50_INT_RESV34 (NR_IRQS_LEGACY + 34) +#define MX50_INT_RESV35 (NR_IRQS_LEGACY + 35) +#define MX50_INT_CSPI1 (NR_IRQS_LEGACY + 36) +#define MX50_INT_CSPI2 (NR_IRQS_LEGACY + 37) +#define MX50_INT_CSPI (NR_IRQS_LEGACY + 38) +#define MX50_INT_GPT (NR_IRQS_LEGACY + 39) +#define MX50_INT_EPIT1 (NR_IRQS_LEGACY + 40) +#define MX50_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42) +#define MX50_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43) +#define MX50_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44) +#define MX50_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45) +#define MX50_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46) +#define MX50_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47) +#define MX50_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48) +#define MX50_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49) +#define MX50_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50) +#define MX50_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51) +#define MX50_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52) +#define MX50_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53) +#define MX50_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54) +#define MX50_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55) +#define MX50_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56) +#define MX50_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57) +#define MX50_INT_WDOG1 (NR_IRQS_LEGACY + 58) +#define MX50_INT_KPP (NR_IRQS_LEGACY + 60) +#define MX50_INT_PWM1 (NR_IRQS_LEGACY + 61) +#define MX50_INT_I2C1 (NR_IRQS_LEGACY + 62) +#define MX50_INT_I2C2 (NR_IRQS_LEGACY + 63) +#define MX50_INT_I2C3 (NR_IRQS_LEGACY + 64) +#define MX50_INT_RESV65 (NR_IRQS_LEGACY + 65) +#define MX50_INT_DCDC (NR_IRQS_LEGACY + 66) +#define MX50_INT_THERMAL_ALARM (NR_IRQS_LEGACY + 67) +#define MX50_INT_ANA3 (NR_IRQS_LEGACY + 68) +#define MX50_INT_ANA4 (NR_IRQS_LEGACY + 69) +#define MX50_INT_CCM1 (NR_IRQS_LEGACY + 71) +#define MX50_INT_CCM2 (NR_IRQS_LEGACY + 72) +#define MX50_INT_GPC1 (NR_IRQS_LEGACY + 73) +#define MX50_INT_GPC2 (NR_IRQS_LEGACY + 74) +#define MX50_INT_SRC (NR_IRQS_LEGACY + 75) +#define MX50_INT_NM (NR_IRQS_LEGACY + 76) +#define MX50_INT_PMU (NR_IRQS_LEGACY + 77) +#define MX50_INT_CTI_IRQ (NR_IRQS_LEGACY + 78) +#define MX50_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79) +#define MX50_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80) +#define MX50_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84) +#define MX50_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85) +#define MX50_INT_UART5 (NR_IRQS_LEGACY + 86) +#define MX50_INT_FEC (NR_IRQS_LEGACY + 87) +#define MX50_INT_OWIRE (NR_IRQS_LEGACY + 88) +#define MX50_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89) +#define MX50_INT_SJC (NR_IRQS_LEGACY + 90) +#define MX50_INT_DCP_CHAN1_3 (NR_IRQS_LEGACY + 91) +#define MX50_INT_DCP_CHAN0 (NR_IRQS_LEGACY + 92) +#define MX50_INT_PWM2 (NR_IRQS_LEGACY + 94) +#define MX50_INT_RNGB (NR_IRQS_LEGACY + 97) +#define MX50_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98) +#define MX50_INT_RAWNAND_BCH (NR_IRQS_LEGACY + 100) +#define MX50_INT_RAWNAND_GPMI (NR_IRQS_LEGACY + 102) +#define MX50_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103) +#define MX50_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104) +#define MX50_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105) +#define MX50_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106) +#define MX50_INT_MSHC (NR_IRQS_LEGACY + 109) +#define MX50_INT_APBHDMA_CHAN0 (NR_IRQS_LEGACY + 110) +#define MX50_INT_APBHDMA_CHAN1 (NR_IRQS_LEGACY + 111) +#define MX50_INT_APBHDMA_CHAN2 (NR_IRQS_LEGACY + 112) +#define MX50_INT_APBHDMA_CHAN3 (NR_IRQS_LEGACY + 113) +#define MX50_INT_APBHDMA_CHAN4 (NR_IRQS_LEGACY + 114) +#define MX50_INT_APBHDMA_CHAN5 (NR_IRQS_LEGACY + 115) +#define MX50_INT_APBHDMA_CHAN6 (NR_IRQS_LEGACY + 116) +#define MX50_INT_APBHDMA_CHAN7 (NR_IRQS_LEGACY + 117) + +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) +extern int mx50_revision(void); +#endif + +#endif /* ifndef __MACH_MX50_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx51.h b/arch/arm/mach-imx/include/mach/mx51.h new file mode 100644 index 00000000000..af844f76261 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx51.h @@ -0,0 +1,346 @@ +#ifndef __MACH_MX51_H__ +#define __MACH_MX51_H__ + +/* + * IROM + */ +#define MX51_IROM_BASE_ADDR 0x0 +#define MX51_IROM_SIZE SZ_64K + +/* + * IRAM + */ +#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */ +#define MX51_IRAM_PARTITIONS 16 +#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */ + +#define MX51_GPU_BASE_ADDR 0x20000000 +#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 +#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 + +/* + * SPBA global module enabled #0 + */ +#define MX51_SPBA0_BASE_ADDR 0x70000000 +#define MX51_SPBA0_SIZE SZ_1M + +#define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000) +#define MX51_ESDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x08000) +#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0c000) +#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000) +#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x14000) +#define MX51_ESDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x20000) +#define MX51_ESDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x24000) +#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x28000) +#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x30000) +#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x34000) +#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x38000) +#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x3c000) + +/* + * AIPS 1 + */ +#define MX51_AIPS1_BASE_ADDR 0x73f00000 +#define MX51_AIPS1_SIZE SZ_1M + +#define MX51_USB_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000) +#define MX51_USB_OTG_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0000) +#define MX51_USB_HS1_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0200) +#define MX51_USB_HS2_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0400) +#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000) +#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000) +#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000) +#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000) +#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000) +#define MX51_WDOG1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000) +#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000) +#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000) +#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000) +#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa8000) +#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xac000) +#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb0000) +#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb4000) +#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb8000) +#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xbc000) +#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xc0000) +#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd0000) +#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd4000) +#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd8000) + +/* + * AIPS 2 + */ +#define MX51_AIPS2_BASE_ADDR 0x83f00000 +#define MX51_AIPS2_SIZE SZ_1M + +#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000) +#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x84000) +#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x88000) +#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x94000) +#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x98000) +#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x9c000) +#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa0000) +#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa4000) +#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa8000) +#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000) +#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb0000) +#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb4000) +#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb8000) +#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xbc000) +#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000) +#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc4000) +#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc8000) +#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xcc000) +#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd0000) +#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd8000) +#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd9000) +#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xda000) +#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdb000) +#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdbf00) +#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000) +#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000) +#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000) +#define MX51_SSI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000) +#define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000) +#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000) +#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000) +#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf8000) + +#define MX51_CSD0_BASE_ADDR 0x90000000 +#define MX51_CSD1_BASE_ADDR 0xa0000000 +#define MX51_CS0_BASE_ADDR 0xb0000000 +#define MX51_CS1_BASE_ADDR 0xb8000000 +#define MX51_CS2_BASE_ADDR 0xc0000000 +#define MX51_CS3_BASE_ADDR 0xc8000000 +#define MX51_CS4_BASE_ADDR 0xcc000000 +#define MX51_CS5_BASE_ADDR 0xce000000 + +/* + * NFC + */ +#define MX51_NFC_AXI_BASE_ADDR 0xcfff0000 /* NAND flash AXI */ +#define MX51_NFC_AXI_SIZE SZ_64K + +#define MX51_GPU2D_BASE_ADDR 0xd0000000 +#define MX51_TZIC_BASE_ADDR 0xe0000000 +#define MX51_TZIC_SIZE SZ_16K + +#define MX51_IO_P2V(x) IMX_IO_P2V(x) +#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x)) + +/* + * defines for SPBA modules + */ +#define MX51_SPBA_SDHC1 0x04 +#define MX51_SPBA_SDHC2 0x08 +#define MX51_SPBA_UART3 0x0c +#define MX51_SPBA_CSPI1 0x10 +#define MX51_SPBA_SSI2 0x14 +#define MX51_SPBA_SDHC3 0x20 +#define MX51_SPBA_SDHC4 0x24 +#define MX51_SPBA_SPDIF 0x28 +#define MX51_SPBA_ATA 0x30 +#define MX51_SPBA_SLIM 0x34 +#define MX51_SPBA_HSI2C 0x38 +#define MX51_SPBA_CTRL 0x3c + +/* + * Defines for modules using static and dynamic DMA channels + */ +#define MX51_MXC_DMA_CHANNEL_IRAM 30 +#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL +#ifdef CONFIG_SDMA_IRAM +#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1) +#else /*CONFIG_SDMA_IRAM */ +#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL +#endif /*CONFIG_SDMA_IRAM */ +#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL + +#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 + +/* + * DMA request assignments + */ +#define MX51_DMA_REQ_VPU 0 +#define MX51_DMA_REQ_GPC 1 +#define MX51_DMA_REQ_ATA_RX 2 +#define MX51_DMA_REQ_ATA_TX 3 +#define MX51_DMA_REQ_ATA_TX_END 4 +#define MX51_DMA_REQ_SLIM_B 5 +#define MX51_DMA_REQ_CSPI1_RX 6 +#define MX51_DMA_REQ_CSPI1_TX 7 +#define MX51_DMA_REQ_CSPI2_RX 8 +#define MX51_DMA_REQ_CSPI2_TX 9 +#define MX51_DMA_REQ_HS_I2C_TX 10 +#define MX51_DMA_REQ_HS_I2C_RX 11 +#define MX51_DMA_REQ_FIRI_RX 12 +#define MX51_DMA_REQ_FIRI_TX 13 +#define MX51_DMA_REQ_EXTREQ1 14 +#define MX51_DMA_REQ_GPU 15 +#define MX51_DMA_REQ_UART2_RX 16 +#define MX51_DMA_REQ_UART2_TX 17 +#define MX51_DMA_REQ_UART1_RX 18 +#define MX51_DMA_REQ_UART1_TX 19 +#define MX51_DMA_REQ_SDHC1 20 +#define MX51_DMA_REQ_SDHC2 21 +#define MX51_DMA_REQ_SSI2_RX1 22 +#define MX51_DMA_REQ_SSI2_TX1 23 +#define MX51_DMA_REQ_SSI2_RX0 24 +#define MX51_DMA_REQ_SSI2_TX0 25 +#define MX51_DMA_REQ_SSI1_RX1 26 +#define MX51_DMA_REQ_SSI1_TX1 27 +#define MX51_DMA_REQ_SSI1_RX0 28 +#define MX51_DMA_REQ_SSI1_TX0 29 +#define MX51_DMA_REQ_EMI_RD 30 +#define MX51_DMA_REQ_CTI2_0 31 +#define MX51_DMA_REQ_EMI_WR 32 +#define MX51_DMA_REQ_CTI2_1 33 +#define MX51_DMA_REQ_EPIT2 34 +#define MX51_DMA_REQ_SSI3_RX1 35 +#define MX51_DMA_REQ_IPU 36 +#define MX51_DMA_REQ_SSI3_TX1 37 +#define MX51_DMA_REQ_CSPI_RX 38 +#define MX51_DMA_REQ_CSPI_TX 39 +#define MX51_DMA_REQ_SDHC3 40 +#define MX51_DMA_REQ_SDHC4 41 +#define MX51_DMA_REQ_SLIM_B_TX 42 +#define MX51_DMA_REQ_UART3_RX 43 +#define MX51_DMA_REQ_UART3_TX 44 +#define MX51_DMA_REQ_SPDIF 45 +#define MX51_DMA_REQ_SSI3_RX0 46 +#define MX51_DMA_REQ_SSI3_TX0 47 + +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX51_INT_BASE (NR_IRQS_LEGACY + 0) +#define MX51_INT_RESV0 (NR_IRQS_LEGACY + 0) +#define MX51_INT_ESDHC1 (NR_IRQS_LEGACY + 1) +#define MX51_INT_ESDHC2 (NR_IRQS_LEGACY + 2) +#define MX51_INT_ESDHC3 (NR_IRQS_LEGACY + 3) +#define MX51_INT_ESDHC4 (NR_IRQS_LEGACY + 4) +#define MX51_INT_RESV5 (NR_IRQS_LEGACY + 5) +#define MX51_INT_SDMA (NR_IRQS_LEGACY + 6) +#define MX51_INT_IOMUX (NR_IRQS_LEGACY + 7) +#define MX51_INT_NFC (NR_IRQS_LEGACY + 8) +#define MX51_INT_VPU (NR_IRQS_LEGACY + 9) +#define MX51_INT_IPU_ERR (NR_IRQS_LEGACY + 10) +#define MX51_INT_IPU_SYN (NR_IRQS_LEGACY + 11) +#define MX51_INT_GPU (NR_IRQS_LEGACY + 12) +#define MX51_INT_RESV13 (NR_IRQS_LEGACY + 13) +#define MX51_INT_USB_HS1 (NR_IRQS_LEGACY + 14) +#define MX51_INT_EMI (NR_IRQS_LEGACY + 15) +#define MX51_INT_USB_HS2 (NR_IRQS_LEGACY + 16) +#define MX51_INT_USB_HS3 (NR_IRQS_LEGACY + 17) +#define MX51_INT_USB_OTG (NR_IRQS_LEGACY + 18) +#define MX51_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19) +#define MX51_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20) +#define MX51_INT_SCC_SMN (NR_IRQS_LEGACY + 21) +#define MX51_INT_SCC_STZ (NR_IRQS_LEGACY + 22) +#define MX51_INT_SCC_SCM (NR_IRQS_LEGACY + 23) +#define MX51_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24) +#define MX51_INT_SRTC_TZ (NR_IRQS_LEGACY + 25) +#define MX51_INT_RTIC (NR_IRQS_LEGACY + 26) +#define MX51_INT_CSU (NR_IRQS_LEGACY + 27) +#define MX51_INT_SLIM_B (NR_IRQS_LEGACY + 28) +#define MX51_INT_SSI1 (NR_IRQS_LEGACY + 29) +#define MX51_INT_SSI2 (NR_IRQS_LEGACY + 30) +#define MX51_INT_UART1 (NR_IRQS_LEGACY + 31) +#define MX51_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX51_INT_UART3 (NR_IRQS_LEGACY + 33) +#define MX51_INT_RESV34 (NR_IRQS_LEGACY + 34) +#define MX51_INT_RESV35 (NR_IRQS_LEGACY + 35) +#define MX51_INT_ECSPI1 (NR_IRQS_LEGACY + 36) +#define MX51_INT_ECSPI2 (NR_IRQS_LEGACY + 37) +#define MX51_INT_CSPI (NR_IRQS_LEGACY + 38) +#define MX51_INT_GPT (NR_IRQS_LEGACY + 39) +#define MX51_INT_EPIT1 (NR_IRQS_LEGACY + 40) +#define MX51_INT_EPIT2 (NR_IRQS_LEGACY + 41) +#define MX51_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42) +#define MX51_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43) +#define MX51_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44) +#define MX51_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45) +#define MX51_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46) +#define MX51_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47) +#define MX51_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48) +#define MX51_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49) +#define MX51_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50) +#define MX51_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51) +#define MX51_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52) +#define MX51_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53) +#define MX51_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54) +#define MX51_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55) +#define MX51_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56) +#define MX51_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57) +#define MX51_INT_WDOG1 (NR_IRQS_LEGACY + 58) +#define MX51_INT_WDOG2 (NR_IRQS_LEGACY + 59) +#define MX51_INT_KPP (NR_IRQS_LEGACY + 60) +#define MX51_INT_PWM1 (NR_IRQS_LEGACY + 61) +#define MX51_INT_I2C1 (NR_IRQS_LEGACY + 62) +#define MX51_INT_I2C2 (NR_IRQS_LEGACY + 63) +#define MX51_INT_HS_I2C (NR_IRQS_LEGACY + 64) +#define MX51_INT_RESV65 (NR_IRQS_LEGACY + 65) +#define MX51_INT_RESV66 (NR_IRQS_LEGACY + 66) +#define MX51_INT_SIM_IPB (NR_IRQS_LEGACY + 67) +#define MX51_INT_SIM_DAT (NR_IRQS_LEGACY + 68) +#define MX51_INT_IIM (NR_IRQS_LEGACY + 69) +#define MX51_INT_ATA (NR_IRQS_LEGACY + 70) +#define MX51_INT_CCM1 (NR_IRQS_LEGACY + 71) +#define MX51_INT_CCM2 (NR_IRQS_LEGACY + 72) +#define MX51_INT_GPC1 (NR_IRQS_LEGACY + 73) +#define MX51_INT_GPC2 (NR_IRQS_LEGACY + 74) +#define MX51_INT_SRC (NR_IRQS_LEGACY + 75) +#define MX51_INT_NM (NR_IRQS_LEGACY + 76) +#define MX51_INT_PMU (NR_IRQS_LEGACY + 77) +#define MX51_INT_CTI_IRQ (NR_IRQS_LEGACY + 78) +#define MX51_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79) +#define MX51_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80) +#define MX51_INT_MCG_ERR (NR_IRQS_LEGACY + 81) +#define MX51_INT_MCG_TMR (NR_IRQS_LEGACY + 82) +#define MX51_INT_MCG_FUNC (NR_IRQS_LEGACY + 83) +#define MX51_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84) +#define MX51_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85) +#define MX51_INT_RESV86 (NR_IRQS_LEGACY + 86) +#define MX51_INT_FEC (NR_IRQS_LEGACY + 87) +#define MX51_INT_OWIRE (NR_IRQS_LEGACY + 88) +#define MX51_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89) +#define MX51_INT_SJC (NR_IRQS_LEGACY + 90) +#define MX51_INT_SPDIF (NR_IRQS_LEGACY + 91) +#define MX51_INT_TVE (NR_IRQS_LEGACY + 92) +#define MX51_INT_FIRI (NR_IRQS_LEGACY + 93) +#define MX51_INT_PWM2 (NR_IRQS_LEGACY + 94) +#define MX51_INT_SLIM_EXP (NR_IRQS_LEGACY + 95) +#define MX51_INT_SSI3 (NR_IRQS_LEGACY + 96) +#define MX51_INT_EMI_BOOT (NR_IRQS_LEGACY + 97) +#define MX51_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98) +#define MX51_INT_SMC_RX (NR_IRQS_LEGACY + 99) +#define MX51_INT_VPU_IDLE (NR_IRQS_LEGACY + 100) +#define MX51_INT_EMI_NFC (NR_IRQS_LEGACY + 101) +#define MX51_INT_GPU_IDLE (NR_IRQS_LEGACY + 102) + +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) +extern int mx51_revision(void); +extern void mx51_display_revision(void); +#endif + +#endif /* ifndef __MACH_MX51_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx53.h b/arch/arm/mach-imx/include/mach/mx53.h new file mode 100644 index 00000000000..f829d1c2250 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx53.h @@ -0,0 +1,342 @@ +#ifndef __MACH_MX53_H__ +#define __MACH_MX53_H__ + +/* + * IROM + */ +#define MX53_IROM_BASE_ADDR 0x0 +#define MX53_IROM_SIZE SZ_64K + +/* TZIC */ +#define MX53_TZIC_BASE_ADDR 0x0FFFC000 +#define MX53_TZIC_SIZE SZ_16K + +/* + * AHCI SATA + */ +#define MX53_SATA_BASE_ADDR 0x10000000 + +/* + * NFC + */ +#define MX53_NFC_AXI_BASE_ADDR 0xF7FF0000 /* NAND flash AXI */ +#define MX53_NFC_AXI_SIZE SZ_64K + +/* + * IRAM + */ +#define MX53_IRAM_BASE_ADDR 0xF8000000 /* internal ram */ +#define MX53_IRAM_PARTITIONS 16 +#define MX53_IRAM_SIZE (MX53_IRAM_PARTITIONS * SZ_8K) /* 128KB */ + +/* + * Graphics Memory of GPU + */ +#define MX53_IPU_CTRL_BASE_ADDR 0x18000000 +#define MX53_GPU2D_BASE_ADDR 0x20000000 +#define MX53_GPU_BASE_ADDR 0x30000000 +#define MX53_GPU_GMEM_BASE_ADDR 0xF8020000 + +#define MX53_DEBUG_BASE_ADDR 0x40000000 +#define MX53_DEBUG_SIZE SZ_1M +#define MX53_ETB_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00001000) +#define MX53_ETM_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00002000) +#define MX53_TPIU_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00003000) +#define MX53_CTI0_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00004000) +#define MX53_CTI1_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00005000) +#define MX53_CTI2_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00006000) +#define MX53_CTI3_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00007000) +#define MX53_CORTEX_DBG_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00008000) + +/* + * SPBA global module enabled #0 + */ +#define MX53_SPBA0_BASE_ADDR 0x50000000 +#define MX53_SPBA0_SIZE SZ_1M + +#define MX53_ESDHC1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00004000) +#define MX53_ESDHC2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00008000) +#define MX53_UART3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0000C000) +#define MX53_ECSPI1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00010000) +#define MX53_SSI2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00014000) +#define MX53_ESDHC3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00020000) +#define MX53_ESDHC4_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00024000) +#define MX53_SPDIF_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00028000) +#define MX53_ASRC_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0002C000) +#define MX53_ATA_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00030000) +#define MX53_SLIM_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00034000) +#define MX53_HSI2C_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00038000) +#define MX53_SPBA_CTRL_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0003C000) + +/* + * AIPS 1 + */ +#define MX53_AIPS1_BASE_ADDR 0x53F00000 +#define MX53_AIPS1_SIZE SZ_1M + +#define MX53_OTG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00080000) +#define MX53_GPIO1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00084000) +#define MX53_GPIO2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00088000) +#define MX53_GPIO3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0008C000) +#define MX53_GPIO4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00090000) +#define MX53_KPP_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00094000) +#define MX53_WDOG1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000) +#define MX53_WDOG2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0009C000) +#define MX53_GPT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A0000) +#define MX53_SRTC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A4000) +#define MX53_IOMUXC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A8000) +#define MX53_EPIT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000AC000) +#define MX53_EPIT2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B0000) +#define MX53_PWM1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B4000) +#define MX53_PWM2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B8000) +#define MX53_UART1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000BC000) +#define MX53_UART2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000C0000) +#define MX53_SRC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D0000) +#define MX53_CCM_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D4000) +#define MX53_GPC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D8000) +#define MX53_GPIO5_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000DC000) +#define MX53_GPIO6_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E0000) +#define MX53_GPIO7_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E4000) +#define MX53_ATA_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E8000) +#define MX53_I2C3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000EC000) +#define MX53_UART4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000F0000) + +/* + * AIPS 2 + */ +#define MX53_AIPS2_BASE_ADDR 0x63F00000 +#define MX53_AIPS2_SIZE SZ_1M + +#define MX53_PLL1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00080000) +#define MX53_PLL2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00084000) +#define MX53_PLL3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00088000) +#define MX53_PLL4_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0008C000) +#define MX53_UART5_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00090000) +#define MX53_AHBMAX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00094000) +#define MX53_IIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00098000) +#define MX53_CSU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0009C000) +#define MX53_ARM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A0000) +#define MX53_OWIRE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A4000) +#define MX53_FIRI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A8000) +#define MX53_ECSPI2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000AC000) +#define MX53_SDMA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B0000) +#define MX53_SCC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B4000) +#define MX53_ROMCP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B8000) +#define MX53_RTIC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000BC000) +#define MX53_CSPI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C0000) +#define MX53_I2C2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C4000) +#define MX53_I2C1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C8000) +#define MX53_SSI1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000CC000) +#define MX53_AUDMUX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D0000) +#define MX53_RTC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D4000) +#define MX53_M4IF_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D8000) +#define MX53_ESDCTL_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D9000) +#define MX53_WEIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DA000) +#define MX53_NFC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DB000) +#define MX53_EMI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DBF00) +#define MX53_MIPI_HSC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DC000) +#define MX53_MLB_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E4000) +#define MX53_SSI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E8000) +#define MX53_FEC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000EC000) +#define MX53_TVE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F0000) +#define MX53_VPU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F4000) +#define MX53_SAHARA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F8000) +#define MX53_PTP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000FC000) + +/* + * Memory regions and CS + */ +#define MX53_CSD0_BASE_ADDR 0x70000000 +#define MX53_CSD1_BASE_ADDR 0xB0000000 +#define MX53_CS0_BASE_ADDR 0xF0000000 +#define MX53_CS1_32MB_BASE_ADDR 0xF2000000 +#define MX53_CS1_64MB_BASE_ADDR 0xF4000000 +#define MX53_CS2_64MB_BASE_ADDR 0xF4000000 +#define MX53_CS2_96MB_BASE_ADDR 0xF6000000 +#define MX53_CS3_BASE_ADDR 0xF6000000 + +#define MX53_IO_P2V(x) IMX_IO_P2V(x) +#define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x)) + +/* + * defines for SPBA modules + */ +#define MX53_SPBA_SDHC1 0x04 +#define MX53_SPBA_SDHC2 0x08 +#define MX53_SPBA_UART3 0x0C +#define MX53_SPBA_CSPI1 0x10 +#define MX53_SPBA_SSI2 0x14 +#define MX53_SPBA_SDHC3 0x20 +#define MX53_SPBA_SDHC4 0x24 +#define MX53_SPBA_SPDIF 0x28 +#define MX53_SPBA_ATA 0x30 +#define MX53_SPBA_SLIM 0x34 +#define MX53_SPBA_HSI2C 0x38 +#define MX53_SPBA_CTRL 0x3C + +/* + * DMA request assignments + */ +#define MX53_DMA_REQ_SSI3_TX0 47 +#define MX53_DMA_REQ_SSI3_RX0 46 +#define MX53_DMA_REQ_SSI3_TX1 45 +#define MX53_DMA_REQ_SSI3_RX1 44 +#define MX53_DMA_REQ_UART3_TX 43 +#define MX53_DMA_REQ_UART3_RX 42 +#define MX53_DMA_REQ_ESAI_TX 41 +#define MX53_DMA_REQ_ESAI_RX 40 +#define MX53_DMA_REQ_CSPI_TX 39 +#define MX53_DMA_REQ_CSPI_RX 38 +#define MX53_DMA_REQ_ASRC_DMA6 37 +#define MX53_DMA_REQ_ASRC_DMA5 36 +#define MX53_DMA_REQ_ASRC_DMA4 35 +#define MX53_DMA_REQ_ASRC_DMA3 34 +#define MX53_DMA_REQ_ASRC_DMA2 33 +#define MX53_DMA_REQ_ASRC_DMA1 32 +#define MX53_DMA_REQ_EMI_WR 31 +#define MX53_DMA_REQ_EMI_RD 30 +#define MX53_DMA_REQ_SSI1_TX0 29 +#define MX53_DMA_REQ_SSI1_RX0 28 +#define MX53_DMA_REQ_SSI1_TX1 27 +#define MX53_DMA_REQ_SSI1_RX1 26 +#define MX53_DMA_REQ_SSI2_TX0 25 +#define MX53_DMA_REQ_SSI2_RX0 24 +#define MX53_DMA_REQ_SSI2_TX1 23 +#define MX53_DMA_REQ_SSI2_RX1 22 +#define MX53_DMA_REQ_I2C2_SDHC2 21 +#define MX53_DMA_REQ_I2C1_SDHC1 20 +#define MX53_DMA_REQ_UART1_TX 19 +#define MX53_DMA_REQ_UART1_RX 18 +#define MX53_DMA_REQ_UART5_TX 17 +#define MX53_DMA_REQ_UART5_RX 16 +#define MX53_DMA_REQ_SPDIF_TX 15 +#define MX53_DMA_REQ_SPDIF_RX 14 +#define MX53_DMA_REQ_UART2_FIRI_TX 13 +#define MX53_DMA_REQ_UART2_FIRI_RX 12 +#define MX53_DMA_REQ_SDHC4 11 +#define MX53_DMA_REQ_I2C3_SDHC3 10 +#define MX53_DMA_REQ_CSPI2_TX 9 +#define MX53_DMA_REQ_CSPI2_RX 8 +#define MX53_DMA_REQ_CSPI1_TX 7 +#define MX53_DMA_REQ_CSPI1_RX 6 +#define MX53_DMA_REQ_IPU 5 +#define MX53_DMA_REQ_ATA_TX_END 4 +#define MX53_DMA_REQ_ATA_UART4_TX 3 +#define MX53_DMA_REQ_ATA_UART4_RX 2 +#define MX53_DMA_REQ_GPC 1 +#define MX53_DMA_REQ_VPU 0 + +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX53_INT_RESV0 (NR_IRQS_LEGACY + 0) +#define MX53_INT_ESDHC1 (NR_IRQS_LEGACY + 1) +#define MX53_INT_ESDHC2 (NR_IRQS_LEGACY + 2) +#define MX53_INT_ESDHC3 (NR_IRQS_LEGACY + 3) +#define MX53_INT_ESDHC4 (NR_IRQS_LEGACY + 4) +#define MX53_INT_DAP (NR_IRQS_LEGACY + 5) +#define MX53_INT_SDMA (NR_IRQS_LEGACY + 6) +#define MX53_INT_IOMUX (NR_IRQS_LEGACY + 7) +#define MX53_INT_NFC (NR_IRQS_LEGACY + 8) +#define MX53_INT_VPU (NR_IRQS_LEGACY + 9) +#define MX53_INT_IPU_ERR (NR_IRQS_LEGACY + 10) +#define MX53_INT_IPU_SYN (NR_IRQS_LEGACY + 11) +#define MX53_INT_GPU (NR_IRQS_LEGACY + 12) +#define MX53_INT_UART4 (NR_IRQS_LEGACY + 13) +#define MX53_INT_USB_H1 (NR_IRQS_LEGACY + 14) +#define MX53_INT_EMI (NR_IRQS_LEGACY + 15) +#define MX53_INT_USB_H2 (NR_IRQS_LEGACY + 16) +#define MX53_INT_USB_H3 (NR_IRQS_LEGACY + 17) +#define MX53_INT_USB_OTG (NR_IRQS_LEGACY + 18) +#define MX53_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19) +#define MX53_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20) +#define MX53_INT_SCC_SMN (NR_IRQS_LEGACY + 21) +#define MX53_INT_SCC_STZ (NR_IRQS_LEGACY + 22) +#define MX53_INT_SCC_SCM (NR_IRQS_LEGACY + 23) +#define MX53_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24) +#define MX53_INT_SRTC_TZ (NR_IRQS_LEGACY + 25) +#define MX53_INT_RTIC (NR_IRQS_LEGACY + 26) +#define MX53_INT_CSU (NR_IRQS_LEGACY + 27) +#define MX53_INT_SATA (NR_IRQS_LEGACY + 28) +#define MX53_INT_SSI1 (NR_IRQS_LEGACY + 29) +#define MX53_INT_SSI2 (NR_IRQS_LEGACY + 30) +#define MX53_INT_UART1 (NR_IRQS_LEGACY + 31) +#define MX53_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX53_INT_UART3 (NR_IRQS_LEGACY + 33) +#define MX53_INT_RTC (NR_IRQS_LEGACY + 34) +#define MX53_INT_PTP (NR_IRQS_LEGACY + 35) +#define MX53_INT_ECSPI1 (NR_IRQS_LEGACY + 36) +#define MX53_INT_ECSPI2 (NR_IRQS_LEGACY + 37) +#define MX53_INT_CSPI (NR_IRQS_LEGACY + 38) +#define MX53_INT_GPT (NR_IRQS_LEGACY + 39) +#define MX53_INT_EPIT1 (NR_IRQS_LEGACY + 40) +#define MX53_INT_EPIT2 (NR_IRQS_LEGACY + 41) +#define MX53_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42) +#define MX53_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43) +#define MX53_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44) +#define MX53_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45) +#define MX53_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46) +#define MX53_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47) +#define MX53_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48) +#define MX53_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49) +#define MX53_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50) +#define MX53_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51) +#define MX53_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52) +#define MX53_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53) +#define MX53_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54) +#define MX53_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55) +#define MX53_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56) +#define MX53_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57) +#define MX53_INT_WDOG1 (NR_IRQS_LEGACY + 58) +#define MX53_INT_WDOG2 (NR_IRQS_LEGACY + 59) +#define MX53_INT_KPP (NR_IRQS_LEGACY + 60) +#define MX53_INT_PWM1 (NR_IRQS_LEGACY + 61) +#define MX53_INT_I2C1 (NR_IRQS_LEGACY + 62) +#define MX53_INT_I2C2 (NR_IRQS_LEGACY + 63) +#define MX53_INT_I2C3 (NR_IRQS_LEGACY + 64) +#define MX53_INT_MLB (NR_IRQS_LEGACY + 65) +#define MX53_INT_ASRC (NR_IRQS_LEGACY + 66) +#define MX53_INT_SPDIF (NR_IRQS_LEGACY + 67) +#define MX53_INT_SIM_DAT (NR_IRQS_LEGACY + 68) +#define MX53_INT_IIM (NR_IRQS_LEGACY + 69) +#define MX53_INT_ATA (NR_IRQS_LEGACY + 70) +#define MX53_INT_CCM1 (NR_IRQS_LEGACY + 71) +#define MX53_INT_CCM2 (NR_IRQS_LEGACY + 72) +#define MX53_INT_GPC1 (NR_IRQS_LEGACY + 73) +#define MX53_INT_GPC2 (NR_IRQS_LEGACY + 74) +#define MX53_INT_SRC (NR_IRQS_LEGACY + 75) +#define MX53_INT_NM (NR_IRQS_LEGACY + 76) +#define MX53_INT_PMU (NR_IRQS_LEGACY + 77) +#define MX53_INT_CTI_IRQ (NR_IRQS_LEGACY + 78) +#define MX53_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79) +#define MX53_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80) +#define MX53_INT_ESAI (NR_IRQS_LEGACY + 81) +#define MX53_INT_CAN1 (NR_IRQS_LEGACY + 82) +#define MX53_INT_CAN2 (NR_IRQS_LEGACY + 83) +#define MX53_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84) +#define MX53_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85) +#define MX53_INT_UART5 (NR_IRQS_LEGACY + 86) +#define MX53_INT_FEC (NR_IRQS_LEGACY + 87) +#define MX53_INT_OWIRE (NR_IRQS_LEGACY + 88) +#define MX53_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89) +#define MX53_INT_SJC (NR_IRQS_LEGACY + 90) +#define MX53_INT_TVE (NR_IRQS_LEGACY + 92) +#define MX53_INT_FIRI (NR_IRQS_LEGACY + 93) +#define MX53_INT_PWM2 (NR_IRQS_LEGACY + 94) +#define MX53_INT_SLIM_EXP (NR_IRQS_LEGACY + 95) +#define MX53_INT_SSI3 (NR_IRQS_LEGACY + 96) +#define MX53_INT_EMI_BOOT (NR_IRQS_LEGACY + 97) +#define MX53_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98) +#define MX53_INT_SMC_RX (NR_IRQS_LEGACY + 99) +#define MX53_INT_VPU_IDLE (NR_IRQS_LEGACY + 100) +#define MX53_INT_EMI_NFC (NR_IRQS_LEGACY + 101) +#define MX53_INT_GPU_IDLE (NR_IRQS_LEGACY + 102) +#define MX53_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103) +#define MX53_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104) +#define MX53_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105) +#define MX53_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106) +#define MX53_INT_GPIO7_LOW (NR_IRQS_LEGACY + 107) +#define MX53_INT_GPIO7_HIGH (NR_IRQS_LEGACY + 108) + +#endif /* ifndef __MACH_MX53_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mx6q.h b/arch/arm/mach-imx/include/mach/mx6q.h new file mode 100644 index 00000000000..f7e7dbac8f4 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mx6q.h @@ -0,0 +1,35 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MACH_MX6Q_H__ +#define __MACH_MX6Q_H__ + +#define MX6Q_IO_P2V(x) IMX_IO_P2V(x) +#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x)) + +/* + * The following are the blocks that need to be statically mapped. + * For other blocks, the base address really should be retrieved from + * device tree. + */ +#define MX6Q_SCU_BASE_ADDR 0x00a00000 +#define MX6Q_SCU_SIZE 0x1000 +#define MX6Q_CCM_BASE_ADDR 0x020c4000 +#define MX6Q_CCM_SIZE 0x4000 +#define MX6Q_ANATOP_BASE_ADDR 0x020c8000 +#define MX6Q_ANATOP_SIZE 0x1000 +#define MX6Q_UART2_BASE_ADDR 0x021e8000 +#define MX6Q_UART2_SIZE 0x4000 +#define MX6Q_UART4_BASE_ADDR 0x021f0000 +#define MX6Q_UART4_SIZE 0x4000 + +#endif /* __MACH_MX6Q_H__ */ diff --git a/arch/arm/mach-imx/include/mach/mxc.h b/arch/arm/mach-imx/include/mach/mxc.h new file mode 100644 index 00000000000..d78298366a9 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/mxc.h @@ -0,0 +1,179 @@ +/* + * Copyright 2004-2007, 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_H__ +#define __ASM_ARCH_MXC_H__ + +#include <linux/types.h> + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#error "Do not include directly." +#endif + +#define MXC_CPU_MX1 1 +#define MXC_CPU_MX21 21 +#define MXC_CPU_MX25 25 +#define MXC_CPU_MX27 27 +#define MXC_CPU_MX31 31 +#define MXC_CPU_MX35 35 +#define MXC_CPU_MX50 50 +#define MXC_CPU_MX51 51 +#define MXC_CPU_MX53 53 + +#define IMX_CHIP_REVISION_1_0 0x10 +#define IMX_CHIP_REVISION_1_1 0x11 +#define IMX_CHIP_REVISION_1_2 0x12 +#define IMX_CHIP_REVISION_1_3 0x13 +#define IMX_CHIP_REVISION_2_0 0x20 +#define IMX_CHIP_REVISION_2_1 0x21 +#define IMX_CHIP_REVISION_2_2 0x22 +#define IMX_CHIP_REVISION_2_3 0x23 +#define IMX_CHIP_REVISION_3_0 0x30 +#define IMX_CHIP_REVISION_3_1 0x31 +#define IMX_CHIP_REVISION_3_2 0x32 +#define IMX_CHIP_REVISION_3_3 0x33 +#define IMX_CHIP_REVISION_UNKNOWN 0xff + +#ifndef __ASSEMBLY__ +extern unsigned int __mxc_cpu_type; +#endif + +#ifdef CONFIG_SOC_IMX1 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX1 +# endif +# define cpu_is_mx1() (mxc_cpu_type == MXC_CPU_MX1) +#else +# define cpu_is_mx1() (0) +#endif + +#ifdef CONFIG_SOC_IMX21 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX21 +# endif +# define cpu_is_mx21() (mxc_cpu_type == MXC_CPU_MX21) +#else +# define cpu_is_mx21() (0) +#endif + +#ifdef CONFIG_SOC_IMX25 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX25 +# endif +# define cpu_is_mx25() (mxc_cpu_type == MXC_CPU_MX25) +#else +# define cpu_is_mx25() (0) +#endif + +#ifdef CONFIG_SOC_IMX27 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX27 +# endif +# define cpu_is_mx27() (mxc_cpu_type == MXC_CPU_MX27) +#else +# define cpu_is_mx27() (0) +#endif + +#ifdef CONFIG_SOC_IMX31 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX31 +# endif +# define cpu_is_mx31() (mxc_cpu_type == MXC_CPU_MX31) +#else +# define cpu_is_mx31() (0) +#endif + +#ifdef CONFIG_SOC_IMX35 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX35 +# endif +# define cpu_is_mx35() (mxc_cpu_type == MXC_CPU_MX35) +#else +# define cpu_is_mx35() (0) +#endif + +#ifdef CONFIG_SOC_IMX50 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX50 +# endif +# define cpu_is_mx50() (mxc_cpu_type == MXC_CPU_MX50) +#else +# define cpu_is_mx50() (0) +#endif + +#ifdef CONFIG_SOC_IMX51 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX51 +# endif +# define cpu_is_mx51() (mxc_cpu_type == MXC_CPU_MX51) +#else +# define cpu_is_mx51() (0) +#endif + +#ifdef CONFIG_SOC_IMX53 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX53 +# endif +# define cpu_is_mx53() (mxc_cpu_type == MXC_CPU_MX53) +#else +# define cpu_is_mx53() (0) +#endif + +#ifndef __ASSEMBLY__ + +struct cpu_op { + u32 cpu_rate; +}; + +int tzic_enable_wake(void); + +extern struct cpu_op *(*get_cpu_op)(int *op); +#endif + +#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) +#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) + +#endif /* __ASM_ARCH_MXC_H__ */ diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-imx/include/mach/timex.h new file mode 100644 index 00000000000..10343d1f87e --- /dev/null +++ b/arch/arm/mach-imx/include/mach/timex.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MXC_TIMEX_H__ +#define __ASM_ARCH_MXC_TIMEX_H__ + +/* Bogus value */ +#define CLOCK_TICK_RATE 12345678 + +#endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/arch/arm/mach-imx/include/mach/ulpi.h b/arch/arm/mach-imx/include/mach/ulpi.h new file mode 100644 index 00000000000..42bdaca6d7d --- /dev/null +++ b/arch/arm/mach-imx/include/mach/ulpi.h @@ -0,0 +1,16 @@ +#ifndef __MACH_ULPI_H +#define __MACH_ULPI_H + +#ifdef CONFIG_USB_ULPI +struct usb_phy *imx_otg_ulpi_create(unsigned int flags); +#else +static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) +{ + return NULL; +} +#endif + +extern struct usb_phy_io_ops mxc_ulpi_access_ops; + +#endif /* __MACH_ULPI_H */ + diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h new file mode 100644 index 00000000000..477971b0093 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/uncompress.h @@ -0,0 +1,132 @@ +/* + * arch/arm/plat-mxc/include/mach/uncompress.h + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__ +#define __ASM_ARCH_MXC_UNCOMPRESS_H__ + +#define __MXC_BOOT_UNCOMPRESS + +#include <asm/mach-types.h> + +unsigned long uart_base; + +#define UART(x) (*(volatile unsigned long *)(uart_base + (x))) + +#define USR2 0x98 +#define USR2_TXFE (1<<14) +#define TXR 0x40 +#define UCR1 0x80 +#define UCR1_UARTEN 1 + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. We search for the first enabled + * port in the most probable order. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * + * This does not append a newline + */ + +static void putc(int ch) +{ + if (!uart_base) + return; + if (!(UART(UCR1) & UCR1_UARTEN)) + return; + + while (!(UART(USR2) & USR2_TXFE)) + barrier(); + + UART(TXR) = ch; +} + +static inline void flush(void) +{ +} + +#define MX1_UART1_BASE_ADDR 0x00206000 +#define MX25_UART1_BASE_ADDR 0x43f90000 +#define MX2X_UART1_BASE_ADDR 0x1000a000 +#define MX3X_UART1_BASE_ADDR 0x43F90000 +#define MX3X_UART2_BASE_ADDR 0x43F94000 +#define MX3X_UART5_BASE_ADDR 0x43FB4000 +#define MX51_UART1_BASE_ADDR 0x73fbc000 +#define MX50_UART1_BASE_ADDR 0x53fbc000 +#define MX53_UART1_BASE_ADDR 0x53fbc000 + +static __inline__ void __arch_decomp_setup(unsigned long arch_id) +{ + switch (arch_id) { + case MACH_TYPE_MX1ADS: + case MACH_TYPE_SCB9328: + uart_base = MX1_UART1_BASE_ADDR; + break; + case MACH_TYPE_MX25_3DS: + uart_base = MX25_UART1_BASE_ADDR; + break; + case MACH_TYPE_IMX27LITE: + case MACH_TYPE_MX27_3DS: + case MACH_TYPE_MX27ADS: + case MACH_TYPE_PCM038: + case MACH_TYPE_MX21ADS: + case MACH_TYPE_PCA100: + case MACH_TYPE_MXT_TD60: + case MACH_TYPE_IMX27IPCAM: + uart_base = MX2X_UART1_BASE_ADDR; + break; + case MACH_TYPE_MX31LITE: + case MACH_TYPE_ARMADILLO5X0: + case MACH_TYPE_MX31MOBOARD: + case MACH_TYPE_QONG: + case MACH_TYPE_MX31_3DS: + case MACH_TYPE_PCM037: + case MACH_TYPE_MX31ADS: + case MACH_TYPE_MX35_3DS: + case MACH_TYPE_PCM043: + case MACH_TYPE_LILLY1131: + case MACH_TYPE_VPR200: + case MACH_TYPE_EUKREA_CPUIMX35SD: + uart_base = MX3X_UART1_BASE_ADDR; + break; + case MACH_TYPE_MAGX_ZN5: + uart_base = MX3X_UART2_BASE_ADDR; + break; + case MACH_TYPE_BUG: + uart_base = MX3X_UART5_BASE_ADDR; + break; + case MACH_TYPE_MX51_BABBAGE: + case MACH_TYPE_EUKREA_CPUIMX51SD: + case MACH_TYPE_MX51_3DS: + uart_base = MX51_UART1_BASE_ADDR; + break; + case MACH_TYPE_MX50_RDP: + uart_base = MX50_UART1_BASE_ADDR; + break; + case MACH_TYPE_MX53_EVK: + case MACH_TYPE_MX53_LOCO: + case MACH_TYPE_MX53_SMD: + case MACH_TYPE_MX53_ARD: + uart_base = MX53_UART1_BASE_ADDR; + break; + default: + break; + } +} + +#define arch_decomp_setup() __arch_decomp_setup(arch_id) +#define arch_decomp_wdog() + +#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */ diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c new file mode 100644 index 00000000000..074c3869626 --- /dev/null +++ b/arch/arm/mach-imx/iram_alloc.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/genalloc.h> +#include <mach/iram.h> + +static unsigned long iram_phys_base; +static void __iomem *iram_virt_base; +static struct gen_pool *iram_pool; + +static inline void __iomem *iram_phys_to_virt(unsigned long p) +{ + return iram_virt_base + (p - iram_phys_base); +} + +void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) +{ + if (!iram_pool) + return NULL; + + *dma_addr = gen_pool_alloc(iram_pool, size); + pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr); + if (!*dma_addr) + return NULL; + return iram_phys_to_virt(*dma_addr); +} +EXPORT_SYMBOL(iram_alloc); + +void iram_free(unsigned long addr, unsigned int size) +{ + if (!iram_pool) + return; + + gen_pool_free(iram_pool, addr, size); +} +EXPORT_SYMBOL(iram_free); + +int __init iram_init(unsigned long base, unsigned long size) +{ + iram_phys_base = base; + + iram_pool = gen_pool_create(PAGE_SHIFT, -1); + if (!iram_pool) + return -ENOMEM; + + gen_pool_add(iram_pool, base, size, -1); + iram_virt_base = ioremap(iram_phys_base, size); + if (!iram_virt_base) + return -EIO; + + pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base); + return 0; +} diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c new file mode 100644 index 00000000000..b6e11458e5a --- /dev/null +++ b/arch/arm/mach-imx/irq-common.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) BitBox Ltd 2010 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/irq.h> + +#include "irq-common.h" + +int imx_irq_set_priority(unsigned char irq, unsigned char prio) +{ + struct irq_chip_generic *gc; + struct mxc_extra_irq *exirq; + int ret; + + ret = -ENOSYS; + + gc = irq_get_chip_data(irq); + if (gc && gc->private) { + exirq = gc->private; + if (exirq->set_priority) + ret = exirq->set_priority(irq, prio); + } + + return ret; +} +EXPORT_SYMBOL(imx_irq_set_priority); + +int mxc_set_irq_fiq(unsigned int irq, unsigned int type) +{ + struct irq_chip_generic *gc; + struct mxc_extra_irq *exirq; + int ret; + + ret = -ENOSYS; + + gc = irq_get_chip_data(irq); + if (gc && gc->private) { + exirq = gc->private; + if (exirq->set_irq_fiq) + ret = exirq->set_irq_fiq(irq, type); + } + + return ret; +} +EXPORT_SYMBOL(mxc_set_irq_fiq); diff --git a/arch/arm/mach-imx/irq-common.h b/arch/arm/mach-imx/irq-common.h new file mode 100644 index 00000000000..6ccb3a14c69 --- /dev/null +++ b/arch/arm/mach-imx/irq-common.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) BitBox Ltd 2010 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __PLAT_MXC_IRQ_COMMON_H__ +#define __PLAT_MXC_IRQ_COMMON_H__ + +struct mxc_extra_irq +{ + int (*set_priority)(unsigned char irq, unsigned char prio); + int (*set_irq_fiq)(unsigned int irq, unsigned int type); +}; + +#endif diff --git a/arch/arm/mach-imx/ssi-fiq-ksym.c b/arch/arm/mach-imx/ssi-fiq-ksym.c new file mode 100644 index 00000000000..792090f9a03 --- /dev/null +++ b/arch/arm/mach-imx/ssi-fiq-ksym.c @@ -0,0 +1,20 @@ +/* + * Exported ksyms for the SSI FIQ handler + * + * Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> + +#include <linux/platform_data/asoc-imx-ssi.h> + +EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer); +EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer); +EXPORT_SYMBOL(imx_ssi_fiq_start); +EXPORT_SYMBOL(imx_ssi_fiq_end); +EXPORT_SYMBOL(imx_ssi_fiq_base); + diff --git a/arch/arm/mach-imx/ssi-fiq.S b/arch/arm/mach-imx/ssi-fiq.S new file mode 100644 index 00000000000..a8b93c5f29b --- /dev/null +++ b/arch/arm/mach-imx/ssi-fiq.S @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * r8 = bit 0-15: tx offset, bit 16-31: tx buffer size + * r9 = bit 0-15: rx offset, bit 16-31: rx buffer size + */ + +#define SSI_STX0 0x00 +#define SSI_SRX0 0x08 +#define SSI_SISR 0x14 +#define SSI_SIER 0x18 +#define SSI_SACNT 0x38 + +#define SSI_SACNT_AC97EN (1 << 0) + +#define SSI_SIER_TFE0_EN (1 << 0) +#define SSI_SISR_TFE0 (1 << 0) +#define SSI_SISR_RFF0 (1 << 2) +#define SSI_SIER_RFF0_EN (1 << 2) + + .text + .global imx_ssi_fiq_start + .global imx_ssi_fiq_end + .global imx_ssi_fiq_base + .global imx_ssi_fiq_rx_buffer + .global imx_ssi_fiq_tx_buffer + +/* + * imx_ssi_fiq_start is _intentionally_ not marked as a function symbol + * using ENDPROC(). imx_ssi_fiq_start and imx_ssi_fiq_end are used to + * mark the function body so that it can be copied to the FIQ vector in + * the vectors page. imx_ssi_fiq_start should only be called as the result + * of an FIQ: calling it directly will not work. + */ +imx_ssi_fiq_start: + ldr r12, .L_imx_ssi_fiq_base + + /* TX */ + ldr r13, .L_imx_ssi_fiq_tx_buffer + + /* shall we send? */ + ldr r11, [r12, #SSI_SIER] + tst r11, #SSI_SIER_TFE0_EN + beq 1f + + /* TX FIFO empty? */ + ldr r11, [r12, #SSI_SISR] + tst r11, #SSI_SISR_TFE0 + beq 1f + + mov r10, #0x10000 + sub r10, #1 + and r10, r10, r8 /* r10: current buffer offset */ + + add r13, r13, r10 + + ldrh r11, [r13] + strh r11, [r12, #SSI_STX0] + + ldrh r11, [r13, #2] + strh r11, [r12, #SSI_STX0] + + ldrh r11, [r13, #4] + strh r11, [r12, #SSI_STX0] + + ldrh r11, [r13, #6] + strh r11, [r12, #SSI_STX0] + + add r10, #8 + lsr r11, r8, #16 /* r11: buffer size */ + cmp r10, r11 + lslgt r8, r11, #16 + addle r8, #8 +1: + /* RX */ + + /* shall we receive? */ + ldr r11, [r12, #SSI_SIER] + tst r11, #SSI_SIER_RFF0_EN + beq 1f + + /* RX FIFO full? */ + ldr r11, [r12, #SSI_SISR] + tst r11, #SSI_SISR_RFF0 + beq 1f + + ldr r13, .L_imx_ssi_fiq_rx_buffer + + mov r10, #0x10000 + sub r10, #1 + and r10, r10, r9 /* r10: current buffer offset */ + + add r13, r13, r10 + + ldr r11, [r12, #SSI_SACNT] + tst r11, #SSI_SACNT_AC97EN + + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13] + + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13, #2] + + /* dummy read to skip slot 12 */ + ldrne r11, [r12, #SSI_SRX0] + + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13, #4] + + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13, #6] + + /* dummy read to skip slot 12 */ + ldrne r11, [r12, #SSI_SRX0] + + add r10, #8 + lsr r11, r9, #16 /* r11: buffer size */ + cmp r10, r11 + lslgt r9, r11, #16 + addle r9, #8 + +1: + @ return from FIQ + subs pc, lr, #4 + + .align +.L_imx_ssi_fiq_base: +imx_ssi_fiq_base: + .word 0x0 +.L_imx_ssi_fiq_rx_buffer: +imx_ssi_fiq_rx_buffer: + .word 0x0 +.L_imx_ssi_fiq_tx_buffer: +imx_ssi_fiq_tx_buffer: + .word 0x0 +.L_imx_ssi_fiq_end: +imx_ssi_fiq_end: + diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c new file mode 100644 index 00000000000..3da78cfc5a9 --- /dev/null +++ b/arch/arm/mach-imx/system.c @@ -0,0 +1,69 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/delay.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <asm/system_misc.h> +#include <asm/proc-fns.h> +#include <asm/mach-types.h> + +static void __iomem *wdog_base; + +/* + * Reset the system. It is called by machine_restart(). + */ +void mxc_restart(char mode, const char *cmd) +{ + unsigned int wcr_enable; + + if (cpu_is_mx1()) { + wcr_enable = (1 << 0); + } else { + struct clk *clk; + + clk = clk_get_sys("imx2-wdt.0", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); + wcr_enable = (1 << 2); + } + + /* Assert SRS signal */ + __raw_writew(wcr_enable, wdog_base); + + /* wait for reset to assert... */ + mdelay(500); + + printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); + + /* we'll take a jump through zero as a poor second */ + soft_restart(0); +} + +void mxc_arch_reset_init(void __iomem *base) +{ + wdog_base = base; +} diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c new file mode 100644 index 00000000000..a17abcf9832 --- /dev/null +++ b/arch/arm/mach-imx/time.c @@ -0,0 +1,325 @@ +/* + * linux/arch/arm/plat-mxc/time.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <mach/hardware.h> +#include <asm/sched_clock.h> +#include <asm/mach/time.h> +#include <mach/common.h> + +/* + * There are 2 versions of the timer hardware on Freescale MXC hardware. + * Version 1: MX1/MXL, MX21, MX27. + * Version 2: MX25, MX31, MX35, MX37, MX51 + */ + +/* defines common for all i.MX */ +#define MXC_TCTL 0x00 +#define MXC_TCTL_TEN (1 << 0) /* Enable module */ +#define MXC_TPRER 0x04 + +/* MX1, MX21, MX27 */ +#define MX1_2_TCTL_CLK_PCLK1 (1 << 1) +#define MX1_2_TCTL_IRQEN (1 << 4) +#define MX1_2_TCTL_FRR (1 << 8) +#define MX1_2_TCMP 0x08 +#define MX1_2_TCN 0x10 +#define MX1_2_TSTAT 0x14 + +/* MX21, MX27 */ +#define MX2_TSTAT_CAPT (1 << 1) +#define MX2_TSTAT_COMP (1 << 0) + +/* MX31, MX35, MX25, MX5 */ +#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ +#define V2_TCTL_CLK_IPG (1 << 6) +#define V2_TCTL_CLK_PER (2 << 6) +#define V2_TCTL_FRR (1 << 9) +#define V2_IR 0x0c +#define V2_TSTAT 0x08 +#define V2_TSTAT_OF1 (1 << 0) +#define V2_TCN 0x24 +#define V2_TCMP 0x10 + +#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) +#define timer_is_v2() (!timer_is_v1()) + +static struct clock_event_device clockevent_mxc; +static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +static void __iomem *timer_base; + +static inline void gpt_irq_disable(void) +{ + unsigned int tmp; + + if (timer_is_v2()) + __raw_writel(0, timer_base + V2_IR); + else { + tmp = __raw_readl(timer_base + MXC_TCTL); + __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL); + } +} + +static inline void gpt_irq_enable(void) +{ + if (timer_is_v2()) + __raw_writel(1<<0, timer_base + V2_IR); + else { + __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, + timer_base + MXC_TCTL); + } +} + +static void gpt_irq_acknowledge(void) +{ + if (timer_is_v1()) { + if (cpu_is_mx1()) + __raw_writel(0, timer_base + MX1_2_TSTAT); + else + __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, + timer_base + MX1_2_TSTAT); + } else if (timer_is_v2()) + __raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT); +} + +static void __iomem *sched_clock_reg; + +static u32 notrace mxc_read_sched_clock(void) +{ + return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; +} + +static int __init mxc_clocksource_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN); + + sched_clock_reg = reg; + + setup_sched_clock(mxc_read_sched_clock, 32, c); + return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32, + clocksource_mmio_readl_up); +} + +/* clock event */ + +static int mx1_2_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt; + + __raw_writel(tcmp, timer_base + MX1_2_TCMP); + + return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ? + -ETIME : 0; +} + +static int v2_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(timer_base + V2_TCN) + evt; + + __raw_writel(tcmp, timer_base + V2_TCMP); + + return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ? + -ETIME : 0; +} + +#ifdef DEBUG +static const char *clock_event_mode_label[] = { + [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", + [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", + [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", + [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED", + [CLOCK_EVT_MODE_RESUME] = "CLOCK_EVT_MODE_RESUME", +}; +#endif /* DEBUG */ + +static void mxc_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + /* + * The timer interrupt generation is disabled at least + * for enough time to call mxc_set_next_event() + */ + local_irq_save(flags); + + /* Disable interrupt in GPT module */ + gpt_irq_disable(); + + if (mode != clockevent_mode) { + /* Set event time into far-far future */ + if (timer_is_v2()) + __raw_writel(__raw_readl(timer_base + V2_TCN) - 3, + timer_base + V2_TCMP); + else + __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3, + timer_base + MX1_2_TCMP); + + /* Clear pending interrupt */ + gpt_irq_acknowledge(); + } + +#ifdef DEBUG + printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n", + clock_event_mode_label[clockevent_mode], + clock_event_mode_label[mode]); +#endif /* DEBUG */ + + /* Remember timer mode */ + clockevent_mode = mode; + local_irq_restore(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + printk(KERN_ERR"mxc_set_mode: Periodic mode is not " + "supported for i.MX\n"); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* + * Do not put overhead of interrupt enable/disable into + * mxc_set_next_event(), the core has about 4 minutes + * to call mxc_set_next_event() or shutdown clock after + * mode switching + */ + local_irq_save(flags); + gpt_irq_enable(); + local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_mxc; + uint32_t tstat; + + if (timer_is_v2()) + tstat = __raw_readl(timer_base + V2_TSTAT); + else + tstat = __raw_readl(timer_base + MX1_2_TSTAT); + + gpt_irq_acknowledge(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction mxc_timer_irq = { + .name = "i.MX Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = mxc_timer_interrupt, +}; + +static struct clock_event_device clockevent_mxc = { + .name = "mxc_timer1", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = mxc_set_mode, + .set_next_event = mx1_2_set_next_event, + .rating = 200, +}; + +static int __init mxc_clockevent_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + if (timer_is_v2()) + clockevent_mxc.set_next_event = v2_set_next_event; + + clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, + clockevent_mxc.shift); + clockevent_mxc.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_mxc); + clockevent_mxc.min_delta_ns = + clockevent_delta2ns(0xff, &clockevent_mxc); + + clockevent_mxc.cpumask = cpumask_of(0); + + clockevents_register_device(&clockevent_mxc); + + return 0; +} + +void __init mxc_timer_init(void __iomem *base, int irq) +{ + uint32_t tctl_val; + struct clk *timer_clk; + struct clk *timer_ipg_clk; + + timer_clk = clk_get_sys("imx-gpt.0", "per"); + if (IS_ERR(timer_clk)) { + pr_err("i.MX timer: unable to get clk\n"); + return; + } + + timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); + if (!IS_ERR(timer_ipg_clk)) + clk_prepare_enable(timer_ipg_clk); + + clk_prepare_enable(timer_clk); + + timer_base = base; + + /* + * Initialise to a known state (all timers off, and timing reset) + */ + + __raw_writel(0, timer_base + MXC_TCTL); + __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ + + if (timer_is_v2()) + tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; + else + tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; + + __raw_writel(tctl_val, timer_base + MXC_TCTL); + + /* init and register the timer to the framework */ + mxc_clocksource_init(timer_clk); + mxc_clockevent_init(timer_clk); + + /* Make irqs happen */ + setup_irq(irq, &mxc_timer_irq); +} diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c new file mode 100644 index 00000000000..3ed1adbc09f --- /dev/null +++ b/arch/arm/mach-imx/tzic.c @@ -0,0 +1,224 @@ +/* + * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/irqdomain.h> +#include <linux/of.h> + +#include <asm/mach/irq.h> +#include <asm/exception.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/irqs.h> + +#include "irq-common.h" + +/* + ***************************************** + * TZIC Registers * + ***************************************** + */ + +#define TZIC_INTCNTL 0x0000 /* Control register */ +#define TZIC_INTTYPE 0x0004 /* Controller Type register */ +#define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */ +#define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */ +#define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */ +#define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */ +#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */ +#define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */ +#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */ +#define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */ +#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */ +#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */ +#define TZIC_PND0 0x0D00 /* Pending Register 0 */ +#define TZIC_HIPND(i) (0x0D80+ ((i) << 2)) /* High Priority Pending Register */ +#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */ +#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */ +#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ + +void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ +static struct irq_domain *domain; + +#define TZIC_NUM_IRQS 128 + +#ifdef CONFIG_FIQ +static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) +{ + unsigned int index, mask, value; + + index = irq >> 5; + if (unlikely(index >= 4)) + return -EINVAL; + mask = 1U << (irq & 0x1F); + + value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask; + if (type) + value &= ~mask; + __raw_writel(value, tzic_base + TZIC_INTSEC0(index)); + + return 0; +} +#else +#define tzic_set_irq_fiq NULL +#endif + +#ifdef CONFIG_PM +static void tzic_irq_suspend(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + int idx = d->hwirq >> 5; + + __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); +} + +static void tzic_irq_resume(struct irq_data *d) +{ + int idx = d->hwirq >> 5; + + __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)), + tzic_base + TZIC_WAKEUP0(idx)); +} + +#else +#define tzic_irq_suspend NULL +#define tzic_irq_resume NULL +#endif + +static struct mxc_extra_irq tzic_extra_irq = { +#ifdef CONFIG_FIQ + .set_irq_fiq = tzic_set_irq_fiq, +#endif +}; + +static __init void tzic_init_gc(int idx, unsigned int irq_start) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base, + handle_level_irq); + gc->private = &tzic_extra_irq; + gc->wake_enabled = IRQ_MSK(32); + + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.irq_set_wake = irq_gc_set_wake; + ct->chip.irq_suspend = tzic_irq_suspend; + ct->chip.irq_resume = tzic_irq_resume; + ct->regs.disable = TZIC_ENCLEAR0(idx); + ct->regs.enable = TZIC_ENSET0(idx); + + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); +} + +asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) +{ + u32 stat; + int i, irqofs, handled; + + do { + handled = 0; + + for (i = 0; i < 4; i++) { + stat = __raw_readl(tzic_base + TZIC_HIPND(i)) & + __raw_readl(tzic_base + TZIC_INTSEC0(i)); + + while (stat) { + handled = 1; + irqofs = fls(stat) - 1; + handle_IRQ(irq_find_mapping(domain, + irqofs + i * 32), regs); + stat &= ~(1 << irqofs); + } + } + } while (handled); +} + +/* + * This function initializes the TZIC hardware and disables all the + * interrupts. It registers the interrupt enable and disable functions + * to the kernel for each interrupt source. + */ +void __init tzic_init_irq(void __iomem *irqbase) +{ + struct device_node *np; + int irq_base; + int i; + + tzic_base = irqbase; + /* put the TZIC into the reset value with + * all interrupts disabled + */ + i = __raw_readl(tzic_base + TZIC_INTCNTL); + + __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL); + __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK); + __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL); + + for (i = 0; i < 4; i++) + __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); + + /* disable all interrupts */ + for (i = 0; i < 4; i++) + __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); + + /* all IRQ no FIQ Warning :: No selection */ + + irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id()); + WARN_ON(irq_base < 0); + + np = of_find_compatible_node(NULL, NULL, "fsl,tzic"); + domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = 0; i < 4; i++, irq_base += 32) + tzic_init_gc(i, irq_base); + +#ifdef CONFIG_FIQ + /* Initialize FIQ */ + init_FIQ(FIQ_START); +#endif + + pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); +} + +/** + * tzic_enable_wake() - enable wakeup interrupt + * + * @return 0 if successful; non-zero otherwise + * + * This function provides an interrupt synchronization point that is required + * by tzic enabled platforms before entering imx specific low power modes (ie, + * those low power modes beyond the WAIT_CLOCKED basic ARM WFI only mode). + */ +int tzic_enable_wake(void) +{ + unsigned int i; + + __raw_writel(1, tzic_base + TZIC_DSMINT); + if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0)) + return -EAGAIN; + + for (i = 0; i < 4; i++) + __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)), + tzic_base + TZIC_WAKEUP0(i)); + + return 0; +} diff --git a/arch/arm/mach-imx/ulpi.c b/arch/arm/mach-imx/ulpi.c new file mode 100644 index 00000000000..d2963427184 --- /dev/null +++ b/arch/arm/mach-imx/ulpi.c @@ -0,0 +1,118 @@ +/* + * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * Copyright 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> + +#include <mach/ulpi.h> + +/* ULPIVIEW register bits */ +#define ULPIVW_WU (1 << 31) /* Wakeup */ +#define ULPIVW_RUN (1 << 30) /* read/write run */ +#define ULPIVW_WRITE (1 << 29) /* 0 = read 1 = write */ +#define ULPIVW_SS (1 << 27) /* SyncState */ +#define ULPIVW_PORT_MASK 0x07 /* Port field */ +#define ULPIVW_PORT_SHIFT 24 +#define ULPIVW_ADDR_MASK 0xff /* data address field */ +#define ULPIVW_ADDR_SHIFT 16 +#define ULPIVW_RDATA_MASK 0xff /* read data field */ +#define ULPIVW_RDATA_SHIFT 8 +#define ULPIVW_WDATA_MASK 0xff /* write data field */ +#define ULPIVW_WDATA_SHIFT 0 + +static int ulpi_poll(void __iomem *view, u32 bit) +{ + int timeout = 10000; + + while (timeout--) { + u32 data = __raw_readl(view); + + if (!(data & bit)) + return 0; + + cpu_relax(); + }; + + printk(KERN_WARNING "timeout polling for ULPI device\n"); + + return -ETIMEDOUT; +} + +static int ulpi_read(struct usb_phy *otg, u32 reg) +{ + int ret; + void __iomem *view = otg->io_priv; + + /* make sure interface is running */ + if (!(__raw_readl(view) & ULPIVW_SS)) { + __raw_writel(ULPIVW_WU, view); + + /* wait for wakeup */ + ret = ulpi_poll(view, ULPIVW_WU); + if (ret) + return ret; + } + + /* read the register */ + __raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view); + + /* wait for completion */ + ret = ulpi_poll(view, ULPIVW_RUN); + if (ret) + return ret; + + return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK; +} + +static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg) +{ + int ret; + void __iomem *view = otg->io_priv; + + /* make sure the interface is running */ + if (!(__raw_readl(view) & ULPIVW_SS)) { + __raw_writel(ULPIVW_WU, view); + /* wait for wakeup */ + ret = ulpi_poll(view, ULPIVW_WU); + if (ret) + return ret; + } + + __raw_writel((ULPIVW_RUN | ULPIVW_WRITE | + (reg << ULPIVW_ADDR_SHIFT) | + ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view); + + /* wait for completion */ + return ulpi_poll(view, ULPIVW_RUN); +} + +struct usb_phy_io_ops mxc_ulpi_access_ops = { + .read = ulpi_read, + .write = ulpi_write, +}; +EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops); + +struct usb_phy *imx_otg_ulpi_create(unsigned int flags) +{ + return otg_ulpi_create(&mxc_ulpi_access_ops, flags); +} |