diff options
Diffstat (limited to 'arch/arm/mach-ep93xx')
32 files changed, 1093 insertions, 826 deletions
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 97a249395b5..bec570ae649 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -2,6 +2,12 @@ if ARCH_EP93XX menu "Cirrus EP93xx Implementation Options" +config EP93XX_SOC_COMMON + bool + default y + select SOC_BUS + select LEDS_GPIO_REGISTER + config CRUNCH bool "Support for MaverickCrunch" help @@ -189,20 +195,6 @@ config MACH_VISION_EP9307 Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM. -choice - prompt "Select a UART for early kernel messages" - -config EP93XX_EARLY_UART1 - bool "UART1" - -config EP93XX_EARLY_UART2 - bool "UART2" - -config EP93XX_EARLY_UART3 - bool "UART3" - -endchoice - endmenu endif diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 574209d9e24..0dc51f9462d 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -8,6 +8,9 @@ obj- := obj-$(CONFIG_EP93XX_DMA) += dma.o +obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o +AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 + obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 681e939407d..bda6c3a5c92 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -13,13 +13,14 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/sizes.h> #include <mach/hardware.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" static struct ep93xx_eth_data __initdata adssphere_eth_data = { .phy_id = 1, @@ -37,8 +38,8 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = adssphere_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index ca4de710509..39ef3b61391 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -25,6 +25,7 @@ #include <asm/div64.h> +#include "soc.h" struct clk { struct clk *parent; @@ -211,7 +212,7 @@ static struct clk_lookup clocks[] = { INIT_CK(NULL, "hclk", &clk_h), INIT_CK(NULL, "apb_pclk", &clk_p), INIT_CK(NULL, "pll2", &clk_pll2), - INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), + INIT_CK("ohci-platform", NULL, &clk_usb_host), INIT_CK("ep93xx-keypad", NULL, &clk_keypad), INIT_CK("ep93xx-fb", NULL, &clk_video), INIT_CK("ep93xx-spi.0", NULL, &clk_spi), diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 24203f9a679..0e571f1749d 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -21,6 +21,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/dma-mapping.h> +#include <linux/sys_soc.h> #include <linux/timex.h> #include <linux/irq.h> #include <linux/io.h> @@ -34,18 +35,21 @@ #include <linux/i2c-gpio.h> #include <linux/spi/spi.h> #include <linux/export.h> +#include <linux/irqchip/arm-vic.h> +#include <linux/reboot.h> +#include <linux/usb/ohci_pdriver.h> #include <mach/hardware.h> -#include <mach/fb.h> -#include <mach/ep93xx_keypad.h> -#include <mach/ep93xx_spi.h> +#include <linux/platform_data/video-ep93xx.h> +#include <linux/platform_data/keypad-ep93xx.h> +#include <linux/platform_data/spi-ep93xx.h> #include <mach/gpio-ep93xx.h> +#include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/hardware/vic.h> - +#include "soc.h" /************************************************************************* * Static I/O mappings that are needed for all EP93xx platforms @@ -113,7 +117,7 @@ void __init ep93xx_map_io(void) #define EP93XX_TIMER4_CLOCK 983040 #define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) -#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ) static unsigned int last_jiffy_time; @@ -135,15 +139,33 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) static struct irqaction ep93xx_timer_irq = { .name = "ep93xx timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = ep93xx_timer_interrupt, }; -static void __init ep93xx_timer_init(void) +static u32 ep93xx_gettimeoffset(void) +{ + int offset; + + offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time; + + /* + * Timer 4 is based on a 983.04 kHz reference clock, + * so dividing by 983040 gives the fraction of a second, + * so dividing by 0.983040 converts to uS. + * Refactor the calculation to avoid overflow. + * Finally, multiply by 1000 to give nS. + */ + return (offset + (53 * offset / 3072)) * 1000; +} + +void __init ep93xx_timer_init(void) { u32 tmode = EP93XX_TIMER123_CONTROL_MODE | EP93XX_TIMER123_CONTROL_CLKSEL; + arch_gettimeoffset = ep93xx_gettimeoffset; + /* Enable periodic HZ timer. */ __raw_writel(tmode, EP93XX_TIMER1_CONTROL); __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD); @@ -157,21 +179,6 @@ static void __init ep93xx_timer_init(void) setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq); } -static unsigned long ep93xx_gettimeoffset(void) -{ - int offset; - - offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time; - - /* Calculate (1000000 / 983040) * offset. */ - return offset + (53 * offset / 3072); -} - -struct sys_timer ep93xx_timer = { - .init = ep93xx_timer_init, - .offset = ep93xx_gettimeoffset, -}; - /************************************************************************* * EP93xx IRQ handling @@ -204,7 +211,6 @@ void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg) spin_unlock_irqrestore(&syscon_swlock, flags); } -EXPORT_SYMBOL(ep93xx_syscon_swlocked_write); void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) { @@ -221,7 +227,6 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) spin_unlock_irqrestore(&syscon_swlock, flags); } -EXPORT_SYMBOL(ep93xx_devcfg_set_clear); /** * ep93xx_chip_revision() - returns the EP93xx chip revision @@ -237,16 +242,13 @@ unsigned int ep93xx_chip_revision(void) v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT; return v; } +EXPORT_SYMBOL_GPL(ep93xx_chip_revision); /************************************************************************* * EP93xx GPIO *************************************************************************/ static struct resource ep93xx_gpio_resource[] = { - { - .start = EP93XX_GPIO_PHYS_BASE, - .end = EP93XX_GPIO_PHYS_BASE + 0xcc - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc), }; static struct platform_device ep93xx_gpio_device = { @@ -279,55 +281,17 @@ static struct amba_pl010_data ep93xx_uart_data = { .set_mctrl = ep93xx_uart_set_mctrl, }; -static struct amba_device uart1_device = { - .dev = { - .init_name = "apb:uart1", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART1_PHYS_BASE, - .end = EP93XX_UART1_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART1, NO_IRQ }, - .periphid = 0x00041010, -}; +static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE, + { IRQ_EP93XX_UART1 }, &ep93xx_uart_data); -static struct amba_device uart2_device = { - .dev = { - .init_name = "apb:uart2", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART2_PHYS_BASE, - .end = EP93XX_UART2_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART2, NO_IRQ }, - .periphid = 0x00041010, -}; - -static struct amba_device uart3_device = { - .dev = { - .init_name = "apb:uart3", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART3_PHYS_BASE, - .end = EP93XX_UART3_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART3, NO_IRQ }, - .periphid = 0x00041010, -}; +static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE, + { IRQ_EP93XX_UART2 }, NULL); +static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, + { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); static struct resource ep93xx_rtc_resource[] = { - { - .start = EP93XX_RTC_PHYS_BASE, - .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c), }; static struct platform_device ep93xx_rtc_device = { @@ -337,33 +301,53 @@ static struct platform_device ep93xx_rtc_device = { .resource = ep93xx_rtc_resource, }; +/************************************************************************* + * EP93xx OHCI USB Host + *************************************************************************/ + +static struct clk *ep93xx_ohci_host_clock; + +static int ep93xx_ohci_power_on(struct platform_device *pdev) +{ + if (!ep93xx_ohci_host_clock) { + ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(ep93xx_ohci_host_clock)) + return PTR_ERR(ep93xx_ohci_host_clock); + } + + return clk_enable(ep93xx_ohci_host_clock); +} + +static void ep93xx_ohci_power_off(struct platform_device *pdev) +{ + clk_disable(ep93xx_ohci_host_clock); +} + +static struct usb_ohci_pdata ep93xx_ohci_pdata = { + .power_on = ep93xx_ohci_power_on, + .power_off = ep93xx_ohci_power_off, + .power_suspend = ep93xx_ohci_power_off, +}; static struct resource ep93xx_ohci_resources[] = { - [0] = { - .start = EP93XX_USB_PHYS_BASE, - .end = EP93XX_USB_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EP93XX_USB, - .end = IRQ_EP93XX_USB, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000), + DEFINE_RES_IRQ(IRQ_EP93XX_USB), }; +static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32); static struct platform_device ep93xx_ohci_device = { - .name = "ep93xx-ohci", + .name = "ohci-platform", .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), + .resource = ep93xx_ohci_resources, .dev = { - .dma_mask = &ep93xx_ohci_device.dev.coherent_dma_mask, + .dma_mask = &ep93xx_ohci_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &ep93xx_ohci_pdata, }, - .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), - .resource = ep93xx_ohci_resources, }; - /************************************************************************* * EP93xx physmap'ed flash *************************************************************************/ @@ -407,15 +391,8 @@ void __init ep93xx_register_flash(unsigned int width, static struct ep93xx_eth_data ep93xx_eth_data; static struct resource ep93xx_eth_resource[] = { - { - .start = EP93XX_ETHERNET_PHYS_BASE, - .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_EP93XX_ETHERNET, - .end = IRQ_EP93XX_ETHERNET, - .flags = IORESOURCE_IRQ, - } + DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000), + DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET), }; static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32); @@ -496,16 +473,8 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, static struct ep93xx_spi_info ep93xx_spi_master_data; static struct resource ep93xx_spi_resources[] = { - { - .start = EP93XX_SPI_PHYS_BASE, - .end = EP93XX_SPI_PHYS_BASE + 0x18 - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_EP93XX_SSP, - .end = IRQ_EP93XX_SSP, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18), + DEFINE_RES_IRQ(IRQ_EP93XX_SSP), }; static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); @@ -548,7 +517,7 @@ void __init ep93xx_register_spi(struct ep93xx_spi_info *info, /************************************************************************* * EP93xx LEDs *************************************************************************/ -static struct gpio_led ep93xx_led_pins[] = { +static const struct gpio_led ep93xx_led_pins[] __initconst = { { .name = "platform:grled", .gpio = EP93XX_GPIO_LINE_GRLED, @@ -558,29 +527,16 @@ static struct gpio_led ep93xx_led_pins[] = { }, }; -static struct gpio_led_platform_data ep93xx_led_data = { +static const struct gpio_led_platform_data ep93xx_led_data __initconst = { .num_leds = ARRAY_SIZE(ep93xx_led_pins), .leds = ep93xx_led_pins, }; -static struct platform_device ep93xx_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &ep93xx_led_data, - }, -}; - - /************************************************************************* * EP93xx pwm peripheral handling *************************************************************************/ static struct resource ep93xx_pwm0_resource[] = { - { - .start = EP93XX_PWM_PHYS_BASE, - .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10), }; static struct platform_device ep93xx_pwm0_device = { @@ -591,11 +547,7 @@ static struct platform_device ep93xx_pwm0_device = { }; static struct resource ep93xx_pwm1_resource[] = { - { - .start = EP93XX_PWM_PHYS_BASE + 0x20, - .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10), }; static struct platform_device ep93xx_pwm1_device = { @@ -663,11 +615,7 @@ EXPORT_SYMBOL(ep93xx_pwm_release_gpio); static struct ep93xxfb_mach_info ep93xxfb_data; static struct resource ep93xx_fb_resource[] = { - { - .start = EP93XX_RASTER_PHYS_BASE, - .end = EP93XX_RASTER_PHYS_BASE + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800), }; static struct platform_device ep93xx_fb_device = { @@ -682,9 +630,19 @@ static struct platform_device ep93xx_fb_device = { .resource = ep93xx_fb_resource, }; +/* The backlight use a single register in the framebuffer's register space */ +#define EP93XX_RASTER_REG_BRIGHTNESS 0x20 + +static struct resource ep93xx_bl_resources[] = { + DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE + + EP93XX_RASTER_REG_BRIGHTNESS, 0x04), +}; + static struct platform_device ep93xx_bl_device = { .name = "ep93xx-bl", .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_bl_resources), + .resource = ep93xx_bl_resources, }; /** @@ -705,15 +663,8 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) static struct ep93xx_keypad_platform_data ep93xx_keypad_data; static struct resource ep93xx_keypad_resource[] = { - { - .start = EP93XX_KEY_MATRIX_PHYS_BASE, - .end = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_EP93XX_KEY, - .end = IRQ_EP93XX_KEY, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c), + DEFINE_RES_IRQ(IRQ_EP93XX_KEY), }; static struct platform_device ep93xx_keypad_device = { @@ -759,7 +710,7 @@ int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) fail_gpio_d: gpio_free(EP93XX_GPIO_LINE_C(i)); fail_gpio_c: - for ( ; i >= 0; --i) { + for (--i; i >= 0; --i) { gpio_free(EP93XX_GPIO_LINE_C(i)); gpio_free(EP93XX_GPIO_LINE_D(i)); } @@ -786,11 +737,7 @@ EXPORT_SYMBOL(ep93xx_keypad_release_gpio); * EP93xx I2S audio peripheral handling *************************************************************************/ static struct resource ep93xx_i2s_resource[] = { - { - .start = EP93XX_I2S_PHYS_BASE, - .end = EP93XX_I2S_PHYS_BASE + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), }; static struct platform_device ep93xx_i2s_device = { @@ -817,23 +764,12 @@ void __init ep93xx_register_i2s(void) #define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \ EP93XX_SYSCON_I2SCLKDIV_SPOL) -int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config) +int ep93xx_i2s_acquire(void) { unsigned val; - /* Sanity check */ - if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK) - return -EINVAL; - if (i2s_config & ~EP93XX_I2SCLKDIV_MASK) - return -EINVAL; - - /* Must have only one of I2SONSSP/I2SONAC97 set */ - if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) == - (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97)) - return -EINVAL; - - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); - ep93xx_devcfg_set_bits(i2s_pins); + ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97, + EP93XX_SYSCON_DEVCFG_I2S_MASK); /* * This is potentially racy with the clock api for i2s_mclk, sclk and @@ -843,7 +779,7 @@ int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config) */ val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); val &= ~EP93XX_I2SCLKDIV_MASK; - val |= i2s_config; + val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL; ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV); return 0; @@ -860,16 +796,8 @@ EXPORT_SYMBOL(ep93xx_i2s_release); * EP93xx AC97 audio peripheral handling *************************************************************************/ static struct resource ep93xx_ac97_resources[] = { - { - .start = EP93XX_AAC_PHYS_BASE, - .end = EP93XX_AAC_PHYS_BASE + 0xac - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_EP93XX_AACINTR, - .end = IRQ_EP93XX_AACINTR, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac), + DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR), }; static struct platform_device ep93xx_ac97_device = { @@ -890,11 +818,230 @@ void __init ep93xx_register_ac97(void) platform_device_register(&ep93xx_pcm_device); } -void __init ep93xx_init_devices(void) +/************************************************************************* + * EP93xx Watchdog + *************************************************************************/ +static struct resource ep93xx_wdt_resources[] = { + DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08), +}; + +static struct platform_device ep93xx_wdt_device = { + .name = "ep93xx-wdt", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_wdt_resources), + .resource = ep93xx_wdt_resources, +}; + +/************************************************************************* + * EP93xx IDE + *************************************************************************/ +static struct resource ep93xx_ide_resources[] = { + DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38), + DEFINE_RES_IRQ(IRQ_EP93XX_EXT3), +}; + +static struct platform_device ep93xx_ide_device = { + .name = "ep93xx-ide", + .id = -1, + .dev = { + .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(ep93xx_ide_resources), + .resource = ep93xx_ide_resources, +}; + +void __init ep93xx_register_ide(void) +{ + platform_device_register(&ep93xx_ide_device); +} + +int ep93xx_ide_acquire_gpio(struct platform_device *pdev) +{ + int err; + int i; + + err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev)); + if (err) + return err; + err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev)); + if (err) + goto fail_egpio15; + for (i = 2; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_e; + } + for (i = 4; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_g; + } + for (i = 0; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_h; + } + + /* GPIO ports E[7:2], G[7:4] and H used by IDE */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); + return 0; + +fail_gpio_h: + for (--i; i >= 0; --i) + gpio_free(EP93XX_GPIO_LINE_H(i)); + i = 8; +fail_gpio_g: + for (--i; i >= 4; --i) + gpio_free(EP93XX_GPIO_LINE_G(i)); + i = 8; +fail_gpio_e: + for (--i; i >= 2; --i) + gpio_free(EP93XX_GPIO_LINE_E(i)); + gpio_free(EP93XX_GPIO_LINE_EGPIO15); +fail_egpio15: + gpio_free(EP93XX_GPIO_LINE_EGPIO2); + return err; +} +EXPORT_SYMBOL(ep93xx_ide_acquire_gpio); + +void ep93xx_ide_release_gpio(struct platform_device *pdev) { + int i; + + for (i = 2; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_E(i)); + for (i = 4; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_G(i)); + for (i = 0; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_H(i)); + gpio_free(EP93XX_GPIO_LINE_EGPIO15); + gpio_free(EP93XX_GPIO_LINE_EGPIO2); + + + /* GPIO ports E[7:2], G[7:4] and H used by GPIO */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); +} +EXPORT_SYMBOL(ep93xx_ide_release_gpio); + +/************************************************************************* + * EP93xx Security peripheral + *************************************************************************/ + +/* + * The Maverick Key is 256 bits of micro fuses blown at the factory during + * manufacturing to uniquely identify a part. + * + * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key + */ +#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x)) +#define EP93XX_SECURITY_SECFLG EP93XX_SECURITY_REG(0x2400) +#define EP93XX_SECURITY_FUSEFLG EP93XX_SECURITY_REG(0x2410) +#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440) +#define EP93XX_SECURITY_UNIQCHK EP93XX_SECURITY_REG(0x2450) +#define EP93XX_SECURITY_UNIQVAL EP93XX_SECURITY_REG(0x2460) +#define EP93XX_SECURITY_SECID1 EP93XX_SECURITY_REG(0x2500) +#define EP93XX_SECURITY_SECID2 EP93XX_SECURITY_REG(0x2504) +#define EP93XX_SECURITY_SECCHK1 EP93XX_SECURITY_REG(0x2520) +#define EP93XX_SECURITY_SECCHK2 EP93XX_SECURITY_REG(0x2524) +#define EP93XX_SECURITY_UNIQID2 EP93XX_SECURITY_REG(0x2700) +#define EP93XX_SECURITY_UNIQID3 EP93XX_SECURITY_REG(0x2704) +#define EP93XX_SECURITY_UNIQID4 EP93XX_SECURITY_REG(0x2708) +#define EP93XX_SECURITY_UNIQID5 EP93XX_SECURITY_REG(0x270c) + +static char ep93xx_soc_id[33]; + +static const char __init *ep93xx_get_soc_id(void) +{ + unsigned int id, id2, id3, id4, id5; + + if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1) + return "bad Hamming code"; + + id = __raw_readl(EP93XX_SECURITY_UNIQID); + id2 = __raw_readl(EP93XX_SECURITY_UNIQID2); + id3 = __raw_readl(EP93XX_SECURITY_UNIQID3); + id4 = __raw_readl(EP93XX_SECURITY_UNIQID4); + id5 = __raw_readl(EP93XX_SECURITY_UNIQID5); + + if (id != id2) + return "invalid"; + + snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id), + "%08x%08x%08x%08x", id2, id3, id4, id5); + + return ep93xx_soc_id; +} + +static const char __init *ep93xx_get_soc_rev(void) +{ + int rev = ep93xx_chip_revision(); + + switch (rev) { + case EP93XX_CHIP_REV_D0: + return "D0"; + case EP93XX_CHIP_REV_D1: + return "D1"; + case EP93XX_CHIP_REV_E0: + return "E0"; + case EP93XX_CHIP_REV_E1: + return "E1"; + case EP93XX_CHIP_REV_E2: + return "E2"; + default: + return "unknown"; + } +} + +static const char __init *ep93xx_get_machine_name(void) +{ + return kasprintf(GFP_KERNEL,"%s", machine_desc->name); +} + +static struct device __init *ep93xx_init_soc(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return NULL; + + soc_dev_attr->machine = ep93xx_get_machine_name(); + soc_dev_attr->family = "Cirrus Logic EP93xx"; + soc_dev_attr->revision = ep93xx_get_soc_rev(); + soc_dev_attr->soc_id = ep93xx_get_soc_id(); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->machine); + kfree(soc_dev_attr); + return NULL; + } + + return soc_device_to_device(soc_dev); +} + +struct device __init *ep93xx_init_devices(void) +{ + struct device *parent; + /* Disallow access to MaverickCrunch initially */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); + /* Default all ports to GPIO */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | + EP93XX_SYSCON_DEVCFG_GONK | + EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); + + parent = ep93xx_init_soc(); + /* Get the GPIO working early, other devices need it */ platform_device_register(&ep93xx_gpio_device); @@ -904,10 +1051,14 @@ void __init ep93xx_init_devices(void) platform_device_register(&ep93xx_rtc_device); platform_device_register(&ep93xx_ohci_device); - platform_device_register(&ep93xx_leds); + platform_device_register(&ep93xx_wdt_device); + + gpio_led_register_device(-1, &ep93xx_led_data); + + return parent; } -void ep93xx_restart(char mode, const char *cmd) +void ep93xx_restart(enum reboot_mode mode, const char *cmd) { /* * Set then clear the SWRST bit to initiate a software reset @@ -918,3 +1069,8 @@ void ep93xx_restart(char mode, const char *cmd) while (1) ; } + +void __init ep93xx_init_late(void) +{ + crunch_init(); +} diff --git a/arch/arm/mach-ep93xx/crunch-bits.S b/arch/arm/mach-ep93xx/crunch-bits.S new file mode 100644 index 00000000000..e96923a3017 --- /dev/null +++ b/arch/arm/mach-ep93xx/crunch-bits.S @@ -0,0 +1,313 @@ +/* + * arch/arm/kernel/crunch-bits.S + * Cirrus MaverickCrunch context switching and handling + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * Shamelessly stolen from the iWMMXt code by Nicolas Pitre, which is + * Copyright (c) 2003-2004, MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/ptrace.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> +#include <asm/assembler.h> +#include <mach/ep93xx-regs.h> + +/* + * We can't use hex constants here due to a bug in gas. + */ +#define CRUNCH_MVDX0 0 +#define CRUNCH_MVDX1 8 +#define CRUNCH_MVDX2 16 +#define CRUNCH_MVDX3 24 +#define CRUNCH_MVDX4 32 +#define CRUNCH_MVDX5 40 +#define CRUNCH_MVDX6 48 +#define CRUNCH_MVDX7 56 +#define CRUNCH_MVDX8 64 +#define CRUNCH_MVDX9 72 +#define CRUNCH_MVDX10 80 +#define CRUNCH_MVDX11 88 +#define CRUNCH_MVDX12 96 +#define CRUNCH_MVDX13 104 +#define CRUNCH_MVDX14 112 +#define CRUNCH_MVDX15 120 +#define CRUNCH_MVAX0L 128 +#define CRUNCH_MVAX0M 132 +#define CRUNCH_MVAX0H 136 +#define CRUNCH_MVAX1L 140 +#define CRUNCH_MVAX1M 144 +#define CRUNCH_MVAX1H 148 +#define CRUNCH_MVAX2L 152 +#define CRUNCH_MVAX2M 156 +#define CRUNCH_MVAX2H 160 +#define CRUNCH_MVAX3L 164 +#define CRUNCH_MVAX3M 168 +#define CRUNCH_MVAX3H 172 +#define CRUNCH_DSPSC 176 + +#define CRUNCH_SIZE 184 + + .text + +/* + * Lazy switching of crunch coprocessor context + * + * r10 = struct thread_info pointer + * r9 = ret_from_exception + * lr = undefined instr exit + * + * called from prefetch exception handler with interrupts enabled + */ +ENTRY(crunch_task_enable) + inc_preempt_count r10, r3 + + ldr r8, =(EP93XX_APB_VIRT_BASE + 0x00130000) @ syscon addr + + ldr r1, [r8, #0x80] + tst r1, #0x00800000 @ access to crunch enabled? + bne 2f @ if so no business here + mov r3, #0xaa @ unlock syscon swlock + str r3, [r8, #0xc0] + orr r1, r1, #0x00800000 @ enable access to crunch + str r1, [r8, #0x80] + + ldr r3, =crunch_owner + add r0, r10, #TI_CRUNCH_STATE @ get task crunch save area + ldr r2, [sp, #60] @ current task pc value + ldr r1, [r3] @ get current crunch owner + str r0, [r3] @ this task now owns crunch + sub r2, r2, #4 @ adjust pc back + str r2, [sp, #60] + + ldr r2, [r8, #0x80] + mov r2, r2 @ flush out enable (@@@) + + teq r1, #0 @ test for last ownership + mov lr, r9 @ normal exit from exception + beq crunch_load @ no owner, skip save + +crunch_save: + cfstr64 mvdx0, [r1, #CRUNCH_MVDX0] @ save 64b registers + cfstr64 mvdx1, [r1, #CRUNCH_MVDX1] + cfstr64 mvdx2, [r1, #CRUNCH_MVDX2] + cfstr64 mvdx3, [r1, #CRUNCH_MVDX3] + cfstr64 mvdx4, [r1, #CRUNCH_MVDX4] + cfstr64 mvdx5, [r1, #CRUNCH_MVDX5] + cfstr64 mvdx6, [r1, #CRUNCH_MVDX6] + cfstr64 mvdx7, [r1, #CRUNCH_MVDX7] + cfstr64 mvdx8, [r1, #CRUNCH_MVDX8] + cfstr64 mvdx9, [r1, #CRUNCH_MVDX9] + cfstr64 mvdx10, [r1, #CRUNCH_MVDX10] + cfstr64 mvdx11, [r1, #CRUNCH_MVDX11] + cfstr64 mvdx12, [r1, #CRUNCH_MVDX12] + cfstr64 mvdx13, [r1, #CRUNCH_MVDX13] + cfstr64 mvdx14, [r1, #CRUNCH_MVDX14] + cfstr64 mvdx15, [r1, #CRUNCH_MVDX15] + +#ifdef __ARMEB__ +#error fix me for ARMEB +#endif + + cfmv32al mvfx0, mvax0 @ save 72b accumulators + cfstr32 mvfx0, [r1, #CRUNCH_MVAX0L] + cfmv32am mvfx0, mvax0 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX0M] + cfmv32ah mvfx0, mvax0 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX0H] + cfmv32al mvfx0, mvax1 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX1L] + cfmv32am mvfx0, mvax1 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX1M] + cfmv32ah mvfx0, mvax1 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX1H] + cfmv32al mvfx0, mvax2 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX2L] + cfmv32am mvfx0, mvax2 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX2M] + cfmv32ah mvfx0, mvax2 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX2H] + cfmv32al mvfx0, mvax3 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX3L] + cfmv32am mvfx0, mvax3 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX3M] + cfmv32ah mvfx0, mvax3 + cfstr32 mvfx0, [r1, #CRUNCH_MVAX3H] + + cfmv32sc mvdx0, dspsc @ save status word + cfstr64 mvdx0, [r1, #CRUNCH_DSPSC] + + teq r0, #0 @ anything to load? + cfldr64eq mvdx0, [r1, #CRUNCH_MVDX0] @ mvdx0 was clobbered + beq 1f + +crunch_load: + cfldr64 mvdx0, [r0, #CRUNCH_DSPSC] @ load status word + cfmvsc32 dspsc, mvdx0 + + cfldr32 mvfx0, [r0, #CRUNCH_MVAX0L] @ load 72b accumulators + cfmval32 mvax0, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX0M] + cfmvam32 mvax0, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX0H] + cfmvah32 mvax0, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX1L] + cfmval32 mvax1, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX1M] + cfmvam32 mvax1, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX1H] + cfmvah32 mvax1, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX2L] + cfmval32 mvax2, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX2M] + cfmvam32 mvax2, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX2H] + cfmvah32 mvax2, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX3L] + cfmval32 mvax3, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX3M] + cfmvam32 mvax3, mvfx0 + cfldr32 mvfx0, [r0, #CRUNCH_MVAX3H] + cfmvah32 mvax3, mvfx0 + + cfldr64 mvdx0, [r0, #CRUNCH_MVDX0] @ load 64b registers + cfldr64 mvdx1, [r0, #CRUNCH_MVDX1] + cfldr64 mvdx2, [r0, #CRUNCH_MVDX2] + cfldr64 mvdx3, [r0, #CRUNCH_MVDX3] + cfldr64 mvdx4, [r0, #CRUNCH_MVDX4] + cfldr64 mvdx5, [r0, #CRUNCH_MVDX5] + cfldr64 mvdx6, [r0, #CRUNCH_MVDX6] + cfldr64 mvdx7, [r0, #CRUNCH_MVDX7] + cfldr64 mvdx8, [r0, #CRUNCH_MVDX8] + cfldr64 mvdx9, [r0, #CRUNCH_MVDX9] + cfldr64 mvdx10, [r0, #CRUNCH_MVDX10] + cfldr64 mvdx11, [r0, #CRUNCH_MVDX11] + cfldr64 mvdx12, [r0, #CRUNCH_MVDX12] + cfldr64 mvdx13, [r0, #CRUNCH_MVDX13] + cfldr64 mvdx14, [r0, #CRUNCH_MVDX14] + cfldr64 mvdx15, [r0, #CRUNCH_MVDX15] + +1: +#ifdef CONFIG_PREEMPT_COUNT + get_thread_info r10 +#endif +2: dec_preempt_count r10, r3 + mov pc, lr + +/* + * Back up crunch regs to save area and disable access to them + * (mainly for gdb or sleep mode usage) + * + * r0 = struct thread_info pointer of target task or NULL for any + */ +ENTRY(crunch_task_disable) + stmfd sp!, {r4, r5, lr} + + mrs ip, cpsr + orr r2, ip, #PSR_I_BIT @ disable interrupts + msr cpsr_c, r2 + + ldr r4, =(EP93XX_APB_VIRT_BASE + 0x00130000) @ syscon addr + + ldr r3, =crunch_owner + add r2, r0, #TI_CRUNCH_STATE @ get task crunch save area + ldr r1, [r3] @ get current crunch owner + teq r1, #0 @ any current owner? + beq 1f @ no: quit + teq r0, #0 @ any owner? + teqne r1, r2 @ or specified one? + bne 1f @ no: quit + + ldr r5, [r4, #0x80] @ enable access to crunch + mov r2, #0xaa + str r2, [r4, #0xc0] + orr r5, r5, #0x00800000 + str r5, [r4, #0x80] + + mov r0, #0 @ nothing to load + str r0, [r3] @ no more current owner + ldr r2, [r4, #0x80] @ flush out enable (@@@) + mov r2, r2 + bl crunch_save + + mov r2, #0xaa @ disable access to crunch + str r2, [r4, #0xc0] + bic r5, r5, #0x00800000 + str r5, [r4, #0x80] + ldr r5, [r4, #0x80] @ flush out enable (@@@) + mov r5, r5 + +1: msr cpsr_c, ip @ restore interrupt mode + ldmfd sp!, {r4, r5, pc} + +/* + * Copy crunch state to given memory address + * + * r0 = struct thread_info pointer of target task + * r1 = memory address where to store crunch state + * + * this is called mainly in the creation of signal stack frames + */ +ENTRY(crunch_task_copy) + mrs ip, cpsr + orr r2, ip, #PSR_I_BIT @ disable interrupts + msr cpsr_c, r2 + + ldr r3, =crunch_owner + add r2, r0, #TI_CRUNCH_STATE @ get task crunch save area + ldr r3, [r3] @ get current crunch owner + teq r2, r3 @ does this task own it... + beq 1f + + @ current crunch values are in the task save area + msr cpsr_c, ip @ restore interrupt mode + mov r0, r1 + mov r1, r2 + mov r2, #CRUNCH_SIZE + b memcpy + +1: @ this task owns crunch regs -- grab a copy from there + mov r0, #0 @ nothing to load + mov r3, lr @ preserve return address + bl crunch_save + msr cpsr_c, ip @ restore interrupt mode + mov pc, r3 + +/* + * Restore crunch state from given memory address + * + * r0 = struct thread_info pointer of target task + * r1 = memory address where to get crunch state from + * + * this is used to restore crunch state when unwinding a signal stack frame + */ +ENTRY(crunch_task_restore) + mrs ip, cpsr + orr r2, ip, #PSR_I_BIT @ disable interrupts + msr cpsr_c, r2 + + ldr r3, =crunch_owner + add r2, r0, #TI_CRUNCH_STATE @ get task crunch save area + ldr r3, [r3] @ get current crunch owner + teq r2, r3 @ does this task own it... + beq 1f + + @ this task doesn't own crunch regs -- use its save area + msr cpsr_c, ip @ restore interrupt mode + mov r0, r2 + mov r2, #CRUNCH_SIZE + b memcpy + +1: @ this task owns crunch regs -- load them directly + mov r0, r1 + mov r1, #0 @ nothing to save + mov r3, lr @ preserve return address + bl crunch_load + msr cpsr_c, ip @ restore interrupt mode + mov pc, r3 diff --git a/arch/arm/mach-ep93xx/crunch.c b/arch/arm/mach-ep93xx/crunch.c new file mode 100644 index 00000000000..a4a2ab9648c --- /dev/null +++ b/arch/arm/mach-ep93xx/crunch.c @@ -0,0 +1,88 @@ +/* + * arch/arm/kernel/crunch.c + * Cirrus MaverickCrunch context switching and handling + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/thread_notify.h> + +#include "soc.h" + +struct crunch_state *crunch_owner; + +void crunch_task_release(struct thread_info *thread) +{ + local_irq_disable(); + if (crunch_owner == &thread->crunchstate) + crunch_owner = NULL; + local_irq_enable(); +} + +static int crunch_enabled(u32 devcfg) +{ + return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA); +} + +static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t) +{ + struct thread_info *thread = (struct thread_info *)t; + struct crunch_state *crunch_state; + u32 devcfg; + + crunch_state = &thread->crunchstate; + + switch (cmd) { + case THREAD_NOTIFY_FLUSH: + memset(crunch_state, 0, sizeof(*crunch_state)); + + /* + * FALLTHROUGH: Ensure we don't try to overwrite our newly + * initialised state information on the first fault. + */ + + case THREAD_NOTIFY_EXIT: + crunch_task_release(thread); + break; + + case THREAD_NOTIFY_SWITCH: + devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG); + if (crunch_enabled(devcfg) || crunch_owner == crunch_state) { + /* + * We don't use ep93xx_syscon_swlocked_write() here + * because we are on the context switch path and + * preemption is already disabled. + */ + devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA; + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); + __raw_writel(devcfg, EP93XX_SYSCON_DEVCFG); + } + break; + } + + return NOTIFY_DONE; +} + +static struct notifier_block crunch_notifier_block = { + .notifier_call = crunch_do, +}; + +int __init crunch_init(void) +{ + thread_register_notifier(&crunch_notifier_block); + elf_hwcap |= HWCAP_CRUNCH; + + return 0; +} diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c index 5a257088125..d8bfd02f504 100644 --- a/arch/arm/mach-ep93xx/dma.c +++ b/arch/arm/mach-ep93xx/dma.c @@ -25,9 +25,11 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <mach/dma.h> +#include <linux/platform_data/dma-ep93xx.h> #include <mach/hardware.h> +#include "soc.h" + #define DMA_CHANNEL(_name, _base, _irq) \ { .name = (_name), .base = (_base), .irq = (_irq) } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index d115653edca..27b14ae92c7 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -35,14 +35,14 @@ #include <sound/cs4271.h> #include <mach/hardware.h> -#include <mach/fb.h> -#include <mach/ep93xx_spi.h> +#include <linux/platform_data/video-ep93xx.h> +#include <linux/platform_data/spi-ep93xx.h> #include <mach/gpio-ep93xx.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" static void __init edb93xx_register_flash(void) { @@ -90,8 +90,8 @@ static void __init edb93xx_register_i2c(void) ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xxa_i2c_board_info, ARRAY_SIZE(edb93xxa_i2c_board_info)); - } else if (machine_is_edb9307() || machine_is_edb9312() || - machine_is_edb9315()) { + } else if (machine_is_edb9302() || machine_is_edb9307() + || machine_is_edb9312() || machine_is_edb9315()) { ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); @@ -232,6 +232,29 @@ static void __init edb93xx_register_fb(void) } +/************************************************************************* + * EDB93xx IDE + *************************************************************************/ +static int __init edb93xx_has_ide(void) +{ + /* + * Although EDB9312 and EDB9315 do have IDE capability, they have + * INTRQ line wired as pull-up, which makes using IDE interface + * problematic. + */ + return machine_is_edb9312() || machine_is_edb9315() || + machine_is_edb9315a(); +} + +static void __init edb93xx_register_ide(void) +{ + if (!edb93xx_has_ide()) + return; + + ep93xx_register_ide(); +} + + static void __init edb93xx_init_machine(void) { ep93xx_init_devices(); @@ -242,6 +265,7 @@ static void __init edb93xx_init_machine(void) edb93xx_register_i2s(); edb93xx_register_pwm(); edb93xx_register_fb(); + edb93xx_register_ide(); } @@ -251,9 +275,9 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif @@ -264,9 +288,9 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif @@ -277,9 +301,9 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif @@ -290,9 +314,9 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif @@ -303,9 +327,9 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif @@ -316,9 +340,9 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif @@ -329,9 +353,9 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif @@ -342,9 +366,9 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index af46970dc58..0cca5b18330 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -13,13 +13,14 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/sizes.h> #include <mach/hardware.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" static struct ep93xx_eth_data __initdata gesbc9312_eth_data = { .phy_id = 1, @@ -37,8 +38,8 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = gesbc9312_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S deleted file mode 100644 index af54e43132c..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/debug-macro.S - * Debugging macro include header - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ -#include <mach/ep93xx-regs.h> - - .macro addruart, rp, rv, tmp - ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base - ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base - orr \rp, \rp, #0x000c0000 - orr \rv, \rv, #0x000c0000 - .endm - -#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h deleted file mode 100644 index e82c642fa53..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ /dev/null @@ -1,93 +0,0 @@ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include <linux/types.h> -#include <linux/dmaengine.h> -#include <linux/dma-mapping.h> - -/* - * M2P channels. - * - * Note that these values are also directly used for setting the PPALLOC - * register. - */ -#define EP93XX_DMA_I2S1 0 -#define EP93XX_DMA_I2S2 1 -#define EP93XX_DMA_AAC1 2 -#define EP93XX_DMA_AAC2 3 -#define EP93XX_DMA_AAC3 4 -#define EP93XX_DMA_I2S3 5 -#define EP93XX_DMA_UART1 6 -#define EP93XX_DMA_UART2 7 -#define EP93XX_DMA_UART3 8 -#define EP93XX_DMA_IRDA 9 -/* M2M channels */ -#define EP93XX_DMA_SSP 10 -#define EP93XX_DMA_IDE 11 - -/** - * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine - * @port: peripheral which is requesting the channel - * @direction: TX/RX channel - * @name: optional name for the channel, this is displayed in /proc/interrupts - * - * This information is passed as private channel parameter in a filter - * function. Note that this is only needed for slave/cyclic channels. For - * memcpy channels %NULL data should be passed. - */ -struct ep93xx_dma_data { - int port; - enum dma_transfer_direction direction; - const char *name; -}; - -/** - * struct ep93xx_dma_chan_data - platform specific data for a DMA channel - * @name: name of the channel, used for getting the right clock for the channel - * @base: mapped registers - * @irq: interrupt number used by this channel - */ -struct ep93xx_dma_chan_data { - const char *name; - void __iomem *base; - int irq; -}; - -/** - * struct ep93xx_dma_platform_data - platform data for the dmaengine driver - * @channels: array of channels which are passed to the driver - * @num_channels: number of channels in the array - * - * This structure is passed to the DMA engine driver via platform data. For - * M2P channels, contract is that even channels are for TX and odd for RX. - * There is no requirement for the M2M channels. - */ -struct ep93xx_dma_platform_data { - struct ep93xx_dma_chan_data *channels; - size_t num_channels; -}; - -static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); -} - -/** - * ep93xx_dma_chan_direction - returns direction the channel can be used - * @chan: channel - * - * This function can be used in filter functions to find out whether the - * channel supports given DMA direction. Only M2P channels have such - * limitation, for M2M channels the direction is configurable. - */ -static inline enum dma_transfer_direction -ep93xx_dma_chan_direction(struct dma_chan *chan) -{ - if (!ep93xx_dma_chan_is_m2p(chan)) - return DMA_NONE; - - /* even channels are for TX, odd for RX */ - return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; -} - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S deleted file mode 100644 index 9be6edcf904..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/entry-macro.S +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/entry-macro.S - * IRQ demultiplexing for EP93xx - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index c4a7b84ef06..c64d7424660 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -6,40 +6,6 @@ #define __ASM_ARCH_EP93XX_REGS_H /* - * EP93xx Physical Memory Map: - * - * The ASDO pin is sampled at system reset to select a synchronous or - * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up) - * the synchronous boot mode is selected. When ASDO is "0" (i.e - * pulled-down) the asynchronous boot mode is selected. - * - * In synchronous boot mode nSDCE3 is decoded starting at physical address - * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous - * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3 - * decoded at 0xf0000000. - * - * There is known errata for the EP93xx dealing with External Memory - * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design - * Guidelines" for more information. This document can be found at: - * - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - -#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */ -#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */ -#define EP93XX_CS1_PHYS_BASE 0x10000000 -#define EP93XX_CS2_PHYS_BASE 0x20000000 -#define EP93XX_CS3_PHYS_BASE 0x30000000 -#define EP93XX_PCMCIA_PHYS_BASE 0x40000000 -#define EP93XX_CS6_PHYS_BASE 0x60000000 -#define EP93XX_CS7_PHYS_BASE 0x70000000 -#define EP93XX_SDCE0_PHYS_BASE 0xc0000000 -#define EP93XX_SDCE1_PHYS_BASE 0xd0000000 -#define EP93XX_SDCE2_PHYS_BASE 0xe0000000 -#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */ -#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */ - -/* * EP93xx linux memory map: * * virt phys size @@ -62,58 +28,7 @@ #define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x)) #define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x)) - -/* AHB peripherals */ -#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) - -#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) -#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) - -#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) -#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) - -#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) -#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) - -#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) - -#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) - -#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) - -#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) - -#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) - -#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) - -#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) - - -/* APB peripherals */ -#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) - -#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) -#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) - -#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) - -#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) -#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) -#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) -#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) - -#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000) -#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) - -#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) -#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) - -#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) - +/* APB UARTs */ #define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000) #define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000) @@ -123,108 +38,4 @@ #define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000) #define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) -#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) -#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) - -#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) -#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) - -#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) -#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) - -#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) -#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) - -#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) -#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) -#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) -#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) -#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28) -#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27) -#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17) -#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16) -#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) -#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) -#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20) -#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23) -#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24) -#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19) -#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18) -#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) -#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) -#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) -#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) -#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) -#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) -#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) -#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24) -#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) -#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) -#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) -#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20) -#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) -#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18) -#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) -#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) -#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) -#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) -#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) -#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) -#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) -#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) -#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) -#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) -#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) -#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) -#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) -#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) -#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) -#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) -#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84) -#define EP93XX_SYSCON_CLKDIV_ENABLE (1<<15) -#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) -#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) -#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 -#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) -#define EP93XX_SYSCON_I2SCLKDIV_SENA (1<<31) -#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) -#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) -#define EP93XX_I2SCLKDIV_SDIV (1 << 16) -#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) -#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) -#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) -#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) -#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) -#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31) -#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) -#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15) -#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) -#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) -#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) -#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) -#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) -#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) -#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) -#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) -#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) -#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) -#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) -#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) -#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) - -#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) - - #endif diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h deleted file mode 100644 index 1e2f4e97f42..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h - */ - -#ifndef __ASM_ARCH_EP93XX_KEYPAD_H -#define __ASM_ARCH_EP93XX_KEYPAD_H - -struct matrix_keymap_data; - -/* flags for the ep93xx_keypad driver */ -#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ -#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ -#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ -#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ -#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ -#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ - -/** - * struct ep93xx_keypad_platform_data - platform specific device structure - * @keymap_data: pointer to &matrix_keymap_data - * @debounce: debounce start count; terminal count is 0xff - * @prescale: row/column counter pre-scaler load value - * @flags: see above - */ -struct ep93xx_keypad_platform_data { - struct matrix_keymap_data *keymap_data; - unsigned int debounce; - unsigned int prescale; - unsigned int flags; -}; - -#define EP93XX_MATRIX_ROWS (8) -#define EP93XX_MATRIX_COLS (8) - -#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h deleted file mode 100644 index 9bb63ac13f0..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASM_MACH_EP93XX_SPI_H -#define __ASM_MACH_EP93XX_SPI_H - -struct spi_device; - -/** - * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @num_chipselect: number of chip selects on this board, must be - * at least one - * @use_dma: use DMA for the transfers - */ -struct ep93xx_spi_info { - int num_chipselect; - bool use_dma; -}; - -/** - * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device - * @setup: setup the chip select mechanism - * @cleanup: cleanup the chip select mechanism - * @cs_control: control the device chip select - */ -struct ep93xx_spi_chip_ops { - int (*setup)(struct spi_device *spi); - void (*cleanup)(struct spi_device *spi); - void (*cs_control)(struct spi_device *spi, int value); -}; - -#endif /* __ASM_MACH_EP93XX_SPI_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/fb.h b/arch/arm/mach-ep93xx/include/mach/fb.h deleted file mode 100644 index d5ae11d7c45..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/fb.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/fb.h - */ - -#ifndef __ASM_ARCH_EP93XXFB_H -#define __ASM_ARCH_EP93XXFB_H - -struct platform_device; -struct fb_videomode; -struct fb_info; - -#define EP93XXFB_USE_MODEDB 0 - -/* VideoAttributes flags */ -#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0) -#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1) -#define EP93XXFB_VSYNC_ENABLE (1 << 2) -#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3) -#define EP93XXFB_COMPOSITE_SYNC (1 << 4) -#define EP93XXFB_SYNC_VERT_HIGH (1 << 5) -#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6) -#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7) -#define EP93XXFB_PCLK_FALLING (1 << 8) -#define EP93XXFB_ENABLE_AC (1 << 9) -#define EP93XXFB_ENABLE_LCD (1 << 10) -#define EP93XXFB_ENABLE_CCIR (1 << 12) -#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13) -#define EP93XXFB_ENABLE_INTERRUPT (1 << 14) -#define EP93XXFB_USB_INTERLACE (1 << 16) -#define EP93XXFB_USE_EQUALIZATION (1 << 17) -#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18) -#define EP93XXFB_USE_DOUBLE_VERT (1 << 19) -#define EP93XXFB_USE_BLANK_PIXEL (1 << 20) -#define EP93XXFB_USE_SDCSN0 (0 << 21) -#define EP93XXFB_USE_SDCSN1 (1 << 21) -#define EP93XXFB_USE_SDCSN2 (2 << 21) -#define EP93XXFB_USE_SDCSN3 (3 << 21) - -#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \ - EP93XXFB_PIXEL_CLOCK_ENABLE | \ - EP93XXFB_VSYNC_ENABLE | \ - EP93XXFB_PIXEL_DATA_ENABLE) - -struct ep93xxfb_mach_info { - unsigned int num_modes; - const struct fb_videomode *modes; - const struct fb_videomode *default_mode; - int bpp; - unsigned int flags; - - int (*setup)(struct platform_device *pdev); - void (*teardown)(struct platform_device *pdev); - void (*blank)(int blank_mode, struct fb_info *info); -}; - -#endif /* __ASM_ARCH_EP93XXFB_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h index 8aff2ea3587..6d7c571a519 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h @@ -3,6 +3,16 @@ #ifndef __GPIO_EP93XX_H #define __GPIO_EP93XX_H +#include <mach/ep93xx-regs.h> + +#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) +#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) +#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) +#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) +#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) +#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) +#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) + /* GPIO port A. */ #define EP93XX_GPIO_LINE_A(x) ((x) + 0) #define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h deleted file mode 100644 index 40a8c178f10..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/gpio.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h index 4df842897ea..efcd47815a9 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/include/mach/hardware.h @@ -5,7 +5,6 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <mach/ep93xx-regs.h> #include <mach/platform.h> /* diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h deleted file mode 100644 index 594b77f2105..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/io.h - */ - -#ifndef __ASM_MACH_IO_H -#define __ASM_MACH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(p) __typesafe_io(p) -#define __mem_pci(p) (p) - -/* - * A typesafe __io() variation for variable initialisers - */ -#ifdef __ASSEMBLER__ -#define IOMEM(p) p -#else -#define IOMEM(p) ((void __iomem __force *)(p)) -#endif - -#endif /* __ASM_MACH_IO_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index d4c934931f9..4c0bbd97f74 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -4,6 +4,9 @@ #ifndef __ASSEMBLY__ +#include <linux/reboot.h> + +struct device; struct i2c_gpio_platform_data; struct i2c_board_info; struct spi_board_info; @@ -21,20 +24,6 @@ struct ep93xx_eth_data void ep93xx_map_io(void); void ep93xx_init_irq(void); -/* EP93xx System Controller software locked register write */ -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); - -static inline void ep93xx_devcfg_set_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(bits, 0x00); -} - -static inline void ep93xx_devcfg_clear_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(0x00, bits); -} - #define EP93XX_CHIP_REV_D0 3 #define EP93XX_CHIP_REV_D1 4 #define EP93XX_CHIP_REV_E0 5 @@ -59,13 +48,23 @@ void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); void ep93xx_keypad_release_gpio(struct platform_device *pdev); void ep93xx_register_i2s(void); -int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config); +int ep93xx_i2s_acquire(void); void ep93xx_i2s_release(void); void ep93xx_register_ac97(void); +void ep93xx_register_ide(void); +int ep93xx_ide_acquire_gpio(struct platform_device *pdev); +void ep93xx_ide_release_gpio(struct platform_device *pdev); -void ep93xx_init_devices(void); -extern struct sys_timer ep93xx_timer; +struct device *ep93xx_init_devices(void); +extern void ep93xx_timer_init(void); -void ep93xx_restart(char, const char *); +void ep93xx_restart(enum reboot_mode, const char *); +void ep93xx_init_late(void); + +#ifdef CONFIG_CRUNCH +int crunch_init(void); +#else +static inline int crunch_init(void) { return 0; } +#endif #endif diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h deleted file mode 100644 index b5bec7cb9b5..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/system.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/system.h - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h deleted file mode 100644 index 6b3503b01fa..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/timex.h - */ - -#define CLOCK_TICK_RATE 983040 diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index 16026c2b1c8..03c42e5400d 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -31,26 +31,16 @@ static void __raw_writel(unsigned int value, unsigned int ptr) *((volatile unsigned int *)ptr) = value; } -#if defined(CONFIG_EP93XX_EARLY_UART1) -#define UART_BASE EP93XX_UART1_PHYS_BASE -#elif defined(CONFIG_EP93XX_EARLY_UART2) -#define UART_BASE EP93XX_UART2_PHYS_BASE -#elif defined(CONFIG_EP93XX_EARLY_UART3) -#define UART_BASE EP93XX_UART3_PHYS_BASE -#else -#define UART_BASE EP93XX_UART1_PHYS_BASE -#endif - -#define PHYS_UART_DATA (UART_BASE + 0x00) -#define PHYS_UART_FLAG (UART_BASE + 0x18) +#define PHYS_UART_DATA (CONFIG_DEBUG_UART_PHYS + 0x00) +#define PHYS_UART_FLAG (CONFIG_DEBUG_UART_PHYS + 0x18) #define UART_FLAG_TXFF 0x20 static inline void putc(int c) { int i; - for (i = 0; i < 1000; i++) { - /* Transmit fifo not full? */ + for (i = 0; i < 10000; i++) { + /* Transmit fifo not full? */ if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) break; } @@ -90,5 +80,3 @@ static void arch_decomp_setup(void) { ethernet_reset(); } - -#define arch_decomp_wdog() diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 7b98084f0c9..373583c2982 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -18,10 +18,10 @@ #include <mach/hardware.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" /************************************************************************* * Micro9 NOR Flash @@ -81,9 +81,9 @@ MACHINE_START(MICRO9, "Contec Micro9-High") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif @@ -94,9 +94,9 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif @@ -107,9 +107,9 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif @@ -120,9 +120,9 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index f4e553eca21..36f22c1a31f 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -22,13 +22,14 @@ #include <linux/i2c-gpio.h> #include <mach/hardware.h> -#include <mach/fb.h> +#include <linux/platform_data/video-ep93xx.h> #include <mach/gpio-ep93xx.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" + static struct ep93xx_eth_data __initdata simone_eth_data = { .phy_id = 1, }; @@ -81,8 +82,8 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = simone_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index fd846331ddf..aa86f86638d 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -28,13 +28,14 @@ #include <linux/mtd/nand.h> #include <mach/hardware.h> -#include <mach/fb.h> +#include <linux/platform_data/video-ep93xx.h> #include <mach/gpio-ep93xx.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "soc.h" + #define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M) #define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */ @@ -80,8 +81,6 @@ static int snappercl15_nand_dev_ready(struct mtd_info *mtd) return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY); } -static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL}; - static struct mtd_partition snappercl15_nand_parts[] = { { .name = "Kernel", @@ -98,10 +97,8 @@ static struct mtd_partition snappercl15_nand_parts[] = { static struct platform_nand_data snappercl15_nand_data = { .chip = { .nr_chips = 1, - .part_probe_types = snappercl15_nand_part_probes, .partitions = snappercl15_nand_parts, .nr_partitions = ARRAY_SIZE(snappercl15_nand_parts), - .options = NAND_NO_AUTOINCR, .chip_delay = 25, }, .ctrl = { @@ -178,8 +175,8 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = snappercl15_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h new file mode 100644 index 00000000000..7bf7ff8beae --- /dev/null +++ b/arch/arm/mach-ep93xx/soc.h @@ -0,0 +1,214 @@ +/* + * arch/arm/mach-ep93xx/soc.h + * + * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com> + * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#ifndef _EP93XX_SOC_H +#define _EP93XX_SOC_H + +#include <mach/ep93xx-regs.h> + +/* + * EP93xx Physical Memory Map: + * + * The ASDO pin is sampled at system reset to select a synchronous or + * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up) + * the synchronous boot mode is selected. When ASDO is "0" (i.e + * pulled-down) the asynchronous boot mode is selected. + * + * In synchronous boot mode nSDCE3 is decoded starting at physical address + * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous + * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3 + * decoded at 0xf0000000. + * + * There is known errata for the EP93xx dealing with External Memory + * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design + * Guidelines" for more information. This document can be found at: + * + * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf + */ + +#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */ +#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */ +#define EP93XX_CS1_PHYS_BASE 0x10000000 +#define EP93XX_CS2_PHYS_BASE 0x20000000 +#define EP93XX_CS3_PHYS_BASE 0x30000000 +#define EP93XX_PCMCIA_PHYS_BASE 0x40000000 +#define EP93XX_CS6_PHYS_BASE 0x60000000 +#define EP93XX_CS7_PHYS_BASE 0x70000000 +#define EP93XX_SDCE0_PHYS_BASE 0xc0000000 +#define EP93XX_SDCE1_PHYS_BASE 0xd0000000 +#define EP93XX_SDCE2_PHYS_BASE 0xe0000000 +#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */ +#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */ + +/* AHB peripherals */ +#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) + +#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) +#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) + +#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) +#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) + +#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) +#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) + +#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) + +#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) + +#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) + +#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) + +#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000) +#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) + +#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) + +#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) + +/* APB peripherals */ +#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) + +#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) +#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) + +#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) + +#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000) +#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) + +#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) +#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) + +#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) + +#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) +#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) + +#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) +#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) + +#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) +#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) + +#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) +#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) + +#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000) +#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) + +/* System controller */ +#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) +#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) +#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) +#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) +#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) +#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) +#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16) +#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) +#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) +#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20) +#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23) +#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24) +#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19) +#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18) +#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) +#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) +#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) +#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) +#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) +#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) +#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) +#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) +#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24) +#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) +#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) +#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) +#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20) +#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) +#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18) +#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) +#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) +#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) +#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) +#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) +#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) +#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) +#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) +#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) +#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) +#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) +#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) +#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) +#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) +#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) +#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) +#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84) +#define EP93XX_SYSCON_CLKDIV_ENABLE (1<<15) +#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) +#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) +#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 +#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) +#define EP93XX_SYSCON_I2SCLKDIV_SENA (1<<31) +#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) +#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) +#define EP93XX_I2SCLKDIV_SDIV (1 << 16) +#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) +#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) +#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) +#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) +#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) +#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31) +#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) +#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15) +#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) +#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) +#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) +#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) +#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) +#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) +#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) +#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) +#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) +#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) +#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) +#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) +#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) + +/* EP93xx System Controller software locked register write */ +void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); +void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); + +static inline void ep93xx_devcfg_set_bits(unsigned int bits) +{ + ep93xx_devcfg_set_clear(bits, 0x00); +} + +static inline void ep93xx_devcfg_clear_bits(unsigned int bits) +{ + ep93xx_devcfg_set_clear(0x00, bits); +} + +#endif /* _EP93XX_SOC_H */ diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 79f8ecf07a1..61f4b5dc4d7 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -21,37 +21,37 @@ #include <linux/mtd/partitions.h> #include <mach/hardware.h> -#include <mach/ts72xx.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> +#include "soc.h" +#include "ts72xx.h" static struct map_desc ts72xx_io_desc[] __initdata = { { - .virtual = TS72XX_MODEL_VIRT_BASE, + .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE, .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE), .length = TS72XX_MODEL_SIZE, .type = MT_DEVICE, }, { - .virtual = TS72XX_OPTIONS_VIRT_BASE, + .virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE, .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE), .length = TS72XX_OPTIONS_SIZE, .type = MT_DEVICE, }, { - .virtual = TS72XX_OPTIONS2_VIRT_BASE, + .virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE, .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), .length = TS72XX_OPTIONS2_SIZE, .type = MT_DEVICE, }, { - .virtual = TS72XX_RTC_INDEX_VIRT_BASE, + .virtual = (unsigned long)TS72XX_RTC_INDEX_VIRT_BASE, .pfn = __phys_to_pfn(TS72XX_RTC_INDEX_PHYS_BASE), .length = TS72XX_RTC_INDEX_SIZE, .type = MT_DEVICE, }, { - .virtual = TS72XX_RTC_DATA_VIRT_BASE, + .virtual = (unsigned long)TS72XX_RTC_DATA_VIRT_BASE, .pfn = __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE), .length = TS72XX_RTC_DATA_SIZE, .type = MT_DEVICE, @@ -104,8 +104,6 @@ static int ts72xx_nand_device_ready(struct mtd_info *mtd) return !!(__raw_readb(addr) & 0x20); } -static const char *ts72xx_nand_part_probes[] = { "cmdlinepart", NULL }; - #define TS72XX_BOOTROM_PART_SIZE (SZ_16K) #define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M) @@ -133,7 +131,6 @@ static struct platform_nand_data ts72xx_nand_data = { .nr_chips = 1, .chip_offset = 0, .chip_delay = 15, - .part_probe_types = ts72xx_nand_part_probes, .partitions = ts72xx_nand_parts, .nr_partitions = ARRAY_SIZE(ts72xx_nand_parts), }, @@ -248,8 +245,8 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") .atag_offset = 0x100, .map_io = ts72xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = ts72xx_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h index f1397a13e76..071feaa30ad 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/ts72xx.h @@ -14,7 +14,7 @@ */ #define TS72XX_MODEL_PHYS_BASE 0x22000000 -#define TS72XX_MODEL_VIRT_BASE 0xfebff000 +#define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000) #define TS72XX_MODEL_SIZE 0x00001000 #define TS72XX_MODEL_TS7200 0x00 @@ -26,7 +26,7 @@ #define TS72XX_OPTIONS_PHYS_BASE 0x22400000 -#define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000 +#define TS72XX_OPTIONS_VIRT_BASE IOMEM(0xfebfe000) #define TS72XX_OPTIONS_SIZE 0x00001000 #define TS72XX_OPTIONS_COM2_RS485 0x02 @@ -34,18 +34,18 @@ #define TS72XX_OPTIONS2_PHYS_BASE 0x22800000 -#define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000 +#define TS72XX_OPTIONS2_VIRT_BASE IOMEM(0xfebfd000) #define TS72XX_OPTIONS2_SIZE 0x00001000 #define TS72XX_OPTIONS2_TS9420 0x04 #define TS72XX_OPTIONS2_TS9420_BOOT 0x02 -#define TS72XX_RTC_INDEX_VIRT_BASE 0xfebf9000 +#define TS72XX_RTC_INDEX_VIRT_BASE IOMEM(0xfebf9000) #define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000 #define TS72XX_RTC_INDEX_SIZE 0x00001000 -#define TS72XX_RTC_DATA_VIRT_BASE 0xfebf8000 +#define TS72XX_RTC_DATA_VIRT_BASE IOMEM(0xfebf8000) #define TS72XX_RTC_DATA_PHYS_BASE 0x11700000 #define TS72XX_RTC_DATA_SIZE 0x00001000 diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index d5fb44f16d3..6bc1c181581 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -23,21 +23,23 @@ #include <linux/mtd/partitions.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> -#include <linux/i2c/pca953x.h> +#include <linux/platform_data/pca953x.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/spi/mmc_spi.h> #include <linux/mmc/host.h> #include <mach/hardware.h> -#include <mach/fb.h> -#include <mach/ep93xx_spi.h> +#include <linux/platform_data/video-ep93xx.h> +#include <linux/platform_data/spi-ep93xx.h> #include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> +#include "soc.h" + /************************************************************************* * Static I/O mappings for the FPGA *************************************************************************/ @@ -222,62 +224,15 @@ static struct ep93xx_spi_chip_ops vision_spi_flash_hw = { #define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0) #define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15 -static struct gpio vision_spi_mmc_gpios[] = { - { VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" }, - { VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" }, -}; - -static int vision_spi_mmc_init(struct device *pdev, - irqreturn_t (*func)(int, void *), void *pdata) -{ - int err; - - err = gpio_request_array(vision_spi_mmc_gpios, - ARRAY_SIZE(vision_spi_mmc_gpios)); - if (err) - return err; - - err = gpio_set_debounce(VISION_SPI_MMC_CD, 1); - if (err) - goto exit_err; - - err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func, - IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata); - if (err) - goto exit_err; - - return 0; - -exit_err: - gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios)); - return err; - -} - -static void vision_spi_mmc_exit(struct device *pdev, void *pdata) -{ - free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata); - gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios)); -} - -static int vision_spi_mmc_get_ro(struct device *pdev) -{ - return !!gpio_get_value(VISION_SPI_MMC_WP); -} - -static int vision_spi_mmc_get_cd(struct device *pdev) -{ - return !gpio_get_value(VISION_SPI_MMC_CD); -} - static struct mmc_spi_platform_data vision_spi_mmc_data = { - .init = vision_spi_mmc_init, - .exit = vision_spi_mmc_exit, - .get_ro = vision_spi_mmc_get_ro, - .get_cd = vision_spi_mmc_get_cd, .detect_delay = 100, .powerup_msecs = 100, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO, + .cd_gpio = VISION_SPI_MMC_CD, + .cd_debounce = 1, + .ro_gpio = VISION_SPI_MMC_WP, + .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, }; static int vision_spi_mmc_hw_setup(struct spi_device *spi) @@ -361,7 +316,8 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") .atag_offset = 0x100, .map_io = vision_map_io, .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = vision_init_machine, + .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END |