diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-imx6q.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-imx6q.c | 93 |
1 files changed, 17 insertions, 76 deletions
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 90372a21087..d0cfb225ec9 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -11,11 +11,8 @@ */ #include <linux/clk.h> -#include <linux/clk-provider.h> #include <linux/clkdev.h> -#include <linux/clocksource.h> #include <linux/cpu.h> -#include <linux/delay.h> #include <linux/export.h> #include <linux/init.h> #include <linux/io.h> @@ -25,7 +22,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/phy.h> #include <linux/reboot.h> #include <linux/regmap.h> @@ -40,64 +37,6 @@ #include "cpuidle.h" #include "hardware.h" -static u32 chip_revision; - -int imx6q_revision(void) -{ - return chip_revision; -} - -static void __init imx6q_init_revision(void) -{ - u32 rev = imx_anatop_get_digprog(); - - switch (rev & 0xff) { - case 0: - chip_revision = IMX_CHIP_REVISION_1_0; - break; - case 1: - chip_revision = IMX_CHIP_REVISION_1_1; - break; - case 2: - chip_revision = IMX_CHIP_REVISION_1_2; - break; - default: - chip_revision = IMX_CHIP_REVISION_UNKNOWN; - } - - mxc_set_cpu_type(rev >> 16 & 0xff); -} - -static void imx6q_restart(enum reboot_mode mode, const char *cmd) -{ - struct device_node *np; - void __iomem *wdog_base; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt"); - wdog_base = of_iomap(np, 0); - if (!wdog_base) - goto soft; - - imx_src_prepare_restart(); - - /* enable wdog */ - writew_relaxed(1 << 2, wdog_base); - /* write twice to ensure the request will not get ignored */ - writew_relaxed(1 << 2, wdog_base); - - /* wait for reset to assert ... */ - mdelay(500); - - pr_err("Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); - -soft: - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -} - /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { @@ -192,9 +131,20 @@ static void __init imx6q_1588_init(void) static void __init imx6q_init_machine(void) { + struct device *parent; + + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", + imx_get_soc_revision()); + + mxc_arch_reset_init_dt(); + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + imx6q_enet_phy_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); imx_anatop_init(); imx6q_pm_init(); @@ -226,7 +176,7 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ) - if (opp_disable(cpu_dev, 1200000000)) + if (dev_pm_opp_disable(cpu_dev, 1200000000)) pr_warn("failed to disable 1.2 GHz OPP\n"); put_node: @@ -269,7 +219,7 @@ static void __init imx6q_init_late(void) * WAIT mode is broken on TO 1.0 and 1.1, so there is no point * to run cpuidle on them. */ - if (imx6q_revision() > IMX_CHIP_REVISION_1_1) + if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) imx6q_cpuidle_init(); if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) { @@ -286,21 +236,13 @@ static void __init imx6q_map_io(void) static void __init imx6q_init_irq(void) { - imx6q_init_revision(); + imx_init_revision_from_anatop(); imx_init_l2cache(); imx_src_init(); imx_gpc_init(); irqchip_init(); } -static void __init imx6q_timer_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); - imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", - imx6q_revision()); -} - static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6dl", "fsl,imx6q", @@ -311,9 +253,8 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, - .init_time = imx6q_timer_init, .init_machine = imx6q_init_machine, .init_late = imx6q_init_late, .dt_compat = imx6q_dt_compat, - .restart = imx6q_restart, + .restart = mxc_restart, MACHINE_END |